)]}' { "log": [ { "commit": "0f0df2f5a2df9fde7a07d6d27ccf4c619e5bf925", "tree": "50090fd1a3effe8a6a6a29e05d9d33976ecc1dcf", "parents": [ "05fb865d7c58f2a8cb09ebe88c0af5e86c5edcf8", "4181239136b9fb0b2c000fbff691f361dc9d48e5" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 23:30:40 2012 -0700" }, "committer": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 23:30:40 2012 -0700" }, "message": "Merge branch \u0027caf\u0027 into android-msm-mako-3.4-wip\n\n* caf: (219 commits)\n usb: msm_otg: Fix error handling bug in driver probe\n bluetooth: Add support for LE conn param\n msm: ocmem: Initialize the ocmem graphics mPU\n msm: ocmem: Add support for low power clients\n msm-fb: display: Tearing issue during video playback\n ASoC: WCD9304: Fix register sequence for analog mic recording\n msm: clock-8974: Correct some audio interface clock structures.\n ASoC: wcd9310: Clear the status only for active slimbus ports\n msm: kgsl: Allow non-default timeout values in adreno_idle\n msm: cache_erp: Add device tree support\n ASOC: msm: Add device tree specific changes in compressed driver\n drivers: leds-pm8xxx: enable low power mode for RGB LED\n msm: 8974: Add function to reserve memory from device tree\n msm: clock-8974: Add block reset support for the USB cores\n msm_fb: display: Brightness change observed when switching HDMI on\n msm: mpq8064: Dummy read to prevent false interrupt from triggering\n mmc: msm_sdcc: Enable AUTO_PROG_DONE for CMD25\n msm: rpm: remove the sanity check in rpm log\n msm: camera: Add some minor code fixes.\n msm: Always compile acpuclock-krait when CONFIG_ARCH_MSM_KRAIT is set\n ...\n\nConflicts:\n\tarch/arm/mach-msm/clock-8960.c\n\tarch/arm/mach-msm/subsystem_restart.c\n\tdrivers/media/video/msm/msm_camirq_router.c\n\tdrivers/media/video/msm/msm_mctl.c\n\tdrivers/usb/gadget/f_mass_storage.c\n\tdrivers/video/msm/msm_fb.c\n\tsound/soc/msm/apq8064.c\n" }, { "commit": "05fb865d7c58f2a8cb09ebe88c0af5e86c5edcf8", "tree": "d4f6f7b4933349aba4538503b0ee42b48f853c38", "parents": [ "4576fe601adca13ce9ad34d9d746c68bf2707be8" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 22:54:11 2012 -0700" }, "committer": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 22:54:11 2012 -0700" }, "message": "Revert \"Revert \"msm: camera: Fix crash in camera on 8660\"\"\n\nThis reverts commit 748ff23c8e6a9d4706d960e1ddfab9bf5695c41f.\n" }, { "commit": "4576fe601adca13ce9ad34d9d746c68bf2707be8", "tree": "fea593cf55701994571e471bab1f247034241669", "parents": [ "6d86949698ef767f11e704a05d88877a7c4e8325" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 22:53:04 2012 -0700" }, "committer": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 22:53:04 2012 -0700" }, "message": "Revert \"Revert \"msm: camera: Initialize the vfe stats structures.\"\"\n\nThis reverts commit 26e07aa9f974cae5490299d02c7926ba57204900.\n" }, { "commit": "6d86949698ef767f11e704a05d88877a7c4e8325", "tree": "16a187a9c85eff89191246d488ea9f465f11a412", "parents": [ "16fd3cc7ab3f75970c4da5cab2f8def2ca446e9f" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 22:46:50 2012 -0700" }, "committer": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 22:46:50 2012 -0700" }, "message": "Revert \"Revert \"msm: camera: Add free status buffer queue\"\"\n\nThis reverts commit c5b01930538b85fc80aa48b4d8648f830df7e733.\n" }, { "commit": "16fd3cc7ab3f75970c4da5cab2f8def2ca446e9f", "tree": "f749fe446558ae1c4f69489a82356b8af5e1985e", "parents": [ "ec51189c8b408ecf42ba3ce5c2df5cf02867a2d1", "b6b0b65325e6f5eb5fcfd88d270f710d947f7962" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Tue Jul 31 10:38:17 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Tue Jul 31 10:38:17 2012 -0700" }, "message": "Merge \"Add heap_mask to ion_allocation_data\" into android-msm-mako-3.4-wip" }, { "commit": "ec51189c8b408ecf42ba3ce5c2df5cf02867a2d1", "tree": "db830dcd855e8e2ba0ae114f5e01f1a3413b5165", "parents": [ "823a9f62d84e70519eaf7bc221f712942ea82c6c", "47c6ca8a7329caa0255c7aa0ec4ef6e354b35dea" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Tue Jul 31 10:05:46 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Tue Jul 31 10:05:47 2012 -0700" }, "message": "Merge \"msm: restart: write restart reason for oem-xx\" into android-msm-mako-3.4-wip" }, { "commit": "b6b0b65325e6f5eb5fcfd88d270f710d947f7962", "tree": "5be708bc7caf1b2521a9f0a781dde69e2fb62afd", "parents": [ "823a9f62d84e70519eaf7bc221f712942ea82c6c" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Mon Jul 30 22:54:08 2012 -0700" }, "committer": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Mon Jul 30 23:18:30 2012 -0700" }, "message": "Add heap_mask to ion_allocation_data\n" }, { "commit": "823a9f62d84e70519eaf7bc221f712942ea82c6c", "tree": "c1833db8592ef116b7b918585d67b88e12ebbd61", "parents": [ "a2d272e0d6ba97bcedff02f2756aa333f0b6822c" ], "author": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Mon Jul 30 14:24:26 2012 -0700" }, "committer": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Mon Jul 30 14:24:26 2012 -0700" }, "message": "mako: clean up the unused nfc codes\n\nclean up the unused nfc pn544 codes. mako use broadcom nfc instead.\n\nChange-Id: Ib6ec785a82e18d31392120f5bc6049864aeb73f6\n" }, { "commit": "a2d272e0d6ba97bcedff02f2756aa333f0b6822c", "tree": "942ee21bf6bdd72d3cca066e783cf5f0c01d3817", "parents": [ "281dfebede57bbf03df82fd4f89f428b53fd619f" ], "author": { "name": "wongab.jeon", "email": "wongab.jeon@lge.com", "time": "Wed Jul 18 21:49:59 2012 +0900" }, "committer": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Mon Jul 30 12:17:30 2012 -0700" }, "message": "mako: nfc: add new nfc broadcom driver\n\nChange-Id: I3b06a3c77c8d935798fcbdb627a7fca983503d08\n" }, { "commit": "47c6ca8a7329caa0255c7aa0ec4ef6e354b35dea", "tree": "36662cddac89529ce97a8d3e2d0aaa7c765dfc49", "parents": [ "281dfebede57bbf03df82fd4f89f428b53fd619f" ], "author": { "name": "eunyoung.shin", "email": "eunyoung.shin@lge.com", "time": "Thu Jul 26 21:25:58 2012 +0900" }, "committer": { "name": "eunyoung.shin", "email": "eunyoung.shin@lge.com", "time": "Mon Jul 30 16:14:46 2012 +0900" }, "message": "msm: restart: write restart reason for oem-xx\n\nChange-Id: I5970fa8237492f58f32a798f30f15ece3646c2d8\n" }, { "commit": "281dfebede57bbf03df82fd4f89f428b53fd619f", "tree": "801f4a745364233ce3d22a47a1de94b75c68a424", "parents": [ "451a1759daa4173d8b98bd0a7b7b971e1801b33f" ], "author": { "name": "jaekyung.oh", "email": "jaekyung.oh@lge.com", "time": "Thu Jul 26 10:14:20 2012 +0900" }, "committer": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Sun Jul 29 18:06:12 2012 -0700" }, "message": "mako: display: fixed lcd blink in the first boot.\n\nVGL/VGH power generation is reenabled when first boot.\nSo Skip this routine when booting.\n" }, { "commit": "451a1759daa4173d8b98bd0a7b7b971e1801b33f", "tree": "24b33b4e90e174c3aff1f8d598855e9e23e87e94", "parents": [ "6129f41215c83d8990ba8128e56a03a39806a150", "b84c147f7e712b0d9d8abbb09f2070d547c378db" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Sat Jul 28 15:44:25 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Sat Jul 28 15:44:25 2012 -0700" }, "message": "Merge \"backlight: lm3530: add level setting to bl_set_intensity()\" into android-msm-mako-3.4-wip" }, { "commit": "6129f41215c83d8990ba8128e56a03a39806a150", "tree": "8902eaa8dcd7614c2b9eae4da320ee9635ceb315", "parents": [ "38b066866f4bd59a4e0c4f07804496644c80d8fc" ], "author": { "name": "jaekyung.oh", "email": "jaekyung.oh@lge.com", "time": "Mon Jul 23 19:38:26 2012 +0900" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Sat Jul 28 15:39:48 2012 -0700" }, "message": "mako: display: update lcd initial code\n\nupdate lcd initial code for tunned IEF values and CABC dimming control.\n\nChange-Id: Ie6b665fd811bd2a213f544e0fa7b0b5e1f3bea08\n" }, { "commit": "38b066866f4bd59a4e0c4f07804496644c80d8fc", "tree": "b013e301c2fe9cfc74add039d03f06cae1096c89", "parents": [ "e6f596dbcd307e33e4e4842914a027c7f7138bd9" ], "author": { "name": "Jongrak Kwon", "email": "jongrak.kwon@lge.com", "time": "Fri Jul 27 15:50:34 2012 -0700" }, "committer": { "name": "Jongrak Kwon", "email": "jongrak.kwon@lge.com", "time": "Fri Jul 27 15:59:21 2012 -0700" }, "message": "mako: touch: PLG137 firmware E004 udpate\n\nNoise reduction.\n\nChange-Id: I29a44e0b1a1d2f64acef527177b38b7786492e63\n" }, { "commit": "b84c147f7e712b0d9d8abbb09f2070d547c378db", "tree": "c236dfedddd56bdf323919d4d3caecbbb80c7953", "parents": [ "e6f596dbcd307e33e4e4842914a027c7f7138bd9" ], "author": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Thu Jul 26 14:09:57 2012 -0700" }, "committer": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Thu Jul 26 18:08:18 2012 -0700" }, "message": "backlight: lm3530: add level setting to bl_set_intensity()\n\nWhen application calls FBIOBLANK ioctl without backlight control,\neven though bl_set_intensity() is called by fb_notifier_callback,\nthe backlight level cannot be set properly. So this patch add the\nlevel changing to bl_set_intensity().\n\nChange-Id: Id512c2f1bffbde2d47186d40071d05bc1388dc03\n" }, { "commit": "e6f596dbcd307e33e4e4842914a027c7f7138bd9", "tree": "c48f67f582c9201462aedc910a093aabad6f7e9d", "parents": [ "f17e1e3fa43ef7d5461cd6f48f41394ea7644c8c" ], "author": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Thu Jul 26 09:33:21 2012 -0700" }, "committer": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Thu Jul 26 11:11:20 2012 -0700" }, "message": "mako: display: change color value to displayed in case of underflow\n\nIn case of data underflow, MDP display specific color on lcd.\nDue to data underflow rarely happen during display on/off,\nwe can see unintended blue screen at that time.\nSo this patch changes this underflow control color from blue to black\nfor hiding unintended blue image displaying during display on/off.\n\nChange-Id: I26910065b5210a2571125d25f3f1b41a67ba1c1c\n" }, { "commit": "f17e1e3fa43ef7d5461cd6f48f41394ea7644c8c", "tree": "ead2311698c4f2ee05c51dec12e5406068024b3b", "parents": [ "c49f80dded0ca2208190c7fd2a54fcfacc9e14a9" ], "author": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Mon Jul 23 13:57:01 2012 -0700" }, "committer": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Thu Jul 26 10:52:38 2012 -0700" }, "message": "mako: display: enable lcd color temperature calibration\n\nAdd lcd color temperature calibration interface and apply\nthe calibrated value to the target using mdp lut.\n\nChange-Id: Ibdd606a155e0d7708ba79be6f817c3d89b51a282\n" }, { "commit": "c49f80dded0ca2208190c7fd2a54fcfacc9e14a9", "tree": "39d8d8f9e0c051fdd180a15f9800e4c98756661c", "parents": [ "476bbd73f8efd47c2856be4310cf10800bb01b89" ], "author": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Wed Jul 25 17:27:03 2012 -0700" }, "committer": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Wed Jul 25 17:36:24 2012 -0700" }, "message": "mako: defconfig: enable TUN/TAP device driver\n\nChange-Id: I9d087b7ed2d8f5fff4688f1b4a4fce2b8a17679b\n" }, { "commit": "476bbd73f8efd47c2856be4310cf10800bb01b89", "tree": "b768b877a29f68ca4d5e2c3d0a3c31b375cf313f", "parents": [ "59a27a806fe8b754f12ac33880d04c14583ecf07" ], "author": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Thu Jul 19 18:11:11 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Wed Jul 25 01:10:45 2012 -0700" }, "message": "msm: reduce verbose messages from runtime suspend/resume\n\nchange the message level from info into debug\n\nChange-Id: Ic71c11a653c53bf65b73c1e4ee639a83ea7588b6\n" }, { "commit": "59a27a806fe8b754f12ac33880d04c14583ecf07", "tree": "0419a769a547d76ef23c815667258b40983260f5", "parents": [ "1ff608a341b87defa586ca4a24d0bd89abfdfbb3", "ddb270e4a32718914cd87abce2cecece01cb27b5" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Tue Jul 24 18:41:30 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Tue Jul 24 18:41:30 2012 -0700" }, "message": "Merge \"mako: power: enable wirelesscharger(WLC)\" into android-msm-mako-3.4-wip" }, { "commit": "ddb270e4a32718914cd87abce2cecece01cb27b5", "tree": "c4e18bbbe80384139a2451bfc3a7c92c45c0d385", "parents": [ "0f40bd55ffc47d867c9fb326b4ad5408d064e292" ], "author": { "name": "kyungtae.oh", "email": "kyungtae.oh@lge.com", "time": "Thu Jul 19 14:33:50 2012 +0900" }, "committer": { "name": "kyungtae.oh", "email": "kyungtae.oh@lge.com", "time": "Wed Jul 25 08:20:15 2012 +0900" }, "message": "mako: power: enable wirelesscharger(WLC)\n\nChange-Id: If1abee69da4943f465be17416b7323e9849ed147\n" }, { "commit": "4181239136b9fb0b2c000fbff691f361dc9d48e5", "tree": "48249f5a8a917c7028b4fc7e8347429354f73366", "parents": [ "a0e51df06ec6d5462ac04b043442e28cef7c56f4" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Fri Jul 13 15:26:20 2012 -0700" }, "committer": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Tue Jul 24 16:13:21 2012 -0700" }, "message": "usb: msm_otg: Fix error handling bug in driver probe\n\nDriver probe is returning 0(success) in case of error\nreturned by APIs called in msm_otg_probe(). This is causing\nNULL pointer exceptions during system wide suspend as\ndriver data for platform device is not set.\n\nCRs-Fixed: 379532\nChange-Id: I194e9386ba8de6d88ab102a467793f8b2f03083a\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "a0e51df06ec6d5462ac04b043442e28cef7c56f4", "tree": "ebb7a7319ba6016bad2fb7946caa124f4953ccc0", "parents": [ "5efcaffa375661405956be27dfd13551fa555530", "d526d1ee365797c226d1a0d72769b09425a1fd0d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 14:54:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 14:54:18 2012 -0700" }, "message": "Merge \"msm: kgsl: Allow non-default timeout values in adreno_idle\" into msm-3.4" }, { "commit": "5efcaffa375661405956be27dfd13551fa555530", "tree": "7e0b1d598769b67f4c4e825e45c7c8499c7b92ce", "parents": [ "724a2c18ca85f5b97b5ea67945d4721e6bbd496a", "3a46ff33c8cb4c83d2e13ff21fb7aa5b10d09b81" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 14:54:16 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 14:54:16 2012 -0700" }, "message": "Merge \"ASoC: msm: Fix crash during FM recording.\" into msm-3.4" }, { "commit": "724a2c18ca85f5b97b5ea67945d4721e6bbd496a", "tree": "d6c1b41620bf3e323b3c744661569afa79a657a2", "parents": [ "86a9cf113310fff2f5e8b854329f0047b51b7d48", "f5a8e3880c0b00696914067f9edb69fd31496940" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 14:54:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 14:54:14 2012 -0700" }, "message": "Merge \"msm_fb: display: Brightness change observed when switching HDMI on\" into msm-3.4" }, { "commit": "86a9cf113310fff2f5e8b854329f0047b51b7d48", "tree": "f63573025cce38bb15dea8fa898de1c684fdfcb9", "parents": [ "0542bc06450951a41bd279ad66eea9c5575eadea", "84e7b7b2939eae73ca76e89734c89ef161df9ac0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 12:12:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 12:12:32 2012 -0700" }, "message": "Merge \"STMicroelectronics LIS3DH device driver version 1.1.0\" into msm-3.4" }, { "commit": "0542bc06450951a41bd279ad66eea9c5575eadea", "tree": "adff31dc5e02fec374f74d41539f6d4b13a1df80", "parents": [ "778854f9b2defa56aa1d1992c818a40243803c33", "a42b50244cdb71f93bf842a28b0fc1cecc622c55" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 12:12:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 12:12:28 2012 -0700" }, "message": "Merge \"bluetooth: Add support for LE conn param\" into msm-3.4" }, { "commit": "778854f9b2defa56aa1d1992c818a40243803c33", "tree": "07d54c47ce609ed125bffa67cb90d6b65d3d3856", "parents": [ "3bdb8b1190eea87286172f59a9108f2150732ceb", "1ebbfadacd91fcbdb827d6797d4650e0a5cb2cd7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 12:12:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 12:12:28 2012 -0700" }, "message": "Merge \"msm: ocmem: Initialize the ocmem graphics mPU\" into msm-3.4" }, { "commit": "3bdb8b1190eea87286172f59a9108f2150732ceb", "tree": "781419446ba2a506c1f0f594d502b5da602085fb", "parents": [ "eec28e96a42079c6802a1cfdb2b41f27a85317e4", "e2601aeae313ed7c34026bfaf3eb2b5ec7822d5d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 12:12:27 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 12:12:27 2012 -0700" }, "message": "Merge \"ASoC: 8930: add multi channel support for hdmi\" into msm-3.4" }, { "commit": "eec28e96a42079c6802a1cfdb2b41f27a85317e4", "tree": "cb4e192e8d6012685bd736cbbca42c82b5476ad9", "parents": [ "f3887ef1d2a2edd9fb605cd2c7326ce39e59e429", "f3b1a19dd9c006e88a2a2dcf63e86cdf4ac3fc6d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 08:32:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 08:32:12 2012 -0700" }, "message": "Merge \"msm: smem: Add support to read app data from SMEM.\" into msm-3.4" }, { "commit": "f3887ef1d2a2edd9fb605cd2c7326ce39e59e429", "tree": "7c17ceeed087b14152598ce267623a22152a61f5", "parents": [ "7e2e3bee90836224ec61311364351303f2b0e8ff", "56e7f9e2d88a447b10badb0775aca35b7bebc2e4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 08:32:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 08:32:00 2012 -0700" }, "message": "Merge \"ARM: gic: Remove parameters from msm_gic_save\" into msm-3.4" }, { "commit": "7e2e3bee90836224ec61311364351303f2b0e8ff", "tree": "37446cc04908382560c847a91aeb86365c44b66b", "parents": [ "2913b3bd0ccb2fc4c237b99ac7613d9a1b025f7e", "af1709aa11cc2a7ffb113e27991032bdeb2257bf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 08:31:56 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 08:31:56 2012 -0700" }, "message": "Merge \"ARM: gic: Add flag to select 8625 QGIC2 back to back read/write workaround\" into msm-3.4" }, { "commit": "2913b3bd0ccb2fc4c237b99ac7613d9a1b025f7e", "tree": "8702750537ce365cb36aa71b4594a29c285eb706", "parents": [ "ab7319ac2ef49d6a3cddb9488e10d755661e94d3", "cc4ec158cad51839206825777975f021f33344fc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 04:08:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 04:08:07 2012 -0700" }, "message": "Merge \"msm: ocmem: Add support for low power clients\" into msm-3.4" }, { "commit": "ab7319ac2ef49d6a3cddb9488e10d755661e94d3", "tree": "a9ec2b554a783fdfead6cd66aa71ac0cc7b9d60b", "parents": [ "6d97f2a9b5950a22be14b453f0229ba1aa90bb15", "6957fa026060675c197e2aad0762065a6aba7e31" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 04:08:03 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 04:08:03 2012 -0700" }, "message": "Merge \"msm-fb: display: Tearing issue during video playback\" into msm-3.4" }, { "commit": "6d97f2a9b5950a22be14b453f0229ba1aa90bb15", "tree": "22fb186c56d21e0c0811eaea37b3d928899205ff", "parents": [ "c2a030a8c9f5f188efca5f351351e4231fe34eb8", "4bcc4e52d617a8f89390bb632865bb08e8b1f4b0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 04:08:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 04:08:01 2012 -0700" }, "message": "Merge \"msm: Add support for memory dump table\" into msm-3.4" }, { "commit": "c2a030a8c9f5f188efca5f351351e4231fe34eb8", "tree": "737afbd2e1c57f3511dbea28c0e87db2c6535fc0", "parents": [ "092e50b39aa62d3763beb8ae3771cc1918fd28f2", "c8530106f295fef602928df4af13b7ab11ddd51a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 04:07:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 04:07:58 2012 -0700" }, "message": "Merge \"media: dvb: dvb-core: Pass ring-buffers info to kernel-demux\" into msm-3.4" }, { "commit": "092e50b39aa62d3763beb8ae3771cc1918fd28f2", "tree": "5342417a4ba2954bf7854a915a3dd4a133609492", "parents": [ "e2e178fa0c3429b305820932493e365d65342b31", "72977ed7fbf2bfe3ef877f164d7fd306ddfa270a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 02:29:47 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 02:29:47 2012 -0700" }, "message": "Merge \"msm: cache_erp: Add device tree support\" into msm-3.4" }, { "commit": "a42b50244cdb71f93bf842a28b0fc1cecc622c55", "tree": "eccf8e699b563aab729f89a0deecb0a0d444a5c1", "parents": [ "e2e178fa0c3429b305820932493e365d65342b31" ], "author": { "name": "Sunny Kapdi", "email": "sunnyk@codeaurora.org", "time": "Thu Jul 05 22:48:31 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 02:05:06 2012 -0600" }, "message": "bluetooth: Add support for LE conn param\n\nAdded support to let the userspace know about the updated\nLE connection parameters. On receiving successful connection\ncomplete and connection parameters update event from the BT\nController, send a mgmt event to the userspace bluetoothd.\n\nCRs-fixed: 380271\nChange-Id: If8c3d785188e0d4f38c7431d01c016f399137408\nSigned-off-by: Sunny Kapdi \u003csunnyk@codeaurora.org\u003e\n" }, { "commit": "e2e178fa0c3429b305820932493e365d65342b31", "tree": "5bbd474bf3cb91e1ea2543329d7deafba7f087ae", "parents": [ "cf03cfa379415a381df1585189ecc59c694dbbc4", "03cffcb809c23d9962840b8d0b61c3af5c138651" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 00:23:43 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 00:23:43 2012 -0700" }, "message": "Merge \"slimbus: Disconnect source port if source end is removed by client\" into msm-3.4" }, { "commit": "cf03cfa379415a381df1585189ecc59c694dbbc4", "tree": "ffa16c3bac792958846ca609776df91d2f267950", "parents": [ "3f3961e4981bf9a57005b450e1f9dd083073e282", "931d70f936bcb8b1516f137b7261128bf9f8e8dd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 00:23:39 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 00:23:39 2012 -0700" }, "message": "Merge \"mfd: Update mpm to monitor pm8821 gpio line\" into msm-3.4" }, { "commit": "3f3961e4981bf9a57005b450e1f9dd083073e282", "tree": "fbd583b6815c7fd2737049ac634e16dbfbc6a5fa", "parents": [ "8515481553863976b05bfb139a2236c3f29bd2d5", "9554fa3ed7045220b222c35604713f3c66ef6749" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 00:23:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 00:23:32 2012 -0700" }, "message": "Merge \"msm: rpm: remove the sanity check in rpm log\" into msm-3.4" }, { "commit": "8515481553863976b05bfb139a2236c3f29bd2d5", "tree": "83d2710ccfe8c25c2bdcc92892f31db8f0b3a51d", "parents": [ "550f1a359d2dbbeaf67682a8a070c33f52fd282a", "5d260e319eac177e7fc4ba991433f22384742afa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 00:23:27 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 00:23:27 2012 -0700" }, "message": "Merge \"ASoC: WCD9304: Fix register sequence for analog mic recording\" into msm-3.4" }, { "commit": "550f1a359d2dbbeaf67682a8a070c33f52fd282a", "tree": "e807934bc31178acc393a57dd145c3ddd2e1e7f6", "parents": [ "0604e58b4bfd1a31e4a761703da16ac117abb931", "ad3c784b02ec38a86f2f8363141d37666a4b6f66" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 00:23:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 00:23:21 2012 -0700" }, "message": "Merge \"drivers: leds-pm8xxx: enable low power mode for RGB LED\" into msm-3.4" }, { "commit": "0604e58b4bfd1a31e4a761703da16ac117abb931", "tree": "8b3bf179f90b2dbdc0579ea2db413e3273e16db4", "parents": [ "691bccbbfd63e58c059d3de6d5e5d7d547c13922", "b8e8369371e351dcc7708ac63cac26dede3a543f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 00:23:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 00:23:15 2012 -0700" }, "message": "Merge \"mmc: msm_sdcc: Enable AUTO_PROG_DONE for CMD25\" into msm-3.4" }, { "commit": "1ff608a341b87defa586ca4a24d0bd89abfdfbb3", "tree": "1248e822037b521c5c22568d8bfa0fc3c9509470", "parents": [ "0f40bd55ffc47d867c9fb326b4ad5408d064e292" ], "author": { "name": "kyungtae.oh", "email": "kyungtae.oh@lge.com", "time": "Thu Jul 19 14:31:54 2012 +0900" }, "committer": { "name": "kyungtae.oh", "email": "kyungtae.oh@lge.com", "time": "Tue Jul 24 14:58:52 2012 +0900" }, "message": "power: add wirelesscharger(WLC) bq51051b driver\n\nChange-Id: I61c4b9c3d648e8f709ec78708271f807ceed1715\n" }, { "commit": "1ebbfadacd91fcbdb827d6797d4650e0a5cb2cd7", "tree": "bf06b1e382e581568d8ddd2858346ee2bb2c6435", "parents": [ "cc4ec158cad51839206825777975f021f33344fc" ], "author": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Fri Jul 20 19:05:59 2012 -0700" }, "committer": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Mon Jul 23 22:46:48 2012 -0700" }, "message": "msm: ocmem: Initialize the ocmem graphics mPU\n\nAllow the graphics core to access OCMEM regions by initializing\nthe custom mPU until Trustzone support for OCMEM is integrated.\n\nChange-Id: Ie7390ed7a690800f75a663e25d0f53527fec52ae\nSigned-off-by: Naveen Ramaraj \u003cnramaraj@codeaurora.org\u003e\n" }, { "commit": "cc4ec158cad51839206825777975f021f33344fc", "tree": "6f3682f5e67dfecf74851854036cf71686d6b64a", "parents": [ "691bccbbfd63e58c059d3de6d5e5d7d547c13922" ], "author": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Mon May 14 09:55:29 2012 -0700" }, "committer": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Mon Jul 23 22:46:37 2012 -0700" }, "message": "msm: ocmem: Add support for low power clients\n\nAdd support for low power clients to map and unmap OCMEM buffers.\nThese operations trigger RDM transfers using the BR/DM core which\nenables low power clients to migrate segments between main memory and\nOCMEM.\n\nAlso add the required APIs for supporting eviction and\nrestoration of buffers.\n\nChange-Id: I6b641510f8ef27da2b347d13af468a1ed6664c9e\nSigned-off-by: Naveen Ramaraj \u003cnramaraj@codeaurora.org\u003e\n" }, { "commit": "691bccbbfd63e58c059d3de6d5e5d7d547c13922", "tree": "383f4e7c4be68cc103976bbfc1e3e833f174637f", "parents": [ "298c923aef8ea7d6fa236c5319e4dba9bd679d96", "54d3a6d39374c5fe3bd22be970717f57480d6ad8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 21:57:33 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 21:57:33 2012 -0700" }, "message": "Merge \"msm: mpq8064: Dummy read to prevent false interrupt from triggering\" into msm-3.4" }, { "commit": "298c923aef8ea7d6fa236c5319e4dba9bd679d96", "tree": "d4eed038ba4efacddac05c7a098a02ff7f06d4ba", "parents": [ "ab25efc261de6f57531f8928b0f5ef39a7769219", "fed770b228b9317a493c594b4c4bae50f016fdc1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 21:57:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 21:57:28 2012 -0700" }, "message": "Merge \"msm: clock-8974: Correct some audio interface clock structures.\" into msm-3.4" }, { "commit": "ab25efc261de6f57531f8928b0f5ef39a7769219", "tree": "724112b71378e3e9fab13aff68663fa50c10af01", "parents": [ "b2d7f13dcf4ce9d743bf359ef0ed1ab93979a7ca", "97e2e6125a2d5b4cb00b27652e8355f4854d8c94" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 20:07:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 20:07:48 2012 -0700" }, "message": "Merge \"msm: camera: Add some minor code fixes.\" into msm-3.4" }, { "commit": "b2d7f13dcf4ce9d743bf359ef0ed1ab93979a7ca", "tree": "d2cc5b09a2234d3d443c23b514836c9752c89fb9", "parents": [ "33fe201ab6f8cfdac9314516352aa3be552dfcc4", "4bd389429e2a6d78d756edd99814fcfdc0450836" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 20:07:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 20:07:45 2012 -0700" }, "message": "Merge \"ASoC: wcd9310: Clear the status only for active slimbus ports\" into msm-3.4" }, { "commit": "33fe201ab6f8cfdac9314516352aa3be552dfcc4", "tree": "b31dc71285ea96907e43895b2ef03d78db7d066c", "parents": [ "55b63ed5803c2828ea0b6686750b03bdd85b94aa", "a9964a5a8e05c301302e950f678098bfbf6fdecf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 20:07:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 20:07:44 2012 -0700" }, "message": "Merge \"msm: lpm: lpm resources bug fixes\" into msm-3.4" }, { "commit": "55b63ed5803c2828ea0b6686750b03bdd85b94aa", "tree": "991e5c34be2e46190ae2808d9f6fe4df1d1be3d0", "parents": [ "c6eb07c55f9f33501a7ae1d746b45018eecb8468", "d8d0f778333ce4555d995686e462e0577fd07802" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 20:07:40 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 20:07:40 2012 -0700" }, "message": "Merge \"msm: 8974: Add function to reserve memory from device tree\" into msm-3.4" }, { "commit": "c6eb07c55f9f33501a7ae1d746b45018eecb8468", "tree": "d6b27fe9e35a66e1535a5a034b17412258a9fe95", "parents": [ "e0bfbc2d079483783c2f512060dda16e9678b463", "a16a8c26fd3dc6566497c606523866dd6165d09a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 20:07:39 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 20:07:39 2012 -0700" }, "message": "Merge \"spinlock_debug: Fix mismerge\" into msm-3.4" }, { "commit": "e0bfbc2d079483783c2f512060dda16e9678b463", "tree": "d0ad4134c7142f3b56c38b0aa4ecb56534ffa8c4", "parents": [ "e41513e65fa5309c01d1d4e0d918d32c11c0f9e1", "a3453a79d64854d680721eef2de31683337db1ee" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 18:27:56 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 18:27:56 2012 -0700" }, "message": "Merge \"ASOC: msm: Add device tree specific changes in compressed driver\" into msm-3.4" }, { "commit": "e41513e65fa5309c01d1d4e0d918d32c11c0f9e1", "tree": "2bf0625e443b4cc3fff31a1b03634a0bd0364a15", "parents": [ "9ec3572ec512bc04bf0640ef9bbd97d18f78ef61", "196f86e88fac14963de15bcd4413d306d777c1fe" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 18:27:51 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 18:27:51 2012 -0700" }, "message": "Merge changes I308adc69,I2db4f823 into msm-3.4\n\n* changes:\n arm: Support the safe WFE sequence for Krait CPUs\n arm: Convert spinlocks to new inline assembly style\n" }, { "commit": "9ec3572ec512bc04bf0640ef9bbd97d18f78ef61", "tree": "c1b7f84a7cf91e3abb4ba12c77fa4c0d34adf744", "parents": [ "4fbd267dbe0f9779999e52cb4da5c9cb7652d83a", "470d134db676e23982676061971a3a201f32b4a6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 18:27:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 18:27:45 2012 -0700" }, "message": "Merge \"arm: Make the WFE macro unconditional\" into msm-3.4" }, { "commit": "4fbd267dbe0f9779999e52cb4da5c9cb7652d83a", "tree": "c1d2554146b864a875e6ba37071af4e4d7f925cc", "parents": [ "2e781cd43f310a482c7d651a9d38de3459967fba", "ac1671b56125358c31f1cc02277816729cd98156" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 18:27:41 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 18:27:41 2012 -0700" }, "message": "Merge \"ASoc: msm: qdsp6v2: Native drivers to use different pool id.\" into msm-3.4" }, { "commit": "6957fa026060675c197e2aad0762065a6aba7e31", "tree": "b895e3f2f36412ffe62e02353e1376442171dcbb", "parents": [ "2e781cd43f310a482c7d651a9d38de3459967fba" ], "author": { "name": "Siddhartha Agrawal", "email": "agrawals@codeaurora.org", "time": "Wed Jul 11 21:08:50 2012 -0700" }, "committer": { "name": "Siddhartha", "email": "agrawals@codeaurora.org", "time": "Mon Jul 23 17:42:55 2012 -0700" }, "message": "msm-fb: display: Tearing issue during video playback\n\nTearing was observed while playing 1080p H264 videos in\npotrait mode. Enabled blt mode check for MIPI command\nmode panel as well.\n\nCRs-Fixed: 369365\nSigned-off-by: Siddhartha Agrawal \u003cagrawals@codeaurora.org\u003e\nChange-Id: Iac980050e5966db4731240c11e89e1f68118f2b7\n" }, { "commit": "5d260e319eac177e7fc4ba991433f22384742afa", "tree": "07345dfa14a9092fd43db32587fbae693418ec84", "parents": [ "08790720bd5cf0940dddda805eb5b2661e682f96" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Wed Jul 18 16:30:29 2012 -0700" }, "committer": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Mon Jul 23 17:42:13 2012 -0700" }, "message": "ASoC: WCD9304: Fix register sequence for analog mic recording\n\nFound that the register sequence for enabling recording on analog\nmicrophone was updating a wrong register. Fix by correcting the\nregister sequence\n\nCRs-fixed: 378189\nChange-Id: I3598cbc77b279684b28677943ac13f446bc2f78e\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "fed770b228b9317a493c594b4c4bae50f016fdc1", "tree": "c383f10adef50f8fab4938961a6967bc7849d93d", "parents": [ "2e781cd43f310a482c7d651a9d38de3459967fba" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Fri Jul 13 15:10:52 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 18:12:24 2012 -0600" }, "message": "msm: clock-8974: Correct some audio interface clock structures.\n\nThe audio_core_lpaif_codec_spkr_* clocks have incorrect\ninitializing data. Correct these.\n\nChange-Id: Id82b1ba06ab94f8b65aaec6f99d6aa14208f42ee\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "4bd389429e2a6d78d756edd99814fcfdc0450836", "tree": "5923e50c806563475eb62842aa7ca82afeba5439", "parents": [ "2e781cd43f310a482c7d651a9d38de3459967fba" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Tue Jul 17 11:31:31 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 16:06:55 2012 -0600" }, "message": "ASoC: wcd9310: Clear the status only for active slimbus ports\n\nWhen closing the slimbus ports, clear only the slimbus\nports which were active at the time of closing on that\nslimbus interrupt, which will avoid clearing further\ninterrupts for other slimbus ports\n\nChange-Id: I43ce9963c0ecb4b8fb79527b8a9c6b13d7780aad\nCRs-fixed: 380535\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "d526d1ee365797c226d1a0d72769b09425a1fd0d", "tree": "f88d5063807296a5ff100a98c129693f54cebf06", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Tarun Karra", "email": "tkarra@codeaurora.org", "time": "Mon Jun 11 17:51:09 2012 -0700" }, "committer": { "name": "Tarun Karra", "email": "tkarra@codeaurora.org", "time": "Mon Jul 23 14:57:05 2012 -0700" }, "message": "msm: kgsl: Allow non-default timeout values in adreno_idle\n\nIn adreno_idle the default timeout value was always used,\neven if the caller specified something different. The caller\ncan now specify a non default timeout value to be used\nin adreno_idle.\n\nChange-Id: Ibb6bcc094521d4a660d8385b32bf8c6ac68acbd9\nSigned-off-by: Tarun Karra \u003ctkarra@codeaurora.org\u003e\n" }, { "commit": "72977ed7fbf2bfe3ef877f164d7fd306ddfa270a", "tree": "b0221b49728c210320f4108749d31e3b56b42cfe", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Mon Jul 02 12:36:23 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Mon Jul 23 14:23:44 2012 -0700" }, "message": "msm: cache_erp: Add device tree support\n\nAdd device tree bindings and driver support for the cache\nerror reporting devices on 8974. Remove leftover\nopportunistic debug info from the L1 error handler, since\nwe can no longer get away with this on all targets.\n\nChange-Id: Iac88915a6b40a40ec3157027048f4daf6369dc42\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "a3453a79d64854d680721eef2de31683337db1ee", "tree": "b2997981d35b79c33d7cf1e3e4034d3de7ae2443", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Harmandeep Singh", "email": "hsingh@codeaurora.org", "time": "Tue Jul 03 12:31:09 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 15:02:46 2012 -0600" }, "message": "ASOC: msm: Add device tree specific changes in compressed driver\n\n- Add a front end DAI link for compressed audio driver.\n- Add device tree specific changes to sound soc compressed\n drivers which will help the detection of sound card.\n\nChange-Id: I4a8076df8c82cd4e444fc0d68e8f7a228bd1dc02\nSigned-off-by: Harmandeep Singh \u003chsingh@codeaurora.org\u003e\n" }, { "commit": "2e781cd43f310a482c7d651a9d38de3459967fba", "tree": "3c1b28237cdd77c290813754a5979fe0b6c04118", "parents": [ "7b35f76711020128d9cd67570a8e60e90fd9a19e", "93b8513f9d4e89396a49dcd84832b8ac2ac58c76" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 13:56:05 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 13:56:05 2012 -0700" }, "message": "Merge changes I42fa5e71,If93efea7,I505eef8f into msm-3.4\n\n* changes:\n msm: Always compile acpuclock-krait when CONFIG_ARCH_MSM_KRAIT is set\n msm: pm-8x60: Remove msm_pm_wait_cpu_shutdown()/verify_cpu_pc() APIs\n msm: acpuclock-krait: Discard unused SoC-specific data by using __initdata\n" }, { "commit": "7b35f76711020128d9cd67570a8e60e90fd9a19e", "tree": "d03dd3856a3adba4df630dc9792bcebf6e746f1c", "parents": [ "535a3469c900d710167855b12447820972afdac3", "51eaeb2e08a709139e1c2177b59f4bfab71c8c7d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 13:56:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 13:56:04 2012 -0700" }, "message": "Merge changes Ic8c9bdcf,Icc62962d,I5cc87544 into msm-3.4\n\n* changes:\n msm: acpuclock-8974: Consolidate CPU and L2 HFPLL data\n msm: acpuclock-krait: Make ACPU levels reference L2 levels by index\n msm: acpuclock-8960: Migrate 8960 support to use acpuclock-krait\n" }, { "commit": "535a3469c900d710167855b12447820972afdac3", "tree": "1169f51c87c7e0464207641ea581d7e1c50a0fe6", "parents": [ "ca9b8f18588a22d6931a8baeb6b471ba5bdfbdfb", "f5cc389561099febc2b4e06291426c7f59638bc6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 13:55:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 13:55:58 2012 -0700" }, "message": "Merge \"msm: acpuclock-8064: Move 8064 support to use acpuclock-krait\" into msm-3.4" }, { "commit": "ca9b8f18588a22d6931a8baeb6b471ba5bdfbdfb", "tree": "c909f077f356ce003c0a82ff3fe03bb419b22f43", "parents": [ "316e1eef77061f7a3d463a46bb63ebf178e73212", "d1fd56643015ed35d853a42f5a04055e104fdbb9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 13:55:51 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 13:55:51 2012 -0700" }, "message": "Merge \"msm: acpuclock-8960: Apply alternate 8064 workaround for Krait errata\" into msm-3.4" }, { "commit": "316e1eef77061f7a3d463a46bb63ebf178e73212", "tree": "fbb84b2984285995c5ed6ab48299157924b72ebb", "parents": [ "777c3ceb0e2da698a2e2e4e72f797017c51de8a4", "cb79866da3e7dade93b8d2eb4b8068703ce0dfb8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 13:55:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 13:55:48 2012 -0700" }, "message": "Merge \"msm: audio: Use adsp as a string param for pil_get function for 8974\" into msm-3.4" }, { "commit": "ad3c784b02ec38a86f2f8363141d37666a4b6f66", "tree": "074505705e392387b38fe5569f2f3ea620e9f3dc", "parents": [ "08790720bd5cf0940dddda805eb5b2661e682f96" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Fri Jul 20 14:51:27 2012 -0700" }, "committer": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Mon Jul 23 13:40:10 2012 -0700" }, "message": "drivers: leds-pm8xxx: enable low power mode for RGB LED\n\nDisable RGB module when the LED is turned off and enable the\nmodule when the LED is on.\n\nCRs-fixed: 381623\nChange-Id: I0861c6a38fff19c9499d169deaa02d05696bd148\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "d8d0f778333ce4555d995686e462e0577fd07802", "tree": "191e60f1cf2fd53a1b80ad8de1f00d6b74296ba9", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Tue Jul 10 10:27:06 2012 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Jul 23 13:25:24 2012 -0700" }, "message": "msm: 8974: Add function to reserve memory from device tree\n\nMemory reservations for memory pools or using memblock remove\nmust happen early at bootup. Add a function at early boot to\nwalk the flattened device tree and extract memory reservation\ninformation from appropriate bindings in device tree. To ensure\nthat the memory is only reserved when a driver is enabled,\ndrivers must put EXPORT_COMPAT(\u003ccompat string\u003e) in the driver\nas well as adding the binding to the device tree. More\ndocumentation is available in\nDocumentation/devicetree/bindings/arm/msm/memory-reserve.txt\n\nChange-Id: I28fa71d7a30cea9af5447acb5d2dde562fa0f6de\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "0f40bd55ffc47d867c9fb326b4ad5408d064e292", "tree": "5b07929114c92636f2666a7c247a3b1b4ed57523", "parents": [ "f128727728206483425c303064d2601a4dee1851", "040e70a33aa54734a6e6152f50f7a909896d8928" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Mon Jul 23 13:00:23 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Mon Jul 23 13:00:23 2012 -0700" }, "message": "Merge \"msm: fix typo for sdcc packed write\" into android-msm-mako-3.4-wip" }, { "commit": "777c3ceb0e2da698a2e2e4e72f797017c51de8a4", "tree": "d0cc767e21826f86c842755d5ad98f195b99741c", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Tue Jul 03 20:02:55 2012 -0700" }, "committer": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Mon Jul 23 11:59:38 2012 -0700" }, "message": "msm: clock-8974: Add block reset support for the USB cores\n\nThe USB 3.0, USBHS and USB HSIC cores require asynchronous block\nreset support for correct operation in certain scenarios. Support\nthese resets by adding BCR_REG for the relevant clocks.\n\nChange-Id: If4f47201c485ea2060d4b795e767a1c69d34d22e\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "f5a8e3880c0b00696914067f9edb69fd31496940", "tree": "1a83e7359ac7fa7a2913387e2466b2f7d8635e9c", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Siddhartha Agrawal", "email": "agrawals@codeaurora.org", "time": "Wed Jul 18 16:33:18 2012 -0700" }, "committer": { "name": "Siddhartha", "email": "agrawals@codeaurora.org", "time": "Mon Jul 23 11:53:12 2012 -0700" }, "message": "msm_fb: display: Brightness change observed when switching HDMI on\n\nWhen switching HDMI on, 3D display gets turned on. Correctly setting\nup the 3D GPIO(DISP_3D_EN_N) to fix the problem.\n\nCRs-Fixed: 360983\nSigned-off-by: Siddhartha Agrawal \u003cagrawals@codeaurora.org\u003e\nChange-Id: I898b30ce399a8de481e51676954b57ca5f09797a\n" }, { "commit": "54d3a6d39374c5fe3bd22be970717f57480d6ad8", "tree": "567e1f8397cc39d02b75d297033f72bbf1703678", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Tue Jul 10 14:05:35 2012 -0400" }, "committer": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Mon Jul 23 14:31:47 2012 -0400" }, "message": "msm: mpq8064: Dummy read to prevent false interrupt from triggering\n\nThe VBIF is capable of triggering a false bus error the first time\nit performs a read. This fix creates a dummy read event that\nhappens every time that the VCAP is powered on that will ignore\nthe false positive VBIF interrupt error, so that during normal\noperation the error can be properly identified.\n\nChange-Id: Ie56e60faf2067fab7a05a0f16c2d840408c35035\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "b8e8369371e351dcc7708ac63cac26dede3a543f", "tree": "b2bf83df18f901c816be9e95fa99fb1a260be479", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Tue Jul 17 15:08:13 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 12:30:29 2012 -0600" }, "message": "mmc: msm_sdcc: Enable AUTO_PROG_DONE for CMD25\n\nWith commit (d5d59dc) setting AUTO_PROG_DONE bit for Multi\nblock write command (CMD25) is broken. Fix this by setting\nwait_for_auto_prog_done flag for CMD25 preceded with CMD23.\n\nChange-Id: Ic81550b199162b657ad4ef5de47ec0c2d4de25c8\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "040e70a33aa54734a6e6152f50f7a909896d8928", "tree": "b37cada9aa32be40f45c8d09b74ebdffd0fef385", "parents": [ "ab43049a4b805d8d11c2d01017e4f3e1c25e4061" ], "author": { "name": "Jaeseong GIM", "email": "jaeseong.gim@lge.com", "time": "Sun Jul 22 01:58:09 2012 -0700" }, "committer": { "name": "Jaeseong GIM", "email": "jaeseong.gim@lge.com", "time": "Mon Jul 23 10:44:20 2012 -0700" }, "message": "msm: fix typo for sdcc packed write\n\nChange-Id: Ia916003cce226c46ab5714b9bde449944da77b53\n" }, { "commit": "9554fa3ed7045220b222c35604713f3c66ef6749", "tree": "019fb08d7ba0c77176d2dd000dfe5c4df7850c3e", "parents": [ "4d70252374fdad219ce7dbf78b474bd57f8ff98c" ], "author": { "name": "Anji Jonnala", "email": "anjir@codeaurora.org", "time": "Fri Jul 20 03:33:53 2012 +0530" }, "committer": { "name": "Anji Jonnala", "email": "anjir@codeaurora.org", "time": "Mon Jul 23 22:57:55 2012 +0530" }, "message": "msm: rpm: remove the sanity check in rpm log\n\nOn 8960 it is observed that head and tail of rpm\ncircular buffer is not updated properly which is preventing\nreading the RPM log through adb.\n\nCRs-fixed: 365071\nChange-Id: If24b7fb29fce14dccc24dbcdbe3513d22d94a298\nSigned-off-by: Anji Jonnala \u003canjir@codeaurora.org\u003e\n" }, { "commit": "97e2e6125a2d5b4cb00b27652e8355f4854d8c94", "tree": "1ec54445fbf519852c9113a98ae43d5c7c3c3cb7", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Thu Jul 12 13:51:17 2012 -0700" }, "committer": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Mon Jul 23 10:11:31 2012 -0700" }, "message": "msm: camera: Add some minor code fixes.\n\nAdd couple of valid ptr checks and zero out\nvariables after allocation.\n\nChange-Id: Ib0e80eab9ac41cec192d1c4a04f8aeafd77729a3\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "93b8513f9d4e89396a49dcd84832b8ac2ac58c76", "tree": "688d9e5fbcb42d4a8b5ead1da8d64e7bf1ec491b", "parents": [ "5375aa701010d512f91e330f3db6dd43408f4bd6" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Jul 12 18:10:25 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 23 09:49:18 2012 -0700" }, "message": "msm: Always compile acpuclock-krait when CONFIG_ARCH_MSM_KRAIT is set\n\nRather than enabling compilation of acpuclock-krait on every Krait\ntarget individually, use the Krait Kconfig.\n\nChange-Id: I42fa5e7194bc96d181dcc3d3247022a53c9f90f8\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "5375aa701010d512f91e330f3db6dd43408f4bd6", "tree": "c5e35a980686dde24b460fb94789a2e970dac14a", "parents": [ "1f3762d966a5818bc601707e28f3a1f79359b583" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 02 19:59:51 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 23 09:49:18 2012 -0700" }, "message": "msm: pm-8x60: Remove msm_pm_wait_cpu_shutdown()/verify_cpu_pc() APIs\n\nThe APIs are currently unused. They were added for the benefit of\nthe acpuclock-8960 driver, which needed them to ensure that CPUs\nwere really power-collapsed before their clocks were disabled.\n\nThe current acpuclock-krait driver solves this problem a different\nway, by taking advantage of hardware features that were not\navailable in early (unreleased) versions of the Krait cores. Now,\ninstead of disabling the CPUs\u0027 clocks, a low-frequency always-on\nclock source is selected and hardware clock gating is employed to\nsave power. With this, it is no longer necessary to wait for the\nSPM to confirm the CPU has power-collapsed before acpuclock\u0027s\nCPU_DEAD callback executed.\n\nChange-Id: If93efea7c0bd4bb2943e1a1782217943eacf31a0\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "51eaeb2e08a709139e1c2177b59f4bfab71c8c7d", "tree": "64f7263816b5a2034e62f54d10167ffda708bbd5", "parents": [ "600ea509597692fd28069da9437b2dd9417194d1" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Jul 03 14:11:18 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 23 09:49:17 2012 -0700" }, "message": "msm: acpuclock-8974: Consolidate CPU and L2 HFPLL data\n\nThe HFPLL data for the CPU PLLs and the L2 PLL are the same with the\nexception of the voltage data specified. The voltage data, however,\nis only relevant for the L2 PLLs (since the CPU HFPLL voltage\nrequirements are captured as part of the CPU frequency/voltage table).\nBecause of this the tables can be combined.\n\nChange-Id: Ic8c9bdcf3c3c32a62906031fe5ffbc60a8b824f4\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "f5cc389561099febc2b4e06291426c7f59638bc6", "tree": "857a3dc53d5d3717c8c30f0364b4cf95b285e813", "parents": [ "d1fd56643015ed35d853a42f5a04055e104fdbb9" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Jun 07 19:47:02 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 23 09:49:17 2012 -0700" }, "message": "msm: acpuclock-8064: Move 8064 support to use acpuclock-krait\n\nMigrate 8064 support from acpuclock-8960 to the newer, optimized\nacpuclock-krait driver which is shared among multiple SoCs while\nkeeping 8064 data in its own file.\n\nChange-Id: I0fc5e5f8ade2976b8e1727c9c560f640450f8837\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "d1fd56643015ed35d853a42f5a04055e104fdbb9", "tree": "f216f7bbcdba3c5bf91b21b188eeaebb9b6168a0", "parents": [ "f546a88189f2c3a28d47c2067144f4f3af1bce7a" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Jun 08 13:49:43 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 23 09:49:17 2012 -0700" }, "message": "msm: acpuclock-8960: Apply alternate 8064 workaround for Krait errata\n\n8064v1.x hardware has a known issue where the CPU\u0027s primary and secondary\nclock source muxes reset to their default states when the L2 cache is\npower-collapsed. To work around this, software sets these muxes to their\ndefault positions (QSB selected) before L2 power-collapse so that software\nstate remains in sync with the hardware.\n\nReplace this workaround with an improved one that incurs less of a latency\npenalty in the hotplug path (since selecting the slow QSB source may slow\ndown hotplug). The improved workaround targets the root of the problem,\nwhich is that the L2CPUVRF8 CP15 register becomes corrupt when L2CPMR or\nL2CPUCPMR are written to. It is this corruption that results in the\nchange in L2 power-collapse behaviour and the muxes getting reset.\n\nImplement the improved workaround, which saves and restores L2CPUVRF8\u0027s\nvalue around L2CPMR and L2CPUCPMR writes. Although the register is still\ncorrupt for a short period of time before the register is restored, this\nis of no consequence since L2 power-collapse cannot happen at that time.\n\nChange-Id: I3ac13f286ac903d5f974bf735ebf287d9413216b\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "1f3762d966a5818bc601707e28f3a1f79359b583", "tree": "5f05be07a51b26ed08e16f372891f674fdfc7024", "parents": [ "51eaeb2e08a709139e1c2177b59f4bfab71c8c7d" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Jun 08 19:08:48 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 23 09:49:17 2012 -0700" }, "message": "msm: acpuclock-krait: Discard unused SoC-specific data by using __initdata\n\nRefactor the initialization code so that datastructures that must be\nkept are kmemduped and the rest are discarded after the kernel has\nbooted with the help of __initdata markings.\n\nFor a typically-compiled all-in-one kernel containing support for\nmsm8960, apq8064, msm8627 and msm8930, this allows 11.5K to be moved\nfrom the .data to the .init.data section, with less than 10% of that\nretained in dynamically-allocated memory (the exact amount varies\ndepending on the device the kernel is booted on).\n\nChange-Id: I505eef8f10dc0e44bab15954b797252c3c408e50\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "600ea509597692fd28069da9437b2dd9417194d1", "tree": "9b3ad165ac40b8c9babfab8ed519b52b9735a176", "parents": [ "6115d78c9039a337fa33607faed7a38ce7692cb4" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Jun 08 18:49:53 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 23 09:49:17 2012 -0700" }, "message": "msm: acpuclock-krait: Make ACPU levels reference L2 levels by index\n\nBy referencing L2 frequency table rows by indexes rather than pointers,\nwe allow for future enhancements which will allocate the L2 frequency\ntable at runtime.\n\nChange-Id: Icc62962d5d7b27dbf39008bc6eff83c4ee8951c4\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "6115d78c9039a337fa33607faed7a38ce7692cb4", "tree": "1f12f237fc567bbf0a6667035669ecef4340daf2", "parents": [ "f5cc389561099febc2b4e06291426c7f59638bc6" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Jun 07 20:13:51 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 23 09:49:17 2012 -0700" }, "message": "msm: acpuclock-8960: Migrate 8960 support to use acpuclock-krait\n\nLeverage the optimized code of the new acpuclock-krait driver for\n8960. The newer driver is simpler and more efficient than the existing\nacpuclock-8960 code, but drops support for Krait v1 processors (which\nwere not commercialized anyway).\n\nChange-Id: I5cc875446f02a9f169c9997b716e0464a3a20ee1\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "f128727728206483425c303064d2601a4dee1851", "tree": "c3cea3cc3a35631b4fd18a748c61917c1af731d7", "parents": [ "ab43049a4b805d8d11c2d01017e4f3e1c25e4061" ], "author": { "name": "Ajay Dudani", "email": "adudani@codeaurora.org", "time": "Thu Jul 19 16:50:27 2012 -0700" }, "committer": { "name": "Ajay Dudani", "email": "adudani@codeaurora.org", "time": "Mon Jul 23 09:19:55 2012 -0700" }, "message": "Merge prima driver releases 3.2.0.1 and 3.2.0.2 from codeaurora.org\n\ngit clone git://codeaurora.org/external/wlan/prima.git\n\td13512 prima: WLAN Driver Release 3.2.0.1\n\t43971f5 prima: WLAN Driver Release 3.2.0.2\n\nprima: WLAN Driver Release 3.2.0.1\n\nIntegrate the following CLs from Perforce:\n\n635258: Integrate the latest Riva API\n\n635360: Cleaning up WDI_SendMsg for WDA requests with req callbacks\n1. For WDI requests which have registered a request callback, inform\nthe WDA caller of the same via setting the return value (wdiStatus) to\nWDI_STATUS_PENDING. This makes sure that WDA doesnt end up repeating\nthe functonality in the req callback for the WDI_STATUS_E_FAILURE case\n2. General cleanup/restructuring of WDI_SendMsg.\n(CR 356091)\n\n635425: Add support for multicast MAC address list\nProvision to configure multicast MAC address list \"gMCAddrListEnable\"\nflag and support for Multicast MAC address List. Currently Multicast\nMAC address List is not supported. Nowit is supported in Riva and Host\nchanges are verified. In addition to this, one ini flag\n\"gMCAddrListEnable\" is introduced to enable this support.\n # to enable Multicast MAC address list\n # Flags to enable filter Mcast MAC address list separately\n # gMCAddrListEnable\u003d1 to enable the support\n # gMCAddrListEnable\u003d0 to disable the support\n gMCAddrListEnable\u003d1\nDefault value 0 if not configured in ini file. (CR 371401)\n\n635520: Fix a possible NULL pointer dereference in SME \u0027get statistics\u0027\nFix a possible NULL pointer dereference while SME processes a \u0027get\nstatistics\u0027 de-register request. (CR 368659)\n\n636116: Support multicast MAC address list\n\n636138 \u0026 636161: Remove hard tabs\n\n636159: Avoid duplicate entries in gLimMgmtFrameRegistratinQueue\n__limProcessSmeRegisterMgmtFrameReq is adding entry even there is an\nentry for requested mgmt frame already exists. This is creating\nproblem when wlan_hdd_request_remain_on_channel function get called\nback to back. Fix- First checking whether the entry for requested\nmgmt frame exists in the list; if exists then deleting the entry and\nadding new entry to make sure that there wont be no duplicate entries\nin the list.\n\n636356: Avoid unwanted reset of country code after disassoc/assoc failure\nAfter dis-association or association failure, reset the country code\nonly if 11d is disabled and current operating country code and default\ncountry codes are different. If we reset the country code, driver is\nflushing the scan results and which is triggering full scan. Full scan\nis taking 3-4 sec and this delay is causing connection issues in\nroaming.\n\n636724: Fix for Prefetch Abort in Vos MC Thread\nFix to not invoke WDI callback function if it is NULL (CR 370598)\n\nprima: WLAN Driver Release 3.2.0.2\n\nIntegrate the following CLs from Perforce:\n\n636735: Insure PMK candidate notify event only sent up to supplicant for RSN\nInsure that PMK candidate notify even only sent up to supplicant for\nRSN associations (CR 362782)\n\n636761,\n636770,\n636789: Feature for supporting roaming to an AP with better RSSI\nThis feature takes care of the station to roam to a new AP only if the\nroamable/new AP has a better RSSI than current AP. A new ini item has\nbeen added named RoamRssiDiff using which we can configure how better\nin terms of Rssi, the new AP that we want to roam should be. On\nproviding a value of Zero, the feature is disabled and the check for\nan AP with better RSSI does not happen while roaming. (CR 366355)\n\n636834: Set rssi filter period to FT value\nif CCX is disable and LFR is enabled, rssi filter period was set to 20\n(default value) because of which RSSI monitoring was not effective,\nchanges added to set rssi filter period to FT rssi value (5) even for\nLFR enabled case also. (CR 372303)\n\n636843: isFastRoamingEnabled passed during reassoc (CR 372303)\n\n636970: Implemented getwlandbg for SoftAP\nSoftAP does not have an ioctl to print the log levels and log\ninfo. Implemented getwlandbg for SoftAP. (CR 374467)\n\n636989 \u0026 636992: Remove hard tabs and DOS line endings\n\n637100: Fix of WDA Stop timeout kernel panic issue.\nWDA stop timeout should never happen. Increasing WDA stop timeout\nafter considering 1 pending request and cleaning up WDI pending queues\nonce driver unload is trigerred. (CR 367261)\n\n637246: Fixed WLAN_BAPReset() to avoid sending Disassoc on STA interface.\nDue to some reason(Seen just after driver load and whenever\nhdd_netdev_notifier_call get called with netdevice state\nNETDEV_GOING_DOWN where we call WLANBAP_DeregisterFromHCI())\nWLAN_BAPReset was getting called through BSL_Write -\u003e bslWriteFinish.\nEven If the BT-AMP session is not opened(in this case\nbtampHandle-\u003esessionId will be zero(default value) and if\nWLAN_BAPReset is called, BAP was issueing sme_RoamDisconnect with\nsessionId 0 which is station interface which results in Disassoc of\nSTA with AP. Fixed the issue by checking BT-AMP session is opened or\nnot. (btampContext-\u003eisBapSessionOpen). If its opened then only call\nsme_RoamDisconnect.\n\n637340: SAP does not beacon on Country code to which STA is associated\n(CR 368474)\n\n637497: completed tx statistic reporting functionality\n(CR 370923)\n\n637687: Support for MC/BC \u0026 hostARPOffload with ini to work instead of ioctl\nFixes MC frames are still passed to host driver although\nMcastBcastFilter\u003d1, hostArpOffload\u003d0 (CR 363707)\n\n637850: Fix for SAP Auto Channel Selection feature\nFor SAP auto channel selection, WLAN host driver do scan to find less\nnoise channel. While performaing scan do not check for Active session\nin CSR module and change CSR roam state to eCSR_ROAMING_STATE_SCANNING\nstate for scan command irrespective of session is active or not. (CR\n375829)\n\n638022: Fix for CCX-STA to connect to CCKM-RSN AP\nbecause of the incorrect if-else-if authentication type overwritten to\n255 (CR 376930)\n\n638142-638147: Fix compilation warnings caused by GCC -Wenum-compare\nRecent versions of the GCC compiler include an \"enum-compare\" warning\nwhich will emit a warning when an enum of one type is compared with an\nenum of a different type. The compiler has found occurrences of this\nissue in the WLAN code. Fix those issues such that enum comparisons\nare restricted to enums of the same enumerated type.\n\n638253: Implemented getAutoChannel ioctl for SoftAP\nSoftAP does not have an ioctl to get auto channel. Implemented\ngetAutoChannel for SoftAP and fixed getchannel ioctl for softap (CR\n369147)\n\n638267: Fix GCC 4.6 compile failure in WDI due to inlining failure\nWDI_GET_PAL_CTX() was defined to be an inline function, but the\nfunction body was not available to the compilation units that refer to\nit. Other versions of the compiler have silently ignored this, but\nGCC-4.6 is emitting an error \"sorry, unimplemented: inlining failed in\ncall to \u0027WDI_GET_PAL_CTX\u0027: function body not available\". So we remove\nthe unnecessary \"inline\" directive from the definition of\nWDI_GET_PAL_CTX().\n\n638291: Fix WLAN suspended flag\nIf WLAN driver suspend fails becuase of a TX, RX or MC thread suspend\ntimeout, the suspended flag is not reset. So set the suspended flag\nonly after all three threads are suspended successfully. (CR 375230)\n\n638703: Disabling AMP flag\nDisabling AMP flag from config file, so that we don\u0027t register with\nHCI any more as BT AMP is not PORed (CR 375826)\n" }, { "commit": "f546a88189f2c3a28d47c2067144f4f3af1bce7a", "tree": "4a7fa3a3bf759c23c0fbe7c2337238f4f520e703", "parents": [ "7e55a83e737a5a0abc2e7474746029347c5e05f7", "1f02d953a21046b706c842e3ade702d25db92264" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 08:09:49 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 08:09:49 2012 -0700" }, "message": "Merge \"msm: Add configuration required to use GSBI8 into UARTDM Mode\" into msm-3.4" }, { "commit": "7e55a83e737a5a0abc2e7474746029347c5e05f7", "tree": "f757db5062d727821623d55c2e485f83617c8927", "parents": [ "d8fddf095850a56093bf995b2429fbf9ff40560b", "62d4a8cb1a5a1a98b3a70988de9ff9e2c1368be6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 08:09:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 08:09:48 2012 -0700" }, "message": "Merge \"msm: HDMI: Re-initialize the scan details for every HPD\" into msm-3.4" }, { "commit": "56e7f9e2d88a447b10badb0775aca35b7bebc2e4", "tree": "f9e2c65252810d4861680f534fe478e4e81b1148", "parents": [ "af1709aa11cc2a7ffb113e27991032bdeb2257bf" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Fri Jun 08 15:01:44 2012 +0530" }, "committer": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Mon Jul 23 19:41:05 2012 +0530" }, "message": "ARM: gic: Remove parameters from msm_gic_save\n\nRemove modem_wake and from_idle parameters from msm_gic_save\nAPI since they are not used at all.\n\nChange-Id: Icd1a83aea6b0eb988c19ccdbaf65b1f5be9e8ac2\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "af1709aa11cc2a7ffb113e27991032bdeb2257bf", "tree": "31ab289fe6664c5c4d1db781780b28adb77cebd8", "parents": [ "79c65b5b5af46a8e0d728807bddb7eec4e5aef47" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Wed Jun 06 19:00:25 2012 +0530" }, "committer": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Mon Jul 23 19:39:25 2012 +0530" }, "message": "ARM: gic: Add flag to select 8625 QGIC2 back to back read/write workaround\n\nMSM8625 v1.0 needs the s/w workaround for hready pin access problem\nin QGIC2. The workaround is add the lock around every QGIC2 register\u0027s\nread and write operation to avoid reading the incorrect value from the\nQGIC2 registers when back to back read happens on another CPU.\n\nChange-Id: If980c03d2c57b0b9c560b5a746db0535584841d9\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "d8fddf095850a56093bf995b2429fbf9ff40560b", "tree": "31dfb5a2360b41a3790dffe6c85249ccc0a7c04c", "parents": [ "5c8f65ae531d578656ca9b75d19a8d9cd6a854c1", "30befc28305440f30770a6545839fe4b55ee2207" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 06:39:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 06:39:52 2012 -0700" }, "message": "Merge \"msm_fb: display: suspend-resume on HDMI\" into msm-3.4" }, { "commit": "5c8f65ae531d578656ca9b75d19a8d9cd6a854c1", "tree": "0f83f399d301166d02cae6a35a403d9a496eec64", "parents": [ "75c41378a07efc4454c2277089cc966f4e00685c", "384591539d0f0642e336650e7c8879bdb3f048bb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 06:39:51 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 06:39:51 2012 -0700" }, "message": "Merge \"arm/dt: msmcopper: Add TLMM/GPIO support for SDC slots\" into msm-3.4" }, { "commit": "75c41378a07efc4454c2277089cc966f4e00685c", "tree": "92635f268a0bbf37c70e1992c6b4beb7d0cffc7a", "parents": [ "9f52116da4d90a659a686a8ffb6fd4f4466d3dfe", "df67a26bb4e4eb274ef367ad67b10d1c845ef7f9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 06:39:50 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 06:39:50 2012 -0700" }, "message": "Merge \"msm_fb: display: Remove unnecessary dtv_pipe checks\" into msm-3.4" }, { "commit": "9f52116da4d90a659a686a8ffb6fd4f4466d3dfe", "tree": "4c8ab2ba386e0d8aa0a75374528da9224509da25", "parents": [ "79c65b5b5af46a8e0d728807bddb7eec4e5aef47", "dcc2e22ae1f12179fdf0786717944647fd607234" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 06:39:49 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 23 06:39:49 2012 -0700" }, "message": "Merge \"msm: board-8930: Configure GPU turbo clock for msm8930 HW varients.\" into msm-3.4" }, { "commit": "62d4a8cb1a5a1a98b3a70988de9ff9e2c1368be6", "tree": "7c3c38b77b13f946cfdd55db19497756c921d7eb", "parents": [ "79c65b5b5af46a8e0d728807bddb7eec4e5aef47" ], "author": { "name": "Jeevan Shriram", "email": "jshriram@codeaurora.org", "time": "Tue Jul 17 11:44:25 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 05:34:51 2012 -0600" }, "message": "msm: HDMI: Re-initialize the scan details for every HPD\n\nAfter disconnecting the phone from TV which doesn\u0027t support\nunderscan, and connected to TV which support underscan,\nunderscan is not working due to non re-initialization of\nscan variables. Re-initialize the underscan variables for\nevery HDP events.\n\nCRs-Fixed: 375862\nChange-Id: I22b7b8785ec93f9cf226e9b646a851ffb3ceff62\nSigned-off-by: Jeevan Shriram \u003cjshriram@codeaurora.org\u003e\n" }, { "commit": "1f02d953a21046b706c842e3ade702d25db92264", "tree": "97f16b2a557c84472002726ed2ba8adaaac48e0c", "parents": [ "79c65b5b5af46a8e0d728807bddb7eec4e5aef47" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Wed Jul 04 19:11:20 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 23 03:53:13 2012 -0600" }, "message": "msm: Add configuration required to use GSBI8 into UARTDM Mode\n\nAdd GSBI8 device and its related interfaces with their configuration\ni.e. clock, ADM, GPIO. GSBI8 UARTDM interface can be used for external\nBluetooth SoC.\n\nCRs-Fixed: 375285\nChange-Id: I15819862072c92d8ff6f397fdf081f1b619ec235\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "c8530106f295fef602928df4af13b7ab11ddd51a", "tree": "f671db2836c1bde24709df0d15566d1fcb4972f4", "parents": [ "fd37d4fc7c3f86e9bf7e5c41eeea5aec95e007fd" ], "author": { "name": "Hamad Kadmany", "email": "hkadmany@codeaurora.org", "time": "Mon Jul 23 11:43:09 2012 +0300" }, "committer": { "name": "Hamad Kadmany", "email": "hkadmany@codeaurora.org", "time": "Mon Jul 23 11:43:09 2012 +0300" }, "message": "media: dvb: dvb-core: Pass ring-buffers info to kernel-demux\n\nIn order to support mapping of the ring-buffers of\ndemux-device directly to HW output, kernel-demux needs\nto get the information of the ring-buffers. In addition,\nwhen these buffers are mapped to HW output, kernel-demux\nneeds to be notified when data is read from the buffers\nso that the respective HW FIFO can be updated accordingly.\n\nChange-Id: I29e2e89476dd343dbebb440c6feb955a76fd0bd1\nSigned-off-by: Hamad Kadmany \u003chkadmany@codeaurora.org\u003e\n" } ], "next": "384591539d0f0642e336650e7c8879bdb3f048bb" }