)]}' { "log": [ { "commit": "1d5ea0fe7cff5f4f871ca7b3472baaa1154b8700", "tree": "c353fa815703dfd4de64c26ee2ab10f6bb8af909", "parents": [ "d17ee76eb410253365557866f1cb872f0a87f6e7" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Tue Jun 28 17:31:02 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:27 2011 -0700" }, "message": "msm: 8960: Enable Multi-tiering support on 8960\n\nThis patch enables multi-tiering support on 8960.\n\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "d17ee76eb410253365557866f1cb872f0a87f6e7", "tree": "1b3e8dc1d0335607e2ba19adc2adc0518355796a", "parents": [ "4923db20b5e49ed096264e0d6b49996dc840bf06" ], "author": { "name": "Jeff Ohlstein", "email": "johlstei@codeaurora.org", "time": "Mon Sep 26 19:44:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:27 2011 -0700" }, "message": "msm: timer: make first_boot flag per-cpu\n\nPreviously we would only setup the local timer properly on one cpu,\nsince we relied on a one-use flag for this purpose, and it was not\nper-cpu. Make it per-cpu so each cpu initializes its timer.\n\nSigned-off-by: Jeff Ohlstein \u003cjohlstei@codeaurora.org\u003e\n" }, { "commit": "4923db20b5e49ed096264e0d6b49996dc840bf06", "tree": "8ba57f29eab1693eaf43eef825f4352a7c37f3c8", "parents": [ "74b6880e292e5236aa2700f85815216f5264d191" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Thu Sep 15 09:28:15 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:27 2011 -0700" }, "message": "msm: board-9615: Add support for cpuidle and pm\n\nAdd device declarations for cpuidle and pm to the 9615 board file.\n\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "74b6880e292e5236aa2700f85815216f5264d191", "tree": "9a3add1e80814bde6703c48f2644a578a31c3679", "parents": [ "e2fc3f661343d5fb55edcc3089e0ed5763220756" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Thu Sep 15 09:27:03 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:27 2011 -0700" }, "message": "msm: msm9615_defconfig: Enable CONFIG_PM and CONFIG_CPU_IDLE\n\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "e2fc3f661343d5fb55edcc3089e0ed5763220756", "tree": "43ced77f29f5bc9f02420e4dcf1b4a6979a98dbf", "parents": [ "f6d94f2458bdbb02a5cd49a7efa270768fb0bddf" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Thu Sep 15 09:22:42 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:27 2011 -0700" }, "message": "msm: Makefile: Compile pm-8x60.c and cpuidle for 9x15\n\nCheck to compile SCM related code only when CONFIG_MSM_SCM is defined.\n\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "c71d8ff4b429528b645b6663575345adcfc76da5", "tree": "62888ec67317607eb27d98a52e2f0544978b87ed", "parents": [ "d7a5acf25cc0c501df93964975fbca6031c82acc" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Mon Sep 26 13:17:58 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:27 2011 -0700" }, "message": "arm: cache-l2x0: Restore the data latency ctrl register after suspend.\n\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "d7a5acf25cc0c501df93964975fbca6031c82acc", "tree": "2cb60311ca4f1832292ce9f445f21060925fc306", "parents": [ "6dcc6704f31632ade9d5a849f9caf8778df7815b" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Oct 05 13:20:28 2011 +0200" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:26 2011 -0700" }, "message": "msm: sdio: expose SDIO_CIQ channel for test application\n\nDue to sdio tests for modem reset the CIQ test application\ncould no longer run in sdio_al test mode. This change will\nallow both CIQ test application and CIQ sdio tests to\nrun in SDIO test mode.\n\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "6dcc6704f31632ade9d5a849f9caf8778df7815b", "tree": "6041648fd9887c492d2b0ad02982eebe44b519e1", "parents": [ "f74479e5e7992646e0b843dbf1773b2d86e9af1d" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Tue Oct 04 11:56:27 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:26 2011 -0700" }, "message": "msm: msm_bus: Correctly validate the pointer to fabrics\n\nCorrect the if condition checking for validity\nof the pointer to the fabric data structure.\n\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "f74479e5e7992646e0b843dbf1773b2d86e9af1d", "tree": "e11d7de185c3db28e5e8787cfbce673b1936cadc", "parents": [ "2a563c34c4710cdbe051e80b27737f11f8ecf8ee" ], "author": { "name": "Larry Bassel", "email": "lbassel@codeaurora.org", "time": "Thu Sep 08 11:07:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:26 2011 -0700" }, "message": "msm: enable CONFIG_ARCH_POPULATES_NODE_MAP on 8960\n\nThis needs to be enabled so that the movable zone\nmay be placed exactly where the unstable memory is\nin forthcoming patches.\n\nSigned-off-by: Larry Bassel \u003clbassel@codeaurora.org\u003e\n" }, { "commit": "2a563c34c4710cdbe051e80b27737f11f8ecf8ee", "tree": "b651ee90e4127fdc47a07c478173e1784c257219", "parents": [ "621f8741a429f8dea92064a43fba5f183b18bdd5" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Oct 05 14:51:43 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:26 2011 -0700" }, "message": "msm: smd: Fix Modem-FW subsystem restart support\n\nCompletely close Modem SW\u003c-\u003eModem FW edge in SMD\nif the modem is restarted since Modem SW and\nModem FW are considered to be a single subsystem\nfor subsystem restart.\n\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "621f8741a429f8dea92064a43fba5f183b18bdd5", "tree": "1cac17afb29e2dcae25b0469baa8c5e41196d77b", "parents": [ "83e244655a2b3c895984adf78ecc87a8fbe1f44d" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Thu Sep 01 21:45:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:26 2011 -0700" }, "message": "msm: clock-8960: Add support for 8064 multimedia clocks\n\nAdd most multimedia clocks and more clocks including csi0_clk,\ngfx3d_axi_clk, csi_pix_clk, csi_rdi_clk, tv domain clocks,\ngfx3d_clk@325MHz will be added in later patch.\n\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n" }, { "commit": "83e244655a2b3c895984adf78ecc87a8fbe1f44d", "tree": "6e9e96d3ccee03fe1c538cbf7fbefc36cfbe0dd4", "parents": [ "e1ed1ae1d4c6d17ddb2a027ced9524c23e878d72" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Thu Sep 29 16:10:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:26 2011 -0700" }, "message": "msm: audio: qdsp6v2: Set tx and rx flags based on current device\n\nAdd error checks in device enabling and disabling for rx and\ntx paths; Modify tx and rx flags based on current active device\n\nCRs-fixed: 309437\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "2fee20e30bb5fa63e2c9d939584114224deb47e6", "tree": "8315ed683302559ef18b7b62e55be7d5f98a5666", "parents": [ "898340fb210b39a5fd2a6fbf9b66bb3082c34fba" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Sep 21 20:02:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:25 2011 -0700" }, "message": "defconfig: Enable KS8851 SPI Ethernet as a module\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "dc6f0198ef6b40d2c26d736940e1461c9a8185c5", "tree": "fd096c3a407436637153588bae7a3145fa6bbc66", "parents": [ "f07bd0b5fd3e9f8979413efa8e46be3bd9986cb6" ], "author": { "name": "Suren Eda Naarayana Kulothungan", "email": "sedanaar@codeaurora.org", "time": "Fri Sep 30 09:49:46 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:24 2011 -0700" }, "message": "msm: defconfig: Enable Oprofile and cpaccess by default for\n7x27a.\n\nSigned-off-by: Suren Eda Naarayana Kulothungan \u003csedanaar@codeaurora.org\u003e\n" }, { "commit": "f07bd0b5fd3e9f8979413efa8e46be3bd9986cb6", "tree": "28bec5389036340931f718e1f8329c20ce81d41e", "parents": [ "5226221101e7530b7542a6c60f2997d7354519e4" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Tue Sep 06 17:33:17 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:24 2011 -0700" }, "message": "msm: devices-9615: Initialize SPM registers for 9615\n\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "4dd9abee472d5922f862ea858ad1539ed9ac26b6", "tree": "eb6ae02a368da58e3ab2817611c50ddd9a67e570", "parents": [ "c719c541d8ec1c9a036002a80725457aab10e54f" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Jul 28 16:38:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:24 2011 -0700" }, "message": "defconfig: msm8660: Enable LCDC_MIPI_DETECT config\n\nEnable LCDC_MIPI_DETECT config common for all LCDC and MIPI\npanels supported on 8660 target\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "eede70ef6d48575a7c5a15c53ac7c31a169561d1", "tree": "8e2add9e5cbc4ff2518cc1c4b9a65bde3040c571", "parents": [ "61a7bd107a6b2d192e45f14fdafcc85ce0375238" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Wed Aug 24 17:36:08 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:23 2011 -0700" }, "message": "msm_fb: display: 7x27a support for panel auto detection.\n\nAdding support for LCDC and MIPI panels auto detection\nusing boot params. If no boot params are given, default\nMIPI CMD FWVGA Renesas gets picked up.\n\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "61a7bd107a6b2d192e45f14fdafcc85ce0375238", "tree": "1bc638e93f9656cf8faf9bde4a851e29aa1bfbf5", "parents": [ "f8e2195b54f137b3601ec8d05690a4c10e963ca0" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Jul 28 16:48:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:23 2011 -0700" }, "message": "board: msm8x60: Add LCDC and MIPI panel detection support\n\nAdd LCDC and MIPI panel detection support for panels\nsupported by 8660 target\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-qrdc.c\n\tarch/arm/mach-msm/board-qt8660.c\n" }, { "commit": "f8e2195b54f137b3601ec8d05690a4c10e963ca0", "tree": "f2bf20f44516a61518000d646b4f0490a0120e2c", "parents": [ "3d215a01238461441713929c184912f2dc8526ef" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Jul 28 16:47:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:23 2011 -0700" }, "message": "board: msm8960: Add MIPI panel detection support\n\nAdd MIPI panel detection support for different\npanels supported by 8960 target\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "3d215a01238461441713929c184912f2dc8526ef", "tree": "475e7f18affca26399247ace033ad873c68f206b", "parents": [ "823c14810ed9d5eab5af4ad7ac4057a348917d01" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Oct 03 10:12:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:23 2011 -0700" }, "message": "msm: acpuclock-8960: Temporarily disable secondary clock gating\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "3d849916b0a60c3c89bafa4fba8704c9c7f4d7cd", "tree": "6b989275ef2ec9f1917b62f948befb387e2a7199", "parents": [ "8150722eb9b1ecaadb3d9f3d29db0b2c6a42cf6f", "87051317b3ff9444eaaf9bf14733efd970d801d9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Oct 11 09:26:46 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Oct 11 09:26:46 2011 -0700" }, "message": "Merge \"arm: Fix a compilation error for the omap2plus defconfig.\" into msm-3.0" }, { "commit": "8150722eb9b1ecaadb3d9f3d29db0b2c6a42cf6f", "tree": "47931be428e7da7d931212f27f55a97d57535d43", "parents": [ "7421a83e898a5c759dd31912b05d01d4b5f2e4ed", "0fdb5ade0c01877f0503f13c865f7d57a7f09e46" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Oct 11 09:26:46 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Oct 11 09:26:46 2011 -0700" }, "message": "Merge \"msm: sdio: fix modem reset and card removal race condition\" into msm-3.0" }, { "commit": "7421a83e898a5c759dd31912b05d01d4b5f2e4ed", "tree": "bb812c686d0a7a0984a18476a01b376fdb11bbf6", "parents": [ "3cbdedd03557e1059b7ea5cbd9e0c4ab0acc1ad4", "b2e42e19672e8097c7a6e088bfe251757ab1bf60" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@quicinc.com", "time": "Mon Oct 10 15:00:14 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 10 15:00:14 2011 -0700" }, "message": "Merge \"msm: devices: Initialize MPM irq extensions for MSM9615\" into msm-3.0" }, { "commit": "3cbdedd03557e1059b7ea5cbd9e0c4ab0acc1ad4", "tree": "a776fa19e48acc008f333dfe61bb2a015755c3b9", "parents": [ "6daf642b3f28466a9fe8b788c11261c4b9022632", "e5e67727457003d546014ee26773a548e77bafe8" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@quicinc.com", "time": "Mon Oct 10 14:59:49 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 10 14:59:49 2011 -0700" }, "message": "Merge \"defconfig: Enable BT power control module in 3.0 kernel\" into msm-3.0" }, { "commit": "75ac515def508f0784570aeaa5f9e4e229e2927c", "tree": "e9dd8551c269b18debf55943d8536e98714bbcb6", "parents": [ "550aa1ab4be6af8caab655a5eac88cbe07040ee7", "fedb2430b9ab597d0d2720cc4cbaa8baf2756e06" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@quicinc.com", "time": "Mon Oct 10 14:59:13 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 10 14:59:13 2011 -0700" }, "message": "Merge \"msm: gpio-v2: Add missing gpio_chip label\" into msm-3.0" }, { "commit": "e5e67727457003d546014ee26773a548e77bafe8", "tree": "91d9de29422d5a78bf45a03dd1bbd37823866c87", "parents": [ "550aa1ab4be6af8caab655a5eac88cbe07040ee7" ], "author": { "name": "Rahul Kashyap", "email": "rkashyap@codeaurora.org", "time": "Mon Oct 10 12:43:25 2011 +0530" }, "committer": { "name": "Rahul Kashyap", "email": "rkashyap@codeaurora.org", "time": "Mon Oct 10 12:47:44 2011 +0530" }, "message": "defconfig: Enable BT power control module in 3.0 kernel\n\nChange-Id: Idb8fc9bbd2690c096fb27a43c66ec635f5da5748\nSigned-off-by: Rahul Kashyap \u003crkashyap@codeaurora.org\u003e\n" }, { "commit": "b2e42e19672e8097c7a6e088bfe251757ab1bf60", "tree": "330f78ecfcab91296bf7d62e37231ab2d5bf1363", "parents": [ "550aa1ab4be6af8caab655a5eac88cbe07040ee7" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Fri Oct 07 21:25:53 2011 -0700" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Sun Oct 09 17:10:44 2011 -0700" }, "message": "msm: devices: Initialize MPM irq extensions for MSM9615\n\nInitialize the mpm irq callbacks, so that the mpm\ncan be programmed for wakeup interrupts.\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\nChange-Id: I43611f35cc6fb9ec9539f4a86c84984dc55593e3\n" }, { "commit": "0fdb5ade0c01877f0503f13c865f7d57a7f09e46", "tree": "731eea89a590210ff5b42d700bc1eddce345ca7e", "parents": [ "550aa1ab4be6af8caab655a5eac88cbe07040ee7" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Sun Oct 09 19:16:27 2011 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Sun Oct 09 19:16:27 2011 +0200" }, "message": "msm: sdio: fix modem reset and card removal race condition\n\nIn cases where the modem HW watchdog causes a modem reset\nwe can get a card removal event in the middle of modem\nreset event.\n\nChange-Id: Ieef2f463f916054b16c8c0d02bf5cf775852ac06\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "fedb2430b9ab597d0d2720cc4cbaa8baf2756e06", "tree": "cd90f13a14e793dcd0ffdd6dd9bdcb253a5222b6", "parents": [ "98f5fd413f051db8407a53f583a46a1c3fb99657" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri Oct 07 16:11:38 2011 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri Oct 07 16:15:48 2011 -0700" }, "message": "msm: gpio-v2: Add missing gpio_chip label\n\nThis label is expected by our unit tests.\n\nChange-Id: Ibfbecbf95fde317dd3dd96c0e772ab4742bc2126\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "550aa1ab4be6af8caab655a5eac88cbe07040ee7", "tree": "c7b99f3f92a32a266bba233022aee2f5cff185b8", "parents": [ "98f5fd413f051db8407a53f583a46a1c3fb99657" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Thu Oct 06 21:15:37 2011 -0700" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Thu Oct 06 21:25:33 2011 -0700" }, "message": "arm: gic: create empty stub gic_set_wake when !CONFIG_PM\n\nReturn success when CONFIG_PM is not defined instead of\nreturning failure.\n\nChange-Id: Ibbdde7460d68d49d0554d88d77ddef3bec01508c\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "87051317b3ff9444eaaf9bf14733efd970d801d9", "tree": "2d6222d223501591ba5c9cbe7b7cc02426ea3a4e", "parents": [ "be22b993a21b682a11b9c28f5c7d4f52247f0685" ], "author": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Thu Oct 06 12:09:42 2011 -0700" }, "committer": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Thu Oct 06 12:11:55 2011 -0700" }, "message": "arm: Fix a compilation error for the omap2plus defconfig.\n\nAdd a missing header include to fix a compilation error for\nomap2plus_defconfig on msm-3.0 tree.\n\nChange-Id: I9ea45910651ef63258c90035bb9b5480c52ffe01\nSigned-off-by: Naveen Ramaraj \u003cnramaraj@codeaurora.org\u003e\n" }, { "commit": "65c3b1d5789ed6fd3b663950ffc891e2f91af18f", "tree": "482e390ecc2874eb4bb644af6e268e1b580f384b", "parents": [ "66351ff7b7c04654c28989a2541f617db000aba5" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Tue Sep 20 12:53:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:28:55 2011 -0700" }, "message": "camera: Optimize bus scaling table for 8960.\n\nChange-Id: I4db338d173a99a18ba8ab86bd8f34dc322e54ff7\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "66351ff7b7c04654c28989a2541f617db000aba5", "tree": "e52d5269d2076375b1cf0917a1f77bd5bd620eb0", "parents": [ "7c81dfa042c8705ac7dd2e80018bb5eac56c0d05" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Tue Jul 19 20:48:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:28:52 2011 -0700" }, "message": "msm: acpuclock-8x60: Update CPU voltages for 1.5GHz frequency tables\n\nUpdate the voltages with the proposed S/W setting based on HW\ncharacterization data to reduce power consumption.\n\nChange-Id: Ib6ccdbc8a66e749223b20164ddd6490525870d57\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n" }, { "commit": "7c81dfa042c8705ac7dd2e80018bb5eac56c0d05", "tree": "3af4a0231dcde400a183f2f5a6be4540d160c77b", "parents": [ "5a4f1ba19d0172fe3566f3df5bc78844d84c485b" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Wed Jul 27 12:15:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:28:45 2011 -0700" }, "message": "msm: board-msm8x60: Update min voltage for regultor 8901\n\nUpdate min voltage for 8901_s0 and 8901_s1 regulators based on\nHW characterization data.\n\nChange-Id: If6ca9997b5a75ccbc98bcb8f79569de8d5bada4a\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-qrdc.c\n\tarch/arm/mach-msm/board-qt8660.c\n" }, { "commit": "5a4f1ba19d0172fe3566f3df5bc78844d84c485b", "tree": "98bb72a2d44ac30fd2db14eb9c6d2ca79bbfd5ba", "parents": [ "47b3f83b789572b53810c06e67d2dcb4dc2370d9" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Aug 18 18:13:03 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:28:04 2011 -0700" }, "message": "msm: hdmi: Register device with clock driver and rename clocks\n\nRename the clocks per the new naming convention under which\nsimilarly named clocks are distinguished between using their\nassociated device\u0027s name and ID.\n\nChange-Id: I35f164e902003b1c3cd7243bc08d00b4c5d37b0c\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "93d79ecd11a79a097a5c051438d9c3502902af6e", "tree": "47326b900e05c681370345c444278145ffd582a4", "parents": [ "738b458d5dddd549a422fb7b9052e2938d510694" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Sep 21 16:52:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:56 2011 -0700" }, "message": "ks8851: Add GPIO configuration platform data\n\nAdd platform data for the KS8851 SPI Ethernet device to\nenable proper GPIO configuration for the reset and\ninterrupt pins.\n\nChange-Id: I79adae4628f38a2ca5bc17825258c41ab5e1623d\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "738b458d5dddd549a422fb7b9052e2938d510694", "tree": "684b00c8276e347b7d453f83a6982bb9ca777b3d", "parents": [ "4acbdd5c375ec73e0fad73d9d62cc8afccfb2b48" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Tue Sep 06 17:26:24 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:53 2011 -0700" }, "message": "msm: spm: Enable SPM V2 for 9615\n\nChange-Id: Ia657bd51d098334c0d39bf2155a4a53272b37766\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "eb9e60dc8e78dd7a3bbf707c435da23b260aec9b", "tree": "c52f094d33881a234c5a65020d82e01344b56433", "parents": [ "5289052dbb990229f659b3d32a4b31d53e3b49b2" ], "author": { "name": "Anji jonnala", "email": "anjir@codeaurora.org", "time": "Wed Oct 05 12:19:46 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:47 2011 -0700" }, "message": "USB: msm: 8x60: Configure PMIC ID interrupt as wakeup interrupt\n\nChange-Id: I2f0d80b85ca97b2453ef8ef7ba93daa644cbe158\nCRs-fixed: 309451\nSigned-off-by: Anji jonnala \u003canjir@codeaurora.org\u003e\n" }, { "commit": "5289052dbb990229f659b3d32a4b31d53e3b49b2", "tree": "0ea5f2442ff0d9f96dcc77cb48fdb84f29c4b520", "parents": [ "ad0d9ac6cc33287f61372a93ad1041891d87a57c" ], "author": { "name": "Konstantin Dorfman", "email": "kdorfman@codeaurora.org", "time": "Wed Oct 05 11:03:19 2011 +0200" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:43 2011 -0700" }, "message": "msm: sdio: Close all open channels on shutdown.\n\n1.Add channel_close(ch, flush_flag) to turn off flush when shutdown\n2. separate reset and shutdown callbacks\n3. close all opened channels when shutdown\n\nSigned-off-by: Konstantin Dorfman \u003ckdorfman@codeaurora.org\u003e\nChange-Id: I779f1802860f07eb56aef83de445072c739443dc\n" }, { "commit": "ad0d9ac6cc33287f61372a93ad1041891d87a57c", "tree": "eb2c067070992a0020572ea4cb9247cfb912727f", "parents": [ "ab3b1c4d53f728b5795ace8452c9cdc2d6cc75c9" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Mon Sep 26 11:49:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:40 2011 -0700" }, "message": "wcnss: Configuration of Iris 5-wire GPIOs by WCNSS driver\n\nGPIOs tied to 5-wire interface to Iris must be controlled from within\nWCNSS Platform Driver. This allows the platform driver to free the GPIO\nresources and park them in a suspend mode (when appropriate) for power\nsavings\n\nChange-Id: Ieaaf636f87e82e1b2c5b2ffa16b3a5d9e1c6fc33\nAcked-by: Kumar Anand \u003ckanand@qca.qualcomm.com\u003e\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "ab3b1c4d53f728b5795ace8452c9cdc2d6cc75c9", "tree": "7e5f4889e02d071580c400d04bdb922321fbb87f", "parents": [ "671e5941f58d2f1f2cfba4b003f3cc0032175cf6" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Thu Aug 25 08:44:05 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:27 2011 -0700" }, "message": "msm: 9615: Enable RPM and MPM support for MSM9615\n\nChange-Id: I9bf9f07fd8778f302eba94a0f8d4ac329d19002e\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-9615.c\n" }, { "commit": "be22b993a21b682a11b9c28f5c7d4f52247f0685", "tree": "3221b2f2df47be7d7c8854d037cceeed197858dc", "parents": [ "f81dcd0e757657a5c591d21e897be277f20eb7c5" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 12:37:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 12:37:00 2011 -0700" }, "message": "defconfig: automatic update\n\nSigned-off-by: Bryan Huntsman \u003cbryanh@codeaurora.org\u003e\n" }, { "commit": "e49436af7ed9b91d50360a666f3959579fe33c7c", "tree": "57aa550dfbace696b3e8b80dd0bb9cfc6b363075", "parents": [ "f7c1cefb69084819dec8fe45d83b7acfe81ce002" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Wed Sep 28 16:07:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:36:35 2011 -0700" }, "message": "camera: 8960: Enable dynamic VFE clock scaling.\n\nWhenever sensor pixel clock changes, round the VFE clock\nto the minimum clock that are greater or equal to the pixel clock.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "3a77f9f790d62d2e5a75a9674b39e6186278531f", "tree": "865c0f7a40c514133df03bdcef2b8f4998f07af4", "parents": [ "f802090966056707136722f1148d31371b349ebc" ], "author": { "name": "Jeff Ohlstein", "email": "johlstei@codeaurora.org", "time": "Tue Sep 06 14:50:20 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:36:26 2011 -0700" }, "message": "socinfo: initialize socinfo in map_io\n\nHaving socinfo earlier allows the cpu_is functions to be used by the\ntimer driver, which helps in allowing multitarget compilation.\n\nSigned-off-by: Jeff Ohlstein \u003cjohlstei@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-qrdc.c\n\tarch/arm/mach-msm/board-qt8660.c\n" }, { "commit": "f802090966056707136722f1148d31371b349ebc", "tree": "fc4e6530277a92333fd181c2d41e1d22966e319e", "parents": [ "c0055a1e92d713993f221d145aef38b4934e7249" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Aug 30 21:19:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:35:58 2011 -0700" }, "message": "msm: sysmon: Add the System Monitor communication library\n\nThe System Monitor communication library provides a single API that\ncan be used to send a notifications of peripheral state changes to\nother peripherals using SMD channels.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "dc1dc14b351d09b3c44297498878ab76ae7f218f", "tree": "6484304becf5d291c64189f3c225b49d71823607", "parents": [ "468977e5fe8fc61718fb0c1365cd321c3a5082cb" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Fri Sep 16 15:13:35 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:35:42 2011 -0700" }, "message": "msm: msm_bus: Set RPM register bit for Multi-tiering support\n\nThis bit must set during init, for RPM to decode the\nfabric data for multi-tiering.\n\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "468977e5fe8fc61718fb0c1365cd321c3a5082cb", "tree": "0f204811bc662e55f7e7eb89d640cd83a6c3a4b9", "parents": [ "c9a2e6d9d884240fd14e7162e6352c8952abb901" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Wed Sep 28 11:29:08 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:35:39 2011 -0700" }, "message": "defconfig: msm8960: enable HSIC host support\n\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "c9a2e6d9d884240fd14e7162e6352c8952abb901", "tree": "2c9c3e5c0ac76f342135c83ccf97599b0580aab2", "parents": [ "2aba4e8b5e3aaac879ab2f0f88ee6396cdab30a7" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Mon Sep 12 15:27:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:34:51 2011 -0700" }, "message": "msm_fb:display: add writeback offset to 8x60 board files\n\nPass writeback offset from board file to MDP.\n\nSigned-off-by: kuogee hsieh \u003ckhsieh@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-qt8660.c\n" }, { "commit": "cc969450f3754936608ba82b74af7f1f2828abc1", "tree": "f48e425795acefc9f58740ac6de81c07d9f6bb29", "parents": [ "700819df8a4d1d918103e51bbeb7a662ad99b636" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Mon Sep 19 10:34:30 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:28:05 2011 -0700" }, "message": "msm8960: slim: Program slimbus slew rate register\n\nIf applicable, make sure that slimbus doesn\u0027t violate slew rate spec\nby programming the slimbus slew rate register\n\nCRs-Fixed: 307733\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "700819df8a4d1d918103e51bbeb7a662ad99b636", "tree": "fc2127d48502c3fd549316c363c4aaa915442888", "parents": [ "8d440571f2233525fc8c90dc20708d1f1f1c3698" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Fri Sep 30 17:14:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:28:02 2011 -0700" }, "message": "tzcom: Rename playrdy to tzapps\n\nAlso fix a pil_put() bug while we\u0027re at it.\n\nCRs-Fixed: 307844\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "8d440571f2233525fc8c90dc20708d1f1f1c3698", "tree": "c253eae38442ef3759ea773c18615af6b93ebcc2", "parents": [ "b59ce2a204a70e75c5203197d5d2b63142c36966" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 24 22:45:35 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:27:59 2011 -0700" }, "message": "msm: pil-8960: Add support for loading tzapps images\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "b59ce2a204a70e75c5203197d5d2b63142c36966", "tree": "ea84d120b58f80d33ff6ebae2ee7a92c6bca00db", "parents": [ "4d364c299d9b66b3837fcd82db36fe9b26ce413e" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Tue Oct 04 22:53:32 2011 +0200" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:27:56 2011 -0700" }, "message": "msm: sdio: printouts only occurs if LPM RANDOM test fails\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "4a053045c93dd6612c91796d3644135ea284fe52", "tree": "ff8063a447b4f6ea6ae8fd734f8d6c33fe1953b0", "parents": [ "1429568ba55646240d551e8f8f9bdd25e4cb249f" ], "author": { "name": "Wentao Xu", "email": "wentaox@codeaurora.org", "time": "Mon Oct 03 14:06:34 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:27:51 2011 -0700" }, "message": "msm: 8x60: fix the clock request for dsps\n\nDelay the request until the device is created, and change the name\nin clock table to match the device\u0027s\n\nSigned-off-by: Wentao Xu \u003cwentaox@codeaurora.org\u003e\n" }, { "commit": "b9171e590adf098e63760d301d5dcf0d9e577787", "tree": "cb789bbd3ef3361f780025358b344fb88cb7dbcd", "parents": [ "e519dd618e1f456fa85a6e9ed065e32278deb601" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Tue Mar 15 15:18:18 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:27:39 2011 -0700" }, "message": "msm: audio: qdsp5: NT mode encoding support for AMRNB\n\nAdd Non Tunnel mode AMRNB encoding support for 7x27a.\n\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "ad7c9a8e140f0221dc249428507135ac5096a965", "tree": "bad42f9e9f09a558045c58940769dda640b915eb", "parents": [ "9ec83cd011871c2138aadfb0352466f99115dd22" ], "author": { "name": "Sujith Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Fri Sep 30 20:54:38 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:27:27 2011 -0700" }, "message": "msm: board-msm7x27a: Register SDCC controllers after msm datamover\n\nSDCC is client of data mover and should be registered after it.\nThis ensures that datamover is always suspended after SDCC allowing\ndatamover to turn off its clocks and vote for TCXO shutdown.\n\nCRs-Fixed: 308564\nSigned-off-by: Sujith Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "242c853a3b675e00ac813aba7abdd1561132fb28", "tree": "732e6c8280b5eddaa6dd98a96fd1ef08f1e73b3a", "parents": [ "32fae1a69e7f80c0e5ac1bfc2d945ead2db9330e" ], "author": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Thu Sep 29 12:23:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:27:20 2011 -0700" }, "message": "msm: audio: qdsp5v2: Restore popp gain when HLB is enabled\n\nRestore the POPP gain to 0x2000 when deviece is moved from\nNON HLB to HLB.\n\nCRs-Fixed: 306560\nSigned-off-by: Santosh Mardi \u003cgsantosh@codeaurora.org\u003e\n" }, { "commit": "865f2cac2aaacd9fccdcf8d06345bd000da0b900", "tree": "cd1b7cdc149524b216bed57ec281348a6f8402c7", "parents": [ "7ad06d89d473a26dc48584031895ec5116bb7511" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Mon Oct 03 17:40:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:27:10 2011 -0700" }, "message": "socinfo: Add additional SoC ID for MSM9615\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "7ad06d89d473a26dc48584031895ec5116bb7511", "tree": "622083aef2d5e7fbf1439b8c517d31afaf9aab15", "parents": [ "55cff404bda1debf037e6a9c5583f509f5c9aca9" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Sun Oct 02 15:47:57 2011 +0200" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:27:07 2011 -0700" }, "message": "msm: sdio: add debugfs ability to control open/close debug messages\n\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "55cff404bda1debf037e6a9c5583f509f5c9aca9", "tree": "178ebdb91a5cf035ea10a8637bb86940cf119c4e", "parents": [ "d0c5dd51e166ebf581729586dfd79dfddddcd58d" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:30:55 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:30:55 2011 -0700" }, "message": "defconfig: automatic update\n\nSigned-off-by: Bryan Huntsman \u003cbryanh@codeaurora.org\u003e\n" }, { "commit": "43208a0bf53d12f2df5bc662c34697f268dbefcc", "tree": "b01bfbf6eb21ea0de7dc7ca9f0fceb81106b87b7", "parents": [ "c98bfbc613a66ad512617c1ae63c072d5961cb0f" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Tue Sep 27 15:35:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:37 2011 -0700" }, "message": "msm: clock-8960: Add sdc clk support for 8064\n\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n" }, { "commit": "c98bfbc613a66ad512617c1ae63c072d5961cb0f", "tree": "74f9b9466c1fd1814a409022da676290f6b4707e", "parents": [ "ffdaec83833d773d1fe10671290c7c4ba4d8692c" ], "author": { "name": "Taniya Das", "email": "tdas@codeaurora.org", "time": "Tue Aug 23 09:58:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:36 2011 -0700" }, "message": "msm: board-qrd7627a: Add support for 7627a QRD device\n\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\n" }, { "commit": "ffdaec83833d773d1fe10671290c7c4ba4d8692c", "tree": "06a0aafd41d773dee2343af5cc91933819be3257", "parents": [ "767fdda6e12ab7810a910036b52fa3f330afef76" ], "author": { "name": "Pankaj Kumar", "email": "pakuma@codeaurora.org", "time": "Mon Sep 26 12:24:45 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:35 2011 -0700" }, "message": "msm: board-msm7x27a: Fix compilation when framebuffer support is disabled.\n\nAdd Config macros for MSM framebuffer to fix the compilation\nwhen CONFIG_FB_MSM is disabled.\n\nSigned-off-by: Pankaj Kumar \u003cpakuma@codeaurora.org\u003e\n" }, { "commit": "767fdda6e12ab7810a910036b52fa3f330afef76", "tree": "0d5cab415de8952c6de04ae6ea32def059dd2db9", "parents": [ "c1824d5b833848cd1a01a3ca526a38da6a20a12c" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Mon Aug 15 15:49:45 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:34 2011 -0700" }, "message": "msm: kgsl: Introduce Iommu Code\n\nkgsl now supports the use of 2 types of MMU. One is\nthe GPU\u0027s internal MMU and the other is IOMMU. Both\nMMU cannot be active at the same time. The MMU type\ncan be selected at compile time via config option.\nA boot command line parameter can be used to override\nthe type of MMU selected at compile time.\n\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "121caec45b47075ee979e5378b1f8d2b2184b7dd", "tree": "8f4d3950b3295073bd0685d3cc7bb82bacb36c0a", "parents": [ "5ff7784d8fc6ee8156d01b39601cf5b6b15e0fc1" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Sat Oct 01 08:32:05 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:33 2011 -0700" }, "message": "msm: nand: compile nand_partitions.c for all NAND based targets\n\nThe recent commit bad89b doesn\u0027t compile nand_partitions.c for 9615\non which it must be compiled. This patch fixes it.\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "5ff7784d8fc6ee8156d01b39601cf5b6b15e0fc1", "tree": "8fa1575ac2d4fa466d3b6bd796ce46ad34a21997", "parents": [ "4d3ebd4aaec256038c6c061e54278a45f60af3f8" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Fri Sep 23 15:59:37 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:32 2011 -0700" }, "message": "msm: sdio_ctl: Export a new SDIO Control port to support CSVT\n\nAdd a new MUXed control port for use by Video Telephony and export\nit to be used from user-space\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "4d3ebd4aaec256038c6c061e54278a45f60af3f8", "tree": "3375a3eb8c31ddd428398a9b5e68d1149fdac01d", "parents": [ "f4c973de77b21847c71ce151cd880972cab9989f" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Tue Sep 27 12:54:07 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:31 2011 -0700" }, "message": "msm: sdio_cmux: Add a new CMUX channel for Video telephony support\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "f8032602dc5f77c95b0446da84165dbf0d784b3c", "tree": "18872f18068a65832751d11488108acc4a4e0a59", "parents": [ "dad535aa00da6d5dc06590a9820aaf822704c105" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Jun 15 23:01:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:30 2011 -0700" }, "message": "msm: clock-8x60: Gate smi_2x_axi_clk off when smi_clk is disabled\n\nTake ownership of smi_2x_axi_clk which was previous left enabled\nat all times. The rate of smi_2x_axi_clk is still controlled by\nthe RPM and influenced by smi_clk, but the branch enable is now\ncontrolled locally. Prior to enabling smi_clk (ie. sending a rate\nto its RPM resource), the smi_2x_axi_clk must be enabled.\nTherefore, it\u0027s marked as a dependency for smi_clk.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "dad535aa00da6d5dc06590a9820aaf822704c105", "tree": "9327dfe130ebea1d726ca3fd810772739613858d", "parents": [ "bf0b1ff86ba6759929e33b0acc09d8e4ca41cb95" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Fri Sep 09 10:59:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:29 2011 -0700" }, "message": "msm: 8064: Add socinfo id for rumi3\n\nExpose socinfo id to rumi platform.\n\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "eb56648215514b04a532fe83fb3d67a19e876390", "tree": "2e4da3770e2fd75ed168917a2763b7daf5e3683f", "parents": [ "41515e28c19ce845ede571cc3273ee90c502c2b9" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Sun Sep 18 07:48:37 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:28 2011 -0700" }, "message": "msm: board-msm8960: Add support for USB HSIC Host mode\n\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-msm8960.c\n" }, { "commit": "41515e28c19ce845ede571cc3273ee90c502c2b9", "tree": "0c1c56d6ba303cc893025a3530e93869d1046553", "parents": [ "0272fd66c2bc00a54df3dbd1e4d97d1db70db918" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Thu Sep 01 19:37:43 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:27 2011 -0700" }, "message": "msm: clock-8960: Add initial support for 8064 clocks\n\nAdd new clocks. Reuse common clocks from 8960 in the 8064 clock look up\ntable. For modified clocks, use cpu_is_xxxx() APIs to fix them up at init.\n\nMore clocks will be added in later patches.\n\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n" }, { "commit": "0272fd66c2bc00a54df3dbd1e4d97d1db70db918", "tree": "794a911a26d8190bb02d414e5150c70f5a47a660", "parents": [ "b73accec42b6d12d1374597a708ff84827cef399" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Mon Sep 26 15:06:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:27 2011 -0700" }, "message": "msm: iommu: Add TLB MHF workaround\n\nPerform a context TLBIVA operation following a TLBIALL\noperation.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "6425f69b3867c6ecbe17c37489d2ed0f168e8ea7", "tree": "6195d9fd75a1b84aad70ea1275848a82f021b21a", "parents": [ "e8f280253c4910eb1187c598d3c66b5644888b3c" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Fri Sep 23 14:57:43 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:24 2011 -0700" }, "message": "msm: sdio_ctl: Add the CMUX channel id lookup table\n\nSince the CMUX channels exported to user-space are getting\nnon-continuous add a lookup table to identify the channel ids.\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "07cb96bf0d62ab8f0d59d6a0c521521c20e5d6d1", "tree": "394860dc0d0e1e61de38948e4542df535dff6b27", "parents": [ "57b34bbdca587ed67ed3d6fc9a83cf3564ac770d" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Fri Sep 30 19:48:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:23 2011 -0700" }, "message": "defconfig: 9615: Disable CONFIG_ASHMEM\n\nMSM9615 does not need ASHMEM. It\u0027s Android specific.\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/configs/msm9615_defconfig\n" }, { "commit": "b9209474ab4f2f300bc92c9a81dfde4bd507e484", "tree": "fd9aef32076e91061c5300b5827f44f8ba61a9d3", "parents": [ "6abb4fcb6ff8ecabbb0f10fe0bab1a99c63403aa" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Tue Sep 27 17:56:20 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:21 2011 -0700" }, "message": "msm: audio: qdsp6v2: Close smd ports upon failure to open.\n\nThe smd port acqusition is failing as the port is not\npopulated from modem . But apr driver was not releasing\nthe apr handle on failure.\nThis was resulting in failure for subsequent calls.\nWith this change, the smd ports will be released upon\nencountering failure.\n\nCRs-fixed: 309413\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "6abb4fcb6ff8ecabbb0f10fe0bab1a99c63403aa", "tree": "f0ca7763648995935df3fbd97aad143d6441587e", "parents": [ "efafaa89d76975341fbad2c7a411610c02f3bb6c" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Tue Aug 23 11:08:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:21 2011 -0700" }, "message": "msm: clock-8960: Add 512KHz entry to the OSR clock table.\n\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "efafaa89d76975341fbad2c7a411610c02f3bb6c", "tree": "5adacf8ca825769398742a73d2fead84a287dc36", "parents": [ "2bfba2c16c99e9f58557cad3f6dccfdd7648c57f" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Sep 21 12:41:28 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:20 2011 -0700" }, "message": "msm: sdio: test sdio_close on SDIO_SMEM channel\n\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "2bfba2c16c99e9f58557cad3f6dccfdd7648c57f", "tree": "d364db41cf9ee91f213678f05c6329a4b37224c8", "parents": [ "014319769fb3c77a65b56d66818229ba8e2beb43" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Mon Sep 19 11:41:55 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:20 2011 -0700" }, "message": "msm: sdio: add support to sdio_close on SDIO_SMEM channel\n\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "014319769fb3c77a65b56d66818229ba8e2beb43", "tree": "5c72198f26f5eb0bd497bcf33209318356d95b27", "parents": [ "f5764e84f969801b6752dfb6a56f8f714cf5e7e4" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Mon Oct 03 13:52:26 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:19 2011 -0700" }, "message": "msm: 8064: Enable 8-bit bus width for SDC1\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "f5764e84f969801b6752dfb6a56f8f714cf5e7e4", "tree": "e1b65029af077915e7df2018f1e35f51145ee044", "parents": [ "71aef188b28ed06c44bebbe9d2c02be7296a0597" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Mon Oct 03 13:46:00 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:18 2011 -0700" }, "message": "msm: 8064: configure SDC1 and SDC3 clock pin to NO PULL mode\n\nAt power on, by default SDC1 and SDC3 clock pins are configured\nin NO PULL mode and currently driver depends on this power\non default state to keep the clock lines in NO PULL mode.\nBut this change explicitly configures the clock pins to\nNO PULL mode.\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "71aef188b28ed06c44bebbe9d2c02be7296a0597", "tree": "e95f92234d993f3500a8681360f6f236dd5e1e9c", "parents": [ "dd794463b47793f1b1da17bce8c7932de04bbb86" ], "author": { "name": "Krishna Konda", "email": "kkonda@codeaurora.org", "time": "Sat Oct 01 02:27:51 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:18 2011 -0700" }, "message": "msm: 9615: Add SDC2 platform data and GPIO information\n\nAdding the platform data, gpio configuration and initialize\nthe SDC2 controller in PIO mode.\n\nSigned-off-by: Krishna Konda \u003ckkonda@codeaurora.org\u003e\n" }, { "commit": "dd794463b47793f1b1da17bce8c7932de04bbb86", "tree": "ae8c7af7c5bff74a19e59b0846fe4a38a67db77b", "parents": [ "73ffe581199b7f58899f43003655a9a439208560" ], "author": { "name": "Krishna Konda", "email": "kkonda@codeaurora.org", "time": "Sat Oct 01 00:19:29 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:17 2011 -0700" }, "message": "msm: 9615: Add SDC1 platform data and GPIO information\n\nAdding the platform data, gpio configuration and initialize\nthe SDC1 controller in PIO mode.\n\nSigned-off-by: Krishna Konda \u003ckkonda@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-9615.c\n" }, { "commit": "73ffe581199b7f58899f43003655a9a439208560", "tree": "fb8d4a47a67e9f705901941d4b7dbd39e4393329", "parents": [ "fa53b9fbfb00a3ee49f51e79ae6a1aede83cdcc4" ], "author": { "name": "Ashwin Chaugule", "email": "ashwinc@codeaurora.org", "time": "Tue Aug 09 14:47:40 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:17 2011 -0700" }, "message": "ARM: Perfevents: Make L2 Cycle counter raw code consistent\n\nThe L2 cycle counter is a different counter than the one used\nfor counting L1 cycles but they shared the same raw code,\n0xff only to be differentiated by the PMU_TYPE_SHARED identifier.\n\nperf stat -e rsff counted L2 cycles\nperf stat -e rff counted L1 cycles\n\nKeep the raw event code for the two separate.\n0xfe for L2 cycles reduces chances of counting the wrong\nthing accidently.\n\nSigned-off-by: Ashwin Chaugule \u003cashwinc@codeaurora.org\u003e\n" }, { "commit": "d4e809ea8cca0ae779706dd17a2d36af26efadca", "tree": "0c5103b84a56fd8a1ae4bef33302eca85a85c88c", "parents": [ "b3e55c62ed450df70548e700b8939c00d1af1fbc" ], "author": { "name": "Larry Bassel", "email": "lbassel@codeaurora.org", "time": "Thu Sep 08 10:46:49 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:15 2011 -0700" }, "message": "arm: add support for ARCH_POPULATES_NODE_MAP\n\nARCH_POPULATES_NODE_MAP is used by most of the other\narchitectures and allows finer-grained control of\nhow and where zones are placed.\n\nSigned-off-by: Larry Bassel \u003clbassel@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mm/init.c\n" }, { "commit": "b3e55c62ed450df70548e700b8939c00d1af1fbc", "tree": "5fdfcf5bfc83a019507c0dd7166eb509999c322e", "parents": [ "9dfa87181ae79c9602839afa3c2f2011f094a312" ], "author": { "name": "Pankaj Kumar", "email": "pakuma@codeaurora.org", "time": "Mon Sep 26 11:59:39 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:15 2011 -0700" }, "message": "msm: board-msm7x27a: Fix compilation when MMC support is disabled.\n\nAdd Config macros for MMC to fix the compilation\nwhen CONFIG_MMC_MSM is disabled.\n\nSigned-off-by: Pankaj Kumar \u003cpakuma@codeaurora.org\u003e\n" }, { "commit": "9dfa87181ae79c9602839afa3c2f2011f094a312", "tree": "848037dfec132ca5de297ca449eaf77a58501e1a", "parents": [ "e44ec3992cc30a8b85c223e5750bbe8a344b37c0" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Wed Sep 14 16:25:01 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:14 2011 -0700" }, "message": "msm: rpm_resources: Add ability to write specific bits to resources\n\nSome RPM resources like RPM_CTL have configuration registers where\ndifferent bits mean different functionality. Add API to modify values\nof bit values of RPM resources for active context.\n\nAlso, remove previously forced option to disallow-cpu-halt on RPM\nfrom the driver.\n\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "e44ec3992cc30a8b85c223e5750bbe8a344b37c0", "tree": "38b6b6359d208cb7f8a5e4203583f8c56c4e3f93", "parents": [ "72fef236d02eae788529b72208d573e55dbfdd22" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Aug 29 12:03:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:14 2011 -0700" }, "message": "msm: pil: Extract secure PIL operations\n\nMove secure pil code into one file so we stop duplicating it in\neach peripheral-reset-$(ARCH) file.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "77d106ea896f3c77515fb982e35c96d0861d8928", "tree": "42bd300a872239ec3dd2d7efe2b919fac4062b6d", "parents": [ "43e46a32dec07e5179fda7400b77b16c81b70d88" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Sep 20 16:25:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:12 2011 -0700" }, "message": "hwmon: pm8921-adc: Add sysfs interface\n\n-Add sysfs interface to read PM8921 HK/XOADC\nand thermistor temperature measurements mapped\nthrough MPP\u0027s.\n-Move PM8921 ADC from directory /drivers/mfd to\n/drivers/hwmon for userspace clients to read ADC\nthrough hwmon.\n\nCRs-Fixed: 302365\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/Kconfig\n" }, { "commit": "9259fef5a7d30ec23974272302b6396ee6b1a2aa", "tree": "99b56d2144a2cf60299b4264d5b9aa4d0c5a18a4", "parents": [ "2c704c926f9416376c4ce283f3f442a9727dba0b" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Sat Sep 24 19:07:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:10 2011 -0700" }, "message": "msm: restart: call secure code to disable arbiter\n\nThe other masters in the MSM could be accessing the pmic while\npmic has raised the reset interrupt. This might cause pmic\nlockups.\n\nDisable the pmic arbiter by calling secure code when we handle\nthe reset interrupt from pmic. This will disable all the ssbi\ntransactions to the pmic avoiding a possible lockup.\n\nAlso since we wont be lowering ps_hold for pmic initiated startups\npiggy back on lower_pshold to return from the power off function\nso that we can call in the secure manager as the last step.\n\nAdditionally, since we will be busy looping until the pmic resets\nus, pet the watchdog.\n\nCRs-Fixed: 306410\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "63fa3d3d588f6f5953ba2f37af98af67bfc61e08", "tree": "c54588e3608c32a09e31199cd2d9220369550b4b", "parents": [ "a7af6062f7564a7f452d4479b5ead43bdea7e3b5" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Thu Sep 29 17:06:26 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:09 2011 -0700" }, "message": "msm: smd_pkt: Avoid using deprecated functions\n\nsprintf is a deprecated function and hence use snprintf.\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "a7af6062f7564a7f452d4479b5ead43bdea7e3b5", "tree": "0e11aeda77d4be38b123b87975715597865808a2", "parents": [ "065e8ff2cd92a4ab2c83801f3f67c54f4c2739ef" ], "author": { "name": "Krishna Konda", "email": "kkonda@codeaurora.org", "time": "Thu Sep 01 18:34:38 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:09 2011 -0700" }, "message": "msm: sdio: Keep certain messages in a local buffer\n\nWhile logging to the kernel log, keep the last 20 or so messages in\na local buffer. This can be accessed by debugfs or through a crash\ndump. This is useful when there is heavy logging to the kernel log\nand sdio messages are lost.\n\nSigned-off-by: Krishna Konda \u003ckkonda@codeaurora.org\u003e\n" }, { "commit": "84ecd0aef3e401d42939637be1d1fd3dbb676159", "tree": "1074b6a00c815a27db859df254ebae513033defb", "parents": [ "1517952281fed674b9d0e4e614a2e3d296fc6eba" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Sep 27 21:11:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:07 2011 -0700" }, "message": "msm: mpm: 8960: add more wlan interrupts to the bypassed list\n\nAdd these two interrupts managed by the wlan driver into the\nmsm_mpm_bypassed_apps_irqs list:\n1. 234 \u003d RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ\n2. 235 \u003d RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "1517952281fed674b9d0e4e614a2e3d296fc6eba", "tree": "2de85199059dc7832decf2f5afd218032b8d367b", "parents": [ "edee2d3cc6a4f0b9fccccd3d0fdf6452d1f14ba1" ], "author": { "name": "Marc Zyngier", "email": "marc.zyngier@arm.com", "time": "Tue Sep 27 18:56:26 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:07 2011 -0700" }, "message": "ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive\n\nEven when CONFIG_MULTI_IRQ_HANDLER is selected, the core code\nrequires the arch_irq_handler_default macro to be defined as\na fallback.\n\nIt turns out nobody is using that particular feature as both PXA\nand shmobile have all their machine descriptors populated with\nthe interrupt handler, leaving unused code (or empty macros) in\ntheir entry-macro.S file just to be able to compile entry-armv.S.\n\nMake CONFIG_MULTI_IRQ_HANDLER exclusive wrt arch_irq_handler_default,\nwhich allows to remove one test from the hot path. Also cleanup both\nPXA and shmobile entry-macro.S.\n\nCc: Eric Miao \u003ceric.y.miao@gmail.com\u003e\nCc: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: Marc Zyngier \u003cmarc.zyngier@arm.com\u003e\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\n" }, { "commit": "edee2d3cc6a4f0b9fccccd3d0fdf6452d1f14ba1", "tree": "f73e433d9b53d398572737d24142389b2e779598", "parents": [ "357c24cfe03791aa9fedfa4a2a8d135b0ea6ac3f" ], "author": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sun Jun 26 10:34:02 2011 +0100" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:06 2011 -0700" }, "message": "ARM: entry: re-allocate registers in irq entry assembly macros\n\nThis avoids the irq entry assembly corrupting r5, thereby allowing it\nto be preserved through to the svc exit code.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\n" }, { "commit": "357c24cfe03791aa9fedfa4a2a8d135b0ea6ac3f", "tree": "614b50d683f95bc9dad29455f90830c2b808d333", "parents": [ "aff429ae7d2d1b272d98935907ddfbf43ff4aaeb" ], "author": { "name": "Russell King - ARM Linux", "email": "linux@arm.linux.org.uk", "time": "Mon Jul 11 22:25:43 2011 +0100" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:06 2011 -0700" }, "message": "ARM: introduce handle_IRQ() not to dump exception stack\n\nOn Mon, Jul 11, 2011 at 3:52 PM, Russell King - ARM Linux\n\u003clinux@arm.linux.org.uk\u003e wrote:\n\n...\n\n\u003e The __exception annotation on a function causes this to happen:\n\u003e\n\u003e [\u003cc002406c\u003e] (asm_do_IRQ+0x6c/0x8c) from [\u003cc0024b84\u003e]\n\u003e (__irq_svc+0x44/0xcc)\n\u003e Exception stack(0xc3897c78 to 0xc3897cc0)\n\u003e 7c60:\n\t 4022d320 4022e000\n\u003e 7c80: 08000075 00001000 c32273c0 c03ce1c0 c2b49b78 4022d000\n\tc2b420b4 00000001\n\u003e 7ca0: 00000000 c3897cfc 00000000 c3897cc0 c00afc54 c002edd8\n\t00000013 ffffffff\n\u003e\n\u003e Where that stack dump represents the pt_regs for the exception which\n\u003e happened. Any function found in while unwinding will cause this to\n\u003e be printed.\n\u003e\n\u003e If you insert a C function between the IRQ assembly and asm_do_IRQ,\n\u003e the\n\u003e dump you get from asm_do_IRQ will be the stack for your function,\n\u003e not\n\u003e the pt_regs. That makes the feature useless.\n\u003e\n\nWhen __irq_svc - or any of the other exception handling assembly code -\ncalls the C code, the stack pointer will be pointing at the pt_regs\nstructure.\n\nAll the entry points into C code from the exception handling code are\nmarked with __exception or __exception_irq_enter to indicate that they\nare one of the functions which has pt_regs above them.\n\nNormally, when you\u0027ve entered asm_do_IRQ() you will have this stack\nlayout (higher address towards top):\n\n pt_regs\n asm_do_IRQ frame\n\nIf you insert a C function between the exception assembly code and\nasm_do_IRQ, you end up with this stack layout instead:\n\n pt_regs\n your function frame\n asm_do_IRQ frame\n\nThis means when we unwind, we\u0027ll get to asm_do_IRQ, and rather than\ndumping out the pt_regs, we\u0027ll dump out your functions stack frame\ninstead, because that\u0027s what is above the asm_do_IRQ stack frame\nrather than the expected pt_regs structure.\n\nThe fix is to introduce handle_IRQ() for no exception stack dump, so\nit can be called with MULTI_IRQ_HANDLER is selected and a C function\nis between the assembly code and the actual IRQ handling code.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nSigned-off-by: Eric Miao \u003ceric.y.miao@gmail.com\u003e\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\n" }, { "commit": "9c8cdc9f0169c188c5f779edf65a270431483dff", "tree": "241d4796e880345024a3f1931b33cfecb33251b3", "parents": [ "b14886b07425bfe1703991ff844c2bbd10f1d227" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Mon Sep 12 14:11:30 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:03 2011 -0700" }, "message": "msm: Refactor msm_rpm_device into devices file\n\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "b14886b07425bfe1703991ff844c2bbd10f1d227", "tree": "f61242869b11f412f319e1fb69af0ed47f8154f5", "parents": [ "1a7a787fbe0be8dc854d82ac264a1ec0f450125f" ], "author": { "name": "Jeff Johnson", "email": "jjohnson@codeaurora.org", "time": "Fri Sep 30 08:28:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:02 2011 -0700" }, "message": "wcnss: Rename the module from wcnsswlan to wcnsscore\n\nRename the module produced for the wcnss subsystem to reflect the fact\nthat it provides core services, and not just services for WLAN\n\nSigned-off-by: Jeff Johnson \u003cjjohnson@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/net/wireless/Makefile\n" }, { "commit": "1a7a787fbe0be8dc854d82ac264a1ec0f450125f", "tree": "99ad6f0189cb42fff16670118db5487c59653f95", "parents": [ "e3673dac41dcba55ed4b511dcd52e8f074a570f3" ], "author": { "name": "Niranjan Pendharkar", "email": "npendhar@codeaurora.org", "time": "Thu Sep 29 11:24:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:01 2011 -0700" }, "message": "defconfig: enable CONFIG_IP_ADVANCED_ROUTER\n\nenabled IP multiple table support for 8960\n\nCRs-fixed: 309307\nSigned-off-by: Niranjan Pendharkar \u003cnpendhar@codeaurora.org\u003e\n" }, { "commit": "00f766d67dda08e5b87a55561547740b16630ce8", "tree": "d00122afe5c3324c60f5cac4257be4e07b1ca7dd", "parents": [ "d2d86b58a6331b9817da3cb3247a93aaccab41b5" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Thu Sep 29 15:35:55 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:00 2011 -0700" }, "message": "msm: lpass-8960: Panic for cases where subsystem restart won\u0027t work\n\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "059e09146696ee39c3c8e97df74eec36432cfecc", "tree": "57e33c8b5260bedfe0d255ef6b57b1a3b67cde6a", "parents": [ "ca2a044be4b8f04fa2488ab4065cb82bb734ec52" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Thu Sep 29 12:56:39 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:13:58 2011 -0700" }, "message": "msm: spm-v2: Fix subscript above array bounds error\n\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "ca2a044be4b8f04fa2488ab4065cb82bb734ec52", "tree": "0d5e55565d44a589780ef7fbc4dc97bab021527a", "parents": [ "f29e818b738b421a72aa6869cd90caa741d33845" ], "author": { "name": "Zhoulu Luo", "email": "zluo@codeaurora.org", "time": "Fri Sep 30 18:32:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:13:58 2011 -0700" }, "message": "Revert \"msm: don\u0027t map hole at top of the first memory bank on 8960\"\n\nSigned-off-by: Zhoulu Luo \u003czluo@codeaurora.org\u003e\n" } ], "next": "f29e818b738b421a72aa6869cd90caa741d33845" }