)]}' { "log": [ { "commit": "145b75e9aedbe36c55e45da8564dcd0814bdd89e", "tree": "2bf27bb6657b28d12404de416276bca1c2ba52a4", "parents": [ "2624565caacedd740fce7803fe2c162842aa5df4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: initialize rq-\u003ecmd_type in ide_init_drive_cmd() callers\n\n* Initialize rq-\u003ecmd_type in ide_wait_cmd(), ide_cmd_ioctl() and\n set_pio_mode() (other callers were aleady over-riding rq-\u003ecmd_type).\n\n* Remove no longer needed rq-\u003ecmd_type setup from ide_init_drive_cmd().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2624565caacedd740fce7803fe2c162842aa5df4", "tree": "fe177bad8d72bfefa138a3abd7f8c7b92f549169", "parents": [ "4906f3b4cddc3e4d62955ed386598561f95602c0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)\n\nUse wait_drive_not_busy() in drive_cmd_intr().\n\nv2:\n* Fix wait_drive_not_busy() comment (noticed by Sergei).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4906f3b4cddc3e4d62955ed386598561f95602c0", "tree": "fcf2ef00e2d6625ae521a83d101a3c7a92ae5c6a", "parents": [ "4d7a984bdcbdda69fc6b2a4a655415140270aa7b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: kill DATA_READY define\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4d7a984bdcbdda69fc6b2a4a655415140270aa7b", "tree": "92d331aa25949277fe76354dfdaf5a5d6e62aaf4", "parents": [ "79f21b84d94c02b941818df282b61f2a5a028722" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: task_end_request() fix\n\ntask_end_request() modified to always call ide_end_drive_cmd()\nfor taskfile requests. Previously, ide_end_drive_cmd() was\ncalled only when IDE_TFLAG_FLAGGED was set. Also,\nide_dma_intr() is modified to use task_end_request().\n\nEnables TASKFILE ioctls to get valid register outputs on\nsuccessful completion.\n\nBart:\n- ported it over recent IDE changes\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "79f21b84d94c02b941818df282b61f2a5a028722", "tree": "7c3dce7b18e85fb6bcae570dcdcdf94591b20c65", "parents": [ "03c3c70ee541c91250e2bff57211d403cb0b7055" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: use rq-\u003enr_sectors in task_end_request()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "03c3c70ee541c91250e2bff57211d403cb0b7055", "tree": "04858454e3239cad800f5777a054f29cf4f4c3e3", "parents": [ "657cc1a8f6cd6a9e2974cba3af9fccd8c25e06ad" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: remove needless -\u003ecursg clearing from task_end_request()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "657cc1a8f6cd6a9e2974cba3af9fccd8c25e06ad", "tree": "4f1542ec2738993193ac4c02cba78aa4ed981f80", "parents": [ "3687221f28058c40e2c57a286decd0caeac67382" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "message": "ide: set IDE_TFLAG_IN_* flags before queuing/executing command\n\n* Add IDE_TFLAG_{HOB,TF,DEVICE} defines.\n\n* Set IDE_TFLAG_IN_* flags in {do_rw,ide_no_data,ide_raw}_taskfile() users.\n\n* Remove no longer needed -\u003etf_flags setup from ide_end_drive_cmd().\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3687221f28058c40e2c57a286decd0caeac67382", "tree": "999375245bdb58760d5c94a5457c5697523b2c66", "parents": [ "73d7de0c818639cf74a32ce3b13a33021414749c" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "message": "ide-tape: fix handling of non-special requests in -\u003eend_request method\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "73d7de0c818639cf74a32ce3b13a33021414749c", "tree": "1c120cd06b72b80a21643ee08e42ac37d21a7d57", "parents": [ "49c746ee6cc791202172483277a249c12ba437d8" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "message": "ide: fix final status check in task_in_intr()\n\nCheck for DRQ bit being cleared on the final status check.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "49c746ee6cc791202172483277a249c12ba437d8", "tree": "db6e95d642c571712e9806396b23279ecb992b21", "parents": [ "35cf2b94d0ecb7034cfa05dd725721538bbb83fc" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "message": "ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()\n\nide_dump_status() may set HOB bit before ide_end_drive_cmd() is called.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "35cf2b94d0ecb7034cfa05dd725721538bbb83fc", "tree": "6c3681f06b078626aeeb8de1e28bbdd458f95c70", "parents": [ "63c4467805c9b23231d8bc9b61305b2013f9fea2" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "message": "ide: fix -\u003eio_32bit race in ide_taskfile_ioctl()\n\nIn ide_taskfile_ioctl(), there was a race condition involving\ndrive-\u003eio_32bit. It was cleared and restored during ioctl\nrequests but there was no synchronization with other requests.\nSo, other requests could execute with the altered -\u003eio_32bit\nsetting or updated drive-\u003eio_32bit could be overwritten by\nide_taskfile_ioctl().\n\nThis patch adds IDE_TFLAG_IO_16BIT flag to indicate to\nide_pio_datablock() that 16-bit I/O is needed regardless of\ndrive-\u003eio_32bit settting.\n\nBart:\n- ported it over recent IDE changes\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "63c4467805c9b23231d8bc9b61305b2013f9fea2", "tree": "15fa34011f57ff4fb473a18bc817839988398be0", "parents": [ "9e47be0c97f7357b80e91dc0632e9cce2eb025e0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "message": "cmd64x: remove /proc/ide/cmd64x\n\nThis belongs to user-space (and only if really needed).\n\n text data bss dec hex filename\n 3874 180 28 4082 ff2 drivers/ide/pci/cmd64x.o.before\n 2231 180 0 2411 96b drivers/ide/pci/cmd64x.o.after\n\nAdditionaly to being bloat the code reported incorrect UDMA modes for\nthe reserved values of UDIDETCR0/1 registers.\n\nAlso while at it remove unused CNTRL_DIS_RA0/1 defines.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9e47be0c97f7357b80e91dc0632e9cce2eb025e0", "tree": "7047b2b3c9ac094b801d376e4bbb95292b1962ac", "parents": [ "3a5015cc9d7051ce8e706ef48276d8484aac0c4b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "message": "ide: remove broken disk byte-swapping support\n\nRemove broken disk byte-swapping support:\n- it can cause a data corruption on SMP (or if using PREEMPT on UP)\n- all data coming from disk are byte-swapped by taskfile_*_data() which\n results in incorrect identify data being reported by /proc/ide/ and IOCTLs\n- \"hdx\u003dbswap/byteswap\" kernel parameter has been broken on m68k host drivers\n (including Atari/Q40 ones) since 2.5.x days (because of \u0027hwif\u0027 zero-ing)\n- byte-swapping is limited to PIO transfers (for working with TiVo disks on\n x86 machines using user-space solutions or dm-byteswap should result in\n much better performance because DMA can be used)\n\nFor previous discussions please see:\n\nhttp://www.ussg.iu.edu/hypermail/linux/kernel/0201.0/0768.html\nhttp://lkml.org/lkml/2004/2/28/111\n\n[ I have dm-byteswap device mapper target if somebody is interested\n (patch is for 2.6.4 though but I\u0027ll dust it off if needed). ]\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3a5015cc9d7051ce8e706ef48276d8484aac0c4b", "tree": "44c983552fb651a887a0276fdd8cc309376f2bfd", "parents": [ "ce71ed9ba8b558d54c213d372a6cf8b302fa1fa4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "message": "ide: add ide_busy_sleep() helper\n\nAdd ide_busy_sleep() helper and use it in do_probe(),\nenable_nest() and probe_hwif().\n\nAs a nice side-effect this fixes a minor bug in do_probe()\n(the code was reading status register without any delay).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ce71ed9ba8b558d54c213d372a6cf8b302fa1fa4", "tree": "4ae0f412da86203e7d06f18d3f3091956c016235", "parents": [ "9ac59226ca95889ad620b0e63c0f700679fee5dd" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "message": "ide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate it\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9ac59226ca95889ad620b0e63c0f700679fee5dd", "tree": "54771bd08c565fba88e1257482f7cfb32de747ef", "parents": [ "c99c92c58757985096e2d195dc1631246d99d686" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "message": "ide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.c\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c99c92c58757985096e2d195dc1631246d99d686", "tree": "c1663bd62c4fbc8ebf6020ea189c74a9c5523be6", "parents": [ "81ca691981da718727281238b435dcf1528d2fda" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "message": "ide: print banner message once per controller in m68k host drivers\n\n* Print banner message once per controller in m68k host drivers.\n\n* Change printk() level to KERN_INFO in buddha, falconide and gayle.\n\n* Add banner message to q40ide.\n\nThis is basically a preparation for the future IDE layer changes.\n\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "81ca691981da718727281238b435dcf1528d2fda", "tree": "4c4845a77d94fe91bd7d1345bf9d992852b8d572", "parents": [ "4f52a32994f9e05fb8ae1a9ba3f20cd0b55145b7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "message": "ide: add ide_set_irq() inline helper\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4f52a32994f9e05fb8ae1a9ba3f20cd0b55145b7", "tree": "32daca85380f3448c0370dd651cca724877938a2", "parents": [ "ce635f605e52a0d47aea5313ba406ada20e6028a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "message": "ide-pmac: use custom hwif-\u003esg_max_nents only if DMA support is enabled\n\nMove setting hwif-\u003esg_max_nents from pmac_ide_setup_device()\nto pmac_ide_setup_dma().\n\nAcked-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ce635f605e52a0d47aea5313ba406ada20e6028a", "tree": "b2389cbc356833d3881d35f94ab6fe783f0b3418", "parents": [ "79127c37aa5d959c9ace40a869386f712b55ac6d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "message": "rapide: remove write-only hwif-\u003ehwif_data\n\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "79127c37aa5d959c9ace40a869386f712b55ac6d", "tree": "7de0d451e8b57abb246b9501c536011e7c317f15", "parents": [ "6828fc9a919b06723599192300053ddf6f638c95" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "message": "ide: use ide_init_port_hw() in setup-pci.c\n\n* Move setting hwif-\u003egendev.parent from ide_pci_setup_ports()\n to ide_hwif_configure().\n\n* Always set hwif-\u003eio_ports in ide_hwif_configure().\n\n* Use ide_init_port_hw() in ide_hwif_configure().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6828fc9a919b06723599192300053ddf6f638c95", "tree": "b06443c358fce7c7cd1fb06a2c9007bf5129e04c", "parents": [ "aa79a2faa01ded0a6a4929dd37c059bef4890838" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "message": "ide: always use ide_std_init_ports() in setup-pci.c\n\n* ide_init_hwif_ports() call in setup-pci.c::ide_hwif_configure()\n doesn\u0027t depend on the default cotrol register offset, default IRQ\n or ppc_ide_md.ide_init_hwif implementations so ide_std_init_ports()\n can always be used.\n\n* Since \u0027base\u0027 is always non-zero and thus hwif-\u003eio_ports[IDE_DATA_OFFSET]\n is also non-zero always clear hwif-\u003enoprobe.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aa79a2faa01ded0a6a4929dd37c059bef4890838", "tree": "aa15fab9129e68e930e2b29380526e3a4ed2ed67", "parents": [ "a42bcc0f2fc380fac81a7ac525a70bbef44bb042" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "message": "au1xxx-ide: use ide_init_port_hw()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a42bcc0f2fc380fac81a7ac525a70bbef44bb042", "tree": "e8bef797324b4e9faa8a3dd54ada8249bd718817", "parents": [ "ade2daf9c6e57845fe83a24e0a9fa1c03c6e91b1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "message": "au1xxx-ide: au_ide_probe() fixes\n\n* hwif-\u003ehold is always set in au_ide_probe() (few lines earlier),\n no need to set it again\n\n* hwif-\u003e{channel,select_data,config_data} should be always zero\n\n* autotune PIO also if CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is defined\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ade2daf9c6e57845fe83a24e0a9fa1c03c6e91b1", "tree": "68070062d6306442caee50630c4213c911eb9064", "parents": [ "8ac4ce742c66100931b6f2d7a36b0df08bc721fe" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "message": "ide: make remaining built-in only IDE host drivers modular (take 2)\n\n* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c\n file for probing PCI host drivers registered with IDE core (special case\n for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER\u003dy) and then take care of\n the ordering in which all IDE host drivers are probed when IDE is built-in\n during link time.\n\n* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch\n specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris\n arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).\n\n* Move probing of ide-cris (cris arch specific) host driver before cmd640\n (x86 arch specific).\n\n* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends\n on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300\n (h8300 arch specific).\n\n* Add \"probe_vlb\" kernel parameter to cmd640 host driver and update\n Documentation/ide.txt accordingly.\n\n* Make IDE_ARM config option visible so it can also be disabled if needed.\n\n* Remove bogus comment from ide.c while at it.\n\nv2:\n* Fix two issues spotted by Sergei:\n - replace ENOMEM error value by ENOENT in ide-h8300 host driver\n - fix MODULE_PARM_DESC() in cmd640 host driver\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8ac4ce742c66100931b6f2d7a36b0df08bc721fe", "tree": "bc44edb8d6ec9057d24aa4c986729e1ca9f3f860", "parents": [ "ac87e41116c229fc1efaac0d17fdbfb2185e4629" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "ide: fix host drivers depending on ide_generic to probe for interfaces (take 2)\n\n* Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs().\n\n* Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle,\n macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add().\n\n This removes dependency on ide_generic for these drivers so update\n ide/Kconfig accordingly.\n\nv2:\n* ide_arm build fix (s/ide_device_idx/ide_device_add/)\n (Thanks to Christoph Lameter \u003cclameter@sgi.com\u003e for reporting the problem).\n\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ac87e41116c229fc1efaac0d17fdbfb2185e4629", "tree": "527e0060d2c986a6233cf2a4d8334e00af7d3b22", "parents": [ "944000921d41c5aacfda6515ad3a0bbde52f8fa3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "cmd640: fix dependency on IDE_GENERIC\n\nMake BLK_DEV_CMD640 select IDE_GENERIC.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "944000921d41c5aacfda6515ad3a0bbde52f8fa3", "tree": "a2f814052f6a310fb9f36d80c2905c2838f0d275", "parents": [ "cbb010c180294a5242a7681555c28737d9dd26ab" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "ide: move ide_arm_init() call from init_ide_data() to ide_init()\n\n* Remove ide_init_port_data() call from ide_arm_init() and move\n ide_arm_init() call from init_ide_data() to ide_init().\n\nThis patch is a preparation for the future changes (and as a side-effect\nmakes obsolete \"idex\u003dio[,ctl[,irq]]\" kernel parameters work for ide_arm).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cbb010c180294a5242a7681555c28737d9dd26ab", "tree": "073883d1dc672bb38021563ca0d9cd762cd5abf2", "parents": [ "57c802e84f9c759c3d1794a9dbe81bc10444df62" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "ide: drop \u0027initializing\u0027 argument from ide_register_hw()\n\n* Rename init_hwif_data() to ide_init_port_data() and export it.\n\n* For all users of ide_register_hw() with \u0027initializing\u0027 argument set\n hwif-\u003epresent and hwif-\u003ehold are always zero so convert these host\n drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw()\n instead (also no need for init_hwif_default() call since the setup\n done by it gets over-ridden by ide_init_port_hw() call).\n\n* Drop \u0027initializing\u0027 argument from ide_register_hw().\n\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "57c802e84f9c759c3d1794a9dbe81bc10444df62", "tree": "e8774704b3394b12efbb787022cc11b48a13dec0", "parents": [ "8f8e8483f667d79739007b25f0e59a540fb9fa51" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "message": "ide: add ide_init_port_hw() helper\n\n* Add ide_init_port_hw() helper.\n\n* rapide.c: convert rapide_locate_hwif() to rapide_setup_ports()\n and use ide_init_port_hw().\n\n* ide_platform.c: convert plat_ide_locate_hwif() to plat_ide_setup_ports()\n and use ide_init_port_hw().\n\n* sgiioc4.c: use ide_init_port_hw().\n\n* pmac.c: add \u0027hw_regs_t *hw\u0027 argument to pmac_ide_setup_device(),\n setup \u0027hw\u0027 in pmac_ide_{macio,pci}_attach() and use ide_init_port_hw()\n in pmac_ide_setup_device().\n\nThis patch is a preparation for the future changes in the IDE probing code.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nCc: Jeremy Higdon \u003cjeremy@sgi.com\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8f8e8483f667d79739007b25f0e59a540fb9fa51", "tree": "a125d30e0b3d86c70ddd44cd48496423b336c613", "parents": [ "b0d5bc27ce995adaafbc114b92fa76815025c94e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "message": "sgiioc4: always init hwif-\u003eio_ports\n\n\u0027if (hwif-\u003eio_ports[IDE_DATA_OFFSET] !\u003d cmd_base)\u0027 is always true.\n\nCc: Jeremy Higdon \u003cjeremy@sgi.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b0d5bc27ce995adaafbc114b92fa76815025c94e", "tree": "ee3cd3336be0cbb32b9b823bac0a051c0e531c04", "parents": [ "151575e4644f917d3a9f83c777ac3543284954f8" ], "author": { "name": "Olof Johansson", "email": "olof@lixom.net", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "message": "ide: Fix build break caused by \"ide: remove ideprobe_init()\"\n\nFix build break of powerpc holly_defconfig:\n\nIn file included from arch/powerpc/platforms/embedded6xx/holly.c:24:\ninclude/linux/ide.h:1206: error: \u0027CONFIG_IDE_MAX_HWIFS\u0027 undeclared here (not in a function)\n\nThere\u0027s no need to have a sized array in the prototype, might as well\nturn it into a pointer.\n\nIt could probably be argued that large parts of the include file can be\ncovered under #ifdef CONFIG_IDE, but that\u0027s a larger undertaking.\n\nSigned-off-by: Olof Johansson \u003colof@lixom.net\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "151575e4644f917d3a9f83c777ac3543284954f8", "tree": "766f73e934b270972b5875cc36cbc98e2e3b7469", "parents": [ "71518342bfdfbe508ee325ab5e20984ba2da7de2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "message": "ide: remove ideprobe_init()\n\n* Rename ide_device_add() to ide_device_add_all() and make it accept\n \u0027u8 idx[MAX_HWIFS]\u0027 instead of \u0027u8 idx[4]\u0027 as an argument.\n\n* Add ide_device_add() wrapper for ide_device_add_all().\n\n* Convert ide_generic_init() to use ide_device_add_all().\n\n* Remove no longer needed ideprobe_init().\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "71518342bfdfbe508ee325ab5e20984ba2da7de2", "tree": "436adf2e36cb4c41f5edab1bab1a3d67fd182688", "parents": [ "aae73b4ed721912dbd4909ae5f618080c64594de" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "message": "ide: add hwif-\u003echipset fixup to ide_device_add()\n\nAdd hwif-\u003echipset fixup identical to the one in ideprobe_init()\nto ide_device_add().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aae73b4ed721912dbd4909ae5f618080c64594de", "tree": "a63777e8fd37bd114c4b209cdf8e57a252a11c58", "parents": [ "23d8e72c3a813f2121878120bc49de2cd390119b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "message": "swarm: set hwif-\u003echipset\n\nhwif-\u003echipset should be set if the hwif is claimed by host driver.\n\nCc: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "23d8e72c3a813f2121878120bc49de2cd390119b", "tree": "9dd37789fdb067475609aa7dde03793dddac50d3", "parents": [ "2e13093a834ddbbf92701d477e69c9018959a82c" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "message": "rapide: set hwif-\u003echipset\n\nhwif-\u003echipset should be set if the hwif is claimed by host driver.\n\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2e13093a834ddbbf92701d477e69c9018959a82c", "tree": "e21987d2548594fef87b809da462088acad7c58a", "parents": [ "ba6560aa45fc498125b07130784ec5ca8a6922a6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "message": "ide: fix probing for hosts with serialized or IRQ sharing interfaces\n\nAfter hwif_register_devices() IDE devices are ready to be used so\nthe way in which ide_device_add() works currently is racy for hosts\nwith serialized / IRQ sharing interfaces.\n\nFix ide_device_add() by looping over interfaces for probe_hwif(),\nhwif_init() and hwif_register_devices() operations.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ba6560aa45fc498125b07130784ec5ca8a6922a6", "tree": "1ea529ba8ccba7c54890e499913ad3d700e04f29", "parents": [ "795d74b51a853e1f5f2c81baf6666836a3866f08" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:04 2008 +0100" }, "message": "ide: kill probe_hwif_init()\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "795d74b51a853e1f5f2c81baf6666836a3866f08", "tree": "85e83e27ea864be51959774f8a3a00dae814a5e6", "parents": [ "f01393e48c44e30f7c9a36c8b98a07b0232580fe" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: don\u0027t try to unregister interfaces if \u0027initializing\u0027 in ide_register_hw()\n\nHost drivers using ide_register_hw() and \u0027initializing \u003d\u003d 1\u0027:\n\n* ide-pnp\n - depends on ISA\n\n* ide_arm \n - ARM arch specific\n - initialized before all other host drivers\n\n* ide-cris\n - CRIS arch specific \u003d\u003e IDE_ARCH_OBSOLETE_INIT is not defined\n - broken\n\n* ide-h8300\n - H8300 arch specific \u003d\u003e IDE_ARCH_OBSOLETE_INIT is not defined, no PCI\n\n* buddha/q40/gayle/macide/falconide\n - M68K arch specific \u003d\u003e IDE_ARCH_OBSOLETE_INIT is not defined, no PCI\n\nSince the only host drivers which probe interfaces before the above ones are:\n\n* ali14xx/dtc2278/ht6560b/qd65xx/umc8672\n - depend on ISA\n - require IDE_ARCH_OBSOLETE_INIT\u003dy to work\n\n* PCI ones\n - depend on PCI\n\ndon\u0027t try to unregister interfaces if \u0027initializing \u003d\u003d 1\u0027 in ide_register_hw()\n(it is possible that built-in host drivers will claim all IDE interfaces but\nlater ide-pnp host driver will try to unregister them - this change fixes it).\n\nAlso skip hwif-\u003ehold check if \u0027initializing \u003d\u003d 1\u0027 since it is set only by:\n\n* pmac\n - PPC \u0026\u0026 PMAC specific \u003d\u003e no ISA\n\n* au1xxx-ide\n - MIPS \u0026\u0026 SOC_AU1200 specific \u003d\u003e no ISA\n\nand use ide_find_port() helper to find free ide_hwifs[] slot.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f01393e48c44e30f7c9a36c8b98a07b0232580fe", "tree": "d585310ef7ee6509285a96b849af2e544e5fea25", "parents": [ "6dd9b8376adbee95ddc321cc83c7f641577e01f6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: merge -\u003efixup and -\u003equirkproc methods\n\n* Assign drive-\u003equirk_list in -\u003equirkproc implementations:\n - hpt366.c::hpt3xx_quirkproc()\n - pdc202xx_new.c::pdcnew_quirkproc()\n - pdc202xx_old.c::pdc202xx_quirkproc()\n\n* Make -\u003equirkproc void.\n\n* Move calling -\u003equirkproc from do_identify() to probe_hwif().\n\n* Convert it821x_fixups() to it821x_quirkproc() in it821x.c.\n\n* Convert siimage_fixup() to sil_quirkproc() in siimage.c, also remove\n no longer needed drive-\u003epresent check from is_dev_seagate_sata().\n\n* Convert ide_undecoded_slave() to accept \u0027drive\u0027 instead of \u0027hwif\u0027\n as an argument. Then convert ide_register_hw() to accept \u0027quirkproc\u0027\n argument instead of \u0027fixup\u0027 one.\n\n* Remove no longer needed -\u003efixup method.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6dd9b8376adbee95ddc321cc83c7f641577e01f6", "tree": "5f7bfc8d16f63c0623368f48a898e969cd99680e", "parents": [ "15ce926ada545cb078711bd9a18c083c93fa01d7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined)\n\n* Dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined).\n\n* Remove no longer needed DEBUG code from __ide_do_rw_disk().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "15ce926ada545cb078711bd9a18c083c93fa01d7", "tree": "9496cda87cae6ef3390c5f350741ad75418dfe8d", "parents": [ "f37aaf9edeba3f4ae10d22aefc09c06af9ea39b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: merge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\n\nMerge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\nwhich takes \u0027int on\u0027 argument.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f37aaf9edeba3f4ae10d22aefc09c06af9ea39b6", "tree": "167b73d875f3f5c36e9c4378d6e499cf08a46205", "parents": [ "8ae60e34dd737ed3bef64b08130478393d9c4e8a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:02 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:02 2008 +0100" }, "message": "ide: move drive-\u003eusing_dma check to callers of -\u003edma_host_on method\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8ae60e34dd737ed3bef64b08130478393d9c4e8a", "tree": "be8399b40123a831f0fe0a00647f0db4afc967a7", "parents": [ "07a085ebd35ba0d4e2d88b9044563661dbca2471" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:02 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:02 2008 +0100" }, "message": "atiixp: remove -\u003edma_host_on and -\u003edma_host_off methods\n\n* Enable/disable UDMA in atiixp_set_dma_mode().\n\n* Remove no longer needed atiixp_dma_host_{on,off}() and save_mdma_mode[].\n\n* Bump driver version.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "07a085ebd35ba0d4e2d88b9044563661dbca2471", "tree": "9e401b547877850ba56117a37be3a270beb25db3", "parents": [ "4a546e046d562bcd389149591fa5a534c8f832ca" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "message": "ide-cris: fix DMA methods\n\n* Rename cris_dma_{on,off}() to cris_dma_host_{on,off}().\n\n* Remove no longer needed -\u003edma_off_quietly\n (IDE core has the needed code now).\n\n* Make cris_dma_host_on() void.\n\nI left fixing ide-cris after \"kill dma_on/dma_off_quietly() methods\"\npatch because:\n\n* Currently this driver is broken: cris_dma_on() (returns \u0027int\u0027)\n is assigned to hwif-\u003edma_host_on (returns \u0027void\u0027) so the driver\n won\u0027t build.\n\n* -\u003eide_dma_on method was missing so the driver OOPS-es on attempt\n to enable DMA.\n\n* drive-\u003eusing_dma was never set/cleared so DMA wouldn\u0027t be used anyway.\n\nUnfortunately it seems that ide-cris stays broken even after this patch:\n\n* V10: \u003casm/arch-v10/ide.h\u003e needs fixing\n - ide_init_default_hwifs() should be removed\n (IDE core no longer uses it)\n - same for ide_init_hwif_ports() and ide_default_{irq,io_base}()\n (they shouldn\u0027t be needed for ide-cris host driver)\n\n* V32: I\u0027m unable to find a place which defines ETRAX_ARCH_V32\n\nbut I\u0027m leaving fixing this to CRIS gurus. :)\n\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4a546e046d562bcd389149591fa5a534c8f832ca", "tree": "ffc5c7bd088a0bf74744721b9cfcf18220a75fdf", "parents": [ "378f577f7f75aa18a0eeafb044a491dcd5aeaa3d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "message": "ide: remove -\u003eide_dma_on and -\u003edma_off_quietly methods from ide_hwif_t\n\n* Make ide_dma_off_quietly() and __ide_dma_on() always available.\n\n* Drop \"__\" prefix from __ide_dma_on().\n\n* Check for presence of -\u003edma_host_on instead of -\u003eide_dma_on.\n\n* Convert all users of -\u003eide_dma_on and -\u003edma_off_quietly methods\n to use ide_dma_on() and ide_dma_off_quietly() instead.\n\n* Remove no longer needed -\u003eide_dma_on and -\u003edma_off_quietly methods\n from ide_hwif_t.\n\n* Make ide_dma_on() void.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "378f577f7f75aa18a0eeafb044a491dcd5aeaa3d", "tree": "2faa35413496b64b97c9c31e2fc0952237d533b0", "parents": [ "c58096941284ceaea504b2f8c4d146f0f7c86b49" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "message": "au1xxx-ide: add ide_toggle_bounce() calls\n\nAdd ide_toggle_bounce() call to -\u003eide_dma_on/-\u003edma_off_quietly\nmethods so they match generic __ide_dma_on()/ide_dma_off_quietly().\n\nSince there is no PCI device there should be no functionality\nchanges caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c58096941284ceaea504b2f8c4d146f0f7c86b49", "tree": "779e16bf7e2e74319cbdcf2b9e4e809501b2f391", "parents": [ "e5efba33289574a08674f7613eb0513bcb44d085" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "message": "icside: add ide_toggle_bounce() calls\n\nAdd ide_toggle_bounce() call to -\u003eide_dma_on/-\u003edma_off_quietly\nmethods so they match generic __ide_dma_on()/ide_dma_off_quietly().\n\nSince there is no PCI device there should be no functionality\nchanges caused by this patch.\n\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e5efba33289574a08674f7613eb0513bcb44d085", "tree": "1d22537ae68de7bd081c45ef9f37181812a2d028", "parents": [ "8704de8f296fcf6a4b2ff6bfd9a63974ad909b3e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "message": "sgiioc4: add ide_toggle_bounce() calls\n\nAdd ide_toggle_bounce() call to -\u003eide_dma_on/-\u003edma_off_quietly\nmethods so they match generic __ide_dma_on()/ide_dma_off_quietly().\n\nTested on Altix by Jeremy.\n\nAcked-by: Jeremy Higdon \u003cjeremy@sgi.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8704de8f296fcf6a4b2ff6bfd9a63974ad909b3e", "tree": "386dccd98e7fc77b0c6b45b999bf474c04851165", "parents": [ "a530201afed5074dac69b29c519a1df59da97945" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "message": "cy82c693: add -\u003eset_dma_mode method\n\n* Fix SWDMA/MWDMA masks in cy82c693_chipset.\n\n* Add IDE_HFLAG_CY82C693 host flag and use it in ide_tune_dma() to\n check whether the DMA should be enabled even if ide_max_dma_mode()\n fails.\n\n* Convert cy82c693_dma_enable() to become cy82c693_set_dma_mode()\n and remove no longer needed cy82c693_ide_dma_on(). Then set\n IDE_HFLAG_CY82C693 instead of IDE_HFLAG_TRUST_BIOS_FOR_DMA in\n cy82c693_chipset.\n\n* Bump driver version.\n\nAs a result of this patch cy82c693 driver will configure and use DMA on\nall SWDMA0-2 and MWDMA0-2 capable ATA devices instead of relying on BIOS.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a530201afed5074dac69b29c519a1df59da97945", "tree": "db757157f6474910d1cde484f289d80c4e61dbc8", "parents": [ "aea5d375600f132537adf45942c0fbdcd25eb995" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "message": "cy82c693: correct DMA modes clipping\n\n* Mask device DMA masks by ATA_{S,M}WDMA2 in cy82c693_ide_dma_on().\n\n* Remove clipping of DMA modes by id-\u003etDMA in cy82c693_dma_enable():\n - id-\u003etDMA may not be defined on newer devices\n - id-\u003evendor6/id-\u003etDMA word is in LE endianness\n (cy82c693 seems to be Alpha specific though)\n\n* Bump driver version.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aea5d375600f132537adf45942c0fbdcd25eb995", "tree": "6226c25e9024a35755d193440e6e03ab27eef066", "parents": [ "29ec683f019608ca0cb6cf69011426ecb5daa69e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "message": "ide: (hopefully) fix VDMA for CS5520\n\n* Set the correct hwif-\u003edma_base for the second channel in\n ide_get_or_set_dma_base().\n\n* Remove DMA enable code from cs5520_set_pio_mode(), this can\n be handled by the generic -\u003edma_host_on method now.\n\n* Add VDMA check to ide_config_drive_speed().\n\n* drive-\u003eusing_dma was never enabled since cs5520 host driver\u0027s\n -\u003eide_dma_on method overrided the generic -\u003eide_dma_on (so\n __ide_dma_on() was never called, drive-\u003eusing_dma was never set\n and VDMA was never used since it depends on drive-\u003eusing_dma).\n\n Fix it by using -\u003edma_host_on method instead of -\u003eide_dma_on\n (also add matching -\u003edma_host_off method).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "29ec683f019608ca0cb6cf69011426ecb5daa69e", "tree": "c87135ac016aa0a27c844dfde2c0e0202e4f0669", "parents": [ "7b971df185807ceb358471e16ce8754ccfcc7de9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "message": "ide-disk: add idedisk_set_doorlock() helper\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7b971df185807ceb358471e16ce8754ccfcc7de9", "tree": "ace1d2e4dcb11a5da560cb758faca64f0e5628d7", "parents": [ "08590556d65b2611c5821bc532ca30db776e6044" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "message": "serverworks: cleanup -\u003eset_dma_mode method\n\nIDE core guarantees that -\u003eset_dma_mode will be called only\nfor DMA modes set in SWDMA/MWDMA/UDMA masks.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "08590556d65b2611c5821bc532ca30db776e6044", "tree": "37c380dabe99807817c469183a68bb065d6360fb", "parents": [ "6ae8b1efcc83103f2e323c9486f56a8671ca1880" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "message": "sl82c105: remove no longer needed -\u003eselectproc method\n\n* Program register 0x40 in sl82c105_resetproc().\n\n* Remove no longer needed sl82c105_selectproc() and pci_set_drvdata() calls.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6ae8b1efcc83103f2e323c9486f56a8671ca1880", "tree": "6f8d8efffa0202450aedd2a23cb47889179f7582", "parents": [ "9b73e76f3cf63379dcf45fcd4f112f5812418d0a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:58 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:58 2008 +0100" }, "message": "sl82c105: program DMA/PIO timings in -\u003edma_start/-\u003eide_dma_end\n\n* Program DMA timings in sl82c105_dma_start() (-\u003edma_start method)\n before starting DMA transfer.\n\n* Add sl82c105_dma_end() (-\u003eide_dma_end method) to switch back to\n PIO timings when DMA transfer is complete.\n\n* In sl82c105_set_pio_mode() program timings regardless of -\u003eusing_dma\n setting and in sl82c105_set_dma_mode() only cache the new timings.\n\n* Remove no longer needed sl82c105_{ide_dma_on,off_quietly}().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9b73e76f3cf63379dcf45fcd4f112f5812418d0a", "tree": "4e6bef87cd0cd6d848fc39a5ae25b981dbbe035b", "parents": [ "50d9a126240f9961cfdd063336bbeb91f77a7dce", "23c3e290fb9ce38cabc2822b47583fc8702411bf" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:19:08 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:19:08 2008 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits)\n [SCSI] usbstorage: use last_sector_bug flag universally\n [SCSI] libsas: abstract STP task status into a function\n [SCSI] ultrastor: clean up inline asm warnings\n [SCSI] aic7xxx: fix firmware build\n [SCSI] aacraid: fib context lock for management ioctls\n [SCSI] ch: remove forward declarations\n [SCSI] ch: fix device minor number management bug\n [SCSI] ch: handle class_device_create failure properly\n [SCSI] NCR5380: fix section mismatch\n [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices\n [SCSI] IB/iSER: add logical unit reset support\n [SCSI] don\u0027t use __GFP_DMA for sense buffers if not required\n [SCSI] use dynamically allocated sense buffer\n [SCSI] scsi.h: add macro for enclosure bit of inquiry data\n [SCSI] sd: add fix for devices with last sector access problems\n [SCSI] fix pcmcia compile problem\n [SCSI] aacraid: add Voodoo Lite class of cards.\n [SCSI] aacraid: add new driver features flags\n [SCSI] qla2xxx: Update version number to 8.02.00-k7.\n [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.\n ...\n" }, { "commit": "50d9a126240f9961cfdd063336bbeb91f77a7dce", "tree": "7e9c306cc49ad11e9e23cd4616591f323d9ff5cc", "parents": [ "29bd17af7d8ffc16bb5eb286947495c166ea826e", "946fef4e14ebc2f14ab05f54789843621fe87f60" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:15:23 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:15:23 2008 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:\n [CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m\n" }, { "commit": "29bd17af7d8ffc16bb5eb286947495c166ea826e", "tree": "5c20c44b51bdb3573949d1dc23bc3d3927d759fa", "parents": [ "2ba14a017a4ba8d2266316f481d4ad7400073d18", "2fe5c1d7eb88830b09c863a4b5b3279dc120f3af" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:11:13 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:11:13 2008 -0800" }, "message": "Merge branch \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2\n\n* \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits)\n ocfs2: clean up bh null checks\n ocfs2: document access rules for blocked_lock_list\n configfs: file.c fix possible recursive locking\n configfs: dir.c fix possible recursive locking\n configfs: Remove EXPERIMENTAL\n ocfs2: bump version number\n ocfs2/dlm: Clear joining_node on hearbeat node down\n ocfs2: convert byte order of constant instead of variable\n ocfs2: Update default cluster timeouts\n ocfs2: printf fixes\n ocfs2: Use generic_file_llseek\n ocfs2: Safer read_inline_data()\n ocfs2: Silence false lockdep warnings\n [PATCH 2/2] ocfs2: cluster aware flock()\n [PATCH 1/2] ocfs2: add flock lock type\n ocfs2: Local alloc window size changeable via mount option\n ocfs2: Support commit\u003d mount option\n ocfs2: Add missing permission checks\n [PATCH 2/2] ocfs2: Implement group add for online resize\n [PATCH 1/2] ocfs2: Add group extend for online resize\n ...\n" }, { "commit": "2ba14a017a4ba8d2266316f481d4ad7400073d18", "tree": "6e86dcbbb7898eb747f1198e33961eb68bfcdb4d", "parents": [ "99f1c97dbdb30e958edfd1ced0ae43df62504e07", "a984f58dd97f22f5113700322fed311a0ee29947" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:08:28 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:08:28 2008 -0800" }, "message": "Merge branch \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev\n\n* \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (67 commits)\n fix drivers/ata/sata_fsl.c double-decl\n [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()\n pata_legacy: Merge winbond support\n ata_generic: Cenatek support\n pata_winbond: error return\n pata_serverworks: Fix cable types and cosmetics\n pata_mpc52xx: remove un-needed assignment\n libata: fix off-by-one in error categorization\n ahci: factor out AHCI enabling and enable AHCI before reading CAP\n ata_piix: implement SIDPR SCR access\n ata_piix: convert to prepare - activate initialization\n libata: factor out ata_pci_activate_sff_host() from ata_pci_one()\n [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()\n pata_legacy: resychronize with upstream changes and resubmit\n [libata] pata_legacy: typo fix\n [libata] pata_winbond: update for new -\u003edata_xfer hook\n pata_pcmcia: convert to new data_xfer prototype\n libata annotations and fixes\n libata: use dev_driver_string() instead of \"libata\" in libata-sff.c\n ata_piix: kill unused constants and flags\n ...\n" }, { "commit": "2fe5c1d7eb88830b09c863a4b5b3279dc120f3af", "tree": "c04e3249e3ae14f935ae1d090cd88833c96e6e3b", "parents": [ "7ec373cf33533af6c50828a62f6b305c2d7fa931" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Wed Jan 23 18:35:31 2008 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:48 2008 -0800" }, "message": "ocfs2: clean up bh null checks\n\nIf we know a buffer_head is non-null, then brelse() is unnecessary and\nput_bh() can be used instead. Also, an explicit check for NULL is\nunnecessary when using brelse(). This patch only covers buffer_head_io.c and\nresize.c, which have recently added code which exhibits this problem.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "7ec373cf33533af6c50828a62f6b305c2d7fa931", "tree": "e6f9f829f9d66658e57b5700935dca38f798cbf8", "parents": [ "116ba5d5ea1a5789a8c14b1087014007cada363b" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Wed Jan 23 16:54:48 2008 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:48 2008 -0800" }, "message": "ocfs2: document access rules for blocked_lock_list\n\nocfs2_super-\u003eblocked_lock_list and ocfs2_super-\u003eblocked_lock_count have some\nusage restrictions which aren\u0027t immediately obvious to anyone reading the\ncode. It\u0027s a good idea to document this so that we avoid making costly\nmistakes in the future.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "116ba5d5ea1a5789a8c14b1087014007cada363b", "tree": "d63c0812f81b1d0bb1e28b726a4d9eae493b3c79", "parents": [ "ba611edfe406be745be95c332990c8e908c026c3" ], "author": { "name": "Joonwoo Park", "email": "joonwpark81@gmail.com", "time": "Wed Dec 26 12:09:57 2007 +0900" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:47 2008 -0800" }, "message": "configfs: file.c fix possible recursive locking\n\nconfigfs_register_subsystem() with default_groups triggers recursive locking.\nit seems that mutex_lock_nested is needed.\n\n\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n[ INFO: possible recursive locking detected ]\n2.6.24-rc6 #145\n---------------------------------------------\nswapper/1 is trying to acquire lock:\n (\u0026sb-\u003es_type-\u003ei_mutex_key#3){--..}, at: [\u003cc40c9a9e\u003e] configfs_add_file+0x2e/0x70\n\nbut task is already holding lock:\n (\u0026sb-\u003es_type-\u003ei_mutex_key#3){--..}, at: [\u003cc40ca985\u003e] configfs_register_subsystem+0x55/0x130\n\nother info that might help us debug this:\n1 lock held by swapper/1:\n #0: (\u0026sb-\u003es_type-\u003ei_mutex_key#3){--..}, at: [\u003cc40ca985\u003e] configfs_register_subsystem+0x55/0x130\n\nstack backtrace:\nPid: 1, comm: swapper Not tainted 2.6.24-rc6 #145\n [\u003cc40053ba\u003e] show_trace_log_lvl+0x1a/0x30\n [\u003cc4005e82\u003e] show_trace+0x12/0x20\n [\u003cc400687e\u003e] dump_stack+0x6e/0x80\n [\u003cc404ec72\u003e] __lock_acquire+0xe62/0x1120\n [\u003cc404efb2\u003e] lock_acquire+0x82/0xa0\n [\u003cc43fda88\u003e] mutex_lock_nested+0x98/0x2e0\n [\u003cc40c9a9e\u003e] configfs_add_file+0x2e/0x70\n [\u003cc40c9b0c\u003e] configfs_create_file+0x2c/0x40\n [\u003cc40ca639\u003e] configfs_attach_item+0x139/0x220\n [\u003cc40ca734\u003e] configfs_attach_group+0x14/0x140\n [\u003cc40ca7e9\u003e] configfs_attach_group+0xc9/0x140\n [\u003cc40ca9f6\u003e] configfs_register_subsystem+0xc6/0x130\n [\u003cc45c8186\u003e] init_netconsole+0x2b6/0x300\n [\u003cc45a75f2\u003e] kernel_init+0x142/0x320\n [\u003cc4004fb3\u003e] kernel_thread_helper+0x7/0x14\n \u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n\nSigned-off-by: Joonwoo Park \u003cjoonwpark81@gmail.com\u003e\nSigned-off-by: Joel Becker \u003cjoel.becker@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "ba611edfe406be745be95c332990c8e908c026c3", "tree": "c343d9dbbc86379414b7976bfbe507763d376611", "parents": [ "02ac0499c0e3c62f2e2bf61a13870b36ea103564" ], "author": { "name": "Joonwoo Park", "email": "joonwpark81@gmail.com", "time": "Wed Dec 26 12:09:57 2007 +0900" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:47 2008 -0800" }, "message": "configfs: dir.c fix possible recursive locking\n\nconfigfs_register_subsystem() with default_groups triggers recursive locking.\nit seems that mutex_lock_nested is needed.\n\n\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n[ INFO: possible recursive locking detected ]\n2.6.24-rc6 #141\n---------------------------------------------\nswapper/1 is trying to acquire lock:\n (\u0026sb-\u003es_type-\u003ei_mutex_key#3){--..}, at: [\u003cc40ca76f\u003e] configfs_attach_group+0x4f/0x190\n\nbut task is already holding lock:\n (\u0026sb-\u003es_type-\u003ei_mutex_key#3){--..}, at: [\u003cc40ca9d5\u003e] configfs_register_subsystem+0x55/0x130\n\nother info that might help us debug this:\n1 lock held by swapper/1:\n #0: (\u0026sb-\u003es_type-\u003ei_mutex_key#3){--..}, at: [\u003cc40ca9d5\u003e] configfs_register_subsystem+0x55/0x130\n\nstack backtrace:\nPid: 1, comm: swapper Not tainted 2.6.24-rc6 #141\n [\u003cc40053ba\u003e] show_trace_log_lvl+0x1a/0x30\n [\u003cc4005e82\u003e] show_trace+0x12/0x20\n [\u003cc400687e\u003e] dump_stack+0x6e/0x80\n [\u003cc404ec72\u003e] __lock_acquire+0xe62/0x1120\n [\u003cc404efb2\u003e] lock_acquire+0x82/0xa0\n [\u003cc43fdad8\u003e] mutex_lock_nested+0x98/0x2e0\n [\u003cc40ca76f\u003e] configfs_attach_group+0x4f/0x190\n [\u003cc40caa46\u003e] configfs_register_subsystem+0xc6/0x130\n [\u003cc45c8186\u003e] init_netconsole+0x2b6/0x300\n [\u003cc45a75f2\u003e] kernel_init+0x142/0x320\n [\u003cc4004fb3\u003e] kernel_thread_helper+0x7/0x14\n \u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n\nSigned-off-by: Joonwoo Park \u003cjoonwpark81@gmail.com\u003e\nSigned-off-by: Joel Becker \u003cjoel.becker@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "02ac0499c0e3c62f2e2bf61a13870b36ea103564", "tree": "cbad5139aa18c5e8e2728afaf02cc76ce66ada4e", "parents": [ "0e5ae032030387bf0926aa980f2105646ead2b47" ], "author": { "name": "Joel Becker", "email": "joel.becker@oracle.com", "time": "Mon Dec 31 13:56:47 2007 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:47 2008 -0800" }, "message": "configfs: Remove EXPERIMENTAL\n\nconfigfs has been alive and kicking for a while now. It underpins some\nnon-EXPERIMENTAL subsystems, such as OCFS2\u0027s cluster stack.\n\nSigned-off-by: Joel Becker \u003cjoel.becker@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "0e5ae032030387bf0926aa980f2105646ead2b47", "tree": "83a9b92f685abffb8fea85c694eb43b53c936b8f", "parents": [ "2d4b1cbb44f5557727c35895a83f82d023573fa9" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Tue Nov 06 15:52:58 2007 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:46 2008 -0800" }, "message": "ocfs2: bump version number\n\nBump the printed version to 1.5.0. This helps us quickly identify which\nversion of Ocfs2 a bug filer is running.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "2d4b1cbb44f5557727c35895a83f82d023573fa9", "tree": "dfd6da78d6c18b9261b3c1cb572986ac5c495f66", "parents": [ "4092d49f705aa19750c39758fa1be767e162c48d" ], "author": { "name": "Tao Ma", "email": "tao.ma@oracle.com", "time": "Thu Jan 10 15:20:55 2008 +0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:46 2008 -0800" }, "message": "ocfs2/dlm: Clear joining_node on hearbeat node down\n\nCurrently the process of dlm join contains 2 steps: query join and assert join.\nAfter query join, the joined node will set its joining_node. So if the joining\nnode happens to panic before the 2nd step, the joined node will fail to clear\nits joining_node flag because that node isn\u0027t in the domain map. It at least\ncause 2 problems.\n1. All the new join request will fail. So no new node can mount the volume.\n2. The joined node can\u0027t umount the volume since during the umount process it\n has to wait for the joining_node to be unknown. So the umount will be hanged.\n\nThe solution is to clear the joining_node before we check the domain map.\n\nSigned-off-by: Tao Ma \u003ctao.ma@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "4092d49f705aa19750c39758fa1be767e162c48d", "tree": "190a48395331e62d0d1f5222b3a8e763ef70e18e", "parents": [ "17104683d262fc6ab58488c4a3f0415012acc636" ], "author": { "name": "Marcin Slusarz", "email": "marcin.slusarz@gmail.com", "time": "Tue Dec 25 15:52:59 2007 +0100" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:46 2008 -0800" }, "message": "ocfs2: convert byte order of constant instead of variable\n\nConvert byte order of constant instead of variable it will be done at\ncompile time vs run time. Remove unused le32_and_cpu.\n\nSigned-off-by: Marcin Slusarz \u003cmarcin.slusarz@gmail.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "17104683d262fc6ab58488c4a3f0415012acc636", "tree": "3e4aa5b62233834b9c55007e4bed6a11a702bfe4", "parents": [ "634bf74d1e8a8d06727505ea4eb73e780d7aa246" ], "author": { "name": "Sunil Mushran", "email": "sunil.mushran@oracle.com", "time": "Tue Nov 06 16:10:23 2007 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:45 2008 -0800" }, "message": "ocfs2: Update default cluster timeouts\n\nLots of people are having trouble with the default timeouts, which are too\nlow. These new values are derived from an informal survey taken on\nocfs2-users, as well as data from bug reports. This should reduce the amount\nof cluster disconnects and subsequent fencing seen during normal workloads.\n\nSigned-off-by: Sunil Mushran \u003csunil.mushran@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "634bf74d1e8a8d06727505ea4eb73e780d7aa246", "tree": "b0e26b53ec5755202f8a532f5672f02f2e0fef95", "parents": [ "32c3c0e2e515197ad240f5104116254975e6bbce" ], "author": { "name": "Jan Kara", "email": "jack@suse.cz", "time": "Wed Dec 19 15:25:42 2007 +0100" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:45 2008 -0800" }, "message": "ocfs2: printf fixes\n\nExplicitely convert loff_t to long long in printf. Just for sure...\n\nSigned-off-by: Jan Kara \u003cjack@suse.cz\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "32c3c0e2e515197ad240f5104116254975e6bbce", "tree": "eb68b0a63c68ca9f51a5dad94430696c2bb17b2a", "parents": [ "d2849fb294d92d6eee0a811c688f1ecb39d26800" ], "author": { "name": "Jan Kara", "email": "jack@suse.cz", "time": "Wed Dec 19 15:24:52 2007 +0100" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:45 2008 -0800" }, "message": "ocfs2: Use generic_file_llseek\n\nWe should use generic_file_llseek() and not default_llseek() so that\ns_maxbytes gets properly checked when seeking.\n\nSigned-off-by: Jan Kara \u003cjack@suse.cz\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "d2849fb294d92d6eee0a811c688f1ecb39d26800", "tree": "cdfab35099e97d64e47ebebd14067053ea08459e", "parents": [ "5fa0613ea58a80f69852b242337121bd39dc798e" ], "author": { "name": "Jan Kara", "email": "jack@suse.cz", "time": "Wed Dec 19 15:24:09 2007 +0100" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:44 2008 -0800" }, "message": "ocfs2: Safer read_inline_data()\n\nIn ocfs2_read_inline_data() we should store file size in loff_t. Although\nthe file size should fit in 32 bits we cannot be sure in case filesystem is\ncorrupted.\n\nSigned-off-by: Jan Kara \u003cjack@suse.cz\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "5fa0613ea58a80f69852b242337121bd39dc798e", "tree": "21170694624428a8903efc6cba843fd10de93c64", "parents": [ "53fc622b9e829c8e632e45ef8c14f054388759c1" ], "author": { "name": "Jan Kara", "email": "jack@suse.cz", "time": "Fri Jan 11 00:11:45 2008 +0100" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:44 2008 -0800" }, "message": "ocfs2: Silence false lockdep warnings\n\nCreate separate lockdep lock classes for system file\u0027s i_mutexes. They are\nused to guard allocations and similar things and thus rank differently\nthan i_mutex of a regular file or directory.\n\nSigned-off-by: Jan Kara \u003cjack@suse.cz\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "53fc622b9e829c8e632e45ef8c14f054388759c1", "tree": "6b8585ab00312dd798d8087c452393bf6cc0d344", "parents": [ "cf8e06f1a860d8680d6bb4ac8ec7d7724988e46f" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Thu Dec 20 16:49:04 2007 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:43 2008 -0800" }, "message": "[PATCH 2/2] ocfs2: cluster aware flock()\n\nHook up ocfs2_flock(), using the new flock lock type in dlmglue.c. A new\nmount option, \"localflocks\" is added so that users can revert to old\nfunctionality as need be.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "cf8e06f1a860d8680d6bb4ac8ec7d7724988e46f", "tree": "4705326641f39fdb1b97c925b55dae3c4634d5e0", "parents": [ "2fbe8d1ebe004425b4f7b8bba345623d2280be82" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Thu Dec 20 16:43:10 2007 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:43 2008 -0800" }, "message": "[PATCH 1/2] ocfs2: add flock lock type\n\nThis adds a new dlmglue lock type which is intended to back flock()\nrequests.\n\nSince these locks are driven from userspace, usage rules are much more\nliberal than the typical Ocfs2 internal cluster lock. As a result, we can\u0027t\nmake use of most dlmglue features - lock caching and lock level\noptimizations in particular. Additionally, userspace is free to deadlock\nitself, so we have to deal with that in the same way as the rest of the\nkernel - by allowing a signal to abort a lock request.\n\nIn order to keep ocfs2_cluster_lock() complexity down, ocfs2_file_lock()\ndoes it\u0027s own dlm coordination. We still use the same helper functions\nthough, so duplicated code is kept to a minimum.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "2fbe8d1ebe004425b4f7b8bba345623d2280be82", "tree": "7620954c7a364c41306a3becc0046dd1e235158f", "parents": [ "d147b3d630edef1d34de6ea819787a1ac1b8603b" ], "author": { "name": "Sunil Mushran", "email": "sunil.mushran@oracle.com", "time": "Thu Dec 20 14:58:11 2007 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:43 2008 -0800" }, "message": "ocfs2: Local alloc window size changeable via mount option\n\nLocal alloc is a performance optimization in ocfs2 in which a node\ntakes a window of bits from the global bitmap and then uses that for\nall small local allocations. This window size is fixed to 8MB currently.\nThis patch allows users to specify the window size in MB including\ndisabling it by passing in 0. If the number specified is too large,\nthe fs will use the default value of 8MB.\n\nmount -o localalloc\u003dX /dev/sdX /mntpoint\n\nSigned-off-by: Sunil Mushran \u003csunil.mushran@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "d147b3d630edef1d34de6ea819787a1ac1b8603b", "tree": "bd417b27fd58fa3c44be6b8451d929f848981ffd", "parents": [ "0957f00796157564281ea6ff2cea7ef4f897775a" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Wed Nov 07 14:40:36 2007 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:42 2008 -0800" }, "message": "ocfs2: Support commit\u003d mount option\n\nMostly taken from ext3. This allows the user to set the jbd commit interval,\nin seconds. The default of 5 seconds stays the same, but now users can\neasily increase the commit interval. Typically, this would be increased in\norder to benefit performance at the expense of data-safety.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "0957f00796157564281ea6ff2cea7ef4f897775a", "tree": "b7db05ed93642d3f5769816b57633673f9ec81f9", "parents": [ "7909f2bf835376a20d6dbf853eb459a27566eba2" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Tue Dec 18 18:58:18 2007 -0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:05:19 2008 -0800" }, "message": "ocfs2: Add missing permission checks\n\nCheck that an online resize is being driven by a user with permission to\nchange system resource limits.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "7909f2bf835376a20d6dbf853eb459a27566eba2", "tree": "d256570ad048e27741970517929bc3c6d4c2b656", "parents": [ "d659072f736837e56b6433d58e5315ad1d4d5ccf" ], "author": { "name": "Tao Ma", "email": "tao.ma@oracle.com", "time": "Tue Dec 18 15:47:25 2007 +0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 15:04:24 2008 -0800" }, "message": "[PATCH 2/2] ocfs2: Implement group add for online resize\n\nThis patch adds the ability for a userspace program to request that a\nproperly formatted cluster group be added to the main allocation bitmap for\nan Ocfs2 file system. The request is made via an ioctl, OCFS2_IOC_GROUP_ADD.\nOn a high level, this is similar to ext3, but we use a different ioctl as\nthe structure which has to be passed through is different.\n\nDuring an online resize, tunefs.ocfs2 will format any new cluster groups\nwhich must be added to complete the resize, and call OCFS2_IOC_GROUP_ADD on\neach one. Kernel verifies that the core cluster group information is valid\nand then does the work of linking it into the global allocation bitmap.\n\nSigned-off-by: Tao Ma \u003ctao.ma@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "d659072f736837e56b6433d58e5315ad1d4d5ccf", "tree": "56882b7b36c6b60a8208f6ed5bee9904adc7b649", "parents": [ "7f68fc28219be3b44ef4132f95c6506ff3e806b5" ], "author": { "name": "Tao Ma", "email": "tao.ma@oracle.com", "time": "Tue Dec 18 15:47:03 2007 +0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:53:35 2008 -0800" }, "message": "[PATCH 1/2] ocfs2: Add group extend for online resize\n\nThis patch adds the ability for a userspace program to request an extend of\nlast cluster group on an Ocfs2 file system. The request is made via ioctl,\nOCFS2_IOC_GROUP_EXTEND. This is derived from EXT3_IOC_GROUP_EXTEND, but is\nobviously Ocfs2 specific.\n\ntunefs.ocfs2 would call this for an online-resize operation if the last\ncluster group isn\u0027t full.\n\nSigned-off-by: Tao Ma \u003ctao.ma@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "23c3e290fb9ce38cabc2822b47583fc8702411bf", "tree": "43c703144aeed36658ed9df1d3080aba4cbcab4b", "parents": [ "366ca51f30de1cbb5b356c70b7bb22051c558e41" ], "author": { "name": "Hans de Goede", "email": "j.w.r.degoede@hhs.nl", "time": "Sun Jan 20 11:27:29 2008 +0100" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Jan 25 16:50:31 2008 -0600" }, "message": "[SCSI] usbstorage: use last_sector_bug flag universally\n\nThis patch sets the last_sector_bug flag to 1 for all USB disks. This is\nneeded to makes the cardreader on various HP multifunction printers work.\n\nSince the performance impact is negible we set this flag for all USB disks to\navoid an unusual_devs.h nightmare.\n\nSigned-off-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nAcked-by: Matthew Dharm \u003cmdharm-usb@one-eyed-alien.net\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "7f68fc28219be3b44ef4132f95c6506ff3e806b5", "tree": "abd2407d9c3e0d729b10669cf8f871f1056a25c2", "parents": [ "e9d578a8f279d5e7d1e903f436aefc76ba330b43" ], "author": { "name": "Tao Ma", "email": "tao.ma@oracle.com", "time": "Tue Dec 18 15:46:37 2007 +0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:48:57 2008 -0800" }, "message": "ocfs2: Reserve ioctl range\n\nWe need to reserve at least two ioctls for online-resize. Reserve a small\nrange of ioctls for Ocfs2 use in Documentation/ioctl-number.txt. This should\ngive us enough room for future growth.\n\nSigned-off-by: Tao Ma \u003ctao.ma@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "e9d578a8f279d5e7d1e903f436aefc76ba330b43", "tree": "ac5ee47053d00940d25f6dd9d2b23cb18e587cf0", "parents": [ "1252c434e39dc60ca9e8ed682f3e04930e2c08de" ], "author": { "name": "Tao Ma", "email": "tao.ma@oracle.com", "time": "Tue Dec 18 15:46:10 2007 +0800" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:48:54 2008 -0800" }, "message": "ocfs2: Initalize bitmap_cpg of ocfs2_super to be the maximum.\n\nThis value is initialized from global_bitmap-\u003eid2.i_chain.cl_cpg. If there\nis only 1 group, it will be equal to the total clusters in the volume. So\nas for online resize, it should change for all the nodes in the cluster.\nIt isn\u0027t easy and there is no corresponding lock for it.\n\nbitmap_cpg is only used in 2 areas:\n1. Check whether the suballoc is too large for us to allocate from the global\n bitmap, so it is little used. And now the suballoc size is 2048, it rarely\n meet this situation and the check is almost useless.\n2. Calculate which group a cluster belongs to. We use it during truncate to\n figure out which cluster group an extent belongs too. But we should be OK\n if we increase it though as the cluster group calculated shouldn\u0027t change\n and we only ever have a small bitmap_cpg on file systems with a single\n cluster group.\n\nSigned-off-by: Tao Ma \u003ctao.ma@oracle.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "946fef4e14ebc2f14ab05f54789843621fe87f60", "tree": "f883bbadbac017ac46e00d8da528b50b78c1318d", "parents": [ "2d94dfc8c38edf63e91e48fd55c3a8822b6a9ced" ], "author": { "name": "Herbert Xu", "email": "herbert@gondor.apana.org.au", "time": "Sat Jan 26 09:48:44 2008 +1100" }, "committer": { "name": "Herbert Xu", "email": "herbert@gondor.apana.org.au", "time": "Sat Jan 26 09:48:44 2008 +1100" }, "message": "[CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m\n\nCurrently it is possible to select HW_RANDOM as a module and have\nhifn795x built-in. This causes a build problem because hifn795x\nwill then call hwrng_register which isn\u0027t built-in.\n\nThis patch introduces a new config option to control the hifn795x\nRNG which lets us avoid this problem.\n\nSigned-off-by: Herbert Xu \u003cherbert@gondor.apana.org.au\u003e\n" }, { "commit": "1252c434e39dc60ca9e8ed682f3e04930e2c08de", "tree": "7efbf0baa5ca6d6cc1468b898c41e40338611793", "parents": [ "628a24f5bdf31b795d596eaed71670579b96a9aa" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Tue Oct 30 12:09:03 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:48:42 2008 -0800" }, "message": "ocfs2: Documentation update\n\nRemove \u0027readpages\u0027 from the list in ocfs2.txt. Instead of having two\nidentical lists, I just removed the list in the OCFS2 section of fs/Kconfig\nand added a pointer to Documentation/filesystems/ocfs2.txt.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "628a24f5bdf31b795d596eaed71670579b96a9aa", "tree": "3dcd23a6cfd10e142cf0397a53e5f95ca72f5168", "parents": [ "d69a3ad6a0e47b2aa9b2b2ddfd385752132a4d34" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Tue Oct 30 12:08:32 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:48:12 2008 -0800" }, "message": "ocfs2: Readpages support\n\nAdd -\u003ereadpages support to Ocfs2. This is rather trivial - all it required\nis a small update to ocfs2_get_block (for mapping full extents via b_size)\nand an ocfs2_readpages() function which partially mirrors ocfs2_readpage().\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "d69a3ad6a0e47b2aa9b2b2ddfd385752132a4d34", "tree": "8e4a3283e9ce892217f69b1066d7933908652b00", "parents": [ "e63aecb651ba73dffc62f9608ee1b7ae2a0ffd4b" ], "author": { "name": "Joel Becker", "email": "joel.becker@oracle.com", "time": "Fri Oct 05 14:31:44 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:46:04 2008 -0800" }, "message": "dlm: Split lock mode and flag constants into a sharable header.\n\nThis allows others to use the DLM constants without being tied to the\nfunction API of fs/dlm.\n\nSigned-off-by: Joel Becker \u003cjoel.becker@oracle.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\nSigned-off-by: David Teigland \u003cteigland@redhat.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "e63aecb651ba73dffc62f9608ee1b7ae2a0ffd4b", "tree": "06a4b727230120fe73421dc3149c21aaed5fe91e", "parents": [ "c934a92d05b549dd2f25db72c5fc3cb9dcf1b611" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Thu Oct 18 15:30:42 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:46:01 2008 -0800" }, "message": "ocfs2: Rename ocfs2_meta_[un]lock\n\nCall this the \"inode_lock\" now, since it covers both data and meta data.\nThis patch makes no functional changes.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "c934a92d05b549dd2f25db72c5fc3cb9dcf1b611", "tree": "57150c87d1d465db28fceaa14c9d5b220c7a3954", "parents": [ "f1f540688eae66c274ff1c1133b5d9c687b28f58" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Thu Oct 18 15:23:46 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:45:57 2008 -0800" }, "message": "ocfs2: Remove data locks\n\nThe meta lock now covers both meta data and data, so this just removes the\nnow-redundant data lock.\n\nCombining locks saves us a round of lock mastery per inode and one less lock\nto ping between nodes during read/write.\n\nWe don\u0027t lose much - since meta locks were always held before a data lock\n(and at the same level) ordered writeout mode (the default) ensured that\nflushing for the meta data lock also pushed out data anyways.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "f1f540688eae66c274ff1c1133b5d9c687b28f58", "tree": "0abf61ad3e15b1c87d5958aae7b02d852672c159", "parents": [ "34d024f84345807bf44163fac84e921513dde323" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Thu Oct 18 15:13:59 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:45:54 2008 -0800" }, "message": "ocfs2: Add data downconvert worker to inode lock\n\nIn order to extend inode lock coverage to inode data, we use the same data\ndownconvert worker with only a small modification to only do work for\nregular files.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "34d024f84345807bf44163fac84e921513dde323", "tree": "aef303ae5feeb42cb8791acc1c0b8a74f0a97674", "parents": [ "6f7b056ea9c6fa978c79ca626eff43549df94dbb" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Mon Sep 24 15:56:19 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:45:34 2008 -0800" }, "message": "ocfs2: Remove mount/unmount votes\n\nThe node maps that are set/unset by these votes are no longer relevant, thus\nwe can remove the mount and umount votes. Since those are the last two\nremaining votes, we can also remove the entire vote infrastructure.\n\nThe vote thread has been renamed to the downconvert thread, and the small\namount of functionality related to managing it has been moved into\nfs/ocfs2/dlmglue.c. All references to votes have been removed or updated.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "99f1c97dbdb30e958edfd1ced0ae43df62504e07", "tree": "cc61393c912b3c1b095a9c74322f8e1364ab9b3a", "parents": [ "b31fde6db2b76a9f7f59bf016652b46cff43f8da", "8176d297c73a06e6076c9c31f6404047567f6324" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 14:41:24 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 14:41:24 2008 -0800" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (81 commits)\n RDMA/cxgb3: Fix the T3A workaround checks\n IB/ipath: Remove unnecessary cast\n IPoIB: Constify seq_operations function pointer tables\n RDMA/cxgb3: Mark QP as privileged based on user capabilities\n RDMA/cxgb3: Fix page shift calculation in build_phys_page_list()\n RDMA/cxgb3: Flush the receive queue when closing\n IB/ipath: Trivial simplification of ipath_make_ud_req()\n IB/mthca: Update latest \"native Arbel\" firmware revision\n IPoIB: Remove redundant check of netif_queue_stopped() in xmit handler\n IB/ipath: Add mappings from HW register to PortInfo port physical state\n IB/ipath: Changes to support PIO bandwidth check on IBA7220\n IB/ipath: Minor cleanup of unused fields and chip-specific errors\n IB/ipath: New sysfs entries to control 7220 features\n IB/ipath: Add new chip-specific functions to older chips, consistent init\n IB/ipath: Remove unused MDIO interface code\n IB/ehca: Prevent RDMA-related connection failures on some eHCA2 hardware\n IB/ehca: Add \"port connection autodetect mode\"\n IB/ehca: Define array to store SMI/GSI QPs\n IB/ehca: Remove CQ-QP-link before destroying QP in error path of create_qp()\n IB/iser: Add change_queue_depth method\n ...\n" }, { "commit": "6f7b056ea9c6fa978c79ca626eff43549df94dbb", "tree": "e8318b4f7390547ad84208c393608f7141c027d3", "parents": [ "6561168cb442be8d2769dce663870b6a28573e16" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Mon Sep 24 15:09:41 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:36:40 2008 -0800" }, "message": "ocfs2: Remove fs dependency on ocfs2_heartbeat module\n\nNow that the dlm exposes domain information to us, we don\u0027t need generic\nnode up / node down callbacks. And since the DLM is only telling us when a\nnode goes down unexpectedly, we no longer need to optimize away node down\ncallbacks via the umount map.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "6561168cb442be8d2769dce663870b6a28573e16", "tree": "9abcc18eb39d15c9c3414adf970dd26cf1c2a296", "parents": [ "2d94dfc8c38edf63e91e48fd55c3a8822b6a9ced" ], "author": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Sep 07 11:11:10 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:36:40 2008 -0800" }, "message": "ocfs2_dlm: Call node eviction callbacks from heartbeat handler\n\nWith this, a dlm client can take advantage of the group protocol in the dlm\nto get full notification whenever a node within the dlm domain leaves\nunexpectedly.\n\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "8176d297c73a06e6076c9c31f6404047567f6324", "tree": "d3ea63287941d458f853dc06e1e28115025cab19", "parents": [ "f7fca1e8a8eeb6660396327b48995e3d9a7b6dc2" ], "author": { "name": "Steve Wise", "email": "swise@opengridcomputing.com", "time": "Thu Jan 24 16:30:16 2008 -0600" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Jan 25 14:17:47 2008 -0800" }, "message": "RDMA/cxgb3: Fix the T3A workaround checks\n\nCorrectly work around T3A issues by checking \"hwtype !\u003d T3A\" instead of\n\"hwtype \u003d\u003d T3B\". This will be needed for new hardware types.\n\nSigned-off-by: Steve Wise \u003cswise@opengridcomputing.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "f7fca1e8a8eeb6660396327b48995e3d9a7b6dc2", "tree": "4c174030d1cd5a47660d1cb9d45396b74b49daef", "parents": [ "1cf18d5aab5144866cb5221250905623b03a32a9" ], "author": { "name": "Jan Engelhardt", "email": "jengelh@computergmbh.de", "time": "Tue Jan 22 20:45:30 2008 +0100" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Jan 25 14:17:46 2008 -0800" }, "message": "IB/ipath: Remove unnecessary cast\n\nSigned-off-by: Jan Engelhardt \u003cjengelh@computergmbh.de\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "1cf18d5aab5144866cb5221250905623b03a32a9", "tree": "a4acb4c2039485572e81810bee76b916671454ab", "parents": [ "c6b5b5047417c1becb5e48e748e3acb3801079a1" ], "author": { "name": "Jan Engelhardt", "email": "jengelh@computergmbh.de", "time": "Tue Jan 22 20:45:30 2008 +0100" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Jan 25 14:17:46 2008 -0800" }, "message": "IPoIB: Constify seq_operations function pointer tables\n\nSigned-off-by: Jan Engelhardt \u003cjengelh@computergmbh.de\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "c6b5b5047417c1becb5e48e748e3acb3801079a1", "tree": "8a4efd832544869ec93646be2f5d409119b9b309", "parents": [ "d08ca26ceec4dfbcfdbada4ad728db742ccaecd1" ], "author": { "name": "Steve Wise", "email": "swise@opengridcomputing.com", "time": "Mon Jan 21 14:42:13 2008 -0600" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Jan 25 14:17:45 2008 -0800" }, "message": "RDMA/cxgb3: Mark QP as privileged based on user capabilities\n\nThis is needed to support zero-stag properly.\n\nSigned-off-by: Steve Wise \u003cswise@opengridcomputing.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "d08ca26ceec4dfbcfdbada4ad728db742ccaecd1", "tree": "15c79eb89ce17fcb2b96f1497e52c352d433b0ff", "parents": [ "856b5925047d73a85557203d124d62c5eea1fbd3" ], "author": { "name": "Steve Wise", "email": "swise@opengridcomputing.com", "time": "Mon Jan 21 14:42:11 2008 -0600" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Jan 25 14:17:45 2008 -0800" }, "message": "RDMA/cxgb3: Fix page shift calculation in build_phys_page_list()\n\nThe existing logic incorrectly maps this buffer list:\n\n 0: addr 0x10001000, size 0x1000\n 1: addr 0x10002000, size 0x1000\n\nTo this bogus page list:\n\n 0: 0x10000000\n 1: 0x10002000\n\nThe shift calculation must also take into account the address of the\nfirst entry masked by the page_mask as well as the last address+size\nrounded up to the next page size.\n\nSigned-off-by: Steve Wise \u003cswise@opengridcomputing.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "856b5925047d73a85557203d124d62c5eea1fbd3", "tree": "a2cd5eaff8a758e41d4870c7f62c2c7cf8aca861", "parents": [ "4e1e93a4189a98cfb0e24865f7f44470ae5f805e" ], "author": { "name": "Steve Wise", "email": "swise@opengridcomputing.com", "time": "Mon Jan 21 14:42:09 2008 -0600" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Jan 25 14:17:45 2008 -0800" }, "message": "RDMA/cxgb3: Flush the receive queue when closing\n\n- for kernel mode cqs, call event notification handler when flushing.\n- flush QP when moving from RTS -\u003e CLOSING.\n- fix logic to identify a kernel mode qp.\n\nSigned-off-by: Steve Wise \u003cswise@opengridcomputing.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" } ], "next": "4e1e93a4189a98cfb0e24865f7f44470ae5f805e" }