)]}' { "log": [ { "commit": "1663d2f70a9404b822fb0e8fbc40d42fdfeed0bd", "tree": "c1d0ee8cdce2df9a961300219916dbecc0e87b36", "parents": [ "33a410be6f4b760f0abe3ec05ac808f1c391bd41" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Mar 24 14:01:49 2011 +0200" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:47 2011 +0300" }, "message": "OMAP: DSS2: Taal: Clean up ESD queueing\n\nSeparate the code which queues/cancels ESD work into their own\nfunctions.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "33a410be6f4b760f0abe3ec05ac808f1c391bd41", "tree": "e53fd02ae3f1deda1fb735abdded1eae3788eb81", "parents": [ "88257b26953f73f30acf49587cb42b84be43c587" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Mar 24 13:58:01 2011 +0200" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:44 2011 +0300" }, "message": "OMAP: DSS2: Taal: Implement configurable ESD interval\n\nESD check in Taal driver is currently on/off feature with hardcoded\ninterval. This patch changes it to a configurable interval, which can be\nset from the board file.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "88257b26953f73f30acf49587cb42b84be43c587", "tree": "504d67f7356c700083e1611fd7e374d9496a194f", "parents": [ "d1f5857e4bc9b2620fb3e84b1dbaa0ac11b831b4" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Mon Dec 20 16:26:22 2010 +0200" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:17 2011 +0300" }, "message": "OMAP: DSS2: DSI: ensure VDDS_DSI is disabled on exit\n\nThe panel drivers can leave the VDDS_DSI regulator enabled, even when\nthe panel is disabled, to ensure that the DSI pins are powered.\n\nThis patch ensures that VDDS_DSI is disabled on DSI module unload.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "d1f5857e4bc9b2620fb3e84b1dbaa0ac11b831b4", "tree": "a7f48a1c82be0d87924f015d6b5b3f2773a77fc2", "parents": [ "22d6d676261a5e204a7078df21459747750c92fb" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Fri Jul 30 11:57:57 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:17 2011 +0300" }, "message": "OMAP: DSS2: DSI: Add DSI pad muxing support\n\nAdd dsi_mux_pads function pointer to omap_dss_board_info, and use the\nfunction pointer in DSI code to configure the DSI pads either to normal\nDSI operation, or to pull down when in ULPS.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "22d6d676261a5e204a7078df21459747750c92fb", "tree": "45b0e5811f00a83123bc6551c1f493cbc2762e16", "parents": [ "03329ace1dc7dc9319f6f405381d898fc66fb2cb" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Mon Oct 11 11:33:30 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:17 2011 +0300" }, "message": "OMAP: DSS2: DSI: add parameter to enter ulps on disable\n\nAdd parameter to omapdss_dsi_display_disable() which the panel driver\ncan use to tell if the DSI lanes should be put to ULPS before disabling\nthe interface.\n\nThis can be used to skip ULPS entry in cases where the panel doesn\u0027t\ncare about ULPS state, for example when the panel will be reset, or when\nthe display interface will be enabled again right after the disable.\n\nThis will speed up the operation considerably in cases where entering\nULPS would fail with timeout, and the panel driver isn\u0027t even interested\nin entering ULPS.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "03329ace1dc7dc9319f6f405381d898fc66fb2cb", "tree": "ca282fb0107a545f66601921c85618732faffdb2", "parents": [ "65c62bb953d216aaf0e22692e8e12e5c568a3b02" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Oct 07 13:59:22 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:16 2011 +0300" }, "message": "OMAP: DSS2: DSI: wait for TXCLKESC domain to come out of reset\n\nAdd dsi_cio_wait_tx_clk_esc_reset() function which waits for the\nTXCLKESC domains to come out of reset.\n\nThings have worked fine without this, but better be safe than sorry.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "65c62bb953d216aaf0e22692e8e12e5c568a3b02", "tree": "2d86d4ac5f7acdbb2469a9ee3347cfc1f23f4ef2", "parents": [ "24c1ae4191e911caa08b31079d61ff4db319a101" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Fri Apr 15 11:58:41 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:16 2011 +0300" }, "message": "OMAP: DSS2: DSI: fix CIO init and uninit\n\nUse dsi_enable_scp_clk and dsi_disable_scp_clk in CIO init and uninit,\nand improve the CIO init by adding a few status checks and error\nhandling.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "24c1ae4191e911caa08b31079d61ff4db319a101", "tree": "a0b35c0910cb2c8ff3b1522a6a5c1b1d090bba8f", "parents": [ "c335cbf94e7450fb41aafe97e805752a830d3a43" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed Apr 13 17:12:52 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:15 2011 +0300" }, "message": "OMAP: DSS2: DSI: implement enable/disable SCP clk\n\nSCP clock is needed for CIO on OMAP3, and for CIO and PLL on OMAP4.\nCurrent driver enables the CIO clock always when DSI display is\ninitialized. However, if a DPI display tries to use DSI PLL, the SCP\nclock is never enabled.\n\nThis patch implements simple ref counting enable/disable functions for\nSCP clock.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "c335cbf94e7450fb41aafe97e805752a830d3a43", "tree": "14a169efcd42d6255e959b5fbad7d82a7c794201", "parents": [ "293ef19cbb9ef403b6dc9c96e34096bac5c88b84" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Oct 07 13:27:42 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:15 2011 +0300" }, "message": "OMAP: DSS2: DSI: fix _dsi_print_reset_status\n\nThe bits for TXCLKESCx reset have changed for OMAP3630 and OMAP4.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "293ef19cbb9ef403b6dc9c96e34096bac5c88b84", "tree": "39d3844bd6960963868c31280d8c5711de8994d7", "parents": [ "cc5c185098d85d709cc2a542c40abff0b337e094" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Fri Apr 15 15:07:33 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:14 2011 +0300" }, "message": "OMAP: DSS2: Add FEAT_DSI_REVERSE_TXCLKESC\n\nOMAP3430 has RESETDONETXCLKESCx bits in the order following bitnumber\norder for lanes 0, 1, 2: 28, 27, 26. OMAP3630 and later have them in\nsaner order: 24, 25, 26 (and 27, 28 for OMAP4).\n\nThis patch adds a dss_feature that can be used to differentiate between\nthose two orders of RESETDONETXCLKESCx bits.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "cc5c185098d85d709cc2a542c40abff0b337e094", "tree": "f1abe708c3980ba67adc0574f0f0c223107d3c1d", "parents": [ "2a89dc15331983621b772240ebef9dea2cbe5322" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed Oct 06 15:18:13 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:14 2011 +0300" }, "message": "OMAP: DSS2: DSI: rename complexio related functions\n\nRename ComplexIO from dsi_complexio_xxx to dsi_cio_xxx for brevity.\nAlso, add cio prefix for couple of functions that didn\u0027t have it, but\nare cio related.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "2a89dc15331983621b772240ebef9dea2cbe5322", "tree": "04e174e0dc817d8acbed70d1122617b50f3f309e", "parents": [ "40885ab31f754426c2e9a40362e568778baa5e82" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Fri Jul 30 12:39:34 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:13 2011 +0300" }, "message": "OMAP: DSS2: DSI: add option to leave DSI lanes powered on\n\nThe DSI pins are powered by VDDS_DSI. If VDDS_DSI is off, the DSI pins\nare floating even if they are pinmuxed to, say, safe mode and there\u0027s a\npull down/up.\n\nThis patch gives the panel drivers an option to leave the VDDS_DSI power\nenabled while the DSS itself is turned off. This can be used to keep the\nDSI lanes in a valid state while DSS is off, if the DSI pins are muxed\nfor pull down (not done in this patch).\n\nThere will be a slight power consumption increase (~100 uA?) when the\nVDDS_DSI is left on, but because this option is used when the panel is\nleft on, the regulator consumption is negligible compared to panel power\nconsumption.\n\nWhen the panel is fully turned off the VDDS_DSI is also turned off.\n\nAs an added bonus this will give us faster start up time when starting\nup the DSS and the regulator is already enabled.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "40885ab31f754426c2e9a40362e568778baa5e82", "tree": "8593954df65902178f975a128ba4c502aa5eb341", "parents": [ "95861368e3eb2180dc9f00e916a4ba6f5e1fe4ce" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed Jul 28 15:53:38 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:13 2011 +0300" }, "message": "OMAP: DSS2: DSI: implement ULPS enter and exit\n\nEntering ULPS (Ultra Low Power State) happens by sending ULPS entry\nsequence to the DSI peripheral and pulling the DSI lines down.\n\nExiting ULPS happens by sending ULPS exit sequence.\n\nWe can send the ULPS entry sequence by using OMAP DSS HW\u0027s ULPS support,\nbut we cannot use the ULPS exit support from DSS HW. DSS HW refuses to\nsend the ULPS exit sequence if it thinks that the lanes are not in ULPS.\nAfter being in OFF mode the DSS HW has been reset, and so it does not\nknow that the lanes are actually in ULPS.\n\nThus we need to use the lane override support and manually send the ULPS\nexit sequence. Luckily the sequence is very simple.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "95861368e3eb2180dc9f00e916a4ba6f5e1fe4ce", "tree": "ac334ca0aaae9ce2ba06ca819d7e938d9770f342", "parents": [ "0a0ee46b1ae05862cb05ec43caffc01c5259c4cc" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Apr 14 11:42:22 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:12 2011 +0300" }, "message": "OMAP: DSS2: DSI: Remove CIO LDO status check\n\nCIO LDO status check seems to be broken on OMAP3630+ chips, and it\u0027s\nalso quite unclear what LDO status actually tells and when its status\nchanges.\n\nThis patch removes the whole check on the grounds that if there\u0027s a\nproblem with the LDO, we should anyway catch the problem as we check the\nCIO power state and CIO reset status.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "0a0ee46b1ae05862cb05ec43caffc01c5259c4cc", "tree": "fc27096c33fc5ad189031700e34f02d5c297a303", "parents": [ "179e045369a36c67d590463548749cacc53c9d85" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Tue Jul 27 11:11:48 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:12 2011 +0300" }, "message": "OMAP: DSS2: DSI: Add lane override functions\n\nDSI_DSIPHY_CFG10 register can be used to override DSI lane state. Add\nfunctions to configure and enable the override, and to disable the\noverride.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "179e045369a36c67d590463548749cacc53c9d85", "tree": "87ee44a583298da36789cf4e6920e670bdc9dfd2", "parents": [ "ab46d8b2a346ef9d2dc70d7e11aef5e752a090f8" ], "author": { "name": "Archit Taneja", "email": "archit@ti.com", "time": "Mon Apr 18 09:32:13 2011 +0530" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:11 2011 +0300" }, "message": "OMAP2PLUS: DSS2: Clean up omap_display_init()\n\nCurrently, omap_display_init() maintains arrays for hwmod name(oh_name) and the\ncorrespnding platform_device name(dev_name) needed by omap_device_build().\nA variable oh_count keeps a track of the number of devices to build from oh_name\nbased on what omap revision it is.\n\nClean this up by maintaining an array of omap_dss_hwmod_data struct which is\ndefined for each omap revision as suggested by Tomi Valkeinen. Assign the\ncorresponding omap_dss_hwmod_data array struct to the pointer curr_dss_hwmod in\nomap_display_init().\n\nSigned-off-by: Archit Taneja \u003carchit@ti.com\u003e\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "ab46d8b2a346ef9d2dc70d7e11aef5e752a090f8", "tree": "910c1923f03eb9bdc1de3c267347c19fb9eb830d", "parents": [ "e3502ce97f2d2d183735d9fae76b081a634ffd85" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Mon Apr 04 09:36:23 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:11 2011 +0300" }, "message": "OMAP: DSS2: improve clock debugfs output\n\nOMAP4 has clocks set up in a bit interesting way, causing, for example,\nthe DSS\u0027s \"ick\" to be called \"dss_fck\".\n\nThis patch changes the debugfs output to show both the DSS\u0027s name for\nthe clock (ie. basically the clock alias), and the real name from the\nclock struct.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "e3502ce97f2d2d183735d9fae76b081a634ffd85", "tree": "69058daa11e867a0434f169f2998f3e479e9d5ea", "parents": [ "7636b3b4e178f6c09d9e2650f206eab62a67453b" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Mon Apr 04 15:40:23 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:11 2011 +0300" }, "message": "OMAP: DSS2: Convert simple/strict_strto* to kstrto*\n\nConvert simple/strict_strto* functions to kstrto* functions. Only simple\ncases are converted.\n\nsimple_strto* uses are still left to places where it is used to parse\nnumbers from a list of numbers. These need some other solution than\nkstrto*.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "7636b3b4e178f6c09d9e2650f206eab62a67453b", "tree": "2861d3e6d8beea23a1bcbcda16ac3c2ce99dec6f", "parents": [ "6cb07b256af233965663d6dfc329d7df3dcae786" ], "author": { "name": "Archit Taneja", "email": "archit@ti.com", "time": "Tue Apr 12 13:52:26 2011 +0530" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:10 2011 +0300" }, "message": "OMAP2PLUS: DSS2: Remove hack config \"CONFIG_OMAP2_DSS_USE_DSI_PLL\"\n\nThe clock sources for DISPC_FCLK and LCD1_CLK are now specified in the board file.\nThere is no need for the hack config \"CONFIG_OMAP2_DSS_USE_DSI_PLL\" anymore.\nIntroduce function dpi_use_dsi_pll() which checks for the clock sources to decide\nwhether DSI PLL is to be used or not.\n\nSigned-off-by: Archit Taneja \u003carchit@ti.com\u003e\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "6cb07b256af233965663d6dfc329d7df3dcae786", "tree": "b69c7661c11ce407709d99c043b0944e4f77f73f", "parents": [ "e888166247c0b23d3ccc8e54cf92de7325d71145" ], "author": { "name": "Archit Taneja", "email": "archit@ti.com", "time": "Tue Apr 12 13:52:25 2011 +0530" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:10 2011 +0300" }, "message": "OMAP: DSS2: HDMI: Use dss_device clock configuration for HDMI PLL parameters\n\nMove some of the configurable HDMI PLL parameters to dssdev.clock struct.\nCleanup the function hdmi_compute_pll() by using the parameters defined in the\nboard file and do some cosmetic modifications.\n\nSigned-off-by: Archit Taneja \u003carchit@ti.com\u003e\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "e888166247c0b23d3ccc8e54cf92de7325d71145", "tree": "41eb91736e9a2ec7b862146f02ab83516e4b392e", "parents": [ "89a35e5170fc579e4fc3a1f3444c5dc1aa36904d" ], "author": { "name": "Archit Taneja", "email": "archit@ti.com", "time": "Tue Apr 12 13:52:24 2011 +0530" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:20:06 2011 +0300" }, "message": "OMAP2PLUS: DSS2: Add clock sources to dss device clock configuration\n\nAdd enum dss_clock_source in dssdev.clocks struct so that the clock sources can\nbe specified in the board file.\nReplace hard coded clock sources in dsi.c, dpi.c and replace them with the new\nclock source members in dssdev.clocks. Modify the sdp4430_lcd_device struct in\nboard-4430sdp.c to specify clock sources for DISPC_FCLK, LCD1_CLK and DSI1_FCLK.\n\nSigned-off-by: Archit Taneja \u003carchit@ti.com\u003e\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "89a35e5170fc579e4fc3a1f3444c5dc1aa36904d", "tree": "92e23633ac8b048ec8e8ae076457519e439cc066", "parents": [ "14e4d78485a50312be72a42fd42a28b5b34264dc" ], "author": { "name": "Archit Taneja", "email": "archit@ti.com", "time": "Tue Apr 12 13:52:23 2011 +0530" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:27 2011 +0300" }, "message": "OMAP2PLUS: DSS2: Change enum \"dss_clk_source\" to \"omap_dss_clk_source\"\n\nChange enum dss_clk_source to omap_dss_clock_source and move it to\n\u0027plat/display.h\u0027. Change the enum members to attach \"OMAP_\" in the beginning.\nThese changes are done in order to specify the clock sources for DSS in the\nboard file.\n\nSigned-off-by: Archit Taneja \u003carchit@ti.com\u003e\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "14e4d78485a50312be72a42fd42a28b5b34264dc", "tree": "5c38d2827999f020c1defdd9a8df5d583e33ded4", "parents": [ "06b2b0d597ab6e3011e8215d02b2aa5f831efbc7" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Mar 31 12:03:51 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:26 2011 +0300" }, "message": "OMAP: DSS2: use __exit for selected panel drivers\n\nWe can use __exit for the driver remove function in plain dss panels\n(ie. those that do not need i2c or spi).\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "06b2b0d597ab6e3011e8215d02b2aa5f831efbc7", "tree": "134c76a018086024e77858bb1c4756d6dee0caea", "parents": [ "14572c6356dc4361231ee8f4402468c1f36d2c34" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Mar 31 12:34:06 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:26 2011 +0300" }, "message": "OMAP: DSS2: make omap_dss_(un)register_device static\n\nomap_dss_register_device and omap_dss_unregister_device can only be\ncalled from core.c, so we can make it static.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "14572c6356dc4361231ee8f4402468c1f36d2c34", "tree": "88158bc7225b217df86a260a56ede8845405867f", "parents": [ "bcd8e374b5d39d481d00936e183b0ded99a5f31a" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Oct 28 16:46:38 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:25 2011 +0300" }, "message": "OMAP: DSS2: VENC: Add missing start/stop_device calls\n\nVENC code was missing omap_dss_start/stop_device calls. This didn\u0027t\ncause any problems as VENC could not be compiled as a module, but\nnevertheless it\u0027s better to add the calls.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "bcd8e374b5d39d481d00936e183b0ded99a5f31a", "tree": "1df0b552c6704eb35964eceb707cc2b409007d50", "parents": [ "91ac27a6879df3865e160adf979960a14f17d1aa" ], "author": { "name": "Jani Nikula", "email": "ext-jani.1.nikula@nokia.com", "time": "Fri Sep 24 11:16:24 2010 +0200" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:25 2011 +0300" }, "message": "OMAP: DSS2: OMAPFB: Remove implicit display update on unblank\n\nCurrently omapfb does an implicit display update (for manual update\ndisplays) on unblank.\n\nThere is no guarantee that the framebuffer contains a valid image when\nunblank is called. When using manual update displays it is the\nresponsibility of the user space to update the display, and so it should\nbe in this case also.\n\nThis patch removes the implicit display update on unblank.\n\nSigned-off-by: Jani Nikula \u003cext-jani.1.nikula@nokia.com\u003e\n[tomi.valkeinen@ti.com: improved description]\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "91ac27a6879df3865e160adf979960a14f17d1aa", "tree": "83419eca87a5624680f337e63e5911288db6b3c6", "parents": [ "7a0987bf2cf2683901d0cd7f1504023da2584c5f" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Sep 23 11:18:44 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:25 2011 +0300" }, "message": "OMAP: DSS2: OMAPFB: Handle errors when initializing panel\n\nErrors from the panel driver were ignored during panel initialization.\nHandle the errors and fail accordingly.\n\nAlso move the display initialization to a separate function to make it\ncleaner.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "7a0987bf2cf2683901d0cd7f1504023da2584c5f", "tree": "fe5db5f868acb5c17578759c9d71c0cdf3b08aa1", "parents": [ "b4de838e9ff17695c462e6532a347746c446d10a" ], "author": { "name": "Jani Nikula", "email": "ext-jani.1.nikula@nokia.com", "time": "Wed Jun 16 15:26:36 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:24 2011 +0300" }, "message": "OMAP: DSS2: Add method for querying display dimensions from DSS drivers\n\nAdd get_dimensions() to struct omap_dss_driver. Use the call, if supported\nby the driver, in OMAPFB.\n\nSigned-off-by: Jani Nikula \u003cext-jani.1.nikula@nokia.com\u003e\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "b4de838e9ff17695c462e6532a347746c446d10a", "tree": "f56fcee5286ab1459968203581295e422c41274e", "parents": [ "c6f65e1a4381a2271de1b5dccc94d6c6faad26dc" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed Jun 02 17:57:33 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:24 2011 +0300" }, "message": "OMAP: DSS2: VENC: Remove sleeps at venc enable/disable\n\nVENC code had 50ms sleep after enabling the output and 100ms sleep after\ndisabling the output. I don\u0027t see any reason for these sleeps.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "c6f65e1a4381a2271de1b5dccc94d6c6faad26dc", "tree": "b7d0a010d55a17e5e78dbf8f2a35f4e3be04f18b", "parents": [ "f1aafdcd42ad45a4bda5cb8f4a6782b0e48549ba" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed Jun 02 17:48:22 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:23 2011 +0300" }, "message": "OMAP: DSS2: VENC: make 20ms venc bug-fix sleep optional\n\nThere\u0027s a 20ms sleep after VENC reset. It\u0027s unknown what bug this\ncircumvents and on what platforms. Add a Kconfig option to disable the\nsleep.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "f1aafdcd42ad45a4bda5cb8f4a6782b0e48549ba", "tree": "4997e9fdb195d0022ef7773e5618178becaa441f", "parents": [ "d792eecd9a3e3df7c38b64a954d10ccdc665ec38" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed Jun 02 17:31:53 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:23 2011 +0300" }, "message": "OMAP: DSS2: make 50ms bug-fix sleep optional\n\nFor some unknown reason we may get SYNC_LOST errors from the display\nsubsystem at initialization time if we don\u0027t sleep before resetting the\nDSS. See the source (dss.c) for more comments.\n\nHowever, 50ms is quite long time to sleep, and with some configurations\nthe SYNC_LOST may never happen, so this patch creates a Kconfig option\nto disable the sleep.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "d792eecd9a3e3df7c38b64a954d10ccdc665ec38", "tree": "0e7c7d4711eb6d3e8e5d08f91526144329d6fc9d", "parents": [ "c6940a3dc59d9628c8d407b98b6f57df69e3ef52" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu May 20 15:13:12 2010 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:22 2011 +0300" }, "message": "OMAP: DSS2: remove non-working msleep(40) workaround\n\nThe sleep workaround for the problem described in the comment doesn\u0027t\nreally work. This patch removes the workaround, and improves the comment\nabout the bug, and proposes an userspace workaround.\n\nomap_dss_set_manager() is called 6 times when loading omapdss and\nomapfb, which means that 40ms * 6 \u003d 240ms was spent sleeping when\nbooting up.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "c6940a3dc59d9628c8d407b98b6f57df69e3ef52", "tree": "d041fc4a602b76cff311796d8300e9d77ea41e3b", "parents": [ "cf398fb3e6aed8e7a9b3bcf77f6de2d34ccd2078" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Tue Feb 22 13:36:10 2011 +0200" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:19:16 2011 +0300" }, "message": "OMAP: DSS2: move dss device clock configuration\n\nClock configuration was defined inside dssdev.phy.dsi struct. The clock\nconfig doesn\u0027t really belong there, and so it\u0027s moved to dssdev.clock\nstruct.\n\nNow the explicit clock configuration could also be used for other\ninterfaces than DSI, although there\u0027s no support for it currently.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "cf398fb3e6aed8e7a9b3bcf77f6de2d34ccd2078", "tree": "7e5fe4d850f3021a6117cdcde6b5f583dedc0d0a", "parents": [ "9613c02b5feba3ea03ab34f1422dd122c6e54f57" ], "author": { "name": "Archit Taneja", "email": "archit@ti.com", "time": "Wed Mar 23 09:59:34 2011 +0000" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:10:55 2011 +0300" }, "message": "OMAP: DSS2: DSI: Introduce sync_vc functions\n\nThe DSI protocol engine has no interrupt for signalling the end of a Frame\ntransfer. The present approach is to send a BTA after DISPC generates a\nFRAMEDONE interrupt, and unlock the dsi bus only when the BTA Ack is received.\n\nThe assumption made with this approach was that OMAP will send a BTA only after\nthe long packet corresponding to the last line is sent. However, it is possible\nthat on the DISPC FRAMEDONE interrupt there are 2 (or more) lines of pixel data\nin the DSI line buffer. Hence, the BTA Ack could be received for the long packet\ncorresponding to the second last line (or the third last and so on..).\nTherefore, the current method doesn\u0027t ensure that the complete frame data is\nsent before we start a new transfer. A similar explanation holds valid if we\nsend a BTA in between multiple short/long command packets from the slave port.\n\nIntroduce dsi_sync_vc functions, based on Tomi Valkeinen\u0027s idea, which ensure\nthat the DSI Virtual Channel in use(update_channel) completes its previous work\nbefore proceeding to the next Frame/Command.\n\nFor a frame update, the DSI driver now sends a callback to the Panel Driver\non the FRAMEDONE interrupt itself. The callback in the panel driver then unlocks\nthe bus. dsi_sync_vc() functions are placed in dsi_vc_config_l4() and\ndsi_vc_config_vp() to ensure that the previous task of the Virtual Channel is\ncompleted.\n\nSigned-off-by: Archit Taneja \u003carchit@ti.com\u003e\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "9613c02b5feba3ea03ab34f1422dd122c6e54f57", "tree": "62697f703bf58b38d967d1e09c4145c5b56a1b95", "parents": [ "2783fa849b8073b8bae38bb4f3b7fe79aa4dc40b" ], "author": { "name": "Archit Taneja", "email": "archit@ti.com", "time": "Tue Mar 22 06:33:36 2011 -0500" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:10:55 2011 +0300" }, "message": "OMAP4: DSS2: Register configuration changes for DSI\n\nThe following changes have changed from OMAP3 to OMAP4 DSI:\n-The register field DSI_PLL_FREQSEL in DSI_PLL_CONFIGURATION2 has been removed.\n-DCS_CMD_ENABLE and DCS_CMD_CODE bits have been moved from DSI_CTRL to\nDSI_VC_CTRLi, hence the control of the bits is available per VC.\n-DSI LDO powergood notification doesn\u0027t work on OMAP4. This is mentioned in\nOMAP4 errata revision 1.8(Errata 1.76).\n-OCP_WIDTH register field is included in DSI_VC_CTRL.\n-The SCP clock is also required to access DSI PLL registers\n\nIntroduce dss features for these changes so that DSI runs on both OMAP3 and\nOMAP4.\n\nSigned-off-by: Archit Taneja \u003carchit@ti.com\u003e\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "2783fa849b8073b8bae38bb4f3b7fe79aa4dc40b", "tree": "52a8484900b9105a0efa1c3af3a1693f217f3cfd", "parents": [ "c94dfe05c4b6c269e445691c1fc7a9d8679ba60f" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Fri Apr 08 09:30:27 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:10:54 2011 +0300" }, "message": "OMAP: DSS2: fix panel Kconfig dependencies\n\nAll DPI panels were missing dependency to OMAP2_DSS_DPI. Add the\ndependency.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "c94dfe05c4b6c269e445691c1fc7a9d8679ba60f", "tree": "a83f4d48f32cfc647109c61218f99f8291a19cbf", "parents": [ "89976f2990a97820b73a1768371ee505b0ffc176" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Fri Apr 15 10:42:59 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:10:54 2011 +0300" }, "message": "OMAP: DSS2: DSI: Fix DSI PLL power bug\n\nOMAP3630 has a HW bug causing DSI PLL power command POWER_ON_DIV (0x3)\nto not work properly. The bug prevents us from enabling DSI PLL power\nonly to HS divider block.\n\nThis patch adds a dss feature for the bug and converts POWER_ON_DIV\nrequests to POWER_ON_ALL (0x2).\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "89976f2990a97820b73a1768371ee505b0ffc176", "tree": "95c05c461b1f0aa8079775493130a42c4bd83783", "parents": [ "a9a6500b718a38d4658b8a61edd8fc3aa0418b50" ], "author": { "name": "Archit Taneja", "email": "archit@ti.com", "time": "Thu Mar 31 13:23:35 2011 +0530" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:10:54 2011 +0300" }, "message": "OMAP: DSS2: Fix: Return correct lcd clock source for OMAP2/3\n\ndss.lcd_clk_source is set to the default value DSS_CLK_SRC_FCK at dss_init.\nFor OMAP2 and OMAP3, the dss.lcd_clk_source should always be the same as\ndss.dispc_clk_source. The function dss_get_lcd_clk_source() always returns the\ndefault value DSS_CLK_SRC_FCK for OMAP2/3. This leads to wrong clock dumps when\ndispc_clk_source is not DSS_CLK_SRC_FCK.\n\nCorrect this function to always return dss.dispc_clk_source for OMAP2/3.\n\nSigned-off-by: Archit Taneja \u003carchit@ti.com\u003e\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "a9a6500b718a38d4658b8a61edd8fc3aa0418b50", "tree": "68d106aa4fb167d25be15ef24dbedce17802cb0e", "parents": [ "b2765092aed717ef9fd14bf5f82024359aff0576" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Mon Apr 04 10:02:53 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:10:54 2011 +0300" }, "message": "OMAP: DSS2: DSI: fix dsi_dump_clocks()\n\nOn OMAP4, reading DSI_PLL_CONFIGURATION2 register requires the L3 clock\n(CIO_CLK_ICG) to PLL. Currently dsi_dump_clocks() tries to read that\nregister without enabling the L3 clock, leading to crash if DSI is not\nin use.\n\nThe status of the bit being read from DSI_PLL_CONFIGURATION2 is\navailable from dsi_clock_info-\u003euse_sys_clk, so we can avoid the whole\nproblem by just using that.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "b2765092aed717ef9fd14bf5f82024359aff0576", "tree": "9c46863daf6c37591ec8ba62dde9e3f7bfc1c6c6", "parents": [ "4e9f99d75cc6979b92d03ff9ae129c652c00a8d3" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Thu Apr 07 15:28:47 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:10:54 2011 +0300" }, "message": "OMAP: DSS2: DSI: fix use_sys_clk \u0026 highfreq\n\nuse_sys_clk and highfreq fields in dsi.current_cinfo were never set.\nLuckily they weren\u0027t used anywhere so it didn\u0027t cause any problems.\n\nThis patch fixes those fields and they are now set at the same time as\nthe rest of the fields.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "4e9f99d75cc6979b92d03ff9ae129c652c00a8d3", "tree": "72aee5e34c68c136c9efbefea2ecbc016d6819ba", "parents": [ "f8ae2f08d2c4574ca5c3923d2463ef106b116c2a" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:10:07 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:10:07 2011 +0300" }, "message": "OMAP: DSS2: Move nokia-dsi-panel.h to include/video/\n\narch/arm/plat-omap/include/plat/nokia-dsi-panel.h is an include for the\nOMAP DSS panel driver for Nokia\u0027s DSI displays. A more logical place for\nit is in include/video.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "f8ae2f08d2c4574ca5c3923d2463ef106b116c2a", "tree": "2467aff79c47887ede438a39d8bc7848a171a3ab", "parents": [ "a0b38cc4d35e095f14ab0f486135f8a619ebfc14" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Tue May 10 19:48:10 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:08:51 2011 +0300" }, "message": "OMAP: DSS2: Move panel-generic-dpi.h to include/video/\n\narch/arm/plat-omap/include/plat/panel-generic-dpi.h is an include for\nthe OMAP DSS panel driver for generic DPI displays. A more logical place\nfor it is in include/video.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "a0b38cc4d35e095f14ab0f486135f8a619ebfc14", "tree": "3167225d68f132edcd09b7c5fd044e332e30bdce", "parents": [ "693d92a1bbc9e42681c42ed190bd42b636ca876f" ], "author": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:05:07 2011 +0300" }, "committer": { "name": "Tomi Valkeinen", "email": "tomi.valkeinen@ti.com", "time": "Wed May 11 14:05:07 2011 +0300" }, "message": "OMAP: DSS2: Move display.h to include/video/\n\narch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS\ndriver. A more logical place for it is in include/video.\n\nSigned-off-by: Tomi Valkeinen \u003ctomi.valkeinen@ti.com\u003e\n" }, { "commit": "693d92a1bbc9e42681c42ed190bd42b636ca876f", "tree": "f611cbb3ae94b19263f8b25a0caa0c272c89d73d", "parents": [ "42c36f63ac1366ab0ecc2d5717821362c259f517" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 19:33:54 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 19:33:54 2011 -0700" }, "message": "Linux 2.6.39-rc7\n" }, { "commit": "42c36f63ac1366ab0ecc2d5717821362c259f517", "tree": "1b711b7f5c1f486a07289edb43db4f99f05d6e5a", "parents": [ "c191f6ccee11b79fb562c36007a5af31c705c9e2" ], "author": { "name": "Hugh Dickins", "email": "hughd@google.com", "time": "Mon May 09 17:44:42 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 17:52:17 2011 -0700" }, "message": "vm: fix vm_pgoff wrap in upward expansion\n\nCommit a626ca6a6564 (\"vm: fix vm_pgoff wrap in stack expansion\") fixed\nthe case of an expanding mapping causing vm_pgoff wrapping when you had\ndownward stack expansion. But there was another case where IA64 and\nPA-RISC expand mappings: upward expansion.\n\nThis fixes that case too.\n\nSigned-off-by: Hugh Dickins \u003chughd@google.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c191f6ccee11b79fb562c36007a5af31c705c9e2", "tree": "c011a1212bfb8e8b043ef4acd253bd387c3efadb", "parents": [ "a09a79f66874c905af35d5bb5e5f2fdc7b6b894d", "2fb4e61d9471867677c97bf11dba8f1e9dfa7f7c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 16:59:51 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 16:59:51 2011 -0700" }, "message": "Merge branch \u0027drm-intel-fixes\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6\n\n* \u0027drm-intel-fixes\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:\n drm/i915/lvds: Only act on lid notify when the device is on\n drm/i915: fix intel_crtc_clock_get pipe reads after \"cleanup cleanup\"\n drm/i915: Only enable the plane after setting the fb base (pre-ILK)\n drm/i915/dp: Be paranoid in case we disable a DP before it is attached\n drm/i915: Release object along create user fb error path\n" }, { "commit": "a09a79f66874c905af35d5bb5e5f2fdc7b6b894d", "tree": "9cb2ae1fef7083af91a49c19411e9871e0e59a37", "parents": [ "26822eebb25500fb0776c7c256a6af041e9f538b" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Mon May 09 13:01:09 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 16:22:07 2011 -0700" }, "message": "Don\u0027t lock guardpage if the stack is growing up\n\nLinux kernel excludes guard page when performing mlock on a VMA with\ndown-growing stack. However, some architectures have up-growing stack\nand locking the guard page should be excluded in this case too.\n\nThis patch fixes lvm2 on PA-RISC (and possibly other architectures with\nup-growing stack). lvm2 calculates number of used pages when locking and\nwhen unlocking and reports an internal error if the numbers mismatch.\n\n[ Patch changed fairly extensively to also fix /proc/\u003cpid\u003e/maps for the\n grows-up case, and to move things around a bit to clean it all up and\n share the infrstructure with the /proc bits.\n\n Tested on ia64 that has both grow-up and grow-down segments - Linus ]\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nTested-by: Tony Luck \u003ctony.luck@gmail.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "26822eebb25500fb0776c7c256a6af041e9f538b", "tree": "c8b09fbf2e16ca0e52818767cfbf82289936f970", "parents": [ "047ec4b5de745fa1e0b56afcb06d431046bd36a3", "14fdb152416c0fab80ecddf492c129d7da1bb8ef" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 12:00:49 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 12:00:49 2011 -0700" }, "message": "Merge branch \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86\n\n* \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:\n eeepc-laptop: Use ACPI handle to identify rfkill port\n [PATCH] sony-laptop: limit brightness range to DSDT provided ones\n sony-laptop: report failures on setting LCD brightness\n thinkpad-acpi: module autoloading for newer Lenovo ThinkPads.\n" }, { "commit": "2fb4e61d9471867677c97bf11dba8f1e9dfa7f7c", "tree": "4a1884e1fb0b26f43898ca16a71f5b757d932c1d", "parents": [ "39adb7a542db08998b4ae88f1698c4300dc39b55" ], "author": { "name": "Alex Williamson", "email": "alex.williamson@redhat.com", "time": "Thu Apr 21 16:08:14 2011 -0600" }, "committer": { "name": "Keith Packard", "email": "keithp@keithp.com", "time": "Mon May 09 09:13:22 2011 -0700" }, "message": "drm/i915/lvds: Only act on lid notify when the device is on\n\nIf we\u0027re using vga switcheroo, the device may be turned off\nand poking it can return random state. This provokes an OOPS fixed\nseparately by 8ff887c847 (drm/i915/dp: Be paranoid in case we disable a\nDP before it is attached). Trying to use and respond to events on a\ndevice that has been turned off by the user is in principle a silly thing\nto do.\n\nSigned-off-by: Alex Williamson \u003calex.williamson@redhat.com\u003e\nSigned-off-by: Chris Wilson \u003cchris@chris-wilson.co.uk\u003e\nCc: stable@kernel.org\nSigned-off-by: Keith Packard \u003ckeithp@keithp.com\u003e\n" }, { "commit": "39adb7a542db08998b4ae88f1698c4300dc39b55", "tree": "f1f2818ca04a59ccce7d8c2d33717eb67e3002f4", "parents": [ "49183b2818de6899383bb82bc032f9344d6791ff" ], "author": { "name": "Chris Wilson", "email": "chris@chris-wilson.co.uk", "time": "Fri Apr 22 22:17:21 2011 +0100" }, "committer": { "name": "Keith Packard", "email": "keithp@keithp.com", "time": "Mon May 09 09:13:21 2011 -0700" }, "message": "drm/i915: fix intel_crtc_clock_get pipe reads after \"cleanup cleanup\"\n\nDespite the fixes in 548f245ba6a31 (drm/i915: fix per-pipe reads after\n\"cleanup\"), we missed one neighbouring read that was mistakenly replaced\nwith the reg value in 9db4a9c (drm/i915: cleanup per-pipe reg usage).\nThis was preventing us from correctly determining the mode the BIOS left\nthe panel in for machines that neither have an OpRegion nor access to\nthe VBT, (e.g. the EeePC 700).\n\nSigned-off-by: Chris Wilson \u003cchris@chris-wilson.co.uk\u003e\nCc: Jesse Barnes \u003cjbarnes@virtuousgeek.org\u003e\nCc: stable@kernel.org\nReviewed-by: Jesse Barnes \u003cjbarnes@virtuousgeek.org\u003e\nSigned-off-by: Keith Packard \u003ckeithp@keithp.com\u003e\n" }, { "commit": "49183b2818de6899383bb82bc032f9344d6791ff", "tree": "772319c3c38dccb88e534665bb3a0f1e01c837d6", "parents": [ "31acbcc408f412d1ba73765b846c38642be553c3" ], "author": { "name": "Chris Wilson", "email": "chris@chris-wilson.co.uk", "time": "Tue Apr 19 21:14:14 2011 +0100" }, "committer": { "name": "Keith Packard", "email": "keithp@keithp.com", "time": "Mon May 09 09:13:20 2011 -0700" }, "message": "drm/i915: Only enable the plane after setting the fb base (pre-ILK)\n\nWhen enabling the plane, it is helpful to have already pointed that\nplane to valid memory or else we may incur the wrath of a PGTBL_ER.\nThis code preserved the behaviour from the bad old days for unknown\nreasons...\n\nFound by assert_fb_bound_for_plane().\n\nReferences: https://bugs.freedesktop.org/show_bug.cgi?id\u003d36246\nSigned-off-by: Chris Wilson \u003cchris@chris-wilson.co.uk\u003e\nCc: Daniel Vetter \u003cdaniel.vetter@ffwll.ch\u003e\nCc: Jesse Barnes \u003cjbarnes@virtuousgeek.org\u003e\nSigned-off-by: Keith Packard \u003ckeithp@keithp.com\u003e\n" }, { "commit": "047ec4b5de745fa1e0b56afcb06d431046bd36a3", "tree": "4da0893fd269b5016217f692a09b41f85feb2704", "parents": [ "fd98a5d78062289552fff19afb9aa6918eaee63f", "69b91bc1551a2fc746a01fea9d3291e60be3780d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:13:10 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:13:10 2011 -0700" }, "message": "Merge branch \u0027fix/asoc\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6\n\n* \u0027fix/asoc\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:\n ASoC: Fix CODEC DAI names for Goni\n ASoC: Fix CODEC name in Goni\n davinci-mcasp: fix _CBM_CFS pin directions\n davinci-mcasp: fix _CBM_CFS hw_params\n davinci-mcasp: use bitfield definitions for PDIR\n ASoC: davinci-mcasp: correct tdm_slots limit\n" }, { "commit": "fd98a5d78062289552fff19afb9aa6918eaee63f", "tree": "7c27dbb0c531b99609c1b0c86145397e6b47231c", "parents": [ "7f4238a0ef8858e1f9b02a874b5818f6e9846673", "4f87af46107499415afd238be104587b5a9d7ac3" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:09:04 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:09:04 2011 -0700" }, "message": "Merge branch \u0027drm-fixes\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6\n\n* \u0027drm-fixes\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:\n drm/radeon/kms: add pci id to acer travelmate quirk for 5730\n drm/radeon: fix order of doing things in radeon_crtc_cursor_set\n drm: mm: fix debug output\n drm/radeon/kms: ATPX switcheroo fixes\n drm/nouveau: Fix a crash at card takedown for NV40 and older cards\n" }, { "commit": "7f4238a0ef8858e1f9b02a874b5818f6e9846673", "tree": "2a63b6f59b9d0f5cb3665768893caf437077bdef", "parents": [ "8b061610dac3a3b89770c85ad63b481a47b0c38e", "88f4e9e870c01452e57a6943c04c8d62f6a0a7a6" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:07:55 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:07:55 2011 -0700" }, "message": "Merge branch \u0027hpfs\u0027\n\n* hpfs:\n HPFS: Remove unused variable\n HPFS: Move declaration up, so that there are no out-of-scope pointers\n HPFS: Fix some unaligned accesses\n HPFS: Fix endianity. Make hpfs work on big-endian machines\n HPFS: Implement fsync for hpfs\n HPFS: Fix a bug that filesystem was not marked dirty when remounting it\n HPFS: Restrict uid and gid to 16-bit values\n HPFS: When marking or clearing the dirty bit, sync the filesystem\n HPFS: Use types with defined width\n HPFS: Remove mark_inode_dirty\n HPFS: Remove CR/LF conversion option\n HPFS: Remove remaining locks\n HPFS: Introduce a global mutex and lock it on every callback from VFS.\n HPFS: Make HPFS compile on preempt and SMP\n" }, { "commit": "88f4e9e870c01452e57a6943c04c8d62f6a0a7a6", "tree": "1f030c5d6b0e3ae9382ba7a81548d70f6022e68f", "parents": [ "c3514817445a5a5e6c0d0c8152f5f161a98001db" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:44:46 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:24 2011 -0700" }, "message": "HPFS: Remove unused variable\n\nRemove unused variable\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c3514817445a5a5e6c0d0c8152f5f161a98001db", "tree": "69202861416e03f5c9a691355bbcc6ec97befd88", "parents": [ "d0969d1949cc67a0f100f30ad69ec7ec1eca70d2" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:44:38 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:24 2011 -0700" }, "message": "HPFS: Move declaration up, so that there are no out-of-scope pointers\n\nMove declaration up, so that there are no out-of-scope pointers\n\nReported-by: Jesper Juhl \u003cjj@chaosbits.net\u003e\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "d0969d1949cc67a0f100f30ad69ec7ec1eca70d2", "tree": "70b04ebba74aff1c4df3e8cc213a7be721550fe8", "parents": [ "0b69760be6968c528869d4aec95ecf64dbf3e8bd" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:44:32 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:24 2011 -0700" }, "message": "HPFS: Fix some unaligned accesses\n\nFix some unaligned accesses\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0b69760be6968c528869d4aec95ecf64dbf3e8bd", "tree": "ebc1f353c7df72bfe28b9da64af810c20ca8cdd4", "parents": [ "bc8728ee56bca62df269b2dd159bc60838ac8e80" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:44:26 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:24 2011 -0700" }, "message": "HPFS: Fix endianity. Make hpfs work on big-endian machines\n\nFix endianity. Make hpfs work on big-endian machines.\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "bc8728ee56bca62df269b2dd159bc60838ac8e80", "tree": "d750d7366d6415746dd9ac1f61e7da57177138c3", "parents": [ "dab4c82a6e7ee2c60e63737eaa2ec283f9784df6" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:44:19 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:24 2011 -0700" }, "message": "HPFS: Implement fsync for hpfs\n\nImplement fsync for hpfs.\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "dab4c82a6e7ee2c60e63737eaa2ec283f9784df6", "tree": "27f33c66d2d4b20ae8f353e9b6e10daac4dc308a", "parents": [ "48f10e8ce7461b393186c4c7c6d6f6634082159c" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:44:08 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:24 2011 -0700" }, "message": "HPFS: Fix a bug that filesystem was not marked dirty when remounting it\n\nFix a bug that filesystem was not marked dirty when remounting it\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "48f10e8ce7461b393186c4c7c6d6f6634082159c", "tree": "3365f32b68e207b4961452eff2030c811950811f", "parents": [ "f73976818adeaa46515a238b21e865850b011a87" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:44:00 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:24 2011 -0700" }, "message": "HPFS: Restrict uid and gid to 16-bit values\n\nRestrict uid and gid to 16-bit values.\n\nHPFS stores only 2 bytes in the EAs.\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f73976818adeaa46515a238b21e865850b011a87", "tree": "0039a4bf88de3416c47b299b385f89e8850e3439", "parents": [ "d878597c2c498b63abe3e68d343459944bc358f9" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:43:41 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:24 2011 -0700" }, "message": "HPFS: When marking or clearing the dirty bit, sync the filesystem\n\nWhen marking or clearing the dirty bit, sync the filesystem\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "d878597c2c498b63abe3e68d343459944bc358f9", "tree": "a0347439303415ad48019af06feb98019748d7a5", "parents": [ "e5d6a7dd5e0b29eee4359e817e0bee728d7c5530" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:43:34 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:23 2011 -0700" }, "message": "HPFS: Use types with defined width\n\nUse types with defined width\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e5d6a7dd5e0b29eee4359e817e0bee728d7c5530", "tree": "3bc7f48840f1a8b25ddf76955b2cc5c10a3f8367", "parents": [ "0fe105aa29bed0994991462b58ef61646db0e459" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:43:27 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:23 2011 -0700" }, "message": "HPFS: Remove mark_inode_dirty\n\nRemove mark_inode_dirty\n\nHPFS doesn\u0027t use kernel\u0027s dirty inode indicator anyway because\nwriting an inode requires directory\u0027s mutex.\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0fe105aa29bed0994991462b58ef61646db0e459", "tree": "1aa775e43ff3181c67915a1522ab9ec8f1e62552", "parents": [ "7d23ce36e3f52f9b83ac8da49296b73339c8b5b8" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:43:19 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:23 2011 -0700" }, "message": "HPFS: Remove CR/LF conversion option\n\nRemove CR/LF conversion option\n\nIt is unused anyway. It was used on 2.2 kernels or so.\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7d23ce36e3f52f9b83ac8da49296b73339c8b5b8", "tree": "0c3973efa632e3c58d056c5d949a38b4c475193f", "parents": [ "7dd29d8d865efdb00c0542a5d2c87af8c52ea6c7" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:43:06 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:23 2011 -0700" }, "message": "HPFS: Remove remaining locks\n\nRemove remaining locks\n\nBecause of a new global per-fs lock, no other locks are needed\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7dd29d8d865efdb00c0542a5d2c87af8c52ea6c7", "tree": "71f404ed317e2d1b689af088ece1c32c3b1535c8", "parents": [ "637b424bf8747e50bab6648ab919632d6efd6c28" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:42:54 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:23 2011 -0700" }, "message": "HPFS: Introduce a global mutex and lock it on every callback from VFS.\n\nIntroduce a global mutex and lock it on every callback from VFS.\n\nPerformance doesn\u0027t matter, reviewing the whole code for locking correctness\nwould be too complicated, so simply lock it all.\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "637b424bf8747e50bab6648ab919632d6efd6c28", "tree": "a852ccbdfcd4120a80985652eb8a8ad5d1d2b4be", "parents": [ "0ee5623f9a6e52df90a78bd21179f8ab370e102e" ], "author": { "name": "Mikulas Patocka", "email": "mikulas@artax.karlin.mff.cuni.cz", "time": "Sun May 08 20:42:44 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 09 09:04:23 2011 -0700" }, "message": "HPFS: Make HPFS compile on preempt and SMP\n\nMake HPFS compile on preempt and SMP\n\nSigned-off-by: Mikulas Patocka \u003cmikulas@artax.karlin.mff.cuni.cz\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "14fdb152416c0fab80ecddf492c129d7da1bb8ef", "tree": "360f8a21c47af38edaf05b778a7dba23481e6215", "parents": [ "62d2f23e8bce3e7da4db53928e810fc8a474ce70" ], "author": { "name": "Matthew Garrett", "email": "mjg@redhat.com", "time": "Mon May 09 10:44:01 2011 -0400" }, "committer": { "name": "Matthew Garrett", "email": "mjg@redhat.com", "time": "Mon May 09 10:48:47 2011 -0400" }, "message": "eeepc-laptop: Use ACPI handle to identify rfkill port\n\nThe ACPI notification we get from rfkill events on these machines gives\nus all the information we need to identify the port that\u0027s changed. Do\nso rather than assuming that it\u0027s always bus 1.\n\nSigned-off-by: Matthew Garrett \u003cmjg@redhat.com\u003e\n" }, { "commit": "62d2f23e8bce3e7da4db53928e810fc8a474ce70", "tree": "5f463c8a917131bd38e51bc585aec253e3ba0862", "parents": [ "6192fa7109fb33591fa1078c8c1981e39da02d2d" ], "author": { "name": "Mattia Dongili", "email": "malattia@linux.it", "time": "Mon May 09 10:20:29 2011 -0400" }, "committer": { "name": "Matthew Garrett", "email": "mjg@redhat.com", "time": "Mon May 09 10:28:47 2011 -0400" }, "message": "[PATCH] sony-laptop: limit brightness range to DSDT provided ones\n\nThe new style brightness control provides an operating range of 9 values\n(seems consistent over a large number of models sharing the same\nbrightness control methods).\nRead and use the minimum and maximum values to limit the backlight\ninterface between those boundaries.\n\nSigned-off-by: Mattia Dongili \u003cmalattia@linux.it\u003e\nSigned-off-by: Matthew Garrett \u003cmjg@redhat.com\u003e\n" }, { "commit": "6192fa7109fb33591fa1078c8c1981e39da02d2d", "tree": "d7fb75fcf18338d55316170f05e59f1980e5b134", "parents": [ "9fbdaeb4f4dd14a0caa9fc35c496d5440c251a3a" ], "author": { "name": "Mattia Dongili", "email": "malattia@linux.it", "time": "Tue Apr 05 23:38:36 2011 +0900" }, "committer": { "name": "Matthew Garrett", "email": "mjg@redhat.com", "time": "Mon May 09 10:26:44 2011 -0400" }, "message": "sony-laptop: report failures on setting LCD brightness\n\nCheck if we were successful in setting the requested brightness and\nreport failure in that case.\n\nSigned-off-by: Mattia Dongili \u003cmalattia@linux.it\u003e\nSigned-off-by: Matthew Garrett \u003cmjg@redhat.com\u003e\n" }, { "commit": "9fbdaeb4f4dd14a0caa9fc35c496d5440c251a3a", "tree": "465f9c81e13a1bfffe2583726e3ecfb3a36ca9e1", "parents": [ "8b061610dac3a3b89770c85ad63b481a47b0c38e" ], "author": { "name": "Manoj Iyer", "email": "manoj.iyer@canonical.com", "time": "Sun May 08 18:04:29 2011 -0400" }, "committer": { "name": "Matthew Garrett", "email": "mjg@redhat.com", "time": "Mon May 09 10:25:13 2011 -0400" }, "message": "thinkpad-acpi: module autoloading for newer Lenovo ThinkPads.\n\nThe newer Lenovo ThinkPads have HKEY HID of LEN0068 instead\nof IBM0068. Added new HID so that thinkpad_acpi module will\nauto load on these newer Lenovo ThinkPads.\n\nAcked-by: Henrique de Moraes Holschuh \u003chmh@hmh.eng.br\u003e\nCc: stable@kernel.org\nSigned-off-by: Manoj Iyer \u003cmanoj.iyer@canonical.com\u003e\nSigned-off-by: Andy Lutomirski \u003cluto@mit.edu\u003e\nSigned-off-by: Matthew Garrett \u003cmjg@redhat.com\u003e\n" }, { "commit": "4f87af46107499415afd238be104587b5a9d7ac3", "tree": "7f94f42cac2671efbd6b8b636401041e67792602", "parents": [ "45e5f6a2ee6aac20e393d44f8a6762104426c81b" ], "author": { "name": "Alex Deucher", "email": "alexdeucher@gmail.com", "time": "Wed May 04 11:41:47 2011 -0400" }, "committer": { "name": "Dave Airlie", "email": "airlied@redhat.com", "time": "Mon May 09 09:16:38 2011 +1000" }, "message": "drm/radeon/kms: add pci id to acer travelmate quirk for 5730\n\nFixes:\nhttps://bugzilla.kernel.org/show_bug.cgi?id\u003d34082\n\nReported by: Sampo Laaksonen \u003czhamahn@gmail.com\u003e\nSigned-off-by: Alex Deucher \u003calexdeucher@gmail.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Dave Airlie \u003cairlied@redhat.com\u003e\n" }, { "commit": "45e5f6a2ee6aac20e393d44f8a6762104426c81b", "tree": "fb607aaa76c95ffc1e7b540063f91972844e185c", "parents": [ "2bbd4492552867053b5a618a2474297e2b1c355d" ], "author": { "name": "Ilija Hadzic", "email": "ihadzic@research.bell-labs.com", "time": "Wed May 04 20:15:03 2011 -0400" }, "committer": { "name": "Dave Airlie", "email": "airlied@redhat.com", "time": "Mon May 09 09:16:05 2011 +1000" }, "message": "drm/radeon: fix order of doing things in radeon_crtc_cursor_set\n\n if object pin or object lookup in radeon_cursor_set fail, the function\n could leave inconsistent mouse width and hight values in radeon_crtc\n fixed by moving cursor width and height assignments after all\n checks have passed\n\nSigned-off-by: Ilija Hadzic \u003cihadzic@research.bell-labs.com\u003e\nReviewed-by: Alex Deucher \u003calexdeucher@gmail.com\u003e\nSigned-off-by: Dave Airlie \u003cairlied@redhat.com\u003e\n" }, { "commit": "2bbd4492552867053b5a618a2474297e2b1c355d", "tree": "13f6e611009a3175af2aeebecb5a1d65cf3cd205", "parents": [ "ff68146acb98b689947692bffd38ec4ad67eb1cb" ], "author": { "name": "Daniel Vetter", "email": "daniel.vetter@ffwll.ch", "time": "Fri May 06 23:47:53 2011 +0200" }, "committer": { "name": "Dave Airlie", "email": "airlied@redhat.com", "time": "Mon May 09 09:14:45 2011 +1000" }, "message": "drm: mm: fix debug output\n\nThe looping helper didn\u0027t do anything due to a superficial\nsemicolon. Furthermore one of the two dump functions suffered\nfrom copy\u0026paste fail.\n\nWhile staring at the code I\u0027ve also noticed that the replace\nhelper (currently unused) is a bit broken.\n\nSigned-off-by: Daniel Vetter \u003cdaniel.vetter@ffwll.ch\u003e\nSigned-off-by: Dave Airlie \u003cairlied@redhat.com\u003e\n" }, { "commit": "ff68146acb98b689947692bffd38ec4ad67eb1cb", "tree": "76e5b8e196f595f14c5b4b6fd412b2cbd03a0d5e", "parents": [ "58e73811c85d0c0e74b8d300547bbc9abaf40a38", "7a7b94ad8ce3e24d4dd97b45583911e0f03aecd6" ], "author": { "name": "Dave Airlie", "email": "airlied@redhat.com", "time": "Mon May 09 09:14:38 2011 +1000" }, "committer": { "name": "Dave Airlie", "email": "airlied@redhat.com", "time": "Mon May 09 09:14:38 2011 +1000" }, "message": "Merge remote branch \u0027nouveau/drm-nouveau-fixes\u0027 of /ssd/git/drm-nouveau-next into drm-fixes\n\n* \u0027nouveau/drm-nouveau-fixes\u0027 of /ssd/git/drm-nouveau-next:\n drm/nouveau: Fix a crash at card takedown for NV40 and older cards\n" }, { "commit": "58e73811c85d0c0e74b8d300547bbc9abaf40a38", "tree": "74e3960d53b2c3ac4a4d93ca6853ab6fbe1feb11", "parents": [ "8aeb96f80232e9a701b5c4715504f4c9173978bd" ], "author": { "name": "Alex Deucher", "email": "alexdeucher@gmail.com", "time": "Fri May 06 01:42:49 2011 -0400" }, "committer": { "name": "Dave Airlie", "email": "airlied@redhat.com", "time": "Mon May 09 09:14:35 2011 +1000" }, "message": "drm/radeon/kms: ATPX switcheroo fixes\n\nWhen we switch the display mux, also switch\nthe i2c mux. Also use the start and finish\nmethods to let the sbios know that the switch\nis happening.\n\nShould fix:\nhttps://bugs.freedesktop.org/show_bug.cgi?id\u003d35398\n\nSigned-off-by: Alex Deucher \u003calexdeucher@gmail.com\u003e\nSigned-off-by: Dave Airlie \u003cairlied@redhat.com\u003e\n" }, { "commit": "7a7b94ad8ce3e24d4dd97b45583911e0f03aecd6", "tree": "9f9c6ebd78c2d7c008cc194fe3e0e631a3d97270", "parents": [ "8aeb96f80232e9a701b5c4715504f4c9173978bd" ], "author": { "name": "Jimmy Rentz", "email": "jb17bsome@gmail.com", "time": "Sun Apr 17 16:15:09 2011 -0400" }, "committer": { "name": "Ben Skeggs", "email": "bskeggs@redhat.com", "time": "Mon May 09 08:42:49 2011 +1000" }, "message": "drm/nouveau: Fix a crash at card takedown for NV40 and older cards\n\nNV40 and older cards (pre NV50) reserve a vram bo for the vga memory at\ncard init. This bo is then freed at card shutdown. The problem is that\nthe ttm bo vram manager was already freed. So a crash occurs when the\nvga bo is freed. The fix is to free the vga bo prior to freeing the ttm\nbo vram manager. There might be other solutions but this seemed the\nsimplest to me.\n\nSigned-off-by: Jimmy Rentz \u003cjb17bsome@gmail.com\u003e\nSigned-off-by: Ben Skeggs \u003cbskeggs@redhat.com\u003e\n" }, { "commit": "8b061610dac3a3b89770c85ad63b481a47b0c38e", "tree": "3ab93ad7f8f3e8bd612cff4e59d55d5a36c0c1fa", "parents": [ "c2bf807eb347325988b1c7f9139e934ed9b1d795", "174a7b1f9692acad7f0ca2b02f696894201a6d94" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 07 13:17:37 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 07 13:17:37 2011 -0700" }, "message": "Merge branch \u0027perf-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027perf-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n perf tools: Makefile: Use gcc to determine ARCH\n perf events, x86: Fix Intel Nehalem and Westmere last level cache event definitions\n hw_breakpoints, powerpc: Fix CONFIG_HAVE_HW_BREAKPOINT off-case in ptrace_set_debugreg()\n sh, hw_breakpoints: Fix racy access to ptrace breakpoints\n arm, hw_breakpoints: Fix racy access to ptrace breakpoints\n powerpc, hw_breakpoints: Fix racy access to ptrace breakpoints\n x86, hw_breakpoints: Fix racy access to ptrace breakpoints\n ptrace: Prepare to fix racy accesses on task breakpoints\n" }, { "commit": "174a7b1f9692acad7f0ca2b02f696894201a6d94", "tree": "cb952b7d4fc8de1fe0af01e44992e3245818de81", "parents": [ "63b6a6758eede2f9283c3594265b6e32e75d7456" ], "author": { "name": "Lin Ming", "email": "ming.m.lin@intel.com", "time": "Sat May 07 12:41:14 2011 +0800" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Sat May 07 11:40:59 2011 +0200" }, "message": "perf tools: Makefile: Use gcc to determine ARCH\n\nThe original Makefile uses \"uname -m\" to determine ARCH.\nThis causes problem on x86 when compile perf tool on 32 bit\nuserspace with a 64 bit kernel.\n\n bench/../../../arch/x86/lib/memcpy_64.S: Assembler messages:\n bench/../../../arch/x86/lib/memcpy_64.S:28: Error: bad register name `%rdi\u0027\n\nThis is because \"uname -m\" returns x86_64 and memcpy_64.S is\nincluded in 32 bit build.\n\nReported-by: Riccardo Magliocchetti \u003criccardo.magliocchetti@gmail.com\u003e\nSigned-off-by: Lin Ming \u003cming.m.lin@intel.com\u003e\nCc: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Arnaldo Carvalho de Melo \u003cacme@infradead.org\u003e\nLink: http://lkml.kernel.org/r/1304743274.3132.17.camel@localhost\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "c2bf807eb347325988b1c7f9139e934ed9b1d795", "tree": "3b35c66365a3a5e2d10183d05a014d8e26196e6c", "parents": [ "a3a4a5acd3bd2f6f1e102e1f1b9d2e2bb320a7fd", "16541ba11c4f04ffe94b073e301f00b749fb84a1" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 06 15:32:41 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 06 15:32:41 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:\n cifs: handle errors from coalesce_t2\n cifs: refactor mid finding loop in cifs_demultiplex_thread\n cifs: sanitize length checking in coalesce_t2 (try #3)\n cifs: check for bytes_remaining going to zero in CIFS_SessSetup\n cifs: change bleft in decode_unicode_ssetup back to signed type\n" }, { "commit": "a3a4a5acd3bd2f6f1e102e1f1b9d2e2bb320a7fd", "tree": "8ed40e1c0bb654d824e39e6b42d1619a2807e75d", "parents": [ "e5e06985bec89414ce2b3f301c24d884f609b020" ], "author": { "name": "Arjan van de Ven", "email": "arjan@linux.intel.com", "time": "Thu May 05 23:55:18 2011 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 06 13:20:59 2011 -0700" }, "message": "Regression: partial revert \"tracing: Remove lock_depth from event entry\"\n\nThis partially reverts commit e6e1e2593592a8f6f6380496655d8c6f67431266.\n\nThat commit changed the structure layout of the trace structure, which\nin turn broke PowerTOP (1.9x generation) quite badly.\n\nI appreciate not wanting to expose the variable in question, and\nPowerTOP was not using it, so I\u0027ve replaced the variable with just a\npadding field - that way if in the future a new field is needed it can\njust use this padding field.\n\nSigned-off-by: Arjan van de Ven \u003carjan@linux.intel.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e5e06985bec89414ce2b3f301c24d884f609b020", "tree": "da702c3e4facd0b41faaba34ea98aa3556ce525a", "parents": [ "fa039d5f6b126fbd65eefa05db2f67e44df8f121", "c055f5b2614b4f758ae6cc86733f31fa4c2c5844" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 06 10:01:54 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 06 10:01:54 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:\n [SCSI] fix oops in scsi_run_queue()\n" }, { "commit": "fa039d5f6b126fbd65eefa05db2f67e44df8f121", "tree": "bfd1fcc3bca88d6d43650a76575b04c21c2d2c24", "parents": [ "bfd412db9e7b0d8f7b9c09d12d07aa2ac785f1d0" ], "author": { "name": "Timo Warns", "email": "Warns@pre-sense.de", "time": "Fri May 06 13:47:35 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 06 07:46:37 2011 -0700" }, "message": "Validate size of EFI GUID partition entries.\n\nOtherwise corrupted EFI partition tables can cause total confusion.\n\nSigned-off-by: Timo Warns \u003cwarns@pre-sense.de\u003e\nCc: stable@kernel.org\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "63b6a6758eede2f9283c3594265b6e32e75d7456", "tree": "f57561ee0ae40e084dea56ba79439e563071a9d9", "parents": [ "925f83c085e1bb08435556c5b4844a60de002e31" ], "author": { "name": "Peter Zijlstra", "email": "peterz@infradead.org", "time": "Sat Apr 23 00:57:42 2011 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri May 06 11:24:48 2011 +0200" }, "message": "perf events, x86: Fix Intel Nehalem and Westmere last level cache event definitions\n\nThe Intel Nehalem offcore bits implemented in:\n\n e994d7d23a0b: perf: Fix LLC-* events on Intel Nehalem/Westmere\n\n... are wrong: they implemented _ACCESS as _HIT and counted OTHER_CORE_HIT* as\nMISS even though its clearly documented as an L3 hit ...\n\nFix them and the Westmere definitions as well.\n\nCc: Andi Kleen \u003cak@linux.intel.com\u003e\nCc: Lin Ming \u003cming.m.lin@intel.com\u003e\nCc: Arnaldo Carvalho de Melo \u003cacme@redhat.com\u003e\nCc: Frederic Weisbecker \u003cfweisbec@gmail.com\u003e\nCc: Mike Galbraith \u003cefault@gmx.de\u003e\nCc: Steven Rostedt \u003crostedt@goodmis.org\u003e\nLink: http://lkml.kernel.org/r/1299119690-13991-3-git-send-email-ming.m.lin@intel.com\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "925f83c085e1bb08435556c5b4844a60de002e31", "tree": "602baa644c8c626fcc942baed9ae86534d715a0d", "parents": [ "4d70230bb46859df6295744f7dcf8c560f01fb8f" ], "author": { "name": "Frederic Weisbecker", "email": "fweisbec@gmail.com", "time": "Fri May 06 01:53:18 2011 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri May 06 11:24:46 2011 +0200" }, "message": "hw_breakpoints, powerpc: Fix CONFIG_HAVE_HW_BREAKPOINT off-case in ptrace_set_debugreg()\n\nWe make use of ptrace_get_breakpoints() / ptrace_put_breakpoints() to\nprotect ptrace_set_debugreg() even if CONFIG_HAVE_HW_BREAKPOINT if off.\nHowever in this case, these APIs are not implemented.\n\nTo fix this, push the protection down inside the relevant ifdef.\nBest would be to export the code inside\nCONFIG_HAVE_HW_BREAKPOINT into a standalone function to cleanup\nthe ifdefury there and call the breakpoint ref API inside. But\nas it is more invasive, this should be rather made in an -rc1.\n\nFixes this build error:\n\n arch/powerpc/kernel/ptrace.c:1594: error: implicit declaration of function \u0027ptrace_get_breakpoints\u0027 make[2]: ***\n\nReported-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Frederic Weisbecker \u003cfweisbec@gmail.com\u003e\nCc: LPPC \u003clinuxppc-dev@lists.ozlabs.org\u003e\nCc: Prasad \u003cprasad@linux.vnet.ibm.com\u003e\nCc: v2.6.33.. \u003cstable@kernel.org\u003e\nLink: http://lkml.kernel.org/r/1304639598-4707-1-git-send-email-fweisbec@gmail.com\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "4d70230bb46859df6295744f7dcf8c560f01fb8f", "tree": "a5b0f219c2f90365136a00b555fdd4fcc07ed3bf", "parents": [ "98bb318864ed10ae374573f1382147f113642059", "bfd412db9e7b0d8f7b9c09d12d07aa2ac785f1d0" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri May 06 08:11:28 2011 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri May 06 08:11:28 2011 +0200" }, "message": "Merge branch \u0027master\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into perf/urgent\n" }, { "commit": "bfd412db9e7b0d8f7b9c09d12d07aa2ac785f1d0", "tree": "3eacbc74953999bc57137f04333bf94e7a052823", "parents": [ "a1fde08c74e90accd62d4cfdbf580d2ede938fe7", "9baeb7e47aed8e399d15d2ea8c032efe3680f20b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 05 21:27:57 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 05 21:27:57 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://github.com/at91linux/linux-2.6-at91\n\n* \u0027for-linus\u0027 of git://github.com/at91linux/linux-2.6-at91:\n at91: Add ARCH_ID and basic cpu macros definition for 5series chips family.\n arm: at91: fix compiler warning for eb01 board build\n arm: at91: minimal defconfig for at91x40 SoC\n ARM: at91: AT91CAP9 has a macb device\n" }, { "commit": "a1fde08c74e90accd62d4cfdbf580d2ede938fe7", "tree": "bdf58078fd37484729e350acb066dc1b1fa890ee", "parents": [ "5895198c56d131cc696556a45f7ff0ea99ac297b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 21:30:28 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 21:30:28 2011 -0700" }, "message": "VM: skip the stack guard page lookup in get_user_pages only for mlock\n\nThe logic in __get_user_pages() used to skip the stack guard page lookup\nwhenever the caller wasn\u0027t interested in seeing what the actual page\nwas. But Michel Lespinasse points out that there are cases where we\ndon\u0027t care about the physical page itself (so \u0027pages\u0027 may be NULL), but\ndo want to make sure a page is mapped into the virtual address space.\n\nSo using the existence of the \"pages\" array as an indication of whether\nto look up the guard page or not isn\u0027t actually so great, and we really\nshould just use the FOLL_MLOCK bit. But because that bit was only set\nfor the VM_LOCKED case (and not all vma\u0027s necessarily have it, even for\nmlock()), we couldn\u0027t do that originally.\n\nFix that by moving the VM_LOCKED check deeper into the call-chain, which\nactually simplifies many things. Now mlock() gets simpler, and we can\nalso check for FOLL_MLOCK in __get_user_pages() and the code ends up\nmuch more straightforward.\n\nReported-and-reviewed-by: Michel Lespinasse \u003cwalken@google.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "5895198c56d131cc696556a45f7ff0ea99ac297b", "tree": "26b98358ece87f30b8788603fee48bc9a3a71728", "parents": [ "0ecb063a2976b62d5eaecbd5a70bb994fe4b5a8a", "9005fcd89c24f2a0fa6f87588b9208aae6d4d6cd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:23:41 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:23:41 2011 -0700" }, "message": "Merge branch \u0027staging-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6\n\n* \u0027staging-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:\n staging: Remove a warning for drivers/staging/wlan-ng/cfg80211.c\n staging: intel_sst: intelmid needs delay.h\n staging: solo6x10: add select SND_PCM to fix build error\n staging: usbip: vhci: fix oops on subsequent attach\n staging: ft1000: Remove unnecessary EXPORT_SYMBOLs\n staging: rts_pstor: use #ifdef instead of #if\n staging: rts_pstor: Add \u003clinux/vmalloc.h\u003e\n staging: gma500: Depend on X86\n staging: olpc: Add \u003clinux/delay.h\u003e\n" }, { "commit": "0ecb063a2976b62d5eaecbd5a70bb994fe4b5a8a", "tree": "2b599cd66f1747d4e246d906b0e240ffd7ed0263", "parents": [ "bd355f8ae6577aa6b444ab76bb1dfeb1a7002d9f", "4f0871a6c7811a433513c3788a7cce27033bb8b8" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:22:53 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:22:53 2011 -0700" }, "message": "Merge branch \u0027usb-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6\n\n* \u0027usb-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:\n xHCI: Clear PLC in xhci_bus_resume()\n USB: fix regression in usbip by setting has_tt flag\n usb/isp1760: Report correct urb status after unlink\n omap:usb: add regulator support for EHCI\n mfd: Fix usbhs_enable error handling\n usb: musb: gadget: Fix out-of-sync runtime pm calls\n usb: musb: omap2430: Fix retention idle on musb peripheral only boards\n" }, { "commit": "bd355f8ae6577aa6b444ab76bb1dfeb1a7002d9f", "tree": "b88b57915ccc335cb1391abf3da5fa59bd5e6ac5", "parents": [ "1c08232cfe5e68c6234305a3abb64d52d89c9ead", "fca65b4ad72d28cbb43a029114d04b89f06faadb" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:22:20 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:22:20 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:\n ceph: do not call __mark_dirty_inode under i_lock\n libceph: fix ceph_osdc_alloc_request error checks\n ceph: handle ceph_osdc_new_request failure in ceph_writepages_start\n libceph: fix ceph_msg_new error path\n ceph: use ihold() when i_lock is held\n" }, { "commit": "1c08232cfe5e68c6234305a3abb64d52d89c9ead", "tree": "ffba8b76685d26e719c20591e7b2b04468dd8507", "parents": [ "8db72a7d7268630e04ec285fbd3e90733b2eddf9", "b730011061e2805a46b7291e708b6caaf2be6869" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:22:04 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:22:04 2011 -0700" }, "message": "Merge branch \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6\n\n* \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:\n [media] ngene: Fix CI data transfer regression Fix CI data transfer regression introduced by previous cleanup.\n [media] v4l: make sure drivers supply a zeroed struct v4l2_subdev\n [media] Missing frontend config for LME DM04/QQBOX\n [media] rc_core: avoid kernel oops when rmmod saa7134\n [media] imon: add conditional locking in change_protocol\n [media] rc: show RC_TYPE_OTHER in sysfs\n [media] ite-cir: modular build on ppc requires delay.h include\n [media] mceusb: add Dell transceiver ID\n" }, { "commit": "8db72a7d7268630e04ec285fbd3e90733b2eddf9", "tree": "bb41f5ce688f9595b5734b02c48ef53d2cc067bd", "parents": [ "8a3d8ed027b563d2875cd3df816fb4a888a8551e", "2e053a27d9d5ad5e0831e002cbf8043836fb2060" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:21:39 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:21:39 2011 -0700" }, "message": "Merge branch \u0027fixes\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6\n\n* \u0027fixes\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:\n firewire: Fix for broken configrom updates in quick succession\n" }, { "commit": "8a3d8ed027b563d2875cd3df816fb4a888a8551e", "tree": "61b5174933a53e7ec6246369c558fcb60e7967d8", "parents": [ "30106b8ce2cc2243514116d6f29086e6deecc754", "6f239284542bae297d27355d06afbb8df23c5db9" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:21:08 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:21:08 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:\n flex_arrays: allow zero length flex arrays\n flex_array: flex_array_prealloc takes a number of elements, not an end\n SELinux: pass last path component in may_create\n" }, { "commit": "30106b8ce2cc2243514116d6f29086e6deecc754", "tree": "a2fe06bb2b47a508eaa38680112066bb2eb0bb6b", "parents": [ "0ee5623f9a6e52df90a78bd21179f8ab370e102e" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Wed May 04 15:38:19 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 04 14:20:20 2011 -0700" }, "message": "slub: Fix the lockless code on 32-bit platforms with no 64-bit cmpxchg\n\nThe SLUB allocator use of the cmpxchg_double logic was wrong: it\nactually needs the irq-safe one.\n\nThat happens automatically when we use the native unlocked \u0027cmpxchg8b\u0027\ninstruction, but when compiling the kernel for older x86 CPUs that do\nnot support that instruction, we fall back to the generic emulation\ncode.\n\nAnd if you don\u0027t specify that you want the irq-safe version, the generic\ncode ends up just open-coding the cmpxchg8b equivalent without any\nprotection against interrupts or preemption. Which definitely doesn\u0027t\nwork for SLUB.\n\nThis was reported by Werner Landgraf \u003cw.landgraf@ru.ru\u003e, who saw\ninstability with his distro-kernel that was compiled to support pretty\nmuch everything under the sun. Most big Linux distributions tend to\ncompile for PPro and later, and would never have noticed this problem.\n\nThis also fixes the prototypes for the irqsafe cmpxchg_double functions\nto use \u0027bool\u0027 like they should.\n\n[ Btw, that whole \"generic code defaults to no protection\" design just\n sounds stupid - if the code needs no protection, there is no reason to\n use \"cmpxchg_double\" to begin with. So we should probably just remove\n the unprotected version entirely as pointless. - Linus ]\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nReported-and-tested-by: werner \u003cw.landgraf@ru.ru\u003e\nAcked-and-tested-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nAcked-by: Christoph Lameter \u003ccl@linux.com\u003e\nCc: Pekka Enberg \u003cpenberg@kernel.org\u003e\nCc: Jens Axboe \u003caxboe@kernel.dk\u003e\nCc: Tejun Heo \u003ctj@kernel.org\u003e\nLink: http://lkml.kernel.org/r/alpine.LFD.2.02.1105041539050.3005@ionos\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "fca65b4ad72d28cbb43a029114d04b89f06faadb", "tree": "af7a0d64fa632c45a064d49f8d09f6874b1f7533", "parents": [ "4ad12621e442b7a072e81270808f617cb65c5672" ], "author": { "name": "Sage Weil", "email": "sage@newdream.net", "time": "Wed May 04 11:33:47 2011 -0700" }, "committer": { "name": "Sage Weil", "email": "sage@newdream.net", "time": "Wed May 04 12:56:45 2011 -0700" }, "message": "ceph: do not call __mark_dirty_inode under i_lock\n\nThe __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the\none ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the\nflags value so that the callers can do it outside of i_lock.\n\nSigned-off-by: Sage Weil \u003csage@newdream.net\u003e\n" }, { "commit": "31acbcc408f412d1ba73765b846c38642be553c3", "tree": "6a1f340e21b0c24d067eccbc369c1d96098e6ffc", "parents": [ "2dd251f0a294300a1cf8f4b63768145fa6153c4d" ], "author": { "name": "Chris Wilson", "email": "chris@chris-wilson.co.uk", "time": "Sun Apr 17 06:38:35 2011 +0100" }, "committer": { "name": "Keith Packard", "email": "keithp@keithp.com", "time": "Wed May 04 12:38:02 2011 -0700" }, "message": "drm/i915/dp: Be paranoid in case we disable a DP before it is attached\n\nGiven that the hardware may be left in a random condition by the BIOS,\nit is conceivable that we then attempt to clear the DP_PIPEB_SELECT bit\nwithout us ever enabling/attaching the DP encoder to a pipe. Thus\ncausing a NULL deference when we attempt to wait for a vblank on that\ncrtc.\n\nReported-and-tested-by: Bryan Christ \u003cbryan.christ@gmail.com\u003e\nBugzilla: https://bugs.freedesktop.org/show_bug.cgi?id\u003d36314\nSigned-off-by: Chris Wilson \u003cchris@chris-wilson.co.uk\u003e\nBugzilla: https://bugs.freedesktop.org/show_bug.cgi?id\u003d36456\nReported-and-tested-by: Bo Wang \u003cbo.b.wang@intel.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Keith Packard \u003ckeithp@keithp.com\u003e\n" }, { "commit": "2dd251f0a294300a1cf8f4b63768145fa6153c4d", "tree": "0220bae157fa4e5b70ff8d86cfb92bd7d678c61e", "parents": [ "0ee5623f9a6e52df90a78bd21179f8ab370e102e" ], "author": { "name": "Chris Wilson", "email": "chris@chris-wilson.co.uk", "time": "Sat Apr 16 10:23:51 2011 +0100" }, "committer": { "name": "Keith Packard", "email": "keithp@keithp.com", "time": "Wed May 04 12:36:17 2011 -0700" }, "message": "drm/i915: Release object along create user fb error path\n\nReported-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Chris Wilson \u003cchris@chris-wilson.co.uk\u003e\nCc: stable@kernel.org\nSigned-off-by: Keith Packard \u003ckeithp@keithp.com\u003e\n" }, { "commit": "98bb318864ed10ae374573f1382147f113642059", "tree": "c1b45f1c6bedadfec2040446f5509257a7b12be2", "parents": [ "5933f2ae353a93b1d3b501bc63c925531849bbc7", "e0ac8457d020c0289ea566917267da9e5e6d9865" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed May 04 20:33:42 2011 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed May 04 20:33:42 2011 +0200" }, "message": "Merge branch \u0027perf/urgent\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent\n" } ], "next": "0ee5623f9a6e52df90a78bd21179f8ab370e102e" }