)]}'
{
  "log": [
    {
      "commit": "30bac7aa0e3678c79ff00fc9372f34712eeb34fc",
      "tree": "f15b6915b804b3d06e783e657c60bc96948ec283",
      "parents": [
        "d6ff5a8532b553e4d85ea65c99eaa0794edf5311"
      ],
      "author": {
        "name": "Petr Vandrovec",
        "email": "vandrove@vc.cvut.cz",
        "time": "Fri Feb 10 02:04:00 2006 -0800"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:27:07 2006 +0200"
      },
      "message": "[PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45\n\nThis ugly hack add support for Siemens MC45 PCMCIA GPRS card (which is\nidentical to Possio GCC, and which is offered by one of our local GPRS\nproviders).  Card has unfortunate feature that after poweron oxcf950 chip\nis fully powered and works, but attached MC45 modem is powered down :-(\nThere is a special sequence (which takes 1 sec :-( ) to poweron MC45 (and\nafter MC45 powers on, it takes more than 2 secs until firmware fully\nboots...) which needs to be executed after all powerons.\n\nI\u0027m really not familiar with PCMCIA subsystem, so I have no idea whether I\nshould issue request_region() on rest of oxcf950 address range (0-7 is\nUART, 8-F are special configuration registers), or how this should be\nbetter integrated with PM system and so on - I just put it in same place\nwhere another hack already lived...\n\nCard uses 18.432MHz XTAL, so to get it to work you must add lines below to\nthe /etc/pcmcia/serial.opts.\n\ncase \"$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4\" in\n\u0027030c,0003-2-GPRS-CARD--\u0027)\n    SERIAL_OPTS\u003d\"baud_base 1152000\"\n    ;;\nesac\n\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "159fe8a8358c7012d4f1fdacfcf69009ea15b52e",
      "tree": "a89d3f3c8beaf1801f3e0ade3b96aaaca2fe1709",
      "parents": [
        "8961b828667e715a96d9d8517f7c8b6552ead3bb"
      ],
      "author": {
        "name": "Komuro",
        "email": "komurojun-mbn@nifty.com",
        "time": "Sun Feb 05 09:56:59 2006 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:04:22 2006 +0200"
      },
      "message": "[PATCH] pcmcia: remove wrong comment in ciscode.h\n\nRemove misleading comment.\n\nSigned-off-by: Komuro \u003ckomurojun-mbn@nifty.com\u003e\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "f4d7510d3d3b4501c94b4b00cf42fd58d49aeddd",
      "tree": "f99fec0a68a7890a66da7a0c653d7375267abc1d",
      "parents": [
        "22f3a8f5fc94be4dd31c4c5ec1d1dc2b9c83a8ac"
      ],
      "author": {
        "name": "Jun Komuro",
        "email": "komurojun-mbn@nifty.com",
        "time": "Mon Jun 27 16:28:44 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Mon Jun 27 18:03:17 2005 -0700"
      },
      "message": "[PATCH] pcmcia: more IDs for TDK multifunction cards\n\nAdd new pcmcia id_table for fmvj18x_cs and serial_cs.\n(TDK multi-function card (NetPartner9610 and MobileNetworker3200))\n\nSigned-off-by: Jun Komuro \u003ckomurojun-mbn@nifty.com\u003e\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}