)]}' { "log": [ { "commit": "16caeb6dfbfe4aeadaa71d103e83d08c17db2e83", "tree": "43fe19cee6d6f375b946d509b10671569c40cf45", "parents": [ "3096371e8e95db2a5e17aeba32295ba3559e1efd", "63c61d6d8b8f37c71b4162b3affffdf72ac06811" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 01 05:13:46 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 01 05:13:46 2012 -0700" }, "message": "Merge \"mmc: block: Add write packing control\" into msm-3.0" }, { "commit": "88dc1cd9cf89ead1d830d94d197b8846026ec9e9", "tree": "83d9273fe0669c4211749c267b48d6b55221b3d5", "parents": [ "8edba5a4705115fc28434b39a7b538f803bf5af9", "4d99b5015ed7bccfcdada75e9c41d421ac344e76" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 01 05:13:36 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 01 05:13:36 2012 -0700" }, "message": "Merge \"ASOC: msm: Enable sound soc drivers for audio.\" into msm-3.0" }, { "commit": "afbf7c2c7ca528b55f36724e901b815d1c245d61", "tree": "1246b785914af34e97fb4d134c7383c776e536b7", "parents": [ "975960a0a467f106573742d5636d4916b3687c16", "c249b751531d3ca2f5506d083720571cb07fc453" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 01 03:24:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 01 03:24:26 2012 -0700" }, "message": "Merge \"msm: vidc: Add DIVX311 support\" into msm-3.0" }, { "commit": "22bee8bbfd25c51ce6d09ce45ef1f4f11101be73", "tree": "ce26e6e964bbb690f140bab87e0c989361db7fd9", "parents": [ "36dfbd85692744de74d981d886668b788315e879" ], "author": { "name": "Sriranjan Srikantam", "email": "cssrika@codeaurora.org", "time": "Thu May 31 15:21:53 2012 -0700" }, "committer": { "name": "Sriranjan Srikantam", "email": "cssrika@codeaurora.org", "time": "Thu May 31 19:28:21 2012 -0700" }, "message": "ASoC: msm: Add support to enable SRS feature on DSP\n\nAdd new mixer controls for setting SRS parameters which\nenables SRS on DSP. Add required structures and commands\nfor enabling SRS\n\nChange-Id: Ife0c8223c534dd3daad10dd5fec18630da732611\nSigned-off-by: Sriranjan Srikantam \u003ccssrika@codeaurora.org\u003e\n" }, { "commit": "c249b751531d3ca2f5506d083720571cb07fc453", "tree": "775ef2aa9e12706b6e1272f888451ab5b953a569", "parents": [ "e6480cf271557f7228338deb7cd2a7a7f3c28283" ], "author": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Fri May 18 17:31:03 2012 -0700" }, "committer": { "name": "repo sync -j 10", "email": "dramasub@codeaurora.org", "time": "Thu May 31 18:29:37 2012 -0700" }, "message": "msm: vidc: Add DIVX311 support\n\nImplement changes in the driver to support decoding of Divx311\nbitstreams\n\nChange-Id: Ie4e05c9161d89b866f9f36ca1865a9b64bc51240\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\n" }, { "commit": "4d99b5015ed7bccfcdada75e9c41d421ac344e76", "tree": "aec38129247473a50f02d0326d30264f7e0b151c", "parents": [ "2e3168f2b7c1efc95fc2f160cb5ef9b7d38319d5" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Fri May 04 18:52:52 2012 -0700" }, "committer": { "name": "Phani Kumar Uppalapati", "email": "phanik@codeaurora.org", "time": "Thu May 31 11:57:34 2012 -0700" }, "message": "ASOC: msm: Enable sound soc drivers for audio.\n\nEnabling alsa based sound soc audio drivers.\n\nChange-Id: I5158b6ddfb531f2f69ae677f7de82c82317aa20c\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "63c61d6d8b8f37c71b4162b3affffdf72ac06811", "tree": "fc926a9f42bba6b6722d3cb7819e5fd6ff42b53e", "parents": [ "2009fe63c80e1786495ebc96c32dddd1bf1e0485" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu May 31 21:00:18 2012 +0300" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu May 31 21:00:18 2012 +0300" }, "message": "mmc: block: Add write packing control\n\nThe write packing control will ensure that read requests latency is\nnot increased due to long write packed commands.\n\nThe trigger for enabling the write packing is managing to pack several\nwrite requests. The number of potential packed requests that will trigger\nthe packing can be configured via sysfs by writing the required value to:\n/sys/block/\u003cblock_dev_name\u003e/num_wr_reqs_to_start_packing.\nThe trigger for disabling the write packing is fetching a read request.\n\nChange-Id: I982170fa6dca9150ea4310bb546b838b7fd30e9b\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "6ac284ba3761fd464c19067c82a54202883387cd", "tree": "a5e296589a806290a30cdec8e2accb5f803a8728", "parents": [ "f6b82acb7cfcb5af5ecfbf5a9c7afac08ed27615", "85c95406680ce1a959a9b8cdb5aff7afcd699038" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:35:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:35:09 2012 -0700" }, "message": "Merge changes Idb51bf73,Ida0c539b into msm-3.0\n\n* changes:\n gpu: ion: Use standard cache routines\n msm: memory: Use standard cache routines\n" }, { "commit": "f6b82acb7cfcb5af5ecfbf5a9c7afac08ed27615", "tree": "7da87d46a0a337a784feb9503d17c6d55bc0dfd7", "parents": [ "cba6bf0b3725e9e28d4b9faeab01d905693a037a", "968c774ea6466fa7adbf2eac333220132acda306" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:35:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:35:04 2012 -0700" }, "message": "Merge \"mmc: core: Support packed write command for eMMC4.5 device\" into msm-3.0" }, { "commit": "f461abd8417b2f416ee9dfebef483c1450052398", "tree": "bfd270b66f2f521e4c1d6bb74990ebb95b3e081c", "parents": [ "1c4ca956f997c6c977ad577db79ef7c088fdc98b", "2e3168f2b7c1efc95fc2f160cb5ef9b7d38319d5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 03:38:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 03:38:25 2012 -0700" }, "message": "Merge \"ASOC: msm: Add native audio driver support.\" into msm-3.0" }, { "commit": "887d8ad7144bce3a223e75f170c6bb3c768a22fd", "tree": "29e93180a0006d91ba1f0dc4596ee32e87e3d9bb", "parents": [ "f42fbb404ace79deb192b7f24105ca0f63c97281", "5b1e6f1afb70ace03b32b48d4d70f34302decdc2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 03:38:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 03:38:15 2012 -0700" }, "message": "Merge \"msm: camera: Remove subsystem_map header\" into msm-3.0" }, { "commit": "4ecd5b8327d6fd02c88114227513bd8fcc2a3af8", "tree": "783dc0628cad68b61d88324a7783081fc72f14e9", "parents": [ "0e70397c592d662515ce345af2dfefc1b7440b4f", "2e1d752be81c1eee283738ffa21afb179ae1cc1d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 02:01:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 02:01:15 2012 -0700" }, "message": "Merge \"ASoC: wcd9304: Fix wrong sample rate issue in RX2/RX3 channels\" into msm-3.0" }, { "commit": "968c774ea6466fa7adbf2eac333220132acda306", "tree": "dd407c83e2143e44ce5ca7f87dde76bab3c1e7a1", "parents": [ "03bbfdade61daaa932abb4f2b998b9feb2380289" ], "author": { "name": "Seungwon Jeon", "email": "tgih.jun@samsung.com", "time": "Thu May 31 11:54:47 2012 +0300" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu May 31 11:54:53 2012 +0300" }, "message": "mmc: core: Support packed write command for eMMC4.5 device\n\nThis patch supports packed write command of eMMC4.5 device.\nSeveral writes can be grouped in packed command and all data\nof the individual commands can be sent in a single transfer\non the bus.\n\nChange-Id: I391c3e5f73b785a8b7d25eb8256051020cfb0631\nSigned-off-by: Seungwon Jeon \u003ctgih.jun@samsung.com\u003e\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "85c95406680ce1a959a9b8cdb5aff7afcd699038", "tree": "a0b137365fc1006b4c2a44809bd5a501ca8c4187", "parents": [ "29bb4d5fa7a285c8fb5d5db55225dab700b80419" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed May 30 17:32:37 2012 -0700" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed May 30 17:33:36 2012 -0700" }, "message": "gpu: ion: Use standard cache routines\n\nInstead of using custom routines for cache operations use the\nstandard operations for cache flush, cache clean, and cache\ninvalidate. In addition only call outer cache routines if\nouter cache is available.\n\nChange-Id: Idb51bf7348fd526ebdea1e6ff2e366b8a3b4de33\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "2e3168f2b7c1efc95fc2f160cb5ef9b7d38319d5", "tree": "bf6b4a70d6cc183cb53d8056405d4f29914d252a", "parents": [ "2dec7e975a31b837d98710f13f14bc6f1bab3dd5" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Thu May 03 16:29:09 2012 -0700" }, "committer": { "name": "Phani Kumar Uppalapati", "email": "phanik@codeaurora.org", "time": "Wed May 30 16:35:22 2012 -0700" }, "message": "ASOC: msm: Add native audio driver support.\n\nAdding native audio driver support for copper. This driver deals\nwith interfaces to DSP.\n\nChange-Id: I8ced9663f2e0ed486be7b2191efaf9e8b1d97f7f\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "2dec7e975a31b837d98710f13f14bc6f1bab3dd5", "tree": "b4df6f8e2d00a09f8b2c57f9e90c2ec2c96bf978", "parents": [ "824db172610020b49a26a556510432e564f1ff10", "e92eb875c90d1499151e5b077b7c6fb7fbfbb882" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 07:53:36 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 07:53:36 2012 -0700" }, "message": "Merge \"msm: mdm: add mdm driver support for the sglte modem\" into msm-3.0" }, { "commit": "e92eb875c90d1499151e5b077b7c6fb7fbfbb882", "tree": "3d07e29f32afaed20bc25b98efe4063290386e3c", "parents": [ "e52a90748887c68fa51c2a9f7eacd9baa305b45b" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Sun May 06 09:30:24 2012 -0700" }, "committer": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Tue May 29 17:10:47 2012 -0700" }, "message": "msm: mdm: add mdm driver support for the sglte modem\n\nThe sglte QSC modem has its own firmware storage but powering\nit on and reseting it is controlled by the msm. The same mdm\ndriver is used to support modems with their own flash and those\nthat are flashless.\n\nChange-Id: I2f9a0e79a78cbe8eda1d887ce731386cbdf444e0\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "ceaa8bc060d790cb97fa3258d23aa25010eaf098", "tree": "a9ab0a7f970869f44b75ecb6a82b6246754df359", "parents": [ "72bea4a9ebd32ac8b19e317b855df40f9f5a3089" ], "author": { "name": "Angshuman Sarkar", "email": "angshuman@codeaurora.org", "time": "Mon May 28 10:21:38 2012 +0530" }, "committer": { "name": "Chiranjeevi Velempati", "email": "cvelempa@codeaurora.org", "time": "Tue May 29 15:48:44 2012 +0530" }, "message": "n_smux: Fix compilation when CONFIG_N_SMUX is undefined\n\nFix compilation issues when CONFIG_N_SMUX is undefined and\nempty stub functions are getting defined.\n\nChange-Id: I6a9982dac7d9558b8da533f1fc28dddac6c1f8fc\nSigned-off-by: Angshuman Sarkar \u003cangshuman@codeaurora.org\u003e\n" }, { "commit": "0f411ec34788eae7d4df8a99deafb8e8d9076b8b", "tree": "3b8372e3729ab88653658045ca218c1672a564c4", "parents": [ "881704b6b7dd2990e4bfab7ff5e680ae875d3307", "d2c325e05cce18145b4639eb22b205efedfb34c5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 28 23:57:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 28 23:57:34 2012 -0700" }, "message": "Merge \"media: dvb: dvb-core: Extend get-capabilities API\" into msm-3.0" }, { "commit": "2e1d752be81c1eee283738ffa21afb179ae1cc1d", "tree": "8bb63cf1404aadbffc3905454e6a1fbd433635c2", "parents": [ "a3fe8df5d61bf52c971da8731ba536773c26c86d" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Fri May 25 15:08:40 2012 +0530" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Tue May 29 11:18:05 2012 +0530" }, "message": "ASoC: wcd9304: Fix wrong sample rate issue in RX2/RX3 channels\n\nThe default value of RX2/3_B5_CTL is wrong and resulting in wrong\nsample rate playback for headphone.\n\nChange-Id: Idf7d9bce1ee344677c48353fb3fe6a8f8bcc42ab\nCRs-Fixed: 361414\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "5b1e6f1afb70ace03b32b48d4d70f34302decdc2", "tree": "2325d95d96bfa67f0b49e80aada80ceb4366239d", "parents": [ "bf54a4dcfa3c1bb8491581c06a564e3b4824a81b" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon May 28 08:13:55 2012 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon May 28 08:13:55 2012 -0700" }, "message": "msm: camera: Remove subsystem_map header\n\nThe old subsystem_map APIs are being deprecated. The\nmsm_subsystem_map.h header file used to have definitions for\niommu domains. Remove this header file and include iommu_domains.h\nto get the necessary iommu definitions.\n\nChange-Id: I417a357789a8fea16bbadd98663a8ebe873ff4e7\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "f886c80ee2f4c29aeaab2d76c9303c00263bb428", "tree": "541b1df4dd73345cc623df6190c6669eb4c871c9", "parents": [ "8e84e09eafc7b31782e4cab7af9213fa3ea8eeed" ], "author": { "name": "Jaehoon Chung", "email": "jh80.chung@samsung.com", "time": "Mon May 28 10:33:35 2012 +0300" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 28 06:21:23 2012 -0600" }, "message": "mmc: support BKOPS feature for eMMC v4.5\n\nEnable eMMC background operations (BKOPS) feature.\n\nIf URGENT_BKOPS is set after a response, note that BKOPS\nare required. After all I/O requests are finished, run\nBKOPS if required. Should read/write operations be requested\nduring BKOPS, first issue HPI to interrupt the ongoing BKOPS\nand then service the request.\nIf BKOPS-STATUS is upper than LEVEL2, need to check until clear\nthe BKOPS-STATUS vaule.\n\nIf you want to enable this feature, set MMC_CAP2_BKOPS.\nAnd if you want to set the BKOPS_EN bit in ext_csd register,\nuse the MMC_CAP2_INIT_BKOPS.\n\nFuture considerations\n * Check BKOPS_LEVEL\u003d1 and start BKOPS in a preventive manner.\n * Interrupt ongoing BKOPS before powering off the card.\n * How get BKOPS_STATUS value.(periodically send ext_csd command?)\n\nChange-Id: Ia679c661a282072a7e54d10fc59d8ec1cbecae96\nSigned-off-by: Jaehoon Chung \u003cjh80.chung@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Konstantin Dorfman \u003ckdorfman@codeaurora.org\u003e\n" }, { "commit": "d2c325e05cce18145b4639eb22b205efedfb34c5", "tree": "1b99980be1ebcd4561300a61c4befb236937def8", "parents": [ "f5f3358e0bb8c6b024469c298c46c03cceb53a68" ], "author": { "name": "Hamad Kadmany", "email": "hkadmany@codeaurora.org", "time": "Mon May 28 13:52:49 2012 +0300" }, "committer": { "name": "Hamad Kadmany", "email": "hkadmany@codeaurora.org", "time": "Mon May 28 13:52:49 2012 +0300" }, "message": "media: dvb: dvb-core: Extend get-capabilities API\n\nProvide richer information to applications about\nactual demux capabilities\n\nChange-Id: I5b849ea72366f5332f716735818b9f090c46de43\nSigned-off-by: Hamad Kadmany \u003chkadmany@codeaurora.org\u003e\n" }, { "commit": "463bb9574d9f99e4200ff7a6abc386aa239755b1", "tree": "c1d667d4aedf996cabd18effb5aabc90937529b8", "parents": [ "2cc13f08cde4f2bc54f671ef0d4f07a86112bbf2" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu May 24 23:46:29 2012 +0300" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Mon May 28 09:14:29 2012 +0300" }, "message": "mmc: card: Adding support for sanitize in eMMC 4.5\n\nThis feature delete the unmap memory region of the eMMC card,\nby writing to a specific register in the EXT_CSD\nunmap region is the memory region that were previously deleted\n(by erase, trim or discard operation)\n\nChange-Id: I7f1df8e87fb782979fd90e064eca00704caca54b\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "5768bc967ca0fd8ec65ca4ba1d045a4f19697246", "tree": "eb33aeb42c8afa33e33ef4997955ad13251303a3", "parents": [ "470f796d732b58a15e7c70a6fff2942527d25b2c", "73937f5face75e05ec2a72966d04f4e20aa18379" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun May 27 16:13:31 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun May 27 16:13:31 2012 -0700" }, "message": "Merge \"block: ioctl support for sanitize in eMMC 4.5\" into msm-3.0" }, { "commit": "470f796d732b58a15e7c70a6fff2942527d25b2c", "tree": "b65492b4787a4e362e82cf4a0975774dc9135005", "parents": [ "31762b60d07140cd6684ba39caf795421fbbf12f", "9fff88720f8c3e06c99f25f6d34c319e08ec4d9a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun May 27 11:04:55 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun May 27 11:04:55 2012 -0700" }, "message": "Merge changes I2f51f692,Ibecf6cea into msm-3.0\n\n* changes:\n n_smux: smux_ctl: Userspace character device interface for SMUX\n tty: n_smux: Add SMUX TTY Line Discipline Driver\n" }, { "commit": "397642a15ed3e960409bd9e158135815457565dd", "tree": "ccd18142095df6bd0de640feb2c60584fc40f910", "parents": [ "5b524160f5cb1e6f68cd906328480c833f75b2a6", "aeb793ea48f0958b0aafac76c3fe774862f4dc69" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun May 27 05:58:31 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun May 27 05:58:31 2012 -0700" }, "message": "Merge \"msm: mpq8064: Add Video processing driver block for VCAP\" into msm-3.0" }, { "commit": "75fa40ac9b6fee49eaa290cd48e52cd296708354", "tree": "6550d333b2b2d2453ba00d4587465d494a35289d", "parents": [ "e98049f36fd289bf3872213048d7fdb40aa65ae3", "a112bbcdfe1916e814ea9fda27272f9b4bcd53ce" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun May 27 03:53:29 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun May 27 03:53:29 2012 -0700" }, "message": "Merge \"wcnss : Add more arguments to Thermal Mitigation APIs\" into msm-3.0" }, { "commit": "3babbb7922dcd084c4d64a26763817115e4a1a35", "tree": "cde571d945de478ccbf7f2e41eff3043f1353576", "parents": [ "e00004db6a6c0f467bbfc6c0ccfed9429b53c106", "9b1d9381d5def26ff62ea4f6c8405e31129b9a29" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun May 27 03:53:23 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun May 27 03:53:23 2012 -0700" }, "message": "Merge \"ALSA: Add jack type SND_JACK_UNSUPPORTED\" into msm-3.0" }, { "commit": "5db4ae04964c82384416670e2bf8577e2672a741", "tree": "4eb6d438b047eee510e631ee10ab605aa141cedb", "parents": [ "7f36b9893a9f9c54757ce4715a94751c739b19f7", "516994eee39282b8648b509e449ff83b49833209" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun May 27 03:53:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun May 27 03:53:14 2012 -0700" }, "message": "Merge \"mmc: core: Add packed command feature of eMMC4.5\" into msm-3.0" }, { "commit": "8ed30f20796acdadeddadb024b3c1127d986a301", "tree": "c5cec59a3b7d86d83f63ca6f48d7e32034a2622b", "parents": [ "aaf74ca34581feb8be797a6d8793824e73fecf67" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Thu May 10 19:16:51 2012 -0600" }, "committer": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Fri May 25 16:09:10 2012 -0600" }, "message": "tty: n_smux: Add SMUX TTY Line Discipline Driver\n\nAdd new Serial Multiplexer (SMUX) driver.\n\nThis driver multiplexes multiple logical channels over a single\nphysical HSUART channel using the TTY Line Discipline framework.\nThis driver will be used in Fusion 4 for control plane, data plane\nand DIAG traffic between Application processor and QSC modem.\n\nChange-Id: Ibecf6cea872f5baf11fb93ded6124243a37a2085\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\nSigned-off-by: Angshuman Sarkar \u003cangshuman@codeaurora.org\u003e\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "dd75dee500da982acb40f6b6fdc7638d1ee277dc", "tree": "78768230df446bb4c1ff4cbb27bfa6480928ef14", "parents": [ "646682679ef968a46cb93a7cd4924071721d626f", "6fa647ae102e9d45645bf53bff32993fd217835b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri May 25 12:08:19 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri May 25 12:08:19 2012 -0700" }, "message": "Merge \"usb: gadget: Add support for USB going into LPM on bus suspend\" into msm-3.0" }, { "commit": "83c81f62fa5a0ae50f30300474a46315f322d37b", "tree": "5265a8dc4e96ef43e9e230afee8904a975e1854f", "parents": [ "c3f3b0321016480b66def830deff50cc21a67910" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri May 18 16:09:05 2012 -0700" }, "committer": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Thu May 24 18:17:15 2012 -0700" }, "message": "ASoC: MSM: Add Support for WCD9304 codec version 1.1\n\nRegister and initialize the approriate device for WCD9304 codec\nversion 1.0 and version 1.1. Query version information from codec\nto be used from other drivers.\n\nChange-Id: I64c2dfe2dfc786c6b799f4698c1a36f52115880a\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "aeb793ea48f0958b0aafac76c3fe774862f4dc69", "tree": "ad2d6ce3e6c70e1314eece0df94fa962cafc53b4", "parents": [ "c3f3b0321016480b66def830deff50cc21a67910" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Fri May 11 11:41:16 2012 -0400" }, "committer": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Thu May 24 19:41:49 2012 -0400" }, "message": "msm: mpq8064: Add Video processing driver block for VCAP\n\nAdding VP portion to MSM VCAP. VP is used for deinterlacing video.\n\nChange-Id: I888e841cf4d65cf1e5b0316db16923c914469235\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "9e71913d802464172c7586e872a9288279ec3b1a", "tree": "d318c6a9a02cc90f9eff638093526e75abccdf99", "parents": [ "48b37fac01f0747ded04511cbdd1799d7a484991", "d4cc3b0d86e05c37fe94d0f769dfb9317a9e89c9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 24 16:22:10 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 24 16:22:10 2012 -0700" }, "message": "Merge \"media: dvb: dvb-core: Add video indexing support for MPQ usecase\" into msm-3.0" }, { "commit": "9b1d9381d5def26ff62ea4f6c8405e31129b9a29", "tree": "aaf8d49c43f4a90cd1fcd6aef46cdc25a0b72d0c", "parents": [ "03bb493026b10388b5aea58f723d5c15d7ae77eb" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Wed May 09 12:36:49 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Thu May 24 14:23:57 2012 -0700" }, "message": "ALSA: Add jack type SND_JACK_UNSUPPORTED\n\nAdd a new snd jack type SND_JACK_UNSUPPORTED to notify when unsupported\nplug type is detected.\n\nChange-Id: I1e9907f063a65e7797f967c5d6a77a62b11f95a2\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "48b37fac01f0747ded04511cbdd1799d7a484991", "tree": "a418d98864879d1187265ca255824d28392f4787", "parents": [ "ed831e7a55f646ac05a8e3a194cbf13086b6cdc5", "7d5bfbc69248f59e4889372e536d310ccfeb49a3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 24 14:08:13 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 24 14:08:13 2012 -0700" }, "message": "Merge \"msm: mpq8064: Client passes timing information to VCAP\" into msm-3.0" }, { "commit": "ed831e7a55f646ac05a8e3a194cbf13086b6cdc5", "tree": "73b4a57db66b5a7180d09e11b14ef8ecc9512fc9", "parents": [ "c414c799a249a7751d6a5b32fd2eeee0a1136650", "547a998203efa79c0868f0afb23b2fba1daa8578" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 24 14:08:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 24 14:08:12 2012 -0700" }, "message": "Merge \"ASoC: msm: Add the support for 16kHz AUX PCM\" into msm-3.0" }, { "commit": "c414c799a249a7751d6a5b32fd2eeee0a1136650", "tree": "50b7e866098de75cdcf6e6eeb40fbce991be5665", "parents": [ "efcf930fd60ccfcae19723444f9ae5e0dcf9380e", "b44f9e264c6c64eea22715bf3105fc01cb8ae687" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 24 14:08:11 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 24 14:08:11 2012 -0700" }, "message": "Merge \"Bluetooth: Hold wakelock until BT idle timer kicks in.\" into msm-3.0" }, { "commit": "73937f5face75e05ec2a72966d04f4e20aa18379", "tree": "f3c12b4daec9f72dbecc33001f33ee210c046fec", "parents": [ "3063b5a519b392dd13afd2ffe820eba312db2759" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu May 24 23:33:05 2012 +0300" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu May 24 23:33:05 2012 +0300" }, "message": "block: ioctl support for sanitize in eMMC 4.5\n\nAdding a new ioctl to support sanitize operation in eMMC\ncards version 4.5.\nThe sanitize ioctl support helps performing this operation\nvia user application.\n\nChange-Id: I79aa4163e7753a75bed5a26a9a92de902b4b9c21\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "516994eee39282b8648b509e449ff83b49833209", "tree": "d43b5e7cb90491a7b2c3e6e9b4670b1aab2f522a", "parents": [ "3063b5a519b392dd13afd2ffe820eba312db2759" ], "author": { "name": "Seungwon Jeon", "email": "tgih.jun@samsung.com", "time": "Sat May 19 19:52:39 2012 +0300" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu May 24 22:39:12 2012 +0300" }, "message": "mmc: core: Add packed command feature of eMMC4.5\n\nThis patch adds packed command feature of eMMC4.5.\nThe maximum number for packing read(or write) is offered\nand exception event relevant to packed command which is\nused for error handling is enabled. If host wants to use\nthis feature, MMC_CAP2_PACKED_CMD should be set.\n\nChange-Id: I8013970fc9d54da7d92b0aca2bb0746189b9825b\nSigned-off-by: Seungwon Jeon \u003ctgih.jun@samsung.com\u003e\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "3063b5a519b392dd13afd2ffe820eba312db2759", "tree": "f81cf5046d8941fb456744bf9020875fb086d5ac", "parents": [ "c40d0957fba415438a9b4a3e4a7a13d33ffc74e5", "f3ac575a837558b76a987ab6454dbc841401cbbd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 24 09:03:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 24 09:03:37 2012 -0700" }, "message": "Merge \"mmc: host: remove mmcq performance numbers statistics\" into msm-3.0" }, { "commit": "6fa647ae102e9d45645bf53bff32993fd217835b", "tree": "81e4a1c0538fe19064ef252a7af255183bbdc6de", "parents": [ "e52a90748887c68fa51c2a9f7eacd9baa305b45b" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Thu May 24 14:12:08 2012 +0300" }, "committer": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Thu May 24 14:12:08 2012 +0300" }, "message": "usb: gadget: Add support for USB going into LPM on bus suspend\n\nThis change adds the ability of the msm_otg to go to LPM when\nUSB cable is connected and bus is suspended.\nThis ability is enabled by a board file parameter.\n\nThe msm_otg is notified about SUSPEND/RESUME events via the\nUDC layer. New event for RESUME was defined for that.\n\nChange-Id: Ic508f1898cc3b57ab76eccd379bea38ed363570b\nSigned-off-by: Amit Blay \u003cablay@codeaurora.org\u003e\n" }, { "commit": "b44f9e264c6c64eea22715bf3105fc01cb8ae687", "tree": "6544a77843f9b52598c0ec688dbe1c395f99e630", "parents": [ "fcef77c48a53b8b9cefa7346046c5b3816dffc79" ], "author": { "name": "Rahul Kashyap", "email": "rkashyap@codeaurora.org", "time": "Thu May 03 16:45:17 2012 +0530" }, "committer": { "name": "Rahul Kashyap", "email": "rkashyap@codeaurora.org", "time": "Thu May 24 11:38:05 2012 +0530" }, "message": "Bluetooth: Hold wakelock until BT idle timer kicks in.\n\nHolding a wakelock avoids suspend power collapse, which\nallow the BT idle timer to kick in, which eventually\ninitiates BT low power modes.\n\nCRs-Fixed: 361067\nChange-Id: I93e3950b6f854e70dbce092a5529120ec008c2b8\nSigned-off-by: Rahul Kashyap \u003crkashyap@codeaurora.org\u003e\n" }, { "commit": "a112bbcdfe1916e814ea9fda27272f9b4bcd53ce", "tree": "b5eff62cea644e817b2529cb770b0001bfcd3036", "parents": [ "e19da49fc76edfbb1c88416fc45be4ff0164929b" ], "author": { "name": "Sameer Thalappil", "email": "sameert@codeaurora.org", "time": "Wed May 23 12:20:32 2012 -0700" }, "committer": { "name": "Sameer Thalappil", "email": "sameert@codeaurora.org", "time": "Wed May 23 14:01:42 2012 -0700" }, "message": "wcnss : Add more arguments to Thermal Mitigation APIs\n\nThermal mitigation event handle functions needs device\ncontext to handle the event properly.\n\nCRs-fixed: 364094\nChange-Id: I2afa87eba755f082018510e9bfa6962392f591fd\nAcked-by: Leo Chang \u003cschang@qca.qualcomm.com\u003e\nSigned-off-by: Sameer Thalappil \u003csameert@codeaurora.org\u003e\n" }, { "commit": "547a998203efa79c0868f0afb23b2fba1daa8578", "tree": "cf2b6e1944be9ba19cc4b38e4b3c20bfbbbd5ab4", "parents": [ "fcef77c48a53b8b9cefa7346046c5b3816dffc79" ], "author": { "name": "Kuirong Wang", "email": "kuirongw@codeaurora.org", "time": "Fri May 04 18:29:11 2012 -0700" }, "committer": { "name": "Kuirong Wang", "email": "kuirongw@codeaurora.org", "time": "Wed May 23 13:41:11 2012 -0700" }, "message": "ASoC: msm: Add the support for 16kHz AUX PCM\n\nThere are use cases that 16kHz sample rate AUX PCM needed\nbesides 8kHz. Add the support so that the corresponding\nsample rate dependent platform data is used to configure\nthe AUX PCM port.\n\nChange-Id: I58715238cacdeea5e59b5e1693a34f005f289e0f\nSigned-off-by: Kuirong Wang \u003ckuirongw@codeaurora.org\u003e\n" }, { "commit": "d680765f0f8bc55fd6443d13b9216a999aa4d190", "tree": "9701eebeec85ca0c08293a5e588f3c53f0ac61c6", "parents": [ "c88f68b60eea066af52fecb958444b165a6ed0c5", "c4ee3b026c766ab96dabe6ce6420c934fa3ec311" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 23 08:10:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 23 08:10:12 2012 -0700" }, "message": "Merge \"ASoC: msm: Support WMA Pro playback\" into msm-3.0" }, { "commit": "7d5bfbc69248f59e4889372e536d310ccfeb49a3", "tree": "1eb54439c67fb38e03e22614678672964d70fdaa", "parents": [ "8fdc003824c7e052a4da6fac71c1074b5edb18b9" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Tue May 08 13:33:48 2012 -0400" }, "committer": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed May 23 10:55:30 2012 -0400" }, "message": "msm: mpq8064: Client passes timing information to VCAP\n\nThis will allow the VCAP driver to be more dynamic and will allow\nfor the timing table to be removed from the Video Capture\n\nChange-Id: Ib631104cc2c45adf429b6a6ca90415c191e24566\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "d4cc3b0d86e05c37fe94d0f769dfb9317a9e89c9", "tree": "da9e0eaad038f370e97c88ad60e0c66b7aa2b091", "parents": [ "246c6876dd5201bee7ff91a1b54bc4fd29434f51" ], "author": { "name": "Liron Kuch", "email": "lkuch@codeaurora.org", "time": "Thu May 17 16:31:58 2012 +0300" }, "committer": { "name": "Liron Kuch", "email": "lkuch@codeaurora.org", "time": "Wed May 23 16:54:47 2012 +0300" }, "message": "media: dvb: dvb-core: Add video indexing support for MPQ usecase\n\nMPQ uses dvb/demux and dvb/video for broadcast feature. Video indexing\n(or framing) is required for PVR use case or when the video decoder\ndoes not handle framing. Linux dvb-core was extended to support\nvideo indexing.\n\nNew features:\n- Support passing video indexing parameters as part of PES filter\n parameters.\n- Support storing video indexing parameters per TS feed.\n\nChange-Id: I33289743cb93e8bc46ba8d6da88805326c89c523\nSigned-off-by: Liron Kuch \u003clkuch@codeaurora.org\u003e\n" }, { "commit": "f3ac575a837558b76a987ab6454dbc841401cbbd", "tree": "dff8d08867b5fd8b41a9a0649b37f274e9fa8b1c", "parents": [ "96e6708fb1a93fc57cab12cb33d4893fb243c47c" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Tue May 22 22:59:54 2012 +0530" }, "committer": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Wed May 23 15:16:27 2012 +0530" }, "message": "mmc: host: remove mmcq performance numbers statistics\n\nmmcq performance numbers are not captured since asynchronous\nMMC request support got added in MMC block driver. So printing\nout these numbers (which are all zeros) just adds confusion.\nThis patch removes the printing of mmcq performance numbers\nstatistics.\n\nCRs-Fixed: 364206\nChange-Id: I7213b11c8e9e055894c9902af7e975de3be1c519\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "e495a31d4c28d8bc6555504a005bd981f04e2e12", "tree": "e8d847ada25124875fa5237af2b8c2596841ffab", "parents": [ "a66b5c7379d32bc64e5486336fe83b5e124c6f04", "a2dd735dabb3f7782e6fb6c2f9f97de722bf6c97" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 22 22:43:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 22 22:43:32 2012 -0700" }, "message": "Merge \"diag: Add message support for max packet size cmd/rsp messages\" into msm-3.0" }, { "commit": "a2dd735dabb3f7782e6fb6c2f9f97de722bf6c97", "tree": "697377375fb4c9a56f3c91279fae6a1d4a89c245", "parents": [ "03bb493026b10388b5aea58f723d5c15d7ae77eb" ], "author": { "name": "Dixon Peterson", "email": "dixonp@codeaurora.org", "time": "Mon May 21 17:37:10 2012 -0700" }, "committer": { "name": "Dixon Peterson", "email": "dixonp@codeaurora.org", "time": "Tue May 22 14:37:24 2012 -0700" }, "message": "diag: Add message support for max packet size cmd/rsp messages\n\nTools that run on the PC need to know the maximum packet size\nfor cmd/rsp messages so they can appropriately allocate\nmemory and if the payload is large enough, break the message\nup into multiple calls. Add support for returning the\nmaximum packet size for cmd/rsp messages.\n\nChange-Id: Id53eaef6d6c67f7a22ed8d2ae4b82e2aa6794e65\nSigned-off-by: Dixon Peterson \u003cdixonp@codeaurora.org\u003e\n" }, { "commit": "8fdc003824c7e052a4da6fac71c1074b5edb18b9", "tree": "55fac36e2991657f8c18e29fc616a9bc02e29340", "parents": [ "c12f2ea5f1273ee4593a4dd0a6de9687056ab110", "f2acb8593e9b17c69a4c33dd280ecd7edee3dbea" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 22 12:07:35 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 22 12:07:35 2012 -0700" }, "message": "Merge \"msm: vidc: Adds support for port reconfiguration.\" into msm-3.0" }, { "commit": "ace9fa926fc6cf850629dab6e82cbd1e39950817", "tree": "883d069eaa622af6518668aef286f4fe9b8d2317", "parents": [ "7a1676edb438a6b5c829004c4746923c1e6bd7cb" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Fri May 11 13:05:40 2012 +0530" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Tue May 22 18:01:25 2012 +0530" }, "message": "misc: isa1200: Add support for clock enable\n\nISA1200 uses clock to generate pwm for vibration. Add\na callback api to control the clock.\n\nCRs-fixed: 357656\nChange-Id: Iac1d0cdb3ac950b7bbc2afbe3a92b0e0292e3811\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "0f01dd50def6cf67ac1408312e485797baa7ffa6", "tree": "606bc265215f75b194117cf8d52cbbca5007853e", "parents": [ "3c22240b847a49b24f0fad06b73e9780f4794562", "5b79a3252710683b406c03ab21a808e852cb2962" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 22 02:54:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 22 02:54:15 2012 -0700" }, "message": "Merge \"msm: vidc: Adds support for conveying events.\" into msm-3.0" }, { "commit": "f2acb8593e9b17c69a4c33dd280ecd7edee3dbea", "tree": "8ab88d20b860acbd668aceff04acf68e9444da9d", "parents": [ "5b79a3252710683b406c03ab21a808e852cb2962" ], "author": { "name": "Praneeth Paladugu", "email": "ppaladug@codeaurora.org", "time": "Mon May 07 17:44:53 2012 -0700" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Mon May 21 18:08:38 2012 -0700" }, "message": "msm: vidc: Adds support for port reconfiguration.\n\nAdds support for port reconfiguration. This enables decoder to\nreconfigure to new resolution or settings other than initially\nconfigured to continue video playback.\n\nChange-Id: Id11e973e4cf1a5c7e4ec5544215fe57cb19466be\nSigned-off-by: Praneeth Paladugu \u003cppaladug@codeaurora.org\u003e\n" }, { "commit": "5b79a3252710683b406c03ab21a808e852cb2962", "tree": "2931306c360e3938b8687740c11db0a60b85d06e", "parents": [ "b8a846f11928fe6308dddfae0cb7dc8e9e2d7ae2" ], "author": { "name": "Praneeth Paladugu", "email": "ppaladug@codeaurora.org", "time": "Wed Apr 18 15:16:29 2012 -0700" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Mon May 21 17:50:45 2012 -0700" }, "message": "msm: vidc: Adds support for conveying events.\n\nAdds support for conveying events to userspace from kernel\ndriver. This is needed to let userspace/client know of\nany error or other event of importance.\n\nChange-Id: Ife450b9f5dfe23f07b6f346c8e27c214fc85e083\nSigned-off-by: Praneeth Paladugu \u003cppaladug@codeaurora.org\u003e\n" }, { "commit": "1aa4e5a974b3087d29510802810170c071df8546", "tree": "f2d984de7ce60ce31d933e51fcc24ddbd4bbf985", "parents": [ "03bb493026b10388b5aea58f723d5c15d7ae77eb" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon May 14 18:55:50 2012 -0700" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon May 21 14:10:46 2012 -0700" }, "message": "memblock: Add memblock_overlaps_memory()\n\nAdd a new function, memblock_overlaps_memory(), to check if a\nregion overlaps with a memory bank. This will be used by\nperipheral loader code to detect when kernel memory would be\noverwritten.\n\nChange-Id: I851f8f416a0f36e85c0e19536b5209f7d4bd431c\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "c4ee3b026c766ab96dabe6ce6420c934fa3ec311", "tree": "98a6e94bef4841cf6b2092fa3617d1d92b924480", "parents": [ "29b1fd636a98a628d96e09427546cdc6035b7b17" ], "author": { "name": "Aviral Gupta", "email": "aviralg@codeaurora.org", "time": "Wed May 09 10:53:45 2012 +0530" }, "committer": { "name": "Aviral Gupta", "email": "aviralg@codeaurora.org", "time": "Mon May 21 11:08:56 2012 +0530" }, "message": "ASoC: msm: Support WMA Pro playback\n\nAdd support for WMA Pro codec in tunnel mode playback.\n\nChange-Id: Iad8d67c77fcd8b6af7db9102f2faf4dde7423f24\nSigned-off-by: Aviral Gupta \u003caviralg@codeaurora.org\u003e\n" }, { "commit": "27535d83c7e0287267ff0bcddb35527a4a58cb14", "tree": "cd11c2c7789688bb5a78b1931e857ca2f368c713", "parents": [ "2ba7f1907db651da7bfea1c14377bb5dfe75daa8", "13f6bebd7a84835348a63b4cf42afddb11a96040" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun May 20 19:37:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun May 20 19:37:32 2012 -0700" }, "message": "Merge \"[media] v4l2: add VIDIOC_(TRY_)DECODER_CMD\" into msm-3.0" }, { "commit": "be62bd534f4c18ab9f58735b4453bb65f217cf69", "tree": "f051fee86efbb1f6506669da505a0149c7d27567", "parents": [ "a78066f79ce1ee97923a77f7efe8862cdb7e1006", "4584b5fe6f4ed1f4b0e5131c83a767a97497b9de" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 19 14:36:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 19 14:36:32 2012 -0700" }, "message": "Merge \"msm: camera: Add support for gesture driver\" into msm-3.0" }, { "commit": "a78066f79ce1ee97923a77f7efe8862cdb7e1006", "tree": "b2ae33f266ffd3cf1f69ae9799c18c2987facc72", "parents": [ "afaed13ec689ee89c55baf09d3717bfb39a4b238", "4947d8cd8cc0889058801820d56edd9bbcb23d70" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 19 13:11:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 19 13:11:20 2012 -0700" }, "message": "Merge \"msm: vidc: Use pre-computed frame delta values in WFD use case\" into msm-3.0" }, { "commit": "4584b5fe6f4ed1f4b0e5131c83a767a97497b9de", "tree": "0558d397d014d20d2a8356161a0beb06bc59783d", "parents": [ "54d49d7bc7432b952fa791fac299c4c0bbb73e78" ], "author": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Fri Apr 13 12:48:25 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 19 12:34:34 2012 -0600" }, "message": "msm: camera: Add support for gesture driver\n\nAdded gesture driver code. Gesture node is a subdevice to\nserver node.\n\nChange-Id: I488da3dbdb502a2f78b0cd5269dd113c472ee377\nSigned-off-by: Sunid Wilson \u003csunidw@codeaurora.org\u003e\n" }, { "commit": "13f6bebd7a84835348a63b4cf42afddb11a96040", "tree": "fc023268e6ca82f546ae3eb6370be9240eef1988", "parents": [ "770fb83ab61722e46a3c855bc0eeed906e35774f" ], "author": { "name": "Hans Verkuil", "email": "hans.verkuil@cisco.com", "time": "Thu Nov 24 09:53:43 2011 -0300" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Fri May 18 14:43:33 2012 -0700" }, "message": "[media] v4l2: add VIDIOC_(TRY_)DECODER_CMD\n\nAs discussed during the 2011 V4L-DVB workshop, the API in dvb/video.h should\nbe replaced by a proper V4L2 API. This patch turns the VIDEO_(TRY_)DECODER_CMD\nioctls into proper V4L2 ioctls.\n\nChange-Id: I8f293613c833b40ffa62e814c0d88a55ea0c7f13\nSigned-off-by: Hans Verkuil \u003chans.verkuil@cisco.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "770fb83ab61722e46a3c855bc0eeed906e35774f", "tree": "75d1dd621b6ec00213ac28aa892711f86d9c2b97", "parents": [ "146f947c3eb560b8ecec66305a731e338ee5920f", "9c8bab95ac974600c7809db2fc7b3c35004fd5dd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri May 18 10:34:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri May 18 10:34:15 2012 -0700" }, "message": "Merge changes I2b5a64c2,I6396106a,Ie9d0eed3,Ie95674dc,Ie1679644 into msm-3.0\n\n* changes:\n media: msm_vidc: fix compilation issue.\n media: v4l2: add video controls in v4l2 framework.\n media: msm_vidc: add v4l2 controls for video encoder\n media: msm_vidc: add set property support in video driver\n media: msm_vidc: Add hardware interface for video core.\n" }, { "commit": "6d2877ca5aea81272ced620d176448d9f63ab1b6", "tree": "47f1091f04ff9ed2964bd97e0bc55980bfac643e", "parents": [ "d2ab0e33cf250647cccabff1073f736f05c7ee83" ], "author": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Tue Apr 03 18:50:18 2012 -0700" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Thu May 17 18:14:53 2012 -0700" }, "message": "media: v4l2: add video controls in v4l2 framework.\n\nAdds control definitions in v4l2 framework needed for\nconfiguring video codec properties. Userspace clients\nand in-kernel clients can make calls into video driver\nto set/change codec properties like codec, profile, level,\nresolution, bitrate, ratecontrol, framerate.\n\nChange-Id: I6396106af69b2686a78b83d5833cd60a1c6d4cef\nSigned-off-by: Ashray Kulkarni \u003cashrayk@codeaurora.org\u003e\n" }, { "commit": "65b52ec181678b3cad54b9b5620f4c5cf160793b", "tree": "9f5f697fb2a4d24d65661d6e90b031317d16080a", "parents": [ "0866172607b9f7eb0b59c41b45a6c1b054597b83", "ea3e7b66a91da4640e65e585edc629aae9079a3d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 17 15:39:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 17 15:39:09 2012 -0700" }, "message": "Merge \"msm: qdsp6v2: Move away from the subsystem map apis\" into msm-3.0" }, { "commit": "0a48e57ab217942c54e5af9764309f9b812b6d31", "tree": "ed8892b4fbb57cff2b7926d9ef0ec51ab3310544", "parents": [ "2b0d619de09b4aa6a26e7b4f7a38dbe9914bc983", "5ca279bff7880df5284680c5f09984b86f511ad2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 17 15:38:59 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 17 15:38:59 2012 -0700" }, "message": "Merge \"usb: msm_otg: system resume only resumes hardware when needed\" into msm-3.0" }, { "commit": "2b0d619de09b4aa6a26e7b4f7a38dbe9914bc983", "tree": "41ffd4abe5acf89265223b58bcbb4fef1cfce635", "parents": [ "f6744857c32b0b97b449e6e43df7afc0bdda4fc4", "71f7dec4809baa38440ca7cc33bd18b67f817c49" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 17 15:38:56 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 17 15:38:56 2012 -0700" }, "message": "Merge \"msm: qdsp5v2: Update MVS driver for evrc codec\" into msm-3.0" }, { "commit": "86f1ed975f76954ca25a1e711a848fd74498ded3", "tree": "8ff9e9045c260af4662d9d89ad2f35e3ec7df93c", "parents": [ "829dc645a69ac718adba9372bab2231b250e5793", "1c9030171b3c8175f3631f1de80b4d2d9c2febef" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 17 10:26:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 17 10:26:09 2012 -0700" }, "message": "Merge changes I901701be,I31a03044 into msm-3.0\n\n* changes:\n msm: board-8064: Add user space RC input loopback driver support\n media: rc: Add remote control event report from user space input\n" }, { "commit": "e74a703f99fd883a20305c4d300363ece8fd07f1", "tree": "2b66329385e22d578611aa82fc63403138afa2d7", "parents": [ "1c0e9081a5983f6d02100e178623564857a3468b", "3766b1e6b4dea7dea0abed1e9090390640a12909" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 17 08:43:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 17 08:43:58 2012 -0700" }, "message": "Merge \"media: msm_vidc: Add video driver for video core.\" into msm-3.0" }, { "commit": "d4cb56c3e272727a8118e7760edf138e3d310768", "tree": "100eff9b08a94cd70e0d67353ef69810eeb14662", "parents": [ "b910bf98c6dfb453f81b4ab000d03cc29c3c585d" ], "author": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Thu Mar 22 19:04:13 2012 +0530" }, "committer": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Thu May 17 11:20:06 2012 +0530" }, "message": "media: rc: Add remote control event report from user space input\n\nSome of user space applications need to send the remote key events\nto kernel input subsystem, so for these type of applications this driver\nenables them to send key events to kernel.\nUser has to send the key event type (pressed,repeated,released) and scan\ncode value.\n\nChange-Id: I31a03044702020bd7bfd6cfdc310e65f85d282ef\nSigned-off-by: Ravi Kumar V \u003ckumarrav@codeaurora.org\u003e\n" }, { "commit": "5ca279bff7880df5284680c5f09984b86f511ad2", "tree": "9c9f3ece791675913fe5b83fc8507325246ff60a", "parents": [ "b910bf98c6dfb453f81b4ab000d03cc29c3c585d" ], "author": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Mon May 14 18:42:54 2012 -0700" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed May 16 18:51:11 2012 -0700" }, "message": "usb: msm_otg: system resume only resumes hardware when needed\n\nPart of commit d44455a0b838b1d691e63913f0b159552ac01803 introduced\na regression affecting resume behavior in that the controller\u0027s system\nresume callback is being followed by an immediate runtime suspend; if\nthe system resume was caused by an OTG event, there would be a pending\nruntime resume in the state machine function, which might fail due to\nthis race, causing the PHY to be unnecessarily reset.\n\nThis patch limits the actual hardware resumes to happen only when needed.\n\nIf a possible wakeup event such as VBUS or ID interrupt occurs while\nin system suspend, don\u0027t allow runtime resume to execute in the wakeup\nhandler but rather defer the resuming to the system resume callback.\nAlso by incrementing the PM runtime usage counter within the system\nresume, it may help prevent the premature runtime suspend from happening\nimmediately afterward. Otherwise, if there is no such OTG event, and\nthe controller is not a suspended host, do nothing.\n\nIf the bus is instead runtime suspended (and not system suspended) when\na wakeup event occurs, then normal runtime resume will bring the\nhardware out of low power mode.\n\nCRs-fixed: 358761\nChange-Id: I4249690485949ecb3072e258859608ecea52ec9b\nSigned-off-by: Jack Pham \u003cjackp@codeaurora.org\u003e\n" }, { "commit": "3766b1e6b4dea7dea0abed1e9090390640a12909", "tree": "56373d189c29e0470fe60dce166543d0a321cef8", "parents": [ "d8217960a0d6868016e0c8448dd7bc325450c910" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Wed Jan 11 18:58:41 2012 -0800" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Wed May 16 12:32:29 2012 -0700" }, "message": "media: msm_vidc: Add video driver for video core.\n\n- Adds video encoding and decoding functionality.\n- Implements v4l2 interface based driver for interacting\n with userspace modules to perform video encoding and\n decoding.\n- Implements kernel API for interacting with kernel\n modules like Wifi display(encoder) and V4L2 based\n DVB(decoder).\n\nChange-Id: Iadb83b60139e659ae7f66e5dc38c46fef52ca99d\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "ea3e7b66a91da4640e65e585edc629aae9079a3d", "tree": "20c50f9567ef9f7ba4ec9ea3edf914807797a1a0", "parents": [ "61399698562b6bbc3a99a117b515d3573acb383e" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Apr 30 15:59:21 2012 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed May 16 07:09:32 2012 -0700" }, "message": "msm: qdsp6v2: Move away from the subsystem map apis\n\nThe subsystem map APIs are no longer the prefered method for\nmapping into the kernel address space. Use ioremap directly for\nphysical memory to be accessed for debugging.\n\nChange-Id: Ib7c2277f284f4a2a274e318f4b6e873027c179a5\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "71f7dec4809baa38440ca7cc33bd18b67f817c49", "tree": "308a0737994bb549ab8915b22bc3328f33df18c3", "parents": [ "e377c9810a607309128dccff9ffbd11d3c3ea597" ], "author": { "name": "Vinay Vaka", "email": "vvaka@codeaurora.org", "time": "Thu Apr 12 21:48:08 2012 +0530" }, "committer": { "name": "Vinay Vaka", "email": "vvaka@codeaurora.org", "time": "Wed May 16 15:09:45 2012 +0530" }, "message": "msm: qdsp5v2: Update MVS driver for evrc codec\n\n-Update MVS driver to address evrc codec properly\n-MVS driver is updated to support evrc codec.MVS_MAX_VOC_PKT_SIZE size\n incresed to 640 to support PCM WB for 8660 targets.Unfortunately\n 7630 modem do not support PCM WB but the app changes effected all\n the targets where modem expecting the packet size as 320 but 7630\n application is sending packet size of 640\n increse in PKT size 7630,modem not receving the packet info since\n modem expecting PKT size 320 only.\n-To address this issue Added new structure q5v2_msm_audio_mvs_frame\n and variable Q5V2_MVS_MAX_VOC_PKT_SIZE.\n Updated the EVRC rate info properly.\n\nCRs-Fixed: 354100\nChange-Id: Iafefc71142f51d74168471bd87d1fac98a46b80a\nSigned-off-by: Vinay Vaka \u003cvvaka@codeaurora.org\u003e\n" }, { "commit": "fed14d9343eaf05e2412eedd09cbd9de9c272acd", "tree": "dd6b212ca2d7a404f3226dab5085454396285a0b", "parents": [ "a455d80e942568eafa3a02f16d04a6bb121d39fe" ], "author": { "name": "Nicolas Pitre", "email": "nicolas.pitre@linaro.org", "time": "Mon Apr 16 19:16:54 2012 -0400" }, "committer": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Wed May 16 08:18:01 2012 +0530" }, "message": "mmc: sdio: avoid spurious calls to interrupt handlers\n\nCommit 06e8935feb (\"optimized SDIO IRQ handling for single irq\")\nintroduced some spurious calls to SDIO function interrupt handlers,\nsuch as when the SDIO IRQ thread is started, or the safety check\nperformed upon a system resume. Let\u0027s add a flag to perform the\noptimization only when a real interrupt is signaled by the host\ndriver and we know there is no point confirming it.\n\nChange-Id: Ibfd6b35589b15fabea7b1c18dfa2197a78866b61\nReported-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\nSigned-off-by: Nicolas Pitre \u003cnico@linaro.org\u003e\nCc: stable \u003cstable@vger.kernel.org\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "dd8c962864c5c2a08f336edd16151a0c1dace6c6", "tree": "61add01610c41dc8eb91b77a699fd38250d57292", "parents": [ "7d45dd5c26d7fa3139da602cd715cb0223c1b9bb", "c49bee55cf610a74b635c3480e97b6b9aaf885e6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 15 10:35:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 15 10:35:20 2012 -0700" }, "message": "Merge \"Revert \"Revert \"mmc: sdio: optimized SDIO IRQ handling for single irq\"\"\" into msm-3.0" }, { "commit": "6c88bf126a1f49834a23ef7a603c402742a4fa53", "tree": "edaed7fb823b043841513e048fa7b897b92ef3b2", "parents": [ "69d527f0b54cbb66908e2adfcdba43b6fd9274c0", "74131aca5e61f1a1b4c8a9714773c18a0a962bd0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 15 05:02:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 15 05:02:48 2012 -0700" }, "message": "Merge \"ASoC: msm: Add support for external EC reference from APQ.\" into msm-3.0" }, { "commit": "4947d8cd8cc0889058801820d56edd9bbcb23d70", "tree": "96094506d50ec20729130fa27a6a5cc9cc72bbd2", "parents": [ "7e3bfd67b3c779c669ede2debfb6fcabc4884ec1" ], "author": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Tue Apr 03 12:41:06 2012 -0700" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Mon May 14 21:56:39 2012 -0700" }, "message": "msm: vidc: Use pre-computed frame delta values in WFD use case\n\nIn WFD use-case with frame skipping enabled, we wish to fool the core\ninto thinking that that the frames are coming at a consistent rate so\nthat we don\u0027t run into any issues with the core\u0027s rate control\nmechanism.\n\nIntroduce a client-settable property that dictates what the timestamp\ndelta between any two frames might be.\n\nChange-Id: Iea3f97879227b7932543d3449d311758dc4a2f59\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\n" }, { "commit": "a8e95ee1f7cc7df6a52ad6bc53c8cc0d50d4ccc8", "tree": "1c14b44c5c33edec4db6ac8aa32c38d6ec63bf3a", "parents": [ "3b5b241b3de6bf42ce3331ab5680aa7d2696970c", "6329bf0a03811f4644a4c8d50bf241f6db6f19b5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 14 14:51:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 14 14:51:48 2012 -0700" }, "message": "Merge \"ipsec: be careful of non existing mac headers\" into msm-3.0" }, { "commit": "cf99dcbaab0551a8dcce3b3ed03b851e76e274d9", "tree": "155e16f67d2acef34e220e9a1edf3eef349bdd85", "parents": [ "a6d571b8905e6e0b6df507c3c5d6df9f6e01c0e7", "ba4ea6eccabe48e04a43f5f0da17a33743b24e89" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 14 14:51:38 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 14 14:51:38 2012 -0700" }, "message": "Merge \"mfd: pm8xxx-misc: Add API to control HSED BIAS lines\" into msm-3.0" }, { "commit": "74131aca5e61f1a1b4c8a9714773c18a0a962bd0", "tree": "558310f877023fdffccde375ae729ac191712ad9", "parents": [ "c9d86c3ea26b0a6fa91559f7f985ccb9fed63a43" ], "author": { "name": "Neema Shetty", "email": "nshetty@codeaurora.org", "time": "Wed May 09 13:35:26 2012 -0700" }, "committer": { "name": "Neema Shetty", "email": "nshetty@codeaurora.org", "time": "Sun May 13 23:47:56 2012 -0700" }, "message": "ASoC: msm: Add support for external EC reference from APQ.\n\nAdd support for a back-end DAI that routes the mixed audio and\nvoice streams from the application processor to the external\nmodem for echo-cancellation.\n\nChange-Id: I6c938803dccdb6ed8e15e870cceb6b0de7019afb\nSigned-off-by: Neema Shetty \u003cnshetty@codeaurora.org\u003e\n" }, { "commit": "1a81cacffab1d829740dec7cb55c863a789d2cbc", "tree": "7161a040d30e0a48219aaf18bc52dc0493956de6", "parents": [ "cf501fbfcddb178d5ca72685db44be1fa717f38c", "734476bedc61c6faaed7038131ac63f72ef2aac4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun May 13 20:09:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun May 13 20:09:58 2012 -0700" }, "message": "Merge \"msm: camera: eeprom subdevice support for camera sensor\" into msm-3.0" }, { "commit": "ba4ea6eccabe48e04a43f5f0da17a33743b24e89", "tree": "61f06bcd094dbf1c288ad8afa184c97d4b592b4a", "parents": [ "78468e8392a8d5766516a45b6f1c74cba0046283" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed May 09 15:59:28 2012 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon May 14 08:09:50 2012 +0530" }, "message": "mfd: pm8xxx-misc: Add API to control HSED BIAS lines\n\nQualcomm PMIC\u0027s support 3 HSED BIAS lines which as used\nas Micrphone bias. The API adds ability to control (enable/disable)\nthese bias lines.\n\nCRs-Fixed: 359206\nChange-Id: If7603028bb040c3679c042307b8950bbd3f12c4d\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "734476bedc61c6faaed7038131ac63f72ef2aac4", "tree": "75c6a24fbbeed4629899b9992b3e790c25a75def", "parents": [ "f98392584f2e597f279b77f35e7f702f89e9a9b6" ], "author": { "name": "Jeyaprakash Soundrapandian", "email": "jsound@codeaurora.org", "time": "Thu May 03 20:08:15 2012 -0700" }, "committer": { "name": "Jeyaprakash Soundrapandian", "email": "jsound@codeaurora.org", "time": "Sun May 13 11:03:13 2012 -0700" }, "message": "msm: camera: eeprom subdevice support for camera sensor\n\nThe OTP data for calibration is stored in the eeprom. The eeprom\nis registered as a subdevice and necessary functionality is added\nfor reading and fetching data to user space.\n\nChange-Id: I119a31fa7eccc597c92b7c418c8d04c291e294f5\nSigned-off-by: Jeyaprakash Soundrapandian \u003cjsound@codeaurora.org\u003e\n" }, { "commit": "8726caf1e6e2c539cfda6eb399f648bd585a6386", "tree": "847088306d7e0a51487cb15f8eaaa63e334f77c5", "parents": [ "66f0a04f9a08b7b2a5b7700a719fd40745139d92" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu May 10 15:11:35 2012 -0700" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sun May 13 09:24:35 2012 -0700" }, "message": "gpu: ion: Map everything into IOMMU with 64K pages.\n\nDue to performance issues with 4K pages and the IOMMU we should use\n64K pages. However, minimum allocation from ION is 4K so instead of\nmapping on demand we need to map the full heap into the IOMMU when\nthe first request for mapping comes. Only unmap everything from the\nIOMMU when the last buffer is freed.\n\nCRs-fixed: 348606\nChange-Id: Ic1793f5caaff2f69bf1fb7e8c8b3bd03378131b8\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "6329bf0a03811f4644a4c8d50bf241f6db6f19b5", "tree": "3b92221c0536e4cfc414a3ff36483de00a739e96", "parents": [ "2c653ad630abce4b447292fbfb20d48c2136a13d" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Thu Feb 23 10:55:02 2012 +0000" }, "committer": { "name": "Jin Hong", "email": "jinh@codeaurora.org", "time": "Sat May 12 21:53:36 2012 -0700" }, "message": "ipsec: be careful of non existing mac headers\n\nNiccolo Belli reported ipsec crashes in case we handle a frame without\nmac header (atm in his case)\n\nBefore copying mac header, better make sure it is present.\n\nBugzilla reference: https://bugzilla.kernel.org/show_bug.cgi?id\u003d42809\n\nReported-by: Niccolò Belli \u003cdarkbasic@linuxsystems.it\u003e\nTested-by: Niccolò Belli \u003cdarkbasic@linuxsystems.it\u003e\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n\nCRs-Fixed: 344300\nChange-Id: Ic2d8f3f6b90233d6e87741373c33ef510b35aaa5\nSigned-off-by: Jin Hong \u003cjinh@codeaurora.org\u003e\n" }, { "commit": "aa71a8fc08516d0bee46502337bf0dff1e10c5da", "tree": "4a9d9e3343e08cd227a0beefacbd0e521530aff8", "parents": [ "ba0e4a0d34e5da3ec98f14876a398e1bec46b908", "d00f9c7cc02bff488ffb377015bc63221896c9b3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 12 14:14:56 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 12 14:14:56 2012 -0700" }, "message": "Merge \"of/gpio: Add new method for getting gpios under different property names\" into msm-3.0" }, { "commit": "ba0e4a0d34e5da3ec98f14876a398e1bec46b908", "tree": "c02d0805f4f3446dc03d68e4db7d5b2350622c87", "parents": [ "85abff600f754842161beb48d20d8ddcf104d70b", "77d0bb3d8e93d74859951a3f1d4a2f58488d627a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 12 14:14:54 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 12 14:14:54 2012 -0700" }, "message": "Merge \"media: rc: Add support for Universal Electronics(UE) remote control keymap\" into msm-3.0" }, { "commit": "d68d2698aabf6993c6772c04c5d1d126b94bd3f4", "tree": "4ca819b38ee76cfc7f1155bdb7f2919693d49df6", "parents": [ "19ac8d318b4cf76d097df9efaa5916cfb433982d", "04baee94ede7fc27d0878e1734b694d0052a6244" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 12 14:14:49 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 12 14:14:49 2012 -0700" }, "message": "Merge \"ASoC: msm: enhance MI2S CPU driver for bi-directional support\" into msm-3.0" }, { "commit": "7cb31935eac24648db4facfbe91afb53cfae3063", "tree": "3ebbbca21b8a2c9a53c4ef2434b6f0e3ea792be1", "parents": [ "2c653ad630abce4b447292fbfb20d48c2136a13d", "c579020876e8546210cda68fe5863858072cf40c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 12 11:58:02 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 12 11:58:02 2012 -0700" }, "message": "Merge \"mfd: PM8018: Add GPIO digital voltage level definitions\" into msm-3.0" }, { "commit": "04baee94ede7fc27d0878e1734b694d0052a6244", "tree": "58340965148d8fb7a71cb37a6497a195b880a601", "parents": [ "5bf64d440c17790fa1f9eb55d4ffd5c86bbbbc4b" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Tue May 01 14:38:47 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 12 03:37:36 2012 -0600" }, "message": "ASoC: msm: enhance MI2S CPU driver for bi-directional support\n\nMI2S block has 4 serial data lines. They can be configured to\neither Rx or TX direction. Existing driver only supports uni-direction\ndata transfer. Instead of registering two CPU DAIs for Tx and Rx direction,\nupdate CPU DAI driver to register bi-directional CPU DAIs as Tx and Rx\nshare same bit clock and word select. Channel min and max of DAI depends\non Rx and Tx serial data line configuration passed as platform data.\n\nChange-Id: I327999a4b84252121f54f91bd6451eebde4919ca\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "5bf64d440c17790fa1f9eb55d4ffd5c86bbbbc4b", "tree": "39fceec4197f5b1d5df7ad76e38476f577e3a65e", "parents": [ "dcdf14ddeb22a09f3e032e15cdba0a4a108f4b4a", "a65161a8a7814034ad3e2b55df645b2f1854d55f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri May 11 23:53:31 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri May 11 23:53:31 2012 -0700" }, "message": "Merge \"iopoll: Tweak min sleep time used with usleep_range()\" into msm-3.0" }, { "commit": "dcdf14ddeb22a09f3e032e15cdba0a4a108f4b4a", "tree": "7c01a54f08f654e2fab5ebc9934c9dab52e13625", "parents": [ "16d80a467ce697addb71406d59b5bca7725f68b5", "6f53088ba27a28dc4b894180695538dfffaa7ef7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri May 11 23:53:29 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri May 11 23:53:29 2012 -0700" }, "message": "Merge \"ASoc: msm: Multi channel AAC clips don\u0027t play\" into msm-3.0" }, { "commit": "ffecb7c18a32ecb139525ccee0ffab1129994779", "tree": "c8c57c06ca9e143c4fbe70f075fefbda298be475", "parents": [ "ac095459e5c4e2b34ab5349e5101e7a4aba9636b", "4d57d369ef2f5a675ed7f5404b4a2338fe28efad" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri May 11 18:18:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri May 11 18:18:17 2012 -0700" }, "message": "Merge changes Iab397c4f,I166ce7b5 into msm-3.0\n\n* changes:\n usb: gadget: HSIC wake from suspend workaround\n msm: usb_bam: Fix null pointer reference in connect_pipe\n" }, { "commit": "2404497ce5f908972fc83c6e18f7b3fa7f39a17b", "tree": "fd2931bac5c32bdd63f92d58f026884f3f35479a", "parents": [ "26751dbc801820d092b10ed903be2d6cae8a7c90", "e5bb35ea3dc2a48f2eb66290fa929f701b76467b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri May 11 18:17:59 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri May 11 18:17:59 2012 -0700" }, "message": "Merge \"usb: gadget: Add remote wakeup support to f_rmnet BAM-BAM\" into msm-3.0" }, { "commit": "fa11f1c843f99fd3ee830c9c33a1a152d841ce91", "tree": "1299c649f74df7c5c3a1742504c9851b0294f959", "parents": [ "6de833ffe22f87d640af3dcf824916f7f40f838d", "2c2be149d6fe49db4840702d0c522a6a9e11b13c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri May 11 18:17:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri May 11 18:17:42 2012 -0700" }, "message": "Merge changes I983bf71c,Ia3571868 into msm-3.0\n\n* changes:\n media: dvb: Support dvb devices for MPQ\n media: dvb: dvb-core: Add new features for MPQ use-cases\n" }, { "commit": "d00f9c7cc02bff488ffb377015bc63221896c9b3", "tree": "a3b3b77aca82b4a9f541283747c2e57779d82548", "parents": [ "a32cd525fb4931bdd35de9c21794bf16d5b0bd64" ], "author": { "name": "John Bonesio", "email": "bones@secretlab.ca", "time": "Mon Jun 27 16:49:57 2011 -0700" }, "committer": { "name": "Sathish Ambley", "email": "sambley@codeaurora.org", "time": "Fri May 11 15:18:52 2012 -0700" }, "message": "of/gpio: Add new method for getting gpios under different property names\n\nThis patch adds a new routine, of_get_named_gpio_flags(), which takes the\nproperty name as a parameter rather than assuming \"gpios\".\n\nof_get_gpio_flags() is modified to call of_get_named_gpio_flags() with \"gpios\"\nas the property parameter.\n\nSigned-off-by: John Bonesio \u003cbones@secretlab.ca\u003e\n[grant.likely: Tidied up whitespace and tweaked kerneldoc comments.]\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n\nChange-Id: I11a9e555a0e08f9c3dc94581edb8a54bab562ae3\nSigned-off-by: Sathish Ambley \u003csambley@codeaurora.org\u003e\n" }, { "commit": "fcd277643c87b2ad29d91076fc4ccfe902029011", "tree": "7d9e2076dd088ef0ee113819ac5c4cf6a0d699c7", "parents": [ "8d21d64d4028a7ef2df1340c6ad4f11073781c42", "0977510e0f72b2f1a24f41d5154c2f1b80c96d9a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 10 13:56:31 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 10 13:56:31 2012 -0700" }, "message": "Merge \"base: genlock: remove BIT macro usage\" into msm-3.0" } ], "next": "a65161a8a7814034ad3e2b55df645b2f1854d55f" }