)]}'
{
  "log": [
    {
      "commit": "c8ac32e4711639c81e5f4d4cd78c8f21675a2bae",
      "tree": "3ec6572d74cf2fc824a8176aa5f3adeac04002ed",
      "parents": [
        "2b7300513b98e05058a803de3beb8a1c0a0c61d9"
      ],
      "author": {
        "name": "Manuel Lauss",
        "email": "mano@roarinelk.homelinux.net",
        "time": "Wed Jan 07 16:37:34 2009 +0100"
      },
      "committer": {
        "name": "Jean Delvare",
        "email": "khali@linux-fr.org",
        "time": "Wed Jan 07 16:37:34 2009 +0100"
      },
      "message": "hwmon: (lm70) Add TI TMP121 support\n\nThe Texas Instruments TMP121 is a SPI temperature sensor very similar\nto the LM70, with slightly higher resolution.  This patch extends the\nLM70 driver to support the TMP121.  The TMP123 differs in pin assign-\nment.\n\nSigned-off-by: Manuel Lauss \u003cmano@roarinelk.homelinux.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n"
    },
    {
      "commit": "2b7300513b98e05058a803de3beb8a1c0a0c61d9",
      "tree": "279b61da3b204e44bc52ad62a4836e28ffce1bde",
      "parents": [
        "0589c2de643ef71a684ba6d219532f9e2a3e554b"
      ],
      "author": {
        "name": "Kaiwan N Billimoria",
        "email": "kaiwan@designergraphix.com",
        "time": "Wed Jan 07 16:37:34 2009 +0100"
      },
      "committer": {
        "name": "Jean Delvare",
        "email": "khali@linux-fr.org",
        "time": "Wed Jan 07 16:37:34 2009 +0100"
      },
      "message": "hwmon: (lm70) Code streamlining and cleanup\n\nThis fixes a byteswap bug in the LM70 temperature sensor driver,\nwhich was previously covered up by a converse bug in the driver\nfor the LM70EVAL-LLP board (which is also fixed).\n\nOther fixes:  doc updates, remove an annoying msleep(), and improve\nthree-wire protocol handling.\n\nSigned-off-by: Kaiwan N Billimoria \u003ckaiwan@designergraphix.com\u003e\n[ dbrownell@users.sourceforge.net: doc and whitespace tweaks ]\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n"
    },
    {
      "commit": "e1a8e913f97e36cc5a23a24a8b4717e84998f13c",
      "tree": "3ee23138ab7acba7a8ceb8f38f14eecac055141e",
      "parents": [
        "060b2f5584bf3bbb0268c83c24d5a506780fb702"
      ],
      "author": {
        "name": "Kaiwan N Billimoria",
        "email": "kaiwan@designergraphix.com",
        "time": "Mon Jun 12 22:00:05 2006 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Thu Jun 22 11:10:35 2006 -0700"
      },
      "message": "[PATCH] lm70: New hardware monitoring driver\n\nThis driver implements support for the National Semiconductor LM70\ntemperature sensor.\n\nThe LM70 temperature sensor chip supports a single temperature sensor.\nIt communicates with a host processor (or microcontroller) via an\nSPI/Microwire Bus interface.\n\nCommunication with the LM70 is simple: when the temperature is to be sensed,\nthe driver accesses the LM70 using SPI communication: 16 SCLK cycles\ncomprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2\u0027s\ncomplement digital temperature (sent via the SIO line), is available in the\ndriver for interpretation. This driver makes use of the kernel\u0027s in-core\nSPI support.\n\nSigned-off-by: Kaiwan N Billimoria \u003ckaiwan@designergraphix.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    }
  ]
}