)]}' { "log": [ { "commit": "e4c7112b5686c70ba7be86dbc83c989c75aca802", "tree": "3c3e11ddee39d18eea78ee1d61307da9ff38aaf8", "parents": [ "a345c7856e52bf8b21a5ae6a24fb824bfedefbe9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jan 18 07:21:26 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:52:31 2010 -0800" }, "message": "alim15x3: fix handling of UDMA enable bit\n\nClear UDMA enable bit also for PIO modes.\n\nBased on libata pata_ali host driver.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a345c7856e52bf8b21a5ae6a24fb824bfedefbe9", "tree": "b4e2b8a570a03ca320763c07f2512972b98fc876", "parents": [ "5740345b877e2c8745cdf454674b45919679f231" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jan 18 07:21:19 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:52:31 2010 -0800" }, "message": "alim15x3: fix handling of DMA timings\n\nStop depending on the BIOS setup.\n\nBased on libata pata_ali host driver.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5740345b877e2c8745cdf454674b45919679f231", "tree": "2086557997f52c38a8e9f86d85f2055b20b8f336", "parents": [ "cde727be967a86aee01042f35c8a861728272cf1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jan 18 07:21:12 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:52:30 2010 -0800" }, "message": "alim15x3: fix handling of command timings\n\nStop depending on the BIOS setup.\n\nBased on libata pata_ali host driver.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cde727be967a86aee01042f35c8a861728272cf1", "tree": "940b60eaf2c106337677ce06b9557816e90044b6", "parents": [ "8e714a074bc4da070807d019d4287dcd32af55f5" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jan 18 07:21:05 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:52:30 2010 -0800" }, "message": "alim15x3: fix handling of address setup timings\n\nAccount for the requirements of the other device on the port.\n\nBased on libata pata_ali host driver.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8776168ca2151850164af1de5565d01f7b8b2c53", "tree": "28a44a3a649e1ab98f89674a06cc4c135a16d243", "parents": [ "e085b3cae85af47eb0a3eda3186bd898310fb322" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jan 19 01:45:29 2010 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:45:29 2010 -0800" }, "message": "ide: change -\u003eset_dma_mode method parameters\n\nChange -\u003eset_dma_mode method parameters to match -\u003eset_dmamode method\nused in struct ata_port_operations.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e085b3cae85af47eb0a3eda3186bd898310fb322", "tree": "7f7fea27f1398558a63e58b2f52347ae93383bac", "parents": [ "3fccaa192b9501e79a57e02e62b6bf420d2b461e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jan 19 01:44:41 2010 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:44:41 2010 -0800" }, "message": "ide: change -\u003eset_pio_mode method parameters\n\nChange -\u003eset_pio_mode method parameters to match -\u003eset_piomode method\nused in struct ata_port_operations.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d23f33de3c7fdc4bcbdd7a75d3f7b7be32caf18e", "tree": "c8a89fabc481fb43f59e729a473b897a77274736", "parents": [ "5f6bd68ef539402b25e25d5e3324c59004541d77" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jan 18 07:18:07 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:24:57 2010 -0800" }, "message": "alim15x3: cleanup ali_cable_detect()\n\nRemove leftover local_irq_[save,restore]() and FIXME note.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5f6bd68ef539402b25e25d5e3324c59004541d77", "tree": "1e8de7864ba6a2000af5ac05739b69d9dd4c3cc8", "parents": [ "293f18ad720f7c10f9f4b8a87827a1f0989e19ee" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jan 18 07:17:59 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:24:57 2010 -0800" }, "message": "alim15x3: remove superfluous locking from ali_set_pio_mode()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "293f18ad720f7c10f9f4b8a87827a1f0989e19ee", "tree": "6ffc8c3e755ad8c7d965cbd51caca4949974561f", "parents": [ "3c8cc8df5a67a539cd185026e6b6f49b576869ba" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jan 18 07:17:50 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:24:56 2010 -0800" }, "message": "alim15x3: add ali_fifo_control() helper\n\nBased on libata pata_ali host driver.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3c8cc8df5a67a539cd185026e6b6f49b576869ba", "tree": "a2c042b8768ee08d5f99cd711698a237c6ccdebb", "parents": [ "2b7d03a5cdace237525643d48918e68fe24681ed" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jan 18 07:17:37 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 01:24:56 2010 -0800" }, "message": "alim15x3: fix PIO timings calculations\n\nJust use the standard ide_timing_compute() helper to calculate\nPIO timings. This fixes many issues with the open-coded version\nlike potential recovery timings underclocking or not accounting\nfor the enhanced cycle time specified by the device.\n\nBased on libata pata_ali host driver.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2db3dae51c1a096cfbd0e6f14c5ecca16e79a1d0", "tree": "6d1efa7a9a330d08936f5a5ed43691e147434119", "parents": [ "22763c5cf3690a681551162c15d34d935308c8d7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Dec 03 17:25:57 2009 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Dec 03 17:25:57 2009 +0100" }, "message": "alim15x3: remove obsolete and dangerous wdc_udma parameter\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "03682411b1ccd38cbde2e9a6ab43884ff34fbefc", "tree": "f7a3ff8194d31d704e4b9a300e401a0b59694e34", "parents": [ "23a39eede5f04eb8c4e8d6622231d98fe46bdc65" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Thu Apr 30 18:38:01 2009 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Apr 30 18:38:01 2009 +0200" }, "message": "alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC\n\nSome time ago we had to disable init_hwif callback for PowerPC builds.\nThat was because of a historical IRQ overwrite in the driver, which\nwas causing IDE malfunction on the MPC8610HPCD PowerPC boards.\n\nIt\u0027s unclear whether this overwrite is still useful, but it is proven\nto cause a bit of harm, and today some PowerPC targets (Xilinx ML510,\nas reported by Roderick Colenbrander) need the init_hwif, so we have\nto re-enable it and remove the overwrite.\n\nReported-by: Roderick Colenbrander \u003cthunderbird2k@gmail.com\u003e\nSuggested-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8a4a5738ba499083cf4c5668895efe220b1946d3", "tree": "78272b711b31f43526d2c665478cc3bdb0b6e393", "parents": [ "7526efaafdc835b8d6b22aa1a302e14651373908" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Mar 31 20:15:21 2009 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Mar 31 20:15:21 2009 +0200" }, "message": "ide: add -\u003edma_check method\n\n* Add (an optional) -\u003edma_check method for checking if DMA can be\n used for a given command and fail DMA setup in ide_dma_prepare()\n if necessary.\n\n* Convert alim15x3 and trm290 host drivers to use -\u003edma_check.\n\n* Rename ali15x3_dma_setup() to ali_dma_check() while at it.\n\nThere should be no functional changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "35c9b4daf4c94b30e5cede597d98016ebf31b5ad", "tree": "3248b5b3602218537ce0bce420fbde27a07b526b", "parents": [ "e698ea83a8531a6740dc657329dcf0728392d6ac" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Mar 31 20:15:19 2009 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Mar 31 20:15:19 2009 +0200" }, "message": "ide: add -\u003edma_clear method and remove -\u003edma_timeout one\n\nAll custom -\u003edma_timeout implementations call the generic one thus it is\npossible to have only an optional method for resetting DMA engine instead:\n\n* Add -\u003edma_clear method and convert hpt366, pdc202xx_old and sl82c105\n host drivers to use it.\n\n* Always use ide_dma_timeout() in ide_dma_timeout_retry() and remove\n -\u003edma_timeout method.\n\n* Make ide_dma_timeout() static.\n\nThere should be no functional changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "22117d6eaac50d366d9013c88318a869ea4d8739", "tree": "7dae55b028f8c7c249341f026257f94c88eed3cf", "parents": [ "60c0cd02b254805691cdc61101ada6af7bd56fde" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Mar 27 12:46:47 2009 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Mar 27 12:46:47 2009 +0100" }, "message": "ide: add -\u003edma_timer_expiry method and remove -\u003edma_exec_cmd one (v2)\n\n* Rename dma_timer_expiry() to ide_dma_sff_timer_expiry() and export it.\n\n* Add -\u003edma_timer_expiry method and use it to set hwif-\u003eexpiry for\n ATA_PROT_DMA protocol in do_rw_taskfile().\n\n* Initialize -\u003edma_timer_expiry to ide_dma_sff_timer_expiry() for SFF hosts.\n\n* Move setting hwif-\u003eexpiry from ide_execute_command() to its users and drop\n \u0027expiry\u0027 argument.\n\n* Use ide_execute_command() instead of -\u003edma_exec_cmd in do_rw_taskfile().\n\n* Remove -\u003edma_exec_cmd method and its implementations.\n\n* Unexport ide_execute_command() and ide_dma_intr().\n\nv2:\n* Fix CONFIG_BLK_DEV_IDEDMA\u003dn build (noticed by Randy Dunlap).\n\n* Fix *dma_expiry naming (suggested by Sergei Shtylyov).\n\nThere should be no functional changes caused by this patch.\n\nCc: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2298169418f43ba5e0919762a4bab95a1227872a", "tree": "67cf3133c7bae747ad957c68a650534105a7d8e7", "parents": [ "130e886708d6e11f3d54e5d27c266578de56f343" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Mar 27 12:46:46 2009 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Mar 27 12:46:46 2009 +0100" }, "message": "ide: pass command to ide_map_sg()\n\n* Set IDE_TFLAG_WRITE flag and -\u003erq also for ATA_CMD_PACKET\n commands.\n\n* Pass command to -\u003edma_setup method and update all its\n implementations accordingly.\n\n* Pass command instead of request to ide_build_sglist(),\n *_build_dmatable() and ide_map_sg().\n\nWhile at it:\n\n* Fix scc_dma_setup() documentation + use ATA_DMA_WR define.\n\n* Rename sgiioc4_build_dma_table() to sgiioc4_build_dmatable(),\n change return value type to \u0027int\u0027 and drop unused \u0027ddir\u0027\n argument.\n\n* Do some minor cleanups in [tx4939]ide_dma_setup().\n\nThere should be no functional changes caused by this patch.\n\nAcked-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2ed0ef543ae3f3ea4f8bd0433fb1fed22625a309", "tree": "44777820dcef08ed0fc4b9583bf982220ba15154", "parents": [ "a182807a89946bd531122bb2da60fa9ceee90343" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Mar 24 23:22:53 2009 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Mar 24 23:22:53 2009 +0100" }, "message": "ide: fix -\u003einit_chipset method to return \u0027int\u0027 value\n\n* Return 0 instead of dev-\u003eirq in -\u003einit_chipset implementations.\n\n* Fix -\u003einit_chipset method to return \u0027int\u0027 value instead of\n \u0027unsigned int\u0027 one.\n\nThis fixes -\u003einit_chipset handling for host drivers (cs5530, hpt366\nand pdc202xx_new) for which it is possible for this method to fail.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "592b5315219881c6c0af4785f96456ad2043193a", "tree": "2b330d7b4880c10013a9e3e86b5cf18160aed785", "parents": [ "3f023b0138b7db21bac0074b3d5ca2854372c6ff" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Jan 06 17:21:02 2009 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jan 06 17:21:02 2009 +0100" }, "message": "ide: move read_sff_dma_status() method to \u0027struct ide_dma_ops\u0027\n\nMove apparently misplaced read_sff_dma_status() method from \u0027struct ide_tp_ops\u0027\nto \u0027struct ide_dma_ops\u0027, renaming it to dma_sff_read_status() and making only\nrequired for SFF-8038i compatible IDE controller drivers (greatly cutting down\nthe number of initializers) as its only user (outside ide-dma-sff.c and such\ndrivers) appears to be ide_pci_check_simplex() which is only called for such\ncontrollers...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3f023b0138b7db21bac0074b3d5ca2854372c6ff", "tree": "3142f3c13640c040d12bc4335635cd544be41760", "parents": [ "391ad1908a9c13d457ea12ce1508d6b8a7ba72ad" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Jan 06 17:21:01 2009 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jan 06 17:21:01 2009 +0100" }, "message": "ide: don\u0027t set hwif-\u003edma_ops in init_dma() method\n\nReplace setting of \u0027hwif-\u003edma_ops\u0027 in the \u0027alim15x3\u0027 and \u0027palm_bk3710\u0027 drivers\u0027\ninit_dma() methods with initializing the corresponding member of their \u0027struct\nide_port_info\u0027 instances and remove such setting from the \u0027hpt366\u0027 driver that\njust doesn\u0027t use \u0027sff_dma_ops\u0027. Along with some code save, this prepares us for\nthe next patch...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "898ec223fea2a2df88035e58dbf50f493577e225", "tree": "93e6a4b6a4f518f15743786751cd39b9715f5558", "parents": [ "b40d1b88f1001f0224c63fa2c008914514bcef33" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jan 06 17:20:52 2009 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jan 06 17:20:52 2009 +0100" }, "message": "ide: remove HWIF() macro\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b65fac32cfe3b2f98cd472fef400bd1c1340de23", "tree": "493a7e30e23e5413a9e5ad6102b8e91ebc02c069", "parents": [ "5b31f855f10d0053e738baa6d91fb6a3fad35119" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jan 06 17:20:50 2009 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jan 06 17:20:50 2009 +0100" }, "message": "ide: merge ide_hwgroup_t with ide_hwif_t (v2)\n\n* Merge ide_hwgroup_t with ide_hwif_t.\n\n* Cleanup init_irq() accordingly, then remove no longer needed\n ide_remove_port_from_hwgroup() and ide_ports[].\n\n* Remove now unused HWGROUP() macro.\n\nWhile at it:\n\n* ide_dump_ata_error() fixups\n\nv2:\n* Fix -\u003equirk_list check in do_ide_request()\n (s/hwif-\u003ecur_dev/prev_port-\u003ecur_dev).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "95964018d53f479529dfdc2b46fe30c0a14a00e0", "tree": "b14bdb97a982fe9e6239996340f23f288f28e46e", "parents": [ "a3663801b1bb1b6f6e2be5198cc81bc16f1558fd" ], "author": { "name": "Hannes Eder", "email": "hannes@hanneseder.net", "time": "Tue Dec 02 20:40:04 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Dec 02 20:40:04 2008 +0100" }, "message": "alim15x3: fix sparse warning\n\nFix this sparse warning:\n\n drivers/ide/alim15x3.c:594:2: warning: returning void-valued expression\n\nSigned-off-by: Hannes Eder \u003channes@hanneseder.net\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ccd32e221c3e3797ac56305c554ad8b07c13c815", "tree": "268b210e3fe31b7de7f06ba1e88aaa681f4d9b6e", "parents": [ "9bd27cba1aeacb6b12d05f4e5ed6361072f08fe0" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Sun Nov 02 21:40:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sun Nov 02 21:40:08 2008 +0100" }, "message": "ide: Switch to a common address\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2bfba3c444fe8b2ab1c38112a89d8f03b61136ca", "tree": "17580eee63d868c9d6b97a6bc956a08f25631532", "parents": [ "2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 21 20:57:23 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 21 20:57:23 2008 +0200" }, "message": "ide: remove useless subdirs from drivers/ide/\n\nSuggested-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "653bcf5292a9ac4ffc07315198f0ef995e0646a8", "tree": "b13dcb203ecce6bd87297d9652be0a08d3528080", "parents": [ "f5e0b5ecb3afc8050259003067b6a1aef3635f12" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:46 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:46 2008 +0200" }, "message": "ide: __ide_dma_end() -\u003e ide_dma_end()\n\nWhile at it:\n- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a9ab09e26055a76295548ca36ec00de2f4367d32", "tree": "51f1c279e74e3d5b3ec920b33fae579339dd67ad", "parents": [ "d6ff9f64e68d23feab44efa07cc6aee01f3ef32b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:41 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:41 2008 +0200" }, "message": "ide: use unique names for struct pci_driver instances\n\nNoticed-by: Russell King \u003crmk+lkml@arm.linux.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "123995b97136cb41fa282f0ed2385f2c8066df96", "tree": "39b994f29bac4dc931be9abdde1e7f5412692856", "parents": [ "8595259ccb6a13b9aab31832ce874d157064d256" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:40 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:40 2008 +0200" }, "message": "ide: use \u0027drive-\u003edn \u0026 1\u0027 instead of drive-\u003eselect.b.unit\n\n* Call ide_port_init_devices() in ide_host_register()\n also if \u0027struct ide_port_info *d\u0027 is not available.\n\n* Init drive-\u003edn in ide_port_init_devices() instead of\n ide_probe_port() so it is valid also in -\u003einit_dev.\n\n* Pass device number to ide_dev_apply_params().\n\n* Use \u0027drive-\u003edn \u0026 1\u0027 instead of drive-\u003eselect.b.unit.\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "feb22b7f8e62b1b987a3a1dbad95af767a1df832", "tree": "428e5294a077fc629caa3706396e835b164eee7c", "parents": [ "1785192b5310ee25165768f5bb80f13146788e3e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:32 2008 +0200" }, "message": "ide: add proper PCI PM support (v2)\n\n* Keep pointer to -\u003einit_chipset method also in\n struct ide_host and set it in ide_host_alloc_all().\n\n* Add ide_pci_suspend() and ide_pci_resume() helpers\n (default -\u003esuspend and -\u003eresume implementations).\n\n* -\u003einit_chipset can no longer be marked __devinit.\n\n* Add proper PCI PM support to IDE PCI host drivers\n (rz1000.c and tc86c001.c are skipped for now since\n they need to be converted from using -\u003einit_hwif\n to use -\u003einit_chipset instead).\n\nv2:\n* Cleanup CONFIG_PM #ifdef-s per akpm\u0027s suggestion.\n\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCc: \"Rafael J. Wysocki\" \u003crjw@sisk.pl\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3ceca727fe3a38dd8d7a3adf938fefda83eee8af", "tree": "61fb443f0e1a260110f63b23f236605677dd85a6", "parents": [ "7c51c17e0431d2f26bc23ee07de12eafb125ce83" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "message": "ide: include \u003clinux/hdreg.h\u003e only when needed\n\n* Include \u003clinux/ata.h\u003e directly in \u003clinux/ide.h\u003e\n instead of through \u003clinux/hdreg.h\u003e.\n\n* Include \u003clinux/hdreg.h\u003e only when needed.\n\nCc: Christoph Hellwig \u003chch@infradead.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4dde4492d850a4c9bcaa92e5bd7f4eebe3e2f5ab", "tree": "ee3be70390e4c617b44329edef0a05039f59c81a", "parents": [ "5b90e990928919ae411a68b865e8a6ecac09a603" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:19 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:19 2008 +0200" }, "message": "ide: make drive-\u003eid an union (take 2)\n\nMake drive-\u003eid an unnamed union so id can be accessed either by using\n\u0027u16 *id\u0027 or \u0027struct hd_driveid *driveid\u0027. Then convert all existing\ndrive-\u003eid users accordingly (using \u0027u16 *id\u0027 when possible).\n\nThis is an intermediate step to make ide \u0027struct hd_driveid\u0027-free.\n\nWhile at it:\n\n- Add missing KERN_CONTs in it821x.c.\n\n- Use ATA_ID_WORDS and ATA_ID_*_LEN defines.\n\n- Remove unnecessary checks for drive-\u003eid.\n\n- s/drive_table/table/ in ide_in_drive_list().\n\n- Cleanup ide_config_drive_speed() a bit.\n\n- s/drive1/dev1/ \u0026 s/drive0/dev0/ in ide_undecoded_slave().\n\nv2:\nFix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell)\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f454cbe8cd38b6d447e74ddaf012017fea42717e", "tree": "12b53fb8f50a0197411d39c570ac525bf6c616ad", "parents": [ "36de994809264f752e51b74e77a9c49091d14230" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Aug 05 18:17:04 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Aug 05 18:17:04 2008 +0200" }, "message": "ide: -\u003ecable_detect method cannot be marked __devinit\n\nNow that we have warm-plug support -\u003ecable_detect method no longer\ncan be be marked __devinit.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a326b02b0c576001353dbc489154959b0889c6bf", "tree": "e56e768bcd078778fb4a0202a4be8e1a4460765f", "parents": [ "ced3ec8aa7d0fa3300187ee47c144a22ccfc974e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:33 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:33 2008 +0200" }, "message": "ide: drop \u0027name\u0027 parameter from -\u003einit_chipset method\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ced3ec8aa7d0fa3300187ee47c144a22ccfc974e", "tree": "ea48651fe1b372685020cd67ac133240829c1576", "parents": [ "04ba6e739e9c0623c25f94b191fd20dfbd1b26e3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:32 2008 +0200" }, "message": "ide: prefix messages from IDE PCI host drivers by driver name\n\nPrefix messages from IDE PCI host drivers by driver name instead of marketed\nchipset name (it is still possible to exactly identify the particular chipset\nbasing on driver messages).\n\nAs a bonus this provides nice code savings for some drivers:\n\n text data bss dec hex filename\n 3826 112 8 3946 f6a drivers/ide/pci/amd74xx.o.before\n 2786 112 8 2906 b5a drivers/ide/pci/amd74xx.o.after\n 764 108 0 872 368 drivers/ide/pci/cs5520.o.before\n 680 108 0 788 314 drivers/ide/pci/cs5520.o.after\n 1680 112 4 1796 704 drivers/ide/pci/generic.o.before\n 1155 112 4 1271 4f7 drivers/ide/pci/generic.o.after\n 7128 792 0 7920 1ef0 drivers/ide/pci/hpt366.o.before\n 6984 792 0 7776 1e60 drivers/ide/pci/hpt366.o.after\n 2800 148 0 2948 b84 drivers/ide/pci/pdc202xx_new.o.before\n 2523 148 0 2671 a6f drivers/ide/pci/pdc202xx_new.o.after\n 2831 148 0 2979 ba3 drivers/ide/pci/pdc202xx_old.o.before\n 2683 148 0 2831 b0f drivers/ide/pci/pdc202xx_old.o.after\n 3776 112 4 3892 f34 drivers/ide/pci/piix.o.before\n 2804 112 4 2920 b68 drivers/ide/pci/piix.o.after\n 4693 116 0 4809 12c9 drivers/ide/pci/siimage.o.before\n 4600 116 0 4716 126c drivers/ide/pci/siimage.o.after\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8ee3f3b69d9c37f86a45862f53451699ec77fe12", "tree": "e0195480c432a9c43ccfabc54fe7732d25f96b36", "parents": [ "eb7cb98b1cc8be1d4395d9accf49ae3924cd68f1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:19 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:19 2008 +0200" }, "message": "alim15x3: add -\u003eremove method and module_exit()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6cdf6eb357c2681596b7b1672b92396ba82333d4", "tree": "a6194373c64616ecb3d1af2c9247a32f50543f97", "parents": [ "8c2eece50a368c7986bae0b3e52739558dd71b51" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:14 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:14 2008 +0200" }, "message": "ide: add -\u003edev and -\u003ehost_priv fields to struct ide_host\n\n* Add \u0027struct device *dev[2]\u0027 and \u0027void *host_priv\u0027 fields\n to struct ide_host.\n\n* Set -\u003edev[] in ide_host_alloc_all()/ide_setup_pci_device[s]().\n\n* Pass \u0027void *priv\u0027 argument to ide_setup_pci_device[s]()\n and use it to set -\u003ehost_priv.\n\n* Set PCI dev\u0027s -\u003edriver_data to point to the struct ide_host\n instance if PCI host driver wants to use -\u003ehost_priv.\n\n* Rename ide_setup_pci_device[s]() to ide_pci_init_{one,two}().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ebb00fb55d0566bb3e81518122a57b4b3bedf1e4", "tree": "d8a717bf0e4556a71ba71579a6d5cedfa5bad980", "parents": [ "81e8d5a34f7d2a2acbe309cfa5810a9699a63239" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:51 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:51 2008 +0200" }, "message": "ide: factor out simplex handling from ide_pci_dma_base()\n\n* Factor out simplex handling from ide_pci_dma_base() to\n ide_pci_check_simplex().\n\n* Set hwif-\u003edma_base early in -\u003einit_dma method / ide_hwif_setup_dma()\n and reset it in ide_init_port() if DMA initialization fails.\n\n* Use -\u003eread_sff_dma_status instead of -\u003eINB in ide_pci_dma_base().\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "81e8d5a34f7d2a2acbe309cfa5810a9699a63239", "tree": "be8257161e9bbc6f7bd0fe0b7980de94681d3306", "parents": [ "cab7f8eda40d3e3e16b137c67cdddc2cf893c5d7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:51 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:51 2008 +0200" }, "message": "ide: remove ide_setup_dma()\n\nExport sff_dma_ops and then remove ide_setup_dma().\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "288911af1209f5aa6119c9ec6d5a9bdb16a385b5", "tree": "c1fbc9c8fd8ba30e33a52065178477a96aa30203", "parents": [ "2feecface7fd62be75bd4961324dc279a04bef22" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 16 20:33:37 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 16 20:33:37 2008 +0200" }, "message": "alim15x3: convert to use ide_timing_find_mode()\n\nThere should be no functional changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "30e5ee4d1a651a0c66e86c6612c003034bd20ba2", "tree": "5845b35a16b81f263c18708d45398cc695ac21ed", "parents": [ "681a561b7ec7fdcd8f35b68e44ac6d6c70aecc04" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:46 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:46 2008 +0200" }, "message": "ide: remove obsoleted \"idebus\u003d\" kernel parameter\n\n* Remove obsoleted \"idebus\u003d\" kernel parameter.\n\n* Remove no longer needed ide_system_bus_speed() and system_bus_clock()\n (together with idebus_parameter and system_bus_speed variables).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e7f379d5cabb2790ecce5d623382fa6085e7686d", "tree": "c38b2d36fd35f27db369e1091b39e7d47e37db3b", "parents": [ "63b1623ef0e33160d782fd1b0044e9a8af5d16cf" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 14 23:06:16 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 14 23:06:16 2008 +0200" }, "message": "alim15x3: remove WDC_ALI15X3 config option\n\nThere is \"wdc_udma\" module parameter now.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "63b1623ef0e33160d782fd1b0044e9a8af5d16cf", "tree": "064bde66cbf8c2ea9a1df6f23c6db0e3ad6f402a", "parents": [ "2bf111d97a8c05d3fe436caaf18ba0634c9ab33d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 14 23:06:16 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 14 23:06:16 2008 +0200" }, "message": "alim15x3: add \"wdc_udma\" module parameter\n\nAdd \"wdc_udma\" module parameter for allowing UDMA transfers\non M1543C-E chipset for WDC disks.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2bf111d97a8c05d3fe436caaf18ba0634c9ab33d", "tree": "a9d8fa4a63dabe6f6d654ad32ecdaf26176b7aa6", "parents": [ "df98668f178c39c54bc7b9cd3adb99cbd7ed8ada" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 14 23:06:16 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 14 23:06:16 2008 +0200" }, "message": "alim15x3: remove stale warning about ATI RS100 northbridge\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "df98668f178c39c54bc7b9cd3adb99cbd7ed8ada", "tree": "5e9ebe814ab8b1e59f4a8796905b9a384421a9b9", "parents": [ "e0b4eb5193fed5c63413b0c137be29b0477d15ca" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 14 23:06:15 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 14 23:06:15 2008 +0200" }, "message": "alim15x3: trivial cleanup for ali_set_pio_mode()\n\nRemove commented out code and stale comment.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6d1cee44361b8d06ccd1812e80448d86ae60dfe3", "tree": "681769a557a21978b466cf5e1a5756014763d89a", "parents": [ "b26b0c590066f65ff3b1ff438502f3c40ea39520" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Tue Apr 29 22:57:38 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Apr 29 22:57:38 2008 +0200" }, "message": "alim15x3: disable init_hwif_ali15x3 for PowerPC\n\nWe don\u0027t need init_hwif_ali15x3() on the PowerPC systems either.\n\nBefore:\n\nALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0\nALI15X3: 100% native mode on irq 19\n ide0: BM-DMA at 0x1120-0x1127\n ide1: BM-DMA at 0x1128-0x112f\nhda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive\nhda: UDMA/66 mode selected\nide0: Disabled unable to get IRQ 14.\nide0: failed to initialize IDE interface\nide1: Disabled unable to get IRQ 15.\nide1: failed to initialize IDE interface\n\nAfter:\n\nALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0\nALI15X3: 100% native mode on irq 19\n ide0: BM-DMA at 0x1120-0x1127\n ide1: BM-DMA at 0x1128-0x112f\nhda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive\nhda: UDMA/66 mode selected\nide0 at 0x1100-0x1107,0x110a on irq 19\nide1 at 0x1110-0x1117,0x111a on irq 19\nhda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache\n\nide0 works well, though I can\u0027t test ide1, it isn\u0027t traced out on\nthe board.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "19ba7b8f35116dfafcb02bdb745d5015d97d9cb6", "tree": "aeaf933c00d92e06f9083d9d0551e7efed0945d0", "parents": [ "d01dbc3b85d57f3ab89be4291d4739152bb1713a" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@sw.ru", "time": "Sun Apr 27 15:38:33 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sun Apr 27 15:38:33 2008 +0200" }, "message": "ide: remove /proc/ide/ali\n\nBart says: \"can be done from user-space and is not especially interesting\neven when debugging problems (raw PCI config space dump is far more useful).\"\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@openvz.org\u003e\nCc: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ebae41a5a0583fb732c41445df4ac2c41016df74", "tree": "0896acda21576aabf92ff7e7b4b99fac26d9f007", "parents": [ "10569713c78f3c499745651aebc90b0d1c454c28" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sun Apr 27 15:38:29 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sun Apr 27 15:38:29 2008 +0200" }, "message": "ide: add \"vlb|pci_clock\u003d\" parameter\n\n* Add \"vlb_clock\u003d\" parameter for specifying VLB clock frequency (in MHz).\n\n* Add \"pci_clock\u003d\" parameter for specifying PCI bus clock frequency (in MHz).\n\nWhile at it:\n\n* qd65xx.c: rename {active,recovery}_cycle variables to {act,rec}_cyc.\n\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f37afdaca711838b50ecd89b9c15fc745270d77c", "tree": "0580bdac04d7d9ef0cc9f4dc2350ea38141980b5", "parents": [ "5e37bdc081a980dd0d669e6387bcf15ca9666f81" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:24 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:24 2008 +0200" }, "message": "ide: constify struct ide_dma_ops\n\n* Export ide_dma_exec_cmd() and __ide_dma_test_irq().\n\n* Constify struct ide_dma_ops.\n\n* Always set hwif-\u003edma_ops to \u0026sff_dma_ops in ide_setup_dma()\n (it is later overriden by ide_init_port() if needed) and drop\n \u0027const struct ide_port_info *d\u0027 argument.\n\nWhile at it:\n\n* Rename __ide_dma_test_irq() to ide_dma_test_irq().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5e37bdc081a980dd0d669e6387bcf15ca9666f81", "tree": "d842166c3bd23fbf3dfba0ccaa0f9ed5cc3096db", "parents": [ "1fd1890594bd355a4217f5658a34763e77decee3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:24 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:24 2008 +0200" }, "message": "ide: add struct ide_dma_ops (take 3)\n\nAdd struct ide_dma_ops and convert core code + drivers to use it.\n\nWhile at it:\n\n* Drop \"ide_\" prefix from -\u003eide_dma_end and -\u003eide_dma_test_irq methods.\n\n* Drop \"ide_\" \"infixes\" from DMA methods.\n\n* au1xxx-ide.c:\n - use auide_dma_{test_irq,end}() directly in auide_dma_timeout()\n\n* pdc202xx_old.c:\n - drop \"old_\" \"infixes\" from DMA methods\n\n* siimage.c:\n - add siimage_dma_test_irq() helper\n - print SATA warning in siimage_init_one()\n\n* Remove no longer needed -\u003einit_hwif implementations.\n\nv2:\n* Changes based on review from Sergei:\n - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/\n - s/drive-\u003ehwif/hwif/ in idefloppy_pc_intr().\n - fix patch description w.r.t. au1xxx-ide changes\n - fix au1xxx-ide build\n - fix naming for cmd64*_dma_ops\n - drop \"ide_\" and \"old_\" infixes\n - s/hpt3xxx_dma_ops/hpt37x_dma_ops/\n - s/hpt370x_dma_ops/hpt370_dma_ops/\n - use correct DMA ops for HPT302/N, HPT371/N and HPT374\n - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/\n\nv3:\n* Two bugs slipped in v2 (noticed by Sergei):\n - use correct DMA ops for HPT374 (for real this time)\n - handle HPT370/HPT370A properly\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b123f56e04c7c112f754f948198d1ea5a80e649d", "tree": "c58e83e954159d7755aa7f04d433e4c7e25dc330", "parents": [ "f629b38beddf2ff8bc3fda1754bbd6cc7d3acc03" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:22 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:22 2008 +0200" }, "message": "ide: do complete DMA setup in -\u003einit_dma method (take 2)\n\n* Make ide_hwif_setup_dma() return an error value.\n\n* Pass \u0027const struct ide_port_info *d\u0027 instead of \u0027unsigned long dmabase\u0027\n to -\u003einit_dma method and make it return an error value.\n\n* Rename ide_get_or_set_dma_base() to ide_pci_dma_base(),\n change ordering of its arguments and then export it.\n\n* Export ide_pci_set_master().\n\n* Do complete DMA setup inside -\u003einit_dma method and update -\u003einit_dma\n users accordingly.\n\n* Sanitize code for DMA setup in ide_init_port().\n\nv2:\n* Fix for CONFIG_BLK_DEV_IDEDMA_PCI\u003dn configs\n (from Jiri Slaby \u003cjirislaby@gmail.com\u003e):\n\n Fix following compiler warning by returning EINVAL:\n\n In file included from ANYTHING-INCLUDING-IDE.H:45:\n include/linux/ide.h: In function ‘ide_hwif_setup_dma’:\n include/linux/ide.h:1022: warning: no return statement in function returning non-void\n\nCc: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "23658f8af3dbba53ae9796e4c37c2fdd0272662e", "tree": "32b7efcd41555308709b80866611a35866debc92", "parents": [ "6d36b95fe2cc5655e96da42eaf19f1aa341c6856" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:21 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:21 2008 +0200" }, "message": "ide: move ide_setup_dma() call out from -\u003einit_dma method\n\nThere should be no functional changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6d36b95fe2cc5655e96da42eaf19f1aa341c6856", "tree": "62dad8dee924cd31bbb7386674e3160947f8274d", "parents": [ "73369d2a15cfe7dceae89a9e70e3d442e4c21576" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:21 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:21 2008 +0200" }, "message": "alim15x3: skip DMA initialization completely on revs \u003c 0x20\n\nSkip DMA initialization completely on revs \u003c 0x20 by setting IDE_HFLAG_NO_DMA\nhost flag and resetting DMA host masks in alim15x3_init_one() (currently\nide_hwif_setup_dma() will try to obtain DMA base and setup PCI bus-mastering\nbut init_dma_ali15x3() will fail).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ac95beedf8bc97b24f9540d4da9952f07221c023", "tree": "c29837142c8083b6fcaf1767abcb0a4533676cd1", "parents": [ "4a27214d7be31e122db4102166f49ec15958e8e9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:14 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:14 2008 +0200" }, "message": "ide: add struct ide_port_ops (take 2)\n\n* Move hooks for port/host specific methods from ide_hwif_t to\n \u0027struct ide_port_ops\u0027.\n\n* Add \u0027const struct ide_port_ops *port_ops\u0027 to \u0027struct ide_port_info\u0027\n and ide_hwif_t.\n\n* Update host drivers and core code accordingly.\n\nWhile at it:\n\n* Rename ata66_*() cable detect functions to *_cable_detect() to match\n the standard naming. (Suggested by Sergei Shtylyov)\n\nv2:\n* Fix build for bast-ide. (Noticed by Andrew Morton)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5e71d9c5a50b92b33d35061d42ac39166db9578e", "tree": "bbf006e6e64f2d8828766f44249d6d26150ae3a4", "parents": [ "7daf66dd142b1978bf8670d9d959d835de37476f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 17:36:35 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 17:36:35 2008 +0200" }, "message": "ide: IDE_HFLAG_BOOTABLE -\u003e IDE_HFLAG_NON_BOOTABLE\n\n\"bootable\" should be the default behavior so replace\nIDE_HFLAG_BOOTABLE host flag with IDE_HFLAG_NON_BOOTABLE.\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "78829dd9224b62e2092a681afaee1bda4d0cb93b", "tree": "0b8fc5cb873189fb6f40a55289b542104c9868ff", "parents": [ "bfa14b42a3bd671f0287b3db42e703e86ef27b48" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:33 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:33 2008 +0100" }, "message": "ide: remove needless includes from PCI host drivers\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "bfa14b42a3bd671f0287b3db42e703e86ef27b48", "tree": "ad902a99aa59232832d8e663be8d86a615e24114", "parents": [ "c413b9b94d9a8e7548cc4b2e04b7df0439ce76fd" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:31 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:31 2008 +0100" }, "message": "ide: add -\u003ecable_detect method to ide_hwif_t\n\n* Add -\u003ecable_detect method to ide_hwif_t.\n\n* Call the new method in ide_init_port() if:\n - the host supports UDMA modes \u003e UDMA2 (\u0027hwif-\u003eultra_mask \u0026 78\u0027)\n - DMA initialization was successful (if hwif-\u003edma_base is not set\n ide_init_port() sets hwif-\u003eultra_mask to zero)\n - \"idex\u003data66\" is not used (\u0027hwif-\u003ecbl !\u003d ATA_CBL_PATA40_SHORT\u0027)\n\n* Convert PCI host drivers to use -\u003ecable_detect method.\n\nWhile at it:\n\n* Factor out cable detection to separate functions (if not already done).\n\n* hpt366.c/it8213.c/slc90e66.c:\n - don\u0027t check cable type if \"idex\u003data66\" is used\n\n* pdc202xx_new.c:\n - add __devinit tag to pdcnew_cable_detect()\n\n* pdc202xx_old.c:\n - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()\n - add __devinit tag to pdc2026x_old_cable_detect()\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "58f189fccc72bb8a91de1854e519b47d64fbdbaa", "tree": "977aa91b6dd93ab07b22f60f97e8c91533f9125e", "parents": [ "fadd11c71b5a100fb7560b84a6272b8883082726" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "message": "ide: delete filenames/versions from comments\n\nDelete filenames/versions from comments.\n\nI\u0027m leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s\nto maintainers of the respective drivers.\n\nWhile at it:\n\n* Remove unused VERSION define from ide.c.\n\n* Remove unused/stale DRV_VERSION define from au1xxx-ide.c.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "36501650ec45b1db308c3b51886044863be2d762", "tree": "74cf9d9f313e510f8424f9bac35da8d61cce9f7b", "parents": [ "f6fb786d6dcdd7d730e4fba620b071796f487e1b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:31 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:31 2008 +0100" }, "message": "ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_t\n\nKeep pointer to struct device instead of struct pci_dev in ide_hwif_t.\n\nWhile on it:\n* Use *dev-\u003edma_mask instead of pci_dev-\u003edma_mask in ide_toggle_bounce().\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8ac2b42a45896641ed292deaf038a1d2703d85a6", "tree": "fb6c193f4a5f454c36b23c4e972fbe57bb1da6b1", "parents": [ "993da8f9ea7e00d21af49d0e14a131183288bcf8" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:30 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:30 2008 +0100" }, "message": "ide: add IDE_HFLAG_CLEAR_SIMPLEX host flag\n\n* Rename \u0027simplex_stat\u0027 variable to \u0027dma_stat\u0027 in ide_get_or_set_dma_base().\n\n* Factor out code for forcing host out of \"simplex\" mode from\n ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper.\n\n* Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229),\n amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and\n serverworks (for CSB5) host drivers.\n\n* Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag\n instead of checking dev-\u003edevice (BTW the code was buggy because it didn\u0027t\n check for dev-\u003evendor, luckily none of these PCI Device IDs was used by\n some other vendor for PCI IDE controller).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ecf32796395ed0e27667e7f735946d6dc60e1765", "tree": "0cafd743bd39148b85470c8fb6398b30dbce7ffd", "parents": [ "4e5a68aeb6b513ee0adda11642e10e528b7721c0" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Fri Feb 01 23:09:30 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:30 2008 +0100" }, "message": "ide: ide_setup_dma() assumes 8 ports\n\nAccording to http://marc.info/?l\u003dlinux-ide\u0026m\u003d114346138611631, the drivers must\nalways register 8 DMA ports with ide_setup_dma(), so its last argument is not\nneeded. While at it, kill some useless parens in that function...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4db90a145292327b95b03f6dcd3352327235cc36", "tree": "c48ba5fc31e27d6fbdb8883151bdf237e7eb1920", "parents": [ "428c6440ef933a3d9df5adfeb2cbb3ea7ebb6a68" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:18 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:18 2008 +0100" }, "message": "ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag\n\n* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide\n what to do with transfer modes \u003c XFER_PIO_0 in ide_set_xfer_rate().\n\n* Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it\n (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old,\n serverworks, tc86c001 and via82cxxx) and cleanup -\u003eset_dma_mode\n methods in host drivers that don\u0027t (IDE core code guarantees that\n -\u003eset_dma_mode will be called only for modes which are present\n in SWDMA/MWDMA/UDMA masks).\n\nWhile at it:\n\n* Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in\n hpt34x/hpt366/pdc202xx_old/serverworks host driver.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d151456a71e2757da4169a6be2eb68ac115b05b0", "tree": "19a97e8ae869af8c14bbcad53cf0c8a56d7e4dec", "parents": [ "b0bc65b9aa7d9eb8af4895ed772ef7fe2c10687c" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 27 21:35:56 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 27 21:35:56 2007 +0100" }, "message": "alim15x3: add Mitac 8317 and derivatives to ali_cable_override()\n\nPort of Alan\u0027s patch for pata_ali.c.\n\nCc: Alan Cox \u003calan@redhat.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8562043606430185cad26d085d46adcc7ad67fd1", "tree": "efcc9159a230eb62d023d38c465249ddaa252cc6", "parents": [ "039788e1532368eeca1071a873c14e03920cdf38" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:34 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:34 2007 +0200" }, "message": "ide: constify struct ide_port_info\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "039788e1532368eeca1071a873c14e03920cdf38", "tree": "b12c736f5e6c96aebdca38155fe93c1ab377cda4", "parents": [ "6157332edabdf77ccae2a033b53bbc9ae1d70ede" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:34 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:34 2007 +0200" }, "message": "ide: replace ide_pci_device_t by struct ide_port_info\n\n* Rename struct ide_pci_device_s to struct ide_port_info.\n\n* Remove ide_pci_device_t typedef.\n\nWhile at it:\n\n* Fix __ide_pci_register_driver() comment.\n\n* Fix aec62xx_init_one() comment.\n\n* Remove unused \u0027cds\u0027 field from ide_hwgroup_t.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "283283070f2607ed759563613c044f96f1546834", "tree": "59fd3a65404f39cbbe4133c9c473e57dc529363d", "parents": [ "cad221aa82c6f434c1d78bee1d485b5b69c626f8" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:30 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:30 2007 +0200" }, "message": "alim15x3: use -\u003ehost_flags and -\u003eudma_mask fields from ide_pci_device_t\n\n* Make a local copy of ali15x3_chipset in alim15x3_init_one() and set\n -\u003ehost_flags / -\u003eudma_mask according to the controller capabilities.\n\n* Cleanup init_hwif_common_ali15x3().\n\n* Bump driver version.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cad221aa82c6f434c1d78bee1d485b5b69c626f8", "tree": "83c9d96966abe922fe9a1d5ff262b3f07e7617b8", "parents": [ "caea7602f309cbd55ba609800fd3c3e5d19ab684" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:30 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:30 2007 +0200" }, "message": "alim15x3: fix CD_ROM DMA and PIO FIFO settings setup\n\n* Setup CD_ROM DMA and PIO FIFO settings in init_chipset_ali15x3() instead\n of ata66_ali15x3(). The latter is called from init_hwif_common_ali15x3()\n only if DMA base exists (which insists m5529_revision \u003e 0x20).\n\n This changes makes CD_ROM DMA / PIO FIFO bits being set only once\n and also when \"idex\u003data66\" kernel parameter is used.\n\n* While at it move also chip_is_1543c_e setup from ata66_ali15x3() to\n init_chipset_ali15x3() and check if isa_dev exists before accessing it.\n\n* Bump driver version.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "85ad93ad56f4baf52e7c40f2e01c4df8e14d4c9c", "tree": "85aa2c6097bf0bff759e77fd9878e21868af804d", "parents": [ "d7c526f7db816af57b38e81169d18b27c3efe85c" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:12 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:12 2007 +0200" }, "message": "ide: set drive-\u003eautotune in ide_pci_setup_ports()\n\nMajority of host drivers using IDE PCI layer set drive-\u003eautotune, the only\nexceptions are:\n\ngeneric.c\nns87415.c\nrz1000.c\ntrm290.c\n* no -\u003eset_pio_mode method\n\nit821x.c:\n* if memory allocation fails drive-\u003eautotune won\u0027t be set\n (but there also won\u0027t be -\u003eset_pio_mode method in such case)\n\npiix.c:\n* MPIIX controller (no -\u003einit_hwif method so also no -\u003eset_pio_mode method)\n\nHowever if there is no -\u003eset_pio_mode method there are no changes in behavior\nw.r.t. PIO tuning so always set drive-\u003eautotune in ide_pci_setup_ports().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "93c680798531503ad1a4f1d6ad22e3785e8c4c75", "tree": "691f280a0ddb0f39ac6f4901ae4f4266835e9b28", "parents": [ "3985ee3b4c5f9e1d73623b92715375b089c54353" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:11 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:11 2007 +0200" }, "message": "alim15x3: always tune PIO\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5f8b6c34854a966fe5eb7241fde0419d47d5d408", "tree": "052afd508d9cd314f503d938182db55355f1b392", "parents": [ "9adf768a398745c539623210502b521e671c59d7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:07 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:07 2007 +0200" }, "message": "ide: add -\u003emwdma_mask and -\u003eswdma_mask to ide_pci_device_t (take 2)\n\n* Add -\u003emwdma_mask and -\u003eswdma_mask to ide_pci_device_t.\n\n* Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in\n setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and -\u003einit_hwif\n method may still override them).\n\n* Convert IDE PCI host drivers to use ide_pci_device_t DMA masks.\n\nWhile at it:\n\n* Use ATA_{UDMA,MWDMA,SWDMA}* defines.\n\n* hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345.\n\n* serverworks.c: fix DMA masks being set before checking DMA base.\n\nv2:\n* Add missing masks to DECLARE_GENERIC_PCI_DEV() macro.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "238e4f142c33bb34440cc64029dde7b9fbc4e65f", "tree": "5fc96f650cf6d326a4bc1e0026cd8ddeb9b9aa94", "parents": [ "9ffcf364f9d0aca3ea79e9987c368eb75925460e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:07 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:07 2007 +0200" }, "message": "ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags\n\nAdd IDE_HFLAG_NO_LBA48[_DMA] host flags, use it instead of hwif-\u003eno_lba48[_dma]\nand then remove no longer needed hwif-\u003eno_lba48[_dma]. As a side-effect\nthis change fixes hwif-\u003eno_lba48_dma not being restored by ide_hwif_restore().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "47b687882c02f802dd5bbe1227effe006820246e", "tree": "7b9048ebfa0a53203e4e3c55649f28e352a143cc", "parents": [ "7cab14a79973893392111b8f887856a54621f759" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "message": "ide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flags\n\nAdd IDE_HFLAG_NO_{DMA,AUTODMA} host flags. Convert all host drivers using\nide_pci_device_t to use these flags instead of d-\u003eautodma and then remove no\nlonger needed d-\u003eautodma.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7cab14a79973893392111b8f887856a54621f759", "tree": "925ad89a10daa3584e05806eadffb628ef97313b", "parents": [ "33c1002ed912ac9dacedd5d5b166da3b72d18460" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "message": "ide: add IDE_HFLAG_BOOTABLE host flag\n\nAdd IDE_HFLAG_BOOTABLE host flag and IDE_HFLAG_OFF_BOARD define. Convert\nall host drivers using ide_pci_device_t to use IDE_HFLAG_{BOOTABLE,OFF_BOARD}\ninstead of d-\u003ebootable and then remove no longer needed d-\u003ebootable.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "33c1002ed912ac9dacedd5d5b166da3b72d18460", "tree": "c129987c6935542a8bd95924873ac6bf0e1e756c", "parents": [ "1c3dd326ad790934fd88ec086e75a9d61ddaef8a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "message": "ide: add IDE_HFLAG_NO_ATAPI_DMA host flag\n\nAdd IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which\ndon\u0027t support ATAPI DMA. Then remove no longer needed hwif-\u003eatapi_dma.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9ff6f72f432364991d68e99cae72cb141c166e70", "tree": "e37e5dc6d1b2387f7cbc2909d5cb534d4a395a79", "parents": [ "1b5169405e50b98b2bd1e4f86c7706ea24a59193" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "message": "ide: remove hwif-\u003eautodma and drive-\u003eautodma\n\n* hpt34x.c: disable DMA masks for HPT345\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* Check noautodma global variable instead of drive-\u003eautodma in ide_tune_dma().\n\n This fixes handling of \"ide\u003dnodma\" kernel parameter for icside, ide-cris,\n au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers.\n\n* Remove hwif-\u003eautodma (it was not checked by IDE core code anyway) and\n drive-\u003eautodma (was set by all host drivers - except HPT345/TRM290 special\n cases - unless \"ide\u003dnodma\" was used).\n\nWhile at it:\n- remove needless printk() from icside.c\n- remove stale FIXME/comment from ide-probe.c\n- don\u0027t force DMA off if PCI bus-mastering had to be enabled in setup-pci.c\n (this setting was always later over-ridden by host drivers anyway)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9cbcc5e3c5d2d0355fed22d00762fd764c81a383", "tree": "1e8a0faed232ab34d8b2b423fbfafbbaab339f94", "parents": [ "d83fca58d3229f3b23a92a72c3428da8faf09940" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:56 2007 +0200" }, "message": "ide: use PCI_VDEVICE() macro\n\nWhile at it:\n- make struct pci_device_id tables const\n- use PCI_DEVICE_ID_ITE_8213 define in it8213.c\n- fix comment in generic.c\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0ae2e178652753ae1797d407755a3505f7c1d2a7", "tree": "fa725edcfb4b9752ebf2aa49a3e42e158537d4ed", "parents": [ "b8b739d3361c16773a30fe5c0360336bbc19f435" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "message": "ide: remove -\u003eide_dma_check (take 2)\n\n* Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend\n on BIOS for programming device/controller for DMA. Set it in cy82c693,\n generic, ns87415, opti621 and trm290 host drivers.\n\n* Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520\n host driver.\n\n* Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag.\n\n* Add generic ide_dma_check() helper and remove all open coded -\u003eide_dma_check\n implementations. Fix all places checking for presence of -\u003eide_dma_check\n hook to check for -\u003eide_dma_on instead.\n\n* Remove no longer needed code from config_drive_for_dma().\n\n* Make ide_tune_dma() static.\n\nv2:\n* Fix config_drive_for_dma() return values.\n\n* Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI\u003dn by adding\n dummy config_drive_for_dma() inline.\n\n* Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check().\n\n* Fix init_hwif_it8213() comment.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d3b90baf0924c13045c56c3d0a766f9374fe7a9e", "tree": "f0cc28da2304ea9912f882e99cb6c2723d1a9b43", "parents": [ "8446f65988b48d19cf419aa4def9a9ccfed17b76" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:54 2007 +0200" }, "message": "ide: remove drive-\u003einit_speed zeroing\n\nSeveral host drivers used to reset drive-\u003einit_speed in their -\u003eide_dma_check\nimplementations which resulted in incorrect init speed being reported to the\nuser, fix it.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "99149a485958ada512eafc34fe36a80cb63fa56c", "tree": "6e4fd863eb89a46c045f49c9e5495d8a70679ad0", "parents": [ "88ae4d8c3829fe3d7be9b1e3ed79a37814752d61" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:53 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:53 2007 +0200" }, "message": "alim15x3: remove redundant m5229_revision check\n\ninit_dma_ali15x3() guarantees that hwif-\u003edma_base will never be set for\nm5229_revision \u003c 0x20 so remove redundant m5229_revision \u003e\u003d 0x20 check from\ninit_hwif_common_ali15x3().\n\nWhile at it remove incorrect comment.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "88b2b32babd46cd54d2de4d17eb869aea3383e11", "tree": "d446864f7c3431f8c428eecacd11caf7b794f018", "parents": [ "6e249395eace037ef139a1c8996b31e3797e412a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "message": "ide: move ide_config_drive_speed() calls to upper layers (take 2)\n\n* Convert {ide_hwif_t,ide_pci_device_t}-\u003ehost_flag to be u16.\n\n* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program \n the host for the transfer mode after programming the device. Set it\n in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac\n and via82cxxx host drivers.\n\n* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely\n skip programming of host/device for the transfer mode (\"smart\" hosts).\n Set it in it821x host driver and check it in ide_tune_dma().\n\n* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all\n direct -\u003eset_pio_mode/-\u003espeedproc users to use these helpers.\n\n* Move ide_config_drive_speed() calls from -\u003eset_pio_mode/-\u003espeedproc\n methods to callers.\n\n* Rename -\u003espeedproc method to -\u003eset_dma_mode, make it void and update\n all implementations accordingly.\n\n* Update ide_set_xfer_rate() comments.\n\n* Unexport ide_config_drive_speed().\n\nv2:\n* Fix issues noticed by Sergei:\n - export ide_set_dma_mode() instead of moving -\u003eset_pio_mode abuse wrt\n to setting DMA modes from sc1200_set_pio_mode() to do_special()\n - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()\n - check for (hwif-\u003eset_pio_mode) \u003d\u003d NULL in ide_set_pio_mode()\n - check for (hwif-\u003eset_dma_mode) \u003d\u003d NULL in ide_set_dma_mode()\n - return -1 from ide_set_{pio,dma}_mode() if -\u003eset_{pio,dma}_mode \u003d\u003d NULL\n - don\u0027t set -\u003eset_{pio,dma}_mode on it821x in \"smart\" mode\n - fix build problem in pmac.c\n - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c\n - improve patch description\n\nChanges in behavior caused by this patch:\n- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change\n PIO mode if it821x controller is in \"smart\" mode\n- removal of two debugging printk-s (from cs5530.c and sc1200.c)\n- transfer modes 0x00-0x07 passed from user space may be programmed twice on\n the device (not really an issue since 0x00 is not supported correctly by\n any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "19f71153b9be219756c6b2757921433a69b7975c", "tree": "cc2c5c290a88d61df16848f733aed8708e82c119", "parents": [ "e6005a85acb9609326512ecc784859831cfb24a3", "8f4dd2e42637fd61a6366d2cace69091926eaa15" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:20:44 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:20:44 2007 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits)\n ide: use only -\u003eset_pio_mode method for programming PIO modes (take 2)\n sis5513: don\u0027t change UDMA settings when programming PIO\n it8213/piix/slc90e66: don\u0027t change DMA settings when programming PIO\n alim15x3: PIO mode setup fixes\n siimage: fix -\u003eset_pio_mode method to select PIO data transfer\n cs5520: don\u0027t enable VDMA in -\u003espeedproc\n sc1200: remove redundant warning message from sc1200_tune_chipset()\n ide-pmac: PIO mode setup fixes (take 3)\n icside: fix -\u003espeedproc to return on unsupported modes (take 5)\n sgiioc4: use ide_tune_dma()\n amd74xx/via82cxxx: use ide_tune_dma()\n ide: add ide_set{_max}_pio() (take 4)\n ide: Kconfig face-lift\n ide: move ide_rate_filter() calls to the upper layer (take 2)\n sis5513: add -\u003eudma_filter method for chipset_family \u003e\u003d ATA_133\n ide: mode limiting fixes for user requested speed changes\n ide: add missing ide_rate_filter() calls to -\u003espeedproc()-s\n ide: call udma_filter() before resorting to the UltraDMA mask\n ide: make jmicron match vendor and device class\n pdc202xx_new: switch to using pci_get_slot() (take 2)\n ...\n" }, { "commit": "8f4dd2e42637fd61a6366d2cace69091926eaa15", "tree": "38dc8e475afc27c575ff7f3701e57d5c9e3a9be9", "parents": [ "0d3be723cb6432e384267d0fe83ee0bae5e17846" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:02 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:02 2007 +0200" }, "message": "ide: use only -\u003eset_pio_mode method for programming PIO modes (take 2)\n\nUse -\u003eset_pio_mode method to program PIO modes in ide_set_xfer_rate()\n(the only place which used -\u003espeedproc to program PIO modes) and remove\nhandling of PIO modes from all -\u003espeedproc implementations.\n\nv2:\n* Fix pmac_ide_tune_chipset() comment.\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a6fe837ed63aa812bea029a24b7aafc72ba8de88", "tree": "7f13ed5e930ec8a782c7c412ce4d0cab82e21872", "parents": [ "ffe5415c3d6138aff412af7e455b3df4d53c0aa0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:01 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:01 2007 +0200" }, "message": "alim15x3: PIO mode setup fixes\n\n* Return failure in -\u003espeedproc method for unsupported/invalid transfer\n modes passed from user-space (fixes theoretical OOPS in ali_tune_pio()\n and/or setting random PIO timings on host controller + disabling UDMA\n bit + setting unsupported/invalid transfer mode on the device).\n\n* Don\u0027t disable UDMA bit when programming PIO modes.\n\n* Add FIXME about DMA timings never being set.\n\n* Bump driver version.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "26bcb879c03254545a19c6700fe5bcef6f21e7b1", "tree": "dc35f1a7d7860fe0de268ff92189ff0884b689d3", "parents": [ "842c19ad6fc0dbd9ac9d2f8527466201802934cf" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "message": "ide: add ide_set{_max}_pio() (take 4)\n\n* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags\n and set them in ht6560, cmd640, cmd64x and sc1200 host drivers.\n\n* Add set_pio_mode_abuse() for checking if host driver has a non-standard\n -\u003etuneproc() implementation and use it in do_special().\n\n* Add ide_set_pio() for setting PIO mode (it uses hwif-\u003epio_mask to find\n the maximum PIO mode supported by the host), also add ide_set_max_pio()\n wrapper for ide_set_pio() to use for auto-tuning. Convert users of\n -\u003etuneproc to use ide_set{_max}_pio() where possible. This leaves only\n do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as\n a direct users of -\u003etuneproc.\n\n* Remove no longer needed ide_get_best_pio_mode() calls and printk-s\n reporting PIO mode selected from -\u003etuneproc implementations.\n\n* Rename -\u003etuneproc hook to -\u003eset_pio_mode and make \u0027pio\u0027 argument const.\n\n* Remove stale comment from ide_config_drive_speed().\n\nv2:\n* Fix \"ata_\" prefix (Noticed by Jeff).\n\nv3:\n* Minor cleanups/fixups per Sergei\u0027s suggestions.\n\nv4:\n* Fix compile problem in drivers/ide/pci/cmd640.c\n (Noticed by Andrew Morton).\n\n* Improve some -\u003eset_pio_mode comments.\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f212ff28f08e4ddcef9f25b13463c45cc4204a0c", "tree": "e8fe63044c2ebec404689cbd55d75497aa77da0a", "parents": [ "3160d5416f39da9d9221fec7cb9d64399b706bbc" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "message": "ide: move ide_rate_filter() calls to the upper layer (take 2)\n\n* Move ide_rate_filter() calls from host drivers to IDE core.\n\n* Make ide_rate_filter() static.\n\n* Make \u0027speed\u0027 argument of -\u003espeedproc const.\n\nv2:\n* Fix it8213_tune_chipset() comment.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1855256c497ecfefc730df6032243f26855ce52c", "tree": "b73947f1a5e1b798e1dec068ac1cda25ae910bf6", "parents": [ "bbf25010f1a6b761914430f5fca081ec8c7accd1" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Oct 03 15:15:40 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Tue Oct 09 20:22:20 2007 -0400" }, "message": "drivers/firmware: const-ify DMI API and internals\n\nThree main sets of changes:\n\n1) dmi_get_system_info() return value should have been marked const,\n since callers should not be changing that data.\n\n2) const-ify DMI internals, since DMI firmware tables should,\n whenever possible, be marked const to ensure we never ever write to\n that data area.\n\n3) const-ify DMI API, to enable marking tables const where possible\n in low-level drivers.\n\nAnd if we\u0027re really lucky, this might enable some additional\noptimizations on the part of the compiler.\n\nThe bulk of the changes are #2 and #3, which are interrelated. #1 could\nhave been a separate patch, but it was so small compared to the others,\nit was easier to roll it into this changeset.\n\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "03e6f489b32c0e7877bfe48f5619db725edf1fea", "tree": "89d80fa4392b8d0010c8688ab1a00f5b00f8bc56", "parents": [ "2808b0a96a05ac8e826b5380eb2d30a10586707a" ], "author": { "name": "Daniel Exner", "email": "dex@dragonslave.de", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "message": "pata_ali/alim15x3: override 80-wire cable detection for Toshiba S1800-814\n\nAdd Toshiba S1800-814 to whitelist for both pata_ali and alim15x3,\nas it is correctly detected as 40-wire connected but this cable is\nshort enough to still use transfer modes higher than UDMA33.\n\nSigned-off-by: Daniel Exner \u003cdex@dragonslave.de\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8663fd6d0de7144c9e8455b733aeb38fe80788ed", "tree": "23068a6480c838c2993cc24d6b2c9c67c9a88d80", "parents": [ "32a70a817acbb96fcfcc7543932222467c771207" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:43 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:43 2007 +0200" }, "message": "alim15x3: Correct HP detect\n\nDirect port of Alan\u0027s fix for pata_ali.\n\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4099d14322149c7a467e4997b87be4ba8eb78697", "tree": "133a913d7f9c2dacaaaef5cfdf2ae6911dc21f4c", "parents": [ "6a824c92db4d606c324272c4eed366fb71672440" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: add PIO masks\n\n* Add ATA_PIO[0-6] defines to \u003clinux/ata.h\u003e.\n\n* Add -\u003epio_mask field to ide_pci_device_t and ide_hwif_t.\n\n* Add PIO masks to host drivers.\n\n\u003clinux/ata.h\u003e change ACK-ed by Jeff Garzik \u003cjeff@garzik.org\u003e.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2134758d2a5429325cee4d4ce8959af5314eeba1", "tree": "cc0d1326c04522e70c1f52598c9aba29aa85170f", "parents": [ "e5fa4b2968ff0f32b5ecfa082fd6db50b731055e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "message": "ide: drop \"PIO data\" argument from ide_get_best_pio_mode()\n\n* Drop no longer needed \"PIO data\" argument from ide_get_best_pio_mode()\n and convert all users accordingly.\n\n* Remove no longer needed ide_pio_data_t.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a5d8c5c834d3cabf4b7b477c3f6ee923c25026fc", "tree": "19fc04470569a3c2f227d5aac3078a15ac65bb32", "parents": [ "2229833c1365346b64357a9263fa724f74f5e376" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "message": "ide: add ide_pci_device_t.host_flags (take 2)\n\n* Rename ide_pci_device_t.flags to ide_pci_device_t.host_flags\n and IDEPCI_FLAG_ISA_PORTS flag to IDE_HFLAG_ISA_PORTS.\n\n* Add IDE_HFLAG_SINGLE flag for single channel devices.\n\n* Convert core code and all IDE PCI drivers to use IDE_HFLAG_SINGLE\n and remove no longer needed ide_pci_device_t.channels field.\n\nv2:\n* Fix issues noticed by Sergei:\n - correct code alignment in scc_pata.c\n - s/IDE_HFLAG_SINGLE/~IDE_HFLAG_SINGLE/ in serverworks.c\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "44c10138fd4bbc4b6d6bff0873c24902f2a9da65", "tree": "6e16d3ec80c87490dc743f72da086356f2906ace", "parents": [ "b8a3a5214d7cc115f1ca3a3967b7229d97c46f4a" ], "author": { "name": "Auke Kok", "email": "auke-jan.h.kok@intel.com", "time": "Fri Jun 08 15:46:36 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jul 11 16:02:10 2007 -0700" }, "message": "PCI: Change all drivers to use pci_device-\u003erevision\n\nInstead of all drivers reading pci config space to get the revision\nID, they can now use the pci_device-\u003erevision member.\n\nThis exposes some issues where drivers where reading a word or a dword\nfor the revision number, and adding useless error-handling around the\nread. Some drivers even just read it for no purpose of all.\n\nIn devices where the revision ID is being copied over and used in what\nappears to be the equivalent of hotpath, I have left the copy code\nand the cached copy as not to influence the driver\u0027s performance.\n\nCompile tested with make all{yes,mod}config on x86_64 and i386.\n\nSigned-off-by: Auke Kok \u003cauke-jan.h.kok@intel.com\u003e\nAcked-by: Dave Jones \u003cdavej@redhat.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "95ba8c17bc57bf4666e9de2be715b69d9a1ba211", "tree": "69a55e2ea0453369f5c743d59408513cfd627aa3", "parents": [ "7207626f47a3d66ce361bad197eefca4b8a6fa17" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "alim15x3: backport short cables support from pata_ali.c\n\nBackport short cables support from pata_ali.c and while at it cleanup\nexisting cable detection code.\n\nThis patch should allow UDMA \u003e 2 modes on HP Pavilion N5430 and Fujitsu P2000.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb", "tree": "f61c34da6092f2f1a97a78da567afc59ad40850b", "parents": [ "75b1d97535327d0428c6bffd9d5407e65546fd5d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "ide: add short cables support\n\nThis patch allows users to override both host and device side cable detection\nwith \"ideX\u003data66\" kernel parameter. Thanks to this it should be now possible\nto use UDMA \u003e 2 modes on systems (laptops mainly) which use short 40-pin cable\ninstead of 80-pin one.\n\nNext patches add automatic detection of some systems using short cables.\n\nChanges:\n\n* Rename hwif-\u003eudma_four to hwif-\u003ecbl and make it u8.\n\n* Convert all existing users accordingly (use ATA_CBL_* defines while at it). \n\n* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().\n\n* Use ATA_CBL_PATA40_SHORT for \"ideX\u003data66\" kernel parameter.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "38ff8a74e8f015f94289b84cd6572a68c3431cdd", "tree": "e3ecc51f4717f3c763c8d4888b9647033fd55556", "parents": [ "6b8cf7724bd0f8ae1f61937c5f40f4dbbda40960" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:43 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:43 2007 +0200" }, "message": "alim15x3: use ide_tune_dma()\n\nUse ide_tune_dma() in ali15x3_config_drive_for_dma() and remove all the open\ncoded DMA tuning code and also config_chipset_for_dma(). Set -\u003eatapi_dma flag\ncorrectly in init_hwif_common_ali15x3() so ide_tune_dma() can take care of\nchecking if ATAPI DMA is allowed and remove open coded ATAPI DMA check from\nali15x3_config_drive_for_dma().\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "ecfd80e4a514123070b4cfb674b817ba75055df2", "tree": "956baa39e22030d139803b7585bd71e91c637bb5", "parents": [ "29e744d088e3555f4efbdf390f01088dd66993b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "message": "ide: make /proc/ide/ optional\n\nAll important information/features should be already available through\nsysfs and ioctl interfaces.\n\nAdd CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option,\ndisabling it makes IDE driver ~5 kB smaller (on x86-32).\n\nWhile at it add CONFIG_PROC_FS\u003dn versions of proc_ide_{create,destroy}()\nand remove no longer needed #ifdefs.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2d5eaa6dd744a641e75503232a01f52d0768884c", "tree": "0736bd00ea3bd032d601d0a676c998cb043b877a", "parents": [ "18137207236285989dfc0ee7f929b954199228f3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "message": "ide: rework the code for selecting the best DMA transfer mode (v3)\n\nDepends on the \"ide: fix UDMA/MWDMA/SWDMA masks\" patch.\n\n* add ide_hwif_t.udma_filter hook for filtering UDMA mask\n (use it in alim15x3, hpt366, siimage and serverworks drivers)\n* add ide_max_dma_mode() for finding best DMA mode for the device\n (loosely based on some older libata-core.c code)\n* convert ide_dma_speed() users to use ide_max_dma_mode()\n* make ide_rate_filter() take \"ide_drive_t *drive\" as an argument instead\n of \"u8 mode\" and teach it to how to use UDMA mask to do filtering\n* use ide_rate_filter() in hpt366 driver\n* remove no longer needed ide_dma_speed() and *_ratemask()\n* unexport eighty_ninty_three()\n\nv2:\n* rename -\u003efilter_udma_mask to -\u003eudma_filter\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space\n originated transfer mode change requests when 100MHz clock is used)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "18137207236285989dfc0ee7f929b954199228f3", "tree": "d55f1287ae64318190e18cb7a64ca514c76c3414", "parents": [ "de372ecd80a42c4fb485c7232475301a18d05184" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:07 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:07 2007 +0200" }, "message": "ide: fix UDMA/MWDMA/SWDMA masks (v3)\n\n* use 0x00 instead of 0x80 to disable -\u003e{ultra,mwdma,swdma}_mask\n* add udma_mask field to ide_pci_device_t and use it to initialize\n -\u003eultra_mask in aec62xx, cmd64x, pdc202xx_{new,old} and piix drivers\n* fix UDMA masks to match with chipset specific *_ratemask()\n (alim15x3, hpt366, serverworks and siimage drivers need UDMA mask\n filtering method - done in the next patch)\n\nv2:\n* piix: fix cable detection for 82801AA_1 and 82372FB_1\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n* cmd64x: use hwif-\u003ecds-\u003eudma_mask\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n* aec62xx: fix newly introduced bug - check DMA status not command register\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* piix: use hwif-\u003ecds-\u003eudma_mask\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "072cdcbb7af8a0e1894f9caa6d46d027bbe7f647", "tree": "94b9f73bf58d7e9f454133731ae2b3f5cd03ab7b", "parents": [ "826a1b6502d0d1d67fc41043fc831e90f2ef5835" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat May 05 22:03:50 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat May 05 22:03:50 2007 +0200" }, "message": "alim15x3: PIO fallback fix\n\nIf DMA tuning fails always set the best PIO mode.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "21b824771309927172247546b0bff0c4e6831875", "tree": "07109332a87287aeeba78dce358ea4472bdf227c", "parents": [ "bb648a0d22908116b4ef168935a160d7f17c4e6d" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Sat Mar 03 17:48:52 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:52 2007 +0100" }, "message": "alim15x3: fix PIO mode setup\n\nThe driver\u0027s tuneproc() method fails to set the drive\u0027s own speed -- fix this\nby renaming the function to ali15x3_tune_pio() and \"wrapping\" the new tuneproc()\nmethod around it and making it return the mode set, update the heading comment.\n\nAlso, setting PIO mode via the speedproc() method does not work due to passing \nto the tuneproc() method\u0027s a mode number not biased by XFER_PIO_0 -- fix this\nalong with a typo in the heading comment...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3608b5d71a52c053787dbad6af20c25f7e0b75a9", "tree": "5bd6ac777d32d8426e65e3c31cc1587674771e8c", "parents": [ "9ef5791e1be91007951477b8ed1530ac1166a8e7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: add ide_set_dma() helper (v2)\n\n* add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return\n -1 when DMA needs to be disabled (\u003d\u003d need to call -\u003eide_dma_off_quietly)\n 0 when DMA needs to be enabled (\u003d\u003d need to call -\u003eide_dma_on)\n 1 when DMA setting shouldn\u0027t be changed\n* fix IDE code to use ide_set_dma() instead if using -\u003eide_dma_check directly\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "0ecdca26e556eae9668ce6de9554757dddb942ef", "tree": "21d62c01d0c0d5aeea2524252ed8dec6ca20b6d4", "parents": [ "7569e8dc2213ecc47024ea5edbadc8736487d926" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: use PIO/MMIO operations directly where possible (v2)\n\nThis results in smaller/faster/simpler code and allows future optimizations.\nAlso remove no longer needed ide[_mm]_{inl,outl}() and ide_hwif_t.{INL,OUTL}.\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" } ], "next": "82ab1eeceba6705cd5a8815c48eb03af1dada744" }