)]}' { "log": [ { "commit": "f444de05d20e27cdd960c13fcbcfca3099f03143", "tree": "a7fbef60420d88dda5840e06094be21ee3eb1dc0", "parents": [ "ac8dd506e40ee2c7fcc61654a44c32555a0a8d6c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed May 05 15:25:02 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 07 14:55:50 2010 -0400" }, "message": "cfg80211/mac80211: better channel handling\n\nCurrently (all tested with hwsim) you can do stupid\nthings like setting up an AP on a certain channel,\nthen adding another virtual interface and making\nthat associate on another channel -- this will make\nthe beaconing to move channel but obviously without\nthe necessary IEs data update.\n\nIn order to improve this situation, first make the\nconfiguration APIs (cfg80211 and nl80211) aware of\nmulti-channel operation -- we\u0027ll eventually need\nthat in the future anyway. There\u0027s one userland API\nchange and one API addition. The API change is that\nnow SET_WIPHY must be called with virtual interface\nindex rather than only wiphy index in order to take\neffect for that interface -- luckily all current\nusers (hostapd) do that. For monitor interfaces, the\nold setting is preserved, but monitors are always\nslaved to other devices anyway so no guarantees.\n\nThe second userland API change is the introduction\nof a per virtual interface SET_CHANNEL command, that\nhostapd should use going forward to make it easier\nto understand what\u0027s going on (it can automatically\ndetect a kernel with this command).\n\nOther than mac80211, no existing cfg80211 drivers\nare affected by this change because they only allow\na single virtual interface.\n\nmac80211, however, now needs to be aware that the\nchannel settings are per interface now, and needs\nto disallow (for now) real multi-channel operation,\nwhich is another important part of this patch.\n\nOne of the immediate benefits is that you can now\nstart hostapd to operate on a hardware that already\nhas a connection on another virtual interface, as\nlong as you specify the same channel.\n\nNote that two things are left unhandled (this is an\nimprovement -- not a complete fix):\n\n * different HT/no-HT modes\n\n currently you could start an HT AP and then\n connect to a non-HT network on the same channel\n which would configure the hardware for no HT;\n that can be fixed fairly easily\n\n * CSA\n\n An AP we\u0027re connected to on a virtual interface\n might indicate switching channels, and in that\n case we would follow it, regardless of how many\n other interfaces are operating; this requires\n more effort to fix but is pretty rare after all\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9043f3b89abebfbfe4b8d64c7b71b9ac0b9eaa0b", "tree": "c7d0419f0f8c44ca92e33b7acd21295e1befa74f", "parents": [ "195e294d21e88af879da4f88db2ceeb4ec28a755" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Tue Apr 27 12:47:41 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 27 16:09:22 2010 -0400" }, "message": "cfg80211: Remove default dynamic PS timeout value\n\nNow that the mac80211 is choosing dynamic ps timeouts based on the ps-qos\nnetwork latency configuration, configure a default value of -1 as the dynamic\nps timeout in cfg80211. This value allows the mac80211 to determine the value\nto be used.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fd8aaaf3519f3fd3c82594e90bc6808072b94d54", "tree": "70ebab87226b597270c1d33b57955afac3e2f4fe", "parents": [ "740c2679396d60763968ffd16362f1f5c8242172" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Apr 27 01:23:35 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 27 16:09:21 2010 -0400" }, "message": "cfg80211: add ap isolation support\n\nThis is used to configure APs to not bridge traffic between connected stations.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "672724403b42da1d276c6cf811e8e34d15efd964", "tree": "3664f85476b667625aa37f3493e6bc0791f11ef9", "parents": [ "81b208a6b6e2923dcc2dd5292f0d2ffe20b5d16f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Apr 21 10:25:36 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 21 14:15:19 2010 -0400" }, "message": "radiotap parser: fix endian annotation\n\nWhen I updated this from the corresponding\nuserspace library, an annotation error crept\nin -- this variable needs to be annotated as\nlittle endian. No effect on code generation.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d5cdfacb35ed886271d1ccfffbded98d3447da17", "tree": "8233a713949c4c8da8c98e75868efc74d5613c3d", "parents": [ "7590a550b88b8c3cb025f0a8ed58e279ad62e4c1" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Sun Apr 04 09:37:19 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 07 14:37:56 2010 -0400" }, "message": "cfg80211: Add local-state-change-only auth/deauth/disassoc\n\ncfg80211 is quite strict on allowing authentication and association\ncommands only in certain states. In order to meet these requirements,\nuser space applications may need to clear authentication or\nassociation state in some cases. Currently, this can be done with\ndeauth/disassoc command, but that ends up sending out Deauthentication\nor Disassociation frame unnecessarily. Add a new nl80211 attribute to\nallow this sending of the frame be skipped, but with all other\ndeauth/disassoc operations being completed.\n\nSimilar state change is also needed for IEEE 802.11r FT protocol in\nthe FT-over-DS case which does not use Authentication frame exchange\nin a transition to another BSS. For this to work with cfg80211, an\nauthentication entry needs to be created for the target BSS without\nsending out an Authentication frame. The nl80211 authentication\ncommand can be used for this purpose, too, with the new attribute to\nindicate that the command is only for changing local state. This\nenables wpa_supplicant to complete FT-over-DS transition successfully.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d6dc1a386358979e12366d1f35eeb68fc181e101", "tree": "4b65ba21328d6984d008b62795dd60d99c350632", "parents": [ "921ca03c8f8e982f27fc406bc301caf2196b99f7" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Tue Mar 23 09:02:33 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 24 16:02:37 2010 -0400" }, "message": "cfg80211: Add connection quality monitoring support to nl80211\n\nAdd support for basic configuration of a connection quality monitoring to the\nnl80211 interface, and basic support for notifying about triggered monitoring\nevents.\n\nVia this interface a user-space connection manager may configure and receive\npre-warning events of deteriorating WLAN connection quality, and start\npreparing for roaming in advance, before the connection is already lost.\n\nAn example usage of such a trigger is starting scanning for nearby AP\u0027s in\nan attempt to find one with better connection quality, and associate to it\nbefore the connection characteristics of the existing connection become too bad\nor the association is even lost, leading in a prolonged delay in connectivity.\n\nThe interface currently supports only RSSI, but it could be later extended\nto include other parameters, such as signal-to-noise ratio, if need for that\narises.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ffb9eb3d8b450c22bbbc688c6b630141ac476fd9", "tree": "0e9677ea9df5b86fedf814236bf049a0f0435f6a", "parents": [ "088ea189c4c75cdf211146faa4b341a0f7476be6" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Wed Feb 17 17:58:10 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 19 15:52:40 2010 -0500" }, "message": "nl80211: add power save commands\n\nThe most needed command from nl80211, which Wireless Extensions had,\nis support for power save mode. Add a simple command to make it possible\nto enable and disable power save via nl80211.\n\nI was also planning about extending the interface, for example adding the\ntimeout value, but after thinking more about this I decided not to do it.\nBasically there were three reasons:\n\nFirstly, the parameters for power save are very much hardware dependent.\nTrying to find a unified interface which would work with all hardware, and\nstill make sense to users, will be very difficult.\n\nSecondly, IEEE 802.11 power save implementation in Linux is still in state\nof flux. We have a long way to still to go and there is no way to predict\nwhat kind of implementation we will have after few years. And because we\nneed to support nl80211 interface a long time, practically forever, adding\nnow parameters to nl80211 might create maintenance problems later on.\n\nThird issue are the users. Power save parameters are mostly used for\ndebugging, so debugfs is better, more flexible, interface for this.\nFor example, wpa_supplicant currently doesn\u0027t configure anything related\nto power save mode. It\u0027s better to strive that kernel can automatically\noptimise the power save parameters, like with help of pm qos network\nand other traffic parameters.\n\nLater on, when we have better understanding of power save, we can extend\nthis command with more features, if there\u0027s a need for that.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "026331c4d9b526561ea96f95fac4bfc52b69e316", "tree": "a82b0a92a7f03a1d151a9db123320689c73d98c7", "parents": [ "8404080568613d93ad7cf0a16dfb68459b42a264" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Mon Feb 15 12:53:10 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 15 16:14:15 2010 -0500" }, "message": "cfg80211/mac80211: allow registering for and sending action frames\n\nThis implements a new command to register for action frames\nthat userspace wants to handle instead of the in-kernel\nrejection. It is then responsible for rejecting ones that\nit decided not to handle. There is no unregistration, but\nthe socket can be closed for that.\n\nFrames that are not registered for will not be forwarded\nto userspace and will be rejected by the kernel, the\ncfg80211 API helps implementing that.\n\nAdditionally, this patch adds a new command that allows\ndoing action frame transmission from userspace. It can be\nused either to exchange action frames on the current\noperational channel (e.g., with the AP with which we are\ncurrently associated) or to exchange off-channel Public\nAction frames with the remain-on-channel command.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "33e5a2f776e331dc8a4379b6efb660d38f182d96", "tree": "8d89bc3f70063bec4d85d76dc5887cea19da064d", "parents": [ "690680360cd22b55235481ca3421a3450a96138a" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Feb 03 10:24:30 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 08 16:50:53 2010 -0500" }, "message": "wireless: update radiotap parser\n\nUpstream radiotap has adopted the namespace\nproposal David Young made and I then took care\nof, for which I had adapted the radiotap parser\nas a library outside the kernel. This brings\nthe in-kernel parser up to speed.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c21dbf9214bce129f92e1af05552553ff0e318ed", "tree": "23f57010f34fc26ecf1d349a118f977afea418e4", "parents": [ "18c949070b57d2cbcc0b25c5cfa003ece204e468" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jan 26 14:15:46 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 26 11:53:20 2010 -0500" }, "message": "cfg80211: export cfg80211_find_ie\n\nThis new function (previously a static function\ncalled just \"find_ie\" can be used to find a\nspecific IE in a buffer of IEs.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ef15aac6073b27fd4f70007784d2d52ed394bf43", "tree": "80eeb99e74263e255d4e8af582550a6363ad7884", "parents": [ "b3fbdcf49f940d0703c356441e0daf045e64e076" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jan 20 12:02:33 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 22 16:11:16 2010 -0500" }, "message": "cfg80211: export multiple MAC addresses in sysfs\n\nIf a device has multiple MAC addresses, userspace will\nneed to know about that. Similarly, if it allows the\nMAC addresses to vary by a bitmask.\n\nIf a driver exports multiple addresses, it is assumed\nthat it will be able to deal with that many different\naddresses, which need not necessarily match the ones\nprogrammed into the device; if a mask is set then the\ndevice should deal addresses within that mask based\non an arbitrary \"base address\".\n\nTo test it all and show how it is used, add support\nto hwsim even though it can\u0027t actually deal with\naddresses different from the default.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "34a6eddbabd704b3c7dae9362234552267573be2", "tree": "661184452aa597e4f1034561b3ec9b267ad2e196", "parents": [ "80a112ffe8dbada25f3780ecc4beebf23451d755" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Wed Jan 06 16:19:24 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:51:28 2010 -0500" }, "message": "cfg80211: Store IEs from both Beacon and Probe Response frames\n\nStore information elements from Beacon and Probe Response frames in\nseparate buffers to allow both sets to be made available through\nnl80211. This allows user space applications to get access to IEs from\nBeacon frames even if we have received Probe Response frames from the\nBSS. Previously, the IEs from Probe Response frames would have\noverridden the IEs from Beacon frames.\n\nThis feature is of somewhat limited use since most protocols include\nthe same (or extended) information in Probe Response frames. However,\nthere are couple of exceptions where the IEs from Beacon frames could\nbe of some use: TIM IE is only included in Beacon frames (and it would\nbe needed to figure out the DTIM period used in the BSS) and at least\nsome implementations of Wireless Provisioning Services seem to include\nthe full IE only in Beacon frames).\n\nThe new BSS attribute for scan results is added to allow both the IE\nsets to be delivered. This is done in a way that maintains the\npreviously used behavior for applications that are not aware of the\nnew NL80211_BSS_BEACON_IES attribute.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "13ae75b103e07304a34ab40c9136e9f53e06475c", "tree": "61cfd1471cdefe8cf1a3da12b4b99aafc2770f76", "parents": [ "37eb0b164cf9fa9f70c8500926f5cde7c652f48e" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Tue Dec 29 12:59:45 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:51:23 2010 -0500" }, "message": "nl80211: New command for setting TX rate mask for rate control\n\nAdd a new NL80211_CMD_SET_TX_BITRATE_MASK command and related\nattributes to provide support for setting TX rate mask for rate\ncontrol. This uses the existing cfg80211 set_bitrate_mask operation\nthat was previously used only with WEXT compat code (SIOCSIWRATE). The\nnl80211 command allows more generic configuration of allowed rates as\na mask instead of fixed/max rate.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "37eb0b164cf9fa9f70c8500926f5cde7c652f48e", "tree": "9260e7045f32268c8c4ded718677711d371cd5ed", "parents": [ "e00cfce0cb2a397859607bf515c6de9ce064b64a" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed Jan 06 13:09:08 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:50:11 2010 -0500" }, "message": "cfg80211/mac80211: Use more generic bitrate mask for rate control\n\nExtend struct cfg80211_bitrate_mask to actually use a bitfield mask\ninstead of just a single fixed or maximum rate index. This change\nitself does not modify the behavior (except for debugfs files), but it\nprepares cfg80211 and mac80211 for a new nl80211 command for setting\nwhich rates can be used in TX rate control.\n\nSince frames are now going through the rate control algorithm\nunconditionally, the internal IEEE80211_TX_INTFL_RCALGO flag can now\nbe removed. The RC implementations can use the rate_idx_mask value to\noptimize their behavior if only a single rate is enabled.\n\nThe old max_rate_idx in struct ieee80211_tx_rate_control is maintained\n(but commented as deprecated) for backwards compatibility with existing\nRC implementations. Once these implementations have been updated to\nuse the more generic rate_idx_mask, the max_rate_idx value can be\nremoved.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "81077e82c3f591578625805dd6464a27a9ff56ec", "tree": "cb1e502c54b4e2f052f129b80a47190de7e22b62", "parents": [ "14acdde6e527950f66c084dbf19bad6fbfcaeedc" ], "author": { "name": "Lukáš Turek", "email": "8an@praha12.net", "time": "Mon Dec 21 22:50:47 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:49:17 2010 -0500" }, "message": "nl80211: Add new WIPHY attribute COVERAGE_CLASS\n\nThe new attribute NL80211_ATTR_WIPHY_COVERAGE_CLASS sets IEEE 802.11\nCoverage Class, which depends on maximum distance of nodes in a\nwireless network. It\u0027s required for long distance links (more than a few\nhundred meters).\n\nThe attribute is now ignored by two non-mac80211 drivers, rndis and\niwmc3200wifi, together with WIPHY_PARAM_RETRY_SHORT and\nWIPHY_PARAM_RETRY_LONG. If it turns out to be a problem, we could split\nset_wiphy_params callback or add new capability bits.\n\nSigned-off-by: Lukas Turek \u003c8an@praha12.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "98b6218388e345064c3f2d3c161383a18274c638", "tree": "3df881c8e15947aeefe31da7fa83980a1530aed3", "parents": [ "e4da8c37af626001ff704fb29ea14eb58f5f7208" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 23 13:15:44 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:55:06 2009 -0500" }, "message": "mac80211/cfg80211: add station events\n\nWhen, for instance, a new IBSS peer is found, userspace\nwants to be notified. Add events for all new stations\nthat mac80211 learns about.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9588bbd5529461a3dacd435bf239c84c3508f569", "tree": "dd00011714bdefdef1f818ac7caf53682253a515", "parents": [ "b203ffc3a447eb8d9e6120b783ddee081b143061" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed Dec 23 13:15:41 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:55:02 2009 -0500" }, "message": "cfg80211: add remain-on-channel command\n\nAdd new commands for requesting the driver to remain awake\non a specified channel for the specified amount of time\n(and another command to cancel such an operation). This\ncan be used to implement userspace-controlled off-channel\noperations, like Public Action frame exchange on another\nchannel than the operation channel.\n\nThe off-channel operation should behave similarly to scan,\ni.e. the local station (if associated) moves into power\nsave mode to request the AP to buffer frames for it and\nthen moves to the other channel to allow the off-channel\noperation to be completed. The duration parameter can be\nused to request enough time to receive a response from\nthe target station.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eaf85ca7fecb218fc41ff57c1642ca73b097aabb", "tree": "ad7965715f0cd67fe8946980ae2d1e9f3ea231a1", "parents": [ "ca99861d5421c91f5a8fd3a77acb4b7be14f119d" ], "author": { "name": "Zhu Yi", "email": "yi.zhu@intel.com", "time": "Tue Dec 01 10:18:37 2009 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 22 13:31:15 2009 -0500" }, "message": "wireless: add ieee80211_amsdu_to_8023s\n\nMove the A-MSDU handling code from mac80211 to cfg80211 so that more\ndrivers can use it. The new created function ieee80211_amsdu_to_8023s\nconverts an A-MSDU frame to a list of 802.3 frames.\n\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "67fbb16be69d138a3b6645ec5395b487cb915c58", "tree": "8dde9e1c42db515a5703e3bc142279cf2280c9ae", "parents": [ "a830df0714117574fd0d5fe98477059b3e9fd5bf" ], "author": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Tue Nov 24 23:59:15 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Sat Nov 28 15:05:05 2009 -0500" }, "message": "nl80211: PMKSA caching support\n\nThis is an interface to set, delete and flush PMKIDs through nl80211.\nMain users would be fullmac devices which firmwares are capable of\ngenerating the RSN IEs for the re-association requests, e.g. iwmc3200wifi.\n\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a58ce43f2fb17b728395ff530f019ca53c80145f", "tree": "1de5d2680d42de12902ccb85e99bc86f63eebf58", "parents": [ "7351c6bd482712e5e3ec9dffc547de0e0863efb0" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Nov 19 12:45:42 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 19 11:09:02 2009 -0500" }, "message": "mac80211: avoid spurious deauth frames/messages\n\nWith WEXT, it happens frequently that the SME\nrequests an authentication but then deauthenticates\nright away because some new parameters came along.\nEvery time this happens we print a deauth message\nand send a deauth frame, but both of that is rather\nconfusing. Avoid it by aborting the authentication\nprocess silently, and telling cfg80211 about that.\n\nThe patch looks larger than it really is:\n__cfg80211_auth_remove() is split out from\ncfg80211_send_auth_timeout(), there\u0027s no new code\nexcept __cfg80211_auth_canceled() (a one-liner) and\nthe mac80211 bits (7 new lines of code).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9bc383de37090ba7ca3ff32a12c9d809dc5867f0", "tree": "2b502b918f585427b45357e5a9a781ea9f06c263", "parents": [ "5be83de54c16944dea9c16c6a5a53c1fa75ed304" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Nov 19 11:55:19 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 19 11:08:53 2009 -0500" }, "message": "cfg80211: introduce capability for 4addr mode\n\nIt\u0027s very likely that not many devices will support\nfour-address mode in station or AP mode so introduce\ncapability bits for both modes, set them in mac80211\nand check them when userspace tries to use the mode.\nAlso, keep track of 4addr in cfg80211 (wireless_dev)\nand not in mac80211 any more. mac80211 can also be\nimproved for the VLAN case by not looking at the\n4addr flag but maintaining the station pointer for\nit correctly. However, keep track of use_4addr for\nstation mode in mac80211 to avoid all the derefs.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5be83de54c16944dea9c16c6a5a53c1fa75ed304", "tree": "dd251d9331a07ec73c7a4992c79ce30f0553db40", "parents": [ "9bd568a50c446433038dec2a5186c5c57c3dbd23" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Nov 19 00:56:28 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 19 11:08:50 2009 -0500" }, "message": "cfg80211: convert bools into flags\n\nWe\u0027ve accumulated a number of options for wiphys\nwhich make more sense as flags as we keep adding\nmore. Convert the existing ones.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "61fa713c751683da915fa0c1aa502be85822c357", "tree": "a4f286a2bb59b9afd1f3b836cb62a8e81bafee98", "parents": [ "a043897a314e8bcfc821d54fe4e591efed5936a3" ], "author": { "name": "Holger Schurig", "email": "holgerschurig@gmail.com", "time": "Wed Nov 11 12:25:40 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:58 2009 -0500" }, "message": "cfg80211: return channel noise via survey API\n\nThis patch implements the NL80211_CMD_GET_SURVEY command and an get_survey()\nops that a driver can implement. The goal of this command is to allow a\ndrivers to report channel survey data (e.g. channel noise, channel\noccupation).\n\nFor now, only the mechanism to report back channel noise has been\nimplemented.\n\nIn future, there will either be a survey-trigger command --- or the existing\nscan-trigger command will be enhanced. This will allow user-space to\nrequest survey for arbitrary channels.\n\nNote: any driver that cannot report channel noise should not report\nany value at all, e.g. made-up -92 dBm.\n\nSigned-off-by: Holger Schurig \u003cholgerschurig@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "63c5723bc3af8d4e86984dd4ff0c78218de418d0", "tree": "fe900ef2a92377c49c6b3124bb5741a1ac04d436", "parents": [ "e304bfd30f356f7b75d30cad0029ecca705fd590" ], "author": { "name": "Rui Paulo", "email": "rpaulo@gmail.com", "time": "Mon Nov 09 23:46:57 2009 +0000" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:57 2009 -0500" }, "message": "mac80211: add nl80211/cfg80211 handling of the new mesh root mode option.\n\nSigned-off-by: Rui Paulo \u003crpaulo@gmail.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nReviewed-by: Andrey Yurovsky \u003candrey@cozybit.com\u003e\nTested-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d19b3bf6384e66ac6e11a61ee31ed2cfe149f4d8", "tree": "2ec825639458dafddecc7e3d0f83afff9cff0cfa", "parents": [ "be125c60e46e165fbfe33db36a4a9d943d560a5b" ], "author": { "name": "Rui Paulo", "email": "rpaulo@gmail.com", "time": "Mon Nov 09 23:46:55 2009 +0000" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:56 2009 -0500" }, "message": "mac80211: replace \"destination\" with \"target\" to follow the spec\n\nResulting object files have the same MD5 as before.\n\nSigned-off-by: Rui Paulo \u003crpaulo@gmail.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nReviewed-by: Andrey Yurovsky \u003candrey@cozybit.com\u003e\nTested-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8b787643ca0a5130c647109d77fe512f89cfa611", "tree": "b3b0f74c57843a90f8a3822d37237d637c8dcfd0", "parents": [ "1460dd158a520447b87661aea4afda1997d69cde" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Nov 10 18:53:10 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 11 17:02:07 2009 -0500" }, "message": "nl80211: add a parameter for using 4-address frames on virtual interfaces\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ce470613cdfde70f25419cc52a4816315825f5d9", "tree": "0b5d002515bdf4fc34452eb836c57278f27a826b", "parents": [ "b54853f1b157a173fe5ac9145623670c66a9e7b9" ], "author": { "name": "Holger Schurig", "email": "hs4233@mail.mn-solutions.de", "time": "Tue Oct 13 13:28:13 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 27 16:48:16 2009 -0400" }, "message": "cfg80211: no cookies in cfg80211_send_XXX()\n\nGet rid of cookies in cfg80211_send_XXX() functions.\n\nSigned-off-by: Holger Schurig \u003chs4233@mail.mn-solutions.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dfce95f51fe34fa18c87a7d0bea53594b9bf1b9a", "tree": "2a5ad730134289b6a792af8a2cbd9d1aa3507f55", "parents": [ "4890e3beddfb4a6859c4bb782c9cd05dd94ead82" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Thu Sep 24 11:02:42 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Oct 07 16:39:46 2009 -0400" }, "message": "cfg80211: add firmware and hardware version to wiphy\n\nIt\u0027s useful to provide firmware and hardware version to user space and have a\ngeneric interface to retrieve them. Users can provide the version information\nin bug reports etc.\n\nAdd fields for firmware and hardware version to struct wiphy.\n\n(Dropped nl80211 bits for now and modified remaining bits in favor of\nethtool. -- JWL)\n\nCc: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3d23e349d807177eaf519d444677cee86b1a04cf", "tree": "e800dee247598e59185ddd2dd47d2ac6fe090b9c", "parents": [ "bc974f4a230756faf4f69114f271de2e678b363b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Sep 29 23:27:28 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Oct 07 16:39:43 2009 -0400" }, "message": "wext: refactor\n\nRefactor wext to\n * split out iwpriv handling\n * split out iwspy handling\n * split out procfs support\n * allow cfg80211 to have wireless extensions compat code\n w/o CONFIG_WIRELESS_EXT\n\nAfter this, drivers need to\n - select WIRELESS_EXT\t- for wext support\n - select WEXT_PRIV\t- for iwpriv support\n - select WEXT_SPY\t- for iwspy support\n\nexcept cfg80211 -- which gets new hooks in wext-core.c\nand can then get wext handlers without CONFIG_WIRELESS_EXT.\n\nWireless extensions procfs support is auto-selected\nbased on PROC_FS and anything that requires the wext core\n(i.e. WIRELESS_EXT or CFG80211_WEXT).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ad002395fd230528281083f4be71855ed7e35b04", "tree": "c2bccce17ad69dcfb454fe3a38ba68f0f210b5b5", "parents": [ "21f8a73f829797eb7ebc12202b4c68e10e751ddb" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Aug 18 19:51:57 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:36:05 2009 -0400" }, "message": "cfg80211: fix dangling scan request checking\n\nMy patch \"cfg80211: fix deadlock\" broke the code it\nwas supposed to fix, the scan request checking. But\nit\u0027s not trivial to put it back the way it was, since\nthe original patch had a deadlock.\n\nNow do it in a completely new way: queue the check\noff to a work struct, where we can freely lock. But\nthat has some more complications, like needing to\nwait for it to be done before the wiphy/rdev can be\ndestroyed, so some code is required to handle that.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "16cb9d42b68b339852e8914f2538ca9a2aec616c", "tree": "aef8822ae4d5dc7574af3c52501b8d6449c2ccc0", "parents": [ "36e6fea84905512ea776707e82b5b435220efc17" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Aug 12 23:33:20 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 14 09:14:08 2009 -0400" }, "message": "cfg80211: allow driver to override PS default\n\nSometimes drivers might have a good reason to override\nthe PS default, like iwlwifi right now where it affects\nRX performance significantly at this point. This will\nallow them to override the default, if desired, in a\nway that users can still change it according to their\ntrade-off choices, not the driver\u0027s, like would happen\nif the driver just disabled PS completely then.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d5b96a6f39a8aaa7534069b3db71048df44f023b", "tree": "f02b5a32440794d33b6a18ea78a491ede05cb061", "parents": [ "1afcfd54fdf913017c07fa1ee497141a7958991d" ], "author": { "name": "Pat Erley", "email": "pat-lkml@erley.org", "time": "Sat Aug 08 17:53:19 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 14 09:13:53 2009 -0400" }, "message": "mac80211: remove max_bandwidth\n\nThis removes the max_bandwidth attribute. It is only ever\nwritten to, and is duplicated by max_bandwidth_khz in the\nregulatory code.\n\nSigned-off-by: Pat Erley \u003cpat-lkml@erley.org\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5ba63533bbf653631faab60f6988506160ec6ba4", "tree": "8d9ef2670cd3b2f50fe3581820fba5aca365634d", "parents": [ "ad5351db89681515681c5d5659ddf4c69e3cc6f5" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Aug 07 17:54:07 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 14 09:13:44 2009 -0400" }, "message": "cfg80211: fix alignment problem in scan request\n\nThe memory layout for scan requests was rather wrong,\nwe put the scan SSIDs before the channels which could\nlead to the channel pointers being unaligned in memory.\nIt turns out that using a pointer to the channel array\nisn\u0027t necessary anyway since we can embed a zero-length\narray into the struct.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f5ea9120be2e5d5c846243416cfdce01d02f5836", "tree": "cade27e47a90dde79a523598b96a2ebb50770d2f", "parents": [ "f401a6f7ede753e56b84025e7d2db0d5ef560ce6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Aug 07 16:17:38 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 14 09:13:43 2009 -0400" }, "message": "nl80211: add generation number to all dumps\n\nIn order for userspace to be able to figure out whether\nit obtained a consistent snapshot of data or not when\nusing netlink dumps, we need to have a generation number\nin each dump message that indicates whether the list has\nchanged or not -- its value is arbitrary.\n\nThis patch adds such a number to all dumps, this needs\nsome mac80211 involvement to keep track of a generation\nnumber to start with when adding/removing mesh paths or\nstations.\n\nThe wiphy and netdev lists can be fully handled within\ncfg80211, of course, but generation numbers need to be\nstored there as well.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f401a6f7ede753e56b84025e7d2db0d5ef560ce6", "tree": "12b077096234ba0f990c637665d11e0afa608b17", "parents": [ "59bbb6f7574bc693ed8313b98eac641116c95b94" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Aug 07 14:51:05 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 14 09:13:43 2009 -0400" }, "message": "cfg80211: use reassociation when possible\n\nWith the move of everything related to the SME from\nmac80211 to cfg80211, we lost the ability to send\nreassociation frames. This adds them back, but only\nfor wireless extensions. With the userspace SME, it\nshall control assoc vs. reassoc (it already can do\nso with the nl80211 interface).\n\nI haven\u0027t touched the connect() implementation, so\nit is not possible to reassociate with the nl80211\nconnect primitive. I think that should be done with\nthe NL80211_CMD_ROAM command, but we\u0027ll have to see\nhow that can be handled in the future, especially\nwith fullmac chips.\n\nThis patch addresses only the immediate regression\nwe had in mac80211, which previously sent reassoc.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "aa11d958d1a6572eda08214d7c6a735804fe48a5", "tree": "d025b05270ad1e010660d17eeadc6ac3c1abbd7d", "parents": [ "07f6642ee9418e962e54cbc07471cfe2e559c568", "9799218ae36910af50f002a5db1802d576fffb43" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 12 17:44:53 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 12 17:44:53 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tarch/microblaze/include/asm/socket.h\n" }, { "commit": "8b19e6ca3bac7e04e93fb73f561d670e77c5fae6", "tree": "50a1487febe99b670aab253c4eebee2b8b3c8268", "parents": [ "abc7381bcca6ce9dc101f112a13e14957bfbda7e" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Jul 30 17:38:09 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Aug 04 16:44:19 2009 -0400" }, "message": "cfg80211: enable country IE support to all cfg80211 drivers\n\nSince the bss is always set now once we are connected, if the\nbss has its own information element we refer to it and pass that\ninstead of relying on mac80211\u0027s parsing.\n\nNow all cfg80211 drivers get country IE support, automatically and\nwe reduce the call overhead that we had on mac80211 which called this\nupon every beacon and instead now call this only upon a successfull\nconnection by a STA on cfg80211.\n\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "371842448c05b42d11a4be1c8e4e81d62ecc7534", "tree": "37c6f66d8a34999801cd09abffd7d7b66c0925dd", "parents": [ "cd3468bad96c00b5a512f551674f36776129520e" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Jul 30 17:43:48 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 03 16:31:21 2009 -0400" }, "message": "cfg80211: fix regression on beacon world roaming feature\n\nA regression was added through patch a4ed90d6:\n\n\"cfg80211: respect API on orig_flags on channel for beacon hint\"\n\nWe did indeed respect _orig flags but the intention was not clearly\nstated in the commit log. This patch fixes firmware issues picked\nup by iwlwifi when we lift passive scan of beaconing restrictions\non channels its EEPROM has been configured to always enable.\n\nBy doing so though we also disallowed beacon hints on devices\nregistering their wiphy with custom world regulatory domains\nenabled, this happens to be currently ath5k, ath9k and ar9170.\nThe passive scan and beacon restrictions on those devices would\nnever be lifted even if we did find a beacon and the hardware did\nsupport such enhancements when world roaming.\n\nSince Johannes indicates iwlwifi firmware cannot be changed to\nallow beacon hinting we set up a flag now to specifically allow\ndrivers to disable beacon hints for devices which cannot use them.\n\nWe enable the flag on iwlwifi to disable beacon hints and by default\nenable it for all other drivers. It should be noted beacon hints lift\npassive scan flags and beacon restrictions when we receive a beacon from\nan AP on any 5 GHz non-DFS channels, and channels 12-14 on the 2.4 GHz\nband. We don\u0027t bother with channels 1-11 as those channels are allowed\nworld wide.\n\nThis should fix world roaming for ath5k, ath9k and ar9170, thereby\nimproving scan time when we receive the first beacon from any AP,\nand also enabling beaconing operation (AP/IBSS/Mesh) on cards which\nwould otherwise not be allowed to do so. Drivers not using custom\nregulatory stuff (wiphy_apply_custom_regulatory()) were not affected\nby this as the orig_flags for the channels would have been cleared\nupon wiphy registration.\n\nI tested this with a world roaming ath5k card.\n\nCc: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1f9298f96082692bdfe73af6fc2167f627f21647", "tree": "ac99b1e27f93e0f4296112af23f78ab7e3a36144", "parents": [ "562e482265ac4d660d9f0114419591d62f44361d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Jul 27 12:01:52 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jul 29 15:46:18 2009 -0400" }, "message": "cfg80211: combine IWESSID handlers\n\nSince we now have handlers IWESSID for all modes, we can\ncombine them into one.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "562e482265ac4d660d9f0114419591d62f44361d", "tree": "fd57e0b515aef085a4eb1fc0d351811c82210db8", "parents": [ "0e82ffe3b90bcad72cfe80e4379946b8fb0691ca" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Jul 27 12:01:51 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jul 29 15:46:16 2009 -0400" }, "message": "cfg80211: combine IWAP handlers\n\nSince we now have IWAP handlers for all modes, we can\ncombine them into one.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0e82ffe3b90bcad72cfe80e4379946b8fb0691ca", "tree": "c6b73524d4db86ddcaa866d7ea81a9600b610413", "parents": [ "a7bc376c858e0e724b8cb2db09b6874562d377ca" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Jul 27 12:01:50 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jul 29 15:46:14 2009 -0400" }, "message": "cfg80211: combine iwfreq implementations\n\nUntil now we implemented iwfreq for managed mode, we\nneeded to keep the implementations separate, but now\nthat we have all versions implemented we can combine\nthem and export just one handler.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "463d018323851a608eef52a9427b0585005c647f", "tree": "b5ad2ee6115e6b780c264022cbc20b36d22fe80c", "parents": [ "5061b0c2b9066de426fbc63f1278d2210e789412" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 14 00:33:35 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 27 15:24:07 2009 -0400" }, "message": "cfg80211: make aware of net namespaces\n\nIn order to make cfg80211/nl80211 aware of network namespaces,\nwe have to do the following things:\n\n * del_virtual_intf method takes an interface index rather\n than a netdev pointer - simply change this\n\n * nl80211 uses init_net a lot, it changes to use the sender\u0027s\n network namespace\n\n * scan requests use the interface index, hold a netdev pointer\n and reference instead\n\n * we want a wiphy and its associated virtual interfaces to be\n in one netns together, so\n - we need to be able to change ns for a given interface, so\n export dev_change_net_namespace()\n - for each virtual interface set the NETIF_F_NETNS_LOCAL\n flag, and clear that flag only when the wiphy changes ns,\n to disallow breaking this invariant\n\n * when a network namespace goes away, we need to reparent the\n wiphy to init_net\n\n * cfg80211 users that support creating virtual interfaces must\n create them in the wiphy\u0027s namespace, currently this affects\n only mac80211\n\nThe end result is that you can now switch an entire wiphy into\na different network namespace with the new command\n\tiw phy#\u003cidx\u003e set netns \u003cpid\u003e\nand all virtual interfaces will follow (or the operation fails).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ca3dbc20d47ae43c201c215259d078e227bfcf01", "tree": "6812bfccf5e2a0108c58facf3ed1b889616fb2db", "parents": [ "a43816df2a1a61effcb701037bdf63621d066182" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Fri Jul 10 14:54:58 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 24 15:05:11 2009 -0400" }, "message": "cfg80211: update misleading comment\n\nIn cfg80211_scan_request n_channels refers to the total number\nof channels to scan. Update the misleading comment accordingly.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fffd0934b9390f34bec45762192b7edd3b12b4b5", "tree": "d9779803763261f5795fe39a402d79c4220a3a22", "parents": [ "b9454e83cac42fcdc90bfbfba479132bd6629455" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 08 14:22:54 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 24 15:05:09 2009 -0400" }, "message": "cfg80211: rework key operation\n\nThis reworks the key operation in cfg80211, and now only\nallows, from userspace, configuring keys (via nl80211)\nafter the connection has been established (in managed\nmode), the IBSS been joined (in IBSS mode), at any time\n(in AP[_VLAN] modes) or never for all the other modes.\n\nIn order to do shared key authentication correctly, it\nis now possible to give a WEP key to the AUTH command.\nTo configure static WEP keys, these are given to the\nCONNECT or IBSS_JOIN command directly, for a userspace\nSME it is assumed it will configure it properly after\nthe connection has been established.\n\nSince mac80211 used to check the default key in IBSS\nmode to see whether or not the network is protected,\nit needs an update in that area, as well as an update\nto make use of the WEP key passed to auth() for shared\nkey authentication.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "667503ddcb96f3b10211f997fe55907fa7509841", "tree": "5e2559e94a716bb81bfc7566e3e3a05267810c31", "parents": [ "4f5dadcebb55fccef34722bbbf6401d39124c8a4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 07 03:56:11 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:02:32 2009 -0400" }, "message": "cfg80211: fix locking\n\nOver time, a lot of locking issues have crept into\nthe smarts of cfg80211, so e.g. scan completion can\nrace against a new scan, IBSS join can race against\nleaving an IBSS, etc.\n\nIntroduce a new per-interface lock that protects\nmost of the per-interface data that we need to keep\ntrack of, and sprinkle assertions about that lock\neverywhere. Some things now need to be offloaded to\nwork structs so that we don\u0027t require being able to\nsleep in functions the drivers call. The exception\nto that are the MLME callbacks (rx_auth etc.) that\ncurrently only mac80211 calls because it was easier\nto do that there instead of in cfg80211, and future\ndrivers implementing those calls will, if they ever\nexist, probably need to use a similar scheme like\nmac80211 anyway...\n\nIn order to be able to handle _deauth and _disassoc\nproperly, introduce a cookie passed to it that will\ndetermine locking requirements.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cb0b4beb93d14429bf0c50fc1ab8e26348dca880", "tree": "2bdb9aa1f2b3e7e2fdd9425da5ab6aa062134aa5", "parents": [ "c238c8ac63f2d33ea5e7c0b9e9e0ccd8ae9a34e4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 07 03:56:07 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:02:31 2009 -0400" }, "message": "cfg80211: mlme API must be able to sleep\n\nAfter the mac80211 mlme cleanup, we can require that\nthe MLME functions in cfg80211 can sleep. This will\nsimplify future work in cfg80211 a lot.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c238c8ac63f2d33ea5e7c0b9e9e0ccd8ae9a34e4", "tree": "c1153e29df9ae06fa5d2a7539aa24edc97af9122", "parents": [ "78485475618cf9f1c70dc7f15e8deafa8b6074ab" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 07 03:56:06 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:02:31 2009 -0400" }, "message": "cfg80211: dont use union for wext\n\nOtherwise it becomes very hard to reset the structs\ncorrectly since wext can be configured while the\ninterface is down.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3e5d7649a64e558e4146ddfad4dfcf13fc65dd47", "tree": "fa51725ca07cf682e6694ba5f107d8614d9f0972", "parents": [ "2ffa5fede379091bf62a732462b829e4b51af054" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 07 14:37:26 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:02:30 2009 -0400" }, "message": "cfg80211: let SME control reassociation vs. association\n\nSince we don\u0027t really know that well in the kernel,\nlet\u0027s let the SME control whether it wants to use\nreassociation or not, by allowing it to give the\nprevious BSSID in the associate() parameters.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "19957bb399e2722719c0e20c9ae91cf8b6aaff04", "tree": "9c4d53fe5938ceee41333a1afd5be0ed5c1ce313", "parents": [ "517357c685ccc4b5783cc7dbdae8824ada19a97f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jul 02 17:20:43 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:53 2009 -0400" }, "message": "cfg80211: keep track of BSSes\n\nIn order to avoid problems with BSS structs going away\nwhile they\u0027re in use, I\u0027ve long wanted to make cfg80211\nkeep track of them. Without the SME, that wasn\u0027t doable\nbut now that we have the SME we can do this too. It can\nkeep track of up to four separate authentications and\none association, regardless of whether it\u0027s controlled\nby the cfg80211 SME or the userspace SME.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "517357c685ccc4b5783cc7dbdae8824ada19a97f", "tree": "1e3532ca39233dd59b106011788f68a21ffc88c4", "parents": [ "0eb14647fc6b56f73efb28a72ca0c7cc03a653f9" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jul 02 17:18:40 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:53 2009 -0400" }, "message": "cfg80211: assimilate and export ieee80211_bss_get_ie\n\nThis function from mac80211 seems generally useful, and\nI will need it in cfg80211 soon.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8990646d2fafeacfacba4a4b1073a4216662089a", "tree": "357fcf85f7e982b9f06aaac9e7c3468c6af0333f", "parents": [ "9930380f0bd8405fa6a51d644f3de88c30666519" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:27:00 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:52 2009 -0400" }, "message": "cfg80211: implement get_wireless_stats\n\nBy dropping the noise reporting, we can implement\nwireless stats in cfg80211. We also make the\nhandler return NULL if we have no information,\nwhich is possible thanks to the recent wext change.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9930380f0bd8405fa6a51d644f3de88c30666519", "tree": "71cd68830b11b648d6b79f1575dc9960631a2ab2", "parents": [ "ab737a4f7dbe57b12b73f482a7b973bf00b41942" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:59 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:52 2009 -0400" }, "message": "cfg80211: implement IWRATE\n\nFor now, let\u0027s implement that using a very hackish way:\nsimply mirror the wext API in the cfg80211 API. This\nwill have to be changed later when we implement proper\nbitrate API.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ab737a4f7dbe57b12b73f482a7b973bf00b41942", "tree": "33f3c44073921b9fa4c96ea5501dbfcad59567ac", "parents": [ "bc92afd92088ab41223383cc6863ab4792533c54" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:58 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:52 2009 -0400" }, "message": "cfg80211: implement IWAP for WDS\n\nThis implements siocsiwap/giwap for WDS mode.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bc92afd92088ab41223383cc6863ab4792533c54", "tree": "a31d14843f5a63a4a4561bb2ac59e83f4550433c", "parents": [ "f21293549f60f88c74fcb9944737f11048896dc4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:57 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:51 2009 -0400" }, "message": "cfg80211: implement iwpower\n\nJust on/off and timeout, and with a hacky cfg80211 method\nuntil we figure out what we want, though this is probably\nsufficient as we want to use pm_qos for wifi everywhere.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f21293549f60f88c74fcb9944737f11048896dc4", "tree": "d4a00663f87816c0c742e74d7b2c9bad31a18816", "parents": [ "6829c878ecd24ff0ae41b4668c7e9d0f11b66942" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:56 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:51 2009 -0400" }, "message": "cfg80211: managed mode wext compatibility\n\nThis adds code to make it possible to use the cfg80211\nconnect() API with wireless extensions, and because the\nprevious patch added emulation of that API with auth()\nand assoc(), by extension also supports wext on that.\nAt the same time, removes code from mac80211 for wext,\nbut doesn\u0027t yet clean up mac80211\u0027s mlme code more.\n\nSigned-off-by: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6829c878ecd24ff0ae41b4668c7e9d0f11b66942", "tree": "acf78b685d60694040953b4f61d768b95b79e45d", "parents": [ "b23aa676ab9d54469cda9f7151f51a2851c6f36e" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jul 02 09:13:27 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:51 2009 -0400" }, "message": "cfg80211: emulate connect with auth/assoc\n\nThis adds code to cfg80211 so that drivers (mac80211 right\nnow) that don\u0027t implement connect but rather auth/assoc can\nstill be used with the nl80211 connect command. This will\nalso be necessary for the wext compat code.\n\nSigned-off-by: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b23aa676ab9d54469cda9f7151f51a2851c6f36e", "tree": "dd4af5fa38dbfec362ded1d655ed584bbcf60a53", "parents": [ "6a669e65c5ec393a650362874e13f7d3365a7827" ], "author": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Wed Jul 01 21:26:54 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:51 2009 -0400" }, "message": "cfg80211: connect/disconnect API\n\nThis patch introduces the cfg80211 connect/disconnect API.\nThe goal here is to run the AUTH and ASSOC steps in one call.\nThis is needed for some fullmac cards that run both steps\ndirectly from the target, after the host driver sends a\nconnect command.\n\nAdditionally, all the new crypto parameters for connect()\nare now also valid for associate() -- although associate\nrequires the IEs to be used, the information can be useful\nfor drivers and should be given.\n\nSigned-off-by: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "aff89a9b9084931e51b89d8f3ee3c547bea6c422", "tree": "592c1dfa2ef994a1b3e117b3d7bc1cc7b7bde637", "parents": [ "5121ea0481f9cea1dfd958f18d7b4ac78778cd40" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:51 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:50 2009 -0400" }, "message": "cfg80211: introduce nl80211 testmode command\n\nThis introduces a new NL80211_CMD_TESTMODE for testing\nand calibration use with nl80211. There\u0027s no multiplexing\nlike like iwpriv had, and the command is not available by\ndefault, it needs to be explicitly enabled in Kconfig and\nshouldn\u0027t be enabled in most kernels.\n\nThe command requires a wiphy index or interface index to\nidentify the device to operate on, and the new TESTDATA\nattribute. There also is API for sending replies to the\ncommand, and testmode multicast messages (on a testmode\nmulticast group).\n\nI\u0027ve also updated mac80211 to be able to pass through the\ncommand to the driver, since it itself doesn\u0027t implement\nthe testmode command.\n\nAdditionally, to give people an idea of how to use the\ncommand, I\u0027ve added a little code to hwsim that makes use\nof the new command to set the powersave mode, this is\ncurrently done via debugfs and should remain there, and\nthe testmode command only serves as an example of how to\nuse this best -- with nested netlink attributes in the\nTESTDATA attribute. A hwsim testmode tool can be found at\nhttp://git.sipsolutions.net/hwsim.git/. This tool is BSD\nlicensed so people can easily use it as a basis for their\nown internal fabrication and validation tools.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7ebbe6bd51a259e16608b3fd7b578f5dd1292a45", "tree": "1c00bb480bf90c9516c983ee373e7825f49b42f6", "parents": [ "e6d6e3420d511cd7552a95d1f04bd4c80a9ddb34" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:48 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:49 2009 -0400" }, "message": "cfg80211: remove wireless_dev-\u003ebssid\n\nThis variable isn\u0027t necessary -- the wext code keeps\ntrack of the BSSID itself, and otherwise we have\ncurrent_bss.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e6d6e3420d511cd7552a95d1f04bd4c80a9ddb34", "tree": "35f34c9ef8fe4c201da36ca819045995a93eeb44", "parents": [ "dad823302135a2d99efd40e35d94a6ff14961c93" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:47 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:49 2009 -0400" }, "message": "cfg80211: use proper allocation flags\n\nInstead of hardcoding GFP_ATOMIC everywhere, add a\nnew function parameter that gets the flags from the\ncaller. Obviously then I need to update all callers\n(all of them in mac80211), and it turns out that now\nit\u0027s ok to use GFP_KERNEL in almost all places.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f1f74825fe01ac77204ca34e3240dec50a8207c2", "tree": "f6283e6022c137abcd38b1fa9972fdae195d6905", "parents": [ "90e3012e94be0755a516f60f5339a2a08f4a7d0a" ], "author": { "name": "David Kilroy", "email": "kilroyd@googlemail.com", "time": "Thu Jun 18 23:21:13 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:42 2009 -0400" }, "message": "cfg80211: add wrapper function to get wiphy from priv pointer\n\nSigned-off-by: David Kilroy \u003ckilroyd@googlemail.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e36d56b64808aec54b68b4e9976180c1da0933b2", "tree": "93f0e696d077b58d1064f3321d52b4611addf104", "parents": [ "e5a8a896f5180f2950695d2d0b79db348d200ca4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jun 09 21:04:43 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 14:57:38 2009 -0400" }, "message": "cfg80211: pass netdev to change_virtual_intf\n\nIf there was a reason I\u0027m passing the ifidx I cannot\nremember it any more and don\u0027t see one now, so let\u0027s\njust pass the pointer itself.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1f87f7d3a3b42b20f34cb03f0fd1a41c3d0e27f3", "tree": "642882153a48e910a415e6bb23bcfb79fadef6dd", "parents": [ "6081162e2ed78dfcf149b076b047078ab1445cc2" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jun 02 13:01:41 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 03 14:06:14 2009 -0400" }, "message": "cfg80211: add rfkill support\n\nTo be easier on drivers and users, have cfg80211 register an\nrfkill structure that drivers can access. When soft-killed,\nsimply take down all interfaces; when hard-killed the driver\nneeds to notify us and we will take down the interfaces\nafter the fact. While rfkilled, interfaces cannot be set UP.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7643a2c3fcc13cd6fbd731f214463547383418ae", "tree": "e2e41315f0d38a8627456303820b5c1c2a9b54a6", "parents": [ "c64fb01627e24725d1f9d535e4426475a4415753" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jun 02 13:01:39 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 03 14:06:14 2009 -0400" }, "message": "cfg80211: move txpower wext from mac80211\n\nThis patch introduces new cfg80211 API to set the TX power\nvia cfg80211, puts the wext code into cfg80211 and updates\nmac80211 to use all that. The -ENETDOWN bits are a hack but\nwill go away soon.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e31a16d6f64ef0e324c6f54d5112703c3f13a9c4", "tree": "4ed30d0ebd1d948aaa14bcd4fb52f29d9bb2e7a8", "parents": [ "a971be223f243311a8014ddfc721f68e3ef2da9c" ], "author": { "name": "Zhu Yi", "email": "yi.zhu@intel.com", "time": "Thu May 21 21:47:03 2009 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 22 14:06:02 2009 -0400" }, "message": "wireless: move some utility functions from mac80211 to cfg80211\n\nThe patch moves some utility functions from mac80211 to cfg80211.\nBecause these functions are doing generic 802.11 operations so they\nare not mac80211 specific. The moving allows some fullmac drivers\nto be also benefit from these utility functions.\n\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nSigned-off-by: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e3da574a0ddd3e90a1e2b788b84b94bc17a75172", "tree": "dc17ed9268594c1236e1f0b5efae2140b226b5cf", "parents": [ "73606d00360cb93963aeb7bfbf8bfdbc51cfab9f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon May 18 19:56:36 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 20 14:46:30 2009 -0400" }, "message": "cfg80211: allow wext to remove keys that don\u0027t exist\n\nSome applications using wireless extensions expect to be able to\nremove a key that doesn\u0027t exist. One example is wpa_supplicant\nwhich doesn\u0027t actually change behaviour when running into an\nerror while trying to do that, but it prints an error message\nwhich users interpret as wpa_supplicant having problems.\n\nThe safe thing to do is not change the behaviour of wireless\nextensions any more, so when the driver reports -ENOENT let\nthe wext bridge code return success to userspace. To guarantee\nthis, also document that drivers should return -ENOENT when the\nkey doesn\u0027t exist.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cf5aa2f1f39d367d449df4c10de3d8e6f9c4443b", "tree": "c713414a38ac7cc5c3c7fbc7e19f830c0e584d64", "parents": [ "3dcf670baf3d3a9bfc752e59d0b1a8d886230750" ], "author": { "name": "David Kilroy", "email": "kilroyd@googlemail.com", "time": "Sat May 16 23:13:47 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 20 14:46:27 2009 -0400" }, "message": "cfg80211: mark wiphy-\u003eprivid as pointer to const\n\nThis allows drivers to use a const pointer as the privid without a cast.\n\nSigned-off-by: David Kilroy \u003ckilroyd@gmail.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3dcf670baf3d3a9bfc752e59d0b1a8d886230750", "tree": "843e1fbcfb9d2e62fbd7b419e7b8bf80b494cc61", "parents": [ "c15ff610453a6daa708f32b1c00b8344d3a462dd" ], "author": { "name": "David Kilroy", "email": "kilroyd@googlemail.com", "time": "Sat May 16 23:13:46 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 20 14:46:27 2009 -0400" }, "message": "cfg80211: mark ops as pointer to const\n\nThis allows drivers to mark their cfg80211_ops tables const.\n\nSigned-off-by: David Kilroy \u003ckilroyd@googlemail.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "689da1b3b8b37ff41e79f3fb973c06cdfeef12e5", "tree": "57accde02817fa1fdb61ddafd16263294e065ed8", "parents": [ "038659e7c6b385065cb223872771ac437ef70b62" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Sat May 02 00:37:18 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 20 14:46:22 2009 -0400" }, "message": "wireless: rename IEEE80211_CHAN_NO_FAT_* to HT40-/+\n\nThis is more consistent with our nl80211 naming convention\nfor HT40-/+.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "038659e7c6b385065cb223872771ac437ef70b62", "tree": "df9e86adcc611d10ed5f98672421bffe1f43989f", "parents": [ "97bc54152e3a91dd2dc297e8a084c05e93527e60" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Sat May 02 00:37:17 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 20 14:46:22 2009 -0400" }, "message": "cfg80211: Process regulatory max bandwidth checks for HT40\n\nWe are not correctly listening to the regulatory max bandwidth\nsettings. To actually make use of it we need to redesign things\na bit. This patch does the work for that. We do this to so we\ncan obey to regulatory rules accordingly for use of HT40.\n\nWe end up dealing with HT40 by having two passes for each channel.\n\nThe first check will see if a 20 MHz channel fits into the channel\u0027s\ncenter freq on a given frequency range. We check for a 20 MHz\nbanwidth channel as that is the maximum an individual channel\nwill use, at least for now. The first pass will go ahead and\ncheck if the regulatory rule for that given center of frequency\nallows 40 MHz bandwidths and we use this to determine whether\nor not the channel supports HT40 or not. So to support HT40 you\u0027ll\nneed at a regulatory rule that allows you to use 40 MHz channels\nbut you\u0027re channel must also be enabled and support 20 MHz by itself.\n\nThe second pass is done after we do the regulatory checks over\nan device\u0027s supported channel list. On each channel we\u0027ll check\nif the control channel and the extension both:\n\n o exist\n o are enabled\n o regulatory allows 40 MHz bandwidth on its frequency range\n\nThis work allows allows us to idependently check for HT40- and\nHT40+.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3f77316c6b99f596bfbf72c0542f47f7230b702e", "tree": "d9c8634e62917687c9a2741fdd72dd2c19c04727", "parents": [ "eccb8e8f0c3af47aeb6dbe4012eb8d4fc888767a" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Mon May 11 21:57:57 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 13 15:44:37 2009 -0400" }, "message": "nl80211: Add IEEE 802.1X PAE control for station mode\n\nAdd a new NL80211_ATTR_CONTROL_PORT flag for NL80211_CMD_ASSOCIATE to\nallow user space to indicate that it will control the IEEE 802.1X port\nin station mode. Previously, mac80211 was always marking the port\nauthorized in station mode. This was enough when drop_unencrypted flag\nwas set. However, drop_unencrypted can currently be controlled only\nwith WEXT and the current nl80211 design does not allow fully secure\nconfiguration. Fix this by providing a mechanism for user space to\ncontrol the IEEE 802.1X port in station mode (i.e., do the same that\nwe are already doing in AP mode).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eccb8e8f0c3af47aeb6dbe4012eb8d4fc888767a", "tree": "3705a833e4a5efb08beb2bfc4175775171e74295", "parents": [ "0e46724a48fcc3bac1fecea413d20af64a75844f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon May 11 21:57:56 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 13 15:44:35 2009 -0400" }, "message": "nl80211: improve station flags handling\n\nIt is currently not possible to modify station flags, but that\ncapability would be very useful. This patch introduces a new\nnl80211 attribute that contains a set/mask for station flags,\nand updates the internal API (and mac80211) to mirror that.\n\nThe new attribute is parsed before falling back to the old so\nthat userspace can specify both (if it can) to work on all\nkernels.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "08645126dd24872c2e27014f93968f7312e29176", "tree": "2011cb3cb2f70d35278ef3b39ea696a058fb7b29", "parents": [ "7be69c0b9aa93ef655db4d46e5654996489d62f5" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon May 11 13:54:58 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 13 15:44:32 2009 -0400" }, "message": "cfg80211: implement wext key handling\n\nMove key handling wireless extension ioctls from mac80211 to cfg80211\nso that all drivers that implement the cfg80211 operations get wext\ncompatibility.\n\nNote that this drops the SIOCGIWENCODE ioctl support for getting\nIW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will\nno longer report \"Security mode:open\" or \"Security mode:restricted\"\nfor mac80211. However, what we displayed there (the authentication\nalgo used) was actually wrong -- linux/wireless.h states that this\nsetting is meant to differentiate between \"Refuse non-encoded packets\"\nand \"Accept non-encoded packets\".\n\n(Combined with \"cfg80211: fix a couple of bugs with key ioctls\". -- JWL)\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cbe8fa9c5e88fd5f554ebc519af3b0ed17dde0dd", "tree": "0ec44646879e49f7254ba15970ca9a168bc00d8f", "parents": [ "4e943900fb9675d3a5ebdabc2cd4a9a54edace97" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat May 09 20:09:03 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:24:07 2009 -0400" }, "message": "cfg80211: put wext data into substructure\n\nTo make it more apparent in the code what is for wext\nonly (and needs to be #ifdef\u0027ed) put all the info for\nwext into a substruct in each wireless_dev.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4e943900fb9675d3a5ebdabc2cd4a9a54edace97", "tree": "72b6492d01dffa834133c0cdbd52ce4b65392332", "parents": [ "8fbff4b838c53945d6baeafe609c627000f85cd6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat May 09 20:06:47 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:24:07 2009 -0400" }, "message": "cfg80211: constify key mac address in ops\n\nThe address pointed to by mac_addr can be marked as const.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dc6382ced07d6bad61d0b591fb12ab5da7ca632c", "tree": "277d03c28c0756368d663d1b053ceaed196f666e", "parents": [ "ed9b58bc443a1210b5be1ded6421b17e015bf985" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed May 06 22:09:37 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:23:54 2009 -0400" }, "message": "nl80211 : Add support for configuring MFP\n\nNL80211_CMD_ASSOCIATE request must be able to indicate whether\nmanagement frame protection (IEEE 802.11w) is being used. mac80211 was\nable to use MFP in client mode only with WEXT, but the new\nNL80211_ATTR_USE_MFP attribute will allow this to be done with\nnl80211, too.\n\nSince we are currently using nl80211 for MFP only with drivers that\nuse user space SME, only MFP disabled and required values are\nused. However, the NL80211_ATTR_USE_MFP attribute is an enum that can\nbe extended with MFP optional in the future, if that is needed with\nsome drivers (e.g., if the RSN IE is generated by the driver).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1965c85331ed29dc4fd32479ff31663e3e9a518f", "tree": "1542f0fdf4121491671bbb604564cb4f6dd1ad58", "parents": [ "ff2ba188fc5eaae529cb2ef9b127c3ca2a7df4b9" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed Apr 22 21:38:25 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:21 2009 -0400" }, "message": "nl80211: Add event for authentication/association timeout\n\nSME needs to be notified when the authentication or association\nattempt times out and MLME has stopped processing in order to allow\nthe SME to decide what to do next.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8e30bc55de98c000b0b836cb42525c82f605f191", "tree": "6b413976c2064157c3268b87921d4e2a7595f831", "parents": [ "e255d5eb2b478eec1416b46aea03798b64355402" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Apr 22 17:45:38 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:20 2009 -0400" }, "message": "nl80211: allow configuring IBSS beacon interval\n\nMake the JOIN_IBSS command look at the beacon interval\nattribute to see if the user requested a specific beacon\ninterval, if not default to 100 TU (wext too).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b9a5f8cab751d362f7c2d94899ca788c22fcd1ef", "tree": "e769e2f59ef845cf7c7cc93b64d33eeed49bb9f7", "parents": [ "9e52b0623c6eb49c3f23a326c1fb97bdecc49ba1" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Mon Apr 20 18:39:05 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "nl80211: Add set/get for frag/rts threshold and retry limits\n\nAdd new nl80211 attributes that can be used with NL80211_CMD_SET_WIPHY\nand NL80211_CMD_GET_WIPHY to manage fragmentation/RTS threshold and\nretry limits.\n\nSince these values are stored in struct wiphy, remove the local copy\nfrom mac80211 where feasible (frag \u0026 rts threshold). The retry limits\nare currently needed in struct ieee80211_conf, but these could be\neventually removed since the driver should have access to the values\nin struct wiphy.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d323655372590c533c275b1d798f9d1221efb5c6", "tree": "7eb0e7ecb88b09cead5a36b5aa93328b199e5c25", "parents": [ "af8cdcd828ad751fae8e6cbfe94eef9f2f23b14b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Apr 20 14:31:42 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "cfg80211: clean up includes\n\nTrying to separate header files into net/wireless.h and\nnet/cfg80211.h has been a source of confusion. Remove\nnet/wireless.h (because there also is the linux/wireless.h)\nand subsume everything into net/cfg80211.h -- except the\ndefinitions for regulatory structures which get moved to\na new header net/regulatory.h.\n\nThe \"new\" net/cfg80211.h is now divided into sections.\n\nThere are no real changes in this patch but code shuffling\nand some very minor documentation fixes.\n\nI have also, to make things reflect reality, put in a\ncopyright line for Luis to net/regulatory.h since that\nis probably exclusively written by him but was formerly\nin a file that only had my copyright line.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "04a773ade0680d862b479d7219973df60f7a3834", "tree": "fc759eb79099fefd7f1329bcb2b703008cb0adfe", "parents": [ "691597cb26f236ac7471f1adf925a134c86799d6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Apr 19 21:24:32 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "cfg80211/nl80211: add IBSS API\n\nThis adds IBSS API along with (preliminary) wext handlers.\nThe wext handlers can only do IBSS so you need to call them\nfrom your own wext handlers if the mode is IBSS.\n\nThe nl80211 API requires\n * an SSID\n * a channel (frequency) for the case that a new IBSS\n has to be created\n\nIt optionally supports\n * a flag to fix the channel\n * a fixed BSSID\n\nThe cfg80211 code also takes care to leave the IBSS before\nthe netdev is set down. If wireless extensions are used, it\nalso caches values when the interface is down and instructs\nthe driver to join when the interface is set up.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "691597cb26f236ac7471f1adf925a134c86799d6", "tree": "e89d91e496af082711b7c0789aaf0a985e7ba964", "parents": [ "d726405af6c8c81d2ee5e6a29301c68b9d4c574f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Apr 19 19:57:45 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "cfg80211/mac80211: move wext SIWMLME into cfg80211\n\nSince we have -\u003edeauth and -\u003edisassoc we can support the\nwext SIWMLME call directly without driver wext handlers.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "de95a54b1aebe5592cae971ca5e5d9ec6a381a17", "tree": "55a622d1e61e73cd6426c5e0643ac9fd117a9fe8", "parents": [ "18a8365992a8041aa178ae9ad5f0d951d0457230" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Apr 01 11:58:36 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:39 2009 -0400" }, "message": "mac80211: pass all probe request IEs to driver\n\nInstead of just passing the cfg80211-requested IEs, pass\nthe locally generated ones as well.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "06aa7afaaa21a4e7f1bcb196bd3f29193924a603", "tree": "1337931da6e0c1e41b9f0460aea80b2a03cc7eae", "parents": [ "964c1d417e4738d359ba263921a7b9c18fa711c4" ], "author": { "name": "Jussi Kivilinna", "email": "jussi.kivilinna@mbnet.fi", "time": "Thu Mar 26 23:40:09 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:36 2009 -0400" }, "message": "cfg80211: add cfg80211_inform_bss\n\nAdded cfg80211_inform_bss() for full-mac devices to use.\n\nSigned-off-by: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a3b8b0569fbef725597f05278ec58083321f6e9d", "tree": "cb3beb05c841a9564a3fdd44d540570c7b89c9f6", "parents": [ "53b46b8444f600cc1744521ea096ea0c5d494dd0" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Fri Mar 27 21:59:49 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:28 2009 -0400" }, "message": "nl80211: Add Michael MIC failure event\n\nDefine a new nl80211 event, NL80211_CMD_MICHAEL_MIC_FAILURE, to be\nused to notify user space about locally detected Michael MIC failures.\nThis matches with the MLME-MICHAELMICFAILURE.indication() primitive.\n\nSince we do not actually have TSC in the skb anymore when\nmac80211_ev_michael_mic_failure() is called, that function is changed\nto take in the TSC as an optional parameter instead of as a\nrequirement to include the TSC after the hdr field (which we did not\nreally follow). For now, TSC is not included in the events from\nmac80211, but it could be added at some point.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "53b46b8444f600cc1744521ea096ea0c5d494dd0", "tree": "2f9d3a465a55be2992a8f895c1d09f4cdff3c060", "parents": [ "1778092e1739155acec35a3bccee2fb8a1ae4e91" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Fri Mar 27 20:53:56 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:28 2009 -0400" }, "message": "nl80211: Generate deauth/disassoc event for locally generated frames\n\nPreviously, nl80211 mlme events were generated only for received\ndeauthentication and disassociation frames. We need to do the same for\nlocally generated ones in order to let applications know that we\ndisconnected (e.g., when AP does not reply to a probe). Rename the\nnl80211 and cfg80211 functions (s/rx_//) to make it clearer that they\nare used for both received and locally generated frames.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "07f62d01c1f476a3b328a44faafdfd103a4dedc3", "tree": "9e574206b85bb225f64aaab572840109bf54e71f", "parents": [ "fd7fbb17bec7b055fafec4d0ae3bfb4ed60cad8b" ], "author": { "name": "Huang Weiyi", "email": "weiyi.huang@gmail.com", "time": "Fri Mar 27 22:20:27 2009 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:28 2009 -0400" }, "message": "cfg80211: remove duplicated #include\n\nRemove duplicated #include in include/net/cfg80211.h.\n\nSigned-off-by: Huang Weiyi \u003cweiyi.huang@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a08c1c1ac0c26229ca1ca45d554b209a56edc8be", "tree": "b49e2968fae2612ced8a090a659309b1300fe7cb", "parents": [ "9050bdd8589c373e01e41ddbd9a192de2ff01ef0" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Sun Mar 22 21:57:28 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:13 2009 -0400" }, "message": "cfg80211: add feature to hold bss\n\nIn beacon filtering there needs to be a way to not expire the BSS even\nwhen no beacons are received. Add an interface to cfg80211 to hold\nBSS and make sure that it\u0027s not expired.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "65fc73ac4a310945dfeceac961726c2765ad2ec0", "tree": "5c1410524f3a82b653d6a08753fbe5bdd9a984fa", "parents": [ "feeb44454996cf5b375fad21697bf6202fe30dd2" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Fri Mar 20 21:21:16 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:04 2009 -0400" }, "message": "nl80211: Remove NL80211_CMD_SET_MGMT_EXTRA_IE\n\nThe functionality that NL80211_CMD_SET_MGMT_EXTRA_IE provided can now\nbe achieved with cleaner design by adding IE(s) into\nNL80211_CMD_TRIGGER_SCAN, NL80211_CMD_AUTHENTICATE,\nNL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, and\nNL80211_CMD_DISASSOCIATE.\n\nSince this is a very recently added command and there are no known (or\nknown planned) applications using NL80211_CMD_SET_MGMT_EXTRA_IE and\ntaken into account how much extra complexity it adds to the IE\nprocessing we have now (and need to add in the future to fix IE order\nin couple of frames), it looks like the best option is to just remove\nthe implementation of this command for now. The enum values themselves\nare left to avoid changing the nl80211 command or attribute numbers.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "636a5d3625993c5ca59abc81794b9ded93cdb740", "tree": "53ee8d522153c36c631f8cb733a6e808c20ef332", "parents": [ "6039f6d23fe792d615da5449e9fa1c6b43caacf6" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Thu Mar 19 13:39:22 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:02 2009 -0400" }, "message": "nl80211: Add MLME primitives to support external SME\n\nThis patch adds new nl80211 commands to allow user space to request\nauthentication and association (and also deauthentication and\ndisassociation). The commands are structured to allow separate\nauthentication and association steps, i.e., the interface between\nkernel and user space is similar to the MLME SAP interface in IEEE\n802.11 standard and an user space application takes the role of the\nSME.\n\nThe patch introduces MLME-AUTHENTICATE.request,\nMLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and\nMLME-DISASSOCIATE.request primitives. The authentication and\nassociation commands request the actual operations in two steps\n(assuming the driver supports this; if not, separate authentication\nstep is skipped; this could end up being a separate \"connect\"\ncommand).\n\nThe initial implementation for mac80211 uses the current\nnet/mac80211/mlme.c for actual sending and processing of management\nframes and the new nl80211 commands will just stop the current state\nmachine from moving automatically from authentication to association.\nFuture cleanup may move more of the MLME operations into cfg80211.\n\nThe goal of this design is to provide more control of authentication and\nassociation process to user space without having to move the full MLME\nimplementation. This should be enough to allow IEEE 802.11r FT protocol\nand 802.11s SAE authentication to be implemented. Obviously, this will\nalso bring the extra benefit of not having to use WEXT for association\nrequests with mac80211. An example implementation of a user space SME\nusing the new nl80211 commands is available for wpa_supplicant.\n\nThis patch is enough to get IEEE 802.11r FT protocol working with\nover-the-air mechanism (over-the-DS will need additional MLME\nprimitives for handling the FT Action frames).\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6039f6d23fe792d615da5449e9fa1c6b43caacf6", "tree": "af94d1ad78ce1e82d76328ea9a67b351f0a9174b", "parents": [ "a299542e97ec1939fdca7db6d3d82c0aa9bf8b9a" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Thu Mar 19 13:39:21 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:02 2009 -0400" }, "message": "nl80211: Event notifications for MLME events\n\nAdd new nl80211 event notifications (and a new multicast group, \"mlme\")\nfor informing user space about received and processed Authentication,\n(Re)Association Response, Deauthentication, and Disassociation frames in\nstation and IBSS modes (i.e., MLME SAP interface primitives\nMLME-AUTHENTICATE.confirm, MLME-ASSOCIATE.confirm,\nMLME-REASSOCIATE.confirm, MLME-DEAUTHENTICATE.indicate, and\nMLME-DISASSOCIATE.indication). The event data is encapsulated as the 802.11\nmanagement frame since we already have the frame in that format and it\nincludes all the needed information.\n\nThis is the initial step in providing MLME SAP interface for\nauthentication and association with nl80211. In other words, kernel code\nwill act as the MLME and a user space application can control it as the\nSME.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7db90f4a25bd4184f3d36dfa4f512f53b0448da7", "tree": "839b8103801cac9342763e1b62e84730a8050ccc", "parents": [ "0fee54cab7d5ebc58fad8c6a0703c4ea016405e3" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Mon Mar 09 22:07:41 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 16 18:09:40 2009 -0400" }, "message": "cfg80211: move enum reg_set_by to nl80211.h\n\nWe do this so we can later inform userspace who set the\nregulatory domain and provide details of the request.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0fee54cab7d5ebc58fad8c6a0703c4ea016405e3", "tree": "907bc65b4dc54778f5c3281287d7610b73a4a95c", "parents": [ "1a28c78b46caec7628985728e7f0c4aef68e33e7" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Mon Mar 09 22:07:40 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 16 18:09:39 2009 -0400" }, "message": "cfg80211: remove REGDOM_SET_BY_INIT\n\nThis is not used as we can always just assume the first\nregulatory domain set will _always_ be a static regulatory\ndomain. REGDOM_SET_BY_CORE will be the first request from\ncfg80211 for a regdomain and that then populates the first\nregulatory request.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fe33eb390854886e1fd5d4835d833b80d145aafb", "tree": "5349c48092c9528b5640d5981425e161e0731ed3", "parents": [ "0441d6ffc705de17d85923264a1b03b71ebfccb8" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Sat Feb 21 00:04:30 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:52:57 2009 -0500" }, "message": "cfg80211: move all regulatory hints to workqueue\n\nAll regulatory hints (core, driver, userspace and 11d) are now processed in\na workqueue.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "806a9e39670be4f1f861c346ec102a79e81b90c3", "tree": "a83d6c06a1be211722385fd60433849db3a08625", "parents": [ "761cf7ecffc4bc079679e65c3b1ab107c1c1fb56" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Sat Feb 21 00:04:26 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:52:56 2009 -0500" }, "message": "cfg80211: make regulatory_request use wiphy_idx instead of wiphy\n\nWe do this so later on we can move the pending requests onto a\nworkqueue. By using the wiphy_idx instead of the wiphy we can\nlater easily check if the wiphy has disappeared or not.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4aa188e1a868d25c5b93e48e5d29bbd0f9d3bc3a", "tree": "3dc88e85c134c0cb44b4b24df886c4a5fe84848c", "parents": [ "77965c970d7da9c9b6349ff2b1d9adecf54c403b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Feb 18 19:32:08 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:52:42 2009 -0500" }, "message": "mac80211/cfg80211: move iwrange handler to cfg80211\n\nThe previous patch made cfg80211 generally aware of the signal\ntype a given hardware will give, so now it can implement\nSIOCGIWRANGE itself, removing more wext stuff from mac80211.\nMight need to be a little more parametrized once we have\nmore hardware using cfg80211 and new hardware capabilities.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "77965c970d7da9c9b6349ff2b1d9adecf54c403b", "tree": "bda8a85fa872a46d5cb5c48891cf3ee21c91e838", "parents": [ "630e64c487c0a9550f05b465216a1cd9125b52f2" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Feb 18 18:45:06 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:52:42 2009 -0500" }, "message": "cfg80211: clean up signal type\n\nIt wasn\u0027t a good idea to make the signal type a per-BSS option,\nalthough then it is closer to the actual value. Move it to be\na per-wiphy setting, update mac80211 to match.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "98c8a60a04316e94ccea8221cf16768ce91bd214", "tree": "c698e0526f7521bf0f7bd0122c0ee6a2ab08eb1c", "parents": [ "fdbf7335ea1a4048ff4818bf15bdcab1925dc6df" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Tue Feb 17 13:24:57 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:52:39 2009 -0500" }, "message": "nl80211: Provide access to STA TX/RX packet counters\n\nThe TX/RX packet counters are needed to fill in RADIUS Accounting\nattributes Acct-Output-Packets and Acct-Input-Packets. We already\ncollect the needed information, but only the TX/RX bytes were\npreviously exposed through nl80211. Allow applications to fetch the\npacket counters, too, to provide more complete support for accounting.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "70692ad2923a379e0a10f9ec2ad93fbbe084cc46", "tree": "f67488c396ea6e61f71e0199eea189ea939a698b", "parents": [ "83befbde839b1deb0cd752a834ffd9fde8571ae2" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Mon Feb 16 19:39:13 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:52:38 2009 -0500" }, "message": "nl80211: Optional IEs into scan request\n\nThis extends the NL80211_CMD_TRIGGER_SCAN command to allow applications\nto specify a set of information element(s) to be added into Probe\nRequest frames with NL80211_ATTR_IE. This provides support for the\nMLME-SCAN.request primitive parameter VendorSpecificInfo and can be\nused, e.g., to implement WPS scanning.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "79420f09e76e8e1dd1149d6ce9c20e06cbb5802a", "tree": "42adcb9fa34682629050778fa1c2b4d3382b6469", "parents": [ "d491af19db3adcc1eb1653e60a427fb4df36f361" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Feb 10 21:25:59 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 13 13:45:56 2009 -0500" }, "message": "cfg80211: add more flexible BSS lookup\n\nAdd a more flexible BSS lookup function so that mac80211 or\nother drivers can actually use this for getting the BSS to\nconnect to.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "d491af19db3adcc1eb1653e60a427fb4df36f361" }