)]}' { "log": [ { "commit": "cc755896a4274f11283bca32d1d658203844057a", "tree": "218970ece71df99f686b9416b7fd88b921690ebb", "parents": [ "d250fe91ae129bff0968e685cc9c466d3a5e3482", "9459d59fbf0bc82ff4c804679fa8bc22788eca63" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue May 11 14:24:55 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue May 11 14:24:55 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/ath/ar9170/main.c\n" }, { "commit": "0aaffa9b9699894aab3266195a529baf9f96ac29", "tree": "26fe5f5277ac6d7061ea723f92d4038b0c28b0b8", "parents": [ "f444de05d20e27cdd960c13fcbcfca3099f03143" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed May 05 15:28:27 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 07 14:55:51 2010 -0400" }, "message": "mac80211: improve HT channel handling\n\nCurrently, when one interface switches HT mode,\nall others will follow along. This is clearly\nundesirable, since the new one might switch to\nno-HT while another one is operating in HT.\n\nAddress this issue by keeping track of the HT\nmode per interface, and allowing only changes\nthat are compatible, i.e. switching into HT40+\nis not possible when another interface is in\nHT40-, in that case the second one needs to\nfall back to HT20.\n\nAlso, to allow drivers to know what\u0027s going on,\nstore the per-interface HT mode (channel type)\nin the virtual interface\u0027s bss_conf.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f444de05d20e27cdd960c13fcbcfca3099f03143", "tree": "a7fbef60420d88dda5840e06094be21ee3eb1dc0", "parents": [ "ac8dd506e40ee2c7fcc61654a44c32555a0a8d6c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed May 05 15:25:02 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 07 14:55:50 2010 -0400" }, "message": "cfg80211/mac80211: better channel handling\n\nCurrently (all tested with hwsim) you can do stupid\nthings like setting up an AP on a certain channel,\nthen adding another virtual interface and making\nthat associate on another channel -- this will make\nthe beaconing to move channel but obviously without\nthe necessary IEs data update.\n\nIn order to improve this situation, first make the\nconfiguration APIs (cfg80211 and nl80211) aware of\nmulti-channel operation -- we\u0027ll eventually need\nthat in the future anyway. There\u0027s one userland API\nchange and one API addition. The API change is that\nnow SET_WIPHY must be called with virtual interface\nindex rather than only wiphy index in order to take\neffect for that interface -- luckily all current\nusers (hostapd) do that. For monitor interfaces, the\nold setting is preserved, but monitors are always\nslaved to other devices anyway so no guarantees.\n\nThe second userland API change is the introduction\nof a per virtual interface SET_CHANNEL command, that\nhostapd should use going forward to make it easier\nto understand what\u0027s going on (it can automatically\ndetect a kernel with this command).\n\nOther than mac80211, no existing cfg80211 drivers\nare affected by this change because they only allow\na single virtual interface.\n\nmac80211, however, now needs to be aware that the\nchannel settings are per interface now, and needs\nto disallow (for now) real multi-channel operation,\nwhich is another important part of this patch.\n\nOne of the immediate benefits is that you can now\nstart hostapd to operate on a hardware that already\nhas a connection on another virtual interface, as\nlong as you specify the same channel.\n\nNote that two things are left unhandled (this is an\nimprovement -- not a complete fix):\n\n * different HT/no-HT modes\n\n currently you could start an HT AP and then\n connect to a non-HT network on the same channel\n which would configure the hardware for no HT;\n that can be fixed fairly easily\n\n * CSA\n\n An AP we\u0027re connected to on a virtual interface\n might indicate switching channels, and in that\n case we would follow it, regardless of how many\n other interfaces are operating; this requires\n more effort to fix but is pretty rare after all\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "83163244f845c296a118ce85c653872dbff6abfe", "tree": "ce2eac695a1c198f23d537e20ed86c16ece21f7e", "parents": [ "0a12761bcd5646691c5d16dd93df84d1b8849285", "adfba3c7c026a6a5560d2a43fefc9b198cb74462" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 05 16:14:16 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 05 16:14:16 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/libertas_tf/cmd.c\n\tdrivers/net/wireless/libertas_tf/main.c\n" }, { "commit": "195e294d21e88af879da4f88db2ceeb4ec28a755", "tree": "22a75db60cc8743888054460db85eb9a76b0cecb", "parents": [ "3a37495268ab45507b4cab9d4cb18c5496ab7a10" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Tue Apr 27 12:47:40 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 27 16:09:22 2010 -0400" }, "message": "mac80211: Determine dynamic PS timeout based on ps-qos network latency\n\nDetermine the dynamic PS timeout based on the configured ps-qos network\nlatency. For backwards wext compatibility, allow the dynamic PS timeout\nconfigured by the cfg80211 to overrule the automatically determined value.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7b7b5e56d7bdfdd0eb5ea13e6c9613b16b8eac46", "tree": "f0b5a17ac076f75fd90b784a3d7919f7a0b80515", "parents": [ "fd8aaaf3519f3fd3c82594e90bc6808072b94d54" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Apr 27 01:23:36 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 27 16:09:21 2010 -0400" }, "message": "mac80211: implement ap isolation support\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f7917af92024d43bc20bc1afc92de27b0bd0f50b", "tree": "3b88db453d8297cf44694c176ef7129234573bb9", "parents": [ "4f824719a2729f1a6bb78de20c4d3b3dbdd81a09" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Apr 27 00:26:34 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 27 16:09:16 2010 -0400" }, "message": "mac80211: fix handling of 4-address-mode in ieee80211_change_iface\n\nA misplaced interface type check bails out too early if the interface\nis not in monitor mode. This patch moves it to the right place, so that\nit only covers changes to the monitor flags.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3b51cc996e81d8a113416d8094fa4a88f8360a51", "tree": "e75b98b228bb4e456c30673fcc4b56ffa1d09cf5", "parents": [ "c68ed255265968c3948fa2678bf59d15c471b055", "672724403b42da1d276c6cf811e8e34d15efd964" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Apr 23 14:43:45 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Apr 23 14:43:45 2010 -0400" }, "message": "Merge branch \u0027master\u0027 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/ath/ath9k/phy.c\n\tdrivers/net/wireless/iwlwifi/iwl-6000.c\n\tdrivers/net/wireless/iwlwifi/iwl-debugfs.c\n" }, { "commit": "1289723ef238908ca8d95ff48a46ee0de970f882", "tree": "b4d584aee8abcc33dec2039fb45112156d3cd3d0", "parents": [ "03ceedea972a82d343fa5c2528b3952fa9e615d5" ], "author": { "name": "Holger Schurig", "email": "holgerschurig@gmail.com", "time": "Mon Apr 19 10:23:57 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 20 11:50:52 2010 -0400" }, "message": "mac80211: sample survey implementation for mac80211 \u0026 hwsim\n\nThis adds the survey function to both mac80211 itself and to mac80211_hwsim.\nFor the latter driver, we simply invent some noise level.A real driver which\ncannot determine the real channel noise MUST NOT report any noise, especially\nnot a magically conjured one :-)\n\nSigned-off-by: Holger Schurig \u003cholgerschurig@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5c01d5669356e13f0fb468944c1dd4c6a7e978ad", "tree": "fa43345288d7b25fac92b3b35360a177c4947313", "parents": [ "fea069152614cdeefba4b2bf80afcddb9c217fc8", "a5e944f1d955f3819503348426763e21e0413ba6" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 15 16:21:34 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 15 16:21:34 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tDocumentation/feature-removal-schedule.txt\n\tdrivers/net/wireless/ath/ath5k/phy.c\n\tdrivers/net/wireless/wl12xx/wl1271_main.c\n" }, { "commit": "871039f02f8ec4ab2e5e9010718caa8e085786f1", "tree": "f0d2b3127fc48c862967d68c46c2d46668137515", "parents": [ "e4077e018b5ead3de9951fc01d8bf12eeeeeefed", "4a1032faac94ebbf647460ae3e06fc21146eb280" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 11 14:53:53 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 11 14:53:53 2010 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/stmmac/stmmac_main.c\n\tdrivers/net/wireless/wl12xx/wl1271_cmd.c\n\tdrivers/net/wireless/wl12xx/wl1271_main.c\n\tdrivers/net/wireless/wl12xx/wl1271_spi.c\n\tnet/core/ethtool.c\n\tnet/mac80211/scan.c\n" }, { "commit": "17e4ec147f4939ca8c81b41b4261ec7974531381", "tree": "8066952a1dbef6656ac1f6d6a869326576b5006e", "parents": [ "32fbccafed7e935432b601f0453c2b702a385a25" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Mon Mar 29 23:28:30 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 31 14:46:42 2010 -0400" }, "message": "mac80211: Track Beacon signal strength and implement cqm events\n\nCalculate a running average of the signal strength reported for Beacon\nframes and indicate cqm events if the average value moves below or\nabove the configured threshold value (and filter out repetitive events\nwith by using the configured hysteresis).\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0af26b278bc1d747370b451595b7586cb7b3455c", "tree": "2e82d68e3c3f3f873cf855e7cec60de1759d7823", "parents": [ "e61146e36b40fd9d346118c40285913236c329f3" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Mon Mar 29 12:18:36 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 31 14:46:38 2010 -0400" }, "message": "mac80211: enable QoS explicitly in AP mode\n\nEnable QoS explicitly, when user space AP program will setup a QoS\nqueues. Currently this is not needed as iwlwifi not work in AP mode\nand no other driver implement enable/disable QoS.\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5a0e3ad6af8660be21ca98a971cd00f331318c05", "tree": "5bfb7be11a03176a87296a43ac6647975c00a1d1", "parents": [ "ed391f4ebf8f701d3566423ce8f17e614cde9806" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Wed Mar 24 17:04:11 2010 +0900" }, "committer": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Tue Mar 30 22:02:32 2010 +0900" }, "message": "include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h\n\npercpu.h is included by sched.h and module.h and thus ends up being\nincluded when building most .c files. percpu.h includes slab.h which\nin turn includes gfp.h making everything defined by the two files\nuniversally available and complicating inclusion dependencies.\n\npercpu.h -\u003e slab.h dependency is about to be removed. Prepare for\nthis change by updating users of gfp and slab facilities include those\nheaders directly instead of assuming availability. As this conversion\nneeds to touch large number of source files, the following script is\nused as the basis of conversion.\n\n http://userweb.kernel.org/~tj/misc/slabh-sweep.py\n\nThe script does the followings.\n\n* Scan files for gfp and slab usages and update includes such that\n only the necessary includes are there. ie. if only gfp is used,\n gfp.h, if slab is used, slab.h.\n\n* When the script inserts a new include, it looks at the include\n blocks and try to put the new include such that its order conforms\n to its surrounding. It\u0027s put in the include block which contains\n core kernel includes, in the same order that the rest are ordered -\n alphabetical, Christmas tree, rev-Xmas-tree or at the end if there\n doesn\u0027t seem to be any matching order.\n\n* If the script can\u0027t find a place to put a new include (mostly\n because the file doesn\u0027t have fitting include block), it prints out\n an error message indicating which .h file needs to be added to the\n file.\n\nThe conversion was done in the following steps.\n\n1. The initial automatic conversion of all .c files updated slightly\n over 4000 files, deleting around 700 includes and adding ~480 gfp.h\n and ~3000 slab.h inclusions. The script emitted errors for ~400\n files.\n\n2. Each error was manually checked. Some didn\u0027t need the inclusion,\n some needed manual addition while adding it to implementation .h or\n embedding .c file was more appropriate for others. This step added\n inclusions to around 150 files.\n\n3. The script was run again and the output was compared to the edits\n from #2 to make sure no file was left behind.\n\n4. Several build tests were done and a couple of problems were fixed.\n e.g. lib/decompress_*.c used malloc/free() wrappers around slab\n APIs requiring slab.h to be added manually.\n\n5. The script was run on all .h files but without automatically\n editing them as sprinkling gfp.h and slab.h inclusions around .h\n files could easily lead to inclusion dependency hell. Most gfp.h\n inclusion directives were ignored as stuff from gfp.h was usually\n wildly available and often used in preprocessor macros. Each\n slab.h inclusion directive was examined and added manually as\n necessary.\n\n6. percpu.h was updated not to include slab.h.\n\n7. Build test were done on the following configurations and failures\n were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my\n distributed build env didn\u0027t work with gcov compiles) and a few\n more options had to be turned off depending on archs to make things\n build (like ipr on powerpc/64 which failed due to missing writeq).\n\n * x86 and x86_64 UP and SMP allmodconfig and a custom test config.\n * powerpc and powerpc64 SMP allmodconfig\n * sparc and sparc64 SMP allmodconfig\n * ia64 SMP allmodconfig\n * s390 SMP allmodconfig\n * alpha SMP allmodconfig\n * um on x86_64 SMP allmodconfig\n\n8. percpu.h modifications were reverted so that it could be applied as\n a separate patch and serve as bisection point.\n\nGiven the fact that I had only a couple of failures from tests on step\n6, I\u0027m fairly confident about the coverage of this conversion patch.\nIf there is a breakage, it\u0027s likely to be something in one of the arch\nheaders which should be easily discoverable easily on most builds of\nthe specific arch.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nGuess-its-ok-by: Christoph Lameter \u003ccl@linux-foundation.org\u003e\nCc: Ingo Molnar \u003cmingo@redhat.com\u003e\nCc: Lee Schermerhorn \u003cLee.Schermerhorn@hp.com\u003e\n" }, { "commit": "a97c13c34509be460dea23c86f31c02daa2428b5", "tree": "eb5d2860af9d6f3121254f2ef262e197b10bed34", "parents": [ "d6dc1a386358979e12366d1f35eeb68fc181e101" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Tue Mar 23 09:02:34 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 24 16:04:33 2010 -0400" }, "message": "mac80211: Add support for connection quality monitoring\n\nAdd support for the set_cqm_config op. This op function configures the\nrequested connection quality monitor rssi threshold and rssi hysteresis\nvalues to the hardware if the hardware supports\nIEEE80211_HW_SUPPORTS_CQM.\n\nFor unsupported hardware, currently -EOPNOTSUPP is returned, so the mac80211\nis currently not doing connection quality monitoring on the host. This could be\nadded later, if needed.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "026331c4d9b526561ea96f95fac4bfc52b69e316", "tree": "a82b0a92a7f03a1d151a9db123320689c73d98c7", "parents": [ "8404080568613d93ad7cf0a16dfb68459b42a264" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Mon Feb 15 12:53:10 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 15 16:14:15 2010 -0500" }, "message": "cfg80211/mac80211: allow registering for and sending action frames\n\nThis implements a new command to register for action frames\nthat userspace wants to handle instead of the in-kernel\nrejection. It is then responsible for rejecting ones that\nit decided not to handle. There is no unregistration, but\nthe socket can be closed for that.\n\nFrames that are not registered for will not be forwarded\nto userspace and will be rejected by the kernel, the\ncfg80211 API helps implementing that.\n\nAdditionally, this patch adds a new command that allows\ndoing action frame transmission from userspace. It can be\nused either to exchange action frames on the current\noperational channel (e.g., with the AP with which we are\ncurrently associated) or to exchange off-channel Public\nAction frames with the remain-on-channel command.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "19885c4fbd79439efd6b3798bfb73f2f30e27104", "tree": "ee15587e44a35885d7b77a698bc07dd0263fec62", "parents": [ "199d69f27326858b16449eb1cc1623299db64415" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Feb 05 11:45:06 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 08 16:50:57 2010 -0500" }, "message": "mac80211: fix bss_conf.dtim_period\n\nIn AP mode, the only mode where the parameter\nis supposed to be valid, we never assign it!\nFix that to allow drivers to avoid parsing\nthe TIM IE for the value.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "34e895075e21be3e21e71d6317440d1ee7969ad0", "tree": "217fe70e32e54ef0134f477510472f3992655d79", "parents": [ "070bb5477fb4029131aad4941d7aaf0093db0c38" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Feb 03 13:59:58 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 08 16:50:53 2010 -0500" }, "message": "mac80211: allow station add/remove to sleep\n\nMany drivers would like to sleep during station\naddition and removal, and currently have a high\ncomplexity there from not being able to.\n\nThis introduces two new callbacks sta_add() and\nsta_remove() that drivers can implement instead\nof using sta_notify() and that can sleep, and\nthe new sta_add() callback is also allowed to\nfail.\n\nThe reason we didn\u0027t do this previously is that\nthe IBSS code wants to insert stations from the\nRX path, which is a tasklet, so cannot sleep.\nThis patch will keep the station allocation in\nthat path, but moves adding the station to the\ndriver out of line. Since the addition can now\nfail, we can have IBSS peer structs the driver\nrejected -- in that case we still talk to the\nstation but never tell the driver about it in\nthe control.sta pointer. If there will ever be\na driver that has a low limit on the number of\nstations and that cannot talk to any stations\nthat are not known to it, we need to do come up\nwith a new strategy of handling larger IBSSs,\nmaybe quicker expiry or rejecting peers.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "031cf0e94c9c8302a4592707939d6c2039f17f28", "tree": "02f3f0d3f89f03217bdb83530af30a95c9ab6191", "parents": [ "730dd70549e0ec755dd55615ba5cfc38a482a947", "ad580db50ee8dccd069ffcd76d6f70fa6d4a62a8" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 19 15:58:41 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 19 15:58:41 2010 -0500" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "43d3534344bbdcfa9c61a6b38490cd4cbb2f6bb6", "tree": "66b87eb3d8c1751af37cf66afde977bb100db4a8", "parents": [ "84920e3e47f654a22b540606fb8c1ab90b870942" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Fri Jan 15 03:00:48 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 15 17:02:07 2010 -0500" }, "message": "mac80211: force use_short_slot\u003dtrue for 5GHz\n\nNormally 5GHz does not have a concept of long vs short slot time,\nhowever the slot time that it ends up using is the same as for 2.4 GHZ\nand use_short_slot \u003d\u003d true\nBecause of that, it makes more sense to force use_short_slot \u003d true\nwhenever 5 GHz is being used, so that this particular check does not\nhave to be in every single driver that uses this flag.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e5de30c9bf4a39db9f54c4a373470ce65881ade0", "tree": "9eaa6e67bdf770ccf6c98497f3a2dec2778fa4db", "parents": [ "5f6120335c701ba07d5151206071f4d6ccaa684f" ], "author": { "name": "Benoit Papillault", "email": "benoit.papillault@free.fr", "time": "Fri Jan 15 12:21:37 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 15 16:20:22 2010 -0500" }, "message": "mac80211: check that ieee80211_set_power_mgmt only handles STA interfaces.\n\nieee80211_set_power_mgmt is meant for STA interfaces only. Moreover,\nsince sdata-\u003eu.mgd.mtx is only initialized for STA interfaces, using\nthis code for any other type of interface (like creating a monitor\ninterface) will result in a oops.\n\nCc: stable@kernel.org\nSigned-off-by: Benoit Papillault \u003cbenoit.papillault@free.fr\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ab13315af97919fae0e014748105fdc2e30afb2d", "tree": "befa549272ecff20b2839bd6671e4cccbce448f9", "parents": [ "2d46d7c121436f1dafe91b0a8d9b99e534cfa5f8" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Tue Jan 12 10:42:31 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 14:20:58 2010 -0500" }, "message": "mac80211: add U-APSD client support\n\nAdd Unscheduled Automatic Power-Save Delivery (U-APSD) client support. The\nidea is that the data frames from the client trigger AP to send the buffered\nframes with ACs which have U-APSD enabled. This decreases latency and makes it\npossible to save even more power.\n\nDriver needs to use IEEE80211_HW_UAPSD to enable the feature. The current\nimplementation assumes that firmware takes care of the wakeup and\nhardware needing IEEE80211_HW_PS_NULLFUNC_STACK is not yet supported.\n\nTested with wl1251 on a Nokia N900 and Cisco Aironet 1231G AP and running\nvarious test traffic with ping.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0e5ded5a87c097760abd68521b86f1025dedc7d7", "tree": "8df46ae5bb0a32c69127bc3b1c92245a6ca98be2", "parents": [ "d524215f6cad245249df8def19125ae6fd0bcc9b" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Fri Jan 08 18:10:58 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 14:02:07 2010 -0500" }, "message": "mac80211: allow station updates on ap interfaces for vlan stations\n\nSince the per-vif station changes, sta_info_get on the ap sdata no\nlonger returns entries for stations on ap vlans. This causes issues\nwith hostapd, which currently always passes the ap interface name to\nnl80211 calls. This patch provides bug compatibility with the earlier\nversions until hostapd is fixed.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "37eb0b164cf9fa9f70c8500926f5cde7c652f48e", "tree": "9260e7045f32268c8c4ded718677711d371cd5ed", "parents": [ "e00cfce0cb2a397859607bf515c6de9ce064b64a" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed Jan 06 13:09:08 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:50:11 2010 -0500" }, "message": "cfg80211/mac80211: Use more generic bitrate mask for rate control\n\nExtend struct cfg80211_bitrate_mask to actually use a bitfield mask\ninstead of just a single fixed or maximum rate index. This change\nitself does not modify the behavior (except for debugfs files), but it\nprepares cfg80211 and mac80211 for a new nl80211 command for setting\nwhich rates can be used in TX rate control.\n\nSince frames are now going through the rate control algorithm\nunconditionally, the internal IEEE80211_TX_INTFL_RCALGO flag can now\nbe removed. The RC implementations can use the rate_idx_mask value to\noptimize their behavior if only a single rate is enabled.\n\nThe old max_rate_idx in struct ieee80211_tx_rate_control is maintained\n(but commented as deprecated) for backwards compatibility with existing\nRC implementations. Once these implementations have been updated to\nuse the more generic rate_idx_mask, the max_rate_idx value can be\nremoved.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "310bc676e314e92c18257bfc916951879451ee32", "tree": "12050b5b473b8c9a1bf67450e03d45ade2a4b219", "parents": [ "81077e82c3f591578625805dd6464a27a9ff56ec" ], "author": { "name": "Lukáš Turek", "email": "8an@praha12.net", "time": "Mon Dec 21 22:50:48 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:50:07 2010 -0500" }, "message": "mac80211: Add new callback set_coverage_class\n\nMac80211 callback to driver set_coverage_class() sets slot time and ACK\ntimeout for given IEEE 802.11 coverage class. The callback is optional,\nbut it\u0027s essential for long distance links.\n\nSigned-off-by: Lukas Turek \u003c8an@praha12.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b8bc4b0aa9bfba755c64b11b8f60e6cfab25dc9d", "tree": "7f95b0c7d4f847e3c624b67899c7a62f6b73ce26", "parents": [ "9588bbd5529461a3dacd435bf239c84c3508f569" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 23 13:15:42 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:55:03 2009 -0500" }, "message": "mac80211: support remain-on-channel command\n\nThis implements the new remain-on-channel cfg80211\ncommand in mac80211, extending the work interface.\n\nAlso change the work purge code to be able to clean\nup events properly (pretending they timed out.)\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0c1ad2cac1cb54db38fd4cc1822965071ee83f6e", "tree": "d5af632483584b7579ad8b24ba870f9b18e1aaa7", "parents": [ "8e664fb3fd2b04e3ac5fad7f046000ba54e0e275" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 23 13:15:39 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:54:59 2009 -0500" }, "message": "mac80211: proper bss private data handling\n\ncfg80211 offers private data for each BSS struct,\nwhich mac80211 uses. However, mac80211 uses internal\nand external (cfg80211) BSS pointers interchangeably\nand has a hack to put the cfg80211 bss struct into\nthe private struct.\n\nRemove this hack, properly converting between the\npointers wherever necessary.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9607e6b66a0d25ca63b70d54a4283fa13d8f7c9d", "tree": "706cb2c2db2df69fa446eb3848b27107b67f2d25", "parents": [ "d30506e0357e5448c7d38bb3739c451dbe4c174e" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 23 13:15:31 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:54:49 2009 -0500" }, "message": "mac80211: add ieee80211_sdata_running\n\nInstead of always using netif_running(sdata-\u003edev)\nuse ieee80211_sdata_running(sdata) now which is\njust an inline containing netif_running() for now.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea1e4b842049fcc4741096538114871a74859314", "tree": "c2336ab480ac0fd62e0dc41b391d99c97158dc9c", "parents": [ "b6ce5c33001b1dc83e6a1a6f30c5dccccea651b6", "92c6f8d849178582fc527aaf1e51dd37a74767d3" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 15:09:11 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 15:09:11 2009 -0500" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "2c7e6bc9ac7cb518cf037495932d80f71a1596f2", "tree": "99a83d89eccb9dc9d1f3cf2d2e628812f83b7671", "parents": [ "d80050c4c321a74cea28c6ef9695d8427a928417" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Dec 04 09:26:38 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 22 13:46:28 2009 -0500" }, "message": "mac80211: disallow fixing bitrates with hw rate control\n\nWhen hw rate control is used, these parameters have\nno meaning because the hardware cannot get at them\nright now, so disallow setting them. Also clean up\nthe function a bit.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0f78231bffb868a30e8533aace142213266bb811", "tree": "317f65dc6d89e9a89ad83f94fadd780dd1e0ca83", "parents": [ "18974b5b0b5e758d416c550553b143e5c8038281" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Dec 01 13:37:02 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 22 13:31:16 2009 -0500" }, "message": "mac80211: enable spatial multiplexing powersave\n\nEnable spatial multiplexing in mac80211 by telling the\ndriver what to do and, where necessary, sending action\nframes to the AP to update the requested SMPS mode.\n\nAlso includes a trivial implementation for hwsim that\njust logs the requested mode.\n\nFor now, the userspace interface is in debugfs only,\nand let you toggle the requested mode at any time.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "47846c9b0c10808d9337d2e7d09361f3e0a0a71a", "tree": "8e5d0dbf3309b7868fa73a888f9561ffea1580e3", "parents": [ "abe60632f311d515b082b450504ee24006023951" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Nov 25 17:46:19 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 21 18:38:52 2009 -0500" }, "message": "mac80211: reduce reliance on netdev\n\nFor bluetooth 3, we will most likely not have\na netdev for a virtual interface (sdata), so\nprepare for that by reducing the reliance on\nhaving a netdev. This patch moves the name\nand address fields into the sdata struct and\nuses them from there all over. Some work is\nneeded to keep them sync\u0027ed, but that\u0027s not\na lot of work and in slow paths anyway.\n\nIn doing so, this also reduces the number of\npointer dereferences in many places, because\nof things like sdata-\u003edev-\u003edev_addr becoming\nsdata-\u003evif.addr.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "abe60632f311d515b082b450504ee24006023951", "tree": "a51fc3b135fa8a31cc0d7953be43502ecc6433c6", "parents": [ "15920d8afc87861672e16fa95ae2764b065d6dd3" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Nov 25 17:46:18 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 21 18:38:51 2009 -0500" }, "message": "mac80211: make station management completely depend on vif\n\nThe station management currently uses the virtual\ninterface, but you cannot add the same station to\nmultiple virtual interfaces if you\u0027re communicating\nwith it in multiple ways.\n\nThis restriction should be lifted so that in the\nfuture we can, for instance, support bluetooth 3\nwith an access point that mac80211 is already\nassociated to.\n\nWe can do that by requiring all sta_info_get users\nto provide the virtual interface and making the RX\ncode aware that an address may match more than one\nstation struct. Thanks to the previous patches this\none isn\u0027t all that large and except for the RX and\nTX status paths changes has low complexity.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "19deffbeba930030cfaf000b920333c6ba99ad52", "tree": "3d014a0815c83124d428f68bc4135e13a873cbdc", "parents": [ "d55fb891f9da8ee17374349ff482b2715623b7e5" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 08 17:10:13 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 09 15:10:08 2009 -0500" }, "message": "wireless: correctly report signal value for IEEE80211_HW_SIGNAL_UNSPEC\n\nThis part was missed in \"cfg80211: implement get_wireless_stats\",\nprobably because sta_set_sinfo already existed and was only handling\ndBm signals.\n\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3305443c968b98902199bea0abbd9443c6a2bb8d", "tree": "9a31f5c76c76f97c5d959b4a75a84de2ebf693be", "parents": [ "f1cf2dbd0f798b71b1590e7aca6647f2caef1649" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Nov 20 10:09:14 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 23 17:05:29 2009 -0500" }, "message": "mac80211: fix rcu locking\n\nAdd a missing rcu_read_unlock() before jumping out\nof the ieee80211_change_station() function in the\nerror case.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9bc383de37090ba7ca3ff32a12c9d809dc5867f0", "tree": "2b502b918f585427b45357e5a9a781ea9f06c263", "parents": [ "5be83de54c16944dea9c16c6a5a53c1fa75ed304" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Nov 19 11:55:19 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 19 11:08:53 2009 -0500" }, "message": "cfg80211: introduce capability for 4addr mode\n\nIt\u0027s very likely that not many devices will support\nfour-address mode in station or AP mode so introduce\ncapability bits for both modes, set them in mac80211\nand check them when userspace tries to use the mode.\nAlso, keep track of 4addr in cfg80211 (wireless_dev)\nand not in mac80211 any more. mac80211 can also be\nimproved for the VLAN case by not looking at the\n4addr flag but maintaining the station pointer for\nit correctly. However, keep track of use_4addr for\nstation mode in mac80211 to avoid all the derefs.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3b53fde8ac40c4321389def14d7f4a9e14092fd3", "tree": "705a81684a9326764c53fa7a9a85e337f87cb15e", "parents": [ "cb53a150caa3068ce366b75dd354718145f5e893" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Nov 16 12:00:37 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 18 17:09:14 2009 -0500" }, "message": "mac80211: let sta_info_get_by_idx get sta by sdata\n\nInstead of filtering by device, directly look up by sdata.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "63c5723bc3af8d4e86984dd4ff0c78218de418d0", "tree": "fe900ef2a92377c49c6b3124bb5741a1ac04d436", "parents": [ "e304bfd30f356f7b75d30cad0029ecca705fd590" ], "author": { "name": "Rui Paulo", "email": "rpaulo@gmail.com", "time": "Mon Nov 09 23:46:57 2009 +0000" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:57 2009 -0500" }, "message": "mac80211: add nl80211/cfg80211 handling of the new mesh root mode option.\n\nSigned-off-by: Rui Paulo \u003crpaulo@gmail.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nReviewed-by: Andrey Yurovsky \u003candrey@cozybit.com\u003e\nTested-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d19b3bf6384e66ac6e11a61ee31ed2cfe149f4d8", "tree": "2ec825639458dafddecc7e3d0f83afff9cff0cfa", "parents": [ "be125c60e46e165fbfe33db36a4a9d943d560a5b" ], "author": { "name": "Rui Paulo", "email": "rpaulo@gmail.com", "time": "Mon Nov 09 23:46:55 2009 +0000" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:56 2009 -0500" }, "message": "mac80211: replace \"destination\" with \"target\" to follow the spec\n\nResulting object files have the same MD5 as before.\n\nSigned-off-by: Rui Paulo \u003crpaulo@gmail.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nReviewed-by: Andrey Yurovsky \u003candrey@cozybit.com\u003e\nTested-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f14543ee4d0681df1377b976cba704557ba220d3", "tree": "f148485869f6638030207c069742c1918647be6a", "parents": [ "8b787643ca0a5130c647109d77fe512f89cfa611" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Nov 10 20:10:05 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 11 17:02:10 2009 -0500" }, "message": "mac80211: implement support for 4-address frames for AP and client mode\n\nIn some situations it might be useful to run a network with an\nAccess Point and multiple clients, but with each client bridged\nto a network behind it. For this to work, both the client and the\nAP need to transmit 4-address frames, containing both source and\ndestination MAC addresses.\nWith this patch, you can configure a client to communicate using\nonly 4-address frames for data traffic.\nOn the AP side you can enable 4-address frames for individual\nclients by isolating them in separate AP VLANs which are configured\nin 4-address mode.\nSuch an AP VLAN will be limited to one client only, and this client\nwill be used as the destination for all traffic on its interface,\nregardless of the destination MAC address in the packet headers.\nThe advantage of this mode compared to regular WDS mode is that it\u0027s\neasier to configure and does not require a static list of peer MAC\naddresses on any side.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f6d773cd4f3c18c40ab25a5cb92453756237840e", "tree": "5631a6ea4495ae2eb5058fb63b25dea3b197d61b", "parents": [ "d0e1e88d6e7dbd8e1661cb6a058ca30f54ee39e4", "bcb628d579a61d0ab0cac4c6cc8a403de5254920" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 09 11:17:24 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 09 11:17:24 2009 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "c1f9a764cf47686b1f5a0cf87ada68d90056136a", "tree": "77bff7f1361deb11e1b3c60470d9d5784c00a771", "parents": [ "7400f42e9d765fa0656b432f3ab1245f9710f190" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Nov 01 19:25:40 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 02 15:14:07 2009 -0500" }, "message": "mac80211: check interface is down before type change\n\nFor some strange reason the netif_running() check\nended up after the actual type change instead of\nbefore, potentially causing all kinds of problems\nif the interface is up while changing the type;\none of the problems manifests itself as a warning:\n\nWARNING: at net/mac80211/iface.c:651 ieee80211_teardown_sdata+0xda/0x1a0 [mac80211]()\nHardware name: Aspire one\nPid: 2596, comm: wpa_supplicant Tainted: G W 2.6.31-10-generic #32-Ubuntu\nCall Trace:\n [] warn_slowpath_common+0x6d/0xa0\n [] warn_slowpath_null+0x15/0x20\n [] ieee80211_teardown_sdata+0xda/0x1a0 [mac80211]\n [] ieee80211_if_change_type+0x4a/0xc0 [mac80211]\n [] ieee80211_change_iface+0x61/0xa0 [mac80211]\n [] cfg80211_wext_siwmode+0xc7/0x120 [cfg80211]\n [] ioctl_standard_call+0x58/0xf0\n\n(http://www.kerneloops.org/searchweek.php?search\u003dieee80211_teardown_sdata)\n\nCc: Arjan van de Ven \u003carjan@infradead.org\u003e\nCc: stable@kernel.org\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e6e898cfea5f35d64f850277e7fa295c386cf953", "tree": "96cb3441896011d1f797607a5e68432c9d16442d", "parents": [ "ff9458d3ec179831ebe6966a8aa014ccb3907dc6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Oct 30 15:48:43 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 30 16:50:40 2009 -0400" }, "message": "mac80211: remove bogus code\n\nIt\u0027s not right to do something here when returning an\nerror, and hostapd should never have relied on it as\nit only fixes up a small part of the problem anyway.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f5ea9120be2e5d5c846243416cfdce01d02f5836", "tree": "cade27e47a90dde79a523598b96a2ebb50770d2f", "parents": [ "f401a6f7ede753e56b84025e7d2db0d5ef560ce6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Aug 07 16:17:38 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 14 09:13:43 2009 -0400" }, "message": "nl80211: add generation number to all dumps\n\nIn order for userspace to be able to figure out whether\nit obtained a consistent snapshot of data or not when\nusing netlink dumps, we need to have a generation number\nin each dump message that indicates whether the list has\nchanged or not -- its value is arbitrary.\n\nThis patch adds such a number to all dumps, this needs\nsome mac80211 involvement to keep track of a generation\nnumber to start with when adding/removing mesh paths or\nstations.\n\nThe wiphy and netdev lists can be fully handled within\ncfg80211, of course, but generation numbers need to be\nstored there as well.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "463d018323851a608eef52a9427b0585005c647f", "tree": "b5ad2ee6115e6b780c264022cbc20b36d22fe80c", "parents": [ "5061b0c2b9066de426fbc63f1278d2210e789412" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 14 00:33:35 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 27 15:24:07 2009 -0400" }, "message": "cfg80211: make aware of net namespaces\n\nIn order to make cfg80211/nl80211 aware of network namespaces,\nwe have to do the following things:\n\n * del_virtual_intf method takes an interface index rather\n than a netdev pointer - simply change this\n\n * nl80211 uses init_net a lot, it changes to use the sender\u0027s\n network namespace\n\n * scan requests use the interface index, hold a netdev pointer\n and reference instead\n\n * we want a wiphy and its associated virtual interfaces to be\n in one netns together, so\n - we need to be able to change ns for a given interface, so\n export dev_change_net_namespace()\n - for each virtual interface set the NETIF_F_NETNS_LOCAL\n flag, and clear that flag only when the wiphy changes ns,\n to disallow breaking this invariant\n\n * when a network namespace goes away, we need to reparent the\n wiphy to init_net\n\n * cfg80211 users that support creating virtual interfaces must\n create them in the wiphy\u0027s namespace, currently this affects\n only mac80211\n\nThe end result is that you can now switch an entire wiphy into\na different network namespace with the new command\n\tiw phy#\u003cidx\u003e set netns \u003cpid\u003e\nand all virtual interfaces will follow (or the operation fails).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "99783e2cde6eccbd31efeb03a79f26bb5f239c36", "tree": "ca3e4849ccd3e297c28ab92c5c9d0b981a08853a", "parents": [ "74d154189d597b91da4322996dbf4f5c3d1544ab" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 07 03:54:43 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 24 15:05:01 2009 -0400" }, "message": "mac80211: fix sparse warning\n\nieee80211_testmode_cmd can very well be static.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "667503ddcb96f3b10211f997fe55907fa7509841", "tree": "5e2559e94a716bb81bfc7566e3e3a05267810c31", "parents": [ "4f5dadcebb55fccef34722bbbf6401d39124c8a4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 07 03:56:11 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:02:32 2009 -0400" }, "message": "cfg80211: fix locking\n\nOver time, a lot of locking issues have crept into\nthe smarts of cfg80211, so e.g. scan completion can\nrace against a new scan, IBSS join can race against\nleaving an IBSS, etc.\n\nIntroduce a new per-interface lock that protects\nmost of the per-interface data that we need to keep\ntrack of, and sprinkle assertions about that lock\neverywhere. Some things now need to be offloaded to\nwork structs so that we don\u0027t require being able to\nsleep in functions the drivers call. The exception\nto that are the MLME callbacks (rx_auth etc.) that\ncurrently only mac80211 calls because it was easier\nto do that there instead of in cfg80211, and future\ndrivers implementing those calls will, if they ever\nexist, probably need to use a similar scheme like\nmac80211 anyway...\n\nIn order to be able to handle _deauth and _disassoc\nproperly, introduce a cookie passed to it that will\ndetermine locking requirements.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "77fdaa12cea26c204cc12c312fe40bc0f3dcdfd8", "tree": "c28fdd28f2ca2783783adb4b5e13b7ba57a223a3", "parents": [ "a7c1cfc9616ee76213a6d4fd4c17f13fdc92ddce" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 07 03:45:17 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:02:30 2009 -0400" }, "message": "mac80211: rework MLME for multiple authentications\n\nSit tight. This shakes up the world as you know\nit. Let go of your spaghetti tongs, they will no\nlonger be required, the horrible statemachine in\nnet/mac80211/mlme.c is no more...\n\nWith the cfg80211 SME mac80211 now has much less\nto keep track of, but, on the other hand, for FT\nit needs to be able to keep track of at least one\nauthentication being in progress while associated.\nSo convert from a single state machine to having\nsmall ones for all the different things we need to\ndo. For real FT it will still need work wrt. PS,\nbut this should be a good step.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3e5d7649a64e558e4146ddfad4dfcf13fc65dd47", "tree": "fa51725ca07cf682e6694ba5f107d8614d9f0972", "parents": [ "2ffa5fede379091bf62a732462b829e4b51af054" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 07 14:37:26 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:02:30 2009 -0400" }, "message": "cfg80211: let SME control reassociation vs. association\n\nSince we don\u0027t really know that well in the kernel,\nlet\u0027s let the SME control whether it wants to use\nreassociation or not, by allowing it to give the\nprevious BSSID in the associate() parameters.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "19957bb399e2722719c0e20c9ae91cf8b6aaff04", "tree": "9c4d53fe5938ceee41333a1afd5be0ed5c1ce313", "parents": [ "517357c685ccc4b5783cc7dbdae8824ada19a97f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jul 02 17:20:43 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:53 2009 -0400" }, "message": "cfg80211: keep track of BSSes\n\nIn order to avoid problems with BSS structs going away\nwhile they\u0027re in use, I\u0027ve long wanted to make cfg80211\nkeep track of them. Without the SME, that wasn\u0027t doable\nbut now that we have the SME we can do this too. It can\nkeep track of up to four separate authentications and\none association, regardless of whether it\u0027s controlled\nby the cfg80211 SME or the userspace SME.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ab1faead50d09165b58c2854997c7205ca9c0d22", "tree": "6eb456e24aab52cdd9ed152d09008635a1ebd555", "parents": [ "6dc1cb0319997648f59b0f46b9e093e779f0353d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:41:17 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:53 2009 -0400" }, "message": "mac80211: remove dead code, clean up\n\nWith mac80211 now always controlled by an external SME,\na lot of code is dead -- SSID, BSSID, channel selection\nis always done externally, etc. Additionally, rename\nIEEE80211_STA_TKIP_WEP_USED to IEEE80211_STA_DISABLE_11N\nand clean up the code a bit.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6dc1cb0319997648f59b0f46b9e093e779f0353d", "tree": "79bb836ba724a77ac200e5b11d3930adb92bb25d", "parents": [ "ac00326e9d1d46bf48e9cf60cf892a96b885601a" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:40:45 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:52 2009 -0400" }, "message": "mac80211: remove auth algorithm retry\n\nThe automatic auth algorithm issue is now solved in\ncfg80211, so mac80211 no longer needs code to try\ndifferent algorithms -- just using whatever cfg80211\nasked for is good.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ac00326e9d1d46bf48e9cf60cf892a96b885601a", "tree": "74f40185b7b7c39b0a5a112111613007e2af998c", "parents": [ "8990646d2fafeacfacba4a4b1073a4216662089a" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:27:01 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:52 2009 -0400" }, "message": "mac80211: re-add HT disabling\n\nThe IEEE80211_STA_TKIP_WEP_USED flag is used internally to\ndisable HT when WEP or TKIP are used. Now that cfg80211 is\ngiving us the required information, we can set the flag\nappropriately again.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9930380f0bd8405fa6a51d644f3de88c30666519", "tree": "71cd68830b11b648d6b79f1575dc9960631a2ab2", "parents": [ "ab737a4f7dbe57b12b73f482a7b973bf00b41942" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:59 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:52 2009 -0400" }, "message": "cfg80211: implement IWRATE\n\nFor now, let\u0027s implement that using a very hackish way:\nsimply mirror the wext API in the cfg80211 API. This\nwill have to be changed later when we implement proper\nbitrate API.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ab737a4f7dbe57b12b73f482a7b973bf00b41942", "tree": "33f3c44073921b9fa4c96ea5501dbfcad59567ac", "parents": [ "bc92afd92088ab41223383cc6863ab4792533c54" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:58 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:52 2009 -0400" }, "message": "cfg80211: implement IWAP for WDS\n\nThis implements siocsiwap/giwap for WDS mode.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bc92afd92088ab41223383cc6863ab4792533c54", "tree": "a31d14843f5a63a4a4561bb2ac59e83f4550433c", "parents": [ "f21293549f60f88c74fcb9944737f11048896dc4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:57 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:51 2009 -0400" }, "message": "cfg80211: implement iwpower\n\nJust on/off and timeout, and with a hacky cfg80211 method\nuntil we figure out what we want, though this is probably\nsufficient as we want to use pm_qos for wifi everywhere.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b23aa676ab9d54469cda9f7151f51a2851c6f36e", "tree": "dd4af5fa38dbfec362ded1d655ed584bbcf60a53", "parents": [ "6a669e65c5ec393a650362874e13f7d3365a7827" ], "author": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Wed Jul 01 21:26:54 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:51 2009 -0400" }, "message": "cfg80211: connect/disconnect API\n\nThis patch introduces the cfg80211 connect/disconnect API.\nThe goal here is to run the AUTH and ASSOC steps in one call.\nThis is needed for some fullmac cards that run both steps\ndirectly from the target, after the host driver sends a\nconnect command.\n\nAdditionally, all the new crypto parameters for connect()\nare now also valid for associate() -- although associate\nrequires the IEs to be used, the information can be useful\nfor drivers and should be given.\n\nSigned-off-by: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "aff89a9b9084931e51b89d8f3ee3c547bea6c422", "tree": "592c1dfa2ef994a1b3e117b3d7bc1cc7b7bde637", "parents": [ "5121ea0481f9cea1dfd958f18d7b4ac78778cd40" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 01 21:26:51 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 15:01:50 2009 -0400" }, "message": "cfg80211: introduce nl80211 testmode command\n\nThis introduces a new NL80211_CMD_TESTMODE for testing\nand calibration use with nl80211. There\u0027s no multiplexing\nlike like iwpriv had, and the command is not available by\ndefault, it needs to be explicitly enabled in Kconfig and\nshouldn\u0027t be enabled in most kernels.\n\nThe command requires a wiphy index or interface index to\nidentify the device to operate on, and the new TESTDATA\nattribute. There also is API for sending replies to the\ncommand, and testmode multicast messages (on a testmode\nmulticast group).\n\nI\u0027ve also updated mac80211 to be able to pass through the\ncommand to the driver, since it itself doesn\u0027t implement\nthe testmode command.\n\nAdditionally, to give people an idea of how to use the\ncommand, I\u0027ve added a little code to hwsim that makes use\nof the new command to set the powersave mode, this is\ncurrently done via debugfs and should remain there, and\nthe testmode command only serves as an example of how to\nuse this best -- with nested netlink attributes in the\nTESTDATA attribute. A hwsim testmode tool can be found at\nhttp://git.sipsolutions.net/hwsim.git/. This tool is BSD\nlicensed so people can easily use it as a basis for their\nown internal fabrication and validation tools.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e36d56b64808aec54b68b4e9976180c1da0933b2", "tree": "93f0e696d077b58d1064f3321d52b4611addf104", "parents": [ "e5a8a896f5180f2950695d2d0b79db348d200ca4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jun 09 21:04:43 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 10 14:57:38 2009 -0400" }, "message": "cfg80211: pass netdev to change_virtual_intf\n\nIf there was a reason I\u0027m passing the ifidx I cannot\nremember it any more and don\u0027t see one now, so let\u0027s\njust pass the pointer itself.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0bffe40f21e2ddc5215b1faec4e8dbbc215e7d4d", "tree": "48d1de44f8f8aa155713ff38f038ec35326d27bf", "parents": [ "5eae6592e9bdc989151171828ee97e0ad9e1b1ac" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jun 09 16:18:32 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 10 13:28:39 2009 -0400" }, "message": "mac80211: don\u0027t use master netdev name\n\nAlways use the wiphy name instead.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1f87f7d3a3b42b20f34cb03f0fd1a41c3d0e27f3", "tree": "642882153a48e910a415e6bb23bcfb79fadef6dd", "parents": [ "6081162e2ed78dfcf149b076b047078ab1445cc2" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jun 02 13:01:41 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 03 14:06:14 2009 -0400" }, "message": "cfg80211: add rfkill support\n\nTo be easier on drivers and users, have cfg80211 register an\nrfkill structure that drivers can access. When soft-killed,\nsimply take down all interfaces; when hard-killed the driver\nneeds to notify us and we will take down the interfaces\nafter the fact. While rfkilled, interfaces cannot be set UP.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7643a2c3fcc13cd6fbd731f214463547383418ae", "tree": "e2e41315f0d38a8627456303820b5c1c2a9b54a6", "parents": [ "c64fb01627e24725d1f9d535e4426475a4415753" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jun 02 13:01:39 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 03 14:06:14 2009 -0400" }, "message": "cfg80211: move txpower wext from mac80211\n\nThis patch introduces new cfg80211 API to set the TX power\nvia cfg80211, puts the wext code into cfg80211 and updates\nmac80211 to use all that. The -ENETDOWN bits are a hack but\nwill go away soon.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "86ab04c8c1df51df7d6d3709da546e0163ac856b", "tree": "a9683cc31ed8b7f40b2ea8a066ef8619f37ee777", "parents": [ "2c5b9e511fee1a856ffe6332e15c72a20d2c72f6" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed May 27 22:56:05 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 03 14:05:11 2009 -0400" }, "message": "mac80211: handle -EALREADY on cfg80211 op assoc req\n\nWhen the SME requests to associate to an open AP\nieee80211_sta_set_extra_ie() can be called with zero IE\nlength. When this happens or when the extra IE has already\nbeen set -EALREADY is passed down and the supplicant will\ncomplain that the operation is already in progress and it will\nnot let us associate. We correct this by treating -EALREADY\nfrom ieee80211_sta_set_extra_ie() as a success just as we do\nfor wext.\n\nCc: Shan.Palanisamy@Atheros.com\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "51b50fbeb574f581c0b112e035541f42fa3e604a", "tree": "2e2b75a4863b7d9d9b8bcdd3cf56be66414d83bb", "parents": [ "6b347bff145f9a8a0972ca8fc3c44dd1f91b0f16" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun May 24 16:42:30 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 03 14:05:10 2009 -0400" }, "message": "cfg80211: validate AID of stations being added\n\nWe have some validation code in mac80211 but said code will\nforce an invalid AID to 0 which isn\u0027t a valid AID either;\ninstead require a valid AID (1-2007) to be passed in from\nuserspace in cfg80211 already. Also move the code before\nthe race comment since it can only be executed during STA\naddition and thus is not racy.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "faa8fdc85347cc76d87b43ea718785661c54f656", "tree": "d6a2bad74310885e8f0836791c93070d243b6b2c", "parents": [ "3f77316c6b99f596bfbf72c0542f47f7230b702e" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Mon May 11 21:57:58 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 13 15:44:39 2009 -0400" }, "message": "nl80211: Add RSC configuration for new keys\n\nWhen setting a key with NL80211_CMD_NEW_KEY, we should allow the key\nsequence number (RSC) to be set in order to allow replay protection to\nwork correctly for group keys. This patch documents this use for\nnl80211 and adds the couple of missing pieces in nl80211/cfg80211 and\nmac80211 to support this. In addition, WEXT SIOCSIWENCODEEXT compat\nprocessing in cfg80211 is extended to handle the RSC (this was already\nspecified in WEXT, but just not implemented in cfg80211/mac80211).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3f77316c6b99f596bfbf72c0542f47f7230b702e", "tree": "d9c8634e62917687c9a2741fdd72dd2c19c04727", "parents": [ "eccb8e8f0c3af47aeb6dbe4012eb8d4fc888767a" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Mon May 11 21:57:57 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 13 15:44:37 2009 -0400" }, "message": "nl80211: Add IEEE 802.1X PAE control for station mode\n\nAdd a new NL80211_ATTR_CONTROL_PORT flag for NL80211_CMD_ASSOCIATE to\nallow user space to indicate that it will control the IEEE 802.1X port\nin station mode. Previously, mac80211 was always marking the port\nauthorized in station mode. This was enough when drop_unencrypted flag\nwas set. However, drop_unencrypted can currently be controlled only\nwith WEXT and the current nl80211 design does not allow fully secure\nconfiguration. Fix this by providing a mechanism for user space to\ncontrol the IEEE 802.1X port in station mode (i.e., do the same that\nwe are already doing in AP mode).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eccb8e8f0c3af47aeb6dbe4012eb8d4fc888767a", "tree": "3705a833e4a5efb08beb2bfc4175775171e74295", "parents": [ "0e46724a48fcc3bac1fecea413d20af64a75844f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon May 11 21:57:56 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 13 15:44:35 2009 -0400" }, "message": "nl80211: improve station flags handling\n\nIt is currently not possible to modify station flags, but that\ncapability would be very useful. This patch introduces a new\nnl80211 attribute that contains a set/mask for station flags,\nand updates the internal API (and mac80211) to mirror that.\n\nThe new attribute is parsed before falling back to the old so\nthat userspace can specify both (if it can) to work on all\nkernels.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4e943900fb9675d3a5ebdabc2cd4a9a54edace97", "tree": "72b6492d01dffa834133c0cdbd52ce4b65392332", "parents": [ "8fbff4b838c53945d6baeafe609c627000f85cd6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat May 09 20:06:47 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:24:07 2009 -0400" }, "message": "cfg80211: constify key mac address in ops\n\nThe address pointed to by mac_addr can be marked as const.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dc6382ced07d6bad61d0b591fb12ab5da7ca632c", "tree": "277d03c28c0756368d663d1b053ceaed196f666e", "parents": [ "ed9b58bc443a1210b5be1ded6421b17e015bf985" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed May 06 22:09:37 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:23:54 2009 -0400" }, "message": "nl80211 : Add support for configuring MFP\n\nNL80211_CMD_ASSOCIATE request must be able to indicate whether\nmanagement frame protection (IEEE 802.11w) is being used. mac80211 was\nable to use MFP in client mode only with WEXT, but the new\nNL80211_ATTR_USE_MFP attribute will allow this to be done with\nnl80211, too.\n\nSince we are currently using nl80211 for MFP only with drivers that\nuse user space SME, only MFP disabled and required values are\nused. However, the NL80211_ATTR_USE_MFP attribute is an enum that can\nbe extended with MFP optional in the future, if that is needed with\nsome drivers (e.g., if the RSN IE is generated by the driver).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2448798133d747ad339e57099e32a1d1e68aca1c", "tree": "ee09385f5dca9e243c38f5f888baa02605423bd7", "parents": [ "2d0ddec5b2b859f06116f631fc0ffe94fbceb556" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 23 18:52:52 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 06 15:14:37 2009 -0400" }, "message": "mac80211: add driver ops wrappers\n\nIn order to later add tracing or verifications to the driver\ncalls mac80211 makes, this patch adds static inline wrappers\nfor all operations.\n\nAll calls are now written as\n\n\tdrv_\u003cop\u003e(local, ...);\n\ninstead of\n\n\tlocal-\u003eops-\u003e\u003cop\u003e(\u0026local-\u003ehw, ...);\n\nWhere necessary, the wrappers also do existence checking and\nreturn default values as appropriate.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2d0ddec5b2b859f06116f631fc0ffe94fbceb556", "tree": "9bf3cdfcbbefcb34f5984e6d797f488ebe358196", "parents": [ "57c4d7b4c4986037be51476b8e3025d5ba18d8b8" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 23 16:13:26 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 06 15:14:36 2009 -0400" }, "message": "mac80211: unify config_interface and bss_info_changed\n\nThe config_interface method is a little strange, it contains the\nBSSID and beacon updates, while bss_info_changed contains most\nother BSS information for each interface. This patch removes\nconfig_interface and rolls all the information it previously\npassed to drivers into bss_info_changed.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "57c4d7b4c4986037be51476b8e3025d5ba18d8b8", "tree": "bcd24a127b4c79891f45799a20867f49c0f7f949", "parents": [ "f3b85252f081581a8f257545ed748062dce7798b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 23 16:10:04 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 06 15:14:33 2009 -0400" }, "message": "mac80211: clean up beacon interval settings\n\nWe currently have two beacon interval configuration knobs:\nhw.conf.beacon_int and vif.bss_info.beacon_int. This is\nrather confusing, even though the former is used when we\nbeacon ourselves and the latter when we are associated to\nan AP.\n\nThis just deprecates the hw.conf.beacon_int setting in favour\nof always using vif.bss_info.beacon_int. Since it touches all\nthe beaconing IBSS code anyway, we can also add support for\nthe cfg80211 IBSS beacon interval configuration easily.\n\nNOTE: The hw.conf.beacon_int setting is retained for now due\n to drivers still using it -- I couldn\u0027t untangle all\n drivers, some are updated in this patch.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b9a5f8cab751d362f7c2d94899ca788c22fcd1ef", "tree": "e769e2f59ef845cf7c7cc93b64d33eeed49bb9f7", "parents": [ "9e52b0623c6eb49c3f23a326c1fb97bdecc49ba1" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Mon Apr 20 18:39:05 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "nl80211: Add set/get for frag/rts threshold and retry limits\n\nAdd new nl80211 attributes that can be used with NL80211_CMD_SET_WIPHY\nand NL80211_CMD_GET_WIPHY to manage fragmentation/RTS threshold and\nretry limits.\n\nSince these values are stored in struct wiphy, remove the local copy\nfrom mac80211 where feasible (frag \u0026 rts threshold). The retry limits\nare currently needed in struct ieee80211_conf, but these could be\neventually removed since the driver should have access to the values\nin struct wiphy.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "af8cdcd828ad751fae8e6cbfe94eef9f2f23b14b", "tree": "7a00a19c976abbeba16bd04ddc177b6332057c98", "parents": [ "04a773ade0680d862b479d7219973df60f7a3834" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Apr 19 21:25:43 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "mac80211: convert to cfg80211 IBSS API\n\nThis converts mac80211 to the new cfg80211 IBSS API, the\nwext handling functions are called where appropriate.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "691597cb26f236ac7471f1adf925a134c86799d6", "tree": "e89d91e496af082711b7c0789aaf0a985e7ba964", "parents": [ "d726405af6c8c81d2ee5e6a29301c68b9d4c574f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Apr 19 19:57:45 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "cfg80211/mac80211: move wext SIWMLME into cfg80211\n\nSince we have -\u003edeauth and -\u003edisassoc we can support the\nwext SIWMLME call directly without driver wext handlers.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "357303e2b61272b191f2e5d782d94fdd8f50fd71", "tree": "38b88eaf22ab511adc1d9b30396189007ab22623", "parents": [ "955394c98c9cb79bdb3e6b479695af3a90ea0623" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Thu Apr 16 18:44:53 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:16 2009 -0400" }, "message": "mac80211: Allow scan to be requested in AP mode\n\nWe can allow scan requests in AP mode as long as the interface has not\nyet been configured to send out Beacon frames (or if beaconing has\nbeen disabled prior to the scan request). This makes it easier to scan\nfor neighboring BSSes during AP initialization and makes it possible\nto run a scan without setting the interface down, if needed. Without\nthis change, the only available option would be to set the interface\ndown, move into station mode, and set the interface up, prior to\nrequesting the scan.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eec60b037a875513d9715dcdb90b13ed81fc5f26", "tree": "b031d92f7613f2c043c151f102307ec3351843c1", "parents": [ "35a8efe1a67ba5d7bb7492f67f52ed2aa4925892" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Fri Mar 20 21:21:19 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:05 2009 -0400" }, "message": "nl80211: Check iftype in cfg80211 code\n\nWe do not want to require all the drivers using cfg80211 to need to do\nthis. In addition, make the error values consistent by using\nEOPNOTSUPP instead of semi-random assortment of errno values.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "35a8efe1a67ba5d7bb7492f67f52ed2aa4925892", "tree": "7783b27bebbc3f113a15ba0b884c24fb627c37a2", "parents": [ "255e737eab645ec6037baeca04a5e0a7c3b1f459" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Fri Mar 20 21:21:18 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:05 2009 -0400" }, "message": "nl80211: Check that netif_runnin is true in cfg80211 code\n\nWe do not want to require all the drivers using cfg80211 to need to do\nthis or to be prepared to handle these commands when the interface is\ndown.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "65fc73ac4a310945dfeceac961726c2765ad2ec0", "tree": "5c1410524f3a82b653d6a08753fbe5bdd9a984fa", "parents": [ "feeb44454996cf5b375fad21697bf6202fe30dd2" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Fri Mar 20 21:21:16 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:04 2009 -0400" }, "message": "nl80211: Remove NL80211_CMD_SET_MGMT_EXTRA_IE\n\nThe functionality that NL80211_CMD_SET_MGMT_EXTRA_IE provided can now\nbe achieved with cleaner design by adding IE(s) into\nNL80211_CMD_TRIGGER_SCAN, NL80211_CMD_AUTHENTICATE,\nNL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, and\nNL80211_CMD_DISASSOCIATE.\n\nSince this is a very recently added command and there are no known (or\nknown planned) applications using NL80211_CMD_SET_MGMT_EXTRA_IE and\ntaken into account how much extra complexity it adds to the IE\nprocessing we have now (and need to add in the future to fix IE order\nin couple of frames), it looks like the best option is to just remove\nthe implementation of this command for now. The enum values themselves\nare left to avoid changing the nl80211 command or attribute numbers.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "636a5d3625993c5ca59abc81794b9ded93cdb740", "tree": "53ee8d522153c36c631f8cb733a6e808c20ef332", "parents": [ "6039f6d23fe792d615da5449e9fa1c6b43caacf6" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Thu Mar 19 13:39:22 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:02 2009 -0400" }, "message": "nl80211: Add MLME primitives to support external SME\n\nThis patch adds new nl80211 commands to allow user space to request\nauthentication and association (and also deauthentication and\ndisassociation). The commands are structured to allow separate\nauthentication and association steps, i.e., the interface between\nkernel and user space is similar to the MLME SAP interface in IEEE\n802.11 standard and an user space application takes the role of the\nSME.\n\nThe patch introduces MLME-AUTHENTICATE.request,\nMLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and\nMLME-DISASSOCIATE.request primitives. The authentication and\nassociation commands request the actual operations in two steps\n(assuming the driver supports this; if not, separate authentication\nstep is skipped; this could end up being a separate \"connect\"\ncommand).\n\nThe initial implementation for mac80211 uses the current\nnet/mac80211/mlme.c for actual sending and processing of management\nframes and the new nl80211 commands will just stop the current state\nmachine from moving automatically from authentication to association.\nFuture cleanup may move more of the MLME operations into cfg80211.\n\nThe goal of this design is to provide more control of authentication and\nassociation process to user space without having to move the full MLME\nimplementation. This should be enough to allow IEEE 802.11r FT protocol\nand 802.11s SAE authentication to be implemented. Obviously, this will\nalso bring the extra benefit of not having to use WEXT for association\nrequests with mac80211. An example implementation of a user space SME\nusing the new nl80211 commands is available for wpa_supplicant.\n\nThis patch is enough to get IEEE 802.11r FT protocol working with\nover-the-air mechanism (over-the-DS will need additional MLME\nprimitives for handling the FT Action frames).\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e31ae0508315ebf5d8b1b8a1fca8550737fb3996", "tree": "fe4c453d40df43ac2544ab9ec107403ccd9bbcca", "parents": [ "db5b4f7ae3901fdc48c5b988fc2a5e0cb4ec1870" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Fri Feb 27 09:44:00 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Mar 05 14:39:32 2009 -0500" }, "message": "mac80211: Notify the driver only when the beacon interval changes\n\nCurrently, the driver is unconditionally notified of beacon\ninterval. This is a problem in AP mode, because the driver has\nto know that the beacon interval has actualy changed to recalculate\nTBTT and reset the HW TSF. Fix this to make mac80211 notify the driver\nonly when the beacon interval has been reconfigured to a new value.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "98c8a60a04316e94ccea8221cf16768ce91bd214", "tree": "c698e0526f7521bf0f7bd0122c0ee6a2ab08eb1c", "parents": [ "fdbf7335ea1a4048ff4818bf15bdcab1925dc6df" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Tue Feb 17 13:24:57 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:52:39 2009 -0500" }, "message": "nl80211: Provide access to STA TX/RX packet counters\n\nThe TX/RX packet counters are needed to fill in RADIUS Accounting\nattributes Acct-Output-Packets and Acct-Input-Packets. We already\ncollect the needed information, but only the TX/RX bytes were\npreviously exposed through nl80211. Allow applications to fetch the\npacket counters, too, to provide more complete support for accounting.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "469002983fc90c2ff0959e2b03335c0fe2e4d5a9", "tree": "fdcf78dcdaeadba897abd86d39d0275e236803b3", "parents": [ "96f5e66e8a79810e2982cdcfa28e554f3d97da21" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Feb 15 12:44:28 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:51:42 2009 -0500" }, "message": "mac80211: split IBSS/managed code\n\nThis patch splits out the ibss code and data from managed (station) mode.\nThe reason to do this is to better separate the state machines, and have\nthe code be contained better so it gets easier to determine what exactly\na given change will affect, that in turn makes it easier to understand.\n\nThis is quite some churn, especially because I split sdata-\u003eu.sta into\nsdata-\u003eu.mgd and sdata-\u003eu.ibss, but I think it\u0027s easier to maintain that\nway. I\u0027ve also shuffled around some code -- null function sending is only\napplicable to managed interfaces so put that into that file, some other\nfunctions are needed from various places so put them into util, and also\nrearranged the prototypes in ieee80211_i.h accordingly.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2a5193119269062608582418deba7af82844159a", "tree": "1f2fe8cffbeb7530dce7fa708310f6fb29ab0dd8", "parents": [ "849b7967818995a32c3017542e33eb3155944368" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Feb 10 21:25:55 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 13 13:45:49 2009 -0500" }, "message": "cfg80211/nl80211: scanning (and mac80211 update to use it)\n\nThis patch adds basic scan capability to cfg80211/nl80211 and\nchanges mac80211 to use it. The BSS list that cfg80211 maintains\nis made driver-accessible with a private area in each BSS struct,\nbut mac80211 doesn\u0027t yet use it. That\u0027s another large project.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "60b22511921fe79b2a94a27c09cadfd32fcef5d5", "tree": "9e77ff55f56493f4bc80b43752ba99c9c5403f0c", "parents": [ "e4e5e2b0b83c816e581ca4671569306bcba77667" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Feb 10 21:25:41 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 13 13:45:26 2009 -0500" }, "message": "mac80211: reject extra IEs for probe request when hw_scan\n\nWe cannot currently hand off extra IEs to hw_scan, so reject\nconfiguring extra IEs for probe request frames when hw_scan\nis set.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "078e1e60dd6c6b0d4bc8d58ccb80c008e8efc9ff", "tree": "7fa2580b76a5693a37449e9cc075eee2394bb0c3", "parents": [ "07c1e852514e862e246b9f2962ce8fc0d7ac8ed1" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jan 22 18:07:31 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:01:13 2009 -0500" }, "message": "mac80211: Add capability to enable/disable beaconing\n\nThis patch adds a flag to notify drivers to start and stop\nbeaconing when needed, for example, during a scan run. Based\non Sujith\u0027s first patch to do the same, but now disables\nbeaconing for all virtual interfaces while scanning, has a\nseparate change flag and tracks user-space requests.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "665af4fc8979734d8f73c9a6732be07e545ce4cc", "tree": "e6efab304166f0f4f30b75906930def19b1a3fb8", "parents": [ "0378b3f1c49d48ed524eabda7e4340163d9483c9" ], "author": { "name": "Bob Copeland", "email": "me@bobcopeland.com", "time": "Mon Jan 19 11:20:53 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:00:52 2009 -0500" }, "message": "mac80211: add suspend/resume callbacks\n\nThis patch introduces suspend and resume callbacks to mac80211,\nallowing mac80211 to quiesce its state (bringing down interfaces,\nremoving keys, etc) in preparation for suspend. cfg80211 will call\nthe suspend hook before the device suspend, and resume hook after\nthe device resume.\n\nSigned-off-by: Bob Copeland \u003cme@bobcopeland.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9aed3cc124343d92be6697e9af3928bdfe8eb03e", "tree": "6a49a68422656790f944f37e3f34379b753d1dab", "parents": [ "0c1aa495961f03c964b3287cf5800217cf6f2cee" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Tue Jan 13 16:03:29 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:00:35 2009 -0500" }, "message": "nl80211: New command for adding extra IE(s) into management frames\n\nA new nl80211 command, NL80211_CMD_SET_MGMT_EXTRA_IE, can be used to\nadd arbitrary IE data into the end of management frames. The interface\nallows extra IEs to be configured for each management frame subtype, but\nonly some of them (ProbeReq, ProbeResp, Auth, (Re)AssocReq, Deauth,\nDisassoc) are currently accepted in mac80211 implementation.\n\nThis makes it easier to implement IEEE 802.11 extensions like WPS and\nFT that add IE(s) into some management frames. In addition, this can\nbe useful for testing and experimentation purposes.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3cfcf6ac6d69dc290e96416731eea5c88ac7d426", "tree": "35bc626e2e3f7c37a7eb50c1f057adb4830eccc6", "parents": [ "765cb46a3fc856245ea68a7c961ac87c77e4ae2d" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Jan 08 13:32:02 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:00:03 2009 -0500" }, "message": "mac80211: 802.11w - Use BIP (AES-128-CMAC)\n\nAdd mechanism for managing BIP keys (IGTK) and integrate BIP into the\nTX/RX paths.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5394af4d86ae51b369ff243c3f75b6f9a74e164b", "tree": "752ff0a1b7feb28e4fce87957047433d5f39a6c2", "parents": [ "039498c6ec67bd718ac1c8e7f6b4e2cfe2146773" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Jan 08 13:31:59 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:00:00 2009 -0500" }, "message": "mac80211: 802.11w - STA flag for MFP\n\nAdd flags for setting STA entries and struct ieee80211_if_sta to\nindicate whether management frame protection (MFP) is used.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b8d476c8cb64a1640d8762aa442b8a73fa74b7d5", "tree": "0313f5af3f042abb8cf79fd9d188b3929fe80f16", "parents": [ "0fe45b1debba7302155b62f3829119a1185a4f5a" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Fri Dec 12 17:08:31 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 19 15:23:08 2008 -0500" }, "message": "mac80211: Send Layer 2 Update frame on reassociation\n\nWhen a STA roams back to the same AP before the previous STA entry has\nexpired, a new STA entry is not added in mac80211. However, a Layer 2\nUpdate frame still needs to be transmitted to update layer 2 devices\nabout the new location for the STA. Without this, switches may\ncontinue to forward frames to the previous (now incorrect) port when\nSTA roams between APs.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "094d05dc32fc2930e381189a942016e5561775d9", "tree": "4deedbcbe196f88cb8d9fe0cd0755775a7ff0939", "parents": [ "420e7fabd9c6d907280ed6b3e40eef425c5d8d8d" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Fri Dec 12 11:57:43 2008 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 19 15:22:54 2008 -0500" }, "message": "mac80211: Fix HT channel selection\n\nHT management is done differently for AP and STA modes, unify\nto just the -\u003econfig() callback since HT is fundamentally a\nPHY property and cannot be per-BSS.\n\nRename enum nl80211_sec_chan_offset as nl80211_channel_type to denote\nthe channel type ( NO_HT, HT20, HT40+, HT40- ).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "420e7fabd9c6d907280ed6b3e40eef425c5d8d8d", "tree": "6effc9f9386746d1aeb953e32fe82b0a5a5fdf18", "parents": [ "221b3d60cbb2740ec7d46a4f1ea6d3318a112e51" ], "author": { "name": "Henning Rogge", "email": "hrogge@googlemail.com", "time": "Thu Dec 11 22:04:19 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 19 15:04:54 2008 -0500" }, "message": "nl80211: Add signal strength and bandwith to nl80211station info\n\nThis patch adds signal strength and transmission bitrate\nto the station_info of nl80211.\n\nSigned-off-by: Henning Rogge \u003crogge@fgan.de\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "447107fb32d75425c95a33f58e6b4b760b470092", "tree": "83ae7e491ad2c56a9d29d69f38f30967fc2629b6", "parents": [ "bb608e9db7d29616fb6e0d856c23434610d4a1bd" ], "author": { "name": "Reinette Chatre", "email": "reinette.chatre@intel.com", "time": "Thu Dec 04 14:49:08 2008 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 12 13:48:20 2008 -0500" }, "message": "mac80211: remove WARN_ON() from ieee80211_hw_config\n\nieee80211_hw_config can return an error when the hardware\nhas rfkill enabled. A WARN_ON() is too harsh for this\nfailure as it is a valid scenario. Only comment this warning\nas we would like to have it back when rfkill is integrated into\nmac80211.\n\nAlso reintroduce propagation of error if ieee80211_hw_config fails\nin ieee80211_config_beacon.\n\nThis patch partially reverts patch:\n5f0387fc3337ca26f0745f945f550f0c3734960f\n\"mac80211: clean up ieee80211_hw_config errors\"\n\nSigned-off-by: Reinette Chatre \u003creinette.chatre@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "72bdcf34380917260da41e3c49e10edee04bc5cd", "tree": "cbfb8e389f58514febf47ea62781517a9df42f25", "parents": [ "72eaa43a532b4156966444779829a986a4432f11" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Wed Nov 26 16:15:24 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 05 09:32:11 2008 -0500" }, "message": "nl80211: Add frequency configuration (including HT40)\n\nThis patch adds new NL80211_CMD_SET_WIPHY attributes\nNL80211_ATTR_WIPHY_FREQ and NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to allow\nuserspace to set the operating channel (e.g., hostapd for AP mode).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fbf189273926d83d71c4c321f1215162569506ac", "tree": "3eeed723dbea11dd78e12206dd980b84c659a0dc", "parents": [ "d61272cbb35fa1c08fe94898583d880256f2dbd3" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Oct 30 19:50:30 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 10 15:17:40 2008 -0500" }, "message": "mac80211: Allow AP mode to be enabled\n\nWith the addition of basic rate set and TX queue parameter\nconfiguration and confirmation that power save buffering is\nworking again, mac80211 is now in state that allows AP mode to be\nused without major problems. Consequently, it is time to allow this\nmode to be enabled without having to patch the kernel.\n\nAP mode requires hostapd for management frame processing and as such,\nconfiguring this mode is only allowed through cfg80211 (not with\niwconfig and WEXT).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "318884875bdddca663ecc373c813cf8e117d9e43", "tree": "de9cfbe0bf24bea0ab1546a0613fbc9417bb6cb8", "parents": [ "1e898ff83c31c303f73c3893d1ac519e4d9b59e5" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Oct 30 16:59:24 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 10 15:17:40 2008 -0500" }, "message": "nl80211: Add TX queue parameter configuration\n\nAdd a new attribute, NL80211_ATTR_WIPHY_TXQ_PARAMS, that can be used with\nNL80211_CMD_SET_WIPHY for userspace (e.g., hostapd) to set TX queue\nparameters (txop, cwmin, cwmax, aifs).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "90c97a040d6b08cc4890328aa262fdc37336ab01", "tree": "d152a2edcb55d2d7b0428721341f7b271ffe39f8", "parents": [ "fe63bfa3669dbdd4985ed35d9a0ed08881f62516" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Oct 30 16:59:22 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 10 15:17:39 2008 -0500" }, "message": "nl80211: Add basic rate configuration for AP mode\n\nAdd a new attribute, NL80211_ATTR_BSS_BASIC_RATES, that can be used with\nNL80211_CMD_SET_BSS for userspace (e.g., hostapd) to set which rates are\nin the basic rate set.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "93da9cc17c5ae8a751886fd4732db89ad5e9bdb9", "tree": "5c8c16eaeca4c6e4555682a4ab1b448cdbe21595", "parents": [ "4a68ec535ef1043319928f601d633f78e650a16f" ], "author": { "name": "colin@cozybit.com", "email": "colin@cozybit.com", "time": "Tue Oct 21 12:03:48 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:39 2008 -0400" }, "message": "Add nl80211 commands to get and set o11s mesh networking parameters\n\nThe two new commands are NL80211_CMD_GET_MESH_PARAMS and\nNL80211_CMD_SET_MESH_PARAMS. There is a new attribute enum,\nNL80211_ATTR_MESH_PARAMS, which enumerates the various mesh configuration\nparameters.\n\nMoved struct mesh_config from mac80211/ieee80211_i.h to net/cfg80211.h.\nnl80211_get_mesh_params and nl80211_set_mesh_params unpack the netlink messages\nand ask the driver to get or set the configuration. This is done via two new\nfunction stubs, get_mesh_params and set_mesh_params, in struct cfg80211_ops.\n\nSigned-off-by: Colin McCabe \u003ccolin@cozybit.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ae5eb02641233a4e9d1b92d22090f1b1afa14466", "tree": "117b7cb5efa3ff1cf714218098fc6db3820ed4e0", "parents": [ "bda3933a8aceedd03e0dd410844bd310033ca756" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Oct 14 16:58:37 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:16 2008 -0400" }, "message": "mac80211: rewrite HT handling\n\nThe HT handling has the following deficiencies, which I\u0027ve\n(partially) fixed:\n * it always uses the AP info even if there is no AP,\n hence has no chance of working as an AP\n * it pretends to be HW config, but really is per-BSS\n * channel sanity checking is left to the drivers\n * it generally lets the driver control too much\n\nHT enabling is still wrong with this patch if you have more than\none virtual STA mode interface, but that never happens currently.\nOnce WDS, IBSS or AP/VLAN gets HT capabilities, it will also be\nwrong, see the comment in ieee80211_enable_ht().\n\nAdditionally, this fixes a number of bugs:\n * mac80211: ieee80211_set_disassoc doesn\u0027t notify the driver any\n more since the refactoring\n * iwl-agn-rs: always uses the HT capabilities from the wrong stuff\n mac80211 gives it rather than the actual peer STA\n * ath9k: a number of bugs resulting from the broken HT API\n\nI\u0027m not entirely happy with putting the HT capabilities into\nstruct ieee80211_sta as restricted to our own HT TX capabilities,\nbut I see no cleaner solution for now.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "bda3933a8aceedd03e0dd410844bd310033ca756" }