)]}'
{
  "log": [
    {
      "commit": "5ce6e438d5d9ed8ed775cd1e94f92002c8da2bad",
      "tree": "9b6ce4bc8e7600e30124c8b0f1cbc2ae06499722",
      "parents": [
        "b29e7eb4b8b3e5f4ff8066af648e9fe2fc707b16"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue May 11 16:20:57 2010 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed May 12 16:39:05 2010 -0400"
      },
      "message": "mac80211: add offload channel switch support\n\nThis adds support for offloading the channel switch\noperation to devices that support such, typically\nby having specific firmware API for it. The reasons\nfor this could be that the firmware provides better\ntiming or that regulatory enforcement done by the\ndevice requires special handling of CSAs.\n\nIn order to allow drivers to specify the timing to\nthe device, the new channel_switch callback will\npass through the received frame\u0027s mactime, where\navailable.\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "a060bbfe4ee95d115e8f9705a66894ac34e2c475",
      "tree": "6aea616cdd07c06886c0e1ffade68e5d58f9e9c2",
      "parents": [
        "9043f3b89abebfbfe4b8d64c7b71b9ac0b9eaa0b"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Apr 27 11:59:34 2010 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Apr 27 16:09:23 2010 -0400"
      },
      "message": "mac80211: give virtual interface to hw_scan\n\nWhen scanning, it is somewhat important to scan\non the correct virtual interface. All drivers\nthat currently implement hw_scan only support a\nsingle virtual interface, but that may change\nand then we\u0027d want to be ready.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "b5878a2dc5e7e7f031a52c3e15b571224cb6b540",
      "tree": "4d035602f4a4d6e021eaf261f3665d4a5439cfd8",
      "parents": [
        "403820edc4ba1f2fb2514c022f2662c498ce0d11"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Apr 07 16:48:40 2010 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Apr 08 15:24:13 2010 -0400"
      },
      "message": "mac80211: enhance tracing\n\nEnhance tracing by adding tracing for a variety of\ncallbacks that the drivers call, and also for\ninternal calls (currently limited to queue status).\nThis can aid debugging what is going on in mac80211\nin interaction with drivers, since we can now see\nwhat drivers call and not just what mac80211 calls\nin the driver.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "349e6b7289f8a3d3d5d3b859e00b41f27d1211df",
      "tree": "d80af4e7b9ece2b42e8093f44bfedd13d9653bd5",
      "parents": [
        "00a08eb62f790383bcc8ea309d4afb9ef346ef0b"
      ],
      "author": {
        "name": "Kalle Valo",
        "email": "kalle.valo@iki.fi",
        "time": "Sun Feb 07 10:22:01 2010 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 08 16:51:01 2010 -0500"
      },
      "message": "mac80211: remove get_tx_stats() driver op\n\nget_tx_stats() driver operation is not currently used anywhere in mac80211\nand there are no plans to use it in the not-so-near future. So it can go\nwithout anyone missing it.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@iki.fi\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "34e895075e21be3e21e71d6317440d1ee7969ad0",
      "tree": "217fe70e32e54ef0134f477510472f3992655d79",
      "parents": [
        "070bb5477fb4029131aad4941d7aaf0093db0c38"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Feb 03 13:59:58 2010 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 08 16:50:53 2010 -0500"
      },
      "message": "mac80211: allow station add/remove to sleep\n\nMany drivers would like to sleep during station\naddition and removal, and currently have a high\ncomplexity there from not being able to.\n\nThis introduces two new callbacks sta_add() and\nsta_remove() that drivers can implement instead\nof using sta_notify() and that can sleep, and\nthe new sta_add() callback is also allowed to\nfail.\n\nThe reason we didn\u0027t do this previously is that\nthe IBSS code wants to insert stations from the\nRX path, which is a tasklet, so cannot sleep.\nThis patch will keep the station allocation in\nthat path, but moves adding the station to the\ndriver out of line. Since the addition can now\nfail, we can have IBSS peer structs the driver\nrejected -- in that case we still talk to the\nstation but never tell the driver about it in\nthe control.sta pointer. If there will ever be\na driver that has a low limit on the number of\nstations and that cannot talk to any stations\nthat are not known to it, we need to do come up\nwith a new strategy of handling larger IBSSs,\nmaybe quicker expiry or rejecting peers.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "6e7e6213e4956828927c30e3ef5a42812d00c650",
      "tree": "3e13859aae5ac0a50eecd452e96849e5e373f444",
      "parents": [
        "5ffaf8a361b4c9025963959a744f21d8173c7669",
        "c0ce77b8323c1a0d4eeef97caf16c0ea971222a9"
      ],
      "author": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 08 16:38:38 2010 -0500"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 08 16:38:38 2010 -0500"
      },
      "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tnet/mac80211/scan.c\n"
    },
    {
      "commit": "3092ad054406f069991ca561adc74f2d9fbb6867",
      "tree": "498446eccd918d1fb4655a70422210c0c4d63394",
      "parents": [
        "aa8bc9ef18a2c5b2b97e1f36ee9604cf15743f96"
      ],
      "author": {
        "name": "Zhu Yi",
        "email": "yi.zhu@intel.com",
        "time": "Tue Jan 26 15:58:57 2010 +0800"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Jan 26 11:52:13 2010 -0500"
      },
      "message": "mac80211: fix NULL pointer dereference when ftrace is enabled\n\nI got below kernel oops when I try to bring down the network interface if\nftrace is enabled. The root cause is drv_ampdu_action() is passed with a\nNULL ssn pointer in the BA session tear down case. We need to check and\navoid dereferencing it in trace entry assignment.\n\nBUG: unable to handle kernel NULL pointer dereference\nModules linked in: at (null)\nIP: [\u003cf98fe02a\u003e] ftrace_raw_event_drv_ampdu_action+0x10a/0x160 [mac80211]\n*pde \u003d 00000000\nOops: 0000 [#1] SMP DEBUG_PAGEALLOC\n[...]\nCall Trace:\n [\u003cf98fdf20\u003e] ? ftrace_raw_event_drv_ampdu_action+0x0/0x160 [mac80211]\n [\u003cf98dac4c\u003e] ? __ieee80211_stop_rx_ba_session+0xfc/0x220 [mac80211]\n [\u003cf98d97fb\u003e] ? ieee80211_sta_tear_down_BA_sessions+0x3b/0x50 [mac80211]\n [\u003cf98dc6f6\u003e] ? ieee80211_set_disassoc+0xe6/0x230 [mac80211]\n [\u003cf98dc6ac\u003e] ? ieee80211_set_disassoc+0x9c/0x230 [mac80211]\n [\u003cf98dcbb8\u003e] ? ieee80211_mgd_deauth+0x158/0x170 [mac80211]\n [\u003cf98e4bdb\u003e] ? ieee80211_deauth+0x1b/0x20 [mac80211]\n [\u003cf8987f49\u003e] ? __cfg80211_mlme_deauth+0xe9/0x120 [cfg80211]\n [\u003cf898b870\u003e] ? __cfg80211_disconnect+0x170/0x1d0 [cfg80211]\n\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: stable@kernel.org\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "b3fbdcf49f940d0703c356441e0daf045e64e076",
      "tree": "f63416cc9b80a6757ec6fa57190f581b2b3a6d31",
      "parents": [
        "e4fca007b06165900d0e44e8d5e251376819bf5d"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Jan 21 11:40:47 2010 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jan 22 16:08:55 2010 -0500"
      },
      "message": "mac80211: pass vif and station to update_tkip_key\n\nWhen a TKIP key is updated, we should pass the station\npointer instead of just the address, since drivers can\nuse that to store their own data. We also need to pass\nthe virtual interface pointer.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "310bc676e314e92c18257bfc916951879451ee32",
      "tree": "12050b5b473b8c9a1bf67450e03d45ade2a4b219",
      "parents": [
        "81077e82c3f591578625805dd6464a27a9ff56ec"
      ],
      "author": {
        "name": "Lukáš Turek",
        "email": "8an@praha12.net",
        "time": "Mon Dec 21 22:50:48 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Jan 12 13:50:07 2010 -0500"
      },
      "message": "mac80211: Add new callback set_coverage_class\n\nMac80211 callback to driver set_coverage_class() sets slot time and ACK\ntimeout for given IEEE 802.11 coverage class. The callback is optional,\nbut it\u0027s essential for long distance links.\n\nSigned-off-by: Lukas Turek \u003c8an@praha12.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "a80f7c0b088187c8471b441d461e937991870661",
      "tree": "f673c08009a03f2e988a638510b112a5584bea11",
      "parents": [
        "9607e6b66a0d25ca63b70d54a4283fa13d8f7c9d"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Dec 23 13:15:32 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Dec 28 16:54:51 2009 -0500"
      },
      "message": "mac80211: introduce flush operation\n\nWe\u0027ve long lacked a good confirmation that frames\nhave really gone out, e.g. before going off-channel\nfor a scan. Add a flush() operation that drivers\ncan implement to provide that confirmation, and use\nit in a few places:\n * before scanning sends the nullfunc frames\n * after scanning sends the nullfunc frames, if any\n * when going idle, to send any pending frames\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "0f78231bffb868a30e8533aace142213266bb811",
      "tree": "317f65dc6d89e9a89ad83f94fadd780dd1e0ca83",
      "parents": [
        "18974b5b0b5e758d416c550553b143e5c8038281"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Dec 01 13:37:02 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Dec 22 13:31:16 2009 -0500"
      },
      "message": "mac80211: enable spatial multiplexing powersave\n\nEnable spatial multiplexing in mac80211 by telling the\ndriver what to do and, where necessary, sending action\nframes to the AP to update the requested SMPS mode.\n\nAlso includes a trivial implementation for hwsim that\njust logs the requested mode.\n\nFor now, the userspace interface is in debugfs only,\nand let you toggle the requested mode at any time.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "12375ef933fa8271396ed0c1e318cb1bd2e2689d",
      "tree": "b05ccc4573cb8f0a1b89edeeae7e6c5805f75f67",
      "parents": [
        "47846c9b0c10808d9337d2e7d09361f3e0a0a71a"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Nov 25 20:30:31 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Dec 21 18:38:54 2009 -0500"
      },
      "message": "mac80211: trace interface name\n\nIt\u0027s not all that useful to have the vif/sdata pointer,\nwe\u0027d rather refer to the interfaces by their name.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "47846c9b0c10808d9337d2e7d09361f3e0a0a71a",
      "tree": "8e5d0dbf3309b7868fa73a888f9561ffea1580e3",
      "parents": [
        "abe60632f311d515b082b450504ee24006023951"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Nov 25 17:46:19 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Dec 21 18:38:52 2009 -0500"
      },
      "message": "mac80211: reduce reliance on netdev\n\nFor bluetooth 3, we will most likely not have\na netdev for a virtual interface (sdata), so\nprepare for that by reducing the reliance on\nhaving a netdev. This patch moves the name\nand address fields into the sdata struct and\nuses them from there all over. Some work is\nneeded to keep them sync\u0027ed, but that\u0027s not\na lot of work and in slow paths anyway.\n\nIn doing so, this also reduces the number of\npointer dereferences in many places, because\nof things like sdata-\u003edev-\u003edev_addr becoming\nsdata-\u003evif.addr.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "f911ab83a2c07118dc605d643545647cef6f2322",
      "tree": "d4941ab5fb9ff5ee5a7603c1e79d67381e6804cb",
      "parents": [
        "2569a826de16ff82302a8a091228275be1aa911c"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Nov 25 19:07:20 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Sat Nov 28 15:05:03 2009 -0500"
      },
      "message": "mac80211: log more data when tracing\n\nEnable logging of more configuration data when tracing\nis enabled. Except for the channel frequency this is\nonly useful with the binary trace format, but that can\nbe recorded and replayed with trace-cmd and I will be\nworking on a plugin that reports all the information.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "c951ad3550ab40071bb0f222ba6125845769c08a",
      "tree": "9db1d3c110b359a34a3d706eaf40285cfa01550b",
      "parents": [
        "3b53fde8ac40c4321389def14d7f4a9e14092fd3"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Nov 16 12:00:38 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Nov 18 17:09:15 2009 -0500"
      },
      "message": "mac80211: convert aggregation to operate on vifs/stas\n\nThe entire aggregation code currently operates on the\nhw pointer and station addresses, but that needs to\nchange to make stations purely per-vif; As one step\npreparing for that make the aggregation code callable\nwith the station, or by the combination of virtual\ninterface and station address.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "3ac64beecd27400d12cc7afb4108eef26c499f6a",
      "tree": "da0220085f68e30fe61ba9b8833dc6311d6dc25e",
      "parents": [
        "ea416a793d2b611f22b42ba094fd2e5bd30fff43"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Aug 17 16:16:53 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Aug 20 11:35:58 2009 -0400"
      },
      "message": "mac80211: allow configure_filter callback to sleep\n\nOver time, a whole bunch of drivers have come up\nwith their own scheme to delay the configure_filter\noperation to a workqueue. To be able to simplify\nthings, allow configure_filter to sleep, and add\na new prepare_multicast callback that drivers that\nneed the multicast address list implement. This new\ncallback must be atomic, but most drivers either\ndon\u0027t care or just calculate a hash which can be\ndone atomically and then uploaded to the hardware\nnon-atomically.\n\nA cursory look suggests that at76c50x-usb, ar9170,\nmwl8k (which is actually very broken now), rt2x00,\nwl1251, wl1271 and zd1211 should make use of this\nnew capability.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "f742880c9ca733b6c18bfaa0f5ad2a57f37180c2",
      "tree": "17f915937575f95ec22153571c6544c307145504",
      "parents": [
        "a99d02483a40b9410d8a7af3b653ebc3f106280f"
      ],
      "author": {
        "name": "Christian Lamparter",
        "email": "chunkeey@web.de",
        "time": "Sun Jul 19 23:21:07 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jul 24 15:05:27 2009 -0400"
      },
      "message": "mac80211: fix spare warnings in driver-trace.h\n\nThis patch fixes the following errors:\n\ndriver-trace.h:148:1: error: cannot size expression\ndriver-trace.h:148:1: error: cannot size expression\n[...]\ndriver-trace.h:222:1: error: cannot size expression\ndriver-trace.h:71:1: error: incompatible types for operation (\u003c)\ndriver-trace.h:71:1:    left side has type void *\u003cnoident\u003e\ndriver-trace.h:71:1:    right side has type int\ndriver-trace.h:99:1: error: incompatible types for operation (\u003c)\ndriver-trace.h:99:1:    left side has type void *\u003cnoident\u003e\ndriver-trace.h:99:1:    right side has type int\ndriver-trace.h:148:1: error: incompatible types for operation (\u003c)\ndriver-trace.h:148:1:    left side has type void *\u003cnoident\u003e\ndriver-trace.h:148:1:    right side has type int\ndriver-trace.h:222:1: error: cannot size expression\ndriver-trace.h:248:1: error: incompatible types for operation (\u003c)\ndriver-trace.h:248:1:    left side has type void *\u003cnoident\u003e\ndriver-trace.h:248:1:    right side has type int\ndriver-trace.h:446:1: error: incompatible types for operation (\u003c)\ndriver-trace.h:446:1:    left side has type void *\u003cnoident\u003e\ndriver-trace.h:446:1:    right side has type int\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@web.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "0a2b8bb24d4eb67788edd71d1ef8aa86c2e17e0f",
      "tree": "515bc3db1f3d46ce967320b0bb9914ccd64fddbc",
      "parents": [
        "99783e2cde6eccbd31efeb03a79f26bb5f239c36"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Jul 07 13:46:22 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jul 24 15:05:06 2009 -0400"
      },
      "message": "mac80211: driver operation debugging\n\nThis makes mac80211 use the event tracing framework\nto log all operations as given to the driver. This\nwill need to be extended with more information, but\nas a start it should be good.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    }
  ]
}