)]}' { "log": [ { "commit": "0f2df9eac70423838a1f8d410fd3899ddd88317b", "tree": "0617f723320d83eca5cef9c964c001014e74213f", "parents": [ "8c11e4ab09ffb975a89802dde0e9aa52a53b8aa5", "1144601118507f8b3b676a9a392584d216d3f2cc" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 08 13:34:54 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 08 13:34:54 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into merge\n\nConflicts:\n\tDocumentation/feature-removal-schedule.txt\n\tdrivers/net/wireless/ath/ath5k/phy.c\n\tdrivers/net/wireless/iwlwifi/iwl-4965.c\n\tdrivers/net/wireless/iwlwifi/iwl-agn.c\n\tdrivers/net/wireless/iwlwifi/iwl-core.c\n\tdrivers/net/wireless/iwlwifi/iwl-core.h\n\tdrivers/net/wireless/iwlwifi/iwl-tx.c\n" }, { "commit": "d5cdfacb35ed886271d1ccfffbded98d3447da17", "tree": "8233a713949c4c8da8c98e75868efc74d5613c3d", "parents": [ "7590a550b88b8c3cb025f0a8ed58e279ad62e4c1" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Sun Apr 04 09:37:19 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 07 14:37:56 2010 -0400" }, "message": "cfg80211: Add local-state-change-only auth/deauth/disassoc\n\ncfg80211 is quite strict on allowing authentication and association\ncommands only in certain states. In order to meet these requirements,\nuser space applications may need to clear authentication or\nassociation state in some cases. Currently, this can be done with\ndeauth/disassoc command, but that ends up sending out Deauthentication\nor Disassociation frame unnecessarily. Add a new nl80211 attribute to\nallow this sending of the frame be skipped, but with all other\ndeauth/disassoc operations being completed.\n\nSimilar state change is also needed for IEEE 802.11r FT protocol in\nthe FT-over-DS case which does not use Authentication frame exchange\nin a transition to another BSS. For this to work with cfg80211, an\nauthentication entry needs to be created for the target BSS without\nsending out an Authentication frame. The nl80211 authentication\ncommand can be used for this purpose, too, with the new attribute to\nindicate that the command is only for changing local state. This\nenables wpa_supplicant to complete FT-over-DS transition successfully.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d5d9de024c157a3dfbab191241c5c51e4d4c069a", "tree": "f05c33d67881e5a08a5650a5202602d1edcfb987", "parents": [ "932d37c094b3c3410b4059f18f3b5c756bff059a" ], "author": { "name": "Marco Porsch", "email": "marco.porsch@siemens.com", "time": "Tue Mar 30 10:00:16 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 31 14:49:12 2010 -0400" }, "message": "nl80211: reenable station del for mesh\n\niw dev \u003cdevname\u003e station del \u003cMAC address\u003e is quiet useful in mesh mode and should be possible.\n\nSigned-off-by: Marco Porsch \u003cmarco.porsch@siemens.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e3cf8b3f7b9eefbe1d39b160726d6e5c2cbb4c5d", "tree": "c59a6fcb8d0bcd88d848785a3dbe3978d1568274", "parents": [ "e58b1253f1e850b4469964d7b92cf230196223c0" ], "author": { "name": "Zhu Yi", "email": "yi.zhu@intel.com", "time": "Mon Mar 29 17:35:07 2010 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 31 14:39:34 2010 -0400" }, "message": "mac80211: support paged rx SKBs\n\nMac80211 drivers can now pass paged SKBs to mac80211 via\nieee80211_rx{_irqsafe}. The implementation currently use\nskb_linearize() in a few places i.e. management frame\nhandling, software decryption, defragmentation and A-MSDU\nprocess. We will optimize them one by one later.\n\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nCc: Kalle Valo \u003ckalle.valo@iki.fi\u003e\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "55f98938b5cea8949077c79813c4f86ef0018858", "tree": "41cd00bc85a26387eadd831b9770ac59d10286a4", "parents": [ "d28667f871991e0eea983b398421b8db2c8bdf8c" ], "author": { "name": "Frans Pop", "email": "elendil@planet.nl", "time": "Wed Mar 24 19:46:29 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 31 14:38:51 2010 -0400" }, "message": "wireless: remove trailing space in messages\n\nAlso correct indentation in net/wireless/reg.c.\n\nSigned-off-by: Frans Pop \u003celendil@planet.nl\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "368d06f5b0eefcbf37d677d3b65381310a251f03", "tree": "e8e05e1e6a34583f31203c29c03dcf9f6c036aeb", "parents": [ "c8406ea8fa1adde8dc5400127281d497bbcdb84a" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 16 15:40:59 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 30 15:37:20 2010 -0400" }, "message": "wireless: convert reg_regdb_search_lock to mutex\n\nStanse discovered that kmalloc is being called with GFP_KERNEL while\nholding this spinlock. The spinlock can be a mutex instead, which also\nenables the removal of the unlock/lock around the lock/unlock of\ncfg80211_mutex and the call to set_regdom.\n\nReported-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d6dc1a386358979e12366d1f35eeb68fc181e101", "tree": "4b65ba21328d6984d008b62795dd60d99c350632", "parents": [ "921ca03c8f8e982f27fc406bc301caf2196b99f7" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Tue Mar 23 09:02:33 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 24 16:02:37 2010 -0400" }, "message": "cfg80211: Add connection quality monitoring support to nl80211\n\nAdd support for basic configuration of a connection quality monitoring to the\nnl80211 interface, and basic support for notifying about triggered monitoring\nevents.\n\nVia this interface a user-space connection manager may configure and receive\npre-warning events of deteriorating WLAN connection quality, and start\npreparing for roaming in advance, before the connection is already lost.\n\nAn example usage of such a trigger is starting scanning for nearby AP\u0027s in\nan attempt to find one with better connection quality, and associate to it\nbefore the connection characteristics of the existing connection become too bad\nor the association is even lost, leading in a prolonged delay in connectivity.\n\nThe interface currently supports only RSSI, but it could be later extended\nto include other parameters, such as signal-to-noise ratio, if need for that\narises.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "76326f1d4c98fe01daf363e3d07f84bafed1feec", "tree": "e0c18237d1e8c65e4ae6331c28498a82c54ef095", "parents": [ "44608f801283f0f69d8a04d9976837748e410084" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Thu Mar 18 18:29:36 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 23 16:50:27 2010 -0400" }, "message": "net/wireless/wext-core.c: Use IW_EVENT_IDX macro\n\nThere\u0027s a wireless.h macro for this, might as well use it.\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "44608f801283f0f69d8a04d9976837748e410084", "tree": "450201e2cdeb5fea1a7e0af8b88e5eb85efa5101", "parents": [ "2ae2332ed11687325096e68e326ec57f0294cff9" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Thu Mar 18 18:29:35 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 23 16:50:27 2010 -0400" }, "message": "net/wireless/wext_core.c: Use IW_IOCTL_IDX macro\n\nThere\u0027s a wireless.h macro for this, might as well use it.\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "19bc291c99f018bd4f2c38bbf69144086dca903f", "tree": "9d3cf9bc0c5a78e363dc0547da8bcd1e7c394265", "parents": [ "04488734806948624dabc4514f96f14cd75b9a50", "4a6967b88af02eebeedfbb91bc09160750225bb5" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Feb 25 23:26:21 2010 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Feb 25 23:26:21 2010 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-core.h\n\tdrivers/net/wireless/rt2x00/rt2800pci.c\n" }, { "commit": "ffb9eb3d8b450c22bbbc688c6b630141ac476fd9", "tree": "0e9677ea9df5b86fedf814236bf049a0f0435f6a", "parents": [ "088ea189c4c75cdf211146faa4b341a0f7476be6" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Wed Feb 17 17:58:10 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 19 15:52:40 2010 -0500" }, "message": "nl80211: add power save commands\n\nThe most needed command from nl80211, which Wireless Extensions had,\nis support for power save mode. Add a simple command to make it possible\nto enable and disable power save via nl80211.\n\nI was also planning about extending the interface, for example adding the\ntimeout value, but after thinking more about this I decided not to do it.\nBasically there were three reasons:\n\nFirstly, the parameters for power save are very much hardware dependent.\nTrying to find a unified interface which would work with all hardware, and\nstill make sense to users, will be very difficult.\n\nSecondly, IEEE 802.11 power save implementation in Linux is still in state\nof flux. We have a long way to still to go and there is no way to predict\nwhat kind of implementation we will have after few years. And because we\nneed to support nl80211 interface a long time, practically forever, adding\nnow parameters to nl80211 might create maintenance problems later on.\n\nThird issue are the users. Power save parameters are mostly used for\ndebugging, so debugfs is better, more flexible, interface for this.\nFor example, wpa_supplicant currently doesn\u0027t configure anything related\nto power save mode. It\u0027s better to strive that kernel can automatically\noptimise the power save parameters, like with help of pm qos network\nand other traffic parameters.\n\nLater on, when we have better understanding of power save, we can extend\nthis command with more features, if there\u0027s a need for that.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b54452b07a7b1b8cc1385edba3ef2ef6d4679d5a", "tree": "c8a7271b14c4cd9e0dc22a5d0a3bed9e79c88e36", "parents": [ "3ffe533c87281b68d469b279ff3a5056f9c75862" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@gmail.com", "time": "Thu Feb 18 08:14:31 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Feb 18 14:30:18 2010 -0800" }, "message": "const: struct nla_policy\n\nMake remaining netlink policies as const.\nFixup coding style where needed.\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "026331c4d9b526561ea96f95fac4bfc52b69e316", "tree": "a82b0a92a7f03a1d151a9db123320689c73d98c7", "parents": [ "8404080568613d93ad7cf0a16dfb68459b42a264" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Mon Feb 15 12:53:10 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 15 16:14:15 2010 -0500" }, "message": "cfg80211/mac80211: allow registering for and sending action frames\n\nThis implements a new command to register for action frames\nthat userspace wants to handle instead of the in-kernel\nrejection. It is then responsible for rejecting ones that\nit decided not to handle. There is no unregistration, but\nthe socket can be closed for that.\n\nFrames that are not registered for will not be forwarded\nto userspace and will be rejected by the kernel, the\ncfg80211 API helps implementing that.\n\nAdditionally, this patch adds a new command that allows\ndoing action frame transmission from userspace. It can be\nused either to exchange action frames on the current\noperational channel (e.g., with the AP with which we are\ncurrently associated) or to exchange off-channel Public\nAction frames with the remain-on-channel command.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0e956c132f822d414a4ce84726ac1d1294364581", "tree": "f5c0d031606d3aa4abb6ac2468ce5263d1e17993", "parents": [ "2f5265e6e785b2a666dd985ea157bc8c260be8fa" ], "author": { "name": "Thadeu Lima de Souza Cascardo", "email": "cascardo@holoscopio.com", "time": "Fri Feb 12 12:34:50 2010 -0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 15 16:12:52 2010 -0500" }, "message": "nl80211: does not allow NEW_STATION and DEL_STATION for mesh\n\nAs discussed in linux-wireless mailing list, adding and removing\nstations for mesh topologies is not necessary. Since doing it triggers\nbugs, the sugestion was to simply disable it.\n\nTested using a custom iw command \"station new\". Works only after using\nhostapd. \"station del\" command also works.\n\nSigned-off-by: Thadeu Lima de Souza Cascardo \u003ccascardo@holoscopio.com\u003e\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Simon Raffeiner \u003csturmflut@lieberbiber.de\u003e\nCc: Andrey Yurovsky \u003candrey@cozybit.com\u003e\nCc: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f6f223039c0d0683bdea1eabd35b309e10311a60", "tree": "890e07acf8c18ddc2994ebc0a0bdcdda38b0dcc6", "parents": [ "b3b3f04fb587ecb61b5baa6c1c5f0e666fd12d73", "42c4568a4ace0adc27a9d6f02936e2047ba6fc7e" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Feb 14 17:45:59 2010 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Feb 14 17:45:59 2010 -0800" }, "message": "Merge branch \u0027master\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "33e5a2f776e331dc8a4379b6efb660d38f182d96", "tree": "8d89bc3f70063bec4d85d76dc5887cea19da064d", "parents": [ "690680360cd22b55235481ca3421a3450a96138a" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Feb 03 10:24:30 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 08 16:50:53 2010 -0500" }, "message": "wireless: update radiotap parser\n\nUpstream radiotap has adopted the namespace\nproposal David Young made and I then took care\nof, for which I had adapted the radiotap parser\nas a library outside the kernel. This brings\nthe in-kernel parser up to speed.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "10be7eb36b93364b98688831ee7d26f58402bb96", "tree": "eb13ae80fcaa8baacd804a721c5a4962a501a2a4", "parents": [ "90c30335a70e96b8b8493b7deb15e6b30e6d9fce", "5ffaf8a361b4c9025963959a744f21d8173c7669" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Feb 04 08:58:14 2010 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Feb 04 08:58:14 2010 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "299af9d3db0fd3a4994e5e66717ecd276bdd60da", "tree": "d0bdc0bc294e8e202d58513b691ad858b89865c0", "parents": [ "d0833a6a2dbc169aba3abcc0904e5aea348bb4d3" ], "author": { "name": "Andriy Tkachuk", "email": "andrit@ukr.net", "time": "Tue Feb 02 16:33:53 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Feb 02 16:03:38 2010 -0500" }, "message": "lib80211: Introduce TKIP_HDR_LEN define for code clarity\n\nIntroduce TKIP_HDR_LEN define for code clarity (in the same way as\nCCMP_HDR_LEN).\n\nAlso odd len variable (not used) dropped from lib80211_tkip_hdr().\n\nSigned-off-by: Andriy V. Tkachuk \u003candrit@ukr.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d0833a6a2dbc169aba3abcc0904e5aea348bb4d3", "tree": "f62a428f00957cc5c2ba0a6d70579ed64e7d647f", "parents": [ "ab5132a26236e308c6d3d832a3e04fca351656d8" ], "author": { "name": "Andriy Tkachuk", "email": "andrit@ukr.net", "time": "Tue Feb 02 15:58:53 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Feb 02 16:03:38 2010 -0500" }, "message": "lib80211: Cosmetics - make room for MIC/CRC near the actual calculation\n\nSigned-off-by: Andriy V. Tkachuk \u003candrit@ukr.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "09d989d179d0c679043556dda77c51b41a2dae7e", "tree": "6dcf9bf260e401aa341cb0f34c1e35690d6bb17b", "parents": [ "a2bff2694b02448e1d5873ac010582bc9898021c" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Fri Jan 29 19:58:57 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 01 15:40:06 2010 -0500" }, "message": "cfg80211: add regulatory hint disconnect support\n\nThis adds a new regulatory hint to be used when we know all\ndevices have been disconnected and idle. This can happen\nwhen we suspend, for instance. When we disconnect we can\nno longer assume the same regulatory rules learned from\na country IE or beacon hints are applicable so restore\nregulatory settings to an initial state.\n\nSince driver hints are cached on the wiphy that called\nthe hint, those hints are not reproduced onto cfg80211\nas the wiphy will respect its own wiphy-\u003eregd regardless.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a2bff2694b02448e1d5873ac010582bc9898021c", "tree": "fb6b47583e6ef4f301097f5b4501e3b1eb511e06", "parents": [ "ef5127a4d256b9c0f47caae6cdc8ccfceedb09f9" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Fri Jan 29 19:58:56 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 01 15:40:05 2010 -0500" }, "message": "cfg80211: avoid flushing the global workqueue for core reg hints\n\nWhen cfg80211 starts it will send a core regulatory hint. This is\nsent to the global workqueue but we force processing of it by\nflushing the global workqueue. The flushing was done since\ncfg80211 needs last_request to always be populated.\n\nAvoid flushing the global workqueue by processing the work\nrequired immediately instead of putting it into a linked\nlist and processing it after the flush.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "54233261d5aa2926f080b67ac22f508c9f15e690", "tree": "6eb14f69d5c5d3257768cac56a2935f87886eb42", "parents": [ "22e16e55e36ab91148592c9bf0f2444bf766cd3c" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jan 27 09:44:48 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jan 27 15:02:09 2010 -0500" }, "message": "cfg80211: fix wext-compat for setting rate to \u0027auto\u0027\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c21dbf9214bce129f92e1af05552553ff0e318ed", "tree": "23f57010f34fc26ecf1d349a118f977afea418e4", "parents": [ "18c949070b57d2cbcc0b25c5cfa003ece204e468" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jan 26 14:15:46 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 26 11:53:20 2010 -0500" }, "message": "cfg80211: export cfg80211_find_ie\n\nThis new function (previously a static function\ncalled just \"find_ie\" can be used to find a\nspecific IE in a buffer of IEs.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "51c24aaacaea90c8e87f1dec75a2ac7622b593f8", "tree": "9f54936c87764bef75e97395cb56b7d1e0df24c6", "parents": [ "4276e47e2d1c85a2477caf0d22b91c4f2377fba8", "6be325719b3e54624397e413efd4b33a997e55a3" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Jan 23 00:31:06 2010 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Jan 23 00:31:06 2010 -0800" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n" }, { "commit": "d0dd2de0d055f0ffb1e2ecdc21380de9d12a85e2", "tree": "cb3d3e77e62c22032f0fac4c58e8f304f08f5061", "parents": [ "ef15aac6073b27fd4f70007784d2d52ed394bf43" ], "author": { "name": "Andriy Tkachuk", "email": "andrit@ukr.net", "time": "Wed Jan 20 13:55:06 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 22 16:11:27 2010 -0500" }, "message": "mac80211: Account HT Control field in Data frame hdrlen according to 802.11n-2009\n\nieee80211_hdrlen() should account account new HT Control field in 802.11\ndata frame header introduced by IEEE 802.11n standard.\n\nAccording to 802.11n-2009 HT Control field is present in data frames\nwhen both of following are met:\n\n 1. It is QoS data frame.\n 2. Order bit is set in Frame Control field.\n\nThe change might be totally compatible with legacy non-11n aware frames,\nbecause 802.11-2007 standard states that \"all QoS STAs set this subfield\nto 0\".\n\nSigned-off-by: Andriy V. Tkachuk \u003candrit@ukr.net\u003e\nAcked-by : Benoit Papillault \u003cbenoit.papillault@free.fr\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ef15aac6073b27fd4f70007784d2d52ed394bf43", "tree": "80eeb99e74263e255d4e8af582550a6363ad7884", "parents": [ "b3fbdcf49f940d0703c356441e0daf045e64e076" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jan 20 12:02:33 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 22 16:11:16 2010 -0500" }, "message": "cfg80211: export multiple MAC addresses in sysfs\n\nIf a device has multiple MAC addresses, userspace will\nneed to know about that. Similarly, if it allows the\nMAC addresses to vary by a bitmask.\n\nIf a driver exports multiple addresses, it is assumed\nthat it will be able to deal with that many different\naddresses, which need not necessarily match the ones\nprogrammed into the device; if a mask is set then the\ndevice should deal addresses within that mask based\non an arbitrary \"base address\".\n\nTo test it all and show how it is used, add support\nto hwsim even though it can\u0027t actually deal with\naddresses different from the default.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "27e310c91c3433ab9997b925b3fd65e660634c76", "tree": "dffe44a679ad5fc809b0cbc7c9a86cedc46a7ace", "parents": [ "1625c148cde23a8b4180e171ed4a17e17521b995" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Tue Jan 19 10:53:30 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 19 16:49:35 2010 -0500" }, "message": "nl80211: Allow association to change channels during reassociation\n\nnl80211_associate() was rejecting (re)association attempts with EBUSY\nin some cases where we are currently associated with an AP that uses\ndifferent channel from the destination AP. Fix this by passing the\ncurrent wdev to rdev_fixed_channel() in the same way that was already\ndone for join-IBSS and connect commands. This allows the fixedchan\ncheck to skipped for the current wdev and allows the reassociation to\nproceed.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5f2aa25e0e5b221a176ab3d1c51d51da265cb4a7", "tree": "b991f42ad2f5874b6ac3d8fcb1a138e889d70c19", "parents": [ "c57199bc32ebcd914253496486d2e09b1c9a3de0" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Jan 17 15:49:02 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 19 16:43:09 2010 -0500" }, "message": "cfg80211: rcu-ify rdev and wdev\n\nFuture code will need to look up rdev and wdev\nwithin atomic sections, but currently we need\nto lock a mutex for such lookups. Change the\nlist handling for both to be RCU-safe so that\nwe can look them up in rcu sections instead in\nthe future.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "031cf0e94c9c8302a4592707939d6c2039f17f28", "tree": "02f3f0d3f89f03217bdb83530af30a95c9ab6191", "parents": [ "730dd70549e0ec755dd55615ba5cfc38a482a947", "ad580db50ee8dccd069ffcd76d6f70fa6d4a62a8" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 19 15:58:41 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 19 15:58:41 2010 -0500" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "6373464288cab09bc641be301d8d30fc9f64ba71", "tree": "c1bc92dc630aa15da2e12bc0d09c92169817a702", "parents": [ "6d955180b2f9ccff444df06265160868cabb289a", "730dd70549e0ec755dd55615ba5cfc38a482a947" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 11:43:42 2010 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jan 19 11:43:42 2010 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-core.h\n" }, { "commit": "2c8c1e7297e19bdef3c178c3ea41d898a7716e3e", "tree": "4d336562e8d5379732a0646e17b0bb1750111ef6", "parents": [ "72659ecce68588b74f6c46862c2b4cec137d7a5a" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@gmail.com", "time": "Sun Jan 17 03:35:32 2010 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Jan 17 19:16:02 2010 -0800" }, "message": "net: spread __net_init, __net_exit\n\n__net_init/__net_exit are apparently not going away, so use them\nto full extent.\n\nIn some cases __net_init was removed, because it was called from\n__net_exit code.\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "84920e3e47f654a22b540606fb8c1ab90b870942", "tree": "2df8748b39b9cca53cfd2704487f6183b09d26aa", "parents": [ "93895757df4ebe22c98b9128b98ebf8cec972c60" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Jan 14 20:08:20 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 15 17:02:06 2010 -0500" }, "message": "cfg80211: make regulatory_hint_11d() band specific\n\nIn practice APs do not send country IE channel triplets for channels\nthe AP is not operating on and if they were to do so they would have\nto use the regulatory extension which we currently do not process.\nNo AP has been seen in practice that does this though so just drop\nthose country IEs.\n\nAdditionally it has been noted the first series of country IE\nchannels triplets are specific to the band the AP sends. Propagate\nthe band on which the country IE was found on reject the country\nIE then if the triplets are ever oustide of the band.\n\nAlthough we now won\u0027t process country IE information with multiple\nband information we leave the intersection work as is as it is\ntechnically possible for someone to want to eventually process these\ntype of country IEs with regulatory extensions.\n\nCc: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a0f2e0fca1e72c1de07e834be05b61d33842253e", "tree": "02f1ecd172092dec6dec9a13806daccf3a53b290", "parents": [ "c99445b14054e0c4ed4715df1dad1fc608cbab46" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Jan 14 13:27:46 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 14 18:16:56 2010 -0500" }, "message": "cfg80211: Ingore country IEs with a zero set of number of channels\n\nPrevious to this and the last patch, titled,\n\n\"cfg80211: Fix 2 GHz subband calculation for country IEs\"\n\nwe would end up treating these IEs as single channel units. These are in\nfact just bogus IE triplets so ignore the entire IE if these are found.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e99c7cd57b2481ee36b2338040e3ce1cd17e0763", "tree": "c4571af4478a1b020702b361aec4bd6e34f4ec58", "parents": [ "6021e08db47386507108a475e6c820a7006a4632" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Jan 07 17:24:55 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 14 18:16:53 2010 -0500" }, "message": "cfg80211: fix 2 GHz subband calculation for country IEs\n\nCountry IEs triplets are getting an extra channel with\nthe current count. This does not affect regulatory because\nwe always took the intersection between what the AP gave\nand what CRDA believed is correct.\n\nThis however does fix processing some Country IEs with multiple\nsequential 2 GHz triplets. Since our parser and the spec mandates\nall channels be monitonically increasing we would drop the IE after\nnoticing the second triplet begins on a channel already processed.\nAPs that send these type of country IEs seems rare though.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5f6120335c701ba07d5151206071f4d6ccaa684f", "tree": "cc7270bd3b0b617d4c162721a3adedc648aacab3", "parents": [ "a0e803a2112398150daa4d88c9d58409e0cf0b6c" ], "author": { "name": "Abhijeet Kolekar", "email": "abhijeet.kolekar@intel.com", "time": "Wed Jan 13 13:23:14 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 14 17:14:58 2010 -0500" }, "message": "cfg80211: fix channel setting for wext\n\nPatch fixes the bug at\nhttp://bugzilla.intellinuxwireless.org/show_bug.cgi?id\u003d2139\n\nCurrently we cannot set the channel using wext extension\nif we have already associated and disconnected. As\ncfg80211_mgd_wext_siwfreq will not switch the channel if ssid is set.\nThis fixes it by clearing the ssid.\nFollowing is the sequence which it tries to fix.\nmodprobe iwlagn\niwconfig wlan0 essid \"\"\nifconfig wlan0 down\niwconfig wlan0 chan X\n\nwext is marked as deprecate.If we use nl80211 we can easily play with\nsetting the channel.\n\nSigned-off-by: Abhijeet Kolekar \u003cabhijeet.kolekar@intel.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\ncc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cc5d8a3772ee4e2ed29558ba548b4747959ba971", "tree": "e90b703642d94e4f342e3ff1deba9966e59c4916", "parents": [ "08030db6e5275dda19ea1b3ab8a41c992799db4a" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Jan 07 17:24:57 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:57:58 2010 -0500" }, "message": "cfg80211: Fix country IE parsing for single channel triplets\n\nThis enhances the way we parse country IEs to minimize\nthe number of regulatory rules that we create. It also fixes\nour current implementation which treated country IE triplets\nwith only one channel as one independed regulatory rule even\nthough adjecent rules were also being provided.\n\nWithout this patch APs which send country IE information with\na channel triplet for each individual channel will force cfg80211\nto deny HT40 operation as a regulatory rule would have been created\nindependently for each channel and as such configured only for\n20 MHz operation.\n\nAlthough 802.11n APs which send country IEs triplets in this fassion\nare likely rare Benoit reports this against the Ubiquity NanoStation M5,\nwith Country \"FR\" and HT40 enabled.\n\nSince we now have a helper which parses the triplets in intermediate\nsteps we now take care extra care to process padding.\n\nReported-by: Benoit PAPILLAULT \u003cbenoit.papillault@free.fr\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "08030db6e5275dda19ea1b3ab8a41c992799db4a", "tree": "3487187c4a47d4fbf24e56a5647d37a279287504", "parents": [ "b74d12e116528fadc35f305eb6e9525a3a2b62b1" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Jan 07 17:24:56 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:57:58 2010 -0500" }, "message": "cfg80211: process the max power on a country IE\n\nThe max power from each country IE triplet was being ignored.\nThis fix isn\u0027t critical as CRDA was always being used for the lower\nlimit, but we should process it in case the AP still wants to\ndecrease power output even more for whatever reason.\n\nReported-by: Benoit PAPILLAULT \u003cbenoit.papillault@free.fr\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b74d12e116528fadc35f305eb6e9525a3a2b62b1", "tree": "d5ae133a8d980bfdf4b6c3d7ad59000ca39f6cbf", "parents": [ "81f14df0b3909875902b0253d7059e8a73dd0c7f" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Jan 07 17:24:54 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:57:58 2010 -0500" }, "message": "cfg80211: add debug print when we drop a bogus country IE\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "34a6eddbabd704b3c7dae9362234552267573be2", "tree": "661184452aa597e4f1034561b3ec9b267ad2e196", "parents": [ "80a112ffe8dbada25f3780ecc4beebf23451d755" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Wed Jan 06 16:19:24 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:51:28 2010 -0500" }, "message": "cfg80211: Store IEs from both Beacon and Probe Response frames\n\nStore information elements from Beacon and Probe Response frames in\nseparate buffers to allow both sets to be made available through\nnl80211. This allows user space applications to get access to IEs from\nBeacon frames even if we have received Probe Response frames from the\nBSS. Previously, the IEs from Probe Response frames would have\noverridden the IEs from Beacon frames.\n\nThis feature is of somewhat limited use since most protocols include\nthe same (or extended) information in Probe Response frames. However,\nthere are couple of exceptions where the IEs from Beacon frames could\nbe of some use: TIM IE is only included in Beacon frames (and it would\nbe needed to figure out the DTIM period used in the BSS) and at least\nsome implementations of Wireless Provisioning Services seem to include\nthe full IE only in Beacon frames).\n\nThe new BSS attribute for scan results is added to allow both the IE\nsets to be delivered. This is done in a way that maintains the\npreviously used behavior for applications that are not aware of the\nnew NL80211_BSS_BEACON_IES attribute.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "13ae75b103e07304a34ab40c9136e9f53e06475c", "tree": "61cfd1471cdefe8cf1a3da12b4b99aafc2770f76", "parents": [ "37eb0b164cf9fa9f70c8500926f5cde7c652f48e" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Tue Dec 29 12:59:45 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:51:23 2010 -0500" }, "message": "nl80211: New command for setting TX rate mask for rate control\n\nAdd a new NL80211_CMD_SET_TX_BITRATE_MASK command and related\nattributes to provide support for setting TX rate mask for rate\ncontrol. This uses the existing cfg80211 set_bitrate_mask operation\nthat was previously used only with WEXT compat code (SIOCSIWRATE). The\nnl80211 command allows more generic configuration of allowed rates as\na mask instead of fixed/max rate.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "37eb0b164cf9fa9f70c8500926f5cde7c652f48e", "tree": "9260e7045f32268c8c4ded718677711d371cd5ed", "parents": [ "e00cfce0cb2a397859607bf515c6de9ce064b64a" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed Jan 06 13:09:08 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:50:11 2010 -0500" }, "message": "cfg80211/mac80211: Use more generic bitrate mask for rate control\n\nExtend struct cfg80211_bitrate_mask to actually use a bitfield mask\ninstead of just a single fixed or maximum rate index. This change\nitself does not modify the behavior (except for debugfs files), but it\nprepares cfg80211 and mac80211 for a new nl80211 command for setting\nwhich rates can be used in TX rate control.\n\nSince frames are now going through the rate control algorithm\nunconditionally, the internal IEEE80211_TX_INTFL_RCALGO flag can now\nbe removed. The RC implementations can use the rate_idx_mask value to\noptimize their behavior if only a single rate is enabled.\n\nThe old max_rate_idx in struct ieee80211_tx_rate_control is maintained\n(but commented as deprecated) for backwards compatibility with existing\nRC implementations. Once these implementations have been updated to\nuse the more generic rate_idx_mask, the max_rate_idx value can be\nremoved.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "81077e82c3f591578625805dd6464a27a9ff56ec", "tree": "cb1e502c54b4e2f052f129b80a47190de7e22b62", "parents": [ "14acdde6e527950f66c084dbf19bad6fbfcaeedc" ], "author": { "name": "Lukáš Turek", "email": "8an@praha12.net", "time": "Mon Dec 21 22:50:47 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 12 13:49:17 2010 -0500" }, "message": "nl80211: Add new WIPHY attribute COVERAGE_CLASS\n\nThe new attribute NL80211_ATTR_WIPHY_COVERAGE_CLASS sets IEEE 802.11\nCoverage Class, which depends on maximum distance of nodes in a\nwireless network. It\u0027s required for long distance links (more than a few\nhundred meters).\n\nThe attribute is now ignored by two non-mac80211 drivers, rndis and\niwmc3200wifi, together with WIPHY_PARAM_RETRY_SHORT and\nWIPHY_PARAM_RETRY_LONG. If it turns out to be a problem, we could split\nset_wiphy_params callback or add new capability bits.\n\nSigned-off-by: Lukas Turek \u003c8an@praha12.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8c5d9808e95739c9001b852464fd58fd0f583280", "tree": "b784444a3f86577b41cb30723f2aebd8dfc2eb0b", "parents": [ "193e70ef65a6c33f2935ce1f4adeb08ecb9202cf" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Jan 11 16:14:57 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jan 11 19:37:09 2010 -0500" }, "message": "cfg80211: fix refcount imbalance when wext is disabled\n\nWhen CONFIG_CFG80211_WEXT is not set, there is\na refcount imbalance with rdev-\u003eopencount, fix\nthat by moving it out of the ifdef.\n\nReported-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8271195e38d01f3551bb10b1c7de856cd8507882", "tree": "c399127301b70407350df666c5667b0e62c58fcf", "parents": [ "4f9b2a7dea2bf1dd81f280aa5e8a40ed910d2f0a" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 05 17:57:20 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 05 17:58:07 2010 -0500" }, "message": "wireless: fix build breakage when CONFIG_CFG80211_REG_DEBUG not set\n\nBad macro definition in \"cfg80211: add a regulatory debug print\"...\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4f9b2a7dea2bf1dd81f280aa5e8a40ed910d2f0a", "tree": "52046049957a87103a383869155f43461963f089", "parents": [ "f3f66b69c8ff08b46975d9e99c7ecb92a8b12eda", "7a4a77b7771164d61ce702a588067d1e1d66db7c" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 05 17:18:59 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 05 17:18:59 2010 -0500" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tnet/mac80211/iface.c\n" }, { "commit": "4113f75187bfebccc54bf13c0ed09593023b53ca", "tree": "fe97cbde83d504192fa0d44954aaec03071d4baf", "parents": [ "6976b665fc2b19900659b964bba3b55de08f264f" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Mon Jan 04 11:50:11 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 05 17:13:19 2010 -0500" }, "message": "cfg80211: add a regulatory debug print\n\nInstead of sprinkling code with ifdef\u0027s define REG_DBG_PRINT() instead.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e12822e1d3fface0d9e1095c5177e10141bd6bd6", "tree": "1be66e78c512135aa525b3dacc9d31f193b246f5", "parents": [ "359207c687cc8f4f9845c8dadd0d6dabad44e584" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Mon Jan 04 11:37:39 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jan 04 16:12:00 2010 -0500" }, "message": "cfg80211: fix syntax error on user regulatory hints\n\nThis fixes a syntax error when setting up the user regulatory\nhint. This change yields the same exact binary object though\nso it ends up just being a syntax typo fix, fortunately.\n\nCc: stable@kernel.org\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3a999e6eb5d277cd6a321dcda3fc43c3d9e4e4b8", "tree": "b0ad8d03710ee556e97515ba1c949233859391ce", "parents": [ "6cd9b49d7328c4656bfc17fcb47fb814955d40d2", "891dc5e73783eeabd2a704a9425e2a199b39c9f9" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Dec 30 13:51:29 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Dec 30 13:51:29 2009 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "891dc5e73783eeabd2a704a9425e2a199b39c9f9", "tree": "9b4478941c486d47a71bfce455b896c5dda7e811", "parents": [ "e1781ed33a8809c58ad6c3b6d432d656446efa43", "55afc80b2ab100618c17af77915f75307b6bd5d1" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 30 15:25:08 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 30 15:25:08 2009 -0500" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tdrivers/net/wireless/libertas/scan.c\n" }, { "commit": "98b6218388e345064c3f2d3c161383a18274c638", "tree": "3df881c8e15947aeefe31da7fa83980a1530aed3", "parents": [ "e4da8c37af626001ff704fb29ea14eb58f5f7208" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 23 13:15:44 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:55:06 2009 -0500" }, "message": "mac80211/cfg80211: add station events\n\nWhen, for instance, a new IBSS peer is found, userspace\nwants to be notified. Add events for all new stations\nthat mac80211 learns about.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9588bbd5529461a3dacd435bf239c84c3508f569", "tree": "dd00011714bdefdef1f818ac7caf53682253a515", "parents": [ "b203ffc3a447eb8d9e6120b783ddee081b143061" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed Dec 23 13:15:41 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:55:02 2009 -0500" }, "message": "cfg80211: add remain-on-channel command\n\nAdd new commands for requesting the driver to remain awake\non a specified channel for the specified amount of time\n(and another command to cancel such an operation). This\ncan be used to implement userspace-controlled off-channel\noperations, like Public Action frame exchange on another\nchannel than the operation channel.\n\nThe off-channel operation should behave similarly to scan,\ni.e. the local station (if associated) moves into power\nsave mode to request the AP to buffer frames for it and\nthen moves to the other channel to allow the off-channel\noperation to be completed. The duration parameter can be\nused to request enough time to receive a response from\nthe target station.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "baeb66fe2306783e3b9a492b03882f2e249b2eeb", "tree": "9c904289cf3a3cd5a538f46a4413090c4b277cb9", "parents": [ "8f648c00039a42e67a9dff034c77d41502dab1f3" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 18 17:59:02 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:31:37 2009 -0500" }, "message": "wireless: remove CONFIG_WIRELESS_OLD_REGULATORY\n\nThis is no longer needed with the availability of\nCONFIG_CFG80211_INTERNAL_REGDB.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "65486c8b30498dd274eea2c542696f22b63fe5b8", "tree": "4bcbeb24ce1655c275f2e1780cacefaf2b306781", "parents": [ "befabac2d8e4925b97c5eebc78ecc4b2079fd9dd" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 23 15:33:35 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:19:58 2009 -0500" }, "message": "cfg80211: fix error path in cfg80211_wext_siwscan\n\nIf there\u0027s an invalid channel or SSID, the code leaks\nthe scan request. Always free the scan request, unless\nit was successfully given to the driver.\n\nReported-by: Dan Carpenter \u003cerror27@gmail.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Dan Carpenter \u003cerror27@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3bdb2d48c5f58c781a4099c99044384a23620884", "tree": "055d3730d54c5f07716813bf144505f98880bc42", "parents": [ "671adc93b6472eaa0142a88d096c945f7b07893a" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 23 13:12:05 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 16:19:54 2009 -0500" }, "message": "cfg80211: fix race between deauth and assoc response\n\nJoseph Nahmias reported, in http://bugs.debian.org/562016,\nthat he was getting the following warning (with some log\naround the issue):\n\n ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1)\n ath0: direct probe responded\n ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1)\n ath0: authenticated\n ath0: associate with AP 00:11:95:77:e0:b0 (try 1)\n ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason\u003d3)\n ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1)\n ath0: RX AssocResp from 00:11:95:77:e0:b0 (capab\u003d0x421 status\u003d0 aid\u003d2)\n ath0: associated\n ------------[ cut here ]------------\n WARNING: at net/wireless/mlme.c:97 cfg80211_send_rx_assoc+0x14d/0x152 [cfg80211]()\n Hardware name: 7658CTO\n ...\n Pid: 761, comm: phy0 Not tainted 2.6.32-trunk-686 #1\n Call Trace:\n [\u003cc1030a5d\u003e] ? warn_slowpath_common+0x5e/0x8a\n [\u003cc1030a93\u003e] ? warn_slowpath_null+0xa/0xc\n [\u003cf86cafc7\u003e] ? cfg80211_send_rx_assoc+0x14d/0x152\n ...\n ath0: link becomes ready\n ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason\u003d3)\n ath0: no IPv6 routers present\n ath0: link is not ready\n ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1)\n ath0: direct probe responded\n ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1)\n ath0: authenticated\n ath0: associate with AP 00:11:95:77:e0:b0 (try 1)\n ath0: RX ReassocResp from 00:11:95:77:e0:b0 (capab\u003d0x421 status\u003d0 aid\u003d2)\n ath0: associated\n\nIt is not clear to me how the first \"direct probe\" here\nhappens, but this seems to be a race condition, if the\nuser requests to deauth after requesting assoc, but before\nthe assoc response is received. In that case, it may\nhappen that mac80211 tries to report the assoc success to\ncfg80211, but gets blocked on the wdev lock that is held\nbecause the user is requesting the deauth.\n\nThe result is that we run into a warning. This is mostly\nharmless, but maybe cause an unexpected event to be sent\nto userspace; we\u0027d send an assoc success event although\nuserspace was no longer expecting that.\n\nTo fix this, remove the warning and check whether the\nrace happened and in that case abort processing.\n\nReported-by: Joseph Nahmias \u003cjoe@nahmias.net\u003e\nCc: stable@kernel.org\nCc: 562016-quiet@bugs.debian.org\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea1e4b842049fcc4741096538114871a74859314", "tree": "c2336ab480ac0fd62e0dc41b391d99c97158dc9c", "parents": [ "b6ce5c33001b1dc83e6a1a6f30c5dccccea651b6", "92c6f8d849178582fc527aaf1e51dd37a74767d3" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 15:09:11 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 28 15:09:11 2009 -0500" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "f83d664eef180478c2dc0a0099e9d7bc1c8177ff", "tree": "e4f23b1bc7844fbf00598e20461d2655a3a51685", "parents": [ "d346f49d0badd80aa9fc699fa9c6d5b23e778eb6" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 25 16:35:43 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Dec 25 16:35:43 2009 -0800" }, "message": "wireless: fix comments in genregdb.awk\n\nApparently some awk versions choke on C-style comments -- who knew? :-)\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d346f49d0badd80aa9fc699fa9c6d5b23e778eb6", "tree": "9e9698ffe7966fbe7ce924a30843f87cdfa2646e", "parents": [ "d87fd25d5ac4cd044e21b749a8f6cac90f093c71", "b6ce5c33001b1dc83e6a1a6f30c5dccccea651b6" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Dec 25 16:34:56 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Dec 25 16:34:56 2009 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "5fba4af32ceeb935b3926714df9a64a33c2c9cf5", "tree": "0f9fe83dade3dfd394bfecd2b675e4e600ec350b", "parents": [ "f38fd12fa7b7b98e158a9b31d388da34eef25c22" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 02 12:43:42 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 22 13:31:17 2009 -0500" }, "message": "cfg80211: avoid sending spurious deauth to userspace\n\nBefore\n commit ca9034592823e8179511e48a78731f95bfdd766c\n Author: Holger Schurig \u003chs4233@mail.mn-solutions.de\u003e\n Date: Tue Oct 13 13:45:28 2009 +0200\n\n cfg80211: remove warning in deauth case\n\nwe assumed that drivers never give us spurious deauth\nframes because they filter them out based on the auth\nstate they keep track of. This turned out to be racy,\nbecause userspace might deauth while the AP is also\nsending a deauth frame, so the warning was removed.\n\nHowever, in that case we should not tell userspace\nabout the AP\u0027s frame if it requested deauth \"first\",\nwhere \"first\" means it came to cfg80211 first.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eaf85ca7fecb218fc41ff57c1642ca73b097aabb", "tree": "ad7965715f0cd67fe8946980ae2d1e9f3ea231a1", "parents": [ "ca99861d5421c91f5a8fd3a77acb4b7be14f119d" ], "author": { "name": "Zhu Yi", "email": "yi.zhu@intel.com", "time": "Tue Dec 01 10:18:37 2009 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 22 13:31:15 2009 -0500" }, "message": "wireless: add ieee80211_amsdu_to_8023s\n\nMove the A-MSDU handling code from mac80211 to cfg80211 so that more\ndrivers can use it. The new created function ieee80211_amsdu_to_8023s\nconverts an A-MSDU frame to a list of 802.3 frames.\n\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3b377ea9d4efc94dc52fe41b4dfdb463635ab298", "tree": "76724e77913096c03f6b216573d4a24ce13fe7c3", "parents": [ "59d9cb071d6209f2e8df2d16228cfdc7bab1f2d1" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 18 17:59:01 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 21 18:56:10 2009 -0500" }, "message": "wireless: support internal statically compiled regulatory database\n\nThis patch provides infrastructure for machine translation of the\nregulatory rules database used by CRDA into a C data structure.\nIt includes code for searching that database as an alternative\nto dynamic regulatory rules updates via CRDA. Most people should\nuse CRDA instead of this infrastructure, but it provides a better\nalternative than the WIRELESS_OLD_REGULATORY infrastructure (which\ncan now be removed).\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "254416aae70ab2e6b57fd79782c8a67196234d02", "tree": "e28d54d1514634b591b54296b35bb9029e7b5a9c", "parents": [ "a252e749f1ae17e43ccc5824f7b1b5854417c98b" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 09 16:43:52 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 21 11:27:31 2009 -0500" }, "message": "wireless: report reasonable bitrate for MCS rates through wext\n\nPreviously, cfg80211 had reported \"0\" for MCS (i.e. 802.11n) bitrates\nthrough the wireless extensions interface. However, nl80211 was\nconverting MCS rates into a reasonable bitrate number. This patch moves\nthe nl80211 code to cfg80211 where it is now shared between both the\nnl80211 interface and the wireless extensions interface.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "65182b9fb004220f250d4269c864cf0f1f372e85", "tree": "e5adad187645a03b9acc523296be9d0fc4f4a1eb", "parents": [ "7b324d28a94dac5a451e8cba66e8d324601e5b9a" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 09 15:11:22 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 10 16:21:51 2009 -0500" }, "message": "wireless: update old static regulatory domain rules\n\nUpdate \"US\" and \"JP\" for current rules, and replace \"EU\" rules with the\nworld roaming domain (since it was only a pseudo-domain anyway).\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d55fb891f9da8ee17374349ff482b2715623b7e5", "tree": "2013400579647e4d20b737077647cb6d066a7d67", "parents": [ "43de004b6c197b0ea408bdebf4f14afdead74b63" ], "author": { "name": "Vivek Natarajan", "email": "vnatarajan@atheros.com", "time": "Tue Nov 24 11:54:10 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 09 15:10:08 2009 -0500" }, "message": "cfg80211: Clear encryption privacy when key off is done.\n\nWhen the current_bss is not set, \u0027iwconfig \u003ciface\u003e key off\u0027 does not\nclear the private flag. Hence after we connect with WEP to an AP and\nthen try to connect with another non-WEP AP, it does not work.\nThis issue will not be seen if supplicant is used.\n\nSigned-off-by: Vivek Natarajan \u003cvnatarajan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8f56874bd7e8bee73ed6a1cf80dcec2753616262", "tree": "aebd15dea662ef5efd89402b8fd92fec540a98eb", "parents": [ "47e1c323069bcef0acb8a2b48921688573f5ca63", "159bcfeb9123c91f0dc885a42b6387a98192f896" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Dec 04 13:25:15 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Dec 04 13:25:15 2009 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "269ac5fd2d75b118d76a2291e28796527db2f3f8", "tree": "b3cea2ec5e14febc9595f4733ec77bda32ad8601", "parents": [ "6646a664e3b60bf3e5db676e0626e6ccd71b3363" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Tue Dec 01 10:47:15 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 04 14:16:24 2009 -0500" }, "message": "cfg80211: indent regulatory messages with spaces\n\nThe regulatory messages in syslog look weird:\n\nkernel: cfg80211: Regulatory domain: US\nkernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)\nkernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)\nkernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)\nkernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)\nkernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)\nkernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)\nkernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)\n\nIndent them with four spaces instead of the tab character to get prettier\noutput.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nAcked: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1014eb6ec95b18f890101e99385f05539c0c2f01", "tree": "6ef0eb2946e197b93fd317993fc1fc61aadd27e0", "parents": [ "316a4d966cae3c2dec83ebb1ee1a3515f97b30ff" ], "author": { "name": "Jean Tourrilhes", "email": "jt@hpl.hp.com", "time": "Tue Nov 24 10:47:08 2009 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 04 13:30:39 2009 -0500" }, "message": "WE: Fix set events not propagated\n\nI\u0027ve just noticed that some events are no longer propagated\nfor some wireless drivers. Basically, SET request with a extra payload\nfor driver without commit handler. The fix is pretty simple, see\nattached.\n\tActually, a few lines below this line, you will see that the\nevent generation for simple SET (iwpoint-less ?) is done properly,\nand this other event generation does not need fixing.\n\nSigned-off-by: Jean Tourrilhes \u003cjt@hpl.hp.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f64f9e719261a87818dd192a3a2352e5b20fbd0f", "tree": "b2d5cbaef3df615295f6061d8c4d6a912690556c", "parents": [ "152b6a62aea2d43359dd37004e9c218bf7bdeb3b" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Sun Nov 29 16:55:45 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Nov 29 16:55:45 2009 -0800" }, "message": "net: Move \u0026\u0026 and || to end of previous line\n\nNot including net/atm/\n\nCompiled tested x86 allyesconfig only\nAdded a \u003e 80 column line or two, which I ignored.\nExisting checkpatch plaints willfully, cheerfully ignored.\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2944b2c2d2dd884c550163c698577132588277d8", "tree": "5acf5a49af2a438c4085d6a8a1056670f114c25b", "parents": [ "67fbb16be69d138a3b6645ec5395b487cb915c58" ], "author": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Wed Nov 25 00:01:01 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Sat Nov 28 15:05:06 2009 -0500" }, "message": "cfg80211: Add PMKSA wext compatibility handler\n\nWith the addition of the *_pmksa cfg80211 ops, we can now add the\ncorresponding wireless extensions compatibility handler.\n\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "67fbb16be69d138a3b6645ec5395b487cb915c58", "tree": "8dde9e1c42db515a5703e3bc142279cf2280c9ae", "parents": [ "a830df0714117574fd0d5fe98477059b3e9fd5bf" ], "author": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Tue Nov 24 23:59:15 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Sat Nov 28 15:05:05 2009 -0500" }, "message": "nl80211: PMKSA caching support\n\nThis is an interface to set, delete and flush PMKIDs through nl80211.\nMain users would be fullmac devices which firmwares are capable of\ngenerating the RSN IEs for the re-association requests, e.g. iwmc3200wifi.\n\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e60d7443e00a72a2c056950cdaab79c7b077f3d4", "tree": "0d2376434a0f44ac2b30bba0af3cdcb8e5421c90", "parents": [ "ece1e3c61e59ba184150e5aff57bbc6355613e3e" ], "author": { "name": "Alban Browaeys", "email": "prahal@yahoo.com", "time": "Wed Nov 25 15:13:00 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Sat Nov 28 15:05:00 2009 -0500" }, "message": "wireless : use a dedicated workqueue for cfg80211.\n\nThis patch moves the works cleanup, scan and events to a cfg80211\ndedicated workqueue.\n\nPlatform driver like eeepc-laptop ought to use works to rfkill (as\nnew rfkill does lock in rfkill_unregister and the platform driver is\ncalled from rfkill_switch_all which also lock the same mutex).\nThis raise a new issue in itself that the work scheduled by the platform\ndriver to the global worqueue calls wiphy_unregister which flush_work\nscan and event works (which thus flush works on the global workqueue inside\na work on the global workqueue) and also put on hold the wdev_cleanup_work\n (which prevents the dev_put on netdev thus indefinite Usage count error on\nwifi device).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Alban Browaeys \u003cprahal@yahoo.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4ba3eb034fb6fd1990ccc5a6d71d5abcda37b905", "tree": "0789ba36d96dba330416a1e6a9a68e891a78802a", "parents": [ "35700212b45ea9f98fa682cfc1bc1a67c9ccc34b", "18b6c9a2213d3b6e0212e8b225abf95f7564206a" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Nov 24 15:01:29 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Nov 24 15:01:29 2009 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "a58ce43f2fb17b728395ff530f019ca53c80145f", "tree": "1de5d2680d42de12902ccb85e99bc86f63eebf58", "parents": [ "7351c6bd482712e5e3ec9dffc547de0e0863efb0" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Nov 19 12:45:42 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 19 11:09:02 2009 -0500" }, "message": "mac80211: avoid spurious deauth frames/messages\n\nWith WEXT, it happens frequently that the SME\nrequests an authentication but then deauthenticates\nright away because some new parameters came along.\nEvery time this happens we print a deauth message\nand send a deauth frame, but both of that is rather\nconfusing. Avoid it by aborting the authentication\nprocess silently, and telling cfg80211 about that.\n\nThe patch looks larger than it really is:\n__cfg80211_auth_remove() is split out from\ncfg80211_send_auth_timeout(), there\u0027s no new code\nexcept __cfg80211_auth_canceled() (a one-liner) and\nthe mac80211 bits (7 new lines of code).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ad4bb6f8883a13bb0f65b194dae36c62a02ac779", "tree": "b395936203ac891b9a537c26b4602f727c4387d0", "parents": [ "9bc383de37090ba7ca3ff32a12c9d809dc5867f0" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Nov 19 00:56:30 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 19 11:08:54 2009 -0500" }, "message": "cfg80211: disallow bridging managed/adhoc interfaces\n\nA number of people have tried to add a wireless interface\n(in managed mode) to a bridge and then complained that it\ndoesn\u0027t work. It cannot work, however, because in 802.11\nnetworks all packets need to be acknowledged and as such\nneed to be sent to the right address. Promiscuous doesn\u0027t\nhelp here. The wireless address format used for these\nlinks has only space for three addresses, the\n * transmitter, which must be equal to the sender (origin)\n * receiver (on the wireless medium), which is the AP in\n the case of managed mode\n * the recipient (destination), which is on the APs local\n network segment\n\nIn an IBSS, it is similar, but the receiver and recipient\nmust match and the third address is used as the BSSID.\n\nTo avoid such mistakes in the future, disallow adding a\nwireless interface to a bridge.\n\nFelix has recently added a four-address mode to the AP\nand client side that can be used (after negotiating that\nit is possible, which must happen out-of-band by setting\nup both sides) for bridging, so allow that case.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9bc383de37090ba7ca3ff32a12c9d809dc5867f0", "tree": "2b502b918f585427b45357e5a9a781ea9f06c263", "parents": [ "5be83de54c16944dea9c16c6a5a53c1fa75ed304" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Nov 19 11:55:19 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 19 11:08:53 2009 -0500" }, "message": "cfg80211: introduce capability for 4addr mode\n\nIt\u0027s very likely that not many devices will support\nfour-address mode in station or AP mode so introduce\ncapability bits for both modes, set them in mac80211\nand check them when userspace tries to use the mode.\nAlso, keep track of 4addr in cfg80211 (wireless_dev)\nand not in mac80211 any more. mac80211 can also be\nimproved for the VLAN case by not looking at the\n4addr flag but maintaining the station pointer for\nit correctly. However, keep track of use_4addr for\nstation mode in mac80211 to avoid all the derefs.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5be83de54c16944dea9c16c6a5a53c1fa75ed304", "tree": "dd251d9331a07ec73c7a4992c79ce30f0553db40", "parents": [ "9bd568a50c446433038dec2a5186c5c57c3dbd23" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Nov 19 00:56:28 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 19 11:08:50 2009 -0500" }, "message": "cfg80211: convert bools into flags\n\nWe\u0027ve accumulated a number of options for wiphys\nwhich make more sense as flags as we keep adding\nmore. Convert the existing ones.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3505d1a9fd65e2d3e00827857b6795d9d8983658", "tree": "941cfafdb57c427bb6b7ebf6354ee93b2a3693b5", "parents": [ "dfef948ed2ba69cf041840b5e860d6b4e16fa0b1", "66b00a7c93ec782d118d2c03bd599cfd041e80a1" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Nov 18 22:19:03 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Nov 18 22:19:03 2009 -0800" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/sfc/sfe4001.c\n\tdrivers/net/wireless/libertas/cmd.c\n\tdrivers/staging/Kconfig\n\tdrivers/staging/Makefile\n\tdrivers/staging/rtl8187se/Kconfig\n\tdrivers/staging/rtl8192e/Kconfig\n" }, { "commit": "76aa5e704c80fb7ca8bd3d05593d9a28298c92cd", "tree": "55f00554edb8511cdb9783cc061a142a4b4732c6", "parents": [ "136cfa28615ccce0f9374811480e0b81c4191ea5" ], "author": { "name": "Rui Paulo", "email": "rpaulo@gmail.com", "time": "Wed Nov 18 18:22:59 2009 +0000" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 18 17:09:28 2009 -0500" }, "message": "mac80211: update cfg80211 scan result code for the updated mesh conf IE\n\nSigned-off-by: Rui Paulo \u003crpaulo@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "136cfa28615ccce0f9374811480e0b81c4191ea5", "tree": "9a07d6f316d19f85fd989b17e75d931f907c7d1a", "parents": [ "fe7a5d5c1ad659bf0ec7dc171e122aeefa16ac25" ], "author": { "name": "Rui Paulo", "email": "rpaulo@gmail.com", "time": "Wed Nov 18 18:40:00 2009 +0000" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 18 17:09:27 2009 -0500" }, "message": "mac80211: use a structure to hold the mesh config information element\n\nSigned-off-by: Rui Paulo \u003crpaulo@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "98d3a7ca9232a436c067888936a0133e64ea126a", "tree": "0430f53609c0a7454deec1034af9d5b2660a5e4d", "parents": [ "0bc6b1871c111d8f2eb2ac022a705de4cf21f572" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Nov 18 13:03:43 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 18 17:09:25 2009 -0500" }, "message": "cfg80211: re-join IBSS when privacy changes\n\nWhen going from/to a WEP protected IBSS, we need to\nleave this one and join a new one to take care of\nthe changed capability.\n\nCc: Hong Zhang \u003chenryzhang62@yahoo.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24b6b15f7d07d26330f73057d618089976a08792", "tree": "52bf74ad76afae6fecce3f5ff75dfc027971d9b2", "parents": [ "af65cd96dd4ea8ea5adc6ee850e61a407cd1067a" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Tue Nov 17 21:35:38 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 18 17:09:24 2009 -0500" }, "message": "cfg80211: Allow reassociation in associated state\n\ncfg80211 rejects all association requests when in associated state. This\nprevents clean roaming within an ESS since one would first need to\ndisassociate before being able to request reassociation.\n\nAccept the reassociation request and let the old association to be\ndropped when the new one is completed. This fixes nl80211-based\nroaming with the current snapshot version of wpa_supplicant (that has\ncode for requesting reassociation explicitly withthe previous BSSID\nattribute).\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c258d2de972d1e391a3dec731e0801ed1cc85494", "tree": "ce9dc296a89a02647a31931ddd1d117cf8d6ad94", "parents": [ "f501dba4c4c5bda1b64c941997ab7ece1d503945" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Nov 11 17:23:31 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:59 2009 -0500" }, "message": "nl80211: only allow adding stations to running vlan interfaces\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "61fa713c751683da915fa0c1aa502be85822c357", "tree": "a4f286a2bb59b9afd1f3b836cb62a8e81bafee98", "parents": [ "a043897a314e8bcfc821d54fe4e591efed5936a3" ], "author": { "name": "Holger Schurig", "email": "holgerschurig@gmail.com", "time": "Wed Nov 11 12:25:40 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:58 2009 -0500" }, "message": "cfg80211: return channel noise via survey API\n\nThis patch implements the NL80211_CMD_GET_SURVEY command and an get_survey()\nops that a driver can implement. The goal of this command is to allow a\ndrivers to report channel survey data (e.g. channel noise, channel\noccupation).\n\nFor now, only the mechanism to report back channel noise has been\nimplemented.\n\nIn future, there will either be a survey-trigger command --- or the existing\nscan-trigger command will be enhanced. This will allow user-space to\nrequest survey for arbitrary channels.\n\nNote: any driver that cannot report channel noise should not report\nany value at all, e.g. made-up -92 dBm.\n\nSigned-off-by: Holger Schurig \u003cholgerschurig@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a043897a314e8bcfc821d54fe4e591efed5936a3", "tree": "2abcf1d0626c29920462876bec427fb64fc4729c", "parents": [ "f273fe55e3f3f0b66b7624c0102d3ef44bbdfe6a" ], "author": { "name": "Holger Schurig", "email": "holgerschurig@gmail.com", "time": "Wed Nov 11 11:30:02 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:58 2009 -0500" }, "message": "cfg80211: introduce nl80211_get_ifidx()\n\n... which get\u0027s rid of three indentical cut-n-paste sections.\n\nSigned-off-by: Holger Schurig \u003cholgerschurig@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "63c5723bc3af8d4e86984dd4ff0c78218de418d0", "tree": "fe900ef2a92377c49c6b3124bb5741a1ac04d436", "parents": [ "e304bfd30f356f7b75d30cad0029ecca705fd590" ], "author": { "name": "Rui Paulo", "email": "rpaulo@gmail.com", "time": "Mon Nov 09 23:46:57 2009 +0000" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:57 2009 -0500" }, "message": "mac80211: add nl80211/cfg80211 handling of the new mesh root mode option.\n\nSigned-off-by: Rui Paulo \u003crpaulo@gmail.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nReviewed-by: Andrey Yurovsky \u003candrey@cozybit.com\u003e\nTested-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d19b3bf6384e66ac6e11a61ee31ed2cfe149f4d8", "tree": "2ec825639458dafddecc7e3d0f83afff9cff0cfa", "parents": [ "be125c60e46e165fbfe33db36a4a9d943d560a5b" ], "author": { "name": "Rui Paulo", "email": "rpaulo@gmail.com", "time": "Mon Nov 09 23:46:55 2009 +0000" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 13 17:43:56 2009 -0500" }, "message": "mac80211: replace \"destination\" with \"target\" to follow the spec\n\nResulting object files have the same MD5 as before.\n\nSigned-off-by: Rui Paulo \u003crpaulo@gmail.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nReviewed-by: Andrey Yurovsky \u003candrey@cozybit.com\u003e\nTested-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f14543ee4d0681df1377b976cba704557ba220d3", "tree": "f148485869f6638030207c069742c1918647be6a", "parents": [ "8b787643ca0a5130c647109d77fe512f89cfa611" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Nov 10 20:10:05 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 11 17:02:10 2009 -0500" }, "message": "mac80211: implement support for 4-address frames for AP and client mode\n\nIn some situations it might be useful to run a network with an\nAccess Point and multiple clients, but with each client bridged\nto a network behind it. For this to work, both the client and the\nAP need to transmit 4-address frames, containing both source and\ndestination MAC addresses.\nWith this patch, you can configure a client to communicate using\nonly 4-address frames for data traffic.\nOn the AP side you can enable 4-address frames for individual\nclients by isolating them in separate AP VLANs which are configured\nin 4-address mode.\nSuch an AP VLAN will be limited to one client only, and this client\nwill be used as the destination for all traffic on its interface,\nregardless of the destination MAC address in the packet headers.\nThe advantage of this mode compared to regular WDS mode is that it\u0027s\neasier to configure and does not require a static list of peer MAC\naddresses on any side.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8b787643ca0a5130c647109d77fe512f89cfa611", "tree": "b3b0f74c57843a90f8a3822d37237d637c8dcfd0", "parents": [ "1460dd158a520447b87661aea4afda1997d69cde" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Nov 10 18:53:10 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 11 17:02:07 2009 -0500" }, "message": "nl80211: add a parameter for using 4-address frames on virtual interfaces\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f6d773cd4f3c18c40ab25a5cb92453756237840e", "tree": "5631a6ea4495ae2eb5058fb63b25dea3b197d61b", "parents": [ "d0e1e88d6e7dbd8e1661cb6a058ca30f54ee39e4", "bcb628d579a61d0ab0cac4c6cc8a403de5254920" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 09 11:17:24 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 09 11:17:24 2009 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "230f9bb701d37ae9b48e96456689452978f5c439", "tree": "9d2690917533bbb4498c8c9df838de2d38360912", "parents": [ "000ba2e43f33901859fd794bb33c885909d53b3b", "887e671f324d9898aaedb29a6ece6c853c394067" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Nov 06 00:55:55 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Nov 06 00:55:55 2009 -0800" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/usb/cdc_ether.c\n\nAll CDC ethernet devices of type USB_CLASS_COMM need to use\n\u0027\u0026mbm_info\u0027.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7fdad987d63f02c8fba30276ba395ac8dc93b719", "tree": "06d50ad675b48b9aa9f220d1fba9102b19cac168", "parents": [ "5b9482dda6dda11dc7050ffa5b4ebfb0c775880f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat Oct 31 16:15:39 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 04 18:44:48 2009 -0500" }, "message": "cfg80211: remove dead variable\n\ncommit 211a4d12abf86fe0df4cd68fc6327cbb58f56f81\n Author: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\n Date: Tue Oct 20 15:08:53 2009 +0900\n\n cfg80211: sme: deauthenticate on assoc failure\n\naccidentally introduced a dead variable, I had\nchanged the code to not need it while creating\nthe patch and it looks like I forgot to remove\nthe variable (and nobody else noticed either).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a84216e671c724e0920dfad2fb70828d428ff60a", "tree": "a39f53715c73d267d854653dfe275da5fc60e842", "parents": [ "1836d95928a0f41ada0cbb2a6c4e46b027db9491", "bcfe3c2046fc4f16544f2b127f1b159dd1fcad8b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Nov 03 07:44:01 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Nov 03 07:44:01 2009 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)\n mac80211: check interface is down before type change\n cfg80211: fix NULL ptr deref\n libertas if_usb: Fix crash on 64-bit machines\n mac80211: fix reason code output endianness\n mac80211: fix addba timer\n ath9k: fix misplaced semicolon on rate control\n b43: Fix DMA TX bounce buffer copying\n mac80211: fix BSS leak\n rt73usb.c : more ids\n ipw2200: fix oops on missing firmware\n gre: Fix dev_addr clobbering for gretap\n sky2: set carrier off in probe\n net: fix sk_forward_alloc corruption\n pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card\n r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames\n ibmtr: possible Read buffer overflow?\n net: Fix RPF to work with policy routing\n net: fix kmemcheck annotations\n e1000e: rework disable K1 at 1000Mbps for 82577/82578\n e1000e: config PHY via software after resets\n ...\n" }, { "commit": "584991dccfd347cd2e1675ab262998f6c335d3c0", "tree": "0cb52e1f06e587561f0e06e1beae7de7faaf5528", "parents": [ "6c085227bd7168fd84976479218f81bf35b5acd7" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Nov 02 13:32:03 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 02 15:43:29 2009 -0500" }, "message": "cfg80211: validate scan channels\n\nCurrently it is possible to request a scan on only\ndisabled channels, which could be problematic for\nsome drivers. Reject such scans, and also ignore\ndisabled channels that are given. This resuls in\nthe scan begin/end event only including channels\nthat are actually used.\n\nThis makes the mac80211 check for disabled channels\nsuperfluous. At the same time, remove the no-IBSS\ncheck from mac80211 -- nothing says that we should\nnot find any networks on channels that cannot be\nused for an IBSS, even when operating in IBSS mode.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c5f8289cd9b2e31fca506cb82f4aaa5ffc468602", "tree": "627e250f09c429bfaf4705ca43a18d9d2f2a470d", "parents": [ "93a59d7527147e3656664aa3179f8d19de256081" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Sun Nov 01 11:18:49 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 02 15:43:24 2009 -0500" }, "message": "cfg80211: Fix WEXT compat siwauth wpa and group cipher\n\nNeither of these commands should clear the current configuration value\nif they return error. Furthermore, cfg80211_set_cipher_group() should\nbe able to handle IW_AUTH_CIPHER_NONE without reporting error.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7400f42e9d765fa0656b432f3ab1245f9710f190", "tree": "0ed7c06fb44c0c2b966755c2a0264827b7e100f3", "parents": [ "e9024a059f2c17fb2bfab212ee9d31511d7b8e57" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat Oct 31 07:40:37 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 02 15:14:07 2009 -0500" }, "message": "cfg80211: fix NULL ptr deref\n\ncommit 211a4d12abf86fe0df4cd68fc6327cbb58f56f81\n Author: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\n Date: Tue Oct 20 15:08:53 2009 +0900\n\n cfg80211: sme: deauthenticate on assoc failure\n\nintroduced a potential NULL pointer dereference that\nsome people have been hitting for some reason -- the\nparams.bssid pointer is not guaranteed to be non-NULL\nfor what seems to be a race between various ways of\nreaching the same thing.\n\nWhile I\u0027m trying to analyse the problem more let\u0027s\nfirst fix the crash. I think the real fix may be to\navoid doing _anything_ if it ended up being NULL, but\nright now I\u0027m not sure yet.\n\nI think\nhttp://bugzilla.kernel.org/show_bug.cgi?id\u003d14342\nmight also be this issue.\n\nReported-by: Parag Warudkar \u003cparag.lkml@gmail.com\u003e\nTested-by: Parag Warudkar \u003cparag.lkml@gmail.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7bcfaf2f431c09c51fe776fc06638b25d3b421c5", "tree": "27f767335566826f11f0134b97ee76b58d9bcf90", "parents": [ "2c0d6100da3ee9b0f0cc46add9bb8a8161299a92" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Oct 27 12:59:03 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 30 16:49:18 2009 -0400" }, "message": "cfg80211/mac80211: use debugfs_remove_recursive\n\nWe can save a lot of code and pointers in the structs\nby using debugfs_remove_recursive().\n\nFirst, change cfg80211 to use debugfs_remove_recursive()\nso that drivers do not need to clean up any files they\nadded to the per-wiphy debugfs (if and only if they are\nok to be accessed until after wiphy_unregister!).\n\nThen also make mac80211 use debugfs_remove_recursive()\nwhere necessary -- it need not remove per-wiphy files\nas cfg80211 now removes those, but netdev etc. files\nstill need to be handled but can now be removed without\nneeding struct dentry pointers to all of them.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0519d83d83ed485b5a1f9222ff69d7d6c9bb8a01", "tree": "2e336be8a4bd2e59bcd4b69b00feb77c6672a9cb", "parents": [ "38bfd8f5bec496e8e0db8849e01c99a33479418a", "b5dd884e682cae6b8c037f9d11f3b623b4cf2011" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Oct 29 21:28:59 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Oct 29 21:28:59 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n" }, { "commit": "49b2de8e6febfea5a8791b6476195903af83a35d", "tree": "c93f328623b9429615981d4b7502997fdd0f72b0", "parents": [ "8633322c5fd5b2a986b279f88a7559d8409f7da3", "b5dd884e682cae6b8c037f9d11f3b623b4cf2011" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Oct 29 09:22:08 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Oct 29 09:22:08 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)\n net: Fix \u0027Re: PACKET_TX_RING: packet size is too long\u0027\n netdev: usb: dm9601.c can drive a device not supported yet, add support for it\n qlge: Fix firmware mailbox command timeout.\n qlge: Fix EEH handling.\n AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr-\u003eihl (v2)\n bonding: fix a race condition in calls to slave MII ioctls\n virtio-net: fix data corruption with OOM\n sfc: Set ip_summed correctly for page buffers passed to GRO\n cnic: Fix L2CTX_STATUSB_NUM offset in context memory.\n MAINTAINERS: rt2x00 list is moderated\n airo: Reorder tests, check bounds before element\n mac80211: fix for incorrect sequence number on hostapd injected frames\n libertas spi: fix sparse errors\n mac80211: trivial: fix spelling in mesh_hwmp\n cfg80211: sme: deauthenticate on assoc failure\n mac80211: keep auth state when assoc fails\n mac80211: fix ibss joining\n b43: add \u0027struct b43_wl\u0027 missing declaration\n b43: Fix Bugzilla #14181 and the bug from the previous \u0027fix\u0027\n rt2x00: Fix crypto in TX frame for rt2800usb\n ...\n" }, { "commit": "e0da41b2cf10ae95592cb2496f8f81aa4b4bf16c", "tree": "e8bb61adc3f5f01e61b596056f3608414aea5b45", "parents": [ "ce470613cdfde70f25419cc52a4816315825f5d9" ], "author": { "name": "Holger Schurig", "email": "hs4233@mail.mn-solutions.de", "time": "Tue Oct 13 13:45:28 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 27 16:48:17 2009 -0400" }, "message": "cfg80211: remove warning in deauth case\n\nIt might be the case that __cfg80211_disconnected() has already\ncleaned up wdev-\u003ecurrent_bss() for us. The old code didn\u0027t catch\nthat situation and didn\u0027t warn needlessly.\n\nSigned-off-by: Holger Schurig \u003chs4233@mail.mn-solutions.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ce470613cdfde70f25419cc52a4816315825f5d9", "tree": "0b5d002515bdf4fc34452eb836c57278f27a826b", "parents": [ "b54853f1b157a173fe5ac9145623670c66a9e7b9" ], "author": { "name": "Holger Schurig", "email": "hs4233@mail.mn-solutions.de", "time": "Tue Oct 13 13:28:13 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 27 16:48:16 2009 -0400" }, "message": "cfg80211: no cookies in cfg80211_send_XXX()\n\nGet rid of cookies in cfg80211_send_XXX() functions.\n\nSigned-off-by: Holger Schurig \u003chs4233@mail.mn-solutions.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7d930bc33653d5592dc386a76a38f39c2e962344", "tree": "f974e7f86b0d695ca1ca90095c157bec4f739006", "parents": [ "2ef6e4440926668cfa9eac4b79e63528ebcbe0c1" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Oct 20 15:08:53 2009 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 27 16:29:47 2009 -0400" }, "message": "cfg80211: sme: deauthenticate on assoc failure\n\nWhen the in-kernel SME gets an association failure from\nthe AP we don\u0027t deauthenticate, and thus get into a very\nconfused state which will lead to warnings later on. Fix\nthis by actually deauthenticating when the AP indicates\nan association failure.\n\n(Brought to you by the hacking session at Kernel Summit 2009 in Tokyo,\nJapan. -- JWL)\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "c3da31485f074a6f598b67045b08e2e15d908310" }