)]}' { "log": [ { "commit": "61ad5394590c5c5338ab4ec50553d809a9996d50", "tree": "e10a19ac4a14124ff223c29ed18a97b624e5244b", "parents": [ "3de135dba9341a3d10a7a5b9533ce11cb77d4f4d" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:23:34 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:49:47 2010 -0500" }, "message": "mac80211: Remove unused third address from mesh address extension header.\n\nThe Mesh Control header only includes 0, 1 or 2 addresses. If there is\none address, it should be interpreted as Address 4. If there are 2,\nthey are interpreted as Addresses 5 and 6 (Address 4 being the 4th\naddress in the 802.11 header).\n\nThe address extension used to hold up to 3 addresses instead of the current 2.\nI\u0027m not sure which draft version changed this, but it is very unlikely that it\nwill change again given the state of the approval process of this draft. See\nsection 7.1.3.6.3 in current draft (8.0).\n\nAlso, note that the extra address that I\u0027m removing was not being used, so this\nchange has no effect on over-the-air frame formats. But I thought I better\nremove it before someone does start using it.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "39fd5de4472b7b222c6cec78d72b069133f694e4", "tree": "81dd5a546598a1b09d3a48ca0f001b375ad91acb", "parents": [ "7f531e03abf0162df3966c4fa5fa6fdd9302cb6b" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 16 11:30:28 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:49:47 2010 -0500" }, "message": "nl80211: Export available antennas\n\nExport the information which antennas are available for configuration as TX or\nRX antennas via nl80211.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7f531e03abf0162df3966c4fa5fa6fdd9302cb6b", "tree": "b5e91c5ee9580e942749768e96421c1e55c3491b", "parents": [ "c7108a7111cd9e592d6ad498be37276dbea75d2b" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 16 11:30:22 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:58 2010 -0500" }, "message": "cfg80211: Separate available antennas for RX and TX\n\nAs has been pointed out by Daniel Halperin some devices (e.g. Intel IWL5100)\ncan only TX from a subset of RX antennas, so use separate availability masks\nfor RX and TX.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c80d545da3f7c0e534ccd4a780f322f80a92cff1", "tree": "edd5c51676b4677fc1a0b2fc692ffe97df863f25", "parents": [ "24bdd9f4c9af75b33b438d60381a67626de0128d" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:49 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:57 2010 -0500" }, "message": "mac80211: Let userspace enable and configure vendor specific path selection.\n\nUserspace will now be allowed to toggle between the default path\nselection algorithm (HWMP, implemented in the kernel), and a vendor\nspecific alternative. Also in the same patch, allow userspace to add\ninformation elements to mesh beacons. This is accordance with the\nExtensible Path Selection Framework specified in version 7.0 of the\n802.11s draft.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24bdd9f4c9af75b33b438d60381a67626de0128d", "tree": "f5ff8c4f9ec2a7cdb976f419532179f2c46b06e8", "parents": [ "8a09d6d80c90c02f2f8c89f69c702cab0c8d9b42" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:48 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:57 2010 -0500" }, "message": "mac80211: Rename mesh_params to mesh_config to prepare for mesh_setup\n\nMesh parameters can be to setup a mesh or to configure it.\nThis patch renames the ambiguous name mesh_params to mesh_config\nin preparation for mesh_setup.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2784fe915cd25adf23ea28534019308d8a144721", "tree": "c780a7ee530a7563559374c2a66c21e15cd1a487", "parents": [ "45ef6a0bcc9cd8f13004789ec6decb52e1d3045c" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Dec 15 19:24:11 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 16 15:22:31 2010 -0500" }, "message": "cfg80211: fix null pointer dereference with a custom regulatory request\n\nOnce we moved the core regulatory request to the queue and let\nthe scheduler process it last_request will have been left NULL\nuntil the schedular decides to process the first request. When\nthis happens and we are loading a driver with a custom regulatory\nrequest like all Atheros drivers we end up with a NULL pointer\ndereference. We fix this by checking if the request was a\ncustom one.\n\nBUG: unable to handle kernel NULL pointer dereference at 0000000000000004\nIP: [\u003cffffffffa016de87\u003e] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211]\nPGD 71f91067 PUD 712b2067 PMD 0\nOops: 0000 [#1] PREEMPT SMP\nlast sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1/loading\nCPU 0\nModules linked in: ath9k_htc(+) ath9k_common ath9k_hw ath \u003cetc\u003e\nPid: 3094, comm: insmod Tainted: G W 2.6.37-rc5-wl #16 INVALID/28427ZQ\nRIP: 0010:[\u003cffffffffa016de87\u003e] [\u003cffffffffa016de87\u003e] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211]\nRSP: 0018:ffff88007045db78 EFLAGS: 00010282\nRAX: 0000000000000000 RBX: ffffffffa047d9a0 RCX: ffff88007045dbd0\nRDX: 0000000000004e20 RSI: 000000000024cde0 RDI: ffff8800700483e0\nRBP: ffff88007045db98 R08: ffffffffa02f5b40 R09: 0000000000000001\nR10: 000000000000000e R11: 0000000000000001 R12: 0000000000000000\nR13: ffff88007004e3b0 R14: 0000000000000000 R15: ffff880070048340\nFS: 00007f635a707700(0000) GS:ffff880077400000(0000) knlGS:0000000000000000\nCS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b\nCR2: 0000000000000004 CR3: 00000000708a9000 CR4: 00000000000006f0\nDR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000\nDR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400\nProcess insmod (pid: 3094, threadinfo ffff88007045c000, task ffff8800713e3ec0)\nStack:\n ffffffffa047d9a0 0000000000000000 ffff88007004e3b0 0000000000000000\n ffff88007045dc08 ffffffffa016e147 000000007045dc08 0000000000000002\n ffff8800700483e0 ffffffffa02f5b40 ffff88007045dbd8 0000000000000000\nCall Trace:\n [\u003cffffffffa016e147\u003e] wiphy_apply_custom_regulatory+0x137/0x1d0 [cfg80211]\n [\u003cffffffffa047a690\u003e] ? ath9k_reg_notifier+0x0/0x50 [ath9k_htc]\n [\u003cffffffffa02f47f7\u003e] ath_regd_init+0x347/0x430 [ath]\n [\u003cffffffffa047b1f5\u003e] ath9k_htc_probe_device+0x6c5/0x960 [ath9k_htc]\n [\u003cffffffffa0472a2c\u003e] ath9k_htc_hw_init+0xc/0x30 [ath9k_htc]\n [\u003cffffffffa04747e6\u003e] ath9k_hif_usb_probe+0x216/0x3b0 [ath9k_htc]\n [\u003cffffffffa03bb6bc\u003e] usb_probe_interface+0x10c/0x210 [usbcore]\n [\u003cffffffff812aec26\u003e] driver_probe_device+0x96/0x1c0\n [\u003cffffffff812aedf3\u003e] __driver_attach+0xa3/0xb0\n [\u003cffffffff812aed50\u003e] ? __driver_attach+0x0/0xb0\n [\u003cffffffff812adaae\u003e] bus_for_each_dev+0x5e/0x90\n [\u003cffffffff812ae8c9\u003e] driver_attach+0x19/0x20\n [\u003cffffffff812ae438\u003e] bus_add_driver+0x168/0x320\n [\u003cffffffff812af071\u003e] driver_register+0x71/0x140\n [\u003cffffffff811fc4a8\u003e] ? __raw_spin_lock_init+0x38/0x70\n [\u003cffffffffa03ba39c\u003e] usb_register_driver+0xdc/0x190 [usbcore]\n [\u003cffffffffa03a2000\u003e] ? ath9k_htc_init+0x0/0x4f [ath9k_htc]\n [\u003cffffffffa047499e\u003e] ath9k_hif_usb_init+0x1e/0x20 [ath9k_htc]\n [\u003cffffffffa03a202b\u003e] ath9k_htc_init+0x2b/0x4f [ath9k_htc]\n [\u003cffffffff8100212f\u003e] do_one_initcall+0x3f/0x180\n [\u003cffffffff8109ef5b\u003e] sys_init_module+0xbb/0x200\n [\u003cffffffff8100bf52\u003e] system_call_fastpath+0x16/0x1b\nCode: \u003cetc, who cares\u003e\nRIP [\u003cffffffffa016de87\u003e] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211]\n RSP \u003cffff88007045db78\u003e\nCR2: 0000000000000004\n---[ end trace 79e4193601c8b713 ]---\n\nReported-by: Sujith Manoharan \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cf4e594ea7e55555e81647b74a3a8e8b2826a529", "tree": "794013429d9613ef253111fb50f993600ab14a55", "parents": [ "5928b91acae97622a6f2e679eb7a9f19bed68e3e" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Dec 16 00:52:40 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 16 15:22:30 2010 -0500" }, "message": "nl80211: Add notification for dropped Deauth/Disassoc\n\nAdd a new notification to indicate that a received, unprotected\nDeauthentication or Disassociation frame was dropped due to\nmanagement frame protection being in use. This notification is\nneeded to allow user space (e.g., wpa_supplicant) to implement\nSA Query procedure to recover from association state mismatch\nbetween an AP and STA.\n\nThis is needed to avoid getting stuck in non-working state when MFP\n(IEEE 802.11w) is used and a protected Deauthentication or\nDisassociation frame is dropped for any reason. After that, the\nstation would silently discard any unprotected Deauthentication or\nDisassociation frame that could be indicating that the AP does not\nhave association for the STA (when the Reason Code would be 6 or 7).\nIEEE Std 802.11w-2009, 11.13 describes this recovery mechanism.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bd2ce6e43f65127bc723e7fcc044758cf8113260", "tree": "46eeb3f454619549d563addd8eff3b4d5475179f", "parents": [ "a293911d4fd5e8593dbf478399a77f990d466269" ], "author": { "name": "Sujith Manoharan", "email": "Sujith.Manoharan@atheros.com", "time": "Wed Dec 15 07:47:10 2010 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 15 17:03:59 2010 -0500" }, "message": "mac80211: Add timeout to BA session start API\n\nAllow drivers or rate control algorithms to specify BlockAck session\ntimeout when initiating an ADDBA transaction. This is useful in cases\nwhere maintaining persistent BA sessions does not incur any overhead.\n\nThe current timeout value of 5000 TUs is retained for all non ath9k/ath9k_htc\ndrivers.\n\nSigned-off-by: Sujith Manoharan \u003cSujith.Manoharan@atheros.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a293911d4fd5e8593dbf478399a77f990d466269", "tree": "826f614f178e915c4d2c08aba9ca5b2a38f78c75", "parents": [ "14a085e77063090fb12ad391d0f4d46e593be225" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Dec 14 17:54:28 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 15 17:03:56 2010 -0500" }, "message": "nl80211: advertise maximum remain-on-channel duration\n\nWith the upcoming hardware offload implementation,\nsome devices will have a different maximum duration\nfor the remain-on-channel command. Advertise the\nmaximum duration in mac80211, and make mac80211 set\nit.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "44316cb1e97a1e7f76eb3f07e5b0ba91d72e9693", "tree": "105bbabbdd4c26ff8a5132557aa7aaaaa158d44f", "parents": [ "91f44b02992f632ac6c070f985cd58d5acee4199" ], "author": { "name": "Bing Zhao", "email": "bzhao@marvell.com", "time": "Thu Dec 09 18:24:41 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 13 15:23:30 2010 -0500" }, "message": "ieee80211: add Parameter Set Count bitmask\n\nWMM IE QoS Info field lower 4 bits: Parameter Set Count\n\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dbd2fd656f2060abfd3a16257f8b51ec60f6d2ed", "tree": "71e61430bd8593f2ad8f1c741b5a8a8be4a9d690", "parents": [ "897bed8b4320774e56f282cdc1cceb4d77442797" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Dec 09 19:58:59 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 13 15:23:28 2010 -0500" }, "message": "cfg80211/nl80211: separate unicast/multicast default TX keys\n\nAllow userspace to specify that a given key\nis default only for unicast and/or multicast\ntransmissions. Only WEP keys are for both,\nWPA/RSN keys set here are GTKs for multicast\nonly. For more future flexibility, allow to\nspecify all combiations.\n\nWireless extensions can only set both so use\nnl80211; WEP keys (connect keys) must be set\nas default for both (but 802.1X WEP is still\npossible).\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a7ffac9591a2a0ee74c431396ae475a8d0caa51e", "tree": "174134b89e490592003307263e6b3964d9a1eacf", "parents": [ "a08e7ade9ddf4fe79576f953cc5c1725e944d26c" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Dec 08 13:59:24 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 13 15:23:27 2010 -0500" }, "message": "cfg80211: Add antenna availability information\n\nAdd a field to wiphy for the hardware to report the availble antennas for\nconfiguration. Only if this is set to something bigger than zero, will the\nanntenna configuration ops be executed.\n\nAllthough this could be a simple number of antennas, I defined it as a bitmap\nof antennas which are available for configuration, since it\u0027s more consistent\nwith the rest of the antenna API and there could be cases where the\nhardware allows only configuration of certain antennas. As it does not make\nmuch of a difference in size or normal usage, I think it\u0027s better to be able to\nsupport this, in case the need arises.\n\nThe antenna configuration is now also checked against the availabe antennas and\nrejected if it does not match.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\n\n--\nv3:\talways apply available antenna mask (for \"all\" antennas case).\n\nv2:\treject antenna configurations which don\u0027t match the available antennas\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b7e8941b2df518186d9f7679c007f6b619bb4e89", "tree": "35f0dcfe920087e83d99f27b5deabad3d5f4e3d8", "parents": [ "692d2c0fb36c02ad07d54641c26f48e644b27fbd" ], "author": { "name": "Amitkumar Karwar", "email": "akarwar@marvell.com", "time": "Tue Dec 07 13:43:03 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 08 15:38:45 2010 -0500" }, "message": "cfg80211: add some element IDs in enum ieee80211_eid\n\n1)WLAN_EID_BSS_COEX_2040\n2)WLAN_EID_OVERLAP_BSS_SCAN_PARAM\n3)WLAN_EID_EXT_CAPABILITY\n\nSigned-off-by: Amitkumar Karwar \u003cakarwar@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "50b12f597be354a5a224f05c65c54c0667e57aec", "tree": "db4c59639d3d1bc013a2c3d7e17c47db2f94efc0", "parents": [ "7659a193f94c0003dd06e9e874d19bade1a8c952" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Fri Nov 19 12:40:25 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 08 15:38:43 2010 -0500" }, "message": "cfg80211: Add new BSS attribute ht_opmode\n\nAdd a new BSS attribute to allow hostapd to set the current HT opmode.\nOtherwise drivers won\u0027t be able to set up protection for HT rates in\nAP mode.\n\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "541a45a142df281c974d74eac2066138fc107b23", "tree": "b96f4808c3f17f2f560db9569ca2b08dba9eab67", "parents": [ "22de94de7de78b8de2fb1f2df5aa85b5556cfcfd" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 02 19:12:43 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 07 16:09:12 2010 -0500" }, "message": "nl80211/mac80211: Report signal average\n\nExtend nl80211 to report an exponential weighted moving average (EWMA) of the\nsignal value. Since the signal value usually fluctuates between different\npackets, an average can be more useful than the value of the last packet.\n\nThis uses the recently added generic EWMA library function.\n\n--\nv2:\tfix ABI breakage and change factor to be a power of 2.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "29cbe68c516a48a9a88b3226878570c6cbd83c02", "tree": "4774f8a3a244236234a521baa4d1ae5b3e1494ba", "parents": [ "bd90fdcc5fbd99a2a778999610420cf793bd1be2" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Dec 03 09:20:44 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:29 2010 -0500" }, "message": "cfg80211/mac80211: add mesh join/leave commands\n\nInstead of tying mesh activity to interface up,\nadd join and leave commands for mesh. Since we\nmust be backward compatible, let cfg80211 handle\njoining a mesh if a mesh ID was pre-configured\nwhen the device goes up.\n\nNote that this therefore must modify mac80211 as\nwell since mac80211 needs to lose the logic to\nstart the mesh on interface up.\n\nWe now allow querying mesh parameters before the\nmesh is connected, which simply returns defaults.\nSetting them (internally renamed to \"update\") is\nonly allowed while connected. Specify them with\nthe new mesh join command instead where needed.\n\nIn mac80211, beaconing must now also follow the\nmesh enabled/not enabled state, which is done\nby testing the mesh ID.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f9e10ce4cf86945eb5efcab31284c971877ed012", "tree": "a56ec8ed84019901bf92aa969e366afb8b8ce36b", "parents": [ "09b174702601079c3a04806754be30ffbd70db4d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Dec 03 09:20:42 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:28 2010 -0500" }, "message": "cfg80211: require add_virtual_intf to return new dev\n\ncfg80211 used to do all its bookkeeping in\nthe notifier, but some new stuff will have\nto use local variables so make the callback\nreturn the netdev pointer.\n\nTested-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "45904f21655cf4f0ae7d0fab5906fe51bf56ecf4", "tree": "fd023d65b881b6cfcf1529eed7c1ad2523c166e1", "parents": [ "b9e61f11f47035e3b4545b51fb547fef48eb3096" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Fri Dec 03 09:20:40 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:28 2010 -0500" }, "message": "nl80211/mac80211: define and allow configuring mesh element TTL\n\nThe TTL in path selection information elements is different from\nthe mesh ttl used in mesh data frames. Version 7.03 of the 11s\ndraft calls this ttl \u0027Element TTL\u0027.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "af5568843594fb71055debe36e521fa8072fcecc", "tree": "4f35966cb4e1018b05c87d7a10c337d888949e22", "parents": [ "5dcc03fe29537edd7819f5b121bf3d779693f37b" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 02 19:50:37 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 15:58:43 2010 -0500" }, "message": "lib: Improve EWMA efficiency by using bitshifts\n\nUsing bitshifts instead of division and multiplication should improve\nperformance. That requires weight and factor to be powers of two, but i think\nthis is something we can live with.\n\nThanks to Peter Zijlstra for the improved formula!\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\n\n--\n\nv2:\tuse log2.h functions\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c30ae138aa0570665725166679bdf4207041c8df", "tree": "06d887921a968298758e6b247a18b5f7cae449df", "parents": [ "78b8595691c34478a51d1c2bcbbb0f6ec8a28247", "be21871f24b0fcd8d0d09c8090385c9cec80efa3" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 02 15:17:46 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 02 15:17:46 2010 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6\n" }, { "commit": "547025d5d4d1056fb4b5a0c9c3c0d5c2fe22c082", "tree": "ded0de556e66d364f2b6b2345116bcb6e21c9016", "parents": [ "c1927d7a8fab07171d08f7a3a8b7e5fe87bb70d4" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 02 16:23:12 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 02 15:16:59 2010 -0500" }, "message": "cfg80211: Add documentation for antenna ops\n\nThe last patch with the same title was for mac80211 ops, accidentally.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "172c69a47675dc1ca9c7243c031d8d77701bccc0", "tree": "1f898bd1df40748483faab6284d50d343cdb8be5", "parents": [ "61790c5f3c5f158821821a00797d94504531839f" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Sun Nov 28 10:39:35 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 02 14:37:00 2010 -0500" }, "message": "ssb: extract indexes for power tables\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nAcked-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "be21871f24b0fcd8d0d09c8090385c9cec80efa3", "tree": "50c7674a8fffd7bf919de24a1fa0d1967c180319", "parents": [ "70f23020e6d89155504b5b39f22505f4aec6fa6f" ], "author": { "name": "Andrei Emeltchenko", "email": "andrei.emeltchenko@nokia.com", "time": "Wed Dec 01 16:58:26 2010 +0200" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Dec 01 21:04:43 2010 -0200" }, "message": "Bluetooth: clean up legal text\n\nRemove extra spaces from legal text so that legal stuff looks\nthe same for all bluetooth code.\n\nSigned-off-by: Andrei Emeltchenko \u003candrei.emeltchenko@nokia.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "70f23020e6d89155504b5b39f22505f4aec6fa6f", "tree": "91fb41030acd0d2a2ca3e55be2373c5a70284d0c", "parents": [ "894718a6be69d8cfd191dc291b42be32a1e4851b" ], "author": { "name": "Andrei Emeltchenko", "email": "andrei.emeltchenko@nokia.com", "time": "Wed Dec 01 16:58:25 2010 +0200" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Dec 01 21:04:43 2010 -0200" }, "message": "Bluetooth: clean up hci code\n\nDo not use assignment in IF condition, remove extra spaces,\nfixing typos, simplify code.\n\nSigned-off-by: Andrei Emeltchenko \u003candrei.emeltchenko@nokia.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "894718a6be69d8cfd191dc291b42be32a1e4851b", "tree": "47d814d0f4c9c8ac3de4ec4290422ea747ee5dd9", "parents": [ "285b4e90318dcf421a00b2ac3fe8ab713f3281e3" ], "author": { "name": "Andrei Emeltchenko", "email": "andrei.emeltchenko@nokia.com", "time": "Wed Dec 01 16:58:24 2010 +0200" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Dec 01 21:04:43 2010 -0200" }, "message": "Bluetooth: clean up l2cap code\n\nDo not initialize static vars to zero, macros with complex values\nshall be enclosed with (), remove unneeded braces.\n\nSigned-off-by: Andrei Emeltchenko \u003candrei.emeltchenko@nokia.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "285b4e90318dcf421a00b2ac3fe8ab713f3281e3", "tree": "2f69b35603f0c68288e364cc41de96e502ee511b", "parents": [ "735cbc4784a084b7a76c43c69f9dba683bb3b48b" ], "author": { "name": "Andrei Emeltchenko", "email": "andrei.emeltchenko@nokia.com", "time": "Wed Dec 01 16:58:23 2010 +0200" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Dec 01 21:04:43 2010 -0200" }, "message": "Bluetooth: clean up rfcomm code\n\nRemove extra spaces, assignments in if statement, zeroing static\nvariables, extra braces. Fix includes.\n\nSigned-off-by: Andrei Emeltchenko \u003candrei.emeltchenko@nokia.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "735cbc4784a084b7a76c43c69f9dba683bb3b48b", "tree": "75ba54305ab4e06fc7469761a0eb9b43ea9711a5", "parents": [ "b78d7b4f204a6ba1901af36c95e10fded9816054" ], "author": { "name": "Andrei Emeltchenko", "email": "andrei.emeltchenko@nokia.com", "time": "Wed Dec 01 16:58:22 2010 +0200" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Dec 01 21:04:43 2010 -0200" }, "message": "Bluetooth: clean up sco code\n\nDo not use assignments in IF condition, remove extra spaces\n\nSigned-off-by: Andrei Emeltchenko \u003candrei.emeltchenko@nokia.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "20ed3166c84d145589a89d8cde12aa32cf2d17f4", "tree": "c6fa2fb5ce7ce1bd06f8787809c534b793813f28", "parents": [ "4352fab5c2a1a602447d711c84d149bf2f0bc7ba" ], "author": { "name": "Johannes Stezenbach", "email": "js@sig21.net", "time": "Tue Nov 30 16:49:23 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 30 13:53:46 2010 -0500" }, "message": "mac80211/rt2x00: add ieee80211_tx_status_ni()\n\nAll rt2x00 drivers except rt2800pci call ieee80211_tx_status() from\na workqueue, which causes \"NOHZ: local_softirq_pending 08\" messages.\n\nTo fix it, add ieee80211_tx_status_ni() similar to ieee80211_rx_ni()\nwhich can be called from process context, and call it from\nrt2x00lib_txdone(). For the rt2800pci special case a driver\nflag is introduced.\n\nSigned-off-by: Johannes Stezenbach \u003cjs@sig21.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f7ca38dfe58c20cb1aa2ed9643187e8b194b5bae", "tree": "42db54588fd5fa769a16def75708117903577b40", "parents": [ "9a67d761b39614c0495dcab9a204e21a9f4c4d31" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Nov 25 10:02:29 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 29 15:24:35 2010 -0500" }, "message": "nl80211/cfg80211: extend mgmt-tx API for off-channel\n\nWith p2p, it is sometimes necessary to transmit\na frame (typically an action frame) on another\nchannel than the current channel. Enable this\nthrough the CMD_FRAME API, and allow it to wait\nfor a response. A new command allows that wait\nto be aborted.\n\nHowever, allow userspace to specify whether or\nnot it wants to allow off-channel TX, it may\nactually want to use the same channel only.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c063dbf52b998b852122dff07a8b8dd430b38437", "tree": "b27cc73fa8a1d9ed8fb5b0a1306e8194e18662a9", "parents": [ "79b1c460a0b55e55981c25c56597c4d5d2872de3" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Nov 24 08:10:05 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:36 2010 -0500" }, "message": "cfg80211: allow using CQM event to notify packet loss\n\nThis adds the ability for drivers to use CQM events\nto notify about packet loss for specific stations\n(which could be the AP for the managed mode case).\nSince the threshold might be determined by the\ndriver (it isn\u0027t passed in right now) it will be\npassed out of the driver to userspace in the event.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "79b1c460a0b55e55981c25c56597c4d5d2872de3", "tree": "aa146ddc5db00e1bad9f61ee4ca5c91fce55debd", "parents": [ "48124d1a91fb77defc9734b4556350d59671fb2c" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Nov 24 14:34:41 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:36 2010 -0500" }, "message": "cfg80211: Add documentation for antenna ops\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dd5b4cc71cd09c33e1579cc6d5720656e94e52de", "tree": "86a27c86480109d9b6bbedddc083095035fbef2d", "parents": [ "46090979a55a0dc2cdb3d939f94fa47742108194" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Mon Nov 22 20:58:24 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:35 2010 -0500" }, "message": "cfg80211/mac80211: improve ad-hoc multicast rate handling\n\n- store the multicast rate as an index instead of the rate value\n (reduces cpu overhead in a hotpath)\n- validate the rate values (must match a bitrate in at least one sband)\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d7a066c92394f3e777351de0c903beeb8a08af76", "tree": "f54ce8ac77d32b4c3166b4a2ca92525174a3213b", "parents": [ "ccb14354017272ddac002e859a2711610b6af174", "e476a5a41ad67d0e2b4a652820c49a3923eb936b" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:24 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:24 2010 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "ccb14354017272ddac002e859a2711610b6af174", "tree": "fa39f9b944508e596763c49b0088dc1cc2e263ca", "parents": [ "f8afa42b01c7a9f45b7cbaadb0481a0eeb96f18d" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:18:36 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:18:36 2010 -0500" }, "message": "Revert \"nl80211/mac80211: Report signal average\"\n\nThis reverts commit 86107fd170bc379869250eb7e1bd393a3a70e8ae.\n\nThis patch inadvertantly changed the userland ABI.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b2e253cf300c5e33f49b7dd8b593bfc722177401", "tree": "0da4d4121996f7869b0ce5ac469c6dd5e7c7beaa", "parents": [ "b0e2880b0518ad11af20c7c93ec5cac93f9f03b0" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Nov 17 21:46:09 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 22 15:48:51 2010 -0500" }, "message": "cfg80211: Fix regulatory bug with multiple cards and delays\n\nWhen two cards are connected with the same regulatory domain\nif CRDA had a delayed response then cfg80211\u0027s own set regulatory\ndomain would still be the world regulatory domain. There was a bug\non cfg80211\u0027s logic such that it assumed that once you pegged a\nrequest as the last request it was already the currently set\nregulatory domain. This would mean we would race setting a stale\nregulatory domain to secondary cards which had the same regulatory\ndomain since the alpha2 would match.\n\nWe fix this by processing each regulatory request atomically,\nand only move on to the next one once we get it fully processed.\nIn the case CRDA is not present we will simply world roam.\n\nThis issue is only present when you have a slow system and the\nCRDA processing is delayed. Because of this it is not a known\nregression.\n\nWithout this fix when a delay is present with CRDA the second card\nwould end up with an intersected regulatory domain and not allow it\nto use the channels it really is designed for. When two cards with\ntwo different regulatory domains were inserted you\u0027d end up\nrejecting the second card\u0027s regulatory domain request.\nThis fails with mac80211_hswim\u0027s regtest\u003d2 (two requests, same alpha2)\nand regtest\u003d3 (two requests, different alpha2) module parameter\noptions.\n\nThis was reproduced and tested against mac80211_hwsim using this\nCRDA delayer:\n\n #!/bin/bash\n echo $COUNTRY \u003e\u003e /tmp/log\n sleep 2\n /sbin/crda.orig\n\nAnd these regulatory tests:\n\n modprobe mac80211_hwsim regtest\u003d2\n modprobe mac80211_hwsim regtest\u003d3\n\nReported-by: Mark Mentovai \u003cmark@moxienet.com\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nTested-by: Mark Mentovai \u003cmark@moxienet.com\u003e\nTested-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1d8638d4038eb8709edc80e37a0bbb77253d86e9", "tree": "7eca1442ee8343500ca0cf3aa10f74e4301f1354", "parents": [ "d47844a014fada1a788719f6426bc7044f2a0fd8" ], "author": { "name": "Daniel Klaffenbach", "email": "danielklaffenbach@gmail.com", "time": "Fri Nov 19 21:25:21 2010 -0600" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 22 15:19:31 2010 -0500" }, "message": "ssb: b43-pci-bridge: Add new vendor for BCM4318\n\nAdd new vendor for Broadcom 4318.\n\nSigned-off-by: Daniel Klaffenbach \u003cdanielklaffenbach@gmail.com\u003e\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: Stable \u003cstable@kernel.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "86107fd170bc379869250eb7e1bd393a3a70e8ae", "tree": "579ee24be87e94246450420f4de57d8eda942848", "parents": [ "eef39befaae2a1559efe197d795c376a317af2af" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Tue Nov 16 10:58:48 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 18 14:22:20 2010 -0500" }, "message": "nl80211/mac80211: Report signal average\n\nExtend nl80211 to report an exponential weighted moving average (EWMA) of the\nsignal value. Since the signal value usually fluctuates between different\npackets, an average can be more useful than the value of the last packet.\n\nThis uses the recently added generic EWMA library function.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c5485a7e7569ab32eea240c850198519e2a765ef", "tree": "928a8556deaec0811d1b83102b33365aab28a270", "parents": [ "50a9432daeece6fc1309bef1dc0a7b8fde8204cb" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Tue Nov 16 10:58:37 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 18 14:21:52 2010 -0500" }, "message": "lib: Add generic exponentially weighted moving average (EWMA) function\n\nThis adds generic functions for calculating Exponentially Weighted Moving\nAverages (EWMA). This implementation makes use of a structure which keeps the\nEWMA parameters and a scaled up internal representation to reduce rounding\nerrors.\n\nThe original idea for this implementation came from the rt2x00 driver\n(rt2x00link.c). I would like to use it in several places in the mac80211 and\nath5k code and I hope it can be useful in many other places in the kernel code.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nReviewed-by: KOSAKI Motohiro \u003ckosaki.motohiro@jp.fujitsu.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4bce22b9b84032c77c7e038b07b24fcc706dfc10", "tree": "3c4ee91f19ca703d98956d8aa9f352df8ca10505", "parents": [ "488f6ba75b5deaa7e89d6cdac07e0f2120899b6f" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Nov 16 11:49:58 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 17 16:19:31 2010 -0500" }, "message": "mac80211: defines for AC numbers\n\nIn many places we\u0027ve just hardcoded the\nAC numbers -- which is a relic from the\noriginal mac80211 (d80211). Add constants\nfor them so we know what we\u0027re talking\nabout.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8f0729b16ae354f9db89394fc1d2d65003455d56", "tree": "260a562d0c0079ebfc1c507c9aa50e55a1592b6d", "parents": [ "885a46d0f7942d76c2f3860acb45f75237d3bb42" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Nov 11 15:07:23 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:39:08 2010 -0500" }, "message": "mac80211: add support for setting the ad-hoc multicast rate\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "885a46d0f7942d76c2f3860acb45f75237d3bb42", "tree": "f116fcc9b8204f7a113693e307de76e4098ebb36", "parents": [ "a619a4c0e1fd4e8c360c63d0df3fa0a401107d69" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Nov 11 15:07:22 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:39:08 2010 -0500" }, "message": "cfg80211: add support for setting the ad-hoc multicast rate\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a619a4c0e1fd4e8c360c63d0df3fa0a401107d69", "tree": "c9eb89d30834140f252c77bdf578528b11716678", "parents": [ "4e8c14e9587c38f4cce8049c766935629fdb8d46" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Thu Nov 11 08:50:18 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:37:08 2010 -0500" }, "message": "mac80211: Add function to get probe request template for current AP\n\nChipsets with hardware based connection monitoring need to autonomically\nsend directed probe-request frames to the AP (in the event of beacon loss,\nfor example.)\n\nFor the hardware to be able to do this, it requires a template for the frame\nto transmit to the AP, filled in with the BSSID and SSID of the AP, but also\nthe supported rate IE\u0027s.\n\nThis patch adds a function to mac80211, which allows the hardware driver to\nfetch this template after association, so it can be configured to the hardware.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "15d967532148a5fcda075282b82a271b6595a386", "tree": "e1913502e74768e685f6793b1d24426ac849b1da", "parents": [ "afe0cbf87500f0585d217deb8c6fd329793a7957" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Nov 10 12:50:56 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:37:05 2010 -0500" }, "message": "mac80211: Add antenna configuration\n\nAllow antenna configuration by calling driver\u0027s function for it.\n\nWe disallow antenna configuration if the wiphy is already running, mainly to\nmake life easier for 802.11n drivers which need to recalculate HT capabilites.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "afe0cbf87500f0585d217deb8c6fd329793a7957", "tree": "a7e4f6db468e623961ab2b71ccf2bfb9c6756894", "parents": [ "0e67d6cb753643fc076a90fa9309301b3fbfb8db" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Nov 10 12:50:50 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:37:05 2010 -0500" }, "message": "cfg80211: Add nl80211 antenna configuration\n\nAllow setting of TX and RX antennas configuration via nl80211.\n\nThe antenna configuration is defined as a bitmap of allowed antennas to use.\nThis API can be used to mask out antennas which are not attached or should not\nbe used for other reasons like regulatory concerns or special setups.\n\nSeparate bitmaps are used for RX and TX to allow configuring different antennas\nfor receiving and transmitting. Each bitmap is 32 bit long, each bit\nrepresenting one antenna, starting with antenna 1 at the first bit. If an\nantenna bit is set, this means the driver is allowed to use this antenna for RX\nor TX respectively; if the bit is not set the hardware is not allowed to use\nthis antenna.\n\nUsing bitmaps has the benefit of allowing for a flexible configuration\ninterface which can support many different configurations and which can be used\nfor 802.11n as well as non-802.11n devices. Instead of relying on some hardware\nspecific assumptions, drivers can use this information to know which antennas\nare actually attached to the system and derive their capabilities based on\nthat.\n\n802.11n devices should enable or disable chains, based on which antennas are\npresent (If all antennas belonging to a particular chain are disabled, the\nentire chain should be disabled). HT capabilities (like STBC, TX Beamforming,\nAntenna selection) should be calculated based on the available chains after\napplying the antenna masks. Should a 802.11n device have diversity antennas\nattached to one of their chains, diversity can be enabled or disabled based on\nthe antenna information.\n\nNon-802.11n drivers can use the antenna masks to select RX and TX antennas and\nto enable or disable antenna diversity.\n\nWhile covering chainmasks for 802.11n and the standard \"legacy\" modes \"fixed\nantenna 1\", \"fixed antenna 2\" and \"diversity\" this API also allows more rare,\nbut useful configurations as follows:\n\n1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to\nhave a low gain antenna for TX in order to keep within the regulatory\nconstraints and a high gain antenna for RX in order to receive weaker signals\n(\"speak softly, but listen harder\"). This can be useful for building long-shot\noutdoor links. Another usage of this setup is having a low-noise pre-amplifier\non antenna 1 and a power amplifier on the other antenna. This way transmit\nnoise is mostly kept out of the low noise receive channel.\n(This would be bitmaps: tx 1 rx 2).\n\n2) Another similar setup is: Use RX diversity on both antennas, but always send\non antenna 1. Again that would allow us to benefit from a higher gain RX\nantenna, while staying within the legal limits.\n(This would be: tx 0 rx 3).\n\n3) And finally there can be special experimental setups in research and\ndevelopment even with pre 802.11n hardware where more than 2 antennas are\navailable. It\u0027s good to keep the API simple, yet flexible.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\n\n--\nv7:\tMade bitmasks 32 bit wide and rebased to latest wireless-testing.\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f23a478075659db8a4fd62fa6e264a8bb052cc5b", "tree": "ba1492a4a781770644359b88e8ca2d8d3a00adc2", "parents": [ "ca4a0831917d6541b45f03542257fcb20dc9cf4a" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Mon Nov 08 11:51:06 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:37:04 2010 -0500" }, "message": "mac80211: support hardware TX fragmentation offload\n\nThe lower driver is notified when the fragmentation threshold changes\nand upon a reconfig of the interface.\n\nIf the driver supports hardware TX fragmentation, don\u0027t fragment\npackets in the stack.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "309075cf08ed92a7d2c0e22b7653c5daabbd7ad1", "tree": "65b181daa85a0b7e92460a1f71139ff50de07eb4", "parents": [ "62370e2b9376ea7b76e0423de28ccb322c17e2da" ], "author": { "name": "Jussi Kivilinna", "email": "jussi.kivilinna@mbnet.fi", "time": "Fri Nov 12 08:53:56 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 15 15:00:42 2010 -0500" }, "message": "cfg80211: fix WIPHY_FLAG_IBSS_RSN bit\n\nWIPHY_FLAG_IBSS_RSN is BIT(7) as is WIPHY_FLAG_CONTROL_PORT_PROTOCOL. Change\nto BIT(8).\n\nSigned-off-by: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "62370e2b9376ea7b76e0423de28ccb322c17e2da", "tree": "9c931b3bc1b5f1ef5b681de3cf567bda783e61a7", "parents": [ "7379efeacb707f49729080791a7a562d8996aec4" ], "author": { "name": "Arnd Hannemann", "email": "arnd@arndnet.de", "time": "Thu Nov 11 11:44:32 2010 -0600" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 15 15:00:42 2010 -0500" }, "message": "b43legacy: Fix compile on ARM architecture\n\nWhen b43legacy is compiled on the arm platform, the following errors are seen:\n\n CC [M] drivers/net/wireless/b43legacy/xmit.o\nIn file included from include/net/dst.h:11,\nfrom drivers/net/wireless/b43legacy/xmit.c:31:\ninclude/net/dst_ops.h:28: error: expected \u0027:\u0027, \u0027,\u0027, \u0027;\u0027, \u0027}\u0027 or \u0027__attribute__\u0027\n before \u0027____cacheline_aligned_in_smp\u0027\ninclude/net/dst_ops.h: In function \u0027dst_entries_get_fast\u0027:\ninclude/net/dst_ops.h:33: error: \u0027struct dst_ops\u0027 has no member named\n \u0027pcpuc_entries\u0027\ninclude/net/dst_ops.h: In function \u0027dst_entries_get_slow\u0027:\ninclude/net/dst_ops.h:41: error: \u0027struct dst_ops\u0027 has no member named\n \u0027pcpuc_entries\u0027\ninclude/net/dst_ops.h: In function \u0027dst_entries_add\u0027:\ninclude/net/dst_ops.h:49: error: \u0027struct dst_ops\u0027 has no member named\n \u0027pcpuc_entries\u0027\ninclude/net/dst_ops.h: In function \u0027dst_entries_init\u0027:\ninclude/net/dst_ops.h:55: error: \u0027struct dst_ops\u0027 has no member named\n \u0027pcpuc_entries\u0027\ninclude/net/dst_ops.h: In function \u0027dst_entries_destroy\u0027:\ninclude/net/dst_ops.h:60: error: \u0027struct dst_ops\u0027 has no member named\n \u0027pcpuc_entries\u0027\nmake[4]: *** [drivers/net/wireless/b43legacy/xmit.o] Error 1\nmake[3]: *** [drivers/net/wireless/b43legacy] Error 2\nmake[2]: *** [drivers/net/wireless] Error 2\nmake[1]: *** [drivers/net] Error 2\nmake: *** [drivers] Error 2\n\nThe cause is a missing include of \u003clinux/cache.h\u003e, which is present for\ni386 and x86_64 architectures, but not for arm.\n\nSigned-off-by: Arnd Hannemann \u003carnd@arndnet.de\u003e\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: Stable \u003cstable@kernel.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7919a57bc608140aa8614c19eac40c6916fb61d2", "tree": "0813ff8983a937eae8636808167bc59aa0e80c34", "parents": [ "e4b3fdb80021bc0a3239bfc2a873a6d7c6ac52a1" ], "author": { "name": "Andreas Herrmann", "email": "andreas.herrmann3@amd.com", "time": "Mon Aug 30 19:04:01 2010 +0000" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 15 13:27:04 2010 -0500" }, "message": "bitops: Provide generic sign_extend32 function\n\nThis patch moves code out from wireless drivers where two different\nfunctions are defined in three code locations for the same purpose and\nprovides a common function to sign extend a 32-bit value.\n\nSigned-off-by: Andreas Herrmann \u003candreas.herrmann3@amd.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c8aea565e8f715d9f10064b1cbfbc15bf75df501", "tree": "4c0b875ef905991f3096e169b3469efb1d677ea7", "parents": [ "34d59c07e9ad7130813c28f8554ef1298af923b7" ], "author": { "name": "Gery Kahn", "email": "geryk@ti.com", "time": "Tue Oct 05 16:09:05 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 15 13:25:02 2010 -0500" }, "message": "wl1271: ref_clock cosmetic changes\n\nCosmetic cleanup for ref_clock code while configured by board.\n\nSigned-off-by: Gery Kahn \u003cgeryk@ti.com\u003e\nSigned-off-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\n" }, { "commit": "ca4ffe8f2848169a8ded0ea8a60b2d81925564c9", "tree": "bfc6dabaf52b07b59c5146e26f71fe5193ddd04c", "parents": [ "749b527b21465fb079796c03ffb4302584dc31c1" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Oct 20 10:18:55 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 15 13:24:10 2010 -0500" }, "message": "cfg80211: fix disabling channels based on hints\n\nAfter a module loads you will have loaded the world roaming regulatory\ndomain or a custom regulatory domain. Further regulatory hints are\nwelcomed and should be respected unless the regulatory hint is coming\nfrom a country IE as the IEEE spec allows for a country IE to be a subset\nof what is allowed by the local regulatory agencies.\n\nSo disable all channels that do not fit a regulatory domain sent\nfrom a unless the hint is from a country IE and the country IE had\nno information about the band we are currently processing.\n\nThis fixes a few regulatory issues, for example for drivers that depend\non CRDA and had no 5 GHz freqencies allowed were not properly disabling\n5 GHz at all, furthermore it also allows users to restrict devices\nfurther as was intended.\n\nIf you recieve a country IE upon association we will also disable the\nchannels that are not allowed if the country IE had at least one\nchannel on the respective band we are procesing.\n\nThis was the original intention behind this design but it was\ncompletely overlooked...\n\nCc: David Quan \u003cdavid.quan@atheros.com\u003e\nCc: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\ncc: Easwar Krishnan \u003ceaswar.krishnan@atheros.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "749b527b21465fb079796c03ffb4302584dc31c1", "tree": "07269dcd8f82d163c3d7195d536f61b768da6c58", "parents": [ "7ca43d03b1291481bdf894bbaec5d580e7684e7d" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Oct 20 10:18:54 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 15 13:24:09 2010 -0500" }, "message": "cfg80211: fix allowing country IEs for WIPHY_FLAG_STRICT_REGULATORY\n\nWe should be enabling country IE hints for WIPHY_FLAG_STRICT_REGULATORY\neven if we haven\u0027t yet recieved regulatory domain hint for the driver\nif it needed one. Without this Country IEs are not passed on to drivers\nthat have set WIPHY_FLAG_STRICT_REGULATORY, today this is just all\nAtheros chipset drivers: ath5k, ath9k, ar9170, carl9170.\n\nThis was part of the original design, however it was completely\noverlooked...\n\nCc: Easwar Krishnan \u003ceaswar.krishnan@atheros.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2e48928d8a0f38c1b5c81eb3f1294de8a6382c68", "tree": "a752efac53a5bc036528d65625e990c0d4291ff7", "parents": [ "e081685c1bbe8da37c7f61726fdb783ff277f14f" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Wed Oct 20 10:16:58 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 15 13:24:06 2010 -0500" }, "message": "rfkill: remove dead code\n\nThe following code is defined but never used.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "90ae83f7fc32733e5829d806306c0c590f1a383f", "tree": "5b4cd7290c70d9899ca7caa99998395218b15cab", "parents": [ "47c5ba53bc5e5f88b5d1bbb97acd25afc27f74eb", "65289d6345d93abd860e43fd2119ac176d6cc697" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Nov 01 07:50:43 2010 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Nov 01 07:50:43 2010 -0400" }, "message": "Merge branch \u0027next-spi\u0027 of git://git.secretlab.ca/git/linux-2.6\n\n* \u0027next-spi\u0027 of git://git.secretlab.ca/git/linux-2.6:\n spi/pl022: fix erroneous platform data in U300\n spi: fixed odd static string conventions in core code\n spi/bfin_spi: only request GPIO on first load\n spi/bfin_spi: handle error/status changes after data interrupts\n spi: enable spi_board_info to be registered after spi_master\n" }, { "commit": "50440c6dcccbf90ee3629407cb13ca09cab7d900", "tree": "6441432e78ec884863e5104ad4893e2a3dbe8059", "parents": [ "09d692e6ff50e455f936e7e114e11f6ec5e0ea33", "55fee8d7f7cb011d7f161cf816220ac74e34b6b1" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Oct 31 21:03:23 2010 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Oct 31 21:03:23 2010 -0400" }, "message": "Merge branch \u0027i2c-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging\n\n* \u0027i2c-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:\n i2c-i801: Add PCI idents for Patsburg \u0027IDF\u0027 SMBus controllers\n i2c-i801: Handle multiple instances instead of keeping global state\n i2c-i801: Add Intel Patsburg device ID\n i2c: Drop unused I2C_CLASS_TV flags\n" }, { "commit": "ce9d8d9f7214c7b74a5dd7be8221545269a31155", "tree": "f6d529ea1d0b1c801af4a938b30de94b00ef9ca3", "parents": [ "82279e6bd7643da1b3fbda42555c3238c7b00d38", "592488a32b87daf27b92d2c1c5cdc440d1a1beae" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Oct 31 20:43:12 2010 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Oct 31 20:43:12 2010 -0400" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (70 commits)\n [SCSI] pmcraid: add support for set timestamp command and other fixes\n [SCSI] pmcraid: remove duplicate struct member\n [SCSI] qla4xxx: Fix cmd check in qla4xxx_cmd_wait\n [SCSI] megaraid_sas: Version and documentation update\n [SCSI] megaraid_sas: Add three times Online controller reset\n [SCSI] megaraid_sas: Add input parameter for max_sectors\n [SCSI] megaraid_sas: support devices update flag\n [SCSI] libosd: write/read_sg_kern API\n [SCSI] libosd: Support for scatter gather write/read commands\n [SCSI] libosd: Free resources in reverse order of allocation\n [SCSI] libosd: Fix bug in attr_page handling\n [SCSI] lpfc 8.3.18: Update lpfc driver version to 8.3.18\n [SCSI] lpfc 8.3.18: Add new WQE support\n [SCSI] lpfc 8.3.18: Fix critical errors\n [SCSI] lpfc 8.3.18: Adapter Shutdown and Unregistration cleanup\n [SCSI] lpfc 8.3.18: Add logic to detect last devloss timeout\n [SCSI] lpfc 8.3.18: Add support of received ELS commands\n [SCSI] lpfc 8.3.18: FC/FCoE Discovery fixes\n [SCSI] ipr: add definitions for a new adapter\n [SCSI] bfa: fix comments for c files\n ...\n" }, { "commit": "82279e6bd7643da1b3fbda42555c3238c7b00d38", "tree": "e3f846e0a7daf6966375809ff4317f9eb57a9af9", "parents": [ "bb8430a2c8fe2b726033017daadf73c69b0348ea", "4600d7c493f354a3e338a35bcf8a3bfbe815776a", "4882720b267b7b1d1b0ce08334b205f0329d4615" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Oct 31 20:40:24 2010 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Oct 31 20:40:24 2010 -0400" }, "message": "Merge branches \u0027irq-core-for-linus\u0027 and \u0027core-locking-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027irq-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n genirq: Fix up irq_node() for irq_data changes.\n genirq: Add single IRQ reservation helper\n genirq: Warn if enable_irq is called before irq is set up\n\n* \u0027core-locking-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n semaphore: Remove mutex emulation\n staging: Final semaphore cleanup\n jbd2: Convert jbd2_slab_create_sem to mutex\n hpfs: Convert sbi-\u003ehpfs_creation_de to mutex\n\nFix up trivial change/delete conflicts with deleted \u0027dream\u0027 drivers\n(drivers/staging/dream/camera/{mt9d112.c,mt9p012_fox.c,mt9t013.c,s5k3e2fx.c})\n" }, { "commit": "e30d9859cf08920ae711f57ecd9726804451d29f", "tree": "fd77bb6da3f6b95fec2c3251fa253c280d11a4b1", "parents": [ "cbf4bd380a9caa72118525eabe7b82c6a3c8da78" ], "author": { "name": "Seth Heasley", "email": "seth.heasley@intel.com", "time": "Sun Oct 31 21:06:59 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Sun Oct 31 21:06:59 2010 +0100" }, "message": "i2c-i801: Add Intel Patsburg device ID\n\nAdd support for the Intel Patsburg PCH SMBus Controller.\n\nSigned-off-by: Seth Heasley \u003cseth.heasley@intel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "cbf4bd380a9caa72118525eabe7b82c6a3c8da78", "tree": "fb9eb94db042226d3f62638c2aa740a85f6d37f6", "parents": [ "3985c7ce85039adacdf882904ca096f091d39346" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Oct 31 21:06:59 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Sun Oct 31 21:06:59 2010 +0100" }, "message": "i2c: Drop unused I2C_CLASS_TV flags\n\nThere are no users left for I2C_CLASS_TV_ANALOG and\nI2C_CLASS_TV_DIGITAL, so we can get rid of them.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "bb8430a2c8fe2b726033017daadf73c69b0348ea", "tree": "feb6063cab812816bc67bca4e509995b5ad9217d", "parents": [ "51ee4b84f5c86935b438d6636f34b523edb415a8" ], "author": { "name": "Christoph Hellwig", "email": "hch@infradead.org", "time": "Sun Oct 31 08:35:31 2010 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Oct 31 06:35:15 2010 -0700" }, "message": "locks: remove fl_copy_lock lock_manager operation\n\nThis one was only used for a nasty hack in nfsd, which has recently\nbeen removed.\n\nSigned-off-by: Christoph Hellwig \u003chch@lst.de\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3985c7ce85039adacdf882904ca096f091d39346", "tree": "afaf4161c4c3d9516cc09295eb30c0e22a8c3008", "parents": [ "fcf744a96c66ca6ad7301a372034b771e57f30c4", "ce384d91cd7a4269a1ed5d4307a70aa4c6fa14f2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 18:42:58 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 18:42:58 2010 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:\n isdn: mISDN: socket: fix information leak to userland\n netdev: can: Change mail address of Hans J. Koch\n pcnet_cs: add new_id\n net: Truncate recvfrom and sendto length to INT_MAX.\n RDS: Let rds_message_alloc_sgs() return NULL\n RDS: Copy rds_iovecs into kernel memory instead of rereading from userspace\n RDS: Clean up error handling in rds_cmsg_rdma_args\n RDS: Return -EINVAL if rds_rdma_pages returns an error\n net: fix rds_iovec page count overflow\n can: pch_can: fix section mismatch warning by using a whitelisted name\n can: pch_can: fix sparse warning\n netxen_nic: Fix the tx queue manipulation bug in netxen_nic_probe\n ip_gre: fix fallback tunnel setup\n vmxnet: trivial annotation of protocol constant\n vmxnet3: remove unnecessary byteswapping in BAR writing macros\n ipv6/udp: report SndbufErrors and RcvbufErrors\n phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addr\n" }, { "commit": "05fa3135fdc7b9b510b502a35b6b97d2b38c6f48", "tree": "d533e8112111202ae890b2061c0386669002d080", "parents": [ "096657b65e1ac197e20be5ce7cff6b6ca2532787" ], "author": { "name": "J. Bruce Fields", "email": "bfields@redhat.com", "time": "Sat Oct 30 17:31:15 2010 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 18:08:15 2010 -0700" }, "message": "locks: fix setlease methods to free passed-in lock\n\nWe modified setlease to require the caller to allocate the new lease in\nthe case of creating a new lease, but forgot to fix up the filesystem\nmethods.\n\nCc: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\nCc: Steve French \u003csfrench@samba.org\u003e\nCc: Trond Myklebust \u003cTrond.Myklebust@netapp.com\u003e\nSigned-off-by: J. Bruce Fields \u003cbfields@redhat.com\u003e\nAcked-by: Arnd Bergmann \u003carnd@arndb.de\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "1792f17b7210280a3d7ff29da9614ba779cfcedb", "tree": "e45797137b7fc4877dd60b289d6fb75c6bdcdcf0", "parents": [ "f02a38d86a14b6e544e218d806ffb0442785f62b", "6bff7eccb0d9bdef4123aad5399e73cbc26683a6" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 11:50:37 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 11:50:37 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.infradead.org/users/eparis/notify\n\n* \u0027for-linus\u0027 of git://git.infradead.org/users/eparis/notify: (22 commits)\n Ensure FMODE_NONOTIFY is not set by userspace\n make fanotify_read() restartable across signals\n fsnotify: remove alignment padding from fsnotify_mark on 64 bit builds\n fs/notify/fanotify/fanotify_user.c: fix warnings\n fanotify: Fix FAN_CLOSE comments\n fanotify: do not recalculate the mask if the ignored mask changed\n fanotify: ignore events on directories unless specifically requested\n fsnotify: rename FS_IN_ISDIR to FS_ISDIR\n fanotify: do not send events for irregular files\n fanotify: limit number of listeners per user\n fanotify: allow userspace to override max marks\n fanotify: limit the number of marks in a single fanotify group\n fanotify: allow userspace to override max queue depth\n fsnotify: implement a default maximum queue depth\n fanotify: ignore fanotify ignore marks if open writers\n fanotify: allow userspace to flush all marks\n fsnotify: call fsnotify_parent in perm events\n fsnotify: correctly handle return codes from listeners\n fanotify: use __aligned_u64 in fanotify userspace metadata\n fanotify: implement fanotify listener ordering\n ...\n" }, { "commit": "f02a38d86a14b6e544e218d806ffb0442785f62b", "tree": "84aace4aaf4b018c48f25ec2831888354baae16c", "parents": [ "925d169f5b86fe57e2f5264ea574cce9a89b719d", "169ed55bd30305b933f52bfab32a58671d44ab68", "7b79462a20826a7269322113c68ca78d5f67c0bd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 11:43:26 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 11:43:26 2010 -0700" }, "message": "Merge branches \u0027perf-fixes-for-linus\u0027 and \u0027x86-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027perf-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n jump label: Add work around to i386 gcc asm goto bug\n x86, ftrace: Use safe noops, drop trap test\n jump_label: Fix unaligned traps on sparc.\n jump label: Make arch_jump_label_text_poke_early() optional\n jump label: Fix error with preempt disable holding mutex\n oprofile: Remove deprecated use of flush_scheduled_work()\n oprofile: Fix the hang while taking the cpu offline\n jump label: Fix deadlock b/w jump_label_mutex vs. text_mutex\n jump label: Fix module __init section race\n\n* \u0027x86-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86: Check irq_remapped instead of remapping_enabled in destroy_irq()\n" }, { "commit": "6bff7eccb0d9bdef4123aad5399e73cbc26683a6", "tree": "59ebbe6cdc9480008d80670383a6f667f766a3cb", "parents": [ "1a5cea7215f7c6bd3c960d7b44e864f3a73d1ad4" ], "author": { "name": "Lino Sanfilippo", "email": "LinoSanfilippo@gmx.de", "time": "Fri Oct 29 12:02:17 2010 +0200" }, "committer": { "name": "Eric Paris", "email": "eparis@redhat.com", "time": "Sat Oct 30 14:07:40 2010 -0400" }, "message": "Ensure FMODE_NONOTIFY is not set by userspace\n\n In fsnotify_open() ensure that FMODE_NONOTIFY is never set by userspace.\n Also always call fsnotify_parent and fsnotify.\n\nSigned-off-by: Lino Sanfilippo \u003cLinoSanfilippo@gmx.de\u003e\nSigned-off-by: Eric Paris \u003ceparis@redhat.com\u003e\n" }, { "commit": "925d169f5b86fe57e2f5264ea574cce9a89b719d", "tree": "241d3156b427c6398bd3fc5efa9108635d0e189b", "parents": [ "cdf01dd5443d0befc8c6a32cb2e3d2f568fd2558", "6418c96107a2b399848bb8cfc6e29f11ca74fb94" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 09:05:48 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 09:05:48 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (39 commits)\n Btrfs: deal with errors from updating the tree log\n Btrfs: allow subvol deletion by unprivileged user with -o user_subvol_rm_allowed\n Btrfs: make SNAP_DESTROY async\n Btrfs: add SNAP_CREATE_ASYNC ioctl\n Btrfs: add START_SYNC, WAIT_SYNC ioctls\n Btrfs: async transaction commit\n Btrfs: fix deadlock in btrfs_commit_transaction\n Btrfs: fix lockdep warning on clone ioctl\n Btrfs: fix clone ioctl where range is adjacent to extent\n Btrfs: fix delalloc checks in clone ioctl\n Btrfs: drop unused variable in block_alloc_rsv\n Btrfs: cleanup warnings from gcc 4.6 (nonbugs)\n Btrfs: Fix variables set but not read (bugs found by gcc 4.6)\n Btrfs: Use ERR_CAST helpers\n Btrfs: use memdup_user helpers\n Btrfs: fix raid code for removing missing drives\n Btrfs: Switch the extent buffer rbtree into a radix tree\n Btrfs: restructure try_release_extent_buffer()\n Btrfs: use the flusher threads for delalloc throttling\n Btrfs: tune the chunk allocation to 5% of the FS as metadata\n ...\n\nFix up trivial conflicts in fs/btrfs/super.c and fs/fs-writeback.c, and\nremove use of INIT_RCU_HEAD in fs/btrfs/extent_io.c (that init macro was\nuseless and removed in commit 5e8067adfdba: \"rcu head remove init\")\n" }, { "commit": "847f877600313e65c5659476b30d74a6f66e388e", "tree": "b4390fb56dc3c9a47cb51f3a086515a376cffc0c", "parents": [ "79346507ad48895f41b438fa562b1965721f36b9", "120a795da07c9a02221ca23464c28a7c6ad7de1d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 08:35:35 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 08:35:35 2010 -0700" }, "message": "Merge branch \u0027audit.b64\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current\n\n* \u0027audit.b64\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:\n audit mmap\n audit: make link()/linkat() match \"attribute change\" predicate\n audit: Use rcu for task lookup protection\n audit: Do not send uninitialized data for AUDIT_TTY_GET\n audit: Call tty_audit_push_task() outside preempt disabled\n in untag_chunk() we need to do alloc_chunk() a bit earlier\n audit: make functions static\n Audit: add support to match lsm labels on user audit messages\n" }, { "commit": "79346507ad48895f41b438fa562b1965721f36b9", "tree": "5c115ce87f1fbc0b530f30db56cecf824e9f6e05", "parents": [ "706d4b12f8d7edd28d7e879a77235472da393edb", "40847437f15221b5822ba70550e8b9fcccfb9bb3" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 08:31:35 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 08:31:35 2010 -0700" }, "message": "Merge git://git.infradead.org/mtd-2.6\n\n* git://git.infradead.org/mtd-2.6: (82 commits)\n mtd: fix build error in m25p80.c\n mtd: Remove redundant mutex from mtd_blkdevs.c\n MTD: Fix wrong check register_blkdev return value\n Revert \"mtd: cleanup Kconfig dependencies\"\n mtd: cfi_cmdset_0002: make sector erase command variable\n mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips\n mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode\n mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one\n block2mtd: dubious assignment\n P4080/mtd: Fix the freescale lbc issue with 36bit mode\n P4080/eLBC: Make Freescale elbc interrupt common to elbc devices\n mtd: phram: use KBUILD_MODNAME\n mtd: OneNAND: S5PC110: Fix double call suspend \u0026 resume function\n mtd: nand: fix MTD_MODE_RAW writes\n jffs2: use kmemdup\n mtd: sm_ftl: cosmetic, use bool when possible\n mtd: r852: remove useless pci powerup/down from suspend/resume routines\n mtd: blktrans: fix a race vs kthread_stop\n mtd: blktrans: kill BKL\n mtd: allow to unload the mtdtrans module if its block devices aren\u0027t open\n ...\n\nFix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c\n" }, { "commit": "706d4b12f8d7edd28d7e879a77235472da393edb", "tree": "c9bc1ce06b1154a49da1d0d907cac544a818eb0e", "parents": [ "3af54c9bd9e6f14f896aac1bb0e8405ae0bc7a44", "9bafc74163d8bccca9810159aab39be926fb877c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 08:26:25 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Oct 30 08:26:25 2010 -0700" }, "message": "Merge branch \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits)\n ARM: memblock: setup lowmem mappings using memblock\n ARM: memblock: move meminfo into find_limits directly\n ARM: memblock: convert free_highpages() to use memblock\n ARM: move freeing of highmem pages out of mem_init()\n ARM: memblock: convert memory detail printing to use memblock\n ARM: memblock: use memblock to free memory into arm_bootmem_init()\n ARM: memblock: use memblock when initializing memory allocators\n ARM: ensure membank array is always sorted\n ARM: 6466/1: implement flush_icache_all for the rest of the CPUs\n ARM: 6464/2: fix spinlock recursion in adjust_pte()\n ARM: fix memblock breakage\n ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type\n ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt\n ARM: 6449/1: Fix for compiler warning of uninitialized variable.\n ARM: 6445/1: fixup TCM memory types\n ARM: imx: Add wake functionality to GPIO\n ARM: mx5: Add gpio-keys to mx51 babbage board\n ARM: imx: Add gpio-keys to plat-mxc\n mx31_3ds: Fix spi registration\n mx31_3ds: Fix the logic for detecting the debug board\n ...\n" }, { "commit": "120a795da07c9a02221ca23464c28a7c6ad7de1d", "tree": "14e0f5ab35e9397f4a1b2f5e24b8394a601aa409", "parents": [ "af2951325bd6c26cb2c91943c7b11aed53504056" ], "author": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sat Oct 30 02:54:44 2010 -0400" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sat Oct 30 08:45:43 2010 -0400" }, "message": "audit mmap\n\nNormal syscall audit doesn\u0027t catch 5th argument of syscall. It also\ndoesn\u0027t catch the contents of userland structures pointed to be\nsyscall argument, so for both old and new mmap(2) ABI it doesn\u0027t\nrecord the descriptor we are mapping. For old one it also misses\nflags.\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "af2951325bd6c26cb2c91943c7b11aed53504056", "tree": "def3ced35a2db4dd5a8155a833865425d74de7de", "parents": [ "ab263f47c9781a644de8b28013434b645082922e" ], "author": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Wed Nov 11 10:09:41 2009 -0500" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sat Oct 30 08:45:43 2010 -0400" }, "message": "audit: make link()/linkat() match \"attribute change\" predicate\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "3c80fe4ac9cfb13b1bfa4edf1544e8b656716694", "tree": "c605435b642323cd76eea9567a43d8c67b9c9db1", "parents": [ "f7a998a9491f2da1d3e44d150aa611d10093da4f" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Wed Dec 09 14:19:31 2009 +0000" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sat Oct 30 08:45:25 2010 -0400" }, "message": "audit: Call tty_audit_push_task() outside preempt disabled\n\nWhile auditing all tasklist_lock read_lock sites I stumbled over the\nfollowing call chain:\n\naudit_prepare_user_tty()\n read_lock(\u0026tasklist_lock);\n tty_audit_push_task();\n mutex_lock(\u0026buf-\u003emutex);\n\n --\u003e buf-\u003emutex is locked with preemption disabled.\n\nSolve this by acquiring a reference to the task struct under\nrcu_read_lock and call tty_audit_push_task outside of the preempt\ndisabled region.\n\nMove all code which needs to be protected by sighand lock into\ntty_audit_push_task() and use lock/unlock_sighand as we do not hold\ntasklist_lock.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nCc: Eric Paris \u003ceparis@redhat.com\u003e\nCc: Oleg Nesterov \u003coleg@redhat.com\u003e\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "67577927e8d7a1f4b09b4992df640eadc6aacb36", "tree": "2e9efe6b5745965faf0dcc084d4613d9356263f9", "parents": [ "6fe4c590313133ebd5dadb769031489ff178ece1", "51f00a471ce8f359627dd99aeac322947a0e491b" ], "author": { "name": "David Woodhouse", "email": "David.Woodhouse@intel.com", "time": "Sat Oct 30 12:35:11 2010 +0100" }, "committer": { "name": "David Woodhouse", "email": "David.Woodhouse@intel.com", "time": "Sat Oct 30 12:35:11 2010 +0100" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git\n\nConflicts:\n\tdrivers/mtd/mtd_blkdevs.c\n\nMerge Grant\u0027s device-tree bits so that we can apply the subsequent fixes.\n\nSigned-off-by: David Woodhouse \u003cDavid.Woodhouse@intel.com\u003e\n" }, { "commit": "4882720b267b7b1d1b0ce08334b205f0329d4615", "tree": "dd54880f84b7b7fb2bbdb529ffada434aca1e4d9", "parents": [ "45f4d0243525b6bc747c946937ced437b135a84d" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Tue Sep 07 14:34:01 2010 +0000" }, "committer": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Sat Oct 30 12:12:50 2010 +0200" }, "message": "semaphore: Remove mutex emulation\n\nSemaphores used as mutexes have been deprecated for years. Now that\nall users are either converted to real semaphores or to mutexes remove\nthe cruft.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Peter Zijlstra \u003cpeterz@infradead.org\u003e\nCc: Christoph Hellwig \u003chch@infradead.org\u003e\nLKML-Reference: \u003c20100907125057.562399240@linutronix.de\u003e\n\n" }, { "commit": "1840897ab5d39b2e510c610ee262ded79919e718", "tree": "0b7fe95e3eda357d35b0d017f2b678b652307827", "parents": [ "d56f84e7e317c69adefb2454a3d538a6d7e11e4b", "a4765fa7bfb92d5b9de19a503674b6624f95a7ae" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 14:17:12 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 14:17:12 2010 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)\n b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd\n mac80211: fix failure to check kmalloc return value in key_key_read\n libertas: Fix sd8686 firmware reload\n ath9k: Fix incorrect access of rate flags in RC\n netfilter: xt_socket: Make tproto signed in socket_mt6_v1().\n stmmac: enable/disable rx/tx in the core with a single write.\n net: atarilance - flags should be unsigned long\n netxen: fix kdump\n pktgen: Limit how much data we copy onto the stack.\n net: Limit socket I/O iovec total length to INT_MAX.\n USB: gadget: fix ethernet gadget crash in gether_setup\n fib: Fix fib zone and its hash leak on namespace stop\n cxgb3: Fix panic in free_tx_desc()\n cxgb3: fix crash due to manipulating queues before registration\n 8390: Don\u0027t oops on starting dev queue\n dccp ccid-2: Stop polling\n dccp: Refine the wait-for-ccid mechanism\n dccp: Extend CCID packet dequeueing interface\n dccp: Return-value convention of hc_tx_send_packet()\n igbvf: fix panic on load\n ...\n" }, { "commit": "337ac9d5218cc19f40fca13fa4deb3c658c4241b", "tree": "0a63c0bb554c7cceec778d22f11ca5e1efb39c7a", "parents": [ "a4765fa7bfb92d5b9de19a503674b6624f95a7ae" ], "author": { "name": "Cyril Chemparathy", "email": "cyril@ti.com", "time": "Fri Oct 29 13:50:25 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Oct 29 13:50:25 2010 -0700" }, "message": "phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addr\n\nThe marvell 88ec048\u0027s official part number is 88e1318s. This patch renames\ndefinitions in the driver to reflect this.\n\nIn addition, a minor bug fix has been added to write back the MSCR1 register\nvalue properly.\n\nSigned-off-by: Cyril Chemparathy \u003ccyril@ti.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1e431a9d6478940c0b5fcfa1c17a336fc0683409", "tree": "ce6b454ecbad4f535b9a18ef8605f8218a409ee6", "parents": [ "75d73126fd490e26a9bdfc2338ca068e71563e0b", "ff10b88b5a05c8f1646dd15fb9f6093c1384ff6d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 11:49:38 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 11:49:38 2010 -0700" }, "message": "Merge branch \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb\n\n* \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:\n kgdb,ppc: Individual register get/set for ppc\n kgdbts: prevent re-entry to kgdbts before it unregisters\n debug_core,x86,blackfin: Clean up hw debug disable API\n kdb: Fix early debugging crash regression\n kgdb,arm: fix register dump\n kdb: fix per_cpu command to remove supress mask\n kdb: Add kdb kernel module sample\n" }, { "commit": "45f81b1c96d9793e47ce925d257ea693ce0b193e", "tree": "2260824b11e36d3f392d1795611795541dfc89d0", "parents": [ "2d1d7126bbde53989f1d7de174816c123bb7ecb0" ], "author": { "name": "Steven Rostedt", "email": "srostedt@redhat.com", "time": "Fri Oct 29 12:33:43 2010 -0400" }, "committer": { "name": "Steven Rostedt", "email": "rostedt@goodmis.org", "time": "Fri Oct 29 14:45:29 2010 -0400" }, "message": "jump label: Add work around to i386 gcc asm goto bug\n\nOn i386 (not x86_64) early implementations of gcc would have a bug\nwith asm goto causing it to produce code like the following:\n\n(This was noticed by Peter Zijlstra)\n\n 56 pushl 0\n 67 nopl jmp 0x6f\n popl\n jmp 0x8c\n\n 6f mov\n test\n je 0x8c\n\n 8c mov\n call *(%esp)\n\nThe jump added in the asm goto skipped over the popl that matched\nthe pushl 0, which lead up to a quick crash of the system when\nthe jump was enabled. The nopl is defined in the asm goto () statement\nand when tracepoints are enabled, the nop changes to a jump to the label\nthat was specified by the asm goto. asm goto is suppose to tell gcc that\nthe code in the asm might jump to an external label. Here gcc obviously\nfails to make that work.\n\nThe bug report for gcc is here:\n\n http://gcc.gnu.org/bugzilla/show_bug.cgi?id\u003d46226\n\nThe bug only appears on x86 when not compiled with\n-maccumulate-outgoing-args. This option is always set on x86_64 and it\nis also the work around for a function graph tracer i386 bug.\n(See commit: 746357d6a526d6da9d89a2ec645b28406e959c2e)\nThis explains why the bug only showed up on i386 when function graph\ntracer was not enabled.\n\nThis patch now adds a CONFIG_JUMP_LABEL option that is default\noff instead of using jump labels by default. When jump labels are\nenabled, the -maccumulate-outgoing-args will be used (causing a\nslightly larger kernel image on i386). This option will exist\nuntil we have a way to detect if the gcc compiler in use is safe\nto use on all configurations without the work around.\n\nNote, there exists such a test, but for now we will keep the enabling\nof jump label as a manual option.\n\nArchs that know the compiler is safe with asm goto, may choose to\nselect JUMP_LABEL and enable it by default.\n\nReported-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nCause-discovered-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Jason Baron \u003cjbaron@redhat.com\u003e\nCc: H. Peter Anvin \u003chpa@zytor.com\u003e\nCc: David Daney \u003cddaney@caviumnetworks.com\u003e\nCc: Mathieu Desnoyers \u003cmathieu.desnoyers@efficios.com\u003e\nCc: Masami Hiramatsu \u003cmasami.hiramatsu.pt@hitachi.com\u003e\nCc: David Miller \u003cdavem@davemloft.net\u003e\nCc: Richard Henderson \u003crth@redhat.com\u003e\nLKML-Reference: \u003c1288028746.3673.11.camel@laptop\u003e\nSigned-off-by: Steven Rostedt \u003crostedt@goodmis.org\u003e\n" }, { "commit": "d7ba979d45272385ce0fdf141d922e61ff48e07b", "tree": "713ffb5f2e079c6abdeb15cd4830a014df12db9b", "parents": [ "578bd4dfcda63d2ef15f025f1d5d55c0e56b9660" ], "author": { "name": "Dongdong Deng", "email": "dongdong.deng@windriver.com", "time": "Wed Aug 18 06:02:00 2010 -0500" }, "committer": { "name": "Jason Wessel", "email": "jason.wessel@windriver.com", "time": "Fri Oct 29 13:14:41 2010 -0500" }, "message": "debug_core,x86,blackfin: Clean up hw debug disable API\n\nThe kgdb_disable_hw_debug() was an architecture specific function for\ndisabling all hardware breakpoints on a per cpu basis when entering\nthe debug core.\n\nThis patch will remove the weak function kdbg_disable_hw_debug() and\nchange it into a call back which lives with the rest of hw breakpoint\ncall backs in struct kgdb_arch.\n\nSigned-off-by: Dongdong Deng \u003cdongdong.deng@windriver.com\u003e\nSigned-off-by: Jason Wessel \u003cjason.wessel@windriver.com\u003e\n" }, { "commit": "435f49a518c78eec8e2edbbadd912737246cbe20", "tree": "106df2617d42ace231e2fa9fcf1e0fd1075874ea", "parents": [ "f56f44001cb5b40089deac094dbb74e5c9f64d81" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 10:36:49 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 10:36:49 2010 -0700" }, "message": "readv/writev: do the same MAX_RW_COUNT truncation that read/write does\n\nWe used to protect against overflow, but rather than return an error, do\nwhat read/write does, namely to limit the total size to MAX_RW_COUNT.\nThis is not only more consistent, but it also means that any broken\nlow-level read/write routine that still keeps counts in \u0027int\u0027 can\u0027t\nbreak.\n\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3259f8bed2f0f57c2fdcdac1b510c3fa319ef97e", "tree": "5f06f6c83413ca2fc7aec85ba0811a8c91904097", "parents": [ "cb44921a09221f0a90217b44044448f63190f3e5" ], "author": { "name": "Chris Mason", "email": "chris.mason@oracle.com", "time": "Fri Oct 29 11:16:17 2010 -0400" }, "committer": { "name": "Chris Mason", "email": "chris.mason@oracle.com", "time": "Fri Oct 29 11:25:29 2010 -0400" }, "message": "Add new functions for triggering inode writeback\n\nWhen btrfs is running low on metadata space, it needs to force delayed\nallocation pages to disk. It currently does this with a suboptimal walk\nof a private list of inodes with delayed allocation, and it would be\nmuch better if we used the generic flusher threads.\n\nwriteback_inodes_sb_if_idle would be ideal, but it waits for the flusher\nthread to start IO on all the dirty pages in the FS before it returns.\nThis adds variants of writeback_inodes_sb* that allow the caller to\ncontrol how many pages get sent down.\n\nSigned-off-by: Chris Mason \u003cchris.mason@oracle.com\u003e\n" }, { "commit": "53113b06e48c6c38f7612c1f8043b8a0d2adf72b", "tree": "b50f098b72b6389fde956d8272c08169ff2b53cc", "parents": [ "37542b6a7e73e81f8c066a48e6911e476ee3b22f", "a4cdbd8bfb87ceff455aae85727077889b75001b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 08:06:25 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 08:06:25 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (29 commits)\n braino in internal.h\n convert simple cases of nfs-related -\u003eget_sb() to -\u003emount()\n convert btrfs\n convert ceph\n convert gfs2\n convert afs\n convert ecryptfs\n convert sysfs\n convert cgroup and cpuset\n switch get_sb_ns() users\n switch procfs to -\u003emount()\n setting -\u003eproc_mnt doesn\u0027t belong in proc_get_sb()\n convert cifs\n convert nilfs\n switch logfs to -\u003emount()\n logfs: fix a leak in get_sb\n logfs get_sb, part 3\n logfs get_sb, part 2\n logfs get_sb massage, part 1\n convert v9fs\n ...\n" }, { "commit": "37542b6a7e73e81f8c066a48e6911e476ee3b22f", "tree": "39da99d28803b18c223eebe45c3170992ee08b7e", "parents": [ "c07724e5b868c603f2a65f3855c77b23454db3ed", "d4a6f3c32c39132318454e77d59ab14b06f6eb02" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 08:05:33 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 29 08:05:33 2010 -0700" }, "message": "Merge branch \u0027sched-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027sched-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n sched_stat: Update sched_info_queue/dequeue() code comments\n sched, cgroup: Fixup broken cgroup movement\n" }, { "commit": "ceefda6931806972ecf550bd8231dce4a4178953", "tree": "46ed42a053f1ed43c3c110a21637a7b071657c8a", "parents": [ "aed1d84f98738bcc1c605e1ff442de9890441315" ], "author": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Mon Jul 26 13:16:50 2010 +0400" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Fri Oct 29 04:17:03 2010 -0400" }, "message": "switch get_sb_ns() users\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "51139adac92f7160ad3ca1cab2de1b4b8d19dc96", "tree": "ea12df0927809e8d5333e82d51cbdb96288c9e6b", "parents": [ "3c26ff6e499ee7e6f9f2bc7da5f2f30d80862ecf" ], "author": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sun Jul 25 23:47:46 2010 +0400" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Fri Oct 29 04:16:33 2010 -0400" }, "message": "convert get_sb_pseudo() users\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "3c26ff6e499ee7e6f9f2bc7da5f2f30d80862ecf", "tree": "bd758d7f15f24aed225a64de77cc535785c50f96", "parents": [ "fc14f2fef682df677d64a145256dbd263df2aa7b" ], "author": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sun Jul 25 11:46:36 2010 +0400" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Fri Oct 29 04:16:31 2010 -0400" }, "message": "convert get_sb_nodev() users\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "fc14f2fef682df677d64a145256dbd263df2aa7b", "tree": "74f6b939fbad959a43c04ec646cd0adc8af5f53a", "parents": [ "848b83a59b772b8f102bc5e3f1187c2fa5676959" ], "author": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sun Jul 25 01:48:30 2010 +0400" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Fri Oct 29 04:16:28 2010 -0400" }, "message": "convert get_sb_single() users\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "848b83a59b772b8f102bc5e3f1187c2fa5676959", "tree": "d09a3755252e73f4bef000ffafbc0e9fd72d1a38", "parents": [ "152a08366671080f27b32e0c411ad620c5f88b57" ], "author": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sun Jul 25 00:56:46 2010 +0400" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Fri Oct 29 04:16:26 2010 -0400" }, "message": "convert get_sb_mtd() users to -\u003emount()\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "152a08366671080f27b32e0c411ad620c5f88b57", "tree": "d13d16028f74839c678bce355ba8aac75d939fa8", "parents": [ "c96e41e92b4aaf11e1f9775ecf0d1c8cbff829ed" ], "author": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sun Jul 25 00:46:55 2010 +0400" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Fri Oct 29 04:16:13 2010 -0400" }, "message": "new helper: mount_bdev()\n\n... and switch of the obvious get_sb_bdev() users to -\u003emount()\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "c96e41e92b4aaf11e1f9775ecf0d1c8cbff829ed", "tree": "5c24ad8aa541018a51e1704dccfc370116bb932f", "parents": [ "d893f1bc2a9f0f7dcb4b433452c59f9bedac0d7d" ], "author": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Sun Jul 25 00:17:56 2010 +0400" }, "committer": { "name": "Al Viro", "email": "viro@zeniv.linux.org.uk", "time": "Fri Oct 29 04:15:06 2010 -0400" }, "message": "beginning of transtion: -\u003emount()\n\neventual replacement for -\u003eget_sb() - does *not* get vfsmount,\nreturn ERR_PTR(error) or root of subtree to be mounted.\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\n" }, { "commit": "18cb657ca1bafe635f368346a1676fb04c512edf", "tree": "b0eb6a4ceddf98e7bf820be7ff24bf131ff56b0c", "parents": [ "2301b65b86df8b80e6779ce9885ad62a5c4adc38", "e28c31a96b1570f17731b18e8efabb7308d0c22c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Oct 28 17:11:17 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Oct 28 17:11:17 2010 -0700" }, "message": "Merge branch \u0027stable/xen-pcifront-0.8.2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen\n and branch \u0027for-linus\u0027 of git://xenbits.xen.org/people/sstabellini/linux-pvhvm\n\n* \u0027for-linus\u0027 of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:\n xen: register xen pci notifier\n xen: initialize cpu masks for pv guests in xen_smp_init\n xen: add a missing #include to arch/x86/pci/xen.c\n xen: mask the MTRR feature from the cpuid\n xen: make hvc_xen console work for dom0.\n xen: add the direct mapping area for ISA bus access\n xen: Initialize xenbus for dom0.\n xen: use vcpu_ops to setup cpu masks\n xen: map a dummy page for local apic and ioapic in xen_set_fixmap\n xen: remap MSIs into pirqs when running as initial domain\n xen: remap GSIs as pirqs when running as initial domain\n xen: introduce XEN_DOM0 as a silent option\n xen: map MSIs into pirqs\n xen: support GSI -\u003e pirq remapping in PV on HVM guests\n xen: add xen hvm acpi_register_gsi variant\n acpi: use indirect call to register gsi in different modes\n xen: implement xen_hvm_register_pirq\n xen: get the maximum number of pirqs from xen\n xen: support pirq !\u003d irq\n\n* \u0027stable/xen-pcifront-0.8.2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)\n X86/PCI: Remove the dependency on isapnp_disable.\n xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c\n MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.\n x86: xen: Sanitse irq handling (part two)\n swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.\n MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.\n xen/pci: Request ACS when Xen-SWIOTLB is activated.\n xen-pcifront: Xen PCI frontend driver.\n xenbus: prevent warnings on unhandled enumeration values\n xenbus: Xen paravirtualised PCI hotplug support.\n xen/x86/PCI: Add support for the Xen PCI subsystem\n x86: Introduce x86_msi_ops\n msi: Introduce default_[teardown|setup]_msi_irqs with fallback.\n x86/PCI: Export pci_walk_bus function.\n x86/PCI: make sure _PAGE_IOMAP it set on pci mappings\n x86/PCI: Clean up pci_cache_line_size\n xen: fix shared irq device passthrough\n xen: Provide a variant of xen_poll_irq with timeout.\n xen: Find an unbound irq number in reverse order (high to low).\n xen: statically initialize cpu_evtchn_mask_p\n ...\n\nFix up trivial conflicts in drivers/pci/Makefile\n" }, { "commit": "e5b486841d572c5ac83c798f82f4f67cbbac5320", "tree": "162b0c3f058fb461515a06614711a717d6807bb8", "parents": [ "00969f23dae70f62d7ce3f7abbbfb6d09ef92739" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Oct 19 23:57:56 2010 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:30:24 2010 +0200" }, "message": "mfd: Factor out WM831x I2C I/O from the core driver\n\nIn preparation for the addition of SPI support for the WM831x move the I2C\nspecific code into a separate file with a separate Kconfig option so the\nI2C support can be excluded from the build.\n\nAlso update the 1133-EV1 PMIC module support for SMDK6410 to use the new\nsymbol.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "58aa6334fbf5cf420a47cfd2718a0b299f40a379", "tree": "3ed05252d2548b08d7845097d5107ae890efc628", "parents": [ "889cd5a60f880e0a56b7b769d0b74eb222e6896c" ], "author": { "name": "Lukasz Majewski", "email": "l.majewski@samsung.com", "time": "Mon Sep 27 14:32:26 2010 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:30:13 2010 +0200" }, "message": "mfd: Voltages and GPIOs platform_data definitions for max8998\n\nSigned-off-by: Lukasz Majewski \u003cl.majewski@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "889cd5a60f880e0a56b7b769d0b74eb222e6896c", "tree": "e223052fd8cfd75f039cd456b51e4b164286063f", "parents": [ "509bd4764c110b89bb3d09a5b6621fd31dc58044" ], "author": { "name": "Lukasz Majewski", "email": "l.majewski@samsung.com", "time": "Mon Sep 27 14:32:25 2010 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:30:11 2010 +0200" }, "message": "regulator: max8998 BUCK1/2 internal voltages and indexes defined\n\nBUCK1/2 internal voltages and indexes defined in the struct max8998_data\nmax_get_voltage_register now uses index values to chose proper register\nMore generic BUCK1/2 registers names provided\n\nSigned-off-by: Lukasz Majewski \u003cl.majewski@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "509bd4764c110b89bb3d09a5b6621fd31dc58044", "tree": "fe90cc3792c1e4a17d35301c3f0a62ef154a1787", "parents": [ "9d92492fb753f01caa31dc502f69c189c0c22ad0" ], "author": { "name": "Lukasz Majewski", "email": "l.majewski@samsung.com", "time": "Mon Sep 27 14:32:24 2010 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:30:09 2010 +0200" }, "message": "mfd: Support for ICs compliant with max8998\n\nSigned-off-by: Lukasz Majewski \u003cl.majewski@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "72f2e2c763edc41f8eead042b6ff933acb0378e2", "tree": "b31ca0ae6be04e9191fdd99fa157c9ec4b4598a2", "parents": [ "8e00593557c3c5a7bc6f636412a1cadcf4624232" ], "author": { "name": "kishore kadiyala", "email": "kishore.kadiyala@ti.com", "time": "Fri Sep 24 17:13:20 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:29:59 2010 +0200" }, "message": "mfd: Adding twl6030 mmc card detect support for MMC1\n\nAdding card detect callback function and card detect configuration\nfunction for MMC1 Controller on OMAP4.\n\nCard detect configuration function does initial configuration of the\nMMC Control \u0026 PullUp-PullDown registers of Phoenix.\n\nFor MMC1 Controller, card detect interrupt source is\ntwl6030 which is non-gpio. The card detect call back function provides\ncard present/absent status by reading MMC Control register present\non twl6030.\n\nSince OMAP4 doesn\u0027t use any GPIO line as used in OMAP3 for card detect,\nthe suspend/resume initialization which was done in omap_hsmmc_gpio_init\npreviously is moved to the probe thus making it generic for both OMAP3 \u0026\nOMAP4.\n\nCc: Tony Lindgren \u003ctony@atomide.com\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCc: Madhusudhan Chikkature \u003cmadhu.cr@ti.com\u003e\nCc: Adrian Hunter \u003cadrian.hunter@nokia.com\u003e\nSigned-off-by: Kishore Kadiyala \u003ckishore.kadiyala@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "8e00593557c3c5a7bc6f636412a1cadcf4624232", "tree": "5d2872ae1cc0f39ebc0e29114864d12acdee292d", "parents": [ "b4e017e332b873133602f47ae8cacfae64ab82c5" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Tue Sep 28 16:37:20 2010 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:29:57 2010 +0200" }, "message": "mfd: Add mc13892 support to mc13xxx\n\nmc13892 is the companion PMIC for Freescale\u0027s i.MX51. It\u0027s similar enough\nto mc13782 to support it in a single driver.\n\nThis patch introduces enough compatibility cruft to keep all users of the\nsuperseded mc13783 driver unchanged.\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "b4e017e332b873133602f47ae8cacfae64ab82c5", "tree": "1105ed0713d97b5fb6ecc3a4aa6b8d00639957f9", "parents": [ "7e2bb82ee0d74b621bab452888cc3e7e8a013d0b" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Tue Sep 28 16:38:41 2010 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:29:55 2010 +0200" }, "message": "mfd: Remove deprecated mc13783 functions\n\nThe last user is gone since v2.6.34-rc1~40\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "5f2545fa156f3d4d327038d7664608e146809a3c", "tree": "82794cb7ca41816463a35bcf27a4f18af0633730", "parents": [ "2d95ae3bbffe54b2e73e0d291e1d67e09d5e448f" ], "author": { "name": "Daniel Drake", "email": "dsd@laptop.org", "time": "Thu Sep 30 21:55:36 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:29:48 2010 +0200" }, "message": "mfd: Allow for bypass of cell resource conflict check\n\nThe upcoming VIA VX855 MFD driver needs to communicate resources\nto subdevices where the resources may be claimed by ACPI.\n\nAdd a flag to mfd_cell to request that resources are not policed.\n\nSigned-off-by: Daniel Drake \u003cdsd@laptop.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "c6252e9ce7f51a2af66bd69c93afb37191467c96", "tree": "08c8c93b4ba578cefd9e04e2b7e03b5241b1ed78", "parents": [ "2cfcce18bb09667f583f4a29e814cbadf1d4e525" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Wed Sep 22 14:58:30 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:29:40 2010 +0200" }, "message": "mfd: Declare abx500_remove_ops()\n\nOtherwise sparse warns about a public symbol with no declaration and\nthe compiler can\u0027t spot if the callers and users have different signatures\nfor the function.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "c26448c48448266480e1b6c371f897167060ceaf", "tree": "daaaa3b64dfe31d1c429b63dba6b4a27e325d18f", "parents": [ "39368eda96c0a54ea0b3c6066b08e46b37f7905f" ], "author": { "name": "Gary King", "email": "gking@nvidia.com", "time": "Mon Sep 20 00:18:27 2010 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:29:28 2010 +0200" }, "message": "mfd: Add basic tps6586x interrupt support\n\nAdd support for enabling and disabling tps6586x subdevice interrupts\n\nSigned-off-by: Gary King \u003cgking@nvidia.com\u003e\nAcked-by: Mike Rapoport \u003cmike@compulab.co.il\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" } ], "next": "38b340527aa44bb8d1b88ef1e5a4e26b27695c2b" }