)]}' { "log": [ { "commit": "1bdd89db117a55c77a854829ff507d6d68ab6485", "tree": "c09698f854627d280eeda42e6b25cba67c6fe8b3", "parents": [ "910ce396a88b84b99377f7c46888a1ff9a86ded3" ], "author": { "name": "Greg Ungerer", "email": "gerg@snapgear.com", "time": "Fri Sep 09 09:32:14 2005 +1000" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:27:35 2005 -0700" }, "message": "[PATCH] m68knommu: defines to support the ColdFire 523x processor\n\nAdd processor level and clock support defines for the ColdFire 523x\nprocessor.\n\nSigned-off-by: Greg Ungerer \u003cgerg@uclinux.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "910ce396a88b84b99377f7c46888a1ff9a86ded3", "tree": "215714e910916197be1de590a595bdb8adaf4178", "parents": [ "4fe8a0f4c5d64cbc78227a88df4566c0d0ee4648" ], "author": { "name": "Greg Ungerer", "email": "gerg@snapgear.com", "time": "Fri Sep 09 09:32:14 2005 +1000" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:27:35 2005 -0700" }, "message": "[PATCH] m68knommu: ColdFire 523x processor register definitions\n\nColdFire 523x processor hardware register definitions.\n\nSigned-off-by: Greg Ungerer \u003cgerg@uclinux.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "4fe8a0f4c5d64cbc78227a88df4566c0d0ee4648", "tree": "9dc3fc8276d987058cd8f3826113c5baa2a1b595", "parents": [ "529980c8b0b04e8a3f6606cdc156f1f81a5d68cd", "344a076110f4ecb16ea6d286b63be696604982ed" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:26:52 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:26:52 2005 -0700" }, "message": "Merge branch \u0027release\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6 \n" }, { "commit": "529980c8b0b04e8a3f6606cdc156f1f81a5d68cd", "tree": "2e9c548cb6c82c609c805911141638332a7a4a5b", "parents": [ "e3e3679cfc1c6689e035f6d69606253b1eda63ca", "52c18fd2dc5c6d96cec4f48c69fc17b00edd9860" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:24:34 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:24:34 2005 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq \n" }, { "commit": "e3e3679cfc1c6689e035f6d69606253b1eda63ca", "tree": "1e7931256ecb9b37c35469a26a37216287657857", "parents": [ "54205209732a05f51f5fbb3eb3e5c36ac81e79d9", "29db35edb2548c3b0299c53d62d5f26d77a8e58f" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:22:53 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:22:53 2005 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart \n" }, { "commit": "54205209732a05f51f5fbb3eb3e5c36ac81e79d9", "tree": "4992850c7d5d5ed4034cbd4fe5f5ea23aeff317e", "parents": [ "6d8de3a26b5c20b04a9317b4446582167d5883da", "b71e318cdb1dc301d734fdd4983dfc6dc167235a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:21:02 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 17:21:02 2005 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 \n" }, { "commit": "b71e318cdb1dc301d734fdd4983dfc6dc167235a", "tree": "225958f7e2fd766e9834a07e33ad7b8727081ca5", "parents": [ "d5ae36dd439549305f00a755556f49c9fa7bb237" ], "author": { "name": "Henk", "email": "Henk.Vergonet@gmail.com", "time": "Wed Aug 17 10:40:26 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:40:57 2005 -0700" }, "message": "[PATCH] USB: yealink: fix htons usage, documentation updates\n\nSigned-off-by: Henk Vergonet \u003chenk.vergonet@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d5ae36dd439549305f00a755556f49c9fa7bb237", "tree": "50293284d27a48aa49c66b4ac66e8b3bd80eb9f3", "parents": [ "aca951a22a1d93ebe31b54052b3eb9a8196df2fc" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue Aug 16 12:33:30 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:40:57 2005 -0700" }, "message": "[PATCH] USB: fix endian issues in yealink driver.\n\nsparse still complains about the htons usage, but I\u0027ll leave that for\nothers to fix.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "aca951a22a1d93ebe31b54052b3eb9a8196df2fc", "tree": "a4a7a15fa4055ed88ab2273390800038d4e37bd4", "parents": [ "d6450e19329c85ac4888c185429094236a650928" ], "author": { "name": "Henk", "email": "Henk.Vergonet@gmail.com", "time": "Tue Aug 16 16:17:43 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:40:57 2005 -0700" }, "message": "[PATCH] input-driver-yealink-P1K-usb-phone\n\nThis patch aggregates all modifications in the -mm tree and adds\ncomplete ringtone support.\n\nThe following features are supported:\n - keyboard full support\n - LCD full support\n - LED full support\n - dialtone full support\n - ringtone full support\n - audio playback via generic usb audio diver\n - audio record via generic usb audio diver\n\nFor driver documentation see: Documentation/input/yealink.txt\nFor vendor documentation see: http://yealink.com\n\nSigned-off-by: Henk \u003cHenk.Vergonet@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d6450e19329c85ac4888c185429094236a650928", "tree": "d83f2bbf989b838498d85cc05ad0a16b451211c1", "parents": [ "0256839619d9b1e933cafc83e7f0deaad4216465" ], "author": { "name": "Nick Sillik", "email": "n.sillik@temple.edu", "time": "Wed Aug 17 13:37:34 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:30:33 2005 -0700" }, "message": "[PATCH] USB Storage: code cleanups for onetouch.c\n\nAs sugested by Alan Stern here are a few code cleanups for onetouch.c:\n\n-Check number of endpoints before directly referencing intf-\u003eendpoint[2]\n-Use defined constants instead of magic numbers\n-Revmove the non-ascii characters from copyright notice\n-Make registration and deregistration messages more similar\n\nSigned-off-by: Nick Sillik \u003cn.sillik@temple.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "0256839619d9b1e933cafc83e7f0deaad4216465", "tree": "afadd5815781a99e06ebb537d8ac677d307c09fe", "parents": [ "d0384200f6b608e77fb5ddf7dfae1bf0e42c1c6e" ], "author": { "name": "Pete Zaitcev", "email": "zaitcev@redhat.com", "time": "Mon Aug 15 16:53:57 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:36 2005 -0700" }, "message": "[PATCH] usbmon in 2.6.13: peeking into DMA areas\n\nThis code looks at urb-\u003etransfer_dma, maps the page and takes the data.\nI am looking for volunteers to contribute architectures other than i386\nor to develop an architecure-neutral API for it (or point me that it\nwas done already).\n\nSigned-off-by: Pete Zaitcev \u003czaitcev@redhat.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d0384200f6b608e77fb5ddf7dfae1bf0e42c1c6e", "tree": "4ab0d9bcf70a42a2c75b7a4aca7a757e7085ee94", "parents": [ "e09711aef4180002241c7f2eab37390ddf40d6a0" ], "author": { "name": "david-b@pacbell.net", "email": "david-b@pacbell.net", "time": "Sat Aug 13 18:44:58 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:36 2005 -0700" }, "message": "[PATCH] ehci: add tt_usecs\n\nThis adds the field tt_usecs to ehci_qh and ehci_iso_stream, and sets it\nappropriately when setting them up as periodic endpoints. It records\nthe transation translator\u0027s think_time (added in last patch) plus the\ndownstream (i.e. low or full speed) bustime of the transfer associated\nwith each interrupt or iso frame, as calculated by usb_calc_bus_time.\n\nSigned-off-by: Dan Streetman \u003cddstreet@ieee.org\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "e09711aef4180002241c7f2eab37390ddf40d6a0", "tree": "9a537e417df8b8ab0d8e121f6a3e596898ec8ec0", "parents": [ "090ffa9d0e904e1ed0f86c84dcf20684a8ac1a5a" ], "author": { "name": "david-b@pacbell.net", "email": "david-b@pacbell.net", "time": "Sat Aug 13 18:41:04 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:35 2005 -0700" }, "message": "[PATCH] ehci: add think_time\n\nThis adds think_time to the usb_tt struct and sets it appropriately\n(measured in ns); this can help us implement better split transaction\nscheduling.\n\nSigned-off-by: Dan Streetman \u003cddstreet@ieee.org\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "090ffa9d0e904e1ed0f86c84dcf20684a8ac1a5a", "tree": "ccbe0623e934d69d3c51e99138a5720ef9e7f823", "parents": [ "64e049102d3de3e61409cb6019403a9e689dfda6" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Aug 31 09:54:50 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:33 2005 -0700" }, "message": "[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables\n\nThis wraps up the conversion of the \"usbnet\" driver structure, by\nmoving the Prolific PL-2201/2302 minidriver to a module of its own.\nIt also includes some minor cleanups to the remaining \"usbnet\" file,\nnotably removing that long changelog at the top.\n\nMinor historical note: Linux 2.2 first called the driver for\nthis hardware \"plusb\".\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "64e049102d3de3e61409cb6019403a9e689dfda6", "tree": "ede794cb59e0b5ae3fc72e901663646a12e04d38", "parents": [ "4324fd493430c0ab99dd7e89d50540b5e70f8098" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Aug 31 09:54:36 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:33 2005 -0700" }, "message": "[PATCH] USB: usbnet (8/9) module for RNDIS devices\n\nThis adds host-side RNDIS support to the \"usbnet\" driver, so Linux can talk\nto various devices (often based on WinCE) that otherwise only Windows could\ntalk to.\n\nTested with little-endian Linux talking to a Linux-USB Ethernet/RNDIS based\nperipheral. This also includes updates from Eddie C. Dost \u003cecd@brainaid.de\u003e\nfor big-endian SPARC Linux talking to a Nokia 9500 Communicator.\n\nIt\u0027s still marked as EXPERIMENTAL because this code is so young. This\nought to let Linux to work with various cable modems that previously\nwould have been \"Windows Only\".\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "4324fd493430c0ab99dd7e89d50540b5e70f8098", "tree": "66f1d16d895fd660ad8d5c7279e8bd08e6787eb8", "parents": [ "0aa599c5644fddd3052433c5335260108a8a39a2" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Aug 31 09:54:20 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:32 2005 -0700" }, "message": "[PATCH] USB: usbnet (7/9) module for CDC Ethernet\n\nMakes the CDC Ethernet support live in a separate driver module.\nThis module is a bit special since it exports utility functions\nthat are reused by the the Zaurus and RNDIS drivers, but it\u0027s\nnot \"core\" like usbnet itself.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "0aa599c5644fddd3052433c5335260108a8a39a2", "tree": "53ff1eadd9d5386e7b9912b1d2728d150ad8567f", "parents": [ "47ee3051c856cc2aa95d35d577a8cb37279d540f" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Aug 31 09:53:58 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:32 2005 -0700" }, "message": "[PATCH] USB: usbnet (6/9) module for Zaurii and compatibles\n\nThis moves usbnet support for Zaurus and compatibles into its own module.\nOther than exporting a couple of helper functions, this just involved\nshuffling some code and updating the comments.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "47ee3051c856cc2aa95d35d577a8cb37279d540f", "tree": "1b3a657de292579976f0ecedc0ed806680899efa", "parents": [ "904813cd8a0b334189da285bb05af0b18b062502" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Aug 31 09:53:42 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:32 2005 -0700" }, "message": "[PATCH] USB: usbnet (5/9) module for genesys gl620a cables\n\nThis moves the GeneSys GL620USB-A support into its own driver file.\nIt also fixes a \"return wrong skb\" glitch in the rx unbatching, as\nrecently reported, and adds some missing byteswaps in the special\n\"genelink\" headers (so it might now work on big-endian Linux).\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "904813cd8a0b334189da285bb05af0b18b062502", "tree": "b602c3a1b8907dcd9dc43193f41477cfc402fcc2", "parents": [ "2e55cc7210fef90f88201e860d8767594974574e" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Aug 31 09:53:26 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:31 2005 -0700" }, "message": "[PATCH] USB: usbnet (4/9) module for net1080 cables\n\nAs with the \"cdc_subset\" and \"asix\" drivers, this just moves the net1080\nsupport into its one driver module. In this case there\u0027s a small bit of\nextra cleanup involved, moving some funky framing logic into the tx_fixup()\nroutine (resolving a long overdue FIXME).\n\nMinor historical note: \"usbnet\" started out as \"net1080\", then got\ngeneralized to make it easier for other network drivers to reuse the\nurb queueing and fault management code here.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "2e55cc7210fef90f88201e860d8767594974574e", "tree": "6e2a9a9a5a974a5ac6f1b76c36a4aab01d8d2fe5", "parents": [ "38bde1d4699af45e6a4167a72e2e512e45c35ca8" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Aug 31 09:53:10 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:31 2005 -0700" }, "message": "[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters\n\nThis patch moves the ASIX AX8817x driver into its own file, just using\nthe \"usbnet\" infrastructure as a utility library.\n\n - As with \"cdc_subset\" this involved minor Kconfig/kbuild tweaks,\n moving code from one file to another, and exporting a few functions.\n\n - This includes updates from Jamie Painter to add (and use) a new hook\n to handle the different maximum transfer sizes for rx and tx sides.\n\n - Also from Jamie, some bugfixes:\n * MDIO byteorder (to address some PPC media negotiation problems);\n * Force alignment at key spots when using ax88772 framing (on some\n embedded hardware, the network stack will break otherwise);\n * Address some link reset problems.\n\nIt also makes this driver use the standard (5 seconds vs half second)\ncontrol timeouts used elsewhere in USB; and wraps a few lines before\nthe 80th column (which previously needed it).\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "38bde1d4699af45e6a4167a72e2e512e45c35ca8", "tree": "9a133b9c7f7d6d2ecbf99b14a9ce8bfd5b0ceea7", "parents": [ "f29fc259976e9f4dd1fe8ed59ccdd50e4ea61db0" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Aug 31 09:52:45 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:31 2005 -0700" }, "message": "[PATCH] USB: usbnet (2/9) module for simple network links\n\nThis patch creates the first of several separate \"minidriver\" modules\nfor \"usbnet\". This one handles only the very simplest hardware, which\ncan be handled almost entirely by the \"usbnet\" core.\n\n - Move device-specific bits into new \"cdc_subset.c\" driver,\n shrinking \"usbnet\" by a bunch;\n\n - Export the functions needed to support this minidriver\n (with EXPORT_SYMBOL_GPL);\n\n - Update Kconfig and kbuild accordingly.\n\nThis one handles about a dozen different device types, with the most\nnotable ones being Gumstix and most Linux-based PDAs (except Zaurus\nrunning that ancient code from Sharp).\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "f29fc259976e9f4dd1fe8ed59ccdd50e4ea61db0", "tree": "ef2798f4b6581926082b88a8cd6cdecbd11ac39e", "parents": [ "dd7d50081f5dafd9392bd79f1ec90d553a7303c9" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Aug 31 09:52:31 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:30 2005 -0700" }, "message": "[PATCH] USB: usbnet (1/9) clean up framing\n\nThis starts to prepare the core of \"usbnet\" to know less about various\nframing protocols that map Ethernet packets onto USB, so \"minidrivers\"\ncan be modules that just plug into the core.\n\n - Remove some framing-specific code that cluttered the core:\n\n * net-\u003ehard_header_len records how much space to preallocate;\n now drivers that add their own framing (Net1080, GeneLink,\n\tZaurus, and RNDIS) will have smoother TX paths. Even for\n\tthe drivers (Zaurus, Net1080) that need trailers.\n\n * defines new dev-\u003ehard_mtu, using this \"hardware\" limit to\n check changes to the link\u0027s settable \"software\" mtu.\n\n * now net-\u003ehard_header_len and dev-\u003ehard_mtu are set up in the\n driver bind() routines, if needed.\n\n - Transaction ID is no longer specific to the Net1080 framing;\n RNDIS needs one too.\n\n - Creates a new \"usbnet.h\" header with declarations that are shared\n between the core and what will be separate modules.\n\n - Plus a couple other minor tweaks, like recognizing -ESHUTDOWN\n means the keventd work should just shut itself down asap.\n\nThe core code is only about 1/3 of this large file. Splitting out the\nminidrivers into separate modules (e.g. ones for ASIX adapters,\nZaurii and similar, CDC Ethernet, etc), in later patches, will\nimprove maintainability and shrink typical runtime footprints.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "dd7d50081f5dafd9392bd79f1ec90d553a7303c9", "tree": "1cf4373c019c33480375471f7b5d85ada3f3c68c", "parents": [ "9bc45e0c01ae268ad5f9e6d35492bbd8197e32f2" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@gmail.com", "time": "Sun Aug 14 17:24:26 2005 +0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:27 2005 -0700" }, "message": "[PATCH] USB ldusb: fmt warnings fixes for 64-bit platforms\n\nFix\n\ndrivers/usb/misc/ldusb.c: In function `ld_usb_read\u0027:\ndrivers/usb/misc/ldusb.c:467: warning: int format, different type arg (arg 4)\ndrivers/usb/misc/ldusb.c: In function `ld_usb_write\u0027:\ndrivers/usb/misc/ldusb.c:531: warning: int format, different type arg (arg 4)\ndrivers/usb/misc/ldusb.c:532: warning: int format, different type arg (arg 5)\ndrivers/usb/misc/ldusb.c:532: warning: int format, different type arg (arg 6)\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "9bc45e0c01ae268ad5f9e6d35492bbd8197e32f2", "tree": "0d6be55e53051da39ffb40396f2cb8a975c116d9", "parents": [ "4fbd55f03e294d18bd7a5c4c98974e157f6f84e7" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Sun Aug 14 13:00:58 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:27 2005 -0700" }, "message": "[PATCH] USB: schedule OSS USB drivers for removal\n\nDeprecate the OSS USB drivers.\n\nThis patch includes spelling fixes by Lee Revell.\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "4fbd55f03e294d18bd7a5c4c98974e157f6f84e7", "tree": "6202f82a40fb1de8699989da845604723543ecd6", "parents": [ "8f34c2883b894b9a97f07b23b5b86fd65ecd2f85" ], "author": { "name": "Dale Farnsworth", "email": "dale@farnsworth.org", "time": "Wed Aug 10 17:25:25 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:26 2005 -0700" }, "message": "[PATCH] USB: remove include of asm/usb.h in ohci-ppc-soc.c\n\nohci-ppc-soc.c provides for a platform-specific callback mechanism for\nwhen the HC is successfully probed or removed. It turned out that none\nof the 3 platforms using it need this facility. Also the required\ninclude/asm-ppc/usb.h has never been accepted. This patch removes the\ncallback feature and the include of \u003casm/usb.h\u003e.\n\nSigned-off-by: Dale Farnsworth \u003cdale@farnsworth.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "8f34c2883b894b9a97f07b23b5b86fd65ecd2f85", "tree": "2f2d396c8033c4ca1ab8aea81a0f6f2874c8b138", "parents": [ "f956e7cd9ac4618b98022020e638bbdc01d9d65a" ], "author": { "name": "david-b@pacbell.net", "email": "david-b@pacbell.net", "time": "Thu Aug 11 19:36:36 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:25 2005 -0700" }, "message": "[PATCH] USB: remove annoying message\n\nAvoid an annoying message that can appear if devices are disconnected\nin the middle of a USB scatterlist operation.\n\nMessage noted in http://bugzilla.kernel.org/show_bug.cgi?id\u003d4373\n(but the real issue there seems to be a SCSI level hang).\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "f956e7cd9ac4618b98022020e638bbdc01d9d65a", "tree": "d727c96bda9882323bf84b56d2dd09c9fb5e39b0", "parents": [ "3b4d7f79164853e10342d707e32307e0c8054982" ], "author": { "name": "david-b@pacbell.net", "email": "david-b@pacbell.net", "time": "Thu Aug 11 19:37:01 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:25 2005 -0700" }, "message": "[PATCH] USB: tweak highspeed timing calculations\n\nUse a more correct calculation for highspeed bit times.\n\n http://bugzilla.kernel.org/show_bug.cgi?id\u003d3604\n\nThis sort if thing might start to make a difference now that the high\nspeed periodic scheduler is more complete -- and even getting used.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "3b4d7f79164853e10342d707e32307e0c8054982", "tree": "6413fc59dacef3d757f06252f57fdb3c153d1a8f", "parents": [ "3ea15966ed59f2bc20928c7b0496b4585f6de206" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Thu Aug 11 15:50:32 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:22 2005 -0700" }, "message": "[PATCH] USB: Support unbinding of the usb_generic driver\n\nThis patch (as556) adds support for unbinding the usb_generic \"driver\".\nThat driver only binds to USB devices, as opposed to interfaces, and it\ndoes nothing much besides marking which struct device\u0027s go with an\noverall USB device plus providing suspend/resume methods. Now that\nusers can unbind drivers at will using the sysfs \"unbind\" attribute, we\nneed a rational way of dealing with USB devices that are no longer under\nfull control of the USB stack. The patch handles this by unconfiguring\nthe device, thereby removing all the interfaces and their associated\ndrivers and children.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "3ea15966ed59f2bc20928c7b0496b4585f6de206", "tree": "45c392aa393fe4ad245b6593b5a74f212f010637", "parents": [ "e52b1d3afe698cb77c080ecbe9e745257ff8c81b" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Thu Aug 11 10:15:39 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:21 2005 -0700" }, "message": "[PATCH] USB: Add timeout to usb_lock_device_for_reset\n\nThis patch (as555) modifies the already-awkward\nusb_lock_device_for_reset routine in usbcore by adding a timeout. The\nwhole point of the routine is that the caller wants to acquire some\nsemaphores in the wrong order; protecting against the possibility of\ndeadlock by timing out seems only prudent.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "e52b1d3afe698cb77c080ecbe9e745257ff8c81b", "tree": "92d1b8aeaeaa384aca703ec98bbc3e6dcbcad1e0", "parents": [ "ba44e7c407e248ed85d4f510728d0284373cf678" ], "author": { "name": "Dale Farnsworth", "email": "dale@farnsworth.org", "time": "Tue Aug 09 12:13:35 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:20 2005 -0700" }, "message": "[PATCH] USB: Fix typo in ohci-ppc-soc.c: usb_hcd_put \u003d\u003e usb_put_hcd\n\nSigned-off-by: Dale Farnsworth \u003cdale@farnsworth.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "ba44e7c407e248ed85d4f510728d0284373cf678", "tree": "042e9ccdbc0448d6d01262d92bc32ebcc4fc737f", "parents": [ "bf193d3cd2a3b73f2df74f57106114867946c09c" ], "author": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Tue Aug 09 15:04:00 2005 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:20 2005 -0700" }, "message": "[PATCH] USB: S3C24XX port numbering fix\n\nFix the port numbering confusion for the S3C24XX platform device\ninformation as reported by Rudy \u003crudyboy168@gmail.com\u003e\n\nThis patch ensurs that the the ports are numbered 0 and 1.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "bf193d3cd2a3b73f2df74f57106114867946c09c", "tree": "cc47350df18dd7bf00a3adb136476e1896f20c19", "parents": [ "8b28c7526a302bbfa618f7eab4ef961edd68c9a0" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Wed Aug 10 17:12:31 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:19 2005 -0700" }, "message": "[PATCH] USB: Disconnect children when unbinding the hub driver\n\nThis patch (as554) makes the hub driver disconnect any child USB devices\nwhen it is unbound from a hub. Normally this will never happen, but\nthere are a few oddball ways to unbind the hub driver while leaving the\nchildren intact. For example, the new \"unbind\" sysfs attribute can be\nused for this purpose.\n\nGiven that unbinding hubs with children is now safe, the patch also\nremoves the code that prevented people from doing so using usbfs.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "8b28c7526a302bbfa618f7eab4ef961edd68c9a0", "tree": "4a0e692239ccd523b9103af867419db3c1a4a997", "parents": [ "68a6457edb8a64fdcc231a4fc5406f6e3f6c9b33" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Wed Aug 10 17:04:13 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:19 2005 -0700" }, "message": "[PATCH] USB: Code motion in the hub driver\n\nThis patch (as553) merely moves some code and deletes an unneeded test in\nthe hub driver. This is in preparation for the patch that follows.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "68a6457edb8a64fdcc231a4fc5406f6e3f6c9b33", "tree": "4bef1b4ab18a23e7d14dc96577c95310d0e2b3d7", "parents": [ "242cf670c09c05504ce53dfc27f8331a072f169d" ], "author": { "name": "Daniel Drake", "email": "dsd@gentoo.org", "time": "Wed Aug 10 18:30:04 2005 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:28:18 2005 -0700" }, "message": "[PATCH] USB: Fix HP8200 detection in shuttle_usbat\n\nAdding flash-device support to the shuttle_usbat driver in 2.6.11\nintroduced the need to detect which type of device we are dealing with:\nCDRW drive, or flash media reader.\n\nThe detection routine used turned out to not work for HP8200 CDRW users,\nwho saw their devices being detected as a flash disk.\n\nThis patch (which has been tested on both flash and cdrom) removes some\nunnecessary code, moves device detection to much later during\ninitialization, and introduces a new detection routine which appears to\nwork.\n\nSigned-off-by: Daniel Drake \u003cdsd@gentoo.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "242cf670c09c05504ce53dfc27f8331a072f169d", "tree": "ddd30f63ed128818c94f46c5d3134e2566e07633", "parents": [ "b375a0495fd622037560c73c05f23ae6f127bb0c" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Jul 29 16:11:07 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:27:55 2005 -0700" }, "message": "[PATCH] USB: fix up URB_ASYNC_UNLINK usages from the usb-serial drivers\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "b375a0495fd622037560c73c05f23ae6f127bb0c", "tree": "7f800cfd288480625e6e9886b51aa6d159a1548e", "parents": [ "a4e628328ec60873fec9d506d682155391f589ce" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Fri Jul 29 16:11:07 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:23:04 2005 -0700" }, "message": "[PATCH] USB: URB_ASYNC_UNLINK flag removed from the kernel\n\n29 July 2005, Cambridge, MA:\n\nThis afternoon Alan Stern submitted a patch to remove the URB_ASYNC_UNLINK\nflag from the Linux kernel. Mr. Stern explained, \"This flag is a relic\nfrom an earlier, less-well-designed system. For over a year it hasn\u0027t\nbeen used for anything other than printing warning messages.\"\n\nAn anonymous spokesman for the Linux kernel development community\ncommented, \"This is exactly the sort of thing we see happening all the\ntime. As the kernel evolves, support for old techniques and old code can\nbe jettisoned and replaced by newer, better approaches. Proprietary\noperating systems do not have the freedom or flexibility to change so\nquickly.\"\n\nMr. Stern, a staff member at Harvard University\u0027s Rowland Institute who\nworks on Linux only as a hobby, noted that the patch (labelled as548) did\nnot update two files, keyspan.c and option.c, in the USB drivers\u0027 \"serial\"\nsubdirectory. \"Those files need more extensive changes,\" he remarked.\n\"They examine the status field of several URBs at times when they\u0027re not\nsupposed to. That will need to be fixed before the URB_ASYNC_UNLINK flag\nis removed.\"\n\nGreg Kroah-Hartman, the kernel maintainer responsible for overseeing all\nof Linux\u0027s USB drivers, did not respond to our inquiries or return our\ncalls. His only comment was \"Applied, thanks.\"\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "a4e628328ec60873fec9d506d682155391f589ce", "tree": "84d19df1b2730435254d7b005ca80fd715ba567c", "parents": [ "34008dbfe8c00eca67f97bad484eb5cb03bafe66" ], "author": { "name": "Matthew Dharm", "email": "mdharm-usb@one-eyed-alien.net", "time": "Thu Jul 28 14:50:29 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:55 2005 -0700" }, "message": "[PATCH] USB Storage: wedge SCSI revision at 2 for usb-storage devices\n\nThis patch started life as as479b, and has been rediffed. Please note\nthe order of submission of this latest patch series -- even tho this has\nan older original number, it is the last patch I\u0027ll be sending today.\n\nThis patch changes the reported SCSI revision level to 2 for all\ndisk-type devices. This is needed in a few cases because the device\nreports a level of 3 or higher but then crashes when given a REPORT LUNS\ncommand (for which support is supposed to be mandatory at those levels).\nThis shouldn\u0027t harm us, since it only matters for sparse LUNs and we\nhave separate ways of coping with that.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Matthew Dharm \u003cmdharm-usb@one-eyed-alien.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "34008dbfe8c00eca67f97bad484eb5cb03bafe66", "tree": "72b7a8dc823dc1f1e77041025c7572499e65db64", "parents": [ "26186ba77b493204ae0fadc3c88a67b14f22168f" ], "author": { "name": "Matthew Dharm", "email": "mdharm-usb@one-eyed-alien.net", "time": "Thu Jul 28 14:49:01 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:55 2005 -0700" }, "message": "[PATCH] USB Storage: add support for Maxtor One-Touch button\n\nThis patch is originally from Nick Sillik, and has been rediffed against\nthe latest tree.\n\nThis patch adds usability to the OneTouch Button on Maxtor External USB\nHard Drives. Using an unusual device entry it declares an extra init\nfunction which claims the interrupt endpoint associated with this\nbutton. The button is connected to the input system.\n\nSigned-off-by: Nick Sillik \u003cn.sillik@temple.edu\u003e\nSigned-off-by: Matthew Dharm \u003cmdharm-usb@one-eyed-alien.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "26186ba77b493204ae0fadc3c88a67b14f22168f", "tree": "6fc0d50a4d286df33b18f21e0994b09637d0c6c8", "parents": [ "77f46328fb83b64befd889ebce6d7fb959932509" ], "author": { "name": "Matthew Dharm", "email": "mdharm-usb@one-eyed-alien.net", "time": "Thu Jul 28 14:45:50 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:55 2005 -0700" }, "message": "[PATCH] USB Storage: close a race condition in disconnect near queuecommand\n\nThis patch started life as as534, and has been re-diffed against the latest\ntree.\n\nusb-storage has a small loophole, a window between the time queuecommand\naccepts a new command and the time the control thread starts to execute\nit. If disconnect is called during that window, the driver won\u0027t cancel\nthe pending command -- we\u0027ve been relying on the SCSI core to cancel it\nfor us during host removal. But it\u0027s better for usb-storage to cancel\nit; this avoids races and reduces reliance on the SCSI core.\nFortunately cancelling these commands is easy to do; the key is to do it\n_before_ calling scsi_remove_host.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Matthew Dharm \u003cmdharm-usb@one-eyed-alien.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "77f46328fb83b64befd889ebce6d7fb959932509", "tree": "c06b5e60d8463e548b49c73799b2327ecc4f09de", "parents": [ "0f64e078139109d1902e5b1274c23cec9a9ad12e" ], "author": { "name": "Matthew Dharm", "email": "mdharm-usb@one-eyed-alien.net", "time": "Thu Jul 28 14:44:29 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:54 2005 -0700" }, "message": "[PATCH] USB Storage: close a race condition in disconnect near probe\n\nThis patch started life as as533, and has been re-diffed against the\ncurrent tree.\n\nDisconnect processing in usb-storage naturally divides into two parts:\none to quiesce the driver (make sure no commands are executing or\nqueued) and remove the host, and the other to deallocate all the USB and\nnon-USB resources. This patch creates two subroutines to handle those\ntwo parts. Mostly it\u0027s just code movement, but there is one significant\nchange. If the scsi-scanning thread fails to initialize but the host\nhas successfully been added, we need to quiesce the driver before\nremoving the host. After all, it\u0027s possible that scanning could have\nbeen initiated from somewhere else, such as userspace -- very low\nprobability, but it\u0027s easily handled by calling the new subroutine.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Matthew Dharm \u003cmdharm-usb@one-eyed-alien.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "0f64e078139109d1902e5b1274c23cec9a9ad12e", "tree": "282cb78a17c0ed2dc403dc7712cda1fc348e2123", "parents": [ "9a57116bc9e36c9accc869f666e1d25c5e2cdcbf" ], "author": { "name": "Matthew Dharm", "email": "mdharm-usb@one-eyed-alien.net", "time": "Thu Jul 28 14:43:08 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:54 2005 -0700" }, "message": "[PATCH] USB Storage: remove dependency on SCSI-provided serial/tag number\n\nThis patch started life as as531 from Alan Stern. It has been rediffed\nagainst the latest tree.\n\nThe SCSI people have deprecated the use of scsi_cmnd.serial_number for\nanything other than printk. Worse than that, the SCSI core doesn\u0027t\nalways increment the number (when the error handler is running, for\nexample). So this patch creates a locally-stored value for use in\nbulk-only tags. The net result is a simplification, since we no longer\nhave to save \u0026 restore the serial_number value while autosensing.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Matthew Dharm \u003cmdharm-usb@one-eyed-alien.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "9a57116bc9e36c9accc869f666e1d25c5e2cdcbf", "tree": "64cd816ac2f9e119d8c1afd330e8f737ab643617", "parents": [ "f8d23d309809ae69c763520dababb7e845938272" ], "author": { "name": "Olav Kongas", "email": "ok@artecdesign.ee", "time": "Fri Aug 05 14:23:35 2005 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:48 2005 -0700" }, "message": "[PATCH] USB: Switch isp116x-hcd over to root hub interrupt\n\nSwitch isp116x-hcd over from root hub polling to interrupt. This change closes\nalso a race that was present with the old polling scheme: status polling could\nhappen in a time window, where root hub status bits were not stable.\n\nSigned-off-by: Olav Kongas \u003cok@artecdesign.ee\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "f8d23d309809ae69c763520dababb7e845938272", "tree": "0c07570e6de7e6978bd336be9fabfe1ecfee802b", "parents": [ "9d233d9faedfd8a4ee22288c1fdc698a6f75db21" ], "author": { "name": "Olav Kongas", "email": "ok@artecdesign.ee", "time": "Thu Aug 04 17:02:54 2005 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:48 2005 -0700" }, "message": "[PATCH] USB: isp116x-hcd: remove clock() and reset()\n\nThis patch removes support for user-provided platform-specific hardware reset\nand clock starting/stopping functions. Hardware reset was needed earlier as\ngetting the software reset working was tricky due to the lack of documentation.\nRecently, a number of people using isp116x have said the software reset is\nworking for them.\n\nI haven\u0027t heard of anybody using the clock starting/stopping.\n\nSigned-off-by: Olav Kongas \u003cok@artecdesign.ee\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "9d233d9faedfd8a4ee22288c1fdc698a6f75db21", "tree": "9787e48aa6c0c10e44e306b9a0bd1e5b25bf5d03", "parents": [ "165c0f39390212d7a517b80c3bb61cb8f1782fef" ], "author": { "name": "Olav Kongas", "email": "ok@artecdesign.ee", "time": "Thu Aug 04 16:54:08 2005 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:48 2005 -0700" }, "message": "[PATCH] USB: isp116x-hcd: per-port overcurrent reporting\n\nThis patch sets the isp116x to report overcurrent always per-port.\n\nSigned-off-by: Olav Kongas \u003cok@artecdesign.ee\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "165c0f39390212d7a517b80c3bb61cb8f1782fef", "tree": "d1ebe787ce1a506454c3a8b50e00890399382fc5", "parents": [ "d4d62861b5cdb0ecfcae448e4281623284de5d05" ], "author": { "name": "Olav Kongas", "email": "ok@artecdesign.ee", "time": "Thu Aug 04 16:52:31 2005 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:47 2005 -0700" }, "message": "[PATCH] USB: isp116x-hcd: support only per-port power switching\n\nThe isp116x chip will now always be in per-port power switching mode. Remove\nconf options to set any other mode.\n\nSigned-off-by: Olav Kongas \u003cok@artecdesign.ee\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d4d62861b5cdb0ecfcae448e4281623284de5d05", "tree": "d3ae4654ca852122e348db59e48cbd2d7778f285", "parents": [ "dc5bed091a7a5fe378055c30a2da874f77228b71" ], "author": { "name": "Olav Kongas", "email": "ok@artecdesign.ee", "time": "Thu Aug 04 16:48:19 2005 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:47 2005 -0700" }, "message": "[PATCH] USB: isp116x-hcd: remove unnecessary ClockNotStop configuration option\n\nSigned-off-by: Olav Kongas \u003cok@artecdesign.ee\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "dc5bed091a7a5fe378055c30a2da874f77228b71", "tree": "4b03155bc71c8a817c7edec8f62cbd4680e11624", "parents": [ "0d9899f8139b1e4ee84b97fb61615714fd40be5b" ], "author": { "name": "Olav Kongas", "email": "ok@artecdesign.ee", "time": "Thu Aug 04 16:46:28 2005 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:47 2005 -0700" }, "message": "[PATCH] USB: isp116x-hcd: use fixed power-on-to-power-good-time\n\nThis patch removes the power-on-to-power-good-time configuration option for\nisp116x-hcd.\n\nSigned-off-by: Olav Kongas \u003cok@artecdesign.ee\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "0d9899f8139b1e4ee84b97fb61615714fd40be5b", "tree": "a405be5b2cf45a32922229cc8f0f2a057db5f787", "parents": [ "0bc8e009a2d5106183ea31a2b83035e790778cab" ], "author": { "name": "david-b@pacbell.net", "email": "david-b@pacbell.net", "time": "Thu Jul 28 20:46:32 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:41 2005 -0700" }, "message": "[PATCH] USB: usbnet and unsigned gfp_flags\n\nThis just fixes some gfp flags warnings that joined us recently.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "0bc8e009a2d5106183ea31a2b83035e790778cab", "tree": "88bba601400a656f63274b77246befceba0d704b", "parents": [ "a1cf96efbabac2f8af6f75286ffcefd40b0a466c" ], "author": { "name": "Randy Dunlap", "email": "rdunlap@xenotime.net", "time": "Sun Jul 31 20:41:19 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:40 2005 -0700" }, "message": "[PATCH] USB usblp: rate-limit printer status error messages\n\nRate-limit usblp printer error status messages.\n\nI unplugged my USB printer and almost instantly got several hundred\nof these in my kernel message log:\ndrivers/usb/class/usblp.c: usblp0: error -19 reading printer status\n\nSigned-off-by: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "a1cf96efbabac2f8af6f75286ffcefd40b0a466c", "tree": "c5fefdf36832ccbef94c5e168cb67705b6275b20", "parents": [ "6c1eb8c1c3ec2df00b629ab4fe7fe04a95129f08" ], "author": { "name": "Pete Zaitcev", "email": "zaitcev@redhat.com", "time": "Sun Aug 14 21:16:03 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:40 2005 -0700" }, "message": "[PATCH] USB: ub 4: Zaitcev\u0027s quasi-S/G\n\nBack out Axboe-style quasi-S/G and replace it with one command and\nrepeated URBs. This is similar to what usb-storage does, only instead\nof a few URBs allocated together, one URB is reused.\n\nJens\u0027s idea was very nice, but it collapsed when I had to support\npacket commads for CD burning. I cannot issue two or more packet\ncommands where application expected only one.\n\nHowever, burning does not work completely yet. The cdrecord starts,\nrecognizes the device, then aborts without writing a TOC.\n\nSigned-off-by: Pete Zaitcev \u003czaitcev@yahoo.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "6c1eb8c1c3ec2df00b629ab4fe7fe04a95129f08", "tree": "a310bcbb2a846b76c5cab66a16b72a20c7cc7733", "parents": [ "07d4fd2566ddbf2a91ff3cde80ddf449ab82c381" ], "author": { "name": "Pete Zaitcev", "email": "zaitcev@redhat.com", "time": "Sat Jul 30 22:51:52 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:40 2005 -0700" }, "message": "[PATCH] USB: ub 3/3: death to ub_bd_rq_fn_1\n\nWhen Al Viro saw the ub.c, he observed that it was a proof positive of\nLinus not reading patches anymore: names like fo_ob_ar_ba_2 used to\ncause serious fireworks. In my defence, any good scheme can be pushed\nto the realm of absurd if pushed far enough.\n\nSigned-off-by: Pete Zaitcev \u003czaitcev@yahoo.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "07d4fd2566ddbf2a91ff3cde80ddf449ab82c381", "tree": "44fac2d34e9231835515abfb8fbd18239680feed", "parents": [ "ba6abf1352dc83e500a71e3ad9b39de0337f0c6b" ], "author": { "name": "Pete Zaitcev", "email": "zaitcev@redhat.com", "time": "Sat Jul 30 22:51:45 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:39 2005 -0700" }, "message": "[PATCH] USB: ub 2/3: Fold one line\n\nEvidently, Yani Ioannou\u0027s display is wider than mine.\n\nSigned-off-by: Pete Zaitcev \u003czaitcev@yahoo.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "ba6abf1352dc83e500a71e3ad9b39de0337f0c6b", "tree": "9ffeef3d2e7c36798ff38ffc450b1d3fb15c7174", "parents": [ "64be07585893d207d23f8516948222faf746aa43" ], "author": { "name": "Pete Zaitcev", "email": "zaitcev@redhat.com", "time": "Sat Jul 30 22:38:30 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:39 2005 -0700" }, "message": "[PATCH] USB: ub 1/3: Axboe\u0027s quasi-S/G\n\nThis the quasi-S/G patch for ub as suggested by Jens Axboe at OLS and\nimplemented that night before 4 a.m. Surprisingly, it worked right away...\nAlas, I had to skip some OLS partying, but it was for the good cause.\nNow the speed of ub is quite acceptable even on partitions with small\nblock size.\n\nThe ub does not really support S/G. Instead, it just tells the block\nlayer that it does. Then, most of the time, the block layer merges\nrequests and passes single-segmnent requests down to ub; everything\nworks as before. Very rarely ub gets an unmerged S/G request. In such\ncase, it issues several commands to the device.\n\nI added a small array of counters to monitor the merging (sg_stat).\nThis may be dropped later.\n\nSigned-off-by: Pete Zaitcev \u003czaitcev@yahoo.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "64be07585893d207d23f8516948222faf746aa43", "tree": "7148a4eae886230083df9be8eb90479e614cfe7b", "parents": [ "fad21bdf56a25e1cb3e92bba33349de368e8f0b0" ], "author": { "name": "Mihnea-Costin Grigore", "email": "mihnea@zulu.ro", "time": "Fri Jul 29 13:48:48 2005 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:38 2005 -0700" }, "message": "[PATCH] usb-storage: Add IGNORE_RESIDUE flag for Mitsumi USB 2.0 card reader (VIA hardware)\n\nThis patch adds an entry in the unusual_devs.h file for a Mitsumi card\nreader/floppy combo that uses a VIA chipset. The IGNORE_RESIDUE flag was\nneeded for the second LUN to operate properly.\n\nSigned-off-by: Mihnea-Costin Grigore \u003cmihnea@zulu.ro\u003e\nSigned-off-by: Phil Dibowitz \u003cphil@ipom.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "fad21bdf56a25e1cb3e92bba33349de368e8f0b0", "tree": "9a57267610a5cf039602557c02a4c5035635f5a2", "parents": [ "fbf82fd2e1f4e679c60516d772d1862c941ca845" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Wed Aug 10 15:15:57 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:30 2005 -0700" }, "message": "[PATCH] USB: Fix regression in core/devio.c\n\nThis patch (as551) fixes another little problem recently added to the\nUSB core. Someone didn\u0027t fix the type of the first argument to\nunregister_chrdev_region.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "fbf82fd2e1f4e679c60516d772d1862c941ca845", "tree": "85aee08e665076cf90251e705db13f03b136ce0a", "parents": [ "22af8878d2d641c6b15fe39fe4de3c05b2c477f0" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Sun Jul 31 01:05:53 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:29 2005 -0700" }, "message": "[PATCH] USB: real nodes instead of usbfs\n\nThis patch introduces a /sys/class/usb_device/ class\nwhere every connected usb-device will show up:\n\n tree /sys/class/usb_device/\n /sys/class/usb_device/\n |-- usb1.1\n | |-- dev\n | `-- device -\u003e ../../../devices/pci0000:00/0000:00:1d.0/usb1\n |-- usb2.1\n | |-- dev\n | `-- device -\u003e ../../../devices/pci0000:00/0000:00:1d.1/usb2\n ...\n\nThe presence of the \"dev\" file lets udev create real device nodes.\n kay@pim:~/src/linux-2.6\u003e tree /dev/bus/usb/\n /dev/bus/usb/\n |-- 1\n | `-- 1\n |-- 2\n | `-- 1\n ...\n\nudev rule:\n SUBSYSTEM\u003d\"usb_device\", PROGRAM\u003d\"/sbin/usb_device %k\", NAME\u003d\"%c\"\n (echo $1 | /bin/sed \u0027s/usb\\([0-9]*\\)\\.\\([0-9]*\\)/bus\\/usb\\/\\1\\/\\2/\u0027)\n\nThis makes libusb pick up the real nodes instead of the mounted usbfs:\n export USB_DEVFS_PATH\u003d/dev/bus/usb\n\nBackground:\n All this makes it possible to manage usb devices with udev instead of\n the devfs solution. We are currently working on a pam_console/resmgr\n replacement driven by udev and a pam-helper. It applies ACL\u0027s to device\n nodes, which is required for modern desktop functionalty like\n \"Fast User Switching\" or multiple local login support.\n\nNew patch with its own major. I\u0027ve succesfully disabled usbfs and use real\nnodes only on my box. With: \"export USB_DEVFS_PATH\u003d/dev/bus/usb\" libusb picks\nup the udev managed nodes instead of reading usbfs files.\n\nThis makes udev to provide symlinks for libusb to pick up:\n SUBSYSTEM\u003d\"usb_device\", PROGRAM\u003d\"/sbin/usbdevice %k\", SYMLINK\u003d\"%c\"\n\n/sbin/usbdevice:\n #!/bin/sh\n echo $1 | /bin/sed \u0027s/usbdev\\([0-9]*\\)\\.\\([0-9]*\\)/bus\\/usb\\/\\1\\/\\2/\u0027\n\nSigned-off-by: Kay Sievers \u003ckay.sievers@suse.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "22af8878d2d641c6b15fe39fe4de3c05b2c477f0", "tree": "8a034d93462e25f0edf84ba4b273f1b24bed9f0a", "parents": [ "e6ac4a40e5f5c58f6e1058f6b3fb98be921dc7f4" ], "author": { "name": "Andrew de Quincey", "email": "adq_dvb@lidskialf.net", "time": "Thu Aug 04 23:16:12 2005 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:29 2005 -0700" }, "message": "[PATCH] USB: Prevent hid-core claiming Apple Bluetooth device on new G4 powerbooks\n\nTo recap: My new G4 powerbook has a bluetooth device that boots up in\nwhat apppears to be a compatability mode - it looks exactly like an HID\nkeyboard/mouse device.\n\nA special command sequence is sent to switch it into full bluetooth\nmode. When this occurs the original HID device vanishes, and a new\n(bluetooth HID) USB device appears on the bus with a different product\nID.\n\nThe original thread is here:\nhttp://sourceforge.net/mailarchive/message.php?msg_id\u003d12532263\n\nThe attached patch adds the device to the hid-core quirks so that\nhid-core ignores it.\n\nSigned-off-by: Andrew de Quincey \u003cadq_dvb@lidskialf.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "e6ac4a40e5f5c58f6e1058f6b3fb98be921dc7f4", "tree": "81ff745ad3b85143340b6fc5280c5e6e6fcc5387", "parents": [ "fdcb0a0f1b8b050cbb7ed0ea2e030741ce5bb517" ], "author": { "name": "Ian Abbott", "email": "abbotti@mev.co.uk", "time": "Tue Aug 02 14:01:27 2005 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:29 2005 -0700" }, "message": "[PATCH] USB ftdi_sio: New IDs for ELV, Xsens and Falcom products\n\nThis patch for the ftdi_sio driver adds a bunch of new devices and fixes\nan incorrect PID:\n\no Fix PID for ELV UO100 (the PID was in fact for ELV UR100).\no Add PID ELV UR100 (see above) and ELV ALC 8500 Expert.\no Add a whole bunch of other PIDs for ELV USB devices, commented out for\n now as they may be used by other drivers eventually. (Christian Abt\n of ELV.de submitted a full list of devices including an indication of\n which set of drivers are used by default in the MS Windows world. We\n decided to comment out the devices that use FTDI\u0027s D2XX Windows\n drivers by default.)\no Add PIDs for eight devices from Xsens Technologies BV (submitted in a\n patch against 2.6.12.2 by Patrick Riphagen).\no Add PID for Falcom Samba GPRS modem (submitted by Sebastian Schubert).\n\nSigned-off-by: Ian Abbott \u003cabbotti@mev.co.uk\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "fdcb0a0f1b8b050cbb7ed0ea2e030741ce5bb517", "tree": "c0bfa1f6c213ea21ace7f2c79b211ad2beef2996", "parents": [ "1694899fd1af43636351aac97f415fd3c9cefb1d" ], "author": { "name": "Ian Abbott", "email": "abbotti@mev.co.uk", "time": "Thu Jul 28 18:40:32 2005 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:28 2005 -0700" }, "message": "[PATCH] USB ftdi_sio: user specified VID/PID\n\nftdi_sio: Support one user specified vendor and product ID via a couple\nof new module parameters.\n\nSigned-off-by: Ian Abbott \u003cabbotti@mev.co.uk\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "1694899fd1af43636351aac97f415fd3c9cefb1d", "tree": "d849892672ad4441f7539322680158e3f928b1db", "parents": [ "ef0840286045fe7ce84cb77e7608f0844c81001c" ], "author": { "name": "Dariusz M", "email": "D.Marcinkiewicz@elka.pw.edu.pl", "time": "Thu Jul 28 18:06:13 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:28 2005 -0700" }, "message": "[PATCH] USB: pl2303 driver, makes pl2303HX chip work correctly\n\nThis trivial patch makes pl2303 driver work correctly with pl2303HX chip.\nApparently some bug in HX version of pl2303 makes the chip loose some\ntransmitted bytes or stop working at all after reception of\nUSB_REQ_CLEAR_FEATURE mesage. Logs generated by UsbSnoop application reveal\nthat windows driver does not send this type of messages to the converter.\n\nFrom: \"Dariusz M.\" \u003cD.Marcinkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "ef0840286045fe7ce84cb77e7608f0844c81001c", "tree": "fe03d6020b1b9627abe85630d71cfdfc0d6f06a1", "parents": [ "91e79c91fab10f5790159d8d0c1d16da2a9653f9" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jul 27 01:06:19 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:17 2005 -0700" }, "message": "[PATCH] USB: fix keyspan_remote endian bug on probe\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "91e79c91fab10f5790159d8d0c1d16da2a9653f9", "tree": "a557a39bfe9dce508317baf7cd2e5217ac6f0c5d", "parents": [ "81671ddb7e24e9d1f84812dba8ed810935f77d40" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Jul 13 15:18:30 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:16 2005 -0700" }, "message": "[PATCH] USB: Gadget library: centralize gadget controller numbers\n\nThis patch centralizes the assignment of bcdDevice numbers for different\ngadget controllers. This won\u0027t improve the object code at all, but it\ndoes save a lot of repetitive and error-prone source code ... and will\nsimplify the work of supporting a new controller driver, since most new\ngadget drivers will no longer need patches (unless some hardware quirks\nlimit USB protocol messaging).\n\nAdded minor cleanups and identifer hooks for the UDC in the Freescale\niMX series processors.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "81671ddb7e24e9d1f84812dba8ed810935f77d40", "tree": "bc902a61ffd2c09ddbf3d7c20a67b0831d612862", "parents": [ "7bb75aeeeec7417a961920b3f63a83007475260f" ], "author": { "name": "Tobias Klauser", "email": "tklauser@nuerscht.ch", "time": "Mon Jul 04 19:32:51 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:16 2005 -0700" }, "message": "[PATCH] USB: drivers/serial/usb-serial: Remove unneeded void * casts\n\nThe following patch removes unneeded casts for the following (void *) pointers:\n\t- tty_struct-\u003edriver_data\n\t- void *private argument of usb_serial_port_softint()\n\nSigned-off-by: Tobias Klauser \u003ctklauser@nuerscht.ch\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "7bb75aeeeec7417a961920b3f63a83007475260f", "tree": "f96fc9e827db52efe44ca7822c3fbb5f63db8b08", "parents": [ "b9db07fba7f113764d7379b0f68324a9a5450306" ], "author": { "name": "Andrew Morton", "email": "akpm@osdl.org", "time": "Wed Jul 27 01:08:30 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:15 2005 -0700" }, "message": "[PATCH] USB: option card driver coding style tweaks\n\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "b9db07fba7f113764d7379b0f68324a9a5450306", "tree": "c2a5672a733688fad64cccf623131605a1cbf943", "parents": [ "4e1491847ef5ca1c5a661601d5f96dcb7d90d2f0" ], "author": { "name": "Lonnie Mendez", "email": "lmendez19@austin.rr.com", "time": "Tue Jul 12 17:21:31 2005 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 16:22:15 2005 -0700" }, "message": "[PATCH] USB: whitespace fixes for cypress_m8 driver\n\nReading this driver I noticed some trailing whitespaces and tabs so I\nremoved them with some 80th column fitting and a few more similar\nthings.\n\nFrom: Carlo Perassi \u003ccarlo@linux.it\u003e\nSigned-off-by: Lonnie Mendez \u003cdignome@gmail.com\u003e\nSigned-off-by: Carlo Perassi \u003ccarlo@linux.it\u003e\nSigned-off-by: Domen Puncer \u003cdomen@coderock.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "6d8de3a26b5c20b04a9317b4446582167d5883da", "tree": "aa71ab52059380fa2bbdcee4a0cf559a9dacdf01", "parents": [ "7bbedd521310547ca73cc77adcf61fb85723adc3", "0a25e4d5647003a32ba5496f9d0f40ba9c1e3863" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:55:53 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:55:53 2005 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/w1-2.6 \n" }, { "commit": "7bbedd521310547ca73cc77adcf61fb85723adc3", "tree": "f759d90c46bfbc48a9f396c9c6f839da11cdc6aa", "parents": [ "f44702f49056c203341badaa2cb8a706160d9119", "a04ce0ffcaf561994ecf382cd3caad75556dc499" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:55:23 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:55:23 2005 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 \n" }, { "commit": "f44702f49056c203341badaa2cb8a706160d9119", "tree": "72e2c6521db08690165aa4167d7b74941d020b22", "parents": [ "27e2df2228712af43e657b9768828448c64ba424", "4d803fcdcd97dd346d4b39c3b76e5879cead8a31" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:54:53 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:54:53 2005 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 \n" }, { "commit": "27e2df2228712af43e657b9768828448c64ba424", "tree": "1c86905fd366e8af66ea75bfd34a50f7084e0869", "parents": [ "c0d6f9663b30a09ed725229b2d50391268c8538e", "e104411b82f5c4d19752c335492036abdbf5880d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:52:11 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:52:11 2005 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 \n" }, { "commit": "c0d6f9663b30a09ed725229b2d50391268c8538e", "tree": "7ba471cf9632097682ab55689cd64c9a68e11235", "parents": [ "0db7443b2bd0b92da4e8afa46f8123a7076136c6", "6fd60fa97b706e52abba7c9f810b148aa230817f" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:43:09 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:43:09 2005 -0700" }, "message": "Merge master.kernel.org:/home/rmk/linux-2.6-i2c manually\n\nOld tree, so the automatic merge had some problems.\n" }, { "commit": "0db7443b2bd0b92da4e8afa46f8123a7076136c6", "tree": "325c388b7d99015896b583dfec775a837957b762", "parents": [ "63068465fa9ba8258e341f70c07cd2221b8c114d", "6df29debb7fc04ac3f92038c57437f40bab4e72d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:30:14 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:30:14 2005 -0700" }, "message": "Merge master.kernel.org:/home/rmk/linux-2.6-serial \n" }, { "commit": "63068465fa9ba8258e341f70c07cd2221b8c114d", "tree": "79ec2bc8af8b95c09479ddc0661b2dec89281e92", "parents": [ "35b7ac4c48fa851600c028e088d2239a2cf3dfca", "c26971cbb39727b0b692c6236f890ba13046a663" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:28:16 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:28:16 2005 -0700" }, "message": "Merge master.kernel.org:/home/rmk/linux-2.6-mmc \n" }, { "commit": "35b7ac4c48fa851600c028e088d2239a2cf3dfca", "tree": "13ab1abd15403eb1bc2099552b5f8c226596b838", "parents": [ "4e1491847ef5ca1c5a661601d5f96dcb7d90d2f0", "61c8c158c828073cfebf11ca8e340727feafa038" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:26:48 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Sep 08 15:26:48 2005 -0700" }, "message": "Merge master.kernel.org:/home/rmk/linux-2.6-arm \n" }, { "commit": "e104411b82f5c4d19752c335492036abdbf5880d", "tree": "03f26f98685689ab6bfa47d5bdbb6730f64bfadb", "parents": [ "cf0b450cd5176b68ac7d5bbe68aeae6bb6a5a4b8" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Thu Sep 08 15:11:55 2005 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Sep 08 15:11:55 2005 -0700" }, "message": "[XFRM]: Always release dst_entry on error in xfrm_lookup\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cf0b450cd5176b68ac7d5bbe68aeae6bb6a5a4b8", "tree": "22ec54e42593aefd2d1a5fa07cd6a2f1b0f2f37b", "parents": [ "a57ebc90f1350296edded12d33d7c278831bc3bf" ], "author": { "name": "Herbert Xu", "email": "herbert@gondor.apana.org.au", "time": "Thu Sep 08 15:10:52 2005 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Sep 08 15:10:52 2005 -0700" }, "message": "[TCP]: Fix off by one in tcp_fragment() \"already sent\" test.\n\nSigned-off-by: Herbert Xu \u003cherbert@gondor.apana.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "61c8c158c828073cfebf11ca8e340727feafa038", "tree": "0cc1d9e29d6c799b91802938e4ec054f9082d08b", "parents": [ "0dffefbf1a26ee0661d47516420d86b485a08e9c" ], "author": { "name": "Nicolas Pitre", "email": "nico@cam.org", "time": "Thu Sep 08 23:07:40 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Sep 08 23:07:40 2005 +0100" }, "message": "[ARM] 2892/1: remove gcc workaround for direct access to absolute memory addresses\n\nPatch from Nicolas Pitre\n\nIt used to make a difference in the gcc-2.95 era. However these days\nmodern gcc apparently got better at not being influenced by such constructs\n(which is good in general) and therefore such workaround is of no real\nadvantage anymore.\nThe good news is that gcc (from version 4.1.0) is now fixed with\nregards to the defficiency this workaround was trying to address.\nFor those interested the patch can easily be backported to older gcc\nversions and can be found here:\nhttp://gcc.gnu.org/cgi-bin/cvsweb.cgi/gcc/gcc/config/arm/arm.c.diff?r1\u003d1.476\u0026r2\u003d1.478\nand also here:\nhttp://savannah.gnu.org/cgi-bin/viewcvs/gcc/gcc/gcc/config/arm/arm.c.diff?r1\u003dtext\u0026tr1\u003d1.476\u0026r2\u003dtext\u0026tr2\u003d1.478\u0026diff_format\u003du\n\nSigned-off-by: Nicolas Pitre \u003cnico@cam.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "0dffefbf1a26ee0661d47516420d86b485a08e9c", "tree": "5952760a57474493d408e95af351962355f90d79", "parents": [ "7c38cf021b42a4297bc8f860ab627734bdd6c8d1" ], "author": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Thu Sep 08 23:07:39 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Sep 08 23:07:39 2005 +0100" }, "message": "[ARM] 2891/1: S3C2410 - update s3c2410_defconfig for 2.6.13\n\nPatch from Ben Dooks\n\nUpdated the s3c2410_defconfig for the 2.6.13-git8\nkernel release, as well as adding the Anubis\nboard to the list of boards built.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "7c38cf021b42a4297bc8f860ab627734bdd6c8d1", "tree": "89c3b807ca90f5c7e5692ddbcd388511dc289530", "parents": [ "d7b6b3589471c3856f1e6dc9c77abc4af962ffdb" ], "author": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Thu Sep 08 23:07:38 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Sep 08 23:07:38 2005 +0100" }, "message": "[ARM] 2890/1: OMAP 1/4: Update omap1 specific files, take 2\n\nPatch from Tony Lindgren\n\nThis patch syncs the mainline kernel with linux-omap tree.\nThe highlights of the patch are:\n- Convert more drivers to register resources in board-*.c to take\n advantage of the driver model by David Brownell and Ladislav Michl\n- Use set_irq_type() for GPIO interrupts instead of\n omap_set_gpio_edge_ctrl() by David Brownell\n- Add minimal support for handling optional add-on boards, such as\n OSK Mistral board with LCD and keypad, by David Brownell\n- Minimal support for loading functions to SRAM by Tony Lindgren\n- Wake up from serial port by muxing RX lines temporarily into GPIO\n interrupts by Tony Lindgren\n- 32KHz sched_clock by Tony Lindgren and Juha Yrjola\n\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "a04ce0ffcaf561994ecf382cd3caad75556dc499", "tree": "e891a767810333fe2bf29ddb35f57b0a3ec6e18e", "parents": [ "3fe9d19f9e86a55679f5f2b38ec0a43a1a510cee" ], "author": { "name": "Brett M Russ", "email": "russb@emc.com", "time": "Mon Aug 15 15:23:41 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 15:07:08 2005 -0700" }, "message": "[PATCH] PCI/libata INTx cleanup\n\nSimple cleanup to eliminate X copies of the pci_enable_intx() function\nin libata. Moved ahci.c\u0027s pci_intx() to pci.c and use it throughout\nlibata and msi.c.\n\nSigned-off-by: Brett Russ \u003crussb@emc.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "3fe9d19f9e86a55679f5f2b38ec0a43a1a510cee", "tree": "96a3e57f3b61c137bb8904a08779aa8ab41c2559", "parents": [ "cecf4864cf52a4a243a62b2856a6a155edbb55e8" ], "author": { "name": "Daniel Ritz", "email": "daniel.ritz@gmx.ch", "time": "Wed Aug 17 15:32:19 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 15:04:30 2005 -0700" }, "message": "[PATCH] PCI: Support PCM PM CAP version 3\n\n- support PCI PM CAP version 3 (as defined in PCI PM Interface Spec v1.2)\n\n- pci/probe.c sets the PM state initially to 4 which is D3cold. add a\n PCI_UNKNOWN\n\n- minor cleanups\n\nSigned-off-by: Daniel Ritz \u003cdaniel.ritz@gmx.ch\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "cecf4864cf52a4a243a62b2856a6a155edbb55e8", "tree": "ffbf170ed0208e81e9561dca3ad7786c362a7024", "parents": [ "1d2450a4a6eb656798c6282b5ffc8e5f9f52ac14" ], "author": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Thu Aug 18 14:33:01 2005 +1000" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 15:04:30 2005 -0700" }, "message": "[PATCH] PCI: Add pci_walk_bus function to PCI core (nonrecursive)\n\nThe PCI error recovery infrastructure needs to be able to contact all\nthe drivers affected by a PCI error event, which may mean traversing\nall the devices under a given PCI-PCI bridge. This patch adds a\nfunction to the PCI core that traverses all the PCI devices on a PCI\nbus and under any PCI-PCI bridges on that bus (and so on), calling a\ngiven function for each device. This provides a way for the error\nrecovery code to iterate through all devices that are affected by an\nerror event.\n\nThis version is not implemented as a recursive function. Instead,\nwhen we reach a PCI-PCI bridge, we set the pointers to start doing the\ndevices on the bus under the bridge, and when we reach the end of a\nbus\u0027s devices, we use the bus-\u003eself pointer to go back up to the next\nhigher bus and continue doing its devices.\n\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "1d2450a4a6eb656798c6282b5ffc8e5f9f52ac14", "tree": "4537680974632dc626368d4fe53e932243d13ac1", "parents": [ "c9d8073fd2a0bcb5df973654e988282b523cf553" ], "author": { "name": "Prarit Bhargava", "email": "prarit@sgi.com", "time": "Fri Aug 12 10:13:34 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:25 2005 -0700" }, "message": "[PATCH] PCI Hotplug: SGI hotplug driver fixes\n\nThese fixes were suggested by pcihpd-discuss, but were dropped in the\ninitial checkin of the code. These fixes include cleaning up the\nhotplug driver sysfs filename, and some minor code cleanups. The driver\nalso requires at least PROM 4.30, not 4.20.\n\nSigned-off-by: Prarit Bhargava \u003cprarit@sgi.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "c9d8073fd2a0bcb5df973654e988282b523cf553", "tree": "3d805afabce3f64466b4360839a3596befa95338", "parents": [ "11f3859b1e85dd408756c72e228cfb5aa7230c87" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Wed Aug 10 02:09:39 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:25 2005 -0700" }, "message": "[PATCH] PCI: remove pci_find_device from parport_pc.c\n\nThis patch changes pci_find_device to pci_get_device (encapsulated in\nfor_each_pci_dev).\n\nSigned-off-by: Jiri Slaby \u003cxslaby@fi.muni.cz\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "11f3859b1e85dd408756c72e228cfb5aa7230c87", "tree": "c3bbf898ee5c45299dd111853c9756a594fa6ecf", "parents": [ "95a629657dbe28e44a312c47815b3dc3f1ce0970" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Wed Aug 10 15:18:44 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:25 2005 -0700" }, "message": "[PATCH] PCI: Fix regression in pci_enable_device_bars\n\nThis patch (as552) fixes yet another small problem recently added. If an\nattempt to put a PCI device back into D0 fails because the device doesn\u0027t\nsupport PCI PM, it shouldn\u0027t count as error. Without this patch the UHCI\ncontrollers on my Intel motherboard don\u0027t work.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "95a629657dbe28e44a312c47815b3dc3f1ce0970", "tree": "0e48656b5d61e26078a50af9f6766e52934fbedf", "parents": [ "085ae41f66657a9655ce832b0a61832a06f0e1dc" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jul 28 11:37:33 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:25 2005 -0700" }, "message": "[PATCH] PCI: start paying attention to a lot of pci function return values\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "085ae41f66657a9655ce832b0a61832a06f0e1dc", "tree": "215690b947b14fa18cbb2810db1a4082ad607e7a", "parents": [ "064b53dbcc977dbf2753a67c2b8fc1c061d74f21" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Aug 08 13:19:08 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:25 2005 -0700" }, "message": "[PATCH] Make sparc64 use setup-res.c\n\nThere were three changes necessary in order to allow\nsparc64 to use setup-res.c:\n\n1) Sparc64 roots the PCI I/O and MEM address space using\n parent resources contained in the PCI controller structure.\n I\u0027m actually surprised no other platforms do this, especially\n ones like Alpha and PPC{,64}. These resources get linked into the\n iomem/ioport tree when PCI controllers are probed.\n\n So the hierarchy looks like this:\n\n iomem --|\n\t PCI controller 1 MEM space --|\n\t\t\t\t device 1\n\t\t\t\t\tdevice 2\n\t\t\t\t\tetc.\n\t PCI controller 2 MEM space --|\n\t\t\t\t ...\n ioport --|\n PCI controller 1 IO space --|\n\t\t\t\t\t...\n PCI controller 2 IO space --|\n\t\t\t\t\t...\n\n You get the idea. The drivers/pci/setup-res.c code allocates\n using plain iomem_space and ioport_space as the root, so that\n wouldn\u0027t work with the above setup.\n\n So I added a pcibios_select_root() that is used to handle this.\n It uses the PCI controller struct\u0027s io_space and mem_space on\n sparc64, and io{port,mem}_resource on every other platform to\n keep current behavior.\n\n2) quirk_io_region() is buggy. It takes in raw BUS view addresses\n and tries to use them as a PCI resource.\n\n pci_claim_resource() expects the resource to be fully formed when\n it gets called. The sparc64 implementation would do the translation\n but that\u0027s absolutely wrong, because if the same resource gets\n released then re-claimed we\u0027ll adjust things twice.\n\n So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource()\n conversion before passing it on to pci_claim_resource().\n\n3) I was mistakedly __init\u0027ing the function methods the PCI controller\n drivers provide on sparc64 to implement some parts of these\n routines. This was, of course, easy to fix.\n\nSo we end up with the following, and that nasty SPARC64 makefile\nifdef in drivers/pci/Makefile is finally zapped.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "064b53dbcc977dbf2753a67c2b8fc1c061d74f21", "tree": "39efa08fb7b0b7991bbfc4772f4fc3de0e8d11fa", "parents": [ "1248d636122e4ec9d7802b850904e3bb48a0da23" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jul 27 10:19:44 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:24 2005 -0700" }, "message": "[PATCH] PCI: restore BAR values after D3hot-\u003eD0 for devices that need it\n\nSome PCI devices (e.g. 3c905B, 3c556B) lose all configuration\n(including BARs) when transitioning from D3hot-\u003eD0. This leaves such\na device in an inaccessible state. The patch below causes the BARs\nto be restored when enabling such a device, so that its driver will\nbe able to access it.\n\nThe patch also adds pci_restore_bars as a new global symbol, and adds a\ncorrepsonding EXPORT_SYMBOL_GPL for that.\n\nSome firmware (e.g. Thinkpad T21) leaves devices in D3hot after a\n(re)boot. Most drivers call pci_enable_device very early, so devices\nleft in D3hot that lose configuration during the D3hot-\u003eD0 transition\nwill be inaccessible to their drivers.\n\nDrivers could be modified to account for this, but it would\nbe difficult to know which drivers need modification. This is\nespecially true since often many devices are covered by the same\ndriver. It likely would be necessary to replicate code across dozens\nof drivers.\n\nThe patch below should trigger only when transitioning from D3hot-\u003eD0\n(or at boot), and only for devices that have the \"no soft reset\" bit\ncleared in the PM control register. I believe it is safe to include\nthis patch as part of the PCI infrastructure.\n\nThe cleanest implementation of pci_restore_bars was to call\npci_update_resource. Unfortunately, that does not currently exist\nfor the sparc64 architecture. The patch below includes a null\nimplemenation of pci_update_resource for sparc64.\n\nSome have expressed interest in making general use of the the\npci_restore_bars function, so that has been exported to GPL licensed\nmodules.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "1248d636122e4ec9d7802b850904e3bb48a0da23", "tree": "ca41930bb82ce02147f58df7b288fdf8a6b3e9b2", "parents": [ "346d38823b59d65c3c1365971776b52e0661b7e5" ], "author": { "name": "Kristen Accardi", "email": "kristen.c.accardi@intel.com", "time": "Fri Aug 05 12:16:06 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:24 2005 -0700" }, "message": "[PATCH] PCI Hotplug: use bus_slot number for name\n\nFor systems with multiple hotplug controllers, you need to use more than\njust the slot number to uniquely name the slot. Without a unique slot\nname, the pci_hp_register() will fail. This patch adds the bus number\nto the name.\n\nSigned-off-by: Kristen Carlson Accardi \u003ckristen.c.accardi@intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "346d38823b59d65c3c1365971776b52e0661b7e5", "tree": "fb51cb27e7f4192ca88ea2966a1e14d5e8991847", "parents": [ "4352dfd5cd9172f1ee425924a463b43e6157b840" ], "author": { "name": "Michael S. Tsirkin", "email": "mst@mellanox.co.il", "time": "Sun Jul 31 11:51:45 2005 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:24 2005 -0700" }, "message": "[PATCH] arch/386/pci: remap_pfn_range -\u003e io_remap_pfn_range\n\nConvert i386/pci to use io_remap_pfn_range instead of remap_pfn_range.\nThis is good for Xen which reuses i386/pci/i386.c for domain 0 code.\n\nSigned-off-by: Michael S. Tsirkin \u003cmst@mellanox.co.il\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "4352dfd5cd9172f1ee425924a463b43e6157b840", "tree": "d5e02a5769e8907b58c2490d6acc22feb1814f88", "parents": [ "8fdc23ee1ab7c1f8f1dd40602f62b9cc84072531" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jul 28 11:37:33 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:24 2005 -0700" }, "message": "[PATCH] PCI: clean up pci.h and split pci register info to separate header file.\n\nThis cleans up some of the #ifdef CONFIG_PCI stuff up, and moves the pci register\ninfo out to a separate file, where it belongs. Eventually we can stop including\nthis file from within pci.h, but lots of code needs to be audited first.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "8fdc23ee1ab7c1f8f1dd40602f62b9cc84072531", "tree": "be78aa954e7062d55afd3bca108e272944ea1580", "parents": [ "982245f01734e9d5a3ab98b2b2e9761ae7719094" ], "author": { "name": "Andrew Morton", "email": "akpm@osdl.org", "time": "Wed Jul 27 00:07:11 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:24 2005 -0700" }, "message": "[PATCH] PCI: fix up pretty-names removal patch\n\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "982245f01734e9d5a3ab98b2b2e9761ae7719094", "tree": "96ff56ff327f9a50f91a46886967f349d9a0a5e7", "parents": [ "74d863ee8a9da2b0f31e0f977daf127807b2e9d2" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Sun Jul 17 04:22:20 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:23 2005 -0700" }, "message": "[PATCH] PCI: remove CONFIG_PCI_NAMES\n\nThis patch removes CONFIG_PCI_NAMES.\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "74d863ee8a9da2b0f31e0f977daf127807b2e9d2", "tree": "df919b98bb9621dc01773ebf5238b35619bd0b4f", "parents": [ "d42c69972b853fd33a26c8c7405624be41a22136" ], "author": { "name": "akpm@osdl.org", "email": "akpm@osdl.org", "time": "Mon Jul 25 23:28:14 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:23 2005 -0700" }, "message": "[PATCH] PCI: Move PCI fixup data into r/o section\n\nMake PCI fixup data const, so it\u0027ll end up in a r/o section.\n\nThis also fixes the conversion into ECOFF which gets broken by too many\nchanges between r/w and r/o sections. Call it a hack but it\u0027s a change\nthat\u0027s correct by itself.\n\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d42c69972b853fd33a26c8c7405624be41a22136", "tree": "2ac805f0da1279492939f8627103f5f9a040034c", "parents": [ "56d8456b06ad1316bff3c75caed5e06e786f20d8" ], "author": { "name": "Andi Kleen", "email": "ak@suse.de", "time": "Wed Jul 06 19:56:03 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:23 2005 -0700" }, "message": "[PATCH] PCI: Run PCI driver initialization on local node\n\nRun PCI driver initialization on local node\n\nInstead of adding messy kmalloc_node()s everywhere run the\nPCI driver probe on the node local to the device.\n\nThis would not have helped for IDE, but should for\nother more clean drivers that do more initialization in probe().\nIt won\u0027t help for drivers that do most of the work\non first open (like many network drivers)\n\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "56d8456b06ad1316bff3c75caed5e06e786f20d8", "tree": "f7a17c2e66c548b5172bebd07a01437ff78a9447", "parents": [ "940903c5a5a906c622a79b3101586deb1a1b3480" ], "author": { "name": "John Rose", "email": "johnrose@austin.ibm.com", "time": "Mon Jul 25 10:17:03 2005 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:23 2005 -0700" }, "message": "[PATCH] PCI Hotplug: rpaphp: Purify hotplug\n\nCurrently rpaphp registers the following bus types as hotplug slots:\n1) Actual PCI Hotplug slots\n2) Embedded/Internal PCI slots\n3) PCI Host Bridges\n\nThe second and third bus types are not actually direct parents of\nremovable adapters. As such, the rpaphp has special case code to fake\nresults for attributes like power, adapter status, etc. This patch\nremoves types 2 and 3 from the rpaphp module.\n\nThis patch also changes the DLPAR module so that slots can be\nDLPAR-added/removed without having been designated as hotplug-capable.\n\nSigned-off-by: John Rose \u003cjohnrose@austin.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "940903c5a5a906c622a79b3101586deb1a1b3480", "tree": "9bdeaf31e715e6f59f4202e7e8552df6bc794d94", "parents": [ "0945cd5f908a09ad99bf42d7ded16f26f24f317d" ], "author": { "name": "John Rose", "email": "johnrose@austin.ibm.com", "time": "Mon Jul 25 10:16:58 2005 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:23 2005 -0700" }, "message": "[PATCH] PCI Hotplug: rpaphp: Export slot enable\n\nThis patch exports rpaphp_config_pci_adapter() for use by the rpadlpar\nmodule. It also changes this function by removing any dependencies on\nstruct slot. The patch also changes the RPA DLPAR-add path to enable\nnewly-added slots in a separate step from that which registers them as\nhotplug slots.\n\nSigned-off-by: John Rose \u003cjohnrose@austin.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "0945cd5f908a09ad99bf42d7ded16f26f24f317d", "tree": "83ca671af8a9e2560d8bed3c63fbffa59d96af58", "parents": [ "9c209c919df95f83aa042b3352c43841ad15a02b" ], "author": { "name": "John Rose", "email": "johnrose@austin.ibm.com", "time": "Mon Jul 25 10:16:53 2005 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:23 2005 -0700" }, "message": "[PATCH] PCI Hotplug: rpaphp: Remove rpaphp_find_pci\n\nThe rpaphp module currently uses a fragile method to find a pci device\nby its device node. This function is unnecessary, so this patch scraps\nit.\n\nSigned-off-by: John Rose \u003cjohnrose@austin.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "9c209c919df95f83aa042b3352c43841ad15a02b", "tree": "9be41a91d2da30893cc4e5b88fa02ea36f756598", "parents": [ "5eeb8c63a38ff20285f3bbe7bcfe5e7c33c8ba14" ], "author": { "name": "John Rose", "email": "johnrose@austin.ibm.com", "time": "Mon Jul 25 11:13:38 2005 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:22 2005 -0700" }, "message": "[PATCH] PCI Hotplug: rpaphp: Change slot pci reference\n\nThe slot structure in the rpaphp module currently references the PCI\ncontents of the slot using the PCI device of the parent bridge. This\nis unnecessary, since the module is actually interested in the\nsubordinate bus of the bridge. The dependency on a PCI bridge device\nalso prohibits the module from registering hotplug slots that have a\nroot bridge as a parent, since root bridges on PPC64 don\u0027t have PCI\ndevices.\n\nThis patch changes struct slot to reference the PCI subsystem using a\npci_bus rather than a pci_dev.\n\nSigned-off-by: John Rose \u003cjohnrose@austin.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "5eeb8c63a38ff20285f3bbe7bcfe5e7c33c8ba14", "tree": "81827bae5ac66dd8ca51cfe60740a64ca53e0759", "parents": [ "bde168412440084e649e7e04938bd1ab6e7bf978" ], "author": { "name": "John Rose", "email": "johnrose@austin.ibm.com", "time": "Mon Jul 25 10:16:42 2005 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:22 2005 -0700" }, "message": "[PATCH] PCI Hotplug: rpaphp: Move VIO registration\n\nCurrently, rpaphp registers Virtual I/O slots as hotplug slots. The\nonly purpose of this registration is to ensure that the VIO subsystem\nis notified of new VIO buses during DLPAR adds. Similarly, rpaphp\nnotifies the VIO subsystem when a VIO bus is DLPAR-removed. The rpaphp\nmodule has special case code to fake results for attributes like power,\nadapter status, etc.\n\nThe VIO register/unregister functions could just as easily be made from\nthe DLPAR module. This patch moves the VIO registration calls to the\nDLPAR module, and removes the VIO fluff from rpaphp altogether.\n\nSigned-off-by: John Rose \u003cjohnrose@austin.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "bde168412440084e649e7e04938bd1ab6e7bf978", "tree": "8d835e6dd4147db7568e070fa4cdf3e2785e3ce5", "parents": [ "1b11d78cf87a7014f96e5b7fa2e1233cc8081a00" ], "author": { "name": "John Rose", "email": "johnrose@austin.ibm.com", "time": "Mon Jul 25 10:16:37 2005 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Sep 08 14:57:22 2005 -0700" }, "message": "[PATCH] PCI Hotplug: rpaphp: Remove unused stuff\n\nSubject line says it all :)\n\nSigned-off-by: John Rose \u003cjohnrose@austin.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" } ], "next": "c26971cbb39727b0b692c6236f890ba13046a663" }