)]}' { "log": [ { "commit": "1e99fcb8cd53eddbce2fc72f9f8aefbb7a0beb41", "tree": "efe7bc2d41b27ab5b52bd61763f0ae8b94574fa6", "parents": [ "f89c546377a6357a6a5debc97f6a6e6f268d0f97" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Aug 26 16:58:56 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:10 2011 -0700" }, "message": "msm: kgsl: fix gpu_busy variable\n\nFix for pwrscale policies without both a busy \u0026 idle func.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "f89c546377a6357a6a5debc97f6a6e6f268d0f97", "tree": "90bd15b1392f6144aae718794e30533d3b9ddea0", "parents": [ "a8e5ecbc8f3cbccb7f9b1eb0a475b10038b7263f" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Tue Aug 23 18:46:03 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:10 2011 -0700" }, "message": "diag: Avoid memory leak\n\nDIAG allocates memory to read from SMD channel. if for some reason,\nthe read function is to be exited, the allocated memory should be\nreleased.\n\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "a8e5ecbc8f3cbccb7f9b1eb0a475b10038b7263f", "tree": "104fe57ad45ac072090830d805e896302e6fb6d5", "parents": [ "e549b76fb8d7aa3c17a7a6770916f9aefb97ccef" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Aug 25 19:19:58 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:09 2011 -0700" }, "message": "mmc: msm_sdcc: add support for CMD23\n\nThis patch adds following support in driver:\n1. Send CMD23 if requested by MMC core layer for multiblock\n read/write commands.\n2. If multi block read/write fails (which was preceded by CMD23)\n then send stop command (CMD12).\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "e549b76fb8d7aa3c17a7a6770916f9aefb97ccef", "tree": "340da4cd99e21ac421033ee010dbd566c787210d", "parents": [ "1bc306ad8db1bd0b5cc55361d905cbc04d75ef62" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Fri Sep 02 12:16:09 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:09 2011 -0700" }, "message": "msm: sdio_cmux: Abort TX when sdio_write failed with -ENODEV\n\nWhen sdio_write fails with a return value of -ENODEV, it has got\ninto an unrecoverable error state. So abort the transmission and\nhence avoid flooding the kernel logs with error messages.\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "1bc306ad8db1bd0b5cc55361d905cbc04d75ef62", "tree": "758c95addd8bc445e4556e42a3edaaf519f59b4d", "parents": [ "cb3950ad2a8448a0b4bc3d88d9cd85cdb3d44c97" ], "author": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Thu Aug 18 11:50:20 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:08 2011 -0700" }, "message": "vidc: vdec: Update firmware memory size.\n\nFirmware releases dated 07/30/11 and later require\n800KB of firmware global context space.\n\nSigned-off-by: Ashray Kulkarni \u003cashrayk@codeaurora.org\u003e\n" }, { "commit": "cb3950ad2a8448a0b4bc3d88d9cd85cdb3d44c97", "tree": "6bf646180d14d1e1b332f90274a3fd474893ada3", "parents": [ "d86d683996952adb9d3d396724c5aa48dbd75be6" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Thu Aug 18 13:07:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:07 2011 -0700" }, "message": "ASoC: WCD9310: Add debugfs support for headset adapter cables\n\nSome headset adapter cables have low impedance on the\nmicrophone line, which causes them to be detected as\nheadphones without microphones. However, sometimes these\ncables need to be used for recording and therefore must be\ndetected as headsets with microphones.\n\nThese adapter cables do not have buttons, so button press\nevents must be disabled to make sure these cables don\u0027t\ngenerate fake button press interrupts.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "d86d683996952adb9d3d396724c5aa48dbd75be6", "tree": "71177bacce89e8c2189317a9390bda85fa6db41b", "parents": [ "c4b3a4dff1831bfce165569e872e3ffcec5fa57f" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 17 14:06:55 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:07 2011 -0700" }, "message": "msm: sps: Rename PMEM clocks to match the new naming convention\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "c4b3a4dff1831bfce165569e872e3ffcec5fa57f", "tree": "235433bdb761f123f55f4d4d75c5941262a93fdf", "parents": [ "c12052934145b34a5bbf81c1dcd4c25362562b8d" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 17 16:58:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:06 2011 -0700" }, "message": "crypto: Register device with clock driver and rename clocks\n\nRename the clocks per the new naming convention under which\nsimilarly named clocks are distinguished between using their\nassociated device\u0027s name and ID.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "c12052934145b34a5bbf81c1dcd4c25362562b8d", "tree": "32665a8f197a76f9d05a43161c1a6fb2b4622b55", "parents": [ "842bc5e17489683ecf6b07a726d9616fde884d3f" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Aug 11 17:19:31 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:06 2011 -0700" }, "message": "msm: clock: Use device names to distinguish between PRNG clocks\n\nDrivers should now use their device names to distinguish between\nclocks of the same type rather than the clock name. This allows\nthe clock names to be updated to match the new naming convention.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "842bc5e17489683ecf6b07a726d9616fde884d3f", "tree": "f87639d3581ef128f7bb865488f87d6e26733e87", "parents": [ "c3eb6ef19e8902965a4aaab2d12f6260828117a8" ], "author": { "name": "Brian Gix", "email": "bgix@codeaurora.org", "time": "Wed Sep 07 08:13:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:05 2011 -0700" }, "message": "Bluetooth: Fix size of data for LTK Randomizer\n\nSigned-off-by: Brian Gix \u003cbgix@codeaurora.org\u003e\n" }, { "commit": "c3eb6ef19e8902965a4aaab2d12f6260828117a8", "tree": "b691da3dca962b4c590ac95c74fbf78cf4f73c76", "parents": [ "074ee02cd301d9831de59b55d34e2ab5625cc983" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Wed Jul 13 17:55:56 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:05 2011 -0700" }, "message": "mmc: sd: UHS-I bus speed should be set last in UHS initialization\n\nmmc_sd_init_uhs_card function sets the driver type, current limit\nand bus speed mode on card as well as on host controller side.\n\nCurrently bus speed mode is set by sending CMD6 to card and\nimmediately setting the timing mode in host controller. But\nthen before initiating tuning sequence, it also tries to set\ncurrent limit by sending CMD6 to card which results in data\ntimeout errors in controller if bus speed mode is SDR50/SDR104 mode.\n\nSo basically bus speed mode should be set only after current limit\nis set in the card and immediately after setting the bus speed mode,\ntuning sequence should be initiated.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "074ee02cd301d9831de59b55d34e2ab5625cc983", "tree": "e8323531dcf2884740622308205210618f1d9719", "parents": [ "8b636956ba3ef2308f1fb388a25bd6fb9995f2c0" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Fri Sep 02 12:06:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:04 2011 -0700" }, "message": "msm-fb: display: mdp clock scaling clean up\n\nclean up of clock scaling code to organize it better\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "8b636956ba3ef2308f1fb388a25bd6fb9995f2c0", "tree": "6e052855ef55ea6fc37ddd15982c492bc950d1ae", "parents": [ "6001a71683eb8970f6fd2ec1d4b69d5504068829" ], "author": { "name": "Ranjhith Kalisamy", "email": "ranjhith@codeaurora.org", "time": "Sat Sep 03 14:48:31 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:03 2011 -0700" }, "message": "msm: kgsl: Add proper device lock/unlock for early suspend driver\n\nSigned-off-by: Ranjhith Kalisamy \u003cranjhith@codeaurora.org\u003e\n" }, { "commit": "6001a71683eb8970f6fd2ec1d4b69d5504068829", "tree": "bc11b63351bc3a3b7e42bfae1339e8f93ec88152", "parents": [ "b5b0774b36169782ae5c01422bf0c9a3a9ca6210" ], "author": { "name": "Prabhakaran Mc", "email": "prabhakaranmc@codeaurora.org", "time": "Tue Sep 06 11:56:25 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:03 2011 -0700" }, "message": "Bluetooth: SAP Authentication changes\n\nSAP profile requires 16 pin length authentication for BT 1.2/2.0\ndevices as per specification. These changes were present for hciops\npluging, the current changes are for Management operations plugin.\n\nSigned-off-by: Prabhakaran Mc \u003cprabhakaranmc@codeaurora.org\u003e\n" }, { "commit": "b5b0774b36169782ae5c01422bf0c9a3a9ca6210", "tree": "9c102ac503225ad1ae61d295301c7c9b143402e5", "parents": [ "84e511925f4041755461f4f107d68069514299ba" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Mon Aug 29 17:48:07 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:02 2011 -0700" }, "message": "mmc: msm_sdcc: call sps_disconnect/sps_connect APIs from non-atomic context\n\nIf SDCC driver encounters any errors during the data transfer, it resets\nSDCC controller core and along with that it also resets the BAM pipes.\nIn order to reset BAM pipes, SDCC driver needs to call sps_disconnect()\nfollowed by sps_connect() APIs of SPS driver. But these APIs can\nonly be called from non-atomic context.\n\nCurrently SDCC driver error handling function is always triggered from\natomic context which means driver can\u0027t call BAM pipes reset APIs from\nthis error handling function. So this change defers the BAM pipe reset\noperation in thread context when next SDCC request is issued to driver.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "84e511925f4041755461f4f107d68069514299ba", "tree": "785f56ded8b2276dfc73ed97885f0b70332410c1", "parents": [ "07d19c35fd414757f4535f721522ed6379286b47" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Sat Sep 03 08:05:25 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:02 2011 -0700" }, "message": "input: cyttsp-i2c: Fix the EARLYSUSPEND and PM defines\n\nThis change prevents the resume handler being called in the\nregular resume callback. It should get called only during late\nresume. This can cause the device to wake up earlier than expected.\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "07d19c35fd414757f4535f721522ed6379286b47", "tree": "79a3b08614af096b70b4cfd7d3eadf394eaf1eb4", "parents": [ "668d6d5e3e38f9aa55e78333fb8d200a83f32be8" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Sep 01 11:22:35 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:01 2011 -0700" }, "message": "msm_fb: display: Synchronize DSI CMD Mode MDP \u0026 DMA cmd triggers\n\nSynchronize DSI CMD Mode MDP \u0026 DMA cmd triggers by handling DSI\nIRQ enable/disable properly\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "668d6d5e3e38f9aa55e78333fb8d200a83f32be8", "tree": "c787b9f18b969f364e69d8fb12346effd60722f7", "parents": [ "ec57f06be0c42ca13a24ec71fb9df92349bcbcb6" ], "author": { "name": "Manoj Rao", "email": "manojraj@codeaurora.org", "time": "Tue Aug 16 19:12:31 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:00 2011 -0700" }, "message": "msm:display:hdmi: Fix for EDID read/parse block[1]\n\nHDCP enabled DVI monitors with block 0 and block 1 EDID always\nswitched to 640x480 even though they supported higher resolutions.\nThis patch reads DTD data from the correct offset from block[1]\nand reads correct bits for interlaced format recognition.\n\nCRs-Fixed: 290391\nSigned-off-by: Manoj Rao \u003cmanojraj@codeaurora.org\u003e\n" }, { "commit": "ec57f06be0c42ca13a24ec71fb9df92349bcbcb6", "tree": "685b22dbf3938bbf23e02ad5d97ec8de52c5f198", "parents": [ "6d9ebeef798d736676e423e91e2f327a061251e2" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Aug 16 23:54:46 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:00 2011 -0700" }, "message": "msm: acpuclock: Move SoC-specific data into acpuclock drivers\n\nAs part of this, hard-code any configuration values that will\nnot change from board-to-board inside each driver instead of\npassing them through the acpuclk_soc_data struct.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/acpuclock-8x50.c\n" }, { "commit": "6d9ebeef798d736676e423e91e2f327a061251e2", "tree": "11e91cef9c5ff7c544db76f52f5423dc5cc8c316", "parents": [ "7a651aa9d571985b39687169df949fe955e16d6d" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Aug 26 12:15:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:59 2011 -0700" }, "message": "msm: acpuclock: Implement acpuclock APIs through function pointers\n\nCreate a generic wrapper acpuclock driver in acpuclock.c to call\nSoC-specific function pointer API implementations. With the\nexception of iomap conflicts, this should allow multiple acpuclock\ndriver implementations to be compiled into the same kernel binary.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/acpuclock-7201.c\n\tarch/arm/mach-msm/board-msm8960.c\n" }, { "commit": "7a651aa9d571985b39687169df949fe955e16d6d", "tree": "861682dc05e94b0ecd41c9c623db352622b6cc5f", "parents": [ "8de2f384410d09d1df1eef6e82fc4670767b91e7" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Wed Aug 03 20:44:58 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:59 2011 -0700" }, "message": "msm: msm_sdcc: use AUTO_PROG_DONE bit for CMD53 write\n\nSDCCv4 supports AUTO_PROG_DONE bit for CMD53 write.\nWithout this bit, driver had to send the dummy CMD52\nto know whether card is busy programming or not.\n\nAs AUTO_PROG_DONE bit is available, driver no longer\nsends dummy CMD52 rather it sets this AUTO_PROG_DONE\nbit in MCI_DATA_CTL register and then waits for\nPROG_DONE interrupt status bit to be set.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "8de2f384410d09d1df1eef6e82fc4670767b91e7", "tree": "61f25bfaeb31ee5c0b444432948e3410cfa50271", "parents": [ "719c676f024c8abedecaf2b193023bc3c1e2859d" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Aug 25 11:04:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:58 2011 -0700" }, "message": "mfd: pm8xxx-pwm: use small functions to replace bigger ones\n\nAdd small functions to replace bigger ones for better readability\nand error checking.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "719c676f024c8abedecaf2b193023bc3c1e2859d", "tree": "95207aee5f93606d360030e6e95c0cf9eb1b4458", "parents": [ "f12acf5c86e131c638f1ec6eb09294ad82f82df1" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Aug 25 11:03:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:57 2011 -0700" }, "message": "mfd: pm8xxx-pwm: split pm8xxx_pwm_config to smaller structs\n\nA big struct of pm8xxx_pwm_config is not easy to manage. Split it\nto smaller structs and make the period struct public.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "f12acf5c86e131c638f1ec6eb09294ad82f82df1", "tree": "03ddbec4e422a6d6860483055c386255928907aa", "parents": [ "e6e96912400f231f4f62bf40960761206dca9ed0" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Tue Sep 06 10:49:43 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:57 2011 -0700" }, "message": "Revert \"msm_fb: display: correct both mdp and dsi register address sapce\"\n\nThis reverts commit 6b41a2b07e43c4ca0946458e9b66bde78f813dd7.\n\nSigned-off-by: kuogee hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "e6e96912400f231f4f62bf40960761206dca9ed0", "tree": "a1c84c2f7c0afbaf73357ff6155f5776c783b0c0", "parents": [ "b0021cd06f29441c12af4f5529316bc4fa01f158" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Aug 31 18:01:11 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:56 2011 -0700" }, "message": "8060: wlan: Enable wlan on dragonboard\n\nDifferent values for pin_controlled and GPIO deep sleep need for\ndragonboard\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "b0021cd06f29441c12af4f5529316bc4fa01f158", "tree": "aad65b654bc3310c0702a2184de032e370712642", "parents": [ "b10be1d243fde1ba94e69ac47bc726385013b3f1" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Wed Aug 31 15:20:12 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:56 2011 -0700" }, "message": "msm: audio: qdsp6v2: Enable soft volume command to avoid noise\n\nAdd support for soft volume command and enable it to avoid\nnoise during volume change sequence\n\nCRs-fixed: 304164\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "b10be1d243fde1ba94e69ac47bc726385013b3f1", "tree": "c0ea2ee0f50b15e84e85a346213fd5168805e9e8", "parents": [ "3be3b2611624ebcc8f7758e115a13631a888093c" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Sep 02 10:29:31 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:55 2011 -0700" }, "message": "msm: board-8960: Add external 3.3 V regulator for 8960 LiQUID\n\nAdd a GPIO controlled regulator device to manage the external\n3.3 V buck-boost regulator on 8960 LiQUID via PMIC PM8018\nGPIO 17. This regulator is shared between several consumers.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "3be3b2611624ebcc8f7758e115a13631a888093c", "tree": "004b7c4236df546af8575d11137b4b07ab2832d5", "parents": [ "3fcdb3301fc08eabfe82d75bcbb2d8545de7fdbf" ], "author": { "name": "Anantha Krishnan", "email": "ananthk@codeaurora.org", "time": "Mon Sep 05 17:22:48 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:55 2011 -0700" }, "message": "radio-tavarua: Added changes to return the RMSSI Delta value\n\nThis change involves returning the currently set RMSSI Delta value.\n\nCRs-Fixed: 304534\nSigned-off-by: Anantha Krishnan \u003cananthk@codeaurora.org\u003e\n" }, { "commit": "3fcdb3301fc08eabfe82d75bcbb2d8545de7fdbf", "tree": "9b828dfb4c80fed7da1f348383b57cf3f431ca94", "parents": [ "3246739c232742f67e8bab8b2ddbf6a30580ef8d" ], "author": { "name": "Ranjhith Kalisamy", "email": "ranjhith@codeaurora.org", "time": "Fri Sep 02 20:01:06 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:54 2011 -0700" }, "message": "msm: kgsl: Prevent writes to ringbuffer WPTR from being dropped\n\nSometimes, the writes to ringbuffer WPTR register are dropped. This will\nmake the GPU to go to idle before completing all the commands that it is\nsubmitted with. This workaround prevents the writes from being dropped.\n\nCRs-Fixed: 302173\nSigned-off-by: Ranjhith Kalisamy \u003cranjhith@codeaurora.org\u003e\n" }, { "commit": "3246739c232742f67e8bab8b2ddbf6a30580ef8d", "tree": "71abca02aabd4ec8341417626272b6b021acdb77", "parents": [ "86fa95cfcad8a0485f5d7a86e7b88bafd168cf20" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 18 16:51:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:53 2011 -0700" }, "message": "mfd: pm8xxx-irq: set mask on suspend flag\n\nThe pm8xxx irq controller doesn\u0027t have wakeup source configuration bits.\nIt relies on managing wakeup interrupts in software. The generic irq code\nsupports managing wakeup interrupts if the irq_chip is defined with\nIRQCHP_MASK_ON_SUSPEND.\n\nUpdate the pm8xxx irq controller to use IRQCHIP_MASK_ON_SUSPEND.\n\nFor a chip that implements IRQCHP_MASK_ON_SUSPEND a mask callback\nis a must. This callback will be called when the system goes to\nsuspend on all non-wakeup interrupts.\n\nCRs-Fixed: 303137\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "86fa95cfcad8a0485f5d7a86e7b88bafd168cf20", "tree": "0c9528bfeb6d47c8e8ad0f4f5ce043ef28bd54d4", "parents": [ "db0a4b099e03ef0d4fc3027bfbf71ba97a479cca" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Mon Aug 29 15:31:38 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:53 2011 -0700" }, "message": "msm: pm: Remove unused latency and residency values\n\nTargets that use cpuidle use power calculations to determine the\nsleep mode that the cpu can enter. Older targets without cpuidle\nwill still continue to use residency and latency to determine the\nsleep mode to enter.\n\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "db0a4b099e03ef0d4fc3027bfbf71ba97a479cca", "tree": "1f7c61e09f19f63713f160aab9761d02d38af851", "parents": [ "3a30bdae40a7b5f72d159ec03f7ec59a3aeb3b61" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Tue Aug 23 09:32:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:52 2011 -0700" }, "message": "ASoC: WCD9310: Add separate widgets for each spk amplifier\n\nAdd separate widgets for two external speakers amplifiers,\nso that each speaker amplifier is turned off when the DAPM path for\nthat speaker in codec is powered off. This is needed to avoid pops\ncaused by having one combined external speaker widget turned off\nafter one of the codec DAPM paths is turned off.\n\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "3a30bdae40a7b5f72d159ec03f7ec59a3aeb3b61", "tree": "905f9fc752b63136a2514863b4c1745da14c7c57", "parents": [ "1f6fd72fc2062d128fe46c98537aa1a78eba2772" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Mon Aug 15 10:36:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:52 2011 -0700" }, "message": "ASoC: msm8960: Use DAPM_PRE and POST for MCLK\n\nFor proper codec turn on, MCLK should be enabled before any of the\ncodec blocks are enabled. To avoid click and pops, MCLK should be\ndisabled after all the codec blocks are disabled.\n\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "1f6fd72fc2062d128fe46c98537aa1a78eba2772", "tree": "516b49fd6418337ea33ba8d0b6b25142ce7ccec5", "parents": [ "95ae357a3490af9764322c2cd2679edc099337fd" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Thu Aug 11 10:36:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:51 2011 -0700" }, "message": "ASoC: WCD9310: Update codec register reset values\n\nAfter tape out of wcd9310 1.0, some of the codec register reset values\nare updated by the HW team. These changes are going to be reflected in\nwcd9310 1.1 and wcd9310 2.0.\n\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "95ae357a3490af9764322c2cd2679edc099337fd", "tree": "34cd10e1e84ecc8432c54d37c3c58021584253b7", "parents": [ "bd5297fc4302caa64a2168afac71963b2f06b089" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Tue Mar 15 14:58:12 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:51 2011 -0700" }, "message": "msm: qdsp5: Add AAC encoding support on 7x27a\n\nAdd Tunnel and Non Tunnel mode AAC encoding support\non 7x27a target.\n\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "bd5297fc4302caa64a2168afac71963b2f06b089", "tree": "eabfd7406165275039561fa7596a1e4c20cd6388", "parents": [ "b84120b47e318d5144604e7249e0e0bc119e1301" ], "author": { "name": "Ranjhith Kalisamy", "email": "ranjhith@codeaurora.org", "time": "Thu Aug 25 15:07:26 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:50 2011 -0700" }, "message": "msm: kgsl: Fix bug in postmortem dump register decode\n\nSigned-off-by: Ranjhith Kalisamy \u003cranjhith@codeaurora.org\u003e\n" }, { "commit": "b84120b47e318d5144604e7249e0e0bc119e1301", "tree": "a491c79a185f9512601072cdbd4b43ea67342830", "parents": [ "b07e1ae25764e415a9d7fea689889c641136eab2" ], "author": { "name": "Amir Samuelov", "email": "amirs@codeaurora.org", "time": "Sat Sep 03 17:49:43 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:49 2011 -0700" }, "message": "msm_fb: display: Add Chimei MIPI-DSI WXGA panel driver.\n\nAdd Chimei MIPI-DSI WXGA (1366x768) panel driver.\n\nSigned-off-by: Amir Samuelov \u003camirs@codeaurora.org\u003e\n" }, { "commit": "b07e1ae25764e415a9d7fea689889c641136eab2", "tree": "00e58b5214b8eae6620e67811813d16421c300ca", "parents": [ "57f90c16858a07d63308cd6a289ced153482668d" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Fri Sep 02 11:58:42 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:49 2011 -0700" }, "message": "mmc: 8064: Disable runtime PM for SDCC on Simulator\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "57f90c16858a07d63308cd6a289ced153482668d", "tree": "e82262db80792a2fbfa8d211656d5dae23da945f", "parents": [ "b3a33b76db65f64dab0c97b1b09879b91ac9e755" ], "author": { "name": "Sidipotu Ashok", "email": "sashok@codeaurora.org", "time": "Fri Aug 19 09:34:38 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:48 2011 -0700" }, "message": "msm: 7x27a: audio: Driver to use modem side MVS APIs.\n\nDriver to exploit Multimode Vocoder Service(MVS) APIs\nprovided by modem.\n\nSigned-off-by: Sidipotu Ashok \u003csashok@codeaurora.org\u003e\n" }, { "commit": "b3a33b76db65f64dab0c97b1b09879b91ac9e755", "tree": "2bee6435d670ba640926ec03e65c050b86f3af7e", "parents": [ "f4f0f069b9b722f0caef073528633d8a34b6ab46" ], "author": { "name": "Justin Paupore", "email": "jpaupore@codeaurora.org", "time": "Tue Aug 23 15:30:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:48 2011 -0700" }, "message": "msm: Add regulators for 7x27a/PM8029\n\nAdd regulator API support for PM8029 regulators on 7x27a.\n\nSigned-off-by: Justin Paupore \u003cjpaupore@codeaurora.org\u003e\n" }, { "commit": "f4f0f069b9b722f0caef073528633d8a34b6ab46", "tree": "3843771a1e9283a43e4f6a1d18e70d5f7a561888", "parents": [ "ad31c98ed4831693f98e4690520b99f05bd55557" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Mon Aug 29 00:49:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:47 2011 -0700" }, "message": "msm: pmapp: Add vreg_lpm_pincntrl_vote API\n\nAdd voltage regulator pin control LPM API.\n\nCRs-Fixed: 303753\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "ad31c98ed4831693f98e4690520b99f05bd55557", "tree": "f3811a72c4ff7ee7f06f6ab2528786a7009e5388", "parents": [ "2a473b2e26a1140f58619f91d072b5451d3e071d" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Mon Aug 15 23:24:17 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:47 2011 -0700" }, "message": "msm: 8960: adjust mdp perf clock table entries\n\nadds the mdp clock entries based on the current clock scale\nlogic\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "2a473b2e26a1140f58619f91d072b5451d3e071d", "tree": "a3b50d1fbb0994522f4210fbf4cb0f598abda7b3", "parents": [ "01c8631d32fa5c7b3d1aff909fcb6a2cfc59fde4" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Tue Aug 16 15:35:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:46 2011 -0700" }, "message": "msm: timer: Add ifdefs for MSM9615\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "01c8631d32fa5c7b3d1aff909fcb6a2cfc59fde4", "tree": "3c2d9847ce4124046e0c63bb487f34684ee869ad", "parents": [ "99fb6f2ce69cb8739eef9b15baa818a4c93d59d6" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Tue Aug 16 15:25:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:45 2011 -0700" }, "message": "msm: irq: Add irqs file for MSM9615\n\nAdd support for MSM9615 irqs\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "99fb6f2ce69cb8739eef9b15baa818a4c93d59d6", "tree": "6f035c741d889c7b97287221f3d94da2d70f91cc", "parents": [ "fb48637fb75c2ffddafa07231926843d50b7d1fc" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Mon Aug 15 13:37:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:45 2011 -0700" }, "message": "msm: iomap: Add iomap for MSM9615\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "fb48637fb75c2ffddafa07231926843d50b7d1fc", "tree": "4fef14f193b73da2c90456f81563859d43790b65", "parents": [ "21ef2feb1cddfa15f0a88c0838e3c941a84e9c7e" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Fri Sep 02 19:01:49 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:44 2011 -0700" }, "message": "mmc: msm_sdcc: Fix issue with runtime PM resume\n\nDue to the changes introduced in recent commit 68338b, runtime PM\nresume is getting called twice while doing platform resume as below -\n\nmsmsdcc_pm_resume()-\u003emsmsdcc_runtime_resume()-\u003emmc_resume_host()\n-\u003emmc_claim_host()-\u003emsmsdcc_enable()-\u003emsmsdcc_runtime_resume\n\nThis patch fixes this issue by checking the runtime PM state of\nthe device before resuming.\n\nCRs-Fixed: 303742\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "21ef2feb1cddfa15f0a88c0838e3c941a84e9c7e", "tree": "26d04717dac2faeb5d964fad1bbcf2ff07b92812", "parents": [ "521b267ef88f61cc17957d20eb2e075a4dab53ae" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Thu Aug 18 17:12:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:44 2011 -0700" }, "message": "msm_fb: display: use blt mode to implement MDP writeback\n\nMDP frame buffer mode was used to implement writeback for\npulling interface (lcdc and dsi video). However frame buffer\nmode is not recommanded by hardware engineer due to lacking\nof verification. This patch will replace frame buffer mode\nwith BLT mode to implement MDP writeback.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "521b267ef88f61cc17957d20eb2e075a4dab53ae", "tree": "a7cd4388312f6520182e640c0b4e478c7465b531", "parents": [ "073f1221221adb52039bc49f79c81e06335f9c7a" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Fri Sep 02 15:04:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:43 2011 -0700" }, "message": "msm_fb: display: correct both mdp and dsi register address sapce\n\nCurrently both mdp and dsi register address space are set in-correctly.\nIt causes some debugging registers can not be accessed.\nThis patch correct both mdp and dsi register address space.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "073f1221221adb52039bc49f79c81e06335f9c7a", "tree": "3f9bb42e601e2fa99cc1fc54201fd86e65b73d92", "parents": [ "baf6d343ccfaf895a7424ffe54f8cf7bd833797c" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Fri Sep 02 09:44:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:43 2011 -0700" }, "message": "msm_fb: display: Add panel vertical porches into TE logic\n\nPanel vertical porches are not considered into tear check logic\nwhich cause TE can not tolerate panel vsync frequency variation\nafter panel heating up. This cause mdp to hang up and no screen\nupdated after that. This patch will have panel vertical porches\nconsidered in during configure TE registers.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "baf6d343ccfaf895a7424ffe54f8cf7bd833797c", "tree": "b99d53efb8cc589bb0b040f53f82e1cedbcb5e33", "parents": [ "35bb9401304b9291baa61bc3bc068f9f7ee37e70" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Tue Aug 30 21:49:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:42 2011 -0700" }, "message": "msm: clock-local: Make freq_tbl pointer non-const\n\nThere is a need to change freq_tbl at runtime for targets using a\nsimilar clock driver, therefore make the freq_tbl not const to\nsupport such requirement.\n\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n" }, { "commit": "35bb9401304b9291baa61bc3bc068f9f7ee37e70", "tree": "277d5ceafb309625f985ff72f200258555cc10ad", "parents": [ "36448a4aa15f19270d76e50e68f9dfebcecd3e16" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Aug 30 20:03:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:41 2011 -0700" }, "message": "power: msm_charger: log if battery is low\n\nThere can be restarts requested from the userspace if the battery is low.\nIt would be nice to print the low battery capacity in the logs to ease\nthe debugging of such restarts.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "36448a4aa15f19270d76e50e68f9dfebcecd3e16", "tree": "1a37b11dc5d4dcbca8f0583c693a03045dcc4cdf", "parents": [ "96aecfc0335f7f05cdf12905b718b75d25678c02" ], "author": { "name": "Murali Palnati", "email": "palnatim@codeaurora.org", "time": "Fri Sep 02 15:06:18 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:41 2011 -0700" }, "message": "mmc: msm_sdcc: Extend the spin lock to cover all register reads\n\nIn PIO IRQ handler, currently the STATUS and MASK registers are\nread without the host lock being grabbed. Fix this by extending\nthe scope of the lock.\n\nCRs-Fixed: 304791\nSigned-off-by: Murali Palnati \u003cpalnatim@codeaurora.org\u003e\n" }, { "commit": "96aecfc0335f7f05cdf12905b718b75d25678c02", "tree": "dc9c6b21eb3112c45065d4008f91a571ce0a0e79", "parents": [ "3939c8d7246abd08935468c95ef69ec757738c4b" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Thu Jul 28 18:18:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:40 2011 -0700" }, "message": "subsystem-restart: Allow a limited number of restarts in a time interval\n\nSubsystems may crash often enough to render a device unusable or\neven unstable. To avoid such a situation, reboot the entire system\nif a predefined number of subsystem restart sequences occur in a\npredefined interval of time.\n\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "3939c8d7246abd08935468c95ef69ec757738c4b", "tree": "9765df37215f77c87a4ab131f46f143e18c590a6", "parents": [ "9e17253ba2893f1844dc2cb39dd8ed2f65bd285f" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Aug 29 17:36:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:40 2011 -0700" }, "message": "msm: clock-8960: Add support for measuring Q6 clocks\n\nSupport measurement of the Q6 FW, Q6 SW and Q6 LPASS clocks via\nthe q6fw_clk, q6sw_clk and q6_func_clk.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "9e17253ba2893f1844dc2cb39dd8ed2f65bd285f", "tree": "dbfb3b87eb7b7d28a4594108992f45a585e1cfb1", "parents": [ "894fd58ea83d1f1c38269590cfdff6551b872f9e" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 11:42:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:39 2011 -0700" }, "message": "defconfig: Add ion support for 8960 targets\n\nEnable ION for 8960 targets\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "894fd58ea83d1f1c38269590cfdff6551b872f9e", "tree": "58772e8d71cdb9692f24c494c62aec3d921557a9", "parents": [ "d6183793419fa8a88d3e91c2dfa321dc13bf0c6b" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 13:33:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:38 2011 -0700" }, "message": "gpu: ion: Add support for cached and uncached mappings\n\nAdd explicit support for cached and uncached mappings. Functions\nnow describe whether mappings will be cached or uncached.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "d6183793419fa8a88d3e91c2dfa321dc13bf0c6b", "tree": "54c13d60a77fe2a0f35e64a2446043aa2c4def2c", "parents": [ "90b244c3daf65ffe1bb0c5fb585bec79eea2ec4a" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 13:42:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:38 2011 -0700" }, "message": "msm: 8960: Add support for ion heaps\n\nSet up Ion heaps in the board file\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "90b244c3daf65ffe1bb0c5fb585bec79eea2ec4a", "tree": "a9755dce96af0f6d93822aaedd0233318b7f10d5", "parents": [ "09bbcb307dfc1ad299cbe52b2f0b59427ac470ab" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Thu Aug 11 21:38:23 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:37 2011 -0700" }, "message": "ASoC: msm8960: change period size for capture path\n\nFor record path there is data loss if period size is more than\n512 bytes as the encoder fails to encode the last data. Hence reduce\nperiod size to allow smaller buffer size.\n\nCRs-fixed: 297328\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "09bbcb307dfc1ad299cbe52b2f0b59427ac470ab", "tree": "a52581a48c949b643c4212d0f8cf854991ac0d86", "parents": [ "edcbdcced5e8cea0412e9ce251fb0129733d456f" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Tue Aug 30 02:13:26 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:37 2011 -0700" }, "message": "USB: gadget: Add 10 microsec delay before fetching setup_data\n\nUSB hardware sometimes generate interrupt before 8 bytes of\nSETUP packet are written to system memory.\nThis results in wrong setup_data when tried to read immediately\nafter receiving an interrupt.\nAdd a delay of 10 microsec before fetching setup packet to allow\nwrites from hardware to system memory to complete.\n\nCRs-Fixed: 291466\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "edcbdcced5e8cea0412e9ce251fb0129733d456f", "tree": "f35f401fc2814248c6285845441c9f4ccc8755a4", "parents": [ "250557bd4968c5f27a7f1140b72c4d0a86f78172" ], "author": { "name": "Ujwal Patel", "email": "ujwalp@codeaurora.org", "time": "Wed Aug 24 09:14:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:36 2011 -0700" }, "message": "msm: camera: Lens rolloff changes for MSM8960.\n\nMSM8960v1 has mesh based lens rolloff while MSM8960v2 has\nPCA based lens rolloff. Also starting from MSM8960v2 and\nnewer chipsets have double buffered lens rolloff. So adding\nthe run-time lens rolloff update, new config for PCA lens\nrolloff and run-time selection of Mesh or PCA lens rolloff.\n\nSigned-off-by: Ujwal Patel \u003cujwalp@codeaurora.org\u003e\n" }, { "commit": "250557bd4968c5f27a7f1140b72c4d0a86f78172", "tree": "038dd74119c92afbce5d41605a3467f9896a3cbc", "parents": [ "64d003eac3c0531c4d3b4fb9be100a736deee1ea" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Sep 01 12:26:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:36 2011 -0700" }, "message": "msm: 8064: Don\u0027t enable PMIC devices on Rumi\n\nThe PMIC devices are not wired up on the Rumi builds, which\nleads to interrupt storms. Disable these devices on the\nRumi.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-apq8064.c\n" }, { "commit": "64d003eac3c0531c4d3b4fb9be100a736deee1ea", "tree": "c96dc71e53edf6dd94cc521e57a4cb55e5f6313f", "parents": [ "613ab7a16ca58ecda9c5bd4b7ad67ff7a4fd34fd" ], "author": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Tue Aug 30 11:38:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:35 2011 -0700" }, "message": "msm: camera: Remove additional check in msm_queue_drain\n\nRemoved additional check in msm_queue_drain to make\nsure that the list is getting emptied in all cases.\n\nSigned-off-by: Sunid Wilson \u003csunidw@codeaurora.org\u003e\n" }, { "commit": "613ab7a16ca58ecda9c5bd4b7ad67ff7a4fd34fd", "tree": "718c01f5085f274c374b36ee4717c28c2d49d153", "parents": [ "76a1964091d898616f68fc58992462ed46c0becf" ], "author": { "name": "Nishant Pandit", "email": "npandit@codeaurora.org", "time": "Fri Sep 02 03:36:01 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:34 2011 -0700" }, "message": "msm: camera: Change mount angle of sensor\n\nChange mount angle of camera to 90 for Novatek 3D mipi panel\n\nSigned-off-by: Nishant Pandit \u003cnpandit@codeaurora.org\u003e\n" }, { "commit": "76a1964091d898616f68fc58992462ed46c0becf", "tree": "ed396a978f2aa4f407f692dc16ca53ec58b8056c", "parents": [ "a346e2c8bc00fef7cf1114dac067b95100134542" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Sep 01 10:27:03 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:34 2011 -0700" }, "message": "mfd: pmic8058: ack an handled interrupt immediately\n\nCurrently the pmic interrupt thread handles all the interrupts\nand later clears all those interrupts at once.\n\nA problem was observed with this approach. The adc interrupt handler\ncould start another conversion and if the conversion finishes before\nthe pmic interrupt thread clears them, it ends up clearing the new\ninterrupt too.\n\nFix it by clearing the interrupt as soon as the handler is called.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "a346e2c8bc00fef7cf1114dac067b95100134542", "tree": "6f2d949365485a1c1e55d90f72017aabb4af677a", "parents": [ "d267e5c3086e095fe3d21b6d9505bb0a18854227" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Aug 30 18:17:51 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:33 2011 -0700" }, "message": "mfd: pmic8058: avoid unmasking enabled irq\n\nIf an interrupt was already unmasked previously, don\u0027t unmask it\nunnecessarily. This will avoid loosing the interrupt if it were\npending.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "d267e5c3086e095fe3d21b6d9505bb0a18854227", "tree": "940727739fa19ec59eb1d86583618eb606cf581f", "parents": [ "5e91203dfd1bb3dda16c712a4accde6b2040e437" ], "author": { "name": "Jin Hong", "email": "jinh@codeaurora.org", "time": "Thu Aug 25 15:03:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:33 2011 -0700" }, "message": "defconfig: 8960: enable CONFIG_STRICT_MEMORY_RWX\n\nSigned-off-by: Jin Hong \u003cjinh@codeaurora.org\u003e\n" }, { "commit": "5e91203dfd1bb3dda16c712a4accde6b2040e437", "tree": "a4ab23d294c854a868ee480c57689e51aa2f1ad0", "parents": [ "ceea762f4b33c244059f674798527902b0e2168e" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Mon Aug 29 11:15:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:32 2011 -0700" }, "message": "msm_fb: display: wait for vsync and change perf level only if needed\n\nsince overlay_set can be called multiple times to change some\nparameters, there is no need to wait on vsync to change clock for each\ncall to overlay_set unless there is a change in performance level.\n\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "ceea762f4b33c244059f674798527902b0e2168e", "tree": "acb5211166981185619b1dffe86536f357dec5da", "parents": [ "a451049af4e2fccfacbaef82d2075cf683e319e7" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Tue Aug 23 14:01:03 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:31 2011 -0700" }, "message": "msm: camera: Support for Multi planar image formats.\n\nAdd support for multi-planar image formats. This\nallows the luma and chroma planes of the image to\nreside in different memory locations.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "a451049af4e2fccfacbaef82d2075cf683e319e7", "tree": "633f07ad7dccc2c520b97f05d041365e5bbdf6f0", "parents": [ "e1b13f89144c522effe128a6665984e7f26d7c2c" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Mon Aug 29 15:56:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:31 2011 -0700" }, "message": "wcnss: Properly determine when the module param was specified\n\nAcked-by: Jeff Johnson \u003cjjohnson@qca.qualcomm.com\u003e\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "e1b13f89144c522effe128a6665984e7f26d7c2c", "tree": "dff907338eaaf5319ea865ad277bf8a6b225c998", "parents": [ "10976ea87843d3c682b9caac4dc23c131cf46c21" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Tue Aug 30 09:35:49 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:30 2011 -0700" }, "message": "crypto: Fix memory leak\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "10976ea87843d3c682b9caac4dc23c131cf46c21", "tree": "83136b7552f6820aead2c6ca2ac3574341ecfc44", "parents": [ "75d9e5b6e97b0c74fa5f73fe3cfa8f745e7523c5" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Aug 25 11:01:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:30 2011 -0700" }, "message": "mfd: pm8xxx-pwm: fix debug code bugs\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "75d9e5b6e97b0c74fa5f73fe3cfa8f745e7523c5", "tree": "3acf3068cd61d10fd296c2d34634691cce666ae5", "parents": [ "04255ee147b89045f8a54e5fbec37095c74c2200" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Aug 25 10:59:17 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:29 2011 -0700" }, "message": "mfd: pm8xxx-pwm: select higher resolution if possible\n\nMore bits in PWM size means higher resolution, which is preferred\nif we have such choice without sacrificing accuracy.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "04255ee147b89045f8a54e5fbec37095c74c2200", "tree": "267288bd411d7e945a91b3d4cdc99dcd5e3a4195", "parents": [ "15b5b3ec2a58cef0bc576ab442f9cb472eb5841b" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Aug 11 19:45:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:29 2011 -0700" }, "message": "msm: iommu: Add functions to map/unmap an address range\n\nImplement the iommu_map_range / iommu_unmap_range ops in\nthe MSM IOMMU driver.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "15b5b3ec2a58cef0bc576ab442f9cb472eb5841b", "tree": "cb8580158a52df6bf3f262d85976a16337c1c1f3", "parents": [ "0b1345ebd586363a51c7a380fb3e7b3f6d81b445" ], "author": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Thu Aug 11 15:04:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:28 2011 -0700" }, "message": "vidc: venc: Remove check for allocation of sequence buffer size.\n\nFirmware requires non-zero sequence buffer size for H.263.\n\nSigned-off-by: Ashray Kulkarni \u003cashrayk@codeaurora.org\u003e\n" }, { "commit": "0b1345ebd586363a51c7a380fb3e7b3f6d81b445", "tree": "eb9658765242dfb0a58826febf00f88a0dc7fc33", "parents": [ "7a6a34fb26f959fcbad55c9450819d79015a6f2e" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Aug 11 19:32:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:27 2011 -0700" }, "message": "drivers: iommu: Add map/unmap range ops\n\nAdd IOMMU ops functions to allow mapping and unmapping\nwhole ranges of address space based on a scatterlist.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "7a6a34fb26f959fcbad55c9450819d79015a6f2e", "tree": "78d7bd2e16e2e3206462b105759a21bb925c41bb", "parents": [ "30bb6c435a3906b813919cf89ae932c9f3d9966d" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Thu May 19 13:27:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:27 2011 -0700" }, "message": "vidc: 1080p: Override SP profile to ASP for MPEG4 decoding.\n\nAlways set profile to ASP for MPEG4 decoding. Core will\nignore the profile information from the sequence header\nand continue to decode with profile set by driver.\n\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n" }, { "commit": "30bb6c435a3906b813919cf89ae932c9f3d9966d", "tree": "7b0f0d90d066fa961fa8e823e7557c589deb9eb2", "parents": [ "3d321a35703d041a11f25f7abc27cc6c1ef8cd13" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Aug 31 13:02:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:26 2011 -0700" }, "message": "Revert \"8060: wlan: Enable wlan on dragonboard\"\n\nThis reverts commit e0fb57d5ba0dbbb79e2193c4f7bba377bbf25154\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "3d321a35703d041a11f25f7abc27cc6c1ef8cd13", "tree": "8f50edefa4a485dd56b40d5631038f8816a84f4c", "parents": [ "20a9bf2d18b3170d7daca4e35be53726a00e13bd" ], "author": { "name": "Maya Spivak", "email": "mspivak@codeaurora.org", "time": "Fri Jul 08 11:26:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:26 2011 -0700" }, "message": "cpu-hotplug: Add the function \u0027cpu_hotplug_inprogress\u0027\n\nAllows a caller to detect whether a cpu hotplug operation\nis in progress. This is useful for optimizing code paths\nbased on this condition.\n\nSigned-off-by: Maya Spivak \u003cmspivak@codeaurora.org\u003e\n" }, { "commit": "20a9bf2d18b3170d7daca4e35be53726a00e13bd", "tree": "dbadefafaa7349f64fbde770ae2a8da5ebe3f743", "parents": [ "591ea0386000c4248a67bf1bea37d221edef959c" ], "author": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Tue Aug 23 16:02:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:25 2011 -0700" }, "message": "msm: camera: Fix recording state machine bug\n\nVideo frames are sent to the userspace even after stop_recording\nis issued. Fixed the recording state machine to correct this.\n\nSigned-off-by: Sunid Wilson \u003csunidw@codeaurora.org\u003e\n" }, { "commit": "591ea0386000c4248a67bf1bea37d221edef959c", "tree": "2956ad9a72a8eb5c46a58d0ddb09a62d2f687f8d", "parents": [ "9263c210a8ce8dd398ae2c865d1dad7e9d197e45" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Jul 21 16:08:37 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:25 2011 -0700" }, "message": "msm: kgsl: Add idle_stats based pwrscale policy\n\nAdd a pwrscale policy to transmit idle statistics\nto userspace via the MSM idle_stats_device core.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "9263c210a8ce8dd398ae2c865d1dad7e9d197e45", "tree": "ae0c2eb5421df36f7accf08201a1e011295d3ac9", "parents": [ "b4237789514ee9027462b57f1c64e7157b4b6b60" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Wed Aug 31 20:37:45 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:24 2011 -0700" }, "message": "msm: sdio: adding channel cleanup before every test\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "b4237789514ee9027462b57f1c64e7157b4b6b60", "tree": "d60de6b01b2e76d2548fd281c6f803ebb8d518f8", "parents": [ "da06a2c45fc883edabde8c92dec6801c7d2af54b" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Wed Aug 31 20:06:16 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:23 2011 -0700" }, "message": "msm: sdio: fix to close_chan_lpm_test\n\nminimize the logic of close_channel_lpm_test() to open channel and close\nchannel, and the rest of the logic is done in close_chan_lpm_test_write()\nto be consistent with the rest of the tests\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "da06a2c45fc883edabde8c92dec6801c7d2af54b", "tree": "1f6f870f04c0459e2562261d76d8cd8c85e45122", "parents": [ "de4cefb00960665e40b286e84e3d3735307488a2" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Aug 26 17:25:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:23 2011 -0700" }, "message": "defconfig: msm8960: Enable LED Triggers\n\nEnable LED TRIGGERS so can client drivers\nuse triggers to control leds.\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "de4cefb00960665e40b286e84e3d3735307488a2", "tree": "b252958886acd1e1ec5c3652bdbb7f95c0e98fd0", "parents": [ "9a901fd3057954d71bc96a51393727ca1df4b532" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Aug 04 18:10:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:22 2011 -0700" }, "message": "board: msm8960: Add low current LEDs\n\nAdd two low current LEDs with low power\nconfiguration and default trigger\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "9a901fd3057954d71bc96a51393727ca1df4b532", "tree": "d1b13cab90ce9ddf604e6b4c0c45e731163e2451", "parents": [ "9c0bc33d23ab05d7a2e68c0a304012effee70294" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Mon Aug 01 10:07:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:22 2011 -0700" }, "message": "ASoC: WCD9310: Add support for multiple sampling rates\n\nIt is unknown to the codec driver which path will be\nused for a audio stream. To support multiple sample rates,\nadd logic in hw_params to set the sample rates only to\nthe rx/tx paths that are not already active.\n\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "9c0bc33d23ab05d7a2e68c0a304012effee70294", "tree": "490e8f22f0b95efcb8783cec7303dae43383806c", "parents": [ "a2e9363f069768597687ecd3436d331fc3c1ceb1" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Aug 30 14:18:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:21 2011 -0700" }, "message": "msm: camera: Handle more sensor op mode from userspace\n\nRemove error check to handle more sensor op mode apart\nfrom preview and snapshot. Error check is not needed for\nthe switch case because the resolution update should not\nbe done for other op mode.\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "a2e9363f069768597687ecd3436d331fc3c1ceb1", "tree": "22b410b0a8c19f51c28da6b84b809de3c0043b44", "parents": [ "302911d5ba5cdb2ed344e0156e10bfba5e1248e1" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 13:36:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:21 2011 -0700" }, "message": "gpu: ion: Add support for carveout heaps on msm targets\n\nAdd infrastructure for supporting ion carveout heaps.\nThe memory type should be specified in the board file using\nmach/ion.h. The ion platform driver will be responsible for\nallocating the correct memory.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "302911d5ba5cdb2ed344e0156e10bfba5e1248e1", "tree": "7668dfac798813fd32464060fcb76b10078b8699", "parents": [ "c46636308ea645b5e555955f3679bea6a01001a8" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Aug 15 17:12:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:20 2011 -0700" }, "message": "gpu: ion: Add platform driver for msm ion\n\nAdd platform driver for msm specific ion devices\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "c46636308ea645b5e555955f3679bea6a01001a8", "tree": "c84f0ae9fc0f05ef87e0941c7fbf25b34ee525a0", "parents": [ "8fef09a792fe01ec564d09a2b0b29d2bfa55fd21" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Wed Aug 31 19:55:38 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:19 2011 -0700" }, "message": "msm: sdio: fix a bug in sdio_close() in case of jiffies wraparound\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "8fef09a792fe01ec564d09a2b0b29d2bfa55fd21", "tree": "db6b63b659a3a5e19aa84720588703b862131d48", "parents": [ "07ef788243461ff0aa60766f13d39bef3e5969a1" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Tue Aug 09 17:36:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:19 2011 -0700" }, "message": "msm_fb: display: Remove histogram memcpy from MDP Interrupt handler\n\nCRs-Fixed: 300666\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "07ef788243461ff0aa60766f13d39bef3e5969a1", "tree": "56bed1e54ea0eaf5bbf2b976b9d6ba750a09547a", "parents": [ "2c07eb5f7112e7c3f977f8911e42a8934aedf5ae" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Tue Aug 09 15:50:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:18 2011 -0700" }, "message": "msm: display: Add MDP version support for 7x27, 8x50, 7x30 targets\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-qrdc.c\n\tarch/arm/mach-msm/board-qt8660.c\n" }, { "commit": "2c07eb5f7112e7c3f977f8911e42a8934aedf5ae", "tree": "b28f1d9f4ed1cbaafd5bdf855c0edca7042f6bb0", "parents": [ "844b1c87139193c473b0b31ccb2e37e13cbc34f6" ], "author": { "name": "Neema Shetty", "email": "nshetty@codeaurora.org", "time": "Sun Aug 21 20:33:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:18 2011 -0700" }, "message": "ASoC: msm: Add support for multiple instance.\n\nAdd support for concurrent voice and VoIP calls.\n\nSigned-off-by: Neema Shetty \u003cnshetty@codeaurora.org\u003e\n" }, { "commit": "844b1c87139193c473b0b31ccb2e37e13cbc34f6", "tree": "3ca954cf62d6531da6dce64e34c037c6861ea045", "parents": [ "b3fc78c25c49e5395f2e59cca5ec0d74408406dd" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Mon Aug 29 15:26:06 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:17 2011 -0700" }, "message": "msm: kgsl: IRQ must be off after _stop is called\n\nringbuffer_stop \u0026 mmu_stop will turn on the IRQ handler.\nTurn it off after they are called.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "b3fc78c25c49e5395f2e59cca5ec0d74408406dd", "tree": "022c73aac34a174f348c640779b1db344e4beaa4", "parents": [ "5578bdb65df40de60c47f87be1f62a2ea332e973" ], "author": { "name": "Chandra Devireddy", "email": "cdevired@codeaurora.org", "time": "Tue Aug 30 17:25:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:16 2011 -0700" }, "message": "USB: msm72k_otg: disable BAM mode\n\nIn BAM mode, USB core does posted writes on AHB bus, when it moves\nthe received setup packet to the memory. This might lead HW to fail in\ncopying the setup packet into the memory, before software reads. This\nleads data corruption in setup packet and might lead USB re-enumeration.\n\nIf we don\u0027t use BAM mode for USB, then we should explicitly disable\nthe USB BAM mode by setting bit-13 of USB_GEN_CONFIG register. This\nwould prevent posted writes and resolves the above issue.\n\nSigned-off-by: Chandra Devireddy \u003ccdevired@codeaurora.org\u003e\n" }, { "commit": "5578bdb65df40de60c47f87be1f62a2ea332e973", "tree": "4c679ef2ae6875959946b733b789c63aa9beb851", "parents": [ "d783499ad3e5835568711cfcc009994e1db00a81" ], "author": { "name": "Joel Nider", "email": "jnider@codeaurora.org", "time": "Fri Aug 12 09:37:11 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:16 2011 -0700" }, "message": "tsif: tsif1 initialization bug fix\n\nWhen using CONFIG_MSM_USE_TSIF1 to enable the second tsif instance,\nthe device initialization failed because of a errant device ID. The\ncheck has been updated to accept the correct device ID range (0..1)\n\nSigned-off-by: Joel Nider \u003cjnider@codeaurora.org\u003e\n" }, { "commit": "d783499ad3e5835568711cfcc009994e1db00a81", "tree": "cad65f7d23d41e1dd2b5365f1b70ea448839f3e0", "parents": [ "bd6a49a2a0106be24d3be34b7e8dbe8cc6f5c1a0" ], "author": { "name": "Ankit Verma", "email": "ankitv@codeaurora.org", "time": "Mon Aug 22 12:29:33 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:15 2011 -0700" }, "message": "mfd: marimba: Return proper error when marimba read/write fails.\n\nReturn proper error when marimba read/write fails.\n\nCRs-Fixed: 295515\nSigned-off-by: Ankit Verma \u003cankitv@codeaurora.org\u003e\n" }, { "commit": "bd6a49a2a0106be24d3be34b7e8dbe8cc6f5c1a0", "tree": "4c48e6a28f7a368d30bd69f5a238af85ab37deaa", "parents": [ "e35585d0b981110b2486b2cc08a741ae50a0f49e" ], "author": { "name": "Inga Stotland", "email": "ingas@codeaurora.org", "time": "Tue Aug 23 16:13:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:15 2011 -0700" }, "message": "Bluetooth: Handle disconnect for LE links.\n\nAdditional check whether the disconnect request is\ncoming on LE link.\n\nSigned-off-by: Inga Stotland \u003cingas@codeaurora.org\u003e\n" }, { "commit": "e35585d0b981110b2486b2cc08a741ae50a0f49e", "tree": "0a528bfeeca3d6076b2a26d464d0aedeb40bb729", "parents": [ "70a8e7d29dc43c298568be6c4720510b073f412c" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Aug 17 20:04:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:14 2011 -0700" }, "message": "msm: irq-vic: Add INT_ADSP_A11 interrupt for fsm9xxx\n\nAdded INT_ADSP_A11 irq entry into msm_irq_to_smsm[]\nfor the fsm9xxx targets.\n\nAcked-by: Kaushik Sikdar \u003cksikdar@qualcomm.com\u003e\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "70a8e7d29dc43c298568be6c4720510b073f412c", "tree": "e621791d44b0362b079b0074d36ec4939b1163d2", "parents": [ "1efef08e36674ee28b00e14e524b809a6aa85ee0" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Fri Sep 02 14:29:18 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:14 2011 -0700" }, "message": "msm_serial_hs_lite: Set UART Clock rate to zero, only when it is disable\n\nUART Core clock set rate is getting called before actually disabling uart\ncore clock. This problem has been seen with console suspend due to setting\nclock rate to zero from msm_hsl_power api. This change makes sure that uart\ncore clock is actually disabled before it is set to zero.\n\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "1efef08e36674ee28b00e14e524b809a6aa85ee0", "tree": "48c5f49ad7bb2c19456d604979368c945641229c", "parents": [ "67141e301b814c98970df8a4219549c0e54a03ed" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Wed Jul 13 13:02:38 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:13 2011 -0700" }, "message": "msm: sdio_cmux: fix corner case in back to back probes\n\nIf back to back probes occur because of subsystem restart, and\nsdio_open() fails multiple times, sdio_cmux_probe() could attempt to\nre-free an already freed workqueue, causing a kernel panic.\n\nThe cmux workqueues should not be freed once allocated and the driver\ngoes into the initialized state. Change the error handling to correct\nthat.\n\nCRs-Fixed: 295466\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" } ], "next": "67141e301b814c98970df8a4219549c0e54a03ed" }