)]}' { "log": [ { "commit": "1efef08e36674ee28b00e14e524b809a6aa85ee0", "tree": "48c5f49ad7bb2c19456d604979368c945641229c", "parents": [ "67141e301b814c98970df8a4219549c0e54a03ed" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Wed Jul 13 13:02:38 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:13 2011 -0700" }, "message": "msm: sdio_cmux: fix corner case in back to back probes\n\nIf back to back probes occur because of subsystem restart, and\nsdio_open() fails multiple times, sdio_cmux_probe() could attempt to\nre-free an already freed workqueue, causing a kernel panic.\n\nThe cmux workqueues should not be freed once allocated and the driver\ngoes into the initialized state. Change the error handling to correct\nthat.\n\nCRs-Fixed: 295466\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "67141e301b814c98970df8a4219549c0e54a03ed", "tree": "6566f54e2e01c8a7050abfa82336689bd21faf67", "parents": [ "0e027b77a82df024f8ba819f685989e8c684e6c8" ], "author": { "name": "Jeffrey Chuang", "email": "fchuang@codeaurora.org", "time": "Tue Aug 30 17:14:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:12 2011 -0700" }, "message": "Revert \"Revert \"msm: 8960: WCNSS restart module, removed Watchdog bite IRQ\"\"\n\nThis reverts commit c9ff2208b2db905923dbb358bfb93ff8782ffc2c.\n\nSigned-off-by: Jeffrey Chuang \u003cfchuang@codeaurora.org\u003e\n" }, { "commit": "0e027b77a82df024f8ba819f685989e8c684e6c8", "tree": "64bb953476abc3fa483537fcc58ab7ce79911627", "parents": [ "87bda5a4b2e9a2f211b7ab990a9d6f9bfb39524e" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Tue Aug 30 17:40:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:12 2011 -0700" }, "message": "Revert \"msm: msm_sdcc: Add DDR support for eMMC/MMC\"\n\nThis reverts commit 279aa8dd1dd7dabcb655d7f78c5304f3533b4d41.\n\nCRs-Fixed: 300095\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "87bda5a4b2e9a2f211b7ab990a9d6f9bfb39524e", "tree": "a94bb27e65665cdb07f2c24e2c9a413570bb40fa", "parents": [ "078c9e3a9aa5f0fbf57f7b5a273f11306c0cd370" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Tue Aug 30 17:40:44 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:11 2011 -0700" }, "message": "Revert \"msm: 8960: increase the drive strength for SDC1 DATA \u0026 CMD lines\"\n\nThis reverts commit a138437ccc9a27775a56f42f39d8d8a8e23d4c0f.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "078c9e3a9aa5f0fbf57f7b5a273f11306c0cd370", "tree": "14fefa3e8b82398b06e3f87a1021d1f0853c7963", "parents": [ "fe7abc088b52d20b47b84737bad0517acfd8a551" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Aug 29 19:33:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:11 2011 -0700" }, "message": "msm: clock-8960: Don\u0027t disable QDSS AT clock at boot\n\nDisabling the AT clock at boot time causes suspend power collapse\nto fail the second time. Don\u0027t turn off the clock so that power\ncollapse keeps working.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "fe7abc088b52d20b47b84737bad0517acfd8a551", "tree": "eabedff9ed24311d3f3abd3fbe4ec76f5da89cda", "parents": [ "9559ee42d03855217bd884d814a643f85faa1c6d" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Tue Aug 09 13:27:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:10 2011 -0700" }, "message": "mm camera: Add pmem vaddr mapping in HAL\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "9559ee42d03855217bd884d814a643f85faa1c6d", "tree": "1eb2719da3daceeb14bc2b20bd2aa5c2da13f5c8", "parents": [ "8487f71cd28338e6ed4346397006d52c90e36ef1" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Tue Aug 09 11:54:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:10 2011 -0700" }, "message": "msm camera: separate daemon pmem mapping away from video node\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "8487f71cd28338e6ed4346397006d52c90e36ef1", "tree": "bd456d521c10284fc70441aa272d23fe9f2f5b62", "parents": [ "5d697e1dee12f61a669f5d628cfbc21ec75752b5" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Aug 29 12:10:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:09 2011 -0700" }, "message": "msm: clock-8960: Bump up rotator max freq to 200Mhz\n\nThe rotator clock supports up to 200Mhz at nominal voltage.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "5d697e1dee12f61a669f5d628cfbc21ec75752b5", "tree": "91ef358c0c26bf0cf9d12f3c695db7a0eeeedaac", "parents": [ "396562a31615c4e9af91decc1c168ac67447a73e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 24 19:36:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:08 2011 -0700" }, "message": "power: pm8921-charger: remove efficiency improvements\n\nWriting 0x8C to 0x209 makes the pmic charging efficient but causes\na voltage to appear on usb after it is removed. This makes the\nphone never detect usb removal. Remove writing 0x8C to 0x209.\n\nAlso remove writing 0xF1 to 0x209. This was thought to be helping\nwith the issue, but it did not help.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "396562a31615c4e9af91decc1c168ac67447a73e", "tree": "b2ae7f7e5d654b38e4d38dad8ea234b9b65bc1f5", "parents": [ "f389606af78f0a8a32c32d9f4a0124afbc1d6a1f" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Thu Aug 25 11:39:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:08 2011 -0700" }, "message": "usb: gsmd: Free usb ep req if req staus is cable disconnection\n\nUSB ep request is being added to the list and being freed later\nw/o deleting from the list when usb cable is disonnected. This\nis causing memory corruption and kernel panic in other function\ndrivers. Fix the issue by not adding the request to list during\ncable disconnection\n\nCRs-Fixed: 301905\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "f389606af78f0a8a32c32d9f4a0124afbc1d6a1f", "tree": "3e32e639fb453aabce20cb418198ae86498ed171", "parents": [ "0a8ad170516c9610d2c2781839ab97c6ec79fb04" ], "author": { "name": "Sushmita Susheelendra", "email": "ssusheel@codeaurora.org", "time": "Fri Aug 12 16:33:10 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:07 2011 -0700" }, "message": "msm: kgsl: Record missing memory writes to the cff dump\n\nThe buffers memstore and dummyspace were being memset\nbefore memory for them was allocated and mapped.\nkgsl_cff_parse_ibs should record the write instead\nof returning upon encoutering a hostaddr with no\nphysical addr.\nWrites to GMEM were not being recorded. Adding\nthe mem syncs for that\n\nSigned-off-by: Sushmita Susheelendra \u003cssusheel@codeaurora.org\u003e\n" }, { "commit": "0a8ad170516c9610d2c2781839ab97c6ec79fb04", "tree": "a170be3dd628c43d1b5820ba6d9504bb1d9bbf86", "parents": [ "636585de21a6c57b89b355e76007487e8050aab9" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri Aug 12 13:32:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:07 2011 -0700" }, "message": "ASoC: WCD9310: Enable Lineout 5\n\nCRs-Fixed: 298249\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "636585de21a6c57b89b355e76007487e8050aab9", "tree": "64f91334cdcb6c0c23332317ed12a5721a6e6bd3", "parents": [ "0fda560b27f6a816419cee3741f13565768ca8fc" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 18 16:14:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:06 2011 -0700" }, "message": "mfd: pm8xxx-irq: get rid of using chained handler\n\nThe chained handler bypasses the flow handlers, which are essential\nin managing the interrupts while they are disabled or suspended.\n\nRemove the usage of chained handlers and switch to using action handlers.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/pm8xxx-irq.c\n" }, { "commit": "0fda560b27f6a816419cee3741f13565768ca8fc", "tree": "937b674b0ba2a70a60d9eee4e76f85b43c3a6424", "parents": [ "fb136486969a4ee3eec388c5f7c115383547c2db" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 17 18:00:55 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:06 2011 -0700" }, "message": "msm: board-msm8960:remove PM8921_MPP_IRQ_BASE\n\nThere is no need to track where the PM8921_MPP_IRQ_BASE starts.\nClean up this code. Consequently clean up the start of SX150X\ninterrupts. They should start after the pmic interrupts.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "fb136486969a4ee3eec388c5f7c115383547c2db", "tree": "578474da4fca4690fe79f98cc82f7b1d0509027d", "parents": [ "ef955cdb8d537686cd5eb57dc203c07056e3d894" ], "author": { "name": "Ashwin Chaugule", "email": "ashwinc@codeaurora.org", "time": "Fri Aug 12 16:15:33 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:05 2011 -0700" }, "message": "ARM: Perfevents: Remove erroneous constraint on number of active events\n\nThe original intent was to restrict the number of active events to number\nof available counters at init. But this code had the side effect of events\nneedelessly reserving a slot even when they couldn\u0027t be armed on the PMU.\n\nEventually this resource reservation code will be replaced entirely.\nFor now, we lazily deny event allocation just before arming them on\nthe PMU.\n\nSigned-off-by: Ashwin Chaugule \u003cashwinc@codeaurora.org\u003e\n" }, { "commit": "ef955cdb8d537686cd5eb57dc203c07056e3d894", "tree": "88a4d5720a685cc3e6abc277d0b4900955123796", "parents": [ "63215126dc0cd0e14d5acbdcfc4dc03dfb3e2a41" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Thu Aug 25 17:11:00 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:04 2011 -0700" }, "message": "ASoC: msm8960: Remove EOS command while closing session.\n\nAt time of pcm_close session is already drained.\nHence no need for EOS command while closing operation as it\nadds unnecessary delay.\n\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "63215126dc0cd0e14d5acbdcfc4dc03dfb3e2a41", "tree": "0beeb72dbbc124e6511bac568ffb93c24eaf0dff", "parents": [ "293217d6c2f649838ec82f251d929dc59316e3fc" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Aug 25 14:43:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:04 2011 -0700" }, "message": "msm: charm: Wait for status to go low in panic handler\n\nWhen a panic occurs in the kernel, the external modem\nresponds and goes through its own shutdown process.\nWait until the external modem gives a signal that\nit has finished shutting down (dropping MDM2AP_STATUS)\nbefore exiting the panic handler.\n\nCRs-Fixed: 303416\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "293217d6c2f649838ec82f251d929dc59316e3fc", "tree": "f7a24801e66da6fd1b6109330669f39e1075cfa1", "parents": [ "1d17cf51b5592669a550c83d6974d325b66247b3" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Aug 19 17:50:52 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:03 2011 -0700" }, "message": "msm: kgsl: New low power level\n\nSaves ~8ma at battery for low fps apps.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "1d17cf51b5592669a550c83d6974d325b66247b3", "tree": "b396272208c096496974faefcd2476a36b4f0217", "parents": [ "41f8fa330664879217c2fef2dd373446c9c650ca" ], "author": { "name": "Justin Paupore", "email": "jpaupore@codeaurora.org", "time": "Tue Aug 16 15:39:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:03 2011 -0700" }, "message": "regulator: Add regulator_bulk_set_voltage\n\nAdd a convenience API to set the voltage on multiple consumers\nstored in a struct regulator_bulk_data[] in one API call.\n\nSigned-off-by: Justin Paupore \u003cjpaupore@codeaurora.org\u003e\n" }, { "commit": "41f8fa330664879217c2fef2dd373446c9c650ca", "tree": "a284daa9b13276f41256e098c62433656a74eb53", "parents": [ "e0b55321970acbdefdeb5d2eff76ffd1b87861af" ], "author": { "name": "Sushmita Susheelendra", "email": "ssusheel@codeaurora.org", "time": "Wed May 11 17:15:58 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:02 2011 -0700" }, "message": "msm: kgsl: Add CFF user event ioctl to write data to cff dumps\n\nAdd the ioctl IOCTL_KGSL_CFF_USER_EVENT to write data to cff dump.\nDefine a new CFF packet cff_op_user_event for this generic user\nevent.\nWrite the surface parameter data packet and verify mem file\npacket to cff dumps\n\nSigned-off-by: Sushmita Susheelendra \u003cssusheel@codeaurora.org\u003e\n" }, { "commit": "e0b55321970acbdefdeb5d2eff76ffd1b87861af", "tree": "0b332dbe68884dda21907e32ca5a2632337f0494", "parents": [ "33dc7b93d4fd73307bb8f68f8067cbe481c5bbcb" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Tue Aug 23 10:54:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:02 2011 -0700" }, "message": "msm: audio: qdsp6v2: Wait indefinitely for subsystems to be loaded.\n\nWait indefinitely for lpass or modem to be loaded instead of waiting\nfor a timeout of 5secs. The reason being downloading of images might\ntake long time.\n\nCRs-fixed: 302002\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "33dc7b93d4fd73307bb8f68f8067cbe481c5bbcb", "tree": "62ff029fe47c0d19703c4b2648acae537c262dfa", "parents": [ "0e8a5ade33956340ae5afd604d042f39a7fc1237" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Thu Aug 18 16:16:12 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:01 2011 -0700" }, "message": "msm_fb: display: fix YCrCb planar input format support in mdp\n\nMDP hardware expects source addresses to be in YCbCr order, in order to\nsupport YCrCb, need to swap chroma planes addresses.\n\nCRs-Fixed: 302408\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "0e8a5ade33956340ae5afd604d042f39a7fc1237", "tree": "573179a69178fa517403117d77d73e7866b768fe", "parents": [ "8b621e42799c3427c5080b9f9458e0b445dd05f5" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Mon Aug 29 10:32:43 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:00 2011 -0700" }, "message": "msm: sdio: creating a debugfs tree of nodes for testing purposes\n\nunder sys/kernel/debug/sdio_al_test directory there will be all files,\nthat by writing to them, the spesific test will be executed.\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "8b621e42799c3427c5080b9f9458e0b445dd05f5", "tree": "3c2bbf17fa68570d4b7b1342c17d735f8ed501bb", "parents": [ "a0101bac77ed3deb50291801211178d0fa4294b0" ], "author": { "name": "Praveena Pachipulusu", "email": "pveena@codeaurora.org", "time": "Wed Aug 10 18:17:07 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:00 2011 -0700" }, "message": "input: cyttsp-i2c: Change the permission of firmware sysfs entries\n\nCRs-fixed: 302911\nSigned-off-by: Praveena Pachipulusu \u003cpveena@codeaurora.org\u003e\n" }, { "commit": "a0101bac77ed3deb50291801211178d0fa4294b0", "tree": "3178a69784a229b0160399d0d3f7f7a7b5daa094", "parents": [ "7cf018e8124b8fce44cd4ef3d31de42d604c5e1f" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Thu Aug 11 20:05:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:59 2011 -0700" }, "message": "ASoC: msm8960: Enable physical digital mics 4,5 and 6\n\nDigital Mic 4 and 5 are applicable to FLUID, MTP and CDP\nwhereas Digital Mic 6 is present only on CDP. Add audio map\nfor these mics assuming FLUID as the default device.\n\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "7cf018e8124b8fce44cd4ef3d31de42d604c5e1f", "tree": "9b0024991d0440ff026bf8165ea5054a2ef3c241", "parents": [ "e31d133d4c581b3dc13b8073dc36e55a0598843a" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Thu Aug 11 18:58:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:59 2011 -0700" }, "message": "ASoC: WCD9310: Enable digital mic 4,5 and 6 inputs\n\nEnable the codec input lines for digital mic 4,5 and 6.\n\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "e31d133d4c581b3dc13b8073dc36e55a0598843a", "tree": "7854432e29c3d0e973379fe42461d7be16c49a9c", "parents": [ "0a0fe6a2a6bf9496373d73545b81a1f063399b6c" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed Aug 24 17:12:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:58 2011 -0700" }, "message": "msm: charm: Wake up the external modem when panicking\n\nIn order for the external modem to properly respond to\na panic, it must be out of low power mode. Ensure the\nexternal modem is woken up before leaving the panic\nhandler.\n\nCRs-Fixed: 303416\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "0a0fe6a2a6bf9496373d73545b81a1f063399b6c", "tree": "11a659ca471a0af066c83ec5549d23c63243c8a8", "parents": [ "24161a643a3d3c491922871e4053bdae05f7cd09" ], "author": { "name": "Rajeshwar Kurapaty", "email": "rkurapat@codeaurora.org", "time": "Tue Aug 23 18:57:58 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:58 2011 -0700" }, "message": "vidc: 720p: Handle profile unknown as bitstream error.\n\nFor corrupted VOL header in the middle of playback\ncore is returning UNKNOWN PROFILE error and is being\ntreated as Fatal error and playback is getting aborted.\nNow handling it as sequence header fail/recoverable\nerror.\n\nCRs-Fixed: 302549\nSigned-off-by: Rajeshwar Kurapaty \u003crkurapat@codeaurora.org\u003e\n" }, { "commit": "24161a643a3d3c491922871e4053bdae05f7cd09", "tree": "61aa159a95c5f0cca987a75c94297dc46b8b9f69", "parents": [ "60c9b4b05e80b5528b1220c6cdc71a54d8880f09" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Sun Aug 28 18:18:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:57 2011 -0700" }, "message": "Revert \"msm: 8960: WCNSS restart module, removed Watchdog bite IRQ\"\n\nThis reverts commit 895293124ddd122607221e908e99f150bc074c2d.\n\nSigned-off-by: Bryan Huntsman \u003cbryanh@codeaurora.org\u003e\n" }, { "commit": "60c9b4b05e80b5528b1220c6cdc71a54d8880f09", "tree": "1bb3e0b17decc28cf3018ac3ded6f910d54c9e1c", "parents": [ "5caa02c3ff4e5c4e692527e15598692855e4abc6" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Sun Aug 28 18:19:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:56 2011 -0700" }, "message": "Revert \"wcnss: Cancel Apps vote for Riva and Iris regulators once Riva is up\"\n\nThis reverts commit b120278042ddbccac9627186c3f691ff4614372e.\n\nSigned-off-by: Bryan Huntsman \u003cbryanh@codeaurora.org\u003e\n" }, { "commit": "5caa02c3ff4e5c4e692527e15598692855e4abc6", "tree": "ed17b9f2c2c97b840d923095cfe39fb0bd89640f", "parents": [ "b618ec2b43eba5c06c86e8faa4a48706aca7dc98" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 15 20:11:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:56 2011 -0700" }, "message": "mfd: pm8921-core: print restart reason\n\nlog the restart reason in the probe function.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "b618ec2b43eba5c06c86e8faa4a48706aca7dc98", "tree": "49ef181b4b01d8eecdc4db797ab9e8309734c135", "parents": [ "a55500bdd4306bb9b61aeee3022f5f0c1b5114dc" ], "author": { "name": "Neil Leeder", "email": "nleeder@codeaurora.org", "time": "Fri Aug 26 10:22:28 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:55 2011 -0700" }, "message": "msm: build pmu.o for 7x27a\n\nAdd pmu support for 7x27a\n\nSigned-off-by: Neil Leeder \u003cnleeder@codeaurora.org\u003e\n" }, { "commit": "a55500bdd4306bb9b61aeee3022f5f0c1b5114dc", "tree": "518657b40cd85cee74731223c854f9d9014039b2", "parents": [ "27663840be133c872ac5ecb4b7a76a788d3e095a" ], "author": { "name": "Wentao Xu", "email": "wentaox@codeaurora.org", "time": "Tue Aug 16 18:15:04 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:55 2011 -0700" }, "message": "msm: dsps: DSPS support for Sub System Restart (SSR)\n\nRegister handler for SMSM_RESET notifications and watchdog\ninterrupts from the DSPS. And add support for reset via\nIOCTL from user-mode application.\n\nSigned-off-by: Wentao Xu \u003cwentaox@codeaurora.org\u003e\n" }, { "commit": "27663840be133c872ac5ecb4b7a76a788d3e095a", "tree": "35bd0e68e12424ee467f867081731c40d839b0ca", "parents": [ "2f789d14b806e93137bea9416302029c7dfcc496" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Aug 25 15:11:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:54 2011 -0700" }, "message": "msm: acpuclock-8960: Replace socinfo use with cpu_is_krait_v1()\n\nSome of the code in the hotplug path is really specific to\nthe Krait v1 processor, not a specific SoC version. Replace\nthese checks with one that is more precise.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "2f789d14b806e93137bea9416302029c7dfcc496", "tree": "bb69c76498cffed8ba061f7fd613aad914350772", "parents": [ "fbb46aabd35f4d4940b5e8471c015431b77db9ef" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Wed Aug 24 12:40:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:54 2011 -0700" }, "message": "msm: kgsl: stop forcing hw patchid to 0 for 8x60 and 8960\n\nThis field of the chip_id was forced to 0 because userspace\ngot confused when it was a different value. Userspace has\nbeen corrected to deal with the correct patch ids.\n\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "fbb46aabd35f4d4940b5e8471c015431b77db9ef", "tree": "194d949aaf375c7c0f67f4267cfd8e96b1b4f07d", "parents": [ "f058a440785ed1f3e4083b41065997317def8f9a" ], "author": { "name": "Sushmita Susheelendra", "email": "ssusheel@codeaurora.org", "time": "Thu Aug 25 18:05:08 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:53 2011 -0700" }, "message": "msm: kgsl: Fix ringbuffer command names\n\nThe prefix PM4_ was changed to CP_.\n\nSigned-off-by: Sushmita Susheelendra \u003cssusheel@codeaurora.org\u003e\n" }, { "commit": "f058a440785ed1f3e4083b41065997317def8f9a", "tree": "c84e72eb4d239bdc6174cd9c03e668bace8e6181", "parents": [ "caf114bc5d104f7291eb4ab850f7daff490cf678" ], "author": { "name": "Mat Martineau", "email": "mathewm@codeaurora.org", "time": "Fri Aug 26 09:33:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:52 2011 -0700" }, "message": "Bluetooth: Revert \"Bluetooth: Increase AUTO_OFF timeout for HCI devices\"\n\nThis reverts commit 24fac10d7e110035f61cf4bd69018adc84f15fc1.\n\nSigned-off-by: Mat Martineau \u003cmathewm@codeaurora.org\u003e\n" }, { "commit": "caf114bc5d104f7291eb4ab850f7daff490cf678", "tree": "be908724bbc58a487e233fb6c66e394cc5a7fa46", "parents": [ "973e4bae4bd8bde3d020e6d40f1e09c8cd9fb19e" ], "author": { "name": "Neil Leeder", "email": "nleeder@codeaurora.org", "time": "Fri Aug 26 10:19:37 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:52 2011 -0700" }, "message": "msm: rename PMU irq for 7xxx\n\nMake the name the same as for other platforms so it can be\nused by the common code in pmu.c\n\nSigned-off-by: Neil Leeder \u003cnleeder@codeaurora.org\u003e\n" }, { "commit": "973e4bae4bd8bde3d020e6d40f1e09c8cd9fb19e", "tree": "96cbcc5af0dd2eeb9dae309d32936fb868a4f568", "parents": [ "8f13e5b3e465215538645405ac0c48daa9c2c558" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Jul 12 17:06:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:51 2011 -0700" }, "message": "msm: clock-8960: Support QDSS clocks\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "8f13e5b3e465215538645405ac0c48daa9c2c558", "tree": "4fe93ce01208a3ce4b26a85cd7b1b73b4cbd493c", "parents": [ "b7f0284e061f148882af2cdd44266a9a4e9c4177" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Aug 04 21:15:11 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:51 2011 -0700" }, "message": "mmc: msm_sdcc: check MCLK_REG_WR_ACTIVE bit for register write completion\n\nWhen SW writes to MCI_POWER, MCI_CLK, MCI_CMD and MCI_DATA_CTL\nregisters, the register write operation is completed after\n3HCLK + 2 MCLK clock cycles. SW should access these registers\nonly after the register write operation is completed.\nThis synchronization delay can\u0027t be ignored, especially in case\nthe MCLK is slow (e.g. 400 KHz).\n\nSpecial status bit is defined to wait properly for register\nwrite completion bit MCLK_REG_WR_ACTIVE of MCI_STATUS2 register.\n\nSW should always wait until bit MCLK_REG_WR_ACTIVE of MCI_STATUS2\nregister is low after writing to one of mentioned above registers\nand before accessing them again.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "b7f0284e061f148882af2cdd44266a9a4e9c4177", "tree": "af7e013f25a2bdea3222140963dd70ff77f51bd3", "parents": [ "67f29373f604492d47ebdbadfd30a20debceed47" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Fri Aug 26 01:04:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:50 2011 -0700" }, "message": "wcnss: Cancel Apps vote for Riva and Iris regulators once Riva is up\n\nAcked-by: Kumar Anand \u003ckanand@qca.qualcomm.com\u003e\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "67f29373f604492d47ebdbadfd30a20debceed47", "tree": "a80a2e085fb0a5d3dd02ccf091ac28721bfb4a4d", "parents": [ "e1a86060db7ecb7be19cff9e16284cfd30410518" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Thu Aug 25 11:17:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:50 2011 -0700" }, "message": "msm: 8960: WCNSS restart module, removed Watchdog bite IRQ\n\nWatchdog bite interrupt is expected to be a level interrupt.\nHowever when requested for this interrupt, Krait0 has trouble\nin power collapse. APSS may be expecting an edge triggered\ninterrupt.\n\nAcked-by: Sameer Thalappil \u003csameert@qca.qualcomm.com\u003e\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "e1a86060db7ecb7be19cff9e16284cfd30410518", "tree": "57fef9e1977099f3584b7c730ed5c1dbf6e8b376", "parents": [ "37ce38431e6ce538e853daea8d309d5195d9c607" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Aug 18 17:46:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:49 2011 -0700" }, "message": "msm: clock: Use device names to distinguish between ADM clocks\n\nDrivers should now use their device names to distinguish between\nclocks of the same type rather than the clock name. This allows\nthe clock names to be updated to match the new naming convention.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "37ce38431e6ce538e853daea8d309d5195d9c607", "tree": "b099e7a7241d397e5bae20156ca71973e88440be", "parents": [ "62cf63ea8ef44c3bb893045f1d8b440d298e2e35" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 17 16:00:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:48 2011 -0700" }, "message": "msm: clock: Rename SDC clocks to match new naming convention\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "62cf63ea8ef44c3bb893045f1d8b440d298e2e35", "tree": "871f22b2b8798d277b893e2f836d8ae646952a31", "parents": [ "3405933cf3c41fa1f297f1c2c4318b4258b89b33" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 17 16:34:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:48 2011 -0700" }, "message": "msm: clock: Rename unused GSBI clocks to match new naming convention\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "3405933cf3c41fa1f297f1c2c4318b4258b89b33", "tree": "505ac54e35f18f143cba2fc74b74d3b86e9d1ace", "parents": [ "6fe50a87c3d0d4b2bf9e7ba9e8c2749b155c5bbe" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Aug 16 19:19:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:47 2011 -0700" }, "message": "msm: board-8960: add parameters for BTM\n\nThe support for battery temperature monitoring is added in the\n8921 pmic charger driver. Add parameters in the board file to\nconfigure it.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "6fe50a87c3d0d4b2bf9e7ba9e8c2749b155c5bbe", "tree": "0ecb468f1879588b40ee9c6761de394e36232dd4", "parents": [ "26cef9c5c9191ab7bca6a23dbbbdca56d6db1690" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 25 21:33:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:47 2011 -0700" }, "message": "power: pm8921-charger: api to control input regulation\n\nThe pmic charger can take measures such as reducing charing\ncurrent if the input charger voltage falls below certain point.\nCreate api to use this feature.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "26cef9c5c9191ab7bca6a23dbbbdca56d6db1690", "tree": "7d2ccaf217835095a738774c1b5186721e8e8eba", "parents": [ "86eea3087349a7c9d73d69912fd10648ec7f1c03" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 25 19:16:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:46 2011 -0700" }, "message": "power: pm8921-charger: api to control trkl charging\n\nProvide mechanism to set trickle, weak voltage and currents via\nboard file. These settings are used to configure the hardware\ncontrolled auto trickle charging.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "86eea3087349a7c9d73d69912fd10648ec7f1c03", "tree": "5f18cd0bd862d65a9803a3ac07b0cbc2c557ec07", "parents": [ "93249a9485ee098b6e527e6f23dfc92686eb9e61" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 15 13:55:18 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:46 2011 -0700" }, "message": "power: pm8921-charger: implement temperature control\n\npm8921 has a special hardware to monitor the battery temperature. Use\nthis block to program the cool and warm thresholds and reduce charging\ncurrent accordingly.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "93249a9485ee098b6e527e6f23dfc92686eb9e61", "tree": "deaee21201b188e6b405f94d78acfe7a3d4f0da9", "parents": [ "48bc4ee915717166ad735d852bd52491494086ce" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Aug 09 14:28:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:45 2011 -0700" }, "message": "mfd: pm8921-adc: Add BTM thermistor table\n\nBTM (Battery Temperature Module) thermistor lookup\ntable is computed based on the resistor divider\u0027s\nused on the board and the specifications of the\nthermistor. Its a function of temperature vs the\nADC code for PM8921 ADC and is used to set the\ncool/warm thresholds on the BTM.\n\nCRs-Fixed: 299646\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "48bc4ee915717166ad735d852bd52491494086ce", "tree": "d9ceba6635b7fa440f903c2fcf42383b90b7c0ec", "parents": [ "8f972e5c91c3ff4f62852b65ae145c58d0e11118" ], "author": { "name": "Rajeshwar Kurapaty", "email": "rkurapat@codeaurora.org", "time": "Wed Aug 24 18:27:51 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:44 2011 -0700" }, "message": "vidc: 720p: Memset MPEG-4 recon buffers to black\n\nIn the case of MPEG-4 decoding with clips which have\ninitial frames starting with P-VOPs, green macroblocks\nare seen. This is because of recon buffers used for\nMPEG-4 have 0 preset values. The default values are\nchanged to 0x10 \u0026 0x80 for luma and chroma to get\ndefault color as black.\n\nCRs-Fixed: 303298\nSigned-off-by: Rajeshwar Kurapaty \u003crkurapat@codeaurora.org\u003e\n" }, { "commit": "8f972e5c91c3ff4f62852b65ae145c58d0e11118", "tree": "0a5b0c3833f8472a32641003d475df88ecc15052", "parents": [ "85c704939f8b167b0e8709fde7db5d8ee3e3384d" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Wed Aug 24 11:48:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:44 2011 -0700" }, "message": "radio: iris: fix the seek bug during FM TX\n\nThis patch fixes the issue we could not seek to\nanother station in the TX mode when RDS was enabled.\n\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "85c704939f8b167b0e8709fde7db5d8ee3e3384d", "tree": "d2b6c6872144430d5d1af41634a7062a277977c4", "parents": [ "ac294855f68a2411b0283163de1c45994a509a73" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Fri Jun 10 16:07:47 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:43 2011 -0700" }, "message": "msm: msm_bus: Enable support for multi-tiered requests\n\nCurrently only single-tiered requests are forwarded over\ngateways. This raises the priority of all masters on a\nparticular fabric which is undesired.\n\nThis patch enables forwarding multi-tiered requests\nbetween fabrics.\n\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "ac294855f68a2411b0283163de1c45994a509a73", "tree": "fbc09daa6de467a401e045fef2cc7e24efa9c693", "parents": [ "33dbc0052a6610c41fdb239e9e1aba9bac0ffa29" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 17 15:44:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:43 2011 -0700" }, "message": "msm: clock: Rename all I2C/SPI clocks to \u0027core_clk\u0027 or \"iface_clk\"\n\nDrivers should now use their device names to distinguish between\nclocks of the same type rather than the clock name.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-qrdc.c\n\tarch/arm/mach-msm/board-qt8660.c\n" }, { "commit": "33dbc0052a6610c41fdb239e9e1aba9bac0ffa29", "tree": "c57b0251049f1ab25a05b60c9b602dbda1c51ce1", "parents": [ "410383f143c4e464370dd82fa9535619a91f800c" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Thu Aug 25 15:52:53 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:42 2011 -0700" }, "message": "Revert \"msm: bam_dmux: switch to polling on DL\"\n\nThis reverts commit 54d6f481f288753b653b52dc55e8ca96cb7ad14a.\n\nCRs-Fixed: 302704\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "410383f143c4e464370dd82fa9535619a91f800c", "tree": "b6630aff6511f824e5bf8900ff8e292352dcaf0c", "parents": [ "2095e57b1d9bd01d65a64546b21a25f56ffd2dcc" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Fri Jul 22 13:44:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:42 2011 -0700" }, "message": "ASoC: WCD9310: Use SOC_SINGLE_S8_TLV for digital gains\n\nDigital gain registers contain 8-bit two\u0027s complement\ngain values. This allows gain values to span the entire\nrange of the gain, including negative dB gains.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "2095e57b1d9bd01d65a64546b21a25f56ffd2dcc", "tree": "58804fb006a2151f7a93639d1d4d8c711c1e5d62", "parents": [ "c78ee412f72d848e7f58777e8733978c8088d1ab" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Mon Aug 15 18:30:43 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:41 2011 -0700" }, "message": "ASoc: msm: qdsp6: Change packet size to support PCM WB.\n\nChange the packet size to support PCM WB.\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "c78ee412f72d848e7f58777e8733978c8088d1ab", "tree": "c9ed6dd4434466c3e47d1d393931dae289b9b44d", "parents": [ "cc7242351ec4c8b6edfeaac3a52c89e6d0f5bbe4" ], "author": { "name": "Mat Martineau", "email": "mathewm@codeaurora.org", "time": "Thu Aug 25 13:37:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:40 2011 -0700" }, "message": "Bluetooth: Increase AUTO_OFF timeout for HCI devices\n\nThe previous timeout (2 seconds) was too short for use with the 8960.\nNew timeout is 20 seconds.\n\nSigned-off-by: Mat Martineau \u003cmathewm@codeaurora.org\u003e\n" }, { "commit": "cc7242351ec4c8b6edfeaac3a52c89e6d0f5bbe4", "tree": "6a5da4544765d0cae03fb73eb6a2123f7cb700d2", "parents": [ "be6bd8ce1ba1eab49caa79be898e947a38016e02" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Wed Aug 17 17:56:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:40 2011 -0700" }, "message": "msm: pil-8960: Support secure PIL for RIVA\n\nSecure side supports RIVA boot now. Add support for RIVA boot\nwith secure PIL.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "be6bd8ce1ba1eab49caa79be898e947a38016e02", "tree": "b5857a00541931b1a3460ce787c7aa738b013f56", "parents": [ "b24e2c3810f6eca4f8007ca2082c940ad7fbf8d8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 19 12:15:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:39 2011 -0700" }, "message": "power: pm8921-charger: add support for invalid battery\n\nUse adc reading on the battery_id resistor to check if a battery\nis valid. If it is not disable charging.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "b24e2c3810f6eca4f8007ca2082c940ad7fbf8d8", "tree": "001e04f8cb0803b244899b9c9d9cc23a2d94dbf6", "parents": [ "485a053da3be033d26162c32329cec26aba68449" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 17 17:13:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:39 2011 -0700" }, "message": "power: pm8921-charger: various apis\n\nImplement API\u0027s to\n\t- set maximum battery charging current\n\t- disable drawing current from the source\n\t- detect if battery is being charged and which charger source\n\t is charging the battery\n\t- get battery temperature\n\t- detect battery is present\n\t- detect usb is present\n\t- detect dc is present\n\t- set max trickle charging time\n\t- set max auto charging time\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "485a053da3be033d26162c32329cec26aba68449", "tree": "9fbea7e2a293a4927fba0d559633a44ef1de901c", "parents": [ "e27d809933cddb44f5cf5a3d7b6efe1b7a46ad8b" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:18:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:38 2011 -0700" }, "message": "power: pm8921-charger: code cleanup\n\nCustomers of this driver wanted to log if the USB is over voltage or\nunder voltage. Add a print for such conditions.\n\nAlso change the name of the parameter to the pm_chg_iusbmax_set,\nto reflect it is the register value, not the current value.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "e27d809933cddb44f5cf5a3d7b6efe1b7a46ad8b", "tree": "8d60f00ad353f20e1315e85f95e2ffda75f38625", "parents": [ "71816fde13316655dc72baa6e85ee02e73336d0e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:16:29 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:38 2011 -0700" }, "message": "power: pm8921-charger: wakeup upon usb-insertion/removal\n\nWhen the usb is inserted the usb driver needs to be woken up for\nproper enumeration of the device. Mark usb related interrupts\nas wakeup interrupts.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "71816fde13316655dc72baa6e85ee02e73336d0e", "tree": "26924a324dc694d64ccd1e634072de80099eef89", "parents": [ "ad899705e71d5de65db9247d6d26ad109bff4e6c" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:14:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:37 2011 -0700" }, "message": "power: pm8921-charger: fix termination current\n\nThe driver was writing to SAFE current register instead of the\nTERM current register.\n\nFix it.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "ad899705e71d5de65db9247d6d26ad109bff4e6c", "tree": "2b3fae0ac1d01ea4a9ef81e064105e32dade49ec", "parents": [ "da8b6881a9549145b5b94218ef1c905253aa52e3" ], "author": { "name": "Anup Dasari", "email": "adasari@codeaurora.org", "time": "Wed Aug 24 11:46:32 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:36 2011 -0700" }, "message": "defconfig: msm7x27a: Enable DM_CRYPT and CRYPTO_TWOFISH configs\n\nthese config options are required to install some of the userspace\napplications on sdcard\n\nSigned-off-by: Anup Dasari \u003cadasari@codeaurora.org\u003e\n" }, { "commit": "da8b6881a9549145b5b94218ef1c905253aa52e3", "tree": "5ce0797c41c7dcfc7c2d78a0322b95569e6b6619", "parents": [ "2ca30356bd3e2db7de9df06670ff9ba2f6dfafe4" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Fri Aug 19 12:28:57 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:36 2011 -0700" }, "message": "msm: 8960: increase the drive strength for SDC1 DATA \u0026 CMD lines\n\nCurrently drive strength of SDC1 DATA \u0026 CMD lines are set to 10mA\nbut sometimes we are seeing the DATA CRC errors when eMMC\n(connected to SDC1 slot) is running in DDR mode. To avoid this\nDATA CRC errors, this patch increases the drive strength of\nDATA and CMD lines to 16mA.\n\nCRs-Fixed: 300095\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "2ca30356bd3e2db7de9df06670ff9ba2f6dfafe4", "tree": "78136b3d2f2c311b1afd88cb52c55cd78f1353ee", "parents": [ "7ee0dca520191ce1c838d3b081dc3ae62a510497" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Fri Jun 24 18:16:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:35 2011 -0700" }, "message": "msm_fb: display: Fix DSI PLL/clock warnings\n\nCRs-Fixed: 300073\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "7ee0dca520191ce1c838d3b081dc3ae62a510497", "tree": "12f6165dfa29f288974e40b7331f2070165c49fd", "parents": [ "d9df327068bbb5887ec534e4af111a8c3f0b1a0c" ], "author": { "name": "Angshuman Sarkar", "email": "angshuman@codeaurora.org", "time": "Mon Aug 22 21:37:34 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:35 2011 -0700" }, "message": "msm: smd: add spinlock to smem_get_entry\n\nSince smem_alloc2 has been exported it is needed that the\nshared smem allocation table be protected by a spinlock.\n\nSigned-off-by: Angshuman Sarkar \u003cangshuman@codeaurora.org\u003e\n" }, { "commit": "d9df327068bbb5887ec534e4af111a8c3f0b1a0c", "tree": "7a55a85350c17efa746c98a7719199f72f615787", "parents": [ "0ec7618a6b06e937e1d71a4d66e79cd9c9fdf435" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Fri Aug 19 16:50:46 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:34 2011 -0700" }, "message": "mmc: changes to get SDCC work with multi-target binary for 8960 and 8064\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "0ec7618a6b06e937e1d71a4d66e79cd9c9fdf435", "tree": "72e788cb13e529af7fd6fffeeccc005da06a7f2d", "parents": [ "8a28b4a0b6c093923c38d27ff64dff4a41d64cdf" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Fri Jul 29 16:58:11 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:34 2011 -0700" }, "message": "ASoC: msm8960: Add LPA volume control\n\nLPA volume is controlled via dsp stream volume support\navailable. Add TLV mixer control to set LPA stream volume\n\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "8a28b4a0b6c093923c38d27ff64dff4a41d64cdf", "tree": "641a8ccbfc9e59d015aea6e07ab8ecb3509f2010", "parents": [ "c78d9a76d301bc028901de5ad8ea9201a5db32a8" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Aug 10 19:07:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:33 2011 -0700" }, "message": "msm: socinfo: Add support for MSM9615 SOC id\n\nAdds a dummy soc id support as well.\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "c78d9a76d301bc028901de5ad8ea9201a5db32a8", "tree": "dd93aec05f1a18160c6344de3c74bd648581c895", "parents": [ "f6c97c82cb71614a257197d398e36dff15be138a" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Wed Jul 20 00:46:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:32 2011 -0700" }, "message": "msm: clock-local: Replace bank_masks with bank_info pointer\n\nbank_masks are just one of the types of data that can be used for\nthe rcg_clk.set_rate() function. Make this field into a void\npointer to ease overloading of what the set_rate() function can\nuse.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "f6c97c82cb71614a257197d398e36dff15be138a", "tree": "4b7cc6a26504eeacbf2a7b8b8880d8ee8befc0c8", "parents": [ "34ec3697c70452298045d63b0759b1ed491b6b6b" ], "author": { "name": "Oluwafemi Adeyemi", "email": "aadeyemi@codeaurora.org", "time": "Mon Aug 22 10:53:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:31 2011 -0700" }, "message": "mmc: msm_sdcc: Unconditionally send CMD52 after CMD53\n\nAlways send a dummy CMD52 after CMD53 for controllers\nearlier than SDCC4\n\nSigned-off-by: Oluwafemi Adeyemi \u003caadeyemi@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/configs/msm7627-perf_defconfig\n\tarch/arm/configs/msm7627_defconfig\n\tarch/arm/configs/qsd-chromeos-st1q-qrdc_defconfig\n\tarch/arm/mach-msm/board-qrdc.c\n\tchromeos/config/armel/config.flavour.chromeos-st1q-qrdc\n" }, { "commit": "34ec3697c70452298045d63b0759b1ed491b6b6b", "tree": "2ea20227255c82a3d8982e41740de51090abfea7", "parents": [ "2701a44186743e6ff63708d6a2b0708e99c2ff7e" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Tue Aug 16 16:28:04 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:31 2011 -0700" }, "message": "msm: kgsl: Update graphics clock plan\n\nUpdate old 8660 clock plan for 8960 v1 \u0026 v2.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "2701a44186743e6ff63708d6a2b0708e99c2ff7e", "tree": "321111c60068ff40637b4b219b4b6307686be4a6", "parents": [ "9e9b6a1d4e0633edf7b14321e76e68dd46d88be5" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 19 13:47:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:30 2011 -0700" }, "message": "msm: 8064: Add UART device for APQ8064 RUMI3\n\nAdd the device declaration and initialization code for the\nGSBI1 UART device on the APQ8064 RUMI3.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "9e9b6a1d4e0633edf7b14321e76e68dd46d88be5", "tree": "28ab33db32deca6637c43af8167f6e1bfdc97ab1", "parents": [ "1f52c4141cf9f2c5d6a32918d056f93ce3897ef6" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Aug 10 18:52:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:30 2011 -0700" }, "message": "arm: mach-types: Add machine type for MSM9615\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "1f52c4141cf9f2c5d6a32918d056f93ce3897ef6", "tree": "990f14c5ae8a6621766592f7db0035ac9a61974a", "parents": [ "57dcfff1206da4b1f6e3cdbbc63b5c27d57ded24" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:11:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:29 2011 -0700" }, "message": "power: pm8921-charger: add enable/disable api\n\nAdd api to enable/disable battery charging. This api will help\nstart/stop current flowing in the battery for charging purposes, but\nit does not affect the current the device draws from a charger source.\n\nCRs-Fixed: 300786\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "57dcfff1206da4b1f6e3cdbbc63b5c27d57ded24", "tree": "1e9224075c4bbc0b7fee3c68b9f60febc61adae6", "parents": [ "7f7de4f8f82ca83c74a8b8b1892ab1a48fd9e7e2" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Wed Aug 24 14:34:46 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:29 2011 -0700" }, "message": "msm_fb: display: synchronous UI and Video thread\n\nUse mutex to synchronous between UI and Video thread.\nMeanwhile, add yield() when at end of frame push of\nUI thread to prevent UI thread from dominating cpu times.\n\nCRs-fixed: 303246\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "7f7de4f8f82ca83c74a8b8b1892ab1a48fd9e7e2", "tree": "091ce9cf90fafaad458eca77fd9f0b901bd4f541", "parents": [ "3652ed735ca19effa968b363b3d64750c41da042" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Jul 27 10:29:01 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:28 2011 -0700" }, "message": "8060: wlan: Enable wlan on dragonboard\n\nDifferent values for pin_controlled need for dragonboard\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "3652ed735ca19effa968b363b3d64750c41da042", "tree": "b27b68b2f78846fe345eee922f913f0e64fd5766", "parents": [ "9ae8c85dd01ea67047021375700989d29386a355" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Tue Aug 09 16:21:49 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:27 2011 -0700" }, "message": "msm: audio: qdsp6v2: Support VOIP \u0026 Widevoice calibration\n\nAdds support for the VOIP network and Widevoice calibration\nfor all networks.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "9ae8c85dd01ea67047021375700989d29386a355", "tree": "d642957322a647612a9ec90aa3ed35c5de5707b4", "parents": [ "6061bc76edc2be9f0b0d99d8fe66a2ecf92b4ed1" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Aug 12 17:22:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:27 2011 -0700" }, "message": "msm: pmic: Add MSM_RPC_UNINTERRUPTIBLE flag\n\nAdd MSM_RPC_UNINTERRUPTIBLE flag to rpc connect so\nthat when rpc call is awaiting for the reply it\ndoes not get interrupted due to interruption of\npmic client thread.\n\nCRs-Fixed: 300319\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "6061bc76edc2be9f0b0d99d8fe66a2ecf92b4ed1", "tree": "a0e8655d5db606a2fd7e71667bbbce69b84ce828", "parents": [ "a7423e433ea5736234c40e0341d7451af9a8fc15" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Mon Apr 18 15:23:16 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:26 2011 -0700" }, "message": "msm: kgsl: add MEMORY_BASE and HANG packets\n\nThese are changes to the cffdump output format.\nMEMORY_BASE reports the address range we\u0027re using at the start\nof the dump, which helps the postprocessors validate memory\nwrites.\n\nHANG is emitted at the start of kgsl_postmortem_dump(), and can\nbe used by the postprocessors to stop when the hang occurs.\n\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "a7423e433ea5736234c40e0341d7451af9a8fc15", "tree": "9f6b494c60420f55dee8c03c451de4647d03a697", "parents": [ "f23a2316e6ccd335f2559b354812aad3f1b2b25b" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Mon Apr 18 15:11:21 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:26 2011 -0700" }, "message": "msm: kgsl: cffdump syncmem ioctl\n\nThis ioctl is needed to track memory writes done from userspace\nso that this data is correctly captured in the dump.\n\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "f23a2316e6ccd335f2559b354812aad3f1b2b25b", "tree": "5caa368f2149f3d0fe6261b2a3c29ffebe76bb85", "parents": [ "1079f782bf0a14cd3a11d19561d138c7ca7d3fc6" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Tue Aug 23 10:27:32 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:25 2011 -0700" }, "message": "msm: rpc: Update RPC client\u0027s cb_list_lock to use spinlocks\n\nRPC client\u0027s callback function list is sometimes accessed from\natomic context. Hence use spinlocks to get exclusive access to the\nlist rather than mutex lock.\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "1079f782bf0a14cd3a11d19561d138c7ca7d3fc6", "tree": "44b0b65e5b2d807c4faca1b0db6ad9ac84f67042", "parents": [ "90508a9750eeaf4c298537d532dfcbc1ac84b393" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Tue Aug 23 10:01:47 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:25 2011 -0700" }, "message": "msm: rpc: Reset RPC endpoint\u0027s reply bucket count during modem reset\n\nEvery RPC endpoint maintains a reference counter to represent the\nnumber of entries consumed from the reply bucket. During modem reset\nthis counter is not reset and after few modem resets this counter reaches\nthe maximum count. Hence the RPC framework stops sending out the replies.\n\nCRs-Fixed: 297292\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "90508a9750eeaf4c298537d532dfcbc1ac84b393", "tree": "c8901c92390992ba36903a8ff9a3b3f2cd1026c0", "parents": [ "d995dd85ba58065f4ea5232fecf3107221a5a37d" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Tue Aug 09 10:40:08 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:24 2011 -0700" }, "message": "board:8x60: enabling pmic8058_charger to be AC for dragonboard\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "d995dd85ba58065f4ea5232fecf3107221a5a37d", "tree": "2d38979d8edad6eaae790e23f291a446dad306d8", "parents": [ "4d09cf4a6b2f93a8b9ce468219b5dd7bb0c7549e" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Mon Aug 22 13:49:59 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:23 2011 -0700" }, "message": "msm: sdio_dmux: Fix recursive spinlock scenario\n\nFix issue where clients cannot call any functions that\nlock the channel spinlock in the callback notifications\nduring a subsystem restart.\n\nCRs-Fixed: 302014\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "4d09cf4a6b2f93a8b9ce468219b5dd7bb0c7549e", "tree": "96e2c2da0bf51d779208f6ef6ba9f8d6e131f843", "parents": [ "5dcf31ca65ed265082278245d956b28bb31e8a8a" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Wed Aug 17 17:59:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:23 2011 -0700" }, "message": "ASoC: WCD9310: Fix issues with headset detection\n\nAfter inserting and removing a headset many times during\na recording or playback, sometimes the last headset removal\nevent is not detected by the MBHC driver. This is because\nturning on the microphone bias used for MBHC can cause the\nhardware to go into an unknown state. Restarting the\nhardware state machine after enabling the microphone bias\nallows the state machine to recover.\n\nSometimes, the button release handler is triggered even\nthough there is no headset inserted. This happens because\nthe button release interrupt is not masked when the\nheadset is removed. By only unmasking the button release\ninterrupt when a headset is inserted, the button release\nhandler is only triggered when a button is actually\nreleased. The button release interrupt cannot be unmasked\nin the button press interrupt handler, because it is\nlikely that the release event could be missed due to its\ninterrupt being masked when the button was actually\nreleased. This problem causes kernel warnings due to\nunbalanced enabling of interrupts.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "5dcf31ca65ed265082278245d956b28bb31e8a8a", "tree": "5ece72ecff979fa714923f02c8c79523c6529429", "parents": [ "8afd564fade04ecc7151a5d5e9f7a58d87c66ac7" ], "author": { "name": "Jilai Wang", "email": "jilaiw@codeaurora.org", "time": "Wed Aug 24 10:08:35 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:22 2011 -0700" }, "message": "msm: camera: enable VX6953 Sensor on msm7x30 platform\n\nVX6953 sensor is disabled because of a typo in KConfig file.\nCorrect the typo to enable it.\n\nSigned-off-by: Jilai Wang \u003cjilaiw@codeaurora.org\u003e\n" }, { "commit": "8afd564fade04ecc7151a5d5e9f7a58d87c66ac7", "tree": "1d6b159dcc4df01fdd22493bccd8072a3b24b25e", "parents": [ "72407e986ccbb768b85a1d58df1c4a0d0cbbcecf" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Aug 24 15:57:06 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:22 2011 -0700" }, "message": "msm: sdio: add SDIO test for modem reset feature\n\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "72407e986ccbb768b85a1d58df1c4a0d0cbbcecf", "tree": "d282be00ac733e3fc40943f78e27653d39c8cae3", "parents": [ "4613ce4c372d594e14b8cd60af4c14ad09ab8497" ], "author": { "name": "Chuanxiao Dong", "email": "chuanxiao.dong@intel.com", "time": "Wed Aug 24 14:00:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:21 2011 -0700" }, "message": "mmc: remove MMC bus legacy suspend/resume method\n\nMMC bus suspend/resume was using legacy method. In system entering\nS3 patch, the suspend/resume function cannot be called since MMC\nbus also implemented the new suspend/resume method (dev_pm_ops struct).\nSo if dev_pm_ops is defined but .suspend/.resume callbacks not implemented,\nmmc_queue will not be suspended/resumed.\n\nThis patch will remove the legacy suspend/resume method and change to\nuse the new method totally.\n\nSigned-off-by: Chuanxiao Dong \u003cchuanxiao.dong@intel.com\u003e\nSigned-off-by: Sujith Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "4613ce4c372d594e14b8cd60af4c14ad09ab8497", "tree": "c0352047cfb2cd505e9713da8b6aecc4d0b347c8", "parents": [ "13dcf554d95c955e0110488d0a6ba604ec3db6be" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Tue Aug 23 14:39:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:21 2011 -0700" }, "message": "msm: audio: qdsp6v2: Acquire wakelocks during record.\n\nAcquire wakelocks during recording usecase to prevent apps\nproc from freezing.\n\nCRs-fixed: 303049\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "13dcf554d95c955e0110488d0a6ba604ec3db6be", "tree": "27f26ea3b81817d28b8b3cecdefac00873cd817d", "parents": [ "ab2754e472a55b271d3d47e75624835008b83a82" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Mon Aug 22 15:38:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:20 2011 -0700" }, "message": "input: cyttsp-i2c: Reduce time needed to resume from sleep\n\nReduce the number to attempts to move out of bootloader\nmode.\n\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "ab2754e472a55b271d3d47e75624835008b83a82", "tree": "5ac78d601ee5d968f7615b1bf65377127d5dba22", "parents": [ "b62d92afa8fe96510dabb97a77f6ff3775f2b154" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Aug 22 12:39:31 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:19 2011 -0700" }, "message": "input: cyttsp-i2c: Improve error handling in bootloader mode\n\nAttempt multiple I2C writes (in case of failures) to get the\ndevice out of bootloader mode.\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "b62d92afa8fe96510dabb97a77f6ff3775f2b154", "tree": "32fd3be911c3df5a7e586606ea7f021d4093fbab", "parents": [ "7887c510b7a08df535917323d7204fa219367fce" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Tue Aug 23 17:51:17 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:19 2011 -0700" }, "message": "ASoC: msm: Double packet size to support PCM WB\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "7887c510b7a08df535917323d7204fa219367fce", "tree": "91252ceb473601a4395930f5dd20cdc49eb479d4", "parents": [ "74a13cbe503db1864058962a9d4099568a1f5701" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Tue Aug 23 16:59:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:18 2011 -0700" }, "message": "platform-drivers: msm: sps: use spin_lock_irqsave for SPS driver\n\nUse spin_lock_irqsave to prevent the deadlock caused by SoftIRQ\n\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" }, { "commit": "74a13cbe503db1864058962a9d4099568a1f5701", "tree": "96bfa5dce0383849c374f16ee476e7df33abd924", "parents": [ "a11be9ee591a7271d3a94179041a612370396ff8" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Wed Aug 10 18:20:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:18 2011 -0700" }, "message": "ASoC: msm: Add mixer command to enable/disable widevoice\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "a11be9ee591a7271d3a94179041a612370396ff8", "tree": "80b3843da74053976b19b7affc59a20dc605e519", "parents": [ "cc62b1cce23459f8074f71567e9fe0f1e64c991b" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Aug 23 08:52:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:17 2011 -0700" }, "message": "regulator: pm8921-regulator: correct 100 mA LVS pull down setting\n\nThe pull down enable bit of the 100 mA LVS control register was set\nthe same way as those in LDO and SMPS regulators. I.e. set to 1 to\nenable the pull down and set to 0 to disable it. However, the pull\ndown bit meaning for 100 mA LVS\u0027s is inverted. Correct this in the\ndriver.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "cc62b1cce23459f8074f71567e9fe0f1e64c991b", "tree": "27612f8303f84f2c4d5fa7aac485b5d7a4e94da9", "parents": [ "b7f53dc2dac84df9754f46bb1249e4aed3ff46d5" ], "author": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Mon Aug 22 19:15:29 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:16 2011 -0700" }, "message": "radio:iris:Fix for regional band settings issue\n\nThis patch fixes the bug where the regional band settings were\noverwritten by default settings.\nAnd also sets proper high and low band limits\nfor Japan band.\n\nSigned-off-by: Srinivasa Rao Uppala \u003cuppalas@codeaurora.org\u003e\n" }, { "commit": "b7f53dc2dac84df9754f46bb1249e4aed3ff46d5", "tree": "65c0f22bb502b327cef8a0528b5433ef6fc38542", "parents": [ "2d31d27a3a1810d6d55991f4daea3af5812e3d90" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Tue Aug 23 12:40:33 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:16 2011 -0700" }, "message": "USB: gadget: Remove spoof disconnect workaround in ci13xxx_msm\n\nThe spoof disconnect workaround puts PHY in non-driving mode after\npull-up is disabled. Some times pull-up is not getting enabled when\nPHY is in non-driving mode. As this workaround is not applicable for\n28-nm PHY, remove it.\n\nCRs-Fixed: 302394\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" } ], "next": "2d31d27a3a1810d6d55991f4daea3af5812e3d90" }