)]}' { "log": [ { "commit": "7f2a5e214d3f8daf1e9a5ad021c74528f970e673", "tree": "b71cbcdae3d7226e771b44576f2ca49ac85c3b97", "parents": [ "a2fe81667410723d941a688e1958a49d67ca3346" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Tue Oct 11 18:08:55 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 14 14:48:14 2011 -0400" }, "message": "mac80211: Populate radiotap header with MCS info for TX frames\n\nmac80211 already filled in the MCS rate info for rx\u0027ed frames but tx\u0027ed\nframes that are sent to a monitor interface during the status callback\nlack this information.\n\nAdd the radiotap fields for MCS info to ieee80211_tx_status_rtap_hdr\nand populate them when sending tx\u0027ed frames to the monitors.\n\nThe needed headroom is only extended by one byte since we don\u0027t include\nlegacy rate information in the rtap header for HT frames.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "73b9f03a813d66484105c4ed648a1aa66fa267aa", "tree": "37a60a9c61f4537c898a5d863e93f1b445864d7d", "parents": [ "a26eb27ab430147a82e4a9f2f1ebfadf03d99550" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Oct 07 14:01:26 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 11 16:41:19 2011 -0400" }, "message": "mac80211: parse radiotap header earlier\n\nWe can now move the radiotap header parsing into\nieee80211_monitor_start_xmit(). This moves it out of\nthe hotpath, and also helps the code since now the\nradiotap header will no longer be present in\nieee80211_xmit() etc. which is easier to understand.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a26eb27ab430147a82e4a9f2f1ebfadf03d99550", "tree": "105c1b9db15ae37f4d69e22bf666861ed78a540e", "parents": [ "68f2b517bcbd81cb19321d5ca208d4c0f13b8728" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Oct 07 14:01:25 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 11 16:41:19 2011 -0400" }, "message": "mac80211: move fragment flag to info flag as dont-fragment\n\nThe purpose of this is two-fold:\n 1) by moving it out of tx_data.flags, we can in\n another patch move the radiotap parsing so it\n no longer is in the hotpath\n 2) if a device implements fragmentation but can\n optionally skip it, the radiotap request for\n not doing fragmentation may be honoured\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d6222fb0d669307a49e2a96aad86c156a9bb9551", "tree": "99c821e5823999b99e7fd49fb840d18cbb89b238", "parents": [ "76ed94be65c8bd80b565865c186dd9f24bb2f23b", "c510eae377c773241ff0b6369a8f3581da941a51" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 04 14:06:47 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 04 14:06:47 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://github.com/padovan/bluetooth-next\n" }, { "commit": "8a3a3c85e44d58f5af0adac74a0b866ba89a1978", "tree": "e64861307d417743de6992122debc99fab744124", "parents": [ "3c607d27c818cf4a5d28f2c73b18a88f8fbdfa33" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Sun Oct 02 10:15:52 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 03 15:22:41 2011 -0400" }, "message": "mac80211: pass vif param to conf_tx() callback\n\ntx params should be configured per interface.\nadd ieee80211_vif param to the conf_tx callback,\nand change all the drivers that use this callback.\n\nThe following spatch was used:\n@rule1@\nstruct ieee80211_ops ops;\nidentifier conf_tx_op;\n@@\n\tops.conf_tx \u003d conf_tx_op;\n\n@rule2@\nidentifier rule1.conf_tx_op;\nidentifier hw, queue, params;\n@@\n\tconf_tx_op (\n-\t\tstruct ieee80211_hw *hw,\n+\t\tstruct ieee80211_hw *hw, struct ieee80211_vif *vif,\n\t\tu16 queue,\n\t\tconst struct ieee80211_tx_queue_params *params) {...}\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b6f35301efda5e94342cfcca9e29b7b3e9a5f827", "tree": "f828168204f52f423a7d1b160b9f371c0fd94dc1", "parents": [ "e209c5a7ed1870ab7f112ad47083b5d616e8b6a4" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Thu Sep 29 20:34:04 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 03 15:22:32 2011 -0400" }, "message": "mac80211: Send nullfunc frames at lower rate during connection monitor\n\nRecently mac80211 was changed to use nullfunc instead of probe\nrequest for connection monitoring for tx ack status reporting\nhardwares. Sometimes in congested network, STA got disconnected\nquickly after the association. It was observered that the rate\ncontrol was not adopted to environment due to minimal transmission.\n\nAs the nullfunc are used for monitoring purpose, these frames should\nnot be sacrificed for rate control updation. So it is better to send\nthe monitoring null func frames at minimum rate that could help to\nretain the connection.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e209c5a7ed1870ab7f112ad47083b5d616e8b6a4", "tree": "e7f519c0946eca6f1c8f9a818352303e7fb25f42", "parents": [ "893d73f4a15bda966cb72f84897898eb235e134c" ], "author": { "name": "Sangwook Lee", "email": "sangwook.lee@linaro.org", "time": "Thu Sep 29 12:57:17 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 03 15:19:19 2011 -0400" }, "message": "net:rfkill: add a gpio setup function into GPIO rfkill\n\nAdd a gpio setup function which gives a chance to set up\nplatform specific configuration such as pin multiplexing,\ninput/output direction at the runtime or booting time.\n\nSigned-off-by: Sangwook Lee \u003csangwook.lee@linaro.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "893d73f4a15bda966cb72f84897898eb235e134c", "tree": "001d5b58d5c45f3d0c12a5de0bd0eb4290dd2819", "parents": [ "a5abbcb2206953eb1bf86281626363f2fd7a8ceb" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Thu Sep 29 13:42:25 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 03 15:19:17 2011 -0400" }, "message": "mac80211: Allow noack flag overwrite for injected frames\n\nAllow injected unicast frames to be sent without having to wait\nfor an ACK.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4b801bc969364a980c1366e48155d1a29d20661b", "tree": "990b0e2ba1a6387f1e4b1f9846bd0246c9c7dbe8", "parents": [ "37fbd9080088f5f98ab81a6f2ad456857971a089" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 29 16:04:40 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:24 2011 -0400" }, "message": "mac80211: document client powersave\n\nWith the addition of uAPSD and driver buffering\nthe powersave handling has gotten quite complex.\nAdd a section to the documentation to explain it\nfor anyone wanting to implement it.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "37fbd9080088f5f98ab81a6f2ad456857971a089", "tree": "ea0d90d7d05056abd662e69b096d1d0628126115", "parents": [ "40b96408831f038b1a6b45e8b22cd050f82a3896" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 29 16:04:39 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:23 2011 -0400" }, "message": "mac80211: allow out-of-band EOSP notification\n\niwlwifi has a separate EOSP notification from\nthe device, and to make use of that properly\nit needs to be passed to mac80211. To be able\nto mix with tx_status_irqsafe and rx_irqsafe\nit also needs to be an \"_irqsafe\" version in\nthe sense that it goes through the tasklet,\nthe actual flag clearing would be IRQ-safe\nbut doing it directly would cause reordering\nissues.\n\nThis is needed in the case of a P2P GO going\ninto an absence period without transmitting\nany frames that should be driver-released as\nin this case there\u0027s no other way to inform\nmac80211 that the service period ended. Note\nthat for drivers that don\u0027t use the _irqsafe\nfunctions another version of this function\nwill be required.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "40b96408831f038b1a6b45e8b22cd050f82a3896", "tree": "c8ea29b9d01ba28d484cf2d4c4a0cd576d598b79", "parents": [ "5bade101eceedb716e39bd35b2928c465e3fbd10" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 29 16:04:38 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:21 2011 -0400" }, "message": "mac80211: explicitly notify drivers of frame release\n\niwlwifi needs to know the number of frames that are\ngoing to be sent to a station while it is asleep so\nit can properly handle the uCode blocking of that\nstation.\n\nBefore uAPSD, we got by by telling the device that\na single frame was going to be released whenever we\nencountered IEEE80211_TX_CTL_POLL_RESPONSE. With\nuAPSD, however, that is no longer possible since\nthere could be more than a single frame.\n\nTo support this model, add a new callback to notify\ndrivers when frames are going to be released.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "deeaee197b0fa694ba6c8f02cdb57b3be7115b4f", "tree": "9cdd2ce5786ceb60c68327da441913b56de9726c", "parents": [ "ce662b44ce22e3e8886104d5feb2a451d7ba560f" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 29 16:04:35 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:18 2011 -0400" }, "message": "mac80211: reply only once to each PS-poll\n\nIf a PS-poll frame is retried (but was received)\nthere is no way to detect that since it has no\nsequence number. As a consequence, the standard\nasks us to not react to PS-poll frames until the\nresponse to one made it out (was ACKed or lost).\n\nImplement this by using the WLAN_STA_SP flags to\nalso indicate a PS-Poll \"service period\" and the\nIEEE80211_TX_STATUS_EOSP flag for the response\npacket to indicate the end of the \"SP\" as usual.\n\nWe could use separate flags, but that will most\nlikely completely confuse drivers, and while the\nstandard doesn\u0027t exclude simultaneously polling\nusing uAPSD and PS-Poll, doing that seems quite\nproblematic.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "47086fc51aa2220f58049704a8b73e4fcdf372b9", "tree": "31f7ae0e59318352d772b62fa26316d349cde88e", "parents": [ "4049e09acdf4ffd270cb8fbf1cf5b39c3d02357c" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 29 16:04:33 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:15 2011 -0400" }, "message": "mac80211: implement uAPSD\n\nAdd uAPSD support to mac80211. This is probably not\npossible with all devices, so advertising it with\nthe cfg80211 flag will be left up to drivers that\nwant it.\n\nDue to my previous patches it is now a fairly\nstraight-forward extension. Drivers need to have\naccurate TX status reporting for the EOSP frame.\nFor drivers that buffer themselves, the provided\nAPIs allow releasing the right number of frames,\nbut then drivers need to set EOSP and more-data\nthemselves. This is documented in more detail in\nthe new code itself.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4049e09acdf4ffd270cb8fbf1cf5b39c3d02357c", "tree": "87aa0bc08650b5cc745733fcf422dcf871caeb43", "parents": [ "8a8656fa5bbbc8568348d95184d374edb03a48b7" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 29 16:04:32 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:15 2011 -0400" }, "message": "mac80211: allow releasing driver-buffered frames\n\nIf there are frames for a station buffered in\nthe driver, mac80211 announces those in the TIM\nIE but there\u0027s no way to release them. Add new\nAPI to release such frames and use it when the\nstation polls for a frame.\n\nSince the API will soon also be used for uAPSD\nit is easily extensible.\n\nNote that before this change drivers announcing\ndriver-buffered frames in the TIM bit actually\nwill respond to a PS-Poll with a potentially\nlower priority frame (if there are any frames\nbuffered in mac80211), after this patch a driver\nthat hasn\u0027t been changed will no longer respond\nat all. This only affects ath9k, which will need\nto be fixed to implement the new API.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "948d887dec1042a7d78ae311908113e26502062f", "tree": "e4240d0f45c0200d3625693bd6d543d243859d0a", "parents": [ "60750397122fe0fb81a6e52fd790b3f749b6e010" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 29 16:04:29 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:12 2011 -0400" }, "message": "mac80211: split PS buffers into ACs\n\nFor uAPSD support we\u0027ll need to have per-AC PS\nbuffers. As this is a major undertaking, split\nthe buffers before really adding support for\nuAPSD. This already makes some reference to the\nuapsd_queues variable, but for now that will\nnever be non-zero.\n\nSince book-keeping is complicated, also change\nthe logic for keeping a maximum of frames only\nand allow 64 frames per AC (up from 128 for a\nstation).\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "042ec4533720122e6cb93dd9f3b6a75fe2fcff16", "tree": "ed8fad40c171ab54155ce316496f68d79b438b01", "parents": [ "941c93cd039852b7ab02c74f4698c99d82bd6cfe" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 29 16:04:26 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:10 2011 -0400" }, "message": "mac80211: let drivers inform it about per TID buffered frames\n\nFor uAPSD implementation, it is necessary to know on\nwhich ACs frames are buffered. mac80211 obviously\nknows about the frames it has buffered itself, but\nwith aggregation many drivers buffer frames. Thus,\nmac80211 needs to be informed about this.\n\nFor now, since we don\u0027t have APSD in any form, this\nwill unconditionally set the TIM bit for the station\nbut later with uAPSD only some ACs might cause the\nTIM bit to be set.\n\nath9k is the only driver using this API and I only\nmodify it in the most basic way, it won\u0027t be able\nto implement uAPSD with this yet. But it can\u0027t do\nthat anyway since there\u0027s no way to selectively\nrelease frames to the peer yet.\n\nSince drivers will buffer frames per TID, let them\ninform mac80211 on a per TID basis, mac80211 will\nthen sort out the AC mapping itself.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "07ba55d7f1d0da174c9bc545c713b44cee760197", "tree": "6ef39589ced179b1f76d7148652f10fc333f3349", "parents": [ "dfe018bf99537e42c816d3f543620a7e09fcf3cd" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Wed Sep 28 14:12:53 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:08 2011 -0400" }, "message": "nl80211/mac80211: allow adding TDLS peers as stations\n\nWhen adding a TDLS peer STA, mark it with a new flag in both nl80211 and\nmac80211. Before adding a peer, make sure the wiphy supports TDLS and\nour operating mode is appropriate (managed).\n\nIn addition, make sure all peers are removed on disassociation.\n\nA TDLS peer is first added just before link setup is initiated. In later\nsetup stages we have more info about peer supported rates, capabilities,\netc. This info is reported via nl80211_set_station().\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: Kalyan C Gaddam \u003cchakkal@iit.edu\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dfe018bf99537e42c816d3f543620a7e09fcf3cd", "tree": "9efb4a6d078bb1051ba9dae9342b7685943a3c48", "parents": [ "768db3438b4b48a33d073093bb364e624409cab7" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Wed Sep 28 14:12:52 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:07 2011 -0400" }, "message": "mac80211: handle TDLS high-level commands and frames\n\nRegister and implement the TDLS cfg80211 callback functions.\n\nInternally prepare and send TDLS management frames. We incorporate\nlocal STA capabilities and supported rates with extra IEs given by\nusermode. The resulting packet is either encapsulated in a data frame,\nor assembled as an action frame. It is transmitted either directly or\nthrough the AP, as mandated by the TDLS specification.\n\nDeclare support for the TDLS external setup wiphy capability. This\ntells usermode to handle link setup and discovery on its own, and use the\nkernel driver for sending TDLS mgmt packets.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: Kalyan C Gaddam \u003cchakkal@iit.edu\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "768db3438b4b48a33d073093bb364e624409cab7", "tree": "72e2d33d14484d46c16a2880df9c5d633ce7683c", "parents": [ "109086ce0b0f94760bdb0e8e2566ff8a2d673639" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Wed Sep 28 14:12:51 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:06 2011 -0400" }, "message": "mac80211: standardize adding supported rates IEs\n\nRelocate the mesh implementation of adding the (extended) supported\nrates IE to util.c, anticipating its use by other parts of mac80211.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: Kalyan C Gaddam \u003cchakkal@iit.edu\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "109086ce0b0f94760bdb0e8e2566ff8a2d673639", "tree": "217a3d18f203fe1cf8652f9b33c4ade1f61594c2", "parents": [ "a76011e2cbb6915f60488477311e0f269cee6496" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Wed Sep 28 14:12:50 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:05 2011 -0400" }, "message": "nl80211: support sending TDLS commands/frames\n\nAdd support for sending high-level TDLS commands and TDLS frames via\nNL80211_CMD_TDLS_OPER and NL80211_CMD_TDLS_MGMT, respectively. Add\nappropriate cfg80211 callbacks for lower level drivers.\n\nAdd wiphy capability flags for TDLS support and advertise them via\nnl80211.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: Kalyan C Gaddam \u003cchakkal@iit.edu\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3b9ce80ce96aeaeacab5e26442987df45584a049", "tree": "525b1ad3c3486d271877d830cc895172689cc592", "parents": [ "ffca287118d8c9a0a62e16a5ed96ff004caadeda" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Sep 27 20:56:12 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:03 2011 -0400" }, "message": "cfg80211/mac80211: apply station uAPSD parameters selectively\n\nCurrently, when hostapd sets the station as authorized\nwe also overwrite its uAPSD parameter. This obviously\nleads to buggy behaviour (later, with my patches that\nactually add uAPSD support). To fix this, only apply\nthose parameters if they were actually set in nl80211,\nand to achieve that add a bitmap of things to apply.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "84084a3197a9fdec10fa542c0df11928a784e7fc", "tree": "4da560352bb5af8418d22fc65e516004d2e666b5", "parents": [ "5b668eb3270f3f9c13ddf6e4fb57bf20c83dccff" ], "author": { "name": "Mat Martineau", "email": "mathewm@codeaurora.org", "time": "Fri Jul 22 14:54:00 2011 -0700" }, "committer": { "name": "Gustavo F. Padovan", "email": "gustavo@padovan.org", "time": "Tue Sep 27 18:16:18 2011 -0300" }, "message": "Bluetooth: Perform L2CAP SDU reassembly without copying data\n\nUse sk_buff fragment capabilities to link together incoming skbs\ninstead of allocating a new skb for reassembly and copying.\n\nThe new reassembly code works equally well for ERTM and streaming\nmode, so there is now one reassembly function instead of two.\n\nSigned-off-by: Mat Martineau \u003cmathewm@codeaurora.org\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "f70f01c2ebbe31fbd8a96be3b45c5620dac45b96", "tree": "4052a95a6ec1ab8fa51bfc1f8bae831d8aa5e592", "parents": [ "aad14ceb45f5ff12da2ab5b37a596e6f81566515" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Sun Sep 25 20:06:53 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:34:11 2011 -0400" }, "message": "cfg80211/mac80211: add netdev param to set_txq_params()\n\ntx params are currently configured per hw, although they\nshould be configured per interface.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "aad14ceb45f5ff12da2ab5b37a596e6f81566515", "tree": "898380834d260961219b687e377b60c41f5f16e9", "parents": [ "e9f935e3e8dc0bddd0df6d148165d95925422502" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Sun Sep 25 14:53:31 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:34:10 2011 -0400" }, "message": "mac80211: Send the management frame at requested rate\n\nWhenever the scan request or tx_mgmt is requesting not to\nuse CCK rate for managemet frames through\nNL80211_ATTR_TX_NO_CCK_RATE attribute, then mac80211 should\nselect appropriate least non-CCK rate. This could help to\nsend P2P probes and P2P action frames at non 11b rates\nwithout diabling 11b rates globally.\n\nCc: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e9f935e3e8dc0bddd0df6d148165d95925422502", "tree": "bbb5de5434d0dd0aa7a1b5894320b17ebee434b8", "parents": [ "8ebafde00ed0c682fed8c34ac5ba90160ea0bb30" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Sun Sep 25 14:53:30 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:34:10 2011 -0400" }, "message": "nl80211/cfg80211: Add support to disable CCK rate for management frame\n\nAdd a new nl80211 attribute to specify whether to send the management\nframes in CCK rate or not. As of now the wpa_supplicant is disabling\nCCK rate at P2P init itself. So this patch helps to send P2P probe\nrequest/probe response/action frames being sent at non CCK rate in 2GHz\nwithout disabling 11b rates.\n\nThis attribute is used with NL80211_CMD_TRIGGER_SCAN and\nNL80211_CMD_FRAME commands to disable CCK rate for management frame\ntransmission.\n\nCc: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "38f04c6b1b682f1879441e2925403ad9aff9e229", "tree": "cfd23b3e84b078049b69b81a0fe10f4442ca503f", "parents": [ "de054799b7ffee8ce1e3971a8dcd7816ccf04977" ], "author": { "name": "Ilan Elias", "email": "ilane@ti.com", "time": "Thu Sep 22 11:36:19 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:34:05 2011 -0400" }, "message": "NFC: protect nci_data_exchange transactions\n\nProtect \u0027cb\u0027 and \u0027cb_context\u0027 arguments in nci_data_exchange.\nIn fact, this implements a queue with max length of 1 data\nexchange transactions in parallel.\n\nSigned-off-by: Ilan Elias \u003cilane@ti.com\u003e\nAcked-by: Lauro Ramos Venancio \u003clauro.venancio@openbossa.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "37a41b4affa33bb237d3692bf51f1b5ebcaf29d8", "tree": "0201e166912d12bd8270b2117b11717756cfd5db", "parents": [ "129321804e36721e71fadcab5b475bd37bf53044" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Wed Sep 21 14:06:11 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:27:48 2011 -0400" }, "message": "mac80211: add ieee80211_vif param to tsf functions\n\nTSF can be kept per vif.\nAdd ieee80211_vif param to set/get/reset_tsf, and move\nthe debugfs entries to the per-vif directory.\n\nUpdate all the drivers that implement these callbacks.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5e762444b0d3e56bbd66f5092434c4a1ba698313", "tree": "ad54379252e2fa923a3001a1c194ef541a87a686", "parents": [ "c908df362c20be0eeef506fe62e13d835a4633f9" ], "author": { "name": "Antti Julku", "email": "antti.julku@nokia.com", "time": "Thu Aug 25 16:48:02 2011 +0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:59:15 2011 -0300" }, "message": "Bluetooth: Add mgmt events for blacklisting\n\nAdd management interface events for blocking/unblocking a device.\nSender of the block device command gets cmd complete and other\nmgmt sockets get the event. Event is also sent to mgmt sockets when\nblocking is done with ioctl, e.g when blocking a device with\nhciconfig. This makes it possible for bluetoothd to track status\nof blocked devices when a third party block or unblocks a device.\n\nEvent sending is handled in mgmt_device_blocked function which gets\ncalled from hci_blacklist_add in hci_core.c. A pending command is\nadded in mgmt_block_device, so that it can found when sending the\nevent - the event is not sent to the socket from which the pending\ncommand came. Locks were moved out from hci_core.c to hci_sock.c\nand mgmt.c, because locking is needed also for mgmt_pending_add in\nmgmt.c.\n\nSigned-off-by: Antti Julku \u003cantti.julku@nokia.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "8aab47574a7f5b46a4cdbc6fd820ab34e6c5dbf9", "tree": "69f31fec9ff2266d848f5e1f974928a65030c4e4", "parents": [ "1c1def09c446aae441410b70e6439ffe44dee866" ], "author": { "name": "Vinicius Costa Gomes", "email": "vinicius.gomes@openbossa.org", "time": "Mon Sep 05 14:31:31 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:12 2011 -0300" }, "message": "Bluetooth: Move SMP crypto functions to a workqueue\n\nThe function crypto_blkcipher_setkey() called by smp_e()\ncan sleep, so all the crypto work has to be moved to\nhci_dev workqueue.\n\nSigned-off-by: Vinicius Costa Gomes \u003cvinicius.gomes@openbossa.org\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "1c1def09c446aae441410b70e6439ffe44dee866", "tree": "037e722c234649ff21406cf9c3f3e79aaee2aa78", "parents": [ "142c69c6eaab26587264881bb71546e30aafdcee" ], "author": { "name": "Vinicius Costa Gomes", "email": "vinicius.gomes@openbossa.org", "time": "Mon Sep 05 14:31:30 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:12 2011 -0300" }, "message": "Bluetooth: Move SMP fields to a separate structure\n\nThe objective is to make the core to have as little as possible\ninformation about SMP procedures and logic. Now, all the SMP\nspecific information is hidden from the core.\n\nSigned-off-by: Vinicius Costa Gomes \u003cvinicius.gomes@openbossa.org\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "f6422ec624a19ba144b4b5cdbbc5ee41cc6f6400", "tree": "7b6e370bc46750718a7222b9c63f34da0072071d", "parents": [ "cfafccf730d363accacbd165542095ce6f7d2de8" ], "author": { "name": "Antti Julku", "email": "antti.julku@nokia.com", "time": "Wed Jun 22 13:11:56 2011 +0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:12 2011 -0300" }, "message": "Bluetooth: Add mgmt command for fast connectable mode\n\nAdd command to management interface for enabling/disabling the\nfast connectable mode.\n\nSigned-off-by: Antti Julku \u003cantti.julku@nokia.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "cfafccf730d363accacbd165542095ce6f7d2de8", "tree": "e01d3f94ef6a6ddb80c16f7b59b446c378183569", "parents": [ "160dc6ac1256ed15a507bec9a2ff1f6d24a5a3ff" ], "author": { "name": "Vinicius Costa Gomes", "email": "vinicius.gomes@openbossa.org", "time": "Fri Aug 19 21:06:56 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:11 2011 -0300" }, "message": "Bluetooth: Add link_type information to the mgmt Connected event\n\nOne piece of information that was lost when using the mgmt interface,\nwas the type of the connection. Using HCI events we used to know\nthe type of the connection based on the type of the event, e.g.\nHCI_LE_Connection_Complete for LE links.\n\nSigned-off-by: Vinicius Costa Gomes \u003cvinicius.gomes@openbossa.org\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "454d48ff70c24930c6b0f9cb64f290fca2dfb271", "tree": "c4972b1350ee2b4a603b043f013a26bbee9d0527", "parents": [ "d26a23454813908a1bf0e2fd8c73233b22c6dbd7" ], "author": { "name": "Vinicius Costa Gomes", "email": "vinicius.gomes@openbossa.org", "time": "Fri Aug 19 21:06:52 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:11 2011 -0300" }, "message": "Bluetooth: Use the same timeouts for both ACL and LE links\n\nSigned-off-by: Vinicius Costa Gomes \u003cvinicius.gomes@openbossa.org\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "d26a23454813908a1bf0e2fd8c73233b22c6dbd7", "tree": "20a47fdba8e49371265684bc2ed2306d7c042195", "parents": [ "e2dcd113d15ef99d23498859e7006955b5367698" ], "author": { "name": "Vinicius Costa Gomes", "email": "vinicius.gomes@openbossa.org", "time": "Fri Aug 19 21:06:51 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:11 2011 -0300" }, "message": "Bluetooth: Add a flag to indicate that SMP is going on\n\nAdd HCI_CONN_LE_SMP_PEND flag to indicate that SMP is pending\nfor that connection. This allows to have information that an SMP\nprocedure is going on for that connection.\n\nWe use the HCI_CONN_ENCRYPT_PEND to indicate that encryption\n(HCI_LE_Start_Encryption) is pending for that connection.\n\nWhile a SMP procedure is going on we hold an reference to the\nconnection, to avoid disconnections.\n\nSigned-off-by: Vinicius Costa Gomes \u003cvinicius.gomes@openbossa.org\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "52087a792c1513b85de674a4fc67fb92855474c3", "tree": "4b7bf7510a44378a5cecfcb66d22364624c2dd56", "parents": [ "da3ba88a9996cd64c6768bed5727e02da81e2c8d" ], "author": { "name": "Luiz Augusto von Dentz", "email": "luiz.von.dentz@intel.com", "time": "Wed Aug 17 16:23:00 2011 +0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:10 2011 -0300" }, "message": "Bluetooth: make use of connection number to optimize the scheduler\n\nThis checks if there is any existing connection according to its type\nbefore start iterating in the list and immediately stop iterating when\nreaching the number of connections.\n\nSigned-off-by: Luiz Augusto von Dentz \u003cluiz.von.dentz@intel.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "6a2968aaf50c7a22fced77a5e24aa636281efca8", "tree": "c3c9691da86f90d1eb13ee75e36189faad553496", "parents": [ "55eb94f9e923cba376cdf48ea5ab28d81116bead" ], "author": { "name": "Ilan Elias", "email": "ilane@ti.com", "time": "Sun Sep 18 11:19:35 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:49 2011 -0400" }, "message": "NFC: basic NCI protocol implementation\n\nThe NFC Controller Interface (NCI) is a standard\ncommunication protocol between an NFC Controller (NFCC)\nand a Device Host (DH), defined by the NFC Forum.\n\nSigned-off-by: Ilan Elias \u003cilane@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "55eb94f9e923cba376cdf48ea5ab28d81116bead", "tree": "9b70d091a80087bcc02d261b50e335c8b1cca163", "parents": [ "8b3fe7b591b3c50061a8701f8eda14033420577b" ], "author": { "name": "Ilan Elias", "email": "ilane@ti.com", "time": "Sun Sep 18 11:19:34 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:49 2011 -0400" }, "message": "NFC: move nfc.h from include/net to include/net/nfc\n\nThe file nfc.h was moved from include/net to include/net/nfc,\nsince new NFC header files will be added to include/net/nfc.\n\nSigned-off-by: Ilan Elias \u003cilane@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8b3fe7b591b3c50061a8701f8eda14033420577b", "tree": "1bdd98d750c12c6bdf6999d3f704a1f50e9db477", "parents": [ "a7ce1c9446a7f7513211e4698d07357d20452909" ], "author": { "name": "Ilan Elias", "email": "ilane@ti.com", "time": "Sun Sep 18 11:19:33 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:49 2011 -0400" }, "message": "NFC: Add dev_up and dev_down control operations\n\nAdd 2 new nfc control operations:\ndev_up to turn on the nfc device\ndev_down to turn off the nfc device\n\nSigned-off-by: Ilan Elias \u003cilane@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a7ce1c9446a7f7513211e4698d07357d20452909", "tree": "472fa017060388d6337d2e498cb492cd732a2c7b", "parents": [ "e30815016bbd0b5c3dcdc29f53e054b57938f1aa" ], "author": { "name": "Alexander Simon", "email": "an.alexsimon@googlemail.com", "time": "Sun Sep 18 00:16:45 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:48 2011 -0400" }, "message": "mac80211: fix indentation\n\nSigned-off-by: Alexander Simon \u003can.alexsimon@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4d8b61490c14a36efdee4a8bf523e26809df05ac", "tree": "e8a37cac291bb64fa3d85ac27df45f56d493f2cb", "parents": [ "c9df56b48e4ff003eaebd680ec7a45342dcd03ea", "8c23516fbb209ccf8f8c36268311c721faff29ee" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:11:55 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:11:55 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.infradead.org/users/linville/wireless\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-pci.c\n\tdrivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c\n\tdrivers/net/wireless/rt2x00/rt2800usb.c\n\tdrivers/net/wireless/wl12xx/main.c\n" }, { "commit": "c9df56b48e4ff003eaebd680ec7a45342dcd03ea", "tree": "b943ce5010290a4979a1488d791a5e6663db02a4", "parents": [ "2981808269941490f209b2db88ae021d7007b39d" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Fri Sep 16 18:56:23 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:14 2011 -0400" }, "message": "cfg80211/nl80211: Add PMKSA caching candidate event\n\nWhen the driver (or most likely firmware) decides which AP to use\nfor roaming based on internal scan result processing, user space\nneeds to be notified of PMKSA caching candidates to allow RSN\npre-authentication to be used.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3861b2c5d90b219ee772b5a1d1a32ee630564121", "tree": "695674bb297eadac2a8b4afa4c463b61b3e05800", "parents": [ "7cc44ed48d0ec0937c1f098642540b6c9ca38de5" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Sep 16 12:33:58 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:11 2011 -0400" }, "message": "bcma: cc: export more control functions\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0c28ec587a2f061b93a98ac02a53b4152cbe48f4", "tree": "fa65521de60bc77f44eee5c0314543108f856c9c", "parents": [ "6e82bc4a5bf3a1ce597324c8667baa6a2ed12604" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Thu Sep 15 11:53:01 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:49:11 2011 -0400" }, "message": "cfg80211: add cfg80211_find_vendor_ie() function\n\nAdd function to find vendor-specific ie (along with\nvendor-specific ie struct definition and P2P OUI values)\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "910868db3f114df32387a9c51a729b2645febe4d", "tree": "00b0a9df523665670cf1a28c6fbcba39ae19e9a3", "parents": [ "bd1a272806e6554c54959f2b46f6d40c182468c0" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Sun Sep 11 09:46:55 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:36:35 2011 -0400" }, "message": "nl80211/cfg80211/mac80211: fix wme docs\n\nAdd/fix some missing docs.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fd235913f9d86fde954f7e1215bd0921ee70cb19", "tree": "022206c1952bc96ac4fc85645f37cb4f7dcdca31", "parents": [ "d7d259d3a5e5975b8d0b67759f2632fbd0d508d2" ], "author": { "name": "Randy Dunlap", "email": "rdunlap@xenotime.net", "time": "Thu Sep 08 10:16:50 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 14 13:56:59 2011 -0400" }, "message": "wireless: fix kernel-doc warning in net/cfg80211.h\n\nFix kernel-doc warning in net/cfg80211.h:\n\nWarning(include/net/cfg80211.h:1884): No description found for parameter \u0027registered\u0027\n\nSigned-off-by: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2154c81c32fa44364f83218a10d8dbec4e76d4f5", "tree": "d51234e55d24c6ff5f4849d2757b57f1d6accaac", "parents": [ "4777be41638cfab56c78b2a764a5f83beb6cfdd2" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Wed Sep 07 17:49:53 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 14 13:56:50 2011 -0400" }, "message": "mac80211: Mesh data frames must have the QoS header\n\nPer sec 7.1.3.5 of draft 12.0 of 802.11s, mesh frames indicate the\npresence of the mesh control header in their QoS header.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7827493b886c307bc497a669305207f8a5b36eb2", "tree": "e7d109fc3a2e78ee4f8ff56d79704d6280dc1c22", "parents": [ "28e3181a7717b7e7934391c29e21c5302324479c" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Sun Sep 04 11:11:32 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 14 13:56:26 2011 -0400" }, "message": "mac80211: add ssid config to bss information in AP-mode\n\nSet SSID information from nl80211 beacon parameters. Advertise changes\nin SSID to low level drivers.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8c771244fbab51661da7dbbabfa5dceffb3e3cce", "tree": "10a8ac0c5fa3b05c82a614548832f2fec7d81261", "parents": [ "d7549cbb9ab0674ef44ea15bd9f9ea1c685adfa6" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Aug 20 15:53:55 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 14 13:56:16 2011 -0400" }, "message": "mac80211: make ieee80211_send_bar available for drivers\n\nTo properly maintain the peer\u0027s block ack window, the driver needs to be\nable to control the new starting sequence number that is sent along with\nthe BlockAckReq frame.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a1f1c21c181be20a8b7e073e5292ff1fe77769fa", "tree": "8b8e46d1dba26f4ef45d4e4d969cbda524d8a4c1", "parents": [ "cedb5412baeffd7326fc4869aa996d7f68d98ebb" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed Aug 31 16:01:48 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:53:45 2011 -0400" }, "message": "nl80211/cfg80211: add match filtering for sched_scan\n\nIntroduce filtering for scheduled scans to reduce the number of\nunnecessary results (which cause useless wake-ups).\n\nAdd a new nested attribute where sets of parameters to be matched can\nbe passed when starting a scheduled scan. Only scan results that\nmatch any of the sets will be returned.\n\nAt this point, the set consists of a single parameter, an SSID. This\ncan be easily extended in the future to support more complex matches.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cedb5412baeffd7326fc4869aa996d7f68d98ebb", "tree": "6b5f5c0c034e508b0bff1f7d52cf1aabde5fad3b", "parents": [ "4690c33df6be8bf78a0d5fe58baae33462b0bc1f" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Wed Aug 31 11:29:43 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:50:56 2011 -0400" }, "message": "nl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flag\n\nadd WIPHY_FLAG_AP_UAPSD flag to indicate uapsd support on\nAP mode.\n\nAdvertise it to userspace by including a new\nNL80211_ATTR_SUPPORT_AP_UAPSD attribute.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "edf6b784c0e574696915e7b04fe42158f3112d0d", "tree": "d423c979f0c87ba04891349c08d95573b43f90aa", "parents": [ "24616152b1d184864370c5ea21f8fdbd5a90d58d" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Tue Aug 30 09:32:38 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:45:03 2011 -0400" }, "message": "mac80211: add flag to indicate HW only Tx-agg setup support\n\nWhen this flag is set, Tx A-MPDU sessions will not be started by\nmac80211. This flag is required for devices that support Tx A-MPDU setup\nin hardware.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f4b34b550a5428345f3794e62de48ad5a3db3954", "tree": "50d5c3b482bd018069fdde870f0c472808156070", "parents": [ "f0425beda4d404a6e751439b562100b902ba9c98" ], "author": { "name": "Vivek Natarajan", "email": "nataraja@qca.qualcomm.com", "time": "Mon Aug 29 14:23:03 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:42:31 2011 -0400" }, "message": "cfg80211/nl80211: Indicate roaming feature capability to userspace.\n\nWhen the rssi of the current AP drops, both wpa_supplicant and the\nfirmware may do a background scan to find a better AP and try to\nassociate. Since firmware based roaming is faster, inform\nwpa_supplicant to avoid roaming and let the firmware decide to\nroam if necessary.\n\nFor fullmac drivers like ath6kl, it is just enough to provide the\nESSID and the firmware will decide on the BSSID. Since it is not\npossible to do pre-auth during roaming for fullmac drivers, the\nwpa_supplicant needs to completely disconnect with the old AP and\nreconnect with the new AP. This consumes lot of time and it is\nbetter to leave the roaming decision to the firmware.\n\nSigned-off-by: Vivek Natarajan \u003cnataraja@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e2d646ce6cc638d229b3079981d5b0c7bc95db7f", "tree": "336edd20091933392946a6360212a8594852e525", "parents": [ "39f7d33c499980267f68fcb1fadd03bdcbc9ab9a" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Sun Aug 28 18:47:22 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:42:30 2011 -0400" }, "message": "ssb: use u16 for storing board rev\n\nSpecs say about size 2 (u16) and my 14e4:4727 has board rev 0x1211.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nAcked-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4a711a8559adbf8639d445d8bf195fc929680d11", "tree": "0bdd3b69766e49f83c319a3fb203acb558d2df95", "parents": [ "817a53d9866ab4118e2dd17a9ffe80700eac40ac" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Thu Aug 25 17:07:24 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 29 15:25:29 2011 -0400" }, "message": "cfg80211: document wiphy-\u003eregistered\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dde88b736f228be8bb2a831a4c373910d0b950fa", "tree": "88c40cad2048736a7d0511cdad4f066a1597352e", "parents": [ "9533b4ac86e20656d95f25e536c81c994e5f57a6" ], "author": { "name": "Luis R. Rodriguez", "email": "mcgrof@qca.qualcomm.com", "time": "Tue Aug 23 15:03:34 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 26 10:47:56 2011 -0400" }, "message": "wireless: relicense regulatory header to ISC\n\nI will suck out stuff to userspace to start the regulatory\nrevampamp, this work will be permissively licensed.\n\nSigned-off-by: Luis R. Rodriguez \u003cmcgrof@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9533b4ac86e20656d95f25e536c81c994e5f57a6", "tree": "a536c82bddcd66c41dfee63526b9499313a4734a", "parents": [ "c75786c9ef9e726dc139325a775e90a684b00ed7" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Tue Aug 23 14:37:47 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 26 10:47:56 2011 -0400" }, "message": "mac80211: add uapsd_queues and max_sp params fields\n\nAdd uapsd_queues and max_sp fields to ieee80211_sta.\nThese fields might be needed by low-level drivers in\norder to configure the AP.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c75786c9ef9e726dc139325a775e90a684b00ed7", "tree": "90ea19402f4f63217f79410a2909c0c943851927", "parents": [ "a21fa87e3a3a8390f17f53967baa574f4e1e1e76" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Tue Aug 23 14:37:46 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 26 10:47:56 2011 -0400" }, "message": "nl80211/cfg80211: add STA WME parameters\n\nAdd new NL80211_ATTR_STA_WME nested attribute that contains\nwme params needed by the low-level driver (uapsd_queues and\nmax_sp).\n\nAdd these params to the station_parameters struct as well.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e8753043f9fbabffbf087c7f4b514c50ef89541e", "tree": "2c4b382a21500c228005a43e48134d39fdcccbe8", "parents": [ "4e0d8cc1006b889909a87f824943bad9a56358e8" ], "author": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Aug 19 15:47:11 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 24 14:41:44 2011 -0400" }, "message": "NFC: Reserve tx head and tail room\n\nWe can have the NFC core layer allocating the tx head and tail\nroom for the drivers and avoid 1 or more SKBs copy on write on\nthe Tx path.\n\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "16dd7267f460739b3e29d984e73f05c5ffe2b142", "tree": "2902dddb8d8ef045ae64bff734eb400bf8a23fb7", "parents": [ "0507e159a2b590666982b53ecf6fb2843a5bb423" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue Aug 09 16:45:11 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 24 13:59:43 2011 -0400" }, "message": "{nl,cfg,mac}80211: let userspace make meshif mesh gate\n\nAllow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute,\nwhich will advertise this mesh node as being a mesh gate.\nNL80211_HWMP_ROOTMODE must be set or this will do nothing.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0507e159a2b590666982b53ecf6fb2843a5bb423", "tree": "a5c0aefae3ea789fb1b0ef9019372e534b93aecc", "parents": [ "699403dbd41998a56d1d92d612ac261e5085a99f" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue Aug 09 16:45:10 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 24 13:59:43 2011 -0400" }, "message": "{nl,cfg,mac}80211: let userspace set RANN interval\n\nAllow userspace to set Root Announcement Interval for our mesh\ninterface. Also, RANN interval is now in proper units of TUs.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5ee68e5b39de5cefecf147c58711f8ab01c21231", "tree": "59a39c4dc5a38497aa786689552136d95c690ecf", "parents": [ "00e3f25c8556384bfec2a168c41e885fa6a7748c" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue Aug 09 16:45:08 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 24 13:59:42 2011 -0400" }, "message": "mac80211: mesh gate implementation\n\nIn this implementation, a mesh gate is a root node with a certain bit\nset in its RANN flags. The mpath to this root node is marked as a path\nto a gate, and added to our list of known gates for this if_mesh. Once a\npath discovery process fails, we forward the unresolved frames to a\nknown gate. Thanks to Luis Rodriguez for refactoring and bug fix help.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "25d49e4d63564c7004a4d6735d1d8c3cc41a7394", "tree": "c052863386c4744beb808283cc3a3ff768d417e6", "parents": [ "36c704fded53ee0d6866e8ae7f7e3d29cd4315b9" ], "author": { "name": "Thomas Pedersen", "email": "thomas@cozybit.com", "time": "Thu Aug 11 19:35:15 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 22 14:46:00 2011 -0400" }, "message": "mac80211: update mesh path selection frame format\n\nMake mesh path selection frames Mesh Action category, remove outdated\nMesh Path Selection category and defines, use updated reason codes, add\nmesh_action_is_path_sel for readability, and update/correct path\nselection IEs.\n\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "36c704fded53ee0d6866e8ae7f7e3d29cd4315b9", "tree": "3f3cc0d40633f783a2e6840a1455bd541f8a0087", "parents": [ "8db098507c5cbe499061d0f6aea426a36e7c72d7" ], "author": { "name": "Thomas Pedersen", "email": "thomas@cozybit.com", "time": "Thu Aug 11 19:35:14 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 22 14:46:00 2011 -0400" }, "message": "ieee80211: add mesh action codes\n\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8db098507c5cbe499061d0f6aea426a36e7c72d7", "tree": "bf7062fff64f56ae376cb16ffa5c3cd85c09296b", "parents": [ "54ef656b05103f700ff8fc2aaf0382cfd0e54fe4" ], "author": { "name": "Thomas Pedersen", "email": "thomas@cozybit.com", "time": "Fri Aug 12 20:01:00 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 22 14:46:00 2011 -0400" }, "message": "mac80211: update mesh peering frame format\n\nThis patch updates the mesh peering frames to the format specified in\nthe recently ratified 802.11s standard. Several changes took place to\nmake this happen:\n\n\t- Change RX path to handle new self-protected frames\n\t- Add new Peering management IE\n\t- Remove old Peer Link IE\n\t- Remove old plink_action field in ieee80211_mgmt header\n\nThese changes by themselves would either break peering, or work by\ncoincidence, so squash them all into this patch.\n\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6709a6d96e0f9b05a07999f720a15389ad242a4a", "tree": "236f73a734aef35b65a766506a26d774da600a05", "parents": [ "082ebb0c258d28af7452b19df9ef8b7553f37690" ], "author": { "name": "Thomas Pedersen", "email": "thomas@cozybit.com", "time": "Thu Aug 11 19:35:11 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 22 14:45:59 2011 -0400" }, "message": "ieee80211: introduce Self Protected Action codes\n\n802.11s introduces a new action frame category, add action codes as well\nas an entry in ieee80211_mgmt.\n\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "984e5befbafe2799be28c2209226a82fb3a3be7a", "tree": "a43f9648318a32724e5f5ed3204954f77bbdf024", "parents": [ "17030f48e31adde5b043741c91ba143f5f7db0fd" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Thu Aug 11 23:46:44 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 22 14:45:59 2011 -0400" }, "message": "bcma: implement BCM4331 workaround for external PA lines\n\nWe need to disable ext. PA lines for reading SPROM. It\u0027s disabled by\ndefault, but this patch allows using bcma after loading wl, which leaves\nworkaround enabled.\n\nCc: Arend van Spriel \u003carend@broadcom.com\u003e\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c1407b6cb22245ae8653cfc195530a9b8eb52879", "tree": "dc022758c715489691a0c4e5a927c1fa3398fd36", "parents": [ "2a190322d4390bbd5184a2fd4f97bbef9f1f5b4e" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Thu Aug 11 16:17:41 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 22 14:45:58 2011 -0400" }, "message": "wireless: Introduce defines for BAR TID_INFO \u0026 MULTI_TID fields\n\nWhile at it also fix the indention of the other IEEE80211_BAR_CTRL_ defines.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ecb4433550f0620f3d1471ae7099037ede30a91e", "tree": "d650895f78a024c45b5113cf923d7311caa74712", "parents": [ "4475a0a93f368e57d5306d4cbe9318e8c1c90c41" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Fri Aug 12 14:00:59 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 22 14:21:40 2011 -0400" }, "message": "mac80211: fix suspend/resume races with unregister hw\n\nDo not call -\u003esuspend, -\u003eresume methods after we unregister wiphy. Also\ndelete sta_clanup timer after we finish wiphy unregister to avoid this:\n\nWARNING: at lib/debugobjects.c:262 debug_print_object+0x85/0xa0()\nHardware name: 6369CTO\nODEBUG: free active (active state 0) object type: timer_list hint: sta_info_cleanup+0x0/0x180 [mac80211]\nModules linked in: aes_i586 aes_generic fuse bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq mperf ext2 dm_mod uinput thinkpad_acpi hwmon sg arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support e1000e ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom yenta_socket ahci libahci pata_acpi ata_generic ata_piix i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: microcode]\nPid: 5663, comm: pm-hibernate Not tainted 3.1.0-rc1-wl+ #19\nCall Trace:\n [\u003cc0454cfd\u003e] warn_slowpath_common+0x6d/0xa0\n [\u003cc05e05e5\u003e] ? debug_print_object+0x85/0xa0\n [\u003cc05e05e5\u003e] ? debug_print_object+0x85/0xa0\n [\u003cc0454dae\u003e] warn_slowpath_fmt+0x2e/0x30\n [\u003cc05e05e5\u003e] debug_print_object+0x85/0xa0\n [\u003cf8a808e0\u003e] ? sta_info_alloc+0x1a0/0x1a0 [mac80211]\n [\u003cc05e0bd2\u003e] debug_check_no_obj_freed+0xe2/0x180\n [\u003cc051175b\u003e] kfree+0x8b/0x150\n [\u003cf8a126ae\u003e] cfg80211_dev_free+0x7e/0x90 [cfg80211]\n [\u003cf8a13afd\u003e] wiphy_dev_release+0xd/0x10 [cfg80211]\n [\u003cc068d959\u003e] device_release+0x19/0x80\n [\u003cc05d06ba\u003e] kobject_release+0x7a/0x1c0\n [\u003cc07646a8\u003e] ? rtnl_unlock+0x8/0x10\n [\u003cf8a13adb\u003e] ? wiphy_resume+0x6b/0x80 [cfg80211]\n [\u003cc05d0640\u003e] ? kobject_del+0x30/0x30\n [\u003cc05d1a6d\u003e] kref_put+0x2d/0x60\n [\u003cc05d056d\u003e] kobject_put+0x1d/0x50\n [\u003cc08015f4\u003e] ? mutex_lock+0x14/0x40\n [\u003cc068d60f\u003e] put_device+0xf/0x20\n [\u003cc069716a\u003e] dpm_resume+0xca/0x160\n [\u003cc04912bd\u003e] hibernation_snapshot+0xcd/0x260\n [\u003cc04903df\u003e] ? freeze_processes+0x3f/0x90\n [\u003cc049151b\u003e] hibernate+0xcb/0x1e0\n [\u003cc048fdc0\u003e] ? pm_async_store+0x40/0x40\n [\u003cc048fe60\u003e] state_store+0xa0/0xb0\n [\u003cc048fdc0\u003e] ? pm_async_store+0x40/0x40\n [\u003cc05d0200\u003e] kobj_attr_store+0x20/0x30\n [\u003cc0575ea4\u003e] sysfs_write_file+0x94/0xf0\n [\u003cc051e26a\u003e] vfs_write+0x9a/0x160\n [\u003cc0575e10\u003e] ? sysfs_open_file+0x200/0x200\n [\u003cc051e3fd\u003e] sys_write+0x3d/0x70\n [\u003cc080959f\u003e] sysenter_do_call+0x12/0x28\n\nCc: stable@kernel.org\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9946ecfb510462e59afddb2a992da804d58b6bcd", "tree": "2eb7792cf6363f33f41d0532cb218ad86120f3bb", "parents": [ "5fb628e9105eef6796789b1ae93289e1566ccdf0" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Aug 10 23:55:56 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:04 2011 -0400" }, "message": "nl80211/cfg80211: Add extra IE configuration to AP mode setup\n\nThe NL80211_CMD_NEW_BEACON command is, in practice, requesting AP mode\noperations to be started. Add new attributes to provide extra IEs\n(e.g., WPS IE, P2P IE) for drivers that build Beacon, Probe Response,\nand (Re)Association Response frames internally (likely in firmware).\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5fb628e9105eef6796789b1ae93289e1566ccdf0", "tree": "3d1e9eef06be596bdd0ab936b8527202afac42e7", "parents": [ "32e9de846be885444358b67267f837088c05e0c2" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Aug 10 23:54:35 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:04 2011 -0400" }, "message": "nl80211/cfg80211: Add crypto settings into NEW_BEACON\n\nThis removes need from drivers to parse the beacon tail/head data\nto figure out what crypto settings are to be used in AP mode in case\nthe Beacon and Probe Response frames are fully constructed in the\ndriver/firmware.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "32e9de846be885444358b67267f837088c05e0c2", "tree": "181a4b23ab44337fdb72e7e0f5f1c0874154f21f", "parents": [ "0879fa44b54101c9955123582018cb511047a2b6" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Aug 10 23:53:31 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:03 2011 -0400" }, "message": "nl80211/cfg80211: Allow SSID to be specified in new beacon command\n\nThis makes it easier for drivers that generate Beacon and Probe Response\nframes internally (in firmware most likely) in AP mode.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0879fa44b54101c9955123582018cb511047a2b6", "tree": "0a9c1f5fc10a3b320d0db793598822a43b2dc719", "parents": [ "f3d4505de539f754b78d5c30e5d2cb41a0ed0117" ], "author": { "name": "Yogesh Ashok Powar", "email": "yogeshp@marvell.com", "time": "Tue Aug 09 18:02:26 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:03 2011 -0400" }, "message": "cfg80211/mac80211: move information element parsing logic to cfg80211\n\nMoving the parsing logic for retrieving the information elements\nstored in management frames, e.g. beacons or probe responses,\nand making it available to other cfg80211 drivers.\n\nSigned-off-by: Yogesh Ashok Powar \u003cyogeshp@marvell.com\u003e\nSigned-off-by: Amitkumar Karwar \u003cakarwar@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f612cedfe152b536197c0120f2e7779bc90219d0", "tree": "c1ad3b3a00a26eff4b78d81331c168faf901a4ba", "parents": [ "040bdf713d2bec8235f1af705e2d13da5d9baec8" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Thu Aug 11 11:46:22 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 11 14:23:06 2011 -0400" }, "message": "nl80211/cfg80211: Make addition of new sinfo fields safer\n\nAdd a comment pointing out the use of enum station_info_flags for\nall new struct station_info fields. In addition, memset the sinfo\nbuffer to zero before use on all paths in the current tree to avoid\nleaving uninitialized pointers in the data.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "040bdf713d2bec8235f1af705e2d13da5d9baec8", "tree": "94bf0221a212b7e88ebaccfe9c4b76f4f210bd0f", "parents": [ "6a6767b046e2d336e2af06cb605106ed44a852b6" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Aug 10 19:00:33 2011 -0600" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 11 14:23:06 2011 -0400" }, "message": "cfg80211: fix a crash in nl80211_send_station\n\nmac80211 leaves sinfo-\u003eassoc_req_ies uninitialized, causing a random\npointer memory access in nl80211_send_station.\nInstead of checking if the pointer is null, use sinfo-\u003efilled, like\nthe rest of the fields.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "50d3dfb728e987790cf3d973aaf5fba2433771d8", "tree": "2466a1545beab6417db076a977da099d7d6694c4", "parents": [ "d2da587839b29ccc5b920fffdb848d7bdb36f11f" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Mon Aug 08 12:11:52 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 10 14:07:42 2011 -0400" }, "message": "cfg80211/nl80211: Send AssocReq IEs to user space in AP mode\n\nWhen user space SME/MLME (e.g., hostapd) is not used in AP mode, the\nIEs from the (Re)Association Request frame that was processed in\nfirmware need to be made available for user space (e.g., RSN IE for\nhostapd). Allow this to be done with cfg80211_new_sta().\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9d630c77960bcd7ae36815a985039b78f24c8ba2", "tree": "0ec614c2d96dec029ab37c7716cc3fe15a3b2b8a", "parents": [ "c027ed4ceaf779388275911bb6efd507c2e87ef4" ], "author": { "name": "Pavel Roskin", "email": "proski@gnu.org", "time": "Thu Jul 28 22:50:44 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Aug 09 15:42:36 2011 -0400" }, "message": "lib80211: remove exports for functions not called by other modules\n\nSigned-off-by: Pavel Roskin \u003cproski@gnu.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "454496fd05b1463efa46ec7a42576e3d319cc291", "tree": "695c186e173bfb21fb77a820a130b117c67bde3e", "parents": [ "f749b94679c71a9c74ad9509dbbf00d8f3d620ad" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Sat Jul 23 11:10:11 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Aug 09 15:38:57 2011 -0400" }, "message": "ssb: define boardflags\n\nThey are SPROM specific, so all should be defined in ssb code.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3ed8c26352bcddd8e09baba673a48a84daa359ee", "tree": "98dd748ecf650b574c7c32c9820be7081a05c129", "parents": [ "ea7a03cff3f500acecf363ef9168bb1df6f79cf6" ], "author": { "name": "Pavel Roskin", "email": "proski@gnu.org", "time": "Tue Jul 26 18:52:35 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 16:04:11 2011 -0400" }, "message": "pcmcia: add PCMCIA_DEVICE_MANF_CARD_PROD_ID3\n\nThis is needed to match wireless cards with Intersil firmware that have\nID 0x0156:0x0002 and the third ID \"Version 01.02\". Such cards are\ncurrently matched by orinoco_cs, which doesn\u0027t support WPA. They should\nbe matched by hostap_cs.\n\nThe first and the second product ID vary widely, so there are few users\nwith some particular IDs. Of those, very few can submit a patch for\nhostap_cs or write a useful bugreport. It\u0027s still important to support\ntheir hardware properly.\n\nWith PCMCIA_DEVICE_MANF_CARD_PROD_ID3, it should be possible to cover\nthe remaining Intersil based designs that kept the numeric ID and the\n\"version\" of the reference design.\n\nSigned-off-by: Pavel Roskin \u003cproski@gnu.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b4ca6084a84d50c5b0986adff7fdf8244b84fe39", "tree": "4006e312678e864119ffbcc5bc51562ecabd7583", "parents": [ "c6baf7fb40cb141c4b510372f7dac829621ccf3f" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Sat Jul 23 10:24:48 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 16:04:05 2011 -0400" }, "message": "mac80211: remove offchannel_tx API\n\nFor iwlwifi, I decided not to use this API since\nit just increased the complexity for little gain.\nSince nobody else intends to use it, let\u0027s kill\nit again. If anybody later needs to have it, we\ncan always revive it then.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "908debc8da0d5a91418f71c6a462f62bd2ac69ef", "tree": "886072e213b3a67650a53574be916ec105d15b61", "parents": [ "e3afe0e5be7576ac1282ea9fbbc9b352bb379227" ], "author": { "name": "Hauke Mehrtens", "email": "hauke@hauke-m.de", "time": "Sat Jul 23 01:20:11 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 14:29:29 2011 -0400" }, "message": "bcma: get CPU clock\n\nAdd method to return the clock of the CPU. This is needed by the arch\ncode to calculate the mips_hpt_frequency.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e3afe0e5be7576ac1282ea9fbbc9b352bb379227", "tree": "0b74e8bd5e45b2d50f9fa2033674a00aeac5f6ae", "parents": [ "21e0534ad7415559bb8dee0dc00e39646fed83c9" ], "author": { "name": "Hauke Mehrtens", "email": "hauke@hauke-m.de", "time": "Sat Jul 23 01:20:10 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 14:29:28 2011 -0400" }, "message": "bcma: add serial console support\n\nThis adds support for serial console to bcma, when operating on an SoC.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "21e0534ad7415559bb8dee0dc00e39646fed83c9", "tree": "e9e082dfdf6ce9798d6201f1ae4109b68b11920a", "parents": [ "ecd177c21640e92b059a71139f5850243a8f0942" ], "author": { "name": "Hauke Mehrtens", "email": "hauke@hauke-m.de", "time": "Sat Jul 23 01:20:09 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 14:29:26 2011 -0400" }, "message": "bcma: add mips driver\n\nThis adds a mips driver to bcma. This is only found on embedded\ndevices. For now the driver just initializes the irqs used on this\nsystem.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ecd177c21640e92b059a71139f5850243a8f0942", "tree": "70ed92f7b63087bec0a6036dca1c81403d65c86d", "parents": [ "517f43e5a922d51ac960424de4f72676fe6a7390" ], "author": { "name": "Hauke Mehrtens", "email": "hauke@hauke-m.de", "time": "Sat Jul 23 01:20:08 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 14:29:25 2011 -0400" }, "message": "bcma: add SOC bus\n\nThis patch adds support for using bcma on a Broadcom SoC as the system\nbus. An SoC like the bcm4716 could register this bus and use it to\nsearches for the bcma cores and register the devices on this bus.\n\nBCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC\nis a better name.\n\nAcked-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "517f43e5a922d51ac960424de4f72676fe6a7390", "tree": "02920911d43c4e480ac0eba21c15587776b16d6b", "parents": [ "67a5c29e1623edda5ff3f0355af533e72a245ad9" ], "author": { "name": "Hauke Mehrtens", "email": "hauke@hauke-m.de", "time": "Sat Jul 23 01:20:07 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 14:29:24 2011 -0400" }, "message": "bcma: add functions to scan cores needed on SoCs\n\nThe chip common and mips core have to be setup early in the boot\nprocess to get the cpu clock.\nbcma_bus_early_register() gets pointers to some space to store the core\ndata and searches for the chip common and mips core and initializes\nchip common. After that was done and the kernel is out of early boot we\njust have to run bcma_bus_register() and it will search for the other\ncores, initialize and register them.\nThe cores are getting the same numbers as before.\n\nAcked-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "04b0c5c6995103eef56391c163e970ab1f03b59f", "tree": "252c64fa6c6bcfc7b42fe014b0f4bf2bd80ad0e8", "parents": [ "67a50035b3f9335b9e5800c32149173e797b9cc0" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Jul 15 13:01:38 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 14:26:29 2011 -0400" }, "message": "cfg80211: remove unused wext handler exports\n\nA lot of code is dedicated to giving drivers the\nability to use cfg80211\u0027s wext handlers without\ncompletely converting. However, only orinoco is\ncurrently using this, and it is only partially\nusing it.\n\nWe reduce the size of both the source and binary\nby removing those that nobody needs. If a driver\nshows up that needs it during conversion, we can\nadd back those that are needed.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7c966a6de5be35737038cd71be7a3e36470aa52f", "tree": "251ec899fb6b848fc99a5f7963a3551d648341c6", "parents": [ "bb9b08af06fd6afa6fc77068a81a8ef8b167cdc3" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Jul 13 10:39:19 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 14:26:27 2011 -0400" }, "message": "mac80211: remove linux/wireless.h inclusion\n\nlinux/wireless.h is for wireless extensions only, so\nmac80211 shouldn\u0027t include it since it uses cfg80211.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "262eb9b2237ecee047451a636e799ea1572b685a", "tree": "162ce4b4f27edf7cdf45bb3e3574d840db2815e1", "parents": [ "a5d5a914770a81a1f775be2ee35b9fa8fd19d381" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Jul 13 10:39:09 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 08 14:24:59 2011 -0400" }, "message": "cfg80211: split wext compatibility to separate header\n\nA lot of drivers erroneously use wext constants\nand don\u0027t notice since cfg80211.h includes them.\nMake this more split up so drivers needing wext\ncompatibility from cfg80211 need to explicitly\ninclude that from cfg80211-wext.h.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d5eab9152a3b4ce962c02ad0a0e4d0ec94aadd92", "tree": "3147f8de2805da0f026ea18103a9be46f3bc2a18", "parents": [ "6140333d3656f62ac7e6a5af87e7fe92cfb8d655", "a051294423b015c5c89f2ed78f7fe0893b775098" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jul 28 05:58:19 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jul 28 05:58:19 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits)\n tg3: Remove 5719 jumbo frames and TSO blocks\n tg3: Break larger frags into 4k chunks for 5719\n tg3: Add tx BD budgeting code\n tg3: Consolidate code that calls tg3_tx_set_bd()\n tg3: Add partial fragment unmapping code\n tg3: Generalize tg3_skb_error_unmap()\n tg3: Remove short DMA check for 1st fragment\n tg3: Simplify tx bd assignments\n tg3: Reintroduce tg3_tx_ring_info\n ASIX: Use only 11 bits of header for data size\n ASIX: Simplify condition in rx_fixup()\n Fix cdc-phonet build\n bonding: reduce noise during init\n bonding: fix string comparison errors\n net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared\n net: add IFF_SKB_TX_SHARED flag to priv_flags\n net: sock_sendmsg_nosec() is static\n forcedeth: fix vlans\n gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e\n gro: Only reset frag0 when skb can be pulled\n ...\n" }, { "commit": "6140333d3656f62ac7e6a5af87e7fe92cfb8d655", "tree": "d96f7ad2196b4383f5ca4396c956e24c82b2952c", "parents": [ "6f56c218666b5c7eff354364357307d18c10058b", "58c54fcca3bac5bf9290cfed31c76e4c4bfbabaf" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jul 28 05:50:27 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jul 28 05:50:27 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://neil.brown.name/md\n\n* \u0027for-linus\u0027 of git://neil.brown.name/md: (75 commits)\n md/raid10: handle further errors during fix_read_error better.\n md/raid10: Handle read errors during recovery better.\n md/raid10: simplify read error handling during recovery.\n md/raid10: record bad blocks due to write errors during resync/recovery.\n md/raid10: attempt to fix read errors during resync/check\n md/raid10: Handle write errors by updating badblock log.\n md/raid10: clear bad-block record when write succeeds.\n md/raid10: avoid writing to known bad blocks on known bad drives.\n md/raid10 record bad blocks as needed during recovery.\n md/raid10: avoid reading known bad blocks during resync/recovery.\n md/raid10 - avoid reading from known bad blocks - part 3\n md/raid10: avoid reading from known bad blocks - part 2\n md/raid10: avoid reading from known bad blocks - part 1\n md/raid10: Split handle_read_error out from raid10d.\n md/raid10: simplify/reindent some loops.\n md/raid5: Clear bad blocks on successful write.\n md/raid5. Don\u0027t write to known bad block on doubtful devices.\n md/raid5: write errors should be recorded as bad blocks if possible.\n md/raid5: use bad-block log to improve handling of uncorrectable read errors.\n md/raid5: avoid reading from known bad blocks.\n ...\n" }, { "commit": "d8873315065f1f527c7c380402cf59b1e1d0ae36", "tree": "41a9c15f75b41657dd5370fe135f16c40b3eab64", "parents": [ "894dc24ce75aa238ce96422a36b1537ccf2d8831" ], "author": { "name": "Neil Horman", "email": "nhorman@tuxdriver.com", "time": "Tue Jul 26 06:05:37 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Jul 27 22:39:30 2011 -0700" }, "message": "net: add IFF_SKB_TX_SHARED flag to priv_flags\n\nPktgen attempts to transmit shared skbs to net devices, which can\u0027t be used by\nsome drivers as they keep state information in skbs. This patch adds a flag\nmarking drivers as being able to handle shared skbs in their tx path. Drivers\nare defaulted to being unable to do so, but calling ether_setup enables this\nflag, as 90% of the drivers calling ether_setup touch real hardware and can\nhandle shared skbs. A subsequent patch will audit drivers to ensure that the\nflag is set properly\n\nSigned-off-by: Neil Horman \u003cnhorman@tuxdriver.com\u003e\nReported-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\nCC: Robert Olsson \u003crobert.olsson@its.uu.se\u003e\nCC: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nCC: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nCC: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "95b6886526bb510b8370b625a49bc0ab3b8ff10f", "tree": "2862606224820d200be12d2092dcd26df1654b80", "parents": [ "22712200e175e0df5c7f9edfe6c6bf5c94c23b83", "29412f0f6a19e34336368f13eab848091c343952" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 19:26:38 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 19:26:38 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits)\n tpm_nsc: Fix bug when loading multiple TPM drivers\n tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block\n tpm: Fix compilation warning when CONFIG_PNP is not defined\n TOMOYO: Update kernel-doc.\n tpm: Fix a typo\n tpm_tis: Probing function for Intel iTPM bug\n tpm_tis: Fix the probing for interrupts\n tpm_tis: Delay ACPI S3 suspend while the TPM is busy\n tpm_tis: Re-enable interrupts upon (S3) resume\n tpm: Fix display of data in pubek sysfs entry\n tpm_tis: Add timeouts sysfs entry\n tpm: Adjust interface timeouts if they are too small\n tpm: Use interface timeouts returned from the TPM\n tpm_tis: Introduce durations sysfs entry\n tpm: Adjust the durations if they are too small\n tpm: Use durations returned from TPM\n TOMOYO: Enable conditional ACL.\n TOMOYO: Allow using argv[]/envp[] of execve() as conditions.\n TOMOYO: Allow using executable\u0027s realpath and symlink\u0027s target as conditions.\n TOMOYO: Allow using owner/group etc. of file objects as conditions.\n ...\n\nFix up trivial conflict in security/tomoyo/realpath.c\n" }, { "commit": "2699b67223aca6b1450fc2f72e40fada952afc85", "tree": "c84d0cbb763ad03cd770a218a37f0f1ec31118af", "parents": [ "34b343cff4354ab9864be83be88405fd53d928a0" ], "author": { "name": "NeilBrown", "email": "neilb@suse.de", "time": "Thu Jul 28 11:31:47 2011 +1000" }, "committer": { "name": "NeilBrown", "email": "neilb@suse.de", "time": "Thu Jul 28 11:31:47 2011 +1000" }, "message": "md: load/store badblock list from v1.x metadata\n\nSpace must have been allocated when array was created.\nA feature flag is set when the badblock list is non-empty, to\nensure old kernels don\u0027t load and trust the whole device.\n\nWe only update the on-disk badblocklist when it has changed.\nIf the badblocklist (or other metadata) is stored on a bad block, we\ndon\u0027t cope very well.\n\nIf metadata has no room for bad block, flag bad-blocks as disabled,\nand do the same for 0.90 metadata.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n" }, { "commit": "28890d3598c352ae065b560e0fded3e79c800ba1", "tree": "93267c5b29b9e81185e66a6c2e70e67dc626b63f", "parents": [ "91d41fdf31f74e6e2e5f3cb018eca4200e36e202", "ed1e6211a0a134ff23592c6f057af982ad5dab52" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 13:23:02 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 13:23:02 2011 -0700" }, "message": "Merge branch \u0027nfs-for-3.1\u0027 of git://git.linux-nfs.org/projects/trondmy/linux-nfs\n\n* \u0027nfs-for-3.1\u0027 of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (44 commits)\n NFSv4: Don\u0027t use the delegation-\u003einode in nfs_mark_return_delegation()\n nfs: don\u0027t use d_move in nfs_async_rename_done\n RDMA: Increasing RPCRDMA_MAX_DATA_SEGS\n SUNRPC: Replace xprt-\u003eresend and xprt-\u003esending with a priority queue\n SUNRPC: Allow caller of rpc_sleep_on() to select priority levels\n SUNRPC: Support dynamic slot allocation for TCP connections\n SUNRPC: Clean up the slot table allocation\n SUNRPC: Initalise the struct xprt upon allocation\n SUNRPC: Ensure that we grab the XPRT_LOCK before calling xprt_alloc_slot\n pnfs: simplify pnfs files module autoloading\n nfs: document nfsv4 sillyrename issues\n NFS: Convert nfs4_set_ds_client to EXPORT_SYMBOL_GPL\n SUNRPC: Convert the backchannel exports to EXPORT_SYMBOL_GPL\n SUNRPC: sunrpc should not explicitly depend on NFS config options\n NFS: Clean up - simplify the switch to read/write-through-MDS\n NFS: Move the pnfs write code into pnfs.c\n NFS: Move the pnfs read code into pnfs.c\n NFS: Allow the nfs_pageio_descriptor to signal that a re-coalesce is needed\n NFS: Use the nfs_pageio_descriptor-\u003epg_bsize in the read/write request\n NFS: Cache rpc_ops in struct nfs_pageio_descriptor\n ...\n" }, { "commit": "91d41fdf31f74e6e2e5f3cb018eca4200e36e202", "tree": "81ef11f06bd8047031a2d93706dc263fa1bacd56", "parents": [ "c1095c6da518b0b64e724f629051fa67655cd8d9", "277c5f27a2c86a9a733c0ec0f6a9b1032dfa3e15" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 13:21:40 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 13:21:40 2011 -0700" }, "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:\n target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectors\n kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usage\n iscsi-target: Add iSCSI fabric support for target v4.1\n iscsi: Add Serial Number Arithmetic LT and GT into iscsi_proto.h\n iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]\n iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsi\n" }, { "commit": "09570f914914d2beb0db29c5a9c7344934f2fa8c", "tree": "a93900db5e607887aca3ef2cecc2426abe007d87", "parents": [ "5fd00b031530cc476240f654c078c930f1dcd6ea" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Wed Jul 27 21:47:03 2011 +0300" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 12:50:45 2011 -0700" }, "message": "proc: make struct proc_dir_entry::name a terminal array rather than a pointer\n\nSince __proc_create() appends the name it is given to the end of the PDE\nstructure that it allocates, there isn\u0027t a need to store a name pointer.\nInstead we can just replace the name pointer with a terminal char array of\n_unspecified_ length. The compiler will simply append the string to statically\ndefined variables of PDE type overlapping any hole at the end of the structure\nand, unlike specifying an explicitly _zero_ length array, won\u0027t give a warning\nif you try to statically initialise it with a string of more than zero length.\n\nAlso, whilst we\u0027re at it:\n\n (1) Move namelen to end just prior to name and reduce it to a single byte\n (name shouldn\u0027t be longer than NAME_MAX).\n\n (2) Move pde_unload_lock two places further on so that if it\u0027s four bytes in\n size on a 64-bit machine, it won\u0027t cause an unused hole in the PDE struct.\n\nSigned-off-by: David Howells \u003cdhowells@redhat.com\u003e\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "75623437167d9d1ef14acaf6b3fb4ccd38fcbc84", "tree": "b7136121995cc6c2b5211a5393b1ad7c179a2f3b", "parents": [ "70a3eff5768350c0313a9ae70a15da113171d0ab", "636f78581dbd5529a52057973fe2bdfc1c2f528e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 09:25:15 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 09:25:15 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (22 commits)\n ALSA: hda - Cirrus Logic CS421x support\n ALSA: Make pcm.h self-contained\n ALSA: hda - Allow codec-specific set_power_state ops\n ALSA: hda - Add post_suspend patch ops\n ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PM\n ALSA: hda - Make sure mute led reflects master mute state\n ALSA: hda - Fix invalid mute led state on resume of IDT codecs\n ASoC: Revert \"ASoC: SAMSUNG: Add I2S0 internal dma driver\"\n ALSA: hda - Add support of the 4 internal speakers on certain HP laptops\n ALSA: Make snd_pcm_debug_name usable outside pcm_lib\n ALSA: hda - Fix DAC filling for multi-connection pins in Realtek parser\n ASoC: dapm - Add methods to retrieve snd_card and soc_card from dapm context.\n ASoC: SAMSUNG: Add I2S0 internal dma driver\n ASoC: SAMSUNG: Modify I2S driver to support idma\n ASoC: davinci: add missing break statement\n ASoC: davinci: fix codec start and stop functions\n ASoC: dapm - add DAPM macro for external enum widgets\n ASoC: Acknowledge WM8962 interrupts before acting on them\n ASoC: sgtl5000: guide user when regulator support is needed\n ASoC: sgtl5000: refactor registering internal ldo\n ...\n" }, { "commit": "70a3eff5768350c0313a9ae70a15da113171d0ab", "tree": "9c2558f92e567bcb35c79f59bc7ebc9cf6fdc9d3", "parents": [ "9ed3689bdceb0064ee6faf0e76f6467122794970", "aa7eb8e78d8ecd6cd0475d86ea8385ff9cb47ece" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 09:24:56 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 27 09:24:56 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)\n Input: synaptics - fix reporting of min coordinates\n Input: tegra-kbc - enable key autorepeat\n Input: kxtj9 - fix locking typo in kxtj9_set_poll()\n Input: kxtj9 - fix bug in probe()\n Input: intel-mid-touch - remove pointless checking for variable \u0027found\u0027\n Input: hp_sdc - staticize hp_sdc_kicker()\n Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure\n Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data\n Input: cy8ctmg110_ts - constify i2c_device_id table\n Input: cy8ctmg110_ts - fix checking return value of i2c_master_send\n Input: lifebook - make dmi callback functions return 1\n Input: atkbd - make dmi callback functions return 1\n Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS\n Input: gpio_keys - add support for device-tree platform data\n Input: aiptek - remove double define\n Input: synaptics - set minimum coordinates as reported by firmware\n Input: synaptics - process button bits in AGM packets\n Input: synaptics - rename set_slot to be more descriptive\n Input: synaptics - fuzz position for touchpad with reduced filtering\n Input: synaptics - set resolution for MT_POSITION_X/Y axes\n ...\n" }, { "commit": "17dd759c67f21e34f2156abcf415e1f60605a188", "tree": "991e4406ec835cf4cbb8108a6307c35f3164007b", "parents": [ "2d348d1f569f051d2609b04d27bb55cd25eda8fe" ], "author": { "name": "Herbert Xu", "email": "herbert@gondor.apana.org.au", "time": "Wed Jul 27 06:16:28 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Jul 27 06:16:28 2011 -0700" }, "message": "gro: Only reset frag0 when skb can be pulled\n\nCurrently skb_gro_header_slow unconditionally resets frag0 and\nfrag0_len. However, when we can\u0027t pull on the skb this leaves\nthe GRO fields in an inconsistent state.\n\nThis patch fixes this by only resetting those fields after the\npskb_may_pull test.\n\nSigned-off-by: Herbert Xu \u003cherbert@gondor.apana.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e371d46ae45488bcb112a99a7de462e9e3aa6764", "tree": "9e2eceb292018e52304053bd8013cdb0a7f31dcc", "parents": [ "b0189cd087aa82bd23277cb5c8960ab030e13e5c", "e57712ebebbb9db7d8dcef216437b3171ddcf115" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 26 18:30:20 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 26 18:30:20 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:\n merge fchmod() and fchmodat() guts, kill ancient broken kludge\n xfs: fix misspelled S_IS...()\n xfs: get rid of open-coded S_ISREG(), etc.\n vfs: document locking requirements for d_move, __d_move and d_materialise_unique\n omfs: fix (mode \u0026 S_IFDIR) abuse\n btrfs: S_ISREG(mode) is not mode \u0026 S_IFREG...\n ima: fmode_t misspelled as mode_t...\n pci-label.c: size_t misspelled as mode_t\n jffs2: S_ISLNK(mode \u0026 S_IFMT) is pointless\n snd_msnd -\u003emode is fmode_t, not mode_t\n v9fs_iop_get_acl: get rid of unused variable\n vfs: dont chain pipe/anon/socket on superblock s_inodes list\n Documentation: Exporting: update description of d_splice_alias\n fs: add missing unlock in default_llseek()\n" }, { "commit": "b0189cd087aa82bd23277cb5c8960ab030e13e5c", "tree": "7b1a4c152cd62ce136fd5b0e4379d58eb2244e66", "parents": [ "69f1d1a6acbaa7d83ef3f4ee26209c58cd000204", "bc574e190d3fbed37d724e33a16aee326d6f2ac4" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 26 17:42:18 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 26 17:42:18 2011 -0700" }, "message": "Merge branch \u0027next/devel2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc\n\n* \u0027next/devel2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits)\n OMAP: Add debugfs node to show the summary of all clocks\n OMAP2+: hwmod: Follow the recommended PRCM module enable sequence\n OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code\n OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming\n OMAP2+: PM: idle clkdms only if already in idle\n OMAP2+: clockdomain: add clkdm_in_hwsup()\n OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework\n OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition()\n OMAP4: hwmod: Introduce the module control in hwmod control\n OMAP4: cm: Add two new APIs for modulemode control\n OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure\n OMAP4: hwmod data: Add PRM context register offset\n OMAP4: prm: Remove deprecated functions\n OMAP4: prm: Replace warm reset API with the offset based version\n OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros\n OMAP: hwmod: Wait the idle status to be disabled\n OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros\n OMAP2+: hwmod: Init clkdm field at boot time\n OMAP4: hwmod data: Add clock domain attribute\n OMAP4: clock data: Add missing divider selection for auxclks\n ...\n" } ], "next": "3960ef326a1838971466193ffa008ff37c1d978d" }