)]}'
{
  "log": [
    {
      "commit": "4bf56e1725a298fb430977cf143ad3a36c91b46a",
      "tree": "fb5137da1813d76b660a91c015e8a1cf5f7a38f3",
      "parents": [
        "621023072524fc0155ed16490255e1ea3aa11585"
      ],
      "author": {
        "name": "Stephen Rothwell",
        "email": "sfr@canb.auug.org.au",
        "time": "Tue Apr 24 13:48:41 2007 +1000"
      },
      "committer": {
        "name": "Paul Mackerras",
        "email": "paulus@samba.org",
        "time": "Tue Apr 24 22:08:57 2007 +1000"
      },
      "message": "[POWERPC] Remove find_compatible_devices\n\nThis is an old interface and is replaced by of_find_compatible_node.\n\nSigned-off-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n"
    },
    {
      "commit": "cd354f1ae75e6466a7e31b727faede57a1f89ca5",
      "tree": "09a2da1672465fefbc7fe06ff4e6084f1dd14c6b",
      "parents": [
        "3fc605a2aa38899c12180ca311f1eeb61a6d867e"
      ],
      "author": {
        "name": "Tim Schmielau",
        "email": "tim@physik3.uni-rostock.de",
        "time": "Wed Feb 14 00:33:14 2007 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@woody.linux-foundation.org",
        "time": "Wed Feb 14 08:09:54 2007 -0800"
      },
      "message": "[PATCH] remove many unneeded #includes of sched.h\n\nAfter Al Viro (finally) succeeded in removing the sched.h #include in module.h\nrecently, it makes sense again to remove other superfluous sched.h includes.\nThere are quite a lot of files which include it but don\u0027t actually need\nanything defined in there.  Presumably these includes were once needed for\nmacros that used to live in sched.h, but moved to other header files in the\ncourse of cleaning it up.\n\nTo ease the pain, this time I did not fiddle with any header files and only\nremoved #includes from .c-files, which tend to cause less trouble.\n\nCompile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,\narm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,\nallmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all\nconfigs in arch/arm/configs on arm.  I also checked that no new warnings were\nintroduced by the patch (actually, some warnings are removed that were emitted\nby unnecessarily included header files).\n\nSigned-off-by: Tim Schmielau \u003ctim@physik3.uni-rostock.de\u003e\nAcked-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "9da3b1ad7b074effd56729f9fc01cc5abf6503cc",
      "tree": "3baee72cc871c647f7e2ee84d6599ad185a0c482",
      "parents": [
        "28431146993e0ab3a2a592af8541543fe0cc2c8e"
      ],
      "author": {
        "name": "Al Viro",
        "email": "viro@ftp.linux.org.uk",
        "time": "Sun Oct 08 15:00:44 2006 +0100"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Sun Oct 08 12:32:36 2006 -0700"
      },
      "message": "[PATCH] misc ppc pt_regs fixes\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "7d12e780e003f93433d49ce78cfedf4b4c52adc5",
      "tree": "6748550400445c11a306b132009f3001e3525df8",
      "parents": [
        "da482792a6d1a3fbaaa25fae867b343fb4db3246"
      ],
      "author": {
        "name": "David Howells",
        "email": "dhowells@redhat.com",
        "time": "Thu Oct 05 14:55:46 2006 +0100"
      },
      "committer": {
        "name": "David Howells",
        "email": "dhowells@warthog.cambridge.redhat.com",
        "time": "Thu Oct 05 15:10:12 2006 +0100"
      },
      "message": "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers\n\nMaintain a per-CPU global \"struct pt_regs *\" variable which can be used instead\nof passing regs around manually through all ~1800 interrupt handlers in the\nLinux kernel.\n\nThe regs pointer is used in few places, but it potentially costs both stack\nspace and code to pass it around.  On the FRV arch, removing the regs parameter\nfrom all the genirq function results in a 20% speed up of the IRQ exit path\n(ie: from leaving timer_interrupt() to leaving do_IRQ()).\n\nWhere appropriate, an arch may override the generic storage facility and do\nsomething different with the variable.  On FRV, for instance, the address is\nmaintained in GR28 at all times inside the kernel as part of general exception\nhandling.\n\nHaving looked over the code, it appears that the parameter may be handed down\nthrough up to twenty or so layers of functions.  Consider a USB character\ndevice attached to a USB hub, attached to a USB controller that posts its\ninterrupts through a cascaded auxiliary interrupt controller.  A character\ndevice driver may want to pass regs to the sysrq handler through the input\nlayer which adds another few layers of parameter passing.\n\nI\u0027ve build this code with allyesconfig for x86_64 and i386.  I\u0027ve runtested the\nmain part of the code on FRV and i386, though I can\u0027t test most of the drivers.\nI\u0027ve also done partial conversion for powerpc and MIPS - these at least compile\nwith minimal configurations.\n\nThis will affect all archs.  Mostly the changes should be relatively easy.\nTake do_IRQ(), store the regs pointer at the beginning, saving the old one:\n\n\tstruct pt_regs *old_regs \u003d set_irq_regs(regs);\n\nAnd put the old one back at the end:\n\n\tset_irq_regs(old_regs);\n\nDon\u0027t pass regs through to generic_handle_irq() or __do_IRQ().\n\nIn timer_interrupt(), this sort of change will be necessary:\n\n\t-\tupdate_process_times(user_mode(regs));\n\t-\tprofile_tick(CPU_PROFILING, regs);\n\t+\tupdate_process_times(user_mode(get_irq_regs()));\n\t+\tprofile_tick(CPU_PROFILING);\n\nI\u0027d like to move update_process_times()\u0027s use of get_irq_regs() into itself,\nexcept that i386, alone of the archs, uses something other than user_mode().\n\nSome notes on the interrupt handling in the drivers:\n\n (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in\n     the input_dev struct.\n\n (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does\n     something different depending on whether it\u0027s been supplied with a regs\n     pointer or not.\n\n (*) Various IRQ handler function pointers have been moved to type\n     irq_handler_t.\n\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\n(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)\n"
    },
    {
      "commit": "0ebfff1491ef85d41ddf9c633834838be144f69f",
      "tree": "5b469a6d61a9fcfbf94e7b6d411e544dbdec8dec",
      "parents": [
        "f63e115fb50db39706b955b81e3375ef6bab2268"
      ],
      "author": {
        "name": "Benjamin Herrenschmidt",
        "email": "benh@kernel.crashing.org",
        "time": "Mon Jul 03 21:36:01 2006 +1000"
      },
      "committer": {
        "name": "Paul Mackerras",
        "email": "paulus@samba.org",
        "time": "Mon Jul 03 21:36:01 2006 +1000"
      },
      "message": "[POWERPC] Add new interrupt mapping core and change platforms to use it\n\nThis adds the new irq remapper core and removes the old one.  Because\nthere are some fundamental conflicts with the old code, like the value\nof NO_IRQ which I\u0027m now setting to 0 (as per discussions with Linus),\netc..., this commit also changes the relevant platform and driver code\nover to use the new remapper (so as not to cause difficulties later\nin bisecting).\n\nThis patch removes the old pre-parsing of the open firmware interrupt\ntree along with all the bogus assumptions it made to try to renumber\ninterrupts according to the platform. This is all to be handled by the\nnew code now.\n\nFor the pSeries XICS interrupt controller, a single remapper host is\ncreated for the whole machine regardless of how many interrupt\npresentation and source controllers are found, and it\u0027s set to match\nany device node that isn\u0027t a 8259.  That works fine on pSeries and\navoids having to deal with some of the complexities of split source\ncontrollers vs. presentation controllers in the pSeries device trees.\n\nThe powerpc i8259 PIC driver now always requests the legacy interrupt\nrange. It also has the feature of being able to match any device node\n(including NULL) if passed no device node as an input. That will help\nporting over platforms with broken device-trees like Pegasos who don\u0027t\nhave a proper interrupt tree.\n\nSigned-off-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n"
    },
    {
      "commit": "36874579dbf4cafa31486d4207c6807efbbf1378",
      "tree": "9a1ec6f679e44d0d98969490d1b9e948739e9024",
      "parents": [
        "575e321606c5673efabf28c0fa075e198980c44e"
      ],
      "author": {
        "name": "David Woodhouse",
        "email": "dwmw2@infradead.org",
        "time": "Sat Jan 14 00:15:19 2006 +0000"
      },
      "committer": {
        "name": "Paul Mackerras",
        "email": "paulus@samba.org",
        "time": "Sat Jan 14 13:19:18 2006 +1100"
      },
      "message": "[PATCH] powerpc: macio-adb build fix\n\nThis makes macio-adb.c build again. Entirely untested.\n\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}