)]}'
{
  "log": [
    {
      "commit": "ebccec0fa4e35dff0c18663a492a65f4dc6cad7a",
      "tree": "4850a46c52d48080fa5af5349aee04b4837ab148",
      "parents": [
        "bcdd4efc1b6b8b98f30e127115f4bc7bbcd6f7ce"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Fri Oct 10 15:58:14 2008 +0100"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Mon Oct 13 21:51:56 2008 +0100"
      },
      "message": "mfd: Add WM8350 interrupt support\n\nThe WM8350 has an interrupt line to the CPU which is shared by the\ndevices on the CPU. This patch adds support for the interrupt\ncontroller within the WM8350 which identifies which identifies the\ninterrupt cause. In common with other similar chips this is done\noutside the standard interrupt framework due to the need to access\nthe interrupt controller over an interrupt-driven bus.\n\nThis code was all originally written by Liam Girdwood with updates for\nsubmission by me.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    },
    {
      "commit": "bcdd4efc1b6b8b98f30e127115f4bc7bbcd6f7ce",
      "tree": "5f58a36bcfefb07cc9a44faf38c91b8bc7e3c1c1",
      "parents": [
        "0e7203933224cbe09b5a9125f55b177b8dd5b1bd"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Fri Oct 10 15:58:13 2008 +0100"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Mon Oct 13 21:51:56 2008 +0100"
      },
      "message": "mfd: Add initialisation callback for WM8350\n\nSome functions of the WM8350 require board-specific initialisation on\nstartup. Provide a callback to the WM8350 driver in platform data\nfor platforms to use to configure the chip.  Use of a callback allows\nplatforms to control the ordering of initialisation which can be\nimportant.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    },
    {
      "commit": "c661a0b92d487ac20cc9cddbb8f4d40e4dcdbec1",
      "tree": "9970f064cceac8a7cbe7b265305c49412a1e13a5",
      "parents": [
        "89b4012befb1abca5e86d232bc0e2a797b0d9825"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Fri Oct 10 15:58:11 2008 +0100"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Mon Oct 13 21:51:55 2008 +0100"
      },
      "message": "mfd: Add I2C control support for WM8350\n\nImplement the I2C control interface for the WM8350. This code was\noriginally written by Liam Girdwood and has been updated for submission\nby Mark Brown.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    }
  ]
}