)]}'
{
  "log": [
    {
      "commit": "80ccba1186d48fa728dc4b1456cc07ffb07da501",
      "tree": "b58826b8d0e42e2a41e5f5632bf95e52f9dfc676",
      "parents": [
        "b86ec7ed2877f560ff069e8ed1b433a9005619c6"
      ],
      "author": {
        "name": "Bjorn Helgaas",
        "email": "bjorn.helgaas@hp.com",
        "time": "Fri Jun 13 10:52:11 2008 -0600"
      },
      "committer": {
        "name": "Jesse Barnes",
        "email": "jbarnes@virtuousgeek.org",
        "time": "Wed Jun 25 16:05:13 2008 -0700"
      },
      "message": "PCI: use dev_printk when possible\n\nConvert printks to use dev_printk().\n\nI converted pr_debug() to dev_dbg().  Both use KERN_DEBUG and are enabled\nonly when DEBUG is defined.\n\nI converted printk(KERN_DEBUG) to dev_printk(KERN_DEBUG), not to dev_dbg(),\nbecause dev_dbg() is only enabled when DEBUG is defined.\n\nI converted DBG(KERN_INFO) (only in setup-bus.c) to dev_info().  The DBG()\nname makes it sound like debug, but it\u0027s been enabled forever, so dev_info()\npreserves the previous behavior.\n\nI tried to make the resource assignment formats more consistent, e.g.,\n  \"BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] flags %#lx\\n\"\ninstead of sometimes using \"start-end\" and sometimes using \"size@start\".\nI\u0027m not attached to one or the other; I\u0027d just like them consistent.\n\nSigned-off-by: Bjorn Helgaas \u003cbjorn.helgaas@hp.com\u003e\nSigned-off-by: Jesse Barnes \u003cjbarnes@virtuousgeek.org\u003e\n"
    },
    {
      "commit": "884525655d07fdee9245716b998ecdc45cdd8007",
      "tree": "975cbf2b5079430240d3496323df1a266be95d27",
      "parents": [
        "d75b305295c38ba9610ff3b2200f7d1989dc55fd"
      ],
      "author": {
        "name": "Ivan Kokshaysky",
        "email": "ink@jurassic.park.msu.ru",
        "time": "Sun Mar 30 19:50:14 2008 +0400"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Sun Apr 20 21:47:08 2008 -0700"
      },
      "message": "PCI: clean up resource alignment management\n\nDone per Linus\u0027 request and suggestions. Linus has explained that\nbetter than I\u0027ll be able to explain:\n\nOn Thu, Mar 27, 2008 at 10:12:10AM -0700, Linus Torvalds wrote:\n\u003e Actually, before we go any further, there might be a less intrusive\n\u003e alternative: add just a couple of flags to the resource flags field (we\n\u003e still have something like 8 unused bits on 32-bit), and use those to\n\u003e implement a generic \"resource_alignment()\" routine.\n\u003e\n\u003e Two flags would do it:\n\u003e\n\u003e  - IORESOURCE_SIZEALIGN: size indicates alignment (regular PCI device\n\u003e    resources)\n\u003e\n\u003e  - IORESOURCE_STARTALIGN: start field is alignment (PCI bus resources\n\u003e    during probing)\n\u003e\n\u003e and then the case of both flags zero (or both bits set) would actually be\n\u003e \"invalid\", and we would also clear the IORESOURCE_STARTALIGN flag when we\n\u003e actually allocate the resource (so that we don\u0027t use the \"start\" field as\n\u003e alignment incorrectly when it no longer indicates alignment).\n\u003e\n\u003e That wouldn\u0027t be totally generic, but it would have the nice property of\n\u003e automatically at least add sanity checking for that whole \"res-\u003estart has\n\u003e the odd meaning of \u0027alignment\u0027 during probing\" and remove the need for a\n\u003e new field, and it would allow us to have a generic \"resource_alignment()\"\n\u003e routine that just gets a resource pointer.\n\nBesides, I removed IORESOURCE_BUS_HAS_VGA flag which was unused for ages.\n\nSigned-off-by: Ivan Kokshaysky \u003cink@jurassic.park.msu.ru\u003e\nCc: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\nCc: Gary Hade \u003cgaryhade@us.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "842de40d93e00a5c40a1a7f520a6fbe422994e99",
      "tree": "ec59fd64804a4f5cde40f5edf43fabd5ddb3c413",
      "parents": [
        "7d715a6c1ae5785d00fb9a876b5abdfc43abc44b"
      ],
      "author": {
        "name": "Bjorn Helgaas",
        "email": "bjorn.helgaas@hp.com",
        "time": "Tue Mar 04 11:56:47 2008 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Sun Apr 20 21:47:04 2008 -0700"
      },
      "message": "PCI: add generic pci_enable_resources()\n\nEach architecture has its own pcibios_enable_resources() implementation.\nThese differ in many minor ways that have nothing to do with actual\narchitectural differences.  Follow-on patches will make most arches\nuse this generic version instead.\n\nThis version is based on powerpc, which seemed most up-to-date.  The only\nfunctional difference from the x86 version is that this uses \"!r-\u003eparent\"\nto check for resource collisions instead of \"!r-\u003estart \u0026\u0026 r-\u003eend\".\n\nSigned-off-by: Bjorn Helgaas \u003cbjorn.helgaas@hp.com\u003e\nAcked-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: David Howells \u003cdhowells@redhat.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "2baad5f96b498812626eadb6f6af3eb41d8656a3",
      "tree": "96617ff2422732cccd9b8741befe593232af7201",
      "parents": [
        "4b5ff469234b8ab5cd05f4a201cbb229896729d0"
      ],
      "author": {
        "name": "Adrian Bunk",
        "email": "bunk@kernel.org",
        "time": "Wed Feb 13 23:30:12 2008 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Sun Apr 20 21:46:52 2008 -0700"
      },
      "message": "PCI: #if 0 pci_assign_resource_fixed()\n\nAn unused function that bloated the kernel only when CONFIG_EMBEDDED was\nenabled...\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "6015fbefc4dfe1706b64d33c256878b8296d1470",
      "tree": "6aa617715163f3f27c3276138009f38197d76fb0",
      "parents": [
        "c40a22e0ce5eb400f27449e59e43d021bee58b8d"
      ],
      "author": {
        "name": "Benjamin Herrenschmidt",
        "email": "benh@kernel.crashing.org",
        "time": "Mon Dec 10 17:32:16 2007 +1100"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Feb 01 15:04:25 2008 -0800"
      },
      "message": "PCI: Fix warning in setup-res.c on 32-bit platforms with 64-bit resources\n\nThis adds appropriate casts to avoid a warning and print the correct\nvalues in pr_debug.\n\nSigned-off-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "eb003ec26556057e5f27d4b989bbb432d0bdc0f4",
      "tree": "25f8d27c46f3d289590eef153e8412caba2ddd8b",
      "parents": [
        "b09549ef9b66b9547520572bedd7af3c1f0747d7"
      ],
      "author": {
        "name": "Adrian Bunk",
        "email": "bunk@kernel.org",
        "time": "Sat Oct 27 03:06:33 2007 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Feb 01 15:04:18 2008 -0800"
      },
      "message": "PCI: drivers/pci/: remove unused exports\n\nThis patch removes the following unused exports:\n- remove the following unused EXPORT_SYMBOL\u0027s:\n - pci-acpi.c: pci_osc_support_set\n - proc.c: pci_proc_detach_bus\n- remove the following unused EXPORT_SYMBOL_GPL\u0027s:\n  - bus.c: pci_walk_bus\n  - probe.c: pci_create_bus\n  - setup-res.c: pci_claim_resource\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "96bde06a2df1b363206d3cdef53134b84ff37813",
      "tree": "4d3cc2c8c73a0534bc65e56ff1dec39eaa823b4c",
      "parents": [
        "6ba186361ed2cda7e174856a3ab8a8e3237b3c3d"
      ],
      "author": {
        "name": "Sam Ravnborg",
        "email": "sam@ravnborg.org",
        "time": "Mon Mar 26 21:53:30 2007 -0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed May 02 19:02:35 2007 -0700"
      },
      "message": "pci: do not mark exported functions as __devinit\n\nFunctions marked __devinit will be removed after kernel init.  But being\nexported they are potentially called by a module much later.\n\nSo the safer choice seems to be to keep the function even in the non\nCONFIG_HOTPLUG case.\n\nThis silence the follwoing section mismatch warnings:\nWARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between \u0027__ksymtab_pci_bus_add_device\u0027 (at offset 0x20) and \u0027__ksymtab_pci_walk_bus\u0027\nWARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between \u0027__ksymtab_pci_create_bus\u0027 (at offset 0x40) and \u0027__ksymtab_pci_stop_bus_device\u0027\nWARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between \u0027__ksymtab_pci_bus_max_busnr\u0027 (at offset 0xc0) and \u0027__ksymtab_pci_assign_resource_fixed\u0027\nWARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between \u0027__ksymtab_pci_claim_resource\u0027 (at offset 0xe0) and \u0027__ksymtab_pcie_port_bus_type\u0027\nWARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between \u0027__ksymtab_pci_bus_add_devices\u0027 (at offset 0x70) and \u0027__ksymtab_pci_bus_alloc_resource\u0027\nWARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between \u0027__ksymtab_pci_scan_bus_parented\u0027 (at offset 0x90) and \u0027__ksymtab_pci_root_buses\u0027\nWARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between \u0027__ksymtab_pci_bus_assign_resources\u0027 (at offset 0x4d0) and \u0027__ksymtab_pci_bus_size_bridges\u0027\nWARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between \u0027__ksymtab_pci_bus_size_bridges\u0027 (at offset 0x4e0) and \u0027__ksymtab_pci_setup_cardbus\u0027\n\nSigned-off-by: Sam Ravnborg \u003csam@ravnborg.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "fb0f2b40faff41f03acaa2ee6e6231fc96ca497c",
      "tree": "10f2f69cb43d6440313bb3efdc53ca69334830c0",
      "parents": [
        "7e7a43c32a8970ea2bfc3d1af353dcb1a9237769"
      ],
      "author": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Tue Dec 19 13:12:08 2006 -0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Dec 20 10:54:43 2006 -0800"
      },
      "message": "PCI legacy resource fix\n\nSince commit 368c73d4f689dae0807d0a2aa74c61fd2b9b075f the kernel will try\nto update the non-writeable BAR registers 0..3 of PIIX4 IDE adapters if\npci_assign_unassigned_resources() is used to do full resource assignment of\nthe bus.  This fails because in the PIIX4 these BAR registers have\nimplicitly assumed values and read back as zero; it used to work because\nthe kernel used to just write zero to that register the read back value did\nmatch what was written.\n\nThe fix is a new resource flag IORESOURCE_PCI_FIXED used to mark a resource\nas non-movable.  This will also be useful to keep other import system\nresources from being moved around - for example system consoles on PCI\nbusses.\n\n[akpm@osdl.org: cleanup]\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nAcked-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "e31dd6e4520439ceae4753f32dd2da2c345e929a",
      "tree": "fea87cfb0077135c6dcaf7849e518ee31733b0fc",
      "parents": [
        "d75fc8bbccf7c019994bcfd6255d5b56335ed21d"
      ],
      "author": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Jun 12 17:06:02 2006 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Jun 27 09:24:00 2006 -0700"
      },
      "message": "[PATCH] 64bit resource: change pci core and arch code to use resource_size_t\n\nBased on a patch series originally from Vivek Goyal \u003cvgoyal@in.ibm.com\u003e\n\nCc: Vivek Goyal \u003cvgoyal@in.ibm.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "1396a8c3f7cec9f5e0d00bd089be21fc468f0f1c",
      "tree": "b96018459e26a24e20221f0bb7d5bb25d6608147",
      "parents": [
        "7c7459d1f91abdf1e31ef80cad526e83e8b8ba4e"
      ],
      "author": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Jun 12 15:14:29 2006 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Jun 27 09:23:58 2006 -0700"
      },
      "message": "[PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers\n\nThis is needed if we wish to change the size of the resource structures.\n\nBased on an original patch from Vivek Goyal \u003cvgoyal@in.ibm.com\u003e\n\nCc: Vivek Goyal \u003cvgoyal@in.ibm.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "75acfecaa031c0e1bc412cee4fe58ba49ff3406c",
      "tree": "39f784dcc17a093e80463163867ec0e554942453",
      "parents": [
        "ea28502d5d0fc624777a8a6b4d6865d282055b05"
      ],
      "author": {
        "name": "Kumar Gala",
        "email": "galak@kernel.crashing.org",
        "time": "Mon May 01 10:43:46 2006 -0500"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Jun 21 11:59:59 2006 -0700"
      },
      "message": "[PATCH] PCI: Add pci_assign_resource_fixed -- allow fixed address assignments\n\nPCI: Add pci_assign_resource_fixed -- allow fixed address assignments\n\nOn some embedded systems the PCI address for hotplug devices are not only\nknown a priori but are required to be at a given PCI address for other\nmaster in the system to be able to access.\n\nAn example of such a system would be an FPGA which is setup from user space\nafter the system has booted.  The FPGA may be access by DSPs in the system\nand those DSPs expect the FPGA at a fixed PCI address.\n\nAdded pci_assign_resource_fixed() as a way to allow assignment of the PCI\ndevices\u0027s BARs at fixed PCI addresses.\n\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "dd8c49966854a5245f3ed4769c9114e7afd819ef",
      "tree": "3078de189a3168e4c07bf1cda2f9521f55fb50b8",
      "parents": [
        "2181c971952ec2af56cd9cc68453f7ad5a0a38d6"
      ],
      "author": {
        "name": "linas",
        "email": "linas@austin.ibm.com",
        "time": "Tue Jan 10 15:15:47 2006 -0600"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Jan 31 18:00:12 2006 -0800"
      },
      "message": "[PATCH] PCI Hotplug/powerpc: module build break\n\nThe RPAPHP hoplug driver will not build as a module, because it calls\non pci_claim_resource(), which is not exported. This exports the symbol.\nProblem reported by Olaf Hering \u003colh@suse.de\u003e\n\nA grep indicates that building drivers/parisc/lba_pci.c\nwould have trouble building as a module for the same reason.\n\nSigned-off-by: Linas Vepstas \u003clinas@austin.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "085ae41f66657a9655ce832b0a61832a06f0e1dc",
      "tree": "215690b947b14fa18cbb2810db1a4082ad607e7a",
      "parents": [
        "064b53dbcc977dbf2753a67c2b8fc1c061d74f21"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Aug 08 13:19:08 2005 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Thu Sep 08 14:57:25 2005 -0700"
      },
      "message": "[PATCH] Make sparc64 use setup-res.c\n\nThere were three changes necessary in order to allow\nsparc64 to use setup-res.c:\n\n1) Sparc64 roots the PCI I/O and MEM address space using\n   parent resources contained in the PCI controller structure.\n   I\u0027m actually surprised no other platforms do this, especially\n   ones like Alpha and PPC{,64}.  These resources get linked into the\n   iomem/ioport tree when PCI controllers are probed.\n\n   So the hierarchy looks like this:\n\n   iomem --|\n\t   PCI controller 1 MEM space --|\n\t\t\t\t        device 1\n\t\t\t\t\tdevice 2\n\t\t\t\t\tetc.\n\t   PCI controller 2 MEM space --|\n\t\t\t\t        ...\n   ioport --|\n            PCI controller 1 IO space --|\n\t\t\t\t\t...\n            PCI controller 2 IO space --|\n\t\t\t\t\t...\n\n   You get the idea.  The drivers/pci/setup-res.c code allocates\n   using plain iomem_space and ioport_space as the root, so that\n   wouldn\u0027t work with the above setup.\n\n   So I added a pcibios_select_root() that is used to handle this.\n   It uses the PCI controller struct\u0027s io_space and mem_space on\n   sparc64, and io{port,mem}_resource on every other platform to\n   keep current behavior.\n\n2) quirk_io_region() is buggy.  It takes in raw BUS view addresses\n   and tries to use them as a PCI resource.\n\n   pci_claim_resource() expects the resource to be fully formed when\n   it gets called.  The sparc64 implementation would do the translation\n   but that\u0027s absolutely wrong, because if the same resource gets\n   released then re-claimed we\u0027ll adjust things twice.\n\n   So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource()\n   conversion before passing it on to pci_claim_resource().\n\n3) I was mistakedly __init\u0027ing the function methods the PCI controller\n   drivers provide on sparc64 to implement some parts of these\n   routines.  This was, of course, easy to fix.\n\nSo we end up with the following, and that nasty SPARC64 makefile\nifdef in drivers/pci/Makefile is finally zapped.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "064b53dbcc977dbf2753a67c2b8fc1c061d74f21",
      "tree": "39efa08fb7b0b7991bbfc4772f4fc3de0e8d11fa",
      "parents": [
        "1248d636122e4ec9d7802b850904e3bb48a0da23"
      ],
      "author": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Jul 27 10:19:44 2005 -0400"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Thu Sep 08 14:57:24 2005 -0700"
      },
      "message": "[PATCH] PCI: restore BAR values after D3hot-\u003eD0 for devices that need it\n\nSome PCI devices (e.g. 3c905B, 3c556B) lose all configuration\n(including BARs) when transitioning from D3hot-\u003eD0.  This leaves such\na device in an inaccessible state.  The patch below causes the BARs\nto be restored when enabling such a device, so that its driver will\nbe able to access it.\n\nThe patch also adds pci_restore_bars as a new global symbol, and adds a\ncorrepsonding EXPORT_SYMBOL_GPL for that.\n\nSome firmware (e.g. Thinkpad T21) leaves devices in D3hot after a\n(re)boot.  Most drivers call pci_enable_device very early, so devices\nleft in D3hot that lose configuration during the D3hot-\u003eD0 transition\nwill be inaccessible to their drivers.\n\nDrivers could be modified to account for this, but it would\nbe difficult to know which drivers need modification.  This is\nespecially true since often many devices are covered by the same\ndriver.  It likely would be necessary to replicate code across dozens\nof drivers.\n\nThe patch below should trigger only when transitioning from D3hot-\u003eD0\n(or at boot), and only for devices that have the \"no soft reset\" bit\ncleared in the PM control register.  I believe it is safe to include\nthis patch as part of the PCI infrastructure.\n\nThe cleanest implementation of pci_restore_bars was to call\npci_update_resource.  Unfortunately, that does not currently exist\nfor the sparc64 architecture.  The patch below includes a null\nimplemenation of pci_update_resource for sparc64.\n\nSome have expressed interest in making general use of the the\npci_restore_bars function, so that has been exported to GPL licensed\nmodules.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "755528c860b05fcecda1c88a2bdaffcb50760a7f",
      "tree": "d8b7aaaec93de93841b46e8e05a3b454d05bd357",
      "parents": [
        "26aad69e3dd854abe9028ca873fb40b410a39dd7"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Fri Aug 26 10:49:22 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Fri Aug 26 10:49:22 2005 -0700"
      },
      "message": "Ignore disabled ROM resources at setup\n\nWriting even a disabled value seems to mess up some matrox graphics\ncards.  It may be a card-related issue, but we may also be writing\nreserved low bits in the result.\n\nThis was a fall-out of switching x86 over to the generic PCI resource\nallocation code, and needs more debugging.  In particular, the old x86\ncode defaulted to not doing any resource allocations at all for ROM\nresources.\n\nIn the meantime, this has been reported to make X happier by Helge\nHafting \u003chelgehaf@aitel.hist.no\u003e.\n\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "dc836b5b6fcde95f750a4790d8200fabaf563dc9",
      "tree": "893613626de4794a7b13fe6793bdebc79420c433",
      "parents": [
        "138b9dd1fd7b44176af4f3b672060c790b0eaf55"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Mon Aug 08 18:46:09 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Mon Aug 08 18:46:09 2005 -0700"
      },
      "message": "Revert \"[PATCH] PCI: restore BAR values...\"\n\nRevert commit fec59a711eef002d4ef9eb8de09dd0a26986eb77, which is\nbreaking sparc64 that doesn\u0027t have a working pci_update_resource.\n\nWe\u0027ll re-do this after 2.6.13 when we\u0027ll do it all properly.\n"
    },
    {
      "commit": "cf7bee5a0bf270a4eace0be39329d6ac0136cc47",
      "tree": "f2df9af0c11dbc0411f628d709e60de46296d799",
      "parents": [
        "0d317fb72fe3cf0f611608cf3a3015bbe6cd2a66"
      ],
      "author": {
        "name": "Ivan Kokshaysky",
        "email": "ink@jurassic.park.msu.ru",
        "time": "Sun Aug 07 13:49:59 2005 +0400"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Sun Aug 07 09:50:56 2005 -0700"
      },
      "message": "[PATCH] Fix restore of 64-bit PCI BAR\u0027s\n\nFor 64-bit BAR[i] only pci_dev-\u003eresource[i] is valid, -\u003eresource[i+1]\nslot is unused and contains zeroes in all fields.\n\nSo when we update a PCI BAR, all we need is just to check that we\u0027re\ngoing to update a _valid_ resource.\n\nAlso make sure to write high bits - use \"x \u003e\u003e 16 \u003e\u003e 16\" (rather than the\nsimpler \"\u003e\u003e 32\") to avoid warnings on 32-bit architectures where we\u0027re\nnot going to have any high bits.\n\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "fec59a711eef002d4ef9eb8de09dd0a26986eb77",
      "tree": "4287cefdd94ce686ca0cad40f7897d8acd9c89dc",
      "parents": [
        "c306895167c8384b88bc02945a0d226a04218fa5"
      ],
      "author": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Aug 04 18:06:10 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Thu Aug 04 21:32:46 2005 -0700"
      },
      "message": "[PATCH] PCI: restore BAR values after D3hot-\u003eD0 for devices that need it\n\nSome PCI devices (e.g. 3c905B, 3c556B) lose all configuration\n(including BARs) when transitioning from D3hot-\u003eD0.  This leaves such\na device in an inaccessible state.  The patch below causes the BARs\nto be restored when enabling such a device, so that its driver will\nbe able to access it.\n\nThe patch also adds pci_restore_bars as a new global symbol, and adds a\ncorrepsonding EXPORT_SYMBOL_GPL for that.\n\nSome firmware (e.g. Thinkpad T21) leaves devices in D3hot after a\n(re)boot.  Most drivers call pci_enable_device very early, so devices\nleft in D3hot that lose configuration during the D3hot-\u003eD0 transition\nwill be inaccessible to their drivers.\n\nDrivers could be modified to account for this, but it would\nbe difficult to know which drivers need modification.  This is\nespecially true since often many devices are covered by the same\ndriver.  It likely would be necessary to replicate code across dozens\nof drivers.\n\nThe patch below should trigger only when transitioning from D3hot-\u003eD0\n(or at boot), and only for devices that have the \"no soft reset\" bit\ncleared in the PM control register.  I believe it is safe to include\nthis patch as part of the PCI infrastructure.\n\nThe cleanest implementation of pci_restore_bars was to call\npci_update_resource.  Unfortunately, that does not currently exist\nfor the sparc64 architecture.  The patch below includes a null\nimplemenation of pci_update_resource for sparc64.\n\nSome have expressed interest in making general use of the the\npci_restore_bars function, so that has been exported to GPL licensed\nmodules.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}