)]}' { "log": [ { "commit": "64a87b244b9297667ca80264aab849a36f494884", "tree": "554d78d1cfe594b92409a19b3ed1d32efcbd31cc", "parents": [ "9f5de6b105bfa45911d46566df0b36720b648c42" ], "author": { "name": "Boaz Harrosh", "email": "bharrosh@panasas.com", "time": "Wed Apr 30 11:19:47 2008 +0300" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri May 02 10:18:22 2008 -0500" }, "message": "[SCSI] Let scsi_cmnd-\u003ecmnd use request-\u003ecmd buffer\n\n - struct scsi_cmnd had a 16 bytes command buffer of its own.\n This is an unnecessary duplication and copy of request\u0027s\n cmd. It is probably left overs from the time that scsi_cmnd\n could function without a request attached. So clean that up.\n\n - Once above is done, few places, apart from scsi-ml, needed\n adjustments due to changing the data type of scsi_cmnd-\u003ecmnd.\n\n - Lots of drivers still use MAX_COMMAND_SIZE. So I have left\n that #define but equate it to BLK_MAX_CDB. The way I see it\n and is reflected in the patch below is.\n MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB\n as per the SCSI standard and is not related\n to the implementation.\n BLK_MAX_CDB. - The allocated space at the request level\n\n - I have audit all ISA drivers and made sure none use -\u003ecmnd in a DMA\n Operation. Same audit was done by Andi Kleen.\n\n(*)fixed-length here means commands that their size can be determined\n by their opcode and the CDB does not carry a length specifier, (unlike\n the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly\n true and the SCSI standard also defines extended commands and\n vendor specific commands that can be bigger than 16 bytes. The kernel\n will support these using the same infrastructure used for VARLEN CDB\u0027s.\n So in effect MAX_COMMAND_SIZE means the maximum size command\n scsi-ml supports without specifying a cmd_len by ULD\u0027s\n\nSigned-off-by: Boaz Harrosh \u003cbharrosh@panasas.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "b80ca4f7ee36c26d300c5a8f429e73372d153379", "tree": "277987f64a44e793eb35c0bde3e48b582fad445a", "parents": [ "94aa5e5f6251ca0e1d77e083f8c2f9f40ee548c5" ], "author": { "name": "FUJITA Tomonori", "email": "tomof@acm.org", "time": "Sun Jan 13 15:46:13 2008 +0900" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Wed Jan 23 11:29:27 2008 -0600" }, "message": "[SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE\n\nThis replaces sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE in\nseveral LLDs. It\u0027s a preparation for the future changes to remove\nsense_buffer array in scsi_cmnd structure.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "0cba35e42ce58a5b20319f9f57f9aa4ce37daf76", "tree": "5cc27ffd3155f3473513467ac39d1249eb3d544d", "parents": [ "2da8658910580787ced4abc668adfb0f09710efb" ], "author": { "name": "Thomas Bogendoerfer", "email": "tsbogend@alpha.franken.de", "time": "Wed Jul 11 19:08:31 2007 +0200" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.localdomain", "time": "Sat Jul 14 19:12:43 2007 -0500" }, "message": "[SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs\n\nremove printk, which triggers because of low scsi clock on SNI RMs\n\nSigned-off-by: Thomas Bogendoerfer \u003ctsbogend@alpha.franken.de\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "632731345bfb87fd1f4dc509928cc4a7efc12a89", "tree": "aa656433bc8bd5b48581d15b3e7614bdcafc8ff0", "parents": [ "cc78d30af0823f33069fb4813c47571d4e0675a2" ], "author": { "name": "Kars de Jong", "email": "jongk@linux-m68k.org", "time": "Sun Jun 17 14:47:05 2007 +0200" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Sun Jun 17 16:15:56 2007 -0500" }, "message": "[SCSI] 53c700: m68k support for the 53c700 SCSI core\n\nAdd m68k support to the 53c700 SCSI driver\n\nSigned-off-by: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "3258a4d5690880a62121553b604893ecaca7d042", "tree": "42c10b636283144b6e5f50c906b024534d2c3e30", "parents": [ "824d7b570b4dec49e868c251d670941b02a1e489" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Mon May 14 19:12:55 2007 +0900" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Sat May 26 16:30:04 2007 -0500" }, "message": "[SCSI] 53c700: convert to use the data buffer accessors\n\n- remove the unnecessary map_single path.\n\n- convert to use the new accessors for the sg lists and the\nparameters.\n\nJens Axboe \u003cjens.axboe@oracle.com\u003e did the for_each_sg cleanup.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "cd354f1ae75e6466a7e31b727faede57a1f89ca5", "tree": "09a2da1672465fefbc7fe06ff4e6084f1dd14c6b", "parents": [ "3fc605a2aa38899c12180ca311f1eeb61a6d867e" ], "author": { "name": "Tim Schmielau", "email": "tim@physik3.uni-rostock.de", "time": "Wed Feb 14 00:33:14 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Feb 14 08:09:54 2007 -0800" }, "message": "[PATCH] remove many unneeded #includes of sched.h\n\nAfter Al Viro (finally) succeeded in removing the sched.h #include in module.h\nrecently, it makes sense again to remove other superfluous sched.h includes.\nThere are quite a lot of files which include it but don\u0027t actually need\nanything defined in there. Presumably these includes were once needed for\nmacros that used to live in sched.h, but moved to other header files in the\ncourse of cleaning it up.\n\nTo ease the pain, this time I did not fiddle with any header files and only\nremoved #includes from .c-files, which tend to cause less trouble.\n\nCompile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,\narm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,\nallmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all\nconfigs in arch/arm/configs on arm. I also checked that no new warnings were\nintroduced by the patch (actually, some warnings are removed that were emitted\nby unnecessarily included header files).\n\nSigned-off-by: Tim Schmielau \u003ctim@physik3.uni-rostock.de\u003e\nAcked-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f67a9c1592b3a0292376bdcbdcc34cbe353967a8", "tree": "4e5379b864a0e8823e48ad7249d637f6a0ec1423", "parents": [ "a8b3485287731978899ced11f24628c927890e78" ], "author": { "name": "Thomas Bogendoerfer", "email": "tsbogend@alpha.franken.de", "time": "Mon Dec 25 21:30:08 2006 +0100" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Sat Jan 13 13:44:30 2007 -0600" }, "message": "[SCSI] 53c700: Allow setting burst length\n\nThis is a patch, which allows not only disabling bursting but to specify\ndifferent burst lenghts. This feature is needed to get the 53c700 driver\nworking for the onboard SCSI controller of SNI RM machines, which only\nwork reliably with a 4 word burst length.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "d3fa72e4556ec1f04e46a0d561d9e785ecaa173d", "tree": "9c9b51dbecc27e977135b4e4793ea3dc99e8ba66", "parents": [ "f67637ee4b5d90d41160d755b9a8cca18c394586" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Wed Dec 06 20:38:56 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.osdl.org", "time": "Thu Dec 07 08:39:41 2006 -0800" }, "message": "[PATCH] Pass struct dev pointer to dma_cache_sync()\n\nPass struct dev pointer to dma_cache_sync()\n\ndma_cache_sync() is ill-designed in that it does not have a struct device\npointer argument which makes proper support for systems that consist of a\nmix of coherent and non-coherent DMA devices hard. Change dma_cache_sync\nto take a struct device pointer as first argument and fix all its callers\nto pass it.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "f67637ee4b5d90d41160d755b9a8cca18c394586", "tree": "dffa1fa32f8e0462c8e46c4f8fefa058be349d6a", "parents": [ "83b7b44e1c1e9e493ccd4146558481ab5af0116a" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Wed Dec 06 20:38:54 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.osdl.org", "time": "Thu Dec 07 08:39:41 2006 -0800" }, "message": "[PATCH] Add struct dev pointer to dma_is_consistent()\n\ndma_is_consistent() is ill-designed in that it does not have a struct\ndevice pointer argument which makes proper support for systems that consist\nof a mix of coherent and non-coherent DMA devices hard. Change\ndma_is_consistent to take a struct device pointer as first argument and fix\nthe sole caller to pass it.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "c603d04ef6826a29f50cb151cb992f256d0cf19d", "tree": "aa2dd677dde771b7b6d1b3149d359307f06c1e92", "parents": [ "46ddab7b1c7225269ad45d33fc39d0a385194360" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@steeleye.com", "time": "Fri Dec 01 11:25:12 2006 -0600" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Sun Dec 03 09:26:48 2006 -0600" }, "message": "[SCSI] 53c700: brown paper bag fix for auto request sense\n\nIn the switch over, I forgot to set the command length, so it sends out\na request sense with whatever length the prior command had (and fails\nbadly if it wasn\u0027t 6).\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "7d12e780e003f93433d49ce78cfedf4b4c52adc5", "tree": "6748550400445c11a306b132009f3001e3525df8", "parents": [ "da482792a6d1a3fbaaa25fae867b343fb4db3246" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Thu Oct 05 14:55:46 2006 +0100" }, "committer": { "name": "David Howells", "email": "dhowells@warthog.cambridge.redhat.com", "time": "Thu Oct 05 15:10:12 2006 +0100" }, "message": "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers\n\nMaintain a per-CPU global \"struct pt_regs *\" variable which can be used instead\nof passing regs around manually through all ~1800 interrupt handlers in the\nLinux kernel.\n\nThe regs pointer is used in few places, but it potentially costs both stack\nspace and code to pass it around. On the FRV arch, removing the regs parameter\nfrom all the genirq function results in a 20% speed up of the IRQ exit path\n(ie: from leaving timer_interrupt() to leaving do_IRQ()).\n\nWhere appropriate, an arch may override the generic storage facility and do\nsomething different with the variable. On FRV, for instance, the address is\nmaintained in GR28 at all times inside the kernel as part of general exception\nhandling.\n\nHaving looked over the code, it appears that the parameter may be handed down\nthrough up to twenty or so layers of functions. Consider a USB character\ndevice attached to a USB hub, attached to a USB controller that posts its\ninterrupts through a cascaded auxiliary interrupt controller. A character\ndevice driver may want to pass regs to the sysrq handler through the input\nlayer which adds another few layers of parameter passing.\n\nI\u0027ve build this code with allyesconfig for x86_64 and i386. I\u0027ve runtested the\nmain part of the code on FRV and i386, though I can\u0027t test most of the drivers.\nI\u0027ve also done partial conversion for powerpc and MIPS - these at least compile\nwith minimal configurations.\n\nThis will affect all archs. Mostly the changes should be relatively easy.\nTake do_IRQ(), store the regs pointer at the beginning, saving the old one:\n\n\tstruct pt_regs *old_regs \u003d set_irq_regs(regs);\n\nAnd put the old one back at the end:\n\n\tset_irq_regs(old_regs);\n\nDon\u0027t pass regs through to generic_handle_irq() or __do_IRQ().\n\nIn timer_interrupt(), this sort of change will be necessary:\n\n\t-\tupdate_process_times(user_mode(regs));\n\t-\tprofile_tick(CPU_PROFILING, regs);\n\t+\tupdate_process_times(user_mode(get_irq_regs()));\n\t+\tprofile_tick(CPU_PROFILING);\n\nI\u0027d like to move update_process_times()\u0027s use of get_irq_regs() into itself,\nexcept that i386, alone of the archs, uses something other than user_mode().\n\nSome notes on the interrupt handling in the drivers:\n\n (*) input_dev() is now gone entirely. The regs pointer is no longer stored in\n the input_dev struct.\n\n (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does\n something different depending on whether it\u0027s been supplied with a regs\n pointer or not.\n\n (*) Various IRQ handler function pointers have been moved to type\n irq_handler_t.\n\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\n(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)\n" }, { "commit": "6e9a4738c9fadb7cbdcabc1e3b415159f3741ed9", "tree": "0e470bb8cd431d59698da5a6999ff35a347619a3", "parents": [ "397d6140e93156ecb9cafcd9be0db10ff3c12ab3" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Sat Sep 30 23:28:10 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Oct 01 00:39:24 2006 -0700" }, "message": "[PATCH] completions: lockdep annotate on stack completions\n\nAll on stack DECLARE_COMPLETIONs should be replaced by:\nDECLARE_COMPLETION_ONSTACK\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nAcked-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nAcked-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "c4e00fac42f268ed0a547cdd1d12bb8399864040", "tree": "1a54d87be2066c49b71a03764fcb4fc7f9c68c41", "parents": [ "29454dde27d8e340bb1987bad9aa504af7081eba", "d6b0c53723753fc0cfda63f56735b225c43e1e9a" ], "author": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Mon Jul 03 09:41:12 2006 -0500" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Mon Jul 03 09:41:12 2006 -0500" }, "message": "Merge ../scsi-misc-2.6\n\nConflicts:\n\n\tdrivers/scsi/nsp32.c\n\tdrivers/scsi/pcmcia/nsp_cs.c\n\nRemoval of randomness flag conflicts with SA_ -\u003e IRQF_ global\nreplacement.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7", "tree": "6d98881fe91fd9583c109208d5c27131b93fa248", "parents": [ "e02169b682bc448ccdc819dc8639ed34a23cedd8" ], "author": { "name": "Jörn Engel", "email": "joern@wohnheim.fh-wedel.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "0f13fc09db68de92585558984bff1c51b87db72f", "tree": "752bb8fa84e731f7877b74a033d1b90e2c060977", "parents": [ "53cb8a1f45e06a2627a6d89b151cccb95fa45cbf" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@steeleye.com", "time": "Thu Jun 29 13:02:11 2006 -0400" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Thu Jun 29 13:15:15 2006 -0400" }, "message": "[SCSI] 53c700: fix breakage caused by the autosense update\n\nA bit of a brown paper bag issue. The previous patch to remove the soon\nto be ripped out fields that were used in autosense actually broke the\ndriver. This patch fixes it and has been tested (honestly).\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "4311fa60b0d1cb5a2f62f646978294bca7b46cbb", "tree": "978aaa728b02c1d7fccd6b4a73e2f7c4fdead5db", "parents": [ "fcc18e83e1f6fd9fa6b333735bf0fcd530655511" ], "author": { "name": "Dave Jones", "email": "davej@redhat.com", "time": "Thu Jun 22 15:46:15 2006 -0400" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Mon Jun 26 09:10:17 2006 -0500" }, "message": "[SCSI] kmalloc argument switcheroo in recent 53c700 change.\n\nOn Wed, Jun 21, 2006 at 07:00:34PM +0000, Linux Kernel wrote:\n \u003e commit 67d59dfdeb21df2c16dcd478b66177e91178ecd0\n \u003e tree ae85703651d81740f4a6cd398f9dd4d6aabe6a2f\n \u003e parent 6db874fbdbedba5e15e76cc03b42f52ea70338c0\n \u003e author James Bottomley \u003cJames.Bottomley@steeleye.com\u003e Wed, 14 Jun 2006 07:31:19 -0500\n \u003e committer James Bottomley \u003cjejb@mulgrave.il.steeleye.com\u003e Tue, 20 Jun 2006 05:34:01 -0500\n \u003e\n \u003e [SCSI] 53c700: remove reliance on deprecated cmnd fields\n \u003e ...\n \u003e\n \u003e +\tSDp-\u003ehostdata \u003d kmalloc(GFP_KERNEL, sizeof(struct NCR_700_sense));\n \u003e +\n \u003e +\tif (!SDp-\u003ehostdata)\n \u003e +\t\treturn -ENOMEM;\n\n\"I\u0027ll take reversed arguments for $100 please Alex\".\n\nSigned-off-by: Dave Jones \u003cdavej@redhat.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "67d59dfdeb21df2c16dcd478b66177e91178ecd0", "tree": "ae85703651d81740f4a6cd398f9dd4d6aabe6a2f", "parents": [ "6db874fbdbedba5e15e76cc03b42f52ea70338c0" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@steeleye.com", "time": "Tue Jun 13 21:31:19 2006 -0500" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Mon Jun 19 19:34:01 2006 -0500" }, "message": "[SCSI] 53c700: remove reliance on deprecated cmnd fields\n\nThis one\u0027s quite tricky. The 53c700 uses the now deprecated fields of\nthe command structure for saving the prior command when it does\nautosense. To fix this, we have to add extra fields to the LUN to\naccommodate a copy of the real command.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "6391a11375de5e2bb1eb8481e54619761dc65d9f", "tree": "956aae1d278a3f731b2e6148ff40a69aa7957ea8", "parents": [ "9dc399de0840a478adb71278becf598d3ab3aacc" ], "author": { "name": "Tobias Klauser", "email": "tklauser@nuerscht.ch", "time": "Thu Jun 08 22:23:48 2006 -0700" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Sat Jun 10 10:45:30 2006 -0500" }, "message": "[SCSI] drivers/scsi: Use ARRAY_SIZE macro\n\nUse ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove\nduplicates of the macro.\n\nSigned-off-by: Tobias Klauser \u003ctklauser@nuerscht.ch\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "2b89dad0c7e3b03d45d9674ee9a7b49670df098e", "tree": "8f480172c865e9d6cfab9ed4888a043bc75ab4ce", "parents": [ "091686d3b5569d2ec76b9e6dab7f3608b6f64497" ], "author": { "name": "Hannes Reinecke", "email": "hare@suse.de", "time": "Tue May 23 10:29:28 2006 +0200" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Sun May 28 13:07:41 2006 -0400" }, "message": "[SCSI] audit drivers for incorrect max_id use\n\nmax_id now means the maximum number of ids on the bus, which means it\nis one greater than the largest possible id number.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "6ea3c0b2dac0d6a857d6bc010e544f4c901fff78", "tree": "0650d6e8b5be747eb192e558dd90e875ca7a13fb", "parents": [ "b0dc1db15225d5801bf3105966c9ce12c5142013" ], "author": { "name": "Matthew Wilcox", "email": "matthew@wil.cx", "time": "Tue Feb 07 07:54:46 2006 -0700" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.il.steeleye.com", "time": "Mon Feb 27 22:55:09 2006 -0600" }, "message": "[SCSI] Add spi_populate_*_msg functions\n\nIntroduce new helpers:\n - spi_populate_width_msg()\n - spi_populate_sync_msg()\n - spi_populate_ppr_msg()\n\nand use them in drivers which already enable the SPI transport.\n\nSigned-off-by: Matthew Wilcox \u003cmatthew@wil.cx\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "1abfd370134553f3b47e3e40a0526e05001409c2", "tree": "44653f5df309634cfdf347dcf1ec961667721101", "parents": [ "410ca5c7c6ed08bda165e8137bff26c3fbee5a1b" ], "author": { "name": "Matthew Wilcox", "email": "matthew@wil.cx", "time": "Thu Dec 15 16:22:01 2005 -0500" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.(none)", "time": "Thu Dec 15 18:41:27 2005 -0800" }, "message": "[SCSI] Rename scsi_print_msg to spi_print_msg\n\nRename scsi_print_msg to spi_print_msg and move its prototype from\nscsi_dbg.h to scsi_transport_spi.h\n\nSigned-off-by: Matthew Wilcox \u003cmatthew@wil.cx\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "422c0d61d591cbfb70f029e13505fb437e169d68", "tree": "ebafa14e1c1564ddf263868c3b6907642a8fdf1e", "parents": [ "017560fca496f72ed9dd734ffde63ce39dfe0411" ], "author": { "name": "Jeff Garzik", "email": "jgarzik@pobox.com", "time": "Mon Oct 24 18:05:09 2005 -0400" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.(none)", "time": "Fri Oct 28 21:10:16 2005 -0500" }, "message": "[SCSI] use scmd_id(), scmd_channel() throughout code\n\nWrap a highly common idiom. Makes the code easier to read, helps pave\nthe way for sdev-\u003e{id,channel} removal, and adds a token that can easily\nby grepped-for in the future.\n\nThere are a couple sdev_id() and scmd_printk() updates thrown in as well.\n\nRejections fixed up and\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "017560fca496f72ed9dd734ffde63ce39dfe0411", "tree": "e63ae9a28fc179e715eda32f12aaec4ca752651b", "parents": [ "3bf743e7c891d8be8295650b7a6a9b5af083b096" ], "author": { "name": "Jeff Garzik", "email": "jgarzik@pobox.com", "time": "Mon Oct 24 18:04:36 2005 -0400" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.(none)", "time": "Fri Oct 28 21:04:15 2005 -0500" }, "message": "[SCSI] use sfoo_printk() in drivers\n\nRejections fixed up and\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "10523b3b82456e416cbaffcc24ea2246980aa746", "tree": "fab3ac16bffb04cc25683e83a583b1cae3f0d450", "parents": [ "3fd3c0a5f53a0f9d8987b90acbd84f7dd8ef606e" ], "author": { "name": "Yani Ioannou", "email": "yani.ioannou@gmail.com", "time": "Tue May 17 06:43:37 2005 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jun 20 15:15:35 2005 -0700" }, "message": "[PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks\n\nSigned-off-by: Yani Ioannou \u003cyani.ioannou@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "df0ae2497ddefd72a87f3a3b34ff32455d7d4ae0", "tree": "552e02a44a21bd38db91729c85219542c2930ae2", "parents": [ "68b3aa7c9805aee9005a8ca53c5e99177961fbb9" ], "author": { "name": "Jeff Garzik ", "email": "jgarzik@pobox.com", "time": "Sat May 28 07:57:14 2005 -0400" }, "committer": { "name": "Jeff Garzik ", "email": "jgarzik@pobox.com", "time": "Fri Jun 17 12:05:18 2005 -0500" }, "message": "[SCSI] allow sleeping in -\u003eeh_host_reset_handler()\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "68b3aa7c9805aee9005a8ca53c5e99177961fbb9", "tree": "3f28891df0b3a1ecdfe6a98547d8f3c43b74e905", "parents": [ "94d0e7b805961c44e4dc486ffc21075084bb7175" ], "author": { "name": "Jeff Garzik ", "email": "jgarzik@pobox.com", "time": "Sat May 28 07:56:31 2005 -0400" }, "committer": { "name": "Jeff Garzik ", "email": "jgarzik@pobox.com", "time": "Fri Jun 17 12:05:10 2005 -0500" }, "message": "[SCSI] allow sleeping in -\u003eeh_bus_reset_handler()\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "3471c288036bf0835a82d0b1bbce2002f6e68390", "tree": "9a646a16877b7c600c583a32f703dd02a621c603", "parents": [ "e3df715501be3329986e5d9dfa9a477f49e7996b" ], "author": { "name": "Jeff Garzik ", "email": "jgarzik@pobox.com", "time": "Sat May 28 07:52:51 2005 -0400" }, "committer": { "name": "Jeff Garzik ", "email": "jgarzik@pobox.com", "time": "Fri Jun 17 12:04:45 2005 -0500" }, "message": "[SCSI] Remove no-op implementations of SCSI EH hooks\n\nDrivers need not implement a hook that returns FAILED, and does nothing\nelse, since the SCSI midlayer code will do that for us.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "56fece20086ebe32bce2c0d74ceadd516b56baae", "tree": "3ce88fad34483bfc393feb2ee5f3a7f4b8a17f0b", "parents": [ "e183b06bf0be6c525867476df186d20f8f1efe54" ], "author": { "name": "", "email": "jejb@mulgrave.(none)", "time": "Sun Apr 03 03:57:48 2005 -0600" }, "committer": { "name": "James Bottomley", "email": "jejb@titanic", "time": "Sat Apr 16 20:09:43 2005 -0500" }, "message": "[PATCH] finally fix 53c700 to use the generic iomem infrastructure\n\nThis driver has had it\u0027s own different infrastructure for doing this for\nages, but it\u0027s time it used the common one.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }