)]}'
{
  "log": [
    {
      "commit": "a43cf0f3511585493e3c948f7ec62f659486d0b3",
      "tree": "e0eea4a9bad08b210ae5a3e4f0c3a27e4ae10fdb",
      "parents": [
        "53474c042c0e1be39557474c945ad4a8e653ad46"
      ],
      "author": {
        "name": "Randy Dunlap",
        "email": "randy.dunlap@oracle.com",
        "time": "Tue Jan 22 21:39:33 2008 -0800"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "James.Bottomley@HansenPartnership.com",
        "time": "Wed Jan 23 13:44:31 2008 -0600"
      },
      "message": "[SCSI] NCR5380: fix section mismatch\n\nMany release() methods that are not __exit or __devexit call this\n__devexit function, so remove its \"__devexit\" attribute.\n\nscsi/g_NCR5380.c:\nWARNING: vmlinux.o(.text+0xadaf8c): Section mismatch: reference to .exit.text:NCR5380_exit (between \u0027generic_NCR5380_release_resources\u0027 and \u0027generic_NCR5380_biosparam\u0027)\nWARNING: vmlinux.o(.text+0xadd18c): Section mismatch: reference to .exit.text:NCR5380_exit (between \u0027generic_NCR5380_release_resources\u0027 and \u0027generic_NCR5380_biosparam\u0027)\nscsi/pas16.c, seagate.c:\nWARNING: vmlinux.o(.text+0xb29e91): Section mismatch: reference to .exit.text:NCR5380_exit (between \u0027pas16_release\u0027 and \u0027seagate_st0x_info\u0027)\nt128.c:\nWARNING: vmlinux.o(.text+0xb2a774): Section mismatch: reference to .exit.text:NCR5380_exit (between \u0027t128_release\u0027 and \u0027t128_biosparam\u0027)\ndtc.c, sym2/sym_fw.c:\nWARNING: vmlinux.o(.text+0xb2f215): Section mismatch: reference to .exit.text:NCR5380_exit (between \u0027dtc_release\u0027 and \u0027sym_fw1_patch\u0027)\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n"
    },
    {
      "commit": "baa9aac6a15a1990e9d2d7a5648f53dfccc440ad",
      "tree": "1225f5233a6d7faa84a0ced89218cf9f52c851d0",
      "parents": [
        "fc9b5118823e84b4ed0acddd99c1e453298e103d"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Thu Dec 13 16:14:14 2007 -0800"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "James.Bottomley@HansenPartnership.com",
        "time": "Fri Jan 11 18:28:11 2008 -0600"
      },
      "message": "[SCSI] NCR5380: minor irq handler cleanups\n\n* remove unnecessary cast\n\n* remove unnecessary use of \u0027irq\u0027 function arg\n\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n"
    },
    {
      "commit": "9e0fe44ddb9ed037188ac711af1e981ac32d3c32",
      "tree": "830f97b6e359696fd7a939d3b4a5689bbda01b54",
      "parents": [
        "9a3dd65bafcfa3338cfb4b6b7e12ff59aca0ac28"
      ],
      "author": {
        "name": "Boaz Harrosh",
        "email": "bharrosh@panasas.com",
        "time": "Mon Nov 05 11:23:35 2007 +0200"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "James.Bottomley@HansenPartnership.com",
        "time": "Fri Jan 11 18:22:39 2008 -0600"
      },
      "message": "[SCSI] NCR5380 family: convert to accessors \u0026 !use_sg cleanup\n\n  - This patch depends on:\n      NCR5380: Use scsi_eh API for REQUEST_SENSE invocation\n  - convert to accessors and !use_sg cleanup\n  - FIXME: Not sg-chain ready look for ++cmd-\u003eSCp.buffer\n\nSigned-off-by: Boaz Harrosh \u003cbharrosh@panasas.com\u003e\nSigned-off-by: James \u003cJames.Bottomley@HansenPartnership.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n"
    },
    {
      "commit": "45711f1af6eff1a6d010703b4862e0d2b9afd056",
      "tree": "3d0048f46e3df9d217d56127462ebe680348bd5a",
      "parents": [
        "78c2f0b8c285c5305b3e67b0595200541e15eb43"
      ],
      "author": {
        "name": "Jens Axboe",
        "email": "jens.axboe@oracle.com",
        "time": "Mon Oct 22 21:19:53 2007 +0200"
      },
      "committer": {
        "name": "Jens Axboe",
        "email": "jens.axboe@oracle.com",
        "time": "Mon Oct 22 21:19:53 2007 +0200"
      },
      "message": "[SG] Update drivers to use sg helpers\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n"
    },
    {
      "commit": "28424d3a503d43482a5537e556f7b7652d8e56d8",
      "tree": "cfdfea7e635461887b735610d00d15fc41e6d19a",
      "parents": [
        "dff6de73f9d29868729cb1d21d86ba0dbd28871f"
      ],
      "author": {
        "name": "Boaz Harrosh",
        "email": "bharrosh@panasas.com",
        "time": "Mon Sep 10 22:37:45 2007 +0300"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@mulgrave.localdomain",
        "time": "Fri Oct 12 14:55:07 2007 -0400"
      },
      "message": "[SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation\n\n  - Use new scsi_eh_prep/restor_cmnd() for synchronous\n    REQUEST_SENSE invocation.\n\nSigned-off-by: Boaz Harrosh \u003cbharrosh@panasas.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "cce99c6925b8d6a59cf584411277c1c20c330334",
      "tree": "513504b6a22be6cc9b7d6689cccb2a48ee6dd4cd",
      "parents": [
        "1d0c7c8dcf289557f13b6b0f6d71b6a03b12b747"
      ],
      "author": {
        "name": "Matthew Wilcox",
        "email": "matthew@wil.cx",
        "time": "Tue Sep 25 12:42:01 2007 -0400"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@mulgrave.localdomain",
        "time": "Fri Oct 12 14:52:04 2007 -0400"
      },
      "message": "[SCSI] Fix mistaken uses of -\u003edone\n\nAll these drivers meant to call -\u003escsi_done() but got confused.\n\nSigned-off-by: Matthew Wilcox \u003cwilly@linux.intel.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "bc06cffdec85d487c77109dffcd2f285bdc502d3",
      "tree": "adc6e6398243da87e66c56102840597a329183a0",
      "parents": [
        "d3502d7f25b22cfc9762bf1781faa9db1bb3be2e",
        "9413d7b8aa777dd1fc7db9563ce5e80d769fe7b5"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@woody.linux-foundation.org",
        "time": "Sun Jul 15 16:51:54 2007 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@woody.linux-foundation.org",
        "time": "Sun Jul 15 16:51:54 2007 -0700"
      },
      "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits)\n  [SCSI] ibmvscsi: convert to use the data buffer accessors\n  [SCSI] dc395x: convert to use the data buffer accessors\n  [SCSI] ncr53c8xx: convert to use the data buffer accessors\n  [SCSI] sym53c8xx: convert to use the data buffer accessors\n  [SCSI] ppa: coding police and printk levels\n  [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc\n  [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c\n  [SCSI] remove the dead CYBERSTORMIII_SCSI option\n  [SCSI] don\u0027t build scsi_dma_{map,unmap} for !HAS_DMA\n  [SCSI] Clean up scsi_add_lun a bit\n  [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs\n  [SCSI] sni_53c710: Cleanup\n  [SCSI] qla4xxx: Fix underrun/overrun conditions\n  [SCSI] megaraid_mbox: use mutex instead of semaphore\n  [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.\n  [SCSI] qla2xxx: update version to 8.02.00-k1.\n  [SCSI] qla2xxx: add support for NPIV\n  [SCSI] stex: use resid for xfer len information\n  [SCSI] Add Brownie 1200U3P to blacklist\n  [SCSI] scsi.c: convert to use the data buffer accessors\n  ...\n"
    },
    {
      "commit": "f8343685643f2901fe11aa9d0358cafbeaf7b4c3",
      "tree": "08cad541c6668d0372aa5c394792735dfdb06f30",
      "parents": [
        "632155e659449685b719995d7e7081cff7b01aba"
      ],
      "author": {
        "name": "Yoann Padioleau",
        "email": "padator@wanadoo.fr",
        "time": "Fri Jun 01 00:46:36 2007 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@woody.linux-foundation.org",
        "time": "Fri Jun 01 08:18:28 2007 -0700"
      },
      "message": "parse errors in ifdefs\n\nFix various bits of obviously-busted code which we\u0027re not happening to\ncompile, due to ifdefs.\n\nCc: \"Luck, Tony\" \u003ctony.luck@intel.com\u003e\nCc: Ivan Kokshaysky \u003cink@jurassic.park.msu.ru\u003e\nCc: Richard Henderson \u003crth@twiddle.net\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Ralf Baechle \u003cralf@linux-mips.org\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: Jan Kara \u003cjack@ucw.cz\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "702809ce9b1e91400826ec2ff203c06fdad36034",
      "tree": "fb8b9113d832ba8a67758c7275f9b2f8ab4d6ba8",
      "parents": [
        "476834c25a04025d895f64d42affcd31bfb318cc"
      ],
      "author": {
        "name": "Andrew Morton",
        "email": "akpm@linux-foundation.org",
        "time": "Wed May 23 14:41:56 2007 -0700"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@mulgrave.il.steeleye.com",
        "time": "Thu May 24 09:13:25 2007 -0500"
      },
      "message": "[SCSI] ncr5380 warning fixes\n\nsquish these:\n\ndrivers/scsi/NCR5380.c:360: warning: \u0027phases\u0027 defined but not used\ndrivers/scsi/NCR5380.c:360: warning: \u0027phases\u0027 defined but not used\ndrivers/scsi/NCR5380.c:633: warning: \u0027NCR5380_print_options\u0027 defined but not used\ndrivers/scsi/NCR5380.c:708: warning: \u0027NCR5380_proc_info\u0027 defined but not used\ndrivers/scsi/NCR5380.c:360: warning: \u0027phases\u0027 defined but not used\ndrivers/scsi/NCR5380.c:579: warning: \u0027NCR5380_probe_irq\u0027 defined but not used\ndrivers/scsi/NCR5380.c:360: warning: \u0027phases\u0027 defined but not used\ndrivers/scsi/NCR5380.c:708: warning: \u0027notyet_generic_proc_info\u0027 defined but not used\ndrivers/scsi/NCR5380.c:708: warning: \u0027notyet_generic_proc_info\u0027 defined but not used\n\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "730a646ddfea239aa9f6b732d5c10118f6801bc1",
      "tree": "b2f0c3895f5dc2fc4c5f8f4be3ee60b54bb947de",
      "parents": [
        "355dfa1bc8026d185678fed4e409719a595b2d39"
      ],
      "author": {
        "name": "Amol Lad",
        "email": "amol@verismonetworks.com",
        "time": "Wed May 23 14:41:37 2007 -0700"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@mulgrave.il.steeleye.com",
        "time": "Thu May 24 09:11:00 2007 -0500"
      },
      "message": "[SCSI] NCR5380: Replace yield() with a better alternative\n\nReplaced yield() with cond_resched()\n\nSigned-off-by: Amol Lad \u003camol@verismonetworks.com\u003e\nAcked-by: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "c4028958b6ecad064b1a6303a6a5906d4fe48d73",
      "tree": "1c4c89652c62a75da09f9b9442012007e4ac6250",
      "parents": [
        "65f27f38446e1976cc98fd3004b110fedcddd189"
      ],
      "author": {
        "name": "David Howells",
        "email": "dhowells@redhat.com",
        "time": "Wed Nov 22 14:57:56 2006 +0000"
      },
      "committer": {
        "name": "David Howells",
        "email": "dhowells@redhat.com",
        "time": "Wed Nov 22 14:57:56 2006 +0000"
      },
      "message": "WorkStruct: make allyesconfig\n\nFix up for make allyesconfig.\n\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\n"
    },
    {
      "commit": "7d12e780e003f93433d49ce78cfedf4b4c52adc5",
      "tree": "6748550400445c11a306b132009f3001e3525df8",
      "parents": [
        "da482792a6d1a3fbaaa25fae867b343fb4db3246"
      ],
      "author": {
        "name": "David Howells",
        "email": "dhowells@redhat.com",
        "time": "Thu Oct 05 14:55:46 2006 +0100"
      },
      "committer": {
        "name": "David Howells",
        "email": "dhowells@warthog.cambridge.redhat.com",
        "time": "Thu Oct 05 15:10:12 2006 +0100"
      },
      "message": "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers\n\nMaintain a per-CPU global \"struct pt_regs *\" variable which can be used instead\nof passing regs around manually through all ~1800 interrupt handlers in the\nLinux kernel.\n\nThe regs pointer is used in few places, but it potentially costs both stack\nspace and code to pass it around.  On the FRV arch, removing the regs parameter\nfrom all the genirq function results in a 20% speed up of the IRQ exit path\n(ie: from leaving timer_interrupt() to leaving do_IRQ()).\n\nWhere appropriate, an arch may override the generic storage facility and do\nsomething different with the variable.  On FRV, for instance, the address is\nmaintained in GR28 at all times inside the kernel as part of general exception\nhandling.\n\nHaving looked over the code, it appears that the parameter may be handed down\nthrough up to twenty or so layers of functions.  Consider a USB character\ndevice attached to a USB hub, attached to a USB controller that posts its\ninterrupts through a cascaded auxiliary interrupt controller.  A character\ndevice driver may want to pass regs to the sysrq handler through the input\nlayer which adds another few layers of parameter passing.\n\nI\u0027ve build this code with allyesconfig for x86_64 and i386.  I\u0027ve runtested the\nmain part of the code on FRV and i386, though I can\u0027t test most of the drivers.\nI\u0027ve also done partial conversion for powerpc and MIPS - these at least compile\nwith minimal configurations.\n\nThis will affect all archs.  Mostly the changes should be relatively easy.\nTake do_IRQ(), store the regs pointer at the beginning, saving the old one:\n\n\tstruct pt_regs *old_regs \u003d set_irq_regs(regs);\n\nAnd put the old one back at the end:\n\n\tset_irq_regs(old_regs);\n\nDon\u0027t pass regs through to generic_handle_irq() or __do_IRQ().\n\nIn timer_interrupt(), this sort of change will be necessary:\n\n\t-\tupdate_process_times(user_mode(regs));\n\t-\tprofile_tick(CPU_PROFILING, regs);\n\t+\tupdate_process_times(user_mode(get_irq_regs()));\n\t+\tprofile_tick(CPU_PROFILING);\n\nI\u0027d like to move update_process_times()\u0027s use of get_irq_regs() into itself,\nexcept that i386, alone of the archs, uses something other than user_mode().\n\nSome notes on the interrupt handling in the drivers:\n\n (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in\n     the input_dev struct.\n\n (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does\n     something different depending on whether it\u0027s been supplied with a regs\n     pointer or not.\n\n (*) Various IRQ handler function pointers have been moved to type\n     irq_handler_t.\n\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\n(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)\n"
    },
    {
      "commit": "1d6f359a2e06296418481239f8054a878f36e819",
      "tree": "e3ce0c69e4f34374f51f4e226374467ca80e3993",
      "parents": [
        "5d8c8a2e8edc63d8aef7656678f41c6c603f0443"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@linutronix.de",
        "time": "Sat Jul 01 19:29:42 2006 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Sun Jul 02 13:58:53 2006 -0700"
      },
      "message": "[PATCH] irq-flags: scsi: Use the new IRQF_ constants\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "d6e05edc59ecd79e8badf440c0d295a979bdfa3e",
      "tree": "50362161f69317242ab603c51a18a818a4c93285",
      "parents": [
        "f18190bd3407554ba6df30a1927e07e6cba93e56"
      ],
      "author": {
        "name": "Andreas Mohr",
        "email": "andi@lisas.de",
        "time": "Mon Jun 26 18:35:02 2006 +0200"
      },
      "committer": {
        "name": "Adrian Bunk",
        "email": "bunk@stusta.de",
        "time": "Mon Jun 26 18:35:02 2006 +0200"
      },
      "message": "spelling fixes\n\nacquired (aquired)\ncontiguous (contigious)\nsuccessful (succesful, succesfull)\nsurprise (suprise)\nwhether (weather)\nsome other misspellings\n\nSigned-off-by: Andreas Mohr \u003candi@lisas.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n"
    },
    {
      "commit": "5d5ff44fe6775ccb922fd1f7d478b2ba9ca95068",
      "tree": "d8569caefe1cb5ecced30929ef98d3e1fe642425",
      "parents": [
        "e4a082c7c1f9a7b11fece6918e7ee5519b39ac46"
      ],
      "author": {
        "name": "Christoph Hellwig",
        "email": "hch@lst.de",
        "time": "Sat Jun 03 13:21:13 2006 +0200"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@mulgrave.il.steeleye.com",
        "time": "Tue Jun 06 11:07:25 2006 -0400"
      },
      "message": "[SCSI] fix up request buffer reference in various scsi drivers\n\nVarious scsi drivers use scsi_cmnd.buffer and scsi_cmnd.bufflen in their\nqueuecommand functions.  Those fields are internal storage for the\nmidlayer only and are used to restore the original payload after\nrequest_buffer and request_bufflen have been overwritten for EH.  Using\nthe buffer and bufflen fields means they do very broken things in error\nhandling.\n\nSigned-off-by: Christoph Hellwig \u003chch@lst.de\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "1abfd370134553f3b47e3e40a0526e05001409c2",
      "tree": "44653f5df309634cfdf347dcf1ec961667721101",
      "parents": [
        "410ca5c7c6ed08bda165e8137bff26c3fbee5a1b"
      ],
      "author": {
        "name": "Matthew Wilcox",
        "email": "matthew@wil.cx",
        "time": "Thu Dec 15 16:22:01 2005 -0500"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@mulgrave.(none)",
        "time": "Thu Dec 15 18:41:27 2005 -0800"
      },
      "message": "[SCSI] Rename scsi_print_msg to spi_print_msg\n\nRename scsi_print_msg to spi_print_msg and move its prototype from\nscsi_dbg.h to scsi_transport_spi.h\n\nSigned-off-by: Matthew Wilcox \u003cmatthew@wil.cx\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "a9a3047dd8ae43ff24caae5ec733a93df129568e",
      "tree": "c69433a7a4a5f43ecb440e173284026b0d42d9fe",
      "parents": [
        "6521018d4bf9522b4de47254ea15e8c1be1ec00f"
      ],
      "author": {
        "name": "Nishanth Aravamudan",
        "email": "nacc@us.ibm.com",
        "time": "Mon Nov 07 01:01:20 2005 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Mon Nov 07 07:53:59 2005 -0800"
      },
      "message": "[PATCH] drivers/scsi: fix-up schedule_timeout() usage\n\nUse schedule_timeout_uninterruptible() instead of\nset_current_state()/schedule_timeout() to reduce kernel size.\n\nSigned-off-by: Nishanth Aravamudan \u003cnacc@us.ibm.com\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "422c0d61d591cbfb70f029e13505fb437e169d68",
      "tree": "ebafa14e1c1564ddf263868c3b6907642a8fdf1e",
      "parents": [
        "017560fca496f72ed9dd734ffde63ce39dfe0411"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jgarzik@pobox.com",
        "time": "Mon Oct 24 18:05:09 2005 -0400"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@mulgrave.(none)",
        "time": "Fri Oct 28 21:10:16 2005 -0500"
      },
      "message": "[SCSI] use scmd_id(), scmd_channel() throughout code\n\nWrap a highly common idiom.  Makes the code easier to read, helps pave\nthe way for sdev-\u003e{id,channel} removal, and adds a token that can easily\nby grepped-for in the future.\n\nThere are a couple sdev_id() and scmd_printk() updates thrown in as well.\n\nRejections fixed up and\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "017560fca496f72ed9dd734ffde63ce39dfe0411",
      "tree": "e63ae9a28fc179e715eda32f12aaec4ca752651b",
      "parents": [
        "3bf743e7c891d8be8295650b7a6a9b5af083b096"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jgarzik@pobox.com",
        "time": "Mon Oct 24 18:04:36 2005 -0400"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@mulgrave.(none)",
        "time": "Fri Oct 28 21:04:15 2005 -0500"
      },
      "message": "[SCSI] use sfoo_printk() in drivers\n\nRejections fixed up and\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "f566a576bca09de85bf477fc0ab2c8c96405b77b",
      "tree": "ed4ae0c7a3592841367d486e867e43c82a83a5da",
      "parents": [
        "7a3ca7d2b5ec31b2cfa594b961d77e68075e33c7"
      ],
      "author": {
        "name": "Randy Dunlap",
        "email": "rdunlap@xenotime.net",
        "time": "Sun Oct 02 17:15:29 2005 -0700"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@mulgrave.(none)",
        "time": "Sun Oct 16 11:50:21 2005 -0500"
      },
      "message": "[SCSI] NCR5380: fix undefined preprocessor identifier\n\nFix 12 undefined preprocessor identifier warnings (4 each in 3 driver builds):\ndrivers/scsi/NCR5380.c:2744:16: warning: undefined preprocessor identifier \u0027NDEBUG_ABORT\u0027\ndrivers/scsi/NCR5380.c:2744:16: warning: \"NDEBUG_ABORT\" is not defined\n\nSigned-off-by: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "185a7a1cd79b9891e3c17abdb103ba1c98d6ca7a",
      "tree": "d508b095ce7a5e9a85266203472301b759467011",
      "parents": [
        "f20badbe1207bb10a8ad5fdadc2131c94344b5d9"
      ],
      "author": {
        "name": "viro@ZenIV.linux.org.uk",
        "email": "viro@ZenIV.linux.org.uk",
        "time": "Wed Sep 07 23:18:24 2005 +0100"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Wed Sep 07 17:17:33 2005 -0700"
      },
      "message": "[PATCH] -Wundef fixes (ncr5380)\n\nNDEBUG and NDEBUG_ABORT are almost always used as integers in NCR5380; added\ndefine to 0 if they are not defined, switched lone ifdef NDEBUG into if.\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "68b3aa7c9805aee9005a8ca53c5e99177961fbb9",
      "tree": "3f28891df0b3a1ecdfe6a98547d8f3c43b74e905",
      "parents": [
        "94d0e7b805961c44e4dc486ffc21075084bb7175"
      ],
      "author": {
        "name": "Jeff Garzik ",
        "email": "jgarzik@pobox.com",
        "time": "Sat May 28 07:56:31 2005 -0400"
      },
      "committer": {
        "name": "Jeff Garzik ",
        "email": "jgarzik@pobox.com",
        "time": "Fri Jun 17 12:05:10 2005 -0500"
      },
      "message": "[SCSI] allow sleeping in -\u003eeh_bus_reset_handler()\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "3471c288036bf0835a82d0b1bbce2002f6e68390",
      "tree": "9a646a16877b7c600c583a32f703dd02a621c603",
      "parents": [
        "e3df715501be3329986e5d9dfa9a477f49e7996b"
      ],
      "author": {
        "name": "Jeff Garzik ",
        "email": "jgarzik@pobox.com",
        "time": "Sat May 28 07:52:51 2005 -0400"
      },
      "committer": {
        "name": "Jeff Garzik ",
        "email": "jgarzik@pobox.com",
        "time": "Fri Jun 17 12:04:45 2005 -0500"
      },
      "message": "[SCSI] Remove no-op implementations of SCSI EH hooks\n\nDrivers need not implement a hook that returns FAILED, and does nothing\nelse, since the SCSI midlayer code will do that for us.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "db9dff366ba78085d0323364fadbf09bec0e77ee",
      "tree": "ae86a60cf83c3d897f9488e90fca4b36cd545a1a",
      "parents": [
        "b6651129cc27d56a9cbefcb5f713cea7706fd6b7"
      ],
      "author": {
        "name": "",
        "email": "hch@lst.de",
        "time": "Sun Apr 03 14:53:59 2005 -0500"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "jejb@titanic",
        "time": "Mon Apr 18 12:32:20 2005 -0500"
      },
      "message": "[PATCH] remove outdated print_* functions\n\nWe have the scsi_print_* functions in the proper namespace for a long\ntime now and there weren\u0027t a lot users left.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}
