)]}' { "log": [ { "commit": "4ab3d50224e35811b3351c28e63057595e8406e6", "tree": "ccd1a729543defa03df97f0dc0b416f53c793dcc", "parents": [ "a36223b0dc14606b5c80aacbbe6288133693a841" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:43 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:43 2008 +0200" }, "message": "ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify()\n\nSet IDE_AFLAG_DRQ_INTERRUPT in do_identify() instead of ATAPI\ndevice drivers *_setup() methods.\n\nWhile at it:\n- use ata_id_cdb_intr()\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0ae4b3199ab1b6d511c6e0948e92049c272a346a", "tree": "73840e552453e1ef260de880aa8214a65227aa57", "parents": [ "c39220483ebe6871fb129d4b2236cd95290c41fc" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "message": "ide: remove superfluous -\u003emedia field from ide_driver_t\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "97100fc816badbbc162644cfde7ad39ae9211fb4", "tree": "904faf5453c2dea32fa3fde5fda230118f3effda", "parents": [ "be3c096ebdbe3c828aacb5473751a22840753eff" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:36 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:36 2008 +0200" }, "message": "ide: add device flags\n\nAdd \u0027unsigned long dev_flags\u0027 to ide_drive_t and convert bitfields\nto IDE_DFLAG_* flags.\n\nWhile at it:\n- IDE_DFLAG_ADDRESSING -\u003e IDE_DFLAG_LBA48\n- fixup some comments\n- remove needless g-\u003eflags zeroing from ide*_probe()\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "baf08f0be6d986521bb2fbdc7af51fc4847da734", "tree": "5ac765703ad79edeafc6eec39fe42850bd6b5dc6", "parents": [ "aa5d2de7b080873f6d9ac3aede423c9713bf0caa" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: make ide_transfer_pc() static\n\n* Move -\u003eticks field from struct ide_floppy_obj to ide_drive_t.\n\n* Move idefloppy_transfer_pc() to ide-atapi.c and make\n ide_transfer_pc() use it.\n\n* Always use ide_transfer_pc as a handler in ide_issue_pc().\n\n* Remove no longer used idefloppy_start_pc_transfer(),\n ide*_transfer_pc() and \u0027handler\u0027 argument from ide_issue_pc().\n\n* Make ide_transfer_pc() static.\n\nWhile at it:\n\n* idefloppy_transfer_pc() -\u003e ide_delayed_transfer_pc()\n\n* IDEFLOPPY_TICKS_DELAY -\u003e IDEFLOPPY_PC_DELAY\n\n* -\u003eticks -\u003e -\u003epc_delay\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aa5d2de7b080873f6d9ac3aede423c9713bf0caa", "tree": "babf0dbf6a7d7e545053736e5ae6976faddabfd7", "parents": [ "85e39035ca381846b031690f4d1ac1f0660da0a2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: make ide_pc_intr() static\n\n* Always use ide_pc_intr as a handler in ide_pc_intr().\n\n* Remove no longer used ide*_pc_intr() and \u0027handler\u0027\n argument from ide_{transfer_pc,pc_intr}().\n\n* Make ide_pc_intr() static.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "85e39035ca381846b031690f4d1ac1f0660da0a2", "tree": "ebdf6b4b173e3e11ce876b8b7b91651a60945f91", "parents": [ "6b0da28b2d0f4f4e2c55689fc062db569075ff60" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: add -\u003epc_{update,io}_buffers methods\n\nAdd -\u003epc_{update,io}_buffers methods to ide_drive_t and use\nthem instead of {update,io}_buffers ide_pc_intr() arguments.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6b0da28b2d0f4f4e2c55689fc062db569075ff60", "tree": "e7113f6db70fe3c2dd16bd2e7e1538fba4236c49", "parents": [ "67c56364df843fb9e3ed1af014b8fbe4b22ff25d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: add ide_retry_pc() helper\n\n* Add ide_create_request_sense_cmd() and ide_retry_pc() helpers\n and convert ide-{atapi,floppy,tape}.c to use them.\n\n* Remove no longer used ide*_create_request_sense_cmd(),\n ide*_retry_pc() and \u0027retry_pc\u0027 argument from ide_pc_intr().\n\n* Make ide_queue_pc_head() static.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "844b9468523c8c2c45b90df4efcabcbe4926b5ab", "tree": "64d239e810c6f143f6d3206fc37200af47f9eee0", "parents": [ "2b9efba48283f34083df6bc53f6752fba4e4d409" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:31 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:31 2008 +0200" }, "message": "ide: drop \u0027timeout\u0027 and \u0027expiry\u0027 arguments from ide_pc_intr()\n\n* Move idescsi_expiry() to ide-atapi.c.\n\n* Move get_timeout() to \u003clinux/ide.h\u003e.\n\n* Drop \u0027timeout\u0027 and \u0027expiry\u0027 arguments from ide_pc_intr().\n\nWhile at it:\n\n* idescsi_expiry() -\u003e ide_scsi_expiry()\n\n* get_timeout() -\u003e ide_scsi_get_timeout()\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2b9efba48283f34083df6bc53f6752fba4e4d409", "tree": "215d86f1934c896f8ec609ab033b69bf5b99e217", "parents": [ "b14c72127fbe8f97e49de7437520175673f7306a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:31 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:31 2008 +0200" }, "message": "ide: add pointer to the current packet command to ide_drive_t\n\n* Add pointer to the current packet command (struct ide_atapi_pc *pc)\n to ide_drive_t and use it instead of the pointer in struct ide_*_obj.\n\n* Use drive-\u003epc in ide_{issue,transfer}_pc() and ide_pc_intr()\n instead of \u0027pc\u0027 argument.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b14c72127fbe8f97e49de7437520175673f7306a", "tree": "7cf54dd800cbb004cd44a947f2a4530fe132a26b", "parents": [ "9b5a18e19f8c610c270ee9a0ba03177d737f6aa5" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:30 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:30 2008 +0200" }, "message": "ide: drop dsc_handle argument from ide_pc_intr()\n\n* Add \u0027int dsc\u0027 argument to -\u003epc_callback method.\n\n* Call ide_tape_handle_dsc() internally in ide_tape_callback()\n if dsc argument is set and update ide_pc_intr() accordingly.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "92f1f8fd8040e7b50a67a850a935509bb01201bb", "tree": "df27468982bc64f0a6fdc54f05153e382ca63a1b", "parents": [ "d6e2955a6b82d2312b5ff885ce13c8ab54d59d96" ], "author": { "name": "Elias Oltmanns", "email": "eo@nebensachen.de", "time": "Fri Oct 10 22:39:40 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:40 2008 +0200" }, "message": "ide: Remove ide_spin_wait_hwgroup() and use special requests instead\n\nUse a special request for serialisation purposes and get rid of the\nawkward ide_spin_wait_hwgroup(). This also involves converting the\nide_devset structure so it can be shared by the /proc and the ioctl code.\n\nSigned-off-by: Elias Oltmanns \u003ceo@nebensachen.de\u003e\n[bart: use rq-\u003ecmd[] directly]\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "acaa0f5f675ccf6b8a3a11a933419068b1ea1f46", "tree": "8afee71c69bf765a5edd0de82c98c6470905ec20", "parents": [ "c860f955681ebd83df4a03089f1910fc4b54651f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:36 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:36 2008 +0200" }, "message": "ide: add ide_io_buffers() helper\n\n* Make -\u003eio_buffers method return number of bytes transferred.\n\n* Use ide_end_request() instead of idefloppy_end_request()\n in ide_floppy_io_buffers() and then move the call out to\n ide_pc_intr().\n\n* Add ide_io_buffers() helper and convert ide-{floppy,scsi}.c\n to use it instead of ide*_io_buffers().\n\nThere should be no functional changes caused by this patch.\n\nAcked-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c860f955681ebd83df4a03089f1910fc4b54651f", "tree": "fe13b4bba7903747c5760d2bc2a1c7df2048fd90", "parents": [ "4de4b9e1405aef41d199dd20dbce7e9a5dbbf7bf" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:36 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:36 2008 +0200" }, "message": "ide-scsi: cleanup ide_scsi_io_buffers()\n\nPreparation for ide_{floppy,scsi}_io_buffers() unification.\n\nAcked-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "02d599a365d04658bc9ea71762ed17c895079927", "tree": "d6ea4634b2593ce1c71d66d869d1110c0ff3bbff", "parents": [ "ebc6be520673f65aef188abde43972f9cd2162e9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:29 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:29 2008 +0200" }, "message": "ide: remove -\u003esupports_dsc_overlap field from ide_driver_t\n\n* Use drive-\u003emedia and drive-\u003escsi to check if -\u003edsc_overlap\n can be set by HDIO_SET_NICE ioctl in generic_ide_ioctl().\n\n* Remove unused -\u003esupports_dsc_overlap field from ide_driver_t.\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8185d5aa93e0a5c111adc4952a5b87193a68ae5b", "tree": "431aeb09a448b7b07a353e12f4fe931ebb8555cd", "parents": [ "263138a0ad6e38de7f6526b7de037ed4511308ef" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:28 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:28 2008 +0200" }, "message": "ide: /proc/ide/hd*/settings rework\n\n* Add struct ide_devset, S_* flags, *DEVSET() \u0026 ide*_devset_*() macros.\n\n* Add \u0027const struct ide_devset **settings\u0027 to ide_driver_t.\n\n* Use \u0027const struct ide_devset **settings\u0027 in ide_drive_t instead of\n \u0027struct ide_settings_s *settings\u0027. Then convert core code and device\n drivers to use struct ide_devset and co.:\n\n - device settings are no longer allocated dynamically for each device\n but instead there is an unique struct ide_devset instance per setting\n\n - device driver keeps the pointer to the table of pointers to its\n settings in ide_driver_t.settings\n\n - generic settings are kept in ide_generic_setting[]\n\n - ide_proc_[un]register_driver(), ide_find_setting_by_name(),\n ide_{read,write}_setting() and proc_ide_{read,write}_settings()\n are updated accordingly\n\n - ide*_add_settings() are removed\n\n* Remove no longer used __ide_add_setting(), ide_add_setting(),\n __ide_remove_setting() and auto_remove_settings().\n\n* Remove no longer used TYPE_*, SETTING_*, ide_procset_t\n and ide_settings_t.\n\n* -\u003ekeep_settings, -\u003eusing_dma, -\u003eunmask, -\u003enoflush, -\u003edsc_overlap,\n -\u003enice1, -\u003eaddressing, -\u003ewcache and -\u003enowerr ide_drive_t fields\n can now be bitfield flags.\n\nWhile at it:\n\n* Rename ide_find_setting_by_name() to ide_find_setting().\n\n* Rename write_wcache() to set_wcache().\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1e874f448365b80e69b8a60b8b575b17f00811f3", "tree": "6a79a12ffdcaa12f5f89356527c1ab02014c751b", "parents": [ "3ceca727fe3a38dd8d7a3adf938fefda83eee8af" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "message": "ide: call ide_proc_register_driver() later\n\nCall ide_proc_register_driver() in ide*_setup() (just before\nide*_add_settings() call) instead of in -\u003eprobe method.\n\nDespite being basically a preparation for /proc/ide/hd*/settings\nrework this is a nice cleanup in itself.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3ceca727fe3a38dd8d7a3adf938fefda83eee8af", "tree": "61fb443f0e1a260110f63b23f236605677dd85a6", "parents": [ "7c51c17e0431d2f26bc23ee07de12eafb125ce83" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "message": "ide: include \u003clinux/hdreg.h\u003e only when needed\n\n* Include \u003clinux/ata.h\u003e directly in \u003clinux/ide.h\u003e\n instead of through \u003clinux/hdreg.h\u003e.\n\n* Include \u003clinux/hdreg.h\u003e only when needed.\n\nCc: Christoph Hellwig \u003chch@infradead.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2a924662b646fa25cb491d50aa1202a94aa4ac55", "tree": "9339ca9cbc1600149a91a6b0fa919ef0d3b6ec3d", "parents": [ "3cd5f1eae093a7d6ff8a63c746eba9d6f689ba91" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:24 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:24 2008 +0200" }, "message": "ide: remove needless drive-\u003epresent checks from device drivers\n\nRemove needless drive-\u003epresent checks from -\u003eprobe methods\n(device model takes care of that).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3a7d24841ad794ae64c90d7d00d62a83741912aa", "tree": "d71a36678fa88ed1e0b279390b6169f5018186bf", "parents": [ "f26b3d75959e9a0e43a2e1e1148c075592746c3d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:21 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:21 2008 +0200" }, "message": "ide: use ATA_* defines instead of *_STAT and *_ERR ones\n\n* ERR_STAT -\u003e ATA_ERR\n* INDEX_STAT -\u003e ATA_IDX\n* ECC_STAT -\u003e ATA_CORR\n* DRQ_STAT -\u003e ATA_DRQ\n* SEEK_STAT -\u003e ATA_DSC\n* WRERR_STAT -\u003e ATA_DF\n* READY_STAT -\u003e ATA_DRDY\n* BUSY_STAT -\u003e ATA_BUSY\n\n* MARK_ERR -\u003e ATA_AMNF\n* TRK0_ERR -\u003e ATA_TRK0NF\n* ABRT_ERR -\u003e ATA_ABORTED\n* MCR_ERR -\u003e ATA_MCR\n* ID_ERR -\u003e ATA_IDNF\n* MC_ERR -\u003e ATA_MC\n* ECC_ERR -\u003e ATA_UNC\n* ICRC_ERR -\u003e ATA_ICRC\n\n* BBD_ERR -\u003e ATA_BBK\n\nAlso:\n\n* ILI_ERR -\u003e ATAPI_ILI\n* EOM_ERR -\u003e ATAPI_EOM\n* LFS_ERR -\u003e ATAPI_LFS\n\n* CD -\u003e ATAPI_COD\n* IO -\u003e ATAPI_IO\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aaaade3f059fa1b57283d4a7c8351a42ec747bf0", "tree": "3c2e80f0317fc52d9866b0bb83b8cc89ed764b57", "parents": [ "a4f19040a3a6cd431efe0a10b9d2e8d5e3904865" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:21 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:21 2008 +0200" }, "message": "ide: WIN_* -\u003e ATA_CMD_*\n\n* Use ATA_CMD_* defines instead of WIN_* ones.\n\nWhile at it:\n\n* EXABYTE_ENABLE_NEXT -\u003e ATA_EXABYTE_ENABLE_NEST\n\n* SETFEATURES_{EN,DIS}_WCACHE -\u003e SETFEATURES_WC_{ON,OFF}\n\n* SETFEATURES_{EN,DIS}_AAM -\u003e SETFEATURES_AAM_{ON,OFF}\n\n* SMART_* -\u003e ATA_SMART_*\n\n* Remove stale comment from ide-proc.c.\n\nPartially based on earlier work by Chris Wedgwood.\n\nAcked-by: Chris Wedgwood \u003ccw@f00f.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4dde4492d850a4c9bcaa92e5bd7f4eebe3e2f5ab", "tree": "ee3be70390e4c617b44329edef0a05039f59c81a", "parents": [ "5b90e990928919ae411a68b865e8a6ecac09a603" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:19 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:19 2008 +0200" }, "message": "ide: make drive-\u003eid an union (take 2)\n\nMake drive-\u003eid an unnamed union so id can be accessed either by using\n\u0027u16 *id\u0027 or \u0027struct hd_driveid *driveid\u0027. Then convert all existing\ndrive-\u003eid users accordingly (using \u0027u16 *id\u0027 when possible).\n\nThis is an intermediate step to make ide \u0027struct hd_driveid\u0027-free.\n\nWhile at it:\n\n- Add missing KERN_CONTs in it821x.c.\n\n- Use ATA_ID_WORDS and ATA_ID_*_LEN defines.\n\n- Remove unnecessary checks for drive-\u003eid.\n\n- s/drive_table/table/ in ide_in_drive_list().\n\n- Cleanup ide_config_drive_speed() a bit.\n\n- s/drive1/dev1/ \u0026 s/drive0/dev0/ in ide_undecoded_slave().\n\nv2:\nFix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell)\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "242f9dcb8ba6f68fcd217a119a7648a4f69290e9", "tree": "1bfe245ffbc50d204d76665cd8f90d85100f86a1", "parents": [ "608aeef17a91747d6303de4df5e2c2e6899a95e8" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Sun Sep 14 05:55:09 2008 -0700" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:13 2008 +0200" }, "message": "block: unify request timeout handling\n\nRight now SCSI and others do their own command timeout handling.\nMove those bits to the block layer.\n\nInstead of having a timer per command, we try to be a bit more clever\nand simply have one per-queue. This avoids the overhead of having to\ntear down and setup a timer for each command, so it will result in a lot\nless timer fiddling.\n\nSigned-off-by: Mike Anderson \u003candmike@linux.vnet.ibm.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "d3e33ff59facec005e48ba3360502b73a04e4b4e", "tree": "7f5b6354d5d6794b35a5ea2bcee33ea16d8e326c", "parents": [ "b5b9309d3415480b3e66314a1d6c89db58bff9de" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Aug 05 18:16:59 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Aug 05 18:16:59 2008 +0200" }, "message": "ide: fix regression caused by ide_device_{get,put}() addition (take 2)\n\nOn Monday 28 July 2008, Benjamin Herrenschmidt wrote:\n\n[...]\n\n\u003e Vector: 300 (Data Access) at [c58b7b80]\n\u003e pc: c014f264: elv_may_queue+0x10/0x44\n\u003e lr: c0152750: get_request+0x2c/0x2c0\n\u003e sp: c58b7c30\n\u003e msr: 1032\n\u003e dar: c\n\u003e dsisr: 40000000\n\u003e current \u003d 0xc58aaae0\n\u003e pid \u003d 854, comm \u003d media-bay\n\u003e enter ? for help\n\u003e mon\u003e t\n\u003e [c58b7c40] c0152750 get_request+0x2c/0x2c0\n\u003e [c58b7c70] c0152a08 get_request_wait+0x24/0xec\n\u003e [c58b7cc0] c0225674 ide_cd_queue_pc+0x58/0x1a0\n\u003e [c58b7d40] c022672c ide_cdrom_packet+0x9c/0xdc\n\u003e [c58b7d70] c0261810 cdrom_get_disc_info+0x60/0xd0\n\u003e [c58b7dc0] c026208c cdrom_mrw_exit+0x1c/0x11c\n\u003e [c58b7e30] c0260f7c unregister_cdrom+0x84/0xe8\n\u003e [c58b7e50] c022395c ide_cd_release+0x80/0x84\n\u003e [c58b7e70] c0163650 kref_put+0x54/0x6c\n\u003e [c58b7e80] c0223884 ide_cd_put+0x40/0x5c\n\u003e [c58b7ea0] c0211100 generic_ide_remove+0x28/0x3c\n\u003e [c58b7eb0] c01e9d34 __device_release_driver+0x78/0xb4\n\u003e [c58b7ec0] c01e9e44 device_release_driver+0x28/0x44\n\u003e [c58b7ee0] c01e8f7c bus_remove_device+0xac/0xd8\n\u003e [c58b7f00] c01e7424 device_del+0x104/0x198\n\u003e [c58b7f20] c01e74d0 device_unregister+0x18/0x30\n\u003e [c58b7f40] c02121c4 __ide_port_unregister_devices+0x6c/0x88\n\u003e [c58b7f60] c0212398 ide_port_unregister_devices+0x38/0x80\n\u003e [c58b7f80] c0208ca4 media_bay_step+0x1cc/0x5c0\n\u003e [c58b7fb0] c0209124 media_bay_task+0x8c/0xcc\n\u003e [c58b7fd0] c00485c0 kthread+0x48/0x84\n\u003e [c58b7ff0] c0011b20 kernel_thread+0x44/0x60\n\nThe guilty commit turned out to be 08da591e14cf87247ec09b17c350235157a92fc3\n(\"ide: add ide_device_{get,put}() helpers\"). ide_device_put() is called\nbefore kref_put() in ide_cd_put() so IDE device is already gone by the time\nide_cd_release() is reached.\n\nFix it by calling ide_device_get() before kref_get() and ide_device_put()\nafter kref_put() in all affected device drivers.\n\nv2:\nBrown paper bag time. In v1 cd-\u003edrive was referenced after dropping last\nreference on cd object (which could result in OOPS in ide_device_put() as\nreported/debugged by Mariusz Kozlowski). Fix it by caching cd-\u003edrive in\nthe local variable (fix other device drivers too).\n\nReported-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nReported-by: Mariusz Kozlowski \u003cm.kozlowski@tuxland.pl\u003e\nCc: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nTested-by: Mariusz Kozlowski \u003cm.kozlowski@tuxland.pl\u003e\nTested-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e27420d046600cd3e4139ea1b6cba59a8b4050eb", "tree": "aaf60bb6c306d9c1bf75301a86465e7e63920ac3", "parents": [ "216f9a88feabf5ed574c3aa78447a6bd872910bc" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Thu Jul 24 22:53:35 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:35 2008 +0200" }, "message": "ide-scsi: remove kmalloced struct request\n\nThis converts ide-scsi to use blk_get/put_request instead of\nkmalloc/kfree.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "08da591e14cf87247ec09b17c350235157a92fc3", "tree": "d00a02154071c7013c31bc8dd1d3c12c86d5daca", "parents": [ "6cdf6eb357c2681596b7b1672b92396ba82333d4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:15 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jul 24 22:53:15 2008 +0200" }, "message": "ide: add ide_device_{get,put}() helpers\n\n* Add \u0027struct ide_host *host\u0027 field to ide_hwif_t and set it\n in ide_host_alloc_all().\n\n* Add ide_device_{get,put}() helpers loosely based on SCSI\u0027s\n scsi_device_{get,put}() ones.\n\n* Convert IDE device drivers to use ide_device_{get,put}().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "be4c916e96bcde629463d7577d4c402c7f6e6f3e", "tree": "8d9ec89cbd7118e38f6962d26b93e79ee10d0766", "parents": [ "f2e3ab52afb3b05879b9d82a05740cd924993325" ], "author": { "name": "Borislav Petkov", "email": "petkovbb@googlemail.com", "time": "Wed Jul 23 19:56:01 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:56:01 2008 +0200" }, "message": "ide-scsi: convert to using the new atapi_flags\n\nRemove unused IDESCSI_PC_RQ while at it.\n\nThere should be no functionality change resulting from this patch.\n\n[bart: IDE_FLAG_* -\u003e IDE_AFLAG_*, dev_flags -\u003e atapi_flags]\n\nSigned-off-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "08feacf3bcc20c33e6a2a91d85d8190dd219d967", "tree": "adf40b044b554ee33da8b4de9562c87c69bd6e9e", "parents": [ "0014c75be31d9fa7435105afa9960374a82cc55c" ], "author": { "name": "Borislav Petkov", "email": "petkovbb@googlemail.com", "time": "Wed Jul 23 19:56:00 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:56:00 2008 +0200" }, "message": "ide-scsi: pass packet command in rq-\u003ecmd\n\nMake a redundant copy of the packet command bits into rq-\u003ecmd.\nLater, after all drivers have been converted, it\u0027ll be\nswitched to use that in the common code instead of pc-\u003ec.\n\nThere should be no functionality change resulting from this patch.\n\nSigned-off-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "db9d286988b9e905045c536f681e85fa5e3a728b", "tree": "874144e07a0498c4d65dd9695f90056cbe45a1cb", "parents": [ "776bb0270ea72c40f95347dcac868c9f602dcb3e" ], "author": { "name": "Borislav Petkov", "email": "petkovbb@googlemail.com", "time": "Wed Jul 23 19:55:59 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:59 2008 +0200" }, "message": "ide-scsi: use drive-\u003epc_callback instead of pc-\u003ecallback\n\nThere should be no functionality change resulting from this patch.\n\nSigned-off-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "374e042c3e767ac2e5a40b78529220e0b3de793c", "tree": "433d258f6da9783f0cb34234af9c359353f531fe", "parents": [ "d6276b5f5cc7508124de291f3ed59c6945c17ae7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:56 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:56 2008 +0200" }, "message": "ide: add struct ide_tp_ops (take 2)\n\n* Add struct ide_tp_ops for transport methods.\n\n* Add \u0027const struct ide_tp_ops *tp_ops\u0027 to struct ide_port_info\n and ide_hwif_t.\n\n* Set the default hwif-\u003etp_ops in ide_init_port_data().\n\n* Set host driver specific hwif-\u003etp_ops in ide_init_port().\n\n* Export ide_exec_command(), ide_read_status(), ide_read_altstatus(),\n ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}()\n and ata_{in,out}put_data().\n\n* Convert host drivers and core code to use struct ide_tp_ops.\n\n* Remove no longer needed default_hwif_transport().\n\n* Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops.\n\nWhile at it:\n\n* Use struct ide_port_info in falconide.c and q40ide.c.\n\n* Rename ata_{in,out}put_data() to ide_{in,out}put_data().\n\nv2:\n\n* Fix missing convertion in ns87415.c.\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b73c7ee25da6133f97f47ffd3557288417da7c76", "tree": "0d348c81294d246b8417aff6e24502c93b312505", "parents": [ "c6dfa867bb45f4bff2e48f3bc89ab1d6a7ab4c21" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:52 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:52 2008 +0200" }, "message": "ide: add -\u003eread_status method\n\n* Remove ide_read_status() inline helper.\n\n* Add -\u003eread_status method for reading ATA Status register\n and use it instead of -\u003eINB.\n\nWhile at it:\n\n* Don\u0027t use HWGROUP() macro.\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c6dfa867bb45f4bff2e48f3bc89ab1d6a7ab4c21", "tree": "54d9322fad75e48fb548e182fbb87d06a06cd048", "parents": [ "ebb00fb55d0566bb3e81518122a57b4b3bedf1e4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:51 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 23 19:55:51 2008 +0200" }, "message": "ide: add -\u003eexec_command method\n\nAdd -\u003eexec_command method for writing ATA Command register\nand use it instead of -\u003eOUTBSYNC.\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3ef5eb424ebf0cd981192a416358fd707a9f959b", "tree": "12b255c4b62c0cbd7b0ce1fb3c6c6ece0d81d60d", "parents": [ "79e36a9f54aaf4a52eb2d9520953aa3960e99294" ], "author": { "name": "Elias Oltmanns", "email": "eo@nebensachen.de", "time": "Wed Jul 16 20:33:48 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Jul 16 20:33:48 2008 +0200" }, "message": "IDE: Remove unused code\n\nRemove some code which has been made obsolete and hasn\u0027t worked properly\nbefore anyway. Part of the infrastructure may be reintroduced in a\nfollow up patch to implement a working command aborting facility.\n\nSigned-off-by: Elias Oltmanns \u003ceo@nebensachen.de\u003e\nCc: \"Alan Cox\" \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \"Randy Dunlap\" \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "646c0cb6c430f8d3ad3769dd1518fe664ff0ce27", "tree": "4e02a6ffe70aceeb36093534845f3308c81a11b5", "parents": [ "55d82bfa6763d6761670d740ab3bac2f1c042d87" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:03 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:03 2008 +0200" }, "message": "ide: add ide_pc_intr() helper\n\n* ide-tape.c: add \u0027drive\u0027 argument to idetape_update_buffers().\n\n* Add generic ide_pc_intr() helper to ide-atapi.c and then\n convert ide-{floppy,tape,scsi} device drivers to use it.\n\n* ide-tape.c: remove no longer needed DBG_PC_INTR.\n\nThere should be no functional changes caused by this patch\n(unless the debugging is explicitely compiled in).\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "55d82bfa6763d6761670d740ab3bac2f1c042d87", "tree": "dd5e13c6c4801a4853ee0ce5f11469ab05ba6c31", "parents": [ "cdca5c1f3b769eb2cdfc9cadc254cb74ba73c7d6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:03 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:03 2008 +0200" }, "message": "ide-{floppy,scsi}: read Status Register before stopping DMA engine\n\nRead Status Register before stopping DMA engine to match ide-tape\ndevice driver - it should be safe and shouldn\u0027t affect anything.\n\nThis is a preparation for adding generic ide_pc_intr() helper.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cdca5c1f3b769eb2cdfc9cadc254cb74ba73c7d6", "tree": "3fb425069ab22632d5497e558d2864e444a2fa0d", "parents": [ "c6b2d260b5a7a5ed32aa2ce370d81183fc37eeb1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:02 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:02 2008 +0200" }, "message": "ide-scsi: add more debugging to idescsi_pc_intr()\n\nAdd more debugging to idescsi_pc_intr() to match ide-tape\u0027s\nidetape_pc_intr().\n\nWhile at it:\n\n* Correct the first debug message.\n\nThis is a preparation for adding generic ide_pc_intr() helper.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c6b2d260b5a7a5ed32aa2ce370d81183fc37eeb1", "tree": "806a4770acce66ee15f7af626caa36d040d73338", "parents": [ "4c93067ea9e5eca9d975bec74dae641228ac1bbe" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:02 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:02 2008 +0200" }, "message": "ide-scsi: use pc-\u003ecallback\n\n* Add ide_scsi_callback() pc-\u003ecallback implementation, then update\n idescsi_check_condition() and idescsi_queue() to setup -\u003ecallback.\n\n* Convert idescsi_pc_intr() to use pc-\u003ecallback.\n\nThis is a preparation for adding generic ide_pc_intr() helper.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6bf1641ca1c7554f0da54aaf89788731b541bacc", "tree": "ce7c371971e68b650d87e67935e460c948f4cb20", "parents": [ "28c7214bd8c2bbd4873b8f1e7f58d86d3731124f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:00 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:22:00 2008 +0200" }, "message": "ide: add ide_issue_pc() helper\n\nAdd generic ide_issue_pc() helper to ide-atapi.c and then\nconvert ide-{floppy,tape,scsi} device drivers to use it.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "28c7214bd8c2bbd4873b8f1e7f58d86d3731124f", "tree": "224d9b798a73a3b5d0d8de204a6e9465a37c4104", "parents": [ "4cc196897de9e6c02cf86debc5b9f7cf1b69a214" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:59 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:59 2008 +0200" }, "message": "ide: add PC_FLAG_DRQ_INTERRUPT pc flag\n\nAdd PC_FLAG_DRQ_INTERRUPT pc flag, set it in ide*_do_request()\nand check for it (instead of checking for IDE*_FLAG_DRQ_INTERRUPT)\nin ide*_issue_pc(). This is a preparation for adding generic\nide_issue_pc() helper.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4cc196897de9e6c02cf86debc5b9f7cf1b69a214", "tree": "70aebe4c447f6ce48ff10909779382000fd8b6da", "parents": [ "594c16d8dd54cd7b1c5ef1ec3ac0f6bf34301dad" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:58 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:58 2008 +0200" }, "message": "ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc()\n\nMove idescsi_map_sg() call out from idescsi_issue_pc()\nto idescsi_do_request() as a preparation to adding generic\nide_issue_pc() helper.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "594c16d8dd54cd7b1c5ef1ec3ac0f6bf34301dad", "tree": "4891a8ab4e998ba00db51e4672da64fd83663002", "parents": [ "f83cbc77b0d5521b4f0f591ede4870316944481a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:58 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:58 2008 +0200" }, "message": "ide: add ide_transfer_pc() helper\n\n* Add ide-atapi.c file for generic ATAPI support together with\n CONFIG_IDE_ATAPI config option.\n\n* Add generic ide_transfer_pc() helper to ide-atapi.c and then\n convert ide-{floppy,tape,scsi} device drivers to use it.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f83cbc77b0d5521b4f0f591ede4870316944481a", "tree": "e62b34fbcf381af7bc472129c980246c52f6ccb8", "parents": [ "794cc6804bb946826b7427d205ac391a5370d361" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:58 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:58 2008 +0200" }, "message": "ide-scsi: set drive-\u003escsi flag for devices handled by the driver\n\nThis is a preparation for adding generic ide_transfer_pc() helper.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "568ca92774d2f6be4a7e2f8357559bfdc9424056", "tree": "bde2cd61eafb613124923a6e57de91f0d0e4f016", "parents": [ "0b2eea4c5594ceaf13c57eaff7ff226263f1c36f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:54 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:54 2008 +0200" }, "message": "ide-{floppy,tape,scsi}: log device name instead of driver name\n\nLog device name instead of driver name in *_pc_intr() and *_transfer_pc*().\n\nWhile at it:\n\n* Merge two consecutive printk()-s in *_pc_intr() together.\n\n* Replace \"floppy\"/\"tape\"/\"scsi\" references in printk()-s by \"device\".\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "43a2b5b29385a3e0997a47c86f286d3645e5cb44", "tree": "f590ec553fc54db04bdf3178518c52196bee304e", "parents": [ "c8c51129805c0efb32f34afd3af8fe94f5757363" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:52 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:52 2008 +0200" }, "message": "ide-scsi: add debug_log() macro\n\nAdd debug_log() macro and convert the driver to use it.\n\n[ This makes debug messages to be always prefixed with \"ide-scsi: \"\n and use KERN_INFO level. ]\n\nWhile at it:\n\n* Change \"DMA complete\" debug message to \"DMA finished\" to match\n other ATAPI device drivers.\n\n* Use __func__.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c8c51129805c0efb32f34afd3af8fe94f5757363", "tree": "8aa6ddbb78a79cadc1fc8d561a45fa05a02822ac", "parents": [ "3e52fb4d1f4cc9630422982b6c5fa571e30f9889" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:52 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:52 2008 +0200" }, "message": "ide-scsi: remove superfluous BUG_ON() from idescsi_transfer_pc()\n\nide_set_handler() bugs on -\u003ehandler \u003d\u003d NULL so no need to do it\nin idescsi_transfer_pc().\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3e52fb4d1f4cc9630422982b6c5fa571e30f9889", "tree": "9e5f9509b1755255ac6f4684b3d5c1710a89369c", "parents": [ "6c60bd8ea7aa536d67830bc8384ef0ebdfb8aad4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:52 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:52 2008 +0200" }, "message": "ide-scsi: merge idescsi_input_buffers() and idescsi_output_buffers()\n\n* Merge idescsi_input_buffers() and idescsi_output_buffers()\n into ide_scsi_io_buffers() helper.\n\nWhile at it:\n\n* Log device name instead of driver name on error.\n\n* Use xfer_func_t.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6c60bd8ea7aa536d67830bc8384ef0ebdfb8aad4", "tree": "6e6cb8fe2b80ef19e4e48ad6fefeba6909cbffa3", "parents": [ "c04bbc812b05b304a9118687d0e0a47e35f00d1d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:52 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:52 2008 +0200" }, "message": "ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr()\n\nSet PC_FLAG_WRITING pc flag in idescsi_queue() (if needed)\nand then fix Interrupt Reason checking in idescsi_pc_intr().\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c04bbc812b05b304a9118687d0e0a47e35f00d1d", "tree": "62a76e3a893cbec2aeee1fc01fd716f9fdc64fbc", "parents": [ "e8e25f03e19c2c47834c821511625c0b80567827" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:51 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:51 2008 +0200" }, "message": "ide-scsi: fix handling of DMA errors in idescsi_pc_intr()\n\nCheck return value of -\u003edma_end method and if there was a DMA error\nhandle it accordingly (set PC_FLAG_DMA_ERROR pc flag, don\u0027t update\npc-\u003exferred and increase rq-\u003eerrors).\n\nAlso move debug message in the right place while at it.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e8e25f03e19c2c47834c821511625c0b80567827", "tree": "1dfdfe2f3be1165352299100329d1e77b9508fa7", "parents": [ "b3d96afccf8b5c67b66a61efb88c53ff029c6611" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:51 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:51 2008 +0200" }, "message": "ide-scsi: fix DRQ checking for DMA transfers in idescsi_pc_intr()\n\nIf DRQ bit of Status Register is not cleared it is an error condition\nand should be handled accordingly (disable DMA + reset the device).\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b3d96afccf8b5c67b66a61efb88c53ff029c6611", "tree": "879275e500e2f0ac597252996a71a19d73cd6b90", "parents": [ "63f5abb0959337db0d5bece9cefba03cdcadec51" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:51 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:51 2008 +0200" }, "message": "ide-scsi: fix race in idescsi_transfer_pc()\n\nStart DMA engine before sending content of packet command (otherwise\nit is possible that IRQ will happen before DMA engine is started).\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "63f5abb0959337db0d5bece9cefba03cdcadec51", "tree": "908862cbb739d6571fab4b24f264d4d3671e6400", "parents": [ "7e12ca11d65f4cb29ed58ea3948f8c5d4f57b35e" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Jul 15 21:21:51 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:51 2008 +0200" }, "message": "ide: remove action argument in ide_do_drive_cmd\n\nide_do_drive_cmd is called only with ide_preempt action argument. So\nwe can remove the action argument in ide_do_drive_cmd and ide_action_t\ntypedef.\n\nThis patch also includes two minor cleanups: 1) ide_do_drive_cmd\nalways succeeds so we don\u0027t need the return value; 2) the callers use\nblk_rq_init before ide_do_drive_cmd so there is no need to initialize\nrq-\u003eerrors.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7e12ca11d65f4cb29ed58ea3948f8c5d4f57b35e", "tree": "425d4b7dcb1ed97def498cb0f5dc28d57bf2ac9e", "parents": [ "ff07488346702f554aaeb6aae982540aa0302373" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Jul 15 21:21:50 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:50 2008 +0200" }, "message": "ide-scsi: replace ide_do_drive_cmd with blk_execute_rq_nowait\n\nAll the callers of ide_do_drive_cmd() except for ide-scsi use\nide_preempt action argument. This converts ide-scsi to use\nblk_execute_rq_nowait instead of ide_do_drive_cmd so that we can\nremove the action argument in ide_do_drive_cmd and ide_action_t\ntypedef.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f8c4bd0ab2b8783c0f080957781e9f70bee48eaa", "tree": "b082fb55336f996b56c95d15072b1b4629b1ba12", "parents": [ "135721446144af005109c25eeacca4fdddcd9a66" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:49 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:49 2008 +0200" }, "message": "ide: pass \u0027hwif *\u0027 instead of \u0027drive *\u0027 to -\u003eOUTBSYNC method\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9a410e79b552bacb4481f85618aa7333b7776ed7", "tree": "9a6668d9edb84710c284185d6f860c4361df6ef6", "parents": [ "e81a3bde13343bc36613aff8f864def7171b376a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:48 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:48 2008 +0200" }, "message": "ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flag\n\nAlways call SELECT_MASK(..., 0) in ide_tf_load() (needs to be done\nto match ide_set_irq(..., 1)) and then remove IDE_TFLAG_NO_SELECT_MASK\ntaskfile flag.\n\nThis change should only affect hpt366 and icside host drivers since\n-\u003emaskproc(..., 0) for sgiioc4 is equivalent to ide_set_irq(..., 1).\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "124cafc5eb973e748c4ce3dc1caad29274e64613", "tree": "aba8bd1322d15a80a92711980d7c89f702ea7703", "parents": [ "5f2e1ceef45ac07d7c52d16de2531a56c453bb0f" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Jul 15 21:21:44 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:44 2008 +0200" }, "message": "ide: remove ide_init_drive_cmd\n\nide_init_drive_cmd just calls blk_rq_init. This converts the users of\nide_init_drive_cmd to use blk_rq_init directly and removes\nide_init_drive_cmd.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e8a96aa71355edef9f40ce01459acf25c50cb78c", "tree": "bb9ffe53be3405e4df9e38c815999c77202b8a88", "parents": [ "5d0cc8ae29b310ceb6516a6840ca22738aab7820" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:41 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 15 21:21:41 2008 +0200" }, "message": "ide: set REQ_PREEMPT request flag in ide_do_drive_cmd() users\n\n* Set REQ_PREEMPT request flag in ide_do_drive_cmd() users\n for ide_preempt and ide_head_wait action types.\n\n* Remove setting REQ_PREEMPT from ide_do_drive_cmd().\n\nWhile at it:\n\n* Set \u0027where\u0027 variable outside ide_lock.\n\nThis is a preparation for converting IDE to use blk_execute_rq().\n\nThere should be no functional changes caused by this patch.\n\nCc: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9f87abe892f899f19df8d472f937ee955cd6264b", "tree": "f42dda5a9c12c043e3190de7dd43b0cee8e00c8b", "parents": [ "7c0daf2681f140dd9f39cd95966f471b5c904d8a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:41 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:41 2008 +0200" }, "message": "ide: add ide_pad_transfer() helper\n\n* Add ide_pad_transfer() helper (which uses -\u003e{in,out}put_data methods\n internally so the transfer is also padded to drive+host requirements)\n and use it instead of ide_atapi_{write_zeros,discard_data}().\n\n* Remove no longer needed ide_atapi_{write_zeros,discard_data}().\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1fc142589e58b20a67582974b8848595a2c7432e", "tree": "79b2006e761c70876d66a735fb30036cefb3f3e9", "parents": [ "3910dde6410e742f8bd3f516ee9b1a7114abbad0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:39 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:39 2008 +0200" }, "message": "ide: add ide_execute_pkt_cmd() helper\n\nAdd ide_execute_pkt_cmd() helper for executing PACKET command,\nthen convert ATAPI device drivers to use it.\n\nAs a nice side-effect this fixes ide-{floppy,tape,scsi} w.r.t.\nide_lock taking (ide-cd was OK).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3910dde6410e742f8bd3f516ee9b1a7114abbad0", "tree": "5829d1e279f9a4e904ddcffead2e9520c938c889", "parents": [ "32b3fe4fff0974d823a0c0d17d7b25690ecd5fc8" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:39 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:39 2008 +0200" }, "message": "ide-{floppy,tape,scsi}: 400ns delay is required after executing the command\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "32b3fe4fff0974d823a0c0d17d7b25690ecd5fc8", "tree": "ede5f596c0770c206b6d75a9794fdb55b07aab93", "parents": [ "24cc434acc2b3aaf70eba4ba20890eca5fcfa686" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:38 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:38 2008 +0200" }, "message": "ide: always use -\u003eOUTBSYNC method for executing commands\n\nAlways use -\u003eOUTBSYNC method for executing commands so the posting is done\nif needed (this affects only pmac and scc_pata host drivers at the moment).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9567b349f7e7dd7e2483db99ee8e4a6fe0caca38", "tree": "29abab829b52a451567f8da4280d101fafa44527", "parents": [ "92d3ab27e8fd23d1a9dc3b69d17b2afb83e5c6f5" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:36 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Apr 28 23:44:36 2008 +0200" }, "message": "ide: merge -\u003eatapi_*put_bytes and -\u003eata_*put_data methods\n\n* Merge -\u003eatapi_{in,out}put_bytes and -\u003eata_{in,out}put_data methods\n into new -\u003e{in,out}put_data methods which take number of bytes to\n transfer as an argument and always do padding.\n\nWhile at it:\n\n* Use \u0027hwif\u0027 or \u0027drive-\u003ehwif\u0027 instead of \u0027HWIF(drive)\u0027.\n\nThere should be no functional changes caused by this patch (all users\nof -\u003eata_{in,out}put_data methods were using multiply-of-4 word counts).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4c3032d8a4d6c97bd6e02bcab524ef2428d89561", "tree": "4528851a9b04282f602cebb6b2ab4bc677b63259", "parents": [ "387750c3bf49c22f6189436032145e2131985076" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sun Apr 27 15:38:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sun Apr 27 15:38:32 2008 +0200" }, "message": "ide: add struct ide_io_ports (take 3)\n\n* Add struct ide_io_ports and use it instead of `unsigned long io_ports[]`\n in ide_hwif_t.\n\n* Rename io_ports[] in hw_regs_t to io_ports_array[].\n\n* Use un-named union for \u0027unsigned long io_ports_array[]\u0027 and \u0027struct\n ide_io_ports io_ports\u0027 in hw_regs_t.\n\n* Remove IDE_*_OFFSET defines.\n\nv2:\n* scc_pata.c build fix from Stephen Rothwell.\n\nv3:\n* Fix ctl_adrr typo in Sparc-specific part of ns87415.c.\n (Noticed by Andrew Morton)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5e37bdc081a980dd0d669e6387bcf15ca9666f81", "tree": "d842166c3bd23fbf3dfba0ccaa0f9ed5cc3096db", "parents": [ "1fd1890594bd355a4217f5658a34763e77decee3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:24 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Apr 26 22:25:24 2008 +0200" }, "message": "ide: add struct ide_dma_ops (take 3)\n\nAdd struct ide_dma_ops and convert core code + drivers to use it.\n\nWhile at it:\n\n* Drop \"ide_\" prefix from -\u003eide_dma_end and -\u003eide_dma_test_irq methods.\n\n* Drop \"ide_\" \"infixes\" from DMA methods.\n\n* au1xxx-ide.c:\n - use auide_dma_{test_irq,end}() directly in auide_dma_timeout()\n\n* pdc202xx_old.c:\n - drop \"old_\" \"infixes\" from DMA methods\n\n* siimage.c:\n - add siimage_dma_test_irq() helper\n - print SATA warning in siimage_init_one()\n\n* Remove no longer needed -\u003einit_hwif implementations.\n\nv2:\n* Changes based on review from Sergei:\n - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/\n - s/drive-\u003ehwif/hwif/ in idefloppy_pc_intr().\n - fix patch description w.r.t. au1xxx-ide changes\n - fix au1xxx-ide build\n - fix naming for cmd64*_dma_ops\n - drop \"ide_\" and \"old_\" infixes\n - s/hpt3xxx_dma_ops/hpt37x_dma_ops/\n - s/hpt370x_dma_ops/hpt370_dma_ops/\n - use correct DMA ops for HPT302/N, HPT371/N and HPT374\n - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/\n\nv3:\n* Two bugs slipped in v2 (noticed by Sergei):\n - use correct DMA ops for HPT374 (for real this time)\n - handle HPT370/HPT370A properly\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e3bfae4c105c9b79a539bb868e8541d2ad38deee", "tree": "d2ef5f10e34f0317cdb1dea96379fdf927199002", "parents": [ "eaec3e7ded9dbc88bad393c076b65f4b7b11d30d" ], "author": { "name": "Borislav Petkov", "email": "petkovbb@googlemail.com", "time": "Fri Apr 18 00:46:27 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Apr 18 00:46:27 2008 +0200" }, "message": "ide-scsi: do non-atomic pc-\u003eflags testing\n\n...also, convert ide-scsi to using the generic pc-\u003eflags defines.\n\nSigned-off-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1c065787c0359fc3b438c1c0aa2fcfd514fef07a", "tree": "0b06acf2d947099286baa9e23d2a752143f15b4a", "parents": [ "8e555123911cc912427bd25b52ebfb7b6c08e39a" ], "author": { "name": "Borislav Petkov", "email": "petkovbb@googlemail.com", "time": "Fri Apr 18 00:46:27 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Apr 18 00:46:27 2008 +0200" }, "message": "ide-scsi: convert driver to using generic ide_atapi_pc\n\nSigned-off-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "23579a2a170265aacf78069f4817a41c1d6e9323", "tree": "a20db3f337b64b13e482a2cb2f41e03b13d52e66", "parents": [ "7616c0ad2087c7d244b8985390c63059a6223c45" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Apr 18 00:46:26 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Apr 18 00:46:26 2008 +0200" }, "message": "ide: remove IDE_*_REG macros\n\n* Add IDE_{ALTSTATUS,IREASON,BCOUNTL,BCOUNTH}_OFFSET defines.\n\n* Remove IDE_*_REG macros - this results in more readable\n and slightly smaller code.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7616c0ad2087c7d244b8985390c63059a6223c45", "tree": "c65d7e5dce8b6ec314b56ad2903c8760e2659753", "parents": [ "3ad6776cca21f2456b7288f44f224b344ac3c4d0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Apr 18 00:46:26 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Apr 18 00:46:26 2008 +0200" }, "message": "ide: add ide_atapi_{discard_data,write_zeros} inline helpers\n\nAdd ide_atapi_{discard_data,write_zeros} inline helpers to \u003clinux/ide.h\u003e\nand use them instead of home-brewn helpers in ide-{floppy,tape,scsi}.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c47137a99c597330b69057158b26061a360c0e09", "tree": "aacd4cb968b8d7bdebdcbcce19f110469a977243", "parents": [ "29dd59755a849cc6475faa6a75f3b804e23a6fc2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:51 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:51 2008 +0100" }, "message": "ide: add ide_read_[alt]status() inline helpers\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "98d2a7aad1cbeb6e75e054bfb09d172b9a175df5", "tree": "62746142fe6ef1e75622dc562469b6f6b42bc47d", "parents": [ "629f944bb18c9deccce89ad833f1211c0036a632" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "message": "ide-scsi: remove needless SELECT_DRIVE() call\n\nSELECT_DRIVE() is called by IDE core code in start_request() before device\ndriver\u0027s -\u003edo_request method. In ide-scsi case -\u003edo_request is implemented\nby idescsi_do_request() which is also the only user of idescsi_issue_pc().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2d6027f0877518c2ca8f3492e57ed5b182904a0c", "tree": "75cecb73493694e40e103172ebad32d022e6ad52", "parents": [ "c1c9dbc849c2d9d7cddd58a1de4f3bdd632c161f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:44 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:44 2008 +0100" }, "message": "ide-scsi: use ide_execute_command()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "59bca8cc995428c34d8cdfadfa87c8e3f01c4340", "tree": "8c50895494db34913d09cc3017b46fe28ec4c102", "parents": [ "58f189fccc72bb8a91de1854e519b47d64fbdbaa" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "message": "ide: update/add my Copyrights\n\nThe last years stuff and a trip down memory lane...\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "58f189fccc72bb8a91de1854e519b47d64fbdbaa", "tree": "977aa91b6dd93ab07b22f60f97e8c91533f9125e", "parents": [ "fadd11c71b5a100fb7560b84a6272b8883082726" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "message": "ide: delete filenames/versions from comments\n\nDelete filenames/versions from comments.\n\nI\u0027m leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s\nto maintainers of the respective drivers.\n\nWhile at it:\n\n* Remove unused VERSION define from ide.c.\n\n* Remove unused/stale DRV_VERSION define from au1xxx-ide.c.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5a330e39b13fe8d368d015338a4267129f502a55", "tree": "4826e290bb322c662e9d4f5eeea1851461052ec0", "parents": [ "4c4e21486154c8db93c7e82a4b3ab5f621cd1d97" ], "author": { "name": "Kiyoshi Ueda", "email": "k-ueda@ct.jp.nec.com", "time": "Tue Dec 11 17:49:29 2007 -0500" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jan 28 10:36:56 2008 +0100" }, "message": "blk_end_request: changing ide-scsi (take 4)\n\nThis patch converts ide-scsi to use blk_end_request interfaces.\nRelated \u0027uptodate\u0027 arguments are converted to \u0027error\u0027.\n\nCc: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: Kiyoshi Ueda \u003ck-ueda@ct.jp.nec.com\u003e\nSigned-off-by: Jun\u0027ichi Nomura \u003cj-nomura@ce.jp.nec.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "2fc573881957337c4ea1c84b92d2f27d076cad57", "tree": "790726063934a7ea8c384f2314d44bc03b22f779", "parents": [ "932aead6d21b631b2058255981824008a6eae32e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "message": "ide: add ide_pktcmd_tf_load() helper\n\nAdd ide_pktcmd_tf_load() helper and convert ATAPI device drivers to use it.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "932aead6d21b631b2058255981824008a6eae32e", "tree": "9b5296135df4eec2878bc25e90631d4f784bdab7", "parents": [ "3a6a3549afe7dfe212b6384106bec957bb393f3a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "message": "ide-{floppy,tape,scsi}: fix register loading order when issuing packet command\n\nLoad IDE_BCOUNTL_REG before IDE_BCOUNTH_REG when issuing packet command.\n\nIt shouldn\u0027t affect anything (just a usual paranoia to separate changes\nwhich change the way in which hardware is accessed from code cleanups).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8e7657ae0f56c14882e53ffdae8055c2b1624de1", "tree": "93e8fbbf66d0a9f877b13d4534c6052713f3a268", "parents": [ "790d1239898d4f893112280decd344d90f43ee96" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "message": "ide: remove atapi_ireason_t (take 3)\n\nRemove atapi_ireason_t.\n\nWhile at it:\n* replace \u0027HWIF(drive)\u0027 by \u0027drive-\u003ehwif\u0027 (or just \u0027hwif\u0027 where possible)\n\nv2:\n* v1 had CD and IO bits reversed in many places.\n\n* Use CD and IO defines from \u003clinux/hdreg.h\u003e.\n\nv3:\n* Fix incorrect \"(ireason \u0026 IO) \u003d\u003d test_bit()\". (Noticed by Sergei)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "790d1239898d4f893112280decd344d90f43ee96", "tree": "a8ed2d8fedc4d62b28249d84db4c2904f738cbb3", "parents": [ "e5f9f5a89a01abc2b9c09747452aeb9218d6bffd" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "message": "ide: remove ata_nsector_t, ata_data_t and atapi_bcount_t\n\nRemove ata_nsector_t, ata_data_t (unused) and atapi_bcount_t.\n\nWhile at it:\n* replace \u0027HWIF(drive)\u0027 by \u0027hwif\u0027\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e5f9f5a89a01abc2b9c09747452aeb9218d6bffd", "tree": "6a09f9be2ccbc27ef0baf0001719a70240c02537", "parents": [ "0e38a66a1e69821ab57a06d5a7b11f0df9275bf4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "message": "ide: remove atapi_feature_t\n\nRemove atapi_feature_t.\n\nWhile at it:\n* replace \u0027HWIF(drive)\u0027 by \u0027hwif\u0027\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "22c525b976778cce5bb6f8fdcc70046168c54b1a", "tree": "40ab6ef79aa8e059d55e8c55d19fdc4dfe7fdce3", "parents": [ "6a2144146aa2e0eb60e48ba73ac0e1c51346edf6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:11 2008 +0100" }, "message": "ide: remove ata_status_t and atapi_status_t\n\nRemove ata_status_t (unused) and atapi_status_t.\n\nWhile at it:\n* replace \u0027HWIF(drive)\u0027 by \u0027drive-\u003ehwif\u0027 (or just \u0027hwif\u0027 where possible)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "69ae6fee4f95c0535e49e338ce0ed3b27fd485b5", "tree": "9fcf32235604cd4147f31ba08e60a0611c087331", "parents": [ "da8cadb31b82c9d41fc593c8deab6aa20b162d6b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Dec 12 23:31:57 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Dec 12 23:31:57 2007 +0100" }, "message": "ide-scsi: add ide_scsi_hex_dump() helper\n\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCc: Denis Cheng \u003ccrquan@gmail.com\u003e\nCc: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6413f08666830afec21e41e50c28a2c5105ede69", "tree": "4b8fdb75f63d1063c9bb581dd53a7fa0e246575b", "parents": [ "e97564f362a93f8c248246c19828895950341252" ], "author": { "name": "Denis Cheng", "email": "crquan@gmail.com", "time": "Tue Nov 27 21:35:58 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 27 21:35:58 2007 +0100" }, "message": "ide-scsi: use print_hex_dump from \u003clinux/kernel.h\u003e\n\nthese utilities implemented in lib/hexdump.c are more handy, please use this.\n\nBart:\n- s/KERN_DEBUG/KERN_CONT/ as pointed out by Randy\n- s/DUMP_PREFIX_OFFSET/DUMP_PREFIX_NONE/\n- don\u0027t include ASCII dump\n- respect 80-columns limit\n\nSigned-off-by: Denis Cheng \u003ccrquan@gmail.com\u003e\nCc: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "45711f1af6eff1a6d010703b4862e0d2b9afd056", "tree": "3d0048f46e3df9d217d56127462ebe680348bd5a", "parents": [ "78c2f0b8c285c5305b3e67b0595200541e15eb43" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Oct 22 21:19:53 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Oct 22 21:19:53 2007 +0200" }, "message": "[SG] Update drivers to use sg helpers\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "1977f032722c27ee3730284582fd3991ad9ac81b", "tree": "00ba5692a697a387399131850c56e01345c7cace", "parents": [ "1276b103c20603835d9b903cae099125e8c2c5a3" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Thu Oct 18 23:40:25 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Oct 19 11:53:41 2007 -0700" }, "message": "remove asm/bitops.h includes\n\nremove asm/bitops.h includes\n\nincluding asm/bitops directly may cause compile errors. don\u0027t include it\nand include linux/bitops instead. next patch will deny including asm header\ndirectly.\n\nCc: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c79d88b7fa48bc21ffd09903a98b93bf0744bce3", "tree": "eaaf9fd8345be724ae86d9dfc85f359d597888bf", "parents": [ "5804509e652fd26227f6da732d5445af444730d3" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Oct 17 13:16:35 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Oct 17 13:16:35 2007 +0200" }, "message": "[SCSI] ide-scsi: remove usage of sg_last()\n\nWe want to remove sg_last(), it\u0027s a very expensive interface. So\nkeep track of number of sg entries in the sg list, instead of comparing\nwith the last entry.\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "2428427e49beddd8ebc53054219fac2cc9ffee23", "tree": "22b128278e1e0e490f0b7a4c61dd8bb04a660019", "parents": [ "ebb3e820b83e426ee331bae6d8fb0e54f472a25d" ], "author": { "name": "Boaz Harrosh", "email": "bharrosh@panasas.com", "time": "Wed Oct 17 09:21:19 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Oct 17 09:21:19 2007 +0200" }, "message": "[SCSI] ide-scsi: use scsi_sg_count() instead of -\u003euse_sg\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "d274a9878bcd028712ea4f3d96db72b63d3eba4d", "tree": "156c237e5fa38e86e3caa57f8bdac07aef0da94d", "parents": [ "2f08fe5221b79aa1e240aa3938e9de6ab0baf1d3" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Tue Oct 16 11:20:52 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Tue Oct 16 11:20:52 2007 +0200" }, "message": "ide-scsi: sg chaining support\n\nAcked-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "6fdea8dbbe4fc021afb601ef5339d5c5825c5cb6", "tree": "2b669ff314903bca1f2f356c5fb83bf9d4499e6c", "parents": [ "34f8f0d294423a7e2ef84a741890b1bfa317aa4e" ], "author": { "name": "Matthew Wilcox", "email": "matthew@wil.cx", "time": "Wed Aug 15 12:57:01 2007 -0600" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.localdomain", "time": "Fri Oct 12 14:51:14 2007 -0400" }, "message": "[SCSI] ide-scsi: Close narrow race in release\n\nWe were releasing the block devices before removing the host, so commands\ncould still be coming in which would cause a panic. Just remove the\nhost before releasing the block devices to close this race.\n\nSigned-off-by: Matthew Wilcox \u003cmatthew@wil.cx\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "427d0bd4fde60f40e9518817d826e48c05262a98", "tree": "973881b7afab9ecec00db9723d9995b2caab20f4", "parents": [ "52aeeca9001d1b4037a8e5d0c001ebb5fdc61b37" ], "author": { "name": "Boaz Harrosh", "email": "bharrosh@panasas.com", "time": "Tue Sep 18 12:27:43 2007 +0200" }, "committer": { "name": "James Bottomley", "email": "jejb@mulgrave.localdomain", "time": "Fri Oct 12 14:49:08 2007 -0400" }, "message": "[SCSI] ide-scsi.: convert to data accessors and !use_sg cleanup\n\n - Convert ide-scsi to the new data accessors and cleanup\n the !use_sg code paths.\n\n In old code the driver was trying to translate narrow commands,\n if received, to wide commands. This code path still assumed\n scsi_cmnd-\u003erequest_buffer is a linear char pointer.\n This means that this driver was broken since 2.6.17.\n\n As suggested by Christoph Hellwig I set\n use_10_for_rw \u003d 1; and use_10_for_ms \u003d 1;\n for this device and completely killed the translation.\n\nSigned-off-by: Boaz Harrosh \u003cbharrosh@panasas.com\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\n" }, { "commit": "41ead3c918f48710ca1e03eb7b770eabcbbd260b", "tree": "6a1d1d46320f697985c3d1cb04f2ffb8834b233b", "parents": [ "cc60d8baa35c995bf8c40a9730b894993ddb43b9" ], "author": { "name": "Mariusz Kozlowski", "email": "m.kozlowski@tuxland.pl", "time": "Wed Aug 01 23:46:45 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:45 2007 +0200" }, "message": "drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzalloc\n\n drivers/scsi/ide-scsi.c | 34642 -\u003e 34536 (-106 bytes)\n drivers/scsi/ide-scsi.o | 171728 -\u003e 171524 (-204 bytes)\n\nSigned-off-by: Mariusz Kozlowski \u003cm.kozlowski@tuxland.pl\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d1be0a8225f2cb1cdc356ebb0ae6800f023ce67d", "tree": "f106df13285efff456501772c915e26e018f34ef", "parents": [ "ce9b2b0abbf019d5259eb089a1cc256852930f67" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jun 16 02:24:44 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jun 16 02:24:44 2007 +0200" }, "message": "ide-scsi: fix OOPS in idescsi_expiry()\n\ndrive-\u003edriver_data contains pointer to Scsi_Host not idescsi_scsi_t.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7662d046df09e80680b77b68de896beab45e675e", "tree": "ea2281c59399b3867fb37e1005a0f0e0d2170c5d", "parents": [ "1497943ee692aa7519fa972d0e3a339649bf3a96" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: move IDE settings handling to ide-proc.c\n\n* move\n\t__ide_add_setting()\n\tide_add_setting()\n\t__ide_remove_setting()\n\tauto_remove_settings()\n\tide_find_setting_by_name()\n\tide_read_setting()\n\tide_write_setting()\n\tset_xfer_rate()\n\tide_add_generic_settings()\n\tide_register_subdriver()\n\tide_unregister_subdriver()\n\n from ide.c to ide-proc.c\n\n* set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it\n\n* rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(),\n update device drivers to use new names\n\n* add CONFIG_IDE_PROC_FS\u003dn versions of ide_proc_[un]register_driver()\n and ide_add_generic_settings()\n\n* make ide_find_setting_by_name(), ide_{read,write}_setting()\n and ide_{add,remove}_proc_entries() static\n\n* cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef,\n also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc\n\n* remove bogus comment from ide.h\n\n* cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t\n\nBesides saner code this patch results in the IDE core smaller by ~2 kB\n(on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS\u003dn.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1497943ee692aa7519fa972d0e3a339649bf3a96", "tree": "dc70ee9731f66dd323ddb397380b62c0c2977add", "parents": [ "ecfd80e4a514123070b4cfb674b817ba75055df2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: split off ioctl handling from IDE settings (v2)\n\n* do write permission and min/max checks in ide_procset_t functions\n\n* ide-disk.c: drive-\u003eid is always available so cleanup \"multcount\" setting\n accordingly\n\n* ide-disk.c: \"address\" setting was incorrectly defined as type TYPE_INTA,\n fix it by using type TYPE_BYTE and updating ide_drive_t-\u003eadressing field,\n the bug didn\u0027t trigger because this IDE setting uses custom -\u003eset function\n\n* ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl\n\n* ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl\n\n* handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl()\n instead of using IDE settings to deal with them\n\n* remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl\n fields from ide_settings_t, also remove now unused TYPE_INTA handling\n\nv2:\n* add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ecfd80e4a514123070b4cfb674b817ba75055df2", "tree": "956baa39e22030d139803b7585bd71e91c637bb5", "parents": [ "29e744d088e3555f4efbdf390f01088dd66993b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "message": "ide: make /proc/ide/ optional\n\nAll important information/features should be already available through\nsysfs and ioctl interfaces.\n\nAdd CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option,\ndisabling it makes IDE driver ~5 kB smaller (on x86-32).\n\nWhile at it add CONFIG_PROC_FS\u003dn versions of proc_ide_{create,destroy}()\nand remove no longer needed #ifdefs.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c94964a4555eb58be3f45edf2b63a2b3f549ef29", "tree": "a8a0bf41a6c2b675e8f376e870f26724e5870327", "parents": [ "7b77d864af29c193f6cee8338dbda40accb9b27b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "message": "ide: remove ide_drive_t.usage\n\nThis field is no longer used by the core IDE code so fix ide-{disk,floppy}\ndrivers to keep openers count in the driver specific objects and remove\nit from ide-{cd,scsi,tape} drivers (it was write-only).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "aaeab80bdbc0d10a98adc6fa76c29ca2f1816553", "tree": "834f6a62ad9ba24da6aceeacacba93c3cc66b369", "parents": [ "2ee91f197c0bc654b24eed5831fd12aa0d566a7d" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Wed Dec 06 20:39:33 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.osdl.org", "time": "Thu Dec 07 08:39:43 2006 -0800" }, "message": "[PATCH] ide_scsi: allow it to be used for non CD only\n\nSome people want to use ide_cd for CD-ROM but still dynamically load\nide-scsi for things like tape drives. If you compile in the CD driver this\nworks out but if you want them modular you need an option to ensure that\nwhoever loads first the right things happen.\n\nThis replaces the original draft patch which leaked a scsi host reference\n\n[akpm@osdl.org: add MODULE_PARM_DESC]\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "cdd6026217c0e4cda2efce1bdc318661bef1f66f", "tree": "e26bb9c40b603b9cc321aa4217fecf34e1bc5f24", "parents": [ "49171e5c6f414d49a061b5c1c84967c2eb569822" ], "author": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Fri Jul 28 09:32:07 2006 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Sat Sep 30 20:29:23 2006 +0200" }, "message": "[PATCH] Remove -\u003erq_status from struct request\n\nAfter Christophs SCSI change, the only usage left is RQ_ACTIVE\nand RQ_INACTIVE. The block layer sets RQ_INACTIVE right before freeing\nthe request, so any check for RQ_INACTIVE in a driver is a bug and\nindicates use-after-free.\n\nSo kill/clean the remaining users, straight forward.\n\nSigned-off-by: Jens Axboe \u003caxboe@suse.de\u003e\n" }, { "commit": "4aff5e2333c9a1609662f2091f55c3f6fffdad36", "tree": "b73d8c2b7c1bdc03d3313c108da7dfc95ee95525", "parents": [ "77ed74da26f50fa28471571ee7a2251b77526d84" ], "author": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Thu Aug 10 08:44:47 2006 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Sat Sep 30 20:23:37 2006 +0200" }, "message": "[PATCH] Split struct request -\u003eflags into two parts\n\nRight now -\u003eflags is a bit of a mess: some are request types, and\nothers are just modifiers. Clean this up by splitting it into\n-\u003ecmd_type and -\u003ecmd_flags. This allows introduction of generic\nLinux block message types, useful for sending generic Linux commands\nto block devices.\n\nSigned-off-by: Jens Axboe \u003caxboe@suse.de\u003e\n" }, { "commit": "36e8e5783297fbb83bdebe7e245ef659958f23cb", "tree": "2bcb939df6a5ff9e7ca1e7c35fb9982f6b822fac", "parents": [ "4e54bdaa9cf55d7e74409ea288b705c144b2627e" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Sun Aug 27 01:23:56 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Aug 27 11:01:32 2006 -0700" }, "message": "[PATCH] lockdep: annotate idescsi_pc_intr()\n\nidescsi_pc_intr() uses local_irq_enable() in IRQ context: annotate it.\n\n(this has no effect on kernels with lockdep disabled. On kernels with lockdep\nenabled this means that we wont actually disable interrupts, and the warning\nmessage will go away as well.)\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7", "tree": "6d98881fe91fd9583c109208d5c27131b93fa248", "parents": [ "e02169b682bc448ccdc819dc8639ed34a23cedd8" ], "author": { "name": "Jörn Engel", "email": "joern@wohnheim.fh-wedel.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "125e18745f16685f69a34fd6130d47598fc4bf54", "tree": "c97ed94b0525a572efa1bd4990a55b18be5d781d", "parents": [ "78ce89c92bc6eaf5933b5664bff64253a7103bd7" ], "author": { "name": "Eric Sesterhenn", "email": "snakebyte@gmx.de", "time": "Fri Jun 23 02:06:06 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Jun 23 07:43:08 2006 -0700" }, "message": "[PATCH] More BUG_ON conversion\n\nSigned-off-by: Eric Sesterhenn \u003csnakebyte@gmx.de\u003e\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nAcked-by: \"Salyzyn, Mark\" \u003cmark_salyzyn@adaptec.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "e723ccd805857a46d3b63fbd20edea8579c6c541", "tree": "00ea3941543aad06172f5f16c78cfed2f4afb2e3", "parents": [ "8ed965d612d9e9bc08805c75123f063cf6966311" ], "author": { "name": "Jes Sorensen", "email": "jes@sgi.com", "time": "Thu Mar 23 03:00:22 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Mar 23 07:38:10 2006 -0800" }, "message": "[PATCH] sem2mutex: drivers/scsi/ide-scsi.c\n\nSemaphore to mutex conversion.\n\nThe conversion was generated via scripts, and the result was validated\nautomatically via a script as well.\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Jens Axboe \u003caxboe@suse.de\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" } ], "next": "b62735d9c6212de6fd1b5e96b41d978939fb0dd2" }