)]}' { "log": [ { "commit": "42379b1122bab7f9aefdbd4b7004a6fa89dfbae5", "tree": "cc5e0bb92bc6353d0476d45f5a68ff1fc23c4233", "parents": [ "c691cc84529ec88ccb32b174535bb61875888c90" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:45 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:56 2008 +0200" }, "message": "pci: change msi-x vector to 32bit\n\nwe are using 28bit pci (bus/dev/fn + 12 bits) as irq number, so the\ncache for irq number should be 32 bit too.\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "171ac6ae94e31d0fcb5ae922efd4a77a7e48b4e5", "tree": "416216c6e98f8599906dfcba7fe7aa315b0d9e3e", "parents": [ "c7576b5b339f08c7346591c71a330b08f8b9943f" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:49:54 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:06 2008 +0200" }, "message": "drivers/scsi: use nr_irqs\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "fff11c0c827c88f1bca0e475fcd4d319ff44c0ac", "tree": "cab422ebb43ca5348d967f41461f601fcdf39cf8", "parents": [ "da9870e477492e0f837aa0cd26b2ac2e372b91d2" ], "author": { "name": "Geert Uytterhoeven", "email": "geert@linux-m68k.org", "time": "Mon Oct 13 21:59:02 2008 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 10:23:27 2008 -0700" }, "message": "m68k: Atari SCSI needs NVRAM\n\nERROR: \"nvram_read_byte\" [drivers/scsi/atari_scsi.ko] undefined!\nERROR: \"nvram_check_checksum\" [drivers/scsi/atari_scsi.ko] undefined!\n\nSigned-off-by: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "29c8a24672e1cdfee99c15b870c57eb30ae69daf", "tree": "26f67aaca31d878339a99d89e0036d912bdef449", "parents": [ "7477fb6fbc339469ea945e007f3f7b3bb13b25f7" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Mon Oct 13 21:58:59 2008 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 10:23:27 2008 -0700" }, "message": "m68k: Remove the broken Hades support\n\nThis patch removes the Hades support that was marked as BROKEN 5 years ago.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7591103c08abade60aeddb432ed0686ddd0de1c6", "tree": "523343b43b0c420666da18c64e1e9f21ff63dea5", "parents": [ "2be4ff2f084842839b041b793ed6237e8d1d315a", "9c6102d446985bca9c426cb2d9b478ed21d2b024" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 13 14:15:06 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 13 14:15:06 2008 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (66 commits)\n ata: Add documentation for hard disk shock protection interface (v3)\n ide: Implement disk shock protection support (v4)\n ide-cd: fix printk format warning\n piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list\n ide-atapi: assign taskfile flags per device type\n ide-cd: move cdrom_info.dma to ide_drive_t.dma\n ide: add ide_drive_t.dma flag\n ide-cd: add a debug_mask module parameter\n ide-cd: convert driver to new ide debugging macro (v3)\n ide: move SFF DMA code to ide-dma-sff.c\n ide: cleanup ide-dma.c\n ide: cleanup ide_build_dmatable()\n ide: remove needless includes from ide-dma.c\n ide: switch to DMA-mapping API part #2\n ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF\u003dn\n ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF\u003dn\n ide: __ide_dma_end() -\u003e ide_dma_end()\n pmac: remove needless pmac_ide_destroy_dmatable() wrapper\n pmac: remove superfluous pmif \u003d\u003d NULL checks\n ide: Two fixes regarding memory allocation\n ...\n" }, { "commit": "2be4ff2f084842839b041b793ed6237e8d1d315a", "tree": "1d776ac1717edeff4ee7d59ab0aea2782cb86dba", "parents": [ "cf2fa66055d718ae13e62451bb546505f63906a2", "a45b3fb19ba1e4dfc3fc53563a072612092930a9" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 13 14:12:40 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 13 14:12:40 2008 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits)\n pcmcia: ioctl-internal definitions\n pcmcia: cistpl header cleanup\n pcmcia: remove unused argument to pcmcia_parse_tuple()\n pcmcia: card services header cleanup\n pcmcia: device_id header cleanup\n pcmcia: encapsulate ioaddr_t\n pcmcia: cleanup device driver header file\n pcmcia: cleanup socket services header file\n pcmcia: merge ds_internal.h into cs_internal.h\n pcmcia: cleanup cs_internal.h\n pcmcia: cs_internal.h is internal\n pcmcia: use dev_printk for cs_error()\n pcmcia: remove CS_ error codes alltogether\n pcmcia: deprecate CS_BAD_TUPLE\n pcmcia: deprecate CS_BAD_ARGS\n pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE\n pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE\n pcmcia: deprecate CS_NO_MORE_ITEMS\n pcmcia: deprecate CS_IN_USE\n pcmcia: deprecate CS_CONFIGURATION_LOCKED\n ...\n\nFix trivial conflict in drivers/pcmcia/ds.c manually\n" }, { "commit": "4ab3d50224e35811b3351c28e63057595e8406e6", "tree": "ccd1a729543defa03df97f0dc0b416f53c793dcc", "parents": [ "a36223b0dc14606b5c80aacbbe6288133693a841" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:43 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:43 2008 +0200" }, "message": "ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify()\n\nSet IDE_AFLAG_DRQ_INTERRUPT in do_identify() instead of ATAPI\ndevice drivers *_setup() methods.\n\nWhile at it:\n- use ata_id_cdb_intr()\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0ae4b3199ab1b6d511c6e0948e92049c272a346a", "tree": "73840e552453e1ef260de880aa8214a65227aa57", "parents": [ "c39220483ebe6871fb129d4b2236cd95290c41fc" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "message": "ide: remove superfluous -\u003emedia field from ide_driver_t\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "97100fc816badbbc162644cfde7ad39ae9211fb4", "tree": "904faf5453c2dea32fa3fde5fda230118f3effda", "parents": [ "be3c096ebdbe3c828aacb5473751a22840753eff" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:36 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:36 2008 +0200" }, "message": "ide: add device flags\n\nAdd \u0027unsigned long dev_flags\u0027 to ide_drive_t and convert bitfields\nto IDE_DFLAG_* flags.\n\nWhile at it:\n- IDE_DFLAG_ADDRESSING -\u003e IDE_DFLAG_LBA48\n- fixup some comments\n- remove needless g-\u003eflags zeroing from ide*_probe()\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "baf08f0be6d986521bb2fbdc7af51fc4847da734", "tree": "5ac765703ad79edeafc6eec39fe42850bd6b5dc6", "parents": [ "aa5d2de7b080873f6d9ac3aede423c9713bf0caa" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: make ide_transfer_pc() static\n\n* Move -\u003eticks field from struct ide_floppy_obj to ide_drive_t.\n\n* Move idefloppy_transfer_pc() to ide-atapi.c and make\n ide_transfer_pc() use it.\n\n* Always use ide_transfer_pc as a handler in ide_issue_pc().\n\n* Remove no longer used idefloppy_start_pc_transfer(),\n ide*_transfer_pc() and \u0027handler\u0027 argument from ide_issue_pc().\n\n* Make ide_transfer_pc() static.\n\nWhile at it:\n\n* idefloppy_transfer_pc() -\u003e ide_delayed_transfer_pc()\n\n* IDEFLOPPY_TICKS_DELAY -\u003e IDEFLOPPY_PC_DELAY\n\n* -\u003eticks -\u003e -\u003epc_delay\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aa5d2de7b080873f6d9ac3aede423c9713bf0caa", "tree": "babf0dbf6a7d7e545053736e5ae6976faddabfd7", "parents": [ "85e39035ca381846b031690f4d1ac1f0660da0a2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: make ide_pc_intr() static\n\n* Always use ide_pc_intr as a handler in ide_pc_intr().\n\n* Remove no longer used ide*_pc_intr() and \u0027handler\u0027\n argument from ide_{transfer_pc,pc_intr}().\n\n* Make ide_pc_intr() static.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "85e39035ca381846b031690f4d1ac1f0660da0a2", "tree": "ebdf6b4b173e3e11ce876b8b7b91651a60945f91", "parents": [ "6b0da28b2d0f4f4e2c55689fc062db569075ff60" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: add -\u003epc_{update,io}_buffers methods\n\nAdd -\u003epc_{update,io}_buffers methods to ide_drive_t and use\nthem instead of {update,io}_buffers ide_pc_intr() arguments.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6b0da28b2d0f4f4e2c55689fc062db569075ff60", "tree": "e7113f6db70fe3c2dd16bd2e7e1538fba4236c49", "parents": [ "67c56364df843fb9e3ed1af014b8fbe4b22ff25d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: add ide_retry_pc() helper\n\n* Add ide_create_request_sense_cmd() and ide_retry_pc() helpers\n and convert ide-{atapi,floppy,tape}.c to use them.\n\n* Remove no longer used ide*_create_request_sense_cmd(),\n ide*_retry_pc() and \u0027retry_pc\u0027 argument from ide_pc_intr().\n\n* Make ide_queue_pc_head() static.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "844b9468523c8c2c45b90df4efcabcbe4926b5ab", "tree": "64d239e810c6f143f6d3206fc37200af47f9eee0", "parents": [ "2b9efba48283f34083df6bc53f6752fba4e4d409" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:31 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:31 2008 +0200" }, "message": "ide: drop \u0027timeout\u0027 and \u0027expiry\u0027 arguments from ide_pc_intr()\n\n* Move idescsi_expiry() to ide-atapi.c.\n\n* Move get_timeout() to \u003clinux/ide.h\u003e.\n\n* Drop \u0027timeout\u0027 and \u0027expiry\u0027 arguments from ide_pc_intr().\n\nWhile at it:\n\n* idescsi_expiry() -\u003e ide_scsi_expiry()\n\n* get_timeout() -\u003e ide_scsi_get_timeout()\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2b9efba48283f34083df6bc53f6752fba4e4d409", "tree": "215d86f1934c896f8ec609ab033b69bf5b99e217", "parents": [ "b14c72127fbe8f97e49de7437520175673f7306a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:31 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:31 2008 +0200" }, "message": "ide: add pointer to the current packet command to ide_drive_t\n\n* Add pointer to the current packet command (struct ide_atapi_pc *pc)\n to ide_drive_t and use it instead of the pointer in struct ide_*_obj.\n\n* Use drive-\u003epc in ide_{issue,transfer}_pc() and ide_pc_intr()\n instead of \u0027pc\u0027 argument.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b14c72127fbe8f97e49de7437520175673f7306a", "tree": "7cf54dd800cbb004cd44a947f2a4530fe132a26b", "parents": [ "9b5a18e19f8c610c270ee9a0ba03177d737f6aa5" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:30 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:30 2008 +0200" }, "message": "ide: drop dsc_handle argument from ide_pc_intr()\n\n* Add \u0027int dsc\u0027 argument to -\u003epc_callback method.\n\n* Call ide_tape_handle_dsc() internally in ide_tape_callback()\n if dsc argument is set and update ide_pc_intr() accordingly.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "07104839597803ccd9b2c4f543ee4651522b4aa1", "tree": "b3b569c955fb7abe10d1b89139c0f4a388933609", "parents": [ "589acce53e235055806e81e330af1e8f115bfcc2", "56c5d900dbb8e042bfad035d18433476931d8f93" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Oct 12 11:40:55 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Oct 12 11:40:55 2008 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (180 commits)\n leo: disable cursor when leaving graphics mode\n cg6: disable cursor when leaving graphics mode\n sparc32: sun4m interrupt mask cleanup\n drivers/rtc/Kconfig: don\u0027t build rtc-cmos.o on sparc32\n sparc: arch/sparc/kernel/pmc.c -- extra #include?\n sparc32: Add more extensive documentation of sun4m interrupts.\n sparc32: Kill irq_rcvreg from sun4m_irq.c\n sparc32: Delete master_l10_limit.\n sparc32: Use PROM device probing for sun4c timers.\n sparc32: Use PROM device probing for sun4c interrupt register.\n sparc32: Delete claim_ticker14().\n sparc32: Stop calling claim_ticker14() from sun4c_irq.c\n sparc32: Kill clear_profile_irq btfixup entry.\n sparc32: Call sun4m_clear_profile_irq() directly from sun4m_smp.c\n sparc32: Remove #if 0\u0027d code from sun4c_irq.c\n sparc32: Remove some SMP ifdefs in sun4d_irq.c\n sparc32: Use PROM infrastructure for probing and mapping sun4d timers.\n sparc32: Use PROM device probing for sun4m irq registers.\n sparc32: Use PROM device probing for sun4m timer registers.\n sparc: Fix user_regset \u0027n\u0027 field values.\n ...\n" }, { "commit": "56c5d900dbb8e042bfad035d18433476931d8f93", "tree": "00b793965beeef10db03e0ff021d2d965c410759", "parents": [ "4dd95b63ae25c5cad6986829b5e8788e9faa0330", "ead9d23d803ea3a73766c3cb27bf7563ac8d7266" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Oct 11 12:39:35 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Oct 11 12:39:35 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6\n\nConflicts:\n\n\tsound/core/memalloc.c\n" }, { "commit": "92f1f8fd8040e7b50a67a850a935509bb01201bb", "tree": "df27468982bc64f0a6fdc54f05153e382ca63a1b", "parents": [ "d6e2955a6b82d2312b5ff885ce13c8ab54d59d96" ], "author": { "name": "Elias Oltmanns", "email": "eo@nebensachen.de", "time": "Fri Oct 10 22:39:40 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:40 2008 +0200" }, "message": "ide: Remove ide_spin_wait_hwgroup() and use special requests instead\n\nUse a special request for serialisation purposes and get rid of the\nawkward ide_spin_wait_hwgroup(). This also involves converting the\nide_devset structure so it can be shared by the /proc and the ioctl code.\n\nSigned-off-by: Elias Oltmanns \u003ceo@nebensachen.de\u003e\n[bart: use rq-\u003ecmd[] directly]\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "acaa0f5f675ccf6b8a3a11a933419068b1ea1f46", "tree": "8afee71c69bf765a5edd0de82c98c6470905ec20", "parents": [ "c860f955681ebd83df4a03089f1910fc4b54651f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:36 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:36 2008 +0200" }, "message": "ide: add ide_io_buffers() helper\n\n* Make -\u003eio_buffers method return number of bytes transferred.\n\n* Use ide_end_request() instead of idefloppy_end_request()\n in ide_floppy_io_buffers() and then move the call out to\n ide_pc_intr().\n\n* Add ide_io_buffers() helper and convert ide-{floppy,scsi}.c\n to use it instead of ide*_io_buffers().\n\nThere should be no functional changes caused by this patch.\n\nAcked-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c860f955681ebd83df4a03089f1910fc4b54651f", "tree": "fe13b4bba7903747c5760d2bc2a1c7df2048fd90", "parents": [ "4de4b9e1405aef41d199dd20dbce7e9a5dbbf7bf" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:36 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:36 2008 +0200" }, "message": "ide-scsi: cleanup ide_scsi_io_buffers()\n\nPreparation for ide_{floppy,scsi}_io_buffers() unification.\n\nAcked-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "02d599a365d04658bc9ea71762ed17c895079927", "tree": "d6ea4634b2593ce1c71d66d869d1110c0ff3bbff", "parents": [ "ebc6be520673f65aef188abde43972f9cd2162e9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:29 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:29 2008 +0200" }, "message": "ide: remove -\u003esupports_dsc_overlap field from ide_driver_t\n\n* Use drive-\u003emedia and drive-\u003escsi to check if -\u003edsc_overlap\n can be set by HDIO_SET_NICE ioctl in generic_ide_ioctl().\n\n* Remove unused -\u003esupports_dsc_overlap field from ide_driver_t.\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8185d5aa93e0a5c111adc4952a5b87193a68ae5b", "tree": "431aeb09a448b7b07a353e12f4fe931ebb8555cd", "parents": [ "263138a0ad6e38de7f6526b7de037ed4511308ef" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:28 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:28 2008 +0200" }, "message": "ide: /proc/ide/hd*/settings rework\n\n* Add struct ide_devset, S_* flags, *DEVSET() \u0026 ide*_devset_*() macros.\n\n* Add \u0027const struct ide_devset **settings\u0027 to ide_driver_t.\n\n* Use \u0027const struct ide_devset **settings\u0027 in ide_drive_t instead of\n \u0027struct ide_settings_s *settings\u0027. Then convert core code and device\n drivers to use struct ide_devset and co.:\n\n - device settings are no longer allocated dynamically for each device\n but instead there is an unique struct ide_devset instance per setting\n\n - device driver keeps the pointer to the table of pointers to its\n settings in ide_driver_t.settings\n\n - generic settings are kept in ide_generic_setting[]\n\n - ide_proc_[un]register_driver(), ide_find_setting_by_name(),\n ide_{read,write}_setting() and proc_ide_{read,write}_settings()\n are updated accordingly\n\n - ide*_add_settings() are removed\n\n* Remove no longer used __ide_add_setting(), ide_add_setting(),\n __ide_remove_setting() and auto_remove_settings().\n\n* Remove no longer used TYPE_*, SETTING_*, ide_procset_t\n and ide_settings_t.\n\n* -\u003ekeep_settings, -\u003eusing_dma, -\u003eunmask, -\u003enoflush, -\u003edsc_overlap,\n -\u003enice1, -\u003eaddressing, -\u003ewcache and -\u003enowerr ide_drive_t fields\n can now be bitfield flags.\n\nWhile at it:\n\n* Rename ide_find_setting_by_name() to ide_find_setting().\n\n* Rename write_wcache() to set_wcache().\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1e874f448365b80e69b8a60b8b575b17f00811f3", "tree": "6a79a12ffdcaa12f5f89356527c1ab02014c751b", "parents": [ "3ceca727fe3a38dd8d7a3adf938fefda83eee8af" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "message": "ide: call ide_proc_register_driver() later\n\nCall ide_proc_register_driver() in ide*_setup() (just before\nide*_add_settings() call) instead of in -\u003eprobe method.\n\nDespite being basically a preparation for /proc/ide/hd*/settings\nrework this is a nice cleanup in itself.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3ceca727fe3a38dd8d7a3adf938fefda83eee8af", "tree": "61fb443f0e1a260110f63b23f236605677dd85a6", "parents": [ "7c51c17e0431d2f26bc23ee07de12eafb125ce83" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:27 2008 +0200" }, "message": "ide: include \u003clinux/hdreg.h\u003e only when needed\n\n* Include \u003clinux/ata.h\u003e directly in \u003clinux/ide.h\u003e\n instead of through \u003clinux/hdreg.h\u003e.\n\n* Include \u003clinux/hdreg.h\u003e only when needed.\n\nCc: Christoph Hellwig \u003chch@infradead.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2a924662b646fa25cb491d50aa1202a94aa4ac55", "tree": "9339ca9cbc1600149a91a6b0fa919ef0d3b6ec3d", "parents": [ "3cd5f1eae093a7d6ff8a63c746eba9d6f689ba91" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:24 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:24 2008 +0200" }, "message": "ide: remove needless drive-\u003epresent checks from device drivers\n\nRemove needless drive-\u003epresent checks from -\u003eprobe methods\n(device model takes care of that).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3a7d24841ad794ae64c90d7d00d62a83741912aa", "tree": "d71a36678fa88ed1e0b279390b6169f5018186bf", "parents": [ "f26b3d75959e9a0e43a2e1e1148c075592746c3d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:21 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:21 2008 +0200" }, "message": "ide: use ATA_* defines instead of *_STAT and *_ERR ones\n\n* ERR_STAT -\u003e ATA_ERR\n* INDEX_STAT -\u003e ATA_IDX\n* ECC_STAT -\u003e ATA_CORR\n* DRQ_STAT -\u003e ATA_DRQ\n* SEEK_STAT -\u003e ATA_DSC\n* WRERR_STAT -\u003e ATA_DF\n* READY_STAT -\u003e ATA_DRDY\n* BUSY_STAT -\u003e ATA_BUSY\n\n* MARK_ERR -\u003e ATA_AMNF\n* TRK0_ERR -\u003e ATA_TRK0NF\n* ABRT_ERR -\u003e ATA_ABORTED\n* MCR_ERR -\u003e ATA_MCR\n* ID_ERR -\u003e ATA_IDNF\n* MC_ERR -\u003e ATA_MC\n* ECC_ERR -\u003e ATA_UNC\n* ICRC_ERR -\u003e ATA_ICRC\n\n* BBD_ERR -\u003e ATA_BBK\n\nAlso:\n\n* ILI_ERR -\u003e ATAPI_ILI\n* EOM_ERR -\u003e ATAPI_EOM\n* LFS_ERR -\u003e ATAPI_LFS\n\n* CD -\u003e ATAPI_COD\n* IO -\u003e ATAPI_IO\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aaaade3f059fa1b57283d4a7c8351a42ec747bf0", "tree": "3c2e80f0317fc52d9866b0bb83b8cc89ed764b57", "parents": [ "a4f19040a3a6cd431efe0a10b9d2e8d5e3904865" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:21 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:21 2008 +0200" }, "message": "ide: WIN_* -\u003e ATA_CMD_*\n\n* Use ATA_CMD_* defines instead of WIN_* ones.\n\nWhile at it:\n\n* EXABYTE_ENABLE_NEXT -\u003e ATA_EXABYTE_ENABLE_NEST\n\n* SETFEATURES_{EN,DIS}_WCACHE -\u003e SETFEATURES_WC_{ON,OFF}\n\n* SETFEATURES_{EN,DIS}_AAM -\u003e SETFEATURES_AAM_{ON,OFF}\n\n* SMART_* -\u003e ATA_SMART_*\n\n* Remove stale comment from ide-proc.c.\n\nPartially based on earlier work by Chris Wedgwood.\n\nAcked-by: Chris Wedgwood \u003ccw@f00f.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4dde4492d850a4c9bcaa92e5bd7f4eebe3e2f5ab", "tree": "ee3be70390e4c617b44329edef0a05039f59c81a", "parents": [ "5b90e990928919ae411a68b865e8a6ecac09a603" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:19 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 10 22:39:19 2008 +0200" }, "message": "ide: make drive-\u003eid an union (take 2)\n\nMake drive-\u003eid an unnamed union so id can be accessed either by using\n\u0027u16 *id\u0027 or \u0027struct hd_driveid *driveid\u0027. Then convert all existing\ndrive-\u003eid users accordingly (using \u0027u16 *id\u0027 when possible).\n\nThis is an intermediate step to make ide \u0027struct hd_driveid\u0027-free.\n\nWhile at it:\n\n- Add missing KERN_CONTs in it821x.c.\n\n- Use ATA_ID_WORDS and ATA_ID_*_LEN defines.\n\n- Remove unnecessary checks for drive-\u003eid.\n\n- s/drive_table/table/ in ide_in_drive_list().\n\n- Cleanup ide_config_drive_speed() a bit.\n\n- s/drive1/dev1/ \u0026 s/drive0/dev0/ in ide_undecoded_slave().\n\nv2:\nFix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell)\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ef5bef357cdf49f3a386c7102dbf3be5f7e5c913", "tree": "48d9dc86768e3e146267ea21d0c898f9008275a1", "parents": [ "e26feff647ef34423b048b940540a0059001ddb0", "41bfcf90101601f9507240ff0435c1b73d28a132" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 10 10:53:26 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 10 10:53:26 2008 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits)\n [SCSI] zfcp: fix double dbf id usage\n [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev\n [SCSI] zfcp: fix erp list usage without using locks\n [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport\n [SCSI] zfcp: fix deadlock caused by shared work queue tasks\n [SCSI] zfcp: put threshold data in hba trace\n [SCSI] zfcp: Simplify zfcp data structures\n [SCSI] zfcp: Simplify get_adapter_by_busid\n [SCSI] zfcp: remove all typedefs and replace them with standards\n [SCSI] zfcp: attach and release SAN nameserver port on demand\n [SCSI] zfcp: remove unused references, declarations and flags\n [SCSI] zfcp: Update message with input from review\n [SCSI] zfcp: add queue_full sysfs attribute\n [SCSI] scsi_dh: suppress comparison warning\n [SCSI] scsi_dh: add Dell product information into rdac device handler\n [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option\n [SCSI] qla2xxx: fix printk format warnings\n [SCSI] qla2xxx: Update version number to 8.02.01-k8.\n [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.\n [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.\n ...\n" }, { "commit": "e26feff647ef34423b048b940540a0059001ddb0", "tree": "acafe68602ee2f6f1a438c113073ffcc0040e949", "parents": [ "d403a6484f0341bf0624d17ece46f24f741b6a92", "b911e473d24633c19414b54b82b9ff0b1a2419d7" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 10 10:52:45 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 10 10:52:45 2008 -0700" }, "message": "Merge branch \u0027for-2.6.28\u0027 of git://git.kernel.dk/linux-2.6-block\n\n* \u0027for-2.6.28\u0027 of git://git.kernel.dk/linux-2.6-block: (132 commits)\n doc/cdrom: Trvial documentation error, file not present\n block_dev: fix kernel-doc in new functions\n block: add some comments around the bio read-write flags\n block: mark bio_split_pool static\n block: Find bio sector offset given idx and offset\n block: gendisk integrity wrapper\n block: Switch blk_integrity_compare from bdev to gendisk\n block: Fix double put in blk_integrity_unregister\n block: Introduce integrity data ownership flag\n block: revert part of d7533ad0e132f92e75c1b2eb7c26387b25a583c1\n bio.h: Remove unused conditional code\n block: remove end_{queued|dequeued}_request()\n block: change elevator to use __blk_end_request()\n gdrom: change to use __blk_end_request()\n memstick: change to use __blk_end_request()\n virtio_blk: change to use __blk_end_request()\n blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structure\n block: add lld busy state exporting interface\n block: Fix blk_start_queueing() to not kick a stopped queue\n include blktrace_api.h in headers_install\n ...\n" }, { "commit": "82219fceeb654789a9dd7cd3c6cce12dbf659342", "tree": "d00570c185471efd2c53ceae5d6e509db0603cf8", "parents": [ "3fa8749e584b55f1180411ab1b51117190bac1e5", "0395e61babd59c749fb5efe112affbfaa7d50eb7" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 10 07:46:45 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 10 07:46:45 2008 -0700" }, "message": "Merge branch \u0027upstream-2.6.28\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev\n\n* \u0027upstream-2.6.28\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:\n ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs\n libata-eh: clear UNIT ATTENTION after reset\n ata_piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list\n libata: reorder ata_device to remove 8 bytes of padding on 64 bits\n [libata] pata_bf54x: Add proper PM operation\n pata_sil680: convert CONFIG_PPC_MERGE to CONFIG_PPC\n libata: Implement disk shock protection support\n [libata] Introduce ata_id_has_unload()\n PATA: RPC now selects HAVE_PATA_PLATFORM for pata platform driver\n ata_piix: drop merged SCR access and use slave_link instead\n libata: implement slave_link\n libata: misc updates to prepare for slave link\n libata: reimplement link iterator\n libata: make SCR access ops per-link\n" }, { "commit": "4677735f03f5b6b6f2182f457a921855cadfb85b", "tree": "a5fc6c16ccb0a2050ea714f93f1ad79a8d1f9689", "parents": [ "0b6cb26c6686f1f24607c41f0a6d21ce54191710" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Sep 02 22:50:08 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:16 2008 +0200" }, "message": "sg: remove unnecessary blk_rq_unmap_user\n\nblk_rq_unmap_user in sg_finish_rem_req can take care of all the cases.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "0b6cb26c6686f1f24607c41f0a6d21ce54191710", "tree": "9b941224d5d2782e484c00e27e74aa2c2436e928", "parents": [ "c3919af2354fff673026dcbeac6f009d2ce5ceee" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Sep 02 22:50:07 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:15 2008 +0200" }, "message": "sg: remove sg_read_xfer\n\nsg_read_xfer was used to copy data to user space for READ\ncommands. blk_rq_unmap_user does the job so sg_read_xfer does nothing\nuseful.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "c3919af2354fff673026dcbeac6f009d2ce5ceee", "tree": "8504a35a3a247ec2a40578754aff2f3128294749", "parents": [ "626710c9d665ff381c7ec666b6a023f064ca5fef" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Sep 02 22:50:06 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:14 2008 +0200" }, "message": "sg: remove sg_write_xfer\n\nsg_write_xfer was used to copy data from user space for WRITE\ncommands. blk_rq_map_user_iov and blk_rq_map_user do the job so\nsg_write_xfer does nothing useful.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "626710c9d665ff381c7ec666b6a023f064ca5fef", "tree": "011b7b58f3a5868439eab36fd3b3e90952ccbef0", "parents": [ "44c7b0eaa041007066e30ab4869d5bbf8dad5989" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Sep 02 22:50:05 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:14 2008 +0200" }, "message": "sg: incorporate sg_build_direct into sg_start_req\n\nCalling blk_rq_map_user() at a single place is better than at\ndifferent two places. It makes the code more understandable.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "44c7b0eaa041007066e30ab4869d5bbf8dad5989", "tree": "4c127ab80d271c86c38ea3a382667e88f00b83ca", "parents": [ "fd1c1de0766844af4cfc39298e109ad273e72a9e" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Sep 02 22:50:04 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:14 2008 +0200" }, "message": "sg: remove __sg_start_req\n\n__sg_start_req() was used temporarily to call blk_get_request() during\nconverting sg to use the block layer.\n\nNow sg always calls blk_get_request() so we can move blk_get_request()\nto sg_start_req(). We don\u0027t need __sg_start_req anymore.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "fd1c1de0766844af4cfc39298e109ad273e72a9e", "tree": "ae4d03b3898a2ea65f99868660993b28b64a1542", "parents": [ "7e56cb0f7e7a132803ffefa0a5a15fb2079afaf1" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Sep 02 22:50:03 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:14 2008 +0200" }, "message": "sg: remove b_malloc_len in sg_scatter_hold struct\n\nIt\u0027s not used for anything useful after the block layer conversion.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "7e56cb0f7e7a132803ffefa0a5a15fb2079afaf1", "tree": "3747a89cca01a9ed95345981a194ee8802972df1", "parents": [ "a91a3a20e06621b9931793888583efe37db4e4e8" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Sep 02 22:50:02 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:14 2008 +0200" }, "message": "sg: remove SG_ALLOW_DIO_CODE define\n\nsg had lots of the own functions for the direct IO but now sg uses the\nblock layer functions for it. There are only five lines for the direct\nIO. SG_ALLOW_DIO_CODE define was used to compile out the direct IO\ncode but we don\u0027t need the define. If someone wants to remove the\ndirect IO code, he can do easily without the define.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "a91a3a20e06621b9931793888583efe37db4e4e8", "tree": "af515f0e87c438218e224e959692dbe3879248fb", "parents": [ "224cb3e981f1b2f9f93dbd49eaef505d17d894c2" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Sep 02 22:50:01 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:14 2008 +0200" }, "message": "sg: rename sg_cmd_done sg_rq_end_io\n\nold sg_rq_end_io() was used to wrap sg_cmd_done during converting sg\nto use the block layer (in order to cover the difference\nscsi_execute_async and blk_execute_rq_nowait). Now we don\u0027t need it so\nlet\u0027s remove it.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "242f9dcb8ba6f68fcd217a119a7648a4f69290e9", "tree": "1bfe245ffbc50d204d76665cd8f90d85100f86a1", "parents": [ "608aeef17a91747d6303de4df5e2c2e6899a95e8" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Sun Sep 14 05:55:09 2008 -0700" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:13 2008 +0200" }, "message": "block: unify request timeout handling\n\nRight now SCSI and others do their own command timeout handling.\nMove those bits to the block layer.\n\nInstead of having a timer per command, we try to be a bit more clever\nand simply have one per-queue. This avoids the overhead of having to\ntear down and setup a timer for each command, so it will result in a lot\nless timer fiddling.\n\nSigned-off-by: Mike Anderson \u003candmike@linux.vnet.ibm.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "f98a8cae12f2b2a8f9bfd7a53c990a1a405e880e", "tree": "3fcfd762a5841b8cbc5ab0987da8da3ee37a9201", "parents": [ "9bc3ffbfbdf71fefda8a261ef8d6fdc388a29b42" ], "author": { "name": "Andrew Patterson", "email": "andrew.patterson@hp.com", "time": "Thu Sep 04 14:27:35 2008 -0600" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:13 2008 +0200" }, "message": "SCSI sd driver calls revalidate_disk wrapper.\n\nModify the SCSI disk driver to call the revalidate_disk()\nwrapper. This allows us to do some housekeeping such as accounting for\na disk being resized online. The wrapper will call\nsd_revalidate_disk() at the appropriate time.\n\nSigned-off-by: Andrew Patterson \u003candrew.patterson@hp.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "fad7f01e61bf737fe8a3740d803f000db57ecac6", "tree": "d72959e6b5043bf3436f122ebcddb0c8f41d1acf", "parents": [ "818827669d85b84241696ffef2de485db46b0b5e" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Tue Sep 02 16:20:20 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:12 2008 +0200" }, "message": "sg: set dxferp to NULL for READ with the older SG interface\n\nWith the older SG interface, we don\u0027t know a user-space address to\ntrasfer data when executing a SCSI command. So we can\u0027t pass a\nuser-space address to blk_rq_map_user.\n\nThis patch fixes sg to pass a NULL user-space address to\nblk_rq_map_user so that it just sets up a request and bios with page\nframes propely without data transfer.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "01cfcddd98f09e05a2e36031654ed46643b76f23", "tree": "58bfbd3d70363e5a8d1c5822d27b29e2be93ad40", "parents": [ "879040742cf09f2360a9ac41846288707e4e567c" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Thu Aug 28 15:05:59 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:11 2008 +0200" }, "message": "sg: use blk_rq_aligned helper function\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: Douglas Gilbert \u003cdougg@torque.net\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "10db10d144c0248f285242f79daf6b9de6b00a62", "tree": "315806c8e09f6007bdc0c1dfeea1313f15815bfd", "parents": [ "6e5a30cba5e7c03b2cd564e968f1dd667a0f7c42" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Fri Aug 29 12:32:18 2008 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:10 2008 +0200" }, "message": "sg: convert the indirect IO path to use the block layer\n\nThis patch converts the indirect IO path (including mmap IO and old\nstruct sg_header) to use the block layer functions (blk_get_request,\nblk_execute_rq_nowait, blk_rq_map_user, etc) instead of\nscsi_execute_async().\n\n[Jens: fixed compile error with SCSI logging enabled]\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Douglas Gilbert \u003cdougg@torque.net\u003e\nCc: Mike Christie \u003cmichaelc@cs.wisc.edu\u003e\nCc: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "6e5a30cba5e7c03b2cd564e968f1dd667a0f7c42", "tree": "4a48fa4edc2a285a860b6f6771ae732c036143a5", "parents": [ "10865dfa34e7552c4c64606edcdf1e21a110c985" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Thu Aug 28 16:17:08 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:10 2008 +0200" }, "message": "sg: convert the direct IO path to use the block layer\n\nThis patch converts the direct IO path (SG_FLAG_DIRECT_IO) to use the\nblock layer functions (blk_get_request, blk_execute_rq_nowait,\nblk_rq_map_user, etc) instead of scsi_execute_async().\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Douglas Gilbert \u003cdougg@torque.net\u003e\nCc: Mike Christie \u003cmichaelc@cs.wisc.edu\u003e\nCc: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "10865dfa34e7552c4c64606edcdf1e21a110c985", "tree": "fe39b3528b667b3a0690246e7c05048dfcf8fd09", "parents": [ "152e283fdfea0cd11e297d982378b55937842dde" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Thu Aug 28 16:17:07 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:10 2008 +0200" }, "message": "sg: convert the non-data path to use the block layer\n\nThis patch converts the non data path to use the block layer functions\n(blk_get_request, blk_execute_rq_nowait, etc) instead of uses\nscsi_execute_async().\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Douglas Gilbert \u003cdougg@torque.net\u003e\nCc: Mike Christie \u003cmichaelc@cs.wisc.edu\u003e\nCc: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "152e283fdfea0cd11e297d982378b55937842dde", "tree": "a97a57108353f167a1e2911e8ee09c527ef42d3e", "parents": [ "a3bce90edd8f6cafe3f63b1a943800792e830178" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Thu Aug 28 16:17:06 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:10 2008 +0200" }, "message": "block: introduce struct rq_map_data to use reserved pages\n\nThis patch introduces struct rq_map_data to enable bio_copy_use_iov()\nuse reserved pages.\n\nCurrently, bio_copy_user_iov allocates bounce pages but\ndrivers/scsi/sg.c wants to allocate pages by itself and use\nthem. struct rq_map_data can be used to pass allocated pages to\nbio_copy_user_iov.\n\nThe current users of bio_copy_user_iov simply passes NULL (they don\u0027t\nwant to use pre-allocated pages).\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nCc: Douglas Gilbert \u003cdougg@torque.net\u003e\nCc: Mike Christie \u003cmichaelc@cs.wisc.edu\u003e\nCc: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "a3bce90edd8f6cafe3f63b1a943800792e830178", "tree": "c07a2962987e57997b4ff6f6c63febe1feaa0a9c", "parents": [ "45333d5a31296d0af886d94f1d08f128231cab8e" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Thu Aug 28 16:17:05 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:10 2008 +0200" }, "message": "block: add gfp_mask argument to blk_rq_map_user and blk_rq_map_user_iov\n\nCurrently, blk_rq_map_user and blk_rq_map_user_iov always do\nGFP_KERNEL allocation.\n\nThis adds gfp_mask argument to blk_rq_map_user and blk_rq_map_user_iov\nso sg can use it (sg always does GFP_ATOMIC allocation).\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Douglas Gilbert \u003cdougg@torque.net\u003e\nCc: Mike Christie \u003cmichaelc@cs.wisc.edu\u003e\nCc: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "3e1a7ff8a0a7b948f2684930166954f9e8e776fe", "tree": "0a8642f5cdbc6ddfdd66dc7241c915e57b3cb7ff", "parents": [ "689d6fac40b41c7bf154f362deaf442548e4dc81" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon Aug 25 19:56:17 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:08 2008 +0200" }, "message": "block: allow disk to have extended device number\n\nNow that disk and partition handlings are mostly unified, it\u0027s easy to\nallow disk to have extended device number. This patch makes\nadd_disk() use extended device number if disk-\u003eminors is zero. Both\nsd and ide-disk are updated to use this.\n\n* sd_format_disk_name() is implemented which can generically determine\n the drive name. This removes disk number restriction stemming from\n limited device names.\n\n* If sd index goes over SD_MAX_DISKS (which can be increased now BTW),\n sd simply doesn\u0027t initialize minors letting block layer choose\n extended device number.\n\n* If CONFIG_DEBUG_EXT_DEVT is set, both sd and ide-disk always set\n minors to 0 and use extended device numbers.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "689d6fac40b41c7bf154f362deaf442548e4dc81", "tree": "5989dc5767f657272194ee8c7d69c6db1e62dab7", "parents": [ "540eed5637b766bb1e881ef744c42617760b4815" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon Aug 25 19:56:16 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:08 2008 +0200" }, "message": "block: replace @ext_minors with GENHD_FL_EXT_DEVT\n\nWith previous changes, it\u0027s meaningless to limit the number of\npartitions. Replace @ext_minors with GENHD_FL_EXT_DEVT such that\nsetting the flag allows the disk to have maximum number of allowed\npartitions (only limited by the number of entries in parsed_partitions\nas determined by MAX_PART constant).\n\nThis kills not-too-pretty alloc_disk_ext[_node]() functions and makes\n@minors parameter to alloc_disk[_node]() unnecessary. The parameter\nis left alone to avoid disturbing the users.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "870d6656126add8e383645732b03df2b7ccd4f94", "tree": "9c33dd91350ea163b160d9f5cb40d913c5caf268", "parents": [ "f615b48cc7df7cac3865ec76ac1a5bb04d3e07f4" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon Aug 25 19:47:25 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:06 2008 +0200" }, "message": "block: implement CONFIG_DEBUG_BLOCK_EXT_DEVT\n\nExtended devt introduces non-contiguos device numbers. This patch\nimplements a debug option which forces most devt allocations to be\nfrom the extended area and spreads them out. This is enabled by\ndefault if DEBUG_KERNEL is set and achieves...\n\n1. Detects code paths in kernel or userland which expect predetermined\n consecutive device numbers.\n\n2. When something goes wrong, avoid corruption as adding to the minor\n of earlier partition won\u0027t lead to the wrong but valid device.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "f615b48cc7df7cac3865ec76ac1a5bb04d3e07f4", "tree": "a61ba32641118296ecc942814e03b4b0ababfa63", "parents": [ "1f0142905d4812966831613847db38a66da29eb8" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon Aug 25 19:47:24 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:06 2008 +0200" }, "message": "sd/ide-disk: apply extended minors to sd and ide\n\nUpdate sd and ide-disk such that they can take advantage of extended\nminors.\n\nide-disk already has 64 minors per device and currently doesn\u0027t use\nextended minors although after this patch it can be turned on by\nsimply tweaking constants.\n\nsd only had 16 minors per device causing problems on certain peculiar\nconfigurations. This patch lifts the restriction and enables it to\nuse upto 64 minors.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "f331c0296f2a9fee0d396a70598b954062603015", "tree": "f74c467d58940131d97d90c4ea549843185e6ef0", "parents": [ "cf771cb5a7b716f3f9e532fd42a1e3a0a75adec5" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Wed Sep 03 09:01:48 2008 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 09 08:56:05 2008 +0200" }, "message": "block: don\u0027t depend on consecutive minor space\n\n* Implement disk_devt() and part_devt() and use them to directly\n access devt instead of computing it from -\u003emajor and -\u003efirst_minor.\n\n Note that all references to -\u003emajor and -\u003efirst_minor outside of\n block layer is used to determine devt of the disk (the part0) and as\n -\u003emajor and -\u003efirst_minor will continue to represent devt for the\n disk, converting these users aren\u0027t strictly necessary. However,\n convert them for consistency.\n\n* Implement disk_max_parts() to avoid directly deferencing\n genhd-\u003eminors.\n\n* Update bdget_disk() such that it doesn\u0027t assume consecutive minor\n space.\n\n* Move devt computation from register_disk() to add_disk() and make it\n the only one (all other usages use the initially determined value).\n\nThese changes clean up the code and will help disk-\u003epart dereference\nfix and extended block device numbers.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "7ae628d9d21a088b4a2d26a9d39c29c0acd2d03b", "tree": "18df26e44530e372af91a4353b754816195bc74d", "parents": [ "650849d71ca05d55a1553fe42fb21af9dce5612b" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Tue Sep 23 07:58:59 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 12:11:51 2008 -0500" }, "message": "[SCSI] scsi_dh: suppress comparison warning\n\nOn Mon, 2008-09-22 at 14:56 -0700, akpm@linux-foundation.org wrote:\n\u003e From: Andrew Morton \u003cakpm@linux-foundation.org\u003e\n\u003e\n\u003e s390:\n\u003e\n\u003e drivers/scsi/device_handler/scsi_dh_emc.c: In function \u0027parse_sp_info_reply\u0027:\n\u003e drivers/scsi/device_handler/scsi_dh_emc.c:179: warning: comparison is always false due to limited range of data type\n\u003e\n\u003e because chars are unsigned, I assume.\n\nFix by making csdev-\u003ebuffer explicitly an unsigned char and dropping\nthe \u003c 0 test.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "650849d71ca05d55a1553fe42fb21af9dce5612b", "tree": "ff264cc8cc085caa37102737cf776b03eada6c8b", "parents": [ "b78ded89156827b50729518b1d13fea6defb46ee" ], "author": { "name": "Yanqing_Liu@Dell.com", "email": "Yanqing_Liu@Dell.com", "time": "Thu Oct 02 12:18:33 2008 -0500" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 12:11:51 2008 -0500" }, "message": "[SCSI] scsi_dh: add Dell product information into rdac device handler\n\nAdd Dell Powervault storage arrays into device list of rdac device\nhandler.\n\nSigned-off-by: Yanqing Liu \u003cyanqing_liu@dell.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "b78ded89156827b50729518b1d13fea6defb46ee", "tree": "a245d80c2d43303d1ba619f36faead27a4204f04", "parents": [ "4a3e1ea8b2f25f962e91883be880de678bad8e3e" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Mon Sep 22 14:56:49 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 12:11:51 2008 -0500" }, "message": "[SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option\n\nThis option was forgotten when the SCSI_QLOGIC_FC driver was removed.\n\nReported-by: Robert P. J. Day \u003crpjday@crashcourse.ca\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "4a3e1ea8b2f25f962e91883be880de678bad8e3e", "tree": "348f735f45ddf9e15b8749bcba37b5cd923b46d7", "parents": [ "36d1cdcffbbb33b966d6bdd6534bb03c22b3fd0c" ], "author": { "name": "Alexander Beregalov", "email": "a.beregalov@gmail.com", "time": "Thu Sep 18 04:09:57 2008 +0400" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:19 2008 -0500" }, "message": "[SCSI] qla2xxx: fix printk format warnings\n\nSigned-off-by: Alexander Beregalov \u003ca.beregalov@gmail.com\u003e\nAcked-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "36d1cdcffbbb33b966d6bdd6534bb03c22b3fd0c", "tree": "ae066955c81a051faa7efe7bc7c8dca78c2fa279", "parents": [ "59d72d873ccfaf59e9ceea1487459f5a57c0d504" ], "author": { "name": "Andrew Vasquez", "email": "andrew.vasquez@qlogic.com", "time": "Thu Sep 11 21:22:54 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:19 2008 -0500" }, "message": "[SCSI] qla2xxx: Update version number to 8.02.01-k8.\n\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "59d72d873ccfaf59e9ceea1487459f5a57c0d504", "tree": "f3b69428118345934784c5f6e1b1c8c2871bc3ec", "parents": [ "2d136938792ba04bf3b6bb2d3a2807dc05c396fc" ], "author": { "name": "Ravi Anand", "email": "ravi.anand@qlogic.com", "time": "Thu Sep 11 21:22:53 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:19 2008 -0500" }, "message": "[SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.\n\nAs the driver is only interested in bits 0-9 of the 1st\nRSCN-payload word:\n\n\trsvd[15:14]RscnEventQualifier[13:10]Fmt[9:8]Domain[7:0]\n\tArea[15:8]Alpa[7:0]\n\nSigned-off-by: Ravi Anand \u003cravi.anand@qlogic.com\u003e\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "2d136938792ba04bf3b6bb2d3a2807dc05c396fc", "tree": "58a64c2e78445da6d6af037128df3d5c4409e525", "parents": [ "cc3ef7bc40bbede7bbd0bb395d6452a575e95efe" ], "author": { "name": "Andrew Vasquez", "email": "andrew.vasquez@qlogic.com", "time": "Thu Sep 11 21:22:52 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:18 2008 -0500" }, "message": "[SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.\n\nAdd additional tightening of residual-count handling (originally\nfrom commit 6acf8190025e9c4ea513d4084ff089d476112816) where the\ndriver should discard any lower SCSI-status during\nfirmware/transport residual-count mismatches.\n\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "cc3ef7bc40bbede7bbd0bb395d6452a575e95efe", "tree": "4bd0828af309ed6fe7d8d5d0cdebb11e8accb429", "parents": [ "272976ca186982f7bbc4f22876c53d6c9f7b6e32" ], "author": { "name": "Bjorn Helgaas", "email": "bjorn.helgaas@hp.com", "time": "Thu Sep 11 21:22:51 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:18 2008 -0500" }, "message": "[SCSI] qla2xxx: Fix \"occured\" spelling errors.\n\nFix \"occured\" spelling errors. Most of these are in comments, which\nI wouldn\u0027t normally bother with, but a couple are in printks, which\nirritate me more. So I just fixed them all at the same time.\n\nSigned-off-by: Bjorn Helgaas \u003cbjorn.helgaas@hp.com\u003e\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "272976ca186982f7bbc4f22876c53d6c9f7b6e32", "tree": "a0e3ecbf54d24da4ccccf881a60a2b788ac7c455", "parents": [ "c00d8994d91e51aa6b891ad0e877f66cc1011de2" ], "author": { "name": "Andrew Vasquez", "email": "andrew.vasquez@qlogic.com", "time": "Thu Sep 11 21:22:50 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:18 2008 -0500" }, "message": "[SCSI] qla2xxx: Add NPIV-Config Table support.\n\nTo instatiate pre-configured vport entities defined within an\nHBA\u0027s flash memory.\n\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "c00d8994d91e51aa6b891ad0e877f66cc1011de2", "tree": "5c200c361fffd2d8ac48572b22db0c9cd8b55451", "parents": [ "4b89258c7320bab4155b692e76ae9ffdd85e79be" ], "author": { "name": "Andrew Vasquez", "email": "andrew.vasquez@qlogic.com", "time": "Thu Sep 11 21:22:49 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:17 2008 -0500" }, "message": "[SCSI] qla2xxx: Add Flash Layout Table support.\n\nThe Flash Layout Table (FLT) present on many recent HBAs encodes\nflash usage information, organizes data stored into separate\nregions and presents the information uniformly to the driver.\nUse this information rather than using specific hard-coded values\nbased on ISP type.\n\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "4b89258c7320bab4155b692e76ae9ffdd85e79be", "tree": "1bccaace5ae1e4d3714cb2d71d38f98f93ee833c", "parents": [ "49fd462a1ba4a1b9bfbfe01d279d506017d85492" ], "author": { "name": "Andrew Vasquez", "email": "andrew.vasquez@qlogic.com", "time": "Thu Sep 11 21:22:48 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:17 2008 -0500" }, "message": "[SCSI] qla2xxx: Change GFP_ATOMIC to GFP_KERNEL for non-atomic allocations.\n\nBoth call-sites are sleeping-capable.\n\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "49fd462a1ba4a1b9bfbfe01d279d506017d85492", "tree": "d54078974b8a464196867a1ca1b89f7a1ce8364d", "parents": [ "ac26d41dee65167109e7cdcd0289b44ca61cd741" ], "author": { "name": "Harish Zunjarrao", "email": "harish.zunjarrao@qlogic.com", "time": "Thu Sep 11 21:22:47 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:16 2008 -0500" }, "message": "[SCSI] qla2xxx: Add input/output byte-count statistics.\n\nCurrently Firmware does not have counters for input megabytes and\noutput megabytes, therefore driver counts these values depending\non the status of the scsi command and direction of the command.\nThe values are exported in the FC_HOST path.\n\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "ac26d41dee65167109e7cdcd0289b44ca61cd741", "tree": "45f1b872cd3323fe1fbf244a85d91b8e8fd39b14", "parents": [ "a7bbb57333447d0cf950992653b6b079585f3531" ], "author": { "name": "Mike Christie", "email": "michaelc@cs.wisc.edu", "time": "Sat Sep 06 08:39:15 2008 -0500" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:16 2008 -0500" }, "message": "[SCSI] libiscsi: return error passed in during iscsi recovery\n\nDue to patch building error on my side, we are still passing DID_BUS_BUSY\nfor commands that are running, when we want to return whatever the caller\nof fail_all_commands wanted. This replaces the hardcoded error code with\nthe value that is passed in.\n\nSigned-off-by: Mike Christie \u003cmichaelc@cs.wisc.edu\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "a30c3f69e6336cb9b09a989595e417367e4e9b1b", "tree": "219211924d44553b97579682cd8c27750b47b631", "parents": [ "7404ad3b6d04efbd918e9e2e776bf560fbedf47d" ], "author": { "name": "Andrew Vasquez", "email": "andrew.vasquez@qlogic.com", "time": "Fri Jul 18 08:32:52 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:15 2008 -0500" }, "message": "[SCSI] fc_transport: Add an API to allow an LLD to create vports\n\nThere\u0027s already a fc_vport_termintate() call exported by\nthe transport. This patch adds a symmetric call to the API to allow\nan NPIV-capable LLD to instantiate vports sans user intervention.\n\nAdditional comments/updates:\n\n Re: scsi_fc_transport.txt\n Add a function prototype for fc_vport_terminate similar to what\u0027s\n done for fc_vport_create\n\n Re: fc_vport_create\n I recommend we pass the channel number in fc_vport_create rather\n than fixing it at zero.\n\n Also, ids-\u003evport_type should be set to FC_PORTTYPE_NPIV prior to\n calling fc_vport_create. The comment is also meaningless.\n\nAdded-by and\nSigned-off-by: James Smart \u003cjames.smart@emulex.com\u003e\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "7404ad3b6d04efbd918e9e2e776bf560fbedf47d", "tree": "d2f85a9230d78272329aa522d71068cefbbef7cb", "parents": [ "3c9f3681d0b4af09c1cbf04f92fdfb72bd81ad7b" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Sun Aug 31 10:41:52 2008 -0500" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:15 2008 -0500" }, "message": "[SCSI] sd: use generic helper to print capacities in both binary and SI\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "114f1ea408944f9515e45aa7452238fb15a1fa00", "tree": "9b7bfcce3c244c3cb329e4709ad40e140763f113", "parents": [ "6f4267e3bd1211b3d09130e626b0b3d885077610" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Mon Aug 25 13:51:58 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:14 2008 -0500" }, "message": "[SCSI] scsi_dh: no need to initialize rq-\u003ecmd with blk_get_request\n\nblk_get_request initializes rq-\u003ecmd (rq_init does) so the users don\u0027t\nneed to do that.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Chandra Seetharaman \u003csekharan@us.ibm.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "6f4267e3bd1211b3d09130e626b0b3d885077610", "tree": "e9350f919238866c3bcd9c340ffea639a0c5de1d", "parents": [ "0f1d87a2acb8fd1f2ef8af109a785123ddc1a6cb" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Aug 22 16:53:31 2008 -0500" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:13 2008 -0500" }, "message": "[SCSI] Update the SCSI state model to allow blocking in the created state\n\nBrian King \u003cbrking@linux.vnet.ibm.com\u003e reported that fibre channel\ndevices can oops during scanning if their ports block (because the\ndevice goes from CREATED -\u003e BLOCK -\u003e RUNNING rather than CREATED -\u003e\nBLOCK -\u003e CREATED).\n\nFix this by adding a new state: CREATED_BLOCK which can only transition\nback to CREATED and disallow the CREATED -\u003e BLOCK transition. Now both\nthe created and blocked states that the mid-layer recognises can include\nCREATED_BLOCK.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "0f1d87a2acb8fd1f2ef8af109a785123ddc1a6cb", "tree": "c59113a5f6ba81983e1bc4abad235436b1842f28", "parents": [ "22447be7d15aefcfab84e9bec4859a28198b0c62" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Aug 22 16:43:59 2008 -0500" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:13 2008 -0500" }, "message": "[SCSI] add inline functions for recognising created and blocked states\n\nThe created and blocked states are very shortly going to correspond to\nmixed sdev_state states.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "22447be7d15aefcfab84e9bec4859a28198b0c62", "tree": "7bb58323dfdbfbc85759c668a876b85d2084a3da", "parents": [ "557cc476c04146ee610f4bc77bfe20ce1c823d7c" ], "author": { "name": "James Smart", "email": "James.Smart@Emulex.Com", "time": "Fri Aug 08 02:14:18 2008 -0400" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:13 2008 -0500" }, "message": "[SCSI] scsi_netlink: Add transport and LLD recieve and event support\n\nThis patch adds scsi netlink recieve and event support for transport\nand scsi LLDD\u0027s. It is a reimplementation of the patch posted last\nweek by David Somayajulu.\nhttp://marc.info/?l\u003dlinux-scsi\u0026m\u003d121745486221819\u0026w\u003d2\n\nThere are a few things done differently:\n\n- Transport support is included\n\n- Event delivery is included\n\n- The vendor message is now its own unique message type, considered\n part of the generic \"SCSI Transport\".\n\n- LLDD entry points are now registered rather than included in the\n scsi_host_template.\n\n Background: When I started to implement the event handler via template,\n I had to either: muck up scsi_add_host and scsi_remove_host; or have\n the event handler search all possible shosts. Neither was acceptable.\n Moving to a registration solves this, and also limits the scope of\n the changes to something that could be backported to a distro without\n breaking an already-released-distro kabi. However, I admit it isn\u0027t\n as elegant, as the passing of the LLDD host template in the\n registration and the complexity around dynamic add/remove shows.\n\n- The receive path was augmented to require a unique identifier for\n the LLDD before the message was allowed to be handed off to the\n driver. Given how quickly very fatal errors occur if there\u0027s msg\n mismatches (which I saw in testing my own tools :), I believe this\n to be a very good thing. The id plays off the vendor id scheme already\n introduced for the vendor unique event messages used by FC.\n Additionally, the id use as the basis of the registration/deregistration.\n\n- Send assist functions, for both the transport and LLDDs are included.\n\n[fujita.tomonori@lab.ntt.co.jp: fix missing cast]\nSigned-off-by: James Smart \u003cjames.smart@emulex.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "557cc476c04146ee610f4bc77bfe20ce1c823d7c", "tree": "2d9188af6a488f98fff34cd9294a4ca7134e4767", "parents": [ "3fd7f938831b7f2e7b6103118ad1a455f6f03110" ], "author": { "name": "Nick Warne", "email": "nick@ukfsn.org", "time": "Sun Aug 17 00:00:44 2008 +0200" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:12 2008 -0500" }, "message": "[SCSI] tmscsim: Fixup KERN_INFO in printk\n\nMultiline kernel messages should contain a priority in every line,\nbesides, some log daemons represent a tabulator as \"^I\", fix both these\nissues.\n\nSigned-off-by: Nick Warne \u003cnick@ukfsn.org\u003e\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "3fd7f938831b7f2e7b6103118ad1a455f6f03110", "tree": "acc1363073ba6175bee37f77cb878bcf34cea587", "parents": [ "315cb0ad124575e75da2d0e0a95990587fc23485" ], "author": { "name": "Matthew Wilcox", "email": "matthew@wil.cx", "time": "Wed Aug 13 21:36:55 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:12 2008 -0500" }, "message": "[SCSI] qla2xxx: Remove semaphore.h\n\nNow that qla2xxx has been converted to mutexes, it no longer needs the\nsemaphore include.\n\nSigned-off-by: Matthew Wilcox \u003cwilly@linux.intel.com\u003e\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "315cb0ad124575e75da2d0e0a95990587fc23485", "tree": "1efbc6b9b744163bb542ea3eec87bdb4786b598a", "parents": [ "6f92a6a7ddba5ae7ca0f0255d46410465dcf2ba6" ], "author": { "name": "James Smart", "email": "James.Smart@Emulex.Com", "time": "Thu Aug 07 20:49:30 2008 -0400" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Oct 03 11:46:12 2008 -0500" }, "message": "[SCSI] scsi_host_lookup: error returns and NULL pointers\n\nThis patch cleans up the behavior of scsi_host_lookup().\n\nThe original implementation attempted to use the dual role of\neither returning a pointer value, or a negative error code.\nUser\u0027s needed to use IS_ERR() to check the result. Additionally,\nthe IS_ERR() macro never checks for when a NULL pointer was\nreturned, so a NULL pointer actually passes with a success case.\nNote: scsi_host_get(), used by scsi_host_lookup(), can return\na NULL pointer.\n\nTalk about a mudhole for the unitiated to step into....\n\nThis patch converts scsi_host_lookup() to return either NULL\nor a valid pointer. The consumers were updated for the change.\n\nSigned-off-by: James Smart \u003cjames.smart@emulex.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "82ef04fb4c82542b3eda81cca461f0594ce9cd0b", "tree": "e513df5ad8dc9f7400830bfc8786afb6bec90fb6", "parents": [ "6ef190cc92e33565accff6a320f0e7d90480bfe7" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Thu Jul 31 17:02:40 2008 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Mon Sep 29 00:22:28 2008 -0400" }, "message": "libata: make SCR access ops per-link\n\nLogically, SCR access ops should take @link; however, there was no\ncompelling reason to convert all SCR access ops when adding @link\nabstraction as there\u0027s one-to-one mapping between a port and a non-PMP\nlink. However, that assumption won\u0027t hold anymore with the scheduled\naddition of slave link.\n\nMake SCR access ops per-link.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "c9eeb248f3b44939532a9716bc06413383aa5d63", "tree": "551add90abf50c42b6a3ffcdf487a49ed9dfd2c4", "parents": [ "44ea91c597ae4641d9ac21b8bbba0795d2f4261e" ], "author": { "name": "Boaz Harrosh", "email": "bharrosh@panasas.com", "time": "Wed Sep 24 12:00:22 2008 +0300" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Sun Sep 28 17:10:40 2008 -0500" }, "message": "[SCSI] qlogicpti: fix sg list traversal error in continuation entries\n\nThe current sg list traversal logic for the continuation entries\ndoesn\u0027t advance the list pointer once all seven slots are used, so the\nnext continuation entry (if there is one) wrongly begins again at the\nstart of the sg list.\n\nFix by advancing the sg pointer after the for_each_sg().\n\nReported-by: Meelis Roos \u003cmroos@ut.ee\u003e\nCc: David Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "44ea91c597ae4641d9ac21b8bbba0795d2f4261e", "tree": "93a373ec24d3a290533bbcce1e7d038a6fb81179", "parents": [ "048feec5548c0582ee96148c61b87cccbcb5f9be" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Sat Sep 20 00:31:50 2008 +0000" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Tue Sep 23 12:29:01 2008 -0700" }, "message": "[SCSI] Fix hang with split requests\n\nSometimes, particularly for USB devices with the last sector bug,\nrequests get completed in chunks. There\u0027s a bug in this in that if\none of the chunks gets an error, we complete that chunk with an error\nbut never move on to the remaining ones, leading to the request\nhanging (because it\u0027s not fully completed).\n\nFix this by completing all remaining chunks if an error is encountered.\n\nCc: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "2e57572a50a4de41c6cbc879a4866a312d4cd316", "tree": "c4f58ec96c06642c4b415b881d3f0a3b673d5b44", "parents": [ "9b2e43ae4e9609f80034dfe8de895045cac52d77", "f948cc6ab9e61a8e88d70ee9aafc690e6d26f92c" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Sep 16 14:11:43 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Sep 16 14:11:43 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6\n\nConflicts:\n\n\tarch/sparc64/kernel/pci_psycho.c\n" }, { "commit": "048feec5548c0582ee96148c61b87cccbcb5f9be", "tree": "aedac3da0b10199ffb198a8d900cea43063d7194", "parents": [ "a551b98d5f6fce5897d497abd8bfb262efb33d2a" ], "author": { "name": "Andrew Vasquez", "email": "andrew.vasquez@qlogic.com", "time": "Thu Sep 11 22:19:45 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Sat Sep 13 13:12:58 2008 -0500" }, "message": "[SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes.\n\nJosip Rodin noted\n(http://article.gmane.org/gmane.linux.ports.sparc/10152) the\ndriver oopsing during registration of an rport to the\nFC-transport layer with a backtrace indicating a dereferencing of\nan shost-\u003eshost_data equal to NULL. David Miller identified a\nsmall window in driver logic where this could happen:\n\n \u003e Look at how the driver registers the IRQ handler before the host has\n \u003e been registered with the SCSI layer.\n \u003e\n \u003e That leads to a window of time where the shost hasn\u0027t been setup\n \u003e fully, yet ISRs can come in and trigger DPC thread events, such as\n \u003e loop resyncs, which expect the transport area to be setup.\n \u003e\n \u003e But it won\u0027t be setup, because scsi_add_host() hasn\u0027t finished yet.\n \u003e\n \u003e Note that in Josip\u0027s crash log, we don\u0027t even see the\n \u003e\n \u003e qla_printk(KERN_INFO, ha, \"\\n\"\n \u003e \" QLogic Fibre Channel HBA Driver: %s\\n\"\n \u003e \" QLogic %s - %s\\n\"\n \u003e \" ISP%04X: %s @ %s hdma%c, host#\u003d%ld, fw\u003d%s\\n\",\n \u003e ...\n \u003e\n \u003e message yet.\n \u003e\n \u003e Which means that the crash occurs between qla2x00_request_irqs()\n \u003e and printing that message.\n\nClose this window by enabling RISC interrupts after the host has\nbeen registered with the SCSI midlayer.\n\nReported-by: Josip Rodin \u003cjoy@entuzijast.net\u003e\nCc: Stable Tree \u003cstable@kernel.org\u003e\nSigned-off-by: Andrew Vasquez \u003candrew.vasquez@qlogic.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "6d242a263618ba7f0f9a41dd91b347d19e704bbe", "tree": "1c532ca96d543bd2335a5915d9c7646ffe776eba", "parents": [ "a0a4a2cb0d69446c084792a40884d911dfc3cf27", "2dc75d3c3b49c64fd26b4832a7efb75546cb3fc5" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 11 08:42:55 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 11 08:42:55 2008 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.dk/linux-2.6-block\n\n* \u0027for-linus\u0027 of git://git.kernel.dk/linux-2.6-block:\n block: disable sysfs parts of the disk command filter\n" }, { "commit": "29cd195e078db0d90dd447a156039513ecdd8f16", "tree": "597d84bcde72b5710d5b178f4aadb484f9e83172", "parents": [ "c529b7e2db948e240c48c54a83d0b6279275e57d", "01b291bd66564b4bd826326af6bd0b6d17e99439" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 11 08:41:17 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 11 08:41:17 2008 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:\n [SCSI] fix check of PQ and PDT bits for WLUNs\n [SCSI] make scsi_check_sense HARDWARE_ERROR return ADD_TO_MLQUEUE on retry\n [SCSI] scsi_dh: make check_sense return ADD_TO_MLQUEUE\n [SCSI] zfcp: Remove duplicated unlikely() macros.\n [SCSI] zfcp: channel cannot be detached due to refcount imbalance\n [SCSI] zfcp: Fix reference counter for remote ports\n [SCSI] zfcp: Simplify ccw notify handler\n [SCSI] zfcp: Correctly query end flag in gpn_ft response\n [SCSI] zfcp: Fix request queue locking\n [SCSI] sd: select CRC_T10DIF only when necessary\n" }, { "commit": "2dc75d3c3b49c64fd26b4832a7efb75546cb3fc5", "tree": "908ae81851ca06d46a680d8e6c33afdfb292c131", "parents": [ "adee14b2e1557d0a8559f29681732d05a89dfc35" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Sep 11 14:20:23 2008 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Sep 11 14:20:23 2008 +0200" }, "message": "block: disable sysfs parts of the disk command filter\n\nWe still have life time issues with the sysfs command filter kobject,\nso disable it for 2.6.27 release. We can revisit this and make it work\nproperly for 2.6.28, for 2.6.27 release it\u0027s too risky.\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "fd098316ef533e8441576f020ead4beab93154ce", "tree": "6188bbbf2357585dbeeac9d055ef2e771b78bac8", "parents": [ "933b2a1d8d458d6fe12b5efd63a0432852c44d6d" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 31 01:23:17 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 31 01:23:17 2008 -0700" }, "message": "sparc: Annotate of_device_id arrays with const or __initdata.\n\nAs suggested by Stephen Rothwell.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "01b291bd66564b4bd826326af6bd0b6d17e99439", "tree": "89ba1f339a68827c1ea0e434629759a9252b0a69", "parents": [ "bb0003c1e189d5766b6b39299b08c690c985c4dc" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Thu Aug 21 15:14:14 2008 -0500" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Aug 29 09:19:11 2008 -0500" }, "message": "[SCSI] fix check of PQ and PDT bits for WLUNs\n\nFor IBM z series certain LUNs can no longer be accessed.\n\nThis is because kernel version 2.6.19 a check was introduced not to\ncreate a generic SCSI device for devices that return PQ\u003d1 and\nPDT\u003d0x1f. For WLUNs (see SAM-3, p. 41ff) generic SCSI devices should\nbe created unconditionally without looking at the PQ bit, so add a\ncheck for WLUNs in with this test.\n\nAcked-by: Martin Petermann \u003cmartin@linux.vnet.ibm.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "bb0003c1e189d5766b6b39299b08c690c985c4dc", "tree": "ad7f0bcf14bf769df0e9d2188b0d00c2e02bccd8", "parents": [ "c7dbb627a2505f42b2e6b3581f3716d73453dd0c" ], "author": { "name": "Mike Anderson", "email": "andmike@linux.vnet.ibm.com", "time": "Tue Aug 12 12:11:58 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Aug 29 09:15:06 2008 -0500" }, "message": "[SCSI] make scsi_check_sense HARDWARE_ERROR return ADD_TO_MLQUEUE on retry\n\nChange scsi_check_sense HARDWARE_ERROR check to return ADD_TO_MLQUEUE\nif device-\u003eretry_hwerror is set to allow retries to occur without\nrestriction of blk_noretry_request check.\n\nSigned-off-by: Mike Anderson \u003candmike@linux.vnet.ibm.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "c7dbb627a2505f42b2e6b3581f3716d73453dd0c", "tree": "15e1f8f906a9221b13c66b37ea2963e29b2bd888", "parents": [ "025270f0eaa2def673747ed6f77cca41f694f354" ], "author": { "name": "Mike Anderson", "email": "andmike@linux.vnet.ibm.com", "time": "Tue Aug 12 12:11:57 2008 -0700" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Aug 29 09:13:51 2008 -0500" }, "message": "[SCSI] scsi_dh: make check_sense return ADD_TO_MLQUEUE\n\nChange scsi_dh check_sense functions to return ADD_TO_MLQUEUE\nto allow retries to occur without restriction of blk_noretry_request\ncheck.\n\nSigned-off-by: Mike Anderson \u003candmike@linux.vnet.ibm.com\u003e\nAcked-by: Chandra Seetharaman \u003csekharan@us.ibm.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "bfad9ceac5d11318c99ae8a0d1e926a380a56edd", "tree": "cd09be326dac4f0982872a59d0b6b512bc8a390d", "parents": [ "24342c34a022ee90839873d91396045e12ef1090" ], "author": { "name": "Stefan Richter", "email": "stefanr@s5r6.in-berlin.de", "time": "Sat Aug 02 19:49:40 2008 +0200" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Fri Aug 29 08:59:50 2008 -0500" }, "message": "[SCSI] sd: select CRC_T10DIF only when necessary\n\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\nAcked-by: \"Martin K. Petersen\" \u003cmartin.petersen@oracle.com\u003e\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "bb23b431db7405f6d79f989ad0236bf6428ba1cb", "tree": "481c179e97bf72b206e51ef594c7bb3fb32af72f", "parents": [ "24342c34a022ee90839873d91396045e12ef1090" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Fri Aug 29 11:47:07 2008 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Fri Aug 29 11:47:07 2008 +0200" }, "message": "remove blk_register_filter and blk_unregister_filter in gendisk\n\nThis patch remove blk_register_filter and blk_unregister_filter in\ngendisk, and adds them to sd.c, sr.c. and ide-cd.c\n\nThe commit abf5439370491dd6fbb4fe1a7939680d2a9bc9d4 moved cmdfilter\nfrom gendisk to request_queue. It turned out that in some subsystems\nmultiple gendisks share a single request_queue. So we get:\n\nUsing physmap partition information\nCreating 3 MTD partitions on \"physmap-flash\":\n0x00000000-0x01c00000 : \"User FS\"\n0x01c00000-0x01c40000 : \"booter\"\nkobject (8511c410): tried to init an initialized object, something is seriously wrong.\nCall Trace:\n[\u003c8036644c\u003e] dump_stack+0x8/0x34\n[\u003c8021f050\u003e] kobject_init+0x50/0xcc\n[\u003c8021fa18\u003e] kobject_init_and_add+0x24/0x58\n[\u003c8021d20c\u003e] blk_register_filter+0x4c/0x64\n[\u003c8021c194\u003e] add_disk+0x78/0xe0\n[\u003c8027d14c\u003e] add_mtd_blktrans_dev+0x254/0x278\n[\u003c8027c8f0\u003e] blktrans_notify_add+0x40/0x78\n[\u003c80279c00\u003e] add_mtd_device+0xd0/0x150\n[\u003c8027b090\u003e] add_mtd_partitions+0x568/0x5d8\n[\u003c80285458\u003e] physmap_flash_probe+0x2ac/0x334\n[\u003c802644f8\u003e] driver_probe_device+0x12c/0x244\n[\u003c8026465c\u003e] __driver_attach+0x4c/0x84\n[\u003c80263c64\u003e] bus_for_each_dev+0x58/0xac\n[\u003c802633ec\u003e] bus_add_driver+0xc4/0x24c\n[\u003c802648e0\u003e] driver_register+0xcc/0x184\n[\u003c80100460\u003e] _stext+0x60/0x1bc\n\nIn the long term, we need to fix such subsystems but we need a quick\nfix now. This patch add the command filter support to only sd and sr\nthough it might be useful for other SG_IO users (such as cciss).\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nReported-by: Manuel Lauss \u003cmano@roarinelk.homelinux.net\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "5dc2536bb8d8adb5fdfbe76cd6fdcdf9de3f40f8", "tree": "6b6c77764cd486adc7ec072f4712d35361e83b1e", "parents": [ "05bb5e93f2ef3f14e0c5a7e9281d07e7a7e4233d" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 27 00:24:00 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 29 02:14:46 2008 -0700" }, "message": "qlogicpti: Convert to pure OF driver.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "05bb5e93f2ef3f14e0c5a7e9281d07e7a7e4233d", "tree": "4adafe57fdb557796448ebf69e9999c638ad0284", "parents": [ "27167e0e63a9c53477a7de1c55888bd660c3f9a6" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 27 00:20:58 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 29 02:14:45 2008 -0700" }, "message": "sun_esp: Convert to pure OF driver.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "63237eeb5ac92d618a0a6055f4b1f65c5d14682b", "tree": "3d44dea70077557a7543951580447dbb71d00b05", "parents": [ "738f2b7b813913e651f39387d007dd961755dee2" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Aug 26 23:33:42 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 29 02:13:31 2008 -0700" }, "message": "sparc: Move SBUS DMA attribute interfaces out of asm/sbus.h\n\nThis is in preparation for the subsequent asm/sbus.h removal.\n\nAlso, make these routines take a \"struct device\" or no\narguments, as appropriate.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "738f2b7b813913e651f39387d007dd961755dee2", "tree": "022ca4d144cba51495e6f26a8f55d3046d16c2e3", "parents": [ "944c67dff7a88f0a775e5b604937f9e30d2de555" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 27 18:09:11 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 29 02:13:15 2008 -0700" }, "message": "sparc: Convert all SBUS drivers to dma_*() interfaces.\n\nAnd all the SBUS dma interfaces are deleted.\n\nA private implementation remains inside of the 32-bit sparc port which\nexists only for the sake of the implementation of dma_*().\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7a715f46012f3552294154978aed59cba9804928", "tree": "9e7079ae4ad370b63ac6c8a4face573d6cf60533", "parents": [ "5778002874de0fb7e3d8c4a0a4afb6b1a6297069" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 27 18:37:58 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 29 02:13:12 2008 -0700" }, "message": "sparc: Make SBUS DMA interfaces take struct device.\n\nThis is the first step in converting all the SBUS drivers\nover to generic dma_*().\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "334ae614772b1147435dce9be3911f9040dff0d9", "tree": "a443e687646ab25744b20e43963f728870122e97", "parents": [ "7f06a3b2c162573c924f425053227a52b4bd7cb1" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 27 17:01:57 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 29 02:13:10 2008 -0700" }, "message": "sparc: Kill SBUS DVMA layer.\n\nThis thing was completely pointless.\n\nJust find the OF device in the parent of drivers that want to program\nthis device, and map the DMA regs inside such drivers too.\n\nThis also moves the dummy claim_dma_lock() and release_dma_lock()\nimplementation to floppy_32.h, which makes it handle this issue\njust like floppy_64.h does.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "14e507b852e7dcea142b98757181bfa785cb4c05", "tree": "ef8cdb387c26d9ffc23354653b072818e884d9f8", "parents": [ "abf5439370491dd6fbb4fe1a7939680d2a9bc9d4" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Sat Jul 26 18:03:24 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Aug 27 09:50:19 2008 +0200" }, "message": "sg: restore command permission for TYPE_SCANNER\n\nsg allowed any command for TYPE_SCANNER. The cmd_filter patchset\ndoesn\u0027t. We can\u0027t change sg\u0027s permission since it might break the\nexisting software.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "abf5439370491dd6fbb4fe1a7939680d2a9bc9d4", "tree": "aa3630557fe4a4bc6313617f5770af30eec68515", "parents": [ "1941246dd98089dd637f44d3bd4f6cc1c61aa9e4" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Sat Aug 16 14:10:05 2008 +0900" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Aug 27 09:50:19 2008 +0200" }, "message": "block: move cmdfilter from gendisk to request_queue\n\ncmd_filter works only for the block layer SG_IO with SCSI block\ndevices. It breaks scsi/sg.c, bsg, and the block layer SG_IO with SCSI\ncharacter devices (such as st). We hit a kernel crash with them.\n\nThe problem is that cmd_filter code accesses to gendisk (having struct\nblk_scsi_cmd_filter) via inode-\u003ei_bdev-\u003ebd_disk. It works for only\nSCSI block device files. With character device files, inode-\u003ei_bdev\nleads you to struct cdev. inode-\u003ei_bdev-\u003ebd_disk-\u003eblk_scsi_cmd_filter\nisn\u0027t safe.\n\nSCSI ULDs don\u0027t expose gendisk; they keep it private. bsg needs to be\nindependent on any protocols. We shouldn\u0027t change ULDs to expose their\ngendisk.\n\nThis patch moves struct blk_scsi_cmd_filter from gendisk to\nrequest_queue, a common object, which eveyone can access to.\n\nThe user interface doesn\u0027t change; users can change the filters via\n/sys/block/. gendisk has a pointer to request_queue so the cmd_filter\ncode accesses to struct blk_scsi_cmd_filter.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "7a8fc9b248e77a4eab0613acf30a6811799786b3", "tree": "24b3beb8bc0633db27ffdb791f94dce95d51b1d0", "parents": [ "d3ee1b405872214609868f3cde631ac157026dd0" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Sun Aug 17 17:36:59 2008 +0300" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Aug 23 12:14:12 2008 -0700" }, "message": "removed unused #include \u003clinux/version.h\u003e\u0027s\n\nThis patch lets the files using linux/version.h match the files that\n#include it.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ad913c11928f51abb6174f165db8d8d205b22e21", "tree": "a8542c846afb4950a12f46b16c1eacfa2280971a", "parents": [ "8e2fc39ddea7fe8c6798837da282db88a09af793" ], "author": { "name": "Dominik Brodowski", "email": "linux@dominikbrodowski.net", "time": "Sat Aug 02 16:12:00 2008 +0200" }, "committer": { "name": "Dominik Brodowski", "email": "linux@dominikbrodowski.net", "time": "Sat Aug 23 01:22:52 2008 +0200" }, "message": "pcmcia: pcmcia_config_loop() improvement by passing vcc\n\nBy passing the current Vcc setting to the pcmcia_config_loop callback\nfunction, we can remove pcmcia_get_configuration_info() calls from many\ndrivers.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n" } ], "next": "8e2fc39ddea7fe8c6798837da282db88a09af793" }