)]}' { "log": [ { "commit": "9fbe604456c5ae21768f1c98379e1b81c72adcd3", "tree": "ddcd06a1d1522ab73aec5554116793d6e10cda38", "parents": [ "4411805b13d4b8c31870b276c2730d585b062db7" ], "author": { "name": "Marc Kleine-Budde", "email": "mkl@pengutronix.de", "time": "Mon Jul 28 21:26:01 2008 +0200" }, "committer": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Tue Sep 02 10:19:30 2008 +0200" }, "message": "imx serial: fix rts handling for non imx1 based hardware\n\nThe interrupt handler for muxed interrupts (imx2/imx3) was calling\nthe rts handling subroutine if the RTSS bit was set.\n(Which indicates the status of the RTS line), leading to an\ninterrupt flood on RTS bit low.\n\nThis patch fixes the problem by looking at the RTSD bit instead,\nindicating a change in the RTS line.\n\nSigned-off-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "4411805b13d4b8c31870b276c2730d585b062db7", "tree": "b6989cdb99ae18042926478c1bb60bced93858a5", "parents": [ "c45e7d7be891fe94e13d0e7aeee3e0e4ee7118f4" ], "author": { "name": "Marc Kleine-Budde", "email": "mkl@pengutronix.de", "time": "Mon Jul 28 12:10:34 2008 +0200" }, "committer": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Tue Sep 02 10:19:29 2008 +0200" }, "message": "imx serial: set RXD mux bit on i.MX27 and i.MX31\n\nRX in i.MX27 and i.MX31 UART lines does not work unless the\n\"RXD Muxed Input Select\" bit is set on i.MX27 and i.MX31 processors.\n\nThis patch sets the missing RXD mux bit in the UCR3 register.\n\nSigned-off-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "c45e7d7be891fe94e13d0e7aeee3e0e4ee7118f4", "tree": "b39151f5bb097dc419598569c2ffc93905784714", "parents": [ "a9b0623357d2faa49a0f862154ba36c42c4bad2b" ], "author": { "name": "Darius Augulis", "email": "augulis.darius@gmail.com", "time": "Tue Sep 02 10:19:29 2008 +0200" }, "committer": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Tue Sep 02 10:19:29 2008 +0200" }, "message": "i.MX serial: fix init failure\n\nAdds extra \"out\" label to probe function after calling .init form platform data.\nBecause .init can return error number caused by gpio request fail.\n\nSigned-off-by: Darius Augulis \u003caugulis.darius@gmail.com\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n\n" }, { "commit": "a09e64fbc0094e3073dbb09c3b4bfe4ab669244b", "tree": "69689f467179891b498bd7423fcf61925173db31", "parents": [ "a1b81a84fff05dbfef45b7012c26e1fee9973e5d" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Tue Aug 05 16:14:15 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Aug 07 09:55:48 2008 +0100" }, "message": "[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach\n\nThis just leaves include/asm-arm/plat-* to deal with.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "be509729356b7433f73df2b9a966674a437fbbc1", "tree": "5a3e90513c106f9dcf08405e4ebd3599fd14413c", "parents": [ "0f8469a54f7bd65f2c740a5480c56260dc8a7ae0" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Mon Aug 04 10:41:28 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Aug 07 09:40:08 2008 +0100" }, "message": "[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead\n\nRemove includes of asm/hardware.h in addition to asm/arch/hardware.h.\nThen, since asm/hardware.h only exists to include asm/arch/hardware.h,\nupdate everything to directly include asm/arch/hardware.h and remove\nasm/hardware.h.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "a88487c79bfefb715030c5baa68fbedc1b8732e8", "tree": "1bf54afe3ec0a8aef77fc0e4ccc2c922a918ad98", "parents": [ "b1ca7e7a0b35874b2a9cae60f8f5b78df575faa7" ], "author": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Wed Jul 16 21:54:42 2008 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Jul 20 17:12:36 2008 -0700" }, "message": "Fix compile errors in SGI console drivers (linux-next tree)\n\nThe below is the patch to replace blindly all possible places,\nincluding Jack\u0027s fixes.\n\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\n(Reviewed and checked rather than blindly added)\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "604cbadce2292d979749e2f5c6c3f75ee10f4c9e", "tree": "33eb35487bb466fc945401099c3a8324ebbe8b66", "parents": [ "fc80a5e3d0480d416e4f53b0680aaf525b5076d8" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Sat Jul 05 10:02:58 2008 +0200" }, "committer": { "name": "Robert Schwebel", "email": "r.schwebel@pengutronix.de", "time": "Sat Jul 05 10:02:58 2008 +0200" }, "message": "MX2 add support for mx2 in i.MX serial driver\n\nadd support for mx2 in i.MX serial driver\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n\n" }, { "commit": "e3d13ff4b9d3b05d7a969153e2c049548e25deea", "tree": "34210b2efa3d3c614f1a13797fb133e05d391045", "parents": [ "df1bf4bdb2a3a26d4bde8ae1aefc16385dd4898f" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Sat Jul 05 10:02:48 2008 +0200" }, "committer": { "name": "Robert Schwebel", "email": "r.schwebel@pengutronix.de", "time": "Sat Jul 05 10:02:48 2008 +0200" }, "message": "mxc: add MX3 support for i.MX internal UART driver\n\nThis patch adds MX3 support for the i.MX internal uart driver.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n\n" }, { "commit": "38a41fdf94c449c165213e4665c3f8a0d30f8aba", "tree": "cde7f6c0da8c9877736a6b66f245e163fa21c2f7", "parents": [ "dbff4e9ea2e83fda89143389bfb229cb29425a32" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Sat Jul 05 10:02:46 2008 +0200" }, "committer": { "name": "Robert Schwebel", "email": "r.schwebel@pengutronix.de", "time": "Sat Jul 05 10:02:46 2008 +0200" }, "message": "IMX: introduce clock API\n\nThis patch introduces the clock API for i.MX and converts all\nin-Kernel drivers to use it.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n\n" }, { "commit": "dbff4e9ea2e83fda89143389bfb229cb29425a32", "tree": "eb3015b70fa09bd20a294afbc08d486185c691d8", "parents": [ "2582d8c1655f2eda42d5358a242b256fd6e88571" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Sat Jul 05 10:02:45 2008 +0200" }, "committer": { "name": "Robert Schwebel", "email": "r.schwebel@pengutronix.de", "time": "Sat Jul 05 10:02:45 2008 +0200" }, "message": "IMX UART: remove statically initialized tables\n\nThis patch removes the statically initialized tables from the i.MX serial\ndriver and makes the driver fully dependent on the information provided by\nthe platform_device.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n\n" }, { "commit": "2582d8c1655f2eda42d5358a242b256fd6e88571", "tree": "4752d862dc8aa94d0a59f084106538850e09d5de", "parents": [ "036bb15ec94216e28cb1550af0fdcdfb90c549df" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Sat Jul 05 10:02:45 2008 +0200" }, "committer": { "name": "Robert Schwebel", "email": "r.schwebel@pengutronix.de", "time": "Sat Jul 05 10:02:45 2008 +0200" }, "message": "IMX UART: Add board specific init/exit functions\n\nAdd platform specific init functions. Also rename the struct\nplatform_device dev into pdev.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n\n" }, { "commit": "036bb15ec94216e28cb1550af0fdcdfb90c549df", "tree": "320dd6c0fdc59813f70090190020599304baff96", "parents": [ "63dd10846d4917534e9ec7bddf43be786effe8b8" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Sat Jul 05 10:02:44 2008 +0200" }, "committer": { "name": "Robert Schwebel", "email": "r.schwebel@pengutronix.de", "time": "Sat Jul 05 10:02:44 2008 +0200" }, "message": "IMX UART: do not assume 16MHz reference frequency\n\nWe assumed a 16MHz reference frequency for the UART. While this\nis true for i.MX1 most of the time it is not true for MX27/MX31.\nAlso, add handling for the ONEMS register which is present on\nnewer versions of the chip and pass a sane minimum baudrate to\nuart_get_baud_rate().\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n\n" }, { "commit": "cf816ecb533ab96b883dfdc0db174598b5b5c4d2", "tree": "1b7705db288ae2917105e624b01fdf81e0882bf1", "parents": [ "adf6d34e460387ee3e8f1e1875d52bff51212c7d", "15f7d677ccff6f0f5de8a1ee43a792567e9f9de9" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sat Apr 19 17:17:34 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat Apr 19 17:17:34 2008 +0100" }, "message": "Merge branch \u0027merge-fixes\u0027 into devel\n" }, { "commit": "3a8daaa49fb71d90e45d1e86d7f9f9e298bda05c", "tree": "1c41bfb54e9d5afaf85b378033d8ed4e771bbbe4", "parents": [ "3d454446e2b83b4e1e2997b2c6e689c85ab61868" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Thu Apr 17 08:48:37 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Apr 17 16:22:22 2008 +0100" }, "message": "[ARM] 4999/1: \u003cIMX UART\u003e: fix membase\n\nThe membase field in struct uart_port should be the the physical\naddress. This patch fixes it.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "3d454446e2b83b4e1e2997b2c6e689c85ab61868", "tree": "c56034720494798fd181ab8670259062172ff350", "parents": [ "789d52589a0849004ced991549a61dd110dfeb10" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Thu Apr 17 08:47:32 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Apr 17 16:22:21 2008 +0100" }, "message": "[ARM] 4998/1: \u003cIMX UART\u003e: do not use hardcoded io space size\n\nDo not use hardcoded io space size. Instead use the information provided\nby the resource.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "789d52589a0849004ced991549a61dd110dfeb10", "tree": "016d934319462e2301f7a8c8896f4b787dbaf3ad", "parents": [ "0d3c3938ff9855d8996db4083efd62e86b8987eb" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Thu Apr 17 08:44:47 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Apr 17 16:18:22 2008 +0100" }, "message": "[ARM] 4996/1: \u003cIMX UART\u003e: do not enable tx empty interrupt on startup\n\nWe are not interested in tranceiver empty interrupts until we actually\nsent a buffer.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "0d3c3938ff9855d8996db4083efd62e86b8987eb", "tree": "508644741e30c68866fc414b64bb0e0eca51af03", "parents": [ "864eeed051b527c8081e2f85b51ba24823acaf71" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Thu Apr 17 08:43:14 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Apr 17 16:18:20 2008 +0100" }, "message": "[ARM] 4995/1: \u003cIMX UART\u003e: Do not use URXD_CHARRDY for polling\n\nDo not use the URXD_CHARRDY bit for polling for new characters. This works\non i.MX1, but on MX31 the datasheet states that this bit should not be\nused for polling. On MX27 it is even worse, here we get a bus error when\nwe access the read FIFO when no character is present.\nInstead, use USR2_RDR (receive data ready) bit.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "864eeed051b527c8081e2f85b51ba24823acaf71", "tree": "7fa05275be02d98f5956b3030cdbf3c2a5f18228", "parents": [ "8c9915bf310eeb1fe5a9a614cda6ee57d712460b" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Thu Apr 17 08:39:22 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Apr 17 16:18:19 2008 +0100" }, "message": "[ARM] 4994/1: \u003cIMX UART\u003e: Move error handling into execution path\n\nMove the error handling code for erroneous receive characters into\nexecution path. This makes the code more readable and the compiler\nshould know how to optimize this, right?\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "8c9915bf310eeb1fe5a9a614cda6ee57d712460b", "tree": "9eb7bae6d29ecd124a1106af8d2bda2ffcadd60c", "parents": [ "d2db9aaa4a5b9f2a1d54080c13f5ff4fc6d0ae1b" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Thu Apr 17 08:37:29 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Apr 17 16:18:18 2008 +0100" }, "message": "[ARM] 4993/1: \u003cIMX UART\u003e: Trivial: Remove unused defines\n\nThis patch removes the unused defines NR_PORTS and IMX_ISR_PASS_LIMIT in\nthe imx serial driver.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "e169c139642fb4c682ec12a409725508dbefa520", "tree": "71d1911b9973bc68c69597784c9d542c03f935b8", "parents": [ "12c2c019eb9b0b586a061b336766d11cca449499" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Tue Apr 15 14:34:35 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 15 19:35:40 2008 -0700" }, "message": "serial: fix platform driver hotplug/coldplug\n\nSince 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is\nprefixed with \"platform:\". Add MODULE_ALIAS() to the hotpluggable serial\nplatform drivers, to re-enable auto loading.\n\nNOTE that Kconfig for some of these drivers doesn\u0027t allow modular builds, and\nthus doesn\u0027t match the driver source\u0027s unload support. Presumably their\nunload code is buggy and/or weakly tested...\n\n[dbrownell@users.sourceforge.net: more drivers, registration fixes]\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nAcked-by: Peter Korsgaard \u003cjacmet@sunsite.dk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "15aafa2f9d8399b22e418c53a87dfc0c43f4030f", "tree": "7861111fb87f4f69e496901d8883d0b796521255", "parents": [ "bcfbf84d4067674b0740a39605f8057622ad5230" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Feb 06 01:36:20 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Feb 06 10:41:01 2008 -0800" }, "message": "Remove pointless casts from void pointers\n\nMostly in and around irq handlers.\n\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: \"Luck Tony\" \u003ctony.luck@intel.com\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nCc: Karsten Keil \u003ckkeil@suse.de\u003e\nAcked-by: \"John W. Linville\" \u003clinville@tuxdriver.com\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nCc: \"Antonino A. Daplas\" \u003cadaplas@pol.net\u003e\nAcked-by: Josh Boyer \u003cjwboyer@linux.vnet.ibm.com\u003e\nAcked-by: Holger Schurig \u003chs4233@mail.mn-solutions.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4b300c362d690c8e0788f69ed91c22a0a76f7ce2", "tree": "584c1418fe18e8093b6b2c7c24c3d87779871767", "parents": [ "9a79b2274186fade17134929d4f85b70d59a3840" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Tue Jul 17 13:35:46 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri Jul 20 09:55:14 2007 +0100" }, "message": "[ARM] 4481/1: Fix a bug when i.MX is compiled as a module\n\nFix the unregistration order in the i.MX serial driver\n\nSigned-off-by: Sreekrishnan Venkateswaran \u003ckrishhna@gmail.com\u003e\nAcked-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "ff4bfb2163e8914332267be3758eb28239460316", "tree": "64ea831cd2aa0845312b0d42f44ed2c4957645a9", "parents": [ "235b185ce47ce64793362bd3ae4bcd8afc6b57b8" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Thu Apr 26 08:26:13 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 03 20:24:21 2007 +0100" }, "message": "[ARM] 4328/1: Move i.MX UART regs to driver\n\nThis patch moves the i.MX UART register descriptions from\ninclude/asm-arm/arch-imx/imx-regs.h to the serial driver itself.\nThis helps using the driver on other architectures like mx31\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "d7ea10d9cbddd49bab282adef805203a36e43101", "tree": "749ee4224b139d9898dad6a3e1cd5406c00c3ea5", "parents": [ "8c0b254b7efaa7941b3acfe790dd16597b0964b3" ], "author": { "name": "Pavel Pisa", "email": "ppisa4lists@pikron.com", "time": "Mon Feb 05 16:10:20 2007 -0800" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sun Feb 11 16:46:23 2007 +0000" }, "message": "[ARM] i.MX serial: fix IRQ allocation\n\nIf RTS interrupt is caused by RTS senzing logic inside i.MX UART module the\nIRQ type cannot be set.\n\nIt applies only for interrupts going through GPIO layer. The problem has\nbeen noticed by Konstantin Kletschke some time ago.\n\n No IRQF_TRIGGER set_type function for IRQ 26 (MPU)\n\nI would not change type to fixed 0, because it could be possible to use\ndifferent GPIO MX1 pin for RTS in the theory. On the other hand it is only\nfor documentation purposes now, because RTS read code would have to be\nadjusted in such case.\n\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "8c0b254b7efaa7941b3acfe790dd16597b0964b3", "tree": "8e207bb396d9a1b04bda617139bf030c6da45edf", "parents": [ "ae0a846e411dc0b568e8ccda584896310ee5f369" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Mon Feb 05 16:10:16 2007 -0800" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sun Feb 11 16:46:19 2007 +0000" }, "message": "[ARM] i.MX serial: fix tx buffer overflows\n\nFix occasional tx buffer overflows in the i.MX serial driver which came\nfrom the fact that space in the buffer was checked after sending the first\nbyte. Also, fifosize is 32 bytes, not 8.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\nAcked-by: Pavel Pisa \u003cpisa@cmp.felk.cvut.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "606d099cdd1080bbb50ea50dc52d98252f8f10a1", "tree": "80d17450a5fb78effce3f4312f672c058658e004", "parents": [ "edc6afc5496875a640bef0913604be7550c1795d" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Fri Dec 08 02:38:45 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.osdl.org", "time": "Fri Dec 08 08:28:57 2006 -0800" }, "message": "[PATCH] tty: switch to ktermios\n\nThis is the grungy swap all the occurrences in the right places patch that\ngoes with the updates. At this point we have the same functionality as\nbefore (except that sgttyb() returns speeds not zero) and are ready to\nbegin turning new stuff on providing nobody reports lots of bugs\n\nIf you are a tty driver author converting an out of tree driver the only\nimpact should be termios-\u003ektermios name changes for the speed/property\nsetting functions from your upper layers.\n\nIf you are implementing your own TCGETS function before then your driver\nwas broken already and its about to get a whole lot more painful for you so\nplease fix it 8)\n\nAlso fill in c_ispeed/ospeed on init for most devices, although the current\ncode will do this for you anyway but I\u0027d like eventually to lose that extra\nparanoia\n\n[akpm@osdl.org: bluetooth fix]\n[mp3@de.ibm.com: sclp fix]\n[mp3@de.ibm.com: warning fix for tty3270]\n[hugh@veritas.com: fix tty_ioctl powerpc build]\n[jdike@addtoit.com: uml: fix -\u003eset_termios declaration]\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Martin Peschke \u003cmp3@de.ibm.com\u003e\nAcked-by: Peter Oberparleiter \u003coberpar@de.ibm.com\u003e\nCc: Cornelia Huck \u003ccornelia.huck@de.ibm.com\u003e\nSigned-off-by: Hugh Dickins \u003chugh@veritas.com\u003e\nSigned-off-by: Jeff Dike \u003cjdike@addtoit.com\u003e\nCc: Paolo \u0027Blaisorblade\u0027 Giarrusso \u003cblaisorblade@yahoo.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "7d12e780e003f93433d49ce78cfedf4b4c52adc5", "tree": "6748550400445c11a306b132009f3001e3525df8", "parents": [ "da482792a6d1a3fbaaa25fae867b343fb4db3246" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Thu Oct 05 14:55:46 2006 +0100" }, "committer": { "name": "David Howells", "email": "dhowells@warthog.cambridge.redhat.com", "time": "Thu Oct 05 15:10:12 2006 +0100" }, "message": "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers\n\nMaintain a per-CPU global \"struct pt_regs *\" variable which can be used instead\nof passing regs around manually through all ~1800 interrupt handlers in the\nLinux kernel.\n\nThe regs pointer is used in few places, but it potentially costs both stack\nspace and code to pass it around. On the FRV arch, removing the regs parameter\nfrom all the genirq function results in a 20% speed up of the IRQ exit path\n(ie: from leaving timer_interrupt() to leaving do_IRQ()).\n\nWhere appropriate, an arch may override the generic storage facility and do\nsomething different with the variable. On FRV, for instance, the address is\nmaintained in GR28 at all times inside the kernel as part of general exception\nhandling.\n\nHaving looked over the code, it appears that the parameter may be handed down\nthrough up to twenty or so layers of functions. Consider a USB character\ndevice attached to a USB hub, attached to a USB controller that posts its\ninterrupts through a cascaded auxiliary interrupt controller. A character\ndevice driver may want to pass regs to the sysrq handler through the input\nlayer which adds another few layers of parameter passing.\n\nI\u0027ve build this code with allyesconfig for x86_64 and i386. I\u0027ve runtested the\nmain part of the code on FRV and i386, though I can\u0027t test most of the drivers.\nI\u0027ve also done partial conversion for powerpc and MIPS - these at least compile\nwith minimal configurations.\n\nThis will affect all archs. Mostly the changes should be relatively easy.\nTake do_IRQ(), store the regs pointer at the beginning, saving the old one:\n\n\tstruct pt_regs *old_regs \u003d set_irq_regs(regs);\n\nAnd put the old one back at the end:\n\n\tset_irq_regs(old_regs);\n\nDon\u0027t pass regs through to generic_handle_irq() or __do_IRQ().\n\nIn timer_interrupt(), this sort of change will be necessary:\n\n\t-\tupdate_process_times(user_mode(regs));\n\t-\tprofile_tick(CPU_PROFILING, regs);\n\t+\tupdate_process_times(user_mode(get_irq_regs()));\n\t+\tprofile_tick(CPU_PROFILING);\n\nI\u0027d like to move update_process_times()\u0027s use of get_irq_regs() into itself,\nexcept that i386, alone of the archs, uses something other than user_mode().\n\nSome notes on the interrupt handling in the drivers:\n\n (*) input_dev() is now gone entirely. The regs pointer is no longer stored in\n the input_dev struct.\n\n (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does\n something different depending on whether it\u0027s been supplied with a regs\n pointer or not.\n\n (*) Various IRQ handler function pointers have been moved to type\n irq_handler_t.\n\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\n(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)\n" }, { "commit": "40663cc7f1c1ccf515d8af9470925a0cb2f59b5d", "tree": "569e10d6a6ea750970a557651bb129b7ace961d1", "parents": [ "1d6f359a2e06296418481239f8054a878f36e819" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Sat Jul 01 19:29:43 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Jul 02 13:58:53 2006 -0700" }, "message": "[PATCH] irq-flags: serial: Use the new IRQF_ constants\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7", "tree": "6d98881fe91fd9583c109208d5c27131b93fa248", "parents": [ "e02169b682bc448ccdc819dc8639ed34a23cedd8" ], "author": { "name": "Jörn Engel", "email": "joern@wohnheim.fh-wedel.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "aa4148cfc7b3b93eeaf755a7d14f10afaffe9a96", "tree": "7f1c84f3cf7c0c79ccdb94a62a3543ee19e5edc2", "parents": [ "bdaf8529385d5126ef791e8f1914afff8cd59bcf" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jun 20 21:15:16 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jun 26 12:25:05 2006 -0700" }, "message": "[PATCH] devfs: Remove devfs support from the serial subsystem\n\nAlso fixes all serial drivers.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "5b802344357338a4d645beac8ca97470bcbe3542", "tree": "f3f8df6cb9bec5ddb6dc947ea99eb9454232066b", "parents": [ "b2556da55f78a9dbe92830b1d1c0b612edfea9fd" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Thu May 04 14:07:42 2006 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 04 14:07:42 2006 +0100" }, "message": "[ARM] 3490/1: i.MX: move uart resources to board files\n\nPatch from Sascha Hauer\n\nThis patch moves the i.MX uart resources and the gpio pin setup to the\nboard files. This allows the boards to decide how many internal uarts\nare connected to the outside world and whether they use rts/cts or\nnot.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "d358788f3f30113e49882187d794832905e42592", "tree": "8c796ee4bf719dad4d3947c03cef2f3fd6cb5940", "parents": [ "7705a8792b0fc82fd7d4dd923724606bbfd9fb20" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Mon Mar 20 20:00:09 2006 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Mon Mar 20 20:00:09 2006 +0000" }, "message": "[SERIAL] kernel console should send CRLF not LFCR\n\nGlen Turner reported that writing LFCR rather than the more\ntraditional CRLF causes issues with some terminals.\n\nSince this aflicts many serial drivers, extract the common code\nto a library function (uart_console_write) and arrange for each\ndriver to supply a \"putchar\" function.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "9b4a1617772d6d5ab5eeda0cd95302fae119e359", "tree": "5104ea63a01c995036947998016e3205cff3a61d", "parents": [ "53ea68ecea11bcbb3451c2758ce181bd97b569a9" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sun Feb 05 10:48:10 2006 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sun Feb 05 10:48:10 2006 +0000" }, "message": "[SERIAL] uart_port iotype member should use UPIO_*\n\nConvert usage of SERIAL_IO_* to UPIO_*.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "d195ea4b1456192abe780fd773778cbe9f6d77ea", "tree": "25ea330c4fced145290f6f5cfb1b06a1cf8402c0", "parents": [ "bb4bc81a234c66e8d8a4475110fa2d7988a34671", "df7559d3440ff759ff6e1371ff722bb3a73a3639" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Jan 31 11:31:54 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Jan 31 11:31:54 2006 -0800" }, "message": "Merge master.kernel.org:/home/rmk/linux-2.6-serial\n" }, { "commit": "ce8337cb7dc327c3ae3684ba0ee5d7cbde1fd296", "tree": "196d5859a9c52eefd9f479ddda71a5b43387fd64", "parents": [ "f91a3715db2bb44fcf08cec642e68f919b70f7f4" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sat Jan 21 19:28:15 2006 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat Jan 21 19:28:15 2006 +0000" }, "message": "[SERIAL] Don\u0027t use ASYNC_ constants with the uart_port structure\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "f43aaba191bfbe20a1f55ec05f43813ce381cd53", "tree": "2b4ad27e7dcae3df4e8d602b26fb4952fa902ded", "parents": [ "0f36b018b2e314d45af86449f1a97facb1fbe300" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Thu Jan 19 12:26:57 2006 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Jan 19 12:26:57 2006 +0000" }, "message": "[ARM] Convert request_irq+set_irq_type to request_irq with SA_TRIGGER\n\nThere\u0027s no need to have request_irq followed by set_irq_type.\nJust use request_irq with the appropriate SA_TRIGGER flags.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "3261e362f603cf2649f90e9ad2d1a1f98f69291a", "tree": "73b2469a0af03022217c25eb0469fec8b6d1995c", "parents": [ "dd29c7277126db6884df42d41f2fbe2ebc10041e" ], "author": { "name": "Matt Reimer", "email": "mreimer@vpop.net", "time": "Fri Jan 13 20:51:44 2006 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri Jan 13 20:51:44 2006 +0000" }, "message": "[ARM] 3258/1: IMX serial: fix parity\n\nPatch from Matt Reimer\n\nIMX serial parity generation doesn\u0027t work because of a simple logic error. This patch fixes it and now Bluetooth works on R1000.\n\nSigned-off-by: Matt Reimer \u003cmreimer@vpop.net\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "33f0f88f1c51ae5c2d593d26960c760ea154c2e2", "tree": "f53a38cf49406863f079d74d0e8f91b276f7c1a9", "parents": [ "6ed80991a2dce4afc113be35089c564d62fa1f11" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Mon Jan 09 20:54:13 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Jan 10 08:01:59 2006 -0800" }, "message": "[PATCH] TTY layer buffering revamp\n\nThe API and code have been through various bits of initial review by\nserial driver people but they definitely need to live somewhere for a\nwhile so the unconverted drivers can get knocked into shape, existing\ndrivers that have been updated can be better tuned and bugs whacked out.\n\nThis replaces the tty flip buffers with kmalloc objects in rings. In the\nnormal situation for an IRQ driven serial port at typical speeds the\nbehaviour is pretty much the same, two buffers end up allocated and the\nkernel cycles between them as before.\n\nWhen there are delays or at high speed we now behave far better as the\nbuffer pool can grow a bit rather than lose characters. This also means\nthat we can operate at higher speeds reliably.\n\nFor drivers that receive characters in blocks (DMA based, USB and\nespecially virtualisation) the layer allows a lot of driver specific\ncode that works around the tty layer with private secondary queues to be\nremoved. The IBM folks need this sort of layer, the smart serial port\npeople do, the virtualisers do (because a virtualised tty typically\noperates at infinite speed rather than emulating 9600 baud).\n\nFinally many drivers had invalid and unsafe attempts to avoid buffer\noverflows by directly invoking tty methods extracted out of the innards\nof work queue structs. These are no longer needed and all go away. That\nfixes various random hangs with serial ports on overflow.\n\nThe other change in here is to optimise the receive_room path that is\nused by some callers. It turns out that only one ldisc uses receive room\nexcept asa constant and it updates it far far less than the value is\nread. We thus make it a variable not a function call.\n\nI expect the code to contain bugs due to the size alone but I\u0027ll be\nwatching and squashing them and feeding out new patches as it goes.\n\nBecause the buffers now dynamically expand you should only run out of\nbuffering when the kernel runs out of memory for real. That means a lot of\nthe horrible hacks high performance drivers used to do just aren\u0027t needed any\nmore.\n\nDescription:\n\ntty_insert_flip_char is an old API and continues to work as before, as does\ntty_flip_buffer_push() [this is why many drivers dont need modification]. It\ndoes now also return the number of chars inserted\n\nThere are also\n\ntty_buffer_request_room(tty, len)\n\nwhich asks for a buffer block of the length requested and returns the space\nfound. This improves efficiency with hardware that knows how much to\ntransfer.\n\nand tty_insert_flip_string_flags(tty, str, flags, len)\n\nto insert a string of characters and flags\n\nFor a smart interface the usual code is\n\n len \u003d tty_request_buffer_room(tty, amount_hardware_says);\n tty_insert_flip_string(tty, buffer_from_card, len);\n\nMore description!\n\nAt the moment tty buffers are attached directly to the tty. This is causing a\nlot of the problems related to tty layer locking, also problems at high speed\nand also with bursty data (such as occurs in virtualised environments)\n\nI\u0027m working on ripping out the flip buffers and replacing them with a pool of\ndynamically allocated buffers. This allows both for old style \"byte I/O\"\ndevices and also helps virtualisation and smart devices where large blocks of\ndata suddenely materialise and need storing.\n\nSo far so good. Lots of drivers reference tty-\u003eflip.*. Several of them also\ncall directly and unsafely into function pointers it provides. This will all\nbreak. Most drivers can use tty_insert_flip_char which can be kept as an API\nbut others need more.\n\nAt the moment I\u0027ve added the following interfaces, if people think more will\nbe needed now is a good time to say\n\n int tty_buffer_request_room(tty, size)\n\nTry and ensure at least size bytes are available, returns actual room (may be\nzero). At the moment it just uses the flipbuf space but that will change.\nRepeated calls without characters being added are not cumulative. (ie if you\ncall it with 1, 1, 1, and then 4 you\u0027ll have four characters of space. The\nother functions will also try and grow buffers in future but this will be a\nmore efficient way when you know block sizes.\n\n int tty_insert_flip_char(tty, ch, flag)\n\nAs before insert a character if there is room. Now returns 1 for success, 0\nfor failure.\n\n int tty_insert_flip_string(tty, str, len)\n\nInsert a block of non error characters. Returns the number inserted.\n\n int tty_prepare_flip_string(tty, strptr, len)\n\nAdjust the buffer to allow len characters to be added. Returns a buffer\npointer in strptr and the length available. This allows for hardware that\nneeds to use functions like insl or mencpy_fromio.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Paul Fulghum \u003cpaulkf@microgate.com\u003e\nSigned-off-by: Hirokazu Takata \u003ctakata@linux-m32r.org\u003e\nSigned-off-by: Serge Hallyn \u003cserue@us.ibm.com\u003e\nSigned-off-by: Jeff Dike \u003cjdike@addtoit.com\u003e\nSigned-off-by: John Hawkes \u003chawkes@sgi.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "c889b89619339636240227abb9ee5c9ec1167a1a", "tree": "b5c9dcda9140bdd2f67e233abd5174c5289b9dab", "parents": [ "db93a82fa9d8b4d6e31c227922eaae829253bb88" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Mon Nov 21 17:05:21 2005 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Mon Nov 21 17:05:21 2005 +0000" }, "message": "[SERIAL] imx: Fix missed platform_driver_unregister\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "3ae5eaec1d2d9c0cf53745352e7d4b152810ba24", "tree": "d8825be54cefb6ad6707478d719c8e30605bee7b", "parents": [ "00d3dcdd96646be6059cc21f2efa94c4edc1eda5" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Wed Nov 09 22:32:44 2005 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Nov 09 22:32:44 2005 +0000" }, "message": "[DRIVER MODEL] Convert platform drivers to use struct platform_driver\n\nThis allows us to eliminate the casts in the drivers, and eventually\nremove the use of the device_driver function pointer methods for\nplatform device drivers.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "8576762ff5d109b841fcf4e7d3883e0cf794f3cf", "tree": "ad8fc56461bc29531a2b42d71c17d1db3c909263", "parents": [ "e32e28edc3d894201e15b19df627af66023aa91f" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sun Oct 30 16:33:11 2005 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sun Oct 30 16:33:11 2005 +0000" }, "message": "[DRIVER MODEL] Add missing driver_unregister to IMX serial driver\n\nFix the IMX serial driver to unregister its driver structure\nwhen it is unloaded.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d052d1beff706920e82c5d55006b08e256b5df09", "tree": "dac91b70361b405ab8e15207f514a2f3e991e93d", "parents": [ "8a212ab6b8a4ccc6f3c3d1beba5f92655c576404" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sat Oct 29 19:07:23 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat Oct 29 19:07:23 2005 +0100" }, "message": "Create platform_device.h to contain all the platform device details.\nConvert everyone who uses platform_bus_type to include\nlinux/platform_device.h.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "9480e307cd88ef09ec9294c7d97ebec18e6d2221", "tree": "967e26d3a23c24dd52b114d672312c207714308c", "parents": [ "a3a3395e487abc4c1371fe319a8ecbb3913a70a4" ], "author": { "name": "Russell King", "email": "rmk@arm.linux.org.uk", "time": "Fri Oct 28 09:52:56 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Oct 28 09:52:56 2005 -0700" }, "message": "[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks\n\nIn PM v1, all devices were called at SUSPEND_DISABLE level. Then\nall devices were called at SUSPEND_SAVE_STATE level, and finally\nSUSPEND_POWER_DOWN level. However, with PM v2, to maintain\ncompatibility for platform devices, I arranged for the PM v2\nsuspend/resume callbacks to call the old PM v1 suspend/resume\ncallbacks three times with each level in order so that existing\ndrivers continued to work.\n\nSince this is obsolete infrastructure which is no longer necessary,\nwe can remove it. Here\u0027s an (untested) patch to do exactly that.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "ceca629e0b4858d6b8bff260dab2e947d31aca56", "tree": "56b9a6a6dbf1674c7111dfaa255f294c895dd4e2", "parents": [ "9f693d7b149a74bac301ee47136359294cffed25" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Wed Oct 12 19:58:08 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Oct 12 19:58:08 2005 +0100" }, "message": "[ARM] 2971/1: i.MX uart handle rts irq\n\nPatch from Sascha Hauer\n\nhandle rts interrupt\n\nSigned-off-by: Giancarlo Formicuccia \u003cgiancarlo.formicuccia@gmail.com\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "86371d071bc38a181984b01d323b6172a4b7bb1f", "tree": "bc0e483864c97c0b38721ba4725028aa4d77116d", "parents": [ "ce80cc14810fbd78fa70c15c7e16a0b26d462fc6" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Mon Oct 10 10:17:42 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Mon Oct 10 10:17:42 2005 +0100" }, "message": "[ARM] 2957/1: imx UART Error handling\n\nPatch from Sascha Hauer\n\nFix error path in imx_startup.\n\nSigned-off-by: Giancarlo Formicuccia \u003cgformicuccia@atinno.com\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "9f4426dde2be352aabc326539eccc726cea2d98c", "tree": "a36e6d4f5b808e74c3701572168a85e7b6403a45", "parents": [ "f0e837d9182d7903bde3ebafbd1d0d68c6d32d43" ], "author": { "name": "Vincent Sanders", "email": "vince@kyllikki.org", "time": "Sat Oct 01 22:56:34 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat Oct 01 22:56:34 2005 +0100" }, "message": "[ARM] 2944/1: GCC 4 mx1ads serial driver compile fix\n\nPatch from Vincent Sanders\n\nWhen building the mx1ads ARM platforms the serial driver fails to compile\nwith GCC 4.01 due to extern/static ambiguity.\n\nSigned-off-by: Vincent Sanders \u003cvince@arm.linux.org.uk\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "0f302dc35412dc67035efc188b9d5c40711b4222", "tree": "57cbbe8e722e6a82bfd8bb3b8227898c54615c72", "parents": [ "b129a8ccd53f74c43e4c83c8e0031a4990040830" ], "author": { "name": "Sascha Hauer", "email": "sascha@saschahauer.de", "time": "Wed Aug 31 21:48:47 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Aug 31 21:48:47 2005 +0100" }, "message": "[ARM] 2866/1: add i.MX set_mctrl / get_mctrl functions\n\nPatch from Sascha Hauer\n\nThis patch adds support for setting and getting RTS / CTS via\nset_mtctrl / get_mctrl functions.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "b129a8ccd53f74c43e4c83c8e0031a4990040830", "tree": "4c40afd836be87166d6d014380262f1baa19694f", "parents": [ "6b39374a27eb4be7e9d82145ae270ba02ea90dc8", "194d0710e1a7fe92dcf860ddd31fded8c3103b7a" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Wed Aug 31 10:12:14 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Aug 31 10:12:14 2005 +0100" }, "message": "[SERIAL] Clean up and fix tty transmission start/stoping\n\nThe start_tx and stop_tx methods were passed a flag to indicate\nwhether the start/stop was from the tty start/stop callbacks, and\nsome drivers used this flag to decide whether to ask the UART to\nimmediately stop transmission (where the UART supports such a\nfeature.)\n\nThere are other cases when we wish this to occur - when CTS is\nlowered, or if we change from soft to hard flow control and CTS\nis inactive. In these cases, this flag was false, and we would\nallow the transmitter to drain before stopping.\n\nThere is really only one case where we want to let the transmitter\ndrain before disabling, and that\u0027s when we run out of characters\nto send.\n\nHence, re-jig the start_tx and stop_tx methods to eliminate this\nflag, and introduce new functions for the special \"disable and\nallow transmitter to drain\" case.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "587897f51fac04988de497a553215fdf41e6d5f6", "tree": "156025260e508e775b1695479e4fdf69d8454f7f", "parents": [ "c60c390620e0abb60d4ae8c43583714bda27763f" ], "author": { "name": "Sascha Hauer", "email": "sascha@de.rmk.(none)", "time": "Fri Apr 29 22:46:40 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri Apr 29 22:46:40 2005 +0100" }, "message": "[PATCH] ARM: 2654/1: i.MX UART initialization sets and honors UFCR value\n\nPatch from Sascha Hauer\n\nThis patch adds UCFR_RFDIV setting into i.MX serial driver.\nThis is required, if loader does not fully agree with Linux kernel\nabout UART setup manner. Linux only blindly expected some values until\nnow. This should enable to use even serial ports not recognized by\nboot-loader as for example third UART found in the bluethoot module.\nPatch also enables to detect original setup baudrate in more cases.\n\nSigned-off-by: Pavel Pisa\nSigned-off-by: Sascha Hauer\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "0370affeec3e751412e917aab931d8ba52680578", "tree": "da7698bc4130e252372d56b7e251453d1eccefe3", "parents": [ "a4ffad5b77f17bd8ad2a220d6eb0278bc07a5a17" ], "author": { "name": "Pavel Machek", "email": "pavel@ucw.cz", "time": "Sat Apr 16 15:25:35 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:25:35 2005 -0700" }, "message": "[PATCH] fix u32 vs. pm_message_t in drivers/\n\n-rc2-mm1 still contains few places where u32 and pm_message_t. This fixes\ndrivers/serial [should change no code].\n\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }