)]}'
{
  "log": [
    {
      "commit": "377135912806ddc87d56d64fafa685f4063c45f1",
      "tree": "77165d6a19281278d54c0b054ffacf7472bd093e",
      "parents": [
        "b76c5a0717094f0a900d9afd8e36f7ad8dbba587"
      ],
      "author": {
        "name": "Maciej W. Rozycki",
        "email": "macro@linux-mips.org",
        "time": "Wed Jul 23 21:29:48 2008 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jul 24 10:47:29 2008 -0700"
      },
      "message": "serial: Z85C30: avoid a hang at console switch-over\n\nChanges to the generic console support code that happened a while ago\nintroduced a scenario where the initial console is used in parallel with\nthe final console during a brief period when switching between the two is\nin progress.  During that time a message about the switch-over is printed.\n\nWith some combinations of chips, firmware and drivers, such as the Zilog\nZ85C30 SCC used with the DECstation, a hang may happen because the\nfirmware used for the initial console may not expect the state of the chip\nafter it has been initialised by the driver.  This is not a bug in the\nfirmware, as some registers it would have to examine are write-only.\n\nThis is a workaround for the Z85C30 which reuses the power-management\ncallback to keep the transmitter of the line associated with the console\nenabled.  It reflects the consensus reached in a discussion a while ago.\n\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nCc: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "a88487c79bfefb715030c5baa68fbedc1b8732e8",
      "tree": "1bf54afe3ec0a8aef77fc0e4ccc2c922a918ad98",
      "parents": [
        "b1ca7e7a0b35874b2a9cae60f8f5b78df575faa7"
      ],
      "author": {
        "name": "Takashi Iwai",
        "email": "tiwai@suse.de",
        "time": "Wed Jul 16 21:54:42 2008 +0100"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sun Jul 20 17:12:36 2008 -0700"
      },
      "message": "Fix compile errors in SGI console drivers (linux-next tree)\n\nThe below is the patch to replace blindly all possible places,\nincluding Jack\u0027s fixes.\n\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\n(Reviewed and checked rather than blindly added)\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "8b4a40809e5330c9da5d20107d693d92d73b31dc",
      "tree": "14de7320d32a7e72dc2cddf4833405db0f49a7ba",
      "parents": [
        "b187f180cc942e50007aa039f8e3a620ee5f3171"
      ],
      "author": {
        "name": "Maciej W. Rozycki",
        "email": "macro@linux-mips.org",
        "time": "Wed Jul 18 00:49:11 2007 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@woody.linux-foundation.org",
        "time": "Wed Jul 18 08:38:22 2007 -0700"
      },
      "message": "zs: move to the serial subsystem\n\nThis is a reimplementation of the zs driver for the serial subsystem.  Any\nresemblance to the old driver is purely coincidential.  ;-) I do hope I got\nthe handling of modem lines right -- better do not tackle me about the\nissue unless you feel too good...\n\nAny users of the old driver: please note the numbers of the serial lines\nhave now been swapped, i.e.  ttyS0 \u003c-\u003e ttyS1 and ttyS2 \u003c-\u003e ttyS3.  It has\nto do with the modem lines mentioned above; basically the port A in a given\nchip has to be initialised before the port B if you want to use the latter\nas the serial console (which is usually the case), as operations on modem\nlines of the serial line associated with the port B access both ports (see\nthe comment at the top of the driver for the details of wiring used).\nPlease update your scripts.\n\nThis is also the reason each SCC now requests an IRQ once only (as seen in\n\"/proc/interrupts\") -- the handler takes care of both ports at once as the\nline associated with the port B has to take status update interrupts from\nboth ports (and yet the line of the port A takes its own for itself too).\nThe old driver never got it right...\n\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nCc: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    }
  ]
}