)]}' { "log": [ { "commit": "870abdf67170daa9f1022e55a35c469239fcc74c", "tree": "5ca00db880d71149eea2cdaeb67ed20f5281071d", "parents": [ "76708dee382a69b2f9d0e50f413f99fefb2dc509" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sun Oct 05 18:04:24 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 06 18:14:57 2008 -0400" }, "message": "mac80211: add multi-rate retry support\n\nThis patch adjusts the rate control API to allow multi-rate retry\nif supported by the driver. The ieee80211_hw struct specifies how\nmany alternate rate selections the driver supports.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "76708dee382a69b2f9d0e50f413f99fefb2dc509", "tree": "ce1b8014520c08641423a0842d03eace38da0c4e", "parents": [ "417bd25ac4c6f76c8aafe8a584f3620f4a936b72" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sun Oct 05 18:02:48 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 06 18:14:57 2008 -0400" }, "message": "mac80211: free up 2 bytes in skb-\u003ecb\n\nFree up 2 bytes in skb-\u003ecb to be used for multi-rate retry later.\nMove iv_len and icv_len initialization into key alloc.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4b7679a561e552eeda1e3567119bef2bca99b66e", "tree": "b5f2b45c9186eb954f9329322d07e277e669b422", "parents": [ "2ff6a6d4e92270283432690adf53a7e5ab186d19" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 18 18:14:18 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 24 16:18:03 2008 -0400" }, "message": "mac80211: clean up rate control API\n\nLong awaited, hard work. This patch totally cleans up the rate control\nAPI to remove the requirement to include internal headers outside of\nnet/mac80211/.\n\nThere\u0027s one internal use in the PID algorithm left for mesh networking,\nwe\u0027ll have to figure out a way to clean that one up and decide how to\ndo the peer link evaluation, possibly independent of the rate control\nalgorithm or via new API.\n\nAdditionally, ath9k is left using the cross-inclusion hack for now, we\nwill add new API where necessary to make this work properly, but right\nnow I\u0027m not expert enough to do it. It\u0027s still off better than before.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "25d834e16294c8dfd923dae6bdb8a055391a99a5", "tree": "b9d756464d89949651e5acd1df97846af3028df0", "parents": [ "9c31fd635ddfae6eb61712491770befa2ce1fdde" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Sep 12 22:52:47 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:25 2008 -0400" }, "message": "mac80211: fix virtual interfaces vs. injection\n\nCurrently, virtual interface pointers passed to drivers might be\nfrom monitor interfaces and as such completely uninitialised\nbecause we do not tell the driver about monitor interfaces when\nthose are created. Instead of passing them, we should therefore\nindicate to the driver that there is no information; do that by\npassing a NULL value and adjust drivers to cope with it.\n\nAs a result, some mac80211 API functions also need to cope with\na NULL vif pointer so drivers can still call them unconditionally.\n\nAlso, when injecting frames we really don\u0027t want to pass NULL all\nthe time, if we know we are the source address of a frame and have\na local interface for that address, we can to use that interface.\nThis also helps with processing the frame correctly for that\ninterface which will help the 802.11w implementation. It\u0027s not\nentirely correct for VLANs or WDS interfaces because there the MAC\naddress isn\u0027t unique, but it\u0027s already a lot better than what we\ndo now.\n\nFinally, when injecting without a matching local interface, don\u0027t\nassign sequence numbers at all.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "687c7c0807371aeaa94ff2fff511eeb326b5c5de", "tree": "5f1a51d7f42dba9718ab7286768a5d3c7a4b4b34", "parents": [ "ae17e986091637e7ef5a8224c7b689029b105131" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 03:14:11 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:24 2008 -0400" }, "message": "mac80211: share sta_info-\u003eht_info\n\nRate control algorithms may need access to a station\u0027s\nHT capabilities, so share the ht_info struct in the\npublic station API.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "323ce79a9cdbf838ea577677b1ddace8e0b4d4c6", "tree": "f14a67ec7927865dc1537b2c3a4fb20c0325f517", "parents": [ "b7e35008815a1c39123f4dd53b430788e2e18da4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 02:45:11 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:24 2008 -0400" }, "message": "mac80211: share sta-\u003esupp_rates\n\nAs more preparation for a saner rate control algorithm API,\nshare the supported rates bitmap in the public API.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "17741cdc264e4d768167766a252210e201c1519a", "tree": "72c0e697af29a40c03bce002b529c3951d34a3b7", "parents": [ "8aa21e6fd703cb3fed66ac07dcbcb861f00cf6d6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 00:02:02 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:23 2008 -0400" }, "message": "mac80211: share STA information with driver\n\nThis patch changes mac80211 to share some more data about\nstations with drivers. Should help iwlwifi and ath9k when\n they get around to updating, and might also help with\nimplementing rate control algorithms without internals.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Sujith Manoharan \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "05c914fe330fa8e1cc67870dc0d3809dfd96c107", "tree": "df53bcab47335f3361c09478d6b1447b7d298536", "parents": [ "96dd22ac06b0dbfb069fdf530c72046a941e9694" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 00:01:58 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:23 2008 -0400" }, "message": "mac80211: use nl80211 interface types\n\nThere\u0027s really no reason for mac80211 to be using its\nown interface type defines. Use the nl80211 types and\nsimplify the configuration code a bit: there\u0027s no need\nto translate them any more now.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "96dd22ac06b0dbfb069fdf530c72046a941e9694", "tree": "4dbf19921a1d4add0ca03a0ff1d7db37c4ecb8be", "parents": [ "ccd7b36286f8c42b3fa95c5a8d402162ffab41df" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 00:01:57 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:22 2008 -0400" }, "message": "mac80211: inform driver of basic rateset\n\nDrivers need to know the basic rateset to be able to configure\nthe ACK/CTS programming in hardware correctly.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5bc75728fd43bb15b46f16ef465bcf9d487393cf", "tree": "5732adee3965970390bf7953d214c757bbdba2a2", "parents": [ "b7413430d4d2a6168e68231d9f93763047b6d60c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 00:01:51 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:20 2008 -0400" }, "message": "mac80211: fix scan vs. interface removal race\n\nWhen we remove an interface, we can currently end up having\na pointer to it left in local-\u003escan_sdata after it has been\nset down, and then with a hardware scan the scan completion\ncan try to access it which is a bug. Alternatively, a scan\nthat started as a hardware scan may terminate as though it\nwas a software scan, if the timing is just right.\n\nOn SMP systems, software scan also has a similar problem,\njust canceling the delayed work and setting a flag isn\u0027t\nenough since it may be running concurrently; in this case\nwe would also never restore state of other interfaces.\n\nThis patch hopefully fixes the problems by always invoking\nieee80211_scan_completed or requiring it to be invoked by\nthe driver, I suspect the drivers that have -\u003ehw_scan() are\nbuggy. The bug will not manifest itself unless you remove\nthe interface while hw-scanning which will also turn off\nthe hw, and then add a new interface which will be unusable\nuntil you scan once.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b2e1b30290539b344cbaff0d9da38012e03aa347", "tree": "8d021d078c12f3d7b47da4b52a54eff4509daa98", "parents": [ "63f2c0464875b6ef2132cecb19b2a5abbf061227" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Tue Sep 09 23:19:48 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:19 2008 -0400" }, "message": "cfg80211: Add new wireless regulatory infrastructure\n\nThis adds the new wireless regulatory infrastructure. The\nmain motiviation behind this was to centralize regulatory\ncode as each driver was implementing their own regulatory solution,\nand to replace the initial centralized code we have where:\n\n* only 3 regulatory domains are supported: US, JP and EU\n* regulatory domains can only be changed through module parameter\n* all rules were built statically in the kernel\n\nWe now have support for regulatory domains for many countries\nand regulatory domains are now queried through a userspace agent\nthrough udev allowing distributions to update regulatory rules\nwithout updating the kernel.\n\nEach driver can regulatory_hint() a regulatory domain\nbased on either their EEPROM mapped regulatory domain value to a\nrespective ISO/IEC 3166-1 country code or pass an internally built\nregulatory domain. We also add support to let the user set the\nregulatory domain through userspace in case of faulty EEPROMs to\nfurther help compliance.\n\nSupport for world roaming will be added soon for cards capable of\nthis.\n\nFor more information see:\n\nhttp://wireless.kernel.org/en/developers/Regulatory/CRDA\n\nFor now we leave an option to enable the old module parameter,\nieee80211_regdom, and to build the 3 old regdomains statically\n(US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY.\nThese old static definitions and the module parameter is being\nscheduled for removal for 2.6.29. Note that if you use this\nyou won\u0027t make use of a world regulatory domain as its pointless.\nIf you leave this option enabled and if CRDA is present and you\nuse US or JP we will try to ask CRDA to update us a regulatory\ndomain for us.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fe3fa827314b877486c515a001c3e6f604f6f16f", "tree": "64b04c2ee021bf8428bc2f5e9370459bf0ae9459", "parents": [ "69e6c010fd5f5015d3cc64718fbe266face93770" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Sep 08 11:05:09 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Sep 11 15:53:34 2008 -0400" }, "message": "mac80211: make conf_tx non-atomic\n\nThe conf_tx callback currently needs to be atomic, this requirement\nis just because it can be called from scanning. This rearranges it\nslightly to only update while not scanning (which is fine, we\u0027ll be\ngetting beacons when associated) and thus removes the atomic\nrequirement.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9f1ba9062e032fb7b395cd27fc564754fe4e9867", "tree": "6610106cd769aa3cc144b7a4f1547e07eeba5c88", "parents": [ "7f93ea3e246db512c0c17b79847f57dd3a2891e1" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Thu Aug 07 20:07:01 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 29 16:23:55 2008 -0400" }, "message": "mac80211/cfg80211: Add BSS configuration options for AP mode\n\nThis change adds a new cfg80211 command, NL80211_CMD_SET_BSS, to allow\nAP mode BSS parameters to be changed from user space (e.g., hostapd).\nThe drivers using mac80211 are expected to be modified with separate\nchanges to use the new BSS info parameter for short slot time in the\nbss_info_changed() handler.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6b644e524bbd4089a28e0711de4f1cf2daa5db50", "tree": "3c3993bc52c10aa0aa570dd60c3d5b78c56a80ae", "parents": [ "b73d70ad8665fd3f35c855075b9a94de3e2b69e2" ], "author": { "name": "Harvey Harrison", "email": "harvey.harrison@gmail.com", "time": "Tue Jul 15 18:44:12 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 22 16:29:54 2008 -0400" }, "message": "mac80211: remove ieee80211_get_hdrlen\n\nAll users have been moved over to the version taking a le16 frame control\nrather than a cpu-endian value.\n\nSigned-off-by: Harvey Harrison \u003charvey.harrison@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b4f28bbb9bf0b2c829ecf97ce2173f204fde4f10", "tree": "1ae74cd00a46086f7e5f31d140bf75b8793507ef", "parents": [ "63266a653589e1a237527479f10212ea77ce7844" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Jul 30 17:19:55 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 22 16:29:50 2008 -0400" }, "message": "mac80211: add rx status flag for short preamble\n\nand use it for the radiotap header\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "92ab85354993ac3a364c65cab45745af470ffc67", "tree": "b36501661ee9093cb8e66919bbebbca4374c36d6", "parents": [ "5442060c08a49bd0b416f033e0ae43ccedef5278" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Thu Jul 24 21:02:04 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 22 16:29:50 2008 -0400" }, "message": "mac80211: add ieee80211_queue_stopped)\n\nThis patch adds ieee80211_queue_stopped that let drivers to query\nqueue status\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "546c80c91f8d847477ee8354aad26f116048169d", "tree": "8e07ae6911fd017be50496394eaf5933fd79c5f9", "parents": [ "d47c3cebf5aae9d72b2cc18e5ac3b520fdbb0bca" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Aug 14 11:43:20 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 18 11:05:14 2008 -0400" }, "message": "mac80211: remove kdoc references to IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE\n\nIEEE80211_HW_HOST_GEN_BEACON_TEMPLATE was made unnecessary in\nthe recent revamp on beacon configuration.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea95bba41e69c616bb1512cf59d22f33266b8568", "tree": "fe3d17351465189b041bf20c0c9f6c4835d63997", "parents": [ "98f7dfd86cbbd377e2cbc293529681b914296f68" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Fri Jul 18 13:53:00 2008 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 04 15:09:07 2008 -0400" }, "message": "mac80211: make listen_interval be limited by low level driver\n\nThis patch makes possible for a driver to specify maximal listen interval\nThe possibility for user to configure listen interval is not implemented\nyet, currently the maximum provided by the driver or 1 is used.\nMac80211 uses config handler to set listen interval for to the driver.\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "98f7dfd86cbbd377e2cbc293529681b914296f68", "tree": "cce0e06183ae4b8ce0aa845cb56cf9ca90984749", "parents": [ "298df1f62aa69881528bf0f1c3c14395bc447846" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Fri Jul 18 13:52:59 2008 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 04 15:09:07 2008 -0400" }, "message": "mac80211: pass dtim_period to low level driver\n\nThis patch adds the dtim_period in ieee80211_bss_conf, this allows the low\nlevel driver to know the dtim_period, and to plan power save accordingly.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d0f09804144fd9471a13cf4d80e66842c7fa114f", "tree": "4a1f0f78bad7e5be4ad400397a19d4b8d6fbbdcd", "parents": [ "0ccd58fc03f40529f66190b1a41e92a732d2bda8" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 29 11:32:07 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 29 16:55:08 2008 -0400" }, "message": "mac80211: partially fix skb-\u003ecb use\n\nThis patch fixes mac80211 to not use the skb-\u003ecb over the queue step\nfrom virtual interfaces to the master. The patch also, for now,\ndisables aggregation because that would still require requeuing,\nwill fix that in a separate patch. There are two other places (software\nrequeue and powersaving stations) where requeue can happen, but that is\nnot currently used by any drivers/not possible to use respectively.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "605a0bd66d9d55e9ba46da1a9e5140c68bdf6d85", "tree": "f50c76d148bd0844b4ace3085e8ccaf99ca0cd71", "parents": [ "281c7413ed914623d3245299a4761b6b27ab9fdb" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 15 10:10:01 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 29 16:36:24 2008 -0400" }, "message": "mac80211: remove IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE flag\n\nI forgot this in the previous patch that made it unused.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "51cb6db0f5654f08a4a6bfa3888dc36a51c2df3e", "tree": "b9103a34674efeca9ffa2f9ef9cec1ee9735ab9d", "parents": [ "eae792b722fef08dcf3aee88266ee7def9710757" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jul 15 03:34:57 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jul 17 19:21:12 2008 -0700" }, "message": "mac80211: Reimplement WME using -\u003eselect_queue().\n\nThe only behavior change is that we do not drop packets under any\ncircumstances. If that is absolutely needed, we could easily add it\nback.\n\nWith cleanups and help from Johannes Berg.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f434b2d111d9ff84ebdd0f11a7ae42c761453259", "tree": "8c19b89773cb03812e81f3d170c97c31925dec36", "parents": [ "f591fa5dbbbeaebd95c9c019b3a536a327fb79de" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jul 10 11:22:31 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 14 14:52:57 2008 -0400" }, "message": "mac80211: fix struct ieee80211_tx_queue_params\n\nMultiple issues:\n - there are no \"default\" values needed\n - cw_min/cw_max can be larger than documented\n - restructure to decrease size\n - use get_unaligned_le16\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f591fa5dbbbeaebd95c9c019b3a536a327fb79de", "tree": "fdede2804a4d962b072a88dbee870ba41eeb8964", "parents": [ "22bb1be4d271961846cd0889b0f8d671db773080" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jul 10 11:21:26 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 14 14:52:57 2008 -0400" }, "message": "mac80211: fix TX sequence numbers\n\nThis patch makes mac80211 assign proper sequence numbers to\nQoS-data frames. It also removes the old sequence number code\nbecause we noticed that only the driver or hardware can assign\nsequence numbers to non-QoS-data and especially management\nframes in a race-free manner because beacons aren\u0027t passed\nthrough mac80211\u0027s TX path.\n\nThis patch also adds temporary code to the rt2x00 drivers to\nnot break them completely, that code will have to be reworked\nfor proper sequence numbers on beacons.\n\nIt also moves sequence number assignment down in the TX path\nso no sequence numbers are assigned to frames that are dropped.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9d139c810a2aa17365cc548d0cd2a189d8433c65", "tree": "ef10ca55f93689ab97368376d277102d2527c961", "parents": [ "f3947e2dfa3b18f375b7acd03b7ee2877d0751fc" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 09 14:40:37 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 14 14:30:07 2008 -0400" }, "message": "mac80211: revamp beacon configuration\n\nThis patch changes mac80211\u0027s beacon configuration handling\nto never pass skbs to the driver directly but rather always\nrequire the driver to use ieee80211_beacon_get(). Additionally,\nit introduces \"change flags\" on the config_interface() call\nto enable drivers to figure out what is changing. Finally, it\nremoves the beacon_update() driver callback in favour of\nhaving IBSS beacon delivered by ieee80211_beacon_get() as well.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "49292d56352a6ab90d04c3448dd8b6106dfef2d6", "tree": "d207a45ec1333831a82f2c9b2655b2a081ae889e", "parents": [ "79d16385c7f287a33ea771c4dbe60ae43f791b49" ], "author": { "name": "Samuel Ortiz", "email": "samuel@sortiz.org", "time": "Fri Jul 04 10:49:31 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 14 14:30:06 2008 -0400" }, "message": "mac80211: power management wext hooks\n\nThis patch implements the power management routines wireless extensions\nfor mac80211.\nFor now we only support switching PS mode between on and off.\n\nSigned-off-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6ef307bc561911c8cdda98ef3896b5982b602a43", "tree": "e9f78dc7bfe9907b68f25a68441715856b52b1f5", "parents": [ "fd4484af7c02b31bcb6090eeb0d85cf947719f2d" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Thu Jul 03 13:52:18 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 08 14:16:03 2008 -0400" }, "message": "mac80211: fix lots of kernel-doc\n\nFix more than 50 kernel-doc warnings in ieee80211/mac80211 kernel-doc notation.\nFix a few typos also.\n\nNote: Some fields are marked as TBD and need to have their description\ncorrected.\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "429a380571a6e6b8525b93161544eafc9b227e44", "tree": "a90ad1cba6ea557ace90a74ea02af9d5bcad36c1", "parents": [ "b2898a27809f54a33050a70d0eaa4a78194163a0" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Tue Jul 01 14:16:03 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 08 10:21:34 2008 -0400" }, "message": "mac80211: add block ack request capability\n\nThis patch adds block ack request capability\n\nSigned-off-by: Ester Kummer \u003cester.kummer@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea2aca084ba82aaf7c148d04914ceed8758ce08a", "tree": "dcb3f4f849cf48deac2dd3bafd5c2cd2f0e7dc79", "parents": [ "f3032be921cd126615ce3bfd7084e3d319f3f892", "c5a78ac00c400df29645e59938700301efb371d0" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Jul 05 23:08:07 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Jul 05 23:08:07 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tDocumentation/feature-removal-schedule.txt\n\tdrivers/net/wan/hdlc_fr.c\n\tdrivers/net/wireless/iwlwifi/iwl-4965.c\n\tdrivers/net/wireless/iwlwifi/iwl3945-base.c\n" }, { "commit": "06ff47bc9595848b818ac79e7d8069337c6e58b1", "tree": "a0a2d00f25f5c97f04dffd4c27059e1d217ea5a0", "parents": [ "7b1e78d5052a92e95d851fbb0236a712264fe7e8" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Wed Jun 18 17:53:44 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jun 30 17:37:34 2008 -0400" }, "message": "mac80211: add spectrum capabilities\n\nThis patch add spectrum capability and required information\nelements to association request providing AP has requested it and\nit is supported by the driver\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Assaf Krauss \u003cassaf.krauss@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "23976efedd5ecb420b87455787c537eb4aed1981", "tree": "902550e2716af5682de8219da1f228e13a5f0adb", "parents": [ "1bcca3c463e4930cef9986b05165bb0b3eb46f63" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Sat Jun 28 02:50:13 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jun 30 15:43:53 2008 -0400" }, "message": "mac80211: don\u0027t accept WEP keys other than WEP40 and WEP104\n\nThis patch makes mac80211 refuse a WEP key whose length is not WEP40 nor\nWEP104.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "428da76523e4a9c08bdfadc25a05b520f19b9133", "tree": "4fcdffdd45b38e81f11631867aaf75db676e3b9c", "parents": [ "f37d08bddc5cb8de18e55f2b0a401b3eb6269af4" ], "author": { "name": "Ivo van Doorn", "email": "ivdoorn@gmail.com", "time": "Tue Jun 24 19:23:36 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 27 09:09:20 2008 -0400" }, "message": "mac80211: Add RTNL warning for workqueue\n\nThe workqueue provided by mac80211 should not be used for\nscheduled tasks that acquire the RTNL lock. This could be done\nwhen the driver uses the function ieee80211_iterate_active_interfaces()\nwithin the scheduled work. Such behavior will end in locking\ndependencies problems when an interface is being removed.\n\nThis patch will add a notification about the RTNL locking and\nthe mac80211 workqueue to prevent driver developers from\nblindly using it.\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ffd7891dc909b3648e87f7cf8f84a6dc12fc1cc6", "tree": "563c41b3bce49effd3544081cb54ba5ab6fdfb15", "parents": [ "61243d8e79de67d703b192fae2c4ab80fc0fac34" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Sat Jun 21 10:02:46 2008 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 27 09:09:17 2008 -0400" }, "message": "mac80211: Let drivers have access to TKIP key offets for TX and RX MIC\n\nSome drivers may want to to use the TKIP key offsets for TX and RX\nMIC so lets move this out. Lets also clear up a bit how this is used\ninternally in mac80211.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6693be7124cb8e4f15f0d80ed6e3e50678771737", "tree": "aadddb7a21250d1e7b76e0f4ba2ca124288515e3", "parents": [ "c9c6950c14ffc0e30e592fec1ebcb203ad3dff10" ], "author": { "name": "Harvey Harrison", "email": "harvey.harrison@gmail.com", "time": "Wed Jun 11 14:21:57 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Sat Jun 14 12:18:13 2008 -0400" }, "message": "mac80211: add utility function to get header length\n\nTake a __le16 directly rather than a host-endian value.\n\nSigned-off-by: Harvey Harrison \u003charvey.harrison@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c9c6950c14ffc0e30e592fec1ebcb203ad3dff10", "tree": "bcfdd7dea25e8b6acfea1a54ea28394a531e3fae", "parents": [ "8b7b1e05b0454f232b8ae1e6ee134b7f0b38abfb" ], "author": { "name": "Harvey Harrison", "email": "harvey.harrison@gmail.com", "time": "Wed Jun 11 14:21:57 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Sat Jun 14 12:18:12 2008 -0400" }, "message": "mac80211: make ieee80211_get_hdrlen_from_skb return unsigned\n\nMany callers already expect it to.\n\nSigned-off-by: Harvey Harrison \u003charvey.harrison@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "788c0a53164c05c5ccdb1472474372b72ba74644", "tree": "5f274102e3dc4bcca6cb3a695aa2c8228ad5fc4f", "parents": [ "e64bda89b8fe81cce9b4a20885d2c204c2d52532", "78cf07472f0ede8394bacc4bc02354505080cfe1" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jun 10 01:54:31 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jun 10 01:54:31 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n\nConflicts:\n\n\tdrivers/net/ps3_gelic_wireless.c\n\tdrivers/net/wireless/libertas/main.c\n" }, { "commit": "43154d08d6bb5c69aa0d0e3448fb348b4cd84e91", "tree": "176edb26aad2d33e8be36530b66b19d0603c4b1d", "parents": [ "03194379a77b02df3404ec4848a50c6784e9a8a5", "289c79a4bd350e8a25065102563ad1a183d1b402" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun May 25 23:26:10 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun May 25 23:26:10 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tdrivers/net/cpmac.c\n\tnet/mac80211/mlme.c\n" }, { "commit": "e2530083609148a7835b54c431f6b8956407c1f6", "tree": "8ed43347541444c7a72d2c79f550f69a93cad591", "parents": [ "eefce91a384a64c7bbf913eb08c4adfb911c3639" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat May 17 00:57:14 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 21 21:48:14 2008 -0400" }, "message": "mac80211: use multi-queue master netdevice\n\nThis patch updates mac80211 and drivers to be multi-queue aware and\nuse that instead of the internal queue mapping. Also does a number\nof cleanups in various pieces of the code that fall out and reduces\ninternal mac80211 state size.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eefce91a384a64c7bbf913eb08c4adfb911c3639", "tree": "ac091cd36f7739d9934a7ee01950a9da3e7cfc8b", "parents": [ "e93048825face354ecb0cb3ac00190c764a44f45" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat May 17 00:57:13 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 21 21:48:13 2008 -0400" }, "message": "mac80211: dont allow fragmentation and requeuing on A-MPDU queues\n\nThere really is no reason for a driver to reject a frame on\nan A-MPDU queue when it can stop that queue for any period\nof time and is given frames one by one. Hence, disallow it\nwith a big warning and reduce mac80211-internal state.\n\nAlso add a warning when we try to fragment a frame destined\nfor an A-MPDU queue and drop it, the actual bug needs to be\nfixed elsewhere but I\u0027m not exactly sure how to yet.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e039fa4a4195ac4ee895e6f3d1334beed63256fe", "tree": "cfd0762d73df96b73052378be7b157c4ac6e7035", "parents": [ "e24549485f859be6518929bb1c9c0257d79f033d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu May 15 12:55:29 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 21 21:48:11 2008 -0400" }, "message": "mac80211: move TX info into skb-\u003ecb\n\nThis patch converts mac80211 and all drivers to have transmit\ninformation and status in skb-\u003ecb rather than allocating extra\nmemory for it and copying all the data around. To make it fit,\na union is used where only data that is necessary for all steps\nis kept outside of the union.\n\nA number of fixes were done by Ivo, as well as the rt2x00 part\nof this patch.\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2e92e6f2c50b4baf85cca968f0e6f1b5c0df7d39", "tree": "e845c2f3af6d29c807c540366b97b1d886b92c91", "parents": [ "36d6825b91bc492b65b6333c369cd96a2fc8c903" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu May 15 12:55:27 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 21 21:48:09 2008 -0400" }, "message": "mac80211: use rate index in TX control\n\nThis patch modifies struct ieee80211_tx_control to give band\ninfo and the rate index (instead of rate pointers) to drivers.\nThis mostly serves to reduce the TX control structure size to\nmake it fit into skb-\u003ecb so that the fragmentation code can\nput it there and we can think about passing it to drivers that\nway in the future.\n\nThe rt2x00 driver update was done by Ivo, thanks.\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "36d6825b91bc492b65b6333c369cd96a2fc8c903", "tree": "9113754ce110d593da8019a329c4afb229a036b3", "parents": [ "c4680470a34a4f39af3d0a5c40f70befd8701908" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu May 15 12:55:26 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 21 21:48:08 2008 -0400" }, "message": "mac80211: let drivers wake but not start queues\n\nHaving drivers start queues is just confusing, their -\u003estart()\ncallback can block and do whatever is necessary, so let mac80211\nstart queues and have drivers wake queues when necessary (to get\npackets flowing again right away.)\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2f561feb386d6adefbad63c59a1fcd298ac6a79c", "tree": "9f2979c3539314b58f9a417b26347b7b09dd2722", "parents": [ "34a961f7db36f10abd6b153411fe8c810f21f6b3" ], "author": { "name": "Ivo van Doorn", "email": "ivdoorn@gmail.com", "time": "Sat May 10 13:40:49 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 16 17:15:09 2008 -0400" }, "message": "mac80211: Add RTNL version of ieee80211_iterate_active_interfaces\n\nSince commit e38bad4766a110b61fa6038f10be16ced8c6cc38\n\tmac80211: make ieee80211_iterate_active_interfaces not need rtnl\nrt2500usb and rt73usb broke down due to attempting register access\nin atomic context (which is not possible for USB hardware).\n\nThis patch restores ieee80211_iterate_active_interfaces() to use RTNL lock,\nand provides the non-RTNL version under a new name:\n\tieee80211_iterate_active_interfaces_atomic()\n\nSo far only rt2x00 uses ieee80211_iterate_active_interfaces(), and those\ndrivers require the RTNL version of ieee80211_iterate_active_interfaces().\nSince they already call that function directly, this patch will automatically\nfix the USB rt2x00 drivers.\n\nv2: Rename ieee80211_iterate_active_interfaces_rtnl\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "566bfe5a8bcde13188a356f77666f8115813cf31", "tree": "785412c505e9efbd0fac477d71c8ca6945ffce04", "parents": [ "fac371d9f09f461dfe9fbbceb2a38e2e12164dda" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu May 08 19:15:40 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 14 16:29:49 2008 -0400" }, "message": "mac80211: use hardware flags for signal/noise units\n\ntrying to clean up the signal/noise code. the previous code in mac80211 had\nconfusing names for the related variables, did not have much definition of\nwhat units of signal and noise were provided and used implicit mechanisms from\nthe wireless extensions.\n\nthis patch introduces hardware capability flags to let the hardware specify\nclearly if it can provide signal and noise level values and which units it can\nprovide. this also anticipates possible new units like RCPI in the future.\n\nfor signal:\n\n IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific\n IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point\n IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW\n\nfor noise we currently only have dBm:\n\n IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW\n\nif IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has\nto provide the maximum value (max_signal) it reports in order for applications\nto make sense of the signal values.\n\ni tried my best to find out for each driver what it can provide and update it\nbut i\u0027m not sure (?) for some of them and used the more conservative guess in\ndoubt. this can be fixed easily after this patch has been merged by changing\nthe hardware flags of the driver.\n\nDRIVER SIGNAL MAX\tNOISE QUAL\n-----------------------------------------------------------------\nadm8211 unspec(?) 100 n/a missing\nat76_usb unspec(?) (?) unused missing\nath5k dBm dBm percent rssi\nb43legacy dBm dBm percent jssi(?)\nb43 dBm dBm percent jssi(?)\niwl-3945 dBm dBm percent snr+more\niwl-4965 dBm dBm percent snr+more\np54 unspec 127 n/a missing\nrt2x00 dBm\t n/a percent rssi+tx/rx frame success\n rt2400 dBm n/a\n rt2500pci dBm n/a\n rt2500usb dBm n/a\n rt61pci dBm n/a\n rt73usb dBm n/a\nrtl8180 unspec(?) 65 n/a (?)\nrtl8187 unspec(?) 65 (?) noise(?)\nzd1211 dB(?) 100 n/a percent\n\ndrivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e100bb64bf7cdeae7f742a65ee1985649a7fd1b4", "tree": "87ed4147c4dc583aba7c27b0717febb6fabdc76a", "parents": [ "36fc6757fe711def63ea3686bf6ed475d714e114" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Apr 30 18:51:21 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 07 15:02:26 2008 -0400" }, "message": "mac80211: QoS related cleanups\n\nThis\n * makes the queue number passed to drivers a u16\n (as it will be with skb_get_queue_mapping)\n * removes the useless queue number defines\n * splits hw-\u003equeues into hw-\u003equeues/ampdu_queues\n * removes the debugfs files for per-queue counters\n * removes some dead QoS code\n * removes the beacon queue configuration for IBSS\n so that the drivers now never get a queue number\n bigger than (hw-\u003equeues + hw-\u003eampdu_queues - 1)\n for tx and only in the range 0..hw-\u003equeues-1 for\n conf_tx.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "36fc6757fe711def63ea3686bf6ed475d714e114", "tree": "ffaff0160068b871c53c33c4d290cfafd73cc1c1", "parents": [ "57ffc589a92424f9def74fe0d49b2f7763ff07fd" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Apr 29 17:19:00 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 07 15:02:26 2008 -0400" }, "message": "mac80211: remove queue info from ieee80211_tx_status\n\nThe queue info in struct ieee80211_tx_status is never used.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "57ffc589a92424f9def74fe0d49b2f7763ff07fd", "tree": "2ec3f60cac2e5757206dee219e7b3a60ded13004", "parents": [ "3e0d4cb12f6fd97193a455b49125398b2231c87c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Apr 29 17:18:59 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 07 15:02:26 2008 -0400" }, "message": "mac80211: clean up get_tx_stats callback\n\nThe callback takes a ieee80211_tx_queue_stats with a contained\narray of ieee80211_tx_queue_stats_data, remove the former, rename\nthe latter to ieee80211_tx_queue_stats and make tx_stats() take\nthe array directly.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c6adbd2158fee972adcc6232de5e2ef375f1f782", "tree": "5bd5392cddcc6ebdb044faa2c06f3e7d71244148", "parents": [ "988c0f723d0b1abb399e6e71d8bf3f8bf1949a70" ], "author": { "name": "Ivo van Doorn", "email": "ivdoorn@gmail.com", "time": "Thu Apr 17 21:11:18 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 07 15:02:11 2008 -0400" }, "message": "mac80211: Add IEEE80211_KEY_FLAG_PAIRWISE\n\nThis adds a new flag to the ieee80211_key_conf structure.\nThis flag will inform the driver the key is pairwise rather then\na shared key.\n\nThis is important for drivers who support both types of keys,\nand need to be informed which type of key this is. Alternative\nwould be drivers checking the address argument of set_key(),\nbut it will be safer when mac80211 is more explicit.\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1c014420583564ac09e3b67006f2e7050861e66b", "tree": "12f075007d1e7d603a6142ba0a4f32b2dee1cefb", "parents": [ "6f4083aadd57e3da12fa4e67fcadaec23138a315" ], "author": { "name": "Ivo van Doorn", "email": "ivdoorn@gmail.com", "time": "Thu Apr 17 19:41:02 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 07 15:02:11 2008 -0400" }, "message": "mac80211: Replace ieee80211_tx_control-\u003ekey_idx with ieee80211_key_conf\n\nThe hw_key_idx inside the ieee80211_key_conf structure does\nnot provide all the information drivers might need to perform\nhardware encryption.\n\nThis is in particular true for rt2x00 who needs to know the\nkey algorithm and whether it is a shared or pairwise key.\n\nBy passing the ieee80211_key_conf pointer it assures us that\ndrivers can make full use of all information that it should know\nabout a particular key.\n\nAdditionally this patch updates all drivers to grab the hw_key_idx from\nthe ieee80211_key_conf structure.\n\nv2: Removed bogus u16 cast\nv3: Add warning about ieee80211_tx_control pointers\nv4: Update warning about ieee80211_tx_control pointers\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d18ef29f34eb33099d387a327abe139f3915a829", "tree": "18547f7c3a6f9e9c86249bcafbfe9e3cc4845db2", "parents": [ "8d0c7fad35538e02dff6fdb2d67943ae582819b3" ], "author": { "name": "Reinette Chatre", "email": "reinette.chatre@intel.com", "time": "Wed Apr 09 16:56:15 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 16 15:59:56 2008 -0400" }, "message": "mac80211: no BSS changes to driver from beacons processed during scanning\n\nThere is no need to send BSS changes to driver from beacons processed\nduring scanning. We are more interested in beacons from an AP with which\nwe are associated - these will still be used to send updates to driver as\nthe beacons are received without scanning.\n\nThis change·removes the requirement that bss_info_changed needs to be atomic.\nThe beacons received during scanning are processed from a tasklet, but if we\ndo not call bss_info_changed for these beacons there is no need for it to be\natomic. This function (bss_info_changed) is called either from workqueue or\nioctl in all other instances.\n\nSigned-off-by: Reinette Chatre \u003creinette.chatre@intel.com\u003e\nAcked-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "84363e6e07f17f8cc580065260907ee3f0520485", "tree": "f0113ebc756892a55543d8c6511291cad7ec6644", "parents": [ "380a942b9177dcae1429fdd0f3639f92d9ab139d" ], "author": { "name": "Mohamed Abbas", "email": "mabbas@linux.intel.com", "time": "Fri Apr 04 16:59:58 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 08 16:44:43 2008 -0400" }, "message": "mac80211: notify mac from low level driver (iwlwifi)\n\nAdd new API to MAC80211 to allow low level driver to\nnotify MAC with driver status.\n\nSigned-off-by: Mohamed Abbas \u003cmabbas@linux.intel.com\u003e\nSigned-off-by: Reinette Chatre \u003creinette.chatre@intel.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fff7710937f755099209357e5b5740d42a2c9f97", "tree": "662338e2e4ae258fcca7b32b1b803137c56b3487", "parents": [ "2aee82de5238625a7664f88d6ebff9de467bb685" ], "author": { "name": "Chr", "email": "chunkeey@web.de", "time": "Tue Apr 01 21:45:18 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 08 15:05:57 2008 -0400" }, "message": "mac80211: add station aid into ieee80211_tx_control\n\nThis patch is necessary for the upcoming Accesspoint patch for p54.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@web.de\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "21c0cbe760ca6b5d4c6927c3ec1352a843a8c11c", "tree": "e1f086fd604c2834a8426effd289f609a746e1fe", "parents": [ "98952d5decf8195b2cbb96d47572278335a8a8d8" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Fri Mar 28 16:33:34 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 08 15:05:56 2008 -0400" }, "message": "mac80211: add association capabilty and timing info into bss_conf\n\nThis patch adds assocation capability, timestamp (tsf) and beacon interval\nto bss_conf. This is required for successful assocation of iwlwifi drivers\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Gregory Greenman \u003cgregory.greenman@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "38668c059f5202f5fd9612391f9aa1b38a97241b", "tree": "bf331e19aa1a8a8586b3cc2905c284b6f6b03cbd", "parents": [ "9788ba7500c3a6268ceb63296a0f37f34d450beb" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Fri Mar 28 16:33:32 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 08 15:05:56 2008 -0400" }, "message": "mac80211: eliminate conf_ht\n\nThis patch eliminates the use of conf_ht, replacing it with\nbss_info_changed.\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9ae4fda332df616ef47d5bb710c39681641d4303", "tree": "7cecfed1dfac8e6fdf7e33957d7da7767a35619c", "parents": [ "5d2cdcd4e85c5187db30a6b29f79fbbe59f39f78" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Mar 20 15:06:42 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 25 16:41:53 2008 -0400" }, "message": "mac80211: allows driver to request a Phase 1 RX key\n\nThis patch makes mac80211 able to send a phase1 key for TKIP\ndecryption.\nThis is needed for drivers that don\u0027t do the rekeying by themselves\n(i.e. iwlwifi). Upon IV16 wrap around, the packet is decrypted in SW,\nif decryption is ok, mac80211 calls to update_tkip_key with a new\nphase 1 RX key.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5d2cdcd4e85c5187db30a6b29f79fbbe59f39f78", "tree": "0c7e079a30871fb593c282a7a711ccc90c31af1a", "parents": [ "17e476b8db13790c03e2c46d93abc71468fca47e" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Mar 20 15:06:41 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 25 16:41:52 2008 -0400" }, "message": "mac80211: get a TKIP phase key from skb\n\nThis patch makes mac80211 able to compute a TKIP key from an skb.\nThe requested key can be a phase 1 or a phase 2 key.\nThis is useful for drivers who need to provide tkip key to their\nHW to enable HW encryption.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6c5ef8a7059e4f7adc37b337face8b0a8cbd4f48", "tree": "ef7aba9bc8dccede36275bfb2988012d7d2a7cf6", "parents": [ "b716bb918f8f7967e361770eb1545d2b4bcffc26" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Wed Mar 05 17:38:59 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 07 16:03:01 2008 -0500" }, "message": "mac80211: document IEEE80211_TXCTL_OFDM_HT\n\nThis patch clarifies the use of IEEE80211_TXCTL_OFDM_HT flag.\n\nCan by united with patch \"mac80211: adding mac80211_tx_control\nflags and HT flags\"\n\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "11f4b1cec98ad95abda80dc20bdc3cecac145d77", "tree": "c3b3c81a1e41020f30614ea1bc7377a18938bab9", "parents": [ "134eb5d327270c5d3816f8d812e68aa27a335ca8" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Tue Mar 04 18:09:26 2008 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 07 16:02:59 2008 -0500" }, "message": "mac80211: adding mac80211_tx_control_flags and HT flags\n\nThis patch makes enum from the defines previously dwelled inside\nieee80211_tx_control for better readability.\nThe patch also addes HT flags, for 802.11n drivers:\n- IEEE80211_TXCTL_OFDM_HT: request low-level driver to use HT OFDM rates\n- IEEE80211_TXCTL_GREEN_FIELD: use green field protection\n- IEEE80211_TXCTL_DUP_DATA: duplicate data on both 20 Mhz channels\n- IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame in 40Mhz width\n- IEEE80211_TXCTL_SHORT_GI: send this frame with short guard interval\n\nTx command can be a combination of any of these flags, along with\nbitrate represented by ieee80211_rate. this will allow legacy drivers to\nswitch easily to any 11n rate representation.\n\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nCC: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dbbea6713d6096cd1c411cb453a6b71292c78b33", "tree": "6e824acc2b680350c4c4ebebaccf32b9b01c0e96", "parents": [ "7c8076bd8be3fd2a9a94f9687cf39e3505f0e4ec" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Feb 26 14:34:06 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Mar 06 15:30:47 2008 -0500" }, "message": "mac80211: add documentation book\n\nQuite a while ago I started this book. The required kernel-doc\npatches have since gone into the tree so it is now possible to\nbuild the book in mainline.\n\nThe actual documentation is still rather incomplete and not all\nthings are linked into the book, but this enables us to edit\nthe documentation collaboratively, hopefully driver authors can\nadd documentation based on their experience with mac80211.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "902acc7896d7649fb30e4b22bd4e643c7f34b02c", "tree": "8d8f2838fead8417e16e801383ddb2691a89719f", "parents": [ "f7a921443740d7dafc65b17aa32531730d358f50" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat Feb 23 15:17:19 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Mar 06 15:30:42 2008 -0500" }, "message": "mac80211: clean up mesh code\n\nVarious cleanups, reducing the #ifdef mess and other things.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6032f934c818e5c3435c9f17274fe1983f53c6b4", "tree": "c095cb07ffb67dd81df0d4d0573e060e132fe082", "parents": [ "2ec600d672e74488f8d1acf67a0a2baed222564c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat Feb 23 15:17:07 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Mar 06 15:30:41 2008 -0500" }, "message": "mac80211: add mesh interface type\n\nThis adds the mesh interface type.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2485f7105f20f85c2dbebc67be6b2cb97175fa7e", "tree": "c8c620864bb220d8a299d7f45675334879eb742a", "parents": [ "38c07b430b50172b803fe4c7f76cba580ba9931f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Feb 25 16:27:41 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:41:58 2008 -0500" }, "message": "mac80211: clarify use of TX status/RX callbacks\n\nThis patch clarifies the use of the irqsafe vs. non-irq-safe\nfunctions and their respective locking requirements.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d46e144b65bf053b25d134ec9f52a38e63e04bb4", "tree": "95a3e4ea7660511375f71c54335045a5d1441b1a", "parents": [ "d97cf01576e1867d26b5c8de360380f815a1b7df" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Feb 20 23:59:33 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:41:32 2008 -0500" }, "message": "mac80211: rework TX filtered frame code\n\nThis reworks the code for TX filtered frames, splitting it out to\na new function to handle those cases, making the clear instruction\na flag and renaming a few things to be easier to understand and\nless Atheros hardware specific. Finally, it also makes the comments\nexplain more.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9d9bf77d16ba527f6f63846ca18cf20ae6e8d697", "tree": "a8ae534cb92ef2368fee0b5fb4d092530a8017ee", "parents": [ "a607268a0d5532d6ae3777ddd0339ff7d8b037a0" ], "author": { "name": "Bruno Randolf", "email": "bruno@thinktube.com", "time": "Mon Feb 18 11:21:36 2008 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:37:12 2008 -0500" }, "message": "mac80211: enable IBSS merging\n\nenable IBSS cell merging. if an IBSS beacon with the same channel, same ESSID\nand a TSF higher than the local TSF (mactime) is received, we have to join its\nBSSID. while this might not be immediately apparent from reading the 802.11\nstandard it is compliant and necessary to make IBSS mode functional in many\ncases. most drivers have a similar behaviour.\n\n* move the relevant code section (previously only containing debug code) down\nto the end of the function, so we can reuse the bss structure.\n\n* we have to compare the mactime (TSF at the time of packet receive) rather\nthan the current TSF. since mactime is defined as the time the first data\nsymbol arrived we add the time until byte 24 where the timestamp resides, since\nthis is how the beacon timestamp is defined. as some some drivers are not able\nto give a reliable mactime we fall back to use the current TSF, which will be\nenough to catch most (but not all) cases where an IBSS merge is necessary.\n\n* in IBSS mode we want to allow beacons to override probe response info so we\ncan correctly do merges.\n\n* we don\u0027t only configure beacons based on scan results, so change that\nmessage.\n\n* to enable this we have to let all beacons thru in IBSS mode, even if they\nhave a different BSSID.\n\nSigned-off-by: Bruno Randolf \u003cbruno@thinktube.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c132bec33c2eb5e46d8e4b80cfa5a9656d8e57e7", "tree": "3a96d97adcbb4c47a349337a9d3943a54e2f06ce", "parents": [ "3230455d13860b26f638b9d58a8c5f20bf32fda2" ], "author": { "name": "Bruno Randolf", "email": "bruno@thinktube.com", "time": "Mon Feb 18 11:20:51 2008 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:37:11 2008 -0500" }, "message": "mac80211: better definition of mactime\n\ndefine mactime as the time when the first data symbol arrived at the HW. the\nold definition was questionable because 802.11 defines timestamp only for\nbeacon and probe response frames, and there it means the timestamp field.\n\na stricter definition of mactime is necessary for correct merging of IBSS.\n\nnote that it is up to the driver to convert whatever its hardware returns to\nthis definition. unfortunately we don\u0027t know for example when atheros hardware\ntakes its rx timestamp exactly :(\n\nSigned-off-by: Bruno Randolf \u003cbruno@thinktube.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d0f5afbe6de6b8c06f94a8a0b370252e3863afe7", "tree": "85ad53d8ec4e1c9d2c49d7219618549622000289", "parents": [ "3330d7be7008fa8e213648750fc13613eecc54bb" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Tue Feb 12 20:12:45 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:37:08 2008 -0500" }, "message": "mac80211: Extend filter flag documentation about unsupported flags\n\nThis extends the filter flags documentation to make it clear\nwhat clearing a flag really means.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3330d7be7008fa8e213648750fc13613eecc54bb", "tree": "89f8ce89b984819144d6643e7c4a5e7e2d67e7cc", "parents": [ "bb1eeff12d4cd6c706ef9fae340a9c93bb41ad05" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Feb 10 16:49:38 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:37:07 2008 -0500" }, "message": "mac80211: give burst time in txop rather than 0.1msec units\n\nThis changes mac80211 to pass the burst time to conf_tx in txop\nunits rather than 0.1msec units. 0.1msec units are only required\nby atheros hardware (according to current driver support), all\nother drivers do other calculations or require the txop value.\nTherefore, it results in fewer calculations and more precision\nif we just pass the txop value through to the driver.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8318d78a44d49ac1edf2bdec7299de3617c4232e", "tree": "d434634418edd7399737801615d247be06616fdd", "parents": [ "10b6b80145cc93887dd8aab99bfffa375e9add31" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jan 24 19:38:38 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:19:32 2008 -0500" }, "message": "cfg80211 API for channels/bitrates, mac80211 and driver conversion\n\nThis patch creates new cfg80211 wiphy API for channel and bitrate\nregistration and converts mac80211 and drivers to the new API. The\nold mac80211 API is completely ripped out. All drivers (except ath5k)\nare updated to the new API, in many cases I expect that optimisations\ncan be done.\n\nAlong with the regulatory code I\u0027ve also ripped out the\nIEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be\nunnecessary if the hardware simply gives us whatever channels it wants\nto support and we then enable/disable them as required, which is pretty\nmuch required for travelling.\n\nAdditionally, the patch adds proper \"basic\" rate handling for STA\nmode interface, AP mode interface will have to have new API added\nto allow userspace to set the basic rate set, currently it\u0027ll be\nempty... However, the basic rate handling will need to be moved to\nthe BSS conf stuff.\n\nI do expect there to be bugs in this, especially wrt. transmit\npower handling where I\u0027m basically clueless about how it should work.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "483fdcecc564ae6b011148a758517cf561f65678", "tree": "50598e24876a8ba9f8cb0cba3abe993d7a4122d6", "parents": [ "eb2ba62ee547b5ae7ca0339c75cd697f96060ca2" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Mon Jan 28 14:07:21 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:19:18 2008 -0500" }, "message": "mac80211: A-MPDU Tx change tx_status to support Block Ack data\n\nThis patch adds fields to ieee80211_tx_status in order to allow block ack\ninformation exchange between low-level driver,mac80211 and rate scaling\nmodule.\n\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9e7234923789897858e1a475c579b5e2e6ad5b74", "tree": "69e97df9ff34f9237bfddee6e99100e8e16e1da1", "parents": [ "eadc8d9e9047266a8914eb2ed4d36e797ce540d1" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Mon Jan 28 14:07:18 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:19:17 2008 -0500" }, "message": "mac80211: A-MPDU Tx adding qdisc support\n\nThis patch allows qdisc support in A-MPDU Tx. a method to\nhandle QoS \u003c-\u003e TID switches is present in this patch.\n\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0df3ef45a3d7b59cc53ce4e3611033c6e3b51a1b", "tree": "094a5340c7ded841c72c6542176568af7bd2a565", "parents": [ "8816edcea9009b66570bef10acde5a552a9b3b3c" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Mon Jan 28 14:07:15 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:19:13 2008 -0500" }, "message": "mac80211: A-MPDU Tx add session\u0027s and low level driver\u0027s API\n\nThis patch adds the API for 3 stages in A-MPDU Tx session flow:\n- request mac80211 to start/stop A-MPDU Tx session for specific TID. such a\n request should be issued by a load aware element, either mac80211 itself\n or external element.\n- requests by mac80211 to low-level driver to start/stop Tx aggregation.\n notice that low level driver responds now with Starting Sequence Number.\n- async feedback by low-level to mac80211 to inform that HW is ready for\n next A-MPDU Tx state.\nChanges in API to Rx A-MPDU were also made, reflected in iwlwifi changes as\nwell.\n\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "471b3efdfccc257591331724145f8ccf8b3217e1", "tree": "c9e576442c7b62c8c667ae1046e560323f0821fd", "parents": [ "2bc454b0b30b3645d114689b64321cb49be99923" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Dec 28 14:32:58 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 15:09:43 2008 -0800" }, "message": "mac80211: add unified BSS configuration\n\nThis patch (based on Ron Rindjunsky\u0027s) creates a framework for\na unified way to pass BSS configuration to drivers that require\nthe information, e.g. for implementing power save mode.\n\nThis patch introduces new ieee80211_bss_conf structure that is\npassed to the driver via the new bss_info_changed() callback\nwhen the BSS configuration changes.\n\nThis new BSS configuration infrastructure adds the following\nnew features:\n * drivers are notified of their association AID\n * drivers are notified of association status\n\nand replaces the erp_ie_changed() callback. The patch also does\nthe relevant driver updates for the latter change.\n\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "51fb61e76d952e6bc2fbdd9f0d38425fbab1cf31", "tree": "09618b395aae1b91fbc8dec7ea9397a9654a9f0f", "parents": [ "32bfd35d4b63bd63de4bb0d791ef049c3c868726" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 19 01:31:27 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 15:09:37 2008 -0800" }, "message": "mac80211: move interface type to vif structure\n\nDrivers that support mixed AP/STA operation may well need to\nknow the type of a virtual interface when iterating over them.\nThe easiest way to support that is to move the interface type\nvariable into the vif structure.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "32bfd35d4b63bd63de4bb0d791ef049c3c868726", "tree": "c1c213a35a00bcbe71a2ecc6521e19dec66cf6eb", "parents": [ "f653211197f3841f383fa9757ef8ce182c6cf627" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 19 01:31:26 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 15:09:36 2008 -0800" }, "message": "mac80211: dont use interface indices in drivers\n\nThis patch gets rid of the if_id stuff where possible in favour of\na new per-virtual-interface structure \"struct ieee80211_vif\". This\nstructure is located at the end of the per-interface structure and\ncontains a variable length driver-use data area.\n\nThis has two advantages:\n * removes the need to look up interfaces by if_id, this is better\n for working with network namespaces and performance\n * allows drivers to store and retrieve per-interface data without\n having to allocate own lists/hash tables\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cdcb006fbe7a74b5f7827f5c5c27e11399a2fab7", "tree": "6141a5b4315775bea971d3457191071d36061822", "parents": [ "df26e7ea049abe5104062f1f3e9ee7ede9d5104f" ], "author": { "name": "Ivo van Doorn", "email": "ivdoorn@gmail.com", "time": "Mon Jan 07 19:45:24 2008 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 15:01:04 2008 -0800" }, "message": "mac80211: Add radio led trigger\n\nSome devices have a seperate LED which indicates if the radio is\nenabled or not. This adds a LED trigger to mac80211 where drivers\ncan hook into when they are interested in radio status changes.\n\nv2: Check hw.conf.radio_enabled when calling start().\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1b7d03acbfe9d6f1ecf169e6494c5eca29fa0ed3", "tree": "182e48682aedbfbf16b92f5b946246a816f2ec11", "parents": [ "6368e4b18d5c71c73eecd96d568e726b80e5bce1" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Tue Dec 25 17:00:31 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 15:00:57 2008 -0800" }, "message": "mac80211: A-MPDU Rx add low level driver API\n\nThis patch adds the API to perform A-MPDU actions between mac80211 and low\nlevel driver.\n\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "62da92fb75c346b503bca765fd1337e08771c9fe", "tree": "86246464a61297e4df2e593c31b2e2dda325cf5c", "parents": [ "e8cbb4cbeb7642d179b01c35adf036ddb65f3dd0" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 19 02:03:31 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 14:59:50 2008 -0800" }, "message": "mac80211: support getting key sequence counters via cfg80211\n\nThis implements cfg80211\u0027s get_key() to allow retrieving the sequence\ncounter for a TKIP or CCMP key from userspace. It also cleans up and\ndocuments the associated low-level driver interface.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7d54d0ddd66678ada6635159dac1eb82ccbe34b5", "tree": "9afb4b9779762e160bf1aec9d2f304731ebac251", "parents": [ "4e20cb293cc0b30f32a53011fd6b38493d9fdcaa" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 19 01:31:25 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 14:59:47 2008 -0800" }, "message": "mac80211: allow easier multicast/broadcast buffering in hardware\n\nThere are various decisions influencing the decision whether to buffer\na frame for after the next DTIM beacon. The \"do we have stations in PS\nmode\" condition cannot be tested by the driver so mac80211 has to do\nthat. To ease driver writing for hardware that can buffer frames until\nafter the next DTIM beacon, introduce a new txctl flag telling the\ndriver to buffer a specific frame.\n\nWhile at it, restructure and comment the code for multicast buffering\nand remove spurious \"inline\" directives.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "678f5f7117d5780d3a51b201c9f44b7bf90f6a76", "tree": "ddf555061ec729e3e14eabc506d0c3b8f32f25b8", "parents": [ "ce3edf6d0b979fa4d5da7204fd8c6f77f2b8622a" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Dec 19 01:31:23 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 14:59:46 2008 -0800" }, "message": "mac80211: clean up eapol handling in TX path\n\nThe previous patch left only one user of the ieee80211_is_eapol()\nfunction and that user can be eliminated easily by introducing\na new \"frame is EAPOL\" flag to handle the frame specially (we\nalready have this information) instead of doing the (expensive)\nieee80211_is_eapol() all the time.\n\nAlso, allow unencrypted frames to be sent when they are injected.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c49e5ea322c2fb43f430abb3c4a49eae1394287e", "tree": "53188c8aab638c95ed489eab0c796c8ba9543847", "parents": [ "a07a5a86d091699fd5e791765b8a79e6b1ef96cb" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Dec 11 21:33:42 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 14:58:25 2008 -0800" }, "message": "mac80211: conditionally include timestamp in radiotap information\n\nThis makes mac80211 include the low-level MAC timestamp\nin the radiotap header if the driver indicated (by a new\nRX flag) that the timestamp is valid.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d3c990fb26b78f60614885d9ecaf7b7686b7b098", "tree": "4948049e6b1bd1ee0392173380e8444e69baa8c5", "parents": [ "fd4c7f2fce1737105208c564e1458c885918982d" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Mon Nov 26 16:14:34 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 14:55:33 2008 -0800" }, "message": "mac80211: adding 802.11n configuration flows\n\nThis patch configures the 802.11n mode of operation\ninternally in ieee80211_conf structure and in the low-level\ndriver as well (through op conf_ht).\nIt does not include AP configuration flows.\n\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "10816d40f2e9500057cb46d7608a362a1d10bb9b", "tree": "ad026a7a9c9ac9458e2895f16a1f21f32e6a4b80", "parents": [ "82b3cad942ebf1f64798e6ec3c46c277822e1fce" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Mon Nov 26 16:14:30 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 14:55:30 2008 -0800" }, "message": "mac80211: adding 802.11n HT framework definitions\n\nNew structures:\n - ieee80211_ht_info: describing STA\u0027s HT capabilities\n - ieee80211_ht_bss_info: describing BSS\u0027s HT characteristics\nChanged structures:\n - ieee80211_hw_mode: now also holds PHY HT capabilities for each HW mode\n - ieee80211_conf: ht_conf holds current self HT configuration\n ht_bss_conf holds current BSS HT configuration\n - flag IEEE80211_CONF_SUPPORT_HT_MODE added to indicate if HT use is\n desired\n - sta_info: now also holds Peer\u0027s HT capabilities\n\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e38bad4766a110b61fa6038f10be16ced8c6cc38", "tree": "8a1b3920dd5383c4a8312597c6d4570b22eae148", "parents": [ "76ee65bfaa1435320a72989a6413467ce446ae23" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Nov 28 10:55:32 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 14:55:28 2008 -0800" }, "message": "mac80211: make ieee80211_iterate_active_interfaces not need rtnl\n\nInterface iteration in mac80211 can be done without holding any\nlocks because I converted it to RCU. Initially, I thought this\nwouldn\u0027t be needed for ieee80211_iterate_active_interfaces but\nit\u0027s turning out that multi-BSS AP support can be much simpler\nin a driver if ieee80211_iterate_active_interfaces can be called\nwithout holding locks. This converts it to use RCU, it adds a\nrequirement that the callback it invokes cannot sleep.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "dabeb344f54ab780d152714c18f1cb6b21c471a1", "tree": "b93be2a461b00882491bc8b7d3780476ca71bf7e", "parents": [ "9859a79023d71dd4e56c195a345abc4112abfd02" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Nov 09 01:57:29 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 14:54:37 2008 -0800" }, "message": "mac80211: provide interface iterator for drivers\n\nSometimes drivers need to know which interfaces are associated with\ntheir hardware. Rather than forcing those drivers to keep track of\nthe interfaces that were added, this adds an iteration function to\nmac80211.\n\nAs it is intended to be used from the interface add/remove callbacks,\nthe iteration function may currently only be called under RTNL.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "56db6c52bb61509c114b9f1b1eecc7461229770a", "tree": "9c36796c327a782e5a1db8e5dc33565e7b52fa87", "parents": [ "8636bf6513d8eae228c049adeac29fe6cd0739f1" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Oct 30 15:58:18 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sat Nov 10 22:01:15 2007 -0800" }, "message": "mac80211: remove unused driver ops\n\nThe driver operations set_ieee8021x(), set_port_auth() and\nset_privacy_invoked() are not used by any drivers, except\nset_privacy_invoked() they aren\u0027t even used by mac80211.\nRemove them at least until we need to support drivers with\nmac80211 that require getting this information.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Michael Wu \u003cflamingice@sourmilk.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "830f903866a1611e9ce53f3e35202302bb938946", "tree": "c1e6d73661aedd19bb3ef356fa14685389bfb082", "parents": [ "999acd9c339a761a18d625b13001612ac396ee00" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Oct 28 14:51:05 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sat Nov 10 21:59:54 2007 -0800" }, "message": "mac80211: allow driver to ask for a rate control algorithm\n\nThis allows a driver to ask for a specific rate control algorithm.\nThe rate control algorithm asked for must be registered and be\navailable as a module or built-in.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5ecc2a5d3e3c39535d2cc10dad15853e9e9b072d", "tree": "fd2efdb71863b6a7c0c8106477d7df7a5a8fb2e0", "parents": [ "478f8d2ba56b40ad1c17e21c1503669b83c96e8e" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Tue Oct 02 12:17:56 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:54:21 2007 -0700" }, "message": "[MAC80211]: Update beacon_update callback documentation\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "478f8d2ba56b40ad1c17e21c1503669b83c96e8e", "tree": "899c01c91848a8927d6f296f7cf7ad0a265e43ce", "parents": [ "42613db7605a68a70f97513137392bda9b27bb9e" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Sun Sep 30 13:52:37 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:54:21 2007 -0700" }, "message": "[MAC80211]: add sta_notify callback\n\nThis patch adds sta_notify callback and removes sta_table_notification\nwhich was not used by any driver.\nsta_notify() is essential for drivers that keeps notion of station\ninternally and need to be notified about removal or addition of a station\nto the (I)BSS or assocation to an AP.\n\nThis version adds interface id to the parameter list\nas suggested by Johannes Berg\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "47f0c502209056da728e6a306a43d5e19a37f4fa", "tree": "db62b1f47c0c37f8c5e7943a1410737721803614", "parents": [ "ddd3d2be85e3207c47f2b3c431723e6c758b4b0d" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Thu Sep 27 15:10:44 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:54:20 2007 -0700" }, "message": "[MAC80211]: Add association LED trigger\n\nMany devices have LEDs to indicate the link status.\nExport this functionality to drivers.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "628a140ba033ef201706a8c7e767c8a0c0f8326c", "tree": "7aae1dbc152bf9180fee3d238f224c2f4b1741b5", "parents": [ "640845a5632390eaa9357cd818646c8f0ee3d47e" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Sep 26 17:53:17 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:54:18 2007 -0700" }, "message": "[MAC80211]: remove ALG_NONE\n\nThis \"algorithm\" is used only internally and is not useful.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Michael Buesch \u003cmb@bu3sch.de\u003e\nAcked-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f9d540ee5f7e480339911df8d7389ef4c435ab54", "tree": "89381e4aa0f8ea31662dc21e890c339d715f8271", "parents": [ "a28975525016ddcbdaab8225666df1cf2dc9cb2d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Sep 28 14:02:09 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:54:15 2007 -0700" }, "message": "[MAC80211]: remove management interface\n\nRemoves the management interface since it is only required\nfor hostapd/userspace MLME, will not be in the final tree\nat least in this form and hostapd/userspace MLME currently\ndo not work against this tree anyway.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a28975525016ddcbdaab8225666df1cf2dc9cb2d", "tree": "5043b4c24c3c6c40d3d844259e2c47421204436d", "parents": [ "f7c4daed99fba15e4e48df464031f4ac7c32e4c9" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Sep 28 14:01:25 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:54:15 2007 -0700" }, "message": "[MAC80211]: add \"invalid\" interface type\n\nSince I cannot convince the lazy driver authors (hello Michael)\nto stop (ab)using the MGMT interface type internally in their\ndrivers, this patch introduces a new _INVALID type especially\nfor their use and changes all affected drivers to use it.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b4010e08907bdafe8bf4a3fe7ef9b52ddec4dda5", "tree": "10651fb231ff00dac4735d14079e8e241d44c6ce", "parents": [ "51617f0b76389b29740aa9d7736df99b75d1d9ec" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Sep 26 15:19:50 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:53:17 2007 -0700" }, "message": "[PATCH] mac80211: remove generic IE for AP interfaces\n\nThis is not useful since we do not support probe response\noffload to hardware at this time and beacons are set in\nanother way.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea49c359f36d5b40bf033c45a08332cb73777aa2", "tree": "07d99bbaca451af42d633e63c9c0c20d4f2d6f79", "parents": [ "f97df02e23269c7650869f6192e809f8ac1a4b39" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Sep 18 17:29:21 2007 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:53:00 2007 -0700" }, "message": "[PATCH] mac80211: remove crypto algorithm typedef\n\nThe typedef is not required, we can just use \"enum ieee80211_key_alg\"\ninstead of \"ieee80211_key_alg\"\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Michael Wu \u003cflamingice@sourmilk.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f97df02e23269c7650869f6192e809f8ac1a4b39", "tree": "ec94bcf660ff34c51562ac285d2b6fac38cc9059", "parents": [ "75a5f0ccfdbc0151ee40bb742f7b5c8eba493c0e" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Sep 18 17:29:20 2007 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:52:59 2007 -0700" }, "message": "[PATCH] wireless networking: move frame inline functions to generic header\n\nThese inlines are generally useful, not just with mac80211.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Michael Wu \u003cflamingice@sourmilk.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "75a5f0ccfdbc0151ee40bb742f7b5c8eba493c0e", "tree": "f82e329ec030e767d65b767914fd501c955de4f9", "parents": [ "1bc0826c8f5f3fa26644a8e878aae0be304a670f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Sep 18 17:29:20 2007 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:52:59 2007 -0700" }, "message": "[PATCH] mac80211: document a lot more\n\nThis patch adds a lot more documentation (in kernel-doc format)\nto include/net/mac80211.h\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Michael Wu \u003cflamingice@sourmilk.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1bc0826c8f5f3fa26644a8e878aae0be304a670f", "tree": "aed4da1516bd0f3bc17ecd940870a96f3d33e936", "parents": [ "0ec3ca445931ff0e7ad6ac61d6c5d2aaafe7a9f5" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Sep 18 17:29:15 2007 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:52:58 2007 -0700" }, "message": "[PATCH] mac80211: renumber and document the hardware flags\n\nCurrently, hardware flags that drivers must set are not\ndocumented well enough. Fix this.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Michael Wu \u003cflamingice@sourmilk.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0ec3ca445931ff0e7ad6ac61d6c5d2aaafe7a9f5", "tree": "a9e5fab14a3f928df6536a913ca8aba5e0ab2632", "parents": [ "4150c57212ad134765dd78c654a4b9906252b66d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Sep 17 01:29:24 2007 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:52:57 2007 -0700" }, "message": "[PATCH] mac80211: validate VLAN interfaces better\n\nThis patch changes mac80211 to verify that VLAN interfaces\nare valid and not bother drivers about them any more.\nVLAN interfaces are now only valid when an AP interface\nis up with the same MAC address, and are automatically\nturned off when the AP interface is set down.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: Michael Wu \u003cflamingice@sourmilk.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4150c57212ad134765dd78c654a4b9906252b66d", "tree": "c37ab7a3f75532a623ed00339782d769514422d2", "parents": [ "070ac3a2651e3c1c4d277c5f1981517427c386a7" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Sep 17 01:29:23 2007 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:52:57 2007 -0700" }, "message": "[PATCH] mac80211: revamp interface and filter configuration\n\nDrivers are currently supposed to keep track of monitor\ninterfaces if they allow so-called \"hard\" monitor, and\nthey are also supposed to keep track of multicast etc.\n\nThis patch changes that, replaces the set_multicast_list()\ncallback with a new configure_filter() callback that takes\nfilter flags (FIF_*) instead of interface flags (IFF_*).\nFor a driver, this means it should open the filter as much\nas necessary to get all frames requested by the filter flags.\nAccordingly, the filter flags are named \"positively\", e.g.\nFIF_ALLMULTI.\n\nMulticast filtering is a bit special in that drivers that\nhave no multicast address filters need to allow multicast\nframes through when either the FIF_ALLMULTI flag is set or\nwhen the mc_count value is positive.\n\nAt the same time, drivers are no longer notified about\nmonitor interfaces at all, this means they now need to\nimplement the start() and stop() callbacks and the new\nchange_filter_flags() callback. Also, the start()/stop()\nordering changed, start() is now called *before* any\nadd_interface() as it really should be, and stop() after\nany remove_interface().\n\nThe patch also changes the behaviour of setting the bssid\nto multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING\nis set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed\nand the filter flag FIF_BCN_PRBRESP_PROMISC introduced.\nThis is a lot more efficient for hardware like b43 that\nsupports it and other hardware can still set the BSSID\nto all-ones.\n\nDriver modifications by Johannes Berg (b43 \u0026 iwlwifi), Michael Wu\n(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and\nIvo van Doorn (rt2x00).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Michael Wu \u003cflamingice@sourmilk.net\u003e\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9c7d7728baf79c63ae58df95fb39ea13db487599", "tree": "204c7747ba15fa1917665dda854e051c2d164dca", "parents": [ "693d454dffd43b2bab021d0e039a0c426181c1b0" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Sep 18 17:29:20 2007 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:52:31 2007 -0700" }, "message": "[MAC80211]: remove tx info sw_retry_attempt member\n\nThis is unused.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Michael Wu \u003cflamingice@sourmilk.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" } ], "next": "6b301cdfad96daa3cf4f0d775ab408f898308890" }