)]}'
{
  "log": [
    {
      "commit": "ea59830db01b6b3d6bda9f84e3d272a346115e8e",
      "tree": "85fe1044ae7aad2ef75c3afcbe7db388a8d92957",
      "parents": [
        "de591dacf3034977b3fb94b61d08240c8b35c39d"
      ],
      "author": {
        "name": "Josef \u0027Jeff\u0027 Sipek",
        "email": "jeffpc@josefsipek.net",
        "time": "Sat Sep 16 21:09:29 2006 -0400"
      },
      "committer": {
        "name": "David Woodhouse",
        "email": "dwmw2@infradead.org",
        "time": "Sun Sep 17 17:04:23 2006 +0100"
      },
      "message": "[MTD] Use SEEK_{SET,CUR,END} instead of hardcoded values in mtdchar lseek()\n\nSigned-off-by: Josef \u0027Jeff\u0027 Sipek \u003cjeffpc@josefsipek.net\u003e\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\n"
    },
    {
      "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7",
      "tree": "6d98881fe91fd9583c109208d5c27131b93fa248",
      "parents": [
        "e02169b682bc448ccdc819dc8639ed34a23cedd8"
      ],
      "author": {
        "name": "Jörn Engel",
        "email": "joern@wohnheim.fh-wedel.de",
        "time": "Fri Jun 30 19:25:36 2006 +0200"
      },
      "committer": {
        "name": "Adrian Bunk",
        "email": "bunk@stusta.de",
        "time": "Fri Jun 30 19:25:36 2006 +0200"
      },
      "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n"
    },
    {
      "commit": "1887f517e3cdf5f1e9c0e4daaa864450415a8f61",
      "tree": "1f86e7ef7c98283e451ad053c321bea551224cb6",
      "parents": [
        "0e4ced59de7c0c23588d2b3f6d302592545cd12e"
      ],
      "author": {
        "name": "Herbert Valerio Riedel",
        "email": "hvr@gnu.org",
        "time": "Sat Jun 24 00:03:36 2006 +0200"
      },
      "committer": {
        "name": "David Woodhouse",
        "email": "dwmw2@infradead.org",
        "time": "Tue Jun 27 23:22:07 2006 +0100"
      },
      "message": "[MTD] CORE mtdchar.c: fix off-by-one error in lseek()\n\nAllow lseek(mtdchar_fd, 0, SEEK_END) to succeed, which currently fails\nwith EINVAL.\n\nlseek(fd, 0, SEEK_END) should result into the same fileposition as\nlseek(fd, 0, SEEK_SET) + read(fd, buf, length(fd))\n\nFurthermore, lseek(fd, 0, SEEK_CUR) should return the current file position,\nwhich in case of an encountered EOF should not result in EINVAL\n\nSigned-off-by: Herbert Valerio Riedel \u003chvr@gnu.org\u003e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\n"
    },
    {
      "commit": "7bc3312bef4d6f220812500c0de7868fb7625a41",
      "tree": "9ad49e850cdfe9868a19a37681bbf4d403e47ed3",
      "parents": [
        "7e4178f90eec862affc97469118d5008bd1b5bda"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Tue Jun 20 20:05:05 2006 +0200"
      },
      "committer": {
        "name": "David Woodhouse",
        "email": "dwmw2@infradead.org",
        "time": "Tue Jun 20 20:31:24 2006 +0100"
      },
      "message": "[MTD] NAND: Fix breakage all over the place\n\nFollowing problems are addressed:\n\n- wrong status caused early break out of nand_wait()\n- removed the bogus status check in nand_wait() which\n  is a relict of the abandoned support for interrupted\n  erase.\n- status check moved to the correct place in read_oob\n- oob support for syndrom based ecc with strange layouts\n- use given offset in the AUTOOOB based oob operations\n\nPartially based on a patch from Vitaly Vool \u003cvwool@ru.mvista.com\u003e\nThanks to Savin Zlobec \u003csavin@epico.si\u003e for tracking down the\nstatus problem.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "73c619ea0e49c9306afa7ea53c3362fbc56ffd70",
      "tree": "d71189bae015f56bf72e7421d4cf1a307b3c1fb8",
      "parents": [
        "92cbfdcc3661d7670b01b92b89811cd3a2412297"
      ],
      "author": {
        "name": "Joern Engel",
        "email": "joern@wh.fh-wedel.de",
        "time": "Tue May 30 14:25:35 2006 +0200"
      },
      "committer": {
        "name": "Joern Engel",
        "email": "joern@wh.fh-wedel.de",
        "time": "Tue May 30 14:25:35 2006 +0200"
      },
      "message": "[MTD] Disconnect struct mtd_info from ABI\n\nmtdchar.c direcly copied part of struct mtd_info to userspace, thereby\nimplicitly making it part of the ABI.  With this patch, struct\nmtd_info is independent of the ABI and can have its fields removed,\nreordered, etc.\n\nSigned-off-by: Joern Engel \u003cjoern@wh.fh-wedel.de\u003e\n"
    },
    {
      "commit": "f1a28c02843efcfcc41982149880bac3ac180234",
      "tree": "b15ca1a140e463ef3cde6b9a8591e7be172ee1f1",
      "parents": [
        "9a1fcdfd4bee27c418424cac47abf7c049541297"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Tue May 30 00:37:34 2006 +0200"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Tue May 30 00:37:34 2006 +0200"
      },
      "message": "[MTD] NAND Expose the new raw mode function and status info to userspace\n\nThe raw read/write access to NAND (without ECC) has been changed in the\nNAND rework. Expose the new way - setting the file mode via ioctl - to\nuserspace. Also allow to read out the ecc statistics information so userspace\ntools can see that bitflips happened and whether errors where correctable\nor not. Also expose the number of bad blocks for the partition, so nandwrite\ncan check if the data fits into the parition before writing to it.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "9a1fcdfd4bee27c418424cac47abf7c049541297",
      "tree": "5baa5f1e1d1a296a319bf6a5a4b636668c107e00",
      "parents": [
        "8593fbc68b0df1168995de76d1af38eb62fd6b62"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Mon May 29 14:56:39 2006 +0200"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Mon May 29 15:06:51 2006 +0200"
      },
      "message": "[MTD] NAND Signal that a bitflip was corrected by ECC\n\nReturn -EUCLEAN on read when a bitflip was detected and corrected, so the\nclients can react and eventually copy the affected block to a spare one.\nMake all in kernel users aware of the change.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "8593fbc68b0df1168995de76d1af38eb62fd6b62",
      "tree": "dd244def53d2be4f1fbff9f74eac404fab8e240f",
      "parents": [
        "f4a43cfcecfcaeeaa40a9dbc1d1378298c22446e"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Mon May 29 03:26:58 2006 +0200"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Mon May 29 15:06:51 2006 +0200"
      },
      "message": "[MTD] Rework the out of band handling completely\n\nHopefully the last iteration on this!\n\nThe handling of out of band data on NAND was accompanied by tons of fruitless\ndiscussions and halfarsed patches to make it work for a particular\nproblem. Sufficiently annoyed by I all those \"I know it better\" mails and the\nresonable amount of discarded \"it solves my problem\" patches, I finally decided\nto go for the big rework. After removing the _ecc variants of mtd read/write\nfunctions the solution to satisfy the various requirements was to refactor the\nread/write _oob functions in mtd.\n\nThe major change is that read/write_oob now takes a pointer to an operation\ndescriptor structure \"struct mtd_oob_ops\".instead of having a function with at\nleast seven arguments.\n\nread/write_oob which should probably renamed to a more descriptive name, can do\nthe following tasks:\n\n- read/write out of band data\n- read/write data content and out of band data\n- read/write raw data content and out of band data (ecc disabled)\n\nstruct mtd_oob_ops has a mode field, which determines the oob handling mode.\n\nAside of the MTD_OOB_RAW mode, which is intended to be especially for\ndiagnostic purposes and some internal functions e.g. bad block table creation,\nthe other two modes are for mtd clients:\n\nMTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is\ndescribed by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It\u0027s\nup to the caller to make sure that the byte positions are not used by the ECC\nplacement algorithms.\n\nMTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in\nthe out of band area which are described by the oobfree tuples in the ecclayout\ndata structre which is associated to the devicee.\n\nThe decision whether data plus oob or oob only handling is done depends on the\nsetting of the datbuf member of the data structure. When datbuf \u003d\u003d NULL then\nthe internal read/write_oob functions are selected, otherwise the read/write\ndata routines are invoked.\n\nTested on a few platforms with all variants. Please be aware of possible\nregressions for your particular device / application scenario\n\nDisclaimer: Any whining will be ignored from those who just contributed \"hot\nair blurb\" and never sat down to tackle the underlying problem of the mess in\nthe NAND driver grown over time and the big chunk of work to fix up the\nexisting users. The problem was not the holiness of the existing MTD\ninterfaces. The problems was the lack of time to go for the big overhaul. It\u0027s\neasy to add more mess to the existing one, but it takes alot of effort to go\nfor a real solution.\n\nImprovements and bugfixes are welcome!\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "f4a43cfcecfcaeeaa40a9dbc1d1378298c22446e",
      "tree": "5647ebccb720c9d8ca314c8a3a5f6a660d000019",
      "parents": [
        "5bd34c091a044d130601370c370f84b1c59f1627"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Sun May 28 11:01:53 2006 +0200"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Mon May 29 15:06:50 2006 +0200"
      },
      "message": "[MTD] Remove silly MTD_WRITE/READ macros\n\nMost of those macros are unused and the used ones just obfuscate\nthe code. Remove them and fixup all users.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "5bd34c091a044d130601370c370f84b1c59f1627",
      "tree": "8b08012a9a30186a8805d506f8438e2944f5f31b",
      "parents": [
        "ff268fb8791cf18df536113355d7184007c269d9"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Sat May 27 22:16:10 2006 +0200"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Mon May 29 15:06:50 2006 +0200"
      },
      "message": "[MTD] NAND Replace oobinfo by ecclayout\n\nThe nand_oobinfo structure is not fitting the newer error correction\ndemands anymore. Replace it by struct nand_ecclayout and fixup the users\nall over the place. Keep the nand_oobinfo based ioctl for user space\ncompability reasons.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "ff268fb8791cf18df536113355d7184007c269d9",
      "tree": "3a7d9fc72b28f5a0f11a2f8b08174b1bee6ea20d",
      "parents": [
        "8be834f76291fdcc0614cb84926c6910b9f2ecbc"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Sat May 27 20:36:12 2006 +0200"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@cruncher.tec.linutronix.de",
        "time": "Mon May 29 15:06:49 2006 +0200"
      },
      "message": "[MTD] NAND Consolidate oobinfo handling\n\nThe info structure for out of band data was copied into\nthe mtd structure. Make it a pointer and remove the ability\nto set it from userspace. The position of ecc bytes is\ndefined by the hardware and should not be changed by software.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "493c646077ef0b8668ed71b8057f81cb7454af87",
      "tree": "e05992a8d8c9ba911e5a9809dc0678ca50e96c76",
      "parents": [
        "3cecf69ecde22199699c4f0e609dfed2a487b674"
      ],
      "author": {
        "name": "Kyungmin Park",
        "email": "kyungmin.park@samsung.com",
        "time": "Fri May 12 17:03:07 2006 +0300"
      },
      "committer": {
        "name": "Jarkko Lavinen",
        "email": "lavinen@pentafluge.infradead.org",
        "time": "Fri May 12 15:35:50 2006 +0100"
      },
      "message": "OneNAND: One-Time Programmable (OTP) support\n\nOne Block of the NAND Flash Array memory is reserved as\na One-Time Programmable Block memory area.\nAlso, 1st Block of NAND Flash Array can be used as OTP.\n\nThe OTP block can be read, programmed and locked using the same\noperations as any other NAND Flash Array memory block.\nOTP block cannot be erased.\n\nOTP block is fully-guaranteed to be a valid block.\n\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\n"
    },
    {
      "commit": "b802c0741103aa92251d536c115874d51f802ec8",
      "tree": "cf2cb539e68b224ad06b4a43350454b847543381",
      "parents": [
        "cd2866faaa0efd9af18fe4a86d129cbd99240796"
      ],
      "author": {
        "name": "Thago Galesi",
        "email": "thiagogalesi@gmail.com",
        "time": "Mon Apr 17 17:38:15 2006 +0100"
      },
      "committer": {
        "name": "David Woodhouse",
        "email": "dwmw2@infradead.org",
        "time": "Mon Apr 17 17:38:15 2006 +0100"
      },
      "message": "[PATCH] Remove unnecessary kmalloc/kfree calls in mtdchar\n\nThis patch removes repeated calls to kmalloc / kfree in mtd_write /\nmtd_read functions, replacing them by a single kmalloc / kfree pair.\n\nSigned-off-by: Thiago Galesi \u003cthiagogalesi@gmail.com\u003e\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\n"
    },
    {
      "commit": "97894cda5773e59bd13e87b72077751099419a9f",
      "tree": "9a039ab8c122ae9a4f64d285e2da0efd1356789e",
      "parents": [
        "b95f9609c761a14d1e7be1a89f2a66399b5ae343"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@linutronix.de",
        "time": "Mon Nov 07 11:15:26 2005 +0000"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Mon Nov 07 13:37:38 2005 +0100"
      },
      "message": "[MTD] core: Clean up trailing white spaces\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "15fdc52f35b853e3fa550087987b5ee4ffbd199b",
      "tree": "000d8934d1e68cbee764d402de00a69a34ff93ea",
      "parents": [
        "9090ed0b82f817bde471bdbb2e73278ab75f5fd3"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Mon Nov 07 00:14:42 2005 +0100"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Mon Nov 07 00:14:42 2005 +0100"
      },
      "message": "[MTD] Tidy up Tims include cleanup\n\nWhile we are at it, reorder the includes and\nremove the silly /* TASK */ comment\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "2fc2991175bf77395e6b15fe6b2304d3bf72da40",
      "tree": "b0ff38c09240e7c00e1577d447ebe89143d752dc",
      "parents": [
        "8b491d750885ebe8e7d385ce4186c85957d67123",
        "7015faa7df829876a0f931cd18aa6d7c24a1b581"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Sun Nov 06 15:36:37 2005 +0100"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Sun Nov 06 15:36:37 2005 +0100"
      },
      "message": "Merge branch \u0027master\u0027 of /home/tglx/work/mtd/git/linux-2.6.git/\n"
    },
    {
      "commit": "4e57b6817880946a3a78d5d8cad1ace363f7e449",
      "tree": "b6b5f3f9e8e52cc55d98239a4992e72e983c8fa4",
      "parents": [
        "b0423a0d9cc836b2c3d796623cd19236bfedfe63"
      ],
      "author": {
        "name": "Tim Schmielau",
        "email": "tim@physik3.uni-rostock.de",
        "time": "Sun Oct 30 15:03:48 2005 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Sun Oct 30 17:37:32 2005 -0800"
      },
      "message": "[PATCH] fix missing includes\n\nI recently picked up my older work to remove unnecessary #includes of\nsched.h, starting from a patch by Dave Jones to not include sched.h\nfrom module.h. This reduces the number of indirect includes of sched.h\nby ~300. Another ~400 pointless direct includes can be removed after\nthis disentangling (patch to follow later).\nHowever, quite a few indirect includes need to be fixed up for this.\n\nIn order to feed the patches through -mm with as little disturbance as\npossible, I\u0027ve split out the fixes I accumulated up to now (complete for\ni386 and x86_64, more archs to follow later) and post them before the real\npatch.  This way this large part of the patch is kept simple with only\nadding #includes, and all hunks are independent of each other.  So if any\nhunk rejects or gets in the way of other patches, just drop it.  My scripts\nwill pick it up again in the next round.\n\nSigned-off-by: Tim Schmielau \u003ctim@physik3.uni-rostock.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "53f4654272df7c51064825024340554b39c9efba",
      "tree": "e3e7b82a6bb0040ffbd267b250be2720704b98f2",
      "parents": [
        "51d172d5f3a193e4b8f76179b2e55d7a36b94117"
      ],
      "author": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Thu Oct 27 22:25:43 2005 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Oct 28 09:52:52 2005 -0700"
      },
      "message": "[PATCH] Driver Core: fix up all callers of class_device_create()\n\nThe previous patch adding the ability to nest struct class_device\nchanged the paramaters to the call class_device_create().  This patch\nfixes up all in-kernel users of the function.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "8b491d750885ebe8e7d385ce4186c85957d67123",
      "tree": "18c7eb52bfc8821eaf08430fdaa5ce70078f2200",
      "parents": [
        "1da2c9a638f8af7be3daf1fa8dbd087b3284d16e"
      ],
      "author": {
        "name": "Todd Poynor",
        "email": "tpoynor@mvista.com",
        "time": "Thu Aug 04 02:05:51 2005 +0100"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Thu Aug 04 12:52:40 2005 +0200"
      },
      "message": "[MTD] mtdchar: Return EINVAL for bad seeks instead of fixing up to valid byte\n\nmtdchar return -EINVAL for seek prior to offset 0 or to beyond the last\nbyte in the device/partition, similar to various other seek methods,\ninstead of fixing up to first or last byte.\n\nSigned-off-by: Todd Poynor \u003ctpoynor@mvista.com\u003e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "3a7a882420d378b59542a048075e40428c771a12",
      "tree": "98b157a507ee763a78d60af22c67bf818ef0ef2c",
      "parents": [
        "9bc7b38731dd1cc1635ab12f8de48866f603b06e"
      ],
      "author": {
        "name": "Coywolf Qi Hunt",
        "email": "coywolf@sosdg.org",
        "time": "Mon Jul 04 12:15:28 2005 -0500"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Mon Jul 04 20:49:54 2005 +0200"
      },
      "message": "[MTD] mtdchar: Return the real error code when create_class() failed\n\nSigned-off-by: Coywolf Qi Hunt \u003ccoywolf@sosdg.org\u003e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "9bc7b38731dd1cc1635ab12f8de48866f603b06e",
      "tree": "080932fb759f2f122ed81c88d15b336c025a2ff4",
      "parents": [
        "bd7bcf52dabba9c391142fd515221fcb87b7c712"
      ],
      "author": {
        "name": "Todd Poynor",
        "email": "tpoynor@mvista.com",
        "time": "Thu Jun 30 01:23:27 2005 +0100"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Fri Jul 01 11:05:46 2005 +0200"
      },
      "message": "[MTD] mtdchar.c: Replace DEVFS by udev\n\nSwitch from DEVFS to udev for dynamic creation of device nodes for mtd\nchar devices.\n\nCreates a new LDM class \"mtd\" with writeable and read-only devices\nregistered for each mtdchar device.\n\nFrom: Paolo Galtieri \u003cpgaltieri@mvista.com\u003e\nSigned-off-by: Todd Poynor \u003ctpoynor@mvista.com\u003e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "81dba488792b29cc8cb2b3d49407be05303dde16",
      "tree": "60838f712b06c3e8a6acf22df81992d8d26c139a",
      "parents": [
        "998cf6403cdaac74211c619772bea027274ffc42"
      ],
      "author": {
        "name": "Nicolas Pitre",
        "email": "nico@cam.org",
        "time": "Fri Apr 01 16:36:15 2005 +0100"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Mon May 23 13:07:33 2005 +0200"
      },
      "message": "[MTD] Reset file position when switching OTP mode\n\nSigned-off-by: Nicolas Pitre \u003cnico@cam.org\u003e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "045e9a5d51ced27bfcbdb78071534ce6fd36b33d",
      "tree": "d680484aae4d7ac238ab4a8c1c5cc5cd88e512df",
      "parents": [
        "31f4233baeaaeb7c563d2766781c6592ad259b6a"
      ],
      "author": {
        "name": "Nicolas Pitre",
        "email": "nico@cam.org",
        "time": "Tue Feb 08 19:12:53 2005 +0000"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Mon May 23 12:26:40 2005 +0200"
      },
      "message": "[MTD] Unabuse file-f_mode for OTP purpose\n\nSigned-off-by: Nicolas Pitre \u003cnico@cam.org\u003e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "31f4233baeaaeb7c563d2766781c6592ad259b6a",
      "tree": "475ffcfcc1fe91a47d6b8c413d8f25b3fdfcc1c0",
      "parents": [
        "f77814dd5728edaf1239d19755d2aa0d8c33d861"
      ],
      "author": {
        "name": "Nicolas Pitre",
        "email": "nico@cam.org",
        "time": "Tue Feb 08 17:45:55 2005 +0000"
      },
      "committer": {
        "name": "Thomas Gleixner",
        "email": "tglx@mtd.linutronix.de",
        "time": "Mon May 23 12:26:04 2005 +0200"
      },
      "message": "[MTD] User interface to Protection Registers\n\nThis is implemented using a ioctl to switch the MTD char device into\none of the different OTP \"modes\", at which point read/write/seek can\noperate on the selected OTP area.  Also some extra ioctls to query\nfor size and lock protection segments or groups.  Some example user\nspace utilities are provided.\n\nSigned-off-by: Nicolas Pitre \u003cnico@cam.org\u003e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}