)]}' { "log": [ { "commit": "b9bdcbba010c2e49c8f837ea7a49fe006b636f41", "tree": "030af2c964995a691d33aab19c8f07b04c5c3437", "parents": [ "652afc27b26859a0ea5f6db681d80b83d2c43cf8" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:22 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:22 2009 -0700" }, "message": "ioat: fix self test for multi-channel case\n\nIn the multiple device case we need to re-arm the completion and protect\nagainst concurrent self-tests. The printk from the test callback is\nremoved as it can arbitrarily delay completion of the test.\n\nCc: \u003cstable@kernel.org\u003e\nCc: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n" }, { "commit": "652afc27b26859a0ea5f6db681d80b83d2c43cf8", "tree": "fc314e981f67470ebca307548d4cd420da717298", "parents": [ "e2346677af86150c6083974585c131e8a2c3ddcc" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:22 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:22 2009 -0700" }, "message": "dmaengine: bump initcall level to arch_initcall\n\nThere are dmaengine users that would like to register dma devices at\nsubsys_initcall time to ensure channels are available by device_initcall\ntime.\n\nCc: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nCc: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n\n\n" }, { "commit": "e2346677af86150c6083974585c131e8a2c3ddcc", "tree": "2205b224c4e961ad59dc684fb4db835aaf9515a0", "parents": [ "864498aaa9fef69ee166da023d12413a7776342d" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:21 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:21 2009 -0700" }, "message": "dmaengine: advertise all channels on a device to dma_filter_fn\n\nAllow dma_filter_fn routines to disambiguate multiple channels on a device\nrather than assuming that all channels on a device are equal.\n\nCc: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nReported-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n\n\n" }, { "commit": "864498aaa9fef69ee166da023d12413a7776342d", "tree": "023d6bfc15ba192c1a92caab3ff7525a84e409fc", "parents": [ "41d5e59c1299f27983977bcfe3b360600996051c" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:21 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:21 2009 -0700" }, "message": "dmaengine: use idr for registering dma device numbers\n\nThis brings some predictability to dma device numbers, i.e. an rmmod/insmod\ncycle may now result in /sys/class/dma/dma0chan0 being restored rather than\n/sys/class/dma/dma1chan0 appearing.\n\nCc: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n\n\n" }, { "commit": "41d5e59c1299f27983977bcfe3b360600996051c", "tree": "f0e80b6fea3af04f266843af97f433198ad535c7", "parents": [ "4fac7fa57cf8001be259688468c825f836daf739" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:21 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:21 2009 -0700" }, "message": "dmaengine: add a release for dma class devices and dependent infrastructure\n\nResolves:\nWARNING: at drivers/base/core.c:122 device_release+0x4d/0x52()\nDevice \u0027dma0chan0\u0027 does not have a release() function, it is broken and must be fixed.\n\nThe dma_chan_dev object is introduced to gear-match sysfs kobject and\ndmaengine channel lifetimes. When a channel is removed access to the\nsysfs entries return -ENODEV until the kobject can be released.\n\nThe bulk of the change is updates to existing code to handle the extra\nlayer of indirection between a dma_chan and its struct device.\n\nReported-by: Alexander Beregalov \u003ca.beregalov@gmail.com\u003e\nAcked-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nCc: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n\n\n" }, { "commit": "4fac7fa57cf8001be259688468c825f836daf739", "tree": "e59ab78a86f0599416b6255569d41d2ecc0d5512", "parents": [ "630738b9a52bee40cba685f4ff43fbbc28f2e1ff" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:20 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:20 2009 -0700" }, "message": "ioat: do not perform removal actions at shutdown\n\nUnregistering services should only happen at \"remove\" time. This prevents\nthe device from being unregistered while dmaengine clients are still\nactive. Also, the comment on ioat_remove is stale since removal is prevented\nwhile a channel may be in use.\n\nReported-by: Alexander Beregalov \u003ca.beregalov@gmail.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "630738b9a52bee40cba685f4ff43fbbc28f2e1ff", "tree": "c90ac1fe356e6cdcfc332a2217246e0f319fcadc", "parents": [ "0d603f611d6515049fbceb0267ded43c33b95451" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:20 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:20 2009 -0700" }, "message": "iop-adma: enable module removal\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "0d603f611d6515049fbceb0267ded43c33b95451", "tree": "6d5468c0b0a07f100e9cbbb901fd840ebe91b89d", "parents": [ "f38822033d9eafd8a7b12dd7ad6dea26480ba339" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:20 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:20 2009 -0700" }, "message": "iop-adma: kill debug BUG_ON\n\nThis BUG_ON caught problems in early development but now it is in the\nway as it invalidly triggers when trying to remove the module.\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "f38822033d9eafd8a7b12dd7ad6dea26480ba339", "tree": "b8fb09a98b52a1519a038a9623928de59ec58e7f", "parents": [ "7dd602510128d7a64b11ff3b7d4f30ac8e3946ce" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:19 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:19 2009 -0700" }, "message": "iop-adma: let devm do its job, don\u0027t duplicate free\n\nNo need to free stuff that the devm infrastructure will take care of...\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "7dd602510128d7a64b11ff3b7d4f30ac8e3946ce", "tree": "6a87f942c72b0b02d24db7144cad435211178fcc", "parents": [ "f27c580c3628d79b17f38976d842a6d7f3616e2e" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:19 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:19 2009 -0700" }, "message": "dmaengine: kill enum dma_state_client\n\nDMA_NAK is now useless. We can just use a bool instead.\n\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "f27c580c3628d79b17f38976d842a6d7f3616e2e", "tree": "f1a1a96c1130e7e1c88f75cb5f5aab4c53fe0297", "parents": [ "aa1e6f1a385eb2b04171ec841f3b760091e4a8ee" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:18 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:18 2009 -0700" }, "message": "dmaengine: remove \u0027bigref\u0027 infrastructure\n\nReference counting is done at the module level so clients need not worry\nthat a channel will leave while they are actively using dmaengine.\n\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "aa1e6f1a385eb2b04171ec841f3b760091e4a8ee", "tree": "1401e7f1e867e5d4a769b648605e0317d25d5ccb", "parents": [ "209b84a88fe81341b4d8d465acc4a67cb7c3feb3" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:17 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:17 2009 -0700" }, "message": "dmaengine: kill struct dma_client and supporting infrastructure\n\nAll users have been converted to either the general-purpose allocator,\ndma_find_channel, or dma_request_channel.\n\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n\n\n" }, { "commit": "209b84a88fe81341b4d8d465acc4a67cb7c3feb3", "tree": "134632ed8c914f0ee497e7a22bc616d84e068119", "parents": [ "74465b4ff9ac1da503025c0a0042e023bfa6505c" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:17 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:17 2009 -0700" }, "message": "dmaengine: replace dma_async_client_register with dmaengine_get\n\nNow that clients no longer need to be notified of channel arrival\ndma_async_client_register can simply increment the dmaengine_ref_count.\n\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "74465b4ff9ac1da503025c0a0042e023bfa6505c", "tree": "ce63f4a4b055b65cae1edaddd334931bf512c76e", "parents": [ "33df8ca068123457db56c316946a3c0e4ef787d6" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:16 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:16 2009 -0700" }, "message": "atmel-mci: convert to dma_request_channel and down-level dma_slave\n\ndma_request_channel provides an exclusive channel, so we no longer need to\npass slave data through dmaengine.\n\nCc: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "33df8ca068123457db56c316946a3c0e4ef787d6", "tree": "e594340e903ea3eb8af83906c649eeaf85cbc0b2", "parents": [ "59b5ec21446b9239d706ab237fb261d525b75e81" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:15 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:15 2009 -0700" }, "message": "dmatest: convert to dma_request_channel\n\nReplace the client registration infrastructure with a custom loop to\npoll for channels. Once dma_request_channel returns NULL stop asking\nfor channels. A userspace side effect of this change if that loading\nthe dmatest module before loading a dma driver will result in no\nchannels being found, previously dmatest would get a callback. To\nfacilitate testing in the built-in case dmatest_init is marked as a\nlate_initcall. Another side effect is that channels under test can not\nbe used for any other purpose.\n\nCc: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "59b5ec21446b9239d706ab237fb261d525b75e81", "tree": "a437a354e84d311104829ca0e8b00b0ec8cb05c4", "parents": [ "f67b45999205164958de4ec0658d51fa4bee066d" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:15 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:15 2009 -0700" }, "message": "dmaengine: introduce dma_request_channel and private channels\n\nThis interface is primarily for device-to-memory clients which need to\nsearch for dma channels with platform-specific characteristics. The\nprototype is:\n\nstruct dma_chan *dma_request_channel(dma_cap_mask_t mask,\n dma_filter_fn filter_fn,\n void *filter_param);\n\nWhen the optional \u0027filter_fn\u0027 parameter is set to NULL\ndma_request_channel simply returns the first channel that satisfies the\ncapability mask. Otherwise, when the mask parameter is insufficient for\nspecifying the necessary channel, the filter_fn routine can be used to\ndisposition the available channels in the system. The filter_fn routine\nis called once for each free channel in the system. Upon seeing a\nsuitable channel filter_fn returns DMA_ACK which flags that channel to\nbe the return value from dma_request_channel. A channel allocated via\nthis interface is exclusive to the caller, until dma_release_channel()\nis called.\n\nTo ensure that all channels are not consumed by the general-purpose\nallocator the DMA_PRIVATE capability is provided to exclude a dma_device\nfrom general-purpose (memory-to-memory) consideration.\n\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n\n\n" }, { "commit": "2ba05622b8b143b0c95968ba59bddfbd6d2f2559", "tree": "b7b72d02a993ff2ba731d6608f4ab8ce87482bcb", "parents": [ "bec085134e446577a983f17f57d642a88d1af53b" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:14 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:14 2009 -0700" }, "message": "dmaengine: provide a common \u0027issue_pending_all\u0027 implementation\n\nasync_tx and net_dma each have open-coded versions of issue_pending_all,\nso provide a common routine in dmaengine.\n\nThe implementation needs to walk the global device list, so implement\nrcu to allow dma_issue_pending_all to run lockless. Clients protect\nthemselves from channel removal events by holding a dmaengine reference.\n\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n\n" }, { "commit": "bec085134e446577a983f17f57d642a88d1af53b", "tree": "7d29afc53fedc72349ee78112fb71f68ff48ce24", "parents": [ "6f49a57aa5a0c6d4e4e27c85f7af6c83325a12d1" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:14 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:14 2009 -0700" }, "message": "dmaengine: centralize channel allocation, introduce dma_find_channel\n\nAllowing multiple clients to each define their own channel allocation\nscheme quickly leads to a pathological situation. For memory-to-memory\noffload all clients can share a central allocator.\n\nThis simply moves the existing async_tx allocator to dmaengine with\nminimal fixups:\n* async_tx.c:get_chan_ref_by_cap --\u003e dmaengine.c:nth_chan\n* async_tx.c:async_tx_rebalance --\u003e dmaengine.c:dma_channel_rebalance\n* split out common code from async_tx.c:__async_tx_find_channel --\u003e\n dma_find_channel\n\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n\n" }, { "commit": "6f49a57aa5a0c6d4e4e27c85f7af6c83325a12d1", "tree": "afba24357d1f4ff69ccb2b39a19542546590a50b", "parents": [ "07f2211e4fbce6990722d78c4f04225da9c0e9cf" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:14 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jan 06 11:38:14 2009 -0700" }, "message": "dmaengine: up-level reference counting to the module level\n\nSimply, if a client wants any dmaengine channel then prevent all dmaengine\nmodules from being removed. Once the clients are done re-enable module\nremoval.\n\nWhy?, beyond reducing complication:\n1/ Tracking reference counts per-transaction in an efficient manner, as\n is currently done, requires a complicated scheme to avoid cache-line\n bouncing effects.\n2/ Per-transaction ref-counting gives the false impression that a\n dma-driver can be gracefully removed ahead of its user (net, md, or\n dma-slave)\n3/ None of the in-tree dma-drivers talk to hot pluggable hardware, but\n if such an engine were built one day we still would not need to notify\n clients of remove events. The driver can simply return NULL to a\n -\u003eprep() request, something that is much easier for a client to handle.\n\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n\n" }, { "commit": "07f2211e4fbce6990722d78c4f04225da9c0e9cf", "tree": "51934e20a334e93c8c399d2e6375f264551e9bc3", "parents": [ "28405d8d9ce05f5bd869ef8b48da5086f9527d73" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Mon Jan 05 17:14:31 2009 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Mon Jan 05 18:10:19 2009 -0700" }, "message": "dmaengine: remove dependency on async_tx\n\nasync_tx.ko is a consumer of dma channels. A circular dependency arises\nif modules in drivers/dma rely on common code in async_tx.ko. It\nprevents either module from being unloaded.\n\nMove dma_wait_for_async_tx and async_tx_run_dependencies to dmaeninge.o\nwhere they should have been from the beginning.\n\nReviewed-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "a06d568f7c5e40e34ea64881842deb8f4382babf", "tree": "15b38b4652705b7c58bd89052c81ab91ca94cc4a", "parents": [ "b0b42b16ff2b90f17bc1a4308366c9beba4b276e" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Mon Dec 08 13:46:00 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Mon Dec 08 13:46:00 2008 -0700" }, "message": "async_xor: dma_map destination DMA_BIDIRECTIONAL\n\nMapping the destination multiple times is a misuse of the dma-api.\nSince the destination may be reused as a source, ensure that it is only\nmapped once and that it is mapped bidirectionally. This appears to add\nugliness on the unmap side in that it always reads back the destination\naddress from the descriptor, but gcc can determine that dma_unmap is a\nnop and not emit the code that calculates its arguments.\n\nCc: \u003cstable@kernel.org\u003e\nCc: Saeed Bishara \u003csaeed@marvell.com\u003e\nAcked-by: Yuri Tikhonov \u003cyur@emcraft.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "b0b42b16ff2b90f17bc1a4308366c9beba4b276e", "tree": "d9025b46fe5360300ae4e430df3246c67602adad", "parents": [ "532d3b1f86f41834a25373e3ded981d68e4ce17f" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Wed Dec 03 17:17:07 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Wed Dec 03 17:25:36 2008 -0700" }, "message": "dmaengine: protect \u0027id\u0027 from concurrent registrations\n\nThere is a possibility to have two devices registered with the same id.\n\nCc: \u003cstable@kernel.org\u003e\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n\n\n" }, { "commit": "532d3b1f86f41834a25373e3ded981d68e4ce17f", "tree": "ed025b991fe3efcee1b739faae534e26e20a2a4d", "parents": [ "4ffaf869c7780bbdfc11291e5fd4b61dde662b1c" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Wed Dec 03 17:16:55 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Wed Dec 03 17:16:55 2008 -0700" }, "message": "ioat: wait for self-test completion\n\nAs part of the ioat_dma self-test it performs a printk from a completion\ncallback. Depending on the system console configuration this output can\ntake longer than a millisecond causing the self-test to fail. Introduce a\ncompletion with a generous timeout to mitigate this failure.\n\nCc: \u003cstable@kernel.org\u003e\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "06190d8415219d9eef7d8f04b52a109e34575a76", "tree": "f7ac0ca156f5a2341c08417020ebbfc544b0c59b", "parents": [ "65e503814dec83c7b2ac955e75919d009109c919" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Tue Nov 11 13:12:33 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Nov 11 13:12:33 2008 -0700" }, "message": "dmaengine: struct device - replace bus_id with dev_name(), dev_set_name()\n\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "65e503814dec83c7b2ac955e75919d009109c919", "tree": "6cd01ca32ae269760d864d3c1bae94fdb0e95a45", "parents": [ "137cb55c6dcd56cb367285adaf15f808a2a9fec7" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Nov 11 13:12:33 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Nov 11 13:12:33 2008 -0700" }, "message": "iop-adma: use iop_paranoia() for debug BUG_ONs\n\nNow that the critical read back to flush the next descriptor address is\nfixed we can downgrade some BUG_ONs that need only be enabled when testing\nchanges to the driver.\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "137cb55c6dcd56cb367285adaf15f808a2a9fec7", "tree": "4828887b960a451d7ab09a4250b472a2a9f97884", "parents": [ "f21f237cf55494c3a4209de323281a3b0528da10" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Nov 11 13:12:33 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Nov 11 13:12:33 2008 -0700" }, "message": "iop-adma: add a dummy read to flush next descriptor update\n\nThe current dummy read references the wrong address allowing the next\ndescriptor address update to linger in the store buffer and get passed\nby an \u0027append\u0027 event.\n\nThis issue was uncovered by the change from strongly-ordered to device\nmemory for the adma registers.\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "12ccea24e309d815d058cdc6ee8bf2c4b85f0c5f", "tree": "70dae902b70b6025b21521a91f110e4a89d236a5", "parents": [ "c2c0b4c5434c0a25f7f7796b29155d53805909f5" ], "author": { "name": "Maciej Sosnowski", "email": "maciej.sosnowski@intel.com", "time": "Fri Nov 07 01:46:55 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 10 15:01:00 2008 -0800" }, "message": "[3/4] I/OAT: fix async_tx.callback checking\n\nasync_tx.callback should be checked for the first\nnot the last descriptor in the chain.\n\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c2c0b4c5434c0a25f7f7796b29155d53805909f5", "tree": "ea3fb7e114e06c346d95c94ed288fe8b1a8ac95e", "parents": [ "c3d4f44f50b65b0b0290e357f8739cfb3f4bcaca" ], "author": { "name": "Maciej Sosnowski", "email": "maciej.sosnowski@intel.com", "time": "Fri Nov 07 01:46:33 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 10 15:00:56 2008 -0800" }, "message": "[2/4] I/OAT: fix dma_pin_iovec_pages() error handling\n\nError handling needs to be modified in dma_pin_iovec_pages().\nIt should return NULL instead of ERR_PTR\n(pinned_list is checked for NULL in tcp_recvmsg() to determine\nif iovec pages have been successfully pinned down).\nIn case of error for the first iovec,\nlocal_list-\u003enr_iovecs needs to be initialized.\n\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c3d4f44f50b65b0b0290e357f8739cfb3f4bcaca", "tree": "ebc00379b3eeb562a1d810e3ca92ff37bd01bc37", "parents": [ "fd0fcf5c29dd0339c5f5d86eb2cbe9fdad5bcd73" ], "author": { "name": "Maciej Sosnowski", "email": "maciej.sosnowski@intel.com", "time": "Fri Nov 07 01:45:52 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 10 15:00:51 2008 -0800" }, "message": "[1/4] I/OAT: fix channel resources free for not allocated channels\n\nIf the ioatdma driver is loaded but not used it does not allocate descriptors.\nBefore it frees channel resources it should first be sure\nthat they have been previously allocated.\n\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nTested-by: Tom Picard \u003ctom.s.picard@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9fb3c5ca3dabe06758c35f790c68e273ed749e19", "tree": "874eb114b57c5b30152e66d601a8e67ed81ec606", "parents": [ "438f8de46bc261b35d84771ae9992cfff3ff4dd8", "f371be6352cdde3df2253b76acb979480e93ce4f" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sat Oct 25 04:07:44 2008 -0400" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sat Oct 25 04:07:44 2008 -0400" }, "message": "Merge branch \u0027i7300_idle\u0027 into release\n" }, { "commit": "f371be6352cdde3df2253b76acb979480e93ce4f", "tree": "835cf9fd3b947529de51ab1945fc4c02ba80e374", "parents": [ "33093e186c8f80b443fafb1d347a140bdd2b86c6" ], "author": { "name": "Venki Pallipadi", "email": "venkatesh.pallipadi@intel.com", "time": "Thu Oct 23 15:39:06 2008 -0700" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Oct 24 12:59:47 2008 -0400" }, "message": "i7300_idle: Fix compile warning CONFIG_I7300_IDLE_IOAT_CHANNEL not defined\n\nWhen I7300_idle driver is not configured, there is a compile time\nwarning about IDLE_IOAT_CHANNEL not defined. Fix it.\n\nReported-by: Suresh Siddha \u003csuresh.b.siddha@intel.com\u003e\nReported-by: Arjan van de Ven \u003carjan@linux.intel.com\u003e\nSigned-off-by: Venkatesh Pallipadi \u003cvenkatesh.pallipadi@intel.com\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "3ad0b02e4c1d5feba44b8ff48dccd1ba61a826b0", "tree": "b674d7e805f9f53b2550f81009b5a860e5a4fc47", "parents": [ "27471fdb32e77ecb92f09d4ac5757785b4dc33bc" ], "author": { "name": "Venki Pallipadi", "email": "venkatesh.pallipadi@intel.com", "time": "Wed Oct 22 16:34:52 2008 -0700" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Oct 24 12:54:18 2008 -0400" }, "message": "i7300_idle: Disable ioat channel only on platforms where ile driver can load\n\nBased on input from Andi Kleen:\nshare the platform detection code with ioat_dma and disable the channel in\ndma engine only for specific platforms.\n\nSigned-off-by: Venkatesh Pallipadi \u003cvenkatesh.pallipadi@intel.com\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "057316cc6a5b521b332a1d7ccc871cd60c904c74", "tree": "4333e608da237c73ff69b10878025cca96dcb4c8", "parents": [ "3e2dab9a1c2deb03c311eb3f83466009147ed4d3", "2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Wed Oct 22 23:57:26 2008 -0400" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Thu Oct 23 00:11:07 2008 -0400" }, "message": "Merge branch \u0027linus\u0027 into test\n\nConflicts:\n\tMAINTAINERS\n\tarch/x86/kernel/acpi/boot.c\n\tarch/x86/kernel/acpi/sleep.c\n\tdrivers/acpi/Kconfig\n\tdrivers/pnp/Makefile\n\tdrivers/pnp/quirks.c\n\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "27471fdb32e77ecb92f09d4ac5757785b4dc33bc", "tree": "2895d9918c019f48db32d479a2fc9f8725a3ed6e", "parents": [ "c7d87d79d14cecab7a34dedf1b133377cf5a0203" ], "author": { "name": "Andy Henroid", "email": "andrew.d.henroid@intel.com", "time": "Thu Oct 09 11:45:22 2008 -0700" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Tue Oct 21 23:58:41 2008 -0400" }, "message": "i7300_idle driver v1.55\n\nThe Intel 7300 Memory Controller supports dynamic throttling of memory which can\nbe used to save power when system is idle. This driver does the memory\nthrottling when all CPUs are idle on such a system.\n\nRefer to \"Intel 7300 Memory Controller Hub (MCH)\" datasheet\nfor the config space description.\n\nSigned-off-by: Andy Henroid \u003candrew.d.henroid@intel.com\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\nSigned-off-by: Venkatesh Pallipadi \u003cvenkatesh.pallipadi@intel.com\u003e\n" }, { "commit": "b91385236c00031c64b42b44db8068ad38a5ea11", "tree": "6336f60dad2f548f01125c7237fc239aed38b4fd", "parents": [ "d67ae206ef05198824c2a306c0c0edf2d2088920", "77cd62e8082b9743b59ee1946a4c3ee2e3cd2bce" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 20 12:54:30 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 20 12:54:30 2008 -0700" }, "message": "Merge branch \u0027next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx\n\n* \u0027next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:\n fsldma: allow Freescale Elo DMA driver to be compiled as a module\n fsldma: remove internal self-test from Freescale Elo DMA driver\n drivers/dma/dmatest.c: switch a GFP_ATOMIC to GFP_KERNEL\n dmatest: properly handle duplicate DMA channels\n drivers/dma/ioat_dma.c: drop code after return\n async_tx: make async_tx_run_dependencies() easier to read\n" }, { "commit": "7fe7b2f4ec14d6517078c5bc32b04301b468041c", "tree": "ded474f209ad27a57bef37c7064985b5a422c1f9", "parents": [ "09b05f5ee04cd2e2af3384d50646f53c76712f10" ], "author": { "name": "Haavard Skinnemoen", "email": "haavard.skinnemoen@atmel.com", "time": "Fri Oct 03 15:23:46 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 03 18:22:18 2008 -0700" }, "message": "dw_dmac: fix copy/paste bug in tasklet\n\nThe tasklet checks RAW.BLOCK twice, and does not check RAW.XFER. This is\nobviously wrong, and could theoretically cause the driver to hang.\n\nReported-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nSigned-off-by: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nAcked-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "77cd62e8082b9743b59ee1946a4c3ee2e3cd2bce", "tree": "8fe08914499988f47f51e74395522e5862b0c31d", "parents": [ "59f647c25a4f27c1e5c84710e0608b36303089f9" ], "author": { "name": "Timur Tabi", "email": "timur@freescale.com", "time": "Fri Sep 26 17:00:11 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Fri Sep 26 17:00:11 2008 -0700" }, "message": "fsldma: allow Freescale Elo DMA driver to be compiled as a module\n\nModify the Freescale Elo / Elo Plus DMA driver so that it can be compiled as\na module.\n\nThe primary change is to stop treating the DMA controller as a bus, and the\nDMA channels as devices on the bus. This is because the Open Firmware (OF)\nkernel code does not allow busses to be removed, so although we can call\nof_platform_bus_probe() to probe the DMA channels, there is no\nof_platform_bus_remove(). Instead, the DMA channels are manually probed,\nsimilar to what fsl_elbc_nand.c does.\n\nCc: Scott Wood \u003cscottwood@freescale.com\u003e\nAcked-by: Li Yang \u003cleoli@freescale.com\u003e\nSigned-off-by: Timur Tabi \u003ctimur@freescale.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "59f647c25a4f27c1e5c84710e0608b36303089f9", "tree": "654f611ff5b8ff98e7233e6a31ececd2af69b7bb", "parents": [ "6fdb8bd47111d3f94be221082b725ec2dec1d5c7" ], "author": { "name": "Timur Tabi", "email": "timur@freescale.com", "time": "Tue Sep 23 15:55:56 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Sep 23 15:55:56 2008 -0700" }, "message": "fsldma: remove internal self-test from Freescale Elo DMA driver\n\nThe Freescale Elo DMA driver runs an internal self-test before registering\nthe channels with the DMA engine. This self-test has a fundemental flaw in\nthat it calls the DMA engine\u0027s callback functions directly before the\nregistration. However, the registration initializes some variables that the\ncallback functions uses, namely the device struct.\n\nThe code works today because there are two device structs: the one created\nby the DMA engine, and one created by the Open Firmware (OF) subsystem. The\nself-test currently uses the device struct created by OF. However, in the\nfuture, some of the device structs created by OF will be eliminated.\nThis means that the self-test will only have access to the device struct\ncreated by the DMA engine. But this device struct isn\u0027t initialized when\nthe self-test runs, and this causes a kernel panic.\n\nSince there is already a DMA test module (dmatest), the internal self-test\ncode is not useful anyway. It is extremely unlikely that the test will fail\nin normal usage. It may have been helpful during development, but not any more.\n\nCc: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nCc: Li Yang \u003cleoli@freescale.com\u003e\nCc: Scott Wood \u003cscottwood@freescale.com\u003e\nSigned-off-by: Timur Tabi \u003ctimur@freescale.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "6fdb8bd47111d3f94be221082b725ec2dec1d5c7", "tree": "5a63f297bfa423f31c06e9d8d70c7efd6761a79a", "parents": [ "6b3141962dc82cfe1c30afdf91d564b309859cbe" ], "author": { "name": "Andrew Morton", "email": "akpm@linux-foundation.org", "time": "Fri Sep 19 04:16:23 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Fri Sep 19 04:16:23 2008 -0700" }, "message": "drivers/dma/dmatest.c: switch a GFP_ATOMIC to GFP_KERNEL\n\nIt was needlessly using the unreliable GFP_ATOMIC.\n\nCc: Timur Tabi \u003ctimur@freescale.com\u003e\nAcked-by: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "6b3141962dc82cfe1c30afdf91d564b309859cbe", "tree": "51a0045ba900f44083fbd2693824414262534dbc", "parents": [ "89f72a0633d1d4f28c4c5c8831ec814523d7671a" ], "author": { "name": "Timur Tabi", "email": "timur@freescale.com", "time": "Fri Sep 19 04:16:19 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Fri Sep 19 04:16:19 2008 -0700" }, "message": "dmatest: properly handle duplicate DMA channels\n\nUpdate the the dmatest driver so that it handles duplicate DMA channels\nproperly.\n\nWhen a DMA client is notified of an available DMA channel, it must check if it\nhas already allocated resources for that channel. If so, it should return\nDMA_DUP. This can happen, for example, if a DMA driver calls\ndma_async_device_register() more than once.\n\nAcked-by: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nSigned-off-by: Timur Tabi \u003ctimur@freescale.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "89f72a0633d1d4f28c4c5c8831ec814523d7671a", "tree": "ae8bb5e8d8e6f718bc54db245f17fe818543b0a7", "parents": [ "fdb0ac80618729e6b12121c66449b8532990eaf3" ], "author": { "name": "Julia Lawall", "email": "julia@diku.dk", "time": "Sat Sep 13 20:05:34 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Sat Sep 13 20:05:34 2008 -0700" }, "message": "drivers/dma/ioat_dma.c: drop code after return\n\nThe break after the return serves no purpose.\n\nSigned-off-by: Julia Lawall \u003cjulia@diku.dk\u003e\nReviewed-by: Richard Genoud \u003crichard.genoud@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "492c71dd545a54dc62df8780bd8d233d771748df", "tree": "73960c90dd47938000478b9b3b1228a8c860e65b", "parents": [ "f0af7245f1725fdc39b32b59c20500448437ddbe", "18365d181fe7fee8b52cd12482200d3a4c48d05e" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sat Aug 09 18:03:13 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat Aug 09 18:03:13 2008 +0100" }, "message": "Merge branch \u0027for-rmk\u0027 of git://git.marvell.com/orion\n" }, { "commit": "6f088f1d215be5250582b974f83f0e3aa6ad3a28", "tree": "f79585741cad29fa9fe9202bf830104815335758", "parents": [ "a09e64fbc0094e3073dbb09c3b4bfe4ab669244b" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@wantstofly.org", "time": "Sat Aug 09 13:44:58 2008 +0200" }, "committer": { "name": "Lennert Buytenhek", "email": "buytenh@marvell.com", "time": "Sat Aug 09 13:44:58 2008 +0200" }, "message": "[ARM] Move include/asm-arm/plat-orion to arch/arm/plat-orion/include/plat\n\nThis patch performs the equivalent include directory shuffle for\nplat-orion, and fixes up all users.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\n" }, { "commit": "49b75b87ce2dfbd99e59a50c3681b154d07e3a22", "tree": "f14e1da19a13d87a512f9043c2f37fd75dd122b3", "parents": [ "f1c7f79b6ab4f7ada002a0fae47f462ede6b6857", "097d9eb537ff4d88b74c3fe67392e27c478ca3c5" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 08 11:38:42 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 08 11:38:42 2008 -0700" }, "message": "Merge branch \u0027for-linus-merged\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027for-linus-merged\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm:\n [ARM] 5177/1: arm/mach-sa1100/Makefile: remove CONFIG_SA1100_USB\n [ARM] 5166/1: magician: add MAINTAINERS entry\n [ARM] fix pnx4008 build errors\n [ARM] Fix SMP booting with non-zero PHYS_OFFSET\n [ARM] 5185/1: Fix spi num_chipselect for lubbock\n [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach\n [ARM] Add support for arch/arm/mach-*/include and arch/arm/plat-*/include\n [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead\n [ARM] Eliminate useless includes of asm/mach-types.h\n [ARM] Fix circular include dependency with IRQ headers\n avr32: Use \u003cmach/foo.h\u003e instead of \u003casm/arch/foo.h\u003e\n avr32: Introduce arch/avr32/mach-*/include/mach\n avr32: Move include/asm-avr32 to arch/avr32/include/asm\n [ARM] sa1100_wdt: use reset_status to remember watchdog reset status\n [ARM] pxa: introduce reset_status and clear_reset_status for driver\u0027s usage\n [ARM] pxa: introduce reset.h for reset specific header information\n" }, { "commit": "7d283aee50351ec19eaf654a8690d77c4e1dff50", "tree": "8b0079f19db09ecd264cc2e8c428033fe725015f", "parents": [ "e6fce5b916cd7f7f79b2b3e53ba74bbfc1d7cf8b" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Aug 06 15:21:26 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 07 09:49:42 2008 -0400" }, "message": "list.h: Add list_splice_tail() and list_splice_tail_init()\n\nIf you are using linked lists for queues list_splice() will not do what\nyou would expect even if you use the elements passed reversed. We need\nto handle these differently. We add list_splice_tail() and\nlist_splice_tail_init().\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a09e64fbc0094e3073dbb09c3b4bfe4ab669244b", "tree": "69689f467179891b498bd7423fcf61925173db31", "parents": [ "a1b81a84fff05dbfef45b7012c26e1fee9973e5d" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Tue Aug 05 16:14:15 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Aug 07 09:55:48 2008 +0100" }, "message": "[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach\n\nThis just leaves include/asm-arm/plat-* to deal with.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "7f1b358a236ee9c19657a619ac6f2dcabcaa0924", "tree": "04eade38d4f8da94d7051f51875ed500b49b4756", "parents": [ "16a37acaaf4aaa631ba3f83710ed6cdb1a597520" ], "author": { "name": "Maciej Sosnowski", "email": "maciej.sosnowski@intel.com", "time": "Tue Jul 22 17:30:57 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 22 17:30:57 2008 -0700" }, "message": "I/OAT: I/OAT version 3.0 support\n\nThis patch adds to ioatdma and dca modules\nsupport for Intel I/OAT DMA engine ver.3 (aka CB3 device).\nThe main features of I/OAT ver.3 are:\n * 8 single channel DMA devices (8 channels total)\n * 8 DCA providers, each can accept 2 requesters\n * 8-bit TAG values and 32-bit extended APIC IDs\n\nSigned-off-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "16a37acaaf4aaa631ba3f83710ed6cdb1a597520", "tree": "5826c763c70dc6b798c0d12216a80f4596dec284", "parents": [ "09177e85d6a0bffac8b55afd28ed8b82bd873f0b" ], "author": { "name": "Maciej Sosnowski", "email": "maciej.sosnowski@intel.com", "time": "Tue Jul 22 17:30:57 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 22 17:30:57 2008 -0700" }, "message": "I/OAT: tcp_dma_copybreak default value dependent on I/OAT version\n\nI/OAT DMA performance tuning showed different optimal values of\ntcp_dma_copybreak for different I/OAT versions (4096 for 1.2 and 2048\nfor 2.0). This patch lets ioatdma driver set tcp_dma_copybreak value\naccording to these results.\n\n[dan.j.williams@intel.com: remove some ifdefs]\nSigned-off-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "09177e85d6a0bffac8b55afd28ed8b82bd873f0b", "tree": "ce3cb72509cc6c03bfc5d70a3ca0901a44b87fc0", "parents": [ "2a46fa13d788364c093c4296fe01cae837aa8919" ], "author": { "name": "Maciej Sosnowski", "email": "maciej.sosnowski@intel.com", "time": "Tue Jul 22 10:07:33 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 22 10:07:33 2008 -0700" }, "message": "I/OAT: Add watchdog/reset functionality to ioatdma\n\nDue to occasional DMA channel hangs observed for I/OAT versions 1.2 and 2.0\na watchdog has been introduced to check every 2 seconds\nif all channels progress normally.\nIf stuck channel is detected, driver resets it.\nThe reset is done in two parts. The second part is scheduled\nby the first one to reinitialize the channel after the restart.\n\nSigned-off-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "5eb907aaaf7a316a0097ff9f8c21bf9fc468a1f1", "tree": "33238b492dc0f823e59586ca2a2ec981c3ba9f74", "parents": [ "c7141d005a19d2a0a316b3bf9c170d3bedf07bfd" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Jul 17 17:59:56 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Jul 17 17:59:56 2008 -0700" }, "message": "iop_adma: document how to calculate the minimum descriptor pool size\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "c7141d005a19d2a0a316b3bf9c170d3bedf07bfd", "tree": "cac1072c6230a3c8f33213802f399a70fdc7e882", "parents": [ "0839875e0c197ded56bbae820e699f26d6fa2697" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Jul 17 17:59:56 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Jul 17 17:59:56 2008 -0700" }, "message": "iop_adma: directly reclaim descriptors on allocation failure\n\nForce callers that trigger an \"out of descriptors\" condition to run the\ncleanup loop directly. Alleviates the requirement to have soft-irqs\nenabled when polling for a descriptor in async_xor.\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "3bfb1d20b547a5071d01344581eac5846ea84491", "tree": "3cdbd3b5d59c93f257573cc894db2a000698f02b", "parents": [ "dc0ee6435cb92ccc81b14ff28d163fecc5a7f120" ], "author": { "name": "Haavard Skinnemoen", "email": "haavard.skinnemoen@atmel.com", "time": "Tue Jul 08 11:59:42 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:59:42 2008 -0700" }, "message": "dmaengine: Driver for the Synopsys DesignWare DMA controller\n\nThis adds a driver for the Synopsys DesignWare DMA controller (aka\nDMACA on AVR32 systems.) This DMA controller can be found integrated\non the AT32AP7000 chip and is primarily meant for peripheral DMA\ntransfer, but can also be used for memory-to-memory transfers.\n\nThis patch is based on a driver from David Brownell which was based on\nan older version of the DMA Engine framework. It also implements the\nproposed extensions to the DMA Engine API for slave DMA operations.\n\nThe dmatest client shows no problems, but there may still be room for\nimprovement performance-wise. DMA slave transfer performance is\ndefinitely \"good enough\"; reading 100 MiB from an SD card running at ~20\nMHz yields ~7.2 MiB/s average transfer rate.\n\nFull documentation for this controller can be found in the Synopsys\nDW AHB DMAC Databook:\n\nhttp://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf\n\nThe controller has lots of implementation options, so it\u0027s usually a\ngood idea to check the data sheet of the chip it\u0027s intergrated on as\nwell. The AT32AP7000 data sheet can be found here:\n\nhttp://www.atmel.com/dyn/products/datasheets.asp?family_id\u003d682\n\n\nChanges since v4:\n * Use client_count instead of dma_chan_is_in_use()\n * Add missing include\n * Unmap buffers unless client told us not to\n\nChanges since v3:\n * Update to latest DMA engine and DMA slave APIs\n * Embed the hw descriptor into the sw descriptor\n * Clean up and update MODULE_DESCRIPTION, copyright date, etc.\n\nChanges since v2:\n * Dequeue all pending transfers in terminate_all()\n * Rename dw_dmac.h -\u003e dw_dmac_regs.h\n * Define and use controller-specific dma_slave data\n * Fix up a few outdated comments\n * Define hardware registers as structs (doesn\u0027t generate better\n code, unfortunately, but it looks nicer.)\n * Get number of channels from platform_data instead of hardcoding it\n based on CONFIG_WHATEVER_CPU.\n * Give slave clients exclusive access to the channel\n\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e,\nSigned-off-by: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "dc0ee6435cb92ccc81b14ff28d163fecc5a7f120", "tree": "0a494946593f36516a997f64cb299d898cdf463f", "parents": [ "e1d181efb14a93cf263d6c588a5395518edf3294" ], "author": { "name": "Haavard Skinnemoen", "email": "haavard.skinnemoen@atmel.com", "time": "Tue Jul 08 11:59:35 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:59:35 2008 -0700" }, "message": "dmaengine: Add slave DMA interface\n\nThis patch adds the necessary interfaces to the DMA Engine framework\nto use functionality found on most embedded DMA controllers: DMA from\nand to I/O registers with hardware handshaking.\n\nIn this context, hardware hanshaking means that the peripheral that\nowns the I/O registers in question is able to tell the DMA controller\nwhen more data is available for reading, or when there is room for\nmore data to be written. This usually happens internally on the chip,\nbut these signals may also be exported outside the chip for things\nlike IDE DMA, etc.\n\nA new struct dma_slave is introduced. This contains information that\nthe DMA engine driver needs to set up slave transfers to and from a\nslave device. Most engines supporting DMA slave transfers will want to\nextend this structure with controller-specific parameters. This\nadditional information is usually passed from the platform/board code\nthrough the client driver.\n\nA \"slave\" pointer is added to the dma_client struct. This must point\nto a valid dma_slave structure iff the DMA_SLAVE capability is\nrequested. The DMA engine driver may use this information in its\ndevice_alloc_chan_resources hook to configure the DMA controller for\nslave transfers from and to the given slave device.\n\nA new operation for preparing slave DMA transfers is added to struct\ndma_device. This takes a scatterlist and returns a single descriptor\nrepresenting the whole transfer.\n\nAnother new operation for terminating all pending transfers is added as\nwell. The latter is needed because there may be errors outside the scope\nof the DMA Engine framework that may require DMA operations to be\nterminated prematurely.\n\nDMA Engine drivers may extend the dma_device, dma_chan and/or\ndma_slave_descriptor structures to allow controller-specific\noperations. The client driver can detect such extensions by looking at\nthe DMA Engine\u0027s struct device, or it can request a specific DMA\nEngine device by setting the dma_dev field in struct dma_slave.\n\ndmaslave interface changes since v4:\n * Fix checkpatch errors\n * Fix changelog (there are no slave descriptors anymore)\n\ndmaslave interface changes since v3:\n * Use dma_data_direction instead of a new enum\n * Submit slave transfers as scatterlists\n * Remove the DMA slave descriptor struct\n\ndmaslave interface changes since v2:\n * Add a dma_dev field to struct dma_slave. If set, the client can\n only be bound to the DMA controller that corresponds to this\n device. This allows controller-specific extensions of the\n dma_slave structure; if the device matches, the controller may\n safely assume its extensions are present.\n * Move reg_width into struct dma_slave as there are currently no\n users that need to be able to set the width on a per-transfer\n basis.\n\ndmaslave interface changes since v1:\n * Drop the set_direction and set_width descriptor hooks. Pass the\n direction and width to the prep function instead.\n * Declare a dma_slave struct with fixed information about a slave,\n i.e. register addresses, handshake interfaces and such.\n * Add pointer to a dma_slave struct to dma_client. Can be NULL if\n the DMA_SLAVE capability isn\u0027t requested.\n * Drop the set_slave device hook since the alloc_chan_resources hook\n now has enough information to set up the channel for slave\n transfers.\n\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "e1d181efb14a93cf263d6c588a5395518edf3294", "tree": "1792d1faa7e344401789bbcfad8102d0d93036e2", "parents": [ "848c536a37b8db4e461f14ca15fe29850151c822" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Fri Jul 04 00:13:40 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:59:12 2008 -0700" }, "message": "dmaengine: add DMA_COMPL_SKIP_{SRC,DEST}_UNMAP flags to control dma unmap\n\nIn some cases client code may need the dma-driver to skip the unmap of source\nand/or destination buffers. Setting these flags indicates to the driver to\nskip the unmap step. In this regard async_xor is currently broken in that it\nallows the destination buffer to be unmapped while an operation is still in\nprogress, i.e. when the number of sources exceeds the hardware channel\u0027s\nmaximum (fixed in a subsequent patch).\n\nAcked-by: Saeed Bishara \u003csaeed@marvell.com\u003e\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nAcked-by: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "848c536a37b8db4e461f14ca15fe29850151c822", "tree": "f4a88e92e31de28511e3a3de99200a77d2613dae", "parents": [ "4a776f0aa922a552460192c07b56f4fe9cd82632" ], "author": { "name": "Haavard Skinnemoen", "email": "haavard.skinnemoen@atmel.com", "time": "Tue Jul 08 11:58:58 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:58:58 2008 -0700" }, "message": "dmaengine: Add dma_client parameter to device_alloc_chan_resources\n\nA DMA controller capable of doing slave transfers may need to know a\nfew things about the slave when preparing the channel. We don\u0027t want\nto add this information to struct dma_channel since the channel hasn\u0027t\nyet been bound to a client at this point.\n\nInstead, pass a reference to the client requesting the channel to the\ndriver\u0027s device_alloc_chan_resources hook so that it can pick the\nnecessary information from the dma_client struct by itself.\n\n[dan.j.williams@intel.com: fixed up fsldma and mv_xor]\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "4a776f0aa922a552460192c07b56f4fe9cd82632", "tree": "ae6c2fef63e40fcdcac22483f3aa35eab95e64de", "parents": [ "ff7b04796d9866327ea76e1393f1e902ef032f84" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Tue Jul 08 11:58:45 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:58:45 2008 -0700" }, "message": "dmatest: Simple DMA memcpy test client\n\nThis client tests DMA memcpy using various lengths and various offsets\ninto the source and destination buffers. It will initialize both\nbuffers with a repeatable pattern and verify that the DMA engine copies\nthe requested region and nothing more. It will also verify that the\nbytes aren\u0027t swapped around, and that the source buffer isn\u0027t modified.\n\nThe dmatest module can be configured to test a specific device, a\nspecific channel. It can also test multiple channels at the same time,\nand it can start multiple threads competing for the same channel.\n\nChanges since v2:\n * Support testing multiple channels at the same time\n * Support testing with multiple threads competing for the same channel\n * Use counting test patterns in order to catch byte ordering issues\n\nChanges since v1:\n * Remove extra dashes around \"help\"\n * Remove \"default n\" from Kconfig\n * Turn TEST_BUF_SIZE into a module parameter\n * Return DMA_NAK instead of DMA_DUP\n * Print unhandled events\n * Support testing specific channels and devices\n * Move to the end of the Makefile\n\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "ff7b04796d9866327ea76e1393f1e902ef032f84", "tree": "42fd30c8e2051e7c6acc15da363960647030d3d3", "parents": [ "ebabe2762607147d28aa395ea6df2a0ee7f795a1" ], "author": { "name": "Saeed Bishara", "email": "saeed@marvell.com", "time": "Tue Jul 08 11:58:36 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:58:36 2008 -0700" }, "message": "dmaengine: DMA engine driver for Marvell XOR engine\n\nThe XOR engine found in Marvell\u0027s SoCs and system controllers\nprovides XOR and DMA operation, iSCSI CRC32C calculation, memory\ninitialization, and memory ECC error cleanup operation support.\n\nThis driver implements the DMA engine API and supports the following\ncapabilities:\n- memcpy\n- xor\n- memset\n\nThe XOR engine can be used by DMA engine clients implemented in the\nkernel, one of those clients is the RAID module. In that case, I\nobserved 20% improvement in the raid5 write throughput, and 40%\ndecrease in the CPU utilization when doing array construction, those\nresults obtained on an 5182 running at 500Mhz.\n\nWhen enabling the NET DMA client, the performance decreased, so\nmeanwhile it is recommended to keep this client off.\n\nSigned-off-by: Saeed Bishara \u003csaeed@marvell.com\u003e\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nSigned-off-by: Nicolas Pitre \u003cnico@marvell.com\u003e\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "ebabe2762607147d28aa395ea6df2a0ee7f795a1", "tree": "35b0292bb723a855846b0b1f7a20a6e14c77f1b4", "parents": [ "7cc5bf9a3a84e5a02e23e5739fb894790b37c101" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Tue Jul 08 11:58:28 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:58:28 2008 -0700" }, "message": "iop-adma: fix platform driver hotplug/coldplug\n\nSince 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform\nmodalias is prefixed with \"platform:\". Add MODULE_ALIAS() to most\nof the hotpluggable platform drivers, to re-enable auto loading.\n\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "7cc5bf9a3a84e5a02e23e5739fb894790b37c101", "tree": "b526b348ed1b64884bf672924540bb5dc29cb211", "parents": [ "9c402f4e196290692d998b188f9094deb1619e57" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:58:21 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:58:21 2008 -0700" }, "message": "dmaengine: track the number of clients using a channel\n\nHaavard\u0027s dma-slave interface would like to test for exclusive access to a\nchannel. The standard channel refcounting is not sufficient in that it\ntracks more than just client references, it is also inaccurate as reference\ncounts are percpu until the channel is removed.\n\nThis change also enables a future fix to deallocate resources when a client\ndeclines to use a capable channel.\n\nAcked-by: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "9c402f4e196290692d998b188f9094deb1619e57", "tree": "d61209d265890e20d8d2933e88fb58c8075454ac", "parents": [ "1099dc79245719c046e632212ec09d6ec1154ef5" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Fri Jun 27 01:21:11 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:58:12 2008 -0700" }, "message": "dmaengine: remove arch dependency from DMADEVICES\n\nThe dependency is redundant since all drivers set their specific arch\ndependencies. The NET_DMA option is modified to be enabled only on platforms\nwhere it is known to have a positive effect. HAS_DMA is added as an explicit\ndependency for the DMADEVICES menu.\n\nAcked-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nAcked-by: Haavard Skinnemoen \u003chaavard.skinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "1099dc79245719c046e632212ec09d6ec1154ef5", "tree": "e80912e5d819d131d51b6845d8aff03bd7f2b9f6", "parents": [ "65bc3ffe8c067e387fe5557bc3ea5071071f6af9" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Tue Jul 08 11:58:05 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:58:05 2008 -0700" }, "message": "dmaengine: Couple DMA channels to their physical DMA device\n\nSet the \u0027parent\u0027 field of channel class devices to point to the\nphysical DMA device initialized by the DMA engine driver.\n\nThis allows drivers to use chan-\u003edev.parent for syncing DMA buffers\nand adds a \u0027device\u0027 symlink to the real device in\n/sys/class/dma/dmaXchanY.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "51ee87f27a1d2c0e08492924f2fb0223c4c704d9", "tree": "4c2ede7b480144a1b20441c164761881c3df9f47", "parents": [ "0a2ce2ffc358da96792d514c1024b72c52be9cc1" ], "author": { "name": "Li Yang", "email": "leoli@freescale.com", "time": "Thu May 29 23:25:45 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Jul 08 11:57:45 2008 -0700" }, "message": "fsldma: fix incorrect exit path for initialization\n\nSigned-off-by: Li Yang \u003cleoli@freescale.com\u003e\nAcked-by: Zhang Wei \u003czw@zh-kernel.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "eccf2144e1232c33a8235033ffa079b6ebf92faf", "tree": "870dece32d3a26405f335884ffee0276d23f4a65", "parents": [ "76b0c788e6033c514f2a75171b04c73c68d28e8d" ], "author": { "name": "Christophe Jaillet", "email": "christophe.jaillet@wanadoo.fr", "time": "Tue May 20 16:33:06 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue May 20 13:51:20 2008 -0700" }, "message": "iop-adma: fixup some kzalloc/memset confusions\n\n1) Remove an explicit memset(.., 0, ...) to a variable allocated with\nkzalloc (i.e. \u0027dest\u0027).\n\n2) Allocate \u0027src\u0027 with kmalloc instead of kzalloc as all elements of the\n\u0027src\u0027 buffer are initialized in a \u0027for(...)\u0027 loop just after.\n\n3) remove useless \u0027sizeof(u8)\u0027, which always returns 1, when computing the\nsize of the memory to be allocated.\n\nSigned-off-by: Christophe Jaillet \u003cchristophe.jaillet@wanadoo.fr\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "8a5703f846e2363fc466aff3f53608340a1ae33f", "tree": "b229bba81473078275ff811254bf23f640f85e09", "parents": [ "218ff137bc67252694420563d23d051ab9227f17" ], "author": { "name": "Sebastian Siewior", "email": "bigeasy@tglx.de", "time": "Mon Apr 21 22:38:45 2008 +0000" }, "committer": { "name": "Jesper Juhl", "email": "juhl@hera.kernel.org", "time": "Mon Apr 21 22:38:45 2008 +0000" }, "message": "DMA engine: typo fixes\n\nSpelling fixes for dmaengine.[ch]\n\nSigned-off-by: Sebastian Siewior \u003cbigeasy@linutronix.de\u003e\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Jesper Juhl \u003cjesper.juhl@gmail.com\u003e\n" }, { "commit": "636bdeaa1243327501edfd2a597ed7443eb4239a", "tree": "59b894f124e3664ea4a537d7c07c527abdb9c8da", "parents": [ "c4fe15541d0ef5cc8cc1ce43057663851f8fc387" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 20:17:26 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 13:25:54 2008 -0700" }, "message": "dmaengine: ack to flags: make use of the unused bits in the \u0027ack\u0027 field\n\n\u0027ack\u0027 is currently a simple integer that flags whether or not a client is done\ntouching fields in the given descriptor. It is effectively just a single bit\nof information. Converting this to a flags parameter allows the other bits to\nbe put to use to control completion actions, like dma-unmap, and capture\nresults, like xor-zero-sum \u003d\u003d 0.\n\nChanges are one of:\n1/ convert all open-coded -\u003eack manipulations to use async_tx_ack\n and async_tx_test_ack.\n2/ set the ack bit at prep time where possible\n3/ make drivers store the flags at prep time\n4/ add flags to the device_prep_dma_interrupt prototype\n\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "c4fe15541d0ef5cc8cc1ce43057663851f8fc387", "tree": "f54ffc254e1264ab7d33fe43e30078e6ecd36bd8", "parents": [ "ce4d65a5db77e1568c82d5151a746f627c4f6ed5" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 20:17:26 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 13:25:54 2008 -0700" }, "message": "iop-adma: remove the workaround for missed interrupts on iop3xx\n\nThis workaround was covering the dependency submission bug in async_tx.\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "ce4d65a5db77e1568c82d5151a746f627c4f6ed5", "tree": "1f3936d2984fc03125bde025796465f9cada9075", "parents": [ "19242d7233df7d658405d4b7ee1758d21414cfaa" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 20:17:26 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 13:25:54 2008 -0700" }, "message": "async_tx: kill -\u003edevice_dependency_added\n\nDMA drivers no longer need to be notified of dependency submission\nevents as async_tx_run_dependencies and async_tx_channel_switch will\nhandle the scheduling and execution of dependent operations.\n\n[sfr@canb.auug.org.au: extend this for fsldma]\nAcked-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "19242d7233df7d658405d4b7ee1758d21414cfaa", "tree": "4bffa2700c30fdb454dfa150115a0607c6cf3d2a", "parents": [ "1c62979ed29a8e2bf9fbe1db101c81a0089676f8" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 20:17:25 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 13:25:05 2008 -0700" }, "message": "async_tx: fix multiple dependency submission\n\nShrink struct dma_async_tx_descriptor and introduce\nasync_tx_channel_switch to properly inject a channel switch interrupt in\nthe descriptor stream. This simplifies the locking model as drivers no\nlonger need to handle dma_async_tx_descriptor.lock.\n\nAcked-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "1c62979ed29a8e2bf9fbe1db101c81a0089676f8", "tree": "c652c60d180ec4c5f6fbe17eabeed7b1ac5b601b", "parents": [ "411e23dbe9c5867045f34ba83ee84b31b5b9950c" ], "author": { "name": "Zhang Wei", "email": "wei.zhang@freescale.com", "time": "Thu Apr 17 20:17:25 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 13:22:16 2008 -0700" }, "message": "fsldma: Split the MPC83xx event from MPC85xx and refine irq codes.\n\nSplit MPC83xx EOCDI event from MPC85xx EOLNI event, which is\nalso need to update cookie and start the next transfer.\nThe DMA channel irq handler function code is refined.\nThe patch is tested on MPC8377MDS board.\n\nSigned-off-by: Zhang Wei \u003cwei.zhang@freescale.com\u003e\nSigned-off-by; Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "411e23dbe9c5867045f34ba83ee84b31b5b9950c", "tree": "bbdf0ce4244c52e1256082711da17c8775a2f48f", "parents": [ "4b119e21d0c66c22e8ca03df05d9de623d0eb50f" ], "author": { "name": "Zhang Wei", "email": "wei.zhang@freescale.com", "time": "Thu Apr 17 20:17:25 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 17 13:22:15 2008 -0700" }, "message": "fsldma: Remove CONFIG_FSL_DMA_SELFTEST, keep fsl_dma_self_test() running always.\n\nAlways enabling the fsl_dma_self_test() to ensure the DMA controller\nshould works well after the driver probed.\n\nSigned-off-by: Zhang Wei \u003cwei.zhang@freescale.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "049c9d45531d9825bf737891163a794fca1421c5", "tree": "7f3f782cdbc2b467ff7c5714328734b94e27b087", "parents": [ "96ce1b6dc5824cc6027c954b9a2e4717c70e01b5" ], "author": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Mon Mar 31 11:13:21 2008 -0500" }, "committer": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Mon Mar 31 11:45:41 2008 -0500" }, "message": "[POWERPC] fsldma: Use compatiable binding as spec\n\nDocumentation/powerpc/booting-without-of.txt specifies the\ncompatiables we should bind to for this driver (elo, eloplus).\nUse these instead of the extremely specific \u0027mpc8540\u0027 and \u0027mpc8349\u0027\ncompatiables.\n\nAcked-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\n" }, { "commit": "a4e6d5d3817ebae167e78e5957cd9e624be200c7", "tree": "5d69f988bc7bdb5d4c5f9c31210fc1d98848c76a", "parents": [ "f0bb3cfde03ae6d492447883f786c6ee9a4db2ca" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Sat Mar 29 03:10:18 2008 +0000" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Mar 30 14:20:24 2008 -0700" }, "message": "fix the broken annotations in fsldma\n\n a) every bitwise declaration will give a unique type; use typedefs.\n\n b) no need to bother with the stuff pointed to by iomem pointers,\n unless it\u0027s accessed directly. noderef will force us to use helpers\n anyway.\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "53a0c98e117272125183138aefc6b13b4a5f38a1", "tree": "36f5a77537f0d6eb4b3d58635899f1ecdf645ea9", "parents": [ "5cf83b9b1279dbcdbcf91522bf766c998270ec44" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Sat Mar 29 03:08:08 2008 +0000" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Mar 30 14:18:41 2008 -0700" }, "message": "ioat_dca __iomem annotations\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f79abb627f033c85a6088231f20c85bc4a9bd757", "tree": "151538a3a33026ae516606240a13404d1f1e7037", "parents": [ "f920bb6f5fe21047e669381fe4dd346f6a9d3562" ], "author": { "name": "Zhang Wei", "email": "wei.zhang@freescale.com", "time": "Tue Mar 18 18:45:00 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Mar 18 17:00:59 2008 -0700" }, "message": "fsldma: Fix the DMA halt when using DMA_INTERRUPT async_tx transfer.\n\nThe DMA_INTERRUPT async_tx is a NULL transfer, thus the BCR(count register)\nis 0. When the transfer started with a byte count of zero, the DMA\ncontroller will triger a PE(programming error) event and halt, not a normal\ninterrupt. I add special codes for PE event and DMA_INTERRUPT\nasync_tx testing.\n\nSigned-off-by: Zhang Wei \u003cwei.zhang@freescale.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "3d9b525b69bc3302d8355e5f5cf081a856c211e0", "tree": "d0f8b4c9be02e4e48bc4bd0e099a6907eacf40ce", "parents": [ "9c98718e7371fa781043d5a2e70cecebec048091" ], "author": { "name": "Harvey Harrison", "email": "harvey.harrison@gmail.com", "time": "Thu Mar 13 17:45:28 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Mar 13 10:57:09 2008 -0700" }, "message": "iop-adma.c: replace remaining __FUNCTION__ occurrences\n\n__FUNCTION__ is gcc-specific, use __func__\n\nSigned-off-by: Harvey Harrison \u003charvey.harrison@gmail.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "9c98718e7371fa781043d5a2e70cecebec048091", "tree": "5b89ca3b3a1fc61e12371859f2318d3ec6ed013d", "parents": [ "2187c269ad29510f1d65ec684133d1d3426d0eed" ], "author": { "name": "Zhang Wei", "email": "wei.zhang@freescale.com", "time": "Thu Mar 13 17:45:28 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Mar 13 10:57:09 2008 -0700" }, "message": "fsldma: Add a completed cookie updated action in DMA finish interrupt.\n\nThe patch \u0027fsldma: do not cleanup descriptors in hardirq context\u0027\n(commit 222ccf9ab838a1ca7163969fabd2cddc10403fb5) removed descriptors\ncleanup function to tasklet but the completed cookie do not updated.\nThus, the DMA controller will get lots of duplicated transfer\ninterrupts. Just make a completed cookie update in interrupt handler.\nAnd keep other cleanup jobs in tasklet function.\n\nTested-by: Sebastian Siewior \u003cbigeasy@linutronix.de\u003e\nSigned-off-by: Zhang Wei \u003cwei.zhang@freescale.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "2187c269ad29510f1d65ec684133d1d3426d0eed", "tree": "491d854f31d0080cf74842561a5df9a3f71bcf98", "parents": [ "9b941c6660bae673e27c207f1d20d98ef8ecd450" ], "author": { "name": "Zhang Wei", "email": "wei.zhang@freescale.com", "time": "Thu Mar 13 17:45:28 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Mar 13 10:57:08 2008 -0700" }, "message": "fsldma: Add device_prep_dma_interrupt support to fsldma.c\n\nThis is a bug that I assigned DMA_INTERRUPT capability to fsldma\nbut missing device_prep_dma_interrupt function. For a bug in\ndmaengine.c the driver passed BUG_ON() checking. The patch fixes it.\n\nSigned-off-by: Zhang Wei \u003cwei.zhang@freescale.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "9b941c6660bae673e27c207f1d20d98ef8ecd450", "tree": "e34aa803ae33e745e0c013dc35ebafb8d9bcca55", "parents": [ "56822843ff99c88c778a614851328fcbb1503d10" ], "author": { "name": "Zhang Wei", "email": "wei.zhang@freescale.com", "time": "Thu Mar 13 17:45:28 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Mar 13 10:57:07 2008 -0700" }, "message": "dmaengine: Fix a bug about BUG_ON() on DMA engine capability DMA_INTERRUPT.\n\nThe device-\u003edevice_prep_dma_interrupt function is used by\nDMA_INTERRUPT capability, not DMA_ZERO_SUM.\n\nSigned-off-by: Zhang Wei \u003cwei.zhang@freescale.com\u003e\nAcked-by: Maciej Sosnowski \u003cmaciej.sosnowski@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "56822843ff99c88c778a614851328fcbb1503d10", "tree": "6b747f0a942451be80e69bac0fcf066530cef15a", "parents": [ "93d74463d018ddf05c169ad399e62e90e0f82fc0" ], "author": { "name": "Zhang Wei", "email": "wei.zhang@freescale.com", "time": "Thu Mar 13 10:45:27 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Mar 13 10:57:07 2008 -0700" }, "message": "fsldma: Fix fsldma.c warning messages when it\u0027s compiled under PPC64.\n\nThere are warning messages reported by Stephen Rothwell with\nARCH\u003dpowerpc allmodconfig build:\n\ndrivers/dma/fsldma.c: In function \u0027fsl_dma_prep_memcpy\u0027:\ndrivers/dma/fsldma.c:439: warning: comparison of distinct pointer types\nlacks a cast\ndrivers/dma/fsldma.c: In function \u0027fsl_chan_xfer_ld_queue\u0027:\ndrivers/dma/fsldma.c:584: warning: format \u0027%016llx\u0027 expects type \u0027long long\nunsigned int\u0027, but argument 4 has type \u0027dma_addr_t\u0027\ndrivers/dma/fsldma.c: In function \u0027fsl_dma_chan_do_interrupt\u0027:\ndrivers/dma/fsldma.c:668: warning: format \u0027%x\u0027 expects type \u0027unsigned int\u0027,\nbut argument 5 has type \u0027dma_addr_t\u0027\ndrivers/dma/fsldma.c:684: warning: format \u0027%016llx\u0027 expects type \u0027long long\nunsigned int\u0027, but argument 4 has type \u0027dma_addr_t\u0027\ndrivers/dma/fsldma.c:684: warning: format \u0027%016llx\u0027 expects type \u0027long long\nunsigned int\u0027, but argument 5 has type \u0027dma_addr_t\u0027\ndrivers/dma/fsldma.c:701: warning: format \u0027%02x\u0027 expects type \u0027unsigned\nint\u0027, but argument 4 has type \u0027dma_addr_t\u0027\ndrivers/dma/fsldma.c: In function \u0027fsl_dma_self_test\u0027:\ndrivers/dma/fsldma.c:840: warning: format \u0027%d\u0027 expects type \u0027int\u0027, but\nargument 5 has type \u0027size_t\u0027\ndrivers/dma/fsldma.c: In function \u0027of_fsl_dma_probe\u0027:\ndrivers/dma/fsldma.c:1010: warning: format \u0027%08x\u0027 expects type \u0027unsigned\nint\u0027, but argument 5 has type \u0027resource_size_t\u0027\n\nThis patch fixed the above warning messages.\n\nSigned-off-by: Zhang Wei \u003cwei.zhang@freescale.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "6497dcffe07b7c3d863f9899280c4f6eae999161", "tree": "2b57ca65f6be0bee163363d694a19052b6491bc7", "parents": [ "ec8670f1f795badedaa056a3a3245b9b82201747" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Sat Mar 01 07:52:14 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Mar 04 10:16:46 2008 -0700" }, "message": "ioat: fix \u0027ack\u0027 handling, driver must ensure that \u0027ack\u0027 is zero\n\nInitialize \u0027ack\u0027 to zero in case the descriptor has been recycled.\n\nPrevents \"kernel BUG at crypto/async_tx/async_xor.c:185!\"\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nAcked-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: stable@kernel.org\n" }, { "commit": "222ccf9ab838a1ca7163969fabd2cddc10403fb5", "tree": "7d0c6102be13a4de0d6e22254625dc505923bcb7", "parents": [ "173acc7ce8538f1f3040791dc622a92aadc12cf4" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Sat Mar 01 07:51:17 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Mar 04 10:16:46 2008 -0700" }, "message": "fsldma: do not cleanup descriptors in hardirq context\n\n\"Cleaning\" descriptors involves calling pending callbacks and clients\nassume that their callback will only ever happen in softirq context.\nDelay cleanup to the tasklet.\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nAcked-by: Zhang Wei \u003cwei.zhang@freescale.com\u003e\n" }, { "commit": "173acc7ce8538f1f3040791dc622a92aadc12cf4", "tree": "f408e415851cf3343af6077287984169958951ad", "parents": [ "976dde010e513a9c7c3117a32b7b015f84b37430" ], "author": { "name": "Zhang Wei", "email": "wei.zhang@freescale.com", "time": "Sat Mar 01 07:42:48 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Tue Mar 04 10:16:46 2008 -0700" }, "message": "dmaengine: add driver for Freescale MPC85xx DMA controller\n\nThe driver implements DMA engine API for Freescale MPC85xx DMA controller,\nwhich could be used by devices in the silicon. The driver supports the\nBasic mode of Freescale MPC85xx DMA controller. The MPC85xx processors\nsupported include MPC8540/60, MPC8555, MPC8548, MPC8641 and so on.\n\nThe MPC83xx(MPC8349, MPC8360) are also supported.\n\n[kamalesh@linux.vnet.ibm.com: build fix]\n[dan.j.williams@intel.com: merge mm fixes, rebase on async_tx-2.6.25]\nSigned-off-by: Zhang Wei \u003cwei.zhang@freescale.com\u003e\nSigned-off-by: Ebony Zhu \u003cebony.zhu@freescale.com\u003e\nAcked-by: Kumar Gala \u003cgalak@gate.crashing.org\u003e\nCc: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "d4c56f97ff21df405d0cebe11f49e3c3c79662b5", "tree": "e6b0de433d7c985982ac12815998242a786d87b2", "parents": [ "0036731c88fdb5bf4f04a796a30b5e445fc57f54" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Sat Feb 02 19:49:58 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Wed Feb 06 10:12:18 2008 -0700" }, "message": "async_tx: replace \u0027int_en\u0027 with operation preparation flags\n\nPass a full set of flags to drivers\u0027 per-operation \u0027prep\u0027 routines.\nCurrently the only flag passed is DMA_PREP_INTERRUPT. The expectation is\nthat arch-specific async_tx_find_channel() implementations can exploit this\ncapability to find the best channel for an operation.\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nAcked-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nReviewed-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "0036731c88fdb5bf4f04a796a30b5e445fc57f54", "tree": "66982e4a9fdb92fedadca35c0ccaa0b9a75e9d2e", "parents": [ "d909b347591a23c5a2c324fbccd4c9c966f31c67" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Sat Feb 02 19:49:57 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Wed Feb 06 10:12:17 2008 -0700" }, "message": "async_tx: kill tx_set_src and tx_set_dest methods\n\nThe tx_set_src and tx_set_dest methods were originally implemented to allow\nan array of addresses to be passed down from async_xor to the dmaengine\ndriver while minimizing stack overhead. Removing these methods allows\ndrivers to have all transaction parameters available at \u0027prep\u0027 time, saves\ntwo function pointers in struct dma_async_tx_descriptor, and reduces the\nnumber of indirect branches..\n\nA consequence of moving this data to the \u0027prep\u0027 routine is that\nmulti-source routines like async_xor need temporary storage to convert an\narray of linear addresses into an array of dma addresses. In order to keep\nthe same stack footprint of the previous implementation the input array is\nreused as storage for the dma addresses. This requires that\nsizeof(dma_addr_t) be less than or equal to sizeof(void *). As a\nconsequence CONFIG_DMADEVICES now depends on !CONFIG_HIGHMEM64G. It also\nrequires that drivers be able to make descriptor resources available when\nthe \u0027prep\u0027 routine is polled.\n\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nAcked-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\n" }, { "commit": "e73ef9acfd30f36bf7c60237ecffe7bbca8068d6", "tree": "bf949d319cb87ebc23ee26f650dcf1b39aa794e0", "parents": [ "cf8f68aa76e8e12f9dcbba3ffe61fb9f2a3a0c2b" ], "author": { "name": "Denis Cheng", "email": "crquan@gmail.com", "time": "Sat Feb 02 19:30:01 2008 -0700" }, "committer": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Wed Feb 06 10:12:17 2008 -0700" }, "message": "iop-adma: use LIST_HEAD instead of LIST_HEAD_INIT\n\nthese three list_head are all local variables, but can also use LIST_HEAD.\n\nSigned-off-by: Denis Cheng \u003ccrquan@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\n" }, { "commit": "891f78ea833edd4a1e524e15bfe297a7a84d81a0", "tree": "533f12df743c4adc6d2b40d048ffb7d16c93e591", "parents": [ "62ca8792560e5bd7dc09f54ed3523a7864f416c7" ], "author": { "name": "Tony Jones", "email": "tonyj@suse.de", "time": "Tue Sep 25 02:03:03 2007 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 20:40:05 2008 -0800" }, "message": "DMA: Convert from class_device to device for DMA engine\n\nSigned-off-by: Tony Jones \u003ctonyj@suse.de\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nCc: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "bb8e8bcce7eceacb52eb0a3ebb64202ad6bcc438", "tree": "be4aec4e38ff481f4e65f3af077ef49e7a7a9eac", "parents": [ "711924b1052a280bd2452c3babb9816e4a77c723" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Mon Dec 17 16:20:08 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Dec 17 19:28:17 2007 -0800" }, "message": "I/OAT: fix null device in call to dev_err()\n\nWe can\u0027t use the device in a dev_err() after a kzalloc failure or after the\nkfree, so simplify it to the pdev that was originally passed in.\n\nCc: Eric Sesterhenn \u003csnakebyte@gmx.de\u003e\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "711924b1052a280bd2452c3babb9816e4a77c723", "tree": "7eea7de34b1f6bdd37989cee9916ee5f5f4e3093", "parents": [ "7c9e70efbfc3186674d93451e0fbf18365347b4d" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Mon Dec 17 16:20:08 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Dec 17 19:28:17 2007 -0800" }, "message": "I/OAT: fixups from code comments\n\nA few fixups from Andrew\u0027s code comments.\n - removed \"static inline\" forward-declares\n - changed use of min() to min_t()\n - removed some unnecessary NULL initializations\n - removed a couple of BUG() calls\n\nFixes this:\n\ndrivers/dma/ioat_dma.c: In function `ioat1_tx_submit\u0027:\ndrivers/dma/ioat_dma.c:177: sorry, unimplemented: inlining failed in call to \u0027__ioat1_dma_memcpy_issue_pending\u0027: function body not available\ndrivers/dma/ioat_dma.c:268: sorry, unimplemented: called from here\n\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: \"Williams, Dan J\" \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6d4f5879b6f4da50bde94e1cae73755978ed048f", "tree": "149340866e3a7d65fca49763ce7caa56ada370c4", "parents": [ "e593f070b40887dc0415646a4c0720eb8630c722" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Nov 28 16:21:43 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Nov 29 09:24:53 2007 -0800" }, "message": "dmaengine: correct invalid assumptions in the Kconfig text\n\nThis patch corrects recently changed (and now invalid) Kconfig descriptions\nfor the DMA engine framework:\n\n - Non-Intel(R) hardware also has DMA engines;\n - DMA is used for more than memcpy and RAID offloading.\n\nIn fact, on most platforms memcpy and RAID aren\u0027t factors, and DMA\nexists so that peripherals can transfer data to/from memory while\nthe CPU does other work.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7bb67c14fd3778504fb77da30ce11582336dfced", "tree": "24b65f267a98716824c7955be02af8879cfda688", "parents": [ "cc9f2f8f68efcc73d8793a4df2c4c50196e90080" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Wed Nov 14 16:59:51 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Nov 14 18:45:41 2007 -0800" }, "message": "I/OAT: Add support for version 2 of ioatdma device\n\nAdd support for version 2 of the ioatdma device. This device handles\nthe descriptor chain and DCA services slightly differently:\n - Instead of moving the dma descriptors between a busy and an idle chain,\n this new version uses a single circular chain so that we don\u0027t have\n rewrite the next_descriptor pointers as we add new requests, and the\n device doesn\u0027t need to re-read the last descriptor.\n - The new device has the DCA tags defined internally instead of needing\n them defined statically.\n\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: \"Williams, Dan J\" \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "348badf1e825323c419dd118f65783db0f7d2ec8", "tree": "126cddb26c14233eaff8ddd6a240fe4ac69204ee", "parents": [ "90d8dabf74179e6615bd4688a118e12ec29ab7aa" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Nov 14 16:59:27 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Nov 14 18:45:39 2007 -0800" }, "message": "dmaengine: fix broken device refcounting\n\nWhen a DMA device is unregistered, its reference count is decremented twice\nfor each channel: Once dma_class_dev_release() and once in\ndma_chan_cleanup(). This may result in the DMA device driver\u0027s remove()\nfunction completing before all channels have been cleaned up, causing lots\nof use-after-free fun.\n\nFix it by incrementing the device\u0027s reference count twice for each\nchannel during registration.\n\n[dan.j.williams@intel.com: kill unnecessary client refcounting]\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4138f08d1c2783a28df2af6ed81aa180462ec374", "tree": "11b9d3b4cbafe4c9d1dd7c9b7ef934dee2bafdb4", "parents": [ "bc2a3f86f46569fb091792867ce67c9ab24dfd0f" ], "author": { "name": "Andi Kleen", "email": "ak@suse.de", "time": "Mon Oct 29 14:37:18 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Oct 30 08:06:55 2007 -0700" }, "message": "Remove bogus default y for DMAR and NET_DMA\n\nNo reason I can think of of making them default y Most people don\u0027t have\nthe hardware and with default y they just pollute lots of configs during\nmake oldconfig.\n\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\nAcked-by: Jeff Garzik \u003cjeff@garzik.org\u003e\nAcked-by: \"Nelson, Shannon\" \u003cshannon.nelson@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "952184304fbf030f0133d8b66a91b2847dce729e", "tree": "07a6ca0121cfa94bda58c0f49ac509f4b62fcf64", "parents": [ "7f2b291f56d08e001454d16d3c92e175434898b3" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Thu Oct 18 03:07:15 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 18 14:37:32 2007 -0700" }, "message": "I/OAT: Add completion callback for async_tx interface use\n\nThe async_tx interface includes a completion callback. This adds support\nfor using that callback, including using interrupts on completion.\n\n[akpm@linux-foundation.org: various fixes]\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7f2b291f56d08e001454d16d3c92e175434898b3", "tree": "41b0c324e93db47fd5114fed2fddbba963492383", "parents": [ "5149fd010f404889b7d8f79159057791fbb817b1" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Thu Oct 18 03:07:14 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 18 14:37:32 2007 -0700" }, "message": "I/OAT: Tighten descriptor setup performance\n\nThe change to the async_tx interface cost this driver some performance by\nspreading the descriptor setup across several functions, including multiple\npasses over the new descriptor chain. Here we bring the work back into one\nprimary function and only do one pass.\n\n[akpm@linux-foundation.org: cleanups, uninline]\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "5149fd010f404889b7d8f79159057791fbb817b1", "tree": "0ec09c009f35d59be64e3b952b6deba39b61f6e1", "parents": [ "dfe2299e7b35a0adfc87f04d3e725ccc508d7626" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Thu Oct 18 03:07:13 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 18 14:37:32 2007 -0700" }, "message": "I/OAT: clean up error handling and some print messages\n\nMake better use of dev_err(), and catch an error where the transaction\ncreation might fail.\n\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "dfe2299e7b35a0adfc87f04d3e725ccc508d7626", "tree": "5dbcd9290ebf4f4830d736df5b3324f0146bb6b0", "parents": [ "7df7cf0676060d778486359676734447347e1caf" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Thu Oct 18 03:07:13 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 18 14:37:32 2007 -0700" }, "message": "I/OAT: clean up of dca provider start and stop\n\nDon\u0027t start ioat_dca if ioat_dma didn\u0027t start, and then stop ioat_dca\nbefore stopping ioat_dma. Since the ioat_dma side does the pci device\nwork, This takes care of ioat_dca trying to use a bad device reference.\n\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7df7cf0676060d778486359676734447347e1caf", "tree": "1a452993706602ea26b2ec4040fae4818c8e22bb", "parents": [ "d8c98618f4bb8161cc0c14e110b07ba37249332b" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Thu Oct 18 03:07:12 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 18 14:37:32 2007 -0700" }, "message": "I/OAT: cleanup pci issues\n\nReorder the pci release actions\n Letting go of the resources in the right order helps get rid of\n occasional kernel complaints.\n\nFix the pci_driver object name [Randy Dunlap]\n Rename the struct pci_driver data so that false section mismatch\n warnings won\u0027t be produced.\n\nCc: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nCc: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "af49d9248fca6f26cbdb01918334f71d9040df80", "tree": "5d6a7f4d5ca55ff17fbfc98cacac37be62c7a4a3", "parents": [ "d9c9bef1345e5d9258febce2a37e4d40319fa728" ], "author": { "name": "Rusty Russell", "email": "rusty@rustcorp.com.au", "time": "Tue Oct 16 23:26:27 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Oct 17 08:42:49 2007 -0700" }, "message": "Remove \"unsafe\" from module struct\n\nAdrian Bunk points out that \"unsafe\" was used to mark modules touched by\nthe deprecated MOD_INC_USE_COUNT interface, which has long gone. It\u0027s time\nto remove the member from the module structure, as well.\n\nIf you want a module which can\u0027t unload, don\u0027t register an exit function.\n\n(Vlad Yasevich says SCTP is now safe to unload, so just remove the\n__unsafe there).\n\nSigned-off-by: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nAcked-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nAcked-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nAcked-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\nCc: Sridhar Samudrala \u003csri@us.ibm.com\u003e\nCc: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2ed6dc34f9ed39bb8e4c81ea1056f0ba56315841", "tree": "e3f6ca7961f9c4e34453d06e584c0bc98ec630d7", "parents": [ "7589670f37736bcc119ebfbd69aafea6d585d1d4" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Tue Oct 16 01:27:42 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Oct 16 09:43:09 2007 -0700" }, "message": "I/OAT: Add DCA services\n\nAdd code to connect to the DCA driver and provide cpu tags for use by\ndrivers that would like to use Direct Cache Access hints.\n\n [Adrian Bunk] Several Kconfig cleanup items\n [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when\n\t\t\t built for uni-processor\n\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3e037454bcfa4b187e8293d2121bd8c0f5a5c31c", "tree": "751a2eace11b280cc1a19873788b778009188be9", "parents": [ "8ab89567da0cea9bae2c1b5dad47b51c424479e4" ], "author": { "name": "Shannon Nelson", "email": "shannon.nelson@intel.com", "time": "Tue Oct 16 01:27:40 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Oct 16 09:43:09 2007 -0700" }, "message": "I/OAT: Add support for MSI and MSI-X\n\nAdd support for MSI and MSI-X interrupt handling, including the ability\nto choose the desired interrupt method.\n\nSigned-off-by: Shannon Nelson \u003cshannon.nelson@intel.com\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\n[bunk@kernel.org: drivers/dma/ioat_dma.c: make 3 functions static]\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" } ], "next": "8ab89567da0cea9bae2c1b5dad47b51c424479e4" }