)]}' { "log": [ { "commit": "57cf8043a64b56a10b9f194572548a3dfb62e596", "tree": "a0b9530e824c7e7b1417e20f87e800819abfe285", "parents": [ "108697c44b8e50bea3505c6bf9667da4627cb2d5" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Fri May 13 10:45:43 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 14:10:49 2011 -0400" }, "message": "nl80211: Move peer link state definition to nl80211\n\nThese definitions need to be exposed now that we can set the peer link\nstates via NL80211_ATTR_STA_PLINK_STATE. They were already being\n(opaquely) reported by NL80211_STA_INFO_PLINK_STATE.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "40b275b69ee660274b77fb612b0db31fd282fc3f", "tree": "29a4f82a44a12edcf9db5de6a3c6df9615a5799e", "parents": [ "ec034b208dc8aa5dc73ec46c3f27e34c5efbf113" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri May 13 14:15:49 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 14:10:41 2011 -0400" }, "message": "mac80211: sparse RCU annotations\n\nThis adds sparse RCU annotations to most of\nmac80211, only the mesh code remains to be\ndone.\n\nDue the the previous patches, the annotations\nare pretty simple. The only thing that this\nactually changes is removing the RCU usage of\nkey-\u003esta in debugfs since this pointer isn\u0027t\nactually an RCU-managed pointer (it only has\na single assignment done before the key even\ngoes live). As that is otherwise harmless, I\ndecided to make it part of this patch.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "85a9994a0a6cba1a6cc6af4bd3ebd85f778be0fe", "tree": "e9dd8fff75d9c0ee2f5aec129bb6132499c72461", "parents": [ "a3836e02ba4c50db958d32d710b226f2408623dc" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Thu May 12 16:28:29 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 12 14:10:55 2011 -0400" }, "message": "cfg80211/mac80211: avoid bounce back mac-\u003ecfg-\u003emac on sched_scan_stopped\n\nWhen sched_scan_stopped was called by the driver, mac80211 calls\ncfg80211, which in turn was calling mac80211 back with a flag\n\"driver_initiated\". This flag was used so that mac80211 would do the\nnecessary cleanup but would not call the driver. This was enough to\nprevent the bounce back between the driver and mac80211, but not\nbetween mac80211 and cfg80211.\n\nTo fix this, we now do the cleanup in mac80211 before calling\ncfg80211. To help with locking issues, the workqueue was moved from\ncfg80211 to mac80211.\n\nReported-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a3836e02ba4c50db958d32d710b226f2408623dc", "tree": "07fe8c29f281f4c25653953633a2abf20b025432", "parents": [ "8cb231530f03961b55aa4e84e6ead5590bcde04d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu May 12 15:11:37 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 12 14:10:54 2011 -0400" }, "message": "mac80211: fix a few RCU issues\n\nA few configuration functions correctly do\nrcu_read_lock() but don\u0027t correctly reference\nsome pointers protected by RCU. Fix that.\n\nCc: stable@kernel.org\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5c0c36412b2dc6b1e243c7e9115306fe286583b7", "tree": "a189957b3a8e939d19da304541ba087f1264085a", "parents": [ "dea4096bc41a9642039840ced91e585d04883a16" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu May 12 14:31:49 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 12 14:10:53 2011 -0400" }, "message": "mac80211: make key locking clearer\n\nThe code in ieee80211_del_key() doesn\u0027t acquire the\nkey_mtx properly when it dereferences the keys. It\nturns out that isn\u0027t actually necessary since the\nkey_mtx itself seems to be redundant since all key\nmanipulations are done under the RTNL, but as long\nas we have the key_mtx we should use it the right\nway too.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4daf50f20256e0022c87c1609226e971a70c82fd", "tree": "27b27980611aeb7d929c1e56380640dd0d2bf206", "parents": [ "bbe6ad6dcb1eb26bd12ec85320f402721c3383ae" ], "author": { "name": "Yogesh Ashok Powar", "email": "yogeshp@marvell.com", "time": "Thu May 12 09:32:17 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 12 09:32:17 2011 -0400" }, "message": "mac80211: Fix mesh-related build breakage...\n\nnet/mac80211/cfg.c: In function ‘sta_apply_parameters’:\nnet/mac80211/cfg.c:746: error: ‘struct sta_info’ has no member named ‘plink_state’\nmake[1]: *** [net/mac80211/cfg.o] Error 1\nmake: *** [net/mac80211/mac80211.ko] Error 2\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "79f460ca49d8d5700756ab7071c951311c7f29cc", "tree": "b11b62473697c6c1858b83b3abe5181990f85c19", "parents": [ "807f8a8c300435d5483e8d78df9dcdbc27333166" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed May 11 17:09:36 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 15:12:27 2011 -0400" }, "message": "mac80211: add support for HW scheduled scan\n\nImplement support for HW scheduled scan. The mac80211 code doesn\u0027t perform\nscheduled scans itself, but calls the driver to start and stop scheduled\nscans.\n\nThis patch also creates a trace event class to be used by drv_hw_scan\nand the new drv_sched_scan_start and drv_sched_stop functions, in\norder to avoid duplicate code.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ff973af74aa6932ca4758266bccec68e8135ddf7", "tree": "4d18994cffe190d50acaae4ecce1c3684186f063", "parents": [ "9c3990aaec0ad9f686ef6480f6861f2df89b2a7a" ], "author": { "name": "Thomas Pedersen", "email": "thomas@cozybit.com", "time": "Tue May 03 16:57:12 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:44:47 2011 -0400" }, "message": "nl80211: allow installing keys for a meshif\n\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9c3990aaec0ad9f686ef6480f6861f2df89b2a7a", "tree": "5e073ffce0ce0aed45e9dfeb9f41efc140c770f7", "parents": [ "0a35d36d6f019bde6c98812456798275b02e5aee" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue May 03 16:57:11 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:44:46 2011 -0400" }, "message": "nl80211: Let userspace drive the peer link management states.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b130e5cec958bae3867cf6ab09a9b24ba8fada01", "tree": "945eca0ace3d299dfd83de7b7e13c60aa36ba2e9", "parents": [ "f3a57fd148a4afd3c38f558c5b44972cb29ea8ba" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue May 03 16:57:07 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:37:47 2011 -0400" }, "message": "nl80211: Introduce NL80211_MESH_SETUP_USERSPACE_AMPE\n\nIntroduce a new configuration option to support AMPE from userspace.\n\nPrior to this series we only supported authentication in userspace: an\nauthentication daemon would authenticate peer candidates in userspace\nand hand them over to the kernel. From that point the mesh stack would\ntake over and establish a peer link (Mesh Peering Management).\n\nThese patches introduce support for Authenticated Mesh Peering Exchange\nin userspace. The userspace daemon implements the AMPE protocol and on\nsuccessfull completion create mesh peers and install encryption keys.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eecc48000afe2ca6da22122d553b7cad294e42fc", "tree": "ade8a18351be5ca63b14d24f3f4db47909486fba", "parents": [ "ff1b6e69ad4f31fb3c9c6da2665655f2e798dd70" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed May 04 15:37:29 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 05 14:59:20 2011 -0400" }, "message": "mac80211: add basic support for WoWLAN\n\nThis adds basic support for the new WoWLAN\nconfiguration in mac80211. The behaviour is\ncompletely offloaded to the driver though,\nwith two new callbacks (suspend/resume).\n\nOptions for the driver include a complete\nreconfiguration after wakeup, and exposing\nall the triggers it wants to support.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ff1b6e69ad4f31fb3c9c6da2665655f2e798dd70", "tree": "6fc049fd0389ffb382ea401096d7bd665642af5c", "parents": [ "8f7f3b2fcc4ccbba0be776049df41a2f96c986ac" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed May 04 15:37:28 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 05 14:59:19 2011 -0400" }, "message": "nl80211/cfg80211: WoWLAN support\n\nThis is based on (but now quite far from) the\noriginal work from Luis and Eliad. Add support\nfor configuring WoWLAN triggers, and getting\nthe configuration out again. Changes from the\noriginal patchset are too numerous to list,\nbut one important change needs highlighting:\nthe suspend() callback is passed NULL for the\ntrigger configuration if userspace has not\nconfigured WoWLAN at all.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bdbfd6b582f55384059d9ac5e65b3653092e6adf", "tree": "bca5492d67d2e4b210539ae9029f54568165f297", "parents": [ "8973a6e770fc891f92daacbc1c92c7cd396fcf7e" ], "author": { "name": "Sujith Manoharan", "email": "Sujith.Manoharan@atheros.com", "time": "Wed Apr 27 16:56:51 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 28 14:53:19 2011 -0400" }, "message": "mac80211: Add new API for rate selection\n\nThis patch adds a new API for setting a TX rate mask in\ndrivers that have rate control in either the firmware or hardware.\nThis can be used for various purposes, for example, masking out the\n11b rates in P2P operation.\n\nSigned-off-by: Sujith Manoharan \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "429576b97c623b9c4e3375fb7c37bce377f51e68", "tree": "dc4fd40ae54d177ddb3cb3991e8c3ff019eef238", "parents": [ "9835a30e980561082beb02ce724f6e555787bc19", "069f40fc07f6df3da325e7ea1698a0d6247983d5" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 26 15:39:10 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 26 15:39:10 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "243e6df4ed919880d079d717641ad699c6530a03", "tree": "dafe7720e68fcb8e9ce1d5d871386b9e6380f67b", "parents": [ "10e99777e926907e43fa57ec1208c3f7787fd290" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Apr 19 20:44:04 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 20 16:05:59 2011 -0400" }, "message": "mac80211: fix SMPS debugfs locking\n\nThe locking with SMPS requests means that the\ndebugs file should lock the mgd mutex, not the\niflist mutex. Calls to __ieee80211_request_smps()\nneed to hold that mutex, so add an assertion.\n\nThis has always been wrong, but for some reason\nnever been noticed, probably because the locking\nerror only happens while unassociated.\n\nCc: stable@kernel.org [2.6.34+]\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ebe27c91af8b7f4810ae906fbd3eeb2d87850026", "tree": "eff1fe0dbb8ecb4b116d8f96c6beb3eda1c52c7a", "parents": [ "f60c49b67dd6db2ccb740a6a671414f9dab00c4f" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mshajakhan@atheros.com", "time": "Fri Apr 08 21:24:24 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:58:47 2011 -0400" }, "message": "{mac|nl}80211: Add station connected time\n\nAdd station connected time in debugfs. This will be helpful to get a\nmeasure of stability of the connection and for debugging stress issues\n\nCc: Senthilkumar Balasubramanian \u003cSenthilkumar.Balasubramanian@Atheros.com\u003e\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmshajakhan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b39c48fac1fc915a5dcd024bf6e9aabc855ed591", "tree": "d8c5d6e987f388b8c8769d16a51a07dfcd9c3539", "parents": [ "5cff5e01e818029a5d2c3c31b7ae5e5e7ee70452" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:30 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:38 2011 -0400" }, "message": "nl80211/mac80211: let userspace authenticate stations\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5cff5e01e818029a5d2c3c31b7ae5e5e7ee70452", "tree": "6031ce45cf4a1dd62d9f1237a225a0a8ce005cf0", "parents": [ "15d5dda623139bbf6165030fc251bbd5798f4130" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:29 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:37 2011 -0400" }, "message": "mac80211: ignore peers if security is enabled for this mesh\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "581a8b0feeed8877aab3a8ca4c972419790cd07f", "tree": "36ef0e86b367e0abeb0a50fbf59840f125efdbc7", "parents": [ "a22e93f5d819f11d2a2d6332e20ff5b462e5c208" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:27 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:37 2011 -0400" }, "message": "nl80211: rename NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE\n\nTo NL80211_MESH_SETUP_IE. This reflects our ability to insert any ie\ninto a mesh beacon, not simply path selection ies.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f4263c9857e6411ef2388868cc6c79a1602a654e", "tree": "2eec220076c4d56a2460e185076cda6646ef2f9f", "parents": [ "8447c163afeaa7e9f6f015088177b1c8511e0877" ], "author": { "name": "Paul Stewart", "email": "pstew@chromium.org", "time": "Thu Mar 31 09:25:41 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:12 2011 -0400" }, "message": "nl80211: Add BSS parameters to station\n\nThis allows user-space monitoring of BSS parameters for the associated\nstation. This is useful for debugging and verifying that the paramaters\nare as expected.\n\n[Exactly the same as before but bundled into a single message]\n\nSigned-off-by: Paul Stewart \u003cpstew@chromium.org\u003e\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "38c091590f6ed78fcaf114c14ce133e5b3f717e6", "tree": "4293471c1babf894eb5e0bf69e919a4256b428c5", "parents": [ "3677713b799155c96637cdef3fa025e42f3fcf48" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 07 16:19:18 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 11 15:34:10 2011 -0500" }, "message": "mac80211: implement support for cfg80211_ops-\u003e{get,set}_ringparam\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "808118cb41dfe12a1ac0e35515ac4d91b170bdf9", "tree": "98939cd9a6e66bcd70597ba33fdf071914e109ac", "parents": [ "d89dba7a275f40757d27ba16c8bc6aa424656bbe" ], "author": { "name": "Jason Young", "email": "a.young.jason@gmail.com", "time": "Thu Mar 10 16:43:19 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 11 14:15:37 2011 -0500" }, "message": "mac80211: do not enable ps if 802.1x controlled port is unblocked\n\nIf dynamic_ps is disabled, enabling power save before the 4-way\nhandshake completes may delay the station from being authorized to\nsend/receive traffic, i.e. increase roaming times. It also may result in\na failed 4-way handshake depending on the AP\u0027s timing requirements and\nbeacon interval, and the station\u0027s listen interval.\n\nTo fix this, prevent power save from being enabled while the station\nisn\u0027t authorized and recalculate power save whenever the station\u0027s\nauthorized state changes.\n\nSigned-off-by: Jason Young \u003ca.young.jason@gmail.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3af6334c9e4fbf41ef0ebd3b4d5762f26b675c40", "tree": "ffc05f816754d2393963ee13f4c7a3eb515e0627", "parents": [ "c8dcfd8a046c1f49af0c15726761af17b957962d" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sun Feb 27 22:08:01 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 01 13:48:21 2011 -0500" }, "message": "mac80211: add support for showing the last rx bitrate\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5f16a43617d46cf255a66f4dc193a7f5b2540aaf", "tree": "add5e551c9d1abeee57b1fbad632a0e23bdd39b1", "parents": [ "8628172f45c839376bf2b70bbd326d56e68dadc3" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Feb 25 15:36:57 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 25 15:33:40 2011 -0500" }, "message": "mac80211: support direct offchannel TX offload\n\nFor devices supported by iwlwifi sometimes\noff-channel transmissions need to be handled\nby the device completely. To support this\nmac80211 needs to pass the frame directly\nto the driver and not through the TX path\nas the driver needs the frame and channel\ninformation at the same time.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b67afe7f43afd2f5cd98798993561920c1684c12", "tree": "e45a0e41c91a1d199fd865b011ed0d25f5497bb9", "parents": [ "db28569adc692d9fb8a2d2d8e7ebab7fd5481f10", "28bec7b845e10b68e6ba1ade5de0fc566690fc61" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 18 17:03:41 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 18 17:03:41 2011 -0500" }, "message": "Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tdrivers/bluetooth/ath3k.c\n\tdrivers/bluetooth/btusb.c\n" }, { "commit": "4d51e149a6231ea9cc210795cbc358a7c9a8e016", "tree": "94e929d18145e4873c1fc67b3bb583ebd795e765", "parents": [ "8c79a61095936f81cb05e99062185cb987d524ab" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Mon Feb 07 13:44:34 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Feb 09 16:09:45 2011 -0500" }, "message": "mac80211: Properly set work-item channel-type.\n\nSome were indirectly set to NO_HT (zero), but I think\nit\u0027s better to explicitly set it in case the enum ever\nchanges. In cfg.c, it seems the channel-type was just\nignored (and thus always set to NO_HT).\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e9d7732eafe38a717212648b7615399e68abb551", "tree": "172abd98d1272c1e89f8062f4bde41f2af211aff", "parents": [ "771bbd09f7febb854dd7c30f983aa57535f9e8c9" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Feb 01 15:35:36 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Feb 03 16:44:44 2011 -0500" }, "message": "mac80211: allow GO to scan like AP\n\nThere\u0027s no point in disallowing scanning for a\nGO interface when it\u0027s not beaconing yet.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eeabee7e53f6fb5e63027519982b19616e8f166e", "tree": "a614d9ac017bed033d14505fe47d938ae307c27a", "parents": [ "75abde4d193fe300a2c1d3ee7f632eb777aa48b2" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Fri Jan 28 10:20:47 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Feb 03 16:38:26 2011 -0500" }, "message": "mac80211: Be more careful when changing channels.\n\nIf we cannot set the channel type, set the channel back to the\noriginal.\n\nDon\u0027t update the driver hardware if nothing actually changed.\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4334ec8518cec3f7a4feeb3dacb46acfb24904d4", "tree": "e00b87af0dc841a5bd2cf2af4fc0de7adeeaaff7", "parents": [ "ff458edc0c5ec42b299547fb7eb9790a4aecc632" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Feb 02 16:58:06 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Feb 02 16:38:59 2011 -0500" }, "message": "mac80211: fix TX status cookie in HW offload case\n\nWhen the off-channel TX is done with remain-on-channel\noffloaded to hardware, the reported cookie is wrong as\nin that case we shouldn\u0027t use the SKB as the cookie but\nneed to instead use the corresponding r-o-c cookie\n(XOR\u0027ed with 2 to prevent API mismatches).\n\nFix this by keeping track of the hw_roc_skb pointer\njust for the status processing and use the correct\ncookie to report in this case. We can\u0027t use the\nhw_roc_skb pointer itself because it is NULL\u0027ed when\nthe frame is transmitted to prevent it being used\ntwice.\n\nThis fixes a bug where the P2P state machine in the\nsupplicant gets stuck because it never gets a correct\nresult for its transmitted frame.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "90fc4b3a5ba24f09af2a8c4a723651a328949460", "tree": "0ec7031f451f8a7eb38259b6fe80ec52cf780b43", "parents": [ "21f83589644bb2ed98079bf1e2154c8e70ca6a6c" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Sat Dec 18 17:20:48 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jan 05 16:07:12 2011 -0500" }, "message": "mac80211: implement off-channel TX using hw r-o-c offload\n\nWhen the driver has remain-on-channel offload,\nimplement off-channel transmission using that\nprimitive.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "21f83589644bb2ed98079bf1e2154c8e70ca6a6c", "tree": "ede391a8c788a43f7c4ea3baa3367e020d45f179", "parents": [ "c96e96354a6c9456cdf1f150eca504e2ea35301e" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Sat Dec 18 17:20:47 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jan 05 16:07:12 2011 -0500" }, "message": "mac80211: implement hardware offload for remain-on-channel\n\nThis allows drivers to support remain-on-channel\noffload if they implement smarter timing or need\nto use a device implementation like iwlwifi.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c7108a7111cd9e592d6ad498be37276dbea75d2b", "tree": "dab25dbb5607c4151629bf747ee10b4487772419", "parents": [ "c80d545da3f7c0e534ccd4a780f322f80a92cff1" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:50 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:58 2010 -0500" }, "message": "mac80211: Send mesh non-HWMP path selection frames to userspace\n\nLet path selection frames for protocols other than HWMP be sent to\nuserspace via NL80211_CMD_REGISTER_FRAME. Also allow userspace to send\nand receive mesh path selection frames.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c80d545da3f7c0e534ccd4a780f322f80a92cff1", "tree": "edd5c51676b4677fc1a0b2fc692ffe97df863f25", "parents": [ "24bdd9f4c9af75b33b438d60381a67626de0128d" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:49 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:57 2010 -0500" }, "message": "mac80211: Let userspace enable and configure vendor specific path selection.\n\nUserspace will now be allowed to toggle between the default path\nselection algorithm (HWMP, implemented in the kernel), and a vendor\nspecific alternative. Also in the same patch, allow userspace to add\ninformation elements to mesh beacons. This is accordance with the\nExtensible Path Selection Framework specified in version 7.0 of the\n802.11s draft.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24bdd9f4c9af75b33b438d60381a67626de0128d", "tree": "f5ff8c4f9ec2a7cdb976f419532179f2c46b06e8", "parents": [ "8a09d6d80c90c02f2f8c89f69c702cab0c8d9b42" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:48 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:57 2010 -0500" }, "message": "mac80211: Rename mesh_params to mesh_config to prepare for mesh_setup\n\nMesh parameters can be to setup a mesh or to configure it.\nThis patch renames the ambiguous name mesh_params to mesh_config\nin preparation for mesh_setup.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f7e0104c1a4e77cc4f23d5969b0677bdc4f62c63", "tree": "6d1622ec2f6152b611867df1b7a0269471655b53", "parents": [ "dbd2fd656f2060abfd3a16257f8b51ec60f6d2ed" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Dec 09 19:49:02 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 13 15:23:29 2010 -0500" }, "message": "mac80211: support separate default keys\n\nAdd support for split default keys (unicast\nand multicast) in mac80211.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dbd2fd656f2060abfd3a16257f8b51ec60f6d2ed", "tree": "71e61430bd8593f2ad8f1c741b5a8a8be4a9d690", "parents": [ "897bed8b4320774e56f282cdc1cceb4d77442797" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Dec 09 19:58:59 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 13 15:23:28 2010 -0500" }, "message": "cfg80211/nl80211: separate unicast/multicast default TX keys\n\nAllow userspace to specify that a given key\nis default only for unicast and/or multicast\ntransmissions. Only WEP keys are for both,\nWPA/RSN keys set here are GTKs for multicast\nonly. For more future flexibility, allow to\nspecify all combiations.\n\nWireless extensions can only set both so use\nnl80211; WEP keys (connect keys) must be set\nas default for both (but 802.1X WEP is still\npossible).\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "80d7e403c97b712e302ec37e9beceff1dbdc9402", "tree": "43c158c73afe35160fc7b5415e7f1cac821b1689", "parents": [ "50b12f597be354a5a224f05c65c54c0667e57aec" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Fri Nov 19 12:40:26 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 08 15:38:43 2010 -0500" }, "message": "mac80211: Apply ht_opmode changes in ieee80211_change_bss\n\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "541a45a142df281c974d74eac2066138fc107b23", "tree": "b96f4808c3f17f2f560db9569ca2b08dba9eab67", "parents": [ "22de94de7de78b8de2fb1f2df5aa85b5556cfcfd" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 02 19:12:43 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 07 16:09:12 2010 -0500" }, "message": "nl80211/mac80211: Report signal average\n\nExtend nl80211 to report an exponential weighted moving average (EWMA) of the\nsignal value. Since the signal value usually fluctuates between different\npackets, an average can be more useful than the value of the last packet.\n\nThis uses the recently added generic EWMA library function.\n\n--\nv2:\tfix ABI breakage and change factor to be a power of 2.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "29cbe68c516a48a9a88b3226878570c6cbd83c02", "tree": "4774f8a3a244236234a521baa4d1ae5b3e1494ba", "parents": [ "bd90fdcc5fbd99a2a778999610420cf793bd1be2" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Dec 03 09:20:44 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:29 2010 -0500" }, "message": "cfg80211/mac80211: add mesh join/leave commands\n\nInstead of tying mesh activity to interface up,\nadd join and leave commands for mesh. Since we\nmust be backward compatible, let cfg80211 handle\njoining a mesh if a mesh ID was pre-configured\nwhen the device goes up.\n\nNote that this therefore must modify mac80211 as\nwell since mac80211 needs to lose the logic to\nstart the mesh on interface up.\n\nWe now allow querying mesh parameters before the\nmesh is connected, which simply returns defaults.\nSetting them (internally renamed to \"update\") is\nonly allowed while connected. Specify them with\nthe new mesh join command instead where needed.\n\nIn mac80211, beaconing must now also follow the\nmesh enabled/not enabled state, which is done\nby testing the mesh ID.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f9e10ce4cf86945eb5efcab31284c971877ed012", "tree": "a56ec8ed84019901bf92aa969e366afb8b8ce36b", "parents": [ "09b174702601079c3a04806754be30ffbd70db4d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Dec 03 09:20:42 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:28 2010 -0500" }, "message": "cfg80211: require add_virtual_intf to return new dev\n\ncfg80211 used to do all its bookkeeping in\nthe notifier, but some new stuff will have\nto use local variables so make the callback\nreturn the netdev pointer.\n\nTested-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "45904f21655cf4f0ae7d0fab5906fe51bf56ecf4", "tree": "fd023d65b881b6cfcf1529eed7c1ad2523c166e1", "parents": [ "b9e61f11f47035e3b4545b51fb547fef48eb3096" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Fri Dec 03 09:20:40 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:28 2010 -0500" }, "message": "nl80211/mac80211: define and allow configuring mesh element TTL\n\nThe TTL in path selection information elements is different from\nthe mesh ttl used in mesh data frames. Version 7.03 of the 11s\ndraft calls this ttl \u0027Element TTL\u0027.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f30221e4ec62d905b56d5e8f7ccab6b406a97cf5", "tree": "07d3a4cf6da15a3622dd79c1d72e0e5c9201566a", "parents": [ "f7ca38dfe58c20cb1aa2ed9643187e8b194b5bae" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Nov 25 10:02:30 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 29 15:24:35 2010 -0500" }, "message": "mac80211: implement off-channel mgmt TX\n\nThis implements the new off-channel TX API\nin mac80211 with a new work item type. The\noperation doesn\u0027t add a new work item when\nwe\u0027re on the right channel and there\u0027s no\nwait time so that for example p2p probe\nresponses will be transmitted without delay.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f7ca38dfe58c20cb1aa2ed9643187e8b194b5bae", "tree": "42db54588fd5fa769a16def75708117903577b40", "parents": [ "9a67d761b39614c0495dcab9a204e21a9f4c4d31" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Nov 25 10:02:29 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 29 15:24:35 2010 -0500" }, "message": "nl80211/cfg80211: extend mgmt-tx API for off-channel\n\nWith p2p, it is sometimes necessary to transmit\na frame (typically an action frame) on another\nchannel than the current channel. Enable this\nthrough the CMD_FRAME API, and allow it to wait\nfor a response. A new command allows that wait\nto be aborted.\n\nHowever, allow userspace to specify whether or\nnot it wants to allow off-channel TX, it may\nactually want to use the same channel only.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ccb14354017272ddac002e859a2711610b6af174", "tree": "fa39f9b944508e596763c49b0088dc1cc2e263ca", "parents": [ "f8afa42b01c7a9f45b7cbaadb0481a0eeb96f18d" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:18:36 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:18:36 2010 -0500" }, "message": "Revert \"nl80211/mac80211: Report signal average\"\n\nThis reverts commit 86107fd170bc379869250eb7e1bd393a3a70e8ae.\n\nThis patch inadvertantly changed the userland ABI.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "86107fd170bc379869250eb7e1bd393a3a70e8ae", "tree": "579ee24be87e94246450420f4de57d8eda942848", "parents": [ "eef39befaae2a1559efe197d795c376a317af2af" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Tue Nov 16 10:58:48 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 18 14:22:20 2010 -0500" }, "message": "nl80211/mac80211: Report signal average\n\nExtend nl80211 to report an exponential weighted moving average (EWMA) of the\nsignal value. Since the signal value usually fluctuates between different\npackets, an average can be more useful than the value of the last packet.\n\nThis uses the recently added generic EWMA library function.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "15d967532148a5fcda075282b82a271b6595a386", "tree": "e1913502e74768e685f6793b1d24426ac849b1da", "parents": [ "afe0cbf87500f0585d217deb8c6fd329793a7957" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Nov 10 12:50:56 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:37:05 2010 -0500" }, "message": "mac80211: Add antenna configuration\n\nAllow antenna configuration by calling driver\u0027s function for it.\n\nWe disallow antenna configuration if the wiphy is already running, mainly to\nmake life easier for 802.11n drivers which need to recalculate HT capabilites.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f23a478075659db8a4fd62fa6e264a8bb052cc5b", "tree": "ba1492a4a781770644359b88e8ca2d8d3a00adc2", "parents": [ "ca4a0831917d6541b45f03542257fcb20dc9cf4a" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Mon Nov 08 11:51:06 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:37:04 2010 -0500" }, "message": "mac80211: support hardware TX fragmentation offload\n\nThe lower driver is notified when the fragmentation threshold changes\nand upon a reconfig of the interface.\n\nIf the driver supports hardware TX fragmentation, don\u0027t fragment\npackets in the stack.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7be5086d4cb7cceb71d724a9524d5e927785d04f", "tree": "eaf0b7d527b9b91c704c8f339d855923c0a34571", "parents": [ "271733cf844a2f5f186ef3b40c26d6397b71039a" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Oct 13 12:06:24 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Oct 13 15:45:22 2010 -0400" }, "message": "mac80211: add probe request filter flag\n\nUsing the frame registration notification, we\ncan see when probe requests are requested and\nnotify the low-level driver via filtering. The\nflag is also set in AP and IBSS modes.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5a5c731aa59cc2c44ca20f45b1a577cd4f5435e2", "tree": "c5f45cd0e014bbaf600fe172ebbd117ca2737bbb", "parents": [ "b38afa87698375179026224522c2e48dcbf17e65" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Thu Oct 07 16:39:20 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 11 15:04:19 2010 -0400" }, "message": "wireless: Set some stats used by /proc/net/wireless (wext)\n\nSome stats for /proc/net/wireless (and wext in general) are not\nbeing set. This patch addresses a few of those with values easily\nobtained from mac80211 core.\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "388ac775be95e510c2095ed6cd59422a5183a9fb", "tree": "bbdb6f1b5aa46ec8ebb5c1eccdd4934082a66094", "parents": [ "43b19952de54b0fccfcdc5968891ebe550367fe8" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Oct 07 13:11:09 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Oct 07 14:41:28 2010 -0400" }, "message": "cfg80211: constify WDS address\n\nThere\u0027s no need for the WDS peer address\nto not be const, so make it const.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b206b4ef062d83c0875a085672ed50e8c8b01521", "tree": "f182cc272055f7b646bc62a5d37fb097a8fd07cc", "parents": [ "09be251e9005ebd67e5eabcaad904edb7ecacc55" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Oct 06 18:34:12 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Oct 06 16:30:43 2010 -0400" }, "message": "nl80211/mac80211: Add retry and failed transmission count to station info\n\nThis information is already available in mac80211, we just need to export it\nvia cfg80211 and nl80211.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e31b82136d1adc7a599b6e99d3321e5831841f5a", "tree": "c72d78d4cccfd08587e909c7efe59956f1cbc23e", "parents": [ "53f73c09d64f1fa7d7e6e8b6bb7468d42eddc92d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Oct 05 19:39:30 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Oct 06 16:30:40 2010 -0400" }, "message": "cfg80211/mac80211: allow per-station GTKs\n\nThis adds API to allow adding per-station GTKs,\nupdates mac80211 to support it, and also allows\ndrivers to remove a key from hwaccel again when\nthis may be necessary due to multiple GTKs.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "025e6be220e448c02045e8499c7db8ce4bc8eea2", "tree": "0b28807104e80926d33eec8634dd94c5561e64ab", "parents": [ "6774889314ba507483e63c014fcb81adfc127202" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Oct 05 10:41:47 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:37:51 2010 -0400" }, "message": "mac80211: fix deadlock with multiple interfaces\n\nThe locking around ieee80211_recalc_smps is\nbuggy -- it cannot acquire another interface\u0027s\nmutex while the iflist mutex is held because\nanother code path could be holding the iface\nmutex and trying to acquire the iflist mutex.\n\nBut the locking is also unnecessary, we only\ncheck \"ifmgd-\u003eassociated\" as a bool, and don\u0027t\nuse the pointer (in check_mgd_smps).\n\nReported-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "663fcafd977f13e6483f7d4cf2ccdbc4fae81ed0", "tree": "b1c74fe389dff24d94c95eaeb3a52932f6671007", "parents": [ "4bd530f3ab51c7d656bca29d927a50e5aa87175e" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 30 21:06:09 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:23 2010 -0400" }, "message": "cfg80211/mac80211: allow management frame TX in AP mode\n\nEnable management frame transmission and subscribing\nto management frames through nl80211 in both cfg80211\nand mac80211. Also update a few places that I forgot\nto update for P2P-client mode previously, and fix a\nsmall bug with non-action frames in this API.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "85416a4fa193754ef36e12b20bb02fe661cb7f17", "tree": "45228e888bd76a5f1251c55ea28377ddedfe2914", "parents": [ "5a254ffe3ffdfa84fe076009bd8e88da412180d2" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Sat Oct 02 13:17:07 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:21 2010 -0400" }, "message": "mac80211: fix rx monitor filter refcounters\n\nThis patch fixes an refcounting bug. Previously it\nwas possible to corrupt the per-device recv. filter\nand monitor management counters when:\n\tiw dev wlanX set monitor [new flags]\nwas issued on an active monitor interface.\n\nAcked-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2ca27bcff7127da1aa7dd39cd2a6f7cb187e327f", "tree": "fae1b81c56763a53d432310b8fcbb81b9bb48d7e", "parents": [ "074ac8df9f93f2a35a356d92fd7f16cd846f0a03" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 16 14:58:23 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Sep 16 15:46:07 2010 -0400" }, "message": "mac80211: add p2p device type support\n\nWhen a driver advertises p2p device support,\nmac80211 will handle it, but internally it will\nrewrite the interface type to STA/AP rather than\nP2P-STA/GO since otherwise a lot of paths need\nto be touched that are otherwise identical. A\np2p boolean tells drivers whether or not a given\ninterface will be used for p2p or not.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f5521b13880f4f4f612e1d20dd4f565122d16e04", "tree": "c8e4161bce9af2d38b250e0427fb6c9f2cb881bf", "parents": [ "3905751243fd84340e027672d2f603e9009d490e" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Sep 14 22:06:53 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Sep 16 15:45:58 2010 -0400" }, "message": "mac80211: use correct station flags lock\n\nThis code is modifying the station flags, and\nas such should hold the flags lock so it can\ndo so atomically vs. other flags modifications\nand readers. This issue was introduced when\nthis code was added in eccb8e8f, as it used\nthe wrong lock (thus not fixing the race that\nwas previously documented in a comment.)\n\nCc: stable@kernel.org [2.6.31+]\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "34d4bc4d41d282a66dafe1b01a7d46bad468cefb", "tree": "ac0936b00f1ebd037be32fd0e5f304f26366e6c0", "parents": [ "87490f6db38999fee7f6d3dbecc5b94730c7e010" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Aug 27 12:35:58 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 27 13:53:31 2010 -0400" }, "message": "mac80211: support runtime interface type changes\n\nAdd support to mac80211 for changing the interface\ntype even when the interface is UP, if the driver\nsupports it.\n\nTo achieve this\n * add a new driver callback for switching,\n * split some of the interface up/down code out\n into new functions (do_open/do_stop), and\n * maintain an own __SDATA_RUNNING bit that will\n not be set during interface type, so that any\n other code doesn\u0027t use the interface.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "26a58456be40d8181b884eb5b4e61e3f73ba94e0", "tree": "d3284dcba4f286d1f666b1efca136c018791e692", "parents": [ "b9dcf712d1fb98bf279fcd453a42a763b104961d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Aug 27 12:35:55 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 27 13:53:30 2010 -0400" }, "message": "mac80211: switch to ieee80211_sdata_running\n\nSince the introduction of ieee80211_sdata_running(),\nsome new code was introduced that uses netif_running()\ninstead. Switch all these instances over.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3ffc2a905b1faae4c0fe39d66f0752c3a4cbb3c7", "tree": "d50902e1e171877e4fb034e36c837f16984ab9b4", "parents": [ "7d64b7cc1fc33bab24567903a93f699d11649c0b" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Aug 27 14:26:52 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 27 13:27:07 2010 -0400" }, "message": "mac80211: allow vendor specific cipher suites\n\nAllow drivers to specify their own set of cipher\nsuites to advertise vendor-specific ciphers. The\ndriver is then required to implement hardware\ncrypto offload for it.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5eb5a52da6ef04604cf8faca43ec670f69f417d3", "tree": "4d3397d83cb533ba4fa8dd47b884305c877b01d7", "parents": [ "45f7e3116fad77e6dd15cb0e2eaccb7de7b806c9" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Aug 25 14:34:01 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 25 14:34:56 2010 -0400" }, "message": "mac80211: fix mesh advertisement\n\nWhen a mac80211-based driver advertises mesh mode\nsupport, this will be advertised to userspace.\nHowever, if mac80211 was compiled without mesh\nsupport, then that won\u0027t actually be true. Fix\nthis by removing the bit for mesh if mesh isn\u0027t\ncompiled in.\n\nSince this synchronizes what we advertise to\ncfg80211 and actually support, it means we can\nnow rely on cfg80211\u0027s interface type checks\nand need not check again in mac80211.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0fb9a9ec27718fbf7fa3153bc94becefb716ceeb", "tree": "8f5d6a5fa9f2c6b8b08273dc198d6187d0a70361", "parents": [ "b62177a0aa0521fd07cd7501534c0c3b256ebce6" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Fri Aug 20 16:25:38 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 25 14:33:17 2010 -0400" }, "message": "net/mac80211: Use wiphy_\u003clevel\u003e\n\nStandardize logging messages from\n\tprintk(KERN_\u003clevel\u003e \"%s: \" fmt , wiphy_name(foo), args);\nto\n\twiphy_\u003clevel\u003e(foo, fmt, args);\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2e161f78e5f63a7f9fd25a766bb7f816a01eb14a", "tree": "befd44feeb1f47da1f41e6fc310a223ad67030ff", "parents": [ "ac4c977d16d843f12901595c91773dddb65768a9" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Aug 12 15:38:38 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Aug 24 16:27:56 2010 -0400" }, "message": "cfg80211/mac80211: extensible frame processing\n\nAllow userspace to register for more than just\naction frames by giving the frame subtype, and\nmake it possible to use this in various modes\nas well.\n\nWith some tweaks and some added functionality\nthis will, in the future, also be usable in AP\nmode and be able to replace the cooked monitor\ninterface currently used in that case.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ac4c977d16d843f12901595c91773dddb65768a9", "tree": "81fdd35a49a82b810a5e42c22e49e9952930aec1", "parents": [ "633adf1ad1c92c02bd3f10bbd73737a969179378" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Aug 12 15:37:29 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Aug 24 16:27:55 2010 -0400" }, "message": "mac80211: remove unused don\u0027t-encrypt flag\n\nWhen MFP is disabled, action frames will not\nbe encrypted since they are management frames\nand the only management frames that can then\nbe encrypted are authentication frames.\n\nTherefore, setting the don\u0027t-encrypt flag on\naction frames is unnecessary.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "97359d1235eaf634fe706c9faa6e40181cc95fb8", "tree": "5799455c94622eaa6a4fb065bd3b5c350bb705e0", "parents": [ "915a824e30c503157c38115eb6a85f60bb653738" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Aug 10 09:46:38 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 16 16:45:11 2010 -0400" }, "message": "mac80211: use cipher suite selectors\n\nCurrently, mac80211 translates the cfg80211\ncipher suite selectors into ALG_* values.\nThat isn\u0027t all too useful, and some drivers\nbenefit from the distinction between WEP40\nand WEP104 as well. Therefore, convert it\nall to use the cipher suite selectors.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nAcked-by: Gertjan van Wingerde \u003cgwingerde@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1ac62ba7c985109868a18d959986425148481f47", "tree": "35504e08e075978f7dcdd791bdfa2fab132b778a", "parents": [ "a85d7cca1204f2dba86d2f61693f0fe8c48f0fa5" ], "author": { "name": "Ben Hutchings", "email": "ben@decadent.org.uk", "time": "Sun Aug 01 17:37:03 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 16 15:26:38 2010 -0400" }, "message": "mac80211: Don\u0027t squash error codes in key setup functions\n\nieee80211_add_key() currently returns -ENOMEM in case of any error,\nincluding a missing crypto algorithm. Change ieee80211_key_alloc()\nand ieee80211_aes_{key_setup_encrypt,cmac_key_setup}() to encode\nerrors with ERR_PTR() rather than returning NULL, and change\nieee80211_add_key() accordingly.\n\nCompile-tested only.\n\nReported-by: Marcin Owsiany \u003cporridge@debian.org\u003e\nSigned-off-by: Ben Hutchings \u003cben@decadent.org.uk\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ae3568adf42d5d3bb3cfa505b94351c5d1ce4924", "tree": "112865a6e6b1e4ddf70362f3efb295c495ec85b9", "parents": [ "7f3e01fee41a322747db2d7574516d9fbd3785c0", "b7753c8cd51dce67a0b152efb456a21ff1cc241b" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jul 29 14:47:07 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jul 29 14:47:07 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n" }, { "commit": "bb7e95c8fd859922c6cf3ebbb3a8546007df1748", "tree": "58b54c6306ba168b76f25cc6dc9a2d1d2eb830a7", "parents": [ "b8bc0421ab7f83712a0a8ef7eb05fa73ec53c027", "5447080cfa3c77154498dfbf225367ac85b4c2b5" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jul 27 21:01:35 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jul 27 21:01:35 2010 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/bnx2x_main.c\n\nMerge bnx2x bug fixes in by hand... :-/\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "32162a4dab0e6a4ca7f886a01173b5f9b80843be", "tree": "a8337e9b9788b787c13241ec9a9642527d5aad6a", "parents": [ "1b2fb7dc71c1f8f97663c2da84fa1c8183588474" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Mon Jul 26 15:52:03 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 27 14:59:58 2010 -0400" }, "message": "mac80211: Fix key freeing to handle unlinked keys\n\nKey locking simplification removed key-\u003esdata !\u003d NULL verification from\nieee80211_key_free(). While that is fine for most use cases, there is one\npath where this function can be called with an unlinked key (i.e.,\nkey-\u003esdata \u003d\u003d NULL \u0026\u0026 key-\u003elocal \u003d\u003d NULL). This results in a NULL pointer\ndereference with the current implementation. This is known to happen at\nleast with FT protocol when wpa_supplicant tries to configure the key\nbefore association.\n\nAvoid the issue by passing in the local pointer to\nieee80211_key_free(). In addition, do not clear the key from hw_accel\nor debugfs if it has not yet been added. At least the hw_accel one could\ntrigger another NULL pointer dereference.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "800f65bba8d2030b3fef62850e203f9f176625a8", "tree": "6507c4fe7a0826c253b4afb29375ab306a0fd9c8", "parents": [ "06b3cda0c12986f5bba578b918b188d731c4e191", "b3190df628617c7a4f188a9465aeabe1f5761933" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 27 11:59:19 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 27 11:59:19 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-commands.h\n" }, { "commit": "66c524210ab9217528b01b63c43903545e03a58c", "tree": "3d3f519fc5f0230618fca12012b851bfd76947fb", "parents": [ "f9f9b6e3e3128e2b4d01a6e5ed0bb73cbb9a0a37" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Jul 22 13:58:51 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 26 15:32:41 2010 -0400" }, "message": "mac80211: remove bogus rcu_read_lock()\n\nAnother remnant of the previous key locking scheme\nneeds to be removed -- this causes a warning\notherwise as ieee80211_set_default_mgmt_key will\nacquire a mutex.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2a88e7e559f2358f4e1422d0b0c0278a74136581", "tree": "b4e9e56dbde79fe7185cba511a1ffd85f5d2018e", "parents": [ "344e0f623cec5eba273db06fe57db080988d6b26", "7a17a33c0da37f8d24222c967550d19dabf13617" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Jul 23 14:03:38 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Jul 23 14:03:38 2010 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-commands.h\n" }, { "commit": "4ced3f74dae18715920cb680098ec7ff4345d0a3", "tree": "4a1b35285921fb25e01363af48a8c7db7423098d", "parents": [ "875ae5f68883c75aad826e715df8ec0619551a07" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Jul 19 16:39:04 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 20 16:02:58 2010 -0400" }, "message": "mac80211: move QoS-enable to BSS info\n\nEver since\n\ncommit e1b3ec1a2a336c328c336cfa5485a5f0484cc90d\nAuthor: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nDate: Mon Mar 29 12:18:34 2010 +0200\n\n mac80211: explicitly disable/enable QoS\n\nmac80211 is telling drivers, in particular\niwlwifi, whether QoS is enabled or not.\n\nHowever, this is only relevant for station mode,\nsince only then will any device send nullfunc\nframes and need to know whether they should be\nQoS frames or not. In other modes, there are\n(currently) no frames the device is supposed to\nsend.\n\nWhen you now consider virtual interfaces, it\nbecomes apparent that the current mechanism is\ninadequate since it enables/disables QoS on a\nglobal scale, where for nullfunc frames it has\nto be on a per-interface scale.\n\nDue to the above considerations, we can change\nthe way mac80211 advertises the QoS state to\ndrivers to only ever advertise it as \"off\" in\nstation mode, and make it a per-BSS setting.\n\nTested-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "06ee1c261360545c97fd836fff9dbd10ebd9301b", "tree": "21a144e09d83db9afb374f4a331aea6c4dec15a8", "parents": [ "9acd56d3f2a05191ee369cbdd8c37dd547aa19b8" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 19 11:52:59 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 20 15:55:12 2010 -0400" }, "message": "wireless: use netif_rx_ni in ieee80211_send_layer2_update\n\nThese synthetic frames are all triggered from userland requests in\nprocess context.\n\nhttps://bugzilla.kernel.org/show_bug.cgi?id\u003d16412\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e300d955debdadf599c36e47eb0bc16f5976215c", "tree": "8fafcc789dc06e90665e6eee6388af228bbd2fd7", "parents": [ "242647bcf8464860f173f3d4d4ab3490d3558518", "815868e7b5c207ba42d5b317ccc51f8112732268" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 13 15:57:29 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 13 15:57:29 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/wl12xx/wl1271_cmd.h\n" }, { "commit": "3473187d2459a078e00e5fac8aafc30af69c57fa", "tree": "93c3da6dbcbfd09ea81884bee790219d4cee0d56", "parents": [ "73e194639d90594d06d0c10019c0ab4638869135" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jul 07 15:07:49 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jul 08 16:35:50 2010 -0400" }, "message": "mac80211: remove wep dependency\n\nThe current mac80211 code assumes that WEP is always available. If WEP\nfails to initialize, ieee80211_register_hw will always fail.\n\nIn some cases (e.g. FIPS certification), the cryptography used by WEP is\nunavailable. However, in such cases there is no good reason why CCMP\nencryption (or even no link level encryption) cannot be used. So, this\npatch removes mac80211\u0027s assumption that WEP (and TKIP) will always be\navailable for use.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "05318bc905467237d4aa68a701f6e92a2b332218", "tree": "3b7577383bca50aeb442568aa16cf8f2167b8694", "parents": [ "ea812ca1b06113597adcd8e70c0f84a413d97544", "88c1f4f6dffe66e2fed8e7e3276e091ee850bed0" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jul 01 17:34:14 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jul 01 17:34:14 2010 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n\nConflicts:\n\tdrivers/net/wireless/libertas/host.h\n" }, { "commit": "ff3074a4dd6c0963e6a7eaac48175a62f589c143", "tree": "44058b9aaf1e3c9dc15531847f5c748821eeccfb", "parents": [ "38bdb650f902d275d6b2f9c2d8247fd960525583" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jun 29 13:55:04 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jun 29 13:55:04 2010 -0400" }, "message": "mac80211: remove unnecessary check in ieee80211_dump_survey\n\nThis check is duplicated in drv_get_survey.\n\nReported-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fa61cf70a6ae1089e459e4b59b2e8d8e90d8535e", "tree": "1bd81709faaa15fb207de7db4df1ceed96374208", "parents": [ "a185045c8da1ec6627236b4ade0d949b15da43b3" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Wed Jun 23 12:12:37 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jun 24 15:42:33 2010 -0400" }, "message": "cfg80211/mac80211: Update set_tx_power to use mBm instead of dBm units\n\nIn preparation for a TX power setting interface in the nl80211, change the\n.set_tx_power function to use mBm units instead of dBm for greater accuracy and\nsmaller power levels.\n\nAlso, already in advance move the tx_power_setting enumeration to nl80211.\n\nThis change affects the .tx_set_power function prototype. As a result, the\ncorresponding changes are needed to modules using it. These are mac80211,\niwmc3200wifi and rndis_wlan.\n\nCc: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nCc: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nAcked-by: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nAcked-by: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bb9c03d8a6893517737b16fdbeb54be3c73b3023", "tree": "35fa0d1defaaf94641963a49126d7bb475ffa4c6", "parents": [ "4de57826810fd2cfeb2ab5c7d003ff9116b8f7ee", "abf52f86aa0a49a7377350cafa8f218c4cd227e7" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jun 17 14:19:06 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jun 17 14:19:06 2010 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "ff61638105db6f5832ef8700436ba6aa6d3a2fda", "tree": "ff55ef6186cd46d87ca4e54efbbe82f5ecc68f1e", "parents": [ "685429623f88d84f98bd5daffc3c427c408740d4" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Wed Jun 09 09:51:52 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jun 15 16:00:48 2010 -0400" }, "message": "mac80211: Fix ps-qos network latency handling\n\nThe ps-qos latency handling is broken. It uses predetermined latency values\nto select specific dynamic PS timeouts. With common AP configurations, these\nvalues overlap with beacon interval and are therefore essentially useless\n(for network latencies less than the beacon interval, PSM is disabled.)\n\nThis patch remedies the problem by replacing the predetermined network latency\nvalues with one high value (1900ms) which is used to go trigger full psm. For\nbackwards compatibility, the value 2000ms is still mapped to a dynamic ps\ntimeout of 100ms.\n\nCurrently also the mac80211 internal value for storing user space configured\ndynamic PSM values is incorrectly in the driver visible ieee80211_conf struct.\nMove it to the ieee80211_local struct.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9d38d85de0270e3927bffab94973a9c78d1dc800", "tree": "31bc0111445ce78e2c373954d3b0fbce7cbb63ba", "parents": [ "aa9746af8fa26d28d442a7415c701eb5dfeb7a2a" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Jun 09 17:20:33 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jun 14 15:38:16 2010 -0400" }, "message": "cfg80211/mac80211: allow action frame TX/RX in IBSS\n\nWhen in IBSS mode, currently action frame TX and RX\ncannot be used. Allow using it to talk to any peer,\nor for public action frames. Also, while at it,\nrestructure the code in mac80211 to make it easier\nto add this for other interface types in the future.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "14599f1e341ee219abdd15f4eee5872d6f2d29f1", "tree": "3875181429010e58416ab34e6c06ef42de52e756", "parents": [ "d8d1f30b95a635dbd610dcc5eb641aca8f4768cf", "832c10fd733893f86c63bde1c65b005d5a2fe346" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Jun 11 11:34:06 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Jun 11 11:34:06 2010 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n\nConflicts:\n\tdrivers/net/wireless/wl12xx/wl1271.h\n\tdrivers/net/wireless/wl12xx/wl1271_cmd.h\n" }, { "commit": "ad0e2b5a00dbec303e4682b403bb6703d11dcdb2", "tree": "b7aeb06a284af0cfb4aa1de840592478b373f554", "parents": [ "efe4c457a1d4e56840c42bf2e409dc04e8ad4304" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Jun 01 10:19:19 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jun 03 14:10:46 2010 -0400" }, "message": "mac80211: simplify key locking\n\nSince I recently made station management able\nto sleep, I can now rework key management as\nwell; since it will no longer need a spinlock\nand can also use a mutex instead, a bunch of\ncode to allow drivers\u0027 set_key to sleep while\nkey management is protected by a spinlock can\nnow be removed.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bc10502dba37d3b210efd9f3867212298f13b78e", "tree": "af4542eaab79cd509244578f839167f16f3ab02d", "parents": [ "ba2d3587912f82d1ab4367975b1df460db60fb1e" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Thu Jun 03 03:21:52 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jun 03 03:21:52 2010 -0700" }, "message": "net: use __packed annotation\n\ncleanup patch.\n\nUse new __packed annotation in net/ and include/\n(except netfilter)\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "252aa631f88080920a7083ac5a5844ffc5463629", "tree": "e1482e9cf7c7230acb9ed33c8a24687e48dc7aa1", "parents": [ "4f424867dd4752d457458fec29ca57ce5d7dc4ac" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed May 19 12:17:12 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 02 16:13:27 2010 -0400" }, "message": "cfg80211: make action channel type optional\n\nWhen sending action frames, we want to verify\nthat we do that on the correct channel. However,\nchecking the channel type in addition can get in\nthe way, since the channel type could change on\nthe fly during an association, and it\u0027s not\nuseful to have the channel type anyway since it\nhas no effect on the transmission. Therefore,\nmake it optional to specify so that if wanted,\nit can still be checked, but is not required.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cc755896a4274f11283bca32d1d658203844057a", "tree": "218970ece71df99f686b9416b7fd88b921690ebb", "parents": [ "d250fe91ae129bff0968e685cc9c466d3a5e3482", "9459d59fbf0bc82ff4c804679fa8bc22788eca63" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue May 11 14:24:55 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue May 11 14:24:55 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/ath/ar9170/main.c\n" }, { "commit": "0aaffa9b9699894aab3266195a529baf9f96ac29", "tree": "26fe5f5277ac6d7061ea723f92d4038b0c28b0b8", "parents": [ "f444de05d20e27cdd960c13fcbcfca3099f03143" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed May 05 15:28:27 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 07 14:55:51 2010 -0400" }, "message": "mac80211: improve HT channel handling\n\nCurrently, when one interface switches HT mode,\nall others will follow along. This is clearly\nundesirable, since the new one might switch to\nno-HT while another one is operating in HT.\n\nAddress this issue by keeping track of the HT\nmode per interface, and allowing only changes\nthat are compatible, i.e. switching into HT40+\nis not possible when another interface is in\nHT40-, in that case the second one needs to\nfall back to HT20.\n\nAlso, to allow drivers to know what\u0027s going on,\nstore the per-interface HT mode (channel type)\nin the virtual interface\u0027s bss_conf.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f444de05d20e27cdd960c13fcbcfca3099f03143", "tree": "a7fbef60420d88dda5840e06094be21ee3eb1dc0", "parents": [ "ac8dd506e40ee2c7fcc61654a44c32555a0a8d6c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed May 05 15:25:02 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 07 14:55:50 2010 -0400" }, "message": "cfg80211/mac80211: better channel handling\n\nCurrently (all tested with hwsim) you can do stupid\nthings like setting up an AP on a certain channel,\nthen adding another virtual interface and making\nthat associate on another channel -- this will make\nthe beaconing to move channel but obviously without\nthe necessary IEs data update.\n\nIn order to improve this situation, first make the\nconfiguration APIs (cfg80211 and nl80211) aware of\nmulti-channel operation -- we\u0027ll eventually need\nthat in the future anyway. There\u0027s one userland API\nchange and one API addition. The API change is that\nnow SET_WIPHY must be called with virtual interface\nindex rather than only wiphy index in order to take\neffect for that interface -- luckily all current\nusers (hostapd) do that. For monitor interfaces, the\nold setting is preserved, but monitors are always\nslaved to other devices anyway so no guarantees.\n\nThe second userland API change is the introduction\nof a per virtual interface SET_CHANNEL command, that\nhostapd should use going forward to make it easier\nto understand what\u0027s going on (it can automatically\ndetect a kernel with this command).\n\nOther than mac80211, no existing cfg80211 drivers\nare affected by this change because they only allow\na single virtual interface.\n\nmac80211, however, now needs to be aware that the\nchannel settings are per interface now, and needs\nto disallow (for now) real multi-channel operation,\nwhich is another important part of this patch.\n\nOne of the immediate benefits is that you can now\nstart hostapd to operate on a hardware that already\nhas a connection on another virtual interface, as\nlong as you specify the same channel.\n\nNote that two things are left unhandled (this is an\nimprovement -- not a complete fix):\n\n * different HT/no-HT modes\n\n currently you could start an HT AP and then\n connect to a non-HT network on the same channel\n which would configure the hardware for no HT;\n that can be fixed fairly easily\n\n * CSA\n\n An AP we\u0027re connected to on a virtual interface\n might indicate switching channels, and in that\n case we would follow it, regardless of how many\n other interfaces are operating; this requires\n more effort to fix but is pretty rare after all\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "83163244f845c296a118ce85c653872dbff6abfe", "tree": "ce2eac695a1c198f23d537e20ed86c16ece21f7e", "parents": [ "0a12761bcd5646691c5d16dd93df84d1b8849285", "adfba3c7c026a6a5560d2a43fefc9b198cb74462" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 05 16:14:16 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 05 16:14:16 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/libertas_tf/cmd.c\n\tdrivers/net/wireless/libertas_tf/main.c\n" }, { "commit": "195e294d21e88af879da4f88db2ceeb4ec28a755", "tree": "22a75db60cc8743888054460db85eb9a76b0cecb", "parents": [ "3a37495268ab45507b4cab9d4cb18c5496ab7a10" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Tue Apr 27 12:47:40 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 27 16:09:22 2010 -0400" }, "message": "mac80211: Determine dynamic PS timeout based on ps-qos network latency\n\nDetermine the dynamic PS timeout based on the configured ps-qos network\nlatency. For backwards wext compatibility, allow the dynamic PS timeout\nconfigured by the cfg80211 to overrule the automatically determined value.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7b7b5e56d7bdfdd0eb5ea13e6c9613b16b8eac46", "tree": "f0b5a17ac076f75fd90b784a3d7919f7a0b80515", "parents": [ "fd8aaaf3519f3fd3c82594e90bc6808072b94d54" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Apr 27 01:23:36 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 27 16:09:21 2010 -0400" }, "message": "mac80211: implement ap isolation support\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f7917af92024d43bc20bc1afc92de27b0bd0f50b", "tree": "3b88db453d8297cf44694c176ef7129234573bb9", "parents": [ "4f824719a2729f1a6bb78de20c4d3b3dbdd81a09" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Apr 27 00:26:34 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 27 16:09:16 2010 -0400" }, "message": "mac80211: fix handling of 4-address-mode in ieee80211_change_iface\n\nA misplaced interface type check bails out too early if the interface\nis not in monitor mode. This patch moves it to the right place, so that\nit only covers changes to the monitor flags.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3b51cc996e81d8a113416d8094fa4a88f8360a51", "tree": "e75b98b228bb4e456c30673fcc4b56ffa1d09cf5", "parents": [ "c68ed255265968c3948fa2678bf59d15c471b055", "672724403b42da1d276c6cf811e8e34d15efd964" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Apr 23 14:43:45 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Apr 23 14:43:45 2010 -0400" }, "message": "Merge branch \u0027master\u0027 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/ath/ath9k/phy.c\n\tdrivers/net/wireless/iwlwifi/iwl-6000.c\n\tdrivers/net/wireless/iwlwifi/iwl-debugfs.c\n" }, { "commit": "1289723ef238908ca8d95ff48a46ee0de970f882", "tree": "b4d584aee8abcc33dec2039fb45112156d3cd3d0", "parents": [ "03ceedea972a82d343fa5c2528b3952fa9e615d5" ], "author": { "name": "Holger Schurig", "email": "holgerschurig@gmail.com", "time": "Mon Apr 19 10:23:57 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 20 11:50:52 2010 -0400" }, "message": "mac80211: sample survey implementation for mac80211 \u0026 hwsim\n\nThis adds the survey function to both mac80211 itself and to mac80211_hwsim.\nFor the latter driver, we simply invent some noise level.A real driver which\ncannot determine the real channel noise MUST NOT report any noise, especially\nnot a magically conjured one :-)\n\nSigned-off-by: Holger Schurig \u003cholgerschurig@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5c01d5669356e13f0fb468944c1dd4c6a7e978ad", "tree": "fa43345288d7b25fac92b3b35360a177c4947313", "parents": [ "fea069152614cdeefba4b2bf80afcddb9c217fc8", "a5e944f1d955f3819503348426763e21e0413ba6" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 15 16:21:34 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 15 16:21:34 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tDocumentation/feature-removal-schedule.txt\n\tdrivers/net/wireless/ath/ath5k/phy.c\n\tdrivers/net/wireless/wl12xx/wl1271_main.c\n" }, { "commit": "871039f02f8ec4ab2e5e9010718caa8e085786f1", "tree": "f0d2b3127fc48c862967d68c46c2d46668137515", "parents": [ "e4077e018b5ead3de9951fc01d8bf12eeeeeefed", "4a1032faac94ebbf647460ae3e06fc21146eb280" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 11 14:53:53 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 11 14:53:53 2010 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/stmmac/stmmac_main.c\n\tdrivers/net/wireless/wl12xx/wl1271_cmd.c\n\tdrivers/net/wireless/wl12xx/wl1271_main.c\n\tdrivers/net/wireless/wl12xx/wl1271_spi.c\n\tnet/core/ethtool.c\n\tnet/mac80211/scan.c\n" }, { "commit": "17e4ec147f4939ca8c81b41b4261ec7974531381", "tree": "8066952a1dbef6656ac1f6d6a869326576b5006e", "parents": [ "32fbccafed7e935432b601f0453c2b702a385a25" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Mon Mar 29 23:28:30 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 31 14:46:42 2010 -0400" }, "message": "mac80211: Track Beacon signal strength and implement cqm events\n\nCalculate a running average of the signal strength reported for Beacon\nframes and indicate cqm events if the average value moves below or\nabove the configured threshold value (and filter out repetitive events\nwith by using the configured hysteresis).\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0af26b278bc1d747370b451595b7586cb7b3455c", "tree": "2e82d68e3c3f3f873cf855e7cec60de1759d7823", "parents": [ "e61146e36b40fd9d346118c40285913236c329f3" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Mon Mar 29 12:18:36 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 31 14:46:38 2010 -0400" }, "message": "mac80211: enable QoS explicitly in AP mode\n\nEnable QoS explicitly, when user space AP program will setup a QoS\nqueues. Currently this is not needed as iwlwifi not work in AP mode\nand no other driver implement enable/disable QoS.\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5a0e3ad6af8660be21ca98a971cd00f331318c05", "tree": "5bfb7be11a03176a87296a43ac6647975c00a1d1", "parents": [ "ed391f4ebf8f701d3566423ce8f17e614cde9806" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Wed Mar 24 17:04:11 2010 +0900" }, "committer": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Tue Mar 30 22:02:32 2010 +0900" }, "message": "include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h\n\npercpu.h is included by sched.h and module.h and thus ends up being\nincluded when building most .c files. percpu.h includes slab.h which\nin turn includes gfp.h making everything defined by the two files\nuniversally available and complicating inclusion dependencies.\n\npercpu.h -\u003e slab.h dependency is about to be removed. Prepare for\nthis change by updating users of gfp and slab facilities include those\nheaders directly instead of assuming availability. As this conversion\nneeds to touch large number of source files, the following script is\nused as the basis of conversion.\n\n http://userweb.kernel.org/~tj/misc/slabh-sweep.py\n\nThe script does the followings.\n\n* Scan files for gfp and slab usages and update includes such that\n only the necessary includes are there. ie. if only gfp is used,\n gfp.h, if slab is used, slab.h.\n\n* When the script inserts a new include, it looks at the include\n blocks and try to put the new include such that its order conforms\n to its surrounding. It\u0027s put in the include block which contains\n core kernel includes, in the same order that the rest are ordered -\n alphabetical, Christmas tree, rev-Xmas-tree or at the end if there\n doesn\u0027t seem to be any matching order.\n\n* If the script can\u0027t find a place to put a new include (mostly\n because the file doesn\u0027t have fitting include block), it prints out\n an error message indicating which .h file needs to be added to the\n file.\n\nThe conversion was done in the following steps.\n\n1. The initial automatic conversion of all .c files updated slightly\n over 4000 files, deleting around 700 includes and adding ~480 gfp.h\n and ~3000 slab.h inclusions. The script emitted errors for ~400\n files.\n\n2. Each error was manually checked. Some didn\u0027t need the inclusion,\n some needed manual addition while adding it to implementation .h or\n embedding .c file was more appropriate for others. This step added\n inclusions to around 150 files.\n\n3. The script was run again and the output was compared to the edits\n from #2 to make sure no file was left behind.\n\n4. Several build tests were done and a couple of problems were fixed.\n e.g. lib/decompress_*.c used malloc/free() wrappers around slab\n APIs requiring slab.h to be added manually.\n\n5. The script was run on all .h files but without automatically\n editing them as sprinkling gfp.h and slab.h inclusions around .h\n files could easily lead to inclusion dependency hell. Most gfp.h\n inclusion directives were ignored as stuff from gfp.h was usually\n wildly available and often used in preprocessor macros. Each\n slab.h inclusion directive was examined and added manually as\n necessary.\n\n6. percpu.h was updated not to include slab.h.\n\n7. Build test were done on the following configurations and failures\n were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my\n distributed build env didn\u0027t work with gcov compiles) and a few\n more options had to be turned off depending on archs to make things\n build (like ipr on powerpc/64 which failed due to missing writeq).\n\n * x86 and x86_64 UP and SMP allmodconfig and a custom test config.\n * powerpc and powerpc64 SMP allmodconfig\n * sparc and sparc64 SMP allmodconfig\n * ia64 SMP allmodconfig\n * s390 SMP allmodconfig\n * alpha SMP allmodconfig\n * um on x86_64 SMP allmodconfig\n\n8. percpu.h modifications were reverted so that it could be applied as\n a separate patch and serve as bisection point.\n\nGiven the fact that I had only a couple of failures from tests on step\n6, I\u0027m fairly confident about the coverage of this conversion patch.\nIf there is a breakage, it\u0027s likely to be something in one of the arch\nheaders which should be easily discoverable easily on most builds of\nthe specific arch.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nGuess-its-ok-by: Christoph Lameter \u003ccl@linux-foundation.org\u003e\nCc: Ingo Molnar \u003cmingo@redhat.com\u003e\nCc: Lee Schermerhorn \u003cLee.Schermerhorn@hp.com\u003e\n" } ], "next": "a97c13c34509be460dea23c86f31c02daa2428b5" }