)]}' { "log": [ { "commit": "c10841ca722a0bc960dc541c51582773f9a24f98", "tree": "f1e5901db0a530cfd4008f718a908a86bddcb333", "parents": [ "37000b305bff81bb1ee2f7f37b1319b670a08f76" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Thu Jun 30 08:32:41 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 05 14:42:36 2011 -0400" }, "message": "cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex\n\nThere was a deadlock when rfkill-blocking a wireless interface,\nbecause we were locking the rdev mutex on NETDEV_GOING_DOWN to stop\nsched_scans that were eventually running. The rfkill block code was\nalready holding a mutex under rdev:\n\nkernel: \u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\nkernel: [ INFO: possible circular locking dependency detected ]\nkernel: 3.0.0-rc1-00049-g1fa7b6a #57\nkernel: -------------------------------------------------------\nkernel: kworker/0:1/4525 is trying to acquire lock:\nkernel: (\u0026rdev-\u003emtx){+.+.+.}, at: [\u003cffffffff8164c831\u003e] cfg80211_netdev_notifier_call+0x131/0x5b0\nkernel:\nkernel: but task is already holding lock:\nkernel: (\u0026rdev-\u003edevlist_mtx){+.+.+.}, at: [\u003cffffffff8164dcef\u003e] cfg80211_rfkill_set_block+0x4f/0xa0\nkernel:\nkernel: which lock already depends on the new lock.\n\nTo fix this, add a new mutex specifically for sched_scan, to protect\nthe sched_scan_req element in the rdev struct, instead of using the\nglobal rdev mutex.\n\nReported-by: Duane Griffin \u003cduaneg@dghda.com\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a66b98db570a638afd909459e1e6bfa272344bd3", "tree": "e4e78a0602b46121548fad2e357f03d550d23c94", "parents": [ "8fcbd4dc7a1b338b393dcd6869deb1725cf1a9f3" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Thu Jun 23 00:00:24 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jun 27 14:45:25 2011 -0400" }, "message": "mac80211: fix rx-\u003ekey NULL dereference during mic failure\n\nSometimes when reporting a MIC failure rx-\u003ekey may be unset. This\ncode path is hit when receiving a packet meant for a multicast\naddress, and decryption is performed in HW.\n\nFortunately, the failing key_idx is not used for anything up to\n(and including) usermode, so we allow ourselves to drop it on the\nway up when a key cannot be retrieved.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "57a27e1d6a3bb9ad4efeebd3a8c71156d6207536", "tree": "2873dc389e21115f1b674134baf1fae0ecdbb087", "parents": [ "6633d649788e72400b02098bd389585e2c56a557" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Tue Jun 07 20:42:26 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jun 07 14:19:07 2011 -0400" }, "message": "nl80211: fix overflow in ssid_len\n\nWhen one of the SSID\u0027s length passed in a scan or sched_scan request\nis larger than 255, there will be an overflow in the u8 that is used\nto store the length before checking. This causes the check to fail\nand we overrun the buffer when copying the SSID.\n\nFix this by checking the nl80211 attribute length before copying it to\nthe struct.\n\nThis is a follow up for the previous commit\n208c72f4fe44fe09577e7975ba0e7fa0278f3d03, which didn\u0027t fix the problem\nentirely.\n\nReported-by: Ido Yariv \u003cido@wizery.com\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "333ba7325213f0a09dfa5ceeddb056d6ad74b3b5", "tree": "9dff6d71d30b863a30bc07c22326e32cd573eea5", "parents": [ "1144181c1bc054dc5e001a6f10b4820167e6c883" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Sun May 29 15:53:20 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 01 14:34:01 2011 -0400" }, "message": "cfg80211: don\u0027t drop p2p probe responses\n\nCommit 0a35d36 (\"cfg80211: Use capability info to detect mesh beacons\")\nassumed that probe response with both ESS and IBSS bits cleared\nmeans that the frame was sent by a mesh sta.\n\nHowever, these capabilities are also being used in the p2p_find phase,\nand the mesh-validation broke it.\n\nRename the WLAN_CAPABILITY_IS_MBSS macro, and verify that mesh ies\nexist before assuming this frame was sent by a mesh sta.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "11ad2f52826ac6d58d6780d3d8a3e098c88d9142", "tree": "92206a4063520aa749f0086f5addb9889f6d6b6f", "parents": [ "c5c177b4aca83338781e72be2e6dd1601c560cb3", "1df85ecec36ad5da3f0165760704310d6c03f65f" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 27 15:18:35 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 27 15:18:35 2011 -0400" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n" }, { "commit": "208c72f4fe44fe09577e7975ba0e7fa0278f3d03", "tree": "f556afcda6931d1ad7d5ab41341a887c0b25f664", "parents": [ "21bc7af6e5e684b44725b20f679e701e38ceef15" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Thu May 19 00:43:38 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 26 15:43:28 2011 -0400" }, "message": "nl80211: fix check for valid SSID size in scan operations\n\nIn both trigger_scan and sched_scan operations, we were checking for\nthe SSID length before assigning the value correctly. Since the\nmemory was just kzalloc\u0027ed, the check was always failing and SSID with\nover 32 characters were allowed to go through.\n\nThis was causing a buffer overflow when copying the actual SSID to the\nproper place.\n\nThis bug has been there since 2.6.29-rc4.\n\nCc: stable@kernel.org\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "31ec97d9cebac804814de298592648f7c18d8281", "tree": "f725fcce0d5a9d6d7bd64b777de0a44e71773d0e", "parents": [ "557eed603159b4e007c57d97fad1333ecebd3c2e", "daf8cf608d57a0b9f22276036e420cc82cf6ab4f" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue May 24 16:47:54 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue May 24 16:47:54 2011 -0400" }, "message": "Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n" }, { "commit": "a2cd43c52aa5c676b03d575177536e05ac672c75", "tree": "e62d1019851368daebb5cf99e1a6c25c2967f2df", "parents": [ "d676ff493d9dfb8b34892214665028a8c85e2056" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed May 18 11:42:03 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 19 13:54:17 2011 -0400" }, "message": "nl80211: remove some stack variables in trigger_scan and start_sched_scan\n\nSome stack variables (name *ssid and *channel) are only used to define\nthe size of the memory block that needs to be allocated for the\nrequest structure in the nl80211_trigger_scan() and\nnl80211_start_sched_scan() functions.\n\nThis is unnecessary because the sizes of the actual elements in the\nstructure can be used instead.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ed9d01026f156db2d638cbb045231c7a8fde877d", "tree": "0c99c25b87973112db1b8464e5ad429cd943786f", "parents": [ "79d2b1570bcc31b846ccb2114a34e98ca87bf1d9" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Mon May 16 19:40:15 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 19 10:37:18 2011 -0400" }, "message": "cfg80211: Use consistent BSS matching between scan and sme\n\ncfg80211 scan code adds separate BSS entries if the same BSS shows up\non multiple channels. However, sme implementation does not use the\nfrequency when fetching the BSS entry. Fix this by adding channel\ninformation to cfg80211_roamed() and include it in cfg80211_get_bss()\ncalls.\n\nPlease note that drivers using cfg80211_roamed() need to be modified to\nfully implement this fix. This commit includes only minimal changes to\navoid compilation issues; it maintains the old (broken) behavior for\nmost drivers. ath6kl was the only one that I could test, so I updated\nit to provide the operating frequency in the roamed event.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e00cf3b9eb7839b952e434a75bff6b99e47337ac", "tree": "ef583ab8ac09bf703026650d4bc7777e6a3864d3", "parents": [ "1a8218e96271790a07dd7065a2ef173e0f67e328", "3b8ab88acaceb505aa06ef3bbf3a73b92470ae78" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 14:55:42 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 19:32:19 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-agn-tx.c\n\tnet/mac80211/sta_info.h\n" }, { "commit": "8b3becadc82de3b87a5c196239db3fef6caa9c82", "tree": "d71a3c7e29d30c92c4b677257c289ca63b4e65f3", "parents": [ "57cf8043a64b56a10b9f194572548a3dfb62e596" ], "author": { "name": "Yogesh Ashok Powar", "email": "yogeshp@marvell.com", "time": "Fri May 13 11:22:31 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 14:10:50 2011 -0400" }, "message": "cfg80211: make stripping of 802.11 header optional from AMSDU\n\nCurrently the devices that have already stripped IEEE 802.11\nheader from the AMSDU SKB can not use ieee80211_amsdu_to_8023s\nroutine. This patch enhances ieee80211_amsdu_to_8023s() API by\nchanging mandatory removing of IEEE 802.11 header from AMSDU\nto optional.\n\nSigned-off-by: Yogesh Ashok Powar \u003cyogeshp@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "57cf8043a64b56a10b9f194572548a3dfb62e596", "tree": "a0b9530e824c7e7b1417e20f87e800819abfe285", "parents": [ "108697c44b8e50bea3505c6bf9667da4627cb2d5" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Fri May 13 10:45:43 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 14:10:49 2011 -0400" }, "message": "nl80211: Move peer link state definition to nl80211\n\nThese definitions need to be exposed now that we can set the peer link\nstates via NL80211_ATTR_STA_PLINK_STATE. They were already being\n(opaquely) reported by NL80211_STA_INFO_PLINK_STATE.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7527a782e187d1214a5b3dc2897ce441033bb4ef", "tree": "3310adf988e72cb91736c0638d4c17edcccebfe1", "parents": [ "805d7d23ef9806e47b550ad80270c4cea4ffc984" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri May 13 10:58:57 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 14:10:40 2011 -0400" }, "message": "cfg80211: advertise possible interface combinations\n\nAdd the ability to advertise interface combinations in nl80211.\nThis allows the driver to indicate what the combinations are\nthat it supports. \"Combinations\" of just a single interface are\nimplicit, as previously. Note that cfg80211 will enforce that\nthe restrictions are met, but not for all drivers yet (once all\ndrivers are updated, we can remove the flag and enforce for all).\n\nWhen no combinations are actually supported, an empty list will\nbe exported so that userspace can know if the kernel exported\nthis info or not (although it isn\u0027t clear to me what tools using\nthe info should do if the kernel didn\u0027t export it).\n\nSince some interface types are purely virtual/software and don\u0027t\nfit the restrictions, those are exposed in a new list of pure SW\ntypes, not subject to restrictions. This mainly exists to handle\nAP-VLAN and monitor interfaces in mac80211.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "85a9994a0a6cba1a6cc6af4bd3ebd85f778be0fe", "tree": "e9dd8fff75d9c0ee2f5aec129bb6132499c72461", "parents": [ "a3836e02ba4c50db958d32d710b226f2408623dc" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Thu May 12 16:28:29 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 12 14:10:55 2011 -0400" }, "message": "cfg80211/mac80211: avoid bounce back mac-\u003ecfg-\u003emac on sched_scan_stopped\n\nWhen sched_scan_stopped was called by the driver, mac80211 calls\ncfg80211, which in turn was calling mac80211 back with a flag\n\"driver_initiated\". This flag was used so that mac80211 would do the\nnecessary cleanup but would not call the driver. This was enough to\nprevent the bounce back between the driver and mac80211, but not\nbetween mac80211 and cfg80211.\n\nTo fix this, we now do the cleanup in mac80211 before calling\ncfg80211. To help with locking issues, the workqueue was moved from\ncfg80211 to mac80211.\n\nReported-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "56d1893d94bc06d0b1aa3a53f924ed02f9e207bf", "tree": "90862ae6788cf267631bd9ddebf4bc450d0d2b26", "parents": [ "15cb309614f35df344b9f06a9ea9f077d1e449db" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon May 09 18:41:15 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 12 14:10:47 2011 -0400" }, "message": "cfg80211: restrict AP beacon intervals\n\nMultiple virtual AP interfaces can currently try\nto use different beacon intervals, but that just\nleads to problems since it won\u0027t actually be done\nthat way by drivers. Return an error in this case\nto make sure it won\u0027t be done wrong.\n\nAlso, ignore attempts to change the DTIM period\nor beacon interval during the lifetime of the BSS.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bbe6ad6dcb1eb26bd12ec85320f402721c3383ae", "tree": "08e7e3491caa30e22c9c38d9d3a8728a02adc0c5", "parents": [ "79f460ca49d8d5700756ab7071c951311c7f29cc" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed May 11 17:09:37 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 15:12:27 2011 -0400" }, "message": "cfg80211/nl80211: add interval attribute for scheduled scans\n\nIntroduce NL80211_ATTR_SCHED_SCAN_INTERVAL as a required attribute for\nNL80211_CMD_START_SCHED_SCAN. This value informs the driver at which\nintervals the scheduled scan cycles should be executed.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "807f8a8c300435d5483e8d78df9dcdbc27333166", "tree": "1537d40e149d7a8712fe63d17ea3b51093bf03a1", "parents": [ "6bdbdbf4a151a3a1333818cd17a7d7795e936041" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed May 11 17:09:35 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 15:12:26 2011 -0400" }, "message": "cfg80211/nl80211: add support for scheduled scans\n\nImplement new functionality for scheduled scan offload. With this feature we\ncan scan automatically at certain intervals.\n\nThe idea is that the hardware can perform scan automatically and filter on\ndesired results without waking up the host unnecessarily.\n\nAdd NL80211_CMD_START_SCHED_SCAN and NL80211_CMD_STOP_SCHED_SCAN\ncommands to the nl80211 interface. When results are available they are\nreported by NL80211_CMD_SCHED_SCAN_RESULTS events. The userspace is\ninformed when the scheduled scan has stopped with a\nNL80211_CMD_SCHED_SCAN_STOPPED event, which can be triggered either by\nthe driver or by a call to NL80211_CMD_STOP_SCHED_SCAN.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1833d81a1229adeab98f275b47624d66462561e5", "tree": "7dd9b45aba5f8d9ad47eaaed78ca2592e607ae0d", "parents": [ "28104cae63708d1790cd71db8a45af50d5ea5a92" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue May 03 16:57:18 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:50:36 2011 -0400" }, "message": "mac80211: allow setting supported rates on mesh peers\n\nThis is necessary for userspace managed stations.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8429828ec96b66b6861e9fabebec007e9e132370", "tree": "235ecff2d762d55a4a4404a45e73ad2d25a656eb", "parents": [ "ff973af74aa6932ca4758266bccec68e8135ddf7" ], "author": { "name": "Thomas Pedersen", "email": "thomas@cozybit.com", "time": "Tue May 03 16:57:13 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:44:47 2011 -0400" }, "message": "nl80211: allow setting MFP flag for a meshif\n\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ff973af74aa6932ca4758266bccec68e8135ddf7", "tree": "4d18994cffe190d50acaae4ecce1c3684186f063", "parents": [ "9c3990aaec0ad9f686ef6480f6861f2df89b2a7a" ], "author": { "name": "Thomas Pedersen", "email": "thomas@cozybit.com", "time": "Tue May 03 16:57:12 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:44:47 2011 -0400" }, "message": "nl80211: allow installing keys for a meshif\n\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9c3990aaec0ad9f686ef6480f6861f2df89b2a7a", "tree": "5e073ffce0ce0aed45e9dfeb9f41efc140c770f7", "parents": [ "0a35d36d6f019bde6c98812456798275b02e5aee" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue May 03 16:57:11 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:44:46 2011 -0400" }, "message": "nl80211: Let userspace drive the peer link management states.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0a35d36d6f019bde6c98812456798275b02e5aee", "tree": "b2605d9a45226072c430d35f39f82082d99df8a8", "parents": [ "915b5c50f8f45e78ea96d93f1e49edb20c9470bd" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Wed May 04 10:24:56 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:37:48 2011 -0400" }, "message": "cfg80211: Use capability info to detect mesh beacons.\n\nMesh beacons no longer use all-zeroes BSSID. Beacon frames for MBSS,\ninfrastructure BSS, or IBSS are differentiated by the Capability\nInformation field in the Beacon frame. A mesh STA sets the ESS and IBSS\nsubfields to 0 in transmitted Beacon or Probe Response management\nframes.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0778a6a3e56cabdc322755f97ad23ee67efad0f0", "tree": "222900fec85fa406ce906125cdcb91036af07ac9", "parents": [ "b130e5cec958bae3867cf6ab09a9b24ba8fada01" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue May 03 16:57:08 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:37:47 2011 -0400" }, "message": "mac80211: Let userspace send action frames over mesh interfaces\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b130e5cec958bae3867cf6ab09a9b24ba8fada01", "tree": "945eca0ace3d299dfd83de7b7e13c60aa36ba2e9", "parents": [ "f3a57fd148a4afd3c38f558c5b44972cb29ea8ba" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue May 03 16:57:07 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:37:47 2011 -0400" }, "message": "nl80211: Introduce NL80211_MESH_SETUP_USERSPACE_AMPE\n\nIntroduce a new configuration option to support AMPE from userspace.\n\nPrior to this series we only supported authentication in userspace: an\nauthentication daemon would authenticate peer candidates in userspace\nand hand them over to the kernel. From that point the mesh stack would\ntake over and establish a peer link (Mesh Peering Management).\n\nThese patches introduce support for Authenticated Mesh Peering Exchange\nin userspace. The userspace daemon implements the AMPE protocol and on\nsuccessfull completion create mesh peers and install encryption keys.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6572e91d5fa61bb3f879a00b96d763c566ced6cb", "tree": "90702b81df68da39c5475af3555c624871be209a", "parents": [ "d21844c7c23a71acea6fd68365b09b40e252a876" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Mon Apr 25 15:56:16 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue May 10 15:53:47 2011 -0400" }, "message": "wireless: Fix warnings due to -Wunused-but-set-variable\n\nThese warnings are exposed by gcc 4.6.\nnet/wireless/reg.c: In function \u0027freq_reg_info_regd\u0027:\nnet/wireless/reg.c:675:38: warning: variable \u0027pr\u0027 set but not used\n[-Wunused-but-set-variable]\nnet/wireless/lib80211_crypt_wep.c: In function \u0027lib80211_wep_build_iv\u0027:\nnet/wireless/lib80211_crypt_wep.c:99:12: warning: variable \u0027len\u0027 set but\nnot used [-Wunused-but-set-variable]\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ff1b6e69ad4f31fb3c9c6da2665655f2e798dd70", "tree": "6fc049fd0389ffb382ea401096d7bd665642af5c", "parents": [ "8f7f3b2fcc4ccbba0be776049df41a2f96c986ac" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed May 04 15:37:28 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 05 14:59:19 2011 -0400" }, "message": "nl80211/cfg80211: WoWLAN support\n\nThis is based on (but now quite far from) the\noriginal work from Luis and Eliad. Add support\nfor configuring WoWLAN triggers, and getting\nthe configuration out again. Changes from the\noriginal patchset are too numerous to list,\nbut one important change needs highlighting:\nthe suspend() callback is passed NULL for the\ntrigger configuration if userspace has not\nconfigured WoWLAN at all.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0e579d6a8f4aea346da818f13ee71401c125e639", "tree": "5a4efd3d824f6b246e43e8a8ced4b58494710423", "parents": [ "270e58e8898c8be40451ebee45b6c9b5bd5db04b" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Tue May 03 22:45:16 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 05 14:59:16 2011 -0400" }, "message": "nl80211: Fix set_key regression with some drivers\n\nCommit dbd2fd656f2060abfd3a16257f8b51ec60f6d2ed added a mechanism for\nuser space to indicate whether a default key is being configured for\nonly unicast or only multicast frames instead of all frames. This\ncommit added a driver capability flag for indicating whether separate\ndefault keys are supported and validation of the set_key command based\non that capability.\n\nHowever, this single capability flag is not enough to cover possible\ndifference based on mode (AP/IBSS/STA) and the way this change was\nintroduced resulted in a regression with drivers that do not indicate\nthe new capability (i.e.., more or less any non-mac80211 driver using\ncfg80211) when using a recent wpa_supplicant snapshot.\n\nFix the regression by removing the new check which is not strictly\nspeaking needed. The new separate default key functionality is needed\nonly for RSN IBSS which has a separate capability indication.\n\nCc: stable@kernel.org\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a70171dce9cd44cb06c7d299eba9fa87a8933045", "tree": "5425df5f33fadc617c7dec99578d06f0d933578e", "parents": [ "5a412ad7f4c95bb5b756aa12b52646e857e7c75d", "eaef6a93bd52a2cc47b9fce201310010707afdb4" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 05 13:32:35 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 05 13:32:35 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/libertas/if_cs.c\n\tdrivers/net/wireless/rtlwifi/pci.c\n\tnet/bluetooth/l2cap_sock.c\n" }, { "commit": "c989bb15e95a93e20fc86783264f6298116e8651", "tree": "668efc5ef9f3929cbdce6fa02a3720da672dbeb1", "parents": [ "d3bb1429a2c1470d1f84646c00e34dc6784ee06e" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Mon Apr 25 18:35:48 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 26 16:14:55 2011 -0400" }, "message": "cfg80211: fix regresion on reg user timeout\n\nThe patch \"cfg80211: add a timer for invalid user reg hints\"\nintroduced a regression for the case where a secondary identical\nregulatory hint from a user is sent. What would happen is the\nsecond hint would schedule delayed work in to catch a timeout\nbut since we are never processing it given that the hint was already\napplied we\u0027d always hit the timeout and and restore regulatory\nsettings back to world regulatory domain. This is fixed by simply\navoiding sheduling work if the hint was already applied.\n\nTested-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nReported-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "40db6c77ab48c3f3240422ff92fd6da222e2eb95", "tree": "f880a016b250d24bd8c2af822c9f345b6f41de32", "parents": [ "0a6c9b1b666671a22905d38bc41ec1a04b85832f" ], "author": { "name": "Amitkumar Karwar", "email": "akarwar@marvell.com", "time": "Thu Apr 21 14:10:27 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:50:17 2011 -0400" }, "message": "cfg80211: module_param to disable HT40 in 2.4GHz band\n\nCurrently mac80211 uses ieee80211_disable_40mhz_24ghz module\nparameter to allow disabling 40MHz operation in the 2.4GHz band.\nMove this handling from mac80211 to cfg80211 so that the feature\nwill be more generic.\n\nSigned-off-by: Amitkumar Karwar \u003cakarwar@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cfef6047c4027a8448ec8dafeaf2bb362cc882e4", "tree": "c254bd25aa8b4b0696b5b5cc45d8e30c7c1bb9dd", "parents": [ "b71d1d426d263b0b6cb5760322efebbfc89d4463", "73b48099cc265f88fa1255f3f43e52fe6a94fd5c" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:34:25 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:34:25 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-core.c\n\tdrivers/net/wireless/rt2x00/rt2x00queue.c\n\tdrivers/net/wireless/rt2x00/rt2x00queue.h\n" }, { "commit": "ebe27c91af8b7f4810ae906fbd3eeb2d87850026", "tree": "eff1fe0dbb8ecb4b116d8f96c6beb3eda1c52c7a", "parents": [ "f60c49b67dd6db2ccb740a6a671414f9dab00c4f" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mshajakhan@atheros.com", "time": "Fri Apr 08 21:24:24 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:58:47 2011 -0400" }, "message": "{mac|nl}80211: Add station connected time\n\nAdd station connected time in debugfs. This will be helpful to get a\nmeasure of stability of the connection and for debugging stress issues\n\nCc: Senthilkumar Balasubramanian \u003cSenthilkumar.Balasubramanian@Atheros.com\u003e\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmshajakhan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c93b5e717ec47b57abfe0229360bc11e77520984", "tree": "1e6f703c3c1b1c2e55b759b4e992ef04e81f973e", "parents": [ "96b78dff0321d881ef27d858a462c476e0444619" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:34 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:39 2011 -0400" }, "message": "nl80211: New notification to discover mesh peer candidates.\n\nNotify userspace when a beacon/presp is received from a suitable mesh\npeer candidate for whom no sta information exists. Userspace can then\ndecide to create a sta info for the candidate. If userspace is not\nready to authenticate the peer right away, it can create the sta info\nwith the authenticated flag unset and set it later.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "96b78dff0321d881ef27d858a462c476e0444619", "tree": "ef81668e545ec6373e0793c98add1533e2435f44", "parents": [ "53e805111b69d55834f4e1ed0a31a97ea0b9e425" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:33 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:39 2011 -0400" }, "message": "nl80211/mac80211: Perform PLINK_ACTION on new station\n\nModify the NEW_STATION command to accept PLINK_ACTIONS, in case\nuserspace wants to create stations and initiate a peer link right away\n(for authenticated stations) or create a blocked station (for\ndebugging).\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b39c48fac1fc915a5dcd024bf6e9aabc855ed591", "tree": "d8c5d6e987f388b8c8769d16a51a07dfcd9c3539", "parents": [ "5cff5e01e818029a5d2c3c31b7ae5e5e7ee70452" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:30 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:38 2011 -0400" }, "message": "nl80211/mac80211: let userspace authenticate stations\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5cff5e01e818029a5d2c3c31b7ae5e5e7ee70452", "tree": "6031ce45cf4a1dd62d9f1237a225a0a8ce005cf0", "parents": [ "15d5dda623139bbf6165030fc251bbd5798f4130" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:29 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:37 2011 -0400" }, "message": "mac80211: ignore peers if security is enabled for this mesh\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "15d5dda623139bbf6165030fc251bbd5798f4130", "tree": "3adb84ef7d65fd274008d950ad99434e1a3a28a7", "parents": [ "581a8b0feeed8877aab3a8ca4c972419790cd07f" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:28 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:37 2011 -0400" }, "message": "cfg80211/nl80211: Add userspace authentication flag to mesh setup\n\nDuring mesh setup, use NL80211_MESH_SETUP_USERSPACE_AUTH flag to create\na secure mesh and route management frames to userspace.\n\nAlso, NL80211_CMD_GET_WIPHY now returns a flag NL80211_SUPPORT_MESH_AUTH\nif the wiphy\u0027s mesh implementation supports routing of mesh auth frames\nto userspace. This is useful for forward compatibility between old\nkernels and new userspace tools.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "581a8b0feeed8877aab3a8ca4c972419790cd07f", "tree": "36ef0e86b367e0abeb0a50fbf59840f125efdbc7", "parents": [ "a22e93f5d819f11d2a2d6332e20ff5b462e5c208" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:27 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:37 2011 -0400" }, "message": "nl80211: rename NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE\n\nTo NL80211_MESH_SETUP_IE. This reflects our ability to insert any ie\ninto a mesh beacon, not simply path selection ies.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "252f4bf400df1712408fe83ba199a66a1b57ab1d", "tree": "e07fa00abdd55b31e22567786c78635f32c6a66c", "parents": [ "6ba1037c3d871ab70e342631516dbf841c35b086", "b37e3b6d64358604960b35e8ecbb7aed22e0926e" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:18:44 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:18:44 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/ath/ar9170/main.c\n\tdrivers/net/wireless/ath/ar9170/phy.c\n\tdrivers/net/wireless/zd1211rw/zd_rf_rf2959.c\n" }, { "commit": "b37e3b6d64358604960b35e8ecbb7aed22e0926e", "tree": "f9673afc2332c15a989d3b32f002363a92ea66e1", "parents": [ "a90c7a313a1c5b4fc99f987a2ae8f92ab0ae35c7", "bd39a274fb7b43374c797bafdb7f506598f36f77" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 16:45:40 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 16:45:40 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tdrivers/net/wireless/rtlwifi/efuse.c\n\tdrivers/net/wireless/rtlwifi/rtl8192c/fw_common.c\n\tnet/bluetooth/mgmt.c\n" }, { "commit": "a90c7a313a1c5b4fc99f987a2ae8f92ab0ae35c7", "tree": "b5484abed3ef3f23e17375fbc44657b875b7f418", "parents": [ "146095557b01cf5ff5d66554d96cbb8133d94eb9" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Tue Apr 05 10:49:04 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:52:29 2011 -0400" }, "message": "cfg80211: add a timer for invalid user reg hints\n\nWe have no other option but to inform userspace that we\nhave queued up their regulatory hint request when we are\ngiven one given that nl80211 operates atomically on user\nrequests. The best we can do is accept the request, and\nadd a delayed work item for processing failure and cancel it\nif we succeeed. Upon failure we restore the regulatory\nsettings and ignore the user input.\n\nThis fixes this reported bug:\n\nhttps://bugzilla.kernel.org/show_bug.cgi?id\u003d28112\n\nReported-by: gregoryx.alagnou@intel.com\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "146095557b01cf5ff5d66554d96cbb8133d94eb9", "tree": "38c92011c76c8a9510ea4cd1a02192113a9ddc7c", "parents": [ "02a7fa00a6d145037d549c779ad7692deb504acc" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Tue Apr 05 10:49:03 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:52:29 2011 -0400" }, "message": "cfg80211: fix regulatory restore upon user hints\n\nWhen we restore regulatory settings its possible CRDA\nwill not reply because of a bogus user entry. In this\ncase the bogus entry will prevent any further processing\non cfg80211 for regulatory domains even if we restore\nregulatory settings.\n\nTo prevent this we suck out all pending requests when\nrestoring regulatory settings and add them back into the\nqueue after we have queued up the reset work.\n\nThe impact of not having this applied is that a user\nwith privileges can issue a userspace regulatory hint\nwhile we are disasocciating and this would prevent any\nfurther processing of regulatory domains.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f4263c9857e6411ef2388868cc6c79a1602a654e", "tree": "2eec220076c4d56a2460e185076cda6646ef2f9f", "parents": [ "8447c163afeaa7e9f6f015088177b1c8511e0877" ], "author": { "name": "Paul Stewart", "email": "pstew@chromium.org", "time": "Thu Mar 31 09:25:41 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:12 2011 -0400" }, "message": "nl80211: Add BSS parameters to station\n\nThis allows user-space monitoring of BSS parameters for the associated\nstation. This is useful for debugging and verifying that the paramaters\nare as expected.\n\n[Exactly the same as before but bundled into a single message]\n\nSigned-off-by: Paul Stewart \u003cpstew@chromium.org\u003e\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "42933bac11e811f02200c944d8562a15f8ec4ff0", "tree": "fcdd9afe56eb0e746565ddd1f92f22d36678b843", "parents": [ "2b9accbee563f535046ff2cd382d0acaa92e130c", "25985edcedea6396277003854657b5f3cb31a628" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Apr 07 11:14:49 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Apr 07 11:14:49 2011 -0700" }, "message": "Merge branch \u0027for-linus2\u0027 of git://git.profusion.mobi/users/lucas/linux-2.6\n\n* \u0027for-linus2\u0027 of git://git.profusion.mobi/users/lucas/linux-2.6:\n Fix common misspellings\n" }, { "commit": "25985edcedea6396277003854657b5f3cb31a628", "tree": "f026e810210a2ee7290caeb737c23cb6472b7c38", "parents": [ "6aba74f2791287ec407e0f92487a725a25908067" ], "author": { "name": "Lucas De Marchi", "email": "lucas.demarchi@profusion.mobi", "time": "Wed Mar 30 22:57:33 2011 -0300" }, "committer": { "name": "Lucas De Marchi", "email": "lucas.demarchi@profusion.mobi", "time": "Thu Mar 31 11:26:23 2011 -0300" }, "message": "Fix common misspellings\n\nFixes generated by \u0027codespell\u0027 and manually reviewed.\n\nSigned-off-by: Lucas De Marchi \u003clucas.demarchi@profusion.mobi\u003e\n" }, { "commit": "ec15e68ba6a505631016f230899bafbb7b8cd0d6", "tree": "21190a10af3c22ccd34b03f11088b5976ef3e34b", "parents": [ "cfdc9a8bb8d90c6aa212a5a881862599673c443d" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed Mar 23 15:29:52 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:18 2011 -0400" }, "message": "cfg80211: Add nl80211 event for deletion of a station entry\n\nIndicate an NL80211_CMD_DEL_STATION event when a station entry in\nmac80211 is deleted to match with the NL80211_CMD_NEW_STATION event\nthat is used when the entry was added. This is needed, e.g., to allow\nuser space to remove a peer from RSN IBSS Authenticator state machine\nto avoid re-authentication and re-keying delays when the peer is not\nreachable anymore.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2b78ac9bfc7483ba4bda9ad3d10dd4afcf88337c", "tree": "da48e2e10050b2e535b908119bf60fe86b17b1e4", "parents": [ "bef9bacc4ec7ea6a02876164cd6ccaa4759edce4" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Mon Mar 28 14:32:32 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 28 15:42:02 2011 -0400" }, "message": "cfg80211: fix BSS double-unlinking (continued)\n\nThis patch adds to the fix \"fix BSS double-unlinking\"\n(commit 3207390a8b58bfc1335750f91cf6783c48ca19ca) by Johannes Berg.\n\nIt turns out, that the double-unlinking scenario can also occur if expired\nBSS elements are removed whilst an interface is performing association.\n\nTo work around that, replace list_del with list_del_init also in the\n\"cfg80211_bss_expire\" function, so that the check for whether the BSS still is\nin the list works correctly in cfg80211_unlink_bss.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bef9bacc4ec7ea6a02876164cd6ccaa4759edce4", "tree": "e68100ba3efa0ce2a13636027565f422e55bbd95", "parents": [ "67aa030c0dff6095128bcb4e8043b48360f32331" ], "author": { "name": "Mariusz Kozlowski", "email": "mk@lab.zgora.pl", "time": "Sat Mar 26 19:26:55 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 28 15:42:02 2011 -0400" }, "message": "cfg80211:: fix possible NULL pointer dereference\n\nIn cfg80211_inform_bss_frame() wiphy is first dereferenced on privsz\ninitialisation and then it is checked for NULL. This patch fixes that.\n\nSigned-off-by: Mariusz Kozlowski \u003cmk@lab.zgora.pl\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "106af2c99a5249b809aaed45b8353ac087821f4a", "tree": "b9d13cc35cfdc3b763408287b4e50daf32fda53b", "parents": [ "0c0217b016ba8a970a6f6ab62ad0d858f39881ca", "7d2c16befae67b901e6750b845661c1fdffd19f1" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 15 14:16:48 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 15 14:16:48 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n" }, { "commit": "3677713b799155c96637cdef3fa025e42f3fcf48", "tree": "e48fdda151203f20acd1a895ff3053e8c192f3c1", "parents": [ "266af4c745952e9bebf687dd68af58df553cb59d" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 07 16:17:59 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 11 14:16:58 2011 -0500" }, "message": "wireless: add support for ethtool_ops-\u003e{get,set}_ringparam\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "409ec36c320d580a036045e603f96286c362c609", "tree": "3dd9b3569799f7962b523a068052445e2d2c51aa", "parents": [ "1b7fe59322bef9e7a2c05b64a07a66b875299736", "8d5eab5aa676378b4c9daa62d10d08a0bca04677" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 11 14:11:11 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 11 14:11:11 2011 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n" }, { "commit": "4d9d88d121fdd01dd859717909ea3c90173f143a", "tree": "46f08bf9ab7c84a0978d3bc5a6202b0af15a308a", "parents": [ "80751e2b8ffcbbe065e850d943301aa1ab219599" ], "author": { "name": "Scott James Remnant", "email": "keybuk@google.com", "time": "Tue Mar 08 10:45:30 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 09 16:10:57 2011 -0500" }, "message": "net/wireless: add COUNTRY to to regulatory device uevent\n\nRegulatory devices issue change uevents to inform userspace of a need\nto call the crda tool; however these can often be sent before udevd is\nrunning, and were not previously included in the results of\nudevadm trigger (which requests a new change event using the /uevent\nattribute of the sysfs object).\n\nAdd a uevent function to the device type which includes the COUNTRY\ninformation from the last request if it has yet to be processed, the\ncase of multiple requests is already handled in the code by checking\nwhether an unprocessed one is queued in the same manner and refusing\nto queue a new one.\n\nThe existing udev rule continues to work as before.\n\nSigned-off-by: Scott James Remnant \u003ckeybuk@google.com\u003e\nAcked-By: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d72751ede1b9bf993d7bd3377305c8e9e36a3cc4", "tree": "27abaa49de7ff666dbf6bbcb0d7bae2b9f029a2d", "parents": [ "0a0e9ae1bd788bc19adc4d4ae08c98b233697402", "85a7045a90052749885e166f40af5e9140032287" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Mar 04 12:48:25 2011 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Mar 04 12:48:25 2011 -0800" }, "message": "Merge branch \u0027for-davem\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "85a7045a90052749885e166f40af5e9140032287", "tree": "cb4702d50bbe1d10ab9320ad3f63323b817727f7", "parents": [ "29546a6404e3a4b5d13f0a9586eb5cf1c3b25167", "e46395a4b3d32d161d8b6d8e4a002972b1faae3e" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 04 14:10:40 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 04 14:10:40 2011 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n" }, { "commit": "0a0e9ae1bd788bc19adc4d4ae08c98b233697402", "tree": "13825eeb5bbeae27d66e95f12168eff4b60701ab", "parents": [ "01a16b21d6adf992aa863186c3c4e561a57c1714", "b65a0e0c84cf489bfa00d6aa6c48abc5a237100f" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 03 21:27:42 2011 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 03 21:27:42 2011 -0800" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/bnx2x/bnx2x.h\n" }, { "commit": "c8dcfd8a046c1f49af0c15726761af17b957962d", "tree": "f021e2f1b9587c1f9b6c871c75881e81422ad280", "parents": [ "e7a2a4f5e61ccfae03185384e06b852dbb1e3630" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sun Feb 27 22:08:00 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 01 13:48:21 2011 -0500" }, "message": "cfg80211: add a field for the bitrate of the last rx data packet from a station\n\nAlso fix a typo in the STATION_INFO_TX_BITRATE description\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d3bd1b4c89cceca42211cd5bd30508b903267229", "tree": "ab3459496e3c9d8b1904b440b1a19c72ff23b3f0", "parents": [ "28801f351f76231e8d1e378274d6d56a577b897e", "0bf719dfdecc5552155cbec78e49fa06e531e35c" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 22 11:53:05 2011 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 22 11:53:05 2011 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "4f919a3bc54da01db829c520ce4b1fabfde1c3f7", "tree": "967b25b61b7e0afc261b6c79fe75f3f31644be1b", "parents": [ "a866a2cc1c558089dd4c627eeb300142b1354474" ], "author": { "name": "Daniel J Blueman", "email": "daniel.blueman@gmail.com", "time": "Tue Feb 22 00:11:06 2011 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 21 15:14:25 2011 -0500" }, "message": "fix cfg80211_wext_siwfreq lock ordering...\n\nI previously managed to reproduce a hang while scanning wireless\nchannels (reproducible with airodump-ng hopping channels); subsequent\nlockdep instrumentation revealed a lock ordering issue.\n\nWithout knowing the design intent, it looks like the locks should be\ntaken in reverse order; please comment.\n\n\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n[ INFO: possible circular locking dependency detected ]\n2.6.38-rc5-341cd #4\n-------------------------------------------------------\nairodump-ng/15445 is trying to acquire lock:\n (\u0026rdev-\u003edevlist_mtx){+.+.+.}, at: [\u003cffffffff816b1266\u003e]\ncfg80211_wext_siwfreq+0xc6/0x100\n\nbut task is already holding lock:\n (\u0026wdev-\u003emtx){+.+.+.}, at: [\u003cffffffff816b125c\u003e] cfg80211_wext_siwfreq+0xbc/0x100\n\nwhich lock already depends on the new lock.\n\nthe existing dependency chain (in reverse order) is:\n\n-\u003e #1 (\u0026wdev-\u003emtx){+.+.+.}:\n [\u003cffffffff810a79d6\u003e] lock_acquire+0xc6/0x280\n [\u003cffffffff816d6bce\u003e] mutex_lock_nested+0x6e/0x4b0\n [\u003cffffffff81696080\u003e] cfg80211_netdev_notifier_call+0x430/0x5f0\n [\u003cffffffff8109351b\u003e] notifier_call_chain+0x8b/0x100\n [\u003cffffffff810935b1\u003e] raw_notifier_call_chain+0x11/0x20\n [\u003cffffffff81576d92\u003e] call_netdevice_notifiers+0x32/0x60\n [\u003cffffffff815771a4\u003e] __dev_notify_flags+0x34/0x80\n [\u003cffffffff81577230\u003e] dev_change_flags+0x40/0x70\n [\u003cffffffff8158587c\u003e] do_setlink+0x1fc/0x8d0\n [\u003cffffffff81586042\u003e] rtnl_setlink+0xf2/0x140\n [\u003cffffffff81586923\u003e] rtnetlink_rcv_msg+0x163/0x270\n [\u003cffffffff8159d741\u003e] netlink_rcv_skb+0xa1/0xd0\n [\u003cffffffff815867b0\u003e] rtnetlink_rcv+0x20/0x30\n [\u003cffffffff8159d39a\u003e] netlink_unicast+0x2ba/0x300\n [\u003cffffffff8159dd57\u003e] netlink_sendmsg+0x267/0x3e0\n [\u003cffffffff8155e364\u003e] sock_sendmsg+0xe4/0x110\n [\u003cffffffff8155f3a3\u003e] sys_sendmsg+0x253/0x3b0\n [\u003cffffffff81003192\u003e] system_call_fastpath+0x16/0x1b\n\n-\u003e #0 (\u0026rdev-\u003edevlist_mtx){+.+.+.}:\n [\u003cffffffff810a7222\u003e] __lock_acquire+0x1622/0x1d10\n [\u003cffffffff810a79d6\u003e] lock_acquire+0xc6/0x280\n [\u003cffffffff816d6bce\u003e] mutex_lock_nested+0x6e/0x4b0\n [\u003cffffffff816b1266\u003e] cfg80211_wext_siwfreq+0xc6/0x100\n [\u003cffffffff816b2fad\u003e] ioctl_standard_call+0x5d/0xd0\n [\u003cffffffff816b3223\u003e] T.808+0x163/0x170\n [\u003cffffffff816b326a\u003e] wext_handle_ioctl+0x3a/0x90\n [\u003cffffffff815798d2\u003e] dev_ioctl+0x6f2/0x830\n [\u003cffffffff8155cf3d\u003e] sock_ioctl+0xfd/0x290\n [\u003cffffffff8117dffd\u003e] do_vfs_ioctl+0x9d/0x590\n [\u003cffffffff8117e53a\u003e] sys_ioctl+0x4a/0x80\n [\u003cffffffff81003192\u003e] system_call_fastpath+0x16/0x1b\n\nother info that might help us debug this:\n\n2 locks held by airodump-ng/15445:\n #0: (rtnl_mutex){+.+.+.}, at: [\u003cffffffff81586782\u003e] rtnl_lock+0x12/0x20\n #1: (\u0026wdev-\u003emtx){+.+.+.}, at: [\u003cffffffff816b125c\u003e]\ncfg80211_wext_siwfreq+0xbc/0x100\n\nstack backtrace:\nPid: 15445, comm: airodump-ng Not tainted 2.6.38-rc5-341cd #4\nCall Trace:\n [\u003cffffffff810a3f0a\u003e] ? print_circular_bug+0xfa/0x100\n [\u003cffffffff810a7222\u003e] ? __lock_acquire+0x1622/0x1d10\n [\u003cffffffff810a1f99\u003e] ? trace_hardirqs_off_caller+0x29/0xc0\n [\u003cffffffff810a79d6\u003e] ? lock_acquire+0xc6/0x280\n [\u003cffffffff816b1266\u003e] ? cfg80211_wext_siwfreq+0xc6/0x100\n [\u003cffffffff810a31d7\u003e] ? mark_held_locks+0x67/0x90\n [\u003cffffffff816d6bce\u003e] ? mutex_lock_nested+0x6e/0x4b0\n [\u003cffffffff816b1266\u003e] ? cfg80211_wext_siwfreq+0xc6/0x100\n [\u003cffffffff810a31d7\u003e] ? mark_held_locks+0x67/0x90\n [\u003cffffffff816b1266\u003e] ? cfg80211_wext_siwfreq+0xc6/0x100\n [\u003cffffffff816b1266\u003e] ? cfg80211_wext_siwfreq+0xc6/0x100\n [\u003cffffffff816b2fad\u003e] ? ioctl_standard_call+0x5d/0xd0\n [\u003cffffffff8157818b\u003e] ? __dev_get_by_name+0x9b/0xc0\n [\u003cffffffff816b2f50\u003e] ? ioctl_standard_call+0x0/0xd0\n [\u003cffffffff816b3223\u003e] ? T.808+0x163/0x170\n [\u003cffffffff8112ddf2\u003e] ? might_fault+0x72/0xd0\n [\u003cffffffff816b326a\u003e] ? wext_handle_ioctl+0x3a/0x90\n [\u003cffffffff8112de3b\u003e] ? might_fault+0xbb/0xd0\n [\u003cffffffff815798d2\u003e] ? dev_ioctl+0x6f2/0x830\n [\u003cffffffff810a1bae\u003e] ? put_lock_stats+0xe/0x40\n [\u003cffffffff810a1c8c\u003e] ? lock_release_holdtime+0xac/0x150\n [\u003cffffffff8155cf3d\u003e] ? sock_ioctl+0xfd/0x290\n [\u003cffffffff8117dffd\u003e] ? do_vfs_ioctl+0x9d/0x590\n [\u003cffffffff8116c8ff\u003e] ? fget_light+0x1df/0x3c0\n [\u003cffffffff8117e53a\u003e] ? sys_ioctl+0x4a/0x80\n [\u003cffffffff81003192\u003e] ? system_call_fastpath+0x16/0x1b\n\nSigned-off-by: Daniel J Blueman \u003cdaniel.blueman@gmail.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c0c84ef5c130f8871adbdaac2ba824b9195cb6d9", "tree": "d7221b5323d5a4d3d84676d32bdca21d21d85a18", "parents": [ "2360d2e8f01043632d6b651672bec66c49892f94", "3ad97fbcc233a295f2ccc2c6bdeb32323e360a5e" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 08 13:52:31 2011 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 08 13:52:31 2011 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "bf6a0579f60ae5225280c82cc52b51db1255e7fb", "tree": "7e0d508ed3ae1751ee465ebb80e0aec82a0d5a07", "parents": [ "73b30dfe4f756315b8cc431fca3ff340090c0ae4" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Mon Jan 31 15:52:58 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Feb 03 16:44:42 2011 -0500" }, "message": "cfg80211: Fix power save state after interface type change\n\nCurrently cfg80211 only configures the PSM state to the driver upon creation\nof a new virtual interface, but not after interface type change. The mac80211\non the other hand reinitializes its sdata structure every time the interface\ntype is changed, losing the PSM configuration.\n\nHence, if the interface type is changed to, say, ad-hoc and then back to\nmanaged, \"iw wlan0 get power_save\" will claim that PSM is enabled, when in\nfact on mac80211 level it is not.\n\nFix this in cfg80211 by configuring the PSM state to the driver each time\nthe interface is brought up instead of just when the interface is created.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fd95240568977ebd1ebb15b071464e0e392cde1a", "tree": "6458cf8f33a8b8ab6a8098208de29c83206ca3aa", "parents": [ "cdfb74d4c2e3bcc9383121af2591d0ae15007ba7", "fa9a741b841d0c2db04875310a06e8718c56fd4f" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Feb 03 13:06:43 2011 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Feb 03 13:06:43 2011 -0800" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "efe1cf0c5743caf4daccb57b399ef63edad41c9d", "tree": "d482979aa5a16a49d8095dcf00b6023c9051b86f", "parents": [ "76a9f6fd9adc5ce62b4ea36a099bb1458d4cb7a6" ], "author": { "name": "Julia Lawall", "email": "julia@diku.dk", "time": "Fri Jan 28 15:17:11 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 28 15:46:23 2011 -0500" }, "message": "net/wireless/nl80211.c: Avoid call to genlmsg_cancel\n\ngenlmsg_cancel subtracts some constants from its second argument before\ncalling nlmsg_cancel. nlmsg_cancel then calls nlmsg_trim on the same\narguments. nlmsg_trim tests for NULL before doing any computation, but a\nNULL second argument to genlmsg_cancel is no longer NULL due to the initial\nsubtraction. Nothing else happens in this execution, so the call to\ngenlmsg_cancel is simply unnecessary in this case.\n\nThe semantic match that finds this problem is as follows:\n(http://coccinelle.lip6.fr/)\n\n// \u003csmpl\u003e\n@@\nexpression data;\n@@\n\nif (data \u003d\u003d NULL) { ...\n* genlmsg_cancel(..., data);\n ...\n return ...;\n}\n// \u003c/smpl\u003e\n\nSigned-off-by: Julia Lawall \u003cjulia@diku.dk\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "45cbad6a1299842b5ae9a8a9c09630af063692f8", "tree": "153e05300a1a6cee014441e0d4733165a1f60f37", "parents": [ "53e3b6e29eeda568fbe6c1e32d35cb56eea94415" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Tue Jan 25 12:21:22 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 28 15:44:27 2011 -0500" }, "message": "cfg80211: Allow non-zero indexes for device specific pair-wise ciphers\n\nSome vendor specific cipher suites require non-zero key indexes for pairwise\nkeys, but as of currently, the cfg80211 does not allow it.\n\nAs validating they cipher parameters for vendor specific cipher suites is the\njob of the driver or hardware/firmware, change the cfg80211 to allow also\nnon-zero pairwise key indexes for vendor specific ciphers.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8571a19c4ac140f1a507f3e7eb716892afa27109", "tree": "55ef6a0ab68d6388177d3290a7fd6bc3f12a381f", "parents": [ "aae7c47311659e5150b740d61c4be418198239fa", "8d8d3fdc0d42be0ba75be227465773a54bb48a0b" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jan 27 16:00:37 2011 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jan 27 16:00:37 2011 -0800" }, "message": "Merge branch \u0027master\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "59eb21a6504731fc16db4cf9463065dd61093e08", "tree": "4a3732d451c85a5949c6d6294db51a56530677d8", "parents": [ "60f2d1d506195803fa6e1dcf3972637b740fdd60" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Mon Jan 17 13:37:28 2011 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 21 15:34:17 2011 -0500" }, "message": "cfg80211: Extend channel to frequency mapping for 802.11j\n\nExtend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to\nIEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping\nchannel numbers in the 2GHz and 5GHz band we can\u0027t map from channel to\nfrequency without knowing the band. This is no problem as in most contexts we\nknow the band. In places where we don\u0027t know the band (and WEXT compatibility)\nwe assume the 2GHz band for channels below 14.\n\nThis patch does not implement all channel to frequency mappings defined in\n802.11, it\u0027s just an extension for 802.11j 20MHz channels. 5MHz and 10MHz\nchannels as well as 802.11y channels have been omitted.\n\nThe following drivers have been updated to reflect the API changes:\niwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx.\nThe drivers have been compile-tested only.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: Brian Prodoehl \u003cbprodoehl@gmail.com\u003e\nAcked-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6a108a14fa356ef607be308b68337939e56ea94e", "tree": "1bf260572bd8f95ed867307a2bcf5d881c8ae4a6", "parents": [ "12fcdba1b7ae8b25696433f420b775aeb556d89b" ], "author": { "name": "David Rientjes", "email": "rientjes@google.com", "time": "Thu Jan 20 14:44:16 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 20 17:02:05 2011 -0800" }, "message": "kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT\n\nThe meaning of CONFIG_EMBEDDED has long since been obsoleted; the option\nis used to configure any non-standard kernel with a much larger scope than\nonly small devices.\n\nThis patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes\nreferences to the option throughout the kernel. A new CONFIG_EMBEDDED\noption is added that automatically selects CONFIG_EXPERT when enabled and\ncan be used in the future to isolate options that should only be\nconsidered for embedded systems (RISC architectures, SLOB, etc).\n\nCalling the option \"EXPERT\" more accurately represents its intention: only\nexpert users who understand the impact of the configuration changes they\nare making should enable it.\n\nReviewed-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nAcked-by: David Woodhouse \u003cdavid.woodhouse@intel.com\u003e\nSigned-off-by: David Rientjes \u003crientjes@google.com\u003e\nCc: Greg KH \u003cgregkh@suse.de\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Jens Axboe \u003caxboe@kernel.dk\u003e\nCc: Arnd Bergmann \u003carnd@arndb.de\u003e\nCc: Robin Holt \u003cholt@sgi.com\u003e\nCc: \u003clinux-arch@vger.kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ff039c6fb372c87a3cc4fd25bb846790cb35edb8", "tree": "8ebeac5e8ce433caa41ba770c504a852dcba6a3f", "parents": [ "f76b57b47e5fd423f9827c7b0ba7bbd06cca6b9b" ], "author": { "name": "Bob Copeland", "email": "me@bobcopeland.com", "time": "Wed Dec 29 17:09:02 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jan 04 14:43:01 2011 -0500" }, "message": "cfg80211: fix transposition of words in printk\n\nFixes the misplaced article in the following:\n\n\"cfg80211: Updating information on frequency 5785 MHz for\n 20 a MHz width channel with regulatory rule:\"\n\nSigned-off-by: Bob Copeland \u003cme@bobcopeland.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "39fd5de4472b7b222c6cec78d72b069133f694e4", "tree": "81dd5a546598a1b09d3a48ca0f001b375ad91acb", "parents": [ "7f531e03abf0162df3966c4fa5fa6fdd9302cb6b" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 16 11:30:28 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:49:47 2010 -0500" }, "message": "nl80211: Export available antennas\n\nExport the information which antennas are available for configuration as TX or\nRX antennas via nl80211.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7f531e03abf0162df3966c4fa5fa6fdd9302cb6b", "tree": "b5e91c5ee9580e942749768e96421c1e55c3491b", "parents": [ "c7108a7111cd9e592d6ad498be37276dbea75d2b" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 16 11:30:22 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:58 2010 -0500" }, "message": "cfg80211: Separate available antennas for RX and TX\n\nAs has been pointed out by Daniel Halperin some devices (e.g. Intel IWL5100)\ncan only TX from a subset of RX antennas, so use separate availability masks\nfor RX and TX.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c7108a7111cd9e592d6ad498be37276dbea75d2b", "tree": "dab25dbb5607c4151629bf747ee10b4487772419", "parents": [ "c80d545da3f7c0e534ccd4a780f322f80a92cff1" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:50 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:58 2010 -0500" }, "message": "mac80211: Send mesh non-HWMP path selection frames to userspace\n\nLet path selection frames for protocols other than HWMP be sent to\nuserspace via NL80211_CMD_REGISTER_FRAME. Also allow userspace to send\nand receive mesh path selection frames.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c80d545da3f7c0e534ccd4a780f322f80a92cff1", "tree": "edd5c51676b4677fc1a0b2fc692ffe97df863f25", "parents": [ "24bdd9f4c9af75b33b438d60381a67626de0128d" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:49 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:57 2010 -0500" }, "message": "mac80211: Let userspace enable and configure vendor specific path selection.\n\nUserspace will now be allowed to toggle between the default path\nselection algorithm (HWMP, implemented in the kernel), and a vendor\nspecific alternative. Also in the same patch, allow userspace to add\ninformation elements to mesh beacons. This is accordance with the\nExtensible Path Selection Framework specified in version 7.0 of the\n802.11s draft.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24bdd9f4c9af75b33b438d60381a67626de0128d", "tree": "f5ff8c4f9ec2a7cdb976f419532179f2c46b06e8", "parents": [ "8a09d6d80c90c02f2f8c89f69c702cab0c8d9b42" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:48 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:57 2010 -0500" }, "message": "mac80211: Rename mesh_params to mesh_config to prepare for mesh_setup\n\nMesh parameters can be to setup a mesh or to configure it.\nThis patch renames the ambiguous name mesh_params to mesh_config\nin preparation for mesh_setup.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2784fe915cd25adf23ea28534019308d8a144721", "tree": "c780a7ee530a7563559374c2a66c21e15cd1a487", "parents": [ "45ef6a0bcc9cd8f13004789ec6decb52e1d3045c" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Dec 15 19:24:11 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 16 15:22:31 2010 -0500" }, "message": "cfg80211: fix null pointer dereference with a custom regulatory request\n\nOnce we moved the core regulatory request to the queue and let\nthe scheduler process it last_request will have been left NULL\nuntil the schedular decides to process the first request. When\nthis happens and we are loading a driver with a custom regulatory\nrequest like all Atheros drivers we end up with a NULL pointer\ndereference. We fix this by checking if the request was a\ncustom one.\n\nBUG: unable to handle kernel NULL pointer dereference at 0000000000000004\nIP: [\u003cffffffffa016de87\u003e] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211]\nPGD 71f91067 PUD 712b2067 PMD 0\nOops: 0000 [#1] PREEMPT SMP\nlast sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1/loading\nCPU 0\nModules linked in: ath9k_htc(+) ath9k_common ath9k_hw ath \u003cetc\u003e\nPid: 3094, comm: insmod Tainted: G W 2.6.37-rc5-wl #16 INVALID/28427ZQ\nRIP: 0010:[\u003cffffffffa016de87\u003e] [\u003cffffffffa016de87\u003e] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211]\nRSP: 0018:ffff88007045db78 EFLAGS: 00010282\nRAX: 0000000000000000 RBX: ffffffffa047d9a0 RCX: ffff88007045dbd0\nRDX: 0000000000004e20 RSI: 000000000024cde0 RDI: ffff8800700483e0\nRBP: ffff88007045db98 R08: ffffffffa02f5b40 R09: 0000000000000001\nR10: 000000000000000e R11: 0000000000000001 R12: 0000000000000000\nR13: ffff88007004e3b0 R14: 0000000000000000 R15: ffff880070048340\nFS: 00007f635a707700(0000) GS:ffff880077400000(0000) knlGS:0000000000000000\nCS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b\nCR2: 0000000000000004 CR3: 00000000708a9000 CR4: 00000000000006f0\nDR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000\nDR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400\nProcess insmod (pid: 3094, threadinfo ffff88007045c000, task ffff8800713e3ec0)\nStack:\n ffffffffa047d9a0 0000000000000000 ffff88007004e3b0 0000000000000000\n ffff88007045dc08 ffffffffa016e147 000000007045dc08 0000000000000002\n ffff8800700483e0 ffffffffa02f5b40 ffff88007045dbd8 0000000000000000\nCall Trace:\n [\u003cffffffffa016e147\u003e] wiphy_apply_custom_regulatory+0x137/0x1d0 [cfg80211]\n [\u003cffffffffa047a690\u003e] ? ath9k_reg_notifier+0x0/0x50 [ath9k_htc]\n [\u003cffffffffa02f47f7\u003e] ath_regd_init+0x347/0x430 [ath]\n [\u003cffffffffa047b1f5\u003e] ath9k_htc_probe_device+0x6c5/0x960 [ath9k_htc]\n [\u003cffffffffa0472a2c\u003e] ath9k_htc_hw_init+0xc/0x30 [ath9k_htc]\n [\u003cffffffffa04747e6\u003e] ath9k_hif_usb_probe+0x216/0x3b0 [ath9k_htc]\n [\u003cffffffffa03bb6bc\u003e] usb_probe_interface+0x10c/0x210 [usbcore]\n [\u003cffffffff812aec26\u003e] driver_probe_device+0x96/0x1c0\n [\u003cffffffff812aedf3\u003e] __driver_attach+0xa3/0xb0\n [\u003cffffffff812aed50\u003e] ? __driver_attach+0x0/0xb0\n [\u003cffffffff812adaae\u003e] bus_for_each_dev+0x5e/0x90\n [\u003cffffffff812ae8c9\u003e] driver_attach+0x19/0x20\n [\u003cffffffff812ae438\u003e] bus_add_driver+0x168/0x320\n [\u003cffffffff812af071\u003e] driver_register+0x71/0x140\n [\u003cffffffff811fc4a8\u003e] ? __raw_spin_lock_init+0x38/0x70\n [\u003cffffffffa03ba39c\u003e] usb_register_driver+0xdc/0x190 [usbcore]\n [\u003cffffffffa03a2000\u003e] ? ath9k_htc_init+0x0/0x4f [ath9k_htc]\n [\u003cffffffffa047499e\u003e] ath9k_hif_usb_init+0x1e/0x20 [ath9k_htc]\n [\u003cffffffffa03a202b\u003e] ath9k_htc_init+0x2b/0x4f [ath9k_htc]\n [\u003cffffffff8100212f\u003e] do_one_initcall+0x3f/0x180\n [\u003cffffffff8109ef5b\u003e] sys_init_module+0xbb/0x200\n [\u003cffffffff8100bf52\u003e] system_call_fastpath+0x16/0x1b\nCode: \u003cetc, who cares\u003e\nRIP [\u003cffffffffa016de87\u003e] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211]\n RSP \u003cffff88007045db78\u003e\nCR2: 0000000000000004\n---[ end trace 79e4193601c8b713 ]---\n\nReported-by: Sujith Manoharan \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cf4e594ea7e55555e81647b74a3a8e8b2826a529", "tree": "794013429d9613ef253111fb50f993600ab14a55", "parents": [ "5928b91acae97622a6f2e679eb7a9f19bed68e3e" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Dec 16 00:52:40 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 16 15:22:30 2010 -0500" }, "message": "nl80211: Add notification for dropped Deauth/Disassoc\n\nAdd a new notification to indicate that a received, unprotected\nDeauthentication or Disassociation frame was dropped due to\nmanagement frame protection being in use. This notification is\nneeded to allow user space (e.g., wpa_supplicant) to implement\nSA Query procedure to recover from association state mismatch\nbetween an AP and STA.\n\nThis is needed to avoid getting stuck in non-working state when MFP\n(IEEE 802.11w) is used and a protected Deauthentication or\nDisassociation frame is dropped for any reason. After that, the\nstation would silently discard any unprotected Deauthentication or\nDisassociation frame that could be indicating that the AP does not\nhave association for the STA (when the Reason Code would be 6 or 7).\nIEEE Std 802.11w-2009, 11.13 describes this recovery mechanism.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a293911d4fd5e8593dbf478399a77f990d466269", "tree": "826f614f178e915c4d2c08aba9ca5b2a38f78c75", "parents": [ "14a085e77063090fb12ad391d0f4d46e593be225" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Dec 14 17:54:28 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 15 17:03:56 2010 -0500" }, "message": "nl80211: advertise maximum remain-on-channel duration\n\nWith the upcoming hardware offload implementation,\nsome devices will have a different maximum duration\nfor the remain-on-channel command. Advertise the\nmaximum duration in mac80211, and make mac80211 set\nit.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dbd2fd656f2060abfd3a16257f8b51ec60f6d2ed", "tree": "71e61430bd8593f2ad8f1c741b5a8a8be4a9d690", "parents": [ "897bed8b4320774e56f282cdc1cceb4d77442797" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Dec 09 19:58:59 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 13 15:23:28 2010 -0500" }, "message": "cfg80211/nl80211: separate unicast/multicast default TX keys\n\nAllow userspace to specify that a given key\nis default only for unicast and/or multicast\ntransmissions. Only WEP keys are for both,\nWPA/RSN keys set here are GTKs for multicast\nonly. For more future flexibility, allow to\nspecify all combiations.\n\nWireless extensions can only set both so use\nnl80211; WEP keys (connect keys) must be set\nas default for both (but 802.1X WEP is still\npossible).\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "01123e233193a544c85b622e1690f44532052c5b", "tree": "3632678a9441a2dce021f6a2ceada5de4e7e7e07", "parents": [ "998d516d9546eba04dd99ae49a78acb0cf770478" ], "author": { "name": "Sven Neumann", "email": "s.neumann@raumfeld.com", "time": "Thu Dec 09 15:05:24 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 13 15:23:28 2010 -0500" }, "message": "cfg80211: update information elements in cached BSS struct\n\nWhen a cached BSS struct is updated because a new beacon was received,\nthe code replaces the cached information elements by the IEs from the\nnew beacon. However it did not update the pub.information_elements\nand pub.len_information_elements fields leaving them either pointing\nto the old beacon IEs or in an inconsistent state where the data is\nreplaced by the new beacon IEs but len_information_elements still has\nits value from the first beacon.\n\nFix this by updating the information elements fields if they are\npointing to beacon IEs.\n\nSigned-off-by: Sven Neumann \u003cs.neumann@raumfeld.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a7ffac9591a2a0ee74c431396ae475a8d0caa51e", "tree": "174134b89e490592003307263e6b3964d9a1eacf", "parents": [ "a08e7ade9ddf4fe79576f953cc5c1725e944d26c" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Dec 08 13:59:24 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 13 15:23:27 2010 -0500" }, "message": "cfg80211: Add antenna availability information\n\nAdd a field to wiphy for the hardware to report the availble antennas for\nconfiguration. Only if this is set to something bigger than zero, will the\nanntenna configuration ops be executed.\n\nAllthough this could be a simple number of antennas, I defined it as a bitmap\nof antennas which are available for configuration, since it\u0027s more consistent\nwith the rest of the antenna API and there could be cases where the\nhardware allows only configuration of certain antennas. As it does not make\nmuch of a difference in size or normal usage, I think it\u0027s better to be able to\nsupport this, in case the need arises.\n\nThe antenna configuration is now also checked against the availabe antennas and\nrejected if it does not match.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\n\n--\nv3:\talways apply available antenna mask (for \"all\" antennas case).\n\nv2:\treject antenna configurations which don\u0027t match the available antennas\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "50b12f597be354a5a224f05c65c54c0667e57aec", "tree": "db4c59639d3d1bc013a2c3d7e17c47db2f94efc0", "parents": [ "7659a193f94c0003dd06e9e874d19bade1a8c952" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Fri Nov 19 12:40:25 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 08 15:38:43 2010 -0500" }, "message": "cfg80211: Add new BSS attribute ht_opmode\n\nAdd a new BSS attribute to allow hostapd to set the current HT opmode.\nOtherwise drivers won\u0027t be able to set up protection for HT rates in\nAP mode.\n\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "541a45a142df281c974d74eac2066138fc107b23", "tree": "b96f4808c3f17f2f560db9569ca2b08dba9eab67", "parents": [ "22de94de7de78b8de2fb1f2df5aa85b5556cfcfd" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 02 19:12:43 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 07 16:09:12 2010 -0500" }, "message": "nl80211/mac80211: Report signal average\n\nExtend nl80211 to report an exponential weighted moving average (EWMA) of the\nsignal value. Since the signal value usually fluctuates between different\npackets, an average can be more useful than the value of the last packet.\n\nThis uses the recently added generic EWMA library function.\n\n--\nv2:\tfix ABI breakage and change factor to be a power of 2.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "29cbe68c516a48a9a88b3226878570c6cbd83c02", "tree": "4774f8a3a244236234a521baa4d1ae5b3e1494ba", "parents": [ "bd90fdcc5fbd99a2a778999610420cf793bd1be2" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Dec 03 09:20:44 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:29 2010 -0500" }, "message": "cfg80211/mac80211: add mesh join/leave commands\n\nInstead of tying mesh activity to interface up,\nadd join and leave commands for mesh. Since we\nmust be backward compatible, let cfg80211 handle\njoining a mesh if a mesh ID was pre-configured\nwhen the device goes up.\n\nNote that this therefore must modify mac80211 as\nwell since mac80211 needs to lose the logic to\nstart the mesh on interface up.\n\nWe now allow querying mesh parameters before the\nmesh is connected, which simply returns defaults.\nSetting them (internally renamed to \"update\") is\nonly allowed while connected. Specify them with\nthe new mesh join command instead where needed.\n\nIn mac80211, beaconing must now also follow the\nmesh enabled/not enabled state, which is done\nby testing the mesh ID.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bd90fdcc5fbd99a2a778999610420cf793bd1be2", "tree": "18019688bd7edb6432f5f12ac258e6cf81ee9e61", "parents": [ "f9e10ce4cf86945eb5efcab31284c971877ed012" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Dec 03 09:20:43 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:29 2010 -0500" }, "message": "nl80211: refactor mesh parameter parsing\n\nI\u0027m going to need this in a new place later.\n\nTested-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f9e10ce4cf86945eb5efcab31284c971877ed012", "tree": "a56ec8ed84019901bf92aa969e366afb8b8ce36b", "parents": [ "09b174702601079c3a04806754be30ffbd70db4d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Dec 03 09:20:42 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:28 2010 -0500" }, "message": "cfg80211: require add_virtual_intf to return new dev\n\ncfg80211 used to do all its bookkeeping in\nthe notifier, but some new stuff will have\nto use local variables so make the callback\nreturn the netdev pointer.\n\nTested-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "45904f21655cf4f0ae7d0fab5906fe51bf56ecf4", "tree": "fd023d65b881b6cfcf1529eed7c1ad2523c166e1", "parents": [ "b9e61f11f47035e3b4545b51fb547fef48eb3096" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Fri Dec 03 09:20:40 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:28 2010 -0500" }, "message": "nl80211/mac80211: define and allow configuring mesh element TTL\n\nThe TTL in path selection information elements is different from\nthe mesh ttl used in mesh data frames. Version 7.03 of the 11s\ndraft calls this ttl \u0027Element TTL\u0027.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f7ca38dfe58c20cb1aa2ed9643187e8b194b5bae", "tree": "42db54588fd5fa769a16def75708117903577b40", "parents": [ "9a67d761b39614c0495dcab9a204e21a9f4c4d31" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Nov 25 10:02:29 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 29 15:24:35 2010 -0500" }, "message": "nl80211/cfg80211: extend mgmt-tx API for off-channel\n\nWith p2p, it is sometimes necessary to transmit\na frame (typically an action frame) on another\nchannel than the current channel. Enable this\nthrough the CMD_FRAME API, and allow it to wait\nfor a response. A new command allows that wait\nto be aborted.\n\nHowever, allow userspace to specify whether or\nnot it wants to allow off-channel TX, it may\nactually want to use the same channel only.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c063dbf52b998b852122dff07a8b8dd430b38437", "tree": "b27cc73fa8a1d9ed8fb5b0a1306e8194e18662a9", "parents": [ "79b1c460a0b55e55981c25c56597c4d5d2872de3" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Nov 24 08:10:05 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:36 2010 -0500" }, "message": "cfg80211: allow using CQM event to notify packet loss\n\nThis adds the ability for drivers to use CQM events\nto notify about packet loss for specific stations\n(which could be the AP for the managed mode case).\nSince the threshold might be determined by the\ndriver (it isn\u0027t passed in right now) it will be\npassed out of the driver to userspace in the event.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dd5b4cc71cd09c33e1579cc6d5720656e94e52de", "tree": "86a27c86480109d9b6bbedddc083095035fbef2d", "parents": [ "46090979a55a0dc2cdb3d939f94fa47742108194" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Mon Nov 22 20:58:24 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:35 2010 -0500" }, "message": "cfg80211/mac80211: improve ad-hoc multicast rate handling\n\n- store the multicast rate as an index instead of the rate value\n (reduces cpu overhead in a hotpath)\n- validate the rate values (must match a bitrate in at least one sband)\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e9c0268f02f8970149158a9b7ea1e5c1c45c819d", "tree": "1c73aeb5aa981379545a0b1edbd13dc6cbea6fee", "parents": [ "d7a066c92394f3e777351de0c903beeb8a08af76" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Tue Nov 16 19:56:49 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:33 2010 -0500" }, "message": "net/wireless: Use pr_\u003clevel\u003e and netdev_\u003clevel\u003e\n\nNo change in output for pr_\u003clevel\u003e prefixes.\nnetdev_\u003clevel\u003e output is different, arguably improved.\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d7a066c92394f3e777351de0c903beeb8a08af76", "tree": "f54ce8ac77d32b4c3166b4a2ca92525174a3213b", "parents": [ "ccb14354017272ddac002e859a2711610b6af174", "e476a5a41ad67d0e2b4a652820c49a3923eb936b" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:24 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:24 2010 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "ccb14354017272ddac002e859a2711610b6af174", "tree": "fa39f9b944508e596763c49b0088dc1cc2e263ca", "parents": [ "f8afa42b01c7a9f45b7cbaadb0481a0eeb96f18d" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:18:36 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:18:36 2010 -0500" }, "message": "Revert \"nl80211/mac80211: Report signal average\"\n\nThis reverts commit 86107fd170bc379869250eb7e1bd393a3a70e8ae.\n\nThis patch inadvertantly changed the userland ABI.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b2e253cf300c5e33f49b7dd8b593bfc722177401", "tree": "0da4d4121996f7869b0ce5ac469c6dd5e7c7beaa", "parents": [ "b0e2880b0518ad11af20c7c93ec5cac93f9f03b0" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Nov 17 21:46:09 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 22 15:48:51 2010 -0500" }, "message": "cfg80211: Fix regulatory bug with multiple cards and delays\n\nWhen two cards are connected with the same regulatory domain\nif CRDA had a delayed response then cfg80211\u0027s own set regulatory\ndomain would still be the world regulatory domain. There was a bug\non cfg80211\u0027s logic such that it assumed that once you pegged a\nrequest as the last request it was already the currently set\nregulatory domain. This would mean we would race setting a stale\nregulatory domain to secondary cards which had the same regulatory\ndomain since the alpha2 would match.\n\nWe fix this by processing each regulatory request atomically,\nand only move on to the next one once we get it fully processed.\nIn the case CRDA is not present we will simply world roam.\n\nThis issue is only present when you have a slow system and the\nCRDA processing is delayed. Because of this it is not a known\nregression.\n\nWithout this fix when a delay is present with CRDA the second card\nwould end up with an intersected regulatory domain and not allow it\nto use the channels it really is designed for. When two cards with\ntwo different regulatory domains were inserted you\u0027d end up\nrejecting the second card\u0027s regulatory domain request.\nThis fails with mac80211_hswim\u0027s regtest\u003d2 (two requests, same alpha2)\nand regtest\u003d3 (two requests, different alpha2) module parameter\noptions.\n\nThis was reproduced and tested against mac80211_hwsim using this\nCRDA delayer:\n\n #!/bin/bash\n echo $COUNTRY \u003e\u003e /tmp/log\n sleep 2\n /sbin/crda.orig\n\nAnd these regulatory tests:\n\n modprobe mac80211_hwsim regtest\u003d2\n modprobe mac80211_hwsim regtest\u003d3\n\nReported-by: Mark Mentovai \u003cmark@moxienet.com\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nTested-by: Mark Mentovai \u003cmark@moxienet.com\u003e\nTested-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b0e2880b0518ad11af20c7c93ec5cac93f9f03b0", "tree": "fe8b2f27d1515100a74e80d86f99ce608abfa296", "parents": [ "f333a7a2f49e2a9b46f8d18962bd750b18beeecd" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Nov 17 21:46:08 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 22 15:48:50 2010 -0500" }, "message": "cfg80211: move mutex locking to reg_process_pending_hints()\n\nThis will be required in the next patch and it makes the\nnext patch easier to review.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nTested-by: Mark Mentovai \u003cmark@moxienet.com\u003e\nTested-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f333a7a2f49e2a9b46f8d18962bd750b18beeecd", "tree": "211eef7a662424cdf8afdfa9db622031b876f553", "parents": [ "31e99729ae66d8b74316547c40eed15172f14ea8" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Nov 17 21:46:07 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 22 15:48:50 2010 -0500" }, "message": "cfg80211: move reg_work and reg_todo above\n\nThese will be used earlier in the next few patches.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nTested-by: Mark Mentovai \u003cmark@moxienet.com\u003e\nTested-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "31e99729ae66d8b74316547c40eed15172f14ea8", "tree": "67f88887c561e2e68bcfc72322a46340a92deb42", "parents": [ "8ce469999552b0c3325350cd9b4be417f2bbfc23" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Nov 17 21:46:06 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 22 15:48:50 2010 -0500" }, "message": "cfg80211: put core regulatory request into queue\n\nThis will simplify the synchronization for pending requests.\nWithout this we have a race between the core and when we\nrestore regulatory settings, although this is unlikely\nits best to just avoid that race altogether.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nTested-by: Mark Mentovai \u003cmark@moxienet.com\u003e\nTested-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "86107fd170bc379869250eb7e1bd393a3a70e8ae", "tree": "579ee24be87e94246450420f4de57d8eda942848", "parents": [ "eef39befaae2a1559efe197d795c376a317af2af" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Tue Nov 16 10:58:48 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 18 14:22:20 2010 -0500" }, "message": "nl80211/mac80211: Report signal average\n\nExtend nl80211 to report an exponential weighted moving average (EWMA) of the\nsignal value. Since the signal value usually fluctuates between different\npackets, an average can be more useful than the value of the last packet.\n\nThis uses the recently added generic EWMA library function.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "09a02fdb919876c01e8f05960750a418b3f7fa48", "tree": "56be1e83394ba38590ab16a0d2905fe49e05414d", "parents": [ "9236d838c920e90708570d9bbd7bb82d30a38130" ], "author": { "name": "Mark Mentovai", "email": "mark@moxienet.com", "time": "Wed Nov 17 16:34:37 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 18 11:35:05 2010 -0500" }, "message": "cfg80211: fix can_beacon_sec_chan, reenable HT40\n\nThis follows wireless-testing 9236d838c920e90708570d9bbd7bb82d30a38130\n(\"cfg80211: fix extension channel checks to initiate communication\") and\nfixes accidental case fall-through. Without this fix, HT40 is entirely\nblocked.\n\nSigned-off-by: Mark Mentovai \u003cmark@moxienet.com\u003e\nCc: stable@kernel.org\nAcked-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "885a46d0f7942d76c2f3860acb45f75237d3bb42", "tree": "f116fcc9b8204f7a113693e307de76e4098ebb36", "parents": [ "a619a4c0e1fd4e8c360c63d0df3fa0a401107d69" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Nov 11 15:07:22 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:39:08 2010 -0500" }, "message": "cfg80211: add support for setting the ad-hoc multicast rate\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "afe0cbf87500f0585d217deb8c6fd329793a7957", "tree": "a7e4f6db468e623961ab2b71ccf2bfb9c6756894", "parents": [ "0e67d6cb753643fc076a90fa9309301b3fbfb8db" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Nov 10 12:50:50 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:37:05 2010 -0500" }, "message": "cfg80211: Add nl80211 antenna configuration\n\nAllow setting of TX and RX antennas configuration via nl80211.\n\nThe antenna configuration is defined as a bitmap of allowed antennas to use.\nThis API can be used to mask out antennas which are not attached or should not\nbe used for other reasons like regulatory concerns or special setups.\n\nSeparate bitmaps are used for RX and TX to allow configuring different antennas\nfor receiving and transmitting. Each bitmap is 32 bit long, each bit\nrepresenting one antenna, starting with antenna 1 at the first bit. If an\nantenna bit is set, this means the driver is allowed to use this antenna for RX\nor TX respectively; if the bit is not set the hardware is not allowed to use\nthis antenna.\n\nUsing bitmaps has the benefit of allowing for a flexible configuration\ninterface which can support many different configurations and which can be used\nfor 802.11n as well as non-802.11n devices. Instead of relying on some hardware\nspecific assumptions, drivers can use this information to know which antennas\nare actually attached to the system and derive their capabilities based on\nthat.\n\n802.11n devices should enable or disable chains, based on which antennas are\npresent (If all antennas belonging to a particular chain are disabled, the\nentire chain should be disabled). HT capabilities (like STBC, TX Beamforming,\nAntenna selection) should be calculated based on the available chains after\napplying the antenna masks. Should a 802.11n device have diversity antennas\nattached to one of their chains, diversity can be enabled or disabled based on\nthe antenna information.\n\nNon-802.11n drivers can use the antenna masks to select RX and TX antennas and\nto enable or disable antenna diversity.\n\nWhile covering chainmasks for 802.11n and the standard \"legacy\" modes \"fixed\nantenna 1\", \"fixed antenna 2\" and \"diversity\" this API also allows more rare,\nbut useful configurations as follows:\n\n1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to\nhave a low gain antenna for TX in order to keep within the regulatory\nconstraints and a high gain antenna for RX in order to receive weaker signals\n(\"speak softly, but listen harder\"). This can be useful for building long-shot\noutdoor links. Another usage of this setup is having a low-noise pre-amplifier\non antenna 1 and a power amplifier on the other antenna. This way transmit\nnoise is mostly kept out of the low noise receive channel.\n(This would be bitmaps: tx 1 rx 2).\n\n2) Another similar setup is: Use RX diversity on both antennas, but always send\non antenna 1. Again that would allow us to benefit from a higher gain RX\nantenna, while staying within the legal limits.\n(This would be: tx 0 rx 3).\n\n3) And finally there can be special experimental setups in research and\ndevelopment even with pre 802.11n hardware where more than 2 antennas are\navailable. It\u0027s good to keep the API simple, yet flexible.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\n\n--\nv7:\tMade bitmasks 32 bit wide and rebased to latest wireless-testing.\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9236d838c920e90708570d9bbd7bb82d30a38130", "tree": "ee2d9ae6b4f82efe3b28e33abebec96b7e136141", "parents": [ "b5261cf4f3860bd772346a3e692683b6144dd44c" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Fri Nov 12 16:31:23 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 15:59:39 2010 -0500" }, "message": "cfg80211: fix extension channel checks to initiate communication\n\nWhen operating in a mode that initiates communication and using\nHT40 we should fail if we cannot use both primary and secondary\nchannels to initiate communication. Our current ht40 allowmap\nonly covers STA mode of operation, for beaconing modes we need\na check on the fly as the mode of operation is dynamic and\nthere other flags other than disable which we should read\nto check if we can initiate communication.\n\nDo not allow for initiating communication if our secondary HT40\nchannel has is either disabled, has a passive scan flag, a\nno-ibss flag or is a radar channel. Userspace now has similar\nchecks but this is also needed in-kernel.\n\nReported-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d91e41b690f795c04af4eb6fe28d2cafd3291051", "tree": "b37066063850a9e2003488d41ba49138d9109618", "parents": [ "e702d3cf29143327679ce2e2a60775eaf829f377" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Oct 20 10:18:59 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 15 13:24:15 2010 -0500" }, "message": "cfg80211: prefix REG_DBG_PRINT() with cfg80211\n\nEveryone\u0027s doing it, its the cool thing.\n\nCc: Easwar Krishnan \u003ceaswar.krishnan@atheros.com\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "e702d3cf29143327679ce2e2a60775eaf829f377" }