)]}' { "log": [ { "commit": "2bd06b23e2a099abbf550202f62cd433e01f83e7", "tree": "4398eefdff59ee14d9a5783222e08e8bf21f4423", "parents": [ "d00e42dd26bbda6a39aead6a47c59221e03a08f8" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "message": "ide-disk: use struct ide_taskfile in __ide_do_rw_disk()\n\nBased on the earlier work by Tejun Heo.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d00e42dd26bbda6a39aead6a47c59221e03a08f8", "tree": "5aac741e8318f52f6fde8a3b180a774bf355719c", "parents": [ "7a3b7512d0d7e78353e99f4538eb6d3354019d92" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "message": "ide-disk: fix taskfile registers loading order in __ide_do_rw_disk()\n\nLoad IDE_SECTOR_REG after IDE_FEATURE_REG and IDE_NSECTOR_REG when using CHS.\n\nThis patch is basically a preparation for the next one which converts\n__ide_do_rw_disk() to use struct ide_taskfile.\n\nIt shouldn\u0027t affect anything (just a usual paranoia to separate changes\nwhich change the way in which hardware is accessed from code cleanups).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7a3b7512d0d7e78353e99f4538eb6d3354019d92", "tree": "678b3fee02297f3dea5df8182198ecd701e69649", "parents": [ "650d841d9e053a618dd8ce753422f91b493cf2f6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "message": "ide-disk: merge LBA28 and LBA48 Host Protected Area support code (take 2)\n\n* Merge idedisk_{read_native,set}_max_address_ext() into\n idedisk_{read_native,set}_max_address().\n\nv2:\n* Remove LBA48 code leftover from idedisk_read_native_max_address()\n (\u0027high\u0027 variable initialization). (Noticed by Sergei).\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "650d841d9e053a618dd8ce753422f91b493cf2f6", "tree": "70f81acbf856e4a4d8126bdf6d60144b374cc1a9", "parents": [ "cd2a2d969761c26542095c01324201ca0b3ee896" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "message": "ide: add struct ide_taskfile (take 2)\n\n* Don\u0027t set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7]\n in idedisk_set_max_address_ext().\n\n* Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[]\n and hobRegister[].\n\n* Remove no longer needed IDE_CONTROL_OFFSET_HOB define.\n\n* Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t.\n\nWhile at it:\n\n* Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo.\n\nv2:\n* Add missing newlines. (Noticed by Sergei)\n\n* Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei)\n\n* Use unnamed unions for error/feature and status/command.\n (Suggested by Sergei).\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cd2a2d969761c26542095c01324201ca0b3ee896", "tree": "fa95d329ac2f2ae3fca30833b8b0ec91aefbd243", "parents": [ "1c029fd658baa2442e8e51dc9c819301cad95777" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "message": "ide: remove task_ioreg_t typedef (take 2)\n\nRemove task_ioreg_t typedef from the kernel code (but leave it\nin \u003clinux/hdreg.h\u003e for #ifndef/#endif __KERNEL__ case).\n\nWhile at it also move sata_ioreg_t typedef under #ifndef/#endif __KERNEL__.\n\nv2:\nRemove name of the second parameter from ide_execute_command() declaration.\n(Noticed by Sergei).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1c029fd658baa2442e8e51dc9c819301cad95777", "tree": "fbbfe6bb774001c9346ea0f772e5f4b0d469b989", "parents": [ "866664d79f6a920af07e6503f64366f4c5b2d41f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "message": "ide: remove -\u003edma_master field from ide_hwif_t (take 5)\n\n* Convert cmd64x, hpt366 and pdc202xx_old host drivers to use\n pci_resource_start(hwif-\u003epci_dev, 4) instead of hwif-\u003edma_master.\n\n* Remove no longer needed -\u003edma_master field from ide_hwif_t.\n\nv2:\n* Use the more readable \u0027hwif-\u003edma_base - (hwif-\u003echannel * 8)\u0027 instead of\n pci_resource_start(hwif-\u003epci_dev, 4).\n\nv3:\n* Use hwif-\u003eextra_base in hpt366/pdc20xx_old + some cosmetic fixups over v2\n (suggested by Sergei).\n\nv4:\n* Correct offsets in hpt3xxn_set_clock().\n\nv5:\n* Use hwif-\u003eextra_base in hpt366 for _real_ this time. (Noticed by Sergei)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "866664d79f6a920af07e6503f64366f4c5b2d41f", "tree": "74a6b06d79be8f3b0bb195657c37b386a21ac9cf", "parents": [ "a488f34e0dc7180f35fe48a60596fc82fe69d3ef" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "message": "hpt366: merge set_dma_mode() methods\n\nGroup the array of pointers to the timing tables with the timing register masks\nwhich allows us to merge HPT36x/HPT37x set_dma_mode() methods into one.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a488f34e0dc7180f35fe48a60596fc82fe69d3ef", "tree": "ad3f6781f451652d6211f2f96886ee49acf59109", "parents": [ "ceb1b2c583a9503e3ae68c4e7c652637971e3768" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "message": "hpt366: kill set_dma_mode() method wrapper\n\nThere\u0027s no reason to keep the set_dma_mode() method wrapper for two different\nchip families, so get rid of it...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ceb1b2c583a9503e3ae68c4e7c652637971e3768", "tree": "dd4893e9e8e643aa80ce991af2d99683af67e60b", "parents": [ "b5e1a4e2869af5ffaa102535ad63d184d86e66ec" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Fri Jan 25 22:17:04 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:04 2008 +0100" }, "message": "hpt366: change timing register masks\n\nSince PIO autotuning is now done always, there\u0027s no need anymore to program\nthe taskfile timings also on DMA modes, so change the IDE timing register\nmasks accordingly, \"inverting the polarity\" of the masks while at it...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b5e1a4e2869af5ffaa102535ad63d184d86e66ec", "tree": "4a4c5aa628126c0ef91e7427cc3f7b51c54efa75", "parents": [ "b47711bfbcd4eb77ca61ef0162487b20e023ae55" ], "author": { "name": "Aristeu Rozanski", "email": "arozansk@redhat.com", "time": "Fri Jan 25 22:17:04 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:04 2008 +0100" }, "message": "ide-io: set REQ_FAILED when drive is dead\n\nCurrently it\u0027s possible to ide-cd to set an incorrect blocksize by\nreading garbage if the drive is dead:\n\nide_cd_probe()\n -\u003e cdrom_read_toc()\n -\u003e cdrom_read_capacity()\n -\u003e cdrom_queue_packet_command()\n -\u003e ide_do_drive_cmd()\n -\u003e ide_do_request()\n -\u003e start_request()\n\non start_request():\n\n /* bail early if we\u0027ve exceeded max_failures */\n if (drive-\u003emax_failures \u0026\u0026 (drive-\u003efailures \u003e drive-\u003emax_failures)) {\n goto kill_rq;\n }\n(...)\nkill_rq:\n ide_kill_rq(drive, rq);\n return ide_stopped;\n\nide_kill_rq() and the next calls won\u0027t set REQ_FAILED on rq-\u003ecmd_flags and thus\ncdrom_queue_packet_command() won\u0027t return an error. then:\n\n stat \u003d cdrom_queue_packet_command(drive, \u0026req);\n if (stat \u003d\u003d 0) {\n *capacity \u003d 1 + be32_to_cpu(capbuf.lba);\n *sectors_per_frame \u003d\n be32_to_cpu(capbuf.blocklen) \u003e\u003e SECTOR_BITS;\n }\n\ncdrom_read_capacity() ends believing capbuf is valid but in fact it\u0027s just\nuninitialized data. back to cdrom_read_toc():\n\n /* Try to get the total cdrom capacity and sector size. */\n stat \u003d cdrom_read_capacity(drive, \u0026toc-\u003ecapacity, \u0026sectors_per_frame,\n sense);\n if (stat)\n toc-\u003ecapacity \u003d 0x1fffff;\n\n set_capacity(info-\u003edisk, toc-\u003ecapacity * sectors_per_frame);\n /* Save a private copy of te TOC capacity for error handling */\n drive-\u003eprobed_capacity \u003d toc-\u003ecapacity * sectors_per_frame;\n\n blk_queue_hardsect_size(drive-\u003equeue,\n sectors_per_frame \u003c\u003c SECTOR_BITS);\n\nthat will set drive-\u003equeue-\u003ehardsect_size to be the random value.\nhardsect_size is used to calculate inode-\u003ei_blkbits. later on, on a read\npath:\n\nvoid create_empty_buffers(struct page *page,\n unsigned long blocksize, unsigned long b_state)\n{ \n struct buffer_head *bh, *head, *tail;\n\n head \u003d alloc_page_buffers(page, blocksize, 1);\n bh \u003d head;\n do { \n bh-\u003eb_state |\u003d b_state;\n tail \u003d bh;\n bh \u003d bh-\u003eb_this_page;\n } while (bh);\n tail-\u003eb_this_page \u003d head;\n\nalloc_page_buffers() will return NULL if blocksize \u003e 4096. blocksize is\ncalculed based on inode-\u003ei_blkbits. that will trigger a null\ndereference on create_empty_buffers().\n\nSigned-off-by: Aristeu Rozanski \u003carozansk@redhat.com\u003e\nCc: Borislav Petkov \u003cbbpetkov@yahoo.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b47711bfbcd4eb77ca61ef0162487b20e023ae55", "tree": "b2a695dbd40f7ca2333664cf946ef34eda7b7dba", "parents": [ "7556afa0e0e436cad4f560ee83e5fbd5dac9359a", "2e08c0c1c3977a5ddc88887dd3af1b26c433e9d0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:44:29 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:44:29 2008 -0800" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:\n selinux: make mls_compute_sid always polyinstantiate\n security/selinux: constify function pointer tables and fields\n security: add a secctx_to_secid() hook\n security: call security_file_permission from rw_verify_area\n security: remove security_sb_post_mountroot hook\n Security: remove security.h include from mm.h\n Security: remove security_file_mmap hook sparse-warnings (NULL as 0).\n Security: add get, set, and cloning of superblock security information\n security/selinux: Add missing \"space\"\n" }, { "commit": "7556afa0e0e436cad4f560ee83e5fbd5dac9359a", "tree": "c1500918b4b7c8b760feab1c8eeb8a815d2135ca", "parents": [ "e07dd2ad305f6b29b47d713600aa8b722ef2a9f7", "d6c49a7a78fc841418bbd58bda504076f80ec51d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:40:02 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:40:02 2008 -0800" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:\n [AVR32] extint: Set initial irq type to low level\n [AVR32] extint: change set_irq_type() handling\n [AVR32] NMI debugging\n [AVR32] constify function pointer tables\n [AVR32] ATNGW100: Update defconfig\n [AVR32] ATSTK1002: Update defconfig\n [AVR32] Kconfig: Choose daughterboard instead of CPU\n [AVR32] Add support for ATSTK1003 and ATSTK1004\n [AVR32] Clean up external DAC setup code\n [AVR32] ATSTK1000: Move gpio-leds setup to setup.c\n [AVR32] Add support for AT32AP7001 and AT32AP7002\n [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg\n [AVR32] Oprofile support\n [AVR32] Include instrumentation menu\n Disable VGA text console for AVR32 architecture\n [AVR32] Enable debugging only when needed\n ptrace: Call arch_ptrace_attach() when request\u003dPTRACE_TRACEME\n [AVR32] Remove redundant try_to_freeze() call from do_signal()\n [AVR32] Drop GFP_COMP for DMA memory allocations\n" }, { "commit": "e07dd2ad305f6b29b47d713600aa8b722ef2a9f7", "tree": "4815808e538ec625bf2766b1eb9d91c7b3beaead", "parents": [ "eba0e319c12fb098d66316a8eafbaaa9174a07c3", "7bc5c414fe6627ec518c82d154c796f0981f5b02" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:39:18 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:39:18 2008 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (56 commits)\n [GFS2] Allow journal recovery on read-only mount\n [GFS2] Lockup on error\n [GFS2] Fix page_mkwrite truncation race path\n [GFS2] Fix typo\n [GFS2] Fix write alloc required shortcut calculation\n [GFS2] gfs2_alloc_required performance\n [GFS2] Remove unneeded i_spin\n [GFS2] Reduce inode size by moving i_alloc out of line\n [GFS2] Fix assert in log code\n [GFS2] Fix problems relating to execution of files on GFS2\n [GFS2] Initialize extent_list earlier\n [GFS2] Allow page migration for writeback and ordered pages\n [GFS2] Remove unused variable\n [GFS2] Fix log block mapper\n [GFS2] Minor correction\n [GFS2] Eliminate the no longer needed sd_statfs_mutex\n [GFS2] Incremental patch to fix compiler warning\n [GFS2] Function meta_read optimization\n [GFS2] Only fetch the dinode once in block_map\n [GFS2] Reorganize function gfs2_glmutex_lock\n ...\n" }, { "commit": "eba0e319c12fb098d66316a8eafbaaa9174a07c3", "tree": "b2703117db9e36bb3510654efd55361f61c54742", "parents": [ "df8dc74e8a383eaf2d9b44b80a71ec6f0e52b42e", "15e7b4452b72ae890f2fcb027b4c4fa63a1c9a7a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:38:25 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:38:25 2008 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits)\n [CRYPTO] twofish: Merge common glue code\n [CRYPTO] hifn_795x: Fixup container_of() usage\n [CRYPTO] cast6: inline bloat--\n [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long\n [CRYPTO] tcrypt: Make xcbc available as a standalone test\n [CRYPTO] xcbc: Remove bogus hash/cipher test\n [CRYPTO] xcbc: Fix algorithm leak when block size check fails\n [CRYPTO] tcrypt: Zero axbuf in the right function\n [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation\n [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h\n [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20\n [CRYPTO] tcrypt: Add select of AEAD\n [CRYPTO] salsa20: Add x86-64 assembly version\n [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version)\n [CRYPTO] gcm: Introduce rfc4106\n [CRYPTO] api: Show async type\n [CRYPTO] chainiv: Avoid lock spinning where possible\n [CRYPTO] seqiv: Add select AEAD in Kconfig\n [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy\n [CRYPTO] null: Allow setkey on digest_null \n ...\n" }, { "commit": "df8dc74e8a383eaf2d9b44b80a71ec6f0e52b42e", "tree": "bc3799a43e8b94fa84b32e37b1c124d5e4868f50", "parents": [ "556a169dab38b5100df6f4a45b655dddd3db94c1", "4a3ad20ccd8f4d2a0535cf98fa83f7b561ba59a9" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:34:42 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:35:13 2008 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6\n\nThis can be broken down into these major areas:\n - Documentation updates (language translations and fixes, as\n well as kobject and kset documenatation updates.)\n - major kset/kobject/ktype rework and fixes. This cleans up the\n kset and kobject and ktype relationship and architecture,\n making sense of things now, and good documenation and samples\n are provided for others to use. Also the attributes for\n kobjects are much easier to handle now. This cleaned up a LOT\n of code all through the kernel, making kobjects easier to use\n if you want to.\n - struct bus_type has been reworked to now handle the lifetime\n rules properly, as the kobject is properly dynamic.\n - struct driver has also been reworked, and now the lifetime\n issues are resolved.\n - the block subsystem has been converted to use struct device\n now, and not \"raw\" kobjects. This patch has been in the -mm\n tree for over a year now, and finally all the issues are\n worked out with it. Older distros now properly work with new\n kernels, and no userspace updates are needed at all.\n - nozomi driver is added. This has also been in -mm for a long\n time, and many people have asked for it to go in. It is now\n in good enough shape to do so.\n - lots of class_device conversions to use struct device instead.\n The tree is almost all cleaned up now, only SCSI and IB is the\n remaining code to fix up...\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (196 commits)\n Driver core: coding style fixes\n Kobject: fix coding style issues in kobject c files\n Kobject: fix coding style issues in kobject.h\n Driver core: fix coding style issues in device.h\n spi: use class iteration api\n scsi: use class iteration api\n rtc: use class iteration api\n power supply : use class iteration api\n ieee1394: use class iteration api\n Driver Core: add class iteration api\n Driver core: Cleanup get_device_parent() in device_add() and device_move()\n UIO: constify function pointer tables\n Driver Core: constify the name passed to platform_device_register_simple\n driver core: fix build with SYSFS\u003dn\n sysfs: make SYSFS_DEPRECATED depend on SYSFS\n Driver core: use LIST_HEAD instead of call to INIT_LIST_HEAD in __init\n kobject: add sample code for how to use ksets/ktypes/kobjects\n kobject: add sample code for how to use kobjects in a simple manner.\n kobject: update the kobject/kset documentation\n kobject: remove old, outdated documentation.\n ...\n" }, { "commit": "556a169dab38b5100df6f4a45b655dddd3db94c1", "tree": "c7788980db8dfb401dd4cf28f4445e1ab98f51d2", "parents": [ "eb36f4fc019835cecf0788907f6cab774508087b" ], "author": { "name": "Pekka Enberg", "email": "penberg@cs.helsinki.fi", "time": "Fri Jan 25 08:20:51 2008 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:30:36 2008 -0800" }, "message": "slab: fix bootstrap on memoryless node\n\nIf the node we\u0027re booting on doesn\u0027t have memory, bootstrapping kmalloc()\ncaches resorts to fallback_alloc() which requires -\u003enodelists set for all\nnodes. Fix that by calling set_up_list3s() for CACHE_CACHE in\nkmem_cache_init().\n\nAs kmem_getpages() is called with GFP_THISNODE set, this used to work before\nbecause of breakage in 2.6.22 and before with GFP_THISNODE returning pages from\nthe wrong node if a node had no memory. So it may have worked accidentally and\nin an unsafe manner because the pages would have been associated with the wrong\nnode which could trigger bug ons and locking troubles.\n\nTested-by: Mel Gorman \u003cmel@csn.ul.ie\u003e\nTested-by: Olaf Hering \u003colaf@aepfle.de\u003e\nReviewed-by: Christoph Lameter \u003cclameter@sgi.com\u003e\nSigned-off-by: Pekka Enberg \u003cpenberg@cs.helsinki.fi\u003e\n[ With additional one-liner by Olaf Hering - Linus ]\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "eb36f4fc019835cecf0788907f6cab774508087b", "tree": "b834e3213c822735006c25f0c4f6e4ed6cafc181", "parents": [ "49914084e797530d9baaf51df9eda77babc98fa8" ], "author": { "name": "Karsten Keil", "email": "kkeil@suse.de", "time": "Fri Jan 25 11:55:28 2008 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 08:26:10 2008 -0800" }, "message": "fix oops on rmmod capidrv\n\nFix overwriting the stack with the version string\n(it is currently 10 bytes + zero) when unloading the\ncapidrv module. Safeguard against overwriting it\nshould the version string grow in the future.\n\nShould fix Kernel Bug Tracker Bug 9696.\n\nSigned-off-by: Gerd v. Egidy \u003cgerd.von.egidy@intra2net.com\u003e\nAcked-by: Karsten Keil \u003ckkeil@suse.de\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7bc5c414fe6627ec518c82d154c796f0981f5b02", "tree": "affd4857934df6c86b6fde572de0370700e6fe9a", "parents": [ "1b8177ec1e779bcc3ed89419ff7c80dbc3dcc489" ], "author": { "name": "Abhijith Das", "email": "adas@redhat.com", "time": "Fri Jan 18 14:06:37 2008 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:21:22 2008 +0000" }, "message": "[GFS2] Allow journal recovery on read-only mount\n\nThis patch allows gfs2 to perform journal recovery even if it is mounted\nread-only. Strictly speaking, a read-only mount should not be writing to\nthe filesystem, but we do this only to perform journal recovery. A\nread-only mount will fail if we don\u0027t recover the dirty journal. Also,\nwhen gfs2 is used as a root filesystem, it will be mounted read-only\nbefore being mounted read-write during the boot sequence. A failed\nread-only mount will panic the machine during bootup.\n\nSigned-off-by: Abhijith Das \u003cadas@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "1b8177ec1e779bcc3ed89419ff7c80dbc3dcc489", "tree": "f0bd7d9446dd5d6a90eada749ebb129caa4c6c0a", "parents": [ "b7fe2e391ee7b711d6dfd6a694d60c4f21113cbb" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Sat Jan 19 21:50:24 2008 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:21:04 2008 +0000" }, "message": "[GFS2] Lockup on error\n\nI spotted this bug while I was digging around. Looks like it could cause\na lockup in some rare error condition.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "b7fe2e391ee7b711d6dfd6a694d60c4f21113cbb", "tree": "4a5d141ffd4ae77dc6ce1a47b0bb8ce9d6d7c685", "parents": [ "3e5cd0877e6d2f059dc36b8206cb7e93938151db" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Thu Jan 17 15:12:03 2008 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:20:15 2008 +0000" }, "message": "[GFS2] Fix page_mkwrite truncation race path\n\nThere was a bug in the truncation/invalidation race path for\n-\u003epage_mkwrite for gfs2. It ought to return 0 so that the effect is the\nsame as if the page was truncated at any of the other points at which\nthe page_lock is dropped. This will result in the restart of the whole\npage fault path. If it was due to a real truncation (as opposed to an\ninvalidate because we let a glock go) then the -\u003efault path will pick\nthat up when it gets called again.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "3e5cd0877e6d2f059dc36b8206cb7e93938151db", "tree": "ac4de94b84c94d06864c7256bbc50dd264a62998", "parents": [ "1af535727bbf68e1da7ac232de47315da4c66ade" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Wed Jan 16 08:45:39 2008 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:19:51 2008 +0000" }, "message": "[GFS2] Fix typo\n\nThis patch fixes a minor typo. Surprisingly, it still compiled.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "1af535727bbf68e1da7ac232de47315da4c66ade", "tree": "ab24a9bc1271179fdae558d4f66e7ee0e401ce4c", "parents": [ "05220535196d413db434527a3edcba79b7187df8" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Wed Jan 16 14:24:05 2008 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:19:28 2008 +0000" }, "message": "[GFS2] Fix write alloc required shortcut calculation\n\nThe comparison was being made against the wrong quantity.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "05220535196d413db434527a3edcba79b7187df8", "tree": "5811b6f1caeac55102afb993f0b1538bbe9ed2b8", "parents": [ "598278bd4808ed81b0e6fa445458a7d549f72a32" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Fri Jan 11 13:44:50 2008 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:19:03 2008 +0000" }, "message": "[GFS2] gfs2_alloc_required performance\n\nThis is a small I/O performance enhancement to gfs2. (Actually, it is a rework of\nan earlier version I got wrong). The idea here is to check if the write extends\npast the last block in the file. If so, the function can save itself a lot of\ntime and trouble because it knows an allocate will be required. Benchmarks like\niozone should see better performance.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "598278bd4808ed81b0e6fa445458a7d549f72a32", "tree": "92a49c8fc86b2d87e853cc5a5c5407d1c8d6ae7e", "parents": [ "6dbd822487d0a9f14432cb4680415b80656b63a2" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Fri Jan 11 13:31:12 2008 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:18:44 2008 +0000" }, "message": "[GFS2] Remove unneeded i_spin\n\nThis patch removes a vestigial variable \"i_spin\" from the gfs2_inode\nstructure. This not only saves us memory (\u003e300000 of these in memory\nfor the oom test) it also saves us time because we don\u0027t have to\nspend time initializing it (i.e. slightly better performance).\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "6dbd822487d0a9f14432cb4680415b80656b63a2", "tree": "f0391d598c27cd7c39c67cfa13799a784f4c389a", "parents": [ "ac39aadd0440ae696e6dacaa8006ce1737b17008" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Thu Jan 10 15:18:55 2008 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:18:25 2008 +0000" }, "message": "[GFS2] Reduce inode size by moving i_alloc out of line\n\nIt is possible to reduce the size of GFS2 inodes by taking the i_alloc\nstructure out of the gfs2_inode. This patch allocates the i_alloc\nstructure whenever its needed, and frees it afterward. This decreases\nthe amount of low memory we use at the expense of requiring a memory\nallocation for each page or partial page that we write. A quick test\nwith postmark shows that the overhead is not measurable and I also note\nthat OCFS2 use the same approach.\n\nIn the future I\u0027d like to solve the problem by shrinking down the size\nof the members of the i_alloc structure, but for now, this reduces the\nimmediate problem of using too much low-memory on x86 and doesn\u0027t add\ntoo much overhead.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "ac39aadd0440ae696e6dacaa8006ce1737b17008", "tree": "d2a6784809c6bec674879dc865de4150e8b0fb01", "parents": [ "9656b2c14c6ee0806c90a6be41dec71117fc8f50" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Thu Jan 10 14:49:43 2008 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:18:03 2008 +0000" }, "message": "[GFS2] Fix assert in log code\n\nAlthough the values were all being calculated correctly, there was a\nrace in the assert due to the way it was using atomic variables. This\nchanges the value we assert on so that we get the same effect by testing\na different variable. This prevents the assert triggering when it shouldn\u0027t.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "9656b2c14c6ee0806c90a6be41dec71117fc8f50", "tree": "3e093571e695bf780885f36caec9594392da31fc", "parents": [ "0811a127cb83ad2e0355e5e3e30164d7ef0f2d65" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Tue Jan 08 08:14:30 2008 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:17:31 2008 +0000" }, "message": "[GFS2] Fix problems relating to execution of files on GFS2\n\nThis patch fixes a couple of problems which affected the execution of files\non GFS2. The first is that there was a corner case where inodes were not\nalways uptodate at the point at which permissions checks were being carried\nout, this was resulting in refusal of execute permission, but only on the\nfirst lookup, subsequent requests worked correctly. The second was a problem\nrelating to incorrect updating of file sizes which was introduced with the\nwrite_begin/end code for GFS2 a little while back.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\nCc: Abhijith Das \u003cadas@redhat.com\u003e\n" }, { "commit": "0811a127cb83ad2e0355e5e3e30164d7ef0f2d65", "tree": "f1e7eacb1a8a30e47299137db25be673621b9ee0", "parents": [ "e5d9dc278c7f79c220e4506cc1ade2efa2ca73fd" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Thu Jan 03 09:24:53 2008 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:17:04 2008 +0000" }, "message": "[GFS2] Initialize extent_list earlier\n\nHere is a patch for the latest upstream GFS2 code:\nThe journal extent map needs to be initialized sooner than it\ncurrently is. Otherwise failed mount attempts (e.g. not enough\njournals, etc.) may panic trying to access the uninitialized list.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "e5d9dc278c7f79c220e4506cc1ade2efa2ca73fd", "tree": "f984562ccb3b29f31fa1e63d4dfe1f01d8e74be7", "parents": [ "65a6290998f3d38b5c5e84423ae9e08bdd957095" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Thu Jan 03 11:31:38 2008 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:16:41 2008 +0000" }, "message": "[GFS2] Allow page migration for writeback and ordered pages\n\nTo improve performance on NUMA, we use the VM\u0027s standard page\nmigration for writeback and ordered pages. Probably we could\nalso do the same for journaled data, but that would need a\ncareful audit of the code, so will be the subject of a later\npatch.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "65a6290998f3d38b5c5e84423ae9e08bdd957095", "tree": "2263af7252e61281429115d63eaa8e019224e678", "parents": [ "ff91cc9bb41b62bc4ea7d5ced396fabf97539df9" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Wed Jan 02 10:16:56 2008 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:16:19 2008 +0000" }, "message": "[GFS2] Remove unused variable\n\nThe go_drop_th function is never called or referenced.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "ff91cc9bb41b62bc4ea7d5ced396fabf97539df9", "tree": "8e14975bba539c796cddb30853d76f0a0c2d060e", "parents": [ "fa3742fa8545df20e54aa0953a1873cca3a9bd92" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Dec 14 14:04:34 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:15:58 2008 +0000" }, "message": "[GFS2] Fix log block mapper\n\nA missing offset in the calculation.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "fa3742fa8545df20e54aa0953a1873cca3a9bd92", "tree": "12a52441aa753408af536919583ad3cfe59848ec", "parents": [ "c3f60b6e3a7667f78a63b15cf09655ecfca757fc" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Wed Dec 12 17:52:13 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:15:37 2008 +0000" }, "message": "[GFS2] Minor correction\n\nThis is a small correction to my previously posted patch1.\nIt just changes a divide to a shift. It\u0027s faster and doesn\u0027t\nintroduce odd dependencies on 32-bit compiles.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "c3f60b6e3a7667f78a63b15cf09655ecfca757fc", "tree": "8dbe2656098c1fa69a9e149248533e1fba131ac5", "parents": [ "b3513fca7e41965d85125c9770ce5f8fd4ff509a" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Wed Dec 12 11:44:41 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:15:16 2008 +0000" }, "message": "[GFS2] Eliminate the no longer needed sd_statfs_mutex\n\nThis patch eliminates the unneeded sd_statfs_mutex mutex but preserves\nthe ordering as discussed.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "b3513fca7e41965d85125c9770ce5f8fd4ff509a", "tree": "3747019335ccd0f91bf30bd4a85609db455d7214", "parents": [ "15c7cee7995a9013f1b2f31a15b70e1d2e8ae501" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Wed Dec 12 09:24:08 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:14:53 2008 +0000" }, "message": "[GFS2] Incremental patch to fix compiler warning\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "15c7cee7995a9013f1b2f31a15b70e1d2e8ae501", "tree": "22646442ffd942d77fc34f168d270e7bd2668643", "parents": [ "b0d5fd307463405fe1f57494fbb37f810715ed6d" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Tue Dec 11 19:29:17 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:14:33 2008 +0000" }, "message": "[GFS2] Function meta_read optimization\n\nThis patch optimizes function gfs2_meta_read. Basically, gfs2_meta_wait\nwas being called regardless of whether a disk read was requested.\nThis just pulls that wait into the if that triggers the read.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "b0d5fd307463405fe1f57494fbb37f810715ed6d", "tree": "2a627d7362a6db7eea4c388b0e0f0ceed8362fb5", "parents": [ "398bbe68321947f6763fbc259a01eb548ce19408" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Tue Dec 11 19:16:09 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:14:13 2008 +0000" }, "message": "[GFS2] Only fetch the dinode once in block_map\n\nFunction gfs2_block_map was often looking up the disk inode twice.\nThis optimizes it so that only does it once.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "398bbe68321947f6763fbc259a01eb548ce19408", "tree": "64cf07eb0f461aa5d26c2abdc873c8727d8a2bad", "parents": [ "5fdc2eeb5d1d3800367f471690b01fcd1fd5b963" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Tue Dec 11 19:13:54 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:13:52 2008 +0000" }, "message": "[GFS2] Reorganize function gfs2_glmutex_lock\n\nThis patch optimizes the function gfs2_glmutex_lock.\nThe basic theory is: Why bother initializing a holder, setting up\nwait bits and then waiting on them, if you know the glock can be\nyours. So the holder stuff is placed inside the if checking if the\nglock is locked. This one needs careful scrutiny because changing\nanything to do with locking should strike terror into one\u0027s heart.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "5fdc2eeb5d1d3800367f471690b01fcd1fd5b963", "tree": "d1e138b18a74541570736f933d938aa7f6e2d376", "parents": [ "0d0868bde33273a200b33e54f4fad6099ad0c566" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Tue Dec 11 19:00:16 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:13:31 2008 +0000" }, "message": "[GFS2] Run through full bitmaps quicker in gfs2_bitfit\n\nI eliminated the passing of an unused parameter into gfs2_bitfit called rgd.\n\nThis also changes the gfs2_bitfit code that searches for free (or used) blocks.\nBefore, the code was trying to check for bytes that indicated 4 blocks in\nthe undesired state. The problem is, it was spending more time trying to\ndo this than it actually was saving. This version only optimizes the case\nwhere we\u0027re looking for free blocks, and it checks a machine word at a time.\nSo on 32-bit machines, it will check 32-bits (16 blocks) and on 64-bit\nmachines, it will check 64-bits (32 blocks) at a time. The compiler\noptimizes that quite well and we save some time, especially when running\nthrough full bitmaps (like the bitmaps allocated for the journals).\n\nThere\u0027s probably a more elegant or optimized way to do this, but I haven\u0027t\nthought of it yet. I\u0027m open to suggestions.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "0d0868bde33273a200b33e54f4fad6099ad0c566", "tree": "482f3c72e582ce48b54c67760ca21e190f278ed4", "parents": [ "da6dd40d59fa9617ed697b90114e197036901632" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Tue Dec 11 18:51:25 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:13:01 2008 +0000" }, "message": "[GFS2] Get rid of useless \"found\" variable in quota.c\n\nThis just eliminates an unused variable from the quota code.\nNot likely to be a time saver.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "da6dd40d59fa9617ed697b90114e197036901632", "tree": "49e869021ed1f911bf3cdf185e9c4ce75c67f42a", "parents": [ "e9e1ef2b6ee401d7c1e1eb38052857b4b206d172" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Tue Dec 11 18:49:21 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:11:46 2008 +0000" }, "message": "[GFS2] Journal extent mapping\n\nThis patch saves a little time when gfs2 writes to the journals by\nkeeping a mapping between logical and physical blocks on disk.\nThat\u0027s better than constantly looking up indirect pointers in\nbuffers, when the journals are several levels of indirection\n(which they typically are).\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "e9e1ef2b6ee401d7c1e1eb38052857b4b206d172", "tree": "68dff93cf4058eb06b162d800f08ff7752cd1a55", "parents": [ "2066b58b0a038d7aedd24133677efb8856cac3a1" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Mon Dec 10 14:13:27 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:25 2008 +0000" }, "message": "[GFS2] Remove function gfs2_get_block\n\nThis patch is just a cleanup. Function gfs2_get_block() just calls\nfunction gfs2_block_map reversing the last two parameters. By\nreversing the parameters, gfs2_block_map() may be called directly\nand function gfs2_get_block may be eliminated altogether.\nSince this function is done for every block operation,\nthis streamlines the code and makes it a little bit more efficient.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "2066b58b0a038d7aedd24133677efb8856cac3a1", "tree": "0afb8a5ee7a9c1a0e4f618b818f8bd05ccd8c3a9", "parents": [ "dbee2199c37336e89060fbe9abdfd1ca8454372a" ], "author": { "name": "David Teigland", "email": "teigland@redhat.com", "time": "Thu Dec 06 09:35:25 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:23 2008 +0000" }, "message": "[GFS2] use pid for plock owner for nfs clients\n\nThe fl_owner is that of lockd when posix locks arrive from nfs\nclients, so it can\u0027t be used to distinguish between lock holders.\nUse fl_pid as owner instead; it\u0027s the pid of the process on the\nnfs client.\n\nSigned-off-by: David Teigland \u003cteigland@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "dbee2199c37336e89060fbe9abdfd1ca8454372a", "tree": "9005d78b7e6064016b8bc6c8ab8ae79442eb80ff", "parents": [ "292c8c14cace19c94c6abe25506310239daf949e" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Nov 30 08:17:15 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:20 2008 +0000" }, "message": "[GFS2] Remove unused variable\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "292c8c14cace19c94c6abe25506310239daf949e", "tree": "3b1b1407e00abc154768dc2f5a684b0fcf0cbd1f", "parents": [ "c97bfe4351771675963e02f34d31e206fd2d7150" ], "author": { "name": "Abhijith Das", "email": "adas@redhat.com", "time": "Thu Nov 29 14:13:54 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:18 2008 +0000" }, "message": "[GFS2] patch to check for recursive lock requests in gfs2_rename code path\n\nA certain scenario in the rename code path triggers a kernel BUG()\nbecause it accidentally does recursive locking The first lock is\nrequested to unlink an already existing inode (replacing a file) and the\nsecond lock is requested when the destination directory needs to alloc\nsome space. It is rare that these two\nevents happen during the same rename call, and even more rare that these\ntwo instances try to lock the same rgrp. It is, however, possible.\nhttps://bugzilla.redhat.com/show_bug.cgi?id\u003d404711\n\nSigned-off-by: Abhijith Das \u003cadas@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "c97bfe4351771675963e02f34d31e206fd2d7150", "tree": "9ee4de86cacc54f3e49135a4ce39cf7a236efb31", "parents": [ "bcd405599faa16cf32a3d3f1ce6a1e12cb37fede" ], "author": { "name": "Wendy Cheng", "email": "wcheng@redhat.com", "time": "Thu Nov 29 17:56:51 2007 -0500" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:15 2008 +0000" }, "message": "[GFS2] Remove lock methods for lock_nolock protocol\n\nGFS2 supports two modes of locking - lock_nolock for single node filesystem\nand lock_dlm for cluster mode locking. The gfs2 lock methods are removed from\nfile operation table for lock_nolock protocol. This would allow VFS to handle\nposix lock and flock logics just like other in-tree filesystems without\nduplication.\n\nSigned-off-by: S. Wendy Cheng \u003cwcheng@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "bcd405599faa16cf32a3d3f1ce6a1e12cb37fede", "tree": "216771f3a69086c8ccafa58a6d4449926f455336", "parents": [ "6a69a23f7df18f39e4a084e10b62ff4a144b05a5" ], "author": { "name": "Fabio M. Di Nitto", "email": "fabbione@ubuntu.com", "time": "Wed Nov 28 16:22:09 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:13 2008 +0000" }, "message": "[GFS2] Remove unrequired code\n\nSigned-off-by: Fabio M. Di Nitto \u003cfabbione@ubuntu.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "6a69a23f7df18f39e4a084e10b62ff4a144b05a5", "tree": "d5bc744a43f2f05aea7a419b3c93ea314397d311", "parents": [ "002ef1dc63ded14507c110d3cf83d0c3f51374ab" ], "author": { "name": "Fabio Massimo Di Nitto", "email": "fabbione@ubuntu.com", "time": "Tue Nov 27 06:16:42 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:11 2008 +0000" }, "message": "[GFS2] Fix build warnings\n\nHi Steven,\n\nSteven Whitehouse wrote:\n\u003e Hi,\n\u003e\n\u003e Now in the -nmw git tree. Thanks,\n\u003e\n\u003e Steve.\n\u003e\n\u003e On Wed, 2007-11-21 at 11:54 -0600, Ryan O\u0027Hara wrote:\n\nthis patch introduces a bunch of build warnings by leaving around\n\nstruct inode *inode \u003d \u0026ip-\u003ei_inode;\n\nThe patch in attachment cleans them up. Please apply.\n\nSigned-off-by: Fabio Massimo Di Nitto \u003cfabbione@ubuntu.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "002ef1dc63ded14507c110d3cf83d0c3f51374ab", "tree": "c81a66cdd0b8bf49a515141c669a2600e7b01140", "parents": [ "1a2781cfa5ed8eb82bb311d684f268c1822dae69" ], "author": { "name": "Ryan O\u0027Hara", "email": "rohara@redhat.com", "time": "Wed Nov 21 11:54:54 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:08 2008 +0000" }, "message": "[GFS2] remove unnecessary permission checks\n\nRemove read/write permission() checks from xattr operations.\nVFS layer is already handling permission for xattrs via the\nxattr_permission() call, so there is no need for gfs2 to\ncheck permissions. Futhermore, using permission() for SELinux\nxattrs ops is incorrect.\n\nSigned-off-by: Ryan O\u0027Hara \u003crohara@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "1a2781cfa5ed8eb82bb311d684f268c1822dae69", "tree": "d65a551d4e0b8b12365fd150fe70cfd9f14f80e2", "parents": [ "00c134756c5ad570a1ad3d6f93a67fc9c25a67ea" ], "author": { "name": "Fabio Massimo Di Nitto", "email": "fabbione@ubuntu.com", "time": "Fri Nov 16 09:50:40 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:06 2008 +0000" }, "message": "[GFS2] Fix runtime issue with UP kernels\n\nThe issue is indeed UP vs SMP and it is totally random.\n\nspin_is_locked() is a bad assertion because there is no correct answer on UP.\non UP spin_is_locked() has to return either one value or another, always.\n\nThis means that in my setup I am lucky enough to trigger the issue and your you\nare lucky enough not to.\n\nthe patch in attachment removes the bogus calls to BUG_ON and according to David\n(in CC and thanks for the long explanation on the problem) we can rely upon\nthings like lockdep to find problem that might be trying to catch.\n\nSigned-off-by: Fabio M. Di Nitto \u003cfabbione@ubuntu.com\u003e\nCc: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "00c134756c5ad570a1ad3d6f93a67fc9c25a67ea", "tree": "36176240919582d17d4655a1838e1b934ede9cb8", "parents": [ "0b7580c786a5feda6291fe68ead3a1b92b6b35b8" ], "author": { "name": "David Teigland", "email": "teigland@redhat.com", "time": "Thu Nov 15 09:01:13 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:04 2008 +0000" }, "message": "[GFS2] tidy up error message\n\nPrint error with log_error() to be consistent with others.\n\nSigned-off-by: David Teigland \u003cteigland@redhat.com\u003e\nSigned-off-by: Fabio M. Di Nitto \u003cfabbione@ubuntu.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "0b7580c786a5feda6291fe68ead3a1b92b6b35b8", "tree": "baa74404abb5166fd7a3f3601c724ff1d9fc94db", "parents": [ "e35b921185728850c5db3b5d5b356178f931a157" ], "author": { "name": "Fabio Massimo Di Nitto", "email": "fabbione@ubuntu.com", "time": "Thu Nov 15 13:48:52 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:08:01 2008 +0000" }, "message": "[GFS2] Check for installation of mount helpers for DLM mounts\n\nThe patch is a fix to abort mount if the mount.gfs* and possible\numount.* are missing from /sbin.\n\nWhile we do what we can to guarantee that they are installed properly in\nuserland (CVS HEAD), we want to make sure that mount still aborts properly.\n\nThe only sign of missing helpers is that lock_dlm will receive no mount options\nat all. According to David the problem does not exist for lock_nolock as the\nhelpers are not required.\n\nThe patch has been tested for both gfs and gfs2 and it works as expected. The\nlack of mount.gfs* will generate an error that is propagated to mount:\n\noot@node1:~# mount -t gfs2 /dev/nbd2 /mnt/\nmount: wrong fs type, bad option, bad superblock on /dev/nbd2,\n missing codepage or helper program, or other error\n In some cases useful info is found in syslog - try\n dmesg | tail or so\n\n[ 3513.303346] GFS2: fsid\u003d: Trying to join cluster \"lock_dlm\", \"gutsy:gfs2\"\n[ 3513.304546] DLM/GFS2/GFS ERROR: (u)mount helpers are not installed properly!\n[ 3513.306290] GFS2: fsid\u003d: can\u0027t mount proto\u003dlock_dlm, table\u003dgutsy:gfs2, hostdata\u003d\n\nYou might want to notice that it will also avoid mount to hang or fail silently\nor with strange errors that will require the cluster to reboot/restart before\nyou can actually mount the filesystem again.\n\nSigned-off-by: Fabio M. Di Nitto \u003cfabbione@ubuntu.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "e35b921185728850c5db3b5d5b356178f931a157", "tree": "1f5586886b1a81fe961425da3ccc9fde8f40b538", "parents": [ "ec69b188837a347769e187997d040e84a683b38a" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Nov 09 10:07:21 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:59 2008 +0000" }, "message": "[GFS2] Don\u0027t periodically update the jindex\n\nWe only care about the content of the jindex in two cases,\none is when we mount the fs and the other is when we need\nto recover another journal. In both cases we have to update\nthe jindex anyway, so there is no point in updating it\nperiodically between times, so this removes it to simplify\ngfs2_logd.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "ec69b188837a347769e187997d040e84a683b38a", "tree": "d16ebc9b83807f99a114efe3a093315f9839b81c", "parents": [ "fd041f0b4045db8646b36d393cbb274db60649f5" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Nov 09 10:01:41 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:56 2008 +0000" }, "message": "[GFS2] Move gfs2_logd into log.c\n\nThis means that we can mark gfs2_ail1_empty static and prepares\nthe way for further changes.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "fd041f0b4045db8646b36d393cbb274db60649f5", "tree": "dd09e7317eb471d45c685e3269bd3c20dc686f3e", "parents": [ "2bcd610d2fdea608a8fdac32788fc35a32a2327c" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Thu Nov 08 14:55:03 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:54 2008 +0000" }, "message": "[GFS2] Use atomic_t for journal free blocks counter\n\nThis patch changes the counter which keeps track of the free\nblocks in the journal to an atomic_t in preparation for the\nfollowing patch which will update the log reservation code.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "2bcd610d2fdea608a8fdac32788fc35a32a2327c", "tree": "5b3753ff18c1da54bb860dbd67211e6abea78ca7", "parents": [ "8cbc4342478311c2a85260a7ca54d96cb7f71f7b" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Thu Nov 08 14:25:12 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:52 2008 +0000" }, "message": "[GFS2] Don\u0027t add glocks to the journal\n\nThe only reason for adding glocks to the journal was to keep track\nof which locks required a log flush prior to release. We add a\nflag to the glock to allow this check to be made in a simpler way.\n\nThis reduces the size of a glock (by 12 bytes on i386, 24 on x86_64)\nand means that we can avoid extra work during the journal flush.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "8cbc4342478311c2a85260a7ca54d96cb7f71f7b", "tree": "23a8ab6a4a2c154274d01cfe0e69715cd7ad4d86", "parents": [ "c7227e46423a57b4df27a2d75b5869bd3ae654d0" ], "author": { "name": "David Teigland", "email": "teigland@redhat.com", "time": "Wed Nov 07 09:03:56 2007 -0600" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:49 2008 +0000" }, "message": "[GFS2] check kthread_should_stop when waiting\n\nUse wait_event_interruptible() in the lock_dlm thread instead\nof an open coded equivalent, and include a kthread_should_stop()\ncheck in the wait test so we don\u0027t miss a kthread_stop().\n\nSigned-off-by: David Teigland \u003cteigland@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "c7227e46423a57b4df27a2d75b5869bd3ae654d0", "tree": "e0d1ce8a49d766f119358a721c38837776dcdaf5", "parents": [ "e589665eb97b297412fb16b4c1737a01a91db903" ], "author": { "name": "Bob Peterson", "email": "rpeterso@redhat.com", "time": "Fri Nov 02 09:37:15 2007 -0500" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:47 2008 +0000" }, "message": "[GFS2] Given device ID rather than s_id in \"id\" sysfs file\n\nThis patch changes the /sys/fs/gfs2/\u003cs_id\u003e/id file to give the device\nid \"major:minor\" rather than the s_id. That enables gfs2_tool to\nmatch devices properly (by id, not name) when locating the tuning files.\n\nSigned-off-by: Bob Peterson \u003crpeterso@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "e589665eb97b297412fb16b4c1737a01a91db903", "tree": "139a302a47bda6241d40a61bec1d7239de0e7108", "parents": [ "3042a2ccd68d2b609d283219e51cba363aa35c1d" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Nov 02 09:14:31 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:44 2008 +0000" }, "message": "[GFS2] Remove flags no longer required\n\nThe HIF_MUTEX and HIF_PROMOTE flags were set on the glock holders\ndepending upon which of the two waiters lists they were going to\nbe queued upon. They were then tested when the holders were taken\noff the lists to ensure that the right type of holder was being\ndequeued.\n\nSince we are already using separate lists, there doesn\u0027t seem a\nlot of point having these flags as well, and since setting them\nand testing them is in the fast path for locking and unlocking\nglock, this patch removes them.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "3042a2ccd68d2b609d283219e51cba363aa35c1d", "tree": "032653f2111bf20c1f4610d3801c42020c3a1abd", "parents": [ "52d4c74b08bf859f698ddb4e8a43c0dc8d4a0685" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Nov 02 08:39:34 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:42 2008 +0000" }, "message": "[GFS2] Reorder writeback for glock sync\n\nPreviously we were doing (write data, wait for data, write metadata, wait\nfor metadata). After this patch we so (write metadata, write data, wait for\ndata, wait for metadata) which should be more efficient.\n\nAlso I noticed that the drop_bh and xmote_bh functions were almost\nidentical. In fact the only difference was a single test, and that\ntest is such that in the drop_bh case, it would always evaluate to\nthe correct result. As such we can use the xmote_bh functions in\nall the places where we were using the drop_bh function and remove\nthe drop_bh functions.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "52d4c74b08bf859f698ddb4e8a43c0dc8d4a0685", "tree": "3454c250947bc4b19ee5410345d00fef20c98c8d", "parents": [ "c2932e03dbcfe7ea9052953dbd5f3157183c1e9b" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Thu Nov 01 09:34:14 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:40 2008 +0000" }, "message": "[GFS2] Add sync_page to metadata address space operations\n\nThis set of address space operations was missing a sync_page\noperation.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "c2932e03dbcfe7ea9052953dbd5f3157183c1e9b", "tree": "4d72603f5fc136a0ad0fd65b423045d5d30e69ef", "parents": [ "60b0d0877986b8fa70148f06055422d2ed858e88" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Thu Nov 01 09:26:54 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:37 2008 +0000" }, "message": "[GFS2] Remove \"reclaim limit\"\n\nThis call to reclaim glocks is not needed, and in particular we don\u0027t want it\nin the fast path for locking glocks. The limit was entirely arbitrary anyway\nand we can\u0027t expect users to adjust things like this, the remaining code will\ndo the right thing on its own.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "60b0d0877986b8fa70148f06055422d2ed858e88", "tree": "a3046f15ed803570554bad905ce690332dae8da8", "parents": [ "47e83b509127f5e83ae5d93afd5c7cb9241acc38" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Wed Oct 31 14:24:33 2007 +0000" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:35 2008 +0000" }, "message": "[GFS2] Remove unused variables\n\nThese haven\u0027t been used for some time, remove them.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "47e83b509127f5e83ae5d93afd5c7cb9241acc38", "tree": "8f4412df56f8d65c355e553e7437035d2386b963", "parents": [ "c41d4f09f13671f98ba4b82fdc94420cdc09be08" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Thu Oct 18 11:15:50 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:32 2008 +0000" }, "message": "[GFS2] Use correct include file in ops_address.c\n\nSomething changed in the upstream kernel, and it needs this\none-liner to allow ops_address.c to build.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "c41d4f09f13671f98ba4b82fdc94420cdc09be08", "tree": "d1a9701517d56673c869077520ea59be9d6dce64", "parents": [ "b8e7cbb65bcc99630e123422c6829ce3c0fcdf14" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Wed Oct 17 14:05:41 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:30 2008 +0000" }, "message": "[GFS2] Don\u0027t hold page lock when starting transaction\n\nThis is an addendum to the new AOPs work which moves the point\nat which we take the page lock so that we don\u0027t get it until\nthe last possible moment. This resolves a conflict between\nstarting transactions and the page lock.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "b8e7cbb65bcc99630e123422c6829ce3c0fcdf14", "tree": "a9f68259b90e9e65ea7f0369f448d580a8944f06", "parents": [ "9ff8ec32e58875022447af619bec6e5aee7c77e4" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Wed Oct 17 09:04:24 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:28 2008 +0000" }, "message": "[GFS2] Add writepages for GFS2 jdata\n\nThis patch resolves a lock ordering issue where we had been getting\na transaction lock in the wrong order with respect to the page lock.\nBy using writepages rather than just writepage, it is then possible\nto start a transaction before locking the page, and thus matching the\nlocking order elsewhere in the code.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "9ff8ec32e58875022447af619bec6e5aee7c77e4", "tree": "0c626762f334d1cc066113b3e47a2fa02a72af0c", "parents": [ "5561093e2cac9f7d2a77e39cc689b8d2b7f9b2bc" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Sep 28 13:49:05 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:25 2008 +0000" }, "message": "[GFS2] Split gfs2_writepage into three cases\n\nThis patch splits gfs2_writepage into separate functions for each of\nthe three cases: writeback, ordered and journalled. As a result\nit becomes a lot easier to see what each one is doing. The common\ncode is moved into gfs2_writepage_common.\n\nThis fixes a performance bug where we were doing more work than\nstrictly required in the ordered write case.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "5561093e2cac9f7d2a77e39cc689b8d2b7f9b2bc", "tree": "aac1fa3e47604f2d7bb1e4d9e97f41b8ffebe91e", "parents": [ "bf36a713169432643d4fc7eeb4e0ace96d791d26" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Wed Oct 17 08:47:38 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:23 2008 +0000" }, "message": "[GFS2] Introduce gfs2_set_aops()\n\nJust like ext3 we now have three sets of address space operations\nto cover the cases of writeback, ordered and journalled data\nwrites. This means that the individual operations can now become\nless complicated as we are able to remove some of the tests for\nfile data mode from the code.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "bf36a713169432643d4fc7eeb4e0ace96d791d26", "tree": "2cb69c9716b9ee8c687ef807bb88d5e635db3462", "parents": [ "e7e36f143565d14950055c893cfaf4400ad64d34" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Wed Oct 17 08:35:19 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:21 2008 +0000" }, "message": "[GFS2] Add gfs2_is_writeback()\n\nThis adds a function \"gfs2_is_writeback()\" along the lines of the\nexisting \"gfs2_is_jdata()\" in order to clean up the code and make\nthe various tests for the inode mode more obvious. It also fixes\nthe PageChecked() logic where we were resetting the flag too early\nin the case of an error path.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "e7e36f143565d14950055c893cfaf4400ad64d34", "tree": "972889a8329afc80d4bef454cf2800e042fa5cc6", "parents": [ "f91a0d3e24e4b0198be5fae20d45a35c40d1efce" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Tue Oct 16 11:47:04 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:18 2008 +0000" }, "message": "[GFS2] Remove unused field in struct gfs2_inode\n\nRemoves a field that is not used.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "f91a0d3e24e4b0198be5fae20d45a35c40d1efce", "tree": "cda8095f9befd25cbfaf5f63a4c8ca26870d45ca", "parents": [ "3cc3f710ce0effe397b830826a1a081fa81f11c7" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Mon Oct 15 16:29:05 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:16 2008 +0000" }, "message": "[GFS2] Remove useless i_cache from inodes\n\nThe i_cache was designed to keep references to the indirect blocks\nused during block mapping so that they didn\u0027t have to be looked\nup continually. The idea failed because there are too many places\nwhere the i_cache needs to be freed, and this has in the past been\nthe cause of many bugs.\n\nIn addition there was no performance benefit being gained since the\ndisk blocks in question were cached anyway. So this patch removes\nit in order to simplify the code to prepare for other changes which\nwould otherwise have had to add further support for this feature.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "3cc3f710ce0effe397b830826a1a081fa81f11c7", "tree": "53f69f1b8d1cbc2849c6bac08ce7786f3ecd7447", "parents": [ "51ff87bdd9f21a5d3672517b75d25ab5842d94a8" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Mon Oct 15 15:40:33 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:13 2008 +0000" }, "message": "[GFS2] Use -\u003epage_mkwrite() for mmap()\n\nThis cleans up the mmap() code path for GFS2 by implementing the\npage_mkwrite function for GFS2. We are thus able to use the\ngeneric filemap_fault function for our -\u003efault() implementation.\n\nThis now means that shared writable mappings will be much more\nefficiently shared across the cluster if there is a reasonable\nproportion of read activity (the greater proportion, the better).\n\nAs a side effect, it also reduces the size of the code, removes\nspecial cases from readpage and readpages, and makes the code\npath easier to follow.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "51ff87bdd9f21a5d3672517b75d25ab5842d94a8", "tree": "7a8de5720b2a63e8d7d03a940a2b06196b2a3776", "parents": [ "cc7e79b168a552152299bd8a8254dc099aacc993" ], "author": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Mon Oct 15 14:42:35 2007 +0100" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:11 2008 +0000" }, "message": "[GFS2] Clean up internal read function\n\nAs requested by Christoph, this patch cleans up GFS2\u0027s internal\nread function so that it no longer uses the do_generic_mapping_read\nfunction. This function is obsolete and GFS2 is the last user of it.\n\nAs a side effect the internal read code gets smaller and easier\nto read and gfs2_readpage is split into two. One function has the locking\nand the other function has the rest of the logic.\n\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\nCc: Christoph Hellwig \u003chch@infradead.org\u003e\n" }, { "commit": "cc7e79b168a552152299bd8a8254dc099aacc993", "tree": "65871c8ec495401846bc9e7030a89d3c6335f5ee", "parents": [ "49914084e797530d9baaf51df9eda77babc98fa8" ], "author": { "name": "Wendy Cheng", "email": "wcheng@redhat.com", "time": "Fri Oct 05 00:27:58 2007 -0400" }, "committer": { "name": "Steven Whitehouse", "email": "swhiteho@redhat.com", "time": "Fri Jan 25 08:07:09 2008 +0000" }, "message": "[GFS2] Handle multiple glock demote requests\n\nFix a race condition where multiple glock demote requests are sent to\na node back-to-back. This patch does a check inside handle_callback()\nto see whether a demote request is in progress. If true, it sets a flag\nto make sure run_queue() will loop again to handle the new request,\ninstead of erronously setting gl_demote_state to a different state.\n\nSigned-off-by: S. Wendy Cheng \u003cwcheng@redhat.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\n" }, { "commit": "d6c49a7a78fc841418bbd58bda504076f80ec51d", "tree": "db039655c3a4507047e17dc562defb546dbb9f50", "parents": [ "e4f586f280bbfa05c68f99df2db981356ee30533" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Thu Jan 24 16:56:53 2008 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:44 2008 +0100" }, "message": "[AVR32] extint: Set initial irq type to low level\n\nDavid Brownell pointed out a mismatch in the avr32 extint code:\n\n\u003e I noticed a small glitch that\u0027s not fixed by this patch: the\n\u003e initial type is falling edge, but IRQ_TYPE_NONE is mapped to\n\u003e IRQ_TYPE_LEVEL_LOW. Potentially surprising.\n\nFix it by setting the initial type (and handler) to low level,\nmatching the meaning of IRQ_TYPE_NONE.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "e4f586f280bbfa05c68f99df2db981356ee30533", "tree": "cfe3e267be1bea797ed881582d55fd5de443a8f3", "parents": [ "e7ba176b47db2ed53f258a6b4fe9d9fc6fa437a9" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Tue Dec 18 20:50:28 2007 -0800" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:44 2008 +0100" }, "message": "[AVR32] extint: change set_irq_type() handling\n\nUpdate the AVR32 EIC code to use the new __set_irq_handler_unlocked()\ncall, getting rid of one more instance of this widespread problem.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "e7ba176b47db2ed53f258a6b4fe9d9fc6fa437a9", "tree": "beb9ffab7da0c24f11c04b6eb4ca29b23b1dd07b", "parents": [ "f6135d12db4bed3b992052020f1c50d749cd8dc6" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Oct 10 14:58:29 2007 +0200" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:43 2008 +0100" }, "message": "[AVR32] NMI debugging\n\nChange the NMI handler to use the die notifier chain to signal anyone\nwho cares. Add a simple \"nmi debugger\" which hooks into this chain and\nthat may dump registers, task state, etc. when it happens.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "f6135d12db4bed3b992052020f1c50d749cd8dc6", "tree": "ef309fcd6354aee15710b8c4d9a569ce397da97a", "parents": [ "00625723428c23748668ca225e199a2c674c63f7" ], "author": { "name": "Jan Engelhardt", "email": "jengelh@computergmbh.de", "time": "Tue Jan 22 20:41:37 2008 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:43 2008 +0100" }, "message": "[AVR32] constify function pointer tables\n\nSigned-off-by: Jan Engelhardt \u003cjengelh@computergmbh.de\u003e\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "00625723428c23748668ca225e199a2c674c63f7", "tree": "95475ce239557ca799f404f91cbcb260f084056f", "parents": [ "f141035decdf8e3ce498991deee3984cb47426bf" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Jan 09 23:21:15 2008 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:43 2008 +0100" }, "message": "[AVR32] ATNGW100: Update defconfig\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "f141035decdf8e3ce498991deee3984cb47426bf", "tree": "ad28c3eb1811ed670597ddc918c58ee7952710b8", "parents": [ "e8897bfef2b056a527df21b25b602c59dbbad67a" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Jan 09 22:45:05 2008 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:43 2008 +0100" }, "message": "[AVR32] ATSTK1002: Update defconfig\n\nTurn off a few useless options, enable a few useful ones and enable\nquite a few new drivers.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "e8897bfef2b056a527df21b25b602c59dbbad67a", "tree": "6e5e4d0050e3d6ab53664456aa4847b5524b9f07", "parents": [ "78693e47a285dbfafabc85a42797660e4fe2967b" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Thu Nov 29 11:15:15 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:42 2008 +0100" }, "message": "[AVR32] Kconfig: Choose daughterboard instead of CPU\n\nRemove the CPU selection menu and instead let it be selected by the\nboard or daughterboard option. Add daughterboard selection for\nATSTK1000 (this was previously determined based on CPU type.)\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "78693e47a285dbfafabc85a42797660e4fe2967b", "tree": "9de9a4e63f059b1d91d748660f3935c5581abe4e", "parents": [ "64d81052671bc2e66efd46251883f5e8e3043db9" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Mon Oct 29 17:03:26 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:42 2008 +0100" }, "message": "[AVR32] Add support for ATSTK1003 and ATSTK1004\n\nATSTK1003 and ATSTK1004 are CPU daughterboards for ATSTK1000 featuring\nthe AT32AP7001 and AT32AP7002 CPUs, respectively.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "64d81052671bc2e66efd46251883f5e8e3043db9", "tree": "7a72e66dddc5174aa4b30a7112aa5e33f0f4d02d", "parents": [ "f4c41b2689eec03bd4f8145a08903862673e002b" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Mon Oct 29 16:24:09 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:42 2008 +0100" }, "message": "[AVR32] Clean up external DAC setup code\n\nReduce the ridiculous amount of #ifdef clutter in atstk1002.c a bit by\nmoving all the extdac stuff into its own function and providing an\nempty stub for the case when it isn\u0027t wanted.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "f4c41b2689eec03bd4f8145a08903862673e002b", "tree": "73926a1ba8dab66a10323ce3359245eee846273c", "parents": [ "438ff3f3cc33833206a48492e9d6674e4e82bed8" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Mon Oct 29 16:02:51 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:42 2008 +0100" }, "message": "[AVR32] ATSTK1000: Move gpio-leds setup to setup.c\n\nThere may be other boards than STK1002 that want to use the leds on\nSTK1000. Move it to stk1000 common code to make it easier to reuse.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "438ff3f3cc33833206a48492e9d6674e4e82bed8", "tree": "5159b43453c6a86949798af889d3cb0200818b74", "parents": [ "281ef58ccf62eaa6c4e4b7e4c0a3ee6b52e84e5b" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Mon Oct 29 15:28:07 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:41 2008 +0100" }, "message": "[AVR32] Add support for AT32AP7001 and AT32AP7002\n\nThese are derivatives of the AT32AP7000 chip, which means that most of\nthe code stays the same. Rename a few files, functions, definitions\nand config symbols to reflect that they apply to all AP700x chips, and\nexclude some platform devices from chips where they aren\u0027t present.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "281ef58ccf62eaa6c4e4b7e4c0a3ee6b52e84e5b", "tree": "a3a26fddcf6ffa0ffc8bda6d7e28ed9bd04aeb48", "parents": [ "2853ce5ecefe9d9ca119f33db0c23a3f075e35d9" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Dec 07 10:21:02 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:40 2008 +0100" }, "message": "[AVR32] Provide more CPU information in /proc/cpuinfo and dmesg\n\nAdd the following fields to /proc/cpuinfo:\n * chip type and revision (from the JTAG chip id)\n * cpu MHz (from clk_get_rate())\n * features (from the CONFIG0 register)\n\nAlso rename \"cpu family\" to \"cpu arch\" and \"cpu type\" to \"cpu core\" to\nremove some ambiguity.\n\nShow chip type and revision at bootup, and clarify that the other\nkinds of IDs that we\u0027re already printing are for the cpu core and\narchitecture. Rename \"AP7000\" to \"AP7\" since that\u0027s the name of the\ncore.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "2853ce5ecefe9d9ca119f33db0c23a3f075e35d9", "tree": "c321226cab8ab804411c1fd8d74fa88b53d5f165", "parents": [ "a7f5bf9b95ace39cd8b61e8c9ca1035966779ed1" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Jan 04 17:26:23 2006 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:40 2008 +0100" }, "message": "[AVR32] Oprofile support\n\nThis adds the necessary architecture code to run oprofile on AVR32\nusing the performance counters documented by the AVR32 Architecture\nManual.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nAcked-by: Philippe Elie \u003cphil.el@wanadoo.fr\u003e\n" }, { "commit": "a7f5bf9b95ace39cd8b61e8c9ca1035966779ed1", "tree": "a152580d6e8f87c44a292ea75bbf004e95b55c9f", "parents": [ "9e4e980b027c892b02a73d6ea0d01c197b818a32" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Oct 31 15:22:34 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:40 2008 +0100" }, "message": "[AVR32] Include instrumentation menu\n\nRemove KPROBES option from Kconfig.debug and include\nkernel/Kconfig.instrumentation.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "9e4e980b027c892b02a73d6ea0d01c197b818a32", "tree": "ed16f8cb0f0ff1555ef4ee7b4fe341b2ed5e3464", "parents": [ "13b54a50525a9685065684e1e11258d27dd27bdf" ], "author": { "name": "Hans-Christian Egtvedt", "email": "hcegtvedt@atmel.com", "time": "Mon Dec 03 10:43:28 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:40 2008 +0100" }, "message": "Disable VGA text console for AVR32 architecture\n\nThis patch disables the VGA text console for AVR32 architecture since\nit does not provide the vga.h include file.\n\nAVR32 users should use framebuffer console instead if they need a\nconsole on an attached display.\n\nSigned-off-by: Hans-Christian Egtvedt \u003chcegtvedt@atmel.com\u003e\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "13b54a50525a9685065684e1e11258d27dd27bdf", "tree": "5cc2dbceb4efff1810e5425617ce9bc850e1e8cb", "parents": [ "6ea6dd93c9454cc9521134f907bc970d09f460e4" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Tue Nov 27 13:50:45 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:39 2008 +0100" }, "message": "[AVR32] Enable debugging only when needed\n\nKeep track of processes being debugged (including the kernel itself)\nand turn the OCD system on and off as appropriate. Since enabling\ndebugging turns off some optimizations in the CPU core, this fixes the\nissue that enabling KProbes support or simply running a program under\ngdbserver will reduce system performance significantly until the next\nreboot.\n\nThe CPU performance will still be reduced for all processes while a\nprocess is being debugged, but this is a lot better than reducing the\nperformance forever.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "6ea6dd93c9454cc9521134f907bc970d09f460e4", "tree": "05f8d9f293d7127e19774d5fa10ebf685a6fa76d", "parents": [ "7f0f616bb093823b70855685cf085d39a8784818" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Tue Nov 27 13:02:40 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:39 2008 +0100" }, "message": "ptrace: Call arch_ptrace_attach() when request\u003dPTRACE_TRACEME\n\narch_ptrace_attach() is a hook that allows the architecture to do\nbook-keeping after a ptrace attach. This patch adds a call to this\nhook when handling a PTRACE_TRACEME request as well.\n\nCurrently only one architecture, m32r, implements this hook. When\ncalled, it initializes a number of debug trap slots in the ptraced\ntask\u0027s thread struct, and it looks to me like this is the right thing\nto do after a PTRACE_TRACEME request as well, not only after\nPTRACE_ATTACH. Please correct me if I\u0027m wrong.\n\nI want to use this hook on AVR32 to turn the debugging hardware on\nwhen a process is actually being debugged and keep it off otherwise.\nTo be able to do this, I need to intercept PTRACE_TRACEME and\nPTRACE_ATTACH, as well as PTRACE_DETACH and thread exit. The latter\ntwo can be handled by existing hooks.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "7f0f616bb093823b70855685cf085d39a8784818", "tree": "64dd565a8dd74c319947825ec8dbc7f8b873c46b", "parents": [ "3611553ef985ef7c5863c8a94641738addd04cff" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Nov 28 14:51:44 2007 +0100" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:39 2008 +0100" }, "message": "[AVR32] Remove redundant try_to_freeze() call from do_signal()\n\nget_signal_to_deliver() will call try_to_freeze(), so there\u0027s no point\nin do_signal() doing it as well.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "3611553ef985ef7c5863c8a94641738addd04cff", "tree": "5eca5f85e16514ee8c0c2122d74693073067c9a9", "parents": [ "49914084e797530d9baaf51df9eda77babc98fa8" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Thu Jul 05 17:08:09 2007 +0200" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Fri Jan 25 08:31:39 2008 +0100" }, "message": "[AVR32] Drop GFP_COMP for DMA memory allocations\n\ndma_alloc_coherent wants to split pages after allocation in order to\nreduce the memory footprint. This does not work well with GFP_COMP\npages, so drop this flag before allocation.\n\nThis patch was forward-ported from BSP 2.0\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "4a3ad20ccd8f4d2a0535cf98fa83f7b561ba59a9", "tree": "8d0d147716466801b859a777472246ee5563f64b", "parents": [ "e374a2bfebf359f846216336de91670be40499da" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 22:50:12 2008 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 22:50:12 2008 -0800" }, "message": "Driver core: coding style fixes\n\nFix up a number of coding style issues in the drivers/base/ directory\nthat have annoyed me over the years. checkpatch.pl is now very happy.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "e374a2bfebf359f846216336de91670be40499da", "tree": "809347b4814c63feb06409a7fe9ddfa9d631896b", "parents": [ "79a6ee42fd81be9abc6bdab08f932875924b26a5" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 21:59:04 2008 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 21:59:04 2008 -0800" }, "message": "Kobject: fix coding style issues in kobject c files\n\nClean up the kobject.c and kobject_uevent.c files to follow the\nproper coding style rules.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "79a6ee42fd81be9abc6bdab08f932875924b26a5", "tree": "108b8bf6b13c7d06ebaf6c25de97494457fc9ee9", "parents": [ "d462943afee8bff610258a82dba666e8ab72c9c8" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 21:27:06 2008 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 21:27:06 2008 -0800" }, "message": "Kobject: fix coding style issues in kobject.h\n\nFinally clean up the odd spaces and other mess in kobject.h\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d462943afee8bff610258a82dba666e8ab72c9c8", "tree": "9046b34170b01ca0a134be0e7ad498f97611e121", "parents": [ "5ed2c832ed256b18d90c2462369c62fd79312e6c" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 21:04:46 2008 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 21:04:46 2008 -0800" }, "message": "Driver core: fix coding style issues in device.h\n\nFinally clean up the odd spaces and other mess in device.h\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "5ed2c832ed256b18d90c2462369c62fd79312e6c", "tree": "3afce805114d8a580e66f9101ca36256d8c4c2dd", "parents": [ "9c7701088a61cc0cf8a6e1c68d1e74e3cc2ee0b7" ], "author": { "name": "Dave Young", "email": "hidave.darkstar@gmail.com", "time": "Tue Jan 22 15:14:18 2008 +0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 20:40:45 2008 -0800" }, "message": "spi: use class iteration api\n\nConvert to use the class iteration api.\n\nSigned-off-by: Dave Young \u003chidave.darkstar@gmail.com\u003e\nAcked-by: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "9c7701088a61cc0cf8a6e1c68d1e74e3cc2ee0b7", "tree": "477def1de51833a3d8c1b9e4b080b52fd51d51ab", "parents": [ "71da890509fec13d54329485bf5e4ac16b992bb6" ], "author": { "name": "Dave Young", "email": "hidave.darkstar@gmail.com", "time": "Tue Jan 22 14:01:34 2008 +0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 20:40:45 2008 -0800" }, "message": "scsi: use class iteration api\n\nConvert to use the class iteration api.\n\nSigned-off-by: Dave Young \u003chidave.darkstar@gmail.com\u003e\nCc: James Bottomley \u003cJames.Bottomley@hansenpartnership.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "71da890509fec13d54329485bf5e4ac16b992bb6", "tree": "dc9fd8cac1ad04454c8709b93d9f63bcdcc48750", "parents": [ "443cad920a1c6894da3de917ce02a194cc6d80ea" ], "author": { "name": "Dave Young", "email": "hidave.darkstar@gmail.com", "time": "Tue Jan 22 14:00:34 2008 +0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 20:40:44 2008 -0800" }, "message": "rtc: use class iteration api\n\nConvert to use the class iteration api.\n\nSigned-off-by: Dave Young \u003chidave.darkstar@gmail.com\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "443cad920a1c6894da3de917ce02a194cc6d80ea", "tree": "152e8d04111fbaabcdf4fbd16cde2ac555eec365", "parents": [ "73cf60232ef16e1f8a64defa97214a1722db1e6c" ], "author": { "name": "Dave Young", "email": "hidave.darkstar@gmail.com", "time": "Tue Jan 22 13:58:22 2008 +0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jan 24 20:40:44 2008 -0800" }, "message": "power supply : use class iteration api\n\nConvert to use the class iteration api.\n\nSigned-off-by: Dave Young \u003chidave.darkstar@gmail.com\u003e\nCc: Anton Vorontsov \u003ccbou@mail.ru\u003e\nCc: David Woodhouse \u003cdwmw2@infradead.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" } ], "next": "73cf60232ef16e1f8a64defa97214a1722db1e6c" }