)]}' { "log": [ { "commit": "2ce2cc1d40d8ca4e7a1bb2a4f69439dcffba2f07", "tree": "130edb39b47a60373d7906c93670c476fd2c58c6", "parents": [ "3c36baec814f388cb9803e76a2c11ff970a824b3" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Nov 02 15:40:29 2011 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Nov 14 10:17:15 2011 -0800" }, "message": "power: pm8921-bms: state of charge smoothing\n\nPrevent the bms from reporting a higher state of charge (SOC)\nwithout charging. Use the start_percent as an indicator whether\nthe battery was charged.\n\nChange-Id: Ibd664a3b6fc0f8edc2a99b5bed285465b86dc3c4\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "5b723abcfb09888a47cfd1562e5aa1acb7b2c2b4", "tree": "7e3dae47a23d09ff29f1ae03eaa152ee3cf891e0", "parents": [ "a0853126a900140e3d76ca5349d92035b4ed7c34", "51e947f6f540483f933b19ae733e54c3e7b35ae4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 14 01:36:17 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 14 01:36:17 2011 -0800" }, "message": "Merge changes I16265793,I214d563e into msm-3.0\n\n* changes:\n mfd: pm8xxx-misc: Add pm8xxx stay on API\n mfd: pm8xxx-misc: Add pm8xxx hard reset config API\n" }, { "commit": "a0853126a900140e3d76ca5349d92035b4ed7c34", "tree": "a1270a20e07493f437352866891ba35e35e47f07", "parents": [ "5827c55f07904356977f6fa7f1ad95717f3aa5e9" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Mon Nov 07 19:48:44 2011 -0800" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Sun Nov 13 21:34:56 2011 -0800" }, "message": "msm: camera: Convert VPE into platform device\n\nMake VPE platform devices as well as\nv4l2 sub-devices. They are created at system boot-up,\nand registered during camera open.\n\nThe subdevices are decoupled from the v4l2 devices by\nusing device model APIs to find and register them.\n\nChange-Id: I884b38f714df6f101d48b38219d274bf91fef4c6\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "5827c55f07904356977f6fa7f1ad95717f3aa5e9", "tree": "ea649a463ade5e56a14e671d2c819cedff721522", "parents": [ "e12c6674a3b7a51d55499252d6c713a5f1ea9b90" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri Oct 28 18:36:32 2011 -0700" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Sun Nov 13 21:34:40 2011 -0800" }, "message": "msm: camera: Convert VFE into platform device\n\nMake VFE platform devices as well as\nv4l2 sub-devices. They are created at system boot-up,\nand registered during camera open.\n\nThe subdevices are decoupled from the v4l2 devices by\nusing device model APIs to find and register them.\n\nChange-Id: I91a7144794505af23a6f32de58f1c7cc340f4882\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "e12c6674a3b7a51d55499252d6c713a5f1ea9b90", "tree": "6313690b780e13dfe464643c8da2eb89b4c35d16", "parents": [ "1477a2e938ac77575c2b7fc010e387f57498996b" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Wed Oct 26 11:55:26 2011 -0700" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Sun Nov 13 21:34:18 2011 -0800" }, "message": "msm: camera: Convert ISPIF into platform device\n\nMake ISPIF platform devices as well as\nv4l2 sub-devices. They are created at system boot-up,\nand registered during camera open.\n\nThe subdevices are decoupled from the v4l2 devices by\nusing device model APIs to find and register them.\n\nChange-Id: I0b1eed8e11cf2627775e5a1c9d848510d9cfd595\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "51e947f6f540483f933b19ae733e54c3e7b35ae4", "tree": "e5ca2325ccf0ce274208bc53be6062f3e66ced07", "parents": [ "a4262a3821dd2d8d2207298e2afe702cf60cdcd7" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 14:49:45 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Nov 14 08:19:17 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx stay on API\n\nThe API configures the PMIC to ignore the PS_HOLD low\nsignal, which can be used during debugging.\n\nChange-Id: I162657934e34da081eb897d64ffed36ad48e4eff\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "a4262a3821dd2d8d2207298e2afe702cf60cdcd7", "tree": "ad4c5c0e3e6a6eeecaaa96d9a898e963fba1ebdc", "parents": [ "f762c9a5eea642253519234c73129620b159e708" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Thu Nov 10 00:02:18 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Nov 14 08:19:05 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx hard reset config API\n\nThe API configures PMIC for different behaviour on hard reset.\nThe different options are to disable hard reset, shutdown or\nrestart on hard reset.\n\nChange-Id: I214d563e904dd7e73c98a454866718a60a11b6dd\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "c8b52e84bdda4e4b48a7e8c10f8bb39a8ed40418", "tree": "794389c38298ec0c2724b89c0c6a76b662bd7f7a", "parents": [ "f762c9a5eea642253519234c73129620b159e708" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Oct 25 23:20:21 2011 -0700" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Sun Nov 13 18:35:11 2011 -0800" }, "message": "msm: camera: Convert CSID into platform device\n\nMake CSID platform devices as well as\nv4l2 sub-devices. They are created at system boot-up,\nand registered during camera open.\n\nThe subdevices are decoupled from the v4l2 devices by\nusing device model APIs to find and register them.\n\nChange-Id: Icdb7d878456e749500b3e7a9e183997dba651cfd\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "5df5d4998328899bf34d5358c1c5302f0072fddf", "tree": "1eec1f3a17b092005bcd1b4484e73ac5cbedbe8d", "parents": [ "9c0357a86f40a158a019410794d3ae86c0f447a6", "0c61107a6dd884dab15341e460ee38d4ecd01846" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Nov 13 15:41:10 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Nov 13 15:41:10 2011 -0800" }, "message": "Merge \"usb: diag: Do not access all the channels from set_alt handler\" into msm-3.0" }, { "commit": "9c0357a86f40a158a019410794d3ae86c0f447a6", "tree": "7091445c8a468f8f591049aebc3559a9c7fbcd3d", "parents": [ "1721844a1140c20e232c7cb42eb25d8fd00104bf", "c26cd90a549e2687f498794e2e50435409ebc5ac" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "message": "Merge \"power: pm8921-charger: correct typo for TCHG_MAX mask\" into msm-3.0" }, { "commit": "1721844a1140c20e232c7cb42eb25d8fd00104bf", "tree": "59c72d375822eeb1d08e448fac3d9e187410e65f", "parents": [ "27e8d537199bbcb12cbc4003529944048deae187", "f6216f232914e80cfe6d10d9776dff77bc6316f8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "message": "Merge \"msm: camera: Convert CSIPHY into platform device\" into msm-3.0" }, { "commit": "27e8d537199bbcb12cbc4003529944048deae187", "tree": "7b53778b733473f3f4057c7b3112980f77cf09e1", "parents": [ "af0ac318cce9dfe3278d7c14e6d6c68ff4892b90", "a23c1cabcc3adce057d86deeb3efd6e31ec8c8c9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "message": "Merge changes I75853196,I9e677ebd,Id3802e37,Ic3fe2733 into msm-3.0\n\n* changes:\n mfd: pm8xxx-misc: Add pm8xxx watchdog reset control API\n mfd: pm8xxx-misc: Add pm8xxx smpl based API\u0027s\n mfd: pm8xxx-misc: Add the pm8xxx coincell chg API\n mfd: pm8xxx-misc: Add a ISR to handle 32 kHz OSC halt\n" }, { "commit": "acfeadedebc455fb0646f6c14951c3221ff02045", "tree": "65665d79ee055853112ffee8d758ee9f7320f53e", "parents": [ "724c5357ac317d081d46bc9bed1ffd65e0840983", "70385480d720ae447fe52b63734c2f76316c8496" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "message": "Merge \"msm: rmnet_bam: Add error logging\" into msm-3.0" }, { "commit": "c26cd90a549e2687f498794e2e50435409ebc5ac", "tree": "5a363e02e9c17cfce4fb607f365ce4c5d011ea48", "parents": [ "42474690f7498e77f7875c1ef33f31cc84f24aa6" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Oct 26 18:07:45 2011 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Sun Nov 13 10:02:27 2011 -0800" }, "message": "power: pm8921-charger: correct typo for TCHG_MAX mask\n\nCorrect the typo where a mask of 0x3F was used for setting\nTMAX_CHG. It should be 0x7F.\n\nCRs-Fixed: 315246\nChange-Id: I27e053fa1a47a08a6c553d619526acf85c8fc48c\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "4a93261358c94c1fe2b684e34cc652623f4b9ecd", "tree": "0be0fd3b6056ff7ef0500314cea7ade87ef8ad6d", "parents": [ "24987e2fcad0252a27cd41378d54f7cf4912a4ec", "9a05d96cd5b81de6cea7d0a76d46ac7a436bc2dd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Nov 12 04:29:14 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Nov 12 04:29:14 2011 -0800" }, "message": "Merge \"msm: camera: Fix couple of error cases.\" into msm-3.0" }, { "commit": "24987e2fcad0252a27cd41378d54f7cf4912a4ec", "tree": "c2572601d99d40d9d956118abdef2a476a3b7955", "parents": [ "12d9fc2547f00366dcb105b2d54e887b45fd4566", "327e0504eb27d62f852252c9e57c08ce66cb27b2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Nov 12 04:29:14 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Nov 12 04:29:14 2011 -0800" }, "message": "Merge \"bluetooth: release all the locks when BT is turned OFF\" into msm-3.0" }, { "commit": "12d9fc2547f00366dcb105b2d54e887b45fd4566", "tree": "78470c6d340efdd553903154ac6bd876d0d13bc0", "parents": [ "a2e3e32fd6f4b77ebd03330856baf79639b6229c", "132b276e885bb2e1969592a0e7dd3c78208c6292" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Nov 12 04:29:14 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Nov 12 04:29:14 2011 -0800" }, "message": "Merge \"usb: change minimum VDDCX voltage HSUSB to 1.045V\" into msm-3.0" }, { "commit": "a2e3e32fd6f4b77ebd03330856baf79639b6229c", "tree": "3eaa0e799da04d74fd16995addf77883be457ace", "parents": [ "13144e1b6522bad9b00edeb26077ae0ed2f0c70b", "996be18a0a1cc98fbf70d05ab99eb4343dacf9b9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 21:45:05 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 21:45:05 2011 -0800" }, "message": "Merge \"msm-camera: allow non-zero Y offset.\" into msm-3.0" }, { "commit": "72a2b5ddf538edeff41fecc1e702b26357875835", "tree": "1685345e1adf630f8f8c54cc3acacb3da194faef", "parents": [ "7805b5a4806ee0487ddeacd8b6e663d2f5da1ae4", "ae39c90df6023db71ee11b14be01873c7143e34e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 21:45:05 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 21:45:05 2011 -0800" }, "message": "Merge \"hwmon: pm8xxx-adc: Merge pm8921-adc and pm8xxx-adc\" into msm-3.0" }, { "commit": "327e0504eb27d62f852252c9e57c08ce66cb27b2", "tree": "704b6d73c6e79bc5cbcb013b3db8d554956260cf", "parents": [ "7a345d39c84e25903a40d0fde011a8c4bbc1a2b4" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Fri Nov 11 15:47:25 2011 -0800" }, "committer": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Fri Nov 11 16:59:36 2011 -0800" }, "message": "bluetooth: release all the locks when BT is turned OFF\n\nThis patch fixes the issue where a wakelock was not being\nreleased when BT was turned OFF, thus preventing the system\nto go in suspend state.\n\nChange-Id: I2fc68a078debe2bd5b3fc08d15af9570842b9c7d\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "a23c1cabcc3adce057d86deeb3efd6e31ec8c8c9", "tree": "b14f3bddc8f313c384fe1be0114f226fc2f2ade3", "parents": [ "bfbaf82d21c81fa975f5973eb7b12afcd9a6f77a" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 14:36:24 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Sat Nov 12 06:14:34 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx watchdog reset control API\n\nThe API configures PMIC to either shutdown or reset\nwhen the PS_HOLD line goes low.\n\nChange-Id: I758531966c08ec5acafaeedea13b59019aafa8bc\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "bfbaf82d21c81fa975f5973eb7b12afcd9a6f77a", "tree": "565d58b00a4b08b1b77907c31b6e16837178339b", "parents": [ "7b3822911a18dd01f072cfba227dfcbae6947585" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 14:28:34 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Sat Nov 12 06:14:14 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx smpl based API\u0027s\n\nAdd APIs to:\n1. Configure PMIC to reset/shutdown on a SMPL event\n2. Set SMPL delay time\n\nChange-Id: I9e677ebd5b4339b50e7d18e2ba0eb3af694c2d20\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "7b3822911a18dd01f072cfba227dfcbae6947585", "tree": "8c4a893a7ec10e3ec79277caf6c77542a9732948", "parents": [ "8b8f189be8ccc21e880802abd531b4ab9f03c601" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 14:08:34 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Sat Nov 12 06:13:39 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add the pm8xxx coincell chg API\n\nThe API enables/disables the coincell charger. It also configures\nthe coincell charger\u0027s voltage and register settings.\n\nThe charger allows the coincell (connected to VCOIN) to charge\nfrom VBAT.\n\nChange-Id: Id3802e37d8100e6a72de9fd263e7d201a7a346d2\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "8b8f189be8ccc21e880802abd531b4ab9f03c601", "tree": "e7263a451a363de7a2972726c875642bdc94a873", "parents": [ "42474690f7498e77f7875c1ef33f31cc84f24aa6" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Fri Nov 11 10:48:41 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Sat Nov 12 06:13:23 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add a ISR to handle 32 kHz OSC halt\n\nHandle the ISR and print a message to indicate the 32 kHz\nXTAL oscillator halt.\n\nChange-Id: Ic3fe2733af49d6b927a63be99f21091d0cb424b4\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "f6216f232914e80cfe6d10d9776dff77bc6316f8", "tree": "9c947888f06bede7ef4e968d5638673b127eca5c", "parents": [ "42474690f7498e77f7875c1ef33f31cc84f24aa6" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Oct 25 18:40:11 2011 -0700" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri Nov 11 16:34:09 2011 -0800" }, "message": "msm: camera: Convert CSIPHY into platform device\n\nMake CSIPHY platform devices as well as\nv4l2 sub-devices. They are created at system boot-up,\nand registered during camera open.\n\nThe subdevices are decoupled from the v4l2 devices by\nusing device model APIs to find and register them.\n\nChange-Id: Ie7cb68fb0ef41735c07ee2001b75cb6c139a3eb4\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "132b276e885bb2e1969592a0e7dd3c78208c6292", "tree": "cea05c0f2bb6327555b83e19db11701d9de6ea99", "parents": [ "7a345d39c84e25903a40d0fde011a8c4bbc1a2b4" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Fri Nov 11 16:09:20 2011 -0800" }, "committer": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Fri Nov 11 16:14:44 2011 -0800" }, "message": "usb: change minimum VDDCX voltage HSUSB to 1.045V\n\nAlthough usb can work at nominal voltage of 0.945, there could\nbe 100mV of IR drop. Hence set the usb phy min core voltage\nrequirement to 1.045V\n\nChange-Id: Ie6d84c8868dd068562fd1129e133c4eac2b7573d\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "42474690f7498e77f7875c1ef33f31cc84f24aa6", "tree": "a64f4cd9719e10da63d091990734cc9db4aff1a3", "parents": [ "ff1c4dcf4822952bc44846a3e62a86a60c792802", "32c72535219ff4de0b80bdb0e1c36ec5044f6201" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 16:10:44 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 16:10:44 2011 -0800" }, "message": "Merge \"Input: atmel_mxt_ts: Fix error handling in mxt_probe\" into msm-3.0" }, { "commit": "ff1c4dcf4822952bc44846a3e62a86a60c792802", "tree": "162f9671b5807703e457fee742c9a083e79e1565", "parents": [ "72b0085bed6ca223e8bad0b5b7a2f117c73b8262", "c324a794ba6fa711167feb8c5d32e6f9f636da30" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 16:10:44 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 16:10:44 2011 -0800" }, "message": "Merge \"platform-drivers: msm: sps: Support IRQ wakeup in SPS driver\" into msm-3.0" }, { "commit": "f6719199aff866be5c77f2ddcfd56539932dc1cf", "tree": "9db6bb58137217791e47ed0a9cedaf8ddba1b5d6", "parents": [ "cb4f6726310efa4abeff519aa89f77781f869aad" ], "author": { "name": "Deepak kotur", "email": "dkotur@codeaurora.org", "time": "Fri Oct 21 15:03:11 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 14:07:37 2011 -0700" }, "message": "vidc: Add ION support for Decoder and Encoder.\n\nIf ION is enabled in the platform, then use the ION api\u0027s\nto allocate memory, to get the virtual address and physical\naddress for decoder and encoder.\n\nChange-Id: I6372d14914de3a8f589fbcf45ffcee211fe563e3\nSigned-off-by: Deepak Kotur \u003cdkotur@codeaurora.org\u003e\n" }, { "commit": "c324a794ba6fa711167feb8c5d32e6f9f636da30", "tree": "609ab7301e6e17115f25ba181ef4394ffb24f685", "parents": [ "d468568da26db4570f14abb64f3dbc0725626ead" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Thu Nov 10 17:19:48 2011 -0800" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Fri Nov 11 11:44:49 2011 -0700" }, "message": "platform-drivers: msm: sps: Support IRQ wakeup in SPS driver\n\nChange-Id: Ibe994732dca2433db19445a92742d298ce15f1cf\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" }, { "commit": "d468568da26db4570f14abb64f3dbc0725626ead", "tree": "0e8a51cee2905d1332ada85b9b539f904e7870ff", "parents": [ "4c9af493aaf9c6dcee9edc926818381cc8c2b5df", "9e1bd643de6b6b3286bc058292f2165461bafc05" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 06:10:35 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 06:10:35 2011 -0800" }, "message": "Merge \"mfd: pm8xxx-misc: Move reset_pwr_off for pm8058\" into msm-3.0" }, { "commit": "4c9af493aaf9c6dcee9edc926818381cc8c2b5df", "tree": "6b8dcc9ca2898669b998166f4caa7ed997bb5290", "parents": [ "8acd7e0d96504bdf0e3055a5125ea4aeef12f2b0", "e8420ef3fb51fda0ee1b4f45b79f481d2c85f637" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 06:10:35 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 06:10:35 2011 -0800" }, "message": "Merge \"Revert \"usb: msm: 8x60: use PHY ID circuit for ID_GND to ID_A transistion\"\" into msm-3.0" }, { "commit": "a8ff291f8c5636e17d38d4ca15a270f581e02818", "tree": "f839cb120130b6e663696e96b6224babafeb8aba", "parents": [ "7100fec6f019f06781027860bf68cb0f18c878cb", "f6ed5588e1c8ff612870594e4538fde3345709cd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 06:10:35 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 06:10:35 2011 -0800" }, "message": "Merge \"usb: diag_bridge: Rename driver and functions for clarity\" into msm-3.0" }, { "commit": "0c61107a6dd884dab15341e460ee38d4ecd01846", "tree": "064ab556e85fd2333ed392ef9b726197ce134d42", "parents": [ "9574af945d3ff13fe47f61cec00abc92326934df" ], "author": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Fri Nov 11 17:40:05 2011 +0530" }, "committer": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Fri Nov 11 17:49:35 2011 +0530" }, "message": "usb: diag: Do not access all the channels from set_alt handler\n\nAccess contexts of only that diag channel for which set_alt is\ncalled. Otherwise, it might result in driver wrongly trying to\naccess a channel which is not included in the composition.\n\nChange-Id: I3380d710bb372d0e4377300f44322c0866be1bcc\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "70a10a34b7577511c2af6dc13ff8e919b3b87ecd", "tree": "c0178a8d0624c213d87b35eeb13568506400cbec", "parents": [ "d96832fbb361e6f21beda1afa338385ee500453b", "4cf7d3b8749a288cf502bce42972aa8c029deae0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 04:12:09 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 04:12:09 2011 -0800" }, "message": "Merge \"diag: Add download mode support for 9x15\" into msm-3.0" }, { "commit": "e8420ef3fb51fda0ee1b4f45b79f481d2c85f637", "tree": "6d85805a8e6fdd076e066c411dd28f9aac7f5cf3", "parents": [ "9574af945d3ff13fe47f61cec00abc92326934df" ], "author": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Fri Nov 11 15:37:21 2011 +0530" }, "committer": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Fri Nov 11 16:24:01 2011 +0530" }, "message": "Revert \"usb: msm: 8x60: use PHY ID circuit for ID_GND to ID_A transistion\"\n\nThis reverts commit ac7280d677ae4ff0649791dc37e799b505968df6.\n\nChange-Id: Ic27e91db47d80675dcd383fe20781358f4448cf2\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "9e1bd643de6b6b3286bc058292f2165461bafc05", "tree": "d8588b8326ddf109bce880d1a1fff0acde4e85d8", "parents": [ "9574af945d3ff13fe47f61cec00abc92326934df" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 13:57:40 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Fri Nov 11 14:41:16 2011 +0530" }, "message": "mfd: pm8xxx-misc: Move reset_pwr_off for pm8058\n\nMove the additional routines for pm8058_reset_pwr_off\nfrom core to misc driver\n\nChange-Id: I2346c812391d542dce0cd126a00cf9eda05d2494\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "dc8f757cac3c653186455ced1ed625ac5a17b8f6", "tree": "574ae530f15b00a6ff882c72671c6d1b5c7c3cb5", "parents": [ "a1c7f157dce950c1ce7f40fc84bef3b214569143" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Nov 10 16:38:05 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 21:06:00 2011 -0700" }, "message": "msm: kgsl: No need to expose internal functions.\n\nChange-Id: I8cb98c96ad000d511915ac5c7ac5a57fe59f7556\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "d3640f83c615eeab681c57cca88d8f4158f27e47", "tree": "cf434c3cb0c787bb0fcae4e331bffb318638687e", "parents": [ "e77beead9ce801b286ff2f47b7adf1330a914aa8", "1ad076d36a67547c348f26567c9cfbb35572aa24" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 19:31:34 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 19:31:34 2011 -0800" }, "message": "Merge changes Idd9ccb95,I6617ceba into msm-3.0\n\n* changes:\n usb: rmnet: close bam_mux channel in workqueue\n usb: rmnet: Use buffer levels as to flow control\n" }, { "commit": "e77beead9ce801b286ff2f47b7adf1330a914aa8", "tree": "ecdfdc9f73363d814950d87b0b7b306d3c9724e8", "parents": [ "ab12ea460a9c2e0ad89fd259082dd783194d7c52", "93c04f089072744e6d2dbb6876299306324eac41" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 19:31:34 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 19:31:34 2011 -0800" }, "message": "Merge changes Ied30595f,I46a03633 into msm-3.0\n\n* changes:\n platform-drivers: msm: sps: fix sleeping function called from atomic issue\n platform-drivers: msm: sps: remove dfab clock voting in SPS driver\n" }, { "commit": "1ad076d36a67547c348f26567c9cfbb35572aa24", "tree": "ecefaa65350a16d23b7808c576aae196ee9a59b4", "parents": [ "84579553a35e922a8316036dda422e2c71e337a8" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Thu Nov 10 15:03:30 2011 -0800" }, "committer": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Thu Nov 10 16:01:45 2011 -0800" }, "message": "usb: rmnet: close bam_mux channel in workqueue\n\nBAM mux driver could sleep during close function and usb driver\nis calling it from interrupt routine resulting in crash. Close\nbam mux channel in workqueue to avoid crash. Also check for\nusb cable connection status before opening bam channel.\n\nCRs-fixed: 316373\nChange-Id: Idd9ccb95006beedfb66613bb562028494481f827\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "84579553a35e922a8316036dda422e2c71e337a8", "tree": "876681341f326f08879acb43c2d95c96be79169f", "parents": [ "583a80e092403f4d965af9ba65afa3754d45dd61" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Wed Nov 09 15:33:22 2011 -0800" }, "committer": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Thu Nov 10 15:32:14 2011 -0800" }, "message": "usb: rmnet: Use buffer levels as to flow control\n\nusb bam mux driver enables flow control based on number of packets\npending by mux. Instead enable/disable flow control based internal\nbuffer levels to prevent buffer overflows.\n\nChange-Id: I6617cebaec2d6b7d0c3d903f391cdc90f1ce83b3\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "6da001547b8492fd479ddf624c79a88f61c121f7", "tree": "7db9ae43593c765dc1916a362025ee0bdbd416a8", "parents": [ "56c40edacb787824b7a5469a4c6992c148a8b7f7", "be7e45d97a3dcbd48fd593d82a293cf93b6e21c5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 15:29:30 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 15:29:30 2011 -0800" }, "message": "Merge \"qup_i2c: Fix for multiple write transactions\" into msm-3.0" }, { "commit": "26ab06bf47954879d991490d00256bba0c2d81e4", "tree": "0f328685054712a3663e748381dc827709a27049", "parents": [ "da53f7c70cfaf09d584970e91b60ea79292b2892", "4076384c0de9f6b7a25c41ec28cc60c26c3010f9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 15:29:30 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 15:29:30 2011 -0800" }, "message": "Merge \"msm: camera: fix goto LABEL name typo in camera driver\" into msm-3.0" }, { "commit": "f6ed5588e1c8ff612870594e4538fde3345709cd", "tree": "0c79d68489a869ef8bc00540a3727c79da562994", "parents": [ "583a80e092403f4d965af9ba65afa3754d45dd61" ], "author": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Nov 02 16:08:31 2011 -0700" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Thu Nov 10 14:01:33 2011 -0800" }, "message": "usb: diag_bridge: Rename driver and functions for clarity\n\nThis will hopefully disambiguate naming clashes between this bridge\ndriver and existing DIAG drivers.\n\n* Rename diag_usb.c to diag_bridge.c\n* Rename diag_{open,close,read,write} to diag_bridge_*\n* Rename Kconfig symbol\n* Fix module build\n\nChange-Id: Ia5b4884a7d85e2fa8f8c3865044a074a51e84adc\nSigned-off-by: Jack Pham \u003cjackp@codeaurora.org\u003e\n" }, { "commit": "583a80e092403f4d965af9ba65afa3754d45dd61", "tree": "1b83f264e2292b10d9458b8534f94e7535eea961", "parents": [ "6546c42d9666481e804bf407069ccc56e2b533da", "08e4133c008d91b6db7f44690246f196fb846a5f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 13:29:40 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 13:29:41 2011 -0800" }, "message": "Merge \"usb: change minimum VDDCX voltage HSUSB can tolerate to 0.945V\" into msm-3.0" }, { "commit": "387de83e7c9db57cfd02877a17852ad0f477596a", "tree": "9ff0b775b8b9d241598350e027e7d31ccee30237", "parents": [ "8069d642cc06df15052b339152244b78a09ae2bc", "07a0807c3edc707921e5ec3f2f64a54b94f3490c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 13:29:40 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 13:29:41 2011 -0800" }, "message": "Merge \"input: cyttsp-i2c: Move irq handler to threaded context\" into msm-3.0" }, { "commit": "69ce85ec593bcf01d069c741d46056c783514b1c", "tree": "8a08e7efc08a2878cddfdff05620295f6784cd3c", "parents": [ "8c460111a90790a27b6c704d13dddaf12dfc612a", "0dc15d251663b33a779207341eda3da69cfb4e24" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 13:29:40 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 13:29:41 2011 -0800" }, "message": "Merge \"msm: camera: Fix stray line issue on 8960 V2 device.\" into msm-3.0" }, { "commit": "db1e48f835fe1ae49420bd1427e587021a42dc07", "tree": "e0fb7ce593ebf573eeb54d39235bc53120b8cfef", "parents": [ "8a4b046ca8d53b137474d80ccce9915ac7908aac", "ac6b23da4be4176f9cf9b175b3872193305d69df" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 13:29:40 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 13:29:41 2011 -0800" }, "message": "Merge \"smsc911x: request_any_context_irq can return postive value upon success\" into msm-3.0" }, { "commit": "fd72eef7e285dd0b3e216f76bb7688fc7263de58", "tree": "c057af790b3cecef6b6e7da7a1ef41fa15842d8d", "parents": [ "89d5d6c47c760be8e980c06e2842e76413ee4d0a", "1801860c6622adc2ff6c3391092ea02d04436246" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "message": "Merge changes Id8440508,If012dcdb into msm-3.0\n\n* changes:\n msm: rotator: ion support in rotator driver\n msm-fb: display: ion framework support\n" }, { "commit": "89d5d6c47c760be8e980c06e2842e76413ee4d0a", "tree": "a6f9c26baf19fc1f627adf7b2be6455cc49d291a", "parents": [ "0e8a9c02f8b6730a509355b063a9e6c1e0b98789", "2d2a2c595ac579e285c3a69347989c72b175ff51" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "message": "Merge \"hwmon: msm_adc: Calibrate HK/XOADC\" into msm-3.0" }, { "commit": "0e8a9c02f8b6730a509355b063a9e6c1e0b98789", "tree": "3a49bc07d150ccf340b31a14cc018e5f4a51c1f5", "parents": [ "05bd56a010d41eacebc9c4b70ea5d7991a87d55c", "236aa5a95a2bb48cb4d34a92ca967aa7d5ffac84" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "message": "Merge \"power: pm8921-charger: report battery state based on fsm state\" into msm-3.0" }, { "commit": "3a3e9201a365a51cfec2d9962cd132d8cb88751c", "tree": "ed8a3963c20977de62db0c97916d21e57f0caab1", "parents": [ "18ab9ffa2a34f004e0e0c3d16ec25712ebf692b0", "2327c79153d00dcb2b15eadb07c0955f2c9f77b9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "message": "Merge changes I6c1cf9d0,I28416089 into msm-3.0\n\n* changes:\n usb: rmnet: Fix UL flow control with bam mux\n usb: rmnet: Update flow control thresholds for bam dmux\n" }, { "commit": "18ab9ffa2a34f004e0e0c3d16ec25712ebf692b0", "tree": "f3e73b0d50491421bae856a10217e15cfc583690", "parents": [ "80923d42a8bbaece2040d6bf0dd28dc4af5cd052", "81be67988ef149f601064a9e8e5d91705e636ff5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "message": "Merge \"msm_fb: display: update busy flag before check blt_addr\" into msm-3.0" }, { "commit": "80923d42a8bbaece2040d6bf0dd28dc4af5cd052", "tree": "4697b8a354f96b5f4b30cf0bc3cc52608fb7627a", "parents": [ "b564fa0e209be256b0276cd1748b8435105ddbc5", "bd4c384bd4bb9a3ea38bf62009a155b99c20b696" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "message": "Merge \"msm: bam_dmux: fix registration of platform devices\" into msm-3.0" }, { "commit": "1265051f66331d8174fbac0b2514616a04eab662", "tree": "79d1b54d4ed21a7d4940eb987ec2b5a72ae93817", "parents": [ "6c38b2ff7323233b50d6b2248e61e0767224afce", "596d4c29549f9e9a8d2909d6af21db56c718bdf0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "message": "Merge \"msm: kgsl: Count a percentage of _io time\" into msm-3.0" }, { "commit": "08e4133c008d91b6db7f44690246f196fb846a5f", "tree": "26cab23716131434bba9df18cf193981f3aa242f", "parents": [ "3b496c1180edf3a298e04dd9edf8535d6df49886" ], "author": { "name": "Anji jonnala", "email": "anjir@codeaurora.org", "time": "Thu Nov 10 12:57:43 2011 +0530" }, "committer": { "name": "Anji jonnala", "email": "anjir@codeaurora.org", "time": "Thu Nov 10 14:16:17 2011 +0530" }, "message": "usb: change minimum VDDCX voltage HSUSB can tolerate to 0.945V\n\nFrom 8960 target onwards, HSUSB PHY can operate normally\nat minimum of 0.945 VDDCX voltage. Hence change the minimum\noperating VDDCX voltage to 0.945V.\n\nChange-Id: I5af994256b5c090e02d78ffc7e74605261a9bb04\nSigned-off-by: Anji jonnala \u003canjir@codeaurora.org\u003e\n" }, { "commit": "3de8b9965e33d78d05a4807665cb0db9b7b85769", "tree": "62119c37a86c4f8b4f99e1857b1b9b43a919c460", "parents": [ "82154483f146623f3befe7ecfa564a19e5e5d343", "bab6b7ee8a65a87ae78160d707311618308528fa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 00:00:16 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 00:00:16 2011 -0800" }, "message": "Merge \"radio: iris: Fix a few possible coding errors\" into msm-3.0" }, { "commit": "82154483f146623f3befe7ecfa564a19e5e5d343", "tree": "acf819ffd6811708d06fcd066a28f1af371256b5", "parents": [ "3b496c1180edf3a298e04dd9edf8535d6df49886", "6a3a01ae8eca6d615ead5be9ed28720bc0c79dab" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 00:00:16 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 00:00:16 2011 -0800" }, "message": "Merge \"msm: 8660: audio: HDMI: Fix the HDMI DMA stop issue\" into msm-3.0" }, { "commit": "3b496c1180edf3a298e04dd9edf8535d6df49886", "tree": "dee1ca5437164f7a30c15533427a02313d67372e", "parents": [ "c7381f3f7f689e6faecd8ac8f7f9c65869082827", "84a0f51e2bfed1ea4dd43f4423a50aeeba61f94d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 22:58:40 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 09 22:58:40 2011 -0800" }, "message": "Merge \"msm: board-7x30: Add support to use new SDIO LPM APIs\" into msm-3.0" }, { "commit": "fca5c596a9bb09874e8f03667730a15e0e39c8b9", "tree": "3dae7bb72b0fa0b368d8cf1127b4eb07f5d415d5", "parents": [ "ce3ddedba4538187207275ebf51d01d41f6e8bc0", "d292ddd67b5eb550d02520403ea2ad1d72957189" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 22:58:40 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 09 22:58:40 2011 -0800" }, "message": "Merge \"vidc: 720p: Set DB line buffers in case of reconfig\" into msm-3.0" }, { "commit": "ae39c90df6023db71ee11b14be01873c7143e34e", "tree": "eb6e3484d860969e04155c10916cd6fa7513bd98", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Nov 09 17:54:31 2011 -0800" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Nov 09 22:07:10 2011 -0800" }, "message": "hwmon: pm8xxx-adc: Merge pm8921-adc and pm8xxx-adc\n\nMerge changes from pm8921-adc to pm8xxx-adc. The\nchanges are modification to the BTM lookup table\nto map voltage vs temperature instead of A/D word\nvs temperature and reverse calibration on the\ninput voltage read for BTM. Fix setting the\nmpp_scale value to avoid compile error.\n\nThis keeps the pm8xxx-adc and pm8921-adc\nfunctional code as the same except for the name\nchange allowing future patch to remove the\npm8921-adc driver.\n\nChange-Id: I03a0b809cd232f7fe8dff86248651c9a2593be29\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "1801860c6622adc2ff6c3391092ea02d04436246", "tree": "040e11e28eee817fe3a4253878fa11b8c5c4627b", "parents": [ "e69bed86ffa5b7cc05545fd986a21ebef5123775" ], "author": { "name": "Naseer Ahmed", "email": "naseer@codeaurora.org", "time": "Tue Oct 25 13:32:58 2011 -0700" }, "committer": { "name": "Naseer Ahmed", "email": "naseer@codeaurora.org", "time": "Wed Nov 09 18:10:07 2011 -0800" }, "message": "msm: rotator: ion support in rotator driver\n\nAdd support for ion memory heaps in the rotator\ndriver\n\nChange-Id: Id844050871e4aaa7fa0e0fc9d69646d6d9875b85\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\nSigned-off-by: Naseer Ahmed \u003cnaseer@codeaurora.org\u003e\n" }, { "commit": "9a05d96cd5b81de6cea7d0a76d46ac7a436bc2dd", "tree": "9238c94c1ded7a5427a82bb742c9d7b7a95dff37", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Mon Nov 07 15:29:10 2011 -0800" }, "committer": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Wed Nov 09 16:32:45 2011 -0800" }, "message": "msm: camera: Fix couple of error cases.\n\n- Currently we initialize the vb2 queue during\n set_format and release it during msm_close.\n This might cause problems if the application\n is doing resolution changes in the same camera\n instance, where there can be multiple formats\n within the single instance. So release the vb2\n queue when the application is unregistering\n the buffers and toggle initialized flag so that\n the vb2 queue is initialized again when the new\n format is set.\n- Also, display an error and return immediately\n without queueing the buffer, if the application\n erroneously queues a buffer after unregistering\n all the buffers.\n\nChange-Id: I1236d933991f5650b4982c8db715fd0fd81b53cd\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\nCRs-Fixed: 317429\n" }, { "commit": "e69bed86ffa5b7cc05545fd986a21ebef5123775", "tree": "07c0747261499c4c06ed53fee397a41a62c4865d", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Mon Oct 17 16:21:42 2011 -0700" }, "committer": { "name": "Naseer Ahmed", "email": "naseer@codeaurora.org", "time": "Wed Nov 09 15:19:07 2011 -0800" }, "message": "msm-fb: display: ion framework support\n\nAdd support for the ION memory manager\nto the framebuffer driver\n\nChange-Id: If012dcdbbc71eb0f7d4d429ad4789b3276d34a58\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\nSigned-off-by: Naseer Ahmed \u003cnaseer@codeaurora.org\u003e\n" }, { "commit": "236aa5a95a2bb48cb4d34a92ca967aa7d5ffac84", "tree": "8e1538e5cc15d1a5b96b63f96abe5f0e72c8c26c", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Nov 03 12:17:19 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 16:14:17 2011 -0700" }, "message": "power: pm8921-charger: report battery state based on fsm state\n\nThe current code looks at few irq states and reports the battery state.\nInstead map an fsm state to battery state and report that state instead.\nThis will be more accurate than the current method.\n\nChange-Id: I42bc2625fa43cf97d03801a0fcf6ad34eabc042e\nCRs-Fixed: 313654\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "70385480d720ae447fe52b63734c2f76316c8496", "tree": "c8cff83e0d95f2aefe03d95817d32386f16cb2d3", "parents": [ "bd4c384bd4bb9a3ea38bf62009a155b99c20b696" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Nov 09 10:33:51 2011 -0700" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Nov 09 16:07:35 2011 -0700" }, "message": "msm: rmnet_bam: Add error logging\n\nAdd error logging in failure scenarios since all errors are\nconverted to ENODEV in upper layers making debugging\ndifficult.\n\nChange-Id: I411c88ccf1eefd85946a3bc2593524894754e2d1\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "84a0f51e2bfed1ea4dd43f4423a50aeeba61f94d", "tree": "bdee488b111487264ce00d8382565e06c26ef5a6", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Sujith Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Mon Aug 29 09:57:03 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 15:11:14 2011 -0700" }, "message": "msm: board-7x30: Add support to use new SDIO LPM APIs\n\nAllow usage of LPM APIs published by SDIO_AL layer by setting\n-\u003eis_sdio_al_client \u003d 1 for SDC2 slot in svlte targets.\n\nChange-Id: I2d0e42d216dcadc35a33a2ee15ff2ee418802c45\nSigned-off-by: Sujith Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "596d4c29549f9e9a8d2909d6af21db56c718bdf0", "tree": "24e4a593d61a1824574962d40ff3a58bc6963103", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Wed Oct 19 18:04:01 2011 -0600" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Wed Nov 09 14:13:15 2011 -0700" }, "message": "msm: kgsl: Count a percentage of _io time\n\nCount different percentages based upon GPU frequency.\n\nChange-Id: Ia579f6705ff9858263f507bd4f3ba0f84b772554\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "996be18a0a1cc98fbf70d05ab99eb4343dacf9b9", "tree": "af3d5041a0decaa2902a24651fd493890eb9317b", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Sun Oct 16 16:04:23 2011 -0700" }, "committer": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Wed Nov 09 12:56:23 2011 -0800" }, "message": "msm-camera: allow non-zero Y offset.\n\nChange-Id: I73238a6cfac0feb146279516f78f4a51c74bc9e9\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "4cf7d3b8749a288cf502bce42972aa8c029deae0", "tree": "d7dfcdcb50347e7ef90797e424514a3e6263c6be", "parents": [ "65d49c0b764379a710f1f1671dd250173efb034b" ], "author": { "name": "Dixon Peterson", "email": "dixonp@codeaurora.org", "time": "Tue Nov 08 21:15:12 2011 -0800" }, "committer": { "name": "Dixon Peterson", "email": "dixonp@codeaurora.org", "time": "Wed Nov 09 12:23:32 2011 -0800" }, "message": "diag: Add download mode support for 9x15\n\nChange-Id: I97fc2d4269d7673794892dd7b1f0d6bd1bfd3ac8\nSigned-off-by: Dixon Peterson \u003cdixonp@codeaurora.org\u003e\n" }, { "commit": "ce3ddedba4538187207275ebf51d01d41f6e8bc0", "tree": "40a7daabf2b3c1f0442bc44221a849ac84a671db", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Fri Oct 14 18:44:45 2011 -0700" }, "committer": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Wed Nov 09 10:37:06 2011 -0800" }, "message": "msm: wfd: Adds WFD v4l2 capture driver.\n\nCaptures the mirrored output from mdp\nand passes it on to userspace. This\nis added to support wifi-display (WFD).\n\nChange-Id: Idcf1373ebae3b2107e4a9bb3ccc808be020d32c2\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "4076384c0de9f6b7a25c41ec28cc60c26c3010f9", "tree": "6a7937aa556acc865f8087bb3edfa9c4b476b49d", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Tue Nov 08 12:12:09 2011 -0800" }, "committer": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Wed Nov 09 09:51:41 2011 -0800" }, "message": "msm: camera: fix goto LABEL name typo in camera driver\n\nChange-Id: Id27347895908e30b54324d1a2c50d60a8e06aa3f\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\n" }, { "commit": "6a3a01ae8eca6d615ead5be9ed28720bc0c79dab", "tree": "cc16ac6b1d73983f32fce1f0e09974d25e5b0d23", "parents": [ "fc464f0f66087745862fd9e327a4a07d4859bc27" ], "author": { "name": "Deepa Madiregama", "email": "dmadireg@codeaurora.org", "time": "Fri Oct 28 06:34:17 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 06:54:40 2011 -0700" }, "message": "msm: 8660: audio: HDMI: Fix the HDMI DMA stop issue\n\nLPA_IF dma channel is disabled without checking the per count value.\nBecause of this dma channel is not functional after few iterations\nof continuous playback. Fix this issue by checking the dma per count\nvalue to stop before disabling the LPA_IF dma channel.\n\nChange-Id: Ie9e9a9337ca2c4b76cebd99cd3eb98137be85b89\nSigned-off-by: Deepa Madiregama \u003cdmadireg@codeaurora.org\u003e\n" }, { "commit": "ec2515fdcb3070e7ec80bf865b01e43c8015a43f", "tree": "5eb59edb11e2d0ce5603654f2a85125f66445574", "parents": [ "cacc07c6fba3de3714db89ba31aceb857d242013", "0c0b818423bcb9a3313847861cc6bcb9372ab84a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 05:50:49 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 09 05:50:49 2011 -0800" }, "message": "Merge \"mmc: msm_sdcc: enable power save mode for sd clock after voltage switch\" into msm-3.0" }, { "commit": "ff1fa7728d7db3b9aa34df53aa7c53f6406a9d63", "tree": "1aa6154a23c8f06dc394081919c73e451d4661ca", "parents": [ "fc464f0f66087745862fd9e327a4a07d4859bc27", "ac7280d677ae4ff0649791dc37e799b505968df6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 05:50:49 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 09 05:50:49 2011 -0800" }, "message": "Merge \"usb: msm: 8x60: use PHY ID circuit for ID_GND to ID_A transistions.\" into msm-3.0" }, { "commit": "0c0b818423bcb9a3313847861cc6bcb9372ab84a", "tree": "b69f4dbb71082e127ae6b2e12eae3f46b6145493", "parents": [ "109c29e7104bed0bed3cf9e61a48950c90a71c19" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Nov 03 10:51:20 2011 +0530" }, "committer": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Wed Nov 09 17:22:51 2011 +0530" }, "message": "mmc: msm_sdcc: enable power save mode for sd clock after voltage switch\n\nSD3.0 compliant SD cards require voltage switching in order to\noperate in UHS-I bus speed modes and as part of this voltage\nswitch sequence, driver is disabling the power save mode for\nSD card clock and after the voltage switch is completed,\nSD card clock can be put in power save mode but it is missing\nas of now.\n\nThis change enables the power save mode for SD card clock\nafter voltage switching is completed.\n\nChange-Id: I11fbfaafc117e4fda92a8208507fb3c8faf41181\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "fc464f0f66087745862fd9e327a4a07d4859bc27", "tree": "d278d34891a242ef9a0292392c3d9303878074aa", "parents": [ "109c29e7104bed0bed3cf9e61a48950c90a71c19" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Fri Nov 04 21:54:00 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 04:48:15 2011 -0700" }, "message": "usb: msm_otg: Vote for EXT_3P3V regulator for MHL connector\n\nIn case of 8960 Liquid, need to vote for EXT_3P3V regulator\nto avoid usb connection lost as MHL analog switch is powered\nby this regulator.\n\nChange-Id: Ifc36d7916a5407801fdf43357176efa264d160bd\nCRs-fixed: 315979\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "ac7280d677ae4ff0649791dc37e799b505968df6", "tree": "9463427a6ba5f45a5dbef3c023aadb43afde541d", "parents": [ "109c29e7104bed0bed3cf9e61a48950c90a71c19" ], "author": { "name": "Anji jonnala", "email": "anjir@codeaurora.org", "time": "Wed Nov 09 08:06:07 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 03:54:46 2011 -0700" }, "message": "usb: msm: 8x60: use PHY ID circuit for ID_GND to ID_A transistions.\n\nuAs PMIC can\u0027t generate detect ID_GND to ID_A transistions use PHY\nID circuit for ID_GND to ID_A and ID_A to ID_GND transistions.\n\nAs both PMIC ID pullup and PHY ID pullup can\u0027t be enabled at the same\ntime decouple enabling the PMIC MPP2(which will close FET for HSUSB PHY\nID detection) from configuring the PMIC ID IRQ.\nConfigure the PMIC ID IRQ upon cable disconnect and disable PHY ID\ncircuit.\nUpon cable connect, unconfigure the PMIC ID IRQ and enable PHY ID\ncircuit.\n\nChange-Id: I1639a389b07c30a5d678fa64ac2b1ba35b3a5ab2\nCRs-fixed: 312423\nSigned-off-by: Anji jonnala \u003canjir@codeaurora.org\u003e\n" }, { "commit": "370d1b765afccedfdb33c973b7819db41cf3e93d", "tree": "fa27d274e5eaf5f33ce498dd9d4b104d0304a750", "parents": [ "f94607ff6cccacfb8c011ff57542bc4ffb5866db", "24569026822f3804bd1ea0e91e5bc5169747278a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 02:46:21 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 09 02:46:21 2011 -0800" }, "message": "Merge \"msm: kgsl: suspend device when the display does off\" into msm-3.0" }, { "commit": "32c72535219ff4de0b80bdb0e1c36ec5044f6201", "tree": "3b04ba3421b3f60bd33244c6a094e4edc9154327", "parents": [ "4ef11a8fcbba9a056a722bdc56a6c4d8eb54be7b" ], "author": { "name": "Jing Lin", "email": "jinglin@codeaurora.org", "time": "Thu Nov 03 12:02:33 2011 -0700" }, "committer": { "name": "Jing Lin", "email": "jinglin@codeaurora.org", "time": "Tue Nov 08 23:22:36 2011 -0800" }, "message": "Input: atmel_mxt_ts: Fix error handling in mxt_probe\n\nFix out-of-order error handling of several error cases in mxt_probe.\nMake sure allocated memory is freed in mxt_initialize when an error\noccurs.\n\nChange-Id: I4331a71263b62ff6bdeaafbe6881e591b09d2ffc\nSigned-off-by: Jing Lin \u003cjinglin@codeaurora.org\u003e\n" }, { "commit": "07a0807c3edc707921e5ec3f2f64a54b94f3490c", "tree": "3b3673e511736494d1a50c8d484e31e0b2296634", "parents": [ "5ac52b025ce8670b49fb6737ca86646eb410fd12" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Fri Oct 21 13:04:21 2011 +0530" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Wed Nov 09 11:31:57 2011 +0530" }, "message": "input: cyttsp-i2c: Move irq handler to threaded context\n\nChange-Id: I60d038fc06c8f040cf2b69d6b65d9b8e210ff08b\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "85af455afe9246095f185639e8b81abc1f124efd", "tree": "cf2db65db29c96dfe98d3bb41269ff983cb73558", "parents": [ "4abeda89aadc1bd51caf06fca7ea0390f3583cbc" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Oct 25 15:07:58 2011 -0700" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Nov 08 21:45:41 2011 -0800" }, "message": "msm: camera: Add io utility file\n\nFile for io utility functions\nAdded generic function for handling clk enable/disable\n\nChange-Id: I1610234ab945c49adb579f237eaec9109afd4d03\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "4abeda89aadc1bd51caf06fca7ea0390f3583cbc", "tree": "2430e07b1c9eaedf8a08cde7955ee09f74c1bdd2", "parents": [ "e44293c85329d88f7cc60eb9f6a0de2e16adcb30", "0f03fd7aab77e2ed23874fc079149b08867a1c9e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 21:03:30 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 08 21:03:30 2011 -0800" }, "message": "Merge \"wcnss: remove obsolete define WCNSS_NV_NAME\" into msm-3.0" }, { "commit": "24569026822f3804bd1ea0e91e5bc5169747278a", "tree": "e12ac0ef132c29cbbfeb11c97b161d4a825d867b", "parents": [ "5ac52b025ce8670b49fb6737ca86646eb410fd12" ], "author": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Thu Oct 27 11:11:12 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 21:05:09 2011 -0700" }, "message": "msm: kgsl: suspend device when the display does off\n\nThis change saves leakage current when the display is\noff. In scenerios where a user is listening to an mp3\nthis feature stops the GPU as soon as the display goes\noff. The GPU is started again when the display comes\nback. The feature also avoids the GPU resuming when a\nemail sync happens while the device is suspended.\n\nThe change also disables NAP when the display is off.\nIt wakes 3d core to process user space requests when in\nslumber\n\nChange-Id: I65d17e937079a27b14d08be0a975d7ecf80b18ab\nCRs-fixed: 316579\nSigned-off-by: Suman Tatiraju \u003csumant@codeaurora.org\u003e\n" }, { "commit": "ca2762c7f2ef87aae138da94d958bb0140e019bf", "tree": "83b55b9ae3a75ebd1ed89e1ad65ffa1e3634f16f", "parents": [ "f7ed1d2816db02747c983c8d66039b927794dd8c", "a3c0d8264722f50994751510200f578b21b7262e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 19:02:39 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 08 19:02:39 2011 -0800" }, "message": "Merge \"power: pm8921-charger: Disable EOC FSM processing\" into msm-3.0" }, { "commit": "1900dc06f36eda74a40f4f200377e2bbced40a26", "tree": "98d258dfc756cb391c1bc6fd57f7aa1fee0db89a", "parents": [ "363899275cb2048fe105693c70a030d7b4e5af0f", "748a70ad755602593d35eb841b69d0fee35d3132" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 18:03:38 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 08 18:03:38 2011 -0800" }, "message": "Merge \"msm: camera: use ION for stats and userptr buffers in V4L2 driver.\" into msm-3.0" }, { "commit": "2327c79153d00dcb2b15eadb07c0955f2c9f77b9", "tree": "5c11cd1f863a24a778ff1eff58e800f0cae94c2c", "parents": [ "8f24f2514b9ac5c4450dfa419692b5e5cf3effa9" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Tue Nov 08 16:12:42 2011 -0800" }, "committer": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Tue Nov 08 17:47:14 2011 -0800" }, "message": "usb: rmnet: Fix UL flow control with bam mux\n\nCheck flow control threshold before queuing packets to bam mux to\navoid packet overflow and resulting errors from bam mux\n\nChange-Id: I6c1cf9d0f4b0f5a3f42eefef9687b517e84d0ace\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "8f24f2514b9ac5c4450dfa419692b5e5cf3effa9", "tree": "3777f2ae0f8a9ba5690681cac87db0d97ad99655", "parents": [ "65d49c0b764379a710f1f1671dd250173efb034b" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Wed Nov 02 11:46:08 2011 -0700" }, "committer": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Tue Nov 08 17:45:29 2011 -0800" }, "message": "usb: rmnet: Update flow control thresholds for bam dmux\n\nUSB driver maintains number of packets pending with bam mux driver\nand check with flow control thresholds to enable or disable flow\ncontrol. Default flow control enable threshold is set to 1000 ip\npackets. However bam dmux can hold only upto ~250 packets. This\nis causing lot of ip packets to be dropped instead of starting the\nflow control. Update the flow control enable threshold with 200 and\ndisable threshold with 125. Also changing module parameter names to\nbetter reflect usb bam mux driver.\n\nCRs-fixed: 316595\nChange-Id: I28416089680fe9d578ccebc48b0f4773007d3445\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "9a1d91ef990d5da2b29f0de1c8e5dad09e17bc31", "tree": "55b334bc6ca58926e35ea4c0e1add17a5db9b6f3", "parents": [ "c9a37a75e33cc6777c64758a416d1d987d5088ab", "45d88faada3a16c0a54433b1eda7da2d1f89396a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 16:38:39 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 08 16:38:39 2011 -0800" }, "message": "Merge \"usb: ehci: vote for lower vddcx voltage during low power mode\" into msm-3.0" }, { "commit": "4514a2bc770b93cc908442e780f304e1c1674a64", "tree": "7a925fee2503986debbce033a1203bd9f8eefd6c", "parents": [ "6448143bf64ebcd1d7fc5c98fc40794bdcb5b87d", "dcf9919244b01bbc73ab4c16c97ae1cd8d1d30fb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 16:38:39 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 08 16:38:39 2011 -0800" }, "message": "Merge \"FM: fix the bug where SMD interrupts might not be processed\" into msm-3.0" }, { "commit": "2d2a2c595ac579e285c3a69347989c72b175ff51", "tree": "3326c290b6824a9c63fd7e13d4ef4695324f51bd", "parents": [ "d39da5a41fb8728809fec30c72f798dee780af63" ], "author": { "name": "Vijayakumar Muthuvel Manickam", "email": "vmuthuve@codeaurora.org", "time": "Thu Oct 20 13:41:39 2011 -0700" }, "committer": { "name": "Vijayakumar Muthuvel Manickam", "email": "vmuthuve@codeaurora.org", "time": "Tue Nov 08 15:52:36 2011 -0800" }, "message": "hwmon: msm_adc: Calibrate HK/XOADC\n\nCalibration for HK/XOADC is done once at init by\nmsm_adc before the first ADC reading is processed.\n\nCalibration performed for every ADC read is expensive\nand not recommended. Remove support to request\ncalibration by ADC clients.\n\nAdd stubs for pmic8058 xoadc functions to fix\nfeaturization\n\nChange-Id: I7f0e165bddaa49c5daf33df5ed77428ccc1434c5\nSigned-off-by: Vijayakumar Muthuvel Manickam \u003cvmuthuve@codeaurora.org\u003e\n" }, { "commit": "bac187289c5faab8cf28ba9e8e461c49eca1b60c", "tree": "95850b82858ec5e42c6bfccf8927f6db6f53235c", "parents": [ "d32dc043fcb9f25cfc8f771603850513824bd0aa", "137575f88f7aeac4e9a4712ad02ee2babfbbe866" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 15:21:24 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 08 15:21:24 2011 -0800" }, "message": "Merge \"usb: otg: Fix usb_hs_system_clk to support PM suspned/resume\" into msm-3.0" }, { "commit": "bd4c384bd4bb9a3ea38bf62009a155b99c20b696", "tree": "0562f4839977676b61a883bc341d97950d49b906", "parents": [ "d1a1dde637ec5cd604d36cfc7312d7d61b966e2d" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue Nov 08 13:48:19 2011 -0700" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue Nov 08 13:51:11 2011 -0700" }, "message": "msm: bam_dmux: fix registration of platform devices\n\nFix incorrect checking of return code for platform\ndevice registration.\n\nCRs-fixed: 316420\nChange-Id: Ic2ef5dae096ab94244994b1514d73d04bb68af46\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "45aa979452e1a848f2cb419c7072b9f2603b2a13", "tree": "ab670ad4e8a2f6a4d9a4e0ae198c7c36bcfcf269", "parents": [ "a82e08c1282eadfa38a76124ce13c5fef4bddc06", "df8e9b247c9a5ffe67e2b416f3db36d1c8c72b28" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 12:31:33 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 08 12:31:33 2011 -0800" }, "message": "Merge \"Revert \"mmc: msm_sdcc: use DATA_PEND bit for write opration\"\" into msm-3.0" }, { "commit": "a82e08c1282eadfa38a76124ce13c5fef4bddc06", "tree": "29c46a35882c33fccc2ca04680c5a1be18d82c77", "parents": [ "d424dc0ee693ab50aea47c7996b21f04d31dfbbf", "81d5c8c9297bc53df1976528806ba6c78b0c739a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 12:31:33 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 08 12:31:33 2011 -0800" }, "message": "Merge \"power: isl9519q: Add isl95159q debugfs entries\" into msm-3.0" }, { "commit": "0dc15d251663b33a779207341eda3da69cfb4e24", "tree": "18a9d98c80c64e0a64f54ad57463a0be8600a2ab", "parents": [ "d1a1dde637ec5cd604d36cfc7312d7d61b966e2d" ], "author": { "name": "Ujwal Patel", "email": "ujwalp@codeaurora.org", "time": "Fri Nov 04 16:58:23 2011 -0700" }, "committer": { "name": "Ujwal Patel", "email": "ujwalp@codeaurora.org", "time": "Tue Nov 08 11:50:53 2011 -0800" }, "message": "msm: camera: Fix stray line issue on 8960 V2 device.\n\n8960 V2 has double buffer rolloff tables. While updating\nthese tables during preview, DMI bank selection is incorrect.\nFix DMI bank selection when PCA ROLLOFF UPDATE is called.\n\nChange-Id: I3d8be13b1d3ddce96303601022305c483c51a68c\n\nSigned-off-by: Ujwal Patel \u003cujwalp@codeaurora.org\u003e\n" }, { "commit": "a3c0d8264722f50994751510200f578b21b7262e", "tree": "7241eafdded056c8942045c310431b291952ce6e", "parents": [ "d1a1dde637ec5cd604d36cfc7312d7d61b966e2d" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Thu Nov 03 14:18:52 2011 -0700" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Tue Nov 08 10:35:35 2011 -0800" }, "message": "power: pm8921-charger: Disable EOC FSM processing\n\nDue to the premature firing of end of charging\ninterrupts pmic8921-charger fully relies on the\neoc_worker. To avoid having to reset BATFET we turn\noff FSM eoc processing.\n\nChange-Id: Ic18666e8d8596106a88870664f69fab4a7ccac95\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "45d88faada3a16c0a54433b1eda7da2d1f89396a", "tree": "9e0957b8cd8f8563ddd78cf4f269aea8477c45e4", "parents": [ "893e3b5c1b57a42095bdbb634f3d14fbcf469367" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Wed Nov 02 13:28:42 2011 -0700" }, "committer": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Tue Nov 08 10:08:17 2011 -0800" }, "message": "usb: ehci: vote for lower vddcx voltage during low power mode\n\nusb phy requires vddcx to be at 1.1V when operational. However,\nkeeping vddcx high all times will cause higher power consumption.\nHence, request for lower vddcx voltage during low power mode.\n\nChange-Id: I13465a65770b91178c82b722de9fb5fd132fe966\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "93c04f089072744e6d2dbb6876299306324eac41", "tree": "83f8289af0cad7e3bb97208d744e493b4a996055", "parents": [ "0446b43fb128a5c05eb630ca7d836b588466c349" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Mon Nov 07 17:33:16 2011 -0800" }, "committer": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Tue Nov 08 09:52:29 2011 -0800" }, "message": "platform-drivers: msm: sps: fix sleeping function called from atomic issue\n\nsps_disconnect() calls mutex inside spinlock protected code, and thus gets\nthe warning \"sleeping function called from invalid context\". Change\nspinlock to mutex in sps_disconnect().\n\nChange-Id: Ied30595f20d0f5976d53575138b072ba251fc10e\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" } ], "next": "d292ddd67b5eb550d02520403ea2ad1d72957189" }