)]}' { "log": [ { "commit": "6c8c44462ac8ac3f95929328f0c56e9e8b6dd524", "tree": "d8e8206cbcdff00eef515b5b9324aedb54a3f0da", "parents": [ "d946092000698fd204d82a9d239103c656fb63bf" ], "author": { "name": "Jiri Pirko", "email": "jpirko@redhat.com", "time": "Sat Apr 30 01:28:17 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 02 15:54:31 2011 -0700" }, "message": "Revert: veth: remove unneeded ifname code from veth_newlink()\n\n84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 (\"veth: remove unneeded\nifname code from veth_newlink()\") caused regression on veth\ncreation. This patch reverts the original one.\n\nReported-by: Michał Mirosław \u003cmirqus@gmail.com\u003e\nSigned-off-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d946092000698fd204d82a9d239103c656fb63bf", "tree": "6d043e823caaddbbbde50b79429d110169f22b28", "parents": [ "6fdbab9d93e04bfe71f2b3fde485d092e2ffe3ec" ], "author": { "name": "Rabin Vincent", "email": "rabin@rab.in", "time": "Sat Apr 30 08:29:27 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 02 15:50:58 2011 -0700" }, "message": "smsc95xx: fix reset check\n\nThe reset loop check should check the MII_BMCR register value for\nBMCR_RESET rather than for MII_BMCR (the register address, which also\nhappens to be zero).\n\nSigned-off-by: Rabin Vincent \u003crabin@rab.in\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6fdbab9d93e04bfe71f2b3fde485d092e2ffe3ec", "tree": "cd88b86a5b7b7c9c16f6fbdefd03b9d5310b41c6", "parents": [ "41c31f318a5209922d051e293c61e4724daad11c" ], "author": { "name": "Rafael J. Wysocki", "email": "rjw@sisk.pl", "time": "Thu Apr 28 11:02:15 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 02 15:44:17 2011 -0700" }, "message": "tg3: Fix failure to enable WoL by default when possible\n\ntg3 is supposed to enable WoL by default on adapters which support\nthat, but it fails to do so unless the adapter\u0027s\n/sys/devices/.../power/wakeup file contains \u0027enabled\u0027 during the\ninitialization of the adapter. Fix that by making tg3 use\ndevice_set_wakeup_enable() to enable wakeup automatically whenever\nWoL should be enabled by default.\n\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "983960b159a75621855283030d92a80bea92e071", "tree": "3f93525b4372ae650a4d8d1b84e27d5b4d0a40f3", "parents": [ "badb02953aac4af9993163e2a87be60f10700db9" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Mon May 02 09:59:29 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 02 14:42:55 2011 -0700" }, "message": "amd8111e: trivial typo spelling: Negotitate -\u003e Negotiate\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "badb02953aac4af9993163e2a87be60f10700db9", "tree": "2f60f9eeda84733423169aae6a84878b582502eb", "parents": [ "7cfd260910b881250cde76ba92ebe3cbf8493a8f", "16b345d89686ca0482a9ca741a1167def1abdd7f" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 02 12:21:47 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 02 12:21:47 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "2b5a4ace664cfe05c17bee60c4da66263a05fccf", "tree": "fcae796e9b40d1670649a198ec95e03009f9c902", "parents": [ "eee9700c5dd8fbac517c8c1e85c60b688bc311a9" ], "author": { "name": "artpol", "email": "artpol84@gmail.com", "time": "Wed Apr 27 17:49:14 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 29 13:57:32 2011 -0700" }, "message": "mii: add support of pause frames in mii_get_an\n\nAdd support of pause frames advertise in mii_get_an. This provides all drivers\nthat use mii_ethtool_gset to represent their own and Link partner flow control\nabilities in ethtool.\n\nSigned-off-by: Artem Polyakov \u003cartpol84@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "eee9700c5dd8fbac517c8c1e85c60b688bc311a9", "tree": "a714e66dfea1c9166d2b23f04c9000590593bd5c", "parents": [ "686f13bb17784fbf8595a59ff4e4bd707d5ae66f" ], "author": { "name": "Adam Jaremko", "email": "adam.jaremko@gmail.com", "time": "Thu Apr 28 07:41:18 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 29 12:41:59 2011 -0700" }, "message": "net: ftmac100: fix scheduling while atomic during PHY link status change\n\nSigned-off-by: Adam Jaremko \u003cadam.jaremko@gmail.com\u003e\nAcked-by: Po-Yu Chuang \u003cratbert@faraday-tech.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b3c914aa84f4e4bbb3efc8f41c359d96e5e932d2", "tree": "5b500f869ec00167f87a197900c9fddfe14ec362", "parents": [ "8333a46ad3877485e4d67ef499c6dda36bfd1f9a" ], "author": { "name": "Dan Williams", "email": "dcbw@redhat.com", "time": "Wed Apr 27 09:54:28 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 29 12:40:20 2011 -0700" }, "message": "usbnet: add support for some Huawei modems with cdc-ether ports\n\nSome newer Huawei devices (T-Mobile Rocket, others) have cdc-ether\ncompatible ports, so recognize and expose them.\n\nSigned-off-by: Dan Williams \u003cdcbw@redhat.com\u003e\nAcked-by: Oliver Neukum \u003coneukum@suse.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8333a46ad3877485e4d67ef499c6dda36bfd1f9a", "tree": "d4f94e094e1c7f342b6e53c6cc0819a051f5c149", "parents": [ "b3b270054b80e6195b1d2b2ce082239911261839" ], "author": { "name": "Neil Horman", "email": "nhorman@tuxdriver.com", "time": "Tue Apr 26 10:30:11 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 29 12:32:35 2011 -0700" }, "message": "bnx2: cancel timer on device removal\n\nThis oops was recently reported to me:\n\ninvalid opcode: 0000 [#1] SMP\nlast sysfs file:\n/sys/devices/pci0000:00/0000:00:01.0/0000:01:0d.0/0000:02:05.0/device\nCPU 1\nModules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg\nmicrocode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4\nshpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase\nscsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core\ndm_mod [last unloaded: bnx2]\n\nModules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg\nmicrocode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4\nshpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase\nscsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core\ndm_mod [last unloaded: bnx2]\nPid: 23900, comm: pidof Not tainted 2.6.32-130.el6.x86_64 #1 BladeCenter LS21\n-[797251Z]-\nRIP: 0010:[\u003cffffffffa058b270\u003e] [\u003cffffffffa058b270\u003e] 0xffffffffa058b270\nRSP: 0018:ffff880002083e48 EFLAGS: 00010246\nRAX: ffff880002083e90 RBX: ffff88007ccd4000 RCX: 0000000000000000\nRDX: 0000000000000100 RSI: dead000000200200 RDI: ffff8800007b8700\nRBP: ffff880002083ed0 R08: ffff88000208db40 R09: 0000022d191d27c8\nR10: 0000000000000000 R11: 0000000000000000 R12: ffff8800007b9bc8\nR13: ffff880002083e90 R14: ffff8800007b8700 R15: ffffffffa058b270\nFS: 00007fbb3bcf7700(0000) GS:ffff880002080000(0000) knlGS:0000000000000000\nCS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\nCR2: 0000000001664a98 CR3: 0000000060395000 CR4: 00000000000006e0\nDR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000\nDR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400\nProcess pidof (pid: 23900, threadinfo ffff8800007e8000, task ffff8800091c0040)\nStack:\n ffffffff81079f77 ffffffff8109e010 ffff88007ccd5c20 ffff88007ccd5820\n\u003c0\u003e ffff88007ccd5420 ffff8800007e9fd8 ffff8800007e9fd8 0000010000000000\n\u003c0\u003e ffff88007ccd5020 ffff880002083e90 ffff880002083e90 ffffffff8102a00d\nCall Trace:\n \u003cIRQ\u003e\n [\u003cffffffff81079f77\u003e] ? run_timer_softirq+0x197/0x340\n [\u003cffffffff8109e010\u003e] ? tick_sched_timer+0x0/0xc0\n [\u003cffffffff8102a00d\u003e] ? lapic_next_event+0x1d/0x30\n [\u003cffffffff8106f737\u003e] __do_softirq+0xb7/0x1e0\n [\u003cffffffff81092cc0\u003e] ? hrtimer_interrupt+0x140/0x250\n [\u003cffffffff81185f90\u003e] ? filldir+0x0/0xe0\n [\u003cffffffff8100c2cc\u003e] call_softirq+0x1c/0x30\n [\u003cffffffff8100df05\u003e] do_softirq+0x65/0xa0\n [\u003cffffffff8106f525\u003e] irq_exit+0x85/0x90\n [\u003cffffffff814e3340\u003e] smp_apic_timer_interrupt+0x70/0x9b\n [\u003cffffffff8100bc93\u003e] apic_timer_interrupt+0x13/0x20\n \u003cEOI\u003e\n [\u003cffffffff81211ba5\u003e] ? selinux_file_permission+0x45/0x150\n [\u003cffffffff81262a75\u003e] ? _atomic_dec_and_lock+0x55/0x80\n [\u003cffffffff812050c6\u003e] security_file_permission+0x16/0x20\n [\u003cffffffff811861c1\u003e] vfs_readdir+0x71/0xe0\n [\u003cffffffff81186399\u003e] sys_getdents+0x89/0xf0\n [\u003cffffffff8100b172\u003e] system_call_fastpath+0x16/0x1b\n\nIt occured during some stress testing, in which the reporter was repeatedly\nremoving and modprobing the bnx2 module while doing various other random\noperations on the bnx2 registered net device. Noting that this error occured on\na serdes based device, we noted that there were a few ethtool operations (most\nnotably self_test and set_phys_id) that have execution paths that lead into\nbnx2_setup_serdes_phy. This function is notable because it executes a mod_timer\ncall, which starts the bp-\u003etimer running. Currently bnx2 is setup to assume\nthat this timer only nees to be stopped when bnx2_close or bnx2_suspend is\ncalled. Since the above ethtool operations are not gated on the net device\nhaving been opened however, that assumption is incorrect, and can lead to the\ntimer still running after the module has been removed, leading to the oops above\n(as well as other simmilar oopses).\n\nFix the problem by ensuring that the timer is stopped when pci_device_unregister\nis called.\n\nSigned-off-by: Neil Horman \u003cnhorman@tuxdriver.com\u003e\nReported-by: Hushan Jia \u003chjia@redhat.com\u003e\nCC: Michael Chan \u003cmchan@broadcom.com\u003e\nCC: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nAcked-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "16b345d89686ca0482a9ca741a1167def1abdd7f", "tree": "3e3a9db573cadfa2b7f615e4ebcc525e0e26bf51", "parents": [ "bfd36103ec26599557c2bd3225a1f1c9267f8fcb" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Fri Apr 29 17:51:56 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Apr 29 15:24:15 2011 -0400" }, "message": "iwl4965: fix \"Received BA when not expected\"\n\nNeed to use broadcast sta_id for management frames, otherwise we broke\nBA session in the firmware and get messages like that:\n\n\"Received BA when not expected\"\n\nor (on older kernels):\n\n\"BA scd_flow 0 does not match txq_id 10\"\n\nThis fix regression introduced in 2.6.35 during station management\ncode rewrite by:\n\ncommit 2a87c26bbe9587baeb9e56d3ce0b4971bd777643\nAuthor: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nDate: Fri Apr 30 11:30:45 2010 -0700\n\n iwlwifi: use iwl_find_station less\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bfd36103ec26599557c2bd3225a1f1c9267f8fcb", "tree": "0fd0ea7d8678e0c1b59f3513ab8ce7c53da2c628", "parents": [ "f325757ab2812b42da4d690cf8da73c0e678368c" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Fri Apr 29 17:51:06 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Apr 29 15:24:15 2011 -0400" }, "message": "iwlagn: fix \"Received BA when not expected\"\n\nNeed to use broadcast sta_id for management frames, otherwise we broke\nBA session in the firmware and get messages like that:\n\n\"Received BA when not expected\"\n\nor (on older kernels):\n\n\"BA scd_flow 0 does not match txq_id 10\"\n\nThis fix regression introduced in 2.6.35 during station management\ncode rewrite by:\n\ncommit 2a87c26bbe9587baeb9e56d3ce0b4971bd777643\nAuthor: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nDate: Fri Apr 30 11:30:45 2010 -0700\n\n iwlwifi: use iwl_find_station less\n\nPatch partially resolve:\nhttps://bugzilla.kernel.org/show_bug.cgi?id\u003d16691\nHowever, there are still 11n performance problems on 4965 and 5xxx\ndevices that need to be investigated.\n\nCc: stable@kernel.org # 2.6.35+\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "68972efa657040f891c7eda07c7da8c8dd576788", "tree": "56e451d2101c37802fa043e41f55b8b5daad6b82", "parents": [ "7833aa05b8db63484b43b4b4c389cd4533140afb" ], "author": { "name": "Paul Stewart", "email": "pstew@chromium.org", "time": "Thu Apr 28 05:43:37 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 28 12:56:09 2011 -0700" }, "message": "usbnet: Resubmit interrupt URB if device is open\n\nResubmit interrupt URB if device is open. Use a flag set in\nusbnet_open() to determine this state. Also kill and free\ninterrupt URB in usbnet_disconnect().\n\n[Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git]\n\nSigned-off-by: Paul Stewart \u003cpstew@chromium.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f325757ab2812b42da4d690cf8da73c0e678368c", "tree": "ee1ad70684e18533b97d88b3c080809bd19a5f14", "parents": [ "1501b6764f0c363a9f1d72f9d422841f81f1bd8c" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Thu Apr 28 11:36:54 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 28 14:38:36 2011 -0400" }, "message": "iwl4965: fix \"TX Power requested while scanning\"\n\nFix the following:\n\nWARNING: at drivers/net/wireless/iwlegacy/iwl-4965.c:1128 \\\niwl4965_send_tx_power+0x61/0x102 [iwl4965]() Hardware name: [...]\nTX Power requested while scanning!\n\nPid: 5723, comm: kworker/u:28 Not tainted 2.6.39-0.rc4.4.fc14.x86_64 #1\nCall Trace:\n [\u003cffffffff8104e27b\u003e] warn_slowpath_common+0x85/0x9d\n [\u003cffffffffa02782e0\u003e] ? iwl4965_show_temperature+0x49/0x49 [iwl4965]\n [\u003cffffffff8104e336\u003e] warn_slowpath_fmt+0x46/0x48\n [\u003cffffffffa027712f\u003e] iwl4965_send_tx_power+0x61/0x102 [iwl4965]\n [\u003cffffffff81477e05\u003e] ? mutex_lock+0x36/0x50\n [\u003cffffffffa0278337\u003e] iwl4965_bg_txpower_work+0x57/0x73 [iwl4965]\n [\u003cffffffff810647f3\u003e] process_one_work+0x18d/0x286\n [\u003cffffffff81065a5e\u003e] worker_thread+0xfd/0x181\n [\u003cffffffff81065961\u003e] ? manage_workers.clone.16+0x172/0x172\n [\u003cffffffff81069036\u003e] kthread+0x82/0x8a\n [\u003cffffffff81480524\u003e] kernel_thread_helper+0x4/0x10\n [\u003cffffffff81068fb4\u003e] ? kthread_worker_fn+0x14b/0x14b\n [\u003cffffffff81480520\u003e] ? gs_change+0x13/0x13\n\nReported-and-tested-by: Paul Bolle \u003cpebolle@tiscali.nl\u003e\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1501b6764f0c363a9f1d72f9d422841f81f1bd8c", "tree": "22ad0ea3368c798f9e395646488d74eadf1467bf", "parents": [ "f61583941667c96d61fc6991b9f23307f9bfa87e" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Mon Apr 25 11:12:57 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 28 14:38:35 2011 -0400" }, "message": "iwlegacy: led stay solid on when no traffic\n\ncommit 5ed540aecc2aae92d5c97b9a9306a5bf88ad5574 change the led behavior\nfor iwlwifi driver; the side effect cause led blink all the time.\n\nModify the led blink table to fix this problem\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f61583941667c96d61fc6991b9f23307f9bfa87e", "tree": "558a510dd6c47516ea688cc3cc82e7bca6bc9851", "parents": [ "069f40fc07f6df3da325e7ea1698a0d6247983d5" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Tue Apr 19 22:49:29 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 28 14:38:35 2011 -0400" }, "message": "b43: trivial: update module info about ucode16_mimo firmware\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8c61d9d611cb5b290f1b4ac57c4631acfd6e3b5a", "tree": "0e8d3f1c5d9d8bc34d238e739ea57cd098560924", "parents": [ "9ac067a84efbc7f5570d4d93c3b303001d5e8b38" ], "author": { "name": "Hans Petter Selasky", "email": "hselasky@c2i.net", "time": "Sun Apr 24 22:35:19 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 24 22:35:19 2011 -0700" }, "message": "cdc_ncm: fix short packet issue on some devices\n\nThe default maximum transmit length for NCM USB frames should be so\nthat a short packet happens at the end if the device supports a length\ngreater than the defined maximum. This is achieved by adding 4 bytes\nto the maximum length so that the existing logic can fit a short\npacket there.\n\nSigned-off-by: Hans Petter Selasky \u003chselasky@c2i.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9ac067a84efbc7f5570d4d93c3b303001d5e8b38", "tree": "70e15fd0d471b0b9680f8ab7ee8d0f057e56d760", "parents": [ "e39aece7d41119c3d63f390420e00ab4d2a526a9", "953a12cc2889d1be92e80a2d0bab5ffef4942300" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 24 11:51:04 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 24 11:51:04 2011 -0700" }, "message": "Merge branch \u0027davem.r8169\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6\n" }, { "commit": "953a12cc2889d1be92e80a2d0bab5ffef4942300", "tree": "4ebb736e88c5629c39a23509db4955f047f0f645", "parents": [ "0b0dc0f17f98b59772ca6380c7d5ce4cc593a974" ], "author": { "name": "François Romieu", "email": "romieu@fr.zoreil.com", "time": "Sun Apr 24 17:38:48 2011 +0200" }, "committer": { "name": "Francois romieu", "email": "romieu@fr.zoreil.com", "time": "Sun Apr 24 17:42:57 2011 +0200" }, "message": "r8169: don\u0027t request firmware when there\u0027s no userspace.\n\nThe firmware is cached during the first successfull call to open() and\nreleased once the network device is unregistered. The driver uses the\ncached firmware between open() and unregister_netdev().\n\nSo far the firmware is optional : a failure to load the firmware does\nnot prevent open() to success. It is thus necessary to 1) unregister\nall 816x / 810[23] devices and 2) force a driver probe to issue a new\nfirmware load.\n\nSigned-off-by: Francois Romieu \u003cromieu@fr.zoreil.com\u003e\nFixed-by: Ciprian Docan \u003cdocan@eden.rutgers.edu\u003e\nCc: Realtek linux nic maintainers \u003cnic_swsd@realtek.com\u003e\n" }, { "commit": "e39aece7d41119c3d63f390420e00ab4d2a526a9", "tree": "4b81a22a533a4cc3ae2730305b9aea30cd635961", "parents": [ "13f172ff26563995049abe73f6eeba828de3c09d" ], "author": { "name": "Vladislav Zolotarov", "email": "vladz@broadcom.com", "time": "Sat Apr 23 07:44:46 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Apr 23 15:13:17 2011 -0700" }, "message": "bnx2x: fix UDP csum offload\n\nFixed packets parameters for FW in UDP checksum offload flow.\n\nDo not dereference TCP headers on non TCP frames.\nReported-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\n\nSigned-off-by: Dmitry Kravkov \u003cdmitry@broadcom.com\u003e\nSigned-off-by: Eilon Greenstein \u003ceilong@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "13f172ff26563995049abe73f6eeba828de3c09d", "tree": "deef6ba4f54596410ab873281709c7f46979ddc3", "parents": [ "1ed3aad141fe595673c20225a9e004730088be52" ], "author": { "name": "Neil Horman", "email": "nhorman@tuxdriver.com", "time": "Fri Apr 22 08:10:59 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 22 14:33:51 2011 -0700" }, "message": "netconsole: fix deadlock when removing net driver that netconsole is using (v2)\n\nA deadlock was reported to me recently that occured when netconsole was being\nused in a virtual guest. If the virtio_net driver was removed while netconsole\nwas setup to use an interface that was driven by that driver, the guest\ndeadlocked. No backtrace was provided because netconsole was the only console\nconfigured, but it became clear pretty quickly what the problem was. In\nnetconsole_netdev_event, if we get an unregister event, we call\n__netpoll_cleanup with the target_list_lock held and irqs disabled.\n__netpoll_cleanup can, if pending netpoll packets are waiting call\ncancel_delayed_work_sync, which is a sleeping path. the might_sleep call in\nthat path gets triggered, causing a console warning to be issued. The\nnetconsole write handler of course tries to take the target_list_lock again,\nwhich we already hold, causing deadlock.\n\nThe fix is pretty striaghtforward. Simply drop the target_list_lock and\nre-enable irqs prior to calling __netpoll_cleanup, the re-acquire the lock, and\nrestart the loop. Confirmed by myself to fix the problem reported.\n\nSigned-off-by: Neil Horman \u003cnhorman@tuxdriver.com\u003e\nCC: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1ed3aad141fe595673c20225a9e004730088be52", "tree": "dec75e69b602e677ba0e5231f2d3036663fbd66a", "parents": [ "f01cb5fbea1c1613621f9f32f385e12c1a29dde0", "069f40fc07f6df3da325e7ea1698a0d6247983d5" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 22 13:21:38 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 22 13:21:38 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "cb771838715b1c470bc5735bdae709b33b18e0ad", "tree": "9de4b9a992aa2a521bfba73b941310dd8e09ea60", "parents": [ "e74fbd030223e29d269f4be17e3dce6de38f4c28" ], "author": { "name": "Tim Gardner", "email": "timg@tpi.com", "time": "Wed Apr 20 09:00:49 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 21 21:04:32 2011 -0700" }, "message": "atl1c: Fix work event interrupt/task races\n\nThe mechanism used to initiate work events from the interrupt\nhandler has a classic read/modify/write race between the interrupt\nhandler that sets the condition, and the worker task that reads and\nclears the condition. Close these races by using atomic\nbit fields.\n\nCc: stable@kernel.org\nCc: Jie Yang \u003cjie.yang@atheros.com\u003e\nSigned-off-by: Tim Gardner \u003ctim.gardner@canonical.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e74fbd030223e29d269f4be17e3dce6de38f4c28", "tree": "3f514d7472679c6be3e1d7feae4a73c28bfeac56", "parents": [ "e965c05dabdabb85af0187952ccd75e43995c4b3" ], "author": { "name": "Ivan Vecera", "email": "ivecera@redhat.com", "time": "Thu Apr 21 00:20:04 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 21 17:36:00 2011 -0700" }, "message": "be2net: increment work_counter in be_worker\n\nThe commit 609ff3b (\"be2net: add code to display temperature of ASIC\")\nadds support to display temperature of ASIC but there is missing\nincrement of work_counter in be_worker. Because of this 1) the\nfunction be_cmd_get_die_temperature is called every 1 second instead\nof every 32 seconds 2) be_cmd_get_die_temperature is called, although\nit is not supported. This patch fixes this bug.\n\nSigned-off-by: Ivan Vecera \u003civecera@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e2a85aecebc03d165bc2dcd233deadd5dd97ea9f", "tree": "b10efdc196b4ae601a499f36ade2ed98492302fe", "parents": [ "a9cf73ea7ff78f52662c8658d93c226effbbedde" ], "author": { "name": "Andrea Galbusera", "email": "gizero@gmail.com", "time": "Thu Apr 21 02:21:21 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 21 16:59:30 2011 -0700" }, "message": "powerpc: Fix multicast problem in fs_enet driver\n\nmac-fec.c was setting individual UDP address registers instead of multicast\ngroup address registers when joining a multicast group.\nThis prevented from correctly receiving UDP multicast packets.\nAccording to datasheet, replaced hash_table_high and hash_table_low\nwith grp_hash_table_high and grp_hash_table_low respectively.\nAlso renamed hash_table_* with grp_hash_table_* in struct fec declaration\nfor 8xx: these registers are used only for multicast there.\n\nTested on a MPC5121 based board.\nBuild tested also against mpc866_ads_defconfig.\n\nSigned-off-by: Andrea Galbusera \u003cgizero@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "069f40fc07f6df3da325e7ea1698a0d6247983d5", "tree": "2717c5d0c0f1437e63b6d77565b1fd4dc39b13b2", "parents": [ "b25026981aecde3685dd0e45ad980fff9f528daa" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Wed Apr 20 16:01:46 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 20 16:05:59 2011 -0400" }, "message": "iwl4965: fix skb usage after free\n\nSince\n\ncommit a120e912eb51e347f36c71b60a1d13af74d30e83\nAuthor: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nDate: Fri Feb 19 15:47:33 2010 -0800\n\n iwlwifi: sanity check before counting number of tfds can be free\n\nwe use skb-\u003edata after calling ieee80211_tx_status_irqsafe(), which\ncould free skb instantly.\n\nOn current kernels I do not observe practical problems related with\nbug, but on 2.6.35.y it cause random system hangs when stressing\nwireless link, making bisection of other problems impossible.\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b25026981aecde3685dd0e45ad980fff9f528daa", "tree": "db9972ab6095d6bd57978d734810e26c733338ee", "parents": [ "243e6df4ed919880d079d717641ad699c6530a03" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Wed Apr 20 15:57:14 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 20 16:05:59 2011 -0400" }, "message": "iwlwifi: fix skb usage after free\n\nSince\n\ncommit a120e912eb51e347f36c71b60a1d13af74d30e83\nAuthor: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nDate: Fri Feb 19 15:47:33 2010 -0800\n\n iwlwifi: sanity check before counting number of tfds can be free\n\nwe use skb-\u003edata after calling ieee80211_tx_status_irqsafe(), which\ncould free skb instantly.\n\nOn current kernels I do not observe practical problems related with\nbug, but on 2.6.35.y it cause random system hangs when stressing\nwireless link.\n\nCc: stable@kernel.org # 2.6.32+\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nAcked-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2430af8b7fa37ac0be102c77f9dc6ee669d24ba9", "tree": "76199ce83fd1ef26f1438302fb2f4898f537531d", "parents": [ "6f4d6dc167a001267eeff18bdea0ce3e9108c662" ], "author": { "name": "Jiri Bohac", "email": "jbohac@suse.cz", "time": "Tue Apr 19 02:09:55 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 20 01:44:43 2011 -0700" }, "message": "bonding: 802.3ad - fix agg_device_up\n\nThe slave member of struct aggregator does not necessarily point\nto a slave which is part of the aggregator. It points to the\nslave structure containing the aggregator structure, while\ncompletely different slaves (or no slaves at all) may be part of\nthe aggregator.\n\nThe agg_device_up() function wrongly uses agg-\u003eslave to find the state\nof the aggregator. Use agg-\u003elag_ports-\u003eslave instead. The bug has\nbeen introduced by commit 4cd6fe1c6483cde93e2ec91f58b7af9c9eea51ad\n(\"bonding: fix link down handling in 802.3ad mode\").\n\nSigned-off-by: Jiri Bohac \u003cjbohac@suse.cz\u003e\nSigned-off-by: Jay Vosburgh \u003cfubar@us.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6f4d6dc167a001267eeff18bdea0ce3e9108c662", "tree": "e2730f18797c159df0f4953d4dca22cca48f58f9", "parents": [ "c6914a6f261aca0c9f715f883a353ae7ff51fe83" ], "author": { "name": "Breno Leitao", "email": "leitao@linux.vnet.ibm.com", "time": "Tue Apr 19 09:39:22 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 20 01:41:26 2011 -0700" }, "message": "ehea: Fix a DLPAR bug on ehea_rereg_mrs().\n\nWe are currently continuing if ehea_restart_qps() fails, when we\ndo a memory DLPAR (remove or add more memory to the system).\n\nThis patch just let the NAPI disabled if the ehea_restart_qps()\nfails.\n\nSigned-off-by: Breno Leitao \u003cleitao@linux.vnet.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2232d31bf18ba02f5cd632bbfc3466aeca394c75", "tree": "13a46384ab1b73d548604760e4b849c4202bcb74", "parents": [ "7caa2316bf0434f1150f58cb576542987a0466d7" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Fri Apr 15 00:41:43 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 19 15:22:52 2011 -0400" }, "message": "ath9k: fix the return value of ath_stoprecv\n\nThe patch \u0027ath9k_hw: fix stopping rx DMA during resets\u0027 added code to detect\na condition where rx DMA was stopped, but the MAC failed to enter the idle\nstate. This condition requires a hardware reset, however the return value\nof ath_stoprecv was \u0027true\u0027 in that case, which allowed it to skip the reset\nwhen issuing a fast channel change.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nReported-by: Paul Stewart \u003cpstew@google.com\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7caa2316bf0434f1150f58cb576542987a0466d7", "tree": "e1318ff53f7db1078d0dfe3b7db687143d497e5b", "parents": [ "332704a51498a7e29aa92c19dc03f11f80b71bfe" ], "author": { "name": "Daniel Halperin", "email": "dhalperi@cs.washington.edu", "time": "Wed Apr 06 12:47:25 2011 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Mon Apr 18 08:15:26 2011 -0700" }, "message": "iwlwifi: fix frame injection for HT channels\n\nFor some reason, sending QoS configuration causes transmission to stop\nafter a single frame on HT channels when not associated. Removing the\nextra QoS configuration has no effect on station mode, and fixes\ninjection mode.\n\nSigned-off-by: Daniel Halperin \u003cdhalperi@cs.washington.edu\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "0553c891fabd287726b41076cfd03fe7e5ab596f", "tree": "6b8b7074ff457e1533e8c397e09c03cd86ddc76e", "parents": [ "70dda99c41fc8a153e09bdba9adb7805ba2a4bb3" ], "author": { "name": "Krishna Kumar", "email": "krkumar2@in.ibm.com", "time": "Thu Apr 14 06:07:04 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 17 23:27:16 2011 -0700" }, "message": "ip6_pol_route panic: Do not allow VLAN on loopback\n\nSeveral tests in the ipv6 routing code check IFF_LOOPBACK, and\nallowing stacking such as VLAN\u0027ing on top of loopback results in a\nnetdevice which reports IFF_LOOPBACK but really isn\u0027t the loopback\ndevice.\n\nInstead of spamming the ipv6 routing code with even more special tests,\nsimply disallow VLAN over loopback.\n\nThe result of this patch is:\n\n# modprobe 8021q\n# vconfig add lo 43\nERROR: trying to add VLAN #43 to IF -:lo:- error: Operation not supported\n\nSigned-off-by: Krishna Kumar \u003ckrkumar2@in.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "70dda99c41fc8a153e09bdba9adb7805ba2a4bb3", "tree": "52ae78da0e081098ff77a0e66546a09927942dbe", "parents": [ "c8a75b345b38a9b63ffd077c0eb71707fa194fc6" ], "author": { "name": "Yaniv Rosner", "email": "yanivr@broadcom.com", "time": "Sun Apr 17 17:50:01 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 17 17:50:01 2011 -0700" }, "message": "bnx2x: Fix port identification problem\n\nThis patch fixes port identification on optic devices when there\u0027s no link on the port.\n\nSigned-off-by: Yaniv Rosner \u003cyanivr@broadcom.com\u003e\nSigned-off-by: Eilon Greenstein \u003ceilong@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "49b4947aae404c8c5758ffd1007d0d78c48b3643", "tree": "2841487026f8215acdef95c1aaca540917c3246e", "parents": [ "79ea6c8966b861f80e77a14b2acf581563f3c83e" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Thu Apr 14 08:05:19 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 14 13:39:45 2011 -0700" }, "message": "bna: fix memory leak during RX path cleanup\n\nThe memory leak was caused by unintentional assignment of the Rx path\ndestroy callback function pointer to NULL just after correct\ninitialization.\n\nSigned-off-by: Debashis Dutt \u003cddutt@brocade.com\u003e\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "79ea6c8966b861f80e77a14b2acf581563f3c83e", "tree": "d2a556b6e833a88519faca8e064725bdfabcbe5f", "parents": [ "dd5030404695d81792a21cba575e02b21a2f275a" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Thu Apr 14 08:05:18 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 14 13:39:44 2011 -0700" }, "message": "bna: fix for clean fw re-initialization\n\nDuring a kernel crash, bna control path state machine and firmware do not\nget a notification and hence are not cleanly shutdown. The registers\nholding driver/IOC state information are not reset back to valid\ndisabled/parking values. This causes subsequent driver initialization\nto hang during kdump kernel boot. This patch, during the initialization\nof first PCI function, resets corresponding register when unclean shutown\nis detect by reading chip registers. This will make sure that ioc/fw\ngets clean re-initialization.\n\nSigned-off-by: Debashis Dutt \u003cddutt@brocade.com\u003e\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "dd5030404695d81792a21cba575e02b21a2f275a", "tree": "3444db9d86b9a9c325066fd5fd2bc62397f1a04a", "parents": [ "38a2f37258f9e2ae3f6e4241e01088be8dfaf4e9", "332704a51498a7e29aa92c19dc03f11f80b71bfe" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 14 13:16:51 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 14 13:16:51 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "332704a51498a7e29aa92c19dc03f11f80b71bfe", "tree": "27b15e8fda9c070784d820cc98fd5985a475e88e", "parents": [ "50f6871218802be528961e24487f00c203a5c3c7" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Wed Apr 13 10:56:51 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 13 15:09:53 2011 -0400" }, "message": "iwlegacy: fix tx_power initialization\n\npriv-\u003etx_power_next is not initialized to max supported power,\nbut instead default value is used, what cause errors like\n\n[ 58.597834] iwl3945 0000:03:00.0: Requested user TXPOWER 15 above upper limit 14.\n[ 58.597839] iwl3945 0000:03:00.0: Error setting Tx power (-22).\n\nif maximum tx power read from the eeprom is smaller than default.\nIn consequence card is unable to initialize properly. Fix the problem\nand cleanup tx power initialization.\n\nReported-and-tested-by: Robin Dong \u003chao.bigrat@gmail.com\u003e\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "91a403caf0f26c71ce4407fd235b2d6fb225fba9", "tree": "9c542d7ab98275d87e32eb97056025a14b520b16", "parents": [ "7c9f6472d46d07000c197e1d24fa2a332606968e" ], "author": { "name": "Amit Kumar Salecha", "email": "amit.salecha@qlogic.com", "time": "Tue Apr 12 17:05:55 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 13 11:53:11 2011 -0700" }, "message": "qlcnic: limit skb frags for non tso packet\n\nMachines are getting deadlock in four node cluster environment.\nAll nodes are accessing (find /gfs2 -depth -print|cpio -ocv \u003e /dev/null)\n200 GB storage on a GFS2 filesystem.\nThis result in memory fragmentation and driver receives 18 frags for\n1448 byte packets.\nFor non tso packet, fw drops the tx request, if it has \u003e14 frags.\n\nFixing it by pulling extra frags.\n\nCc: stable@kernel.org\nSigned-off-by: Amit Kumar Salecha \u003camit.salecha@qlogic.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7c9f6472d46d07000c197e1d24fa2a332606968e", "tree": "a79b21d8ad19f2b664f4b66b95f6d7674655dc46", "parents": [ "9494c7c5774d64a84a269aad38c153c4dbff97e6" ], "author": { "name": "Anatolij Gustschin", "email": "agust@denx.de", "time": "Tue Apr 12 23:49:28 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 13 11:34:19 2011 -0700" }, "message": "net: can: mscan: fix build breakage in mpc5xxx_can\n\nCommit 74888760d40b3ac9054f9c5fa07b566c0676ba2d\n\"dt/net: Eliminate users of of_platform_{,un}register_driver\"\nbroke building mscan driver. Fix it.\n\nSigned-off-by: Anatolij Gustschin \u003cagust@denx.de\u003e\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nAcked-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e\nAcked-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c0212fb146bf3e77cd6b28a06b8f503e2974fdc8", "tree": "fe75b3119a86220f0ec5cc8df1a1cf364e10e681", "parents": [ "bfac3693c426d280b026f6a1b77dc2294ea43fea", "fcfa060468a4edcf776f0c1211d826d5de1668c1" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 17:10:52 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 17:10:52 2011 -0700" }, "message": "Merge branch \u0027sfc-2.6.39\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-2.6\n" }, { "commit": "fcfa060468a4edcf776f0c1211d826d5de1668c1", "tree": "3e8387932c5cc10facffa248ecfb648564a9ae5e", "parents": [ "d4fabcc8e8ecac21262b1a5b9684fe415b128bd2" ], "author": { "name": "Neil Turton", "email": "nturton@solarflare.com", "time": "Mon Apr 11 11:42:43 2011 +0100" }, "committer": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Tue Apr 12 23:52:44 2011 +0100" }, "message": "sfc: Use rmb() to ensure reads occur in order\n\nEnabling write-combining may also enable read reordering. The BIU is\nonly guaranteed to read from a 128-bit CSR or 64-bit SRAM word when\nthe host reads from its lowest address; otherwise the BIU may use the\nlatched value. Therefore we need to reinstate the read memory\nbarriers after the first read operation for each CSR or SRAM word.\n\nSigned-off-by; Ben Hutchings \u003cbhutchings@solarflare.com\u003e\n" }, { "commit": "3d894a9c1959acaa6981283619b465f75f7e535e", "tree": "37992cf1651c3c3e7c5941daa91db9e4131ec4ae", "parents": [ "efa2ad8918afc2f5e4ea533110758b26991f1937" ], "author": { "name": "Otavio Salvador", "email": "otavio@ossystems.com.br", "time": "Tue Apr 12 05:30:41 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 14:56:00 2011 -0700" }, "message": "net/natsami: store MAC into perm_addr\n\nSigned-off-by: Otavio Salvador \u003cotavio@ossystems.com.br\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "efa2ad8918afc2f5e4ea533110758b26991f1937", "tree": "e1c5072a205caafd2959dbd389a907132e84fe66", "parents": [ "0e08785845093ef4ed220463a739bc8d0db95de7" ], "author": { "name": "Otavio Salvador", "email": "otavio@ossystems.com.br", "time": "Tue Apr 12 05:30:40 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 14:56:00 2011 -0700" }, "message": "net/sis900: store MAC into perm_addr for SiS 900, 630E, 635 and 96x variants\n\nSigned-off-by: Otavio Salvador \u003cotavio@ossystems.com.br\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "50f6871218802be528961e24487f00c203a5c3c7", "tree": "5724a92fb84de3a463e7d7baa41369f21296c893", "parents": [ "5882da02e9d9089b7e8c739f3e774aaeeff8b7ba" ], "author": { "name": "Sujith Manoharan", "email": "Sujith.Manoharan@atheros.com", "time": "Mon Apr 11 22:56:55 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:41:34 2011 -0400" }, "message": "ath9k_htc: Fix ethtool reporting\n\nPass the correct module name and device interface so that\nethtool can display the proper values.\n\nThe firmware version will be fixed later on when the FW\ncan actually report a version. :)\n\nReported-by: Richard Farina \u003csidhayn@gmail.com\u003e\nSigned-off-by: Sujith Manoharan \u003cSujith.Manoharan@atheros.com\u003e\nTested-by: Richard Farina \u003csidhayn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5882da02e9d9089b7e8c739f3e774aaeeff8b7ba", "tree": "a260e6094888a14fc85d687b24606886fc158891", "parents": [ "4a39e781682828c1b81a839e7d343fd91945a8d5" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Fri Apr 08 20:13:18 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:41:33 2011 -0400" }, "message": "ath9k_hw: fix stopping rx DMA during resets\n\nDuring PHY errors, the MAC can sometimes fail to enter an idle state on older\nhardware (before AR9380) after an rx stop has been requested.\n\nThis typically shows up in the kernel log with messages like these:\n\nath: Could not stop RX, we could be confusing the DMA engine when we start RX up\n------------[ cut here ]------------\nWARNING: at drivers/net/wireless/ath/ath9k/recv.c:504 ath_stoprecv+0xcc/0xf0 [ath9k]()\nCall Trace:\n[\u003c8023f0e8\u003e] dump_stack+0x8/0x34\n[\u003c80075050\u003e] warn_slowpath_common+0x78/0xa4\n[\u003c80075094\u003e] warn_slowpath_null+0x18/0x24\n[\u003c80d66d60\u003e] ath_stoprecv+0xcc/0xf0 [ath9k]\n[\u003c80d642cc\u003e] ath_set_channel+0xbc/0x270 [ath9k]\n[\u003c80d65254\u003e] ath_radio_disable+0x4a4/0x7fc [ath9k]\n\nWhen this happens, the state that the MAC enters is easy to identify and\ndoes not result in bogus DMA traffic, however to ensure a working state\nafter a channel change, the hardware should still be reset.\n\nThis patch adds detection for this specific MAC state, after which the above\nwarnings completely disappear in my tests.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCc: stable@kernel.org\nCc: Kyungwan Nam \u003cKyungwan.Nam@Atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d4fabcc8e8ecac21262b1a5b9684fe415b128bd2", "tree": "b9c8f2532b4ff56589477b5f12f85ed4d70409e5", "parents": [ "9d1aea62e45d447e7fc05d4e7f4e90f633e3abfc" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Mon Apr 04 14:22:11 2011 +0100" }, "committer": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Tue Apr 12 16:37:54 2011 +0100" }, "message": "sfc: Do not use efx_process_channel_now() in online self-test\n\nDuring self-tests we use efx_process_channel_now() to handle\ncompletion and other events synchronously. This disables interrupts\nand NAPI processing for the channel in question, but it may still be\ninterrupted by another channel. A single socket may receive packets\nfrom multiple net devices or even multiple channels of the same net\ndevice, so this can result in deadlock on a socket lock.\n\nReceiving packets in process context will also result in incorrect\nclassification by the network cgroup classifier.\n\nTherefore, we must only use efx_process_channel_now() in the offline\nloopback tests (which never deliver packets up the stack) and not for\nthe online interrupt and event tests.\n\nFor the interrupt test, there is no reason to process events. We\nonly care that an interrupt is raised.\n\nFor the event test, we want to know whether events have been received,\nand there may be many events ahead of the one we inject. Therefore\nremove efx_channel::magic_count and instead test whether\nefx_channel::eventq_read_ptr advances. This is currently an event\nqueue index and might wrap around to exactly the same value, resulting\nin a false negative. Therefore move the masking to efx_event() and\nefx_nic_eventq_read_ack() so that it cannot wrap within the time of\nthe test.\n\nThe event test also tries to diagnose failures by checking whether an\nevent was delivered without causing an interrupt. Add and use a\nhelper function that only does this.\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\n" }, { "commit": "9d1aea62e45d447e7fc05d4e7f4e90f633e3abfc", "tree": "19869ff5f97c2b270bde599a7c0ce59bb5afa5f7", "parents": [ "4a9f65f6304a00f6473e83b19c1e83caa1e42530" ], "author": { "name": "Neil Turton", "email": "nturton@solarflare.com", "time": "Mon Apr 04 13:46:23 2011 +0100" }, "committer": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Tue Apr 12 16:20:25 2011 +0100" }, "message": "sfc: Stop the TX queues during loopback self-tests\n\nIf the TX queues are running during loopback self tests, host\ntraffic gets looped back which causes the test to fail. Avoid\nrestarting the TX queues after the port reset so that any packets\nsent by the host get held back until after the tests have completed.\n\n[bwh: Also wake all TX queues at the end of self-tests.]\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\n" }, { "commit": "c968bdf6912cad6d0fc63d7037cc1c870604a808", "tree": "a2a10926aa0ddac61b30c168d29c487845aacd36", "parents": [ "77c8e2c01542649f7a02fef8eb3b3d0e7fed6bbd" ], "author": { "name": "amit salecha", "email": "amit.salecha@qlogic.com", "time": "Mon Apr 11 02:10:22 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 13:15:57 2011 -0700" }, "message": "netxen: limit skb frags for non tso packet\n\nMachines are getting deadlock in four node cluster environment.\nAll nodes are accessing (find /gfs2 -depth -print|cpio -ocv \u003e /dev/null)\n200 GB storage on a GFS2 filesystem.\nThis result in memory fragmentation and driver receives 18 frags for\n1448 byte packets.\nFor non tso packet, fw drops the tx request, if it has \u003e14 frags.\n\nFixing it by pulling extra frags.\n\nCc: stable@kernel.org\nSigned-off-by: Amit Kumar Salecha \u003camit.salecha@qlogic.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "77c8e2c01542649f7a02fef8eb3b3d0e7fed6bbd", "tree": "2bdeb6ff656f5b0155d1fc001c8f54f47da68c0a", "parents": [ "9814290ad0314fa0ce7991eae34ac44956e40b12" ], "author": { "name": "Peter Pan(潘卫平)", "email": "panweiping3@gmail.com", "time": "Mon Apr 11 00:16:32 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 13:15:56 2011 -0700" }, "message": "bonding:fix two typos\n\nreplace relpy with reply.\nreplace premanent with permanent.\n\nSigned-off-by: Weiping Pan(潘卫平) \u003cpanweiping3@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9814290ad0314fa0ce7991eae34ac44956e40b12", "tree": "fd507ee6c38aff738ff764b942d4025d1e42ee4d", "parents": [ "26f007b85a1bb73e1974ebd371cf5cd1e80c0a00" ], "author": { "name": "Peter Pan(潘卫平)", "email": "panweiping3@gmail.com", "time": "Mon Apr 11 00:15:57 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 13:15:56 2011 -0700" }, "message": "net: fix tranmitted/tranmitting typo\n\nreplace tranmitted with transmitted.\nreplace tranmitting with transmitting.\n\nSigned-off-by: Weiping Pan(潘卫平) \u003cpanweiping3@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "26f007b85a1bb73e1974ebd371cf5cd1e80c0a00", "tree": "677b2dc6a4b5d2885aaede92368beb1132134ad4", "parents": [ "3b647568454acedb8f09f72931bfe92b73f812c7" ], "author": { "name": "Peter Pan(潘卫平)", "email": "panweiping3@gmail.com", "time": "Sun Apr 10 22:17:25 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 13:15:55 2011 -0700" }, "message": "bonding:delete unused rlb_interval_counter\n\nNow, alb_bond_info uses rx_ntt,rlb_update_delay_counter and\nrlb_update_retry_counter to decide when to call rlb_update_rx_clients().\n\nSigned-off-by: Weiping Pan(潘卫平) \u003cpanweiping3@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3b647568454acedb8f09f72931bfe92b73f812c7", "tree": "ddb1610b5157c89c75b3ee0694c685c2783a9c3c", "parents": [ "38dbaf0afb518e462de7afca552acad048237a73" ], "author": { "name": "Peter Pan(潘卫平)", "email": "panweiping3@gmail.com", "time": "Sun Apr 10 22:17:24 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 13:15:55 2011 -0700" }, "message": "bonding:delete unused alb_timer\n\nNow bonding-alb uses delayed_work instead of timer_list.\n\nSigned-off-by: Weiping Pan(潘卫平) \u003cpanweiping3@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "38dbaf0afb518e462de7afca552acad048237a73", "tree": "abebb39d02e08d539930332835ff8192bfa8134c", "parents": [ "a08070acd43a76069ab20000cd02474369506add" ], "author": { "name": "Peter Pan(潘卫平)", "email": "panweiping3@gmail.com", "time": "Fri Apr 08 03:40:19 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 13:15:54 2011 -0700" }, "message": "bonding:set save_load to 0 when initializing\n\nIt is unnecessary to set save_load to 1 here,\nas the tx_hashtbl is just kzalloced.\n\nSigned-off-by: Weiping Pan(潘卫平) \u003cpanweiping3@gmail.com\u003e\nSigned-off-by: Jay Vosburgh \u003cfubar@us.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a08070acd43a76069ab20000cd02474369506add", "tree": "9f09417e2ea3c623250b9598b7ff8752654acbd4", "parents": [ "f66ffe285939559d2a6f630a36f676d7c056b99d" ], "author": { "name": "Giuseppe CAVALLARO", "email": "peppe.cavallaro@st.com", "time": "Sun Apr 10 23:16:46 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 12:55:48 2011 -0700" }, "message": "stmmac: fix Transmit Underflow error\n\nOn some old MAC chips without COE sometime the\nTransmit Underflow error is issued.\n\nThe driver aborted all the transmission process\nand initialized it from scratch.\nThis breaks the network activity as raised by Nachiketa\non a SPEAr board.\n\nThe patch is to fix this rare underflow event.\nThe driver will only clear the interrupt and the Tx\nDMA will go out the Suspend state as soon as the\ndescriptor is fetched again.\nThe driver will continue to bump-up the DMA FIFO threshold\nthat, indeed, helped somebody to prevent this kind of error\nin the past as well.\n\nReported-by: Nachiketa Prachanda \u003cnprachanda@ncomputing.com\u003e\nSigned-off-by: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f66ffe285939559d2a6f630a36f676d7c056b99d", "tree": "3b6ee5cdd3b679b4a1d01d3b30d3cf208554183e", "parents": [ "bded18c2dd09eee870f4446652dbce493a6dece1" ], "author": { "name": "Giuseppe CAVALLARO", "email": "peppe.cavallaro@st.com", "time": "Sun Apr 10 23:16:45 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 12:55:47 2011 -0700" }, "message": "stmmac: fix open funct when exit on error\n\nThis patch reviews the open function and fixes some\nerrors when exit with an error state.\nIt also moves the request_irq after core is initialized\nwhen interrupts are properly masked.\n\nSigned-off-by: Shiraz Hashim \u003cshiraz.hashim@st.com\u003e\nHacked-by: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "bded18c2dd09eee870f4446652dbce493a6dece1", "tree": "e5fa7154479979972bb540cc622502172850eb13", "parents": [ "0e10b33a05fd57a8aaf9672e05e83937fb243a08" ], "author": { "name": "Giuseppe CAVALLARO", "email": "peppe.cavallaro@st.com", "time": "Sun Apr 10 23:16:44 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 12:55:47 2011 -0700" }, "message": "stmmac: fixed dma lib build when turn-on the debug option\n\nThis patch fixes a compilation error when build the\ndwmac_lib with the DEBUG option enabled.\n\nSigned-off-by: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "0e10b33a05fd57a8aaf9672e05e83937fb243a08", "tree": "a8d8551e84a72b2f696b6d1f6112babb27d441ee", "parents": [ "b42282e5a05018ecdc0d63a4ad530b0999785912", "4a39e781682828c1b81a839e7d343fd91945a8d5" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 12:53:51 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 12:53:51 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "4a39e781682828c1b81a839e7d343fd91945a8d5", "tree": "e4549900aad16e3400df59b867e96489c16ab90c", "parents": [ "a6756da9eace8b4af73e9dea43f1fc2889224c94" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 11 13:02:06 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 11 13:56:07 2011 -0400" }, "message": "iwlegacy: make iwl3945 and iwl4965 select IWLWIFI_LEGACY\n\nOtherwise, IWLWIFI_LEGACY has to be selected independently before the\ndrivers are made available.\n\nReported-by: Dave Airlie \u003cairlied@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nCc: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nCc: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "c44eaf41a5a423993932c9a9ad279ee132779b48", "tree": "3554fc0bfdcd97936417d6d001d00710d11e67e5", "parents": [ "4263a2f1dad8c8e7ce2352a0cbc882c2b0c044a9", "88edaa415966af965bb7eb7056d8b58145462c8e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 11 07:27:24 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 11 07:27:24 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)\n net: Add support for SMSC LAN9530, LAN9730 and LAN89530\n mlx4_en: Restoring RX buffer pointer in case of failure\n mlx4: Sensing link type at device initialization\n ipv4: Fix \"Set rt-\u003ert_iif more sanely on output routes.\"\n MAINTAINERS: add entry for Xen network backend\n be2net: Fix suspend/resume operation\n be2net: Rename some struct members for clarity\n pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev\n dsa/mv88e6131: add support for mv88e6085 switch\n ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2)\n be2net: Fix a potential crash during shutdown.\n bna: Fix for handling firmware heartbeat failure\n can: mcp251x: Allow pass IRQ flags through platform data.\n smsc911x: fix mac_lock acquision before calling smsc911x_mac_read\n iwlwifi: accept EEPROM version 0x423 for iwl6000\n rt2x00: fix cancelling uninitialized work\n rtlwifi: Fix some warnings/bugs\n p54usb: IDs for two new devices\n wl12xx: fix potential buffer overflow in testmode nvs push\n zd1211rw: reset rx idle timer from tasklet\n ...\n" }, { "commit": "88edaa415966af965bb7eb7056d8b58145462c8e", "tree": "6a681868803740cd6317080cf9507eaf4dfb5d49", "parents": [ "60b1809f7e2ea2620aa548e1c866066756bdd1d2" ], "author": { "name": "Steve Glendinning", "email": "steve.glendinning@smsc.com", "time": "Sun Apr 10 18:59:27 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 10 18:59:27 2011 -0700" }, "message": "net: Add support for SMSC LAN9530, LAN9730 and LAN89530\n\nThis patch adds support for SMSC\u0027s LAN9530, LAN9730 and LAN89530 USB\nethernet controllers to the existing smsc95xx driver by adding\ntheir new USB VID/PID pairs.\n\nSigned-off-by: Steve Glendinning \u003csteve.glendinning@smsc.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a6756da9eace8b4af73e9dea43f1fc2889224c94", "tree": "7f1ac79ad2de9f422119f45d723af9bf3eb7bd66", "parents": [ "96f372c95d32f76fa2b0e035e0a6269234bfda09" ], "author": { "name": "Jason Conti", "email": "jason.conti@gmail.com", "time": "Thu Apr 07 21:09:57 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Apr 08 13:06:30 2011 -0400" }, "message": "p54: Initialize extra_len in p54_tx_80211\n\nThis patch fixes a very serious off-by-one bug in\nthe driver, which could leave the device in an\nunresponsive state.\n\nThe problem was that the extra_len variable [used to\nreserve extra scratch buffer space for the firmware]\nwas left uninitialized. Because p54_assign_address\nlater needs the value to reserve additional space,\nthe resulting frame could be to big for the small\ndevice\u0027s memory window and everything would\nimmediately come to a grinding halt.\n\nReference: https://bugs.launchpad.net/bugs/722185\n\nCc: \u003cstable@kernel.org\u003e\nAcked-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: Jason Conti \u003cjason.conti@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "96f372c95d32f76fa2b0e035e0a6269234bfda09", "tree": "6fff40a25844d7ec927ce1f1d361f4c57b9096ff", "parents": [ "bd39a274fb7b43374c797bafdb7f506598f36f77" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Apr 07 19:07:17 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Apr 08 13:06:30 2011 -0400" }, "message": "ath9k: fix missing ath9k_ps_wakeup/ath9k_ps_restore calls\n\nThese missing chip wakeups mainly cause crashes on AR5416 cards in MIPS\nboards, but have also been reported to cause radio stability issues on\nAR9285.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "60b1809f7e2ea2620aa548e1c866066756bdd1d2", "tree": "79ab74bbcd1bdb2232bb750a3236baee298d41bb", "parents": [ "ab6dc30da55d262c54ae12e47e4a2e4372e39fbf" ], "author": { "name": "Yevgeny Petrilin", "email": "yevgenyp@mellanox.co.il", "time": "Wed Apr 06 23:25:45 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 07 20:36:13 2011 -0700" }, "message": "mlx4_en: Restoring RX buffer pointer in case of failure\n\nIf not done, second attempt to open the RX ring would cause memory corruption.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ab6dc30da55d262c54ae12e47e4a2e4372e39fbf", "tree": "fb77f6babbe4014502160bd8ddae2993ca6a1180", "parents": [ "1b86a58f9d7ce4fe2377687f378fbfb53bdc9b6c" ], "author": { "name": "Yevgeny Petrilin", "email": "yevgenyp@mellanox.co.il", "time": "Wed Apr 06 23:24:42 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 07 20:36:12 2011 -0700" }, "message": "mlx4: Sensing link type at device initialization\n\nWhen bringing the port up, performing a SENSE_PORT command\nTo try and check to which physical link type (IB or Ethernet) the physical\nport is connected.\nIn case there is no valid link partner, the port will come up as its\nsupported default.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "bd39a274fb7b43374c797bafdb7f506598f36f77", "tree": "d2c8bfc8312621d07bb0b4205468d125a296689c", "parents": [ "bf3ca7f752d8f5009c9a83db56035566f3e313de" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Wed Apr 06 20:40:31 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 14:40:14 2011 -0400" }, "message": "ath: add missing regdomain pair 0x5c mapping\n\nJoe Culler reported a problem with his AR9170 device:\n\n\u003e ath: EEPROM regdomain: 0x5c\n\u003e ath: EEPROM indicates we should expect a direct regpair map\n\u003e ath: invalid regulatory domain/country code 0x5c\n\u003e ath: Invalid EEPROM contents\n\nIt turned out that the regdomain \u0027APL7_FCCA\u0027 was not mapped yet.\nAccording to Luis R. Rodriguez [Atheros\u0027 engineer] APL7 maps to\nFCC_CTL and FCCA maps to FCC_CTL as well, so the attached patch\nshould be correct.\n\nCc: \u003cstable@kernel.org\u003e\nReported-by: Joe Culler \u003cjoe.culler@gmail.com\u003e\nAcked-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bf3ca7f752d8f5009c9a83db56035566f3e313de", "tree": "21b38b1a8705c7006dbc754d662e9c282eb386f2", "parents": [ "2845fd858c55c8a05674a071384a12a19cc17dbf" ], "author": { "name": "Brian Cavagnolo", "email": "brian@cozybit.com", "time": "Wed Apr 06 14:18:46 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 14:40:13 2011 -0400" }, "message": "mwl8k: do not free unrequested irq\n\nWhen the mwl8k driver attempts and fails to switch from sta to ap\nfirmware (or vice-versa) in the mwl8k_add_interface routine, the\nmwl8k_stop routine will be called. This routine must not attempt\nto free the irq if it was not requested.\n\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: Nishant Sarmukadam \u003cnishants@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2845fd858c55c8a05674a071384a12a19cc17dbf", "tree": "95780844db0043a347dbe346a7a08452385ea729", "parents": [ "3d7dc7e8c1566acb0fc55df228b2ed91f5638e9d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Apr 05 08:55:05 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 14:40:13 2011 -0400" }, "message": "iwlagn: override 5300 EEPROM # of chains\n\nAt least EEPROM version 0x11A has the wrong\nnumber of chains programmed into it for some\nreason, so we need to override in the driver.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "42933bac11e811f02200c944d8562a15f8ec4ff0", "tree": "fcdd9afe56eb0e746565ddd1f92f22d36678b843", "parents": [ "2b9accbee563f535046ff2cd382d0acaa92e130c", "25985edcedea6396277003854657b5f3cb31a628" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Apr 07 11:14:49 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Apr 07 11:14:49 2011 -0700" }, "message": "Merge branch \u0027for-linus2\u0027 of git://git.profusion.mobi/users/lucas/linux-2.6\n\n* \u0027for-linus2\u0027 of git://git.profusion.mobi/users/lucas/linux-2.6:\n Fix common misspellings\n" }, { "commit": "1f5db833758a9650ad002058e40760aaa11d732e", "tree": "c5637207db93cd19d44da0cbddb4acd18ea2eb9e", "parents": [ "ecd6210765f93bd2c578d370d45bb49c710f3e89" ], "author": { "name": "Padmanabh Ratnakar", "email": "padmanabh.ratnakar@emulex.com", "time": "Sun Apr 03 01:54:39 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 14:40:15 2011 -0700" }, "message": "be2net: Fix suspend/resume operation\n\neq_next_idx is not getting reset to zero during suspend.\nThis causes resume to fail. Added the fix.\n\nSigned-off-by: Sarveswara Rao Mygapula \u003csarveswararao.mygapula@emulex.com\u003e\nSigned-off-by: Padmanabh Ratnakar \u003cpadmanabh.ratnakar@emulex.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ecd6210765f93bd2c578d370d45bb49c710f3e89", "tree": "9f343fc7c68ab0603384c59ba77d7d717b0e6526", "parents": [ "ae07b0b221b6ab2edf9e3abd518aec6cd3f1ba66" ], "author": { "name": "Padmanabh Ratnakar", "email": "padmanabh.ratnakar@emulex.com", "time": "Sun Apr 03 01:54:11 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 14:40:15 2011 -0700" }, "message": "be2net: Rename some struct members for clarity\n\nRenamed msix_vec_idx to eq_idx in be_eq_obj struct.\nRenamed msix_vec_next_idx to eq_next_idx in be_adapter structure.\nThese members are used in INTX mode also.\n\nSigned-off-by: Sarveswara Rao Mygapula \u003csarveswararao.mygapula@emulex.com\u003e\nSigned-off-by: Padmanabh Ratnakar \u003cpadmanabh.ratnakar@emulex.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ae07b0b221b6ab2edf9e3abd518aec6cd3f1ba66", "tree": "02eeecf84b1499ddd5eb8124f65e003ed7074a41", "parents": [ "a25a32ab71f822efb3e6025c365caa678aa6ff3b" ], "author": { "name": "Ulrich Weber", "email": "uweber@astaro.com", "time": "Wed Apr 06 14:04:49 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 14:04:49 2011 -0700" }, "message": "pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev\n\notherwise we loop forever if a PPPoE socket was set\nto PPPOX_ZOMBIE state by a PADT message when the\nethernet device is going down afterwards.\n\nSigned-off-by: Ulrich Weber \u003cuweber@astaro.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a25a32ab71f822efb3e6025c365caa678aa6ff3b", "tree": "fcbc495baddf6d1837034cb83ee837887ea648f6", "parents": [ "ec80bfcb68a0c46443991991d459a0cde773cdea", "3d7dc7e8c1566acb0fc55df228b2ed91f5638e9d" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 13:34:15 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 13:34:15 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "2d5d4154650459b61a8e7097d186a89d89dab8ed", "tree": "1a68a7ce66ee6fae5731e53287f7e3c54209c394", "parents": [ "1e58148670908e9fd180761c0eed3839b6778f01" ], "author": { "name": "Ajit Khaparde", "email": "ajit.khaparde@emulex.com", "time": "Wed Apr 06 05:53:13 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 12:40:18 2011 -0700" }, "message": "be2net: Fix a potential crash during shutdown.\n\nadapter could remain uninitialized if probe fails for some reason.\nA null pointer access could cause a crash if be_shutdown\nis called after that.\n\nSigned-off-by: Ajit Khaparde \u003cajit.khaparde@emulex.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1e58148670908e9fd180761c0eed3839b6778f01", "tree": "bfb391c5fc0a9c5db96df53a2742cec48d140346", "parents": [ "34206f267120c839a479d0237db907fa062e7b0f" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Mon Apr 04 08:29:59 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 12:39:07 2011 -0700" }, "message": "bna: Fix for handling firmware heartbeat failure\n\nThis patch contains a fix for gracefully handling firmware heartbeat\nfailure instead of forcing panic.\n\nSigned-off-by: Debashis Dutt \u003cddutt@brocade.com\u003e\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "34206f267120c839a479d0237db907fa062e7b0f", "tree": "9c0ba35cefe44b0913c6cbbc7165869d839abee7", "parents": [ "35a67edf3570e9b44c34965dd52a6b7f845fb40f" ], "author": { "name": "Enric Balletbo i Serra", "email": "eballetbo@iseebcn.com", "time": "Tue Apr 05 07:08:41 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 12:24:26 2011 -0700" }, "message": "can: mcp251x: Allow pass IRQ flags through platform data.\n\nWhen an interrupt occurs, the INT pin is driven low by the\nMCP251x controller (falling edge) but in some cases the INT\npin can be connected to the MPU through a transistor or level\ntranslator which inverts this signal. In this case interrupt\nshould be configured in rising edge.\n\nThis patch adds support to pass the IRQ flags via\nmcp251x_platform_data.\n\nSigned-off-by: Enric Balletbo i Serra \u003ceballetbo@iseebcn.com\u003e\nAcked-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e\nAcked-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "35a67edf3570e9b44c34965dd52a6b7f845fb40f", "tree": "ef1be41308633817ed93683ed171458c626c7eae", "parents": [ "9d9305949778c41b92d4394a2f2a6bcdb1c41a9c" ], "author": { "name": "Enric Balletbo i Serra", "email": "eballetbo@iseebcn.com", "time": "Tue Apr 05 06:52:49 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 12:23:12 2011 -0700" }, "message": "smsc911x: fix mac_lock acquision before calling smsc911x_mac_read\n\nWhen SMSC911X_SAVE_MAC_ADDRESS flag is enabled the driver calls\nsmsc911x_mac_read and smsc911x_mac_read function without acquiring mac_lock\nspinlock\n\nThis patch fixes following warning\n\nsmsc911x: Driver version 2008-10-21.\n------------[ cut here ]------------\nWARNING: at drivers/net/smsc911x.c:261 smsc911x_mac_read+0x24/0x220()\nModules linked in:\n[\u003cc0060858\u003e] (unwind_backtrace+0x0/0xe0) from [\u003cc009322c\u003e] (warn_slowpath_common+0x4c/0x64)\n[\u003cc009322c\u003e] (warn_slowpath_common+0x4c/0x64) from [\u003cc009325c\u003e] (warn_slowpath_null+0x18/0x1c)\n[\u003cc009325c\u003e] (warn_slowpath_null+0x18/0x1c) from [\u003cc0324bec\u003e] (smsc911x_mac_read+0x24/0x220)\n[\u003cc0324bec\u003e] (smsc911x_mac_read+0x24/0x220) from [\u003cc0434788\u003e] (smsc911x_read_mac_address+0x18/0x6c)\n[\u003cc0434788\u003e] (smsc911x_read_mac_address+0x18/0x6c) from [\u003cc0434c74\u003e] (smsc911x_drv_probe+0x498/0x1788)\n[\u003cc0434c74\u003e] (smsc911x_drv_probe+0x498/0x1788) from [\u003cc02d3e54\u003e] (platform_drv_probe+0x14/0x18)\n[\u003cc02d3e54\u003e] (platform_drv_probe+0x14/0x18) from [\u003cc02d2d60\u003e] (driver_probe_device+0xc8/0x184)\n[\u003cc02d2d60\u003e] (driver_probe_device+0xc8/0x184) from [\u003cc02d2e84\u003e] (__driver_attach+0x68/0x8c)\n[\u003cc02d2e84\u003e] (__driver_attach+0x68/0x8c) from [\u003cc02d1fc8\u003e] (bus_for_each_dev+0x48/0x74)\n[\u003cc02d1fc8\u003e] (bus_for_each_dev+0x48/0x74) from [\u003cc02d2660\u003e] (bus_add_driver+0x9c/0x228)\n[\u003cc02d2660\u003e] (bus_add_driver+0x9c/0x228) from [\u003cc02d3598\u003e] (driver_register+0xa0/0x124)\n[\u003cc02d3598\u003e] (driver_register+0xa0/0x124) from [\u003cc0050668\u003e] (do_one_initcall+0x94/0x168)\n[\u003cc0050668\u003e] (do_one_initcall+0x94/0x168) from [\u003cc0008984\u003e] (kernel_init+0xa0/0x154)\n[\u003cc0008984\u003e] (kernel_init+0xa0/0x154) from [\u003cc005afac\u003e] (kernel_thread_exit+0x0/0x8)\n---[ end trace 2c931a35b7885770 ]---\n\nSigned-off-by: Enric Balletbo i Serra \u003ceballetbo@iseebcn.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3d7dc7e8c1566acb0fc55df228b2ed91f5638e9d", "tree": "be697c2f3904cf24b41274d74831dbfc74792c5d", "parents": [ "37f4ee0b6b39640828dac5937a482c20e8ac794f" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 13:18:44 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:13 2011 -0400" }, "message": "iwlwifi: accept EEPROM version 0x423 for iwl6000\n\nA number of these devices have appeared \"in the wild\", and apparently\nthe Windows driver is perfectly happy to support this EEPROM version.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nCc: stable@kernel.org\nAcked-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "37f4ee0b6b39640828dac5937a482c20e8ac794f", "tree": "089b0b57861a5442a851dcc2bb21bb26ecdd019b", "parents": [ "2e3e66e3bbcd5f999dc66d843a3efc2314e40e7b" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Mon Apr 04 13:50:32 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:13 2011 -0400" }, "message": "rt2x00: fix cancelling uninitialized work\n\n{rx,tx}done_work\u0027s are only initialized for usb devices.\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nCc: stable@kernel.org\nAcked-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2e3e66e3bbcd5f999dc66d843a3efc2314e40e7b", "tree": "6e8ce01c65a8b1d4918ee00a5e449888c5577aa3", "parents": [ "220107610c7c2c9703e09eb363e8ab31025b9315" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Sat Apr 02 18:10:22 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:13 2011 -0400" }, "message": "rtlwifi: Fix some warnings/bugs\n\nSome compiler/architecture combinations generate some warnings that are\nnot seen on my main system. Two of the \"warnings\" about unitialized variables\nare really bugs.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "220107610c7c2c9703e09eb363e8ab31025b9315", "tree": "6830678b8e98256dc2781228dd0f3d48878101bd", "parents": [ "09b661b33268698d3b453dceb78cda129ad899b4" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Sat Apr 02 11:31:29 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:12 2011 -0400" }, "message": "p54usb: IDs for two new devices\n\nCc: \u003cstable@kernel.org\u003e\nReported-by: Mark Davis [via p54/devices wiki]\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "09b661b33268698d3b453dceb78cda129ad899b4", "tree": "e5e1760d61f665bfb3216ef6de7c3a9c6b26d80c", "parents": [ "023535732f4db01af4921f20f058bc4561d9add7" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Fri Apr 01 19:42:02 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:12 2011 -0400" }, "message": "wl12xx: fix potential buffer overflow in testmode nvs push\n\nWe were allocating the size of the NVS file struct and not checking\nwhether the length of the buffer passed was correct before copying it\ninto the allocated memory. This is a security hole because buffer\noverflows can occur if the userspace passes a bigger file than what is\nexpected.\n\nWith this patch, we check if the size of the data passed from\nuserspace matches the size required.\n\nThis bug was introduced in 2.6.36.\n\nCc: stable@kernel.org\nReported-by: Ido Yariv \u003cido@wizery.com\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "023535732f4db01af4921f20f058bc4561d9add7", "tree": "fc4cf7aa28a7ba81a115f41052f71e08fee7b5cd", "parents": [ "2fc713b20469b2779fa89f582d2a9696b10031e7" ], "author": { "name": "Jussi Kivilinna", "email": "jussi.kivilinna@mbnet.fi", "time": "Fri Apr 01 19:34:16 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:12 2011 -0400" }, "message": "zd1211rw: reset rx idle timer from tasklet\n\n2.6.38 added WARN_ON(in_irq) in del_timer_sync that triggers on zd1211rw when\nreseting rx idle timer in urb completion handler.\n\nMove timer reseting to tasklet.\n\nSigned-off-by: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2fc713b20469b2779fa89f582d2a9696b10031e7", "tree": "d82d1d8ae688255efc96bc9f60295cccbdba0987", "parents": [ "fcf8bd3ba5362682f945a3f838070ac5e10ff871" ], "author": { "name": "Jussi Kivilinna", "email": "jussi.kivilinna@mbnet.fi", "time": "Fri Apr 01 19:34:08 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:12 2011 -0400" }, "message": "zd1211rw: remove URB_SHORT_NOT_OK flag in zd_usb_iowrite16v_async()\n\nPatch removes the bogus flag introduced by upstream commit\neefdbec1ea8b7093d2c09d1825f68438701723cf. Old code had buffer length check\nthat new code tried to handle with URB_SHORT_NOT_OK flag. With USB debugging\nenabled bogus flag caused usb_submit_urb fail.\n\nRemove URB_SHORT_NOT_OK flag and add buffer length check to urb completion\nhandler.\n\nBugzilla: https://bugzilla.kernel.org/show_bug.cgi?id\u003d32092\nReported-by: Jonathan Callen \u003cabcd@gentoo.org\u003e\nSigned-off-by: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8f06ca2c83689f4d352a34ef1c484f40c25b41ed", "tree": "cc0a042236819ca57a297494efcfbc365e709f11", "parents": [ "5245e3a9f77a8dd4ea92d7bdab2e96629f1feda4" ], "author": { "name": "Senthil Balasubramanian", "email": "senthilkumar@atheros.com", "time": "Fri Apr 01 17:16:33 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:11 2011 -0400" }, "message": "ath9k: Fix phy info print message with AR9485 chipset.\n\nThe phy information print during driver init time doesn\u0027t show\nthe numeric part of the chip name properly for AR9485. This patch\naddresses this issue by adding the string to the respective array.\n\nSigned-off-by: Senthil Balasubramanian \u003csenthilkumar@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5245e3a9f77a8dd4ea92d7bdab2e96629f1feda4", "tree": "cb4f6d0925f7803ce27538c7db34b12a924cba17", "parents": [ "c85ce65ecac078ab1a1835c87c4a6319cf74660a" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed Mar 30 21:31:39 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:11 2011 -0400" }, "message": "wl12xx: fix module author\u0027s email address in the spi and sdio modules\n\nThe MODULE_AUTHOR() macro in the main module (wl12xx) has been updated\nto reflect one of the author\u0027s new email address, but the wl12xx_spi\nand wl12xx_sdio modules haven\u0027t been updated. This patches updates\nthem.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c85ce65ecac078ab1a1835c87c4a6319cf74660a", "tree": "25a5e2468e4c8622c7c11e4163078a0b752ddb14", "parents": [ "a14b289d4614bb3b25d0455d68f72f3c7b4cc8e8" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:02:46 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 15:22:11 2011 -0400" }, "message": "b43: allocate receive buffers big enough for max frame len + offset\n\nOtherwise, skb_put inside of dma_rx can fail...\n\n\thttps://bugzilla.kernel.org/show_bug.cgi?id\u003d32042\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nAcked-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: stable@kernel.org\n" }, { "commit": "a14b289d4614bb3b25d0455d68f72f3c7b4cc8e8", "tree": "e7feb055039bf9040dff0fd662e4685d8a302def", "parents": [ "2fceec13375e5d98ef033c6b0ee03943fc460950" ], "author": { "name": "Mariusz Kozlowski", "email": "mk@lab.zgora.pl", "time": "Sun Apr 03 22:04:01 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 03 22:04:01 2011 -0700" }, "message": "mlx4: fix kfree on error path in new_steering_entry()\n\nOn error path kfree() should get pointer to memory allocated by\nkmalloc() not the address of variable holding it (which is on stack).\n\nSigned-off-by: Mariusz Kozlowski \u003cmk@lab.zgora.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c261344d3ce3edac781f9d3c7eabe2e96d8e8fe8", "tree": "a0f71fa65dc9b6536a5e03e7621889d6ecf48f79", "parents": [ "1591cb60838603c8cc2c540192c8244962436539" ], "author": { "name": "Arnd Bergmann", "email": "arnd.bergmann@linaro.org", "time": "Fri Apr 01 20:12:02 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 01 20:12:02 2011 -0700" }, "message": "usbnet: use eth%d name for known ethernet devices\n\nThe documentation for the USB ethernet devices suggests that\nonly some devices are supposed to use usb0 as the network interface\nname instead of eth0. The logic used there, and documented in\nKconfig for CDC is that eth0 will be used when the mac address\nis a globally assigned one, but usb0 is used for the locally\nmanaged range that is typically used on point-to-point links.\n\nUnfortunately, this has caused a lot of pain on the smsc95xx\ndevice that is used on the popular pandaboard without an\nEEPROM to store the MAC address, which causes the driver to\ncall random_ether_address().\n\nObviously, there should be a proper MAC addressed assigned to\nthe device, and discussions are ongoing about how to solve\nthis, but this patch at least makes sure that the default\ninterface naming gets a little saner and matches what the\nuser can expect based on the documentation, including for\nnew devices.\n\nThe approach taken here is to flag whether a device might be a\npoint-to-point link with the new FLAG_POINTTOPOINT setting in\nthe usbnet driver_info. A driver can set both FLAG_POINTTOPOINT\nand FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one\nof the two. The usbnet framework only looks at the MAC address\nfor device naming if both flags are set, otherwise it trusts the\nflag.\n\nSigned-off-by: Arnd Bergmann \u003carnd.bergmann@linaro.org\u003e\nTested-by: Andy Green \u003candy.green@linaro.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1591cb60838603c8cc2c540192c8244962436539", "tree": "06cad9bfc67a2027adbc875c47f0225e88dc1311", "parents": [ "5e58e5283a0a0a99ee970e7e5c80c6541693376e" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Fri Apr 01 05:27:51 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 01 20:10:08 2011 -0700" }, "message": "starfire: clean up dma_addr_t size test\n\nNow we have CONFIG_ARCH_DMA_ADDR_T_64BIT. We can fix the hacky\ndma_addr_t size test cleanly.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5e58e5283a0a0a99ee970e7e5c80c6541693376e", "tree": "40409bad22ddc6c37b23ae8e518bbd6b2f39007c", "parents": [ "c100c8f4c3c6f2a407bdbaaad2c4f1062e6a473a", "ffd8c746fbef50cf12df239f9d23c2afe1a2c3cb" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 01 17:15:25 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 01 17:15:25 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n" }, { "commit": "25985edcedea6396277003854657b5f3cb31a628", "tree": "f026e810210a2ee7290caeb737c23cb6472b7c38", "parents": [ "6aba74f2791287ec407e0f92487a725a25908067" ], "author": { "name": "Lucas De Marchi", "email": "lucas.demarchi@profusion.mobi", "time": "Wed Mar 30 22:57:33 2011 -0300" }, "committer": { "name": "Lucas De Marchi", "email": "lucas.demarchi@profusion.mobi", "time": "Thu Mar 31 11:26:23 2011 -0300" }, "message": "Fix common misspellings\n\nFixes generated by \u0027codespell\u0027 and manually reviewed.\n\nSigned-off-by: Lucas De Marchi \u003clucas.demarchi@profusion.mobi\u003e\n" }, { "commit": "c37947459172a02691ccd48cb967e8b605d38c56", "tree": "b3f52f4e13d4fe95ffe4024cb09571f0c0791110", "parents": [ "53020092bd89b0d4ccc5368a3956f43cb43e5665" ], "author": { "name": "Yevgeny Petrilin", "email": "yevgenyp@mellanox.co.il", "time": "Wed Mar 30 23:30:17 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 31 02:52:18 2011 -0700" }, "message": "mlx4: Fixing bad size of event queue buffer\n\nWe should reduce the number of reserved completion queues from the total\nnumber of entries. Since the queue size is power of two, not reducing the\nreserved entries, caused a double queue size, which may lead to allocation\nfailures in some cases.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "53020092bd89b0d4ccc5368a3956f43cb43e5665", "tree": "e77703aed0ac7d44fa82736c935039638ea6c280", "parents": [ "5e8996e72899847269ca36061ea33ea24bf6cb90" ], "author": { "name": "Yevgeny Petrilin", "email": "yevgenyp@mellanox.co.il", "time": "Wed Mar 30 23:28:52 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 31 02:52:17 2011 -0700" }, "message": "mlx4: Fixing use after free\n\nIn case of allocation failure, tried to use the promiscuous QP\nentry that was previously freed.\nNow freeing this entry only in case we will not put it back to the list\nof promiscuous entries.\n\nReported-by: Dan Carpenter \u003cerror27@gmail.com\u003e\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5e8996e72899847269ca36061ea33ea24bf6cb90", "tree": "60cf9ddfd3a3157c134799fe93648f112e13b7a5", "parents": [ "a84b50ceb7d640437d0dc28a2bef0d0de054de89" ], "author": { "name": "Peter Pan(潘卫平)", "email": "panweiping3@gmail.com", "time": "Wed Mar 30 20:46:19 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 31 01:54:22 2011 -0700" }, "message": "bonding:typo in comment\n\nuse accumulates instead of acumulates.\n\nSigned-off-by: Pan Weiping \u003cpanweiping3@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ad19031b5f6ede5b2df057e3e1b4f82a2ef7f75f", "tree": "1ec06208e25e6d39c0857d55ef4d1657dfba411d", "parents": [ "79b569f0ec53a14c4d71e79d93a8676d9a0fda6d" ], "author": { "name": "Jesper Juhl", "email": "jj@chaosbits.net", "time": "Sun Mar 27 09:16:12 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 02:42:25 2011 -0700" }, "message": "Atheros, atl2: Fix mem leaks in error paths of atl2_set_eeprom\n\nWe leak in some error paths of drivers/net/atlx/atl2.c:atl2_set_eeprom().\nThe memory allocated to \u0027eeprom_buff\u0027 is not freed when we return -EIO.\nThis patch fixes that up and also removes a pointless explicit cast.\n\nSigned-off-by: Jesper Juhl \u003cjj@chaosbits.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7a635ea989991d7f12d57a12f2ba7cb6d211e083", "tree": "63ae2f1dc375fb239237b90f23af93b8a8245132", "parents": [ "d005a09edf8b12dd1bec651b2cf94caa0e7bb1be" ], "author": { "name": "Andrzej Zaborowski", "email": "andrew.zaborowski@intel.com", "time": "Mon Mar 28 12:56:33 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 02:35:08 2011 -0700" }, "message": "net/usb: Ethernet quirks for the LG-VL600 4G modem\n\nThis adds a driver for the CDC Ethernet part of this modem. The\ndevice\u0027s ID is blacklisted in cdc_ether.c and is white-listed in\nthis new driver because of the quirks needed to make it useful.\nThe modem\u0027s firmware exposes a CDC ACM port for modem control and a\nCDC Ethernet port for network data. The descriptors look fine but\nboth ports actually are some sort of multiplexers requiring non-\nstandard headers added/removed from every packet or they get\nignored. All information is based on a usb traffic log from a\nWindows machine.\n\nOn the Verizon 4G network I\u0027ve seen speeds up to 1.1MB/s so far with\nthis driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps.\nUserspace scripts are required to talk to the CDC ACM port.\n\nSigned-off-by: Andrzej Zaborowski \u003cbalrogg@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d005a09edf8b12dd1bec651b2cf94caa0e7bb1be", "tree": "7be85d432af96505426104e2a4e47d85ceebe73b", "parents": [ "ff9a57a62afbbe2d0f3a09af321f1fd7645f38a5" ], "author": { "name": "Marc Kleine-Budde", "email": "mkl@pengutronix.de", "time": "Mon Mar 28 14:54:08 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 02:31:36 2011 -0700" }, "message": "phylib: phy_attach_direct: phy_init_hw can fail, add cleanup\n\nThe function phy_attach_direct attaches the phy and calls phy_init_hw.\nphy_init_hw can fail, but the phy is still marked as attached. Successive\ncalls to phy_attach_direct will fail because the phy is busy.\n\n[ 1.020000] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr\u003d1:00, irq\u003d-1)\n[ 1.030000] eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr\u003d1:01, irq\u003d-1)\n[ 2.050000] Sending DHCP requests .\n[ 3.020000] PHY: 1:00 - Link is Up - 100/Full\n[ 5.110000] ..... timed out!\n[ 87.660000] IP-Config: Reopening network devices...\n[ 88.190000] FEC: MDIO read timeout\n[ 88.190000] eth0: could not attach to PHY\n[ 88.190000] IP-Config: Failed to open eth0\n[ 88.210000] FEC: MDIO read timeout\n[ 88.210000] eth1: could not attach to PHY\n[ 88.210000] IP-Config: Failed to open eth1\n[ 88.220000] IP-Config: No network devices available.\n[ 88.220000] Freeing init memory: 6968K\n\n[...]\n\nstarting network interfaces...\nip: RTNETLINK answers: File exists\n[ 94.000000] net eth0: PHY already attached\n[ 94.010000] eth0: could not attach to PHY\nip: SIOCSIFFLAGS: Device or resource busy\n\nThis patch adds phy_detach to clean up if phy_init_hw fails.\n\nSigned-off-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "fd1d9188f2cb81fe63c789d9f5463dca402ade12", "tree": "9f09b2f889c91b448ae9cfe9622450930f7b1edd", "parents": [ "abc45592bce8267a8e651c12ce94a1f83eaac7a6" ], "author": { "name": "Ben Hutchings", "email": "ben@decadent.org.uk", "time": "Mon Mar 28 17:12:52 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 00:12:33 2011 -0700" }, "message": "via-ircc: Pass PCI device pointer to dma_{alloc, free}_coherent()\n\nvia-ircc has been passing a NULL pointer to DMA allocation functions,\nwhich is completely invalid and results in a BUG on PowerPC. Now\nthat we always have the device pointer available, pass it in.\n\nReference: http://bugs.debian.org/619450\nReported-by: Andrew Buckeridge \u003candrewb@bgc.com.au\u003e\nSigned-off-by: Ben Hutchings \u003cben@decadent.org.uk\u003e\nTested-by: Andrew Buckeridge \u003candrewb@bgc.com.au\u003e [against 2.6.32]\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "abc45592bce8267a8e651c12ce94a1f83eaac7a6", "tree": "26734a7c7c65a0ee856f31a5e9634778b6041f48", "parents": [ "93ca3bb5df9bc8b2c60485e1cc6507c3d7c8e1fa" ], "author": { "name": "Ben Hutchings", "email": "ben@decadent.org.uk", "time": "Mon Mar 28 17:10:43 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 00:12:32 2011 -0700" }, "message": "via-ircc: Use pci_{get, set}_drvdata() instead of static pointer variable\n\nvia-ircc still maintains its own array of device pointers in Linux 2.4\nstyle. Worse, it always uses index 0, so it will crash if there are\nmultiple suitable devices in the system.\n\nSigned-off-by: Ben Hutchings \u003cben@decadent.org.uk\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ffd8c746fbef50cf12df239f9d23c2afe1a2c3cb", "tree": "a7004233c9607eee54fbb7fa4c40d386168a9d74", "parents": [ "24047e2c4feb8c126e92cc5bb7a863115c89bd72" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Mar 29 15:28:11 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 29 15:45:14 2011 -0400" }, "message": "iwlegacy: fix bugs in change_interface\n\nIf change_interface gets invoked during a firmware\nrestart, it may crash; prevent that from happening\nby checking if ctx-\u003evif is assigned.\n\nAdditionally, in my initial commit I forgot to set\nthe vif-\u003ep2p variable correctly, so fix that too.\n\nCc: stable@kernel.org [2.6.38+]\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24047e2c4feb8c126e92cc5bb7a863115c89bd72", "tree": "a027a11a04ef9ef53dce7f44eff76e26f20106bc", "parents": [ "0263aa45293838b514b8af674a03faf040991a90" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Tue Mar 29 13:43:14 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 29 15:45:14 2011 -0400" }, "message": "carl9170: Fix tx aggregation problems with some clients\n\nSome clients seem to rely upon the reception of BlockAckReqs to flush\ntheir rx reorder buffer. In order to fix aggregation for these clients\ncarl9170 should set IEEE80211_TX_STAT_AMPDU_NO_BACK to generate a\nBlockAckReq if the transmission of an AMPDU subframe fails.\n\nThis fixes aggregation problems with Intel 5100 Windows STAs (and maybe\nothers as well).\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "0263aa45293838b514b8af674a03faf040991a90" }