)]}' { "log": [ { "commit": "3ea9f2bf5a3b91ba18af9f25bfc9a32677ea47d8", "tree": "f98aad3dbffc108c538b9587040ed02bbe1650d3", "parents": [ "d57bc0feaa958bc8a6a0b9d3a29f78c699e50d2a" ], "author": { "name": "Andreas Schallenberg", "email": "Andreas.Schallenberg@3alitydigital.de", "time": "Wed Nov 24 22:15:16 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:25 2011 -0500" }, "message": "Blackfin: DNP5370: new board port\n\nSigned-off-by: Andreas Schallenberg \u003cAndreas.Schallenberg@3alitydigital.de\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "d57bc0feaa958bc8a6a0b9d3a29f78c699e50d2a", "tree": "87ce0faa31576525306124139865c14488b6d7b0", "parents": [ "874f6cfd3a05d5452064531078cae9b19a5e790c" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Tue Nov 23 10:00:15 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:24 2011 -0500" }, "message": "Blackfin: bf518f-ezbrd: fix dsa resources\n\nOn bf518-ezbrd with DSA Ethernet switch enabled, on chip MAC is\nconnecting to phy at address 3. If allowing the netdevice framework to\nprobe both 3 phys of the switch when registering MAC phy, phy at address\n1 is checked for link active status other than phy at address 3. If\nconnecting a cable to port 2 and leave port 1 open, link status in phy\n2 and 3 are online, while that in phy 1 is offline. So, the phy layer\nsets wrong offline status to net device on port 3. In this case, no data\ncan be transferred via ethernet port 2.\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "874f6cfd3a05d5452064531078cae9b19a5e790c", "tree": "59f350419005a237ba05f173436091c5c01b6e32", "parents": [ "9fc205283f8b163fba611a40226afdd82f4f29d3" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Wed Nov 17 07:34:58 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:24 2011 -0500" }, "message": "Blackfin: move \"-m elf32bfin\" to general LDFLAGS\n\nCommon code now invokes the linker directly which causes build failures\nwhen using an FDPIC toolchain. So move the emulation setting out of the\nmodule-specific LDFLAGS and into the common LDFLAGS.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "9fc205283f8b163fba611a40226afdd82f4f29d3", "tree": "6ef66405f8300804ecf31131dc02c15462d697f8", "parents": [ "b68233e7f0126dfe59e1a064da9e37827c1f35ec" ], "author": { "name": "Vivi Li", "email": "vivi.li@analog.com", "time": "Wed Nov 17 04:26:19 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:23 2011 -0500" }, "message": "Blackfin: kgdb_test: make sure to initialize num2\n\nWe check its value at runtime, so we want to avoid garbage across runs.\n\nSigned-off-by: Vivi Li \u003cvivi.li@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "b68233e7f0126dfe59e1a064da9e37827c1f35ec", "tree": "79f7891894b4a943a7166a42f8c404b1de281a39", "parents": [ "900de05182d520ff66378e74a7b18f7d9971a32d" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Wed Nov 17 06:52:39 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:23 2011 -0500" }, "message": "Blackfin: kgdb: disable preempt schedule when running single step in kgdb\n\nOtherwise, gdb continue operation after a breakpoint is hit may trap\ninto endless breakpoint.\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "900de05182d520ff66378e74a7b18f7d9971a32d", "tree": "98896918623213bef886c7e83f5bf7a537361466", "parents": [ "84e97c1014a2afe1a07beb1b6de5f2d867b368fd" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Wed Nov 17 06:19:28 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:22 2011 -0500" }, "message": "Blackfin: kgdb: disable interrupt when single stepping in ADEOS\n\nWhen ADEOS and kgdb are both enabled, single step in linux kernel may be\nscheduled to Xenomai core after return from interrupt handlers. This\nblocks gdb continue operation after a break point is hit. So, disable\ninterrupt when running gdb single step.\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "84e97c1014a2afe1a07beb1b6de5f2d867b368fd", "tree": "fc5bd785faa3055c6de6a1d0ccad911923ad6df8", "parents": [ "503f3d30c6f29c58fce77bfe47b04e3c667e7640" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Tue Nov 16 09:41:07 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:22 2011 -0500" }, "message": "Blackfin: SMP: kgdb: apply anomaly 257 work around\n\nWhen run kgdb testing, it looks like coreb hangs in single step or trap\nexception without handling anomaly 05000257 properly on bf561 v0.5. But,\nthe anomaly list says it apply to bf561 v0.4 and bellow. Apply its work\naround to 0.5 temporarily until the behavior and the root cause can be\nconfirmed by the hardware team.\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "503f3d30c6f29c58fce77bfe47b04e3c667e7640", "tree": "1f9a69b228cbd0b5682671fc1149387303c6aacd", "parents": [ "064cc44e62283227524c8e84ff247939728dec79" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Sun Nov 14 00:02:53 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:21 2011 -0500" }, "message": "Blackfin: fix building IPIPE code when XIP is enabled\n\nThe low level assembly needs to use the pseudo_long_call helper so that\nwe use the right call insn when doing kernel XIP.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "064cc44e62283227524c8e84ff247939728dec79", "tree": "a870fdcb5f67c912717888462eea41393808f5de", "parents": [ "e54b673081d12c46b47fdfe1772656cb2b43721d" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Fri Nov 12 05:54:32 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:21 2011 -0500" }, "message": "Blackfin: SMP: kgdb: flush core internal write buffer before flushinv\n\nKGDB single step in SMP kernel may hang forever in flushinv without a\nCSYNC ahead. This is because the core internal write buffers need to\nbe flushed before invalidating the data cache to make sure the insn\nfetch is not out of sync.\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "e54b673081d12c46b47fdfe1772656cb2b43721d", "tree": "5552e2c975a5e7e6cd1a4803d9f4b4853e6b7997", "parents": [ "e01b5b129661ee1eaddd4f2a0d8df6cb170339a5" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Fri Nov 12 02:45:38 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:20 2011 -0500" }, "message": "Blackfin: sport_uart resources: remove unused secondary RX/TX pins\n\nThe SPORT/UART driver doesn\u0027t use the secondary channel pins, so don\u0027t\ntry and request them thus keeping other drivers from using them.\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "e01b5b129661ee1eaddd4f2a0d8df6cb170339a5", "tree": "76276ebe5b66e62df46bdba830d75f725467c7d6", "parents": [ "624fab3bcdb46fd9678b5aa3d084c5208d925e48" ], "author": { "name": "Stefan Weil", "email": "weil@mail.berlios.de", "time": "Sun Nov 07 22:14:53 2010 +0100" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:20 2011 -0500" }, "message": "Blackfin: tll6527m: fix spelling in unused code (struct name)\n\nplatfrom -\u003e platform\n\nThis changes a struct name. The related code is conditionally\ncompiled and won\u0027t work because the include file linux/gpio-decoder.h\nis missing, so removing this code would be an even better solution.\n\nIf the missing include file is added, it must fix the spelling, too.\n\nSigned-off-by: Stefan Weil \u003cweil@mail.berlios.de\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "624fab3bcdb46fd9678b5aa3d084c5208d925e48", "tree": "ee4072d025d2124748a5d922a2b1558554844d99", "parents": [ "398834330cb07ba66fca5fb23a51075a67e4d4fa" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Fri Nov 05 11:29:46 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:19 2011 -0500" }, "message": "Blackfin: bf527-ezkit: add adau1373 chip address\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "398834330cb07ba66fca5fb23a51075a67e4d4fa", "tree": "a659f8f7bf7266b848e0c103ee8956317f0a0820", "parents": [ "36e11ab23e22243b9c608a08c8d68ca5686b6c9b" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Thu Nov 04 08:01:37 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:18 2011 -0500" }, "message": "Blackfin: no-mpu: fix masking of small uncached dma region\n\nWhen using an uncached DMA region less than 1 MiB, we try to mask off\nthe whole last 1 MiB for it. Unfortunately, this fails as we forgot\nto subtract one from the calculated mask, leading to the region still\nbe marked as cacheable.\n\nReported-by: Andrew Rook \u003candrew.rook@speakerbus.co.uk\u003e\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "36e11ab23e22243b9c608a08c8d68ca5686b6c9b", "tree": "c9cefc5f21879aac1d58ae88e52584a64f26df38", "parents": [ "527a1a83cc1ba4fc3e0f708cff062b834fbbcab9" ], "author": { "name": "Steven Miao", "email": "realmz6@gmail.com", "time": "Wed Nov 03 09:25:09 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:18 2011 -0500" }, "message": "Blackfin: pm: drop irq save/restore in standby and suspend to mem callback\n\nSince linux-2.6.31, the kernel suspend framework will do disable_irq/enable_irq,\nso save/restore irq in standby and suspend to mem callback should be dropped.\nOtherwise the common code notices things are enabled and complains.\n\nSigned-off-by: Steven Miao \u003crealmz6@gmail.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "527a1a83cc1ba4fc3e0f708cff062b834fbbcab9", "tree": "d256ff4eb9477b47a7ef2f8ed8bf92f6753cb5de", "parents": [ "e15124c14c12a3809dfce4517a2afcbe1cf9b346" ], "author": { "name": "Michael Hennerich", "email": "michael.hennerich@analog.com", "time": "Thu Oct 28 11:31:28 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:17 2011 -0500" }, "message": "MAINTAINERS: update Analog Devices support info\n\nAdd more Analog Devices driver entries and refine the differences between\nBlackfin-specific code and processor independent drivers.\n\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "e15124c14c12a3809dfce4517a2afcbe1cf9b346", "tree": "97bfe9696735e4d1235477965d5e234d6d7e6281", "parents": [ "77c90e3d35c17c371fbef91fa6e180e954c1faba" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Thu Oct 28 15:34:09 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:17 2011 -0500" }, "message": "Blackfin: dpmc.h: pull in new pll.h\n\nAny consumer of dpmc.h expects to use VR_CTL, so also pull in the new\nmach/pll.h header for those functions.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "77c90e3d35c17c371fbef91fa6e180e954c1faba", "tree": "50dd67ec4c1e98ecc040738ecc61b3bc016737ec", "parents": [ "ec5109e7ca086359c46fe5351121d0e125a2879b" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Wed Oct 27 20:21:51 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:17 2011 -0500" }, "message": "Blackfin: bf54x: add MMR layout for PINT\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "ec5109e7ca086359c46fe5351121d0e125a2879b", "tree": "59408b2f26ed2532fb7edbebfa8200343529677f", "parents": [ "10cdc1a78a02bb1d76b28b146083cb060399d86f" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Wed Oct 27 16:32:24 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:16 2011 -0500" }, "message": "Blackfin: bf561: SMP: add multicore pll handlers\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "10cdc1a78a02bb1d76b28b146083cb060399d86f", "tree": "0b2cdb9379109ca114983186b4a7430fe896d543", "parents": [ "73a400646b8e26615f3ef1a0a4bc0cd0d5bd284c" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Wed Oct 27 15:29:26 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:16 2011 -0500" }, "message": "Blackfin: unify pll.h headers\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "73a400646b8e26615f3ef1a0a4bc0cd0d5bd284c", "tree": "331002731d5aac594bb99a5a9cc61f5c0933ca69", "parents": [ "2c1657c29f810d0ba32cde54cba1e916815493e5" ], "author": { "name": "Yi Li", "email": "yi.li@analog.com", "time": "Thu Dec 17 08:20:32 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:15 2011 -0500" }, "message": "Blackfin: SMP: rewrite IPI handling to avoid memory allocation\n\nCurrently, sending an interprocessor interrupt (IPI) requires building up\na message dynamically which means memory allocation. But often times, we\nwill want to send an IPI in low level contexts where allocation is not\npossible which may lead to a panic(). So create a per-cpu static array\nfor the message queue and use that instead.\n\nFurther, while we have two supplemental interrupts, we are currently only\nusing one of them. So use the second one for the most common IPI message\nof all -- smp_send_reschedule(). This avoids ugly contention for locks\nwhich in turn would require an IPI message ...\n\nIn general, this improves SMP performance, and in some cases allows the\nSMP port to work in places it wouldn\u0027t before. Such as the PREEMPT_RT\nstate where the slab is protected by a per-cpu spin lock. If the slab\nkmalloc/kfree were to put the task to sleep, and that task was actually\nthe IPI handler, then the system falls down yet again.\n\nAfter running some various stress tests on the system, the static limit\nof 5 messages seems to work. On the off chance even this overflows, we\nsimply panic(), and we can review that scenario to see if the limit needs\nto be increased a bit more.\n\nSigned-off-by: Yi Li \u003cyi.li@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "2c1657c29f810d0ba32cde54cba1e916815493e5", "tree": "882d54edf3f003868af78eb2a92a0782f0c1bfd7", "parents": [ "05c3457ec2d5d02aec58d246179df19d6b2de752" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Mon Sep 21 11:51:31 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:15 2011 -0500" }, "message": "Blackfin: SMP: relocate blackfin_core_id() definition\n\nSince we\u0027re breaking apart some inter-header dependencies to avoid more\ncircular loops, move the blackfin_core_id() definition to the func that\nit is based upon.\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "05c3457ec2d5d02aec58d246179df19d6b2de752", "tree": "d9e49b541b646e6fcf2597231d35bf610f70bcf4", "parents": [ "54d756ed1a6498f403980ece028b61719cfbe813" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Wed Oct 27 10:07:33 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:14 2011 -0500" }, "message": "Blackfin: SMP: fix build breakage in cache.h\n\nThe SMP code needs \"asmlinkage\" which linkage.h provides.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "54d756ed1a6498f403980ece028b61719cfbe813", "tree": "becce49aa5d8b5defdb1ed66da953122ab03fcf4", "parents": [ "49fcc7b16f23167f0ee945228bd811a1a2728c77" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Mon Sep 21 11:51:31 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:14 2011 -0500" }, "message": "Blackfin: SMP: add missing arch_{read,write}_lock_flags helpers\n\nCommon code expects these to be defined for SMP ports, so add them.\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "49fcc7b16f23167f0ee945228bd811a1a2728c77", "tree": "8c952e78b22d94afbe687880cfd3c12f7adac170", "parents": [ "75734e660665b9bb5da8fc06beb491b716f9af77" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Mon Sep 21 11:51:31 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:13 2011 -0500" }, "message": "Blackfin: bf561: fix mem_map.h SMP overrides\n\nThe BF561 mem_map.h header has the __ASSEMBLY__/CONFIG_SMP checks out\nof order which leads to build errors for assembly code that happens to\ninclude this file.\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "75734e660665b9bb5da8fc06beb491b716f9af77", "tree": "7d734fbeacbb6672bc47badbf0f3a534e9a94071", "parents": [ "71a516adb6f3f178b0a961c55e7da75f8947afa5" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Mon Sep 21 11:51:31 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:13 2011 -0500" }, "message": "Blackfin: SMP: tweak platform_request_ipi() usage\n\nThis function takes an irq_handler_t function, but the prototype in\nthe header doesn\u0027t match the function definition. This is due to the\nsmp headers needing to avoid circular dependencies. So change the\nfunction to take a simple pointer.\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "71a516adb6f3f178b0a961c55e7da75f8947afa5", "tree": "f77f3fea2de37a28d813308c38591e38a0863ffa", "parents": [ "9c199b5965c76f90b297e01accb933624dc8d242" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Sep 21 11:51:31 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:12 2011 -0500" }, "message": "Blackfin: SMP: fix asm/bitops.h errors\n\nThe common asm-generic non-atomic bitops.h defines test_bit() for us, but\nwe need to use our own version. So redirect the definition of this func\nto avoid having to inline the rest of the asm-generic file.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "9c199b5965c76f90b297e01accb933624dc8d242", "tree": "a0893fedaa9ef6a1e27aacd7a09248e1ecba5946", "parents": [ "71a66287d9c2fd07f1017f23db6ccc68ac4c4a96" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Mon Sep 21 11:51:31 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:12 2011 -0500" }, "message": "Blackfin: SMP: fix cpumask misbehavior\n\nThe cpu maps are defines provided by common linux/cpumask.h, not local\nvariables. So stop exporting them locally and include the right header\nfor their definition.\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "71a66287d9c2fd07f1017f23db6ccc68ac4c4a96", "tree": "ac0c215c1212ab2887ce956562e44b12382011fb", "parents": [ "57afb399350b45c0067f4979ce9f0c754239b048" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Fri Mar 12 04:24:21 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:11 2011 -0500" }, "message": "Blackfin: SMP: rename the arch_xxx lock funcs to __raw_xxx\n\nThe external functions are named __raw_xxx, not arch_xxx, so rename the\nprototypes to match reality. This fixes some simple build errors in the\nbfin_ksyms.c code which exports these helpers to modules.\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "57afb399350b45c0067f4979ce9f0c754239b048", "tree": "8dc43f8df53b016621a6bc9f43b5761858dfe6d0", "parents": [ "94a038c2e6228727ae0549af75e97b9b634cd468" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Wed Sep 09 10:46:19 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:11 2011 -0500" }, "message": "serial: bfin_5xx: move resources into board files\n\nRather than maintain Kconfig entries where people have to enter raw\nnumbers and hardcode lists of addresses/pins in the driver itself,\npush it all to platform resources. This lets us simplify the driver,\nthe Kconfig, and gives board porters greater flexibility.\n\nIn the process, we need to also start supporting the early platform\ninterface. Not a big deal, but it causes the patch to be bigger than\na simple resource relocation.\n\nAll the Blackfin boards already have their resources updated and in\nplace for this change.\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "94a038c2e6228727ae0549af75e97b9b634cd468", "tree": "2428073e580a236b3324e1459105d8a8f2498f34", "parents": [ "a2ce077ab3ea30b61a39038cc8d14119c0b2e90a" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Wed Oct 27 10:06:32 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:10 2011 -0500" }, "message": "Blackfin: bf561: update a few more SIC_SYSCR locations\n\nLooks like I missed a few new spots when renaming the SICA macros.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "a2ce077ab3ea30b61a39038cc8d14119c0b2e90a", "tree": "16ab55aeae2c66c1bdce9fe55e1e0a1fd0f774c1", "parents": [ "53ee5826546df6b1a989393f8701d1380a441449" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Wed Oct 27 00:08:46 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:10 2011 -0500" }, "message": "Blackfin: drop asm/irq.h include from mach headers\n\nThese were only included because of the irq handling of the PLL funcs,\nand those PLL funcs have been moved out into their own header now.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "53ee5826546df6b1a989393f8701d1380a441449", "tree": "fbf87e496f67bbfbfc53c27e18b78d770163bf08", "parents": [ "1a5c226528990515c603bae04233016411b44159" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Oct 26 23:56:12 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:09 2011 -0500" }, "message": "Blackfin: bf51x/bf52x: drop redundant \"base\" def/cdef header\n\nThe defBF512.h header exists only to include defBF51x_base.h, and it is\nthe only place where defBF51x_base.h is included. So move the contents\nof the defBF51x_base.h header into the defBF512.h header.\n\nSame situation for the other def/cdef pairs.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "1a5c226528990515c603bae04233016411b44159", "tree": "c3f1fa9565c601ccbf00289e37f9c3d4ea258324", "parents": [ "51946b10cfc741bfdcb82ea6ba65e775702f3a27" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Oct 26 23:46:22 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:08 2011 -0500" }, "message": "Blackfin: clean up mach header includes\n\nThe main asm/blackfin.h header will pull in mach/blackfin.h to get\nall the fun Blackfin defines. So having any of the sub-mach headers\ntrying to include asm/blackfin.h makes no sense -- punt it.\n\nThe mach/blackfin.h header takes care of including the part-specific\ndef headers which in turn will include any other needed def file.\nSimilarly, it takes care of pulling in the part-specific cdef header.\nSo move this logic out of the blackfin.h when necessary.\n\nFurther, make sure the cdef headers do not waste time including the\ndef headers again.\n\nSince all parts need the common def/cdef headers, move this logic\nout of the part-specific headers and into the mach/blackfin.h file.\n\nFinally, we need to split the BF539 def header since the BF538 does\nnot have MXVR and we don\u0027t want to expose those MMRs.\n\nSo now all parts should have the same behavior:\n\tmach/blackfin.h\n\t\tasm/def_LPBlackfin.h\n\t\tpart-specific def.h\n\t\tif ! asm\n\t\t\tasm/cdef_LPBlackfin.h\n\t\t\tpart-specific cdef.h\nAnd the sub def/cdef headers only tail into what they need.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "51946b10cfc741bfdcb82ea6ba65e775702f3a27", "tree": "312392434dafe3a63638335e54034c3f9cb7dc3b", "parents": [ "c31b3f73855821d8292904a7c36f5ec9d2ba2c5b" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Oct 26 22:55:28 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:08 2011 -0500" }, "message": "Blackfin: bf533: merge fio_flag back into normal mach headers\n\nWe don\u0027t want the BF533 to be different in terms of its MMR headers, so\nmerge the FIO_FLAG helpers back into the normal place. To avoid circular\ndependencies with headers, turn the inline C funcs into CPP defines. Not\nlike there will be any code size differences.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "c31b3f73855821d8292904a7c36f5ec9d2ba2c5b", "tree": "0056e4dc5a40133c9459e9587a8c9cf0eaa92f73", "parents": [ "30e9b95a8233c11f53e0763e339621271865a4ec" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Oct 26 21:40:31 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:07 2011 -0500" }, "message": "Blackfin: bf561-ezkit: add SMP defconfig\n\nSince the SMP code paths tend to compile fail a lot, start a SMP defconfig\nso our nightly build tools will automatically test it.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "30e9b95a8233c11f53e0763e339621271865a4ec", "tree": "4f4b4db6aec99dd0c9ad2e81d3fa0d9d05029b09", "parents": [ "4de2bf8786ec8ec9a45b556e1ddf5c80c807a361" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Oct 26 21:30:29 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:07 2011 -0500" }, "message": "Blackfin: bf533: convert boards to gpio framework\n\nWe don\u0027t want people banging on MMRs directly. As for the ip0x board,\nit shouldn\u0027t need to muck with the CS pin directly as the Blackfin SPI\nbus master driver takes care of driving this.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "4de2bf8786ec8ec9a45b556e1ddf5c80c807a361", "tree": "7ac3dbd87b81d207c8417b5e581122ff5dba0fa4", "parents": [ "9887f41533c860777b2fcf2eccf04f95980ab52a" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Oct 25 21:11:10 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:06 2011 -0500" }, "message": "Blackfin: push gpio (port) defines into common headers\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "9887f41533c860777b2fcf2eccf04f95980ab52a", "tree": "128f96903ef5e2e693be46f078005feb1b8aaecb", "parents": [ "5e3bcf30d655c2e277c77b523347685d06bb9d31" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Oct 25 21:10:43 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:06 2011 -0500" }, "message": "Blackfin: bf54x: drop unused legacy MMR names\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "5e3bcf30d655c2e277c77b523347685d06bb9d31", "tree": "af3bcdca773f6ce0188d40f4b21b25288600b167", "parents": [ "9346dba55672a6f04b7bfd1faa081ff149995a3f" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Oct 25 18:11:09 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:05 2011 -0500" }, "message": "Blackfin: dma: constify MMR pointer array\n\nThe array of pointers is never written, so constify it.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "9346dba55672a6f04b7bfd1faa081ff149995a3f", "tree": "78720838d17b73ab0a535fa907df9b805f5a7442", "parents": [ "6c8e75a06c8ee32c68ce90afa4a0fe093327b0e4" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Oct 25 08:04:44 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:05 2011 -0500" }, "message": "Blackfin: standardize DMAC traffic control MMRs \u0026 MDMA MMRs\n\nUse the same naming convention for DMA traffic MMRs (most were legacy\nanyways) so we can avoid useless ifdef trees.\n\nSame goes for MDMA names -- this actually allows us to undo a bunch of\nifdef redirects that existed for this purpose alone.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "6c8e75a06c8ee32c68ce90afa4a0fe093327b0e4", "tree": "67b7753a344558f93fe0e8231ac89368e5acd69a", "parents": [ "cfbf1677a336d5e3db6e80d1ed58fbf4b29450ed" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Oct 25 08:02:30 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:04 2011 -0500" }, "message": "Blackfin: bfin_dma.h: start a header for DMA MMR layout\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "cfbf1677a336d5e3db6e80d1ed58fbf4b29450ed", "tree": "b8499f4dfe8c1c2b5c713080d2b327c6b39aa8db", "parents": [ "efb2d31c1c62de9a0e42b2b1981d1a90fc0b4618" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Feb 16 04:03:18 2010 -0500" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:04 2011 -0500" }, "message": "Blackfin: switch to asm-generic/io.h\n\nAcked-by: Arnd Bergmann \u003carnd@arndb.de\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "efb2d31c1c62de9a0e42b2b1981d1a90fc0b4618", "tree": "02696675f9365c97fa079f0b6960cbe97d4e1e62", "parents": [ "21aa8ec362b59458bea1144494ae53ca2d8b13ed" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Oct 26 21:52:59 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:03 2011 -0500" }, "message": "asm-generic/io.h: add reads[bwl]/writes[bwl] helpers\n\nA bunch of arches define reads[bwl]/writes[bwl] helpers for accessing\nmemory mapped registers. Since the Blackfin ones aren\u0027t specific to\nBlackfin code, move them to the common asm-generic/io.h for people.\n\nAcked-by: Arnd Bergmann \u003carnd@arndb.de\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "21aa8ec362b59458bea1144494ae53ca2d8b13ed", "tree": "b941d6175a651307c650cac5d02c1dbde6b841e4", "parents": [ "b1524e29e318e79b2d04bcbd651a7af8dff32bb3" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 02:45:57 2011 -0500" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:03 2011 -0500" }, "message": "net/irda: bfin_sir: back out transitional defines\n\nNow that the common header is sane, we can drop the transitional cruft.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "b1524e29e318e79b2d04bcbd651a7af8dff32bb3", "tree": "7e138995fa0f8727b61fdada567cbda3f95e1670", "parents": [ "709465d6ea0466454ef547e7d1065db2b23033a9" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Sep 28 03:16:01 2009 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:02 2011 -0500" }, "message": "Blackfin: bfin_serial.h: unify heavily duplicated serial code\n\nEach Blackfin port has been duplicating UART structures and defines when\nthere really is no need for it. So start a new bfin_serial.h header to\nunify all these pieces and give ourselves a fresh start.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "709465d6ea0466454ef547e7d1065db2b23033a9", "tree": "84c995bf4ce30510fc03b87f5b60ddbf7fedac7d", "parents": [ "759a3f3f3171c521229dda2335e5ab105f6fdc40" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Thu Oct 28 15:43:50 2010 -0400" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:18:02 2011 -0500" }, "message": "net/irda: bfin_sir: pull in serial headers for defines\n\nWe\u0027re in the process of cleaning up the global Blackfin namespace, so the\nbfin_sir driver needs to pull in the serial header explicitly now.\n\nThis does add a little transitional cruft to keep things compiling, but a\nfollow up patch in this series will cull that.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "759a3f3f3171c521229dda2335e5ab105f6fdc40", "tree": "16c95f046b345a649928709ff812d3563562a274", "parents": [ "1a314ad4b0e3d6d76fb04c0481e95bd026c57749" ], "author": { "name": "Bob Liu", "email": "lliubbo@gmail.com", "time": "Fri Sep 17 11:09:57 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:10:13 2011 -0500" }, "message": "Blackfin: musb-boards: push clkin value to platform resources\n\nIn order to not touch the driver file for different xtal usage,\npush the clkin value to board file and calculate the register\nvalue instead of hardcoding it.\n\nSigned-off-by: Bob Liu \u003clliubbo@gmail.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "1a314ad4b0e3d6d76fb04c0481e95bd026c57749", "tree": "dced5ebdc0e1df1a303c49296e18f41994dea454", "parents": [ "0c21e3aaf6ae85bee804a325aa29c325209180fd" ], "author": { "name": "Graf Yang", "email": "graf.yang@analog.com", "time": "Thu Jan 28 10:46:55 2010 +0000" }, "committer": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jan 10 07:10:13 2011 -0500" }, "message": "Blackfin: SMP: fix hotplug building after irq header shuffle\n\nSigned-off-by: Graf Yang \u003cgraf.yang@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n" }, { "commit": "0c21e3aaf6ae85bee804a325aa29c325209180fd", "tree": "81c5d698e1c40cc8f473b21c5587a34598754a64", "parents": [ "021db8e2bde53024a163fb4417a185de46fe77aa", "b2837fcf4994e699a4def002e26f274d95b387c1" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 17:16:27 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 17:16:27 2011 -0800" }, "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus:\n hfsplus: %L-to-%ll, macro correction, and remove unneeded braces\n hfsplus: spaces/indentation clean-up\n hfsplus: C99 comments clean-up\n hfsplus: over 80 character lines clean-up\n hfsplus: fix an artifact in ioctl flag checking\n hfsplus: flush disk caches in sync and fsync\n hfsplus: optimize fsync\n hfsplus: split up inode flags\n hfsplus: write up fsync for directories\n hfsplus: simplify fsync\n hfsplus: avoid useless work in hfsplus_sync_fs\n hfsplus: make sure sync writes out all metadata\n hfsplus: use raw bio access for partition tables\n hfsplus: use raw bio access for the volume headers\n hfsplus: always use hfsplus_sync_fs to write the volume header\n hfsplus: silence a few debug printks\n hfsplus: fix option parsing during remount\n\nFix up conflicts due to VFS changes in fs/hfsplus/{hfsplus_fs.h,unicode.c}\n" }, { "commit": "021db8e2bde53024a163fb4417a185de46fe77aa", "tree": "098a28bd2414ea2622493a1736a677dab5085dfc", "parents": [ "72eb6a791459c87a0340318840bb3bd9252b627b", "07fe0351702b6f0c9749e80cdbcb758686b0fe9b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 17:08:46 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 17:08:46 2011 -0800" }, "message": "Merge branch \u0027next-spi\u0027 of git://git.secretlab.ca/git/linux-2.6\n\n* \u0027next-spi\u0027 of git://git.secretlab.ca/git/linux-2.6: (77 commits)\n spi/omap: Fix DMA API usage in OMAP MCSPI driver\n spi/imx: correct the test on platform_get_irq() return value\n spi/topcliff: Typo fix threhold to threshold\n spi/dw_spi Typo change diable to disable.\n spi/fsl_espi: change the read behaviour of the SPIRF\n spi/mpc52xx-psc-spi: move probe/remove to proper sections\n spi/dw_spi: add DMA support\n spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs\n spi/dw_spi: Fix too short timeout in spi polling loop\n spi/pl022: convert running variable\n spi/pl022: convert busy flag to a bool\n spi/pl022: pass the returned sglen to the DMA engine\n spi/pl022: map the buffers on the DMA engine\n spi/topcliff_pch: Fix data transfer issue\n spi/imx: remove autodetection\n spi/pxa2xx: pass of_node to spi device and set a parent device\n spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.\n spi/pxa2xx: Add chipselect support for Sodaville\n spi/pxa2xx: Consider CE4100\u0027s FIFO depth\n spi/pxa2xx: Add CE4100 support\n ...\n" }, { "commit": "72eb6a791459c87a0340318840bb3bd9252b627b", "tree": "3bfb8ad99f9c7e511f37f72d57b56a2cea06d753", "parents": [ "23d69b09b78c4876e134f104a3814c30747c53f1", "55ee4ef30241a62b700f79517e6d5ef2ddbefa67" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 17:02:58 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 17:02:58 2011 -0800" }, "message": "Merge branch \u0027for-2.6.38\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu\n\n* \u0027for-2.6.38\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits)\n gameport: use this_cpu_read instead of lookup\n x86: udelay: Use this_cpu_read to avoid address calculation\n x86: Use this_cpu_inc_return for nmi counter\n x86: Replace uses of current_cpu_data with this_cpu ops\n x86: Use this_cpu_ops to optimize code\n vmstat: User per cpu atomics to avoid interrupt disable / enable\n irq_work: Use per cpu atomics instead of regular atomics\n cpuops: Use cmpxchg for xchg to avoid lock semantics\n x86: this_cpu_cmpxchg and this_cpu_xchg operations\n percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support\n percpu,x86: relocate this_cpu_add_return() and friends\n connector: Use this_cpu operations\n xen: Use this_cpu_inc_return\n taskstats: Use this_cpu_ops\n random: Use this_cpu_inc_return\n fs: Use this_cpu_inc_return in buffer.c\n highmem: Use this_cpu_xx_return() operations\n vmstat: Use this_cpu_inc_return for vm statistics\n x86: Support for this_cpu_add, sub, dec, inc_return\n percpu: Generic support for this_cpu_add, sub, dec, inc_return\n ...\n\nFixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c}\nas per Tejun.\n" }, { "commit": "23d69b09b78c4876e134f104a3814c30747c53f1", "tree": "40744de4f4126c21027ce537264524095e0e7979", "parents": [ "e744070fd4ff9d3114277e52d77afa21579adce2", "569ff2de2e1c8ac67c8df3a7367d46d0d9460a35" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 16:58:04 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 16:58:04 2011 -0800" }, "message": "Merge branch \u0027for-2.6.38\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq\n\n* \u0027for-2.6.38\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)\n usb: don\u0027t use flush_scheduled_work()\n speedtch: don\u0027t abuse struct delayed_work\n media/video: don\u0027t use flush_scheduled_work()\n media/video: explicitly flush request_module work\n ioc4: use static work_struct for ioc4_load_modules()\n init: don\u0027t call flush_scheduled_work() from do_initcalls()\n s390: don\u0027t use flush_scheduled_work()\n rtc: don\u0027t use flush_scheduled_work()\n mmc: update workqueue usages\n mfd: update workqueue usages\n dvb: don\u0027t use flush_scheduled_work()\n leds-wm8350: don\u0027t use flush_scheduled_work()\n mISDN: don\u0027t use flush_scheduled_work()\n macintosh/ams: don\u0027t use flush_scheduled_work()\n vmwgfx: don\u0027t use flush_scheduled_work()\n tpm: don\u0027t use flush_scheduled_work()\n sonypi: don\u0027t use flush_scheduled_work()\n hvsi: don\u0027t use flush_scheduled_work()\n xen: don\u0027t use flush_scheduled_work()\n gdrom: don\u0027t use flush_scheduled_work()\n ...\n\nFixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c\nas per Tejun.\n" }, { "commit": "e744070fd4ff9d3114277e52d77afa21579adce2", "tree": "5f397c684c61a50bd47014abfe685fd6c3d09d8c", "parents": [ "d004e4d3322340b6433caaef4a47ab8c933afb70", "c9b5f501ef1580faa30c40c644b7691870462201" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:55:48 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:55:48 2011 -0800" }, "message": "Merge branch \u0027sched-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027sched-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n sched: Constify function scope static struct sched_param usage\n sched: Fix strncmp operation\n sched: Move sched_autogroup_exit() to free_signal_struct()\n sched: Fix struct autogroup memory leak\n sched: Mark autogroup_init() __init\n sched: Consolidate the name of root_task_group and init_task_group\n" }, { "commit": "d004e4d3322340b6433caaef4a47ab8c933afb70", "tree": "f9ba6e6cb960fddb09da7c322d4b1dcb3f4b0e6f", "parents": [ "128283a47e7cc6754db3d2704004c1ed728d26db", "1c2a48cf65580a276552151eb8f78d78c55b828e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:55:31 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:55:31 2011 -0800" }, "message": "Merge branch \u0027x86-apic-cleanups-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027x86-apic-cleanups-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86: apic: Cleanup and simplify setup_local_APIC()\n x86: Further simplify mp_irq info handling\n x86: Unify 3 similar ways of saving mp_irqs info\n x86, ioapic: Avoid writing io_apic id if already correct\n x86, x2apic: Don\u0027t map lapic addr for preenabled x2apic systems\n x86, sfi: Use register_lapic_address()\n x86, apic: Use register_lapic_address() in init_apic_mapping()\n x86, apic: Remove early_init_lapic_mapping()\n x86, apic: Unify identical register_lapic_address() functions\n" }, { "commit": "128283a47e7cc6754db3d2704004c1ed728d26db", "tree": "b3b0db4cd62600776f5e3dd5762798a8bfe793d2", "parents": [ "442d1ba237c81304ccfa33887094e843183645f7", "6d5db4668796d903dc3bad2852c82073509c37d2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:54:03 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:54:03 2011 -0800" }, "message": "Merge branch \u0027mce-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp\n\n* \u0027mce-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:\n EDAC, MCE: Fix NB error formatting\n EDAC, MCE: Use BIT_64() to eliminate warnings on 32-bit\n EDAC, MCE: Enable MCE decoding on F15h\n EDAC, MCE: Allow F15h bank 6 MCE injection\n EDAC, MCE: Shorten error report formatting\n EDAC, MCE: Overhaul error fields extraction macros\n EDAC, MCE: Add F15h FP MCE decoder\n EDAC, MCE: Add F15 EX MCE decoder\n EDAC, MCE: Add an F15h NB MCE decoder\n EDAC, MCE: No F15h LS MCE decoder\n EDAC, MCE: Add F15h CU MCE decoder\n EDAC, MCE: Add F15h IC MCE decoder\n EDAC, MCE: Add F15h DC MCE decoder\n EDAC, MCE: Select extended error code mask\n" }, { "commit": "442d1ba237c81304ccfa33887094e843183645f7", "tree": "55d516e121f3bc558e808d05ae6407f845456db3", "parents": [ "fb5131e1880ea1ba3ba7197cd5cc66c9c288f715", "a135cef79a2927ecff800492a26cd314e9cba996" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:53:42 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:53:42 2011 -0800" }, "message": "Merge branch \u0027edac-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp\n\n* \u0027edac-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:\n amd64_edac: Disable DRAM ECC injection on K8\n EDAC: Fixup scrubrate manipulation\n amd64_edac: Remove two-stage initialization\n amd64_edac: Check ECC capabilities initially\n amd64_edac: Carve out ECC-related hw settings\n amd64_edac: Remove PCI ECS enabling functions\n amd64_edac: Remove explicit Kconfig PCI dependency\n amd64_edac: Allocate driver instances dynamically\n amd64_edac: Rework printk macros\n amd64_edac: Rename CPU PCI devices\n amd64_edac: Concentrate per-family init even more\n amd64_edac: Cleanup the CPU PCI device reservation\n amd64_edac: Simplify CPU family detection\n amd64_edac: Add per-family init function\n amd64_edac: Use cached extended CPU model\n amd64_edac: Remove F11h support\n" }, { "commit": "fb5131e1880ea1ba3ba7197cd5cc66c9c288f715", "tree": "f0d9f25f9079727b9ead5a2b4cc85a0fea9b4668", "parents": [ "d074b104cefcb6e8ded55a53e62fed59a246f55d", "8e1023016cf17152972b98bce6c144834a4916d5" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:50:50 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:50:50 2011 -0800" }, "message": "Merge branch \u0027for-linus\u0027 of git://git390.marist.edu/pub/scm/linux-2.6\n\n* \u0027for-linus\u0027 of git://git390.marist.edu/pub/scm/linux-2.6: (65 commits)\n [S390] prevent unneccesary loops_per_jiffy recalculation\n [S390] cpuinfo: use get_online_cpus() instead of preempt_disable()\n [S390] smp: remove cpu hotplug messages\n [S390] mutex: enable spinning mutex on s390\n [S390] mutex: Introduce arch_mutex_cpu_relax()\n [S390] cio: fix ccwgroup unregistration race condition\n [S390] perf: add DWARF register lookup for s390\n [S390] cleanup ftrace backend functions\n [S390] ptrace cleanup\n [S390] smp/idle: call init_idle() before starting a new cpu\n [S390] smp: delay idle task creation\n [S390] dasd: Correct retry counter for terminated I/O.\n [S390] dasd: Add support for raw ECKD access.\n [S390] dasd: Prevent deadlock during suspend/resume.\n [S390] dasd: Improve handling of stolen DASD reservation\n [S390] dasd: do path verification for paths added at runtime\n [S390] dasd: add High Performance FICON multitrack support\n [S390] cio: reduce memory consumption of itcw structures\n [S390] nmi: enable machine checks early\n [S390] qeth: buffer count imbalance\n ...\n" }, { "commit": "d074b104cefcb6e8ded55a53e62fed59a246f55d", "tree": "8c5b3a3992c5abab8b41b6e1f2837bc46f82b207", "parents": [ "31b6ca0af758a88e5e769b48cc6dde037ee37b96", "c413521eb4e2d7ffd5ce432a144708d479054bd3" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:50:14 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:50:14 2011 -0800" }, "message": "Merge branch \u0027rmobile-latest\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6\n\n* \u0027rmobile-latest\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (67 commits)\n ARM: mach-shmobile: update for SMP changes.\n ARM: mach-shmobile: update for GIC changes.\n ARM: mach-shmobile: Fix up clkdev fallout for SH73A0.\n dma: shdma: don\u0027t register the global die notifier multiple times\n ARM: mach-shmobile: Rely on run-time IRQ handlers\n ARM: mach-shmobile: Run-time IRQ handler for GIC\n ARM: mach-shmobile: Run-time IRQ handler for INTCA\n ARM: mach-shmobile: Enable CONFIG_MULTI_IRQ_HANDLER\n ARM: mach-shmobile: Use shared GIC entry macros\n ARM: mach-shmobile: mackerel: Add zboot support\n ARM: mach-shmobile: mackerel: Add HDMI sound support\n ARM: mach-shmobile: mackerel: add HDMI video support\n ARM: mach-shmobile: ap4evb: fixup clk_put timing of fsib_clk\n ARM: mach-shmobile: sh73a0: fix div4 table\n ARM: mach-shmobile: ap4/mackerel: modify wrong comment out of USB\n ARM: mach-shmobile: Mackerel VGA camera support\n mmc: sh_mmcif: make DMA support by the driver unconditional\n ARM: mach-shmobile: Add eMMC support through MMCIF on AG5EVM\n ARM: mach-shmobile: Use pullups for AG5EVM KEYSC pins\n ARM: mach-shmobile: sh73a0 GPIO pullup improvement\n ...\n" }, { "commit": "31b6ca0af758a88e5e769b48cc6dde037ee37b96", "tree": "e1968d7168affb25e33e2be2d1d102f94af98af0", "parents": [ "56b85f32d530d09d6805488ad00775d4e0e3baab", "554738da71004d96e06fb75f4772dfc3b0f47810" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:45:47 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:45:47 2011 -0800" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (58 commits)\n Input: wacom_w8001 - support pen or touch only devices\n Input: wacom_w8001 - use __set_bit to set keybits\n Input: bu21013_ts - fix misuse of logical operation in place of bitop\n Input: i8042 - add Acer Aspire 5100 to the Dritek list\n Input: wacom - add support for digitizer in Lenovo W700\n Input: psmouse - disable the synaptics extension on OLPC machines\n Input: psmouse - fix up Synaptics comment\n Input: synaptics - ignore bogus mt packet\n Input: synaptics - add multi-finger and semi-mt support\n Input: synaptics - report clickpad property\n input: mt: Document interface updates\n Input: fix double equality sign in uevent\n Input: introduce device properties\n hid: egalax: Add support for Wetab (726b)\n Input: include MT library as source for kerneldoc\n MAINTAINERS: Update input-mt entry\n hid: egalax: Add support for Samsung NB30 netbook\n hid: egalax: Document the new devices in Kconfig\n hid: egalax: Add support for Wetab\n hid: egalax: Convert to MT slots\n ...\n\nFixed up trivial conflict in drivers/input/keyboard/Kconfig\n" }, { "commit": "56b85f32d530d09d6805488ad00775d4e0e3baab", "tree": "e7fbe69e338ef775d3b2dd822aa915d259b4bc94", "parents": [ "3e5b08cbbf78bedd316904ab0cf3b27119433ee5", "568389c257fa7d74ce36c2f78bad31965fded4cf" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:39:20 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 14:39:20 2011 -0800" }, "message": "Merge branch \u0027tty-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6\n\n* \u0027tty-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits)\n serial: apbuart: Fixup apbuart_console_init()\n TTY: Add tty ioctl to figure device node of the system console.\n tty: add \u0027active\u0027 sysfs attribute to tty0 and console device\n drivers: serial: apbuart: Handle OF failures gracefully\n Serial: Avoid unbalanced IRQ wake disable during resume\n tty: fix typos/errors in tty_driver.h comments\n pch_uart : fix warnings for 64bit compile\n 8250: fix uninitialized FIFOs\n ip2: fix compiler warning on ip2main_pci_tbl\n specialix: fix compiler warning on specialix_pci_tbl\n rocket: fix compiler warning on rocket_pci_ids\n 8250: add a UPIO_DWAPB32 for 32 bit accesses\n 8250: use container_of() instead of casting\n serial: omap-serial: Add support for kernel debugger\n serial: fix pch_uart kconfig \u0026 build\n drivers: char: hvc: add arm JTAG DCC console support\n RS485 documentation: add 16C950 UART description\n serial: ifx6x60: fix memory leak\n serial: ifx6x60: free IRQ on error\n Serial: EG20T: add PCH_UART driver\n ...\n\nFixed up conflicts in drivers/serial/apbuart.c with evil merge that\nmakes the code look fairly sane (unlike either side).\n" }, { "commit": "3e5b08cbbf78bedd316904ab0cf3b27119433ee5", "tree": "0365745c1b7441c1868551c024410c829c3accc6", "parents": [ "da40d036fd716f0efb2917076220814b1e927ae1", "2af10844eb6ed104f9505bf3a7ba3ceb02264f31" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 13:16:28 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 13:16:28 2011 -0800" }, "message": "Merge branch \u0027usb-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6\n\n* \u0027usb-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits)\n USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)\n USB: serial: ftdi_sio: add support for TIOCSERGETLSR\n USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport\n USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()\n usb: ehci-omap: fix tll channel enable mask\n usb: ohci-omap3: fix trivial typo\n USB: gadget: ci13xxx: don\u0027t assume that PAGE_SIZE is 4096\n USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq\u0027s\n USB: gadget: update ci13xxx to work with g_ether\n USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers\n Revert \"USB: musb: pm: don\u0027t rely fully on clock support\"\n Revert \"USB: musb: blackfin: pm: make it work\"\n USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path\n USB: uas: Ensure we only bind to a UAS interface\n USB: uas: Rename sense pipe and sense urb to status pipe and status urb\n USB: uas: Use kzalloc instead of kmalloc\n USB: uas: Fix up the Sense IU\n usb: musb: core: kill unneeded #include\u0027s\n DA8xx: assign name to MUSB IRQ resource\n usb: gadget: g_ncm added\n ...\n\nManually fix up trivial conflicts in USB Kconfig changes in:\n\tarch/arm/mach-omap2/Kconfig\n\tarch/sh/Kconfig\n\tdrivers/usb/Kconfig\n\tdrivers/usb/host/ehci-hcd.c\nand annoying chip clock data conflicts in:\n\tarch/arm/mach-omap2/clock3xxx_data.c\n\tarch/arm/mach-omap2/clock44xx_data.c\n" }, { "commit": "da40d036fd716f0efb2917076220814b1e927ae1", "tree": "567893573a48e2954d82421e77606034d3b32f84", "parents": [ "aa58abc20fa85328a9f048e2626c0893691ff284", "c32e061fa19893ce4acf95d97d5613a161f0f1b7" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 12:47:02 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 12:47:02 2011 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (147 commits)\n [SCSI] arcmsr: fix write to device check\n [SCSI] lpfc: lower stack use in lpfc_fc_frame_check\n [SCSI] eliminate an unnecessary local variable from scsi_remove_target()\n [SCSI] libiscsi: use bh locking instead of irq with session lock\n [SCSI] libiscsi: do not take host lock in queuecommand\n [SCSI] be2iscsi: fix null ptr when accessing task hdr\n [SCSI] be2iscsi: fix gfp use in alloc_pdu\n [SCSI] libiscsi: add more informative failure message during iscsi scsi eh\n [SCSI] gdth: Add missing call to gdth_ioctl_free\n [SCSI] bfa: remove unused defintions and misc cleanups\n [SCSI] bfa: remove inactive functions\n [SCSI] bfa: replace bfa_assert with WARN_ON\n [SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list.\n [SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout.\n [SCSI] qla2xxx: Remove code to not reset ISP82xx on failure.\n [SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts.\n [SCSI] qla2xxx: Don\u0027t perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs.\n [SCSI] qla2xxx: Remove redundant module parameter permission bits\n [SCSI] qla2xxx: Add sysfs node for displaying board temperature.\n [SCSI] qla2xxx: Code cleanup to remove unwanted comments and code.\n ...\n" }, { "commit": "aa58abc20fa85328a9f048e2626c0893691ff284", "tree": "88d0f5dcfc9a7a8d1fff5e33ee07bfdea88fc087", "parents": [ "b4a45f5fe8078bfc10837dbd5b98735058bc4698" ], "author": { "name": "Dan Carpenter", "email": "error27@gmail.com", "time": "Fri Jan 07 20:47:37 2011 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 12:44:45 2011 -0800" }, "message": "input/tc3589x: fix compile error\n\nThere was a semi-colon missing and it broke the compile.\n\nSigned-off-by: Dan Carpenter \u003cerror27@gmail.com\u003e\nCc: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "07fe0351702b6f0c9749e80cdbcb758686b0fe9b", "tree": "49abac1907bae4be949696e806fbe0626e138d8f", "parents": [ "735759389b7143f95ae7badc97511e7e4729e873" ], "author": { "name": "Russell King - ARM Linux", "email": "linux@arm.linux.org.uk", "time": "Fri Jan 07 15:49:20 2011 +0000" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri Jan 07 13:44:24 2011 -0700" }, "message": "spi/omap: Fix DMA API usage in OMAP MCSPI driver\n\nRunning the latest kernel on the 4430SDP board with DMA API debugging\nenabled results in this:\n\nWARNING: at lib/dma-debug.c:803 check_unmap+0x19c/0x6f0()\nNULL NULL: DMA-API: device driver tries to free DMA memory it has not allocated\n[device address\u003d0x000000008129901a] [size\u003d260 bytes]\nModules linked in:\nBacktrace:\n[\u003cc003cbe0\u003e] (dump_backtrace+0x0/0x10c) from [\u003cc0278da8\u003e] (dump_stack+0x18/0x1c)\n r7:c1839dc0 r6:c0198578 r5:c0304b17 r4:00000323\n[\u003cc0278d90\u003e] (dump_stack+0x0/0x1c) from [\u003cc005b158\u003e] (warn_slowpath_common+0x58/0x70)\n[\u003cc005b100\u003e] (warn_slowpath_common+0x0/0x70) from [\u003cc005b214\u003e] (warn_slowpath_fmt+0x38/0x40)\n r8:c1839e40 r7:00000000 r6:00000104 r5:00000000 r4:8129901a\n[\u003cc005b1dc\u003e] (warn_slowpath_fmt+0x0/0x40) from [\u003cc0198578\u003e] (check_unmap+0x19c/0x6f0)\n r3:c03110de r2:c0304e6b\n[\u003cc01983dc\u003e] (check_unmap+0x0/0x6f0) from [\u003cc0198cd8\u003e] (debug_dma_unmap_page+0x74/0x80)\n[\u003cc0198c64\u003e] (debug_dma_unmap_page+0x0/0x80) from [\u003cc01d5ad8\u003e] (omap2_mcspi_work+0x514/0xbf0)\n[\u003cc01d55c4\u003e] (omap2_mcspi_work+0x0/0xbf0) from [\u003cc006dfb0\u003e] (process_one_work+0x294/0x400)\n[\u003cc006dd1c\u003e] (process_one_work+0x0/0x400) from [\u003cc006e50c\u003e] (worker_thread+0x220/0x3f8)\n[\u003cc006e2ec\u003e] (worker_thread+0x0/0x3f8) from [\u003cc00738d0\u003e] (kthread+0x88/0x90)\n[\u003cc0073848\u003e] (kthread+0x0/0x90) from [\u003cc005e924\u003e] (do_exit+0x0/0x5fc)\n r7:00000013 r6:c005e924 r5:c0073848 r4:c1829ee0\n---[ end trace 1b75b31a2719ed20 ]---\n\nI\u0027ve no idea why this driver uses NULL for dma_unmap_single instead of\nthe \u0026spi-\u003edev that is laying around just waiting to be used in that\nfunction - but it\u0027s an easy fix.\n\nAlso replace this comment with a FIXME comment:\n /* Do DMA mapping \"early\" for better error reporting and\n * dcache use. Note that if dma_unmap_single() ever starts\n * to do real work on ARM, we\u0027d need to clean up mappings\n * for previous transfers on *ALL* exits of this loop...\n */\nas the comment is not true - we do work in dma_unmap() functions,\nparticularly on ARMv6 and above. I\u0027ve corrected the existing unmap\nfunctions but if any others are required they must be added ASAP.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nAcked-by: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "735759389b7143f95ae7badc97511e7e4729e873", "tree": "48481675a7d52ce1a1af6bbf6c47fa6095b5a54d", "parents": [ "77e58efd134b553d723fd963f436920a6aaaa6df" ], "author": { "name": "Richard Genoud", "email": "richard.genoud@gmail.com", "time": "Fri Jan 07 15:26:01 2011 +0100" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri Jan 07 10:01:23 2011 -0700" }, "message": "spi/imx: correct the test on platform_get_irq() return value\n\nThe test \"if (spi_imx-\u003eirq \u003c\u003d 0)\" is not testing the IRQ value, but\nthe return value of platform_get_irq(). As platform_get_irq() can\nreturn an error (-ENXIO) or the IRQ value it found, the test should be\n\"if (spi_imx-\u003eirq \u003c 0)\"\n\n[grant.likely: Note: In general, Linux irq number 0 should also mean\nno irq, but arm still allows devices to be assigned 0, and the imx\nplatform uses 0 for one of the spi devices, so this patch is needed\nfor the device to work]\n\nSigned-off-by: Richard Genoud \u003crichard.genoud@gmail.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "b4a45f5fe8078bfc10837dbd5b98735058bc4698", "tree": "df6f13a27610a3ec7eb4a661448cd779a8f84c79", "parents": [ "01539ba2a706ab7d35fc0667dff919ade7f87d63", "b3e19d924b6eaf2ca7d22cba99a517c5171007b6" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 08:56:33 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 07 08:56:33 2011 -0800" }, "message": "Merge branch \u0027vfs-scale-working\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin\n\n* \u0027vfs-scale-working\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits)\n fs: scale mntget/mntput\n fs: rename vfsmount counter helpers\n fs: implement faster dentry memcmp\n fs: prefetch inode data in dcache lookup\n fs: improve scalability of pseudo filesystems\n fs: dcache per-inode inode alias locking\n fs: dcache per-bucket dcache hash locking\n bit_spinlock: add required includes\n kernel: add bl_list\n xfs: provide simple rcu-walk ACL implementation\n btrfs: provide simple rcu-walk ACL implementation\n ext2,3,4: provide simple rcu-walk ACL implementation\n fs: provide simple rcu-walk generic_check_acl implementation\n fs: provide rcu-walk aware permission i_ops\n fs: rcu-walk aware d_revalidate method\n fs: cache optimise dentry and inode for rcu-walk\n fs: dcache reduce branches in lookup path\n fs: dcache remove d_mounted\n fs: fs_struct use seqlock\n fs: rcu-walk for path lookup\n ...\n" }, { "commit": "c9b5f501ef1580faa30c40c644b7691870462201", "tree": "d22df12b72bc90b130254078ee71b1b7e7e3e521", "parents": [ "524429c31b486c05449666b94613f59f729c0a84" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Fri Jan 07 13:41:40 2011 +0100" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri Jan 07 15:55:45 2011 +0100" }, "message": "sched: Constify function scope static struct sched_param usage\n\nFunction-scope statics are discouraged because they are\neasily overlooked and can cause subtle bugs/races due to\ntheir global (non-SMP safe) nature.\n\nLinus noticed that we did this for sched_param - at minimum\nmake the const.\n\nSuggested-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: Message-ID: \u003cAANLkTinotRxScOHEb0HgFgSpGPkq_6jKTv5CfvnQM\u003dee@mail.gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "524429c31b486c05449666b94613f59f729c0a84", "tree": "00d0a06e864c0054cc6764f1afa6887e1281bcb6", "parents": [ "1c5354de90c900b369e2ebd36c3a065ede29eb93" ], "author": { "name": "Hillf Danton", "email": "dhillf@gmail.com", "time": "Thu Jan 06 20:58:12 2011 +0800" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri Jan 07 15:55:10 2011 +0100" }, "message": "sched: Fix strncmp operation\n\nOne of the operands, buf, is incorrect, since it is stripped and the\ncorrect address for subsequent string comparing could change if\nleading white spaces, if any, are removed from buf.\n\nIt is fixed by replacing buf with cmp.\n\nSigned-off-by: Hillf Danton \u003cdhillf@gmail.com\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cAANLkTinOPuYsVovrZpbuCCmG5deEyc8WgA_A1RJx_YK7@mail.gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "1c5354de90c900b369e2ebd36c3a065ede29eb93", "tree": "3144205e179f8c4503db06e8da95b604d1640b68", "parents": [ "e9aa1dd19fe49b5aed3ca94aab87576e534d2a39" ], "author": { "name": "Mike Galbraith", "email": "efault@gmx.de", "time": "Wed Jan 05 11:16:04 2011 +0100" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri Jan 07 15:54:39 2011 +0100" }, "message": "sched: Move sched_autogroup_exit() to free_signal_struct()\n\nPer Oleg\u0027s suggestion, undo fork failure free/put_signal_struct change,\nand move sched_autogroup_exit() to free_signal_struct() instead.\n\nSigned-off-by: Mike Galbraith \u003cefault@gmx.de\u003e\nReviewed-by: Oleg Nesterov \u003coleg@redhat.com\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003c1294222564.8369.6.camel@marge.simson.net\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "e9aa1dd19fe49b5aed3ca94aab87576e534d2a39", "tree": "04652389e0bd04e37a327002c21b8215c972eda8", "parents": [ "0ca0873555c0abe17b28c25b19f82857c0ddd2bc" ], "author": { "name": "Mike Galbraith", "email": "efault@gmx.de", "time": "Wed Jan 05 11:11:25 2011 +0100" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri Jan 07 15:54:37 2011 +0100" }, "message": "sched: Fix struct autogroup memory leak\n\nSeems I lost a change somewhere, leaking memory.\n\nsched: fix struct autogroup memory leak\n\nAdd missing change to actually use autogroup_free().\n\nSigned-off-by: Mike Galbraith \u003cefault@gmx.de\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003c1294222285.8369.2.camel@marge.simson.net\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "0ca0873555c0abe17b28c25b19f82857c0ddd2bc", "tree": "e777dbbcf9ea2e72f253c2816d7ec2e768e09178", "parents": [ "07e06b011db2b3300f6c975ebf293fc4c8c59942" ], "author": { "name": "Yong Zhang", "email": "yong.zhang0@gmail.com", "time": "Fri Jan 07 12:43:45 2011 +0800" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri Jan 07 15:54:36 2011 +0100" }, "message": "sched: Mark autogroup_init() __init\n\nautogroup_init() is only called at boot time.\n\nSigned-off-by: Yong Zhang \u003cyong.zhang0@gmail.com\u003e\nCc: Mike Galbraith \u003cefault@gmx.de\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003c1294375425-31065-1-git-send-email-yong.zhang0@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "07e06b011db2b3300f6c975ebf293fc4c8c59942", "tree": "f6f0fdd7c1707aa9badf16d1ceb4de1e16adb9e9", "parents": [ "cb600d2f83c854ec3d6660063e4466431999489b" ], "author": { "name": "Yong Zhang", "email": "yong.zhang0@gmail.com", "time": "Fri Jan 07 15:17:36 2011 +0800" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri Jan 07 15:54:34 2011 +0100" }, "message": "sched: Consolidate the name of root_task_group and init_task_group\n\nroot_task_group is the leftover of USER_SCHED, now it\u0027s always\nsame to init_task_group.\nBut as Mike suggested, root_task_group is maybe the suitable name\nto keep for a tree.\nSo in this patch:\n init_task_group --\u003e root_task_group\n init_task_group_load --\u003e root_task_group_load\n INIT_TASK_GROUP_LOAD --\u003e ROOT_TASK_GROUP_LOAD\n\nSuggested-by: Mike Galbraith \u003cefault@gmx.de\u003e\nSigned-off-by: Yong Zhang \u003cyong.zhang0@gmail.com\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003c20110107071736.GA32635@windriver.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "1c2a48cf65580a276552151eb8f78d78c55b828e", "tree": "68ed0628a276b33cb5aa0ad4899c1afe0a33a69d", "parents": [ "0aa002fe602939370e9476e5ec32b562000a0425", "cb600d2f83c854ec3d6660063e4466431999489b" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri Jan 07 14:14:15 2011 +0100" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri Jan 07 14:14:15 2011 +0100" }, "message": "Merge branch \u0027linus\u0027 into x86/apic-cleanups\n\nConflicts:\n\tarch/x86/include/asm/io_apic.h\n\nMerge reason: Resolve the conflict, update to a more recent -rc base\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "6d5db4668796d903dc3bad2852c82073509c37d2", "tree": "a6520e67f93ececcb71f6469fde28e63cb3bb52c", "parents": [ "50adbbd8a8e572ad2533eace228c841ec84028a3" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Thu Nov 25 15:40:27 2010 +0100" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:26 2011 +0100" }, "message": "EDAC, MCE: Fix NB error formatting\n\nMinor formatting fixup since the information which core was associated\nwith the MCE is not always valid.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "50adbbd8a8e572ad2533eace228c841ec84028a3", "tree": "34df56e03f29790ed6b16b73cf25d2a5793f0b05", "parents": [ "bad11e031862294265145d87dd4be1ae4af0d57f" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Sat Nov 13 11:44:26 2010 -0500" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:25 2011 +0100" }, "message": "EDAC, MCE: Use BIT_64() to eliminate warnings on 32-bit\n\nBuilding for X86_32 produces shift count warnings, so use BIT_64() to\neliminate the warnings.\n\ndrivers/edac/mce_amd.c:778: warning: left shift count \u003e\u003d width of type\ndrivers/edac/mce_amd.c:778: warning: left shift count \u003e\u003d width of type\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nCc: Doug Thompson \u003cdougthompson@xmission.com\u003e\nCc: bluesmoke-devel@lists.sourceforge.net\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "bad11e031862294265145d87dd4be1ae4af0d57f", "tree": "ccc411f7b6543e807137ad68f6c79c7ce5b88ba7", "parents": [ "1b07ca47ff2fbffbe09d8b0a0a25d8747a3cdcae" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Sep 22 17:44:51 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:24 2011 +0100" }, "message": "EDAC, MCE: Enable MCE decoding on F15h\n\nNow that everything is inplace, enable MCE decoding on F15h. Make\ninitcall routine a bit more readable.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "1b07ca47ff2fbffbe09d8b0a0a25d8747a3cdcae", "tree": "da2c3d76f16c13dcc24b40865489b93d0d8963f9", "parents": [ "fa7ae8cc8c88c0679eab24c5a1b5d3b134a5f542" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Tue Nov 09 19:41:49 2010 +0100" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:23 2011 +0100" }, "message": "EDAC, MCE: Allow F15h bank 6 MCE injection\n\nF15h adds a sixth MCE bank: adjust bank number check in the injection\ncode.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "fa7ae8cc8c88c0679eab24c5a1b5d3b134a5f542", "tree": "c6325ce19c35d8fb5b1e85358973c517866584aa", "parents": [ "6245288232516aadf293f575d1812dafb4696aee" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Sep 22 17:42:27 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:22 2011 +0100" }, "message": "EDAC, MCE: Shorten error report formatting\n\nShorten up MCi_STATUS flags and add BD\u0027s new deferred and poison types.\nAlso, simplify formatting.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "6245288232516aadf293f575d1812dafb4696aee", "tree": "8ca69fb55bbc1556b75cc3cbc5cccc1bca4aa613", "parents": [ "b8f85c477bdf1fec98ea7cbe952fdb5f40eb0aa7" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Sep 22 16:08:37 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:21 2011 +0100" }, "message": "EDAC, MCE: Overhaul error fields extraction macros\n\nMake macro names shorter thus making code shorter and more clear.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "b8f85c477bdf1fec98ea7cbe952fdb5f40eb0aa7", "tree": "b657c1b6bed836c19516401782ffc15d706ac6a0", "parents": [ "8259a7e5724c42c89d927b92cda3e0ab15b9ade9" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Sep 22 15:37:58 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:20 2011 +0100" }, "message": "EDAC, MCE: Add F15h FP MCE decoder\n\nAdd decoder for FP MCEs.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "8259a7e5724c42c89d927b92cda3e0ab15b9ade9", "tree": "9b6f55194f8566c4a13350059d61562c6e116b5b", "parents": [ "05cd667d668eb08845dd49c02130e5223121b715" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Sep 22 15:28:59 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:19 2011 +0100" }, "message": "EDAC, MCE: Add F15 EX MCE decoder\n\nIntegrate the single FIROB signature into an expanded table along with\nthe new BD MCE types.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "05cd667d668eb08845dd49c02130e5223121b715", "tree": "e6133b9f7edccfb41b530400b6d17630a9b63210", "parents": [ "b18434cad1740466f7a1c304ea4af0f4d3c874f1" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Sep 22 15:06:24 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:18 2011 +0100" }, "message": "EDAC, MCE: Add an F15h NB MCE decoder\n\nby (almost) reusing the F10h one since the signatures are the same.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "b18434cad1740466f7a1c304ea4af0f4d3c874f1", "tree": "4d19e97e1cdf4ab5ae31e71ae24d3b45d7b7700c", "parents": [ "70fdb494aa8c82f76745d5a32b8abc505813557c" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Sep 22 11:53:32 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:17 2011 +0100" }, "message": "EDAC, MCE: No F15h LS MCE decoder\n\nF15h BD doesn\u0027t generate LS MCEs so warn about it.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "70fdb494aa8c82f76745d5a32b8abc505813557c", "tree": "fc4799261257903f10b0f5ad7d2cfd68574ae2c1", "parents": [ "86039cd401e1780573733870f9c0bd458fc96ea2" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Tue Sep 21 20:45:10 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:16 2011 +0100" }, "message": "EDAC, MCE: Add F15h CU MCE decoder\n\nMCE bank 2 is redefined from a BU to a CU (Combined Unit) bank on F15h.\nAdd a decoder function for CU MCEs.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "86039cd401e1780573733870f9c0bd458fc96ea2", "tree": "64f2acb7d10b8d50983a8b625de849160274f676", "parents": [ "25a4f8b05917f8137bfff8a3f8c6c8c1ac561208" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Mon Nov 08 15:03:35 2010 +0100" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:15 2011 +0100" }, "message": "EDAC, MCE: Add F15h IC MCE decoder\n\nAdd support for decoding F15h IC MCEs.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "25a4f8b05917f8137bfff8a3f8c6c8c1ac561208", "tree": "8fc91785a6d142c9bf9f72c85df6b4abc234e152", "parents": [ "2be64bfac71378e1aa8c20031a499bd55e391244" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Sep 17 19:22:34 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:14 2011 +0100" }, "message": "EDAC, MCE: Add F15h DC MCE decoder\n\nAdd a decoder for F15h DC MCEs to support the new types of DC MCEs\nintroduced by the BD microarchitecture.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "2be64bfac71378e1aa8c20031a499bd55e391244", "tree": "e9eb0cb97d4262e2674e34865a4ee01504199086", "parents": [ "3c0eee3fe6a3a1c745379547c7e7c904aa64f6d5" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Sep 17 19:11:47 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:54:12 2011 +0100" }, "message": "EDAC, MCE: Select extended error code mask\n\nF15h enlarges the extended error code of an MCE to a 5-bit field\n(MCi_STATUS[20:16]). Add a mask variable which default 0xf is overridden\non F15h.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "a135cef79a2927ecff800492a26cd314e9cba996", "tree": "22236442bbf197c5231cb054fcc2b71e0a0cf240", "parents": [ "390944439f746824faec51b576f50cb5ef18745b" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Nov 26 19:24:44 2010 +0100" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:38:46 2011 +0100" }, "message": "amd64_edac: Disable DRAM ECC injection on K8\n\nK8 does not allow for an atomic RMW to a cacheline as F10h does so\ndisable the error injection interface for it.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "390944439f746824faec51b576f50cb5ef18745b", "tree": "5fd15e75e8e5e5d3dc1e176c655829f9d0f83aa9", "parents": [ "360b7f3c602ed80ce8c6b2585dcb76883a440c17" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Nov 24 19:52:09 2010 +0100" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:38:31 2011 +0100" }, "message": "EDAC: Fixup scrubrate manipulation\n\nMake the -\u003e{get|set}_sdram_scrub_rate return the actual scrub rate\nbandwidth it succeeded setting and remove superfluous arg pointer used\nfor that. A negative value returned still means that an error occurred\nwhile setting the scrubrate. Document this for future reference.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "360b7f3c602ed80ce8c6b2585dcb76883a440c17", "tree": "1737a8de8539548fc7a6ba965798234ba62c5ee7", "parents": [ "2299ef7114000f8e403797b7f9a972f54bc05fad" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Oct 15 19:25:38 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:34:03 2011 +0100" }, "message": "amd64_edac: Remove two-stage initialization\n\nNow that all prerequisites are in place, drop the two-stage driver\ninstances initialization in favor of the following simple init sequence:\n\n1. Probe PCI device: we only test ECC capabilities here and if none exit\nearly.\n\n2. If the hw supports ECC and it is/can be enabled, we init the per-node\ninstance.\n\nRemove \"amd64_\" prefix from static functions touched, while at it.\n\nThere actually should be no visible functional change resulting from\nthis patch.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "2299ef7114000f8e403797b7f9a972f54bc05fad", "tree": "bcce876e2bcd05d168e43422d3ad82a1a2419ae3", "parents": [ "ae7bb7c679e7ddba6c52d1a78a30f9bc868d9738" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Oct 15 17:44:04 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:34:02 2011 +0100" }, "message": "amd64_edac: Check ECC capabilities initially\n\nRework the code to check the hardware ECC capabilities at PCI probing\ntime. We do all further initialization only if we actually can/have ECC\nenabled.\n\nWhile at it:\n0. Fix function naming.\n1. Simplify/clarify debug output.\n2. Remove amd64_ prefix from the static functions\n3. Reorganize code.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "ae7bb7c679e7ddba6c52d1a78a30f9bc868d9738", "tree": "dccc3bdf93c8746a77d84ecb20b103ddab722e64", "parents": [ "f1db274e1ba7004909de4a9cee62f631c030ba3e" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Thu Oct 14 16:01:30 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:34:00 2011 +0100" }, "message": "amd64_edac: Carve out ECC-related hw settings\n\nThis is in preparation for the init path reorganization where we want\nonly to\n\n1) test whether a particular node supports ECC\n2) can it be enabled\n\nand only then do the necessary allocation/initialization. For that,\nwe need to decouple the ECC settings of the node from the instance\u0027s\ndescriptor.\n\nThe should be no functional change introduced by this patch.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "f1db274e1ba7004909de4a9cee62f631c030ba3e", "tree": "81c74f068eb1e428025053e30c05be264762a0b6", "parents": [ "027dbd6f5d419c25750d6a26c5c46f46f2093a11" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Thu Oct 14 14:37:13 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:33:59 2011 +0100" }, "message": "amd64_edac: Remove PCI ECS enabling functions\n\nPCI ECS is being enabled by default since 2.6.26 on AMD so this code is\njust superfluous now, remove it.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "027dbd6f5d419c25750d6a26c5c46f46f2093a11", "tree": "aa8edec28533e42dbbe1a177c0e08852f76adf6b", "parents": [ "cc4d8860fc37dd315b16a43202400d822ab63221" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Oct 13 22:12:15 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:33:58 2011 +0100" }, "message": "amd64_edac: Remove explicit Kconfig PCI dependency\n\nAMD_NB pulls in the dependency on PCI. Clarify/fix help text while at it.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "cc4d8860fc37dd315b16a43202400d822ab63221", "tree": "9058c36eb01cd7186a1bf11df21df235dc3e904a", "parents": [ "24f9a7fe3f19f3fd310f556364d01a22911724b3" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Wed Oct 13 16:11:59 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:33:57 2011 +0100" }, "message": "amd64_edac: Allocate driver instances dynamically\n\nRemove static allocation in favor of dynamically allocating space for as\nmany driver instances as northbridges present on the system.\n\nThere should be no functional change resulting from this patch.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "24f9a7fe3f19f3fd310f556364d01a22911724b3", "tree": "4fa8aff338bd58d42fc95b930f29a39b91bacedd", "parents": [ "8d5b5d9c7b86e44fda29a367db3ccd2815a52f7c" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Thu Oct 07 18:29:15 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:33:56 2011 +0100" }, "message": "amd64_edac: Rework printk macros\n\nAdd a macro per printk level, shorten up error messages. Add relevant\ninformation to KERN_INFO level. No functional change.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "8d5b5d9c7b86e44fda29a367db3ccd2815a52f7c", "tree": "3444029260ba184d6726bd46c48d9fa87a2fc3a5", "parents": [ "b8cfa02f833a614e80f851747c4ce14989a4cfd0" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Oct 01 20:11:07 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:33:54 2011 +0100" }, "message": "amd64_edac: Rename CPU PCI devices\n\nRename variables representing PCI devices to their BKDG names for faster\nsearch and shorter, clearer code.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "b8cfa02f833a614e80f851747c4ce14989a4cfd0", "tree": "64e9b0dca377952e8671b4a61c47bfffc73e6235", "parents": [ "bbd0c1f675d7d64fc02393d4985a069be5037b54" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Oct 01 19:35:38 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:33:53 2011 +0100" }, "message": "amd64_edac: Concentrate per-family init even more\n\nMove the remaining per-family init code into the proper place and\nsimplify the rest of the initialization. Reorganize error handling in\namd64_init_one_instance().\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "bbd0c1f675d7d64fc02393d4985a069be5037b54", "tree": "dea760f017356a6b8da787c42333aa712e81cbb7", "parents": [ "0092b20d4cf3de243b5c82b410ee02644cec2707" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Oct 01 19:27:58 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:33:52 2011 +0100" }, "message": "amd64_edac: Cleanup the CPU PCI device reservation\n\nShorten code and clarify comments, return proper -E* values on error.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" }, { "commit": "0092b20d4cf3de243b5c82b410ee02644cec2707", "tree": "b839d0953cf4949d93dd957f776aae0c4b9f8751", "parents": [ "395ae783b384e5243804b07fba3e3f8379ddf1d6" ], "author": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Oct 01 19:20:05 2010 +0200" }, "committer": { "name": "Borislav Petkov", "email": "borislav.petkov@amd.com", "time": "Fri Jan 07 11:33:51 2011 +0100" }, "message": "amd64_edac: Simplify CPU family detection\n\nConcentrate CPU family detection in the per-family init function.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\n" } ], "next": "395ae783b384e5243804b07fba3e3f8379ddf1d6" }