)]}' { "log": [ { "commit": "42379b1122bab7f9aefdbd4b7004a6fa89dfbae5", "tree": "cc5e0bb92bc6353d0476d45f5a68ff1fc23c4233", "parents": [ "c691cc84529ec88ccb32b174535bb61875888c90" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:45 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:56 2008 +0200" }, "message": "pci: change msi-x vector to 32bit\n\nwe are using 28bit pci (bus/dev/fn + 12 bits) as irq number, so the\ncache for irq number should be 32 bit too.\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "8b8e8c1bf7275eca859fe551dfa484134eaf013b", "tree": "3e2f950a8f34f419a59a31ddd12e9d7331911e3d", "parents": [ "6d50bc26836e16a9589e0b128d527c29e30d722a" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:23 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:52 2008 +0200" }, "message": "x86: remove irqbalance in kernel for 32 bit\n\nThis has been deprecated for years, the user space irqbalanced utility\nworks better with numa, has configurable policies, etc...\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmai.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "6d50bc26836e16a9589e0b128d527c29e30d722a", "tree": "8fd02d634b4cdf618e0328813b33c3a357015547", "parents": [ "e420dfb40c453a9760b86c7f338052bdb4dfa755" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:22 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:52 2008 +0200" }, "message": "x86: use 28 bits irq NR for pci msi/msix and ht\n\nalso print out irq no in /proc/interrups and /proc/stat in hex, so could\ntell bus/dev/func.\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "e420dfb40c453a9760b86c7f338052bdb4dfa755", "tree": "9a4c04b268b930bebd4fa7818c736820f770cfa2", "parents": [ "52b17329d6d0a4824b89206803a430915031ff23" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:21 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:52 2008 +0200" }, "message": "x86: put irq_2_iommu pointer into irq_desc\n\nwhen CONFIG_HAVE_SPARSE_IRQ\npreallocate some irq_2_iommu entries, and use get_one_free_irq_2_iomm to\nget new one and link to irq_desc if needed.\n\nelse will use dyn_array or static array.\n\nv2: \u003c\u003d nr_irqs fix\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "67fb283e148e9bd761f73691d3173b6eab9ba8db", "tree": "88ba8337dc5bc90e5f95d84d981f750bb7173dd2", "parents": [ "cb5bc83225a86ca53bbb889ed8439e4fd6cf44ac" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:18 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:51 2008 +0200" }, "message": "irq: separate sparse_irqs from sparse_irqs_free\n\nso later don\u0027t need compare with -1U\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "cb5bc83225a86ca53bbb889ed8439e4fd6cf44ac", "tree": "d2c43413adbc86562ab63498e3ce14e36ba253ed", "parents": [ "1d5f6b36c4736af1dac396d6267eb53dcc8c0021" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:17 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:51 2008 +0200" }, "message": "x86_64: rename irq_desc/irq_desc_alloc\n\nchange names:\n\n irq_desc() \u003d\u003d\u003e irq_desc_alloc\n\t__irq_desc() \u003d\u003d\u003e irq_desc\n\nAlso split a few of the uses in lowlevel x86 code.\n\nv2: need to check if desc is null in smp_irq_move_cleanup\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "46926b67fc663d357a1a8174328998a9e49da0b8", "tree": "33870a6c416bbc4d246ecfbf015a78c61943a36d", "parents": [ "7d94f7ca401dd7f445fda9a971a48aa5427b3e55" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:15 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:50 2008 +0200" }, "message": "generic: add irq_desc in function in parameter\n\nSo we could remove some duplicated calling to irq_desc\n\nv2: make sure irq_desc in init/main.c is not used without generic_hardirqs\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "c7fb03a475bd80c642c1345d85c7c550f63514b8", "tree": "575978fa259a52209f00d5bfaacb4d162caef0d3", "parents": [ "2c6927a38f65b53b62f86158fba29a068c4e8b6a" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:12 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:33 2008 +0200" }, "message": "irq, fs/proc: replace loop with nr_irqs for proc/stat\n\nReplace another nr_irqs loop to avoid the allocation of all sparse\nirq entries - use for_each_irq_desc instead.\n\nv2: make sure arch without GENERIC_HARDIRQS works too\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "2c6927a38f65b53b62f86158fba29a068c4e8b6a", "tree": "4f23cf5689c8fbaed771219b4afd3f785d8048bc", "parents": [ "9059d8fa4a3a9153da53da890039f7f956cc9d19" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:11 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:33 2008 +0200" }, "message": "irq: replace loop with nr_irqs with for_each_irq_desc\n\nThere are a handful of loops that go from 0 to nr_irqs and use\nget_irq_desc() on them. These would allocate all the irq_desc\nentries, regardless of the need for them.\n\nUse the smarter for_each_irq_desc() iterator that will only iterate\nover the present ones.\n\nv2: make sure arch without GENERIC_HARDIRQS work too\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "9059d8fa4a3a9153da53da890039f7f956cc9d19", "tree": "142f12d7843a4000eb9be7dd8a4a933ce2955f72", "parents": [ "7f95ec9e4c12fd067febfd57532da1166d75d858" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:10 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:32 2008 +0200" }, "message": "irq: add irq_desc_without_new\n\nadd an irq_desc accessor that will not allocate any sparse entry\nbut returns failure if there\u0027s no entry present.\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "7f95ec9e4c12fd067febfd57532da1166d75d858", "tree": "b395b6776485f60e3f5d9d820ad665161ef76771", "parents": [ "3060d6fe28570640c2d7d66d38b9eaa848c3b9e3" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:09 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:32 2008 +0200" }, "message": "x86: move kstat_irqs from kstat to irq_desc\n\nbased on Eric\u0027s patch ...\n\ntogether mold it with dyn_array for irq_desc, will allcate kstat_irqs for\nnr_irq_desc alltogether if needed. -- at that point nr_cpus is known already.\n\nv2: make sure system without generic_hardirqs works they don\u0027t have irq_desc\nv3: fix merging\nv4: [mingo@elte.hu] fix typo\n\n[ mingo@elte.hu ] irq: build fix\n\nfix:\n\n arch/x86/xen/spinlock.c: In function \u0027xen_spin_lock_slow\u0027:\n arch/x86/xen/spinlock.c:90: error: \u0027struct kernel_stat\u0027 has no member named \u0027irqs\u0027\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "3060d6fe28570640c2d7d66d38b9eaa848c3b9e3", "tree": "838027c0f8ac336d82b606ba9a61e02453a6de68", "parents": [ "e5a53714acfc7b5f868d07d27c5f02cb00b118db" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:08 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:31 2008 +0200" }, "message": "x86: put timer_rand_state pointer into irq_desc\n\nirq_timer_state[] is a NR_IRQS sized array that is a side-by array to\nthe real irq_desc[] array.\n\nIntegrate that field into the (now dynamic) irq_desc dynamic array and\nsave some RAM.\n\nv2: keep the old way to support arch not support irq_desc\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "08678b0841267c1d00d771fe01548d86043d065e", "tree": "7debb21f9e9a768ced43077f7376797a0c46f8c0", "parents": [ "bfea1238beac9d306eeac081c67de5ca6aec4c7a" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:05 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:29 2008 +0200" }, "message": "generic: sparse irqs: use irq_desc() together with dyn_array, instead of irq_desc[]\n\nadd CONFIG_HAVE_SPARSE_IRQ to for use condensed array.\nGet rid of irq_desc[] array assumptions.\n\nPreallocate 32 irq_desc, and irq_desc() will try to get more.\n\n( No change in functionality is expected anywhere, except the odd build\n failure where we missed a code site or where a crossing commit itroduces\n new irq_desc[] usage. )\n\nv2: according to Eric, change get_irq_desc() to irq_desc()\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "d17a55ded3393ad3878010bb3a8243a15a8d8df5", "tree": "782f135f3ec8868cde9959d1670a463b45e3b24c", "parents": [ "fa42d10dd5e1ff373061c0526f272106512301f9" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:01 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:08 2008 +0200" }, "message": "irq: make irqs in kernel stat use per_cpu_dyn_array\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "d60458b224d6b997a582a05cb8c4b9bed9e17a1d", "tree": "122710312c443069cb8e25a27032f09572550c45", "parents": [ "5aeecaf4908499b1fd006d313ccbacde6a6bac43" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:50:00 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:07 2008 +0200" }, "message": "irq: make irq_desc to use dyn_array\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "85c0f90978bf50596dbd23854648020f1f9b5bfd", "tree": "f66c598bb37b925dd6c74e4ce1fb06345c742c01", "parents": [ "6da55c3e8da88e8a7cb6452160776ad6706798ad" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:49:47 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:05 2008 +0200" }, "message": "irq: introduce nr_irqs\n\nat this point nr_irqs is equal NR_IRQS\n\nconvert a few easy users from NR_IRQS to dynamic nr_irqs.\n\nv2: according to Eric, we need to take care of arch without generic_hardirqs\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "1f8ff037a871690c762d267d8a052529d3102fc9", "tree": "1b0ce2fdcca21c06fc2b806964670ee0a3ffeab4", "parents": [ "1f3fcd4b1adc972d5c6a34cfed98931c46575b49" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:49:45 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:03 2008 +0200" }, "message": "x86: alloc dyn_array all together\n\nso could spare some memory with small alignment in bootmem\n\nalso tighten the alignment checking, and make print out less debug info.\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "1f3fcd4b1adc972d5c6a34cfed98931c46575b49", "tree": "a79b6c656a09a8424863a0025d5b20e7264d6999", "parents": [ "3ddfda11861d305b02ed810b522dcf48b74ca808" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:49:44 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:03 2008 +0200" }, "message": "add per_cpu_dyn_array support\n\nallow dyn-array in per_cpu area, allocated dynamically.\n\nusage:\n\n| /* in .h */\n| struct kernel_stat {\n| struct cpu_usage_stat cpustat;\n| unsigned int *irqs;\n| };\n|\n| /* in .c */\n| DEFINE_PER_CPU(struct kernel_stat, kstat);\n|\n| DEFINE_PER_CPU_DYN_ARRAY_ADDR(per_cpu__kstat_irqs, per_cpu__kstat.irqs, sizeof(unsigned int), nr_irqs, sizeof(unsigned long), NULL);\n\nafter setup_percpu()/per_cpu_alloc_dyn_array(), the dyn_array in\nper_cpu area is ready to use.\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "3ddfda11861d305b02ed810b522dcf48b74ca808", "tree": "869836872865f07fb56b5fa9649241143ae87b79", "parents": [ "38395738f581ce9417402f28774a8c4650264a00" ], "author": { "name": "Yinghai Lu", "email": "yhlu.kernel@gmail.com", "time": "Tue Aug 19 20:49:43 2008 -0700" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:52:02 2008 +0200" }, "message": "generic: add dyn_array support\n\nAllow crazy big arrays via bootmem at init stage.\nArchitectures use CONFIG_HAVE_DYN_ARRAY to enable it.\n\nusage:\n\n| static struct irq_desc irq_desc_init __initdata \u003d {\n| .status \u003d IRQ_DISABLED,\n| .chip \u003d \u0026no_irq_chip,\n| .handle_irq \u003d handle_bad_irq,\n| .depth \u003d 1,\n| .lock \u003d __SPIN_LOCK_UNLOCKED(irq_desc-\u003elock),\n| #ifdef CONFIG_SMP\n| .affinity \u003d CPU_MASK_ALL\n| #endif\n| };\n|\n| static void __init init_work(void *data)\n| {\n| struct dyn_array *da \u003d data;\n| struct irq_desc *desc;\n| int i;\n|\n| desc \u003d *da-\u003ename;\n|\n| for (i \u003d 0; i \u003c *da-\u003enr; i++)\n| memcpy(\u0026desc[i], \u0026irq_desc_init, sizeof(struct irq_desc));\n| }\n|\n| struct irq_desc *irq_desc;\n| DEFINE_DYN_ARRAY(irq_desc, sizeof(struct irq_desc), nr_irqs, PAGE_SIZE, init_work);\n\nafter pre_alloc_dyn_array() after setup_arch(), the array is ready to be\nused.\n\nVia this facility we can replace irq_desc[NR_IRQS] array with dyn_array\nirq_desc[nr_irqs].\n\nv2: remove _nopanic in pre_alloc_dyn_array()\n\nSigned-off-by: Yinghai Lu \u003cyhlu.kernel@gmail.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "5fef06e8c8c52aa7170dbbb068aa996d83738d38", "tree": "f46a1eefd68863bdae57afa004e5281801a6b61e", "parents": [ "0c5d1eb77a8be917b638344a22afe1398236482b", "278429cff8809958d25415ba0ed32b59866ab1a8" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:51:32 2008 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Oct 16 16:51:32 2008 +0200" }, "message": "Merge branch \u0027linus\u0027 into genirq\n" }, { "commit": "e413b210c541acac1a194085627db28a122f3bdf", "tree": "87e0e4b338e59709b357144cc7574d67692938b9", "parents": [ "acd15a836053ff6b48e78dc6de388b225ba9e40d", "9be7bbd54df3c9c393ccd19acc49f90c517d1291" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 16:35:43 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 16:35:43 2008 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)\n HID: build drivers for all quirky devices by default\n HID: add missing blacklist entry for Apple ATV ircontrol\n HID: add support for Bright ABNT2 brazilian device\n HID: Don\u0027t let Avermedia Radio FM800 be handled by usb hid drivers\n HID: fix numlock led on Dell device 0x413c/0x2105\n HID: remove warn() macro from usb hid drivers\n HID: remove info() macro from usb HID drivers\n HID: add appletv IR receiver quirk\n HID: fix a lockup regression when using force feedback on a PID device\n HID: hiddev.h: Fix example code.\n HID: hiddev.h: Fix mixed space and tabs in example code.\n HID: convert to dev_* prints\n HID: remove hid-ff\n HID: move zeroplus FF processing\n HID: move thrustmaster FF processing\n HID: move pantherlord FF processing\n HID: fix incorrent length condition in hidraw_write()\n HID: fix tty\u003c-\u003ehid deadlock\n HID: ignore iBuddy devices\n HID: report descriptor fix for remaining MacBook JIS keyboards\n ...\n" }, { "commit": "f129ea6d1efe0eddcbb1f0faaec5623788ad9e58", "tree": "4a2b72a2f98b19efeb5e28837ed1bfacffbbc961", "parents": [ "dded364bf4e1f0de67d7d7b9e77c06b23a9f081f" ], "author": { "name": "Anssi Hannula", "email": "anssi.hannula@gmail.com", "time": "Sat Oct 04 14:44:06 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:51:02 2008 +0200" }, "message": "HID: fix a lockup regression when using force feedback on a PID device\n\nCommit 8006479c9b75fb6594a7b746af3d7f1fbb68f18f introduced a spinlock in\ninput_dev-\u003eevent_lock, which is locked when handling input events.\nHowever, the hid-pidff driver sleeps when handling events as it waits for\nreports being sent to the device before changing the report contents\nagain.\nThis causes a system lockup when trying to use force feedback with a PID\ndevice, a regression introduced in 2.6.24 and 2.6.23.15.\n\nFix it by extracting the raw report data from struct hid_report\nimmediately when hid_submit_report() is called, therefore allowing\ndrivers to change the contents of struct hid_report immediately without\naffecting the already-queued transfer.\n\nIn hid-pidff, re-add the removed usbhid_wait_io() to\npidff_erase_effect() instead, to prevent a full report queue from causing\nthe submission to fail, thus not freeing up device memory.\npidff_erase_effect() is not called while dev-\u003eevent_lock is held.\n\nSigned-off-by: Anssi Hannula \u003canssi.hannula@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "dded364bf4e1f0de67d7d7b9e77c06b23a9f081f", "tree": "4b50bd64614d804d08a01d72202f846cd1f45086", "parents": [ "34a5ceee5eafe8cfa650d333304ce84a573ff7f0" ], "author": { "name": "Antonio Ospite", "email": "ospite@studenti.unina.it", "time": "Thu Oct 02 22:15:02 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:51:02 2008 +0200" }, "message": "HID: hiddev.h: Fix example code.\n\nFix hiddev.h example code.\nTo get the correct usage code, you need to set report_type and\nreport_id.\n\nSigned-off-by: Antonio Ospite \u003cospite@studenti.unina.it\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "34a5ceee5eafe8cfa650d333304ce84a573ff7f0", "tree": "8761735441e67a5da1fbe4646ed2c1912cdad6b3", "parents": [ "795750197f240ca2a3f064c0210c4efd40dbaed3" ], "author": { "name": "Antonio Ospite", "email": "ospite@studenti.unina.it", "time": "Thu Oct 02 22:14:54 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:51:01 2008 +0200" }, "message": "HID: hiddev.h: Fix mixed space and tabs in example code.\n\nFix mixed space and tabs in example code.\n\nSigned-off-by: Antonio Ospite \u003cospite@studenti.unina.it\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "76483cf4d0efbc35eaf9905a437f2f1be0221360", "tree": "3c5e2316ee8f8c9adb4a3fabea0ef709eb0e8f5b", "parents": [ "987fbc1f7d446f4bf7063d3b756ae29db80be75e" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Thu Sep 18 12:23:33 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:51:01 2008 +0200" }, "message": "HID: remove hid-ff\n\nhid-ff.c now calls only pidff (generic driver), the special ones are now\nin separate drivers. Invoke pidff on all non-special directly.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "987fbc1f7d446f4bf7063d3b756ae29db80be75e", "tree": "84e4057e429857b9a624b612b1180798c7893268", "parents": [ "10e41a711e55f485709b4ca157e587cf36ef5a69" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Thu Sep 18 12:23:32 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:51:01 2008 +0200" }, "message": "HID: move zeroplus FF processing\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "10e41a711e55f485709b4ca157e587cf36ef5a69", "tree": "5e7e31db5f0127370ab2cc7250b16061ec7fc3cb", "parents": [ "5f022298aab58ddff9bccdb28b82a59109789da9" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Thu Sep 18 12:23:31 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:51:00 2008 +0200" }, "message": "HID: move thrustmaster FF processing\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "5f022298aab58ddff9bccdb28b82a59109789da9", "tree": "08d87903b7a15c465a0b21cb7bdb7a30e9226cf3", "parents": [ "2b107d629dc0c35de606bb7b010b829cd247a93a" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Thu Sep 18 19:43:32 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:51:00 2008 +0200" }, "message": "HID: move pantherlord FF processing\n\nMove the force feedback processing into a separate module.\n\n[jkosina@suse.cz: fix Kconfig texts a little bit]\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "606bd0a8616a0e59021cb2997e942513f24f641d", "tree": "f4884ef8d1beb2c13eaa3af45512c7b43def30ae", "parents": [ "6edfa8dc33803a49ad936ead9840e453bee6ca3b" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri Jul 04 23:06:45 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:56 2008 +0200" }, "message": "HID: move logitech FF processing\n\nMerge the logitech force feedback processing directly into logitech\ndriver from the usbhid core.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "6edfa8dc33803a49ad936ead9840e453bee6ca3b", "tree": "a98640468512a114e356e5634467559fb17c9c69", "parents": [ "93c10132a7ac160df3175b53f7ee857625412165" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri Jun 27 20:41:02 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:56 2008 +0200" }, "message": "HID: move reset leds quirk\n\nMove the handling of the leds resetting from the core to\nthe dell and logitech drivers.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "93c10132a7ac160df3175b53f7ee857625412165", "tree": "64ea194ddd7791d44394bb2a918921a2906fe1ee", "parents": [ "fea6f1833b5bbff7066bcde1fa1141c9717bbad2" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri Jun 27 00:04:24 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:56 2008 +0200" }, "message": "HID: move connect quirks\n\nMove connecting from usbhid to the hid layer and fix also hidp in\nthat manner.\nThis removes all the ignore/force hidinput/hiddev connecting quirks.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "bd28ce008bdc68ef5902f68d2d62cbb7fa78c415", "tree": "188317a52208632b330c3e4b0e1cc4576dcb9178", "parents": [ "2b88b803018dbc2e9c68cbcd1739186e0715911a" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Wed Jun 25 23:47:04 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:55 2008 +0200" }, "message": "HID: move sony quirks\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "2b88b803018dbc2e9c68cbcd1739186e0715911a", "tree": "346a8af4c1cab58bfd5cd4dbe70ce2eae474e90d", "parents": [ "3715ade981d524f9bb3b851a1eb81d3604a873bc" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Wed Jun 25 23:03:55 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:55 2008 +0200" }, "message": "HID: remove rdesc quirk support\n\nRemove support for both dynamic and static report descriptor\nquirks. There is no longer rdesc code which it would support,\nso it\u0027s useless.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "3715ade981d524f9bb3b851a1eb81d3604a873bc", "tree": "a3daee2e0b696ca5ee3255fa76d2f5ba062ed739", "parents": [ "980a3da6acdd577ee3ae192e868dc52fe4b7f2e5" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Thu Jul 31 11:09:37 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:54 2008 +0200" }, "message": "HID: remove hid-input-quirks\n\nRemove the file since these is no user now.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "980a3da6acdd577ee3ae192e868dc52fe4b7f2e5", "tree": "420ca3c79bdca00967afe3683ff8acf11196174c", "parents": [ "949f8fef77186c7361d22e1ea6f42c76ceda42b0" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Wed Jun 25 22:31:48 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:54 2008 +0200" }, "message": "HID: move samsung quirks\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "3b8006e51038ef263a0404756d9e190c9a9f74d5", "tree": "903b947416afbac962f754e0ea57edad75574969", "parents": [ "1e76253220dbe66e048e55680266dd1f4af0be85" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Wed Jun 25 00:07:50 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:53 2008 +0200" }, "message": "HID: move monterey quirks\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "1e76253220dbe66e048e55680266dd1f4af0be85", "tree": "e3b1a340de062603b0e5d1e65e5e37a58973f7c3", "parents": [ "b5635b129b3ca3a9c879a36f58f5b8c4903d267a" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Tue Jun 24 23:46:21 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:53 2008 +0200" }, "message": "HID: move petalynx quirks\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "1f243e302cea1561ac881eb5d27041c5342beba4", "tree": "34939277ecafcf4ebf36e12de1f6f5a75f931f78", "parents": [ "3b239cd739a9499da08326356add3d9d992c7911" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Tue Jun 24 21:11:21 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:52 2008 +0200" }, "message": "HID: move ezkey quirks\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "3b239cd739a9499da08326356add3d9d992c7911", "tree": "859cbb6d09d381edcc8e0e9f12437e66bf00c7c5", "parents": [ "14a21cd459f97e3b3cc4fcde48fc5bcdb81d097e" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Tue Jun 24 20:42:25 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:52 2008 +0200" }, "message": "HID: move cherry quirks\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "14a21cd459f97e3b3cc4fcde48fc5bcdb81d097e", "tree": "cff11c6bad54ddecce5d74f6391fb487ac0104eb", "parents": [ "0f2213208f8da51bcb665309e3468f000489c04f" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Mon Jun 23 23:31:09 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:51 2008 +0200" }, "message": "HID: move a4tech quirks\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "0f2213208f8da51bcb665309e3468f000489c04f", "tree": "c4ae130d095b019bb0c1492966d41e5bd4a2a1c5", "parents": [ "90231e7eaf752856a2c13f786f36ec7f641bad28" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Mon Jun 23 22:54:08 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:51 2008 +0200" }, "message": "HID: move cypress quirks\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "90231e7eaf752856a2c13f786f36ec7f641bad28", "tree": "fd9056ecefeb52709c8ddca651428105552c2a84", "parents": [ "78a849a682a1d5ee7b7187b08abdc48656326a4e" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Mon Jun 23 21:56:07 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:51 2008 +0200" }, "message": "HID: move sunplus quirks\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "78a849a682a1d5ee7b7187b08abdc48656326a4e", "tree": "a56ddeecfb80f14d6ea38e81605cbb65bec03bc3", "parents": [ "880d29f109428be1d027adf919a7457d8fe41fd3" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri Jun 20 21:26:11 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:50 2008 +0200" }, "message": "HID: move microsoft quirks\n\nMove them from the core code to a separate driver.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "02ae9a1a8bc1d08a8fd5f6a0b8bde400b0f891b9", "tree": "a7584d1e9bcabdd22e63c12326e696c94d38dad8", "parents": [ "8c19a51591d06f5226499972567f528cf6066bb7" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri May 16 11:49:22 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:50 2008 +0200" }, "message": "HID: add compat support\n\nAdd compat option to hid code to allow loading of all modules on\nsystems which don\u0027t allow autoloading because of old userspace.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "8c19a51591d06f5226499972567f528cf6066bb7", "tree": "acfa47c0cb371c8b87f7282d19c627e44032dbe2", "parents": [ "d458a9dfc4de24870b8c747484b1988726534bee" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Wed Jun 18 23:36:49 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:49 2008 +0200" }, "message": "HID: move apple quirks\n\nMove them from the core code to a separate driver.\n\nSigned-off-by: Jiri Slaby \u003cjslaby@suse.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "d458a9dfc4de24870b8c747484b1988726534bee", "tree": "6ffc58f210054f615c60a495b1a4493d8e7cef14", "parents": [ "5f22a7992349c5ca3842190be52d5e9a1dd7adf4" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri May 16 11:49:20 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:49 2008 +0200" }, "message": "HID: move ignore quirks\n\nMove ignore quirks from usbhid-quirks into hid-core code. Also don\u0027t output\nwarning when ENODEV is error code in usbhid and try ordinal input in hidp\nwhen that error is returned.\n\nSigned-off-by: Jiri Slaby \u003cjslaby@suse.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "5f22a7992349c5ca3842190be52d5e9a1dd7adf4", "tree": "edcb112c502a311d51c29cc0304a1316dcd2d433", "parents": [ "022e8c4d08b3b06361594b60412db0242035c4b4" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri May 16 11:49:19 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:49 2008 +0200" }, "message": "HID: move logitech quirks\n\nMove them from the core and input code to a separate driver.\n\nSigned-off-by: Jiri Slaby \u003cjslaby@suse.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "022e8c4d08b3b06361594b60412db0242035c4b4", "tree": "9a8c57a3054737fb142054d146bad99723cd3cfa", "parents": [ "990436a7c9d0e5d395b83d79cfa32f89b8144e5b" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri May 16 11:49:18 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:49 2008 +0200" }, "message": "HID: move usage input mapping to hid.h\n\nThis mapping are currently used on 2 placces and will be needed by more\nquirk drivers, so move them to hid.h to allow them to use it.\n\nSigned-off-by: Jiri Slaby \u003cjslaby@suse.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "c500c9714011edab021591340042787722db9cf0", "tree": "d6bb0fe483c9f1c71c3d757e9c13d261ca01cd5f", "parents": [ "85cdaf524b7ddab627e7d15405693f2511ef7505" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri May 16 11:49:16 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:48 2008 +0200" }, "message": "HID: hid, make parsing event driven\n\nNext step for complete hid bus, this patch includes:\n- call parser either from probe or from hid-core if there is no probe.\n- add ll_driver structure and centralize some stuff there (open, close...)\n- split and merge usb_hid_configure and hid_probe into several functions\n to allow hooks/fixes between them\n\nSigned-off-by: Jiri Slaby \u003cjslaby@suse.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "85cdaf524b7ddab627e7d15405693f2511ef7505", "tree": "a85fb7c801df07842301c27dc57cf2eb5092f6ed", "parents": [ "e8c84f9a5f06912c94c38961096c994da3890a2e" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Fri May 16 11:49:15 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:48 2008 +0200" }, "message": "HID: make a bus from hid code\n\nMake a bus from hid core. This is the first step for converting all the\nquirks and separate almost-drivers into real drivers attached to this bus.\n\nIt\u0027s implemented to change behaviour in very tiny manner, so that no driver\nneeds to be changed this time.\n\nAlso add generic drivers for both usb and bt into usbhid or hidp\nrespectively which will bind all non-blacklisted device. Those blacklisted\nwill be either grabbed by special drivers or by nobody if they are broken at\nthe very rude base.\n\nSigned-off-by: Jiri Slaby \u003cjslaby@suse.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "e8c84f9a5f06912c94c38961096c994da3890a2e", "tree": "4b53131a3dc0ec39f82d33230df76764be9acd07", "parents": [ "7591103c08abade60aeddb432ed0686ddd0de1c6" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Mon May 19 15:50:01 2008 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Oct 14 23:50:47 2008 +0200" }, "message": "modpost: add support for hid\n\nGenerate aliases for hid device modules to support autoloading.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "8acd3a60bcca17c6d89c73cee3ad6057eb83ba1e", "tree": "d610c8d39246c33c499ee9d92d302d3ca9e89ae3", "parents": [ "c269bc00fcb876ae3b85f178f1e34601185c8ccc", "107e0008dfb8bd6366bc8827f5bbbc0c1f795d2d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 12:31:14 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 12:31:14 2008 -0700" }, "message": "Merge branch \u0027for-2.6.28\u0027 of git://linux-nfs.org/~bfields/linux\n\n* \u0027for-2.6.28\u0027 of git://linux-nfs.org/~bfields/linux: (59 commits)\n svcrdma: Fix IRD/ORD polarity\n svcrdma: Update svc_rdma_send_error to use DMA LKEY\n svcrdma: Modify the RPC reply path to use FRMR when available\n svcrdma: Modify the RPC recv path to use FRMR when available\n svcrdma: Add support to svc_rdma_send to handle chained WR\n svcrdma: Modify post recv path to use local dma key\n svcrdma: Add a service to register a Fast Reg MR with the device\n svcrdma: Query device for Fast Reg support during connection setup\n svcrdma: Add FRMR get/put services\n NLM: Remove unused argument from svc_addsock() function\n NLM: Remove \"proto\" argument from lockd_up()\n NLM: Always start both UDP and TCP listeners\n lockd: Remove unused fields in the nlm_reboot structure\n lockd: Add helper to sanity check incoming NOTIFY requests\n lockd: change nlmclnt_grant() to take a \"struct sockaddr *\"\n lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addresses\n lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INET\n lockd: Support non-AF_INET addresses in nlm_lookup_host()\n NLM: Convert nlm_lookup_host() to use a single argument\n svcrdma: Add Fast Reg MR Data Types\n ...\n" }, { "commit": "c269bc00fcb876ae3b85f178f1e34601185c8ccc", "tree": "cae61de48c631301984a5e8be345be220adabb82", "parents": [ "2d51b75370d83535883c66521b03fcd6a1f1f68d", "caf1859199e4360ffa826179bc0e881b0348f3ce" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 12:28:55 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 12:28:55 2008 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (26 commits)\n mfd: Fix warning in WM8350\n mfd: Add placeholders for WM8350 client devices\n da903x: add regulator support for DA9030/DA9034\n mfd: Add WM8350 subdevice registration helper\n regulator: Add WM8350 regulator support\n mfd: Add WM8350 interrupt support\n mfd: Add initialisation callback for WM8350\n mfd: Add GPIO pin configuration support for WM8350\n mfd: Add I2C control support for WM8350\n mfd: Core support for the WM8350 AudioPlus PMIC\n mfd: Add WM8350 watchdog register definitions\n mfd: Add WM8350 RTC register definitions\n mfd: Add WM8350 comparator register definitions\n mfd: Add WM8350 PMU register definitions\n mfd: Add WM8350 PMIC register definitions\n mfd: Add WM8350 GPIO register definitions\n mfd: Add WM8350 audio register definitions\n regulator: Export regulator name via sysfs\n regulator: Add WM8400 regulator support\n mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU\n ...\n" }, { "commit": "93f78da405685a756beeaeae4b5e41fcec39eab3", "tree": "98336d45e7d172380217181bf8b3507c4ecc9784", "parents": [ "43096597a4cc4bd3f912be8a69dbd12e27e08038" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 12:12:02 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 12:12:02 2008 -0700" }, "message": "Revert \"vt: fix background color on line feed\"\n\nThis reverts commit c9e587abfdec2c2aaa55fab83bcb4972e2f84f9b, and the\nsubsequent commits that fixed it up:\n\n - afa9b649 \"fbcon: prevent cursor disappearance after switching to 512\n character font\"\n\n - d850a2fa \"vt/fbcon: fix background color on line feed\"\n\n - 7fe3915a \"vt/fbcon: update scrl_erase_char after 256/512-glyph font\n switch\"\n\nby request of Alan Cox. Quoth Alan:\n \"Unfortunately it\u0027s wrong and its been causing breakages because\n various apps like ncurses expect our previous (and correct)\n behaviour.\"\n\nAlexander sent out a similar patch.\n\nRequested-by: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nTested-by: Jan Engelhardt \u003cjengelh@medozas.de\u003e\nCc: Alexander V. Lukyanov \u003clav@netis.ru\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "43096597a4cc4bd3f912be8a69dbd12e27e08038", "tree": "88cb4ba7562b0883aa987ee43f42a6c9bf9cd05f", "parents": [ "79aa79bac979323a8cb10438be16d29cf252167d", "485013717020cd8961337309e359d6cef43d6022" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 10:28:49 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 14 10:28:49 2008 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:\n qlge: Fix page size ifdef test.\n net: Rationalise email address: Network Specific Parts\n dsa: fix compile bug on s390\n netns: mib6 section fixlet\n enic: Fix Kconfig headline description\n de2104x: wrong MAC address fix\n s390: claw compile fixlet\n net: export genphy_restart_aneg\n cxgb3: extend copyrights to 2008\n cxgb3: update driver version\n net/phy: add missing kernel-doc\n pktgen: fix skb leak in case of failure\n mISDN/dsp_cmx.c: fix size checks\n misdn: use nonseekable_open()\n net: fix driver build errors due to missing net/ip6_checksum.h include\n" }, { "commit": "113aa838ec3a235d883f8357d31d90e16c47fc89", "tree": "4e25254fb0402aea01074244879f574e213a9f31", "parents": [ "510149e31974fdbb2c00c9bee6c0e2a688e61c85" ], "author": { "name": "Alan Cox", "email": "alan@redhat.com", "time": "Mon Oct 13 19:01:08 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Oct 13 19:01:08 2008 -0700" }, "message": "net: Rationalise email address: Network Specific Parts\n\nClean up the various different email addresses of mine listed in the code\nto a single current and valid address. As Dave says his network merges\nfor 2.6.28 are now done this seems a good point to send them in where\nthey won\u0027t risk disrupting real changes.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7591103c08abade60aeddb432ed0686ddd0de1c6", "tree": "523343b43b0c420666da18c64e1e9f21ff63dea5", "parents": [ "2be4ff2f084842839b041b793ed6237e8d1d315a", "9c6102d446985bca9c426cb2d9b478ed21d2b024" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 13 14:15:06 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 13 14:15:06 2008 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (66 commits)\n ata: Add documentation for hard disk shock protection interface (v3)\n ide: Implement disk shock protection support (v4)\n ide-cd: fix printk format warning\n piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list\n ide-atapi: assign taskfile flags per device type\n ide-cd: move cdrom_info.dma to ide_drive_t.dma\n ide: add ide_drive_t.dma flag\n ide-cd: add a debug_mask module parameter\n ide-cd: convert driver to new ide debugging macro (v3)\n ide: move SFF DMA code to ide-dma-sff.c\n ide: cleanup ide-dma.c\n ide: cleanup ide_build_dmatable()\n ide: remove needless includes from ide-dma.c\n ide: switch to DMA-mapping API part #2\n ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF\u003dn\n ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF\u003dn\n ide: __ide_dma_end() -\u003e ide_dma_end()\n pmac: remove needless pmac_ide_destroy_dmatable() wrapper\n pmac: remove superfluous pmif \u003d\u003d NULL checks\n ide: Two fixes regarding memory allocation\n ...\n" }, { "commit": "cf2fa66055d718ae13e62451bb546505f63906a2", "tree": "e206d3f04e74a34e9aa88d21af6c26eea21d4121", "parents": [ "4501a466f28788485604ee42641d7a5fe7258d16", "57f51dbc45f65f7ee1e8c8f77200bb8000e3e271" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 13 14:03:59 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 13 14:03:59 2008 -0700" }, "message": "Merge branch \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6\n\n* \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits)\n V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards\n V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default\n V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default.\n V4L/DVB (9183): S2API: Return error of the caller provides 0 commands.\n V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY\n V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE\n V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP\n V4L/DVB (9179): S2API: frontend.h cleanup\n V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.\n V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16\n V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator.\n V4L/DVB (9175): Remove NULL pointer in stb6000 driver.\n V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator.\n V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation\n V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API.\n V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API.\n V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod.\n V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams.\n V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote\n V4L/DVB: v4l2-dev: remove duplicated #include\n ...\n" }, { "commit": "add41cb46175618fd42bc1ca07fe7f9dd38bf702", "tree": "339fdb4605a4397098f3f5161a904167cb829929", "parents": [ "129eef96c9e25ce6516e2ddd5a338a14362b815b" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Oct 13 15:45:22 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:57 2008 +0100" }, "message": "mfd: Add placeholders for WM8350 client devices\n\nIn order to avoid merge problems further down the line add placeholders\nfor several of the WM8350 client devices and register them, otherwise\nthe patches adding the client devices will all try to update the same\ncode.\n\nAlso remove redundant checks for null regulator platform devices while\nwe\u0027re at it.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "da09155ac8d3f04c299b3d82a6ab0df8d03da632", "tree": "d6a74be9aa350179d51f5a0ffbcbf06c37a11d37", "parents": [ "ebccec0fa4e35dff0c18663a492a65f4dc6cad7a" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:15 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:56 2008 +0100" }, "message": "regulator: Add WM8350 regulator support\n\nThe WM8350 features six DCDC convertors (four buck and two boost), four\nLDO voltage regulators and two constant current sinks. This driver adds\nsupport for these through the regulator API.\n\nThis driver was written by Liam Girdwood with updates for submission\nfrom Mark Brown.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "ebccec0fa4e35dff0c18663a492a65f4dc6cad7a", "tree": "4850a46c52d48080fa5af5349aee04b4837ab148", "parents": [ "bcdd4efc1b6b8b98f30e127115f4bc7bbcd6f7ce" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:14 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:56 2008 +0100" }, "message": "mfd: Add WM8350 interrupt support\n\nThe WM8350 has an interrupt line to the CPU which is shared by the\ndevices on the CPU. This patch adds support for the interrupt\ncontroller within the WM8350 which identifies which identifies the\ninterrupt cause. In common with other similar chips this is done\noutside the standard interrupt framework due to the need to access\nthe interrupt controller over an interrupt-driven bus.\n\nThis code was all originally written by Liam Girdwood with updates for\nsubmission by me.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "bcdd4efc1b6b8b98f30e127115f4bc7bbcd6f7ce", "tree": "5f58a36bcfefb07cc9a44faf38c91b8bc7e3c1c1", "parents": [ "0e7203933224cbe09b5a9125f55b177b8dd5b1bd" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:13 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:56 2008 +0100" }, "message": "mfd: Add initialisation callback for WM8350\n\nSome functions of the WM8350 require board-specific initialisation on\nstartup. Provide a callback to the WM8350 driver in platform data\nfor platforms to use to configure the chip. Use of a callback allows\nplatforms to control the ordering of initialisation which can be\nimportant.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "0e7203933224cbe09b5a9125f55b177b8dd5b1bd", "tree": "a0353af32d8a45163885df722baa96c9090ec7a3", "parents": [ "c661a0b92d487ac20cc9cddbb8f4d40e4dcdbec1" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:12 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:55 2008 +0100" }, "message": "mfd: Add GPIO pin configuration support for WM8350\n\nThe WM8350 provides a number of user-configurable pins providing access\nto various signals generated by the functions on the chip. These are\nreferred to as GPIO pins in the device documentation but in Linux terms\nthey are more general than that, providing configuration of alternate\nfunctions.\n\nThis patch implements support for selecting the alternate functions for\nthese pins. They can also be used as GPIOs in the normal Linux sense -\na subsequent patch will add support for doing so.\n\nThis code was all written by Liam Girdwood and has had minor updates\nand rearrangements by Mark Brown.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "89b4012befb1abca5e86d232bc0e2a797b0d9825", "tree": "948e0ed0c35df087f0069356650da431a9fe50ff", "parents": [ "213f326810b6852bc54f38fd8bb71793f70f2c7a" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:10 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:55 2008 +0100" }, "message": "mfd: Core support for the WM8350 AudioPlus PMIC\n\nThe WM8350 is an integrated audio and power management subsystem\nintended for use as the primary PMIC in mobile multimedia applications.\nThe WM8350 can be controlled via either I2C or SPI - the control\ninterface is provided by a separate module in order to allow greatest\nflexibility in configuring the kernel.\n\nThis driver was originally written by Liam Girdwood and has since been\nupdated to current kernel APIs and split up for submission by me. All\nthe heavy lifting here was done by Liam.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "213f326810b6852bc54f38fd8bb71793f70f2c7a", "tree": "23e8a163c2c422a2dfda5e535c8c9e9e4582712e", "parents": [ "64a91ce93499dad945c4725d39b52f734d31b742" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:09 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:55 2008 +0100" }, "message": "mfd: Add WM8350 watchdog register definitions\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "64a91ce93499dad945c4725d39b52f734d31b742", "tree": "67aecb378eb08c5b52b9f47859abbe5ec92e4b60", "parents": [ "e7aabc346b111ae2ebcd390dcca7200a3361bb62" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:08 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:54 2008 +0100" }, "message": "mfd: Add WM8350 RTC register definitions\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "e7aabc346b111ae2ebcd390dcca7200a3361bb62", "tree": "46693de4ba6d4ad873d8be4aa5a9a00b56f668d1", "parents": [ "f8ea79c2ab39513e90054ed2828a85759d979bfa" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:07 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:54 2008 +0100" }, "message": "mfd: Add WM8350 comparator register definitions\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "f8ea79c2ab39513e90054ed2828a85759d979bfa", "tree": "c74a7503694853cf57e94e7d3041585405668949", "parents": [ "03c127ee1e0c5f7a5285d1af3d5c1571ac2646a1" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:06 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:54 2008 +0100" }, "message": "mfd: Add WM8350 PMU register definitions\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "03c127ee1e0c5f7a5285d1af3d5c1571ac2646a1", "tree": "a1070ae454b1ba9acf975d6b7d3d07a9e05cd9f9", "parents": [ "0c42e0b7631f1bfccc27eedac2a1e03f4c8c824c" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:05 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:54 2008 +0100" }, "message": "mfd: Add WM8350 PMIC register definitions\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "0c42e0b7631f1bfccc27eedac2a1e03f4c8c824c", "tree": "abfae8d4482e0a707931152d03bab2c1a4c01140", "parents": [ "06532c474718e330a7e3625ef91b94e22991128c" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:04 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:53 2008 +0100" }, "message": "mfd: Add WM8350 GPIO register definitions\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "06532c474718e330a7e3625ef91b94e22991128c", "tree": "64e611a8d41ecf8df806e4a743473182f13d00f4", "parents": [ "bc558a60b58f638ee0188affb627d4894a97b1c7" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 10 15:58:03 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:53 2008 +0100" }, "message": "mfd: Add WM8350 audio register definitions\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "42fad570b666256a3fd009e23e74cbb365a29ca8", "tree": "73257001bdb14a56ed69b504106e8fe392ef2f7c", "parents": [ "1d9f9f040035da73d6ee5d2b3b3a25483a980da3" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Thu Sep 11 11:12:01 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:53 2008 +0100" }, "message": "regulator: Add WM8400 regulator support\n\nThe WM8400 provides two programmable DCDC step-down (buck) convertors\nand four low-dropout (LDO) regulators. This driver provides support for\nruntime managment of these in the standard regulator API.\n\nSupport for configuration of the suspend and hibernate mode behaviour\nof the regulators is not yet included.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "1d9f9f040035da73d6ee5d2b3b3a25483a980da3", "tree": "de6decdace491997d40fba0908661fa9ffda5b9c", "parents": [ "8a62ab4c4eaf5bce4d9cc84b77d6402c4742d9ab" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Wed Sep 10 18:58:42 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:52 2008 +0100" }, "message": "mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU\n\nThe WM8400 is a highly integrated audio CODEC and power management unit\noptimised for use in mobile multimedia applications. This patch adds\ncore support for the WM8400 to the MFD subsystem.\n\nBoth I2C and SPI access are supported by the hardware but currently only\nI2C access is implemented. The code is structured to allow SPI support\nto be slotted in later.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "3de89609a82aa68f543cba263eb28725e0fde511", "tree": "ffe14e802ffb19cc34175c21eb3c5d7b8a3b8c2a", "parents": [ "a5766f11cfd3a0c03450d99c8fe548c2940be884" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Sep 09 16:21:17 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:51 2008 +0100" }, "message": "regulator: Fix typo\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "a5766f11cfd3a0c03450d99c8fe548c2940be884", "tree": "c511dd532fb20329d59c47b0f24b3ba587698319", "parents": [ "a447c0932445f92ce6f4c1bd020f62c5097a7842" ], "author": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Fri Oct 10 13:22:20 2008 +0100" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Mon Oct 13 21:51:50 2008 +0100" }, "message": "regulator: core - Rework machine API to remove string based functions.\n\nThis improves the machine level API in order to configure\nregulator constraints and consumers as platform data and removes the\nold string based API that required several calls to set up each regulator.\n\nThe intention is to create a struct regulator_init_data, populate\nit\u0027s fields with constraints, consumers devices, etc and then register\nthe regulator device from board.c in the standard Linux way.\n\ne.g. regulator LDO2 (supplying codec and sim) platform data.\n\n/* regulator LDO2 consumer devices */\nstatic struct regulator_consumer_supply ldo2_consumers[] \u003d {\n{\n\t.dev\t\u003d \u0026platform_audio_device.dev,\n\t.supply\t\u003d \"codec_avdd\",\n},\n{\n\t.dev\t\u003d \u0026platform_sim_device.dev,\n\t.supply\t\u003d \"sim_vcc\",\n}\n};\n\n/* regulator LDO2 constraints */\nstatic struct regulator_init_data ldo2_data \u003d {\n\t.constraints \u003d {\n\t\t.min_uV \u003d 3300000,\n\t\t.max_uV \u003d 3300000,\n\t\t.valid_modes_mask \u003d REGULATOR_MODE_NORMAL,\n\t\t.apply_uV \u003d 1,\n\t},\n\t.num_consumer_supplies \u003d ARRAY_SIZE(ldo2_consumers),\n\t.consumer_supplies \u003d ldo2_consumers,\n};\n\n/* machine regulator devices with thier consumers and constraints */\nstatic struct platform_device wm8350_regulator_devices[] \u003d {\n{\n\t.name \u003d \"wm8350-regulator\",\n\t.id \u003d WM8350_LDO_2,\n\t.dev \u003d {\n\t\t.platform_data \u003d \u0026ldo2_data,\n\t},\n},\n};\n\nChanges in detail:-\n\n o Removed all const char* regulator config functions in machine API.\n o Created new struct regulator_init_data to contain regulator\n machine configuration constraints and consmuers.\n o Changed set_supply(), set_machine_constraints(),\n set_consumer_device_supply() to remove their string identifier\n parameters. Also made them static and moved functions nearer top of\n core.c.\n o Removed no longer used inline func to_rdev()\n o Added regulator_get_init_drvdata() to retrieve init data.\n o Added struct device* as parameter to regulator_register().\n o Changed my email address.\n\nSigned-off-by: Eric Miao \u003ceric.miao@marvell.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "4abdc6ee7c47a1a6e12f95717e461baeebee5df7", "tree": "51cac3d66891d026483838563e35124467a8eb86", "parents": [ "08243ba731ee08ff42cf1589379c81567690218f" ], "author": { "name": "Elias Oltmanns", "email": "eo@nebensachen.de", "time": "Mon Oct 13 21:39:50 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:50 2008 +0200" }, "message": "ide: Implement disk shock protection support (v4)\n\nOn user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD\nFEATURE as specified in ATA-7 is issued to the device and processing of\nthe request queue is stopped thereafter until the specified timeout\nexpires or user space asks to resume normal operation. This is supposed\nto prevent the heads of a hard drive from accidentally crashing onto the\nplatter when a heavy shock is anticipated (like a falling laptop expected\nto hit the floor). Port resets are deferred whenever a device on that\nport is in the parked state.\n\nv3:\nElias Oltmanns \u003ceo@nebensachen.de\u003e wrote:\n[...]\n\u003e \u003e\u003e 1. Make sure that no negative value is being passed to\n\u003e \u003e\u003e jiffies_to_msecs() in ide_park_show().\n\u003e \u003e\u003e 2. Drop the superfluous variable hwif in ide_special_rq().\n\u003e \u003e\u003e 3. Skip initialisation of task and tf in ide_special_rq() if we are not\n\u003e \u003e\u003e handling a (un)park request.\n\u003e \u003e\n\u003e \u003e Well, #3 should have been done differently because we donn\u0027t want to\n\u003e \u003e check for REQ_(UN)?PARK_HEADS more often than is necessary.\n\u003e \n\u003e While preparing the backport to 2.6.27, it has just occurred to me that\n\u003e we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset()\n\u003e because this flag must not be set after *any* sort of access to the\n\u003e device.\n\nv4:\nFix a memory leak due to a missing blk_put_request() in\nissue_park_cmd(). Additionally, we should plug the queue when enqueueing\nthe unpark request because there is no guarantee that the park timeout\nhas not expired by then. Even though the chance for that to happen is\nvery slim, the request might end up hanging in the queue until the next\nI/O operation is queued up. While at it, clean up the code a little:\n- make issue_park_cmd() a function of type void since nobody cares for\n the return value anyway;\n- use blk_start_queueing() instead of __blk_run_queue() since we don\u0027t\n have to worry about recursion;\n- remove a superfluous pointer deference in task_no_data_intr().\n\nSigned-off-by: Elias Oltmanns \u003ceo@nebensachen.de\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e,\nCc: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0a9b6f8864362e31e348b12922a92b48b1b8cc94", "tree": "00aac30c355cf10cd5e2db7f99dd7cfb587c70db", "parents": [ "35d9b17fe2dc48514fa3fbeec910e54103d13333" ], "author": { "name": "Borislav Petkov", "email": "petkovbb@googlemail.com", "time": "Mon Oct 13 21:39:49 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:49 2008 +0200" }, "message": "ide: add ide_drive_t.dma flag\n\nThis flag is to accomodate ide-cd functionality into ide atapi.\n\nThere should be no functionality change resulting from this patch.\n\nSigned-off-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2dbe7e919eb696c86790797f8a814bef19a0d50a", "tree": "59f9b665d99790226e1fba3d463fae3edab2c95a", "parents": [ "db3f99ef7c30d541e4a78931acf2c64abe3e26d1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:47 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:47 2008 +0200" }, "message": "ide: move SFF DMA code to ide-dma-sff.c\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2bbd57cad3d72334c9fcc4e229a5a5b04dc6aebc", "tree": "c0866cb7b4a3e12d11179c65d86e2ba012db5002", "parents": [ "ffa15a6915b7f6f6f69b4a66e1100a9c68d11250" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:47 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:47 2008 +0200" }, "message": "ide: switch to DMA-mapping API part #2\n\nFollow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf\n(\"ide: switch to DMA-mapping API\"):\n\n* pci_{alloc,free}_consistent() -\u003e dma_{alloc,free}_coherent()\n in ide_{allocate,release}_dma_engine().\n\n* Add -\u003eprd_max_nents and -\u003eprd_ent_size fields to ide_hwif_t\n (+ set default values in ide_allocate_dma_engine()).\n\n* Make ide_{allocate,release}_dma_engine() available also\n for CONFIG_BLK_DEV_IDEDMA_SFF\u003dn. Then convert au1xxx-ide.c,\n scc_pata.c and sgiioc4.c to use them.\n\n* Add missing -\u003einit_dma method to scc_pata.\n\nThis patch also fixes:\n- -\u003edmatable_cpu leak for au1xxx-ide\n- too early realease of -\u003edmatable_cpu for scc_pata\n- wrong amount of -\u003edmatable_cpu memory being freed for sgiioc4\n\nWhile at it:\n- remove superfluous -\u003edma_base check from ide_unregister()\n- return -ENOMEM on error in ide_release_dma_engine()\n- beautify error message in ide_release_dma_engine()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ffa15a6915b7f6f6f69b4a66e1100a9c68d11250", "tree": "7893654c44bc570d55c00a682c9725816bd5c285", "parents": [ "de23ec9ca82357e6d337a2263befb1a65cf19c83" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:46 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:46 2008 +0200" }, "message": "ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF\u003dn\n\nMake ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF\u003dn\nand convert {ics,au1xxx-}ide.c to use it.\n\nWhile at it:\n- dump ATA Status register content on error\n- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "de23ec9ca82357e6d337a2263befb1a65cf19c83", "tree": "69bb25051df73e9815696245f613e54e0fc501f3", "parents": [ "653bcf5292a9ac4ffc07315198f0ef995e0646a8" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:46 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:46 2008 +0200" }, "message": "ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF\u003dn\n\nMake ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF\u003dn\nand convert {ics,au1xxx-}ide.c to use it.\n\nWhile at it:\n- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "653bcf5292a9ac4ffc07315198f0ef995e0646a8", "tree": "b13dcb203ecce6bd87297d9652be0a08d3528080", "parents": [ "f5e0b5ecb3afc8050259003067b6a1aef3635f12" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:46 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:46 2008 +0200" }, "message": "ide: __ide_dma_end() -\u003e ide_dma_end()\n\nWhile at it:\n- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f87904898e91923a91b925078ac933f05076c7fd", "tree": "bd4488b5510f8b67d4b2f92bd1d8616472076eee", "parents": [ "b9103da463f72d03c513acdb18f1aebd7931ed1e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:45 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:45 2008 +0200" }, "message": "ide-disk: move all ioctl handling to ide-disk_ioctl.c\n\nWhile at it:\n- idedisk_ioctl() -\u003e ide_disk_ioctl()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a36223b0dc14606b5c80aacbbe6288133693a841", "tree": "6ff55ad65a4c1a20763e5f694a5c4e810be7da73", "parents": [ "cf4049103be931fca133f66b3181490284a521c6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:43 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:43 2008 +0200" }, "message": "ide: remove ide_host_alloc_all()\n\n* Remove no longer used ide_host_alloc_all().\n\n* Add MAX_HOST_PORTS define and use it instead of MAX_HWIFS\n as the maximum number of host ports possible.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "bfa7d8e55f0c5ae22ef57eb22942c74fdde7b9bd", "tree": "2e21bf3c435a6a6646dd720652e33f0aacdb7b85", "parents": [ "a9ab09e26055a76295548ca36ec00de2f4367d32" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:42 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:42 2008 +0200" }, "message": "ide: -\u003eide_dma_clear_irq() -\u003e -\u003eclear_irq()\n\n* Rename -\u003eide_dma_clear_irq method to -\u003eclear_irq\n and move it from ide_hwif_t to struct ide_port_ops.\n\n* Move -\u003ewaiting_for_dma check inside -\u003eclear_irq method.\n\n* Move -\u003edma_base check inside -\u003eclear_irq method.\n\npiix.c:\n* Add ich_port_ops and remove init_hwif_ich() wrapper.\n\nThere should be no functional changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d6ff9f64e68d23feab44efa07cc6aee01f3ef32b", "tree": "902fb2b10372c396447c4ddb6097a088c809693b", "parents": [ "0e3d84a500d4e1672332b4961b98c35f6168e6f1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:41 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:41 2008 +0200" }, "message": "ide: merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr()\n\n* Add \u0027struct task_s\u0027 to ide_hwif_t and init it to the current command\n in do_rw_taskfile().\n\n* Merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6982daf71ca9a0b0c36043315e1968b3cb709b7c", "tree": "d3388ee3d67ba24392c3036b6d070aa20602e5c8", "parents": [ "7f612f272ad8abe82411f368bfacf793b466e1b3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:40 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:40 2008 +0200" }, "message": "ide: convert \u0027pio_mode\u0027 device setting to use DS_SYNC flag\n\n* Convert \u0027pio_mode\u0027 device setting to use DS_SYNC flag.\n\n* Remove unused special_t.b.{set_tune,serviced} and ide_drive_t.tune_req.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7f612f272ad8abe82411f368bfacf793b466e1b3", "tree": "4d850be5dc0569a24a7f8049d4b68d6ab511518e", "parents": [ "123995b97136cb41fa282f0ed2385f2c8066df96" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:40 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:40 2008 +0200" }, "message": "ide: remove [ata_]select_t\n\n* Use \u0027drive-\u003edn \u0026 1\u0027 in ide_init_disk().\n\n* remove [ata_]select_t.\n\nWhile at it:\n\n* Use ATA_DEVICE_OBS define in ide_port_init_devices_data().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0d346ba0730d84f04022f9f984d3f606f69cef37", "tree": "0e68c29e5cbea6766cded4feb9274d87698f8b72", "parents": [ "d1d76714e2f0c520b6c2a84ab5b050d0b3244949" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:38 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:38 2008 +0200" }, "message": "ide: sanitize ide*_pm_* enums\n\n* Move ide*_pm_* enums from ide-io.c to \u003clinux/ide.h\u003e.\n\n* idedisk_pm_* -\u003e ide_pm_*\n\n* ide_pm_state_* -\u003e ide_pm_*\n\n* No need to set ide_pm_* enums to the fixed values.\n\n* Uppercase ide_pm_* enums.\n\n* Fix/update comments.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d1d76714e2f0c520b6c2a84ab5b050d0b3244949", "tree": "605b10d60a0bcc59441ebe87503c03016df08dd1", "parents": [ "c67c216d810a05fffdbdbdf1b81048f0d4759287" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:38 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:38 2008 +0200" }, "message": "ide: fix HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices\n\nAdd IDE_DFLAG_LBA device flag and use it instead of -\u003eselect.b.lba.\n\nSince -\u003etf_load uses -\u003eselect.all for ATA Device/Head register this\nfixes HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e4634d4ef04fe6d7b114b612e5b71a84187ce76a", "tree": "5dee4fbce3bfd0d44d21a469040a3eb912fdfde3", "parents": [ "0ae4b3199ab1b6d511c6e0948e92049c272a346a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "message": "ide: remove superfluous -\u003edma field from ide_hwif_t\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0ae4b3199ab1b6d511c6e0948e92049c272a346a", "tree": "73840e552453e1ef260de880aa8214a65227aa57", "parents": [ "c39220483ebe6871fb129d4b2236cd95290c41fc" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "message": "ide: remove superfluous -\u003emedia field from ide_driver_t\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c39220483ebe6871fb129d4b2236cd95290c41fc", "tree": "3bdd4a754d2103a73aa2df4b218093765aa92c2b", "parents": [ "97100fc816badbbc162644cfde7ad39ae9211fb4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:37 2008 +0200" }, "message": "ide: DMA_PIO_RETRY -\u003e IDE_DFLAG_DMA_PIO_RETRY\n\nAdd IDE_DFLAG_DMA_PIO_RETRY and use it instead of\nide_drive_t.state + DMA_PIO_RETRY.\n\nThere should be no functional changes cause by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "97100fc816badbbc162644cfde7ad39ae9211fb4", "tree": "904faf5453c2dea32fa3fde5fda230118f3effda", "parents": [ "be3c096ebdbe3c828aacb5473751a22840753eff" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:36 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:36 2008 +0200" }, "message": "ide: add device flags\n\nAdd \u0027unsigned long dev_flags\u0027 to ide_drive_t and convert bitfields\nto IDE_DFLAG_* flags.\n\nWhile at it:\n- IDE_DFLAG_ADDRESSING -\u003e IDE_DFLAG_LBA48\n- fixup some comments\n- remove needless g-\u003eflags zeroing from ide*_probe()\n\nThere should be no functional changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "35c137531245118962eb40a550661afe317bec03", "tree": "5fa3030baf4fad7a451d3ba991d57b5641a3a094", "parents": [ "1ea1031cf92b8b8bfbe796d8e8d38b68300475d2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:36 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:36 2008 +0200" }, "message": "ide-disk: set_addressing() fixes\n\n* Return -EIO if arg \u003e 0 and LBA48 is unsupported.\n\n* No need to reset -\u003eaddressing.\n\n* Make -\u003eaddressing a single bit flag.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e1c7c4641aae8d278fca62b3b5cffad3a8dcb0a4", "tree": "5fee46f00db24a3ca301dca5fb2d3baddfdd2938", "parents": [ "b22b2ca4ff0730b14d14bcc36bd1b84873557512" ], "author": { "name": "Borislav Petkov", "email": "petkovbb@googlemail.com", "time": "Mon Oct 13 21:39:35 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:35 2008 +0200" }, "message": "ide: add a driver-wide debugging macro\n\nAdd __ide_debug_log() debugging macro which is controlled by drive-\u003edebug_mask.\nThe macro has to have the macro DRV_NAME defined in each driver before use.\nAlso, add different debugging levels depending on the functionality debugged.\n\nSigned-off-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b22b2ca4ff0730b14d14bcc36bd1b84873557512", "tree": "e7cf77e0dcbaf7785dc2756da4fae98fa948a2de", "parents": [ "5aeddf907f149cae7e19b7c23ccea3823d00698c" ], "author": { "name": "Borislav Petkov", "email": "petkovbb@googlemail.com", "time": "Mon Oct 13 21:39:34 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:34 2008 +0200" }, "message": "ide: add drive-\u003edebug_mask switch\n\nAdd a debugging on/off switch for controlling driver debugging\nmessages dynamically.\n\nSigned-off-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5aeddf907f149cae7e19b7c23ccea3823d00698c", "tree": "c3507ed9a078f94bb091ed6557f570927b34f255", "parents": [ "91ddc9988efeaed487eb7dd81d2557e1b1d501ef" ], "author": { "name": "Borislav Petkov", "email": "petkovbb@googlemail.com", "time": "Mon Oct 13 21:39:34 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:34 2008 +0200" }, "message": "ide: unify conversion macros\n\nIntroduce to_ide_drv() and ide_drv_g() macros and replace the respective\ndefinitions of similar ones in each driver.\n\nThere should be no functionality change resulting from this patch.\n\nSigned-off-by: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "baf08f0be6d986521bb2fbdc7af51fc4847da734", "tree": "5ac765703ad79edeafc6eec39fe42850bd6b5dc6", "parents": [ "aa5d2de7b080873f6d9ac3aede423c9713bf0caa" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: make ide_transfer_pc() static\n\n* Move -\u003eticks field from struct ide_floppy_obj to ide_drive_t.\n\n* Move idefloppy_transfer_pc() to ide-atapi.c and make\n ide_transfer_pc() use it.\n\n* Always use ide_transfer_pc as a handler in ide_issue_pc().\n\n* Remove no longer used idefloppy_start_pc_transfer(),\n ide*_transfer_pc() and \u0027handler\u0027 argument from ide_issue_pc().\n\n* Make ide_transfer_pc() static.\n\nWhile at it:\n\n* idefloppy_transfer_pc() -\u003e ide_delayed_transfer_pc()\n\n* IDEFLOPPY_TICKS_DELAY -\u003e IDEFLOPPY_PC_DELAY\n\n* -\u003eticks -\u003e -\u003epc_delay\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aa5d2de7b080873f6d9ac3aede423c9713bf0caa", "tree": "babf0dbf6a7d7e545053736e5ae6976faddabfd7", "parents": [ "85e39035ca381846b031690f4d1ac1f0660da0a2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Oct 13 21:39:32 2008 +0200" }, "message": "ide: make ide_pc_intr() static\n\n* Always use ide_pc_intr as a handler in ide_pc_intr().\n\n* Remove no longer used ide*_pc_intr() and \u0027handler\u0027\n argument from ide_{transfer_pc,pc_intr}().\n\n* Make ide_pc_intr() static.\n\nThere should be no functional changes caused by this patch.\n\nCc: Borislav Petkov \u003cpetkovbb@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" } ], "next": "85e39035ca381846b031690f4d1ac1f0660da0a2" }