)]}' { "log": [ { "commit": "3fcdb3301fc08eabfe82d75bcbb2d8545de7fdbf", "tree": "9b828dfb4c80fed7da1f348383b57cf3f431ca94", "parents": [ "3246739c232742f67e8bab8b2ddbf6a30580ef8d" ], "author": { "name": "Ranjhith Kalisamy", "email": "ranjhith@codeaurora.org", "time": "Fri Sep 02 20:01:06 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:54 2011 -0700" }, "message": "msm: kgsl: Prevent writes to ringbuffer WPTR from being dropped\n\nSometimes, the writes to ringbuffer WPTR register are dropped. This will\nmake the GPU to go to idle before completing all the commands that it is\nsubmitted with. This workaround prevents the writes from being dropped.\n\nCRs-Fixed: 302173\nSigned-off-by: Ranjhith Kalisamy \u003cranjhith@codeaurora.org\u003e\n" }, { "commit": "3246739c232742f67e8bab8b2ddbf6a30580ef8d", "tree": "71abca02aabd4ec8341417626272b6b021acdb77", "parents": [ "86fa95cfcad8a0485f5d7a86e7b88bafd168cf20" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 18 16:51:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:53 2011 -0700" }, "message": "mfd: pm8xxx-irq: set mask on suspend flag\n\nThe pm8xxx irq controller doesn\u0027t have wakeup source configuration bits.\nIt relies on managing wakeup interrupts in software. The generic irq code\nsupports managing wakeup interrupts if the irq_chip is defined with\nIRQCHP_MASK_ON_SUSPEND.\n\nUpdate the pm8xxx irq controller to use IRQCHIP_MASK_ON_SUSPEND.\n\nFor a chip that implements IRQCHP_MASK_ON_SUSPEND a mask callback\nis a must. This callback will be called when the system goes to\nsuspend on all non-wakeup interrupts.\n\nCRs-Fixed: 303137\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "86fa95cfcad8a0485f5d7a86e7b88bafd168cf20", "tree": "0c9528bfeb6d47c8e8ad0f4f5ce043ef28bd54d4", "parents": [ "db0a4b099e03ef0d4fc3027bfbf71ba97a479cca" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Mon Aug 29 15:31:38 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:53 2011 -0700" }, "message": "msm: pm: Remove unused latency and residency values\n\nTargets that use cpuidle use power calculations to determine the\nsleep mode that the cpu can enter. Older targets without cpuidle\nwill still continue to use residency and latency to determine the\nsleep mode to enter.\n\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "db0a4b099e03ef0d4fc3027bfbf71ba97a479cca", "tree": "1f7c61e09f19f63713f160aab9761d02d38af851", "parents": [ "3a30bdae40a7b5f72d159ec03f7ec59a3aeb3b61" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Tue Aug 23 09:32:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:52 2011 -0700" }, "message": "ASoC: WCD9310: Add separate widgets for each spk amplifier\n\nAdd separate widgets for two external speakers amplifiers,\nso that each speaker amplifier is turned off when the DAPM path for\nthat speaker in codec is powered off. This is needed to avoid pops\ncaused by having one combined external speaker widget turned off\nafter one of the codec DAPM paths is turned off.\n\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "3a30bdae40a7b5f72d159ec03f7ec59a3aeb3b61", "tree": "905f9fc752b63136a2514863b4c1745da14c7c57", "parents": [ "1f6fd72fc2062d128fe46c98537aa1a78eba2772" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Mon Aug 15 10:36:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:52 2011 -0700" }, "message": "ASoC: msm8960: Use DAPM_PRE and POST for MCLK\n\nFor proper codec turn on, MCLK should be enabled before any of the\ncodec blocks are enabled. To avoid click and pops, MCLK should be\ndisabled after all the codec blocks are disabled.\n\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "1f6fd72fc2062d128fe46c98537aa1a78eba2772", "tree": "516b49fd6418337ea33ba8d0b6b25142ce7ccec5", "parents": [ "95ae357a3490af9764322c2cd2679edc099337fd" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Thu Aug 11 10:36:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:51 2011 -0700" }, "message": "ASoC: WCD9310: Update codec register reset values\n\nAfter tape out of wcd9310 1.0, some of the codec register reset values\nare updated by the HW team. These changes are going to be reflected in\nwcd9310 1.1 and wcd9310 2.0.\n\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "95ae357a3490af9764322c2cd2679edc099337fd", "tree": "34cd10e1e84ecc8432c54d37c3c58021584253b7", "parents": [ "bd5297fc4302caa64a2168afac71963b2f06b089" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Tue Mar 15 14:58:12 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:51 2011 -0700" }, "message": "msm: qdsp5: Add AAC encoding support on 7x27a\n\nAdd Tunnel and Non Tunnel mode AAC encoding support\non 7x27a target.\n\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "bd5297fc4302caa64a2168afac71963b2f06b089", "tree": "eabfd7406165275039561fa7596a1e4c20cd6388", "parents": [ "b84120b47e318d5144604e7249e0e0bc119e1301" ], "author": { "name": "Ranjhith Kalisamy", "email": "ranjhith@codeaurora.org", "time": "Thu Aug 25 15:07:26 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:50 2011 -0700" }, "message": "msm: kgsl: Fix bug in postmortem dump register decode\n\nSigned-off-by: Ranjhith Kalisamy \u003cranjhith@codeaurora.org\u003e\n" }, { "commit": "b84120b47e318d5144604e7249e0e0bc119e1301", "tree": "a491c79a185f9512601072cdbd4b43ea67342830", "parents": [ "b07e1ae25764e415a9d7fea689889c641136eab2" ], "author": { "name": "Amir Samuelov", "email": "amirs@codeaurora.org", "time": "Sat Sep 03 17:49:43 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:49 2011 -0700" }, "message": "msm_fb: display: Add Chimei MIPI-DSI WXGA panel driver.\n\nAdd Chimei MIPI-DSI WXGA (1366x768) panel driver.\n\nSigned-off-by: Amir Samuelov \u003camirs@codeaurora.org\u003e\n" }, { "commit": "b07e1ae25764e415a9d7fea689889c641136eab2", "tree": "00e58b5214b8eae6620e67811813d16421c300ca", "parents": [ "57f90c16858a07d63308cd6a289ced153482668d" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Fri Sep 02 11:58:42 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:49 2011 -0700" }, "message": "mmc: 8064: Disable runtime PM for SDCC on Simulator\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "57f90c16858a07d63308cd6a289ced153482668d", "tree": "e82262db80792a2fbfa8d211656d5dae23da945f", "parents": [ "b3a33b76db65f64dab0c97b1b09879b91ac9e755" ], "author": { "name": "Sidipotu Ashok", "email": "sashok@codeaurora.org", "time": "Fri Aug 19 09:34:38 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:48 2011 -0700" }, "message": "msm: 7x27a: audio: Driver to use modem side MVS APIs.\n\nDriver to exploit Multimode Vocoder Service(MVS) APIs\nprovided by modem.\n\nSigned-off-by: Sidipotu Ashok \u003csashok@codeaurora.org\u003e\n" }, { "commit": "b3a33b76db65f64dab0c97b1b09879b91ac9e755", "tree": "2bee6435d670ba640926ec03e65c050b86f3af7e", "parents": [ "f4f0f069b9b722f0caef073528633d8a34b6ab46" ], "author": { "name": "Justin Paupore", "email": "jpaupore@codeaurora.org", "time": "Tue Aug 23 15:30:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:48 2011 -0700" }, "message": "msm: Add regulators for 7x27a/PM8029\n\nAdd regulator API support for PM8029 regulators on 7x27a.\n\nSigned-off-by: Justin Paupore \u003cjpaupore@codeaurora.org\u003e\n" }, { "commit": "f4f0f069b9b722f0caef073528633d8a34b6ab46", "tree": "3843771a1e9283a43e4f6a1d18e70d5f7a561888", "parents": [ "ad31c98ed4831693f98e4690520b99f05bd55557" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Mon Aug 29 00:49:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:47 2011 -0700" }, "message": "msm: pmapp: Add vreg_lpm_pincntrl_vote API\n\nAdd voltage regulator pin control LPM API.\n\nCRs-Fixed: 303753\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "ad31c98ed4831693f98e4690520b99f05bd55557", "tree": "f3811a72c4ff7ee7f06f6ab2528786a7009e5388", "parents": [ "2a473b2e26a1140f58619f91d072b5451d3e071d" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Mon Aug 15 23:24:17 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:47 2011 -0700" }, "message": "msm: 8960: adjust mdp perf clock table entries\n\nadds the mdp clock entries based on the current clock scale\nlogic\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "2a473b2e26a1140f58619f91d072b5451d3e071d", "tree": "a3b50d1fbb0994522f4210fbf4cb0f598abda7b3", "parents": [ "01c8631d32fa5c7b3d1aff909fcb6a2cfc59fde4" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Tue Aug 16 15:35:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:46 2011 -0700" }, "message": "msm: timer: Add ifdefs for MSM9615\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "01c8631d32fa5c7b3d1aff909fcb6a2cfc59fde4", "tree": "3c2d9847ce4124046e0c63bb487f34684ee869ad", "parents": [ "99fb6f2ce69cb8739eef9b15baa818a4c93d59d6" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Tue Aug 16 15:25:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:45 2011 -0700" }, "message": "msm: irq: Add irqs file for MSM9615\n\nAdd support for MSM9615 irqs\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "99fb6f2ce69cb8739eef9b15baa818a4c93d59d6", "tree": "6f035c741d889c7b97287221f3d94da2d70f91cc", "parents": [ "fb48637fb75c2ffddafa07231926843d50b7d1fc" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Mon Aug 15 13:37:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:45 2011 -0700" }, "message": "msm: iomap: Add iomap for MSM9615\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "fb48637fb75c2ffddafa07231926843d50b7d1fc", "tree": "4fef14f193b73da2c90456f81563859d43790b65", "parents": [ "21ef2feb1cddfa15f0a88c0838e3c941a84e9c7e" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Fri Sep 02 19:01:49 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:44 2011 -0700" }, "message": "mmc: msm_sdcc: Fix issue with runtime PM resume\n\nDue to the changes introduced in recent commit 68338b, runtime PM\nresume is getting called twice while doing platform resume as below -\n\nmsmsdcc_pm_resume()-\u003emsmsdcc_runtime_resume()-\u003emmc_resume_host()\n-\u003emmc_claim_host()-\u003emsmsdcc_enable()-\u003emsmsdcc_runtime_resume\n\nThis patch fixes this issue by checking the runtime PM state of\nthe device before resuming.\n\nCRs-Fixed: 303742\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "21ef2feb1cddfa15f0a88c0838e3c941a84e9c7e", "tree": "26d04717dac2faeb5d964fad1bbcf2ff07b92812", "parents": [ "521b267ef88f61cc17957d20eb2e075a4dab53ae" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Thu Aug 18 17:12:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:44 2011 -0700" }, "message": "msm_fb: display: use blt mode to implement MDP writeback\n\nMDP frame buffer mode was used to implement writeback for\npulling interface (lcdc and dsi video). However frame buffer\nmode is not recommanded by hardware engineer due to lacking\nof verification. This patch will replace frame buffer mode\nwith BLT mode to implement MDP writeback.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "521b267ef88f61cc17957d20eb2e075a4dab53ae", "tree": "a7cd4388312f6520182e640c0b4e478c7465b531", "parents": [ "073f1221221adb52039bc49f79c81e06335f9c7a" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Fri Sep 02 15:04:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:43 2011 -0700" }, "message": "msm_fb: display: correct both mdp and dsi register address sapce\n\nCurrently both mdp and dsi register address space are set in-correctly.\nIt causes some debugging registers can not be accessed.\nThis patch correct both mdp and dsi register address space.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "073f1221221adb52039bc49f79c81e06335f9c7a", "tree": "3f9bb42e601e2fa99cc1fc54201fd86e65b73d92", "parents": [ "baf6d343ccfaf895a7424ffe54f8cf7bd833797c" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Fri Sep 02 09:44:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:43 2011 -0700" }, "message": "msm_fb: display: Add panel vertical porches into TE logic\n\nPanel vertical porches are not considered into tear check logic\nwhich cause TE can not tolerate panel vsync frequency variation\nafter panel heating up. This cause mdp to hang up and no screen\nupdated after that. This patch will have panel vertical porches\nconsidered in during configure TE registers.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "baf6d343ccfaf895a7424ffe54f8cf7bd833797c", "tree": "b99d53efb8cc589bb0b040f53f82e1cedbcb5e33", "parents": [ "35bb9401304b9291baa61bc3bc068f9f7ee37e70" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Tue Aug 30 21:49:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:42 2011 -0700" }, "message": "msm: clock-local: Make freq_tbl pointer non-const\n\nThere is a need to change freq_tbl at runtime for targets using a\nsimilar clock driver, therefore make the freq_tbl not const to\nsupport such requirement.\n\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n" }, { "commit": "35bb9401304b9291baa61bc3bc068f9f7ee37e70", "tree": "277d5ceafb309625f985ff72f200258555cc10ad", "parents": [ "36448a4aa15f19270d76e50e68f9dfebcecd3e16" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Aug 30 20:03:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:41 2011 -0700" }, "message": "power: msm_charger: log if battery is low\n\nThere can be restarts requested from the userspace if the battery is low.\nIt would be nice to print the low battery capacity in the logs to ease\nthe debugging of such restarts.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "36448a4aa15f19270d76e50e68f9dfebcecd3e16", "tree": "1a37b11dc5d4dcbca8f0583c693a03045dcc4cdf", "parents": [ "96aecfc0335f7f05cdf12905b718b75d25678c02" ], "author": { "name": "Murali Palnati", "email": "palnatim@codeaurora.org", "time": "Fri Sep 02 15:06:18 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:41 2011 -0700" }, "message": "mmc: msm_sdcc: Extend the spin lock to cover all register reads\n\nIn PIO IRQ handler, currently the STATUS and MASK registers are\nread without the host lock being grabbed. Fix this by extending\nthe scope of the lock.\n\nCRs-Fixed: 304791\nSigned-off-by: Murali Palnati \u003cpalnatim@codeaurora.org\u003e\n" }, { "commit": "96aecfc0335f7f05cdf12905b718b75d25678c02", "tree": "dc9c6b21eb3112c45065d4008f91a571ce0a0e79", "parents": [ "3939c8d7246abd08935468c95ef69ec757738c4b" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Thu Jul 28 18:18:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:40 2011 -0700" }, "message": "subsystem-restart: Allow a limited number of restarts in a time interval\n\nSubsystems may crash often enough to render a device unusable or\neven unstable. To avoid such a situation, reboot the entire system\nif a predefined number of subsystem restart sequences occur in a\npredefined interval of time.\n\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "3939c8d7246abd08935468c95ef69ec757738c4b", "tree": "9765df37215f77c87a4ab131f46f143e18c590a6", "parents": [ "9e17253ba2893f1844dc2cb39dd8ed2f65bd285f" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Aug 29 17:36:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:40 2011 -0700" }, "message": "msm: clock-8960: Add support for measuring Q6 clocks\n\nSupport measurement of the Q6 FW, Q6 SW and Q6 LPASS clocks via\nthe q6fw_clk, q6sw_clk and q6_func_clk.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "9e17253ba2893f1844dc2cb39dd8ed2f65bd285f", "tree": "dbfb3b87eb7b7d28a4594108992f45a585e1cfb1", "parents": [ "894fd58ea83d1f1c38269590cfdff6551b872f9e" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 11:42:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:39 2011 -0700" }, "message": "defconfig: Add ion support for 8960 targets\n\nEnable ION for 8960 targets\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "894fd58ea83d1f1c38269590cfdff6551b872f9e", "tree": "58772e8d71cdb9692f24c494c62aec3d921557a9", "parents": [ "d6183793419fa8a88d3e91c2dfa321dc13bf0c6b" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 13:33:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:38 2011 -0700" }, "message": "gpu: ion: Add support for cached and uncached mappings\n\nAdd explicit support for cached and uncached mappings. Functions\nnow describe whether mappings will be cached or uncached.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "d6183793419fa8a88d3e91c2dfa321dc13bf0c6b", "tree": "54c13d60a77fe2a0f35e64a2446043aa2c4def2c", "parents": [ "90b244c3daf65ffe1bb0c5fb585bec79eea2ec4a" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 13:42:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:38 2011 -0700" }, "message": "msm: 8960: Add support for ion heaps\n\nSet up Ion heaps in the board file\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "90b244c3daf65ffe1bb0c5fb585bec79eea2ec4a", "tree": "a9755dce96af0f6d93822aaedd0233318b7f10d5", "parents": [ "09bbcb307dfc1ad299cbe52b2f0b59427ac470ab" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Thu Aug 11 21:38:23 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:37 2011 -0700" }, "message": "ASoC: msm8960: change period size for capture path\n\nFor record path there is data loss if period size is more than\n512 bytes as the encoder fails to encode the last data. Hence reduce\nperiod size to allow smaller buffer size.\n\nCRs-fixed: 297328\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "09bbcb307dfc1ad299cbe52b2f0b59427ac470ab", "tree": "a52581a48c949b643c4212d0f8cf854991ac0d86", "parents": [ "edcbdcced5e8cea0412e9ce251fb0129733d456f" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Tue Aug 30 02:13:26 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:37 2011 -0700" }, "message": "USB: gadget: Add 10 microsec delay before fetching setup_data\n\nUSB hardware sometimes generate interrupt before 8 bytes of\nSETUP packet are written to system memory.\nThis results in wrong setup_data when tried to read immediately\nafter receiving an interrupt.\nAdd a delay of 10 microsec before fetching setup packet to allow\nwrites from hardware to system memory to complete.\n\nCRs-Fixed: 291466\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "edcbdcced5e8cea0412e9ce251fb0129733d456f", "tree": "f35f401fc2814248c6285845441c9f4ccc8755a4", "parents": [ "250557bd4968c5f27a7f1140b72c4d0a86f78172" ], "author": { "name": "Ujwal Patel", "email": "ujwalp@codeaurora.org", "time": "Wed Aug 24 09:14:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:36 2011 -0700" }, "message": "msm: camera: Lens rolloff changes for MSM8960.\n\nMSM8960v1 has mesh based lens rolloff while MSM8960v2 has\nPCA based lens rolloff. Also starting from MSM8960v2 and\nnewer chipsets have double buffered lens rolloff. So adding\nthe run-time lens rolloff update, new config for PCA lens\nrolloff and run-time selection of Mesh or PCA lens rolloff.\n\nSigned-off-by: Ujwal Patel \u003cujwalp@codeaurora.org\u003e\n" }, { "commit": "250557bd4968c5f27a7f1140b72c4d0a86f78172", "tree": "038dd74119c92afbce5d41605a3467f9896a3cbc", "parents": [ "64d003eac3c0531c4d3b4fb9be100a736deee1ea" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Sep 01 12:26:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:36 2011 -0700" }, "message": "msm: 8064: Don\u0027t enable PMIC devices on Rumi\n\nThe PMIC devices are not wired up on the Rumi builds, which\nleads to interrupt storms. Disable these devices on the\nRumi.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-apq8064.c\n" }, { "commit": "64d003eac3c0531c4d3b4fb9be100a736deee1ea", "tree": "c96dc71e53edf6dd94cc521e57a4cb55e5f6313f", "parents": [ "613ab7a16ca58ecda9c5bd4b7ad67ff7a4fd34fd" ], "author": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Tue Aug 30 11:38:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:35 2011 -0700" }, "message": "msm: camera: Remove additional check in msm_queue_drain\n\nRemoved additional check in msm_queue_drain to make\nsure that the list is getting emptied in all cases.\n\nSigned-off-by: Sunid Wilson \u003csunidw@codeaurora.org\u003e\n" }, { "commit": "613ab7a16ca58ecda9c5bd4b7ad67ff7a4fd34fd", "tree": "718c01f5085f274c374b36ee4717c28c2d49d153", "parents": [ "76a1964091d898616f68fc58992462ed46c0becf" ], "author": { "name": "Nishant Pandit", "email": "npandit@codeaurora.org", "time": "Fri Sep 02 03:36:01 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:34 2011 -0700" }, "message": "msm: camera: Change mount angle of sensor\n\nChange mount angle of camera to 90 for Novatek 3D mipi panel\n\nSigned-off-by: Nishant Pandit \u003cnpandit@codeaurora.org\u003e\n" }, { "commit": "76a1964091d898616f68fc58992462ed46c0becf", "tree": "ed396a978f2aa4f407f692dc16ca53ec58b8056c", "parents": [ "a346e2c8bc00fef7cf1114dac067b95100134542" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Sep 01 10:27:03 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:34 2011 -0700" }, "message": "mfd: pmic8058: ack an handled interrupt immediately\n\nCurrently the pmic interrupt thread handles all the interrupts\nand later clears all those interrupts at once.\n\nA problem was observed with this approach. The adc interrupt handler\ncould start another conversion and if the conversion finishes before\nthe pmic interrupt thread clears them, it ends up clearing the new\ninterrupt too.\n\nFix it by clearing the interrupt as soon as the handler is called.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "a346e2c8bc00fef7cf1114dac067b95100134542", "tree": "6f2d949365485a1c1e55d90f72017aabb4af677a", "parents": [ "d267e5c3086e095fe3d21b6d9505bb0a18854227" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Aug 30 18:17:51 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:33 2011 -0700" }, "message": "mfd: pmic8058: avoid unmasking enabled irq\n\nIf an interrupt was already unmasked previously, don\u0027t unmask it\nunnecessarily. This will avoid loosing the interrupt if it were\npending.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "d267e5c3086e095fe3d21b6d9505bb0a18854227", "tree": "940727739fa19ec59eb1d86583618eb606cf581f", "parents": [ "5e91203dfd1bb3dda16c712a4accde6b2040e437" ], "author": { "name": "Jin Hong", "email": "jinh@codeaurora.org", "time": "Thu Aug 25 15:03:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:33 2011 -0700" }, "message": "defconfig: 8960: enable CONFIG_STRICT_MEMORY_RWX\n\nSigned-off-by: Jin Hong \u003cjinh@codeaurora.org\u003e\n" }, { "commit": "5e91203dfd1bb3dda16c712a4accde6b2040e437", "tree": "a4ab23d294c854a868ee480c57689e51aa2f1ad0", "parents": [ "ceea762f4b33c244059f674798527902b0e2168e" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Mon Aug 29 11:15:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:32 2011 -0700" }, "message": "msm_fb: display: wait for vsync and change perf level only if needed\n\nsince overlay_set can be called multiple times to change some\nparameters, there is no need to wait on vsync to change clock for each\ncall to overlay_set unless there is a change in performance level.\n\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "ceea762f4b33c244059f674798527902b0e2168e", "tree": "acb5211166981185619b1dffe86536f357dec5da", "parents": [ "a451049af4e2fccfacbaef82d2075cf683e319e7" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Tue Aug 23 14:01:03 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:31 2011 -0700" }, "message": "msm: camera: Support for Multi planar image formats.\n\nAdd support for multi-planar image formats. This\nallows the luma and chroma planes of the image to\nreside in different memory locations.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "a451049af4e2fccfacbaef82d2075cf683e319e7", "tree": "633f07ad7dccc2c520b97f05d041365e5bbdf6f0", "parents": [ "e1b13f89144c522effe128a6665984e7f26d7c2c" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Mon Aug 29 15:56:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:31 2011 -0700" }, "message": "wcnss: Properly determine when the module param was specified\n\nAcked-by: Jeff Johnson \u003cjjohnson@qca.qualcomm.com\u003e\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "e1b13f89144c522effe128a6665984e7f26d7c2c", "tree": "dff907338eaaf5319ea865ad277bf8a6b225c998", "parents": [ "10976ea87843d3c682b9caac4dc23c131cf46c21" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Tue Aug 30 09:35:49 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:30 2011 -0700" }, "message": "crypto: Fix memory leak\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "10976ea87843d3c682b9caac4dc23c131cf46c21", "tree": "83136b7552f6820aead2c6ca2ac3574341ecfc44", "parents": [ "75d9e5b6e97b0c74fa5f73fe3cfa8f745e7523c5" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Aug 25 11:01:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:30 2011 -0700" }, "message": "mfd: pm8xxx-pwm: fix debug code bugs\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "75d9e5b6e97b0c74fa5f73fe3cfa8f745e7523c5", "tree": "3acf3068cd61d10fd296c2d34634691cce666ae5", "parents": [ "04255ee147b89045f8a54e5fbec37095c74c2200" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Aug 25 10:59:17 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:29 2011 -0700" }, "message": "mfd: pm8xxx-pwm: select higher resolution if possible\n\nMore bits in PWM size means higher resolution, which is preferred\nif we have such choice without sacrificing accuracy.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "04255ee147b89045f8a54e5fbec37095c74c2200", "tree": "267288bd411d7e945a91b3d4cdc99dcd5e3a4195", "parents": [ "15b5b3ec2a58cef0bc576ab442f9cb472eb5841b" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Aug 11 19:45:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:29 2011 -0700" }, "message": "msm: iommu: Add functions to map/unmap an address range\n\nImplement the iommu_map_range / iommu_unmap_range ops in\nthe MSM IOMMU driver.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "15b5b3ec2a58cef0bc576ab442f9cb472eb5841b", "tree": "cb8580158a52df6bf3f262d85976a16337c1c1f3", "parents": [ "0b1345ebd586363a51c7a380fb3e7b3f6d81b445" ], "author": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Thu Aug 11 15:04:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:28 2011 -0700" }, "message": "vidc: venc: Remove check for allocation of sequence buffer size.\n\nFirmware requires non-zero sequence buffer size for H.263.\n\nSigned-off-by: Ashray Kulkarni \u003cashrayk@codeaurora.org\u003e\n" }, { "commit": "0b1345ebd586363a51c7a380fb3e7b3f6d81b445", "tree": "eb9658765242dfb0a58826febf00f88a0dc7fc33", "parents": [ "7a6a34fb26f959fcbad55c9450819d79015a6f2e" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Aug 11 19:32:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:27 2011 -0700" }, "message": "drivers: iommu: Add map/unmap range ops\n\nAdd IOMMU ops functions to allow mapping and unmapping\nwhole ranges of address space based on a scatterlist.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "7a6a34fb26f959fcbad55c9450819d79015a6f2e", "tree": "78d7bd2e16e2e3206462b105759a21bb925c41bb", "parents": [ "30bb6c435a3906b813919cf89ae932c9f3d9966d" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Thu May 19 13:27:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:27 2011 -0700" }, "message": "vidc: 1080p: Override SP profile to ASP for MPEG4 decoding.\n\nAlways set profile to ASP for MPEG4 decoding. Core will\nignore the profile information from the sequence header\nand continue to decode with profile set by driver.\n\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n" }, { "commit": "30bb6c435a3906b813919cf89ae932c9f3d9966d", "tree": "7b0f0d90d066fa961fa8e823e7557c589deb9eb2", "parents": [ "3d321a35703d041a11f25f7abc27cc6c1ef8cd13" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Aug 31 13:02:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:26 2011 -0700" }, "message": "Revert \"8060: wlan: Enable wlan on dragonboard\"\n\nThis reverts commit e0fb57d5ba0dbbb79e2193c4f7bba377bbf25154\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "3d321a35703d041a11f25f7abc27cc6c1ef8cd13", "tree": "8f50edefa4a485dd56b40d5631038f8816a84f4c", "parents": [ "20a9bf2d18b3170d7daca4e35be53726a00e13bd" ], "author": { "name": "Maya Spivak", "email": "mspivak@codeaurora.org", "time": "Fri Jul 08 11:26:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:26 2011 -0700" }, "message": "cpu-hotplug: Add the function \u0027cpu_hotplug_inprogress\u0027\n\nAllows a caller to detect whether a cpu hotplug operation\nis in progress. This is useful for optimizing code paths\nbased on this condition.\n\nSigned-off-by: Maya Spivak \u003cmspivak@codeaurora.org\u003e\n" }, { "commit": "20a9bf2d18b3170d7daca4e35be53726a00e13bd", "tree": "dbadefafaa7349f64fbde770ae2a8da5ebe3f743", "parents": [ "591ea0386000c4248a67bf1bea37d221edef959c" ], "author": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Tue Aug 23 16:02:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:25 2011 -0700" }, "message": "msm: camera: Fix recording state machine bug\n\nVideo frames are sent to the userspace even after stop_recording\nis issued. Fixed the recording state machine to correct this.\n\nSigned-off-by: Sunid Wilson \u003csunidw@codeaurora.org\u003e\n" }, { "commit": "591ea0386000c4248a67bf1bea37d221edef959c", "tree": "2956ad9a72a8eb5c46a58d0ddb09a62d2f687f8d", "parents": [ "9263c210a8ce8dd398ae2c865d1dad7e9d197e45" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Jul 21 16:08:37 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:25 2011 -0700" }, "message": "msm: kgsl: Add idle_stats based pwrscale policy\n\nAdd a pwrscale policy to transmit idle statistics\nto userspace via the MSM idle_stats_device core.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "9263c210a8ce8dd398ae2c865d1dad7e9d197e45", "tree": "ae0c2eb5421df36f7accf08201a1e011295d3ac9", "parents": [ "b4237789514ee9027462b57f1c64e7157b4b6b60" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Wed Aug 31 20:37:45 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:24 2011 -0700" }, "message": "msm: sdio: adding channel cleanup before every test\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "b4237789514ee9027462b57f1c64e7157b4b6b60", "tree": "d60de6b01b2e76d2548fd281c6f803ebb8d518f8", "parents": [ "da06a2c45fc883edabde8c92dec6801c7d2af54b" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Wed Aug 31 20:06:16 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:23 2011 -0700" }, "message": "msm: sdio: fix to close_chan_lpm_test\n\nminimize the logic of close_channel_lpm_test() to open channel and close\nchannel, and the rest of the logic is done in close_chan_lpm_test_write()\nto be consistent with the rest of the tests\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "da06a2c45fc883edabde8c92dec6801c7d2af54b", "tree": "1f6f870f04c0459e2562261d76d8cd8c85e45122", "parents": [ "de4cefb00960665e40b286e84e3d3735307488a2" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Aug 26 17:25:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:23 2011 -0700" }, "message": "defconfig: msm8960: Enable LED Triggers\n\nEnable LED TRIGGERS so can client drivers\nuse triggers to control leds.\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "de4cefb00960665e40b286e84e3d3735307488a2", "tree": "b252958886acd1e1ec5c3652bdbb7f95c0e98fd0", "parents": [ "9a901fd3057954d71bc96a51393727ca1df4b532" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Aug 04 18:10:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:22 2011 -0700" }, "message": "board: msm8960: Add low current LEDs\n\nAdd two low current LEDs with low power\nconfiguration and default trigger\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "9a901fd3057954d71bc96a51393727ca1df4b532", "tree": "d1b13cab90ce9ddf604e6b4c0c45e731163e2451", "parents": [ "9c0bc33d23ab05d7a2e68c0a304012effee70294" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Mon Aug 01 10:07:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:22 2011 -0700" }, "message": "ASoC: WCD9310: Add support for multiple sampling rates\n\nIt is unknown to the codec driver which path will be\nused for a audio stream. To support multiple sample rates,\nadd logic in hw_params to set the sample rates only to\nthe rx/tx paths that are not already active.\n\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "9c0bc33d23ab05d7a2e68c0a304012effee70294", "tree": "490e8f22f0b95efcb8783cec7303dae43383806c", "parents": [ "a2e9363f069768597687ecd3436d331fc3c1ceb1" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Aug 30 14:18:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:21 2011 -0700" }, "message": "msm: camera: Handle more sensor op mode from userspace\n\nRemove error check to handle more sensor op mode apart\nfrom preview and snapshot. Error check is not needed for\nthe switch case because the resolution update should not\nbe done for other op mode.\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "a2e9363f069768597687ecd3436d331fc3c1ceb1", "tree": "22b410b0a8c19f51c28da6b84b809de3c0043b44", "parents": [ "302911d5ba5cdb2ed344e0156e10bfba5e1248e1" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 13:36:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:21 2011 -0700" }, "message": "gpu: ion: Add support for carveout heaps on msm targets\n\nAdd infrastructure for supporting ion carveout heaps.\nThe memory type should be specified in the board file using\nmach/ion.h. The ion platform driver will be responsible for\nallocating the correct memory.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "302911d5ba5cdb2ed344e0156e10bfba5e1248e1", "tree": "7668dfac798813fd32464060fcb76b10078b8699", "parents": [ "c46636308ea645b5e555955f3679bea6a01001a8" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Aug 15 17:12:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:20 2011 -0700" }, "message": "gpu: ion: Add platform driver for msm ion\n\nAdd platform driver for msm specific ion devices\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "c46636308ea645b5e555955f3679bea6a01001a8", "tree": "c84f0ae9fc0f05ef87e0941c7fbf25b34ee525a0", "parents": [ "8fef09a792fe01ec564d09a2b0b29d2bfa55fd21" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Wed Aug 31 19:55:38 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:19 2011 -0700" }, "message": "msm: sdio: fix a bug in sdio_close() in case of jiffies wraparound\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "8fef09a792fe01ec564d09a2b0b29d2bfa55fd21", "tree": "db6b63b659a3a5e19aa84720588703b862131d48", "parents": [ "07ef788243461ff0aa60766f13d39bef3e5969a1" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Tue Aug 09 17:36:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:19 2011 -0700" }, "message": "msm_fb: display: Remove histogram memcpy from MDP Interrupt handler\n\nCRs-Fixed: 300666\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "07ef788243461ff0aa60766f13d39bef3e5969a1", "tree": "56bed1e54ea0eaf5bbf2b976b9d6ba750a09547a", "parents": [ "2c07eb5f7112e7c3f977f8911e42a8934aedf5ae" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Tue Aug 09 15:50:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:18 2011 -0700" }, "message": "msm: display: Add MDP version support for 7x27, 8x50, 7x30 targets\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-qrdc.c\n\tarch/arm/mach-msm/board-qt8660.c\n" }, { "commit": "2c07eb5f7112e7c3f977f8911e42a8934aedf5ae", "tree": "b28f1d9f4ed1cbaafd5bdf855c0edca7042f6bb0", "parents": [ "844b1c87139193c473b0b31ccb2e37e13cbc34f6" ], "author": { "name": "Neema Shetty", "email": "nshetty@codeaurora.org", "time": "Sun Aug 21 20:33:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:18 2011 -0700" }, "message": "ASoC: msm: Add support for multiple instance.\n\nAdd support for concurrent voice and VoIP calls.\n\nSigned-off-by: Neema Shetty \u003cnshetty@codeaurora.org\u003e\n" }, { "commit": "844b1c87139193c473b0b31ccb2e37e13cbc34f6", "tree": "3ca954cf62d6531da6dce64e34c037c6861ea045", "parents": [ "b3fc78c25c49e5395f2e59cca5ec0d74408406dd" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Mon Aug 29 15:26:06 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:17 2011 -0700" }, "message": "msm: kgsl: IRQ must be off after _stop is called\n\nringbuffer_stop \u0026 mmu_stop will turn on the IRQ handler.\nTurn it off after they are called.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "b3fc78c25c49e5395f2e59cca5ec0d74408406dd", "tree": "022c73aac34a174f348c640779b1db344e4beaa4", "parents": [ "5578bdb65df40de60c47f87be1f62a2ea332e973" ], "author": { "name": "Chandra Devireddy", "email": "cdevired@codeaurora.org", "time": "Tue Aug 30 17:25:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:16 2011 -0700" }, "message": "USB: msm72k_otg: disable BAM mode\n\nIn BAM mode, USB core does posted writes on AHB bus, when it moves\nthe received setup packet to the memory. This might lead HW to fail in\ncopying the setup packet into the memory, before software reads. This\nleads data corruption in setup packet and might lead USB re-enumeration.\n\nIf we don\u0027t use BAM mode for USB, then we should explicitly disable\nthe USB BAM mode by setting bit-13 of USB_GEN_CONFIG register. This\nwould prevent posted writes and resolves the above issue.\n\nSigned-off-by: Chandra Devireddy \u003ccdevired@codeaurora.org\u003e\n" }, { "commit": "5578bdb65df40de60c47f87be1f62a2ea332e973", "tree": "4c679ef2ae6875959946b733b789c63aa9beb851", "parents": [ "d783499ad3e5835568711cfcc009994e1db00a81" ], "author": { "name": "Joel Nider", "email": "jnider@codeaurora.org", "time": "Fri Aug 12 09:37:11 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:16 2011 -0700" }, "message": "tsif: tsif1 initialization bug fix\n\nWhen using CONFIG_MSM_USE_TSIF1 to enable the second tsif instance,\nthe device initialization failed because of a errant device ID. The\ncheck has been updated to accept the correct device ID range (0..1)\n\nSigned-off-by: Joel Nider \u003cjnider@codeaurora.org\u003e\n" }, { "commit": "d783499ad3e5835568711cfcc009994e1db00a81", "tree": "cad65f7d23d41e1dd2b5365f1b70ea448839f3e0", "parents": [ "bd6a49a2a0106be24d3be34b7e8dbe8cc6f5c1a0" ], "author": { "name": "Ankit Verma", "email": "ankitv@codeaurora.org", "time": "Mon Aug 22 12:29:33 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:15 2011 -0700" }, "message": "mfd: marimba: Return proper error when marimba read/write fails.\n\nReturn proper error when marimba read/write fails.\n\nCRs-Fixed: 295515\nSigned-off-by: Ankit Verma \u003cankitv@codeaurora.org\u003e\n" }, { "commit": "bd6a49a2a0106be24d3be34b7e8dbe8cc6f5c1a0", "tree": "4c48e6a28f7a368d30bd69f5a238af85ab37deaa", "parents": [ "e35585d0b981110b2486b2cc08a741ae50a0f49e" ], "author": { "name": "Inga Stotland", "email": "ingas@codeaurora.org", "time": "Tue Aug 23 16:13:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:15 2011 -0700" }, "message": "Bluetooth: Handle disconnect for LE links.\n\nAdditional check whether the disconnect request is\ncoming on LE link.\n\nSigned-off-by: Inga Stotland \u003cingas@codeaurora.org\u003e\n" }, { "commit": "e35585d0b981110b2486b2cc08a741ae50a0f49e", "tree": "0a528bfeeca3d6076b2a26d464d0aedeb40bb729", "parents": [ "70a8e7d29dc43c298568be6c4720510b073f412c" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Aug 17 20:04:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:14 2011 -0700" }, "message": "msm: irq-vic: Add INT_ADSP_A11 interrupt for fsm9xxx\n\nAdded INT_ADSP_A11 irq entry into msm_irq_to_smsm[]\nfor the fsm9xxx targets.\n\nAcked-by: Kaushik Sikdar \u003cksikdar@qualcomm.com\u003e\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "70a8e7d29dc43c298568be6c4720510b073f412c", "tree": "e621791d44b0362b079b0074d36ec4939b1163d2", "parents": [ "1efef08e36674ee28b00e14e524b809a6aa85ee0" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Fri Sep 02 14:29:18 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:14 2011 -0700" }, "message": "msm_serial_hs_lite: Set UART Clock rate to zero, only when it is disable\n\nUART Core clock set rate is getting called before actually disabling uart\ncore clock. This problem has been seen with console suspend due to setting\nclock rate to zero from msm_hsl_power api. This change makes sure that uart\ncore clock is actually disabled before it is set to zero.\n\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "1efef08e36674ee28b00e14e524b809a6aa85ee0", "tree": "48c5f49ad7bb2c19456d604979368c945641229c", "parents": [ "67141e301b814c98970df8a4219549c0e54a03ed" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Wed Jul 13 13:02:38 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:13 2011 -0700" }, "message": "msm: sdio_cmux: fix corner case in back to back probes\n\nIf back to back probes occur because of subsystem restart, and\nsdio_open() fails multiple times, sdio_cmux_probe() could attempt to\nre-free an already freed workqueue, causing a kernel panic.\n\nThe cmux workqueues should not be freed once allocated and the driver\ngoes into the initialized state. Change the error handling to correct\nthat.\n\nCRs-Fixed: 295466\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "67141e301b814c98970df8a4219549c0e54a03ed", "tree": "6566f54e2e01c8a7050abfa82336689bd21faf67", "parents": [ "0e027b77a82df024f8ba819f685989e8c684e6c8" ], "author": { "name": "Jeffrey Chuang", "email": "fchuang@codeaurora.org", "time": "Tue Aug 30 17:14:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:12 2011 -0700" }, "message": "Revert \"Revert \"msm: 8960: WCNSS restart module, removed Watchdog bite IRQ\"\"\n\nThis reverts commit c9ff2208b2db905923dbb358bfb93ff8782ffc2c.\n\nSigned-off-by: Jeffrey Chuang \u003cfchuang@codeaurora.org\u003e\n" }, { "commit": "0e027b77a82df024f8ba819f685989e8c684e6c8", "tree": "64bb953476abc3fa483537fcc58ab7ce79911627", "parents": [ "87bda5a4b2e9a2f211b7ab990a9d6f9bfb39524e" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Tue Aug 30 17:40:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:12 2011 -0700" }, "message": "Revert \"msm: msm_sdcc: Add DDR support for eMMC/MMC\"\n\nThis reverts commit 279aa8dd1dd7dabcb655d7f78c5304f3533b4d41.\n\nCRs-Fixed: 300095\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "87bda5a4b2e9a2f211b7ab990a9d6f9bfb39524e", "tree": "a94bb27e65665cdb07f2c24e2c9a413570bb40fa", "parents": [ "078c9e3a9aa5f0fbf57f7b5a273f11306c0cd370" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Tue Aug 30 17:40:44 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:11 2011 -0700" }, "message": "Revert \"msm: 8960: increase the drive strength for SDC1 DATA \u0026 CMD lines\"\n\nThis reverts commit a138437ccc9a27775a56f42f39d8d8a8e23d4c0f.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "078c9e3a9aa5f0fbf57f7b5a273f11306c0cd370", "tree": "14fefa3e8b82398b06e3f87a1021d1f0853c7963", "parents": [ "fe7abc088b52d20b47b84737bad0517acfd8a551" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Aug 29 19:33:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:11 2011 -0700" }, "message": "msm: clock-8960: Don\u0027t disable QDSS AT clock at boot\n\nDisabling the AT clock at boot time causes suspend power collapse\nto fail the second time. Don\u0027t turn off the clock so that power\ncollapse keeps working.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "fe7abc088b52d20b47b84737bad0517acfd8a551", "tree": "eabedff9ed24311d3f3abd3fbe4ec76f5da89cda", "parents": [ "9559ee42d03855217bd884d814a643f85faa1c6d" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Tue Aug 09 13:27:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:10 2011 -0700" }, "message": "mm camera: Add pmem vaddr mapping in HAL\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "9559ee42d03855217bd884d814a643f85faa1c6d", "tree": "1eb2719da3daceeb14bc2b20bd2aa5c2da13f5c8", "parents": [ "8487f71cd28338e6ed4346397006d52c90e36ef1" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Tue Aug 09 11:54:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:10 2011 -0700" }, "message": "msm camera: separate daemon pmem mapping away from video node\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "8487f71cd28338e6ed4346397006d52c90e36ef1", "tree": "bd456d521c10284fc70441aa272d23fe9f2f5b62", "parents": [ "5d697e1dee12f61a669f5d628cfbc21ec75752b5" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Aug 29 12:10:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:09 2011 -0700" }, "message": "msm: clock-8960: Bump up rotator max freq to 200Mhz\n\nThe rotator clock supports up to 200Mhz at nominal voltage.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "5d697e1dee12f61a669f5d628cfbc21ec75752b5", "tree": "91ef358c0c26bf0cf9d12f3c695db7a0eeeedaac", "parents": [ "396562a31615c4e9af91decc1c168ac67447a73e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 24 19:36:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:08 2011 -0700" }, "message": "power: pm8921-charger: remove efficiency improvements\n\nWriting 0x8C to 0x209 makes the pmic charging efficient but causes\na voltage to appear on usb after it is removed. This makes the\nphone never detect usb removal. Remove writing 0x8C to 0x209.\n\nAlso remove writing 0xF1 to 0x209. This was thought to be helping\nwith the issue, but it did not help.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "396562a31615c4e9af91decc1c168ac67447a73e", "tree": "b2ae7f7e5d654b38e4d38dad8ea234b9b65bc1f5", "parents": [ "f389606af78f0a8a32c32d9f4a0124afbc1d6a1f" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Thu Aug 25 11:39:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:08 2011 -0700" }, "message": "usb: gsmd: Free usb ep req if req staus is cable disconnection\n\nUSB ep request is being added to the list and being freed later\nw/o deleting from the list when usb cable is disonnected. This\nis causing memory corruption and kernel panic in other function\ndrivers. Fix the issue by not adding the request to list during\ncable disconnection\n\nCRs-Fixed: 301905\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "f389606af78f0a8a32c32d9f4a0124afbc1d6a1f", "tree": "3e32e639fb453aabce20cb418198ae86498ed171", "parents": [ "0a8ad170516c9610d2c2781839ab97c6ec79fb04" ], "author": { "name": "Sushmita Susheelendra", "email": "ssusheel@codeaurora.org", "time": "Fri Aug 12 16:33:10 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:07 2011 -0700" }, "message": "msm: kgsl: Record missing memory writes to the cff dump\n\nThe buffers memstore and dummyspace were being memset\nbefore memory for them was allocated and mapped.\nkgsl_cff_parse_ibs should record the write instead\nof returning upon encoutering a hostaddr with no\nphysical addr.\nWrites to GMEM were not being recorded. Adding\nthe mem syncs for that\n\nSigned-off-by: Sushmita Susheelendra \u003cssusheel@codeaurora.org\u003e\n" }, { "commit": "0a8ad170516c9610d2c2781839ab97c6ec79fb04", "tree": "a170be3dd628c43d1b5820ba6d9504bb1d9bbf86", "parents": [ "636585de21a6c57b89b355e76007487e8050aab9" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri Aug 12 13:32:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:07 2011 -0700" }, "message": "ASoC: WCD9310: Enable Lineout 5\n\nCRs-Fixed: 298249\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "636585de21a6c57b89b355e76007487e8050aab9", "tree": "64f91334cdcb6c0c23332317ed12a5721a6e6bd3", "parents": [ "0fda560b27f6a816419cee3741f13565768ca8fc" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 18 16:14:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:06 2011 -0700" }, "message": "mfd: pm8xxx-irq: get rid of using chained handler\n\nThe chained handler bypasses the flow handlers, which are essential\nin managing the interrupts while they are disabled or suspended.\n\nRemove the usage of chained handlers and switch to using action handlers.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/pm8xxx-irq.c\n" }, { "commit": "0fda560b27f6a816419cee3741f13565768ca8fc", "tree": "937b674b0ba2a70a60d9eee4e76f85b43c3a6424", "parents": [ "fb136486969a4ee3eec388c5f7c115383547c2db" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 17 18:00:55 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:06 2011 -0700" }, "message": "msm: board-msm8960:remove PM8921_MPP_IRQ_BASE\n\nThere is no need to track where the PM8921_MPP_IRQ_BASE starts.\nClean up this code. Consequently clean up the start of SX150X\ninterrupts. They should start after the pmic interrupts.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "fb136486969a4ee3eec388c5f7c115383547c2db", "tree": "578474da4fca4690fe79f98cc82f7b1d0509027d", "parents": [ "ef955cdb8d537686cd5eb57dc203c07056e3d894" ], "author": { "name": "Ashwin Chaugule", "email": "ashwinc@codeaurora.org", "time": "Fri Aug 12 16:15:33 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:05 2011 -0700" }, "message": "ARM: Perfevents: Remove erroneous constraint on number of active events\n\nThe original intent was to restrict the number of active events to number\nof available counters at init. But this code had the side effect of events\nneedelessly reserving a slot even when they couldn\u0027t be armed on the PMU.\n\nEventually this resource reservation code will be replaced entirely.\nFor now, we lazily deny event allocation just before arming them on\nthe PMU.\n\nSigned-off-by: Ashwin Chaugule \u003cashwinc@codeaurora.org\u003e\n" }, { "commit": "ef955cdb8d537686cd5eb57dc203c07056e3d894", "tree": "88a4d5720a685cc3e6abc277d0b4900955123796", "parents": [ "63215126dc0cd0e14d5acbdcfc4dc03dfb3e2a41" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Thu Aug 25 17:11:00 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:04 2011 -0700" }, "message": "ASoC: msm8960: Remove EOS command while closing session.\n\nAt time of pcm_close session is already drained.\nHence no need for EOS command while closing operation as it\nadds unnecessary delay.\n\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "63215126dc0cd0e14d5acbdcfc4dc03dfb3e2a41", "tree": "0beeb72dbbc124e6511bac568ffb93c24eaf0dff", "parents": [ "293217d6c2f649838ec82f251d929dc59316e3fc" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Aug 25 14:43:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:04 2011 -0700" }, "message": "msm: charm: Wait for status to go low in panic handler\n\nWhen a panic occurs in the kernel, the external modem\nresponds and goes through its own shutdown process.\nWait until the external modem gives a signal that\nit has finished shutting down (dropping MDM2AP_STATUS)\nbefore exiting the panic handler.\n\nCRs-Fixed: 303416\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "293217d6c2f649838ec82f251d929dc59316e3fc", "tree": "f7a24801e66da6fd1b6109330669f39e1075cfa1", "parents": [ "1d17cf51b5592669a550c83d6974d325b66247b3" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Aug 19 17:50:52 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:03 2011 -0700" }, "message": "msm: kgsl: New low power level\n\nSaves ~8ma at battery for low fps apps.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "1d17cf51b5592669a550c83d6974d325b66247b3", "tree": "b396272208c096496974faefcd2476a36b4f0217", "parents": [ "41f8fa330664879217c2fef2dd373446c9c650ca" ], "author": { "name": "Justin Paupore", "email": "jpaupore@codeaurora.org", "time": "Tue Aug 16 15:39:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:03 2011 -0700" }, "message": "regulator: Add regulator_bulk_set_voltage\n\nAdd a convenience API to set the voltage on multiple consumers\nstored in a struct regulator_bulk_data[] in one API call.\n\nSigned-off-by: Justin Paupore \u003cjpaupore@codeaurora.org\u003e\n" }, { "commit": "41f8fa330664879217c2fef2dd373446c9c650ca", "tree": "a284daa9b13276f41256e098c62433656a74eb53", "parents": [ "e0b55321970acbdefdeb5d2eff76ffd1b87861af" ], "author": { "name": "Sushmita Susheelendra", "email": "ssusheel@codeaurora.org", "time": "Wed May 11 17:15:58 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:02 2011 -0700" }, "message": "msm: kgsl: Add CFF user event ioctl to write data to cff dumps\n\nAdd the ioctl IOCTL_KGSL_CFF_USER_EVENT to write data to cff dump.\nDefine a new CFF packet cff_op_user_event for this generic user\nevent.\nWrite the surface parameter data packet and verify mem file\npacket to cff dumps\n\nSigned-off-by: Sushmita Susheelendra \u003cssusheel@codeaurora.org\u003e\n" }, { "commit": "e0b55321970acbdefdeb5d2eff76ffd1b87861af", "tree": "0b332dbe68884dda21907e32ca5a2632337f0494", "parents": [ "33dc7b93d4fd73307bb8f68f8067cbe481c5bbcb" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Tue Aug 23 10:54:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:02 2011 -0700" }, "message": "msm: audio: qdsp6v2: Wait indefinitely for subsystems to be loaded.\n\nWait indefinitely for lpass or modem to be loaded instead of waiting\nfor a timeout of 5secs. The reason being downloading of images might\ntake long time.\n\nCRs-fixed: 302002\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "33dc7b93d4fd73307bb8f68f8067cbe481c5bbcb", "tree": "62ff029fe47c0d19703c4b2648acae537c262dfa", "parents": [ "0e8a5ade33956340ae5afd604d042f39a7fc1237" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Thu Aug 18 16:16:12 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:01 2011 -0700" }, "message": "msm_fb: display: fix YCrCb planar input format support in mdp\n\nMDP hardware expects source addresses to be in YCbCr order, in order to\nsupport YCrCb, need to swap chroma planes addresses.\n\nCRs-Fixed: 302408\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "0e8a5ade33956340ae5afd604d042f39a7fc1237", "tree": "573179a69178fa517403117d77d73e7866b768fe", "parents": [ "8b621e42799c3427c5080b9f9458e0b445dd05f5" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Mon Aug 29 10:32:43 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:00 2011 -0700" }, "message": "msm: sdio: creating a debugfs tree of nodes for testing purposes\n\nunder sys/kernel/debug/sdio_al_test directory there will be all files,\nthat by writing to them, the spesific test will be executed.\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "8b621e42799c3427c5080b9f9458e0b445dd05f5", "tree": "3c2bbf17fa68570d4b7b1342c17d735f8ed501bb", "parents": [ "a0101bac77ed3deb50291801211178d0fa4294b0" ], "author": { "name": "Praveena Pachipulusu", "email": "pveena@codeaurora.org", "time": "Wed Aug 10 18:17:07 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:00 2011 -0700" }, "message": "input: cyttsp-i2c: Change the permission of firmware sysfs entries\n\nCRs-fixed: 302911\nSigned-off-by: Praveena Pachipulusu \u003cpveena@codeaurora.org\u003e\n" }, { "commit": "a0101bac77ed3deb50291801211178d0fa4294b0", "tree": "3178a69784a229b0160399d0d3f7f7a7b5daa094", "parents": [ "7cf018e8124b8fce44cd4ef3d31de42d604c5e1f" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Thu Aug 11 20:05:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:59 2011 -0700" }, "message": "ASoC: msm8960: Enable physical digital mics 4,5 and 6\n\nDigital Mic 4 and 5 are applicable to FLUID, MTP and CDP\nwhereas Digital Mic 6 is present only on CDP. Add audio map\nfor these mics assuming FLUID as the default device.\n\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "7cf018e8124b8fce44cd4ef3d31de42d604c5e1f", "tree": "9b0024991d0440ff026bf8165ea5054a2ef3c241", "parents": [ "e31d133d4c581b3dc13b8073dc36e55a0598843a" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Thu Aug 11 18:58:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:59 2011 -0700" }, "message": "ASoC: WCD9310: Enable digital mic 4,5 and 6 inputs\n\nEnable the codec input lines for digital mic 4,5 and 6.\n\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "e31d133d4c581b3dc13b8073dc36e55a0598843a", "tree": "7854432e29c3d0e973379fe42461d7be16c49a9c", "parents": [ "0a0fe6a2a6bf9496373d73545b81a1f063399b6c" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed Aug 24 17:12:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:58 2011 -0700" }, "message": "msm: charm: Wake up the external modem when panicking\n\nIn order for the external modem to properly respond to\na panic, it must be out of low power mode. Ensure the\nexternal modem is woken up before leaving the panic\nhandler.\n\nCRs-Fixed: 303416\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "0a0fe6a2a6bf9496373d73545b81a1f063399b6c", "tree": "11a659ca471a0af066c83ec5549d23c63243c8a8", "parents": [ "24161a643a3d3c491922871e4053bdae05f7cd09" ], "author": { "name": "Rajeshwar Kurapaty", "email": "rkurapat@codeaurora.org", "time": "Tue Aug 23 18:57:58 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:58 2011 -0700" }, "message": "vidc: 720p: Handle profile unknown as bitstream error.\n\nFor corrupted VOL header in the middle of playback\ncore is returning UNKNOWN PROFILE error and is being\ntreated as Fatal error and playback is getting aborted.\nNow handling it as sequence header fail/recoverable\nerror.\n\nCRs-Fixed: 302549\nSigned-off-by: Rajeshwar Kurapaty \u003crkurapat@codeaurora.org\u003e\n" }, { "commit": "24161a643a3d3c491922871e4053bdae05f7cd09", "tree": "61aa159a95c5f0cca987a75c94297dc46b8b9f69", "parents": [ "60c9b4b05e80b5528b1220c6cdc71a54d8880f09" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Sun Aug 28 18:18:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:57 2011 -0700" }, "message": "Revert \"msm: 8960: WCNSS restart module, removed Watchdog bite IRQ\"\n\nThis reverts commit 895293124ddd122607221e908e99f150bc074c2d.\n\nSigned-off-by: Bryan Huntsman \u003cbryanh@codeaurora.org\u003e\n" } ], "next": "60c9b4b05e80b5528b1220c6cdc71a54d8880f09" }