)]}' { "log": [ { "commit": "910a7e905f36e51a17d6e8bb4ad6dcd5ac5f1d53", "tree": "63587b03de37a6b9a6b58c203719a24d57edf850", "parents": [ "d6523ddf2376f39eaa89a4d68a33052d20c138b9" ], "author": { "name": "Eric W. Biederman", "email": "ebiederm@xmission.com", "time": "Tue May 04 17:36:46 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:32 2010 -0700" }, "message": "netlink: Implment netlink_broadcast_filtered\n\nWhen netlink sockets are used to convey data that is in a namespace\nwe need a way to select a subset of the listening sockets to deliver\nthe packet to. For the network namespace we have been doing this\nby only transmitting packets in the correct network namespace.\n\nFor data belonging to other namespaces netlink_bradcast_filtered\nprovides a mechanism that allows us to examine the destination\nsocket and to decide if we should transmit the specified packet\nto it.\n\nSigned-off-by: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "608b4b9548dedf4185ca47edcaae4bff2ceb62de", "tree": "6855a119e99a4e0142c17b8cc4aa08968f3f6ab6", "parents": [ "07e98962fa778b9782c8845dfcb06a84cc050744" ], "author": { "name": "Eric W. Biederman", "email": "ebiederm@xmission.com", "time": "Tue May 04 17:36:45 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:32 2010 -0700" }, "message": "netns: Teach network device kobjects which namespace they are in.\n\nThe problem. Network devices show up in sysfs and with the network\nnamespace active multiple devices with the same name can show up in\nthe same directory, ouch!\n\nTo avoid that problem and allow existing applications in network namespaces\nto see the same interface that is currently presented in sysfs, this\npatch enables the tagging directory support in sysfs.\n\nBy using the network namespace pointers as tags to separate out the\nthe sysfs directory entries we ensure that we don\u0027t have conflicts\nin the directories and applications only see a limited set of\nthe network devices.\n\nSigned-off-by: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "2c3c8bea608866d8bd9dcf92657d57fdcac011c5", "tree": "f509b958d0a65c46c831dbdd447a81e706dd995a", "parents": [ "68d75ed4b84a0806ecd4bc14da4759713b23a532" ], "author": { "name": "Chris Wright", "email": "chrisw@sous-sol.org", "time": "Wed May 12 18:28:57 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:31 2010 -0700" }, "message": "sysfs: add struct file* to bin_attr callbacks\n\nThis allows bin_attr-\u003eread,write,mmap callbacks to check file specific data\n(such as inode owner) as part of any privilege validation.\n\nSigned-off-by: Chris Wright \u003cchrisw@sous-sol.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "27eabc7cb4b357c68e4ce77d0b014f7a23add752", "tree": "f3042a750946c495e8fcbefa526a7c665ccdc197", "parents": [ "b9d8b45ee3c5f62cdbd34ee006f3dd2ac51f7018" ], "author": { "name": "Eric W. Biederman", "email": "ebiederm@xmission.com", "time": "Wed May 05 14:54:00 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:31 2010 -0700" }, "message": "sysfs: Don\u0027t use enums in inline function declaration.\n\nIt appears gcc can\u0027t cope with using an enum that is only declared in\nan inline function declaration, that doesn\u0027t even use the variable\nthat is so declared.\n\nAvoid the silliness and replace the enum with an int, and make gcc\nhappy.\n\nSigned-off-by: Eric W. Biederman \u003cebiederm@aristanetworks.com\u003e\nAcked-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "be867b194a3ae3c680c29521287ae49b4d44d420", "tree": "1b3ad125d02603c6a9cc4bb8ae518695d7c6a66d", "parents": [ "f349cf34731c3b3eddbcd63cb04489aee2c405bd" ], "author": { "name": "Serge E. Hallyn", "email": "serue@us.ibm.com", "time": "Mon May 03 16:23:15 2010 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:31 2010 -0700" }, "message": "sysfs: Comment sysfs directory tagging logic\n\nAdd some in-line comments to explain the new infrastructure, which\nwas introduced to support sysfs directory tagging with namespaces.\nI think an overall description someplace might be good too, but it\ndidn\u0027t really seem to fit into Documentation/filesystems/sysfs.txt,\nwhich appears more geared toward users, rather than maintainers, of\nsysfs.\n\n(Tejun, please let me know if I can make anything clearer or failed\naltogether to comment something that should be commented.)\n\nSigned-off-by: Serge E. Hallyn \u003cserue@us.ibm.com\u003e\nCc: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nCc: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "746edb7ae8a1abdd39be2b28c03aa073183340db", "tree": "6e2bbfd8f42c11c95a4f63623a96317eb00efe77", "parents": [ "af10ec77b43335ab4e473e4087d85979caf02d65" ], "author": { "name": "Eric W. Biederman", "email": "ebiederm@xmission.com", "time": "Tue Mar 30 11:31:28 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:31 2010 -0700" }, "message": "sysfs: Implement sysfs_delete_link\n\nWhen removing a symlink sysfs_remove_link does not provide\nenough information to figure out which tagged directory the symlink\nfalls in. So I need sysfs_delete_link which is passed the target\nof the symlink to delete.\n\nsysfs_rename_link is updated to call sysfs_delete_link instead\nof sysfs_remove_link as we have all of the information necessary\nand the callers are interesting.\n\nBoth of these functions now have enough information to find a symlink\nin a tagged directory. The only restriction is that they must be called\nbefore the target kobject is renamed or deleted. If they are called\nlater I loose track of which tag the target kobject was marked with\nand can no longer find the old symlink to remove it.\n\nThis patch was split from an earlier patch.\n\nSigned-off-by: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nSigned-off-by: Benjamin Thery \u003cbenjamin.thery@bull.net\u003e\nSigned-off-by: Daniel Lezcano \u003cdlezcano@fr.ibm.com\u003e\nAcked-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "3ff195b011d7decf501a4d55aeed312731094796", "tree": "8cfdc330abbf82893955f2d7d6e96efee81bfd7c", "parents": [ "bc451f2058238013e1cdf4acd443c01734d332f0" ], "author": { "name": "Eric W. Biederman", "email": "ebiederm@xmission.com", "time": "Tue Mar 30 11:31:26 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:31 2010 -0700" }, "message": "sysfs: Implement sysfs tagged directory support.\n\nThe problem. When implementing a network namespace I need to be able\nto have multiple network devices with the same name. Currently this\nis a problem for /sys/class/net/*, /sys/devices/virtual/net/*, and\npotentially a few other directories of the form /sys/ ... /net/*.\n\nWhat this patch does is to add an additional tag field to the\nsysfs dirent structure. For directories that should show different\ncontents depending on the context such as /sys/class/net/, and\n/sys/devices/virtual/net/ this tag field is used to specify the\ncontext in which those directories should be visible. Effectively\nthis is the same as creating multiple distinct directories with\nthe same name but internally to sysfs the result is nicer.\n\nI am calling the concept of a single directory that looks like multiple\ndirectories all at the same path in the filesystem tagged directories.\n\nFor the networking namespace the set of directories whose contents I need\nto filter with tags can depend on the presence or absence of hotplug\nhardware or which modules are currently loaded. Which means I need\na simple race free way to setup those directories as tagged.\n\nTo achieve a reace free design all tagged directories are created\nand managed by sysfs itself.\n\nUsers of this interface:\n- define a type in the sysfs_tag_type enumeration.\n- call sysfs_register_ns_types with the type and it\u0027s operations\n- sysfs_exit_ns when an individual tag is no longer valid\n\n- Implement mount_ns() which returns the ns of the calling process\n so we can attach it to a sysfs superblock.\n- Implement ktype.namespace() which returns the ns of a syfs kobject.\n\nEverything else is left up to sysfs and the driver layer.\n\nFor the network namespace mount_ns and namespace() are essentially\none line functions, and look to remain that.\n\nTags are currently represented a const void * pointers as that is\nboth generic, prevides enough information for equality comparisons,\nand is trivial to create for current users, as it is just the\nexisting namespace pointer.\n\nThe work needed in sysfs is more extensive. At each directory\nor symlink creating I need to check if the directory it is being\ncreated in is a tagged directory and if so generate the appropriate\ntag to place on the sysfs_dirent. Likewise at each symlink or\ndirectory removal I need to check if the sysfs directory it is\nbeing removed from is a tagged directory and if so figure out\nwhich tag goes along with the name I am deleting.\n\nCurrently only directories which hold kobjects, and\nsymlinks are supported. There is not enough information\nin the current file attribute interfaces to give us anything\nto discriminate on which makes it useless, and there are\nno potential users which makes it an uninteresting problem\nto solve.\n\nSigned-off-by: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nSigned-off-by: Benjamin Thery \u003cbenjamin.thery@bull.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "bc451f2058238013e1cdf4acd443c01734d332f0", "tree": "16a1ca2f762edcfbda8f2a4afb6763ba7b090271", "parents": [ "ba514a57f5c38d9d79ea15e75059e07f49238726" ], "author": { "name": "Eric W. Biederman", "email": "ebiederm@xmission.com", "time": "Tue Mar 30 11:31:25 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:31 2010 -0700" }, "message": "kobj: Add basic infrastructure for dealing with namespaces.\n\nMove complete knowledge of namespaces into the kobject layer\nso we can use that information when reporting kobjects to\nuserspace.\n\nSigned-off-by: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "1704f47b50b5d9e1b825e43e1baaf2c5897baf03", "tree": "60617ff867624f915f75a502f2207de5e586757a", "parents": [ "3142788b7967ccfd2f1813ee9e11aeb1e1cf7de2" ], "author": { "name": "Peter Zijlstra", "email": "peterz@infradead.org", "time": "Fri Mar 19 01:37:42 2010 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:30 2010 -0700" }, "message": "lockdep: Add novalidate class for dev-\u003emutex conversion\n\nThe conversion of device-\u003esem to device-\u003emutex resulted in lockdep\nwarnings. Create a novalidate class for now until the driver folks\ncome up with separate classes. That way we have at least the basic\nmutex debugging coverage.\n\nAdd a checkpatch error so the usage is reserved for device-\u003emutex.\n\n[ tglx: checkpatch and compile fix for LOCKDEP\u003dn ]\n\nSigned-off-by: Peter Zijlstra \u003cpeterz@infradead.org\u003e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "3142788b7967ccfd2f1813ee9e11aeb1e1cf7de2", "tree": "292a6e3a21e237789c91a8d0ccd021321990a265", "parents": [ "190e8370b8033f746db5289e9324174564a6f5a7" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Fri Jan 29 20:39:02 2010 +0000" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:30 2010 -0700" }, "message": "drivers/base: Convert dev-\u003esem to mutex\n\nThe semaphore is semantically a mutex. Convert it to a real mutex and\nfix up a few places where code was relying on semaphore.h to be included\nby device.h, as well as the users of the trylock function, as that value\nis now reversed.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "da5e4ef7fdb8f2fb0878dee3bd9d4dd10cea8cf1", "tree": "172df2771cbfbb8501aaf6e04c34b4fc1b3c7cca", "parents": [ "1653268b1b538981df9bb85d637456530938be6c" ], "author": { "name": "Peter Korsgaard", "email": "jacmet@sunsite.dk", "time": "Tue Mar 16 21:55:21 2010 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:30 2010 -0700" }, "message": "devtmpfs: support !CONFIG_TMPFS\n\nMake devtmpfs available on (embedded) configurations without SHMEM/TMPFS,\nusing ramfs instead.\n\nSaves ~15KB.\n\nSigned-off-by: Peter Korsgaard \u003cjacmet@sunsite.dk\u003e\nAcked-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "db1afffab0b5d9f6d31f8f4bea44c9cb3bc59351", "tree": "5ba8fd7a5018c0772d999b8c3aa945c0efb929e0", "parents": [ "dd336c554d8926c3348a2d5f2a5ef5597f6d1a06" ], "author": { "name": "NeilBrown", "email": "neilb@suse.de", "time": "Tue Mar 16 15:14:51 2010 +1100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:29 2010 -0700" }, "message": "kref: remove kref_set\n\nOf the three uses of kref_set in the kernel:\n\n One really should be kref_put as the code is letting go of a\n reference,\n Two really should be kref_init because the kref is being\n initialised.\n\nThis suggests that making kref_set available encourages bad code.\nSo fix the three uses and remove kref_set completely.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nAcked-by: Mimi Zohar \u003czohar@us.ibm.com\u003e\nAcked-by: Serge Hallyn \u003cserue@us.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "dd336c554d8926c3348a2d5f2a5ef5597f6d1a06", "tree": "457178c0d3189d6c3e02922aca36e528f4fc50a9", "parents": [ "cdc6e3d3968052cebb2f2ddcd742bff29fbd1a90" ], "author": { "name": "David Woodhouse", "email": "David.Woodhouse@intel.com", "time": "Sun May 02 11:21:21 2010 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri May 21 09:37:28 2010 -0700" }, "message": "firmware_class: fix memory leak - free allocated pages\n\nfix memory leak introduced by the patch 6e03a201bbe:\nfirmware: speed up request_firmware()\n\n1. vfree won\u0027t release pages there were allocated explicitly and mapped\nusing vmap. The memory has to be vunmap-ed and the pages needs\nto be freed explicitly\n\n2. page array is moved into the \u0027struct\nfirmware\u0027 so that we can free it from release_firmware()\nand not only in fw_dev_release()\n\nThe fix doesn\u0027t break the firmware load speed.\n\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Ming Lei \u003ctom.leiming@gmail.com\u003e\nCc: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nSinged-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: David Woodhouse \u003cDavid.Woodhouse@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "d7dbf4ffee1c7a17e2e5b5f01efe76fbd1671db6", "tree": "2f4eda25c0c9eb6de1e573dba92b4d23fc383db5", "parents": [ "677abe49ad017679627af9d3bbd9a7ecb3d94c42", "d240e06713007bba309b074a386b7072b73c31a6" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 21 07:47:00 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 21 07:47:00 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (23 commits)\n nilfs2: disallow remount of snapshot from/to a regular mount\n nilfs2: use huge_encode_dev/huge_decode_dev\n nilfs2: update comment on deactivate_super at nilfs_get_sb\n nilfs2: replace MS_VERBOSE with MS_SILENT\n nilfs2: add missing initialization of s_mode\n nilfs2: fix misuse of open_bdev_exclusive/close_bdev_exclusive\n nilfs2: enlarge s_volume_name member in nilfs_super_block\n nilfs2: use checkpoint number instead of timestamp to select super block\n nilfs2: add missing endian conversion on super block magic number\n nilfs2: make nilfs_sc_*_ops static\n nilfs2: add kernel doc comments to persistent object allocator functions\n nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info\n nilfs2: remove nilfs_segctor_init() in segment.c\n nilfs2: insert checkpoint number in segment summary header\n nilfs2: add a print message after loading nilfs2\n nilfs2: cleanup multi kmem_cache_{create,destroy} code\n nilfs2: move out checksum routines to segment buffer code\n nilfs2: move pointer to super root block into logs\n nilfs2: change default of \u0027errors\u0027 mount option to \u0027remount-ro\u0027 mode\n nilfs2: Combine nilfs_btree_release_path() and nilfs_btree_free_path()\n ...\n" }, { "commit": "05ec7dd8dd5aa42c22a49682e4a51cadd4166b7e", "tree": "6370b43c0d8f324aa7421bbb5a647aa04ab5d747", "parents": [ "c316ba3b518bc35ce5aef5421135220389f4eb98", "8046112818b70329e930b1d4557ef0876c1ad2bb" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 21 07:25:43 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 21 07:25:43 2010 -0700" }, "message": "Merge git://git.infradead.org/mtd-2.6\n\n* git://git.infradead.org/mtd-2.6: (154 commits)\n mtd: cfi_cmdset_0002: use AMD standard command-set with Winbond flash chips\n mtd: cfi_cmdset_0002: Fix MODULE_ALIAS and linkage for new 0701 commandset ID\n mtd: mxc_nand: Remove duplicate NAND_CMD_RESET case value\n mtd: update gfp/slab.h includes\n jffs2: Stop triggering block erases from jffs2_write_super()\n jffs2: Rename jffs2_erase_pending_trigger() to jffs2_dirty_trigger()\n jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erases\n jffs2: Require jffs2_garbage_collect_trigger() to be called with lock held\n jffs2: Wake GC thread when there are blocks to be erased\n jffs2: Erase pending blocks in GC pass, avoid invalid -EIO return\n jffs2: Add \u0027work_done\u0027 return value from jffs2_erase_pending_blocks()\n mtd: mtdchar: Do not corrupt backing device of device node inode\n mtd/maps/pcmciamtd: Fix printk format for ssize_t in debug messages\n drivers/mtd: Use kmemdup\n mtd: cfi_cmdset_0002: Fix argument order in bootloc warning\n mtd: nand: add Toshiba TC58NVG0 device ID\n pcmciamtd: add another ID\n pcmciamtd: coding style cleanups\n pcmciamtd: fixing obvious errors\n mtd: chips: add SST39WF160x NOR-flashes\n ...\n\nTrivial conflicts due to dev_node removal in drivers/mtd/maps/pcmciamtd.c\n" }, { "commit": "33cf23b0a535475aead57707cb9f4fe135a93544", "tree": "67e14f77f0eeab847a26a6cbfcb44eecb5fa2fda", "parents": [ "7a9b149212f3716c598afe973b6261fd58453b7a", "95bb335c0ebe96afe926387a1ef3a096bd884a82" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 21 07:19:18 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 21 07:19:18 2010 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits)\n [SCSI] aacraid: add an ifdef\u0027d device delete case instead of taking the device offline\n [SCSI] aacraid: prohibit access to array container space\n [SCSI] aacraid: add support for handling ATA pass-through commands.\n [SCSI] aacraid: expose physical devices for models with newer firmware\n [SCSI] aacraid: respond automatically to volumes added by config tool\n [SCSI] fcoe: fix fcoe module ref counting\n [SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn\n [SCSI] libfcoe: Fix incorrect MAC address clearing\n [SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex\n [SCSI] libfc: Move the port_id into lport\n [SCSI] fcoe: move link speed checking into its own routine\n [SCSI] libfc: Remove extra pointer check\n [SCSI] libfc: Remove unused fc_get_host_port_type\n [SCSI] fcoe: fixes wrong error exit in fcoe_create\n [SCSI] libfc: set seq_id for incoming sequence\n [SCSI] qla2xxx: Updates to ISP82xx support.\n [SCSI] qla2xxx: Optionally disable target reset.\n [SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive\n [SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did.\n [SCSI] qla2xxx: T10 DIF support added.\n ...\n" }, { "commit": "7a9b149212f3716c598afe973b6261fd58453b7a", "tree": "477716d84c71da124448b72278e98da28aadbd3d", "parents": [ "3d62e3fdce8ef265a3706c52ae1ca6ab84e30f0e", "e26bcf37234c67624f62d9fc95f922b8dbda1363" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 21:26:12 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 21:26:12 2010 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits)\n USB: remove unused usb_buffer_alloc and usb_buffer_free macros\n usb: musb: update gfp/slab.h includes\n USB: ftdi_sio: fix legacy SIO-device header\n USB: kl5usb105: reimplement using generic framework\n USB: kl5usb105: minor clean ups\n USB: kl5usb105: fix memory leak\n USB: io_ti: use kfifo to implement write buffering\n USB: io_ti: remove unsused private counter\n USB: ti_usb: use kfifo to implement write buffering\n USB: ir-usb: fix incorrect write-buffer length\n USB: aircable: fix incorrect write-buffer length\n USB: safe_serial: straighten out read processing\n USB: safe_serial: reimplement read using generic framework\n USB: safe_serial: reimplement write using generic framework\n usb-storage: always print quirks\n USB: usb-storage: trivial debug improvements\n USB: oti6858: use port write fifo\n USB: oti6858: use kfifo to implement write buffering\n USB: cypress_m8: use kfifo to implement write buffering\n USB: cypress_m8: remove unused drain define\n ...\n\nFix up conflicts (due to usb_buffer_alloc/free renaming) in\n\tdrivers/input/tablet/acecad.c\n\tdrivers/input/tablet/kbtab.c\n\tdrivers/input/tablet/wacom_sys.c\n\tdrivers/media/video/gspca/gspca.c\n\tsound/usb/usbaudio.c\n" }, { "commit": "f8965467f366fd18f01feafb5db10512d7b4422c", "tree": "3706a9cd779859271ca61b85c63a1bc3f82d626e", "parents": [ "a26272e5200765691e67d6780e52b32498fdb659", "2ec8c6bb5d8f3a62a79f463525054bae1e3d4487" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 21:04:44 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 21:04:44 2010 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)\n qlcnic: adding co maintainer\n ixgbe: add support for active DA cables\n ixgbe: dcb, do not tag tc_prio_control frames\n ixgbe: fix ixgbe_tx_is_paused logic\n ixgbe: always enable vlan strip/insert when DCB is enabled\n ixgbe: remove some redundant code in setting FCoE FIP filter\n ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp\n ixgbe: fix header len when unsplit packet overflows to data buffer\n ipv6: Never schedule DAD timer on dead address\n ipv6: Use POSTDAD state\n ipv6: Use state_lock to protect ifa state\n ipv6: Replace inet6_ifaddr-\u003edead with state\n cxgb4: notify upper drivers if the device is already up when they load\n cxgb4: keep interrupts available when the ports are brought down\n cxgb4: fix initial addition of MAC address\n cnic: Return SPQ credit to bnx2x after ring setup and shutdown.\n cnic: Convert cnic_local_flags to atomic ops.\n can: Fix SJA1000 command register writes on SMP systems\n bridge: fix build for CONFIG_SYSFS disabled\n ARCNET: Limit com20020 PCI ID matches for SOHARD cards\n ...\n\nFix up various conflicts with pcmcia tree drivers/net/\n{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and\nwireless/orinoco/spectrum_cs.c} and feature removal\n(Documentation/feature-removal-schedule.txt).\n\nAlso fix a non-content conflict due to pm_qos_requirement getting\nrenamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c\n" }, { "commit": "7c6d87ac843bfbc5a7669736882a0e88c217a820", "tree": "b757687fcc7493a322c5c27aa141c87668900234", "parents": [ "a0fe3cc5d36a5f5b4f60abfe1a4b1caf4a5cce5a", "ec66841e495b9ab4f92bdf91efe8cf56e1471fbd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 13:34:17 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 13:34:17 2010 -0700" }, "message": "Merge branch \u0027viafb-next\u0027 of git://git.lwn.net/linux-2.6\n\n* \u0027viafb-next\u0027 of git://git.lwn.net/linux-2.6: (35 commits)\n viafb: move some include files to include/linux\n viafb: Eliminate some global.h references\n viafb: get rid of i2c debug cruft\n viafb: fold via_io.h into via-core.h\n viafb: Fix initialization error paths\n viafb: Do not remove gpiochip under spinlock\n viafb: make procfs entries optional\n viafb: fix proc entry removal\n viafb: improve misc register handling\n viafb: replace inb/outb\n viafb: move some modesetting functions to a seperate file\n viafb: unify modesetting functions\n viafb: Reserve framebuffer memory for the upcoming camera driver\n viafb: Add a simple VX855 DMA engine driver\n viafb: Add a simple interrupt management infrastructure\n via: Rationalize vt1636 detection\n viafb: Introduce viafb_find_i2c_adapter()\n via: Do not attempt I/O on inactive I2C adapters\n viafb: Turn GPIO and i2c into proper platform devices\n viafb: Convert GPIO and i2c to the new indexed port ops\n ...\n" }, { "commit": "e26bcf37234c67624f62d9fc95f922b8dbda1363", "tree": "d81be298b9a5b22c5157ee02f3af1925f895af96", "parents": [ "c4d80b7d5220a65cc4e26173d99d4750895f3e64" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Apr 29 15:46:07 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:50 2010 -0700" }, "message": "USB: remove unused usb_buffer_alloc and usb_buffer_free macros\n\nNow that all callers are converted over, remove the compatibility\nfunctions and all is good.\n\nCc: Daniel Mack \u003cdaniel@caiaq.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "0858a3a52f659dabf2860f350e5a6a61f069e851", "tree": "cec27991ece5515676d10ea2bc19d6d237cbab36", "parents": [ "812219ab8facf07b94e4b3fe81e9cd3fe4129777" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon May 17 10:58:12 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:47 2010 -0700" }, "message": "USB: include/usb/*.h checkpatch cleanup\n\nLots of minor formatting cleanups in includes/usb/ to make checkpatch\nhappier.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "812219ab8facf07b94e4b3fe81e9cd3fe4129777", "tree": "e7bbdc24a3e6a6c8c9d2bd5343d29883d5189b2f", "parents": [ "aa84dfc4296b8dd296da9a4d9e19ec1e6f7ddb94" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon May 17 10:40:55 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:47 2010 -0700" }, "message": "USB: usb.h: checkpatch cleanups\n\nMinor formatting changes to clean up the file.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "22b4b6113ec5d0ff2a9175bc611f3f3f61e4e172", "tree": "5226f05128912ed10db3a334864d07170be1955b", "parents": [ "b9e000884e50bf6b25a92a3f3580e1d14fe01591" ], "author": { "name": "Ming Lei", "email": "tom.leiming@gmail.com", "time": "Wed May 12 23:38:46 2010 +0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:45 2010 -0700" }, "message": "USB: remove usb_find_device\n\nNow on one uses this function and it seems useless,\nso remove usb_find_device.\n\n[tom@tom linux-2.6-next]$ grep -r -n -I usb_find_device ./\ndrivers/media/dvb/dvb-usb/dvb-usb-init.c:160:static struct\ndvb_usb_device_description * dvb_usb_find_device(struct usb_device\n*udev,struct dvb_usb_device_properties *props, int *cold)\n\ndrivers/media/dvb/dvb-usb/dvb-usb-init.c:230: if ((desc \u003d\ndvb_usb_find_device(udev,props,\u0026cold)) \u003d\u003d NULL) {\n\ndrivers/usb/core/usb.c:630: * usb_find_device - find a specific usb device in the system\ndrivers/usb/core/usb.c:642:struct usb_device *usb_find_device(u16 vendor_id, u16 product_id)\n\nSigned-off-by: Ming Lei \u003ctom.leiming@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "ddf8abd2599491cbad959c700b90ba72a5dce8d0", "tree": "d04cf8348f36c4a65af77190658ba87a4480cd50", "parents": [ "28824b18ac4705e876a282a15ea0de8fc957551f" ], "author": { "name": "Michal Nazarewicz", "email": "m.nazarewicz@samsung.com", "time": "Wed May 05 12:53:14 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:43 2010 -0700" }, "message": "USB: f_fs: the FunctionFS driver\n\nThe FunctionFS is a USB composite function that can be used\nwith the composite framework to create an USB gadget.\n\n\u003eFrom kernel point of view it is just a composite function with\nsome unique behaviour. It may be added to an USB\nconfiguration only after the user space driver has registered\nby writing descriptors and strings (the user space program has\nto provide the same information that kernel level composite\nfunctions provide when they are added to the configuration).\n\n\u003eFrom user space point of view it is a file system which when\nmounted provide an \"ep0\" file. User space driver need to\nwrite descriptors and strings to that file. It does not need\nto worry about endpoints, interfaces or strings numbers but\nsimply provide descriptors such as if the function was the\nonly one (endpoints and strings numbers starting from one and\ninterface numbers starting from core). The FunctionFS changes\nnumbers of those as needed also handling situation when\nnumbers differ in different configurations.\n\nWhen descriptors and strings are written \"ep#\" files appear\n(one for each declared endpoint) which handle communication on\na single endpoint. Again, FunctionFS takes care of the real\nnumbers and changing of the configuration (which means that\n\"ep1\" file may be really mapped to (say) endpoint 3 (and when\nconfiguration changes to (say) endpoint 2)). \"ep0\" is used\nfor receiving events and handling setup requests.\n\nWhen all files are closed the function disables itself.\n\nSigned-off-by: Michal Nazarewicz \u003cm.nazarewicz@samsung.com\u003e\nCc: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nCc: Marek Szyprowski \u003cm.szyprowski@samsung.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "22c43c81a51e05f61e90445ceb59d486c12fd921", "tree": "88582f01bf413bdc4d9d95a512116c9fe44afa33", "parents": [ "24337c133ff92ba8d7c42819db17f7f2b0de3129" ], "author": { "name": "Michal Nazarewicz", "email": "m.nazarewicz@samsung.com", "time": "Wed May 05 12:53:11 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:42 2010 -0700" }, "message": "wait_event_interruptible_locked() interface\n\nNew wait_event_interruptible{,_exclusive}_locked{,_irq} macros added.\nThey work just like versions without _locked* suffix but require the\nwait queue\u0027s lock to be held. Also __wake_up_locked() is now exported\nas to pair it with the above macros.\n\nThe use case of this new facility is when one uses wait queue\u0027s lock\nto protect a data structure. This may be advantageous if the\nstructure needs to be protected by a spinlock anyway. In particular,\nwith additional spinlock the following code has to be used to wait\nfor a condition:\n\nspin_lock(\u0026data.lock);\n...\nfor (ret \u003d 0; !ret \u0026\u0026 !(condition); ) {\n\tspin_unlock(\u0026data.lock);\n\tret \u003d wait_event_interruptible(data.wqh, (condition));\n\tspin_lock(\u0026data.lock);\n}\n...\nspin_unlock(\u0026data.lock);\n\nThis looks bizarre plus wait_event_interruptible() locks the wait\nqueue\u0027s lock anyway so there is a unlock+lock sequence where it could\nbe avoided.\n\nTo avoid those problems and benefit from wait queue\u0027s lock, a code\nsimilar to the following should be used:\n\n/* Waiting */\nspin_lock(\u0026data.wqh.lock);\n...\nret \u003d wait_event_interruptible_locked(data.wqh, (condition));\n...\nspin_unlock(\u0026data.wqh.lock);\n\n/* Waiting exclusively */\nspin_lock(\u0026data.whq.lock);\n...\nret \u003d wait_event_interruptible_exclusive_locked(data.whq, (condition));\n...\nspin_unlock(\u0026data.whq.lock);\n\n/* Waking up */\nspin_lock(\u0026data.wqh.lock);\n...\nwake_up_locked(\u0026data.wqh);\n...\nspin_unlock(\u0026data.wqh.lock);\n\nWhen spin_lock_irq() is used matching versions of macros need to be\nused (*_locked_irq()).\n\nSigned-off-by: Michal Nazarewicz \u003cm.nazarewicz@samsung.com\u003e\nCc: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nCc: Marek Szyprowski \u003cm.szyprowski@samsung.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Takashi Iwai \u003ctiwai@suse.de\u003e\nCc: David Howells \u003cdhowells@redhat.com\u003e\nCc: Andreas Herrmann \u003candreas.herrmann3@amd.com\u003e\nCc: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Mike Galbraith \u003cefault@gmx.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "c23e5fc1f7dba228558b4a46e68f7af89515b13c", "tree": "add71b10dc2275c98d3439fe3756829c2ec0afc9", "parents": [ "27c7acf22047fbe4ec4cc36b7c2610dba227697c" ], "author": { "name": "Johan Hovold", "email": "jhovold@gmail.com", "time": "Wed May 05 23:58:13 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:42 2010 -0700" }, "message": "USB: serial: remove multi-urb write from generic driver\n\nRemove multi-urb write from the generic driver and simplify the\nprepare_write_buffer prototype:\n\n\tint (*prepare_write_buffer)(struct usb_serial_port *port,\n\t\t\t\t\t\tvoid *dest, size_t size);\n\nThe default implementation simply fills dest with data from port write\nfifo but drivers can override it if they need to process the outgoing\ndata (e.g. add headers).\n\nTurn ftdi_sio into a generic fifo-based driver, which lowers CPU usage\nsignificantly for small writes while retaining maximum throughput.\n\nSigned-off-by: Johan Hovold \u003cjhovold@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "27c7acf22047fbe4ec4cc36b7c2610dba227697c", "tree": "c0a8f217fc2d7a302b4d2e084bb126e825006ca4", "parents": [ "4272568b3dd8dbad36014a107c0fbbef6400c917" ], "author": { "name": "Johan Hovold", "email": "jhovold@gmail.com", "time": "Wed May 05 23:57:37 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:42 2010 -0700" }, "message": "USB: serial: reimplement generic fifo-based writes\n\nReimplement fifo-based writes in the generic driver using a multiple\npre-allocated urb scheme.\n\nIn contrast to multi-urb writes, no allocations (of urbs or buffers) are\nmade during run-time and there is less pressure on the host stack\nqueues as currently only two urbs are used (implementation is generic\nand can handle more than two urbs as well, though).\n\nInitial tests using ftdi_sio show that the implementation achieves the\nsame (maximum) throughput at high baudrates as multi-urb writes. The CPU\nusage is much lower than for multi-urb writes for small write requests\nand only slightly higher for large (e.g. 2k) requests (due to extra copy\nvia fifo?).\n\nAlso outperforms multi-urb writes for small write requests on an\nembedded arm-9 system, where multi-urb writes are CPU-bound at high\nbaudrates (perf reveals that a lot of time is spent in the host stack\nenqueue function -- could perhaps be a bug as well).\n\nKeeping the original write_urb, buffer and flag for now as there are\nother drivers depending on them.\n\nSigned-off-by: Johan Hovold \u003cjhovold@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "0ba169aff9181389f30f225ad92e113eeb2290b9", "tree": "50dc210826805224c8b2941dfcfbf55ffb4e3c02", "parents": [ "a9914127e834acf648a96c72b4e271dc0c1c7c74" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Wed May 05 15:26:17 2010 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:42 2010 -0700" }, "message": "USB: simplify usb_sg_init()\n\nThis patch (as1377) simplifies the code in usb_sg_init(), without\nchanging its functionality. It also removes a couple of unused fields\nfrom the usb_sg_request structure.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "910f8d0cede74beff1eee93cf9cf2a28d7600e66", "tree": "663cd91c3d4ca2a71937b0dcaad51b02cae3c9c6", "parents": [ "1e429018b646bdf903554e92ead1cda96cc552dc" ], "author": { "name": "Matthew Wilcox", "email": "matthew@wil.cx", "time": "Sat May 01 12:20:01 2010 -0600" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:41 2010 -0700" }, "message": "USB: Change the scatterlist type in struct urb\n\nChange the type of the URB\u0027s \u0027sg\u0027 pointer from a usb_sg_request to\na scatterlist. This allows drivers to submit scatter-gather lists\nwithout using the usb_sg_wait() interface. It has the added benefit\nof removing the typecasts that were added as part of patch as1368 (and\nslightly decreasing the number of pointer dereferences).\n\nSigned-off-by: Matthew Wilcox \u003cwilly@linux.intel.com\u003e\nReviewed-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nTested-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "1e429018b646bdf903554e92ead1cda96cc552dc", "tree": "e57fdbc9e823d5b06659ceae6ce9850c6ab3be91", "parents": [ "fe54b058de9d1df5fef9e2a559651f4b7c9f04b1" ], "author": { "name": "Matthew Wilcox", "email": "willy@linux.intel.com", "time": "Fri Apr 30 13:11:30 2010 -0600" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:41 2010 -0700" }, "message": "USB: Turn interface_to_usbdev into an inline function\n\nThe stronger type-checking would have prevented a bug I had.\n\nSigned-off-by: Matthew Wilcox \u003cwilly@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "fe54b058de9d1df5fef9e2a559651f4b7c9f04b1", "tree": "9ed1f427416478e8832f5ca67c17bd8433a87630", "parents": [ "b18a23495fd4492081a61373fc3ef9f5c59e094a" ], "author": { "name": "Matthew Wilcox", "email": "willy@linux.intel.com", "time": "Fri Apr 30 13:11:29 2010 -0600" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:41 2010 -0700" }, "message": "USB: Add a usb_pipe_endpoint() convenience function\n\nConverting a pipe number to a struct usb_host_endpoint pointer is a little\nmessy. Introduce a new convenience function to hide the mess.\n\nSigned-off-by: Matthew Wilcox \u003cwilly@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "b18a23495fd4492081a61373fc3ef9f5c59e094a", "tree": "b5f1b173266a91f522c587eeee1cb24647e83af4", "parents": [ "6641445c3e05460c5164ab15a17fc4ee481ca213" ], "author": { "name": "Matthew Wilcox", "email": "willy@linux.intel.com", "time": "Fri Apr 30 13:11:28 2010 -0600" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:41 2010 -0700" }, "message": "USB: Add definition for the Pipe Usage descriptor\n\nThe Pipe Usage descriptor is needed for USB Attached SCSI\n\nSigned-off-by: Matthew Wilcox \u003cwilly@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "85bcb5ee889e0ebb9154718939e049de265fcdfb", "tree": "daeec28274c8b68fea502c41af84d45d2681ebc5", "parents": [ "842f16905dfc6743c1dd80c3d29b49ba3ab7f7c8" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Fri Apr 30 16:35:37 2010 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:40 2010 -0700" }, "message": "USB: remove URB_NO_SETUP_DMA_MAP\n\nNow that URB_NO_SETUP_DMA_MAP is no longer in use, this patch (as1376)\nremoves all references to it.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "842f16905dfc6743c1dd80c3d29b49ba3ab7f7c8", "tree": "2d193389359d78580b1652325bb83e57a59e77fa", "parents": [ "3b02ca3218cf878e206545041aa811073e4f6c79" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Fri Apr 30 12:44:46 2010 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:40 2010 -0700" }, "message": "USB: remove the usb_host_ss_ep_comp structure\n\nThis patch (as1375) eliminates the usb_host_ss_ep_comp structure used\nfor storing a dynamically-allocated copy of the SuperSpeed endpoint\ncompanion descriptor. The SuperSpeed descriptor is placed directly in\nthe usb_host_endpoint structure, alongside the standard endpoint\ndescriptor.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Sarah Sharp \u003csarah.a.sharp@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "3b02ca3218cf878e206545041aa811073e4f6c79", "tree": "079757cdb134a5ae7bba75ad8a863a622c4b7fd2", "parents": [ "beb7b04a09a9da8b12417f7b74fbcceedb087fc3" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Fri Apr 30 12:42:23 2010 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:40 2010 -0700" }, "message": "USB: export the new ch11.h file to userspce\n\nThis patch (as1374) cleans up a few loose ends in the\ninclude/linux/usb/ch11.h header file and exports it to userspace.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nCc: Eric Lescouet \u003cEric.Lescouet@virtuallogix.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "f48cf80f93ba974eb3201ab2d0f2c4cef950f3fc", "tree": "a90ec04a891d1698110372791d01a03d90c6da3f", "parents": [ "326b4810cc995209e31136af4202ed0414814ed5" ], "author": { "name": "Fabien Chouteau", "email": "fabien.chouteau@barco.com", "time": "Fri Apr 23 14:21:26 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:39 2010 -0700" }, "message": "USB: Composite framework: Add suspended sysfs entry\n\nThis patch adds a sysfs entry (/sys/devices/platform/_UDC_/gadget/suspended) to\nshow the suspend state of an USB composite gadget.\n\nSigned-off-by: Fabien Chouteau \u003cfabien.chouteau@barco.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "65e0b499105ec8ff3bc4ab7680873dec20127f9d", "tree": "69c178f0585ad100d32bb7b81cebffb4b0bbb83d", "parents": [ "01154aa714240a9be12a0ed69b047e53d258f5b1" ], "author": { "name": "Yauheni Kaliuta", "email": "yauheni.kaliuta@nokia.com", "time": "Fri Apr 16 16:13:35 2010 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:39 2010 -0700" }, "message": "USB: ncm: added ncm.h with auxiliary definitions\n\nSigned-off-by: Yauheni Kaliuta \u003cyauheni.kaliuta@nokia.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "01154aa714240a9be12a0ed69b047e53d258f5b1", "tree": "51b80ba7ab47b34744291b55668a8ccca492cb07", "parents": [ "9ff68c7ad8910426495be36e2b568ac623adc226" ], "author": { "name": "Yauheni Kaliuta", "email": "yauheni.kaliuta@nokia.com", "time": "Fri Apr 16 16:13:34 2010 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:39 2010 -0700" }, "message": "usb: cdc: ncm constants and structures added\n\nSigned-off-by: Yauheni Kaliuta \u003cyauheni.kaliuta@nokia.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "eab1cafc3b524b714b0567ab98fc75ace09db98c", "tree": "854ed5c4cba741efabec933714dac5c68bcbb452", "parents": [ "e9df17eb1408cfafa3d1844bfc7f22c7237b31b8" ], "author": { "name": "Sarah Sharp", "email": "sarah.a.sharp@linux.intel.com", "time": "Mon Apr 05 10:55:58 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:38 2010 -0700" }, "message": "USB: Support for allocating USB 3.0 streams.\n\nBulk endpoint streams were added in the USB 3.0 specification. Streams\nallow a device driver to overload a bulk endpoint so that multiple\ntransfers can be queued at once.\n\nThe device then decides which transfer it wants to work on first, and can\nqueue part of a transfer before it switches to a new stream. All this\nswitching is invisible to the device driver, which just gets a completion\nfor the URB. Drivers that use streams must be able to handle URBs\ncompleting in a different order than they were submitted to the endpoint.\n\nThis requires adding new API to set up xHCI data structures to support\nmultiple queues (\"stream rings\") per endpoint. Drivers will allocate a\nnumber of stream IDs before enqueueing URBs to the bulk endpoints of the\ndevice, and free the stream IDs in their disconnect function. See\nDocumentation/usb/bulk-streams.txt for details.\n\nThe new mass storage device class, USB Attached SCSI Protocol (UASP), uses\nthese streams API.\n\nSigned-off-by: Sarah Sharp \u003csarah.a.sharp@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "94af1220985c71cd80d6c161b7a42c51ef08b923", "tree": "0256344a21dd26880146a9cad88c3ec19182d155", "parents": [ "22ad1e7f86e1fb96488d71512e2797153a6ad839" ], "author": { "name": "Sarah Sharp", "email": "sarah.a.sharp@linux.intel.com", "time": "Fri Apr 02 15:34:10 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:37 2010 -0700" }, "message": "USB: Add stream ID field to struct urb.\n\nBulk endpoint streams were added in the USB 3.0 specification. Streams\nallow a device driver to overload a bulk endpoint so that multiple\ntransfers can be queued at once.\n\nAdd a new field, stream_id, to struct urb so that USB 3.0 drivers can\nspecify which stream they want the URB to be queued to.\n\nSigned-off-by: Sarah Sharp \u003csarah.a.sharp@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "22ad1e7f86e1fb96488d71512e2797153a6ad839", "tree": "5e2b35287d9a03664e9b4aac64c3e7f5a3173469", "parents": [ "e07896e62abbf7a741a5cd5b25ba7637bdf91ad0" ], "author": { "name": "Sarah Sharp", "email": "sarah.a.sharp@linux.intel.com", "time": "Fri Apr 02 15:33:56 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:37 2010 -0700" }, "message": "USB: Add parsing of SuperSpeed endpoint companion descriptor.\n\nAllow the xHCI drivers (and any new USB 3.0 drivers) to parse the\nSuperSpeed endpoint companion descriptor to find the maximum number of\nbulk endpoint streams the endpoint supports. This is used to calculate\nthe maximum total number of streams the driver can allocate.\n\nSigned-off-by: Sarah Sharp \u003csarah.a.sharp@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "9e18c821659d836bd63f88df3c19729327728496", "tree": "4148e58d0e03aecfe0dbeedd175bc960006570a9", "parents": [ "7aba8d014341341590ecb64050b7a026642a62eb" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Fri Apr 02 13:22:09 2010 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:37 2010 -0700" }, "message": "USB: use PM core routines to enable/disable autosuspend\n\nThis patch (as1366) replaces the private routines\nusb_enable_autosuspend() and usb_disable_autosuspend() with calls to\nthe standard pm_runtime_allow() and pm_runtime_forbid() functions in\nthe runtime PM framework. They do the same thing.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "ff9c895f07d36193c75533bda8193bde8ca99d02", "tree": "386ca8e37734c4810e59a55eaba92e4e88275d14", "parents": [ "0ff8d1b3c858ea7c8daa54f7577971a76d04d283" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Fri Apr 02 13:27:28 2010 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:37 2010 -0700" }, "message": "USB: fix usbmon and DMA mapping for scatter-gather URBs\n\nThis patch (as1368) fixes a rather obscure bug in usbmon: When tracing\nURBs sent by the scatter-gather library, it accesses the data buffers\nwhile they are still mapped for DMA.\n\nThe solution is to move the mapping and unmapping out of the s-g\nlibrary and into the usual place in hcd.c. This requires the addition\nof new URB flag bits to describe the kind of mapping needed, since we\nhave to call dma_map_sg() if the HCD supports native scatter-gather\noperation and dma_map_page() if it doesn\u0027t. The nice thing about\nhaving the new flags is that they simplify the testing for unmapping.\n\nThe patch removes the only caller of usb_buffer_[un]map_sg(), so those\nfunctions are #if\u0027ed out. A later patch will remove them entirely.\n\nAs a result of this change, urb-\u003esg will be set in situations where\nit wasn\u0027t set previously. Hence the xhci and whci drivers are\nadjusted to test urb-\u003enum_sgs instead, which retains its original\nmeaning and is nonzero only when the HCD has to handle a scatterlist.\n\nFinally, even when a submission error occurs we don\u0027t want to hand\nURBs to usbmon before they are unmapped. The submission path is\nrearranged so that map_urb_for_dma() is called only for non-root-hub\nURBs and unmap_urb_for_dma() is called immediately after a submission\nerror. This simplifies the error handling.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nCC: \u003cstable@kernel.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "3a229eb13984a2950ee47fb827c8ed1d654b9d68", "tree": "33c12dc014ae7b741e0c2d851bf7763ef71ee627", "parents": [ "0fb2c2a1692b8f77be25d38f8802b0142cb6e6bc" ], "author": { "name": "Heikki Krogerus", "email": "ext-heikki.krogerus@nokia.com", "time": "Mon May 03 09:13:01 2010 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:36 2010 -0700" }, "message": "usb: otg: add global ULPI register definitions\n\nDefinitions for registers defined by ULPI specification v1.1.\n\nSigned-off-by: Heikki Krogerus \u003cext-heikki.krogerus@nokia.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "71adf118946957839a13aa4d1094183e05c6c094", "tree": "b99d1113b8a36da96fc7b498b2cea39fcc440914", "parents": [ "e49bbce133a049f6f325db6b0cee49f406d03a6e" ], "author": { "name": "Fabien Chouteau", "email": "fabien.chouteau@barco.com", "time": "Thu Apr 08 09:31:15 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:35 2010 -0700" }, "message": "USB: gadget: add HID gadget driver\n\ng_hid is a USB gadget driver implementing the Human Interface Device class\nspecification. The driver handles basic HID protocol handling in the\nkernel, and allows userspace to read/write HID reports trough /dev/hidgX\ncharacter devices.\n\nSigned-off-by: Fabien Chouteau \u003cfabien.chouteau@barco.com\u003e\nSigned-off-by: Peter Korsgaard \u003cpeter.korsgaard@barco.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "eaa3bcb06aed1ac1d6d9e3edd3b5f72ea57a6ac0", "tree": "a55b216df6a5977ab8d502df44397ef7ebbb11bc", "parents": [ "25d514ca227e1ac81d0906a4ccf2aa171f50a600" ], "author": { "name": "Johan Hovold", "email": "jhovold@gmail.com", "time": "Wed Mar 17 23:06:08 2010 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:35 2010 -0700" }, "message": "USB: serial: generalise write buffer preparation\n\nGeneralise write buffer preparation.\n\nThis allows for drivers to manipulate (e.g. add headers) to bulk out\ndata before it is sent.\n\nThis adds a new function pointer to usb_serial_driver:\n\nint (*prepare_write_buffer)(struct usb_serial_port *port,\n\t\tvoid **dest, size_t size, const void *src, size_t count);\n\nThe function is generic and can be used with either kfifo-based or\nmulti-urb writes:\n\nIf *dest is NULL the implementation should allocate dest.\nIf src is NULL the implementation should use the port write fifo.\n\nIf not set, a generic implementation is used which simply uses memcpy or\nkfifo_out.\n\nSigned-off-by: Johan Hovold \u003cjhovold@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "25d514ca227e1ac81d0906a4ccf2aa171f50a600", "tree": "599690248485fb28cd61cf0ce73004e4fbbf3559", "parents": [ "40f92f0dcd9b215c48c53a226328e8e36615e367" ], "author": { "name": "Johan Hovold", "email": "jhovold@gmail.com", "time": "Wed Mar 17 23:06:07 2010 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:35 2010 -0700" }, "message": "USB: serial: re-implement multi-urb writes in generic driver\n\nUse dynamic transfer buffer sizes since it is more efficient to let the\nhost controller do the partitioning to fit endpoint size. This way we\nalso do not use more than one urb per write request.\n\nReplace max_in_flight_urbs with multi_urb_write flag in struct\nusb_serial_driver to enable multi-urb writes.\n\nUse MAX_TX_URBS\u003d40 and a max buffer size of PAGE_SIZE to prevent DoS\nattacks.\n\nSigned-off-by: Johan Hovold \u003cjhovold@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "231543206452f5c42bace54b5c13dfe5a0313812", "tree": "cbefc56d6c37f50c895a37c47161ac5733cda24c", "parents": [ "0f3d5bae2bdacce6c6c1d116809d6b3d50338df7" ], "author": { "name": "Johan Hovold", "email": "jhovold@gmail.com", "time": "Wed Mar 17 23:05:57 2010 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:34 2010 -0700" }, "message": "USB: serial: generalise generic read implementation\n\nAdd process_read_urb to usb_serial_driver so that a driver can rely on\nthe generic read (and throttle) mechanism but still do device specific\nprocessing of incoming data (such as adding tty_flags before pushing to\nline discipline).\n\nThe default generic implementation handles sysrq for consoles but\notherwise simply pushes to tty.\n\nSigned-off-by: Johan Hovold \u003cjhovold@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "41bd72f9041def8e3334d3e3693862d078f5cb9a", "tree": "6a63cccfedd49a8a6fd407dd275657fc52e1fb93", "parents": [ "f26788da3b342099d2b02d99ba1cb7f154d6ef7b" ], "author": { "name": "Johan Hovold", "email": "jhovold@gmail.com", "time": "Wed Mar 17 23:05:53 2010 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:33 2010 -0700" }, "message": "USB: serial: refactor read urb submission in generic driver\n\nUse the already exported function for submitting the read urb associated\nwith a usb_serial_port.\n\nMake sure it returns the result of usb_submit_urb and rename to the\nmore descriptive usb_serial_generic_submit_read_urb.\n\nSigned-off-by: Johan Hovold \u003cjhovold@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "bbcb2b907415a90334521a31a8767cd77462c716", "tree": "8ee895f4ee3352a7f57c52c5e99119bc6838edac", "parents": [ "317149c655defedfaf432143b86a720cfc12a424" ], "author": { "name": "Johan Hovold", "email": "jhovold@gmail.com", "time": "Wed Mar 17 23:00:37 2010 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:33 2010 -0700" }, "message": "USB: serial: allow drivers to define bulk buffer sizes\n\nAllow drivers to define custom bulk in/out buffer sizes in struct\nusb_serial_driver. If not set, fall back to the default buffer size\nwhich matches the endpoint size.\n\nThree drivers are currently freeing the pre-allocated buffers and\nallocating larger ones to achieve this at port probe (ftdi_sio) or even\nat port open (ipaq and iuu_phoenix), which needless to say is suboptimal.\n\nSigned-off-by: Johan Hovold \u003cjhovold@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "317149c655defedfaf432143b86a720cfc12a424", "tree": "c9834f9813e14b595c93da5d7ceb718af39d1c5d", "parents": [ "7f0ae3a8eeb7f231dc99cee7c871ba64e07ebefe" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Mar 29 12:03:17 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:32 2010 -0700" }, "message": "USB: Add a new quirk: USB_QUIRK_HONOR_BNUMINTERFACES\n\nAdd a new quirk USB_QUIRK_HONOR_BNUMINTERFACES, when this quirk is\nset and a device has more interface descriptors in a configuration\nthen it claims to have in config-\u003ebNumInterfaces, ignore all additional\ninterfaces.\n\nThis is needed for devices which try to hide unused interfaces by only\nlowering config-\u003ebNumInterfaces, and which can\u0027t handle if you try to talk\nto the \"hidden\" interfaces.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nAcked-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "6ddc6dae4ab559b648bc348e3a48e113e92ab4a2", "tree": "0a67e89a4501ed974217f02e1a0e86d21f15589b", "parents": [ "fb9c58edf13fc30d160ce52018576a1d7d45d795" ], "author": { "name": "Cliff Cai", "email": "cliff.cai@analog.com", "time": "Fri Mar 12 10:29:10 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:32 2010 -0700" }, "message": "USB: musb: allow the Blackfin vrsel gpio to be active low\n\nRather than hardcoding the gpio levels for vrsel, allow the platform\nresources to handle this so boards can be active high or low.\n\nSigned-off-by: Cliff Cai \u003ccliff.cai@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Felipe Balbi \u003cfelipe.balbi@nokia.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "e6c213b2968cbee4cfb8f89f2d685b9ad07eefbd", "tree": "bbe7c6bd630c3fef4dc1062b762c5fba9b7d1d6d", "parents": [ "bd5afa9eac6daa408412a31a6c69e87e8bd28c7e" ], "author": { "name": "Felipe Balbi", "email": "felipe.balbi@nokia.com", "time": "Fri Mar 12 10:29:06 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:31 2010 -0700" }, "message": "usb: musb: allow board to pass down fifo mode\n\nboards might want to optimize their fifo configuration\nto the particular needs of that specific board. Allow\nthat by moving all related data structures to\n\u003clinux/usb/musb.h\u003e\n\nSigned-off-by: Felipe Balbi \u003cfelipe.balbi@nokia.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "bd5afa9eac6daa408412a31a6c69e87e8bd28c7e", "tree": "5f99e4ee9d787d038746c2217f7c1152fad3c453", "parents": [ "9757de384451a606af8c722213cb973192cbbd1b" ], "author": { "name": "Jason Wessel", "email": "jason.wessel@windriver.com", "time": "Mon Mar 08 21:50:12 2010 -0600" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:31 2010 -0700" }, "message": "usb-serial: Use tty_port version console instead of usb_serial_port\n\nReplace all instances of using the console variable in struct\nusb_serial_port with the struct tty_port version.\n\nCC: Alan Cox \u003calan@linux.intel.com\u003e\nCC: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nCC: Oliver Neukum \u003coliver@neukum.org\u003e\nCC: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCC: linux-usb@vger.kernel.org\nCC: linux-kernel@vger.kernel.org\nSigned-off-by: Jason Wessel \u003cjason.wessel@windriver.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "288ead45fa6637e959015d055304f521cbbc0575", "tree": "b150572e95760f26f905802269b3a76da0260976", "parents": [ "45f30e0bdadd4660383250e85b543b0bea05413d" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Thu Mar 04 11:32:30 2010 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:31 2010 -0700" }, "message": "USB: remove bogus USB_PORT_FEAT_*_SPEED symbols\n\nThis patch (as1348) removes the bogus\nUSB_PORT_FEAT_{HIGHSPEED,SUPERSPEED} symbols from ch11.h. No such\nfeatures are defined by the USB spec. (There is a PORT_LOWSPEED\nfeature, but the spec doesn\u0027t mention it except to say that host\nsoftware should never use it.) The speed indicators are port\nstatuses, not port features.\n\nAs a temporary workaround for the xhci-hcd driver, a fictional\nUSB_PORT_STAT_SUPER_SPEED symbol is added.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nCC: Sarah Sharp \u003csarah.a.sharp@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "d20db4b4e938aa8e4e5735b5a1b202de5800400e", "tree": "7433cdfb9df46cb19016da85682e98a724ae8efb", "parents": [ "d65d7e7ef3dc5e61e4dfaac54ec6d3e97f9a1108" ], "author": { "name": "Eric Lescouet", "email": "Eric.Lescouet@virtuallogix.com", "time": "Sat Apr 24 23:38:17 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:30 2010 -0700" }, "message": "USB: split hub.h into ch11.h and merge-in hcd.h\n\nBase on inputs from Alan Stern, split the hub.h header into:\n- new ch11.h header (most of it) containing constants and\n structures from chapter 11 of the USB 2.0 spec.\n- a small remaining part being merged into hcd.h.\n\nSigned-of-by: Eric Lescouet \u003ceric@lescouet.org\u003e\nCc: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "d65d7e7ef3dc5e61e4dfaac54ec6d3e97f9a1108", "tree": "c6dc49e59baea2c3f20fb1937799666a7c828284", "parents": [ "27729aadd31dafddaaf64c24f8ef6d0ff750f3aa" ], "author": { "name": "Eric Lescouet", "email": "Eric.Lescouet@virtuallogix.com", "time": "Sat Apr 24 23:34:27 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:30 2010 -0700" }, "message": "USB: make hub.h public (drivers dependency)\n\nThe usbcore headers: hcd.h and hub.h are shared between usbcore,\nHCDs and a couple of other drivers (e.g. USBIP modules).\nSo, it makes sense to move them into a more public location and\nto cleanup dependency of those modules on kernel internal headers.\nThis patch moves hub.h from drivers/usb/core into include/linux/usb/\n\nSigned-of-by: Eric Lescouet \u003ceric@lescouet.org\u003e\nCc: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "27729aadd31dafddaaf64c24f8ef6d0ff750f3aa", "tree": "20499b4132eaad36fb177b028600694fc4d0626a", "parents": [ "44ebd037c54f80db3121ac9f5fe6e677b76e11d5" ], "author": { "name": "Eric Lescouet", "email": "Eric.Lescouet@virtuallogix.com", "time": "Sat Apr 24 23:21:52 2010 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu May 20 13:21:30 2010 -0700" }, "message": "USB: make hcd.h public (drivers dependency)\n\nThe usbcore headers: hcd.h and hub.h are shared between usbcore,\nHCDs and a couple of other drivers (e.g. USBIP modules).\nSo, it makes sense to move them into a more public location and\nto cleanup dependency of those modules on kernel internal headers.\nThis patch moves hcd.h from drivers/usb/core into include/linux/usb/\n\nSigned-of-by: Eric Lescouet \u003ceric@lescouet.org\u003e\nCc: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "a0fe3cc5d36a5f5b4f60abfe1a4b1caf4a5cce5a", "tree": "99a735d89df5bf49cf4edda1ba53bd9175d0f163", "parents": [ "04afb40593f9a3007e5ea817d009529ef10fb685", "a62f0d27b4196bad5e900d766b285feb7069cd16" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 10:33:06 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 10:33:06 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)\n Input: psmouse - small formatting changes to better follow coding style\n Input: synaptics - set dimensions as reported by firmware\n Input: elantech - relax signature checks\n Input: elantech - enforce common prefix on messages\n Input: wistron_btns - switch to using kmemdup()\n Input: usbtouchscreen - switch to using kmemdup()\n Input: do not force selecting i8042 on Moorestown\n Input: Documentation/sysrq.txt - update KEY_SYSRQ info\n Input: 88pm860x_onkey - remove invalid irq number assignment\n Input: i8042 - add a PNP entry to the aux device list\n Input: i8042 - add some extra PNP keyboard types\n Input: wm9712 - fix wm97xx_set_gpio() logic\n Input: add keypad driver for keys interfaced to TCA6416\n Input: remove obsolete {corgi,spitz,tosa}kbd.c\n Input: kbtab - do not advertise unsupported events\n Input: kbtab - simplify kbtab_disconnect()\n Input: kbtab - fix incorrect size parameter in usb_buffer_free\n Input: acecad - don\u0027t advertise mouse events\n Input: acecad - fix some formatting issues\n Input: acecad - simplify usb_acecad_disconnect()\n ...\n\nTrivial conflict in Documentation/feature-removal-schedule.txt\n" }, { "commit": "7f06a8b26aba1dc03b42272dc0089a800372c575", "tree": "7c67198f83d069eb13fd417e022d111b7e4c82a1", "parents": [ "c3ad33c9bcb6616999953af76f16318120fe3691", "d71f4cece4bd97d05592836202fc04ff2e7817e3" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:41:44 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:41:44 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (250 commits)\n ALSA: hda: Storage class should be before const qualifier\n ASoC: tpa6130a2: Remove CPVSS and HPVdd supplies\n ASoC: tpa6130a2: Define output pins with SND_SOC_DAPM_OUTPUT\n ASoC: sdp4430 - add sdp4430 pcm ops to DAI.\n ASoC: TWL6040: Enable earphone path in codec\n ASoC: SDP4430: Add support for Earphone speaker\n ASoC: SDP4430: Add sdp4430 machine driver\n ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF\n ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power function\n ALSA: sound/pci/asihpi: Use kzalloc\n ALSA: hdmi - dont fail on extra nodes\n ALSA: intelhdmi - add id for the CougarPoint chipset\n ALSA: intelhdmi - user friendly codec name\n ALSA: intelhdmi - add dependency on SND_DYNAMIC_MINORS\n ALSA: asihpi: incorrect range check\n ALSA: asihpi: testing the wrong variable\n ALSA: es1688: add pedantic range checks\n ARM: McBSP: Add support for omap4 in McBSP driver\n ARM: McBSP: Fix request for irq in OMAP4\n OMAP: McBSP: Add 32-bit mode support\n ...\n" }, { "commit": "c3ad33c9bcb6616999953af76f16318120fe3691", "tree": "a6b239cecc675693cfb5145493bd1b750ea360fb", "parents": [ "fb091be08d1acf184e8801dfdcace6e0cb19b1fe", "b5c80bc5d70a1ce5b071ed06dd95292b9de46f95" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:41:17 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:41:17 2010 -0700" }, "message": "Merge branch \u0027for-linus/i2c-2635\u0027 of git://git.fluff.org/bjdooks/linux\n\n* \u0027for-linus/i2c-2635\u0027 of git://git.fluff.org/bjdooks/linux: (21 commits)\n i2c-highlander: remover superflous variable\n i2c-ibm-iic: drop NO_IRQ\n i2c-cpm: drop NO_IRQ\n i2c-mpc: drop NO_IRQ\n MAINTAINERS: add i2c tree for embedded platforms\n i2c-pxa: only define \u0027blue_murder\u0027-function if DEBUG is #defined\n i2c-pxa: remove unused macro\n i2c-nomadik: fix operator precedence warning\n i2c-nomadik: release region when removed\n OMAP3: I2C: Clean up Errata 1p153 handling\n OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt\n omap: i2c: add a timeout to the busy waiting\n omap: i2c: make errata 1.153 workaround a separate function\n i2c-omap: add mpu wake up latency constraint in i2c\n omap: i2c: Add i2c support on omap4 platform\n i2c-bfin-twi: return completion in interrupt for smbus quick transfers\n i2c-bfin-twi: remove redundant retry\n i2c-bfin-twi: fix lost interrupts at high speeds\n i2c-bfin-twi: add debug output for error status\n i2c-bfin-twi: integrate timeout timer with completion interface\n ...\n" }, { "commit": "fb091be08d1acf184e8801dfdcace6e0cb19b1fe", "tree": "cbd0c4200fd8628d592167589ca790e36fc4ae26", "parents": [ "bd7fc2f2d807fdb254f7efc542f8eec3f23e289e", "e8d0416796d43a950ec7b65629e53419b2e22453" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:37:45 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:37:45 2010 -0700" }, "message": "Merge branch \u0027v4l_for_2.6.35\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6\n\n* \u0027v4l_for_2.6.35\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (534 commits)\n V4L/DVB (13554a): v4l: Use the video_drvdata function in drivers\n V4L/DVB: vivi and mem2mem_testdev need slab.h to build\n V4L/DVB: tm6000: bugfix image position\n V4L/DVB: IR/imon: remove dead IMON_KEY_RELEASE_OFFSET\n V4L/DVB: tm6000: README - add vbi\n V4L/DVB: Fix unlock logic at medusa_video_init\n V4L/DVB: fix dvb frontend lockup\n V4L/DVB: s2255drv: remove dead code\n V4L/DVB: s2255drv: return if vdev not found\n V4L/DVB: ov511: cleanup: remove unneeded null check\n V4L/DVB: media/mem2mem: dereferencing free memory\n V4L/DVB: media/IR: Add missing include file to rc-map.c\n V4L/DVB: dvb/stv6110x: cleanup error handling\n V4L/DVB: ngene: Add lgdt3303 and mt2131 deps to Kconfig\n V4L/DVB: ngene: start separating out DVB functions into separate file\n V4L/DVB: ngene: split out card specific code into a separate file\n V4L/DVB: ngene: split out i2c code into a separate file\n V4L/DVB: ngene: add initial support for digital side of Avermedia m780\n V4L/DVB: ngene: properly support boards where channel 0 isn\u0027t a TS input\n V4L-DVB: ngene: make sure that tuner headers are included\n ...\n" }, { "commit": "bd7fc2f2d807fdb254f7efc542f8eec3f23e289e", "tree": "ad84372329bd86eceb36aafed80cfb8a8420c063", "parents": [ "f39d01be4c59a61a08d0cb53f615e7016b85d339", "360ff7833098e944e5003618b03894251e937802" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:27:37 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:27:37 2010 -0700" }, "message": "Merge branch \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev\n\n* \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (49 commits)\n libata-sff: separate out BMDMA qc_issue\n libata-sff: prd is BMDMA specific\n libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific\n libata-sff: separate out BMDMA EH\n libata-sff: port_task is SFF specific\n libata-sff: ap-\u003e[last_]ctl are SFF specific\n libata-sff: rename ap-\u003eops-\u003edrain_fifo() to sff_drain_fifo()\n libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init()\n libata-sff: clean up BMDMA initialization\n libata-sff: clean up inheritance in several drivers\n libata-sff: reorder SFF/BMDMA functions\n sata_inic162x: kill PORT_PRD_ADDR initialization\n libata: kill ATA_FLAG_DISABLED\n libata-sff: kill unused prototype and make ata_dev_select() static\n libata-sff: update bmdma host bus error handling\n sata_mv: remove unnecessary initialization\n sata_inic162x: inic162x is not dependent on CONFIG_ATA_SFF\n pata_sch: use ata_pci_sff_init_one()\n pata_sil680: Do our own exec_command posting\n libata: Remove excess delay in the tf_load path\n ...\n" }, { "commit": "f39d01be4c59a61a08d0cb53f615e7016b85d339", "tree": "6777590e3ff2ddf4df1d38444ba7d692cd463b7b", "parents": [ "54291263519ac2c9bdda68b23b02fef3808deed4", "7db82437cfcac4bdfe79a6323eb554fdfa271623" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:20:59 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:20:59 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)\n vlynq: make whole Kconfig-menu dependant on architecture\n add descriptive comment for TIF_MEMDIE task flag declaration.\n EEPROM: max6875: Header file cleanup\n EEPROM: 93cx6: Header file cleanup\n EEPROM: Header file cleanup\n agp: use NULL instead of 0 when pointer is needed\n rtc-v3020: make bitfield unsigned\n PCI: make bitfield unsigned\n jbd2: use NULL instead of 0 when pointer is needed\n cciss: fix shadows sparse warning\n doc: inode uses a mutex instead of a semaphore.\n uml: i386: Avoid redefinition of NR_syscalls\n fix \"seperate\" typos in comments\n cocbalt_lcdfb: correct sections\n doc: Change urls for sparse\n Powerpc: wii: Fix typo in comment\n i2o: cleanup some exit paths\n Documentation/: it\u0027s -\u003e its where appropriate\n UML: Fix compiler warning due to missing task_struct declaration\n UML: add kernel.h include to signal.c\n ...\n" }, { "commit": "46ee9645094ad1eb5b4888882ecaa1fb87dcd2a3", "tree": "d0a48e993568b6a2415cfc21fc06eaa2fd886429", "parents": [ "fa5312d9e87e7222c6c384c4e930dc149bc1178d", "25f3a5a2854dce8b8413fd24cc9d5b9e3632be54" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:03:55 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:03:55 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:\n PM: PM QOS update fix\n Freezer / cgroup freezer: Update stale locking comments\n PM / platform_bus: Allow runtime PM by default\n i2c: Fix bus-level power management callbacks\n PM QOS update\n PM / Hibernate: Fix block_io.c printk warning\n PM / Hibernate: Group swap ops\n PM / Hibernate: Move the first_sector out of swsusp_write\n PM / Hibernate: Separate block_io\n PM / Hibernate: Snapshot cleanup\n FS / libfs: Implement simple_write_to_buffer\n PM / Hibernate: document open(/dev/snapshot) side effects\n PM / Runtime: Add sysfs debug files\n PM: Improve device power management document\n PM: Update device power management document\n PM: Allow runtime_suspend methods to call pm_schedule_suspend()\n PM: pm_wakeup - switch to using bool\n" }, { "commit": "9d35bc1ec696ebfc5662a0d00b4d36564ff3af53", "tree": "29c706e129d188f5bfaf55ceaf4a0d0630b37892", "parents": [ "96b5b7f4f2d59b37c1fc2fba1ae25999accd6dcd", "ffebedb7ab3f7964a70a1771547b26af38a189d2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:00:34 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 09:00:34 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:\n IB/core: Use kmemdup() instead of kmalloc()+memcpy()\n IB/iser: Fix error flow in iser_create_ib_conn_res()\n IB/iser: Enhance disconnection logic for multi-pathing\n IB/iser: Remove buggy back-pointer setting\n IB/iser: Add asynchronous event handler\n MAINTAINERS: Add cxgb4 and iw_cxgb4 entries\n RDMA/cxgb3: Shrink .text with compile-time init of handlers arrays\n IPoIB: Allow disabling/enabling TSO on the fly through ethtool\n IB/mlx4: Add support for masked atomic operations\n IB/core: Add support for masked atomic operations\n RDMA/cma: Randomize local port allocation\n RDMA/nes: Make unnecessarily global functions static\n RDMA/nes: Make nesadapter-\u003ephy_lock usage consistent\n RDMA/cxgb4: Add driver for Chelsio T4 RNIC\n IB/mthca: Use the dma state API instead of pci equivalents\n RDMA/amso1100: Use the dma state API instead of pci equivalents\n RDMA/cxgb3: Don\u0027t free skbs on NET_XMIT_* indications from LLD\n RDMA/cxgb3: Use the dma state API instead of pci equivalents\n IB: Explicitly rule out llseek to avoid BKL in default_llseek()\n" }, { "commit": "96b5b7f4f2d59b37c1fc2fba1ae25999accd6dcd", "tree": "cda421c6cd7533940b35504660a05a366a3ece0c", "parents": [ "f72caf7e496465182eeda842ac66a5e75404ddf1", "539c99fd7fc28f8db257c713c10fb4aceadf8887" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 08:55:50 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 08:55:50 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (61 commits)\n KEYS: Return more accurate error codes\n LSM: Add __init to fixup function.\n TOMOYO: Add pathname grouping support.\n ima: remove ACPI dependency\n TPM: ACPI/PNP dependency removal\n security/selinux/ss: Use kstrdup\n TOMOYO: Use stack memory for pending entry.\n Revert \"ima: remove ACPI dependency\"\n Revert \"TPM: ACPI/PNP dependency removal\"\n KEYS: Do preallocation for __key_link()\n TOMOYO: Use mutex_lock_interruptible.\n KEYS: Better handling of errors from construct_alloc_key()\n KEYS: keyring_serialise_link_sem is only needed for keyring-\u003ekeyring links\n TOMOYO: Use GFP_NOFS rather than GFP_KERNEL.\n ima: remove ACPI dependency\n TPM: ACPI/PNP dependency removal\n selinux: generalize disabling of execmem for plt-in-heap archs\n LSM Audit: rename LSM_AUDIT_NO_AUDIT to LSM_AUDIT_DATA_NONE\n CRED: Holding a spinlock does not imply the holding of RCU read lock\n SMACK: Don\u0027t #include Ext2 headers\n ...\n" }, { "commit": "d71f4cece4bd97d05592836202fc04ff2e7817e3", "tree": "6c877c7a938758b1323d9c97d46b9c536e618c69", "parents": [ "19008bdacb9f7841166ebafe0aef361ee582ffbf", "ad8332c1302bcb4f80d593fd3eb477be9d7f5604" ], "author": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Thu May 20 12:00:43 2010 +0200" }, "committer": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Thu May 20 12:00:43 2010 +0200" }, "message": "Merge branch \u0027topic/asoc\u0027 into for-linus\n\nConflicts:\n\tsound/soc/codecs/ad1938.c\n" }, { "commit": "9ce3db4e7949a394bad0de91883b5e786c17607a", "tree": "6b51509ddf78d067d28dc042674f54c1f3434fcd", "parents": [ "20406f9b67e6fde4fff4639225c7a0e5ea6eaa9b", "e213e9cf707c51808e372dabd1070a61af17e77b" ], "author": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Thu May 20 11:59:43 2010 +0200" }, "committer": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Thu May 20 11:59:43 2010 +0200" }, "message": "Merge branch \u0027topic/usb\u0027 into for-linus\n" }, { "commit": "5e8aa85253513b9c1ade8bd71dc341218a752a65", "tree": "84240b7f72fefb805c78300de0ae23b7b96bf5c2", "parents": [ "7bd9db83087aecef8279c0b8b9dfef4db4a8fc3c", "550a8b691ca67761bbf382d98fbd81d215f1d7f0" ], "author": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Thu May 20 11:59:29 2010 +0200" }, "committer": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Thu May 20 11:59:29 2010 +0200" }, "message": "Merge branch \u0027topic/misc\u0027 into for-linus\n" }, { "commit": "f72caf7e496465182eeda842ac66a5e75404ddf1", "tree": "682e2e4b34d6240ea5dbc516d368dd14b21de182", "parents": [ "6a6be470c3071559970c5659354484d4f664050e", "e4e83ea47babd9d4bf95a13aed87f8ef51e46472" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 17:24:54 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 17:24:54 2010 -0700" }, "message": "Merge branch \u0027for-2.6.35\u0027 of git://linux-nfs.org/~bfields/linux\n\n* \u0027for-2.6.35\u0027 of git://linux-nfs.org/~bfields/linux: (45 commits)\n Revert \"nfsd4: distinguish expired from stale stateids\"\n nfsd: safer initialization order in find_file()\n nfs4: minor callback code simplification, comment\n NFSD: don\u0027t report compiled-out versions as present\n nfsd4: implement reclaim_complete\n nfsd4: nfsd4_destroy_session must set callback client under the state lock\n nfsd4: keep a reference count on client while in use\n nfsd4: mark_client_expired\n nfsd4: introduce nfs4_client.cl_refcount\n nfsd4: refactor expire_client\n nfsd4: extend the client_lock to cover cl_lru\n nfsd4: use list_move in move_to_confirmed\n nfsd4: fold release_session into expire_client\n nfsd4: rename sessionid_lock to client_lock\n nfsd4: fix bare destroy_session null dereference\n nfsd4: use local variable in nfs4svc_encode_compoundres\n nfsd: further comment typos\n sunrpc: centralise most calls to svc_xprt_received\n nfsd4: fix unlikely race in session replay case\n nfsd4: fix filehandle comment\n ...\n" }, { "commit": "6a6be470c3071559970c5659354484d4f664050e", "tree": "d4b335e863e426acad96fe5e4bce2e3e064abc32", "parents": [ "98c89cdd3a292af3451e47a2a33132f5183861b0", "126e216a8730532dfb685205309275f87e3d133e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 17:24:05 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 17:24:05 2010 -0700" }, "message": "Merge branch \u0027nfs-for-2.6.35\u0027 of git://git.linux-nfs.org/projects/trondmy/nfs-2.6\n\n* \u0027nfs-for-2.6.35\u0027 of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (78 commits)\n SUNRPC: Don\u0027t spam gssd with upcall requests when the kerberos key expired\n SUNRPC: Reorder the struct rpc_task fields\n SUNRPC: Remove the \u0027tk_magic\u0027 debugging field\n SUNRPC: Move the task-\u003etk_bytes_sent and tk_rtt to struct rpc_rqst\n NFS: Don\u0027t call iput() in nfs_access_cache_shrinker\n NFS: Clean up nfs_access_zap_cache()\n NFS: Don\u0027t run nfs_access_cache_shrinker() when the mask is GFP_NOFS\n SUNRPC: Ensure rpcauth_prune_expired() respects the nr_to_scan parameter\n SUNRPC: Ensure memory shrinker doesn\u0027t waste time in rpcauth_prune_expired()\n SUNRPC: Dont run rpcauth_cache_shrinker() when gfp_mask is GFP_NOFS\n NFS: Read requests can use GFP_KERNEL.\n NFS: Clean up nfs_create_request()\n NFS: Don\u0027t use GFP_KERNEL in rpcsec_gss downcalls\n NFSv4: Don\u0027t use GFP_KERNEL allocations in state recovery\n SUNRPC: Fix xs_setup_bc_tcp()\n SUNRPC: Replace jiffies-based metrics with ktime-based metrics\n ktime: introduce ktime_to_ms()\n SUNRPC: RPC metrics and RTT estimator should use same RTT value\n NFS: Calldata for nfs4_renew_done()\n NFS: Squelch compiler warning in nfs_add_server_stats()\n ...\n" }, { "commit": "164d44fd92e79d5bce54d0d62df9f856f7b23925", "tree": "9f21607849b7e684b255578ffdf41951bc31787e", "parents": [ "5bfec46baa3a752393433b8d89d3b2c70820f61d", "d7e81c269db899b800e0963dc4aceece1f82a680" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 17:11:10 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 17:11:10 2010 -0700" }, "message": "Merge branch \u0027timers-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027timers-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n clocksource: Add clocksource_register_hz/khz interface\n posix-cpu-timers: Optimize run_posix_cpu_timers()\n time: Remove xtime_cache\n mqueue: Convert message queue timeout to use hrtimers\n hrtimers: Provide schedule_hrtimeout for CLOCK_REALTIME\n timers: Introduce the concept of timer slack for legacy timers\n ntp: Remove tickadj\n ntp: Make time_adjust static\n time: Add xtime, wall_to_monotonic to feature-removal-schedule\n timer: Try to survive timer callback preempt_count leak\n timer: Split out timer function call\n timer: Print function name for timer callbacks modifying preemption count\n time: Clean up warp_clock()\n cpu-timers: Avoid iterating over all threads in fastpath_timer_check()\n cpu-timers: Change SIGEV_NONE timer implementation\n cpu-timers: Return correct previous timer reload value\n cpu-timers: Cleanup arm_timer()\n cpu-timers: Simplify RLIMIT_CPU handling\n" }, { "commit": "6e0b7b2c39b91b467270dd0bc383914f99e1fb28", "tree": "bdd28cb3ab5653404220d2bd9089203168ef869f", "parents": [ "e4e47eb15b7884963efe7f98231009c5770a2c3d", "4308ad801193f14ff42cb746da37cf07e35f0d08" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 17:09:40 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 17:09:40 2010 -0700" }, "message": "Merge branch \u0027irq-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027irq-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n genirq: Clear CPU mask in affinity_hint when none is provided\n genirq: Add CPU mask affinity hint\n genirq: Remove IRQF_DISABLED from core code\n genirq: Run irq handlers with interrupts disabled\n genirq: Introduce request_any_context_irq()\n genirq: Expose irq_desc-\u003enode in proc/irq\n\nFixed up trivial conflicts in Documentation/feature-removal-schedule.txt\n" }, { "commit": "20c9d2c4ab8243a1c311248232954b2c1da3ba75", "tree": "e035de70d7b89618bb0e6923272849df7d1acb9a", "parents": [ "f38e66e0077659e5d2ca3858fdb26fc9b1765b9f" ], "author": { "name": "Kalle Jokiniemi", "email": "kalle.jokiniemi@digia.com", "time": "Tue May 11 11:35:08 2010 -0700" }, "committer": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Thu May 20 00:18:59 2010 +0100" }, "message": "i2c-omap: add mpu wake up latency constraint in i2c\n\nWhile waiting for completion of the i2c transfer, the\nMPU could hit OFF mode and cause several msecs of\ndelay that made i2c transfers fail more often. The\nextra delays and subsequent re-trys cause i2c clocks\nto be active more often. This has also an negative\neffect on power consumption.\n\nCreated a mechanism for passing and using the\nconstraint setting function in driver code. The used\nmpu wake up latency constraints are now set individually\nper bus, and they are calculated based on clock rate\nand fifo size.\n\nThanks to Jarkko Nikula, Moiz Sonasath, Paul Walmsley,\nand Nishanth Menon for tuning out the details of\nthis patch.\n\nUpdates by Kevin as requested by Tony:\n\n- Remove omap_set_i2c_constraint_func() in favor of conditionally\n adding the flag in omap_i2c_add_bus() in order to keep all the OMAP\n conditional checking in a single location.\n- Update set_mpu_wkup_lat prototypes to match OMAP PM layer so\n OMAP PM function can be used directly in pdata.\n\nCc: Moiz Sonasath \u003cm-sonasath@ti.com\u003e\nCc: Jarkko Nikula \u003cjhnikula@gmail.com\u003e\nCc: Paul Walmsley \u003cpaul@pwsan.com\u003e\nCc: Nishanth Menon \u003cnm@ti.com\u003e\nSigned-off-by: Kalle Jokiniemi \u003ckalle.jokiniemi@digia.com\u003e\nSigned-off-by: Kevin Hilman \u003ckhilman@deeprootsystems.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n" }, { "commit": "1d3c6ff44ad4b5f113602e153026a338f0f9b3ff", "tree": "1e1f2932634fc6d0e4acfe68496c1c727b83a13e", "parents": [ "7c7cbaf5b82c418cd3b1dcf718f71d0e6057e639", "717e7c2672e37253a4d3aa70e4716b5b0a658761" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 11:37:22 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 11:37:22 2010 -0700" }, "message": "Merge branch \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits)\n ARM: remove \u0027select GENERIC_TIME\u0027\n ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO\n ARM: 6074/1: oprofile: convert from sysdev to platform device\n ARM: 6073/1: oprofile: remove old files and update KConfig\n ARM: 6072/1: oprofile: use perf-events framework as backend\n ARM: 6071/1: perf-events: allow modules to query the number of hardware counters\n ARM: 6070/1: perf-events: add support for xscale PMUs\n ARM: 6069/1: perf-events: use numeric ID to identify PMU\n ARM: 6064/1: pmu: register IRQs at runtime\n ARM: Optionally allow ARMv6 to use \u0027normal, bufferable\u0027 memory for DMA\n ARM: 6134/1: Handle instruction cache maintenance fault properly\n ARM: nwfpe: allow debugging output to be configured at runtime\n ARM: rename mach_cpu_disable() to platform_cpu_disable()\n ARM: 6132/1: PL330: Add common core driver\n ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310\n ARM: Move memory mapping into mmu.c\n ARM: Ensure meminfo is sorted prior to sanity_check_meminfo\n ARM: Remove useless linux/bootmem.h includes\n ARM: convert /proc/cpu/aligment to seq_file\n arm: use asm-generic/scatterlist.h\n ...\n" }, { "commit": "7c7cbaf5b82c418cd3b1dcf718f71d0e6057e639", "tree": "da9aaa5a246af464b1e10d88618c1cad07b76314", "parents": [ "ba0234ec35127fe21d373db53cbaf9fe20620cb6", "4d0956b8f597aac10208ca763f8fe641fde16aab" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 11:36:03 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 11:36:03 2010 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (127 commits)\n sh: update defconfigs.\n sh: Fix up the NUMA build for recent LMB changes.\n sh64: provide a stub per_cpu_trap_init() definition.\n sh: fix up CONFIG_KEXEC\u003dn build.\n sh: fixup the docbook paths for clock framework shuffling.\n driver core: Early dev_name() depends on slab_is_available().\n sh: simplify WARN usage in SH clock driver\n sh: Check return value of clk_get on ms7724\n sh: Check return value of clk_get on ecovec24\n sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c\n sh: move sh clock.c contents to drivers/sh/clk.\n sh: move sh asm/clock.h contents to linux/sh_clk.h V2\n sh: remove unused clock lookup\n sh: switch boards to clkdev\n sh: switch sh4-202 to clkdev\n sh: switch shx3 to clkdev\n sh: switch sh7757 to clkdev\n sh: switch sh7763 to clkdev\n sh: switch sh7780 to clkdev\n sh: switch sh7786 to clkdev\n ...\n" }, { "commit": "ba0234ec35127fe21d373db53cbaf9fe20620cb6", "tree": "a2cbef204482512ae9e723f2bf4d22051975ef45", "parents": [ "537b60d17894b7c19a6060feae40299d7109d6e7", "939e379e9e183ae6291ac7caa4a5e1dfadae4ccc" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 11:35:30 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 19 11:35:30 2010 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git390.marist.edu/pub/scm/linux-2.6\n\n* \u0027for-linus\u0027 of git://git390.marist.edu/pub/scm/linux-2.6: (24 commits)\n [S390] drivers/s390/char: Use kmemdup\n [S390] drivers/s390/char: Use kstrdup\n [S390] debug: enable exception-trace debug facility\n [S390] s390_hypfs: Add new attributes\n [S390] qdio: remove API wrappers\n [S390] qdio: set correct bit in dsci\n [S390] qdio: dont convert timestamps to microseconds\n [S390] qdio: remove memset hack\n [S390] qdio: prevent starvation on PCI devices\n [S390] qdio: count number of qdio interrupts\n [S390] user space fault: report fault before calling do_exit\n [S390] topology: expose core identifier\n [S390] dasd: remove uid from devmap\n [S390] dasd: add dynamic pav toleration\n [S390] vdso: add missing vdso_install target\n [S390] vdso: remove redundant check for CONFIG_64BIT\n [S390] avoid default_llseek in s390 drivers\n [S390] vmcp: disallow modular build\n [S390] add breaking event address for user space\n [S390] virtualization aware cpu measurement\n ...\n" }, { "commit": "360ff7833098e944e5003618b03894251e937802", "tree": "aaa8c8f771cf35b2a0dab58ea6bad35d88f4ac8a", "parents": [ "f60d70113fa04e32aee2dedbf304a48469c9c45c" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon May 10 21:41:42 2010 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Wed May 19 13:38:55 2010 -0400" }, "message": "libata-sff: separate out BMDMA qc_issue\n\nSeparate out ata_bmdma_qc_issue() from ata_sff_qc_issue() such that\nata_sff_qc_issue() only deals with non-BMDMA SFF protocols (PIO and\nnodata) while ata_bmdma_qc_issue() deals with the BMDMA protocols and\nuses ata_sff_qc_issue() for non-DMA commands. All the users are\nupdated accordingly.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "f60d70113fa04e32aee2dedbf304a48469c9c45c", "tree": "6e74f483773dfae0adda0faa8754b5ce6129d8f7", "parents": [ "f47451c45fe0032ef491aaf3e0623fa0154e156d" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon May 10 21:41:41 2010 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Wed May 19 13:38:54 2010 -0400" }, "message": "libata-sff: prd is BMDMA specific\n\nstruct ata_prd and ap-\u003eprd are BMDMA specific. Add bmdma_ prefix to\nthem and move them inside CONFIG_ATA_SFF.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "f47451c45fe0032ef491aaf3e0623fa0154e156d", "tree": "3e2901991480836be75f75288c2220ef086fe694", "parents": [ "fe06e5f9b7c61dc567edace3f4909672067f7d7e" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon May 10 21:41:40 2010 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Wed May 19 13:36:50 2010 -0400" }, "message": "libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific\n\nBoth qc_prep functions deal only with BMDMA PRD setup and PIO only SFF\ndrivers don\u0027t need them. Rename to ata_bmdma_[dumb_]qc_prep() and\nrelocate.\n\nAll usages are renamed except for pdc_adma and sata_qstor. Those two\ndrivers are not BMDMA drivers and don\u0027t need to call BMDMA qc_prep\nfunctions. Calls to ata_sff_qc_prep() in the two drivers are removed.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "fe06e5f9b7c61dc567edace3f4909672067f7d7e", "tree": "b2242169e8e3b32c63925ed9901fff9d49c26192", "parents": [ "c429137a67b82788d24682153bb9c96501a9ef34" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon May 10 21:41:39 2010 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Wed May 19 13:36:46 2010 -0400" }, "message": "libata-sff: separate out BMDMA EH\n\nSome of error handling logic in ata_sff_error_handler() and all of\nata_sff_post_internal_cmd() are for BMDMA. Create\nata_bmdma_error_handler() and ata_bmdma_post_internal_cmd() and move\nBMDMA part into those.\n\nWhile at it, change DMA protocol check to ata_is_dma(), fix\npost_internal_cmd to call ap-\u003eops-\u003ebmdma_stop instead of directly\ncalling ata_bmdma_stop() and open code hardreset selection so that\nata_std_error_handler() doesn\u0027t have to know about sff hardreset.\n\nAs these two functions are BMDMA specific, there\u0027s no reason to check\nfor bmdma_addr before calling bmdma methods if the protocol of the\nfailed command is DMA. sata_mv and pata_mpc52xx now don\u0027t need to set\n.post_internal_cmd to ATA_OP_NULL and pata_icside and sata_qstor don\u0027t\nneed to set it to their bmdma_stop routines.\n\nata_sff_post_internal_cmd() becomes noop and is removed.\n\nThis fixes p3 described in clean-up-BMDMA-initialization patch.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "c429137a67b82788d24682153bb9c96501a9ef34", "tree": "b24ed75908f08cc9cddb19efc74fcb46be75de8f", "parents": [ "5fe7454aa9c6ef5fcf506b0f2dfc20f696891f1a" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon May 10 21:41:38 2010 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Wed May 19 13:35:49 2010 -0400" }, "message": "libata-sff: port_task is SFF specific\n\nport_task is tightly bound to the standard SFF PIO HSM implementation.\nUsing it for any other purpose would be error-prone and there\u0027s no\nsuch user and if some drivers need such feature, it would be much\nbetter off using its own. Move it inside CONFIG_ATA_SFF and rename it\nto sff_pio_task.\n\nThe only function which is exposed to the core layer is\nata_sff_flush_pio_task() which is renamed from ata_port_flush_task()\nand now also takes care of resetting hsm_task_state to HSM_ST_IDLE,\nwhich is possible as it\u0027s now specific to PIO HSM.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "5fe7454aa9c6ef5fcf506b0f2dfc20f696891f1a", "tree": "94e01d83671ed916dd6c931333722702bf46c7ef", "parents": [ "8244cd05979ef924787aa70fd80304f1773976a1" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon May 10 21:41:37 2010 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Wed May 19 13:35:47 2010 -0400" }, "message": "libata-sff: ap-\u003e[last_]ctl are SFF specific\n\nap-\u003e[last_]ctl are specific to SFF controllers. Put them inside\nCONFIG_ATA_SFF and move initialization into ata_sff_port_init().\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "8244cd05979ef924787aa70fd80304f1773976a1", "tree": "1e6f2434807eb3adbc097b3f4d7a4240237bc105", "parents": [ "270390e1ae1818b111543b8bfffa08095d73c1a5" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon May 10 21:41:36 2010 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Wed May 19 13:35:44 2010 -0400" }, "message": "libata-sff: rename ap-\u003eops-\u003edrain_fifo() to sff_drain_fifo()\n\n-\u003edrain_fifo() is SFF specific. Rename and relocate it.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "c7087652e1890a3feef35b30ee1d4be68e1932cd", "tree": "04aeca0f44e87a531d7cb5f894b6790391c2c552", "parents": [ "8930ff254a3a80d4477c3391ade07d6dd2a036c7" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Mon May 10 21:41:34 2010 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Wed May 19 13:32:19 2010 -0400" }, "message": "libata-sff: clean up BMDMA initialization\n\nWhen BMDMA initialization failed or BMDMA was not available for\nwhatever reason, bmdma_addr was left at zero and used as an indication\nthat BMDMA shouldn\u0027t be used. This leads to the following problems.\n\np1. For BMDMA drivers which don\u0027t use traditional BMDMA register,\n ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those\n drivers either have to inherit from ata_sff_port_ops or clear\n -\u003emode_filter explicitly.\n\np2. non-BMDMA drivers call into BMDMA PRD table allocation. It\n doesn\u0027t actually allocate PRD table if bmdma_addr is not\n initialized but is still confusing.\n\np3. For BMDMA drivers which don\u0027t use traditional BMDMA register, some\n methods might not be invoked as expected (e.g. bmdma_stop from\n ata_sff_post_internal_cmd()).\n\np4. SFF drivers w/ custom DMA interface implement noop BMDMA ops\n worrying libata core might call into one of them.\n\nThese problems are caused by the muddy line between SFF and BMDMA and\nthe assumption that all BMDMA controllers initialize bmdma_addr.\n\nThis patch fixes p1 and p2 by removing the bmdma_addr assumption and\nmoving prd allocation to BMDMA port start. Later patches will fix the\nremaining issues.\n\nThis patch improves BMDMA initialization such that\n\n* When BMDMA register initialization fails, falls back to PIO instead\n of failing. ata_pci_bmdma_init() never fails now.\n\n* When ata_pci_bmdma_init() falls back to PIO, it clears\n ap-\u003emwdma_mask and udma_mask instead of depending on\n ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter()\n unnecessary thus resolving p1.\n\n* ata_port_start() which actually is BMDMA specific is moved to\n ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start()\n are killed.\n\n* ata_sff_port_start32() is moved and renamed to\n ata_bmdma_port_start32().\n\nDrivers which no longer call into PRD table allocation are...\n\n pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all\n drivers which inherit from ata_sff_port_ops.\n\npata_icside sets -\u003eport_start to ATA_OP_NULL as it doesn\u0027t need PRD\nbut is a BMDMA controller and doesn\u0027t have custom port_start like\nother such controllers.\n\nNote that with the previous patch which makes all and only BMDMA\ndrivers inherit from ata_bmdma_port_ops, this change doesn\u0027t break\ndrivers which need PRD table.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "8d0bc2b456103a34c11e01305cd1aed1cde579e5", "tree": "5e1e6ad55cc9e2b5c5617f6f320114b8cff9e3f3", "parents": [ "30ba3ead05763b172acaa65ae1be71af2a878940", "e40152ee1e1c7a63f4777791863215e3faa37a86" ], "author": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Wed May 19 10:12:41 2010 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Wed May 19 10:12:41 2010 -0700" }, "message": "Merge commit \u0027v2.6.34\u0027 into next\n" }, { "commit": "bc0f7f19ab9ba5c7ec648b400d1360b525fa1a3a", "tree": "d574a05efcfa88bc4ee1a5f066a656acfee2faf8", "parents": [ "7ded150f573d0ce26ac96fd4c214eee7984ad339" ], "author": { "name": "Pawel Osciak", "email": "p.osciak@samsung.com", "time": "Wed Apr 28 04:05:21 2010 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed May 19 12:58:37 2010 -0300" }, "message": "V4L/DVB: Add a new ERROR flag for DQBUF after recoverable streaming errors\n\nThis flag is intended to indicate streaming errors, which might have\nresulted in corrupted video data in the buffer, but the buffer can still\nbe reused and streaming may continue.\n\nSetting this flag and returning 0 is different from returning EIO. The\nlatter should now indicate more serious (unrecoverable) errors.\n\nThis patch also solves a problem with the ioctl handling code in\nvl42-ioctl.c, which does not copy buffer identification data back to the\nuserspace when EIO is returned, so there is no way for applications\nto discover on which buffer the operation failed in such cases.\n\nSigned-off-by: Pawel Osciak \u003cp.osciak@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "1bcaf4bd53872e70c4fceec6bbb76044325f337f", "tree": "ec4325572702805d33e91be10a7d38e65b2067b3", "parents": [ "dd96608369be9d3cfc604eaa3a53a2d38f1cb415" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sat Mar 27 14:09:52 2010 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed May 19 12:58:08 2010 -0300" }, "message": "V4L/DVB: v4l: add VSYNC and EOS events for use with ivtv\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "fda1021477b390506ebed0225eaa6d31a903e2b7", "tree": "ad76ba0cf4346ba917a6020aaa10852f15b8f467", "parents": [ "6cd84b78edc6f35b01603f85d8769cbb6c568306" ], "author": { "name": "Sakari Ailus", "email": "sakari.ailus@maxwell.research.nokia.com", "time": "Wed Feb 24 19:19:05 2010 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed May 19 12:58:06 2010 -0300" }, "message": "V4L/DVB: V4L: Events: Add new ioctls for events\n\nThis patch adds a set of new ioctls to the V4L2 API. The ioctls conform to\nV4L2 Events RFC version 2.3:\n\n\u003cURL:http://www.spinics.net/lists/linux-media/msg12033.html\u003e\n\nSigned-off-by: Sakari Ailus \u003csakari.ailus@maxwell.research.nokia.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "35e6aa9fc38fb7f47f39711e52cb0f58fbf4441c", "tree": "ba420ac455a5a3937f631db24aac429dcbe9fa22", "parents": [ "aec11e5d495a6c9b10ded81dde5b0e42b0875541" ], "author": { "name": "Xiaolin Zhang", "email": "xiaolin.zhang@intel.com", "time": "Sun Apr 18 23:06:50 2010 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed May 19 12:58:03 2010 -0300" }, "message": "V4L/DVB: core: add support for more color effects\n\nAdd support for more color effects (negative, sketch, emboss, etc) by\nextending the v4l2_colorfx enum items.\n\nSigned-off-by: Xiaolin Zhang \u003cxiaolin.zhang@intel.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "c683357236969c48f7b945fd718f141bf36e8ba2", "tree": "61d2b3f792582861d193520d3526611334c0c625", "parents": [ "eb78deecb496a8b0888d24f1cfa73f6e907b82e2" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed Apr 21 11:36:57 2010 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed May 19 12:57:48 2010 -0300" }, "message": "Revert \"V4L/DVB: Add FE_CAN_PSK_8 to allow apps to identify PSK_8 capable DVB devices\"\n\nPatch reverted per Andreas Oberritter \u003cobi@linuxtv.org\u003e request. It is basically\nnot ready yet for upstream merge.\n\nThis reverts commit 77b2ad374a82e3d740cb1780ff4caedc3e051b37.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "b187913c77adbd865194c6b8072764e3474d56ea", "tree": "762cc4963dfb732daa0b8c3e8fbd4ad1b555aada", "parents": [ "dd3f616d4b60a50328be152f66c93bd451461a39" ], "author": { "name": "Klaus Schmidinger", "email": "Klaus.Schmidinger@tvdr.de", "time": "Sun Apr 11 06:12:52 2010 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed May 19 12:57:47 2010 -0300" }, "message": "V4L/DVB: Add FE_CAN_PSK_8 to allow apps to identify PSK_8 capable DVB devices\n\nThe enum fe_caps provides flags that allow an application to detect\nwhether a device is capable of handling various modulation types etc.\nA flag for detecting PSK_8, however, is missing.\nThis patch adds the flag FE_CAN_PSK_8 to frontend.h and implements\nit for the gp8psk-fe.c and cx24116.c driver (apparently the only ones\nwith PSK_8). Only the gp8psk-fe.c has been explicitly tested, though.\n\nSigned-off-by: Klaus Schmidinger \u003cKlaus.Schmidinger@tvdr.de\u003e\nTested-by: Derek Kelly \u003cuser.vdr@gmail.com\u003e\nAcked-by: Manu Abraham \u003cmanu@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "ea64f8c2204cd8b9a95072c7ef85cc9a120a2693", "tree": "9c1bf22ddee14ec28fd78ae82fe95652944c4279", "parents": [ "860553023bfed0179b3fe5d01838635f54a314a3" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Tue Apr 06 06:53:57 2010 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed May 19 12:57:06 2010 -0300" }, "message": "V4L/DVB: videodev2.h: move definition of enum v4l2_ctrl_type to the other control types\n\nFor some reason the definition of enum v4l2_ctrl_type is far from the\nplace where it is actually needed. This makes it hard to work with this\nheader.\n\nMove it to just before struct v4l2_queryctrl, which is the one that\nactually uses it.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "2ec8c6bb5d8f3a62a79f463525054bae1e3d4487", "tree": "fa7f8400ac685fb52e96f64997c7c682fc2aa021", "parents": [ "7b39f90fabcf9e2af0cd79d0a60440d821e22b56", "537b60d17894b7c19a6060feae40299d7109d6e7" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue May 18 23:01:55 2010 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue May 18 23:01:55 2010 -0700" }, "message": "Merge branch \u0027master\u0027 of /home/davem/src/GIT/linux-2.6/\n\nConflicts:\n\tinclude/linux/mod_devicetable.h\n\tscripts/mod/file2alias.c\n" }, { "commit": "c4fd308ed62f292518363ea9c6c2adb3c2d95f9d", "tree": "d6b4e36159e502a43a91ade86379703442204fc5", "parents": [ "96fbeb973a7e17594a429537201611ca0b395622", "1f9cc3cb6a27521edfe0a21abf97d2bb11c4d237" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 09:28:04 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 09:28:04 2010 -0700" }, "message": "Merge branch \u0027x86-pat-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027x86-pat-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86, pat: Update the page flags for memtype atomically instead of using memtype_lock\n x86, pat: In rbt_memtype_check_insert(), update new-\u003etype only if valid\n x86, pat: Migrate to rbtree only backend for pat memtype management\n x86, pat: Preparatory changes in pat.c for bigger rbtree change\n rbtree: Add support for augmented rbtrees\n" }, { "commit": "cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea", "tree": "0f359975ccad4ac72e86b8edf1924c076e74bd89", "parents": [ "98f01720cbe3e2eb719682777049b6514e9db556", "c59bd5688299cddb71183e156e7a3c1409b90df2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 09:17:01 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 09:17:01 2010 -0700" }, "message": "Merge branch \u0027core-hweight-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027core-hweight-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86, hweight: Use a 32-bit popcnt for __arch_hweight32()\n arch, hweight: Fix compilation errors\n x86: Add optimized popcnt variants\n bitops: Optimize hweight() by making use of compile-time evaluation\n" }, { "commit": "98f01720cbe3e2eb719682777049b6514e9db556", "tree": "af2fc4642dd0bfd195b0f60f1f267e8b02aa0009", "parents": [ "41d59102e146a4423a490b8eca68a5860af4fe1c", "4f47b4c9f0b711bf84adb8c27774ae80d346b628" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 09:15:57 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 09:15:57 2010 -0700" }, "message": "Merge branch \u0027x86-irq-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027x86-irq-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86, acpi/irq: Define gsi_end when X86_IO_APIC is undefined\n x86, irq: Kill io_apic_renumber_irq\n x86, acpi/irq: Handle isa irqs that are not identity mapped to gsi\u0027s.\n x86, ioapic: Simplify probe_nr_irqs_gsi.\n x86, ioapic: Optimize pin_2_irq\n x86, ioapic: Move nr_ioapic_registers calculation to mp_register_ioapic.\n x86, ioapic: In mpparse use mp_register_ioapic\n x86, ioapic: Teach mp_register_ioapic to compute a global gsi_end\n x86, ioapic: Fix the types of gsi values\n x86, ioapic: Fix io_apic_redir_entries to return the number of entries.\n x86, ioapic: Only export mp_find_ioapic and mp_find_ioapic_pin in io_apic.h\n x86, acpi/irq: Generalize mp_config_acpi_legacy_irqs\n x86, acpi/irq: Fix acpi_sci_ioapic_setup so it has both bus_irq and gsi\n x86, acpi/irq: pci device dev-\u003eirq is an isa irq not a gsi\n x86, acpi/irq: Teach acpi_get_override_irq to take a gsi not an isa_irq\n x86, acpi/irq: Introduce apci_isa_irq_to_gsi\n" }, { "commit": "07d77759c95d899b84f8e473a01cff001019dd5f", "tree": "d039fa6b38475868ebf2bd63ec14f49031d3f0b2", "parents": [ "b7723f9d21d8d6043e63f5e3e412f321f5f1900c", "3998d095354d2a3062bdaa821ef07a1e1c82873c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 08:49:13 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 08:49:13 2010 -0700" }, "message": "Merge branch \u0027x86-cpu-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027x86-cpu-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86, hypervisor: add missing \u003clinux/module.h\u003e\n Modify the VMware balloon driver for the new x86_hyper API\n x86, hypervisor: Export the x86_hyper* symbols\n x86: Clean up the hypervisor layer\n x86, HyperV: fix up the license to mshyperv.c\n x86: Detect running on a Microsoft HyperV system\n x86, cpu: Make APERF/MPERF a normal table-driven flag\n x86, k8: Fix build error when K8_NB is disabled\n x86, cacheinfo: Disable index in all four subcaches\n x86, cacheinfo: Make L3 cache info per node\n x86, cacheinfo: Reorganize AMD L3 cache structure\n x86, cacheinfo: Turn off L3 cache index disable feature in virtualized environments\n x86, cacheinfo: Unify AMD L3 cache index disable checking\n cpufreq: Unify sysfs attribute definition macros\n powernow-k8: Fix frequency reporting\n x86, cpufreq: Add APERF/MPERF support for AMD processors\n x86: Unify APERF/MPERF support\n powernow-k8: Add core performance boost support\n x86, cpu: Add AMD core boosting feature flag to /proc/cpuinfo\n\nFix up trivial conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c and\ndrivers/cpufreq/cpufreq_ondemand.c\n" }, { "commit": "752f114fb83c5839de37a250b4f8257ed5438341", "tree": "c565c3b6670d21ad7f5cd6cdda5864a76d3f2e0c", "parents": [ "b8ae30ee26d379db436b0b8c8c3ff1b52f69e5d1", "ad56b0797e67df5e04b2f1a1e02900145c5c16f2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 08:35:04 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 18 08:35:04 2010 -0700" }, "message": "Merge branch \u0027tracing-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027tracing-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n tracing: Fix \"integer as NULL pointer\" warning.\n tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header\n tracing: Make the documentation clear on trace_event boot option\n ring-buffer: Wrap open-coded WARN_ONCE\n tracing: Convert nop macros to static inlines\n tracing: Fix sleep time function profiling\n tracing: Show sample std dev in function profiling\n tracing: Add documentation for trace commands mod, traceon/traceoff\n ring-buffer: Make benchmark handle missed events\n ring-buffer: Make non-consuming read less expensive with lots of cpus.\n tracing: Add graph output support for irqsoff tracer\n tracing: Have graph flags passed in to ouput functions\n tracing: Add ftrace events for graph tracer\n tracing: Dump either the oops\u0027s cpu source or all cpus buffers\n tracing: Fix uninitialized variable of tracing/trace output\n" } ], "next": "b8ae30ee26d379db436b0b8c8c3ff1b52f69e5d1" }