)]}' { "log": [ { "commit": "41f8fa330664879217c2fef2dd373446c9c650ca", "tree": "a284daa9b13276f41256e098c62433656a74eb53", "parents": [ "e0b55321970acbdefdeb5d2eff76ffd1b87861af" ], "author": { "name": "Sushmita Susheelendra", "email": "ssusheel@codeaurora.org", "time": "Wed May 11 17:15:58 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:02 2011 -0700" }, "message": "msm: kgsl: Add CFF user event ioctl to write data to cff dumps\n\nAdd the ioctl IOCTL_KGSL_CFF_USER_EVENT to write data to cff dump.\nDefine a new CFF packet cff_op_user_event for this generic user\nevent.\nWrite the surface parameter data packet and verify mem file\npacket to cff dumps\n\nSigned-off-by: Sushmita Susheelendra \u003cssusheel@codeaurora.org\u003e\n" }, { "commit": "33dc7b93d4fd73307bb8f68f8067cbe481c5bbcb", "tree": "62ff029fe47c0d19703c4b2648acae537c262dfa", "parents": [ "0e8a5ade33956340ae5afd604d042f39a7fc1237" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Thu Aug 18 16:16:12 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:01 2011 -0700" }, "message": "msm_fb: display: fix YCrCb planar input format support in mdp\n\nMDP hardware expects source addresses to be in YCbCr order, in order to\nsupport YCrCb, need to swap chroma planes addresses.\n\nCRs-Fixed: 302408\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "8b621e42799c3427c5080b9f9458e0b445dd05f5", "tree": "3c2bbf17fa68570d4b7b1342c17d735f8ed501bb", "parents": [ "a0101bac77ed3deb50291801211178d0fa4294b0" ], "author": { "name": "Praveena Pachipulusu", "email": "pveena@codeaurora.org", "time": "Wed Aug 10 18:17:07 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:00 2011 -0700" }, "message": "input: cyttsp-i2c: Change the permission of firmware sysfs entries\n\nCRs-fixed: 302911\nSigned-off-by: Praveena Pachipulusu \u003cpveena@codeaurora.org\u003e\n" }, { "commit": "0a0fe6a2a6bf9496373d73545b81a1f063399b6c", "tree": "11a659ca471a0af066c83ec5549d23c63243c8a8", "parents": [ "24161a643a3d3c491922871e4053bdae05f7cd09" ], "author": { "name": "Rajeshwar Kurapaty", "email": "rkurapat@codeaurora.org", "time": "Tue Aug 23 18:57:58 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:58 2011 -0700" }, "message": "vidc: 720p: Handle profile unknown as bitstream error.\n\nFor corrupted VOL header in the middle of playback\ncore is returning UNKNOWN PROFILE error and is being\ntreated as Fatal error and playback is getting aborted.\nNow handling it as sequence header fail/recoverable\nerror.\n\nCRs-Fixed: 302549\nSigned-off-by: Rajeshwar Kurapaty \u003crkurapat@codeaurora.org\u003e\n" }, { "commit": "60c9b4b05e80b5528b1220c6cdc71a54d8880f09", "tree": "1bb3e0b17decc28cf3018ac3ded6f910d54c9e1c", "parents": [ "5caa02c3ff4e5c4e692527e15598692855e4abc6" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Sun Aug 28 18:19:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:56 2011 -0700" }, "message": "Revert \"wcnss: Cancel Apps vote for Riva and Iris regulators once Riva is up\"\n\nThis reverts commit b120278042ddbccac9627186c3f691ff4614372e.\n\nSigned-off-by: Bryan Huntsman \u003cbryanh@codeaurora.org\u003e\n" }, { "commit": "5caa02c3ff4e5c4e692527e15598692855e4abc6", "tree": "ed17b9f2c2c97b840d923095cfe39fb0bd89640f", "parents": [ "b618ec2b43eba5c06c86e8faa4a48706aca7dc98" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 15 20:11:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:56 2011 -0700" }, "message": "mfd: pm8921-core: print restart reason\n\nlog the restart reason in the probe function.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "2f789d14b806e93137bea9416302029c7dfcc496", "tree": "bb69c76498cffed8ba061f7fd613aad914350772", "parents": [ "fbb46aabd35f4d4940b5e8471c015431b77db9ef" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Wed Aug 24 12:40:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:54 2011 -0700" }, "message": "msm: kgsl: stop forcing hw patchid to 0 for 8x60 and 8960\n\nThis field of the chip_id was forced to 0 because userspace\ngot confused when it was a different value. Userspace has\nbeen corrected to deal with the correct patch ids.\n\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "fbb46aabd35f4d4940b5e8471c015431b77db9ef", "tree": "194d949aaf375c7c0f67f4267cfd8e96b1b4f07d", "parents": [ "f058a440785ed1f3e4083b41065997317def8f9a" ], "author": { "name": "Sushmita Susheelendra", "email": "ssusheel@codeaurora.org", "time": "Thu Aug 25 18:05:08 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:53 2011 -0700" }, "message": "msm: kgsl: Fix ringbuffer command names\n\nThe prefix PM4_ was changed to CP_.\n\nSigned-off-by: Sushmita Susheelendra \u003cssusheel@codeaurora.org\u003e\n" }, { "commit": "8f13e5b3e465215538645405ac0c48daa9c2c558", "tree": "4fe93ce01208a3ce4b26a85cd7b1b73b4cbd493c", "parents": [ "b7f0284e061f148882af2cdd44266a9a4e9c4177" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Aug 04 21:15:11 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:51 2011 -0700" }, "message": "mmc: msm_sdcc: check MCLK_REG_WR_ACTIVE bit for register write completion\n\nWhen SW writes to MCI_POWER, MCI_CLK, MCI_CMD and MCI_DATA_CTL\nregisters, the register write operation is completed after\n3HCLK + 2 MCLK clock cycles. SW should access these registers\nonly after the register write operation is completed.\nThis synchronization delay can\u0027t be ignored, especially in case\nthe MCLK is slow (e.g. 400 KHz).\n\nSpecial status bit is defined to wait properly for register\nwrite completion bit MCLK_REG_WR_ACTIVE of MCI_STATUS2 register.\n\nSW should always wait until bit MCLK_REG_WR_ACTIVE of MCI_STATUS2\nregister is low after writing to one of mentioned above registers\nand before accessing them again.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "b7f0284e061f148882af2cdd44266a9a4e9c4177", "tree": "af7e013f25a2bdea3222140963dd70ff77f51bd3", "parents": [ "67f29373f604492d47ebdbadfd30a20debceed47" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Fri Aug 26 01:04:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:50 2011 -0700" }, "message": "wcnss: Cancel Apps vote for Riva and Iris regulators once Riva is up\n\nAcked-by: Kumar Anand \u003ckanand@qca.qualcomm.com\u003e\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "37ce38431e6ce538e853daea8d309d5195d9c607", "tree": "b099e7a7241d397e5bae20156ca71973e88440be", "parents": [ "62cf63ea8ef44c3bb893045f1d8b440d298e2e35" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 17 16:00:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:48 2011 -0700" }, "message": "msm: clock: Rename SDC clocks to match new naming convention\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "6fe50a87c3d0d4b2bf9e7ba9e8c2749b155c5bbe", "tree": "0ecb468f1879588b40ee9c6761de394e36232dd4", "parents": [ "26cef9c5c9191ab7bca6a23dbbbdca56d6db1690" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 25 21:33:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:47 2011 -0700" }, "message": "power: pm8921-charger: api to control input regulation\n\nThe pmic charger can take measures such as reducing charing\ncurrent if the input charger voltage falls below certain point.\nCreate api to use this feature.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "26cef9c5c9191ab7bca6a23dbbbdca56d6db1690", "tree": "7d2ccaf217835095a738774c1b5186721e8e8eba", "parents": [ "86eea3087349a7c9d73d69912fd10648ec7f1c03" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 25 19:16:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:46 2011 -0700" }, "message": "power: pm8921-charger: api to control trkl charging\n\nProvide mechanism to set trickle, weak voltage and currents via\nboard file. These settings are used to configure the hardware\ncontrolled auto trickle charging.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "86eea3087349a7c9d73d69912fd10648ec7f1c03", "tree": "5f18cd0bd862d65a9803a3ac07b0cbc2c557ec07", "parents": [ "93249a9485ee098b6e527e6f23dfc92686eb9e61" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 15 13:55:18 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:46 2011 -0700" }, "message": "power: pm8921-charger: implement temperature control\n\npm8921 has a special hardware to monitor the battery temperature. Use\nthis block to program the cool and warm thresholds and reduce charging\ncurrent accordingly.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "93249a9485ee098b6e527e6f23dfc92686eb9e61", "tree": "deaee21201b188e6b405f94d78acfe7a3d4f0da9", "parents": [ "48bc4ee915717166ad735d852bd52491494086ce" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Aug 09 14:28:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:45 2011 -0700" }, "message": "mfd: pm8921-adc: Add BTM thermistor table\n\nBTM (Battery Temperature Module) thermistor lookup\ntable is computed based on the resistor divider\u0027s\nused on the board and the specifications of the\nthermistor. Its a function of temperature vs the\nADC code for PM8921 ADC and is used to set the\ncool/warm thresholds on the BTM.\n\nCRs-Fixed: 299646\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "48bc4ee915717166ad735d852bd52491494086ce", "tree": "d9ceba6635b7fa440f903c2fcf42383b90b7c0ec", "parents": [ "8f972e5c91c3ff4f62852b65ae145c58d0e11118" ], "author": { "name": "Rajeshwar Kurapaty", "email": "rkurapat@codeaurora.org", "time": "Wed Aug 24 18:27:51 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:44 2011 -0700" }, "message": "vidc: 720p: Memset MPEG-4 recon buffers to black\n\nIn the case of MPEG-4 decoding with clips which have\ninitial frames starting with P-VOPs, green macroblocks\nare seen. This is because of recon buffers used for\nMPEG-4 have 0 preset values. The default values are\nchanged to 0x10 \u0026 0x80 for luma and chroma to get\ndefault color as black.\n\nCRs-Fixed: 303298\nSigned-off-by: Rajeshwar Kurapaty \u003crkurapat@codeaurora.org\u003e\n" }, { "commit": "8f972e5c91c3ff4f62852b65ae145c58d0e11118", "tree": "0a5b0c3833f8472a32641003d475df88ecc15052", "parents": [ "85c704939f8b167b0e8709fde7db5d8ee3e3384d" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Wed Aug 24 11:48:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:44 2011 -0700" }, "message": "radio: iris: fix the seek bug during FM TX\n\nThis patch fixes the issue we could not seek to\nanother station in the TX mode when RDS was enabled.\n\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "ac294855f68a2411b0283163de1c45994a509a73", "tree": "fbc09daa6de467a401e045fef2cc7e24efa9c693", "parents": [ "33dbc0052a6610c41fdb239e9e1aba9bac0ffa29" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 17 15:44:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:43 2011 -0700" }, "message": "msm: clock: Rename all I2C/SPI clocks to \u0027core_clk\u0027 or \"iface_clk\"\n\nDrivers should now use their device names to distinguish between\nclocks of the same type rather than the clock name.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-qrdc.c\n\tarch/arm/mach-msm/board-qt8660.c\n" }, { "commit": "be6bd8ce1ba1eab49caa79be898e947a38016e02", "tree": "b5857a00541931b1a3460ce787c7aa738b013f56", "parents": [ "b24e2c3810f6eca4f8007ca2082c940ad7fbf8d8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 19 12:15:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:39 2011 -0700" }, "message": "power: pm8921-charger: add support for invalid battery\n\nUse adc reading on the battery_id resistor to check if a battery\nis valid. If it is not disable charging.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "b24e2c3810f6eca4f8007ca2082c940ad7fbf8d8", "tree": "001e04f8cb0803b244899b9c9d9cc23a2d94dbf6", "parents": [ "485a053da3be033d26162c32329cec26aba68449" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 17 17:13:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:39 2011 -0700" }, "message": "power: pm8921-charger: various apis\n\nImplement API\u0027s to\n\t- set maximum battery charging current\n\t- disable drawing current from the source\n\t- detect if battery is being charged and which charger source\n\t is charging the battery\n\t- get battery temperature\n\t- detect battery is present\n\t- detect usb is present\n\t- detect dc is present\n\t- set max trickle charging time\n\t- set max auto charging time\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "485a053da3be033d26162c32329cec26aba68449", "tree": "9fbea7e2a293a4927fba0d559633a44ef1de901c", "parents": [ "e27d809933cddb44f5cf5a3d7b6efe1b7a46ad8b" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:18:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:38 2011 -0700" }, "message": "power: pm8921-charger: code cleanup\n\nCustomers of this driver wanted to log if the USB is over voltage or\nunder voltage. Add a print for such conditions.\n\nAlso change the name of the parameter to the pm_chg_iusbmax_set,\nto reflect it is the register value, not the current value.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "e27d809933cddb44f5cf5a3d7b6efe1b7a46ad8b", "tree": "8d60f00ad353f20e1315e85f95e2ffda75f38625", "parents": [ "71816fde13316655dc72baa6e85ee02e73336d0e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:16:29 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:38 2011 -0700" }, "message": "power: pm8921-charger: wakeup upon usb-insertion/removal\n\nWhen the usb is inserted the usb driver needs to be woken up for\nproper enumeration of the device. Mark usb related interrupts\nas wakeup interrupts.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "71816fde13316655dc72baa6e85ee02e73336d0e", "tree": "26924a324dc694d64ccd1e634072de80099eef89", "parents": [ "ad899705e71d5de65db9247d6d26ad109bff4e6c" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:14:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:37 2011 -0700" }, "message": "power: pm8921-charger: fix termination current\n\nThe driver was writing to SAFE current register instead of the\nTERM current register.\n\nFix it.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "2ca30356bd3e2db7de9df06670ff9ba2f6dfafe4", "tree": "78136b3d2f2c311b1afd88cb52c55cd78f1353ee", "parents": [ "7ee0dca520191ce1c838d3b081dc3ae62a510497" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Fri Jun 24 18:16:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:35 2011 -0700" }, "message": "msm_fb: display: Fix DSI PLL/clock warnings\n\nCRs-Fixed: 300073\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "d9df327068bbb5887ec534e4af111a8c3f0b1a0c", "tree": "7a55a85350c17efa746c98a7719199f72f615787", "parents": [ "0ec7618a6b06e937e1d71a4d66e79cd9c9fdf435" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Fri Aug 19 16:50:46 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:34 2011 -0700" }, "message": "mmc: changes to get SDCC work with multi-target binary for 8960 and 8064\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "f6c97c82cb71614a257197d398e36dff15be138a", "tree": "4b7cc6a26504eeacbf2a7b8b8880d8ee8befc0c8", "parents": [ "34ec3697c70452298045d63b0759b1ed491b6b6b" ], "author": { "name": "Oluwafemi Adeyemi", "email": "aadeyemi@codeaurora.org", "time": "Mon Aug 22 10:53:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:31 2011 -0700" }, "message": "mmc: msm_sdcc: Unconditionally send CMD52 after CMD53\n\nAlways send a dummy CMD52 after CMD53 for controllers\nearlier than SDCC4\n\nSigned-off-by: Oluwafemi Adeyemi \u003caadeyemi@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/configs/msm7627-perf_defconfig\n\tarch/arm/configs/msm7627_defconfig\n\tarch/arm/configs/qsd-chromeos-st1q-qrdc_defconfig\n\tarch/arm/mach-msm/board-qrdc.c\n\tchromeos/config/armel/config.flavour.chromeos-st1q-qrdc\n" }, { "commit": "1f52c4141cf9f2c5d6a32918d056f93ce3897ef6", "tree": "990f14c5ae8a6621766592f7db0035ac9a61974a", "parents": [ "57dcfff1206da4b1f6e3cdbbc63b5c27d57ded24" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:11:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:29 2011 -0700" }, "message": "power: pm8921-charger: add enable/disable api\n\nAdd api to enable/disable battery charging. This api will help\nstart/stop current flowing in the battery for charging purposes, but\nit does not affect the current the device draws from a charger source.\n\nCRs-Fixed: 300786\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "57dcfff1206da4b1f6e3cdbbc63b5c27d57ded24", "tree": "1e9224075c4bbc0b7fee3c68b9f60febc61adae6", "parents": [ "7f7de4f8f82ca83c74a8b8b1892ab1a48fd9e7e2" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Wed Aug 24 14:34:46 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:29 2011 -0700" }, "message": "msm_fb: display: synchronous UI and Video thread\n\nUse mutex to synchronous between UI and Video thread.\nMeanwhile, add yield() when at end of frame push of\nUI thread to prevent UI thread from dominating cpu times.\n\nCRs-fixed: 303246\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "7f7de4f8f82ca83c74a8b8b1892ab1a48fd9e7e2", "tree": "091ce9cf90fafaad458eca77fd9f0b901bd4f541", "parents": [ "3652ed735ca19effa968b363b3d64750c41da042" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Jul 27 10:29:01 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:28 2011 -0700" }, "message": "8060: wlan: Enable wlan on dragonboard\n\nDifferent values for pin_controlled need for dragonboard\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "6061bc76edc2be9f0b0d99d8fe66a2ecf92b4ed1", "tree": "a0e8655d5db606a2fd7e71667bbbce69b84ce828", "parents": [ "a7423e433ea5736234c40e0341d7451af9a8fc15" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Mon Apr 18 15:23:16 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:26 2011 -0700" }, "message": "msm: kgsl: add MEMORY_BASE and HANG packets\n\nThese are changes to the cffdump output format.\nMEMORY_BASE reports the address range we\u0027re using at the start\nof the dump, which helps the postprocessors validate memory\nwrites.\n\nHANG is emitted at the start of kgsl_postmortem_dump(), and can\nbe used by the postprocessors to stop when the hang occurs.\n\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "a7423e433ea5736234c40e0341d7451af9a8fc15", "tree": "9f6b494c60420f55dee8c03c451de4647d03a697", "parents": [ "f23a2316e6ccd335f2559b354812aad3f1b2b25b" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Mon Apr 18 15:11:21 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:26 2011 -0700" }, "message": "msm: kgsl: cffdump syncmem ioctl\n\nThis ioctl is needed to track memory writes done from userspace\nso that this data is correctly captured in the dump.\n\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "5dcf31ca65ed265082278245d956b28bb31e8a8a", "tree": "5ece72ecff979fa714923f02c8c79523c6529429", "parents": [ "8afd564fade04ecc7151a5d5e9f7a58d87c66ac7" ], "author": { "name": "Jilai Wang", "email": "jilaiw@codeaurora.org", "time": "Wed Aug 24 10:08:35 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:22 2011 -0700" }, "message": "msm: camera: enable VX6953 Sensor on msm7x30 platform\n\nVX6953 sensor is disabled because of a typo in KConfig file.\nCorrect the typo to enable it.\n\nSigned-off-by: Jilai Wang \u003cjilaiw@codeaurora.org\u003e\n" }, { "commit": "72407e986ccbb768b85a1d58df1c4a0d0cbbcecf", "tree": "d282be00ac733e3fc40943f78e27653d39c8cae3", "parents": [ "4613ce4c372d594e14b8cd60af4c14ad09ab8497" ], "author": { "name": "Chuanxiao Dong", "email": "chuanxiao.dong@intel.com", "time": "Wed Aug 24 14:00:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:21 2011 -0700" }, "message": "mmc: remove MMC bus legacy suspend/resume method\n\nMMC bus suspend/resume was using legacy method. In system entering\nS3 patch, the suspend/resume function cannot be called since MMC\nbus also implemented the new suspend/resume method (dev_pm_ops struct).\nSo if dev_pm_ops is defined but .suspend/.resume callbacks not implemented,\nmmc_queue will not be suspended/resumed.\n\nThis patch will remove the legacy suspend/resume method and change to\nuse the new method totally.\n\nSigned-off-by: Chuanxiao Dong \u003cchuanxiao.dong@intel.com\u003e\nSigned-off-by: Sujith Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "13dcf554d95c955e0110488d0a6ba604ec3db6be", "tree": "27f26ea3b81817d28b8b3cecdefac00873cd817d", "parents": [ "ab2754e472a55b271d3d47e75624835008b83a82" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Mon Aug 22 15:38:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:20 2011 -0700" }, "message": "input: cyttsp-i2c: Reduce time needed to resume from sleep\n\nReduce the number to attempts to move out of bootloader\nmode.\n\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "ab2754e472a55b271d3d47e75624835008b83a82", "tree": "5ac78d601ee5d968f7615b1bf65377127d5dba22", "parents": [ "b62d92afa8fe96510dabb97a77f6ff3775f2b154" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Aug 22 12:39:31 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:19 2011 -0700" }, "message": "input: cyttsp-i2c: Improve error handling in bootloader mode\n\nAttempt multiple I2C writes (in case of failures) to get the\ndevice out of bootloader mode.\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "7887c510b7a08df535917323d7204fa219367fce", "tree": "91252ceb473601a4395930f5dd20cdc49eb479d4", "parents": [ "74a13cbe503db1864058962a9d4099568a1f5701" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Tue Aug 23 16:59:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:18 2011 -0700" }, "message": "platform-drivers: msm: sps: use spin_lock_irqsave for SPS driver\n\nUse spin_lock_irqsave to prevent the deadlock caused by SoftIRQ\n\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" }, { "commit": "a11be9ee591a7271d3a94179041a612370396ff8", "tree": "80b3843da74053976b19b7affc59a20dc605e519", "parents": [ "cc62b1cce23459f8074f71567e9fe0f1e64c991b" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Aug 23 08:52:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:17 2011 -0700" }, "message": "regulator: pm8921-regulator: correct 100 mA LVS pull down setting\n\nThe pull down enable bit of the 100 mA LVS control register was set\nthe same way as those in LDO and SMPS regulators. I.e. set to 1 to\nenable the pull down and set to 0 to disable it. However, the pull\ndown bit meaning for 100 mA LVS\u0027s is inverted. Correct this in the\ndriver.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "cc62b1cce23459f8074f71567e9fe0f1e64c991b", "tree": "27612f8303f84f2c4d5fa7aac485b5d7a4e94da9", "parents": [ "b7f53dc2dac84df9754f46bb1249e4aed3ff46d5" ], "author": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Mon Aug 22 19:15:29 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:16 2011 -0700" }, "message": "radio:iris:Fix for regional band settings issue\n\nThis patch fixes the bug where the regional band settings were\noverwritten by default settings.\nAnd also sets proper high and low band limits\nfor Japan band.\n\nSigned-off-by: Srinivasa Rao Uppala \u003cuppalas@codeaurora.org\u003e\n" }, { "commit": "b7f53dc2dac84df9754f46bb1249e4aed3ff46d5", "tree": "65c0f22bb502b327cef8a0528b5433ef6fc38542", "parents": [ "2d31d27a3a1810d6d55991f4daea3af5812e3d90" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Tue Aug 23 12:40:33 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:16 2011 -0700" }, "message": "USB: gadget: Remove spoof disconnect workaround in ci13xxx_msm\n\nThe spoof disconnect workaround puts PHY in non-driving mode after\npull-up is disabled. Some times pull-up is not getting enabled when\nPHY is in non-driving mode. As this workaround is not applicable for\n28-nm PHY, remove it.\n\nCRs-Fixed: 302394\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "2d31d27a3a1810d6d55991f4daea3af5812e3d90", "tree": "dcfc457f8e40eae5258131fc26bcb78c2d5631da", "parents": [ "70dc7cfdae8ce23d7c6184add238319bf622270c" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri Aug 19 13:32:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:15 2011 -0700" }, "message": "msm: camera: Add new function to msm_camera_i2c\n\nAdd new function to handle device settings with varying data length.\nSensor vendors usually give us settings with consistent data length,\netc. group of byte or groups or word.\nThis new structure and function will handle cases when the data length\nchanges often.\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "f94bcc6852eae1a1623388b16833569c985e2998", "tree": "6359ca1cc7d2bc698d517bea38a1192fa9261cc1", "parents": [ "611d0d9e5b51f9e9906c956b619a91a35964210d" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Mon Aug 22 15:23:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:14 2011 -0700" }, "message": "msm: camera: add config identifier to control command structure.\n\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\n" }, { "commit": "d0c032ba6921da7a83b3d7356f5ee13ae3085c21", "tree": "b2f80cad833f0885330892821eecabe20938b287", "parents": [ "ce65086d12f309762659c1684d94f0869727f725" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Mon Aug 22 08:46:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:12 2011 -0700" }, "message": "crypto: Fix memory allocated for ignoring data\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "ce65086d12f309762659c1684d94f0869727f725", "tree": "77dc43de61dca616e3b75db1daef1b4b8a222967", "parents": [ "a00149c36cb1335c587eac6d110662bc2b2598d3" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Wed Aug 17 15:27:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:12 2011 -0700" }, "message": "camera: Export msm_isp.h to user space.\n\nThe header would hold command IDs and ISP message IDs,\nwhich can be used by user space code.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "a39d1d4a489a3a530727c0c2d1745c25e0426e71", "tree": "e66944d60c81717c51a75f123498e83d851e6736", "parents": [ "e4763a14f1c49a4c0dd3bb6c9abd9f68d8d75184" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Fri Aug 19 13:54:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:10 2011 -0700" }, "message": "leds: pm8xxx: fix issues in pm8xxx_led_config\n\nLED mode set through pm8xxx_led_config API should be forced, not\nOR\u0027ed with the old value. For manual mode the brightness setting\nshould be done by LED trigger, not being turned on by default.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "8ba5181216fac0de8e27795156178423dcab89d7", "tree": "775cbed0d8168048bcdcc8c179a469997c39507a", "parents": [ "0b8dbd0db915e6d57dbcc7eca27bddd9253b94f6" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Aug 03 22:30:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:08 2011 -0700" }, "message": "mfd: pm8921-adc: Fix kmemleak in probe\n\nRemove kmem allocation for adc channel list and use\nthe data through the platform data.\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "e252237237dd9a482ea75a7fd29ebd443ec4eb35", "tree": "0dfc68e9e1047ae7b82dcd8c102eff652fae6589", "parents": [ "688c66a4c2ba7134b68dc026621704397ea6fed4" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 17 14:52:21 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:07 2011 -0700" }, "message": "msm: clock: Rename all UART clocks to \u0027core_clk\u0027 or \u0027iface_clk\u0027\n\nDrivers should now use their device names to distinguish between\nclocks of the same type rather than the clock name.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "72029d6bca598b3f8af4f280ee06145caede049f", "tree": "f3ee45540457fb2d92fd8e85c9c92ec77f566b71", "parents": [ "7706e8ed9792c55922365d819a7a5fc22133cbbd" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Tue Aug 23 17:08:55 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:04 2011 -0700" }, "message": "msm_serial_hs_lite: Enable clocks when adding the port\n\nEnable the GSBI bus clock when calling uart_add_one_port in\nthe probe function to allow a clean transition from the\nearly console to the regular console. The TTY layer may try\nto configure the port before the early console became\ndeactivated, which will prematurely disable the clocks and\ncause a lockup.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "f5a4bbe4a0f1a8a300dd6651084fe0e74a592a74", "tree": "c3e5bd1228cc6427c8635f9f6d5cffdae6ccc0d7", "parents": [ "3043fbaf3c938e70c6a5f587f86f6b653becc3c3" ], "author": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Tue Jul 05 19:16:39 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:01 2011 -0700" }, "message": "input: cy8c_ts: Add support for TMA340 TS controller\n\nThis controller uses the same packet format as TMA300\n\nSigned-off-by: Zhang Chang Ken \u003ckenz@codeaurora.org\u003e\n" }, { "commit": "8605fcaa4fba772b1248f082795343c43c30cad7", "tree": "bd1574376fa4f6ab17142408187c2a484626509a", "parents": [ "2e099a00c756d378529fa4014355f0e7573bf409" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Mon Aug 22 15:39:19 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:58 2011 -0700" }, "message": "mmc: msm_sdcc: Fix issue with SDCC runtime suspend/resume framework\n\nBelow is the problematic scenario that this patch fixes -\n\nThe SDCC host is runtime suspended and the system suspend\nhas began. Before starting suspend of all devices, the usage\ncounter is incremented by power management framework. Now, MMC\nblock device is suspended as part of devices suspend but before\nsuspend of SDCC host, suspend is aborted because of some other\ndevice. In this case, resume is called for all suspended devices\nbut the counter is not yet decremented. So when MMC block resume\nis called and when it tries to resume the host, it fails. This is\nbecause the current msmsdcc_enable() code resumes only when device\nusage counter is 0. This code is now changed to use\npm_runtime_suspended() to determine when to resume the device.\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "2e099a00c756d378529fa4014355f0e7573bf409", "tree": "7d2f6e96a1b277f66659aa1e2c10292290e9fdac", "parents": [ "7fe62a3d10a22a50a9c82ace1bb7300f1f858e06" ], "author": { "name": "Anji jonnala", "email": "anjir@codeaurora.org", "time": "Fri Aug 19 12:48:01 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:57 2011 -0700" }, "message": "USB: EHCI: Unlink the pending async queue heads explicitly in ehci_stop\n\nIs is observed that ehci-\u003easync-\u003eqh_next ptr is not getting freed up\nwhich is causing crash in ehci_mem_cleanup function. As a temporary\nworkaround unlink the pending queue heads as a part of ehci_stop.\n\nCRs-fixed: 301134\n\nSigned-off-by: Anji jonnala \u003canjir@codeaurora.org\u003e\n" }, { "commit": "7fe62a3d10a22a50a9c82ace1bb7300f1f858e06", "tree": "e33a5d7c2135b57a9bee609a9fe0bd9e35d8956b", "parents": [ "1ea7d8a6ae90c41e0d57268096403f1827055b49" ], "author": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Thu Jul 14 16:40:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:57 2011 -0700" }, "message": "msm: kgsl: add gpu busy stats to sysfs\n\nSigned-off-by: Suman Tatiraju \u003csumant@codeaurora.org\u003e\n" }, { "commit": "d880c704a91e2ad56514e5deee20dd194576cc0c", "tree": "7368190634779440951e9aebcb2c3bbdd7efbda0", "parents": [ "9ad6d836808450be1e8284b67ff8f3ea33e6f09a" ], "author": { "name": "Ananda Kishore", "email": "kananda@codeaurora.org", "time": "Thu Jun 23 15:19:31 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:56 2011 -0700" }, "message": "vdec: 720p: deblocking filter enabled for Divx and XVID\n\nDefault deblocking filter is enabled for Divx 4,5,6 and XVID.\n\nSigned-off-by: Ananda Kishore \u003ckananda@codeaurora.org\u003e\n" }, { "commit": "9ad6d836808450be1e8284b67ff8f3ea33e6f09a", "tree": "93352f509d62926196496332fc61daec15262ec3", "parents": [ "bea4783bcd4a65f11a6c5c00995a04dcea72c002" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Fri Aug 19 11:58:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:55 2011 -0700" }, "message": "power: pm8921-charger: add POWER_SUPPLY_PROP_ONLINE for USB and AC\n\nAdd POWER_SUPPLY_PROP_ONLINE for non battery supply like USB and AC\nso that it can be used by power supply driver.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "bea4783bcd4a65f11a6c5c00995a04dcea72c002", "tree": "4c7354b9c465eb6d45fd5cec6a5521bf1c4fec25", "parents": [ "45b351ce7507c8b1bf4838b91c248327bd63a652" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Mon Aug 15 10:49:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:55 2011 -0700" }, "message": "msm-fb : display: foot switch control for the mdp driver\n\nadds the support for disable/enable the mdp foot switch at\nsuspend/resume boundaries\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "727225f609791168016d9d7facae7a2cfdfce4f4", "tree": "d8aa5f424cf78516b878a7d8c0c251d29dad9d43", "parents": [ "ce1315aabcedc29e64b6719cfc963064a1780b4c" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu Aug 18 11:09:49 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:53 2011 -0700" }, "message": "input: cyttsp-i2c: Add support for disabling ghost touch detection\n\nAdd support to treat ghost touches as normal touches incase firmware\nreports all touches as ghost touches.\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "3a8b8514533d94af2e9fcb4b215f968f07d14253", "tree": "6e3071ae4ea2038d53ab0044857a230c799e6a26", "parents": [ "fab9ae9d9b4034699734d416914da0efc8139b34" ], "author": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Thu Aug 04 18:41:39 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:52 2011 -0700" }, "message": "msm:8060: lcdc nt35582 panel support\n\nSigned-off-by: Zhang Chang Ken \u003ckenz@codeaurora.org\u003e\n" }, { "commit": "fab9ae9d9b4034699734d416914da0efc8139b34", "tree": "7349585e07bee7e880535742ab2ef27ec6911551", "parents": [ "44d4d2799620ed14fa484275b47f09020f6b61ee" ], "author": { "name": "Peter Lohmann", "email": "plohmann@codeaurora.org", "time": "Fri Aug 05 16:51:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:51 2011 -0700" }, "message": "mfd: wcd9310: Give the slimbus slave time to report present.\n\nSigned-off-by: Peter Lohmann \u003cplohmann@codeaurora.org\u003e\n" }, { "commit": "ffdf530c311822ae5ef3a06f285357a4e4702724", "tree": "1c2cf0d1e79fdcfd481b2cccd5227380b8eb97fe", "parents": [ "6ea0dcbf34d85d025774e38223be8e6156cdf728" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Wed Aug 17 20:54:34 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:50 2011 -0700" }, "message": "msm_serial_hs_lite: Correct AUTO RFR Level value\n\nMR1 register (AUTO_RFR_LEVEL) programming value is considered in\nWords for UARTDM Core, whereas it is considered in Bytes for UART\nCore. Currently MR1 register is programmed for AUTO_RFR_LEVEL value\nas 3/4 size of Rx FIFO size i.e. 48 Bytes. For UARTDM Core this\nvalue needs to configure into Words. Hence programme AUTO_RFR_LEVEL\nvalue using MR1 register as 12 instead of 48.\n\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "cf5f20e114ebbcd1609bcf880842e057c3566971", "tree": "263aceb7bdae10b8460d35432f9625e33a8cc5eb", "parents": [ "1316308eb30c2745c9b7a9b41017ceccc86315b5" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Mon Aug 22 12:29:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:47 2011 -0700" }, "message": "diag: Poll SMD control channel for data after USB connects\n\nDIAG uses SMD control channels to transfer packet registration\ninformation from slave processors. While USB is disconnected, under\nsome scenarios, the SMD data might be left unread. Hence, when USB\ngets connected, a special effort has to be made to read any unread\ndata on SMD control channel. Also each time a registration information\nis stored in diag table, the SMD channel needs to be polled once more.\n\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "1316308eb30c2745c9b7a9b41017ceccc86315b5", "tree": "83887b90039592ecde1dddcdf331291b619da8b4", "parents": [ "a7a1c6b3d50e8a1e658dda6f18949c521b72c9a4" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Tue Aug 09 10:17:06 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:46 2011 -0700" }, "message": "msm_charger: Allow parameters to select default charger type\n\nAdded method to msm_charger to allow programming of max source\ncurrent. Created struct for platform data to be passed into\npmic8058_charger\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "a7a1c6b3d50e8a1e658dda6f18949c521b72c9a4", "tree": "5656c4e8c3248b3fa0e4eec67071b98ca731a365", "parents": [ "f0b51cd8ba6bb484a41f15abdbc6b0f71cf70fe2" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 17 10:04:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:46 2011 -0700" }, "message": "power: pm8921-bms: fix division error\n\nArithmetic conversion rules states that a signed operand is converted\nto unsigned if the other operand is unsigned.\n\nThe voltage across vsense is a signed int and it can be negative.\nDividing it by the battery sense resistor, an unsigned int, was\nresulting in a very large positive number instead of a negative number.\n\nFix it by casting the battery sense resistor to signed so that a\na signed division is performed.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "f0b51cd8ba6bb484a41f15abdbc6b0f71cf70fe2", "tree": "411285a603ceee5a305a5969d3a0a5debe0702b6", "parents": [ "e258cf07bd95422f2b73c8c0cb183bd5b71942ee" ], "author": { "name": "Sachin Shah", "email": "sachins@codeaurora.org", "time": "Thu Aug 11 11:54:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:45 2011 -0700" }, "message": "tzcom: Turn some debug messages to error and warning\n\nSigned-off-by: Sachin Shah \u003csachins@codeaurora.org\u003e\n" }, { "commit": "a3c1a12a6ae1cd16b9105417954b0128df1ead97", "tree": "2c0ee58cc3eda5531a7836c0fc0153bd2a8f06d1", "parents": [ "1d9207484a3ec4e0c344399235a1dead45c389fe" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Thu Aug 04 15:33:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:41 2011 -0700" }, "message": "camera: v4l2: Make ISPIF a v4l2 subdev.\n\nThis makes it easier to control stream on/off using ISPIF\ninstead of CAMIF. RDI streaming/snapshot also becomes a\npossibility.\n\nNote that this change still turns on PIX0 streaming right\nafter ISPIF configuration. This is because ISPIF streamon\nneeds to happen before sensor streamon, and right now sensor\nstream is turned on before configuring VFE pipeline.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "9b92ccd290b28ea69b6f5447813b750c99c5f793", "tree": "9b49766154c177adecee993b2b386e1d87a50d08", "parents": [ "24a06d05adbf9470a4d00589ee7acc936ac5a5e3" ], "author": { "name": "Tarun Karra", "email": "tkarra@codeaurora.org", "time": "Fri Aug 19 10:59:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:40 2011 -0700" }, "message": "msm: kgsl: Changed variable type from unsigned int to long\n\nChanged variable \"result\" type from unsigned int to long\nto accurately reflect the result of macro wait_event_interruptible_timeout\n\nSigned-off-by: Tarun Karra \u003ctkarra@codeaurora.org\u003e\n" }, { "commit": "d90ea0e597f3e9563983981c42ee49106f7cf6c6", "tree": "4a279463c0817fe16e434f2ecab1582b70b33ee0", "parents": [ "6a8057c009fd3165fd989c884942b6f5e9bfc7ff" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Thu Aug 11 16:51:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:38 2011 -0700" }, "message": "crypto: Add support for 32KB+ packets in QCE\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "270813aace6f99b5d6b3515b581a0c40ffee771f", "tree": "12a39b2b1f540ae20452261b33395060950afec1", "parents": [ "feee40a7d6e6f8ce0c3e84d0b50ef562206ccfa1" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Wed Aug 10 17:23:18 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:36 2011 -0700" }, "message": "msm: code clean up of the existing improper event implementation\n\nCurrent implementation has a bug in v4l2 event subscription.\n\nAlso it is good to make the kernel to be transparent\nto those notification events from daemon to HAL.\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "feee40a7d6e6f8ce0c3e84d0b50ef562206ccfa1", "tree": "1d010a612933cd30754f2a6b82042e3dba234def", "parents": [ "a691a954323ea381b223e28659853bcba3a04394" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Wed Aug 17 00:57:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:36 2011 -0700" }, "message": "msm: camera: Camera i2c utility file\n\nMoved i2c utility functions to msm_camera_i2c files from\nmsm_sensor file, so that it can be used by other camera sub device\ne.g. flash and actuators\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "57ac1aca782870d66d79e82fe23c0bb6f19eca07", "tree": "eef864ec9f67a93b2a318d796c33679ee7beb7dc", "parents": [ "b479f0fe04493d8ee0d6b293df3f6c82c25751f5" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Sat Aug 06 15:12:44 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:34 2011 -0700" }, "message": "qup_i2c: Make sure QUP core is in RESET before disabling clocks\n\nIf dynamic HW gating is enabled, it\u0027s required to have the QUP core\nin RESET state before HW gating can take effect.\n\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "9cb21753fdb41af317438d177e28a5071b8a15dc", "tree": "e488cf2007afcc10ff1fc4b812bca1d4fc331931", "parents": [ "d5315bd98102b8a2f8e36bbd69b15b679dc43e84" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Mon Aug 08 16:14:53 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:33 2011 -0700" }, "message": "USB: msm_gadget: Implement timer based solution to check priming status\n\nEndpoint is not getting primed some times though dQH is setup properly.\nThe current code waits in a busy loop to determine if re-priming is\nrequired. This leads to high CPU usage. As the occurrence of this issue\nis very rare, use a timer to determine if priming is required. The timer\nis deleted whenever a dTD on that endpoint is retired. So the timer\nhardly expires. Add a debugfs file to show how many times prime failure\nhappened.\n\nCRs-Fixed: 298265\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "d5315bd98102b8a2f8e36bbd69b15b679dc43e84", "tree": "a31236d45297acd0a762e759f1b0ee6a94c2d4bc", "parents": [ "44cbeb74acde740965c4e7e38ccecc0d5a66a12f" ], "author": { "name": "Abhishek Kharbanda", "email": "akharban@codeaurora.org", "time": "Wed Aug 10 19:45:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:33 2011 -0700" }, "message": "msm_fb: [HDMI_COMPLIANCE] Enable Audio for HDMI Compliance\n\nEnable Audio event for NON-HDCP builds required for HDMI Compliance\nCases.\n\nSigned-off-by: Abhishek Kharbanda \u003cakharban@codeaurora.org\u003e\n" }, { "commit": "44cbeb74acde740965c4e7e38ccecc0d5a66a12f", "tree": "e8479b42b1110e774eb18818c2202d3bc4913757", "parents": [ "28e99c8edbad0d0305381deb1574750e30a1a770" ], "author": { "name": "Tarun Karra", "email": "tkarra@codeaurora.org", "time": "Thu Aug 18 13:30:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:32 2011 -0700" }, "message": "msm: kgsl: changed strncat to strlcat\n\nChanged strncat to strlcat to pervent buffer overflow.\n\nSigned-off-by: Tarun Karra \u003ctkarra@codeaurora.org\u003e\n" }, { "commit": "28e99c8edbad0d0305381deb1574750e30a1a770", "tree": "94e175b06556900aafbbe87b07e7c6e91ab5a307", "parents": [ "13b74aba08719655281a769c12484df706e33d5d" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Aug 18 17:23:10 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:32 2011 -0700" }, "message": "msm: kgsl: Use the first command to initiate busy\n\nThere may be multiple command submissions per-frame. Start your\nbusy count only on the first one.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "5e9346c656de26cadb3cc1753bb27c06fb5ef93b", "tree": "f6c40396bebf5ffab27f7cb3e2f95549be1a52ac", "parents": [ "cb12a106907ddd8c473f911ef3111c964d197738" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Tue Aug 16 14:09:18 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:30 2011 -0700" }, "message": "usb: gsmd: Add support for SMD close event\n\nSMD can generate close event when modem sub-system restart. Clean\nUSB buffers and drop the carrier detect during smd close.\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "e606a7b1e106868b786df0b912b1fda9e2d5084a", "tree": "f6bf6a77462d0427977c60d2e85b08ee9ef6bd33", "parents": [ "e52976fc8742c1734c3fda80735d0dfd21c61826" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Thu Aug 18 12:21:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:29 2011 -0700" }, "message": "usb: diag: Add NULL pointer check after ep_autoconfig\n\nep_autoconfig api can fail and return null endpoint. Add a\nnull pointer check after ep_auotconfig\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "e52976fc8742c1734c3fda80735d0dfd21c61826", "tree": "b0b433e320339a40f65e27d2c208b3c9dc682b31", "parents": [ "26f0556795a7018dbb794e4901b12949b4f2e66e" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Fri Aug 12 15:32:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:28 2011 -0700" }, "message": "msm_fb: display: use mutex instead of spin lock to avoid deadlock\n\nThere has deadlock between mdp4_isr() and disable_irq() called by\nLCDC thread. Disable_irq() will wait for mdp4_isr() to complete\nbefore return. Meanwhile mdp4_isr() will try to acquire mdp_spin_lock\nwhich had been acquired by lcdc thread before call disable_irq().\nThis patch replace spin lock with mutex to avoid deadlock from happening.\n\nCRs-fixed: 301276\nSigned-off-by: kuogee hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "ef391acc67018666527ff306574cc56f6d103481", "tree": "4150de38564a6e856c581bbfb97812033746647f", "parents": [ "48aef6d5c2dbe622a0c44440809f4860ff7a5770" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Aug 15 20:27:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:27 2011 -0700" }, "message": "msm: rotator: Don\u0027t control rot_axi_clk explicitly\n\nIt is now controlled implicitly along with the rotator core clock\nfor all SoCs.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "48aef6d5c2dbe622a0c44440809f4860ff7a5770", "tree": "a83d9ceeecb0613f6bee2431dc63016cb7e8cd40", "parents": [ "65ac922f58e3542edbc9c797a033d98e40891054" ], "author": { "name": "Pradeep Jilagam", "email": "pjilagam@codeaurora.org", "time": "Thu Aug 18 18:58:50 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:26 2011 -0700" }, "message": "msm_fb: display: Vote for AXI Clock for DSI on 7x27A\n\nVote for a minimum rate of 65 MHz for AXI Clock while using\nDSI interface on 7x27A\n\nSigned-off-by: Pradeep Jilagam \u003cpjilagam@codeaurora.org\u003e\n" }, { "commit": "f1071c0d57dc5e17b6121838e1f5ce8e49104293", "tree": "deb3d3ed15cb3cfb05176cb422abc3c3fa4cc9aa", "parents": [ "253ce1292f5383a8202ba219de8093681f830aa6" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Aug 09 19:39:36 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:25 2011 -0700" }, "message": "input: atmel-mxt-ts: Make USERDATA as writable object\n\nThe USERDATA object can be used to store user specific\ndata such as version info.\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "253ce1292f5383a8202ba219de8093681f830aa6", "tree": "1541ae6182b8167ab5f8414ce109760a34f5647c", "parents": [ "a498e4d8256962b431843504f5df288509be5f20" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Aug 09 19:32:57 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:24 2011 -0700" }, "message": "input: atmel-mxt-ts: Add earlysuspend support\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "a498e4d8256962b431843504f5df288509be5f20", "tree": "d58e20f2693683618c6a05ee516d5dfe7419305c", "parents": [ "d7b05e5bab087bac1b384623e2a4669b3c475424" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Aug 09 19:10:12 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:24 2011 -0700" }, "message": "input: atmel-mxt-ts: Add regulator support and init. callbacks\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "4ab97a9943c6eede62a4c62aedeac3ebbcc093d3", "tree": "88d1cc8a67308431111c722b9d14a8b15fa67db3", "parents": [ "974a40d3c133b78db7e99404873336638f3f17b0" ], "author": { "name": "Lakshmi Narayana Kalavala", "email": "lkalaval@codeaurora.org", "time": "Tue Jul 26 15:30:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:22 2011 -0700" }, "message": "msm: camera: Include Minimum Luma in Stats buffer\n\nInclude Minimum Luma Pixel value in Stats buffer\nfor AWB stats process.\n\nSigned-off-by: Lakshmi Narayana Kalavala \u003clkalaval@codeaurora.org\u003e\n" }, { "commit": "d2e2c49df21f0925749844fd6638b6317cd0ca12", "tree": "8698c155a7601816f50d7e86be1efc874956a313", "parents": [ "12f942b980e748222d8a988f8b8f061750656fc2" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Wed Jul 27 14:15:06 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:21 2011 -0700" }, "message": "msm: rmnet: reschedule read tasklet in low memory conditions\n\nIf the read tasklet is unable to allocate a skb due to low memory\nconditions, reschedule the tasklet to retry at some point in the future.\n\nCRs-Fixed: 295596\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "f3b54abcce53f3a5945eecec0e9ba4c653748d62", "tree": "855cb9354bd4623b8d032792b166add2f14fba51", "parents": [ "c3f8dd345dcf4b2c574add95a56c7649c9fd458e" ], "author": { "name": "Sachin Shah", "email": "sachins@codeaurora.org", "time": "Wed Jul 20 12:03:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:19 2011 -0700" }, "message": "tzcom: Fix resp calculation\n\nResponse buffer is always an offset in input shared buffer.\nCan\u0027t rely on the sb_in_rsp_addr as that value is not filled\nfrom TZ side. This also makes it consitent with the response\nbuffer calculation in tzcom_send_cmd().\n\nSigned-off-by: Sachin Shah \u003csachins@codeaurora.org\u003e\n" }, { "commit": "c3f8dd345dcf4b2c574add95a56c7649c9fd458e", "tree": "9647f39c93422837c727ed2f035bb4e5b07e95a5", "parents": [ "4eade0d763a541f7390c4082dbbaf754263a62fe" ], "author": { "name": "Sachin Shah", "email": "sachins@codeaurora.org", "time": "Fri Jun 17 11:39:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:18 2011 -0700" }, "message": "tzcom: Zero out input shared buffer\n\n- Zero out SB input buffer after a request is\n successfully fulfilled to meet security\n requirements.\n- Remove redundant check for response length.\n\nSigned-off-by: Sachin Shah \u003csachins@codeaurora.org\u003e\n" }, { "commit": "a2f1e62eb043d8e8e0b9e7b761666157d22cb180", "tree": "b19e4bb5684f03e76a05ec0946a0ef655aa4ab72", "parents": [ "768567ac97ae6bf7fc85ceac3ea7623a57f41325" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Wed Aug 17 09:03:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:16 2011 -0700" }, "message": "mfd: pm8921-core: correct ssbi registers for battery alarm driver\n\nThe battery alarm register addresses for BATT_ALARM_CTRL2 and\nBATT_ALARM_PWM_CTRL currently match those present in the PMIC\n8058, but not the PMIC 8921. Correct these addresses so that they\nare the proper locations in the PMIC 8921.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "7df4378df21c1a95c95f74081a0501c3cd5e87e1", "tree": "b1e93b1a18e94c2700bef03c9da74dd5a177c787", "parents": [ "84f43fdfdd9fb0f896ba5685656a33f2eb101b00" ], "author": { "name": "Chiranjeevi Velempati", "email": "cvelempa@codeaurora.org", "time": "Wed Aug 17 14:22:33 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:14 2011 -0700" }, "message": "tty: Allow RI, DSR and CTS modem status bits in tiocmset\n\nAllow modem status bits like RI, DSR and CTS in tiocmset. TTY drivers,\nfor example USB function serial driver, which talks to DCE on behalf\nDTE and running in DCE are interested in these bits.\n\nCRs-fixed: 300912\nSigned-off-by: Chiranjeevi Velempati \u003ccvelempa@codeaurora.org\u003e\n" }, { "commit": "00b6bffc5441ba267ef1d4cd0073a10369381843", "tree": "47858005d122c1a7f1a035c52041c85f5883407e", "parents": [ "189f188d29de1776530a4c523dcbf0882441ca2b" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Wed Aug 17 08:33:42 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:12 2011 -0700" }, "message": "msm_serial_hs: Enable clock when configuring the GSBI\n\nEnable the bus clock when configuring the GSBI CTRL register\nfor UARTDM mode.\n\nCRs-Fixed: 301746\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "189f188d29de1776530a4c523dcbf0882441ca2b", "tree": "6d12deca91159d09ee74ab9cc6ccff1f55c310e4", "parents": [ "07522d9b9dfa7892b195f19bd3765dd8e8b1b627" ], "author": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Tue Aug 16 17:39:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:12 2011 -0700" }, "message": "PMEM: Pre reserve virtual address range for on demand devices.\n\nSince the PMEM driver establishes ioremaps on the fly for\non demand devices it is possible for the virtual address space\nto become quickly fragmented. For such devices, pre-reserve the\nvirtual address range and only set up page table mappings when\nrequired.\n\nCRs-Fixed: 299510\nSigned-off-by: Naveen Ramaraj \u003cnramaraj@codeaurora.org\u003e\n" }, { "commit": "07522d9b9dfa7892b195f19bd3765dd8e8b1b627", "tree": "7cbfe2b9b51fe4c34738c8176ff238b067d5b651", "parents": [ "a980f399e0a4f7e0521449cdaef4766257677867" ], "author": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Tue Aug 16 05:09:30 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:11 2011 -0700" }, "message": "radio:iris: fix the FM scan failure issue\n\nThis patch fixes the bug where break statements were missing\nwhile setting the stereo mode and enabling FM in\nTransmitter mode.\n\nCRs-fixed: 301572\n\nSigned-off-by: Srinivasa Rao Uppala \u003cuppalas@codeaurora.org\u003e\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "a980f399e0a4f7e0521449cdaef4766257677867", "tree": "24b784dc8d276a97f01c6dad0aef482e538a62c9", "parents": [ "a4414b164ee44269ac42c4b5abc9da2ce7bd97d4" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Mon Aug 01 20:55:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:10 2011 -0700" }, "message": "msm: camera: Improve unify sensor apis\n\nAdded more error checking code\nSeparate dimension specific register settings into separate structure\nCode flow improvements\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "0a3249ebfc2d474378fb2a3e49dad2140fd6b042", "tree": "73210f7421fdd21eff44e21e4a0355b00193b687", "parents": [ "71416cefbe57d478457c32adaf6c3d63918abc65" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Aug 16 12:16:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:09 2011 -0700" }, "message": "msm-fb: display: Remove explicit control of mdp_axi_clk\n\nThis clock is already enabled and disabled implicitly along\nwith mdp_clk and should not be controlled directly by the\nMDP driver.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "71416cefbe57d478457c32adaf6c3d63918abc65", "tree": "63035c4a508ff4554161e6125881bdc5bd021e20", "parents": [ "748593a62581fe44511e41c9ebc47d80024e7e0b" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Thu Aug 04 15:51:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:08 2011 -0700" }, "message": "msm: camera: pass config node name up to server on open/close.\n\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\n" }, { "commit": "2422e38c4669bb52cd6cf6719b30c78e4d3c0b1a", "tree": "237f21fe1fd4b4e6d330d66692915c3d5341f67a", "parents": [ "735f01a3e8c1cf6a3fdbe6f41df05cc7510ba4df" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Aug 15 17:31:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:07 2011 -0700" }, "message": "camera: 8960: Don\u0027t control vfe_axi_clk explicitly\n\nIt is controlled implicitly with the VFE core clock.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "ad56d5ff8c76eec0dab783c9fd73f1382546bb1e", "tree": "71fa6f4fb5f4f407dbd0ab0eca8f0e207eeec895", "parents": [ "6ddad59261c0cdf1c2a012c948b45896cda5fea2" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Tue Aug 16 09:07:04 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:05 2011 -0700" }, "message": "msm_serial_hs_lite: Correct Rx Watermark Value\n\nRFWR register\u0027s programming value is considered in Words for UARTDM\nCore, whereas it is considered in Bytes for UART Core. Currently RFWR\nregister is programmed as 3/4 size of Rx FIFO size i.e. 48 Bytes.\nFor UARTDM Core this value needs to configure into Words. Hence programme\nRFWR register with value as 12 instead of 48.\n\nCRs-Fixed: 301603\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "e4813371b1af96117b1b5ad1ec6c1f6bc71227d3", "tree": "0c662bd358b06276e9ea79325c535ef677a9cb26", "parents": [ "5b3641da981a6d6acdf2405cb554afc883e6a711" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Thu Aug 11 21:34:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:04 2011 -0700" }, "message": "msm: camera: Update Kconfig for msm camera sensor\n\nUpdate to only compile for 8960 target\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "28446526c16521ed7b64b3a1b0afae3749b82691", "tree": "e3a3e1a9f4e1734ee70ae58fdefa98b571f1fc1b", "parents": [ "4d3c779eb9d906b381225be5065976703d91872a" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Jul 26 16:39:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:02 2011 -0700" }, "message": "msm: camera: Remove gpio call back function from board file\n\nMoved camera gpio on and off functions to msm_io_8960 file\nExposure camera gpio numbers from board file to msm_io_8960 file.\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "4d3c779eb9d906b381225be5065976703d91872a", "tree": "592fb3eece2a7eff9928ff1c7b28c96b5b322ce5", "parents": [ "c9b525344279c1381da417c9ed93c8485008ddb1" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Mon Jul 25 11:02:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:02 2011 -0700" }, "message": "msm_fb: display: disable timing generator before enable writeback mode\n\nAt pulling mode (lcdc and dsi video mode), timing generator need to\nbe turned off before enable wriback mode and turn it back on after\nenabled.\n\nCRs-fixed: 298593\nSigned-off-by: kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "a0f6b6758aea4909a2e37d29037316de9e148788", "tree": "ec14ec395df0bdddcee4edc110ab271bd5c7988b", "parents": [ "f4f600fdb60565314240ebca70cfdbd83acacd52" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Sat Aug 13 17:36:55 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:58 2011 -0700" }, "message": "slimbus: Already active channels need to be modified in scheduling\n\nIf new channels are scheduled, that may modify pre-existing channel\u0027s\nsegment interval, offset.\nThis patch modifies those fields of already active/suspended channels\nif reconfiguration succeeds.\n\nCRs-fixed: 300522\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "9775260c6ad646cf56bce2fa49ba3180af6f33fa", "tree": "17814b423499c7951856dc33d53563d22312a0f4", "parents": [ "b0039b03842b5657c8f27ef9031b9e1c6c82176e" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Sat Aug 13 00:27:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:54 2011 -0700" }, "message": "platform-drivers: msm: sps: clear BAM global IRQ status after interrupt\n\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" }, { "commit": "b0039b03842b5657c8f27ef9031b9e1c6c82176e", "tree": "bf30c1d2b632aa8916063937426faf86c0a5f18b", "parents": [ "14dc2afb8f7793157a6b4ef67212ff7c753f4c2f" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Tue Aug 09 14:00:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:53 2011 -0700" }, "message": "wcnss: New mechanism to indicate external 48MHz XO option\n\nPlatform data is added to the WCNSS platform device to indicate if the\nboard containing the WCNSS device is configured with an external 48MHz\nXO. In addition a module param is added to the WCNSS driver to allow\nthe platform data to be overridden.\n\nCRs-Fixed: 288847\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\nAcked-by: Jeff Johnson \u003cjjohnson@qca.qualcomm.com\u003e\n" } ], "next": "d928d54d59013dc82df80b4ee52f753cb5640a88" }