)]}' { "log": [ { "commit": "41f8fa330664879217c2fef2dd373446c9c650ca", "tree": "a284daa9b13276f41256e098c62433656a74eb53", "parents": [ "e0b55321970acbdefdeb5d2eff76ffd1b87861af" ], "author": { "name": "Sushmita Susheelendra", "email": "ssusheel@codeaurora.org", "time": "Wed May 11 17:15:58 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:02 2011 -0700" }, "message": "msm: kgsl: Add CFF user event ioctl to write data to cff dumps\n\nAdd the ioctl IOCTL_KGSL_CFF_USER_EVENT to write data to cff dump.\nDefine a new CFF packet cff_op_user_event for this generic user\nevent.\nWrite the surface parameter data packet and verify mem file\npacket to cff dumps\n\nSigned-off-by: Sushmita Susheelendra \u003cssusheel@codeaurora.org\u003e\n" }, { "commit": "a55500bdd4306bb9b61aeee3022f5f0c1b5114dc", "tree": "518657b40cd85cee74731223c854f9d9014039b2", "parents": [ "27663840be133c872ac5ecb4b7a76a788d3e095a" ], "author": { "name": "Wentao Xu", "email": "wentaox@codeaurora.org", "time": "Tue Aug 16 18:15:04 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:55 2011 -0700" }, "message": "msm: dsps: DSPS support for Sub System Restart (SSR)\n\nRegister handler for SMSM_RESET notifications and watchdog\ninterrupts from the DSPS. And add support for reset via\nIOCTL from user-mode application.\n\nSigned-off-by: Wentao Xu \u003cwentaox@codeaurora.org\u003e\n" }, { "commit": "6fe50a87c3d0d4b2bf9e7ba9e8c2749b155c5bbe", "tree": "0ecb468f1879588b40ee9c6761de394e36232dd4", "parents": [ "26cef9c5c9191ab7bca6a23dbbbdca56d6db1690" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 25 21:33:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:47 2011 -0700" }, "message": "power: pm8921-charger: api to control input regulation\n\nThe pmic charger can take measures such as reducing charing\ncurrent if the input charger voltage falls below certain point.\nCreate api to use this feature.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "26cef9c5c9191ab7bca6a23dbbbdca56d6db1690", "tree": "7d2ccaf217835095a738774c1b5186721e8e8eba", "parents": [ "86eea3087349a7c9d73d69912fd10648ec7f1c03" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 25 19:16:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:46 2011 -0700" }, "message": "power: pm8921-charger: api to control trkl charging\n\nProvide mechanism to set trickle, weak voltage and currents via\nboard file. These settings are used to configure the hardware\ncontrolled auto trickle charging.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "86eea3087349a7c9d73d69912fd10648ec7f1c03", "tree": "5f18cd0bd862d65a9803a3ac07b0cbc2c557ec07", "parents": [ "93249a9485ee098b6e527e6f23dfc92686eb9e61" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 15 13:55:18 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:46 2011 -0700" }, "message": "power: pm8921-charger: implement temperature control\n\npm8921 has a special hardware to monitor the battery temperature. Use\nthis block to program the cool and warm thresholds and reduce charging\ncurrent accordingly.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "93249a9485ee098b6e527e6f23dfc92686eb9e61", "tree": "deaee21201b188e6b405f94d78acfe7a3d4f0da9", "parents": [ "48bc4ee915717166ad735d852bd52491494086ce" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Aug 09 14:28:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:45 2011 -0700" }, "message": "mfd: pm8921-adc: Add BTM thermistor table\n\nBTM (Battery Temperature Module) thermistor lookup\ntable is computed based on the resistor divider\u0027s\nused on the board and the specifications of the\nthermistor. Its a function of temperature vs the\nADC code for PM8921 ADC and is used to set the\ncool/warm thresholds on the BTM.\n\nCRs-Fixed: 299646\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "be6bd8ce1ba1eab49caa79be898e947a38016e02", "tree": "b5857a00541931b1a3460ce787c7aa738b013f56", "parents": [ "b24e2c3810f6eca4f8007ca2082c940ad7fbf8d8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 19 12:15:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:39 2011 -0700" }, "message": "power: pm8921-charger: add support for invalid battery\n\nUse adc reading on the battery_id resistor to check if a battery\nis valid. If it is not disable charging.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "b24e2c3810f6eca4f8007ca2082c940ad7fbf8d8", "tree": "001e04f8cb0803b244899b9c9d9cc23a2d94dbf6", "parents": [ "485a053da3be033d26162c32329cec26aba68449" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 17 17:13:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:39 2011 -0700" }, "message": "power: pm8921-charger: various apis\n\nImplement API\u0027s to\n\t- set maximum battery charging current\n\t- disable drawing current from the source\n\t- detect if battery is being charged and which charger source\n\t is charging the battery\n\t- get battery temperature\n\t- detect battery is present\n\t- detect usb is present\n\t- detect dc is present\n\t- set max trickle charging time\n\t- set max auto charging time\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "1f52c4141cf9f2c5d6a32918d056f93ce3897ef6", "tree": "990f14c5ae8a6621766592f7db0035ac9a61974a", "parents": [ "57dcfff1206da4b1f6e3cdbbc63b5c27d57ded24" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:11:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:29 2011 -0700" }, "message": "power: pm8921-charger: add enable/disable api\n\nAdd api to enable/disable battery charging. This api will help\nstart/stop current flowing in the battery for charging purposes, but\nit does not affect the current the device draws from a charger source.\n\nCRs-Fixed: 300786\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "7f7de4f8f82ca83c74a8b8b1892ab1a48fd9e7e2", "tree": "091ce9cf90fafaad458eca77fd9f0b901bd4f541", "parents": [ "3652ed735ca19effa968b363b3d64750c41da042" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Jul 27 10:29:01 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:28 2011 -0700" }, "message": "8060: wlan: Enable wlan on dragonboard\n\nDifferent values for pin_controlled need for dragonboard\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "a7423e433ea5736234c40e0341d7451af9a8fc15", "tree": "9f6b494c60420f55dee8c03c451de4647d03a697", "parents": [ "f23a2316e6ccd335f2559b354812aad3f1b2b25b" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Mon Apr 18 15:11:21 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:26 2011 -0700" }, "message": "msm: kgsl: cffdump syncmem ioctl\n\nThis ioctl is needed to track memory writes done from userspace\nso that this data is correctly captured in the dump.\n\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "72407e986ccbb768b85a1d58df1c4a0d0cbbcecf", "tree": "d282be00ac733e3fc40943f78e27653d39c8cae3", "parents": [ "4613ce4c372d594e14b8cd60af4c14ad09ab8497" ], "author": { "name": "Chuanxiao Dong", "email": "chuanxiao.dong@intel.com", "time": "Wed Aug 24 14:00:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:21 2011 -0700" }, "message": "mmc: remove MMC bus legacy suspend/resume method\n\nMMC bus suspend/resume was using legacy method. In system entering\nS3 patch, the suspend/resume function cannot be called since MMC\nbus also implemented the new suspend/resume method (dev_pm_ops struct).\nSo if dev_pm_ops is defined but .suspend/.resume callbacks not implemented,\nmmc_queue will not be suspended/resumed.\n\nThis patch will remove the legacy suspend/resume method and change to\nuse the new method totally.\n\nSigned-off-by: Chuanxiao Dong \u003cchuanxiao.dong@intel.com\u003e\nSigned-off-by: Sujith Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "3043fbaf3c938e70c6a5f587f86f6b653becc3c3", "tree": "f3275eab9f245ee097ba59a08a2eab0b981632fb", "parents": [ "ed246a9a919a2b040104410e555417a009215d5b" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Mon Aug 01 14:15:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:00 2011 -0700" }, "message": "ASoC: wcd9310: Enable platform-specific micbias configuration\n\nWCD9310 has four micbiases and each of them can be programmed to get its\npower source from one of 3 available cfilters. Each cfilter can be\nprogrammed to different voltage levels. Essentially, on WCD9310, a user\ncan have up to three different voltage levels to power various analog\nmicrophones and digital microphones. As it is now, micbias voltage level\nof WCD9310 is left to default value. Micbias and cfilter mapping is managed\nby codec driver. Different board design can have different micbias\narrangement. Micbias configuration of wcd9310 CODEC for 8960 CDP/MTP/FLUID\nis properly defined in this patch.\n\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "727225f609791168016d9d7facae7a2cfdfce4f4", "tree": "d8aa5f424cf78516b878a7d8c0c251d29dad9d43", "parents": [ "ce1315aabcedc29e64b6719cfc963064a1780b4c" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu Aug 18 11:09:49 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:53 2011 -0700" }, "message": "input: cyttsp-i2c: Add support for disabling ghost touch detection\n\nAdd support to treat ghost touches as normal touches incase firmware\nreports all touches as ghost touches.\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "1316308eb30c2745c9b7a9b41017ceccc86315b5", "tree": "83887b90039592ecde1dddcdf331291b619da8b4", "parents": [ "a7a1c6b3d50e8a1e658dda6f18949c521b72c9a4" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Tue Aug 09 10:17:06 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:46 2011 -0700" }, "message": "msm_charger: Allow parameters to select default charger type\n\nAdded method to msm_charger to allow programming of max source\ncurrent. Created struct for platform data to be passed into\npmic8058_charger\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "8c78b13c9717032a60d9f8e8f35c8d729709da9a", "tree": "f9659dc2f3f81a1603e83ffadc80a68a4988f23a", "parents": [ "e96f66dd6b37316487cbc350ff55b3c9ad722248" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Thu May 26 10:27:47 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:37 2011 -0700" }, "message": "lib: Add debugfs file for tracking memory allocations\n\nAdd caller information to memory allocation calls and\ncreate /sys/kernel/debug/mempool/map to show the current set of\nallocations across all memory pools.\n\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "ef391acc67018666527ff306574cc56f6d103481", "tree": "4150de38564a6e856c581bbfb97812033746647f", "parents": [ "48aef6d5c2dbe622a0c44440809f4860ff7a5770" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Aug 15 20:27:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:27 2011 -0700" }, "message": "msm: rotator: Don\u0027t control rot_axi_clk explicitly\n\nIt is now controlled implicitly along with the rotator core clock\nfor all SoCs.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "a498e4d8256962b431843504f5df288509be5f20", "tree": "d58e20f2693683618c6a05ee516d5dfe7419305c", "parents": [ "d7b05e5bab087bac1b384623e2a4669b3c475424" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Aug 09 19:10:12 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:24 2011 -0700" }, "message": "input: atmel-mxt-ts: Add regulator support and init. callbacks\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "974a40d3c133b78db7e99404873336638f3f17b0", "tree": "e1bb4a8bc5734a49fff53ed431724c12bc80a726", "parents": [ "d2e2c49df21f0925749844fd6638b6317cd0ca12" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Mon Jul 18 15:08:21 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:21 2011 -0700" }, "message": "msm: audio: qdsp6v2: Change RTAC to use topology\n\nThis changes real-time audio calibration (RTAC) to use\ntopology ID\u0027s instead of device ID\u0027s.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "5b3641da981a6d6acdf2405cb554afc883e6a711", "tree": "8bb0463f5fbc0cdf0b89a184b16f3f8c72cbfc02", "parents": [ "ce74ba30f3a4fde873168b86fd14106cb3e49406" ], "author": { "name": "Neema Shetty", "email": "nshetty@codeaurora.org", "time": "Fri Jul 29 20:30:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:04 2011 -0700" }, "message": "msm: audio: qdsp6v2: Add PCM-WB support for VoIP.\n\nCRs-fixed: 297579\nSigned-off-by: Neema Shetty \u003cnshetty@codeaurora.org\u003e\n" }, { "commit": "6619d165ccab07bb8c5a4848dcd3fffdc3db1c2f", "tree": "2eb8c131b8329a6da7fcffb0ee487480bfc38df2", "parents": [ "a0f6b6758aea4909a2e37d29037316de9e148788" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Wed Jul 13 18:09:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:59 2011 -0700" }, "message": "Kbuild: Export Tabla register macro header file to user space\n\nGives audio acdb utility library access to Tabla register macros\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "b0039b03842b5657c8f27ef9031b9e1c6c82176e", "tree": "bf30c1d2b632aa8916063937426faf86c0a5f18b", "parents": [ "14dc2afb8f7793157a6b4ef67212ff7c753f4c2f" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Tue Aug 09 14:00:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:53 2011 -0700" }, "message": "wcnss: New mechanism to indicate external 48MHz XO option\n\nPlatform data is added to the WCNSS platform device to indicate if the\nboard containing the WCNSS device is configured with an external 48MHz\nXO. In addition a module param is added to the WCNSS driver to allow\nthe platform data to be overridden.\n\nCRs-Fixed: 288847\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\nAcked-by: Jeff Johnson \u003cjjohnson@qca.qualcomm.com\u003e\n" }, { "commit": "76d4db93666aabb4c53c180a30b7a8f96d404546", "tree": "bd437596a8445fe8a8049386796dbe2242198baf", "parents": [ "b208a74189b51e988135a921807b7c72bdbdb5a0" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jul 19 11:54:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:50 2011 -0700" }, "message": "power: pm8921-bms: Add calibration for hkadc\n\nThe output of hkadc calibration steps are voltages measured at\n0.625V and 1.25V. We use these to adjust the vbatt readings.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "f734c67fa1dffeec8d7193b4567496157dce9c4c", "tree": "85cb307e4441bbdd01cda4f9c35af79db25bbd02", "parents": [ "e1fd3dae5de0690e77f0ce41ea7956633dd77567" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 11 10:20:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:33 2011 -0700" }, "message": "power: pmic8058-charger: api to get fsm state\n\nImplement an api to return the pmic internal charging state.\n\nNow that we have a enum to define the states, replace the hard-coded\nstate numbers to enum values.\n\nCRs-Fixed: 299629\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "368db7994060778331290d8027e7602bf78e758a", "tree": "3c22e1ec52dc60544d5404992c94ed62df9d4e64", "parents": [ "8a08b966fe5838baec12754480948403fe07a48a" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Tue Jul 05 08:09:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:26 2011 -0700" }, "message": "misc: pm8058-pwm: add two APIs\n\nThese two new APIs allow a driver to specify its PWM period\nand duty cycle separately using PM8058 chip specific parameters\nor raw values. The API to program a duty cycle uses hardware\nmodule\u0027s LUT (LookUpTable) to output PWM value, which can be\nused to alleviate potential glitches using direct writing to\nPWM register.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "d3337ed9e3456ff18c4791fa0372f763bd173328", "tree": "576d61e315afe5517ff4cce637e99de9fd841a81", "parents": [ "3382c5159846e6e6f963261a094329267a61e1b6" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Mon Jul 04 23:16:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:25 2011 -0700" }, "message": "misc: pm8058-pwm: split pw8058_pwm_config to smaller structs\n\nA big struct of pw8058_pwm_config is not easy to manage. Split it\nto smaller structs and make the period struct public.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "5c8ea1f266d8f7af35ea9a716a257771f6de6b94", "tree": "82c41a6e0662e4ac387a8c3e2eeb4a285f2d98ba", "parents": [ "ade1f84e29661daa1c5131e3272f8464cb81cc95" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Thu Jul 28 15:11:29 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:07 2011 -0700" }, "message": "crypto: Clean up header file inclusion and location\n\n- Create a flat directory structure for hw crypto modules\n that includes all source and all header files.\n- Remove msm/inc directory\n- Relocate qcedev.h header file to include/linux\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "12e49bfea7d7467639ded394481ceaac97ffa8ef", "tree": "ec50a50fe9a68ab8ce4070ceb41c066cac257f7c", "parents": [ "e355164ba86d56b5574ef6b98405d9e6e377a35f" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Jul 22 16:24:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:59 2011 -0700" }, "message": "pm8xxx-led: Add API to configure pm8xxx LEDs\n\nAdd pm8xxx_led_configure API. It takes LED Id, mode,\nand maximum current to be set.\nMoreover,\n1) Convert current values to actual current level using\n appropriate LED current factor.\n2) Check brightness values against acceptable\n limits.\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "6a3c91408d3a6218c34d4ead3ae070df176898b3", "tree": "97eedd810108561a0d04bb3fe4a6bb093c3bdd4d", "parents": [ "150f788698f46839fec2537ed808758e79852530" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Jul 14 16:52:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:53 2011 -0700" }, "message": "mfd: pmic8058: add pm8058_stay_on API\n\nPMIC stay-on feature allows PMIC to ignore MSM PS_HOLD\u003dlow\nsignal so that some special functions like debugging could be\nperformed.\n\nThis feature should not be used in any product release.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "150f788698f46839fec2537ed808758e79852530", "tree": "4208b3be39f9660231e9cf6789c82b492d3d32a4", "parents": [ "8b38f94ece99ac4a31ea2b97e4444425256278dc" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Mon Aug 01 18:31:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:53 2011 -0700" }, "message": "msm: audio: qdsp6v2: Add format type adif in aac driver\n\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "1d053f856bb08c43006a76ecbfec71f5357df54c", "tree": "9cc0a3eaba2e7fa86e339be277616e6e4243945f", "parents": [ "020b37c00ce45e4bad5698365860d77549cb27b0" ], "author": { "name": "Maheshwar Ajja", "email": "majja@codeaurora.org", "time": "Wed Jul 20 20:45:11 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:44 2011 -0700" }, "message": "vidc: 720p: Add IDR Frame type support for H264 format\n\nRead IDR frame type from 720p core register set and\npropagate it to user space using new IDR frame type\nenumeration added in api header file. The IDR frame\ntype info is used in SYNCFRAME logic for H264 format\nin userspace.\n\nCRs-Fixed: 296738\nSigned-off-by: Maheshwar Ajja \u003cmajja@codeaurora.org\u003e\n" }, { "commit": "4283a4c56a1e3e77f281f018c841d9db1bbb5350", "tree": "c090eb4a1f2ba82c2d3896e9f77b1d5c73a7a63c", "parents": [ "474f225b5559e57c8df99d0512c1b02861017d44" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Fri Jul 29 16:18:54 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:20 2011 -0700" }, "message": "ASoC: WCD9310: Fixes issues with ANC\n\nANC register writes were improperly packed into\nintegers. ANC register writes were not correctly\nperformed, as the mask was incorrectly applied.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "6804c742a1e9e35dd3eb95028a9d3323663935fe", "tree": "2fcea367927e0aac838d5cf8623c6a979949e5a8", "parents": [ "fcfbea6273f428343dcbc23e94e8f366d12419cf" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed Jul 27 11:47:53 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:13 2011 -0700" }, "message": "mfd: pm8921: Add cell data for pm8921 vibrator\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "fcfbea6273f428343dcbc23e94e8f366d12419cf", "tree": "a50c700ff796848803002581c7a528115317217e", "parents": [ "ed016bedc8c2af80b10a9d0558b537cf5e396636" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed Jul 27 11:04:58 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:13 2011 -0700" }, "message": "drivers: misc: Add pm8xxx based vibrator driver\n\nThis driver uses the timed output framework to\nsupport the vibrator functionality.\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "e0c3e5f39e0e99d672990311a8a862c46312f18e", "tree": "5825a0a25e15d47b30965c4b24cf45d94cf0ba71", "parents": [ "eed550bc813a9bfeb105230eea8f4ce9f9acdabc" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Jul 11 21:17:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:44 2011 -0700" }, "message": "power: pm8921-charger: implement CURRENT_NOW property\n\nThe pm8921 bms driver can provide instantaneous current. Use the\ncurrent now property of the power_supply class to expose this\nfeature.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "248eac2b1519a94c2587d627fe68a38727b16b58", "tree": "a403528f60d97dc3604d87c5fcacf5a05d6e740f", "parents": [ "1a99033bf915b066ddb542b019091558d13bea54" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Tue Jul 12 14:24:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:41 2011 -0700" }, "message": "vidc: vdec: Report dropped field for interlace clips.\n\nFor field based interlace clips, video core will generate\nan error when one of field is missing in bitstream.\nDriver will report this to upper layer, so that it can\ntake appropriate action.\n\nCRs-fixed: 290659\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n" }, { "commit": "cc450c9f1ce3e966865365a727181f965df71daf", "tree": "6a67cde14bbe5dd091be08da5edec4fc794dfe10", "parents": [ "f2085cdbd15907d0a0a5e6d3e8f5726b05a52a11" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Wed Jul 27 14:38:15 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:39 2011 -0700" }, "message": "msm: ipc: Update server lookup to multiple compatible services\n\nIPC Router looks up all compatible services during the server\nlookup using the compatibility mask provided by the clients.\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "746d9ab0dabf7165b88906860ed3b52b351bcfe8", "tree": "2c08b6a614ed0fb9ef73bdd4324d66c37a009beb", "parents": [ "8954956f9dcd1cd7993d2f00836dc55c6a1dcbe8" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Thu Jul 07 11:55:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:29 2011 -0700" }, "message": "vidc: vdec: Report bitstream errors to driver client.\n\nWhen video core generates recoverable bitstream errors,\ndriver will report them to upper layer.\n\nCRs-fixed: 290659\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n" }, { "commit": "98a7ecb14c4291bc55b692bc294cee8cc5dbb5aa", "tree": "80d1c2e7ed4d40c17173896c54e8ac73926e3acc", "parents": [ "930bf7bfd7b754bf2d464c7574a02016104f2cb4" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Mon Jul 25 15:25:35 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:10 2011 -0700" }, "message": "slimbus: Support ability to specify maximum and minimum clock gears\n\nSlimbus can run in clock gears 1 through 10 per spec. Scheduling\nalgorithm tries to find the optimum clock gear depending on bandwidth\nusage for messaging and active data channels.\nHowever, not all controllers may have the ability to support all the\n10 clock gears. This patch provides ability so that scheduling\nalgorithm will only run the bus in supported slimbus clock gear.\nControllers can specify supported minimum and maximum clock gear\nduring registration with the framework.\n\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "1e36a02967aff9238b8e26b6ba23070b51e660bb", "tree": "3ac8ac152715b4f0ec3e21ddb0be01f9e4924e38", "parents": [ "f453bb396affe07bacf9c9f021c487eef59a47be" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed Jun 22 17:08:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:04 2011 -0700" }, "message": "pmem: ensure SMI correctness\n\nDue to hardware constraints, the SMI should not be mapped\nin the kernel space when not in use. Unmap the SMI from\nthe kernel address space when the last allocation is freed.\nVote for bus bandwidth as well while the SMI is allocated.\n\nCRs-Fixed: 281723\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "18b04783a057552e9632596dec2fa0329f26b589", "tree": "fbf8fe0e624f78b0374eff8de2a75ce6af739b19", "parents": [ "57996e3add058436fd4801644106c6fb3c00e489" ], "author": { "name": "Kobi Cohen Arazi", "email": "kobic@codeaurora.org", "time": "Tue Jul 26 12:11:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:02 2011 -0700" }, "message": "Add missing header guards in msm_rotator.h\n\nmsm_rotator.h was missing define __MSM_ROTATOR_H__\n\nSigned-off-by: Kobi Cohen-Arazi \u003ckobic@codeaurora.org\u003e\n" }, { "commit": "cfca519f00b9651f86887fbff8a784fcfc8c03d9", "tree": "4d4245f9903d14a1b10a31a503c3e855ab59027e", "parents": [ "529461b70c7dc20b0371e54a63844edae905d7a2" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Jul 23 11:21:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:58 2011 -0700" }, "message": "Revert \"workqueue: add workqueue_empty() api\"\n\nThis reverts commit bccb069835ef880e437c68a7fed9529c2549605f.\n\nSince the workqueue code deletes the work before executing it,\nchecking for no work item being currently queued to the workqueue\nis not sufficient to guarantee that all the works have finished\nexecution. Hence, we have moved to using a counter based solution\nand so this change is no longer required.\n\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "63e1f9ff178a33a955fa81c196e58fbfb9dab057", "tree": "aa1ddd1bfc6c446c0183251554b5a6eec55dbe8c", "parents": [ "89d8c1dff8e1816b41d705c6d76266daf4b4d77e" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Jul 26 15:29:05 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:51 2011 -0700" }, "message": "regulator: pm8921-regulator: Add enable_time platform data entry\n\nAdd an enable_time platform data member which can be used to specify\nthe board dependent enable (rise) time of each regulator.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "405dc3051b06637b6a38aa6b1f4da1660cff37d0", "tree": "7f1e7a6efb94ef7a0d20dbda722d390ea5e1a2de", "parents": [ "5a3695011acfed1787ad3bbad90c3fc5bd239134" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Thu Jul 21 15:06:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:42 2011 -0700" }, "message": "msm_fb: display: add ioctl for mixer info\n\nAdd new ioctl to allow user to query mdp mixer detail configuration.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "c49b85db0baedf56bf784462f9a44038253fc44a", "tree": "74ec11f46c618d5f661fea2d34115426e570db3d", "parents": [ "6d6ff5e495a12895b5b4a37eb3049fda560c693a" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Fri Jul 15 18:55:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:11 2011 -0700" }, "message": "msm: audio: qdsp6v2: Support for RX \u0026 TX ADM topology\n\nThis adds support to store separate RX \u0026 TX topology for\nthe audio device manager (ADM).\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "229c6a5dc09fa4981088ffe4929f1bcb3ce70e37", "tree": "01f2240cc09183b6a562253b2406e029db12fb24", "parents": [ "a21d6bc64b41a8eaa61a7822a255c8910bf113f4" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Tue Jul 12 16:18:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:06 2011 -0700" }, "message": "ASoC: WCD9310: Add Active Noise Cancellation support\n\nANC is a feature which reduces noise on the near-end\nby pushing anti-noise onto the audio stream heard\nby the user. ANC mixes the anti-noise signal\ninside of the WCD9310 codec.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "5cd33b37653f4c32b9d8e992bab5938c37eae130", "tree": "1576740c74ae4192ace8f8131ab9e6b504d3fd67", "parents": [ "a5ee43644bcdcae9146349ba5163d991cfca1324" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Mon Jul 18 18:07:10 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:50 2011 -0700" }, "message": "mm: ashmem: Add cache clean and invalidate ioctls for ashmem\n\nCRs-fixed: 291124\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "7f12ebf6a27f4b892ee5729d574d71a2a8b4bed3", "tree": "375714c4acb4a984ebeef5114de68321425aca8f", "parents": [ "fd915311da98b8fd1b13d7b9cd3f23744c3720cb" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Mon Jul 18 17:14:39 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:45 2011 -0700" }, "message": "msm: kgsl: Remove unused variable w/ unneeded ifdef\n\nThis variable/ifdef should have been removed in a prior change.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "57390b03ac1e24045fe4b056d84c091a0ee1e0d9", "tree": "b848e945cce04cdfd9e9d48e494c7b428d4748bb", "parents": [ "0e468741095d4669b8716aa22c46d71fa64a6574" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jul 14 18:05:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:43 2011 -0700" }, "message": "power: msm_charger: control system power\n\nSome chargers can control their current supply for the system. Provide\nfacility in the msm_charger to choose which charger supplies system\ncurrent. It is guaranteed that start charging will always be called\non a charger that has been previously been asked to provide system\ncurrent.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "79c87bf556445f1d2b12f0898d9cb125e10f7631", "tree": "376621e156b4cb38b7add6117cd852da89d62c3c", "parents": [ "ebca0c796cb22947a224c1afea9b7950886804e1" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Fri Jul 15 14:05:57 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 09:59:11 2011 -0700" }, "message": "Kbuild: Export ashmem header file to user space\n\nCRs-fixed: 291124\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "4d1ab557f03730771215020fc1e34b26dc26604b", "tree": "ce94f35a3690a6b94489188f81cd72bb77d37346", "parents": [ "ba345d5b6851c99cf58d90d7212f80c7924f416b" ], "author": { "name": "Ashay Jaiswal", "email": "ashayj@codeaurora.org", "time": "Fri Jul 15 11:30:49 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 09:59:08 2011 -0700" }, "message": "drivers: rtc-pm8058: Fix automatic wakeup of APPS due to RTC alarm.\n\nAlarm interrupt causes automatic wakeup even when the phone is in\npowerdown state.\n\nCRs-Fixed: 286086\nSigned-off-by: Ashay Jaiswal \u003cashayj@codeaurora.org\u003e\n" }, { "commit": "52344ac5845edcc6ccc016ce1f07f61553ba2cad", "tree": "4ffc2e17db9be349bd9f190459ca025151e65fe7", "parents": [ "2fb6f08e5055df5d5b367e9b2c06025ab78d058a" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jul 05 18:44:54 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 09:59:06 2011 -0700" }, "message": "power: pm8921-bms: add nano-doc comments to exported functions\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "2fb6f08e5055df5d5b367e9b2c06025ab78d058a", "tree": "33e74191a0351d5d4f9414205cc2dcae857591dc", "parents": [ "4c0d304651615fb084526704703201617d81cccd" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jun 28 17:10:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 09:59:06 2011 -0700" }, "message": "power: pm8921-bms: Add api to read Vsense\n\nThe Rsense resistor connects between the -ve end of the battery\nand GND. The voltage across the Rsense gives us a good indication\nof the current flowing through the battery.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "c448d98e7e2eceea73477e28ee75ed23b00ff3dc", "tree": "4b81a36d6346bafda3f78e487c6791d2b4ffc126", "parents": [ "814e6171ab7a99fdcb2207b5c0c96dab4b3a3f2b" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jun 28 20:48:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 09:59:00 2011 -0700" }, "message": "power: pm8921-bms: read temperature and voltage via adc\n\nRead the battery temeperature and voltage from the adc driver instead\nof hard coding them in the driver.\n\nIn the charing began and charing end functions, use\npm8921_bms_get_percent_charge api. This prevents duplicating calling\nthe adc functions.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "7429cea50e3a0020a1bf0a6e9d596ebe2d3aba40", "tree": "ff1d279b5ffdf7bc0ce8c76260e9e779adce2252", "parents": [ "15187778e4af8e8f675639dbc8c942aab3658f20" ], "author": { "name": "Larry Bassel", "email": "lbassel@codeaurora.org", "time": "Fri Jul 08 15:08:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 09:58:55 2011 -0700" }, "message": "pmem: remove support for unstable PMEM devices\n\nThis functionality has never been used, is ugly and\ncomplicates the DMM design.\n\nSigned-off-by: Larry Bassel \u003clbassel@codeaurora.org\u003e\n" }, { "commit": "15187778e4af8e8f675639dbc8c942aab3658f20", "tree": "1a3f247e47442a1a6bc4cc878c86c4c6ab31c57f", "parents": [ "b19046ab42aa41bbbdd822c6e67df9ebfc8c6b2f" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed Jun 22 17:39:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 09:58:24 2011 -0700" }, "message": "input: touchscreen: Move power mode handling to platform data\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "80ba33d88f07caa74cf90721780f17f26fe9d236", "tree": "8f5514e1630dbcbdb9ce72bdec6d0a0fe8c72ef9", "parents": [ "c5760300500abbf48d54daa86836890da276ea58" ], "author": { "name": "Jason Varbedian", "email": "jasonv@codeaurora.org", "time": "Mon Jul 11 17:29:05 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 09:58:23 2011 -0700" }, "message": "msm: kgsl: change readtimestamp from IOR to IOWR and keep legacy\n\nSigned-off-by: Jason Varbedian \u003cjasonv@codeaurora.org\u003e\n" }, { "commit": "3f2bc4d6eb5a4fada842462ba22bb6bbb41d00c7", "tree": "088e0646c8abcbde263d13ee865ba69032ac86dd", "parents": [ "f06154cc47399dfdb3950d3e6b71d67ee186f69d" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Aug 16 17:27:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 09:57:10 2011 -0700" }, "message": "Initial Contribution\n\nmsm-2.6.38: tag AU_LINUX_ANDROID_GINGERBREAD.02.03.04.00.142\n\nSigned-off-by: Bryan Huntsman \u003cbryanh@codeaurora.org\u003e\n" }, { "commit": "f06154cc47399dfdb3950d3e6b71d67ee186f69d", "tree": "2a34875c0da6853cacf22777bc5ce0544b85e823", "parents": [ "66589de55eff46f036ab5316a77834e01af3753c", "99ce39e359fa29e4b609a6a13485e7573eda5dfb" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Fri Sep 23 11:47:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Fri Sep 23 11:47:21 2011 -0700" }, "message": "Merge branch \u0027devicetree/next\u0027 of git://git.secretlab.ca/git/linux-2.6\n\n* \u0027devicetree/next\u0027 of git://git.secretlab.ca/git/linux-2.6:\n dt: include linux/errno.h in linux/of_address.h\n of/address: Add of_find_matching_node_by_address helper\n dt: remove extra xsysace platform_driver registration\n tty/serial: Add devicetree support for nVidia Tegra serial ports\n dt: add empty of_property_read_u32[_array] for non-dt\n dt: bindings: move SEC node under new crypto/\n dt: add helper function to read u32 arrays\n tty/serial: change of_serial to use new of_property_read_u32() api\n dt: add \u0027const\u0027 for of_property_read_string parameter **out_string\n dt: add helper functions to read u32 and string property values\n tty: of_serial: support for 32 bit accesses\n dt: document the of_serial bindings\n dt/platform: allow device name to be overridden\n drivers/amba: create devices from device tree\n dt: add of_platform_populate() for creating device from the device tree\n dt: Add default match table for bus ids\n" }, { "commit": "66589de55eff46f036ab5316a77834e01af3753c", "tree": "867b8323f4b50c03d9a2c3e28eea81cdc543d159", "parents": [ "b198bd57abdf1c84f0a877fea7c43f84df110902", "87c0eb12b4f5b6b6d5933bb7198aa56a46e74250" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Fri Sep 23 11:00:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Fri Sep 23 11:00:20 2011 -0700" }, "message": "Merge remote-tracking branch \u0027linux-audio/sgc/topic/omap_3.0\u0027\n\n* linux-audio/sgc/topic/omap_3.0: (106 commits)\n ASoC: twl6040: Configure init gain to minimal value\n ASoC: ABE: Protect playback/capture triggers against removal\n ASoC: DSP: Connect FE-\u003eBE links if FE is active\n ASoC: McPDM: Update channel management (for squash)\n ASoC: OMAP4 - Port Manager: Fix up DEBUG_FS compilation error\n ASoC: ABE DSP: Fixes for firmware equalizer parsing\n ASoC: ABE DSP: Use same firmware strategy for built-in and modules\n ASoC: ABE HAL: Allow flexible firmware loading\n ASoC: ABE DSP: Fix compilation warnings\n ASoC: OMAP ABE: update Firmware version 09.45\n ASoC: pcm - fix locking for dsp ops\n ASoC: OMAP ABE: Update for PM.\n ASoC: McPDM: Update channels management to link UL and DL\n ASoC: ABE DAI: Call modem trigger in bespoke_trigger()\n ASoC: ABE DAI: support 2 channels for MODEM DAI\n OMAP4: SDP4430: Fix merge issue with new MFD driver\n ASoC: OMAP: SDP4430 fix merge issue.\n ASoC: dapm: Fix long_name pointer for DAPM muxes\n ASoC: mcpdm: Enable watchdog during audio activity\n ASoC: SDP4430: Fix DMICs stream name\n ...\n" }, { "commit": "efcf89c8eb62b7c0c5976cb94f892c891afea199", "tree": "73d14c4ff835e5d7fd8608a8a7d20b762d1d4827", "parents": [ "8b404d162085c675989d7fb55c3f641fdfa11eec" ], "author": { "name": "Nishanth Menon", "email": "nm@ti.com", "time": "Wed Aug 17 18:31:58 2011 -0500" }, "committer": { "name": "Todd Poynor", "email": "toddpoynor@google.com", "time": "Fri Aug 19 11:41:00 2011 -0700" }, "message": "panic: Add board ID to panic output\n\nAt times, it is necessary for boards to provide some additional information\nas part of panic logs. Provide information on the board hardware as part\nof panic logs.\n\nIt is safer to print this information at the very end in case something\nbad happens as part of the information retrieval itself.\n\nTo use this, set global mach_panic_string to an appropriate string in the\nboard file.\n\nChange-Id: Id12cdda87b0cd2940dd01d52db97e6162f671b4d\nSigned-off-by: Nishanth Menon \u003cnm@ti.com\u003e\n" }, { "commit": "9abd59b0df155835a970c2b9c8f93367eb793797", "tree": "bcf0868f831d204e2b582113c53b8de3ff015eca", "parents": [ "4e111751cfcb75f26d2725eab934b6eb91a3d115", "94ed5b4788a7cdbe68bc7cb8516972cbebdc8274" ], "author": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Wed Aug 10 18:07:59 2011 -0700" }, "committer": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Wed Aug 10 18:07:59 2011 -0700" }, "message": "Merge commit \u0027v3.0.1\u0027 into android-3.0\n" }, { "commit": "4e111751cfcb75f26d2725eab934b6eb91a3d115", "tree": "b3d63b5b44bd2036db6e0f0b2e81769c84cc5ca3", "parents": [ "ca64b0cd3a12d7704f4e98f4f5d51f41eb5047a2", "02f8c6aee8df3cdc935e9bdd4f2d020306035dbe" ], "author": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Wed Aug 10 18:04:30 2011 -0700" }, "committer": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Wed Aug 10 18:04:30 2011 -0700" }, "message": "Merge commit \u0027v3.0\u0027 into android-3.0\n" }, { "commit": "e65d9fe5564afaca75ae657179446578be73e9ba", "tree": "ece828b12ee9763b08e570c4afe32dccc97478f1", "parents": [ "f3d9cdd92a341c10bf277a2b84403e7041519251" ], "author": { "name": "Erik Gilling", "email": "konkers@android.com", "time": "Tue Aug 09 14:18:21 2011 -0700" }, "committer": { "name": "Erik Gilling", "email": "konkers@android.com", "time": "Tue Aug 09 17:58:49 2011 -0700" }, "message": "usb: otg: add proxy_wait handler to otg_id\n\nSome otg_id handlers can detect what\u0027s connected but can\u0027t detect a change.\nThis allows that handler to pass off the waiting for ID change to a proxy.\n\nChange-Id: Ib38b750c3da4bffc35e37b620ecee37c5d64d31f\nSigned-off-by: Erik Gilling \u003ckonkers@android.com\u003e\n" }, { "commit": "3fe24366a40147d7c776e1f291193fd3b61f217d", "tree": "35332418ccff1248b80cb7517f16f9439fb5a7dc", "parents": [ "89c65d6d9dd87332d58c853e31938b98f7ac8463" ], "author": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Tue Aug 09 14:42:08 2011 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Tue Aug 09 14:49:21 2011 -0700" }, "message": "ion: minor clean up\n\n-- init rb nodes in ion_handle_create\n-- in ion_handle_destroy, check that a node belongs to a tree before removing\n it (safety check, does not happen right now)\n-- mark as static functions used only inside ion.c\n-- update comments to ion_share() with a relevant blurb from the implementation\n-- other minor updates/typo fixes to comments\n\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n" }, { "commit": "c14acb19a4b1482b6dd6e9d0874b2c8e32d6599d", "tree": "09449801fb0b88b73bdbb83876f251a65a2120ac", "parents": [ "1fcb9d4b03b6ad6f4de417bbbe21d82123290114" ], "author": { "name": "Trond Myklebust", "email": "Trond.Myklebust@netapp.com", "time": "Sat Jul 30 12:45:35 2011 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Aug 04 21:58:40 2011 -0700" }, "message": "NFS: Fix spurious readdir cookie loop messages\n\ncommit 0c0308066ca53fdf1423895f3a42838b67b3a5a8 upstream.\n\nIf the directory contents change, then we have to accept that the\nfile-\u003ef_pos value may shrink if we do a \u0027search-by-cookie\u0027. In that\ncase, we should turn off the loop detection and let the NFS client\ntry to recover.\n\nThe patch also fixes a second loop detection bug by ensuring\nthat after turning on the ctx-\u003eduped flag, we read at least one new\ncookie into ctx-\u003edir_cookie before attempting to match with\nctx-\u003edup_cookie.\n\nReported-by: Petr Vandrovec \u003cpetr@vandrovec.name\u003e\nSigned-off-by: Trond Myklebust \u003cTrond.Myklebust@netapp.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "b045b9a265fb46d8197b7d78aff1a8f6ab8e23df", "tree": "650daaba84981a7ac749611f2ccee133380940c5", "parents": [ "cb83d9f7840657a0f0cc29ba5c01ce7320e28e9a" ], "author": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Mon Jul 25 17:12:32 2011 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Aug 04 21:58:38 2011 -0700" }, "message": "mm/futex: fix futex writes on archs with SW tracking of dirty \u0026 young\n\ncommit 2efaca927f5cd7ecd0f1554b8f9b6a9a2c329c03 upstream.\n\nI haven\u0027t reproduced it myself but the fail scenario is that on such\nmachines (notably ARM and some embedded powerpc), if you manage to hit\nthat futex path on a writable page whose dirty bit has gone from the PTE,\nyou\u0027ll livelock inside the kernel from what I can tell.\n\nIt will go in a loop of trying the atomic access, failing, trying gup to\n\"fix it up\", getting succcess from gup, go back to the atomic access,\nfailing again because dirty wasn\u0027t fixed etc...\n\nSo I think you essentially hang in the kernel.\n\nThe scenario is probably rare\u0027ish because affected architecture are\nembedded and tend to not swap much (if at all) so we probably rarely hit\nthe case where dirty is missing or young is missing, but I think Shan has\na piece of SW that can reliably reproduce it using a shared writable\nmapping \u0026 fork or something like that.\n\nOn archs who use SW tracking of dirty \u0026 young, a page without dirty is\neffectively mapped read-only and a page without young unaccessible in the\nPTE.\n\nAdditionally, some architectures might lazily flush the TLB when relaxing\nwrite protection (by doing only a local flush), and expect a fault to\ninvalidate the stale entry if it\u0027s still present on another processor.\n\nThe futex code assumes that if the \"in_atomic()\" access -EFAULT\u0027s, it can\n\"fix it up\" by causing get_user_pages() which would then be equivalent to\ntaking the fault.\n\nHowever that isn\u0027t the case. get_user_pages() will not call\nhandle_mm_fault() in the case where the PTE seems to have the right\npermissions, regardless of the dirty and young state. It will eventually\nupdate those bits ... in the struct page, but not in the PTE.\n\nAdditionally, it will not handle the lazy TLB flushing that can be\nrequired by some architectures in the fault case.\n\nBasically, gup is the wrong interface for the job. The patch provides a\nmore appropriate one which boils down to just calling handle_mm_fault()\nsince what we are trying to do is simulate a real page fault.\n\nThe futex code currently attempts to write to user memory within a\npagefault disabled section, and if that fails, tries to fix it up using\nget_user_pages().\n\nThis doesn\u0027t work on archs where the dirty and young bits are maintained\nby software, since they will gate access permission in the TLB, and will\nnot be updated by gup().\n\nIn addition, there\u0027s an expectation on some archs that a spurious write\nfault triggers a local TLB flush, and that is missing from the picture as\nwell.\n\nI decided that adding those \"features\" to gup() would be too much for this\nalready too complex function, and instead added a new simpler\nfixup_user_fault() which is essentially a wrapper around handle_mm_fault()\nwhich the futex code can call.\n\n[akpm@linux-foundation.org: coding-style fixes]\n[akpm@linux-foundation.org: fix some nits Darren saw, fiddle comment layout]\nSigned-off-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nReported-by: Shan Hai \u003chaishan.bai@gmail.com\u003e\nTested-by: Shan Hai \u003chaishan.bai@gmail.com\u003e\nCc: David Laight \u003cDavid.Laight@ACULAB.COM\u003e\nAcked-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Darren Hart \u003cdarren.hart@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "892cd4a38f0d379dfdbc1a0a45eaa31a89976796", "tree": "edc8337ed3451ff819dc20e3436b5019479b6c87", "parents": [ "f45c1d4647a37feee31f4bca9ebd9b90ebdc98a3" ], "author": { "name": "Peng Tao", "email": "peng_tao@emc.com", "time": "Sat Jul 30 20:52:33 2011 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Aug 04 21:58:37 2011 -0700" }, "message": "pnfs: let layoutcommit handle a list of lseg\n\ncommit a9bae5666d0510ad69bdb437371c9a3e6b770705 upstream.\n\nThere can be multiple lseg per file, so layoutcommit should be\nable to handle it.\n\n[Needed in v3.0]\nSigned-off-by: Peng Tao \u003cpeng_tao@emc.com\u003e\nSigned-off-by: Boaz Harrosh \u003cbharrosh@panasas.com\u003e\nSigned-off-by: Jim Rees \u003crees@umich.edu\u003e\nSigned-off-by: Trond Myklebust \u003cTrond.Myklebust@netapp.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "6f437783919467437f19ec534a0317aef2fd2584", "tree": "01e8500766574786b1fd63e9a3090ac2c45777f9", "parents": [ "63ab4325d0df2ccefaeb932210d4046f2223e338" ], "author": { "name": "Stefan Richter", "email": "stefanr@s5r6.in-berlin.de", "time": "Sat Jul 09 16:43:22 2011 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Aug 04 21:58:34 2011 -0700" }, "message": "firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing\n\ncommit 93b37905f70083d6143f5f4dba0a45cc64379a62 upstream.\n\nBetween open(2) of a /dev/fw* and the first FW_CDEV_IOC_GET_INFO\nioctl(2) on it, the kernel already queues FW_CDEV_EVENT_BUS_RESET events\nto be read(2) by the client. The get_info ioctl is practically always\nissued right away after open, hence this condition only occurs if the\nclient opens during a bus reset, especially during a rapid series of bus\nresets.\n\nThe problem with this condition is twofold:\n\n - These bus reset events carry the (as yet undocumented) @closure\n value of 0. But it is not the kernel\u0027s place to choose closures;\n they are privat to the client. E.g., this 0 value forced from the\n kernel makes it unsafe for clients to dereference it as a pointer to\n a closure object without NULL pointer check.\n\n - It is impossible for clients to determine the relative order of bus\n reset events from get_info ioctl(2) versus those from read(2),\n except in one way: By comparison of closure values. Again, such a\n procedure imposes complexity on clients and reduces freedom in use\n of the bus reset closure.\n\nSo, change the ABI to suppress queuing of bus reset events before the\nfirst FW_CDEV_IOC_GET_INFO ioctl was issued by the client.\n\nNote, this ABI change cannot be version-controlled. The kernel cannot\ndistinguish old from new clients before the first FW_CDEV_IOC_GET_INFO\nioctl.\n\nWe will try to back-merge this change into currently maintained stable/\nlongterm series, and we only document the new behaviour. The old\nbehavior is now considered a kernel bug, which it basically is.\n\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\nCc: \u003cstable@kernel.org\u003e\n\n" }, { "commit": "97edbc901240090ca75b81aa8955bcef8d570434", "tree": "98938f16e4c6cc3faf2cbe6cf66d75f7f731f769", "parents": [ "bde99f604b42182e590ac4b7176b5235321bc94c" ], "author": { "name": "Herbert Xu", "email": "herbert@gondor.apana.org.au", "time": "Wed Jul 27 06:16:28 2011 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Aug 04 21:58:31 2011 -0700" }, "message": "gro: Only reset frag0 when skb can be pulled\n\ncommit 17dd759c67f21e34f2156abcf415e1f60605a188 upstream.\n\nCurrently skb_gro_header_slow unconditionally resets frag0 and\nfrag0_len. However, when we can\u0027t pull on the skb this leaves\nthe GRO fields in an inconsistent state.\n\nThis patch fixes this by only resetting those fields after the\npskb_may_pull test.\n\nSigned-off-by: Herbert Xu \u003cherbert@gondor.apana.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "a956f9e3987c7f4ebe47049fcf713e5a7f8a5a0d", "tree": "44521c69833b0085a12005f62e0ce423f1097965", "parents": [ "87ce3c5305eac29aee5090a3b57bbe1649fae180" ], "author": { "name": "Axel Castaneda Gonzalez", "email": "x0055901@ti.com", "time": "Wed Feb 23 20:08:28 2011 -0600" }, "committer": { "name": "Sebastien Guiriec", "email": "s-guiriec@ti.com", "time": "Sun Jul 24 21:31:55 2011 +0200" }, "message": "ASoC: twl6040: Configure ramp step based on platform\n\nEnable ramp down/up step to be configured based on\nplatform.\n\nSigned-off-by: Axel Castaneda Gonzalez \u003cx0055901@ti.com\u003e\nSigned-off-by: Misael Lopez Cruz \u003cmisael.lopez@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "95ed04e15e254297044cf92ae495e8f95e3d0d7b", "tree": "de1733d6892b3575a801768841978770ee0df3cb", "parents": [ "b62eea9d69b7bd35d83dc81f6c7da00136010ae9" ], "author": { "name": "Misael Lopez Cruz", "email": "misael.lopez@ti.com", "time": "Sun May 01 03:51:24 2011 -0500" }, "committer": { "name": "Sebastien Guiriec", "email": "s-guiriec@ti.com", "time": "Sun Jul 24 21:31:54 2011 +0200" }, "message": "input: Add initial support for TWL6040 vibrator\n\nAdd twl6040_vibra as a child of MFD device twl6040_codec. This\nimplementation covers the PCM-to-PWM mode of TWL6040 vibrator\nmodule.\n\nSigned-off-by: Misael Lopez Cruz \u003cmisael.lopez@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nCC: Tejun Heo \u003ctj@kernel.org\u003e\n" }, { "commit": "3c9d7a18427b28721741df2f84e9f4f167e5a523", "tree": "fc839c8bd61372827ee9afa61ae1a65d6ac0e2e2", "parents": [ "be206b3963a5904fc362827bf96b98db6fac31ac" ], "author": { "name": "Misael Lopez Cruz", "email": "misael.lopez@ti.com", "time": "Wed Apr 27 02:14:07 2011 -0500" }, "committer": { "name": "Sebastien Guiriec", "email": "s-guiriec@ti.com", "time": "Sun Jul 24 21:31:53 2011 +0200" }, "message": "mfd: twl6040: Add initial support\n\nTWL6040 IC provides analog high-end audio codec functions for\nhandset applications. It contains several audio analog inputs\nand outputs as well as vibrator support. It\u0027s connected to the\nhost processor via PDM interface for audio data communication.\nThe audio modules are controlled by internal registers that\ncan be accessed by I2C and PDM interface.\n\nTWL6040 MFD will be registered as a child of TWL-CORE, and will\nhave two children of its own: twl6040-codec and twl6040-vibra.\n\nThis driver is based on TWL4030 and WM8350 MFD drivers.\n\nSigned-off-by: Misael Lopez Cruz \u003cmisael.lopez@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\n" }, { "commit": "be206b3963a5904fc362827bf96b98db6fac31ac", "tree": "9c9e1bcde76e1dab1b66c38f2f165f1a304a2f93", "parents": [ "d189dd57aa925949a458313e8be10420caa4823a" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Tue May 31 15:21:13 2011 +0300" }, "committer": { "name": "Sebastien Guiriec", "email": "s-guiriec@ti.com", "time": "Sun Jul 24 21:31:53 2011 +0200" }, "message": "MFD: twl4030-audio: Rename platform data\n\nAllign the platform data names for twl4030 audio submodule:\ntwl4030_audio_data: for the core MFD driver\ntwl4030_codec_data: for ASoC codec driver\ntwl4030_vibra_data: for the input/ForceFeedback driver\n\nTo avoid breakage, change all depending drivers, files\nto use the new types.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\n" }, { "commit": "d189dd57aa925949a458313e8be10420caa4823a", "tree": "4b7d61057d209e67a8e5c8caa214ff8dd051d5f2", "parents": [ "918360729203d9c148adbfbe2cfbd186b80e096f" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Tue May 31 12:02:49 2011 +0300" }, "committer": { "name": "Sebastien Guiriec", "email": "s-guiriec@ti.com", "time": "Sun Jul 24 21:31:53 2011 +0200" }, "message": "MFD: twl4030-codec -\u003e twl4030-audio: Rename the driver\n\nRename the driver, and header file from twl4030-codec to\ntwl4030-audio.\nTo avoid breakage change depending drivers at the same time.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nCC: Misael Lopez Cruz \u003cmisael.lopez@ti.com\u003e\n" }, { "commit": "0b893f0f37736c1e26655f04d51706dfba417171", "tree": "05cb4754030b59b9ed6a72843b830098ae8f056c", "parents": [ "c477e60b6689d36121f7cabaea449c4014705078" ], "author": { "name": "JP Abgrall", "email": "jpa@google.com", "time": "Sun Jul 17 16:07:23 2011 -0700" }, "committer": { "name": "JP Abgrall", "email": "jpa@google.com", "time": "Thu Jul 21 18:04:46 2011 -0700" }, "message": "netfilter: xt_qtaguid: add uid permission checks during ctrl/stats access\n\n* uid handling\n - Limit UID impersonation to processes with a gid in AID_NET_BW_ACCT.\n This affects socket tagging, and data removal.\n - Limit stats lookup to own uid or the process gid is in AID_NET_BW_STATS.\n This affects stats lookup.\n\n* allow pacifying the module\n Setting passive to Y/y will make the module return immediately on\n external stimulus.\n No more stats and silent success on ctrl writes.\n Mainly used when one suspects this module of misbehaving.\n\nChange-Id: I83990862d52a9b0922aca103a0f61375cddeb7c4\nSigned-off-by: JP Abgrall \u003cjpa@google.com\u003e\n" }, { "commit": "adf0760ceb775202fe7838c21eede5788f2ac31d", "tree": "be3d3c73b598d7af930e9cf5a3626c67873f0a0d", "parents": [ "fec502d9a18bbe8045c67bd4f9d3a1ade4e78555" ], "author": { "name": "Mike Lockwood", "email": "lockwood@android.com", "time": "Thu Jul 21 11:39:17 2011 -0700" }, "committer": { "name": "Mike Lockwood", "email": "lockwood@android.com", "time": "Thu Jul 21 15:26:03 2011 -0700" }, "message": "USB: gadget: f_accessory: Add ioctl to detect USB accessory attached at boot\n\nSigned-off-by: Mike Lockwood \u003clockwood@android.com\u003e\n" }, { "commit": "cf6ace16a3cd8b728fb0afa68368fd40bbeae19f", "tree": "489c64380668e8c5a29d3f36f37554e4b081a647", "parents": [ "acc11eab70591744369722280c9ce162a6193494", "d1e9ae47a0285d3f1699e8219ce50f656243b93f" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 20 15:56:25 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 20 15:56:25 2011 -0700" }, "message": "Merge branch \u0027core-urgent-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027core-urgent-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n signal: align __lock_task_sighand() irq disabling and RCU\n softirq,rcu: Inform RCU of irq_exit() activity\n sched: Add irq_{enter,exit}() to scheduler_ipi()\n rcu: protect __rcu_read_unlock() against scheduler-using irq handlers\n rcu: Streamline code produced by __rcu_read_unlock()\n rcu: Fix RCU_BOOST race handling current-\u003ercu_read_unlock_special\n rcu: decrease rcu_report_exp_rnp coupling with scheduler\n" }, { "commit": "d1e9ae47a0285d3f1699e8219ce50f656243b93f", "tree": "2f5a68b5ba1677bcd49ee759f09ffc5ccccb1455", "parents": [ "e6625fa48e6580a74b7e700efd7e6463e282810b", "a841796f11c90d53dbac773be56b04fbee8af272" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Jul 20 20:59:26 2011 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Jul 20 20:59:26 2011 +0200" }, "message": "Merge branch \u0027rcu/urgent\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/urgent\n" }, { "commit": "e3589f6c81e4764d32a25d2a2a0afe54fa344f5c", "tree": "414bf6bdbad3f04f629fa2a72254ea85acf723f4", "parents": [ "9c3f75cbd144014bea6af866a154cc2e73ab2287" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Fri Jul 15 10:35:52 2011 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Jul 20 18:32:41 2011 +0200" }, "message": "sched: Allow for overlapping sched_domain spans\n\nAllow for sched_domain spans that overlap by giving such domains their\nown sched_group list instead of sharing the sched_groups amongst\neach-other.\n\nThis is needed for machines with more than 16 nodes, because\nsched_domain_node_span() will generate a node mask from the\n16 nearest nodes without regard if these masks have any overlap.\n\nCurrently sched_domains have a sched_group that maps to their child\nsched_domain span, and since there is no overlap we share the\nsched_group between the sched_domains of the various CPUs. If however\nthere is overlap, we would need to link the sched_group list in\ndifferent ways for each cpu, and hence sharing isn\u0027t possible.\n\nIn order to solve this, allocate private sched_groups for each CPU\u0027s\nsched_domain but have the sched_groups share a sched_group_power\nstructure such that we can uniquely track the power.\n\nReported-and-tested-by: Anton Blanchard \u003canton@samba.org\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nLink: http://lkml.kernel.org/n/tip-08bxqw9wis3qti9u5inifh3y@git.kernel.org\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "9c3f75cbd144014bea6af866a154cc2e73ab2287", "tree": "2a565f7ff0820269973415c5605e313cfff903b4", "parents": [ "e6625fa48e6580a74b7e700efd7e6463e282810b" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Thu Jul 14 13:00:06 2011 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Jul 20 18:32:40 2011 +0200" }, "message": "sched: Break out cpu_power from the sched_group structure\n\nIn order to prepare for non-unique sched_groups per domain, we need to\ncarry the cpu_power elsewhere, so put a level of indirection in.\n\nReported-and-tested-by: Anton Blanchard \u003canton@samba.org\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nLink: http://lkml.kernel.org/n/tip-qkho2byuhe4482fuknss40ad@git.kernel.org\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "7765be2fec0f476fcd61812d5f9406b04c765020", "tree": "e89ccb3fbd5655090b05f608f8e1d39924f23a9a", "parents": [ "131906b0062ddde7f85bbe67754983c754648bd8" ], "author": { "name": "Paul E. McKenney", "email": "paul.mckenney@linaro.org", "time": "Thu Jul 14 12:24:11 2011 -0700" }, "committer": { "name": "Paul E. McKenney", "email": "paulmck@linux.vnet.ibm.com", "time": "Tue Jul 19 21:38:52 2011 -0700" }, "message": "rcu: Fix RCU_BOOST race handling current-\u003ercu_read_unlock_special\n\nThe RCU_BOOST commits for TREE_PREEMPT_RCU introduced an other-task\nwrite to a new RCU_READ_UNLOCK_BOOSTED bit in the task_struct structure\u0027s\n-\u003ercu_read_unlock_special field, but, as noted by Steven Rostedt, without\ncorrectly synchronizing all accesses to -\u003ercu_read_unlock_special.\nThis could result in bits in -\u003ercu_read_unlock_special being spuriously\nset and cleared due to conflicting accesses, which in turn could result\nin deadlocks between the rcu_node structure\u0027s -\u003elock and the scheduler\u0027s\nrq and pi locks. These deadlocks would result from RCU incorrectly\nbelieving that the just-ended RCU read-side critical section had been\npreempted and/or boosted. If that RCU read-side critical section was\nexecuted with either rq or pi locks held, RCU\u0027s ensuing (incorrect)\ncalls to the scheduler would cause the scheduler to attempt to once\nagain acquire the rq and pi locks, resulting in deadlock. More complex\ndeadlock cycles are also possible, involving multiple rq and pi locks\nas well as locks from multiple rcu_node structures.\n\nThis commit fixes synchronization by creating -\u003ercu_boosted field in\ntask_struct that is accessed and modified only when holding the -\u003elock\nin the rcu_node structure on which the task is queued (on that rcu_node\nstructure\u0027s -\u003eblkd_tasks list). This results in tasks accessing only\ntheir own current-\u003ercu_read_unlock_special fields, making unsynchronized\naccess once again legal, and keeping the rcu_read_unlock() fastpath free\nof atomic instructions and memory barriers.\n\nThe reason that the rcu_read_unlock() fastpath does not need to access\nthe new current-\u003ercu_boosted field is that this new field cannot\nbe non-zero unless the RCU_READ_UNLOCK_BLOCKED bit is set in the\ncurrent-\u003ercu_read_unlock_special field. Therefore, rcu_read_unlock()\nneed only test current-\u003ercu_read_unlock_special: if that is zero, then\ncurrent-\u003ercu_boosted must also be zero.\n\nThis bug does not affect TINY_PREEMPT_RCU because this implementation\nof RCU accesses current-\u003ercu_read_unlock_special with irqs disabled,\nthus preventing races on the !SMP systems that TINY_PREEMPT_RCU runs on.\n\nMaybe-reported-by: Dave Jones \u003cdavej@redhat.com\u003e\nMaybe-reported-by: Sergey Senozhatsky \u003csergey.senozhatsky@gmail.com\u003e\nReported-by: Steven Rostedt \u003crostedt@goodmis.org\u003e\nSigned-off-by: Paul E. McKenney \u003cpaul.mckenney@linaro.org\u003e\nSigned-off-by: Paul E. McKenney \u003cpaulmck@linux.vnet.ibm.com\u003e\nReviewed-by: Steven Rostedt \u003crostedt@goodmis.org\u003e\n" }, { "commit": "99ce39e359fa29e4b609a6a13485e7573eda5dfb", "tree": "16ef77877ebc3027ed68fb4672e16a0d8a50668b", "parents": [ "90e33f62e027d330485d03598e1b2d8db3ff031c" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Jul 05 23:42:37 2011 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Mon Jul 18 16:37:45 2011 -0600" }, "message": "dt: include linux/errno.h in linux/of_address.h\n\nof_address.h makes reference to some of the error code #defines, so it\nneeds to include errno.h. If CONFIG_PCI is not selected, then some files\nwill fail to compile.\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "90e33f62e027d330485d03598e1b2d8db3ff031c", "tree": "8dea43baa65a88ba28771a945f126a511024f804", "parents": [ "8c11642a50555e584774737f7c296f9aece310cf" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Jul 05 23:42:28 2011 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Mon Jul 18 16:32:26 2011 -0600" }, "message": "of/address: Add of_find_matching_node_by_address helper\n\nof_find_matching_node_by_address() can be used to find a device tree\nnode for a device at a specific address.\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "a07c7964a29b6dc515b120f1e1c223ac2f8666f5", "tree": "cf45e084be0437ca921c0623569932bf1d142c1d", "parents": [ "0b8f6273eb6fd0611849d6fb432151f04e042434" ], "author": { "name": "WANG Cong", "email": "xiyou.wangcong@gmail.com", "time": "Sat Jul 16 22:22:20 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jul 18 11:06:03 2011 -0700" }, "message": "include/linux/sdla.h: remove the prototype of sdla()\n\n`make headers_check` complains that\n\nlinux-2.6/usr/include/linux/sdla.h:116: userspace cannot reference\nfunction or variable defined in the kernel\n\nthis is due to that there is no such a kernel function,\n\nvoid sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet);\n\nI don\u0027t know why we have it in a kernel header, so remove it.\n\nSigned-off-by: WANG Cong \u003cxiyou.wangcong@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8c11642a50555e584774737f7c296f9aece310cf", "tree": "1ff8dfaf05479593ef2c50378a68dfc6aec495a5", "parents": [ "5d10302f46df1d9a85c34ea97f9b6c29e414482e", "620917de59eeb934b9f8cf35cc2d95c1ac8ed0fc" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri Jul 15 20:11:34 2011 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri Jul 15 20:11:34 2011 -0600" }, "message": "Merge commit \u0027v3.0-rc7\u0027 into devicetree/next\n" }, { "commit": "9a736a21691d48cc6e956ce8d49849823fd6af40", "tree": "e04b1bfcd4b39cb71c9213c0e0518bccd3a1d8e7", "parents": [ "ce4022b8d1c9e1b380dc5177f955bfe5f1327e3e" ], "author": { "name": "Todd Poynor", "email": "toddpoynor@google.com", "time": "Wed Jun 15 17:21:57 2011 -0700" }, "committer": { "name": "Todd Poynor", "email": "toddpoynor@google.com", "time": "Fri Jul 15 15:26:45 2011 -0700" }, "message": "Move x86_64 idle notifiers to generic\n\nMove the x86_64 idle notifiers originally by Andi Kleen and Venkatesh\nPallipadi to generic.\n\nChange-Id: Idf29cda15be151f494ff245933c12462643388d5\nAcked-by: Nicolas Pitre \u003cnicolas.pitre@linaro.org\u003e\nSigned-off-by: Todd Poynor \u003ctoddpoynor@google.com\u003e\n" }, { "commit": "ce4022b8d1c9e1b380dc5177f955bfe5f1327e3e", "tree": "932bd019c44b27ff5d33822206d1386f95eab70a", "parents": [ "f558e1e53997b661e85de0ba96c2596c9cc97b4f" ], "author": { "name": "Mike Lockwood", "email": "lockwood@android.com", "time": "Thu Jul 14 19:42:42 2011 -0400" }, "committer": { "name": "Mike Lockwood", "email": "lockwood@android.com", "time": "Fri Jul 15 17:18:14 2011 -0400" }, "message": "USB: gadget: f_mtp: Add support for sending MTP header during file transfer\n\nMTP_SEND_FILE_WITH_HEADER ioctl allows sending a file with the 12 byte header\nprepended at the beginning.\nThis is to allow MTP to use a single packet for the data phase instead of two.\n\nSigned-off-by: Mike Lockwood \u003clockwood@android.com\u003e\n" }, { "commit": "62f2a3a48bdc99822a24356e667e52c30df287c9", "tree": "acad792fc90ac7d55974729f3b591e75b0f591dd", "parents": [ "b73c43f884b1b26ef8e824a33f3924f92e493c11" ], "author": { "name": "Michał Mirosław", "email": "mirq-linux@rere.qmqm.pl", "time": "Wed Jul 13 14:10:29 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jul 14 15:18:49 2011 -0700" }, "message": "net: remove NETIF_F_ALL_TX_OFFLOADS\n\nThere is no software fallback implemented for SCTP or FCoE checksumming,\nand so it should not be passed on by software devices like bridge or bonding.\n\nFor VLAN devices, this is different. First, the driver for underlying device\nshould be prepared to get offloaded packets even when the feature is disabled\n(especially if it advertises it in vlan_features). Second, devices under\nVLANs do not get replaced without tearing down the VLAN first.\n\nThis fixes a mess I accidentally introduced while converting bonding to\nndo_fix_features.\n\nNETIF_F_SOFT_FEATURES are removed from BOND_VLAN_FEATURES because they\nare unused as of commit 712ae51afd.\n\nSigned-off-by: Michał Mirosław \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "51414d41084496aaefd06d7f19eb8206e8bfac2d", "tree": "31c7624d28a564e1cc918a30b8570a3c001a9c7c", "parents": [ "201f92e2ca789d529418da8fa027d5457f0df024", "f39b2dd9d065151a04f5996656d1f27a7eb32d45" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 13 16:47:31 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 13 16:47:31 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:\n mmc: core: Bus width testing needs to handle suspend/resume\n" }, { "commit": "f39b2dd9d065151a04f5996656d1f27a7eb32d45", "tree": "3801f7d6793529d737fcbfd6af05b6900ef2cd06", "parents": [ "c31b55cd4eaf050bb5a15bd8251da1b3c7edeb1c" ], "author": { "name": "Philip Rakity", "email": "prakity@marvell.com", "time": "Thu Jul 07 09:04:55 2011 -0700" }, "committer": { "name": "Chris Ball", "email": "cjb@laptop.org", "time": "Wed Jul 13 14:54:37 2011 -0400" }, "message": "mmc: core: Bus width testing needs to handle suspend/resume\n\nOn reading the ext_csd for the first time (in 1 bit mode), save the\next_csd information needed for bus width compare.\n\nOn every pass we make re-reading the ext_csd, compare the data\nagainst the saved ext_csd data.\n\nThis fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3\n(\"mmc: core: eMMC bus width may not work on all platforms\"), which\nincorrectly assumed we would be re-reading the ext_csd at resume-\ntime.\n\nSigned-off-by: Philip Rakity \u003cprakity@marvell.com\u003e\nTested-by: Jaehoon Chung \u003cjh80.chung@samsung.com\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n" }, { "commit": "bb5b603036b99d80527b222dc98eba4ee8341020", "tree": "dcce59f7dd49c7f3f40ccaa1973dae94381f8fff", "parents": [ "497f5982a7eae716267213a8fdc3ea4c6ac09e5e" ], "author": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Tue Jul 12 19:53:24 2011 -0700" }, "committer": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Tue Jul 12 22:58:35 2011 -0700" }, "message": "cgroup: Add generic cgroup subsystem permission checks\n\nRather than using explicit euid \u003d\u003d 0 checks when trying to move\ntasks into a cgroup via CFS, move permission checks into each\nspecific cgroup subsystem. If a subsystem does not specify a\n\u0027allow_attach\u0027 handler, then we fall back to doing our checks\nthe old way.\n\nUse the \u0027allow_attach\u0027 handler for the \u0027cpu\u0027 cgroup to allow\nnon-root processes to add arbitrary processes to a \u0027cpu\u0027 cgroup\nif it has the CAP_SYS_NICE capability set.\n\nThis version of the patch adds a \u0027allow_attach\u0027 handler instead\nof reusing the \u0027can_attach\u0027 handler. If the \u0027can_attach\u0027 handler\nis reused, a new cgroup that implements \u0027can_attach\u0027 but not\nthe permission checks could end up with no permission checks\nat all.\n\nChange-Id: Icfa950aa9321d1ceba362061d32dc7dfa2c64f0c\nOriginal-Author: San Mehat \u003csan@google.com\u003e\nSigned-off-by: Colin Cross \u003cccross@android.com\u003e\n" }, { "commit": "75c56a81116e51c5cf15c0641906d0745188cd16", "tree": "c1d8e7def5bbb099a39d5e9ccfb13508ea5ca46a", "parents": [ "b4294d618e8a19bb47826e51ae52b9fb2fe05f80", "620917de59eeb934b9f8cf35cc2d95c1ac8ed0fc" ], "author": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Tue Jul 12 20:10:37 2011 -0700" }, "committer": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Tue Jul 12 20:10:37 2011 -0700" }, "message": "Merge commit \u0027v3.0-rc7\u0027 into android-3.0\n" }, { "commit": "8d86e5f91440aa56a5df516bf58fe3883552ad56", "tree": "94c8aea597b9e1ade376743a3f8f830e5195fa57", "parents": [ "d93a881dd7d71ad0e6504af232be2795044ab686", "770e1ac5f29003fca18af4e67eb5a05ddb5b1491" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 12 14:21:19 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 12 14:21:19 2011 -0700" }, "message": "Merge branch \u0027merge\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc\n\n* \u0027merge\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:\n powerpc/mm: Fix memory_block_size_bytes() for non-pseries\n mm: Move definition of MIN_MEMORY_BLOCK_SIZE to a header\n" }, { "commit": "d93a881dd7d71ad0e6504af232be2795044ab686", "tree": "71fc6918e676a0cf53d585f5a253646a49b60c83", "parents": [ "d1ca1a004822983e2fc702d5382b4b9a5527cfbe", "24109afd17426e1a2b72141e4a2b730057e1a0ea" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 12 14:19:51 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 12 14:19:51 2011 -0700" }, "message": "Merge branch \u0027fixes\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc\n\n* \u0027fixes\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:\n pcmcia: pxa2xx/vpac270: free gpios on exist rather than requesting\n ARM: pxa/raumfeld: fix device name for codec ak4104\n ARM: pxa/raumfeld: display initialisation fixes\n ARM: pxa/raumfeld: adapt to upcoming hardware change\n ARM: pxa: fix gpio_to_chip() clash with gpiolib namespace\n genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)\n arm: mach-vt8500: add forgotten irq_data conversion\n ARM: pxa168: correct nand pmu setting\n ARM: pxa910: correct nand pmu setting\n ARM: pxa: fix PGSR register address calculation\n" }, { "commit": "a63fdc5156f2ef5690b6cf03d72b0c4917efbba7", "tree": "03d9b67a5d07ab9d805ea39db2f331740eba1d4c", "parents": [ "620917de59eeb934b9f8cf35cc2d95c1ac8ed0fc" ], "author": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Tue Jun 14 10:57:50 2011 +1000" }, "committer": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Tue Jul 12 11:08:01 2011 +1000" }, "message": "mm: Move definition of MIN_MEMORY_BLOCK_SIZE to a header\n\nThe macro MIN_MEMORY_BLOCK_SIZE is currently defined twice in two .c\nfiles, and I need it in a third one to fix a powerpc bug, so let\u0027s\nfirst move it into a header\n\nSigned-off-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "511b7e32086dc7f9c18341f8702745e7ce092354", "tree": "9f74cee6965c784d2fd2a98b93ee8f1aaa7a9196", "parents": [ "ab246b81fb40a587e89f281fe9255833b7540220" ], "author": { "name": "JP Abgrall", "email": "jpa@google.com", "time": "Tue Jun 21 11:14:49 2011 -0700" }, "committer": { "name": "JP Abgrall", "email": "jpa@google.com", "time": "Mon Jul 11 16:39:01 2011 -0700" }, "message": "netfilter: adding the original quota2 from xtables-addons\n\nThe original xt_quota in the kernel is plain broken:\n - counts quota at a per CPU level\n (was written back when ubiquitous SMP was just a dream)\n - provides no way to count across IPV4/IPV6.\n\nThis patch is the original unaltered code from:\n http://sourceforge.net/projects/xtables-addons\n\n at commit e84391ce665cef046967f796dd91026851d6bbf3\n\nChange-Id: I19d49858840effee9ecf6cff03c23b45a97efdeb\nSigned-off-by: JP Abgrall \u003cjpa@google.com\u003e\n" }, { "commit": "ab246b81fb40a587e89f281fe9255833b7540220", "tree": "0434320e4a18914f566811227e22886cea99622f", "parents": [ "2fc52d645892c7a5fb9915b09351f934ea03f15d" ], "author": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Fri Jun 24 15:58:51 2011 -0700" }, "committer": { "name": "Dima Zavin", "email": "dima@android.com", "time": "Mon Jul 11 15:30:10 2011 -0700" }, "message": "USB: otg: add otg id notifier utiltiies\n\nAdd a otg_id notifier to allow multiple drivers to cooperate to\ndetermine the type of cable connected to a USB connector without\nrequiring direct calls between the drivers.\n\nChange-Id: Ic5675f1a89daf85b17336765de24e4bdb6df6348\nSigned-off-by: Colin Cross \u003cccross@android.com\u003e\n" }, { "commit": "2fc52d645892c7a5fb9915b09351f934ea03f15d", "tree": "877aca8c73506a143c85ab7fc1f35859886368fa", "parents": [ "89daa34bcd42062221247172ea2653521dc89e6c" ], "author": { "name": "Dima Zavin", "email": "dima@android.com", "time": "Thu Jul 07 23:20:27 2011 -0700" }, "committer": { "name": "Dima Zavin", "email": "dima@android.com", "time": "Mon Jul 11 15:30:09 2011 -0700" }, "message": "pda_power: add support for using otg transceiver events\n\nIf the platform data sets the use_otg_notifier flag,\nthe driver will now register an otg notifier callback and listen\nto transceiver events for AC/USB plug-in events instead. This would\nnormally be used by not specifying is_xx_online callbacks and\nnot specifying any irqs so the state machine is completely driven\nfrom OTG xceiver events.\n\nChange-Id: Ic4b3bc4010f299156e41fd2411696c7ff5a88e92\nSigned-off-by: Dima Zavin \u003cdima@android.com\u003e\n" }, { "commit": "f607e7fc5fb94d92030c4527287e9c149ddf9e65", "tree": "49ac9020b87f028e947580425fef84222332fdf8", "parents": [ "453a9bf347f1e22a5bb3605ced43b2366921221d" ], "author": { "name": "Jean-François Dagenais", "email": "dagenaisj@sonatest.com", "time": "Fri Jul 08 15:39:44 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jul 08 21:14:44 2011 -0700" }, "message": "w1: ds1wm: add a reset recovery parameter\n\nThis fixes a regression in 3.0 reported by Paul Parsons regarding the\nremoval of the msleep(1) in the ds1wm_reset() function:\n\n: The linux-3.0-rc4 DS1WM 1-wire driver is logging \"bus error, retrying\"\n: error messages on an HP iPAQ hx4700 PDA (XScale-PXA270):\n:\n: \u003csnip\u003e\n: Driver for 1-wire Dallas network protocol.\n: DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko\n: 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko\n: ds1wm ds1wm: pass: 1 bus error, retrying\n: ds1wm ds1wm: pass: 2 bus error, retrying\n: ds1wm ds1wm: pass: 3 bus error, retrying\n: ds1wm ds1wm: pass: 4 bus error, retrying\n: ds1wm ds1wm: pass: 5 bus error, retrying\n: ...\n:\n: The visible result is that the battery charging LED is erratic; sometimes\n: it works, mostly it doesn\u0027t.\n:\n: The linux-2.6.39 DS1WM 1-wire driver worked OK. I haven\u0027t tried 3.0-rc1,\n: 3.0-rc2, or 3.0-rc3.\n\nThis sleep should not be required on normal circuitry provided the\npull-ups on the bus are correctly adapted to the slaves. Unfortunately,\nthis is not always the case. The sleep is restored but as a parameter to\nthe probe function in the pdata.\n\n[akpm@linux-foundation.org: coding-style fixes]\nReported-by: Paul Parsons \u003clost.distance@yahoo.com\u003e\nTested-by: Paul Parsons \u003clost.distance@yahoo.com\u003e\nSigned-off-by: Jean-François Dagenais \u003cdagenaisj@sonatest.com\u003e\nCc: Evgeniy Polyakov \u003cjohnpol@2ka.mipt.ru\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" } ], "next": "0226f8a76da6bc97c9bb4af3fd2f6eeb03c5b0b0" }