)]}' { "log": [ { "commit": "42de241df9046ca1e9c17543eb1285f4e86ddf4e", "tree": "49dff2849abc0164f98c078d26dd2312a0586aa5", "parents": [ "729f8bf2d3464efec40b7d68d9db76c7219efa28" ], "author": { "name": "Mohan Kumar Gubbihalli Lachma Naik", "email": "mgubbi@codeaurora.org", "time": "Fri Oct 26 17:55:27 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:17 2012 -0800" }, "message": "msm: vidc: Set dpb count for smooth streaming\n\nThe min_dpb required for smooth streaming is set for the\nmax requirement of 1080p playback session. This is set in\nvidc platform data in the device file.\n\n(cherry picked from commit 885fcc57354cd309f5ed0356da486d1e130b9ad7)\nCRs-fixed: 408738\nSigned-off-by: Mohan Kumar Gubbihalli Lachma Naik \u003cmgubbi@codeaurora.org\u003e\n\nChange-Id: I38c3c9931f573cb029871bd48fd161f2158e139e\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "729f8bf2d3464efec40b7d68d9db76c7219efa28", "tree": "90a03b1a4184345cd55b6629d2ee12870beade8d", "parents": [ "be4e313905d9a76dfa299958a228733a45895cc9" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Tue Oct 09 12:34:44 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:16 2012 -0800" }, "message": "ASoC: WCD9304: Wait for earpiece PA to settle down\n\nDuring playback of audio on earpiece path, the PA on the path\nis the last component to be turned on. The turn on of PA can\ncause a glitch in the output signal because the level of the PA\nis not yet settled. Waiting for 20 msec after turning on the PA\navoids this glitch.\n\nCRs-fixed: 417031\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n(cherry picked from commit 1fa994d4aa256a536523f116232c4822b3495400)\n\nChange-Id: Iaa7a47526c71d8b037df3d09cf30ede296c21356\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "be4e313905d9a76dfa299958a228733a45895cc9", "tree": "68fb713edc43ce7eb20c70f520b99cb9a31cad16", "parents": [ "2226d263ff3f0dcd49e2f85d97e703d19044cc4c" ], "author": { "name": "Pratibhasagar V", "email": "pratibha@codeaurora.org", "time": "Thu Sep 20 19:46:11 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:16 2012 -0800" }, "message": "mmc: msm_sdcc: Reset interrupt MASK register (MCI_MASK0) on powering off\n\nIn one corner case, the SD card is stuck in a bad state with its DAT0\nline pulled low, and SDCC is waiting on the interrupt when the line\ngoes back high. But due its bad state eventually the SD card is removed\nfrom the system.\n\nLater during re-scanning of the devices, the SD card is power-cycled and\nadded to the system. But now the pending interrupts for SD card is\nreceived as the interrupt MASK register (MCI_MASK0) was not cleared.\n\nTo prevent such cases reset the interrupt MASK register (MCI_MASK0) while\npowering off to prevent any pending interrupts after power-cycle.\n(cherry picked from commit a3f8f793b21782c79a9fcc5f7aa1cc27fcbf246e)\nCRs-Fixed: 396706\nSigned-off-by: Pratibhasagar V \u003cpratibha@codeaurora.org\u003e\n\nChange-Id: Idfae18895abf47769328b0a768f83eba2ef573f7\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "2226d263ff3f0dcd49e2f85d97e703d19044cc4c", "tree": "00437c0144dd176f6b0630012638efaaef5ec9a3", "parents": [ "1454bc830613871a47e67cab10c14af80c2d4e61" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Tue Oct 09 20:01:56 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:15 2012 -0800" }, "message": "mmc: msm_sdcc: set DDR timing mode before setting the clock rate\n\nSetting DDR timing mode in controller before setting the clock\nrate will make sure that card don\u0027t see the double clock rate\neven for very small amount duration. Some eMMC cards seems to lock\nup if they see clock frequency \u003e 52MHz.\n(cherry picked from commit 2877d919135791d5223a9ba94b2cfc9ba50bc3df)\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n\nChange-Id: I7a4ace461e2def6d53863db4b768ec7e497b3095\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "1454bc830613871a47e67cab10c14af80c2d4e61", "tree": "35ce1aaa8425a744b8cdf78a70bf7ed2edd134af", "parents": [ "ebbf212d7b08f7b8de515c294fdb288f07d02fd9" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Oct 01 11:12:59 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:15 2012 -0800" }, "message": "power: pm8921-charger: Fix bug in current limit lookup\n\nIn the usb_ma_table there exist two consecutive values\nthat have IUSB_FINE_RES bit set. Some functions\nincorrectly assume that this does not happen.\n\nFix this by checking for consecutive values having\nIUSB_FINE_IRES bit set.\n(cherry picked from commit 67ebde08e12d246302d133b4510d59c8f96325d1)\nCRs-Fixed: 404348\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n\nChange-Id: I6b6ca96b92ec4b9765e4812352057a0ac8cff380\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "ebbf212d7b08f7b8de515c294fdb288f07d02fd9", "tree": "dd11ef986a09a3540bae1af50458d1e6a9953543", "parents": [ "50cf2fc014fa5800db6edc2c9c5c5925638c206d" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Sat Sep 29 22:27:03 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:14 2012 -0800" }, "message": "msm: spm: Add msm_spm_get_vdd API\n\nAdd msm_spm_get_vdd() API to return the core active voltage\n\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n(cherry picked from commit 4133ba1e1c9384910cd6db56130b654af115651d)\n\nChange-Id: I76bcfbcb0eefda09757e9db86ba4adb76a44f2f7\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "50cf2fc014fa5800db6edc2c9c5c5925638c206d", "tree": "62c63c35f7777735e244d8f58a7fe46b4b87d4e2", "parents": [ "c114507cd208588d4d560d3286a086ea13133614" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Sep 18 19:11:59 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:14 2012 -0800" }, "message": "msm: krait-l2-accessors: Remove workaround for 8064 Krait errata\n\nThis workaround can be removed in favor of an alternate solution\nimplemented in the power-collapse path which backs up the\ncorruptable L2CPUCPMR and L2CPMR registers before L2 power-collase\nand restores them afterwards.\n\nCRs-Fixed: 400700\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n(cherry picked from commit aa48fc35e051363b997bd33928796e3e84d08d88)\n\nSigned-off-by: Ram Kumar Chakravarthy Chebathini \u003crcheba@codeaurora.org\u003e\n\nChange-Id: I4a9962d95a4a7a835042dde91eee6b89754ea86b\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "c114507cd208588d4d560d3286a086ea13133614", "tree": "385b852f92f5885b223503aeec7c8c1ae5da4e6c", "parents": [ "03675a162119c39be91f1daf75d78a954bb12a1b" ], "author": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Wed Oct 24 13:53:48 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:13 2012 -0800" }, "message": "msm: avs: Add API to restore the AVSCSR register\n\nDuring power collapse, the AVSCSR register is always enabled and never\nrestored. This could result in AVS getting enabled on resume, when the\ncore is running at a frequency that doesn\u0027t support AVS.\n\nAdd new API, avs_enable, which restores the AVSCSR register based on the\nsaved AVSCSR register. Update the avs_disable API, to return the\nAVSCSR register value prior to disabling the AVS.\n\n(cherry picked from commit ad138da17fe08d46412d56b84309c5d17f7d5931)\n\nSigned-off-by: Mahesh Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n\nChange-Id: I2bd2e1d6aea058e0f44c474da6c3121654f1236e\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "03675a162119c39be91f1daf75d78a954bb12a1b", "tree": "6a800c4581ba9e75db0b22429009a5c2ee46bb93", "parents": [ "395a90f0bc84ab77b3a8879830fbbe67c6870760" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Wed Nov 07 11:52:44 2012 -0800" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:13 2012 -0800" }, "message": "crypto: Add wait states for hash/hmac operations\n\nCurrently, hash (SHA1/256/hmac) operation occasionally results\nin an incorrect hash value. This is due to the premature reading\nof the AUTH_IV register done before the last SHA block is processed.\nThere needs to be enough delay (wait states) before the AUTH_IV\nregister is read to extract the hash value.\n\nThe current implementation has 2 wait states. Adding 2 more wait states\nfor hash operations, resolves the issue.\n\nThe wait states are calculated based on the inputs from the hardware\nteam with regards to the time taken to process the last block of 16\nbytes of the data packet.\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n\nChange-Id: I82936441429560e41f25a98994d49a0113eb8de2\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "395a90f0bc84ab77b3a8879830fbbe67c6870760", "tree": "219ccc566efbc4590c4894a50dbcaf49a237b0e6", "parents": [ "988e443ad52c5e318848a80a14cba1485d0be0ec" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Thu Oct 11 19:51:25 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:12 2012 -0800" }, "message": "msm: audio: qdsp6v2: Set end of frame flag to avoid aac multiseek issue\n\n- During aac playback, multiple seek lead to target freeze.\n- DSP starts decoding when internal buffer size maximum is\n reached, hence, if there are corrupted frames in that buffer,\n the entire set will not be decoded. This results in target freeze.\n- Fix is to set the end of frame flag in the buffers that\n are sent to DSP for decoding.\n\n(cherry picked from commit 08508ac42fed7b1e3a7a9b7e098dfb4ceff8b836)\n\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n\nChange-Id: Ic34272222dcb1df42d7e2fe5d028d513b8cf452f\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "988e443ad52c5e318848a80a14cba1485d0be0ec", "tree": "84cbacca88af9ff7723c3bfb561f60428d08e209", "parents": [ "72abe0d7b7935d308f8e79e8975f24996dcc3522" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Oct 10 23:36:20 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:12 2012 -0800" }, "message": "msm: clock-local: Add PXO rates for LPASS clocks on 8660, 8960, 8930, 8064\n\nLPASS clock are enabled out of reset on these SoCs, with PXO selected\nas their undivided source. Because PXO rates are not present in the\nfrequency tables however, these clocks fail to handoff with reason\n\u0027HANDOFF_UNKNOWN_RATE\u0027. As a result, clock_late_init() does not attempt\nto disable these clocks in lateinit.\n\nAdd PXO rates to the LPASS frequency tables so that handoff succeeds\nand, in lateinit, disables them if they are not used.\n\n(cherry picked from commit ac15a37fd85089a2aef16624140a5d0a6cd1d71b)\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n\nChange-Id: Id8d674bfa3d41316be8aa14c5cc84baa77078d23\n\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "72abe0d7b7935d308f8e79e8975f24996dcc3522", "tree": "8b51f78e6697bd0a0eb0459007688590c122337b", "parents": [ "ee15930302a39f6e5b1036d98eb0edfe30e984e2", "d6556676aeefa9b4a89455ca4fca3cc86e97c3ed" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:49 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:49 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Turn on HDMI core only for supported resolution\" into jb_2.5" }, { "commit": "ee15930302a39f6e5b1036d98eb0edfe30e984e2", "tree": "2eafa0be5f759ef1b73dc170aeaa2272f2aa39e1", "parents": [ "27bf971ed837118a6ab9b4f0dd54571bc6800979", "1252b438fa0c58584012f5bbf05141b59a36d029" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:47 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:47 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Cleanup of HDMI switch device notifications\" into jb_2.5" }, { "commit": "27bf971ed837118a6ab9b4f0dd54571bc6800979", "tree": "1de892224687ae0b1c84338fdefff9a1e9cb6e38", "parents": [ "236845d1ff50ace3b9fced82451a828b1087214c", "cf44e5f654639430fb9536c2b5335f696fabd44f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:46 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:46 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Add support for HDMI audio switch device node\" into jb_2.5" }, { "commit": "236845d1ff50ace3b9fced82451a828b1087214c", "tree": "18d9039da7f45a935c6440242ae47d866c57bf1d", "parents": [ "ae760ef2f4a9fe31478f9c10215b7f252b94efe6", "9a2cdc337fb3b897863e0c4449d32e99bff8719f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:44 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:44 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Cleanup HDMI audio off sequence\" into jb_2.5" }, { "commit": "ae760ef2f4a9fe31478f9c10215b7f252b94efe6", "tree": "d9999d73cd8b85e9e09a2240d0a4f7b4337bd62b", "parents": [ "09081f31d01b2dabe7bc61c9eeaac9c521c9e754", "fe4fb27ebe49e8a94cad680fcd062fa20852c054" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:42 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:42 2012 -0800" }, "message": "Merge \"msm_fb: dtv: Serve device off in a separate thread\" into jb_2.5" }, { "commit": "09081f31d01b2dabe7bc61c9eeaac9c521c9e754", "tree": "9e7ef8b9b6bf1ca45494ab9b61e9f07008d13c4c", "parents": [ "5e69c31fcc7a9468a2a1edcdb583451d8d35394b", "cddf7f62362f385702a69c9c224289fc0a51bc1a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:41 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:41 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Cleanup HPD software debouncing logic\" into jb_2.5" }, { "commit": "5e69c31fcc7a9468a2a1edcdb583451d8d35394b", "tree": "3309b548d22c628c5934bd72de623816d74390c2", "parents": [ "69be5107cf7adeb9e0639e47b3399915951fb3e2", "347465306cbe3684c1b7a8ce31380cae2c0e27f5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:39 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:39 2012 -0800" }, "message": "Merge \"msm_fb: hdmi: black out pipes on unset\" into jb_2.5" }, { "commit": "69be5107cf7adeb9e0639e47b3399915951fb3e2", "tree": "53d2e24aaf51cb3c377ed8bcfd4be6192fc42c88", "parents": [ "232abcd5b9a0bf338eb4cec696887fade653266a", "a712fe7b1adad30ae73bb9c4a3e9d3ab9e437642" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:37 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:37 2012 -0800" }, "message": "Merge \"msm_fb: hdmi: Proper update of ACR CTRL Register\" into jb_2.5" }, { "commit": "232abcd5b9a0bf338eb4cec696887fade653266a", "tree": "7c49b88354341b6c804be26970ed8ea012633b8b", "parents": [ "b3a0ca653ae8f7eb5b5e69e485f6cd962b62957f", "454d607098e29d141d74f17e1e28c733b3e5bd56" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:36 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:36 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Remove HDCP Kernelconfig\" into jb_2.5" }, { "commit": "b3a0ca653ae8f7eb5b5e69e485f6cd962b62957f", "tree": "3a7df5afee9bfd5f4bb0617b51c7ee2324682907", "parents": [ "639f258f2a6fb97bb0dfb650a78489bd4bb60945", "40d9e8facd3daa9cf29424d09343f839e883405a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:34 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:34 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Driver changes to support HDCP module parameter\" into jb_2.5" }, { "commit": "639f258f2a6fb97bb0dfb650a78489bd4bb60945", "tree": "c85a50f780c18bbeb0538e00239648c446ba8690", "parents": [ "e305f6a6084819210aff5585df921ad33fd51854", "55134dcef28fef25f354fa3b553468fe71e99bb3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:32 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:32 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Add module parameter to disable HDCP\" into jb_2.5" }, { "commit": "e305f6a6084819210aff5585df921ad33fd51854", "tree": "f7cc1d1943809647effadcf398c1d158d59d4f6f", "parents": [ "24e30389c5f5f6a66b51410803dd772fc93c3863", "22ffc7df1557e09ebae2370193161822dd83089e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:30 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:30 2012 -0800" }, "message": "Merge changes I02d9814e,Ia0543e45 into jb_2.5\n\n* changes:\n msm_fb: hdmi: Soft debouncing logic improvements\n msm_fb: hdmi: Correct checksum value\n" }, { "commit": "24e30389c5f5f6a66b51410803dd772fc93c3863", "tree": "dcb2d2bd3f7fc1cc21a12de59c0ef61561efc1a0", "parents": [ "3331be1978c2bc1f0a8c0f95ad104d4413f2f3d3", "aaece71eaa304387f800eeb39bac0ac1d70cd68b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:28 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:28 2012 -0800" }, "message": "Merge \"Revert \"msm_fb: HDMI: Add support for hdmi_audio switch node\"\" into jb_2.5" }, { "commit": "3331be1978c2bc1f0a8c0f95ad104d4413f2f3d3", "tree": "86cb54554be44234ec4c2d89b38eb8eed2af6c96", "parents": [ "09705d69abdfd5cf31603bb62f9c301a91a486c9", "181fc587a179363624b9a3b47bcd0c04c05a8553" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 18:33:27 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 18:33:27 2012 -0800" }, "message": "Merge \"Bluetooth: Disable BlueZ driver/stack\" into jb_2.5" }, { "commit": "d6556676aeefa9b4a89455ca4fca3cc86e97c3ed", "tree": "2fbdf5c9ed92e52805a30f3f2a3a18b076e7a419", "parents": [ "1252b438fa0c58584012f5bbf05141b59a36d029" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Fri Nov 02 15:34:44 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:51 2012 -0800" }, "message": "msm_fb: HDMI: Turn on HDMI core only for supported resolution\n\nUpon receiving the notification of an HDMI cable connection,\nturn on HDMI core only if the default video resolution is\nsupported by the sink. Otherwise, HDMI core would be turned\non at a later time when it is configured with a supported\nresolution by the userspace.\n\nCRs-Fixed: 412575\nChange-Id: I67cfb09bafa39646839877a66cd94f193c127a76\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "1252b438fa0c58584012f5bbf05141b59a36d029", "tree": "53a0e9d3070b0f9ecd1770ac15695dd4cc46e373", "parents": [ "cf44e5f654639430fb9536c2b5335f696fabd44f" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Tue Oct 30 14:59:26 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:45 2012 -0800" }, "message": "msm_fb: HDMI: Cleanup of HDMI switch device notifications\n\nHDMI switch device is used to notify userspace components of the\navailabilty of a connected HDMI sink. These notification should\nonly be sent whenever HDMI cable is connected or disconnected.\nThis patch removes all the redundant notifications.\n\nCRs-Fixed: 412575\nChange-Id: Ia5e60690a87569fce5d61a9af75d446648443e9b\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "cf44e5f654639430fb9536c2b5335f696fabd44f", "tree": "026fe912fac45431a06a210171d83e2e6bdef13e", "parents": [ "9a2cdc337fb3b897863e0c4449d32e99bff8719f" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Fri Oct 26 18:11:23 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:39 2012 -0800" }, "message": "msm_fb: HDMI: Add support for HDMI audio switch device node\n\nAdd support for audio switch node in the HDMI driver that would\nbe used to notify audio userspace components of the availability\nof an HDMI device.\n\nCRs-Fixed: 412575\nChange-Id: Idc41caf234810db52af9fcc89d2ed4ecbcaafc3b\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "9a2cdc337fb3b897863e0c4449d32e99bff8719f", "tree": "2511ddd0565692b2cf9e257b807770888885ad3c", "parents": [ "fe4fb27ebe49e8a94cad680fcd062fa20852c054" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Fri Nov 02 14:32:41 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:34 2012 -0800" }, "message": "msm_fb: HDMI: Cleanup HDMI audio off sequence\n\nHDMI core should not be powered down until the audio engine has\nshutdown transmitting packets to the HDMI core. This change\nincreases the time for which the driver waits for the audio\nengine to turn off.\n\nCRs-Fixed: 412575\nChange-Id: Ie11ab6c8140f7289f74da4877c9acf9b8cd4a838\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "fe4fb27ebe49e8a94cad680fcd062fa20852c054", "tree": "f970d22c6257ffe5643cc36a5542d16aaa18ef29", "parents": [ "cddf7f62362f385702a69c9c224289fc0a51bc1a" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 07 18:27:23 2012 -0800" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:27 2012 -0800" }, "message": "msm_fb: dtv: Serve device off in a separate thread\n\nDTV device should not be powered down until the audio engine has\nshutdown. This change moves dtv audio off sequence to a separate\nthread so that framebuffer close system call does not get blocked.\n\nCRs-Fixed: 412575\nChange-Id: I246a9e58f1367e653913773696510f375abf3d3a\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "cddf7f62362f385702a69c9c224289fc0a51bc1a", "tree": "5cb1393355d42c863d7e366424f4d5bb17de19ca", "parents": [ "347465306cbe3684c1b7a8ce31380cae2c0e27f5" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Oct 31 16:26:41 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:14 2012 -0800" }, "message": "msm_fb: HDMI: Cleanup HPD software debouncing logic\n\nImplement Hot Plug Detect (HPD) software debouncing by\ndisabling the HPD interrupt until we finish processing\na previous HPD interrupt.\n\nCRs-Fixed: 412575\nChange-Id: Ia2c83f3446d09fe5bf6c6a1c4e6a9eb54ff465d6\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "347465306cbe3684c1b7a8ce31380cae2c0e27f5", "tree": "40aa339c4e8f9deec69ad4afad4ef621d3e6aa0b", "parents": [ "a712fe7b1adad30ae73bb9c4a3e9d3ab9e437642" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Sat Nov 03 02:39:20 2012 +0530" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:08 2012 -0800" }, "message": "msm_fb: hdmi: black out pipes on unset\n\nFor HDMI as primary case, we need to blackout the pipes\nwhen they are unset so that any residue is not visible\non the DTV during suspend.\n\nChange-Id: I2bf36f1002dd185c26fe6c4291977737daa73ae1\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "a712fe7b1adad30ae73bb9c4a3e9d3ab9e437642", "tree": "b77165b4e1a240b68cb39810a51048792d72a709", "parents": [ "454d607098e29d141d74f17e1e28c733b3e5bd56" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Fri Oct 12 19:06:16 2012 +0530" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:01 2012 -0800" }, "message": "msm_fb: hdmi: Proper update of ACR CTRL Register\n\nWhile changing the audio sampling rate, the older data in\nthe control register needs to cleaned before writing in\nnew data to avoid mixed or wrong data writing.\n\nCRs-Fixed: 405772\nChange-Id: I95d0807ea8cf544e4a0c8caed00de6cd60352efa\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "454d607098e29d141d74f17e1e28c733b3e5bd56", "tree": "2a7fd80826d28325dd84f5d70502ee697775c1be", "parents": [ "40d9e8facd3daa9cf29424d09343f839e883405a" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Sep 12 17:00:27 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:54 2012 -0800" }, "message": "msm_fb: HDMI: Remove HDCP Kernelconfig\n\nRemove the kernel config parameter for HDCP since enabling or\ndisabling HDCP will now be controlled using a corresponding\nmodule parameter.\n\nChange-Id: Iae23b8fa66ca75d99423547e77f850f3c86615ee\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "40d9e8facd3daa9cf29424d09343f839e883405a", "tree": "c226e38620e5d2fa384b68f64d66744a112c8f2a", "parents": [ "55134dcef28fef25f354fa3b553468fe71e99bb3" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Fri Sep 07 16:08:10 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:46 2012 -0800" }, "message": "msm_fb: HDMI: Driver changes to support HDCP module parameter\n\nThis change removes the need to use HDCP feature flags in the\nHDMI driver and adds the necessary support to configure HDCP\nfeature based on a module parameter.\n\nChange-Id: Ie0eacc5b447230927cfdedfcb979c22d60e81981\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "55134dcef28fef25f354fa3b553468fe71e99bb3", "tree": "ed54d319c6adbe162fc0270d5acca376e76578b1", "parents": [ "22ffc7df1557e09ebae2370193161822dd83089e" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Tue Sep 11 18:10:33 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:38 2012 -0800" }, "message": "msm_fb: HDMI: Add module parameter to disable HDCP\n\nThis change adds a module parameter that can be used\nto disable HDCP at runtime by specifying hdmi_msm.hdcp\u003d0\non the fastboot command line.\n\nChange-Id: Ifad5da9fcb86fb4ed663a5ef2bb14fe4dafd241e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "22ffc7df1557e09ebae2370193161822dd83089e", "tree": "09e5d9fca5cbfa211bc9d45124c12653983e6b80", "parents": [ "5e466b058599eaff2a9434ed883325b26b202f78" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Mon Jul 30 20:12:34 2012 +0530" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:30 2012 -0800" }, "message": "msm_fb: hdmi: Soft debouncing logic improvements\n\nCurrently, HPD(Hot Plug Detection, a module used for detecting\nHDMI cable connection) soft debouncing logic implements around\n1 sec mechanism to stabilize HPD event detection. In case of\nfast HPD connect/disconnect, it is missing a real HPD event.\nThis change implements a new debouncing logic in driver which\nwill make sure the first real HPD event is correctly processed\nand at the end of debouncing processing, if there is a change\nin HPD state, the changed state is also processed. This way we\nalways process the change of HPD states.\n\nCRs-Fixed: 384513\nChange-Id: I02d9814e4a55b7eec11a8e0d134c9ed9b5747422\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "5e466b058599eaff2a9434ed883325b26b202f78", "tree": "ba03a0e5bea00118942f91c432186e8015c83e8b", "parents": [ "aaece71eaa304387f800eeb39bac0ac1d70cd68b" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Mon Aug 27 11:07:32 2012 +0530" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:22 2012 -0800" }, "message": "msm_fb: hdmi: Correct checksum value\n\nThis change writes the checksum value to registers after\ndoing all the calculations so that the correct checksum\nvalue is transmitted.\n\nCRs-Fixed: 388272\nChange-Id: Ia0543e458d5a11b148bd29e0d57ae355a051b2a9\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "aaece71eaa304387f800eeb39bac0ac1d70cd68b", "tree": "a8d673e7f3ebb4c35103955c10ad5d997c471189", "parents": [ "65213ed8d0cc3459e7c39f140593a5f77c315ad7" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 11:46:21 2012 -0800" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:58:11 2012 -0800" }, "message": "Revert \"msm_fb: HDMI: Add support for hdmi_audio switch node\"\n\nThis reverts commit 99001c9c4fd2239a2af633471ef78eb8d569e60f.\n\nChange-Id: Id7532ba0b3141f7495a2742f747ce3f7e3f88c91\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "09705d69abdfd5cf31603bb62f9c301a91a486c9", "tree": "f5557e8cd30ccfda2b4b17a6c382a643986f4dc2", "parents": [ "3895ed2477425f5d99f92d20c50a20da0c197088", "01819963a0f309628b7cd8e4213d952974078ccf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 16:47:24 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 16:47:24 2012 -0800" }, "message": "Merge \"mfd: wcd9xxx: Add WCD9304 1.2 version codec chip entry\" into jb_2.5" }, { "commit": "3895ed2477425f5d99f92d20c50a20da0c197088", "tree": "ef934eb34caa489449fd7c58e694b5bd1ac96b5f", "parents": [ "5350694a7c85dcd1117a01b6b1207021f3ad1471", "a3ceef814051bee3fd849ccd0177847f82701dc1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 16:47:20 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 16:47:20 2012 -0800" }, "message": "Merge \"mfd: wcd9xxx: Check for wcd9xxx_read error\" into jb_2.5" }, { "commit": "5350694a7c85dcd1117a01b6b1207021f3ad1471", "tree": "6a0d8d56cab3043b293b435ad13d1daab5879205", "parents": [ "98c13b8c3339ac18e10d2669e43e731d043411d1", "5f8fc7ac58595d828e38e39c2fd67e2cb559b3cc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 16:47:17 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 16:47:17 2012 -0800" }, "message": "Merge \"mfd: wcd9xxx: Continue to probe codec without interrupt\" into jb_2.5" }, { "commit": "98c13b8c3339ac18e10d2669e43e731d043411d1", "tree": "b16fe9f9aef04f0cb8df42bf735ba170b5e6deaa", "parents": [ "65213ed8d0cc3459e7c39f140593a5f77c315ad7", "8530609eefc16add493bce6fbb55500e60b6bc9f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 16:47:13 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 16:47:13 2012 -0800" }, "message": "Merge \"ASoC: msm: reduce period_bytes_min for voice call\" into jb_2.5" }, { "commit": "01819963a0f309628b7cd8e4213d952974078ccf", "tree": "eda9d135619a01cc10f47b341133e76b8e934991", "parents": [ "a3ceef814051bee3fd849ccd0177847f82701dc1" ], "author": { "name": "Venkat Sudhir", "email": "vsudhir@codeaurora.org", "time": "Mon Oct 01 16:26:03 2012 -0700" }, "committer": { "name": "Mingming Yin", "email": "mingming@codeaurora.org", "time": "Tue Nov 20 17:19:28 2012 -0800" }, "message": "mfd: wcd9xxx: Add WCD9304 1.2 version codec chip entry\n\n-Add chip byte information for WCD9304 1.2 version.\n This information is required for correct detection\n of the codec at the codec init.\n-Fix code to exit codec init with error, if codec\n detection fails.\n\nChange-Id: I6b5522f6fb4d7b18011da2bedd322c4a480a5175\nSigned-off-by: Venkat Sudhir \u003cvsudhir@codeaurora.org\u003e\n" }, { "commit": "a3ceef814051bee3fd849ccd0177847f82701dc1", "tree": "8745bb42ab68a5d1461be6fa1e922931606b48dd", "parents": [ "5f8fc7ac58595d828e38e39c2fd67e2cb559b3cc" ], "author": { "name": "Venkat Sudhir", "email": "vsudhir@codeaurora.org", "time": "Thu Sep 06 11:27:32 2012 -0700" }, "committer": { "name": "Mingming Yin", "email": "mingming@codeaurora.org", "time": "Tue Nov 20 17:19:20 2012 -0800" }, "message": "mfd: wcd9xxx: Check for wcd9xxx_read error\n\nCheck for for wcd9xx read error properly during probe.\nMove the determination of codec type to function and\ncheck for interface error during read operation for\nI2C. Since slimbus master is changed the slim porbe\nmay be called later to I2C probe. Handle proper\nreleasing of reset gpio in case there was error\nfor I2C read.\n\nChange-Id: I6e8e271861e5bf7fee5df63b5ac265b7976f83d2\nSigned-off-by: Venkat Sudhir \u003cvsudhir@codeaurora.org\u003e\n" }, { "commit": "5f8fc7ac58595d828e38e39c2fd67e2cb559b3cc", "tree": "4c15c30d55d0c26aa9c5baf784a475f6130578c3", "parents": [ "65a49b99d1477fb62285fa65fce46fbc63f769c6" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Tue Aug 28 17:21:24 2012 -0700" }, "committer": { "name": "Mingming Yin", "email": "mingming@codeaurora.org", "time": "Tue Nov 20 17:19:05 2012 -0800" }, "message": "mfd: wcd9xxx: Continue to probe codec without interrupt\n\nDon\u0027t treat as an error when no interrupt is configured.\nInterrupts are not mandatory for codec driver and hardware.\n\nChange-Id: Ic54f2cdf6f4916db89700b745d82e199bdccf48c\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "65213ed8d0cc3459e7c39f140593a5f77c315ad7", "tree": "a8adf6ac6d06cb791b17a382b2fd908018e9359d", "parents": [ "c9f51b9b0353671662fed485932b48b4e89bd2dc" ], "author": { "name": "Patrick Daly", "email": "pdaly@codeaurora.org", "time": "Tue Aug 28 13:36:31 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:40:22 2012 -0800" }, "message": "msm: acpuclock-8930: Support PMIC 8917\n\nIf the PMIC 8917 device is detected, then enable s8 regulator\nbefore turning on the l23 hfpll regulator.\n\nUse platform_data to indicate presence of pm8917.\n\nChange-Id: Ic39b460d6de14d37b9ca477494c35d90c9468780\nSigned-off-by: Patrick Daly \u003cpdaly@codeaurora.org\u003e\n(cherry picked from commit 037d49156df9c34068c0942489c8ba24c52a4ad6)\n" }, { "commit": "c9f51b9b0353671662fed485932b48b4e89bd2dc", "tree": "3117bf133f191719bab5293f789731fdc5414258", "parents": [ "b1d5f753eecf794797961c5bfac5ba1aea113646" ], "author": { "name": "Patrick Daly", "email": "pdaly@codeaurora.org", "time": "Mon Aug 27 16:10:26 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:40:12 2012 -0800" }, "message": "msm: clock-8960: Support new PMIC 8917 for 8930\n\nSupport detection of PMIC device type from board file.\n\nEnable parent RPM_VREG_ID_PM8917_S8 regulator before turning on\nHF_PLL/SR2 pll regulator, similar to 8960.\n\nSigned-off-by: Patrick Daly \u003cpdaly@codeaurora.org\u003e\n(cherry picked from commit 1a3859fad1c2c0eb6f93464b9782fc0b1cb6ab14)\n\nChange-Id: Ic2786f5957f793db482ef09c17752e2decb34301\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n" }, { "commit": "b1d5f753eecf794797961c5bfac5ba1aea113646", "tree": "657f672384f93b5899f359dc5eff1faa7231b6ad", "parents": [ "a3b73c45f6264fb79d2cd030fdb75e7dede2ceed" ], "author": { "name": "Patrick Daly", "email": "pdaly@codeaurora.org", "time": "Mon Aug 27 16:25:07 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:40:02 2012 -0800" }, "message": "msm: board-8930: Detect PMIC 8917 device for initialization\n\nCall a different set of clock initialization functions if the 8917\npmic device is detected.\n\nChange-Id: I6e02e300c2f403248351831c2b18e620352dfcab\nSigned-off-by: Patrick Daly \u003cpdaly@codeaurora.org\u003e\n(cherry picked from commit 8fad60d97d663b8d0dd5e30c637d7433cf6b5502)\n" }, { "commit": "a3b73c45f6264fb79d2cd030fdb75e7dede2ceed", "tree": "a96c3c0d351ec705918a4af6735a415e38c1bd8f", "parents": [ "fa3d06deb4e2cf1e797fc6a4af796677d1e8560d" ], "author": { "name": "Patrick Daly", "email": "pdaly@codeaurora.org", "time": "Tue Aug 28 13:39:17 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:39:50 2012 -0800" }, "message": "msm: board-8930: Indicate presence of pm8917 to acpuclk driver\n\nSet a platform_data parameter if pm8917 is detected.\n\nChange-Id: Iba56e28f88162f73a2d499dfd1d9921ab29c44d0\nSigned-off-by: Patrick Daly \u003cpdaly@codeaurora.org\u003e\n(cherry picked from commit c1227cb45a8b17a10410db436a1c84893f500c34)\n" }, { "commit": "fa3d06deb4e2cf1e797fc6a4af796677d1e8560d", "tree": "a6a80a0440c19b308c88610fe2d30e36d5cc2a7d", "parents": [ "ccda9e709b64c884bada18f5548d778dcdd4afb3" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Oct 09 10:29:46 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:39:37 2012 -0800" }, "message": "msm: board-8930: Do not send PM8917 LDO 1 regulator request to RPM\n\nModify the PM8917 LDO 1 configuration data so that no request\nis sent automatically to enable LDO 1 on MSM8930 + PM8917\ntargets. This is an optimization which helps to achieve power\nsavings during XO shutdown.\n\nChange-Id: I87f89b03c43e60727737f22205745a4c911a14df\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit bd2f4f171852ce4e93b54b9d20c59d908cd50838)\n" }, { "commit": "ccda9e709b64c884bada18f5548d778dcdd4afb3", "tree": "9e39aaa16c5f7ac303bba54073ea5daf4f8794aa", "parents": [ "10bc20209fbff4c06c86dab653e39ebadcf2baee" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Oct 04 12:17:31 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:39:25 2012 -0800" }, "message": "msm: board-8930: Use auto mode for PM8917 SMPS 7\n\nChange the configuration of PM8917 SMPS 7 for MSM8930 so that RPM\nrequests are sent with a force mode of \u0027auto\u0027. This is needed in\norder to reduce power consumption when modem and LPASS are asleep.\n\nChange-Id: I4935cf53d9b5291291fe3ba42955af41080b0d33\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 6f250cd14c25c783c47fe35729ebc19480c45695)\n" }, { "commit": "10bc20209fbff4c06c86dab653e39ebadcf2baee", "tree": "5e4bc7628f21ab669d9665e8f1efc219deead190", "parents": [ "fafa952ec8b202a89918287d98b12106f7759fb5" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Oct 02 15:05:28 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:38:51 2012 -0800" }, "message": "msm: board-8064: Use 8960_PM8917 rpm-regulator version with PM8917\n\nUtilize the 8960_PM8917 rpm-regulator version when PM8917 is\ndetected so that the TCXO workaround is applied to PM8917\nregulators L25, L26, L27, and L28 on APQ8064 targets.\n\nChange-Id: Ie62f89fd534493cc74987d26c6746b2283f7963f\nCRs-Fixed: 405336\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit e93ed7dda0b0cc41033d28ce325a29022a47d984)\n" }, { "commit": "fafa952ec8b202a89918287d98b12106f7759fb5", "tree": "10f088ed84a9912d750e463db2e2cd82cfb30932", "parents": [ "2a23838947022a9914ca81a7b90affdd959e36ca" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Oct 02 14:56:21 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:38:39 2012 -0800" }, "message": "msm: rpm-regulator: Add PM8917 N1200 TCXO workaround support for 8960/8064\n\nAdd support into rpm-regulator-8960 for using the TCXO workaround\non PM8917 1200mA NLDOs on MSM8960 and APQ8064. PM8917 regulators\nL25, L26, L27, and L28 require that CXO be ON when they are\nenabled. Configure these regulators so that they operate\ncorrectly on systems which utilize TCXO.\n\nChange-Id: I7c25de3f32228c9a57ba4030211acb73ea7cbf5b\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 2ac36d590ecb7d9eb10c82ee7d5801a8ba436303)\n" }, { "commit": "2a23838947022a9914ca81a7b90affdd959e36ca", "tree": "61268bc500bb68425c58894d4f6b3b4ad9610f17", "parents": [ "b28275f314160376a7f5141632020473aa1a111c" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu May 31 10:21:33 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:38:26 2012 -0800" }, "message": "mfd: pm8xxx-misc: add PM8917 in PM8921 cases\n\nPM8917 is in the same family as PM8921. Add it in all cases of\nPM8921 where it applies.\n\nChange-Id: I2bf3937ed7e80355a8d5b330f18298bf040d585b\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit a813d5f4d82a2eedf7b8813fa03cf9e8af236a68)\n" }, { "commit": "b28275f314160376a7f5141632020473aa1a111c", "tree": "24a0f1a427a7053a2f916d835e72ebc152d7e233", "parents": [ "b2d799d95114a8abe864093017e572412b84da1d" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Mon Aug 13 12:32:12 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:38:13 2012 -0800" }, "message": "ASoC: msm8930: Add speaker playback support for 8930+8917\n\nPM8917 does not have speaker amplifier, hence the codec lineout\nis directed to the speaker through a onboard amplifier. The\namplifier needs to be enabled in order for speaker playback\nto work on a target with PM8917\n\nChange-Id: Ic9f16d335bc1a0cef6fb1eb93c1617fd086cc5b7\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n(cherry picked from commit f6d1f7261de810bb07429c25b99187328359b8c4)\n" }, { "commit": "b2d799d95114a8abe864093017e572412b84da1d", "tree": "1efbc05b50adca16e1737e1754b053c07ad63ad3", "parents": [ "ff4f9ce9cd059621b623c508917a17df1c5686ed" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri Aug 24 17:54:00 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:37:51 2012 -0800" }, "message": "msm: 8960/8064/8930: add has_dc_supply property.\n\nAll CDP platforms are powered by an external DC\nsupply. Hence set the has_dc_supply flag to\nallow the charger driver to handle it accordingly.\n\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n(cherry picked from commit b7bf2c9c3fd56d70bc90676c1781300c435a40fa)\n(cherry picked from commit bc24067bc9e696e4f43d555b2bba72539ceb3b35)\n\nChange-Id: If18f0172ebcd6e081da02de3f864f35094a02efc\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n" }, { "commit": "ff4f9ce9cd059621b623c508917a17df1c5686ed", "tree": "ab3cd1d1aa2e4e1a52d74d4fef401d8509cfb380", "parents": [ "054a5b70024f0821244d777a71915e57849921a6" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri Aug 24 15:11:23 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:37:03 2012 -0800" }, "message": "power: pm8921-charger: report DC online for some platforms.\n\nSome hardware platforms can supply VPH_PWR without battery\nor charger being present.\n\nTo avoid shutting down due to no connected power sources\nfrom the perspective of software set a flag that forces\nthe DC supply to be online for this type of platform.\n\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n(cherry picked from commit a3cf943ef8c91435e2cb94b8e8bcc482dc65cb27)\n\nConflicts:\n\n\tdrivers/power/pm8921-charger.c\n\nChange-Id: I565edb1ab797384481ce5e37aee73ee0a8e80428\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n" }, { "commit": "054a5b70024f0821244d777a71915e57849921a6", "tree": "aacab830620dd70061712c430a01ad30cccdab88", "parents": [ "7afbd4c5255f87e0e47116575a14eccb310ac563" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Aug 10 17:24:38 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:16:11 2012 -0800" }, "message": "msm: board-8930: Add backlight control when using PM8917\n\nUse PM8917 GPIO 24 to enable and disable the LCD backlight on\ntargets which use PM8917 as WLED is not available.\n\nChange-Id: Id2fa1bb01d174d38ee9d846261750e971a96cfd2\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 9898ac37c3cb68c0a2706b1496bb5e6c2dd8f667)\n" }, { "commit": "7afbd4c5255f87e0e47116575a14eccb310ac563", "tree": "22c25cb1daf50fc4c4f3101f9984da2edff7c31f", "parents": [ "c6e04698362b075a7f576471412c779b03fd8498" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 13 12:31:04 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:15:38 2012 -0800" }, "message": "msm: rpm-regulator: Add support for MSM8930 + PM8917\n\nWhen using PMIC PM8917 along with MSM8930, the RPM resource map\nchanges from that which is used with stock MSM8930 + PM8038. Add\nsupport for the new resource map.\n\nChange-Id: I4817872022f828dab055144959dfdfbd83e99e11\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit d2a4fefd4c6ca176715cb297edd63e141d19a4fb)\n" }, { "commit": "c6e04698362b075a7f576471412c779b03fd8498", "tree": "33a8c19f91c02f9a8ee8b8dee86f1b3c6804823f", "parents": [ "86161e4e83207c363150593c1a1caf13e62f2308" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Fri Aug 10 16:26:37 2012 -0600" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:15:00 2012 -0800" }, "message": "msm: rpm-8930: Add RPM enumeration to support PMIC 8917\n\nMSM8930 can support PMIC8917 in leiu of PM8038. Add RPM enumeration to\nsupport the new PMIC and use runtime detection to use the right\nenumeration data.\n\nChange-Id: Ibf287a99143ffd52934ce043be65cae0afa136c8\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n(cherry picked from commit 75b8c81615010a78c9efc309aa61afec1552b467)\n" }, { "commit": "86161e4e83207c363150593c1a1caf13e62f2308", "tree": "760a8693d1cf80d6d19787b1f5186842df882645", "parents": [ "044999878008949f066246333a85c03fd04e9506" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 20 12:17:09 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:14:07 2012 -0800" }, "message": "msm: board-8930: Add regulator board file for MSM8930+PM8917\n\nAdd the board file board-8930-regulator-pm8917.c to capture\nregulator configuration and mappings for MSM8930 targets which\nutilize a PM8917. Add code into other MSM8930 board files to\nconditionally switch to the new regulator configuration values\nif PM8917 is detected at runtime.\n\nChange-Id: I68c1025bae45d77d1a04a8935dc7ecb2d857b8ef\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 4614cb939178736abca452d468bd291272afbf86)\n" }, { "commit": "044999878008949f066246333a85c03fd04e9506", "tree": "4c93b0c462938e3b062c7a2b2f99045da0ae11fb", "parents": [ "65a49b99d1477fb62285fa65fce46fbc63f769c6" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 06 15:02:03 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:09:24 2012 -0800" }, "message": "msm: board-8930: Add support for PMIC PM8917\n\nAdd support for boards consisting of MSM8930 + PM8917.\nConditionally Remove configuration for peripherals not present in\nPM8917. Also remap GPIOs and MPPs as follows:\n\nGPIOs:\nPM8038 PM8917\n1 24\n2 25\n3 27\n4 19\n5 25\n6 23\n7 38\n8 28\n9 20\n10 36\n11 37\n12 21\n\nMPPs:\nPM8038 PM8917\n1 5\n2 6\n3 10\n4 8\n5 7\n6 9\n\nChange-Id: I38166aaa85271b9d7f857f27b070fc36a0d0a803\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit fd344aa2e4fc70cb33b0a0623577662288a7674e)\n" }, { "commit": "181fc587a179363624b9a3b47bcd0c04c05a8553", "tree": "c67440e114a5eba6ccf1e436122eb8285398f229", "parents": [ "65a49b99d1477fb62285fa65fce46fbc63f769c6" ], "author": { "name": "Sunny Kapdi", "email": "sunnyk@codeaurora.org", "time": "Fri Nov 16 17:59:19 2012 -0800" }, "committer": { "name": "Satish kumar sugasi", "email": "ssugas@codeaurora.org", "time": "Mon Nov 19 15:31:11 2012 -0800" }, "message": "Bluetooth: Disable BlueZ driver/stack\n\nDisable BlueZ\u0027s smd/uart transport driver and stack components in kernel.\n\nChange-Id: I0196f890c4d25bad6a7015da14ef99495cda0589\nSigned-off-by: Sunny Kapdi \u003csunnyk@codeaurora.org\u003e\n" }, { "commit": "8530609eefc16add493bce6fbb55500e60b6bc9f", "tree": "e3dd50eac9af5b87de3d9fd9da055bc33ed3e787", "parents": [ "65a49b99d1477fb62285fa65fce46fbc63f769c6" ], "author": { "name": "Mingming Yin", "email": "mingming@codeaurora.org", "time": "Mon Nov 19 11:52:51 2012 -0800" }, "committer": { "name": "Mingming Yin", "email": "mingming@codeaurora.org", "time": "Mon Nov 19 11:53:41 2012 -0800" }, "message": "ASoC: msm: reduce period_bytes_min for voice call\n\n- Allow smaller buffer size for voice call to\n comply with MR1 audio HAL\n\nChange-Id: Iaffca753ad07889b08ae4b6154e8d596950a979e\nSigned-off-by: Mingming Yin \u003cmingming@codeaurora.org\u003e\n" }, { "commit": "65a49b99d1477fb62285fa65fce46fbc63f769c6", "tree": "ab0a820f26b0c7bff17ad75e91833ff232c1b41c", "parents": [ "961c1e47e9af4200cd2a051d4146de9b6453a1ed", "5d40465821e8b0a556971d8f287a9bca143671a0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 15 23:06:53 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 15 23:06:53 2012 -0800" }, "message": "Merge changes I33252dff,I5d17bacf into jb_2.5\n\n* changes:\n msm: pm8921-chg: configure alarm voltage for 8930\n mfd: pm8038: Enable the battery alarm module\n" }, { "commit": "961c1e47e9af4200cd2a051d4146de9b6453a1ed", "tree": "661e47c8348341c7cc4716f5337ec6fbccc26fba", "parents": [ "1bba0d235b2eb3188e4cff3f1ed2b621ee742f78", "e0557a92e1149a0892c9314739cf37b6bec2c08e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 15 23:06:40 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 15 23:06:40 2012 -0800" }, "message": "Merge \"msm_fb: display: force mdp clock off at suspend\" into jb_2.5" }, { "commit": "1bba0d235b2eb3188e4cff3f1ed2b621ee742f78", "tree": "e690876e99f192913ba73de0ceabb9c09854bf2c", "parents": [ "0caf96fd5fc26b6a6e6653a0fe22b2f941571dad", "d786c55200ec5bb86f55b857438aa5a7d7c336d4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 15 23:06:30 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 15 23:06:30 2012 -0800" }, "message": "Merge \"msm_fb: display: fix dsi_busy_wait race condition\" into jb_2.5" }, { "commit": "0caf96fd5fc26b6a6e6653a0fe22b2f941571dad", "tree": "1e89ec2aca768efdde6979e038a39e8e707095c6", "parents": [ "c77e6771296faf44cba0b007cf8a53c539320210", "61140e3385a476c45bc31094040e6417a83f7989" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 15 23:06:20 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 15 23:06:20 2012 -0800" }, "message": "Merge \"msm_fb: display: add video mode dcs cmdlist support\" into jb_2.5" }, { "commit": "c77e6771296faf44cba0b007cf8a53c539320210", "tree": "c9d74bc10ce0bce05ea66ebe999f341077d6c0a2", "parents": [ "2b6dcf38208bbbdc492a20e5dca226efac82567d", "6307eb99e9f33e72730b50d15bd55d9f36567531" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 15 23:06:00 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 15 23:06:00 2012 -0800" }, "message": "Merge \"msm: kgsl: Move graphics device registration for 8960\" into jb_2.5" }, { "commit": "2b6dcf38208bbbdc492a20e5dca226efac82567d", "tree": "e2041fcc2e8938ed61b59166adf3bf8c4ea68db9", "parents": [ "e3142f99ee94737f8617b733051088df2559b523", "95f7f79a4fe7a0d8791a1be90f69c7e0184f09dd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 15 23:05:53 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 15 23:05:53 2012 -0800" }, "message": "Merge \"msm: kgsl: Set 8960PRO GPU chip id\" into jb_2.5" }, { "commit": "6307eb99e9f33e72730b50d15bd55d9f36567531", "tree": "c7f70249165c6d6a715375ff5572cae297e56bad", "parents": [ "95f7f79a4fe7a0d8791a1be90f69c7e0184f09dd" ], "author": { "name": "Carter Cooper", "email": "ccooper@codeaurora.org", "time": "Mon Aug 20 15:17:23 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Thu Nov 15 17:38:06 2012 -0800" }, "message": "msm: kgsl: Move graphics device registration for 8960\n\nMove all graphics device registration to one location. Always register\nthe 3D core. Register the 2D cores if they are present on the device.\n\nSigned-off-by: Carter Cooper \u003cccooper@codeaurora.org\u003e\n(cherry picked from commit 25555d8d29aff405bbd89076f8dd3538b8c24b80)\n\nChange-Id: I518f17f891ac86e7fde05a03c821e94683aedcf6\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "95f7f79a4fe7a0d8791a1be90f69c7e0184f09dd", "tree": "6b62f156d448b51f37dae291956bba9557131d75", "parents": [ "27c8a9efcf16c3e52e9f532f5059d4205a65c3ea" ], "author": { "name": "Carter Cooper", "email": "ccooper@codeaurora.org", "time": "Sun Aug 19 13:40:34 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Thu Nov 15 17:33:33 2012 -0800" }, "message": "msm: kgsl: Set 8960PRO GPU chip id\n\nThere are two versions of 8960. Set the 8960PRO chip id correctly.\nEnsure 8960 clock values do not get changed when the device is 8960PRO.\n\nSigned-off-by: Carter Cooper \u003cccooper@codeaurora.org\u003e\nChange-Id: I1d2226c389881f3cadb9067dc1393db168cef309\n\nConflicts:\n\n arch/arm/mach-msm/board-8960.c\n\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "5d40465821e8b0a556971d8f287a9bca143671a0", "tree": "093625e57231cc5e725cfa08933012363a545a43", "parents": [ "2beb127164dfff68339fa60ddc4203859a7c31a5" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Nov 14 17:57:53 2012 -0800" }, "committer": { "name": "Shruthi Krishna", "email": "skrish@codeaurora.org", "time": "Thu Nov 15 16:17:21 2012 -0800" }, "message": "msm: pm8921-chg: configure alarm voltage for 8930\n\nThe battery alarm is used in charger to switch to 19.2Mhz clock when the\nbattery goes low before a certain threshold. This way we prevent lockups\nif a shutdown or UVLO were to happen.\n\nConfigure the low battery voltage for 8930 based hardware.\n\nChange-Id: I33252dffcbadcdbe92e8967388ef28bce55476f3\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n(cherry picked from commit c725804b7cb90a761f75d519c866d0b184e568fc)\n" }, { "commit": "2beb127164dfff68339fa60ddc4203859a7c31a5", "tree": "ef7049993b4a1c3295c5305c8f0731690f660d39", "parents": [ "e0557a92e1149a0892c9314739cf37b6bec2c08e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Sep 24 13:04:37 2012 -0700" }, "committer": { "name": "Shruthi Krishna", "email": "skrish@codeaurora.org", "time": "Thu Nov 15 16:17:07 2012 -0800" }, "message": "mfd: pm8038: Enable the battery alarm module\n\nThe battery alarm module provides interrupts when the battery\nfalls below or rises above a programmed threshold. This feature\nis useful to wakeup the device when the battery is in low voltage\nsituations.\n\n(cherry picked from commit 6d538144cb02933cf27f425ad721541d80377b43)\n\nChange-Id: I5d17bacf363cab165156b62730ccf9c23c633b3c\nCRs-Fixed: 372690\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n(cherry picked from commit 16f56979ee6876ce64f6dba8928a782825ff1275)\n" }, { "commit": "e0557a92e1149a0892c9314739cf37b6bec2c08e", "tree": "09702512ffa9745c0a7b3340215621d89f8381e2", "parents": [ "d786c55200ec5bb86f55b857438aa5a7d7c336d4" ], "author": { "name": "Kuogee Hsieh", "email": "khsieh@codeaurora.org", "time": "Wed Oct 31 13:29:48 2012 -0700" }, "committer": { "name": "Shruthi Krishna", "email": "skrish@codeaurora.org", "time": "Thu Nov 15 16:05:59 2012 -0800" }, "message": "msm_fb: display: force mdp clock off at suspend\n\nAt suspend, turn off mdp related clocks off if clocks\nare not turned off by vsync disable request.\n\nChange-Id: I0949b00b9ee0aee05b9b553ac7318b647052d94d\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n(cherry picked from commit 780557dc178fc5511f4c03b4840791d27499a5f6)\n" }, { "commit": "d786c55200ec5bb86f55b857438aa5a7d7c336d4", "tree": "bf1f3152fa9a8a899210d6ef03a36df53b0c216e", "parents": [ "61140e3385a476c45bc31094040e6417a83f7989" ], "author": { "name": "Kuogee Hsieh", "email": "khsieh@codeaurora.org", "time": "Sat Oct 13 17:27:55 2012 -0700" }, "committer": { "name": "Shruthi Krishna", "email": "skrish@codeaurora.org", "time": "Thu Nov 15 16:05:51 2012 -0800" }, "message": "msm_fb: display: fix dsi_busy_wait race condition\n\nAfter pipe_commit() released mutex and before kickoff happens,\nThere has possibility that dcs command may start transmitted.\nThis patch add dsi_mdp_busy flag to fix this race condition.\n\nChange-Id: I0d9a81cd0719085c91c03386117261ad3bb6b182\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n(cherry picked from commit c9427ced2ab4cf1094b61360a476305066044a54)\n" }, { "commit": "61140e3385a476c45bc31094040e6417a83f7989", "tree": "384de17fd70e4d0a2f5452939278af78bc1a5c0c", "parents": [ "e3142f99ee94737f8617b733051088df2559b523" ], "author": { "name": "Kuogee Hsieh", "email": "khsieh@codeaurora.org", "time": "Sat Oct 13 17:26:31 2012 -0700" }, "committer": { "name": "Shruthi Krishna", "email": "skrish@codeaurora.org", "time": "Thu Nov 15 16:05:44 2012 -0800" }, "message": "msm_fb: display: add video mode dcs cmdlist support\n\nAdd video mode dcs command list support. This patch\nmake sure dcs commands committed while dsi video engine\nis busy so that dcs command will be transmitted at beginning\nof next BLLP.\n\nChange-Id: I11b0214ee10f3b1ef33b1da4c8e577800068cb06\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n(cherry picked from commit 7b0e0a45216714d76bf717a928a0db77bfa2868a)\n" }, { "commit": "e3142f99ee94737f8617b733051088df2559b523", "tree": "c2d8156ff58ee863f44033b8636f1ba3485b03d3", "parents": [ "27c8a9efcf16c3e52e9f532f5059d4205a65c3ea" ], "author": { "name": "Kuogee Hsieh", "email": "khsieh@codeaurora.org", "time": "Sat Oct 13 17:23:10 2012 -0700" }, "committer": { "name": "Shruthi Krishna", "email": "skrish@codeaurora.org", "time": "Thu Nov 15 16:05:37 2012 -0800" }, "message": "msm_fb: display: add sysfs and clock control to smart panel\n\nBoth vsync enabled and disabled are controlled by framework\nthrough ioctl. Driver reports vsync event to framework via\nsysfs. Meanwhile, mdp related clocks are enabled by frame\nwork at vsync enabled request and disabled by driver if there\nis no any display update within specifid vsync period.\n\nChange-Id: Ice5be3a6db5930b95bdd2f718d9256bf73936e23\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n(cherry picked from commit 3c406e4eec79b710b7f5b5b67c23db7af871be40)\n" }, { "commit": "27c8a9efcf16c3e52e9f532f5059d4205a65c3ea", "tree": "9a2fa6251ffc80e2c99555e55b68c2f251fc8d5c", "parents": [ "ac682bb1dc939cae3b0255d853dbb1bc9d70ad8b" ], "author": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Wed Nov 14 12:35:30 2012 -0800" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Wed Nov 14 16:27:36 2012 -0800" }, "message": "Adding WLAN configs to defcofig file\n\nChange-Id: I44fd83f3d70456ab22acff151e112128655bbcd6\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "ac682bb1dc939cae3b0255d853dbb1bc9d70ad8b", "tree": "94fae0ffeb2e44d1edae7910499259752a576f8d", "parents": [ "aa75efacbe99d1e03170fb52505c686e6d076aca" ], "author": { "name": "Vikram Mulukutla", "email": "vmulukut@codeaurora.org", "time": "Thu Sep 20 14:06:23 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 03:05:16 2012 -0800" }, "message": "msm: msm_dsps: Disable the DSPS watchdog before shutdown\n\nThe DSPS watchdog timer continues counting even after\nthe DSPS is shutdown. This may cause a spurious watchdog\ninterrupt after the DSPS is powered up, before the software\nrunning on the processor can re-init the watchdog. Disable\nthe watchdog before shutting down the watchdog.\n\nChange-Id: I169e690b82ae05617e096ac832d757a110f673a4\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n(cherry picked from commit c84f66e2f518dcb9f0931a5a1b65bc770ee23d13)\n\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit c9b48441a43985671779dc247356cb1313573722)\n" }, { "commit": "aa75efacbe99d1e03170fb52505c686e6d076aca", "tree": "23fa27b756ee117832938eb892073f64fd938c8c", "parents": [ "6a8fb3b8caced1d6ac895b3f5985292a55e76301" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Tue Sep 18 13:42:40 2012 -0600" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 03:00:14 2012 -0800" }, "message": "msm: cpufreq: Remove cross-calling limitation\n\nRemove cross-calling limitations imposed by cpufreq. Clock drivers\nand SPM driver now allow changing of frequencies from any core. Using\ncpus_allowed mask to check for core affinity works well with workqueues\nbut do not port so well when the core requesting frequency change is a\nkthread with the flag PF_TASK_BOUND not set.\n\nChange-Id: Iab664ce8657780814440a11dff77cc925df597f8\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n(cherry picked from commit be01a17afb6b6e85456217caa1ac11eb0b6674e1)\n(cherry picked from commit bd97cdfeb87eda0373721baaea744b02a27822f5)\n" }, { "commit": "6a8fb3b8caced1d6ac895b3f5985292a55e76301", "tree": "327ae2e64446372eb0b5dbf63bf5842c0fd35a40", "parents": [ "a1ec6438acaef57f3655106735d12a3724a8c1c5" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Sun Sep 16 14:54:35 2012 -0600" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:56:17 2012 -0800" }, "message": "msm: spm: Add cross-calling support to change voltages\n\nSPM block is responsible for power collapsing the core, but also\ninteracts with the PMIC through hardware to change core voltage. It\nwould be beneficial to frequency algorithms to change frequencies and\nthereby voltages of all cores running from a single core. In some\ntargets, the SPM is configured to set voltage only for that core. Ensure\nthat the core voltage is set only from that core.\n\nChange-Id: I656e20a49d9784f08e9ce4d4e8f6c15760ba015b\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n(cherry picked from commit bcd483b93abd434d0207211c8bab7d0f7d653c27)\n(cherry picked from commit 740945d7d0d4bab1d3d7674e7061fbe0acfe0d19)\n" }, { "commit": "a1ec6438acaef57f3655106735d12a3724a8c1c5", "tree": "3d4dcc9ed61dd068d201d76af00fba6e7d8af769", "parents": [ "9e1417cca78551dd90d8fc8479157688f7beb56b" ], "author": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Tue Oct 09 14:46:56 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:50:36 2012 -0800" }, "message": "msm: mpdecision: do not print warning on hotplug times\n\nHotplug times are tracked elsewhere, and excessive logging\n(especially in SCHED_FIFO context) can cause problems for\nsystem responsiveness.\n\nChange-Id: I82ba0cdff71e04af8c7ab4ef2a1cfe9306075ee3\nSigned-off-by: Steve Muckle \u003csmuckle@codeaurora.org\u003e\n(cherry picked from commit c430681cc22d5d0d7229dc69ea8f5302b4c57059)\n(cherry picked from commit 2db00aa4e7f1feb5c40330a4df22afe16b4dca8e)\n" }, { "commit": "9e1417cca78551dd90d8fc8479157688f7beb56b", "tree": "2e89838778e27b3325f2d4f113cc840d16638065", "parents": [ "988e7ba749e9f586b7e88a5db10a4d143a899f81" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Sep 26 09:42:32 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:45:38 2012 -0800" }, "message": "thermal: tsens8960: Add platform detection\n\nTSENS is not supported on the MSM8960 1.0 because of a\nHW bug. The driver used a platform detection mechanism\nthrough a flag. With the 8960PRO the CPU MAJOR\nversion resets back to major version 1. The driver\ndoes not distinguish the PRO parts differently and\ndisables the driver. Change the method to detect\nthe CPU using the platform detection api instead\nof relying on the platform data.\n\nChange-Id: I446eb196cf81e6a29760530dfbce6910652e867c\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n(cherry picked from commit 30447fec965309e30f1eb33c0d318ee4a5365026)\n(cherry picked from commit 25bb62fbbc050147ae298179d7abe4ad08f78371)\n" }, { "commit": "988e7ba749e9f586b7e88a5db10a4d143a899f81", "tree": "d999c970f71e9dafc7bc37f4231414ea6e44ddc9", "parents": [ "7d67c4e3d46a05044d3e8983ecbc330d47a285c9" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Wed Oct 03 15:53:54 2012 -0600" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:41:58 2012 -0800" }, "message": "msm: bam_dmux: handle system wide low memory conditions\n\nWhen A2 turns on, queue_rx() is first run from the SMSM thread, and\nattempts to allocate 32 2kB-buffers with GFP_KERNEL for DMA transactions.\nIf the system is low on memory, the allocation could put the thread to\nsleep while the memory allocator scavenges for enough memory to satisfy\nthe request. This is not desired as it stalls a critical system thread\nthat is communicating with a real-time system.\n\nInstead, use GFP_NOWAIT which will return immediately if no memory is\navailable for the allocation request so that bam_dmux may handle the\nsituation gracefully and possibly reschedule the allocations for a later\ntime.\n\nCRs-Fixed: 406946\nChange-Id: I645acd29f7e0fa27883a27c043fc951cbdd91b84\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n(cherry picked from commit ad75d8d57e70aab72d1c0c1411f58d1d3028da40)\n(cherry picked from commit bcbb7dda88b66d69c2ebb6c31b5a6083f4df6518)\n" }, { "commit": "7d67c4e3d46a05044d3e8983ecbc330d47a285c9", "tree": "382b3b4ebc8a4c9bd8abc6733accfddb14ec6050", "parents": [ "ee22adadb359ae0526eccbd640e0832acc025226" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Thu Oct 04 13:37:57 2012 -0600" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:37:24 2012 -0800" }, "message": "msm: smsm: Rename LTE Coexistence Bit\n\nThe LTE Coexistence bit has been renamed to just SMSM_PROC_AWAKE since\nit is now being used for more general is-processor-awake signaling.\n\nChange-Id: I9007c6c91ce3338c790864bf09318edbcb6d50c0\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n(cherry picked from commit 8cb30f55fe05f9e59824941bb9ffe8f904b5f3ce)\n(cherry picked from commit 18f84bf8c7c86bd5305aad31eee27e8294434c92)\n" }, { "commit": "ee22adadb359ae0526eccbd640e0832acc025226", "tree": "3b167c8275c6f6979d38b158afc7c7bd30595852", "parents": [ "4c64d2d0be3c839cd94f53209b6e48c50ab44c8d" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Fri Jul 20 17:57:49 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:29:00 2012 -0800" }, "message": "defconfig: Enable qos queue discipline configuration\n\nEnable scheduling along with PRIO and HTB qdisc for QoS support.\n\nChange-Id: I415ce37758dbca454e530bb6aadf80f410c161cd\nAcked-by: Sharat Masetty \u003csmasetty@qualcomm.com\u003e\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n(cherry picked from commit d00b7311846b63e45405e53b40da1a95ccd5e35c)\n(cherry picked from commit e6f10284211fa32f3379d70521aa4b16320a4d83)\n" }, { "commit": "4c64d2d0be3c839cd94f53209b6e48c50ab44c8d", "tree": "3a1e8d4ac767890452490a2060aa873b539ba63e", "parents": [ "4e28773483fa22115f8a0e84729f1260e28fe30c" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Mon Aug 06 17:23:26 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:25:01 2012 -0800" }, "message": "net: sched: export an api to enable/disable flow on sch\n\nExport a function from sch_api.c that will look up\ndesired qdisc and call it\u0027s registered change function\nto enable/disable flow.\n\nChange-Id: I5b6dc7a6fd2b09b796c92b3770ba83423d19c864\nCRs-Fixed: 355156\nAcked-by: Jimi Shah \u003cjimis@qualcomm.com\u003e\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n(cherry picked from commit b8419fe690053b76658d49565c57ac654faf2eaa)\n(cherry picked from commit 3a30e7aa4487f56a74f12c12f11cece6ce1f2100)\n" }, { "commit": "4e28773483fa22115f8a0e84729f1260e28fe30c", "tree": "20a4f243afbb17dded7fde991f8a29bdc846b695", "parents": [ "b6510efc2656f24da8d80377e548948a20d9eb92" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Mon Aug 06 17:24:25 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:20:44 2012 -0800" }, "message": "msm_rmnet: add ioctl to enable/disable flow on prio qdisc\n\nThis ioctl provides a shorter route to enable/disable flow\non a given qdisc when compared to the traditional NETLINK\nbased communication. It is known to improve throughput when\ndata flow is throttled at a higher rate.\n\nChange-Id: I8533887c8a7caffe3b17320dc044f28388ba8b83\nCRs-Fixed: 355156\nAcked-by: Jimi Shah \u003cjimis@qualcomm.com\u003e\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n(cherry picked from commit 747a936d6fd1d49331b0891df6797144eec56e23)\n(cherry picked from commit cfa440e0faf9b6cd8bc313c750fd0713490f3d94)\n" }, { "commit": "b6510efc2656f24da8d80377e548948a20d9eb92", "tree": "421782cecd82bcf2bb2d52f87279f9bb9001c647", "parents": [ "63da6bd533f546870296563cad246f3041a55206" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Jul 09 09:48:54 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:17:01 2012 -0800" }, "message": "msm: Export some iommu domain management functions\n\nSeveral of the iommu virtual address space functions may\nneed to be accessed by modules. Export the symbol.\n\nChange-Id: Ief99cbb63f729943b6d8b45ce9aed071d84decd1\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n(cherry picked from commit 33b30bee472264ecf5b7d06d842349bbe593d0fc)\n\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit 67c19b8a6c2a8a4e27df324516ecddbf758c379c)\n" }, { "commit": "63da6bd533f546870296563cad246f3041a55206", "tree": "9b281c79e3b902b7f2ce32373bc9550e80261166", "parents": [ "622828f92f4d96fe4f8e5437f07a9b99f6519a40" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Sat Aug 18 11:21:00 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:10:26 2012 -0800" }, "message": "checkpatch: Excuse reverts from \"summary line over 75 characters\" check\n\nRather than forcing authors of reverts to truncate the summary line\nbecause the \"Revert\" prefix added pushes it over the character limit,\nexcuse reverts from this rule.\n\nChange-Id: I395dfff3327e360ef935d4a685c38df6577e3867\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n(cherry picked from commit 3c09aeb415d542b08257021992aadd965fcb3902)\n\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit 952824addcec8487b8c800b0ef18ede547711381)\n" }, { "commit": "622828f92f4d96fe4f8e5437f07a9b99f6519a40", "tree": "95b218c787a8f57cf36bd768fc749045e0380096", "parents": [ "79900828465665a2f7c0a307aa048ed84fd0982b" ], "author": { "name": "Kaushal Kumar", "email": "kaushalk@codeaurora.org", "time": "Tue Jul 31 16:07:49 2012 +0530" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:05:23 2012 -0800" }, "message": "msm: cpr: Enable CPR support for 8625\n\nCPR (Core Power Reduction) helps save CPU power by\nreducing the chip voltage whenever possible\n\nChange-Id: Ifa32967046b4bb7f5b4f756feb9cefabe8f5bea4\nSigned-off-by: Kaushal Kumar \u003ckaushalk@codeaurora.org\u003e\n(cherry picked from commit c0e5d6768038efbe5fb98fcd935f01c8ce611e08)\n\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit 7c8192db2ee5a7edbf8ac9707e3d044efd213da3)\n" }, { "commit": "79900828465665a2f7c0a307aa048ed84fd0982b", "tree": "dbf83050b65b1b166edb44d3a8e88e8f46613009", "parents": [ "bd01d26ba09700a6d7359151c361f7fdd6e0b9fb" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Aug 07 12:34:22 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 02:00:36 2012 -0800" }, "message": "msm: cpuidle: Don\u0027t disable irqs again\n\ncpu_idle() disables irqs before calling down into the cpuidle\ndriver via cpuidle_idle_call(). Disabling irqs again in\nmsm_cpuidle_enter() is wasteful and unnecessary. It also inhibits\nour ability to determine the largest irq latency when the cpu\nidles for extended periods of time because the irqsoff trace is\nreenabled when the irqs are disabled in msm_cpuidle_enter().\n\nNote that we still reenable irqs before returning, as is required\nby the ARM idle loop.\n\nChange-Id: I925478d8fef88ab490959622bc68303f59cc6e79\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n(cherry picked from commit 27361508474098444013f96acb95f0e3f1ed55c4)\n\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit 1c3d38b5c85412f89e2973896cfc5d1e793e1828)\n" }, { "commit": "bd01d26ba09700a6d7359151c361f7fdd6e0b9fb", "tree": "d66fb60034e02c4173106dff2baa28f0b7eb0e19", "parents": [ "d5bb05574ebbadfdea6c65e71cd3cb9afdbe1c6e" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue May 29 16:57:52 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 01:56:20 2012 -0800" }, "message": "spmi: qpnp-int: Support wake interrupts\n\nThe irq framework already supports wakeup interrupts. We just\nneed to provide a dummy irq_set_wake so the framework does not\nreturn an error. Also specify the MASK_ON_SUSPEND flag so that\nnon-wake interrupts are masked on suspend.\n\nChange-Id: I7fa5717d79467e22647606c3ee93373a2bffc547\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n(cherry picked from commit c86e2b7849eaf8d498cb2dabb59a33dab7e6dca5)\n\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit ed6e1f1345445c399f89245a2b576b1b16395890)\n" }, { "commit": "d5bb05574ebbadfdea6c65e71cd3cb9afdbe1c6e", "tree": "bf8453448284ca612d7b5e4a643ea7bb43670112", "parents": [ "1e565d54f51ee8fc9d81704fb7a3028108f5e13c" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Sat Aug 11 15:02:12 2012 -0600" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 01:51:41 2012 -0800" }, "message": "slim: msm: Control interface clock if it\u0027s specified\n\nSome platforms (e.g. 8974) have interface clock that is not ON by\ndefault. Turn it ON during probe, and control it like core clock\nif it needs to be controlled.\n\nChange-Id: Ifffb4b7ea9afb5f3f1208b4b2b6638594ffca541\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n(cherry picked from commit debc8b75c650751d6e2cd4e5565faed384758446)\n\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit 89d628644c5241a5ec37b6d7cceda3ae0ec978e5)\n" }, { "commit": "1e565d54f51ee8fc9d81704fb7a3028108f5e13c", "tree": "fd28c4206825ccbe2de331194cacd9023dae68c0", "parents": [ "63b8726d1790ef9c9f3952f9630ad260711c6207" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Mon Aug 20 22:23:02 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 01:47:30 2012 -0800" }, "message": "msm: clock-local2: Move lock from rcg_clk_set_rate to lower level ops\n\nThe local_clock_reg_lock is used to protect registers accesses. Move\nthe acquiring and releasing of this lock from rcg_clk_set_rate to\nset_rate_mnd and set_rate_hid to allow overriding of the RCG set rate\nop with ops that dont require the lock.\n\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n(cherry picked from commit 8c26055e822312da17d93e2a252bf522e08c3965)\n\nConflicts:\n\n\tarch/arm/mach-msm/clock-local2.c\n\nChange-Id: Ibb67a921f6b1c53573b864ce1bd05b13492b92f5\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit 33ce43fe3edf79bbc8ab6948d96c463696237d3d)\n" }, { "commit": "63b8726d1790ef9c9f3952f9630ad260711c6207", "tree": "5ec6b29efb496a047ff4263c908c45fbc101ff77", "parents": [ "d0befdef024eb2b3393446942ca1389f700f2d57" ], "author": { "name": "Girish Mahadevan", "email": "girishm@codeaurora.org", "time": "Wed Aug 15 09:21:23 2012 -0600" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 01:43:47 2012 -0800" }, "message": "msm: pm: Support for Krait Retention\n\nIntroduce a new low power state for Krait, retention.\nThis state will lower the voltage to the Krait core to\nretention voltage in addition to clock gating. This state\nwill be in between WFI and Standalone power collapse in\nterms of time overhead and power savings.\n\nChange-Id: I6b1f0a0d2e4954a705a047fd4a07f4dd1fb3518a\nSigned-off-by: Girish Mahadevan \u003cgirishm@codeaurora.org\u003e\n(cherry picked from commit d27ca4a7526a890f9d2979acefda3561e49d2e66)\n\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit 3af7249c36ab53923fdf216df3b3ba2c7f847851)\n" }, { "commit": "d0befdef024eb2b3393446942ca1389f700f2d57", "tree": "a52b3a8d0f7ffc9d3deefd7f47e43f92eaba63a7", "parents": [ "1e0e2789f76c5af8de02c9ad9375e7aeece7cefe" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Thu Aug 09 15:32:49 2012 -0600" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 01:36:04 2012 -0800" }, "message": "msm: bam_dmux: add handling for unsupported clocks\n\nIf any of the clocks bam_dmux normally uses is unsupported on a target,\nbam_dmux should ignore that clock and proceed.\n\nChange-Id: I6124059b23a3f6a4a6f3c3a7eeaaa1f9436de1b4\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n(cherry picked from commit 0c9371ab794830add3a0149c4f499a603507b435)\n\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit e1f715f90c5dd5976270d654807946716129bff9)\n" }, { "commit": "1e0e2789f76c5af8de02c9ad9375e7aeece7cefe", "tree": "2224493e2be1e6f5e7d91dd898dde71ff69f13db", "parents": [ "f9174f7ba336e90855768dba6a0f3caf535129e2" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Mon Jun 18 22:49:10 2012 +0530" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 12 01:29:22 2012 -0800" }, "message": "input: atmel_mxt_ts: Add device tree support\n\nParse the device tree elements and fill platform\ndata structure.\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n(cherry picked from commit d96f5032cd8b73450886262fe193d1531038c0f0)\n\nConflicts:\n\n\tdrivers/input/touchscreen/atmel_mxt_ts.c\n\nChange-Id: I551dadffaa84c991abbe964bfb9f72b7fd11dfee\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n(cherry picked from commit 368b8d73bbda62f6ab217ef06019b685636fc3ba)\n" } ], "next": "f9174f7ba336e90855768dba6a0f3caf535129e2" }