)]}' { "log": [ { "commit": "454d48ff70c24930c6b0f9cb64f290fca2dfb271", "tree": "c4972b1350ee2b4a603b043f013a26bbee9d0527", "parents": [ "d26a23454813908a1bf0e2fd8c73233b22c6dbd7" ], "author": { "name": "Vinicius Costa Gomes", "email": "vinicius.gomes@openbossa.org", "time": "Fri Aug 19 21:06:52 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:11 2011 -0300" }, "message": "Bluetooth: Use the same timeouts for both ACL and LE links\n\nSigned-off-by: Vinicius Costa Gomes \u003cvinicius.gomes@openbossa.org\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "d26a23454813908a1bf0e2fd8c73233b22c6dbd7", "tree": "20a47fdba8e49371265684bc2ed2306d7c042195", "parents": [ "e2dcd113d15ef99d23498859e7006955b5367698" ], "author": { "name": "Vinicius Costa Gomes", "email": "vinicius.gomes@openbossa.org", "time": "Fri Aug 19 21:06:51 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:11 2011 -0300" }, "message": "Bluetooth: Add a flag to indicate that SMP is going on\n\nAdd HCI_CONN_LE_SMP_PEND flag to indicate that SMP is pending\nfor that connection. This allows to have information that an SMP\nprocedure is going on for that connection.\n\nWe use the HCI_CONN_ENCRYPT_PEND to indicate that encryption\n(HCI_LE_Start_Encryption) is pending for that connection.\n\nWhile a SMP procedure is going on we hold an reference to the\nconnection, to avoid disconnections.\n\nSigned-off-by: Vinicius Costa Gomes \u003cvinicius.gomes@openbossa.org\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "e2dcd113d15ef99d23498859e7006955b5367698", "tree": "c5349d3b23e09b413bbfd21d0964408aa374f18b", "parents": [ "52087a792c1513b85de674a4fc67fb92855474c3" ], "author": { "name": "Vinicius Costa Gomes", "email": "vinicius.gomes@openbossa.org", "time": "Fri Aug 19 21:06:50 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:10 2011 -0300" }, "message": "Bluetooth: Reset the security timer when a command is queued\n\nEach time a SMP command is enqueued, we reset the SMP timer,\nthis way we follow exactly what the spec mandates:\n\n\"The Security Manager Timer shall be reset when an L2CAP SMP command is\nqueued for transmission.\" Vol. 3, Part H, Section 3.4\n\nSigned-off-by: Vinicius Costa Gomes \u003cvinicius.gomes@openbossa.org\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "52087a792c1513b85de674a4fc67fb92855474c3", "tree": "4b7bf7510a44378a5cecfcb66d22364624c2dd56", "parents": [ "da3ba88a9996cd64c6768bed5727e02da81e2c8d" ], "author": { "name": "Luiz Augusto von Dentz", "email": "luiz.von.dentz@intel.com", "time": "Wed Aug 17 16:23:00 2011 +0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Wed Sep 21 12:58:10 2011 -0300" }, "message": "Bluetooth: make use of connection number to optimize the scheduler\n\nThis checks if there is any existing connection according to its type\nbefore start iterating in the list and immediately stop iterating when\nreaching the number of connections.\n\nSigned-off-by: Luiz Augusto von Dentz \u003cluiz.von.dentz@intel.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "da3ba88a9996cd64c6768bed5727e02da81e2c8d", "tree": "ad6b874767b6aa89c6c1e12df63d24026c6fa296", "parents": [ "87b6d09225506236c58bf407f9b750591a3b3a7b" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Mon Sep 19 14:34:10 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:50 2011 -0400" }, "message": "rtlwifi: Combine instances of RTL_HAL_IS_CCK_RATE macros.\n\nThree drivers, rtl8192ce, rtl8192cu and rtl8192de, use the same macro\nto check if a particular rate is in the CCK set. This common code is\nrelocated to a common header file. A distinct macro used by rtl8192se\nwith the same name is renamed.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "87b6d09225506236c58bf407f9b750591a3b3a7b", "tree": "9bd57b50ff8d6884937671e9545fcfef1eba6e22", "parents": [ "7664beeb2fb2d7ed13b2609dab8b84724263f135" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Mon Sep 19 14:34:09 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:50 2011 -0400" }, "message": "rtlwifi: rtl8192de: Change modinfo messages\n\nThe various modparam messages are difficult to understand.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7664beeb2fb2d7ed13b2609dab8b84724263f135", "tree": "01ecf0b6057852281913a0d5d768fa252937b603", "parents": [ "eed72316586a3ad401eff054b7c7a3ea56869541" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Mon Sep 19 14:34:08 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:50 2011 -0400" }, "message": "rtlwifi: rtl8192se: Change modinfo messages\n\nThe various modparam messages are difficult to understand.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eed72316586a3ad401eff054b7c7a3ea56869541", "tree": "7ca6dcc70ac5e1e7407502abfcee129ceb1d5bfa", "parents": [ "f36369afce40a20b6328590c1f9a777d0810f815" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Mon Sep 19 14:34:07 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:49 2011 -0400" }, "message": "rtlwifi: rtl8192ce: Change modinfo messages\n\nThe various modparam messages are difficult to understand.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f36369afce40a20b6328590c1f9a777d0810f815", "tree": "a18988307bd51ed654575a947a36b8befa9d8569", "parents": [ "93aead46428d38729f430f395a8403795a019e54" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Mon Sep 19 20:15:48 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:49 2011 -0400" }, "message": "ath9k: Store noise immunity values across scanning\n\nCCK/OFDM noise immunilty values are always reset to defaults\nduring bgscan. This could affect the link quality and\nperformance when the STA is associated in a noisy channel.\nSo do not override the learned values across the scanning.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "93aead46428d38729f430f395a8403795a019e54", "tree": "ab7619ce7100da0bdc0ac1596fcdfd365ac5a2b5", "parents": [ "6a2968aaf50c7a22fced77a5e24aa636281efca8" ], "author": { "name": "Ilan Elias", "email": "ilane@ti.com", "time": "Sun Sep 18 11:19:36 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:49 2011 -0400" }, "message": "NFC: driver for TI shared transport\n\nSigned-off-by: Ilan Elias \u003cilane@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6a2968aaf50c7a22fced77a5e24aa636281efca8", "tree": "c3c9691da86f90d1eb13ee75e36189faad553496", "parents": [ "55eb94f9e923cba376cdf48ea5ab28d81116bead" ], "author": { "name": "Ilan Elias", "email": "ilane@ti.com", "time": "Sun Sep 18 11:19:35 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:49 2011 -0400" }, "message": "NFC: basic NCI protocol implementation\n\nThe NFC Controller Interface (NCI) is a standard\ncommunication protocol between an NFC Controller (NFCC)\nand a Device Host (DH), defined by the NFC Forum.\n\nSigned-off-by: Ilan Elias \u003cilane@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "55eb94f9e923cba376cdf48ea5ab28d81116bead", "tree": "9b70d091a80087bcc02d261b50e335c8b1cca163", "parents": [ "8b3fe7b591b3c50061a8701f8eda14033420577b" ], "author": { "name": "Ilan Elias", "email": "ilane@ti.com", "time": "Sun Sep 18 11:19:34 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:49 2011 -0400" }, "message": "NFC: move nfc.h from include/net to include/net/nfc\n\nThe file nfc.h was moved from include/net to include/net/nfc,\nsince new NFC header files will be added to include/net/nfc.\n\nSigned-off-by: Ilan Elias \u003cilane@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8b3fe7b591b3c50061a8701f8eda14033420577b", "tree": "1bdd98d750c12c6bdf6999d3f704a1f50e9db477", "parents": [ "a7ce1c9446a7f7513211e4698d07357d20452909" ], "author": { "name": "Ilan Elias", "email": "ilane@ti.com", "time": "Sun Sep 18 11:19:33 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:49 2011 -0400" }, "message": "NFC: Add dev_up and dev_down control operations\n\nAdd 2 new nfc control operations:\ndev_up to turn on the nfc device\ndev_down to turn off the nfc device\n\nSigned-off-by: Ilan Elias \u003cilane@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a7ce1c9446a7f7513211e4698d07357d20452909", "tree": "472fa017060388d6337d2e498cb492cd732a2c7b", "parents": [ "e30815016bbd0b5c3dcdc29f53e054b57938f1aa" ], "author": { "name": "Alexander Simon", "email": "an.alexsimon@googlemail.com", "time": "Sun Sep 18 00:16:45 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:48 2011 -0400" }, "message": "mac80211: fix indentation\n\nSigned-off-by: Alexander Simon \u003can.alexsimon@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e30815016bbd0b5c3dcdc29f53e054b57938f1aa", "tree": "2a7127363a6085b2fb3fbdf9045cce2ac2ee40d0", "parents": [ "4d8b61490c14a36efdee4a8bf523e26809df05ac" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Thu Sep 15 17:40:50 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:43:48 2011 -0400" }, "message": "wireless: Do not allow disabled channel in scan request\n\ncfg80211_conn_scan allows disabled channels at scan request.\nHence probe request was seen at the disabled one. This patch\nensures that disabled channel never be added into the scan\nrequest\u0027s channel list.\n\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4d8b61490c14a36efdee4a8bf523e26809df05ac", "tree": "e8a37cac291bb64fa3d85ac27df45f56d493f2cb", "parents": [ "c9df56b48e4ff003eaebd680ec7a45342dcd03ea", "8c23516fbb209ccf8f8c36268311c721faff29ee" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:11:55 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 20 14:11:55 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.infradead.org/users/linville/wireless\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-pci.c\n\tdrivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c\n\tdrivers/net/wireless/rt2x00/rt2800usb.c\n\tdrivers/net/wireless/wl12xx/main.c\n" }, { "commit": "c9df56b48e4ff003eaebd680ec7a45342dcd03ea", "tree": "b943ce5010290a4979a1488d791a5e6663db02a4", "parents": [ "2981808269941490f209b2db88ae021d7007b39d" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Fri Sep 16 18:56:23 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:14 2011 -0400" }, "message": "cfg80211/nl80211: Add PMKSA caching candidate event\n\nWhen the driver (or most likely firmware) decides which AP to use\nfor roaming based on internal scan result processing, user space\nneeds to be notified of PMKSA caching candidates to allow RSN\npre-authentication to be used.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2981808269941490f209b2db88ae021d7007b39d", "tree": "7f2e87722d198fd79a7ec49814afebf71e49a132", "parents": [ "6be19ccd698abf9c4f0b7bba5a704f94e7ccdf54" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Sep 16 16:36:32 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:14 2011 -0400" }, "message": "b43: LCN-PHY: finish sense setup\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6be19ccd698abf9c4f0b7bba5a704f94e7ccdf54", "tree": "6224bc5560bc0b4595c27491ea0574b5ec7d5ed9", "parents": [ "39193498913f82dd7e484aa908843ca4114c3b0c" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mohammed@qca.qualcomm.com", "time": "Fri Sep 16 19:03:40 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:14 2011 -0400" }, "message": "rfkill: properly assign a boolean type\n\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmohammed@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "39193498913f82dd7e484aa908843ca4114c3b0c", "tree": "14951970eaaa7c66a1e6b2f820b5f7cae8d2280a", "parents": [ "bbb5574224168ef62c8549535c0d0a99e989ecf3" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Sep 16 13:45:25 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:13 2011 -0400" }, "message": "cfg80211: validate IBSS BSSID\n\nThe IBSS BSSID is never validated, so an\ninvalid one might end up being used. Fix\nthis by rejecting invalid configuration.\n\nReported-by: Marek Lindner \u003clindner_marek@yahoo.de\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bbb5574224168ef62c8549535c0d0a99e989ecf3", "tree": "adee62f8eacdffa048e6df4207c75132a13a9650", "parents": [ "1b0a69c1ff445c265b173cc82c3f41a01dd90bec" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Sep 16 12:34:03 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:13 2011 -0400" }, "message": "b43: LCN-PHY: add more init tweaks\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1b0a69c1ff445c265b173cc82c3f41a01dd90bec", "tree": "4cd524ec9a44caf2c5e47c15e2be850a8c04a2bd", "parents": [ "ac78a52f49e3645c49e2c13a239b570d2e590bee" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Sep 16 12:34:02 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:13 2011 -0400" }, "message": "b43: LCN-PHY: init TX power control\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ac78a52f49e3645c49e2c13a239b570d2e590bee", "tree": "1e74da265dc1ee601110d36e478e6dd0f5195ef4", "parents": [ "0c5644b98b54dd4d156aba098689adb2054205cd" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Sep 16 12:34:01 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:12 2011 -0400" }, "message": "b43: LCN-PHY: implement SPUR avoidance mode\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0c5644b98b54dd4d156aba098689adb2054205cd", "tree": "a878455b8b9d2e534eee7a52937d1d317db79e0d", "parents": [ "b534706a0692912e72d4be78f45be57c5b231ed5" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Sep 16 12:34:00 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:12 2011 -0400" }, "message": "b43: LCN-PHY: set TX filters\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b534706a0692912e72d4be78f45be57c5b231ed5", "tree": "ae21e6e65cfb6aa0e22859fb4161c6d447edb25f", "parents": [ "3861b2c5d90b219ee772b5a1d1a32ee630564121" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Sep 16 12:33:59 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:11 2011 -0400" }, "message": "b43: LCN-PHY: tweaks for channel switching\n\nThey have been taken from brcmsmac, add Broadcom\u0027s copyright.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3861b2c5d90b219ee772b5a1d1a32ee630564121", "tree": "695674bb297eadac2a8b4afa4c463b61b3e05800", "parents": [ "7cc44ed48d0ec0937c1f098642540b6c9ca38de5" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Sep 16 12:33:58 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:11 2011 -0400" }, "message": "bcma: cc: export more control functions\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7cc44ed48d0ec0937c1f098642540b6c9ca38de5", "tree": "9c3822fd74a78a110bc390b4fe1101d12f5fd22a", "parents": [ "143bb15de5ea904195d8e52cca7e2edbf5b31159" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Fri Sep 16 15:32:34 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:11 2011 -0400" }, "message": "mac80211: Fix regression on queue stop during 2040 bss change\n\nThe commit \"mac80211: stop tx before doing hw config and\nrate update\" stops the tx queue and call drv_flush so frequently\nwhenever a beacon got received with 11n htcap. This leads to\nmassive \"Failed to stop TX DMA\" logspam on embedded hw. So the\nqueue stop and flush should be called if and only if there is a\nchange in the channel type.\n\nReported-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "143bb15de5ea904195d8e52cca7e2edbf5b31159", "tree": "a74f756cd63bba0f3e32c01518d8c8b619dcfde0", "parents": [ "000850065c3b8ee6c9e8125496be3ee9773903cc" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Thu Sep 15 11:46:54 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:11 2011 -0400" }, "message": "iwlagn: signedness bug\n\nre-apply the unsigned shorts bug fixed by Dan Carpenter but get lost\nafter the file move.\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "000850065c3b8ee6c9e8125496be3ee9773903cc", "tree": "5e8c4cad17546192a720359e38858bc4a8db4881", "parents": [ "effd4d9aece9184f526e6556786a94d335e38b71" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Thu Sep 15 11:46:53 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:10 2011 -0400" }, "message": "iwlagn: fix stack corruption for temperature offset v2\n\nSame stack corruption problem as temperature offset\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "effd4d9aece9184f526e6556786a94d335e38b71", "tree": "193f5f428dca02fc307043648e62ef0d62e59ca0", "parents": [ "7d8f2d50b5082385ad0e0ab5f7dc2a6f1c19819c" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 15 11:46:52 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:10 2011 -0400" }, "message": "iwlagn: do not use interruptible waits\n\nSince the dawn of its time, iwlwifi has used\ninterruptible waits to wait for synchronous\ncommands and firmware loading.\n\nThis leads to \"interesting\" bugs, because it\ncan\u0027t actually handle the interruptions; for\nexample when a command sending is interrupted\nit will assume the command completed fully,\nand then leave it pending, which leads to all\nkinds of trouble when the command finishes\nlater.\n\nSince there\u0027s no easy way to gracefully deal\nwith interruptions, fix the driver to not use\ninterruptible waits.\n\nThis at least fixes the error\niwlagn 0000:02:00.0: Error: Response NULL in \u0027REPLY_SCAN_ABORT_CMD\u0027\n\nI have seen in P2P testing, but it is likely\nthat there are other errors caused by this.\n\nCc: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nCc: stable@kernel.org [2.6.24+]\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7d8f2d50b5082385ad0e0ab5f7dc2a6f1c19819c", "tree": "99f1d49815710ff0174c8eee06253e6bfa328bad", "parents": [ "c6f30347a79502cc81e8ec55248b569b3a90ba2a" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Thu Sep 15 11:46:51 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:10 2011 -0400" }, "message": "iwlagn: use iwl_eeprom_calib_hdr structure\n\nFor retrieve calibration hdr related information, instead of using structure in\none place and #define in other place, unify the method to use data structure.\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c6f30347a79502cc81e8ec55248b569b3a90ba2a", "tree": "061f0a8ac7889d3e5ab814eae3cf75f80e2f1800", "parents": [ "18d0077f0c4a3b88a04bf164db39671edafc30b8" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Thu Sep 15 11:46:50 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:10 2011 -0400" }, "message": "iwlagn: add support for v2 of temperature offset calibration\n\nFor 2000 series of NICs, version 2 of temperature offset calibration\nshould be used.\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "18d0077f0c4a3b88a04bf164db39671edafc30b8", "tree": "7f7b20b97d6f88a5326d73267670b17f798dcdf5", "parents": [ "ca934b6715c134573da5acea01e9258eb0bf7c27" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 15 11:46:49 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:10 2011 -0400" }, "message": "iwlagn: remove drvdata support from bus layer\n\nSince the removal of the sysfs files, it is no\nlonger necessary to have upper layers control\nthe drvdata, so let the PCI driver have it for\nitself completely.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ca934b6715c134573da5acea01e9258eb0bf7c27", "tree": "1a86330109a0b9a110ab55834302afb4b45b6fa7", "parents": [ "fd90b3c1bab995f9225d8048d6d60e39dedac7ed" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 15 11:46:48 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:09 2011 -0400" }, "message": "iwlagn: move sysfs files to debugfs\n\nThe debug_level and temperature files should be in\ndebugfs, the txpower file is completely unneeded\nsince TX power can be set with iw/iwconfig.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fd90b3c1bab995f9225d8048d6d60e39dedac7ed", "tree": "f2726af163b2479a283b0a28857f193f3f51cffc", "parents": [ "cebcbd752a2e8b3a4da1d554cc570fc5310af057" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 15 11:46:47 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:09 2011 -0400" }, "message": "iwlagn: remove unused function declarations\n\niwl_suspend and iwl_resume don\u0027t exist.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cebcbd752a2e8b3a4da1d554cc570fc5310af057", "tree": "082dc5f3c8785ad9b1d4e931d06d77adf62f5427", "parents": [ "c01a404756ef7dd4089b3d5d2010cba99732e385" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 15 11:46:46 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:09 2011 -0400" }, "message": "iwlagn: rename iwl-pci.h to iwl-cfg.h\n\nThere\u0027s nothing PCI(E) specific in this file.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c01a404756ef7dd4089b3d5d2010cba99732e385", "tree": "a971c8eb1a2391141fab46469463bfbc63b5e54c", "parents": [ "72afb108ad679f0694d3232ffdd34b0e906773ef" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 15 11:46:45 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:09 2011 -0400" }, "message": "iwlagn: clean up PM code\n\nThe transport callbacks might as well be undefined\nwhen CONFIG_PM_SLEEP is not set, so ifdef all of\nit out and make everything available for PM_SLEEP\nonly.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "72afb108ad679f0694d3232ffdd34b0e906773ef", "tree": "3b48aa0bd799fad51f8818833f0f4508f411ea28", "parents": [ "370ad313be78473bfdb066397e38abf1b0dd5b5c" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 15 11:46:44 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:08:08 2011 -0400" }, "message": "iwlagn: Makefile whitespace cleanup\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "370ad313be78473bfdb066397e38abf1b0dd5b5c", "tree": "d9ede6a87ed746235e9a8aacddcc80bb36f5845f", "parents": [ "c17d0681b8a4d93217464d8026361c7b44b3ca99" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 15 11:46:43 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:08:07 2011 -0400" }, "message": "iwlagn: generically provide iwl_trans_send_cmd_pdu\n\nThere\u0027s no need to have the transport layer have a\ncallback for iwl_trans_send_cmd_pdu() since it is\njust a generic wrapper around iwl_trans_send_cmd().\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c17d0681b8a4d93217464d8026361c7b44b3ca99", "tree": "40b4be104c3b017e87215d50859d25e3b76a43e5", "parents": [ "701cb0997f42196a42c3566da1d35451b4b899e2" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 15 11:46:42 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:08:07 2011 -0400" }, "message": "iwlagn: move PCI-E transport files\n\nMove all the PCI-E specific transport files to\nbe iwl-trans-pcie*; specifically iwl-trans.c\nwhich is really iwl-trans-pcie.c.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "701cb0997f42196a42c3566da1d35451b4b899e2", "tree": "4b98df3216c6a026f2bc6876df880d1b917f95ec", "parents": [ "1dd9124e2911b34744672c91ad865f39711f5542" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Thu Sep 15 11:46:41 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:30 2011 -0400" }, "message": "iwlagn: merge eeprom access into single file\n\nAfter driver split and no need to support legacy devices, there is no reason\nwe need to separate the NVM access into different files, merge those.\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1dd9124e2911b34744672c91ad865f39711f5542", "tree": "97d7077a470232b128051f3763d71a16df3f622d", "parents": [ "403ba56aedf2b3092e12219188e5c248f04c5acc" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Sep 15 11:46:40 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:29 2011 -0400" }, "message": "iwlagn: provide data after WARN_ON\n\nFrom time to time, we hit a WARN_ON in iwl_mac_remove_interface.\nThis basically means that we got out of sync with mac80211: the vif\nwe hold differs from the vif 80211 passes as parameter. Try to get\nsome data that will help to debug this.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "403ba56aedf2b3092e12219188e5c248f04c5acc", "tree": "13df88c8296787e7294e15c356292f810ba3a584", "parents": [ "b8c2b05e14fbe1ba3fffa31931a1a9ef8da933f9" ], "author": { "name": "Don Fry", "email": "donald.h.fry@intel.com", "time": "Thu Sep 15 11:46:39 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:29 2011 -0400" }, "message": "iwlagn: replace beacon_time_fsf_bits variable with #define\n\nAll devices use the same value for beacon_time_tsf_bits. Use the #define\n\nSigned-off-by: Don Fry \u003cdonald.h.fry@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b8c2b05e14fbe1ba3fffa31931a1a9ef8da933f9", "tree": "9dd9dc942488a53d481716effe910e2acd80cf7c", "parents": [ "5092e47afcbe6c470094c32095794b16083dfac2" ], "author": { "name": "Fry, Donald H", "email": "donald.h.fry@intel.com", "time": "Thu Sep 15 11:46:38 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:29 2011 -0400" }, "message": "iwlagn: simplify chain_noise_num_beacons indirection\n\nchain_noise_num_beacons is set and never changes. Use the #define\nrather than 3 levels of indirection.\n\nSigned-off-by: Don Fry \u003cdonald.h.fry@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5092e47afcbe6c470094c32095794b16083dfac2", "tree": "d92340c8e42c7b51f3487ebb13916aead64b3900", "parents": [ "ff647af65656b731f81d2216e01d3d1dcb2130bf" ], "author": { "name": "Fry, Donald H", "email": "donald.h.fry@intel.com", "time": "Thu Sep 15 11:46:37 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:29 2011 -0400" }, "message": "iwlagn: fix modinfo display for 135 ucode.\n\nThe modinfo report for 135 ucode is iwlwifi-135-IWL135_UCODE_API_MAX.ucode\nChange to show the value of the define: iwlwifi-135-6.ucode\n\nSigned-off-by: Don Fry \u003cdonald.h.fry@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ff647af65656b731f81d2216e01d3d1dcb2130bf", "tree": "99c871144f39fc11e27fa727fcc44ff1e5a8ca33", "parents": [ "9845ad22fdac09109d230bd4070311c98b119ebe" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Thu Sep 15 11:46:36 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:28 2011 -0400" }, "message": "iwlagn: New SKU for 6005 SFF\n\nAdding another SKU for 6005 series devices.\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9845ad22fdac09109d230bd4070311c98b119ebe", "tree": "e2d70d845358c814c6f86b98928a5f8307532dc2", "parents": [ "21023e2696679bea2a42aa963de74ce37c049b13" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Thu Sep 15 12:47:26 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:28 2011 -0400" }, "message": "iwlagn: Convert kzalloc to kcalloc\n\nConvert kzalloc to kcalloc, coalesce multiple lines too.\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "21023e2696679bea2a42aa963de74ce37c049b13", "tree": "54b131fa61ce63c5ceeb85425d88035773485552", "parents": [ "eeb7f8cb93966250e5768ea9f8fec8830567c02a" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Sep 15 11:46:34 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:27 2011 -0400" }, "message": "iwlagn: add documentation to the transport layer\n\nand do a few clean up fixes on the way\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eeb7f8cb93966250e5768ea9f8fec8830567c02a", "tree": "a2070a55b1240d9da4747e631481dc994bd1d5c1", "parents": [ "14991a9d8469ccac12c5d243e975d3ab78c8238a" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Sep 15 11:46:33 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:27 2011 -0400" }, "message": "iwlagn: document the bus layer API\n\nAdd documentation to the bus layer API - iwl-bus.h\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "14991a9d8469ccac12c5d243e975d3ab78c8238a", "tree": "362d38fb41764ccad9cfe8e1f79cbcbeec907927", "parents": [ "859cfb0a99369cf51dc2125ebc3476382a15c322" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Sep 15 11:46:32 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:27 2011 -0400" }, "message": "iwlagn: use enum iwl_rxon_context_id instead of u8\n\nenum iwl_rxon_context_id is the right type to use when we need a\nrxon_context_id.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "859cfb0a99369cf51dc2125ebc3476382a15c322", "tree": "1055d9595b5967d3e06273e33fdf2fb876dbc844", "parents": [ "909e9b23e4b1d4a783e8d2e5e2c865b7ebdb0675" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Sep 15 11:46:31 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:26 2011 -0400" }, "message": "iwlagn: move iwl_stop / wake_queue to the upper layer\n\nAdd a wrapper in the upper layer to call the mac80211\u0027s function.\nThis allows not to have the transport layer call mac80211 directly.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "909e9b23e4b1d4a783e8d2e5e2c865b7ebdb0675", "tree": "159399076b9c7aa6b7ca6aae2a7db91343aedfd1", "parents": [ "39644e9ac5329dc92d9547976c8f30f18da90097" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Sep 15 11:46:30 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:26 2011 -0400" }, "message": "iwlagn: free the Tx cmd when a non empty Tx queue is freed\n\nWhen a non-empty Tx queueis freed, the buffer it contains must be\nfreed too. Since the Tx cmd are now allocated from a pool, the Tx\ncmd must be freed too.\n\nThis patch avoids to destroy a non-empty pool of Tx cmd.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "39644e9ac5329dc92d9547976c8f30f18da90097", "tree": "1f6bedca889d1deb8f78d377a0940001e979ab7d", "parents": [ "17a68dd7bc25b3671d54b3b371df9b5baf985b20" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Sep 15 11:46:29 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:26 2011 -0400" }, "message": "iwlagn: unmap cmd queue\u0027s tfds as BIDI\n\nIf the driver is unloaded while there is still a host command in\nflight, its tfd will be freed by iwl_tx_queue_free.\nThis function is called for both types of queues: Tx queues and cmd\nqueue. This didn\u0027t take in count the fact that in Tx queues, tfds are\nmapped as TO_DEVICE (besides the first TB), whereas in cmd queue, all\nTBs are mapped as BIDI.\n\nHence, tx_queue_free unmapped the second (and higher) TB of each tfd\nin the cmd queue as TO_DEVICE, whereas they must be freed as BIDI.\nThis means that if a multi TFD is in flight while we unload the\ndriver (which is quite unlikely but can happen), we will get the\nwarning below.\n\nThis patch fixes this.\n\n[ 445.234060] ------------[ cut here ]------------\n[ 445.236273] WARNING: at lib/dma-debug.c:861 check_unmap+0x337/0x780()\n[ 445.236654] iwlagn 0000:02:00.0: DMA-API: device driver frees DMA memory with different direction [device address\u003d0x0000000126950540] [size\u003d8 bytes] [mapped with DMA_BIDIRECTIONAL] [unmapped with DMA_TO_DEVICE]\n[ 445.236654] Modules linked in: ...\n[ 445.236654] Pid: 1415, comm: modprobe Not tainted 3.1.0-rc4-wl-65912-g5215ff1-dirty #79\n[ 445.236654] Call Trace:\n[ 445.236654] [\u003cffffffff81043a51\u003e] warn_slowpath_common+0x71/0xa0\n[ 445.236654] [\u003cffffffff81043b37\u003e] warn_slowpath_fmt+0x47/0x50\n[ 445.236654] [\u003cffffffff8121e687\u003e] check_unmap+0x337/0x780\n[ 445.236654] [\u003cffffffff810e9136\u003e] ? free_one_page+0x156/0x320\n[ 445.236654] [\u003cffffffff8121ec5a\u003e] debug_dma_unmap_page+0x5a/0x60\n[ 445.236654] [\u003cffffffffa021d701\u003e] iwlagn_unmap_tfd.isra.11+0x121/0x1c0 [iwlagn]\n[ 445.236654] [\u003cffffffffa021ddf2\u003e] iwlagn_txq_free_tfd+0x42/0x70 [iwlagn]\n[ 445.236654] [\u003cffffffffa02121de\u003e] iwl_tx_queue_unmap+0x4e/0x70 [iwlagn]\n[ 445.236654] [\u003cffffffffa0212fad\u003e] iwl_trans_pcie_tx_free+0x10d/0x440 [iwlagn]\n[ 445.236654] [\u003cffffffff81064959\u003e] ? destroy_workqueue+0xb9/0x1e0\n[ 445.236654] [\u003cffffffffa021330a\u003e] iwl_trans_pcie_free+0x2a/0x2c0 [iwlagn]\n[ 445.236654] [\u003cffffffffa022f4f2\u003e] iwl_remove+0x149/0x17e [iwlagn]\n[ 445.236654] [\u003cffffffffa022f546\u003e] iwl_pci_remove+0x1f/0x65 [iwlagn]\n[ 445.236654] [\u003cffffffff81228337\u003e] pci_device_remove+0x47/0x120\n[ 445.236654] [\u003cffffffff8134566c\u003e] __device_release_driver+0x7c/0xe0\n[ 445.236654] [\u003cffffffff81345dc8\u003e] driver_detach+0xc8/0xd0\n[ 445.236654] [\u003cffffffff813454c8\u003e] bus_remove_driver+0x88/0xe0\n[ 445.236654] [\u003cffffffff81346572\u003e] driver_unregister+0x62/0xa0\n[ 445.236654] [\u003cffffffff812271d4\u003e] pci_unregister_driver+0x44/0xc0\n[ 445.236654] [\u003cffffffffa0211ce5\u003e] iwl_pci_unregister_driver+0x15/0x20 [iwlagn]\n[ 445.236654] [\u003cffffffffa022f595\u003e] iwl_exit+0x9/0xa74 [iwlagn]\n[ 445.236654] [\u003cffffffff810918f4\u003e] sys_delete_module+0x184/0x240\n[ 445.236654] [\u003cffffffff81452ece\u003e] ? retint_swapgs+0xe/0x13\n[ 445.236654] [\u003cffffffff8121098e\u003e] ? trace_hardirqs_on_thunk+0x3a/0x3f\n[ 445.236654] [\u003cffffffff81459e2b\u003e] system_call_fastpath+0x16/0x1b\n[ 445.236654] ---[ end trace 1fbc362b7dbe5d74 ]---\n[ 445.236654] Mapped at:\n[ 445.236654] [\u003cffffffff8121d7cb\u003e] debug_dma_map_page+0x8b/0x150\n[ 445.236654] [\u003cffffffffa021e7b7\u003e] iwl_enqueue_hcmd+0x837/0xa40 [iwlagn]\n[ 445.236654] [\u003cffffffffa021f92d\u003e] iwl_trans_pcie_send_cmd+0x8d/0x580 [iwlagn]\n[ 445.236654] [\u003cffffffffa01f7c75\u003e] iwl_send_calib_results+0x75/0xd0 [iwlagn]\n[ 445.236654] [\u003cffffffffa01f21f6\u003e] iwlagn_alive_notify+0x196/0x1f0 [iwlagn]\n[ 445.386500] iwlagn 0000:02:00.0: PCI INT A disabled\n\nReported-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "17a68dd7bc25b3671d54b3b371df9b5baf985b20", "tree": "da9653ce80b71fda5017f5c7e9a73be7a74c5430", "parents": [ "d2c71c20789189cd01978efcbdd61231f5929eaf" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Thu Sep 15 11:46:28 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:26 2011 -0400" }, "message": "iwlagn: warn about buggy fw that doesn\u0027t set SEQ_RX_FRAME\n\nThe way we check if there is host command that should be reclaimed is\nway too complicated. We should have a clear indication from the fw.\nThe fw is expected to set the SEQ_RX_FRAME bit if the frame was\noriginated by the fw which indicates to the driver that there is no\nhost command to free.\nSomehow, there seem to have been buggy fw out there, hence the very\nold comment.\n\nThis code checks if we have still buggy fw out there.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d2c71c20789189cd01978efcbdd61231f5929eaf", "tree": "e07b098ba41d615ad6bc46f826667eb6371331c6", "parents": [ "05bfe3d2a5794cc9e9b8119f36d1d7848ecd8967" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Thu Sep 15 19:02:54 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:25 2011 -0400" }, "message": "ath9k: Reset caldata on radio enable\n\nNot doing so, the caldata continues to retain older history\nvalues learned on that channel. It is always safer to start\nnoise floor calibration from the defaults after the assoication.\nSo this patch resets the nf history buffer when none of the\nSTA vifs are associated.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "05bfe3d2a5794cc9e9b8119f36d1d7848ecd8967", "tree": "e2886e56332ce71f12d7837b40ce664226938ac6", "parents": [ "e9c10469cf3c71bc1c6b0f01319161e277d6ac9b" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Thu Sep 15 19:02:53 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:25 2011 -0400" }, "message": "ath9k: load noise floor from history after the full chip reset\n\nCurrently during the full reset, the nf calibration is always\nrestarted from the defaults. The noise floor history buffers are\nnever be used again after the scan and ath reset. This patch\nensures that nf histories are always be used that helps to\nimprove the signal quality on congested environment\n\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e9c10469cf3c71bc1c6b0f01319161e277d6ac9b", "tree": "1ce8688210d2bc7c6e62b17e0ac40fc9c8066e91", "parents": [ "491b209d06192a8b93d226b4e5d7399747bf01ef" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Thu Sep 15 19:02:25 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:25 2011 -0400" }, "message": "ath9k_hw: Fix magnitude/phase coeff correction\n\nDo the magnitude/phase coeff correction only if the outlier\nis detected. Updating wrong magnitude/phase coeff factor\nimpacts not only tx gain setting but also leads to poor\nperformance in congested networks. In the clear environment\nthe impact is very minimal because the outlier happens\nvery rarely according to the past experiment. It occured\nless than once every 1000 calibrations.\n\nCc: stable@kernel.org\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "491b209d06192a8b93d226b4e5d7399747bf01ef", "tree": "799a93be3a720536ff1c36439cf2aecc196d02a8", "parents": [ "bf3f204b92c48c4afa3e827dfe98353560d9aa7f" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Sep 15 14:25:38 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:25 2011 -0400" }, "message": "ath9k_hw: remove ar9100_hw_compute_pll_control\n\nAR913x uses the same PLL register layout as AR9160 and later.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bf3f204b92c48c4afa3e827dfe98353560d9aa7f", "tree": "2b8c37bf9d5f055be8fdf4c10868d14371e4e76a", "parents": [ "d7084da0ceeddb9caf84de20cf687bb4a9b842b1" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Sep 15 14:25:37 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:25 2011 -0400" }, "message": "ath9k_hw: fix setting the hardware diversity flag\n\nath9k_hw_set_diversity is only called from init.c where it cannot affect\nthe hardware setting because it\u0027s cleared on the next reset.\nInstead of using a PHY op for something that\u0027s supposed to be initialized\nstatically, set the register value directly in the INI override function.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d7084da0ceeddb9caf84de20cf687bb4a9b842b1", "tree": "eeabbf0208421cde5540ed83a66b953d4e788dd8", "parents": [ "1b8714f7dcd8b41cd2843c42a6cc16ba2d4c899f" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Sep 15 14:25:36 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:24 2011 -0400" }, "message": "ath9k_hw: remove dead code in the eeprom ops\n\nThe eeprom .set_addac function is only necessary for AR9160, remove it\nfrom eeprom_4k.c and remove the dummy function from eeprom_9287.c\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1b8714f7dcd8b41cd2843c42a6cc16ba2d4c899f", "tree": "688f620b947800947b1cb4eed2add3572b209813", "parents": [ "f11cc949fd9fed7040eba39eab11e7bee274b527" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Sep 15 14:25:35 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:58:24 2011 -0400" }, "message": "ath9k_hw: clean up hardware revision checks\n\n- AR_SREV_5416_20_OR_LATER is always true, remove it\n- AR_SREV_9280_20_OR_LATER is always true within eeprom_4k.c and eeprom_9287.c\n- (AR_SREV_9271 || AR_SREV_9285) is always true in eeprom_4k.c\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f11cc949fd9fed7040eba39eab11e7bee274b527", "tree": "13e3b01939feb1726240d761b9279a914f09e467", "parents": [ "0c28ec587a2f061b93a98ac02a53b4152cbe48f4" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Sep 15 12:59:49 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:49:11 2011 -0400" }, "message": "ath9k: sync the dma buffer after changing the retry flag\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0c28ec587a2f061b93a98ac02a53b4152cbe48f4", "tree": "fa65521de60bc77f44eee5c0314543108f856c9c", "parents": [ "6e82bc4a5bf3a1ce597324c8667baa6a2ed12604" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Thu Sep 15 11:53:01 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:49:11 2011 -0400" }, "message": "cfg80211: add cfg80211_find_vendor_ie() function\n\nAdd function to find vendor-specific ie (along with\nvendor-specific ie struct definition and P2P OUI values)\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6e82bc4a5bf3a1ce597324c8667baa6a2ed12604", "tree": "9ee0750fb4847fe0434a00d2e1ead08ed86cb8ff", "parents": [ "42cecc3465578e442b794851fd8802dcb85a192c" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Sep 15 10:03:12 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:49:11 2011 -0400" }, "message": "ath9k: fix setting the IEEE80211_TX_CTL_CLEAR_PS_FILT flag\n\nWhen the driver inserts padding between the 802.11 header and data, it\nneeds to set the hdr variable to the new header location.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "42cecc3465578e442b794851fd8802dcb85a192c", "tree": "7f9b668f70b2b6725eae0413f2dce82246ce7cf9", "parents": [ "376cf5d3fd3c84855f1bf8d62aa05b7e4bcf1b8c" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:42:31 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:42:31 2011 -0400" }, "message": "Revert \"ath9k: do not insert padding into tx buffers on AR9380+\"\n\nThis reverts commit 4245d31347bdc99a608dc1d1cfe64e44aa3d1771.\n" }, { "commit": "376cf5d3fd3c84855f1bf8d62aa05b7e4bcf1b8c", "tree": "5e34c6012ed5c2f1ef1dae2e34858be23f46773c", "parents": [ "12e62d6f7ec475e546b40bece2045da15d6c21ef", "045c745f8ccdb584ccc97f068c7c10c1090fbcf9" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:42:21 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 15:42:21 2011 -0400" }, "message": "Merge branch \u0027for-linville\u0027 of git://github.com/lucacoelho/wl12xx\n" }, { "commit": "8c23516fbb209ccf8f8c36268311c721faff29ee", "tree": "2278e36af35b77f4b4cb5ba402adf1b90c4bacfa", "parents": [ "5d59bbce3d5fba0c612e830f919e003d3da90d70" ], "author": { "name": "Manual Munz", "email": "freifunk@somakoma.de", "time": "Sun Sep 18 18:24:03 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 14:51:51 2011 -0400" }, "message": "b43: Fix beacon problem in ad-hoc mode\n\nIn ad-hoc mode, driver b43 does not issue beacons.\n\nSigned-off-by: Manual Munz \u003cfreifunk@somakoma.de\u003e\nTested-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: Stable \u003cstable@kernel.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5d59bbce3d5fba0c612e830f919e003d3da90d70", "tree": "88ff63fb1c462021992f196fefec5ea459291d9c", "parents": [ "2249b011432ca3dcce112f0f71e0f531b4bb9347", "f78b68261e80899f81a21dfdf91e2a1456ea8175" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 14:47:29 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 14:47:29 2011 -0400" }, "message": "Merge branch \u0027for-3.1\u0027 of git://github.com/padovan/bluetooth-next\n" }, { "commit": "f78b68261e80899f81a21dfdf91e2a1456ea8175", "tree": "89ab533f8fa8dd72ae8f70b1c2983ae9cc5ce60b", "parents": [ "a63b723d02531f7add0b2b8a0e6a77ee176f1626" ], "author": { "name": "Jurgen Kramer", "email": "gtmkramer@xs4all.nl", "time": "Sun Sep 04 18:01:42 2011 +0200" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Sat Sep 17 17:16:03 2011 -0300" }, "message": "Bluetooth: add support for 2011 mac mini\n\nToday I noticed that the usb bluetooth adapter (BCM2046B1) on my 2011\nmac mini was not working. I\u0027ve created a patch to get it going.\n\nSigned-off-by: Jurgen Kramer \u003cgtmkramer@xs4all.nl\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "a63b723d02531f7add0b2b8a0e6a77ee176f1626", "tree": "8ecbd270ca082c78c787d1cf32ca30d4de4ea201", "parents": [ "8be964d2364e8fbe302850f60d9d514c3e134510" ], "author": { "name": "Pieter-Augustijn Van Malleghem", "email": "p-a@scarlet.be", "time": "Wed Sep 07 02:28:10 2011 -0400" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Sat Sep 17 17:15:32 2011 -0300" }, "message": "Bluetooth: Add MacBookAir4,1 support\n\nThis patch against current git adds the hardware ID for the Apple\nMacBookAir4,1, released in July 2011. The device features a BCM2046\nUSB chip. The patch was inspired by the previous modifications adding\nsupport for the MacBookAir3,x.\n\nSigned-off-by: Pieter-Augustijn Van Malleghem \u003cp-a@scarlet.be\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "8be964d2364e8fbe302850f60d9d514c3e134510", "tree": "f7debac65b011dab76420bd997269e0f3e9b23f0", "parents": [ "2d20a26a92f72e3bb658fe8ce99c3663756e9e7a" ], "author": { "name": "Chen Ganir", "email": "chen.ganir@ti.com", "time": "Tue Aug 30 13:58:28 2011 +0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Sat Sep 17 17:15:25 2011 -0300" }, "message": "Bluetooth: Fixed BT ST Channel reg order\n\nReordered the BT ST channel registration, to make sure that the\nevent channel is registered before all others. This prevents a\nsituation where incoming events may cause kernel panic in the ST\ndriver if the event channel is not yet registered to handle\nincoming events.In addition, the deregistration of the channels\nwas also modified, to be in the reversed order of the registration,\nto allow the event channel to be the last one unregistered.\n\nSigned-off-by: Chen Ganir \u003cchen.ganir@ti.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "12e62d6f7ec475e546b40bece2045da15d6c21ef", "tree": "de06d66bf3bf4e614488ccd5fcaf9a36fa720afb", "parents": [ "7107676a3a46415c27186bc7d5ce988498897c66" ], "author": { "name": "Kalle Valo", "email": "kvalo@qca.qualcomm.com", "time": "Tue Sep 13 10:21:25 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:43 2011 -0400" }, "message": "MAINTAINERS: update ath6kl\n\nIt\u0027s not in staging anymore and I\u0027m the current maintainer.\n\nCc: Luis R. Rodriguez \u003cmcgrof@gmail.com\u003e\nCc: Naveen Singh \u003cnvesing@qca.qualcomm.com\u003e\nSigned-off-by: Kalle Valo \u003ckvalo@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7107676a3a46415c27186bc7d5ce988498897c66", "tree": "a70b00e5ab4646044cb47d9def3b204bde1ab437", "parents": [ "4245d31347bdc99a608dc1d1cfe64e44aa3d1771" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Sep 15 09:37:46 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:42 2011 -0400" }, "message": "mac80211: fix endian issues and comments for BAR failure handling\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCc: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4245d31347bdc99a608dc1d1cfe64e44aa3d1771", "tree": "0e0dbf7f829660ad4abe2dc24dc68040f458104d", "parents": [ "3afd21e7c5b3b6312193fbee628b000dce82ecf5" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:27 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:42 2011 -0400" }, "message": "ath9k: do not insert padding into tx buffers on AR9380+\n\nWith the new EDMA descriptor format, a single descriptor can contain up\nto four buffer pointers. By splitting the buffer into two parts, we can\nlet the hardware add the padding internally instead of using memmove on\nthe skb data.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3afd21e7c5b3b6312193fbee628b000dce82ecf5", "tree": "1d2ec443c77b14bcd9cbad4ce4612091c387292e", "parents": [ "bdf2dbfb084f421dc6dc2f2234194ddb6ec2ea8d" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:26 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:41 2011 -0400" }, "message": "ath9k: optimize ath_tx_rc_status usage\n\nThe only flag that needs to be set when ath_tx_rc_status is called with\nrc_update \u003d\u003d false is the IEEE80211_TX_STAT_TX_FILTERED flag. All other\ndata is ignored in that case.\nThis flag can be set from ath_tx_complete_buf instead, so that we can\ndrop a few redundant calls to ath_tx_rc_status and remove the rc_update\nfunction parameter\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bdf2dbfb084f421dc6dc2f2234194ddb6ec2ea8d", "tree": "0f46b84ab183f53aa1b3384f28f6ae67a78ab16b", "parents": [ "c6c539f023423a7a730f5759be1b3b45c2d1d1ca" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:25 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:41 2011 -0400" }, "message": "ath9k: remove a redundant check in ath_tx_form_aggr\n\nath_lookup_legacy now checks all the tx rate flags for MCS vs legacy\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c6c539f023423a7a730f5759be1b3b45c2d1d1ca", "tree": "ac2d4e4963b0b975e8881d2c22ed397fadeb488c", "parents": [ "66ac69c8c3bd176b49c19e52c37449dec24c9588" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:24 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:41 2011 -0400" }, "message": "ath9k: optimize ath9k_ps_restore\n\nath_hw_cycle_counters_update only needs to be called if the power state\nchanges. Most of the time this does not happen, even when ps_usecount\ngoes down to 0.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "66ac69c8c3bd176b49c19e52c37449dec24c9588", "tree": "a6cacb30430799efca26ee5e872d43a25356ac30", "parents": [ "493cf04fd37bf265dc3c9aad357e3e34654c86e3" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:23 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:40 2011 -0400" }, "message": "ath9k_hw: remove the old tx descriptor API\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "493cf04fd37bf265dc3c9aad357e3e34654c86e3", "tree": "834da35a27d459a4ed0a8208616a51e327c29ba5", "parents": [ "2b63a41d14245345d6c498506c5634613afa80c0" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:22 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:40 2011 -0400" }, "message": "ath9k: use the new API for setting tx descriptors\n\nWith the new API, tx descriptors can be written in one single pass\ninstead of having to re-read and rewrite fields from multiple places.\nThis makes the code easier to read and also slightly improves performance\non embedded MIPS hardware.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2b63a41d14245345d6c498506c5634613afa80c0", "tree": "57fd8b8779ded0436c29a495cb522c30ffc91ae4", "parents": [ "60f8cc60fa41b8c44662a3a4d99862e3b81cfa6f" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:21 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:39 2011 -0400" }, "message": "ath9k_hw: add a new API for setting tx descriptors\n\nInstead of using lots of different functions with long argument lists,\npull all the necessary information from one struct. This makes the code\neasier to read and eliminates the need for copying data between multiple\nlinked descriptors.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "60f8cc60fa41b8c44662a3a4d99862e3b81cfa6f", "tree": "b8494ca93fd0fbb6ba49a27a103626efdb18fd05", "parents": [ "7a2721a3233d32c958a474f78c20e25c9efa221c" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:20 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:39 2011 -0400" }, "message": "ath9k_hw: do not recalculate the descriptor checksum in ar9003_hw_fill_txdesc\n\nReduces the number of accesses to uncached descriptor memory.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7a2721a3233d32c958a474f78c20e25c9efa221c", "tree": "e1ff96e2fa66d61107f7c3d7063bc891436143d2", "parents": [ "38dad7ba60475618d873fe703e7ef564a963fd1f" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:19 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:38 2011 -0400" }, "message": "ath9k: call ath9k_hw_set_desc_link for beacon descriptors\n\nThis ensures that only ath9k_hw_set_desc_link needs to recalculate the tx\ndescriptor checksum on AR9380+\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "38dad7ba60475618d873fe703e7ef564a963fd1f", "tree": "a9394c3af29a00a61b0bf1fe8bdc024d008c2322", "parents": [ "399c64895d206b16c704827d0a71b7467e441c94" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:18 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:37 2011 -0400" }, "message": "ath9k: move ath_buf_set_rate to remove a forward declaration\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "399c64895d206b16c704827d0a71b7467e441c94", "tree": "0934a49906ee247aa9bb16706c54f7641e468a48", "parents": [ "55797b1ae5bfc33f1c0f978cdc7cd89a8d9460fc" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:17 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:37 2011 -0400" }, "message": "ath9k: reduce the number of functions that access the tx descriptor\n\nMakes it easier to clean up the ath9k_hw descriptor API\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "55797b1ae5bfc33f1c0f978cdc7cd89a8d9460fc", "tree": "a6f2750f258529b857b862b1a5a014ed5be95895", "parents": [ "3483288caf3d979e6b032d62f75f57893adf0d53" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:24:16 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:37 2011 -0400" }, "message": "ath9k: remove ATH_TX_XRETRY and BUF_XRETRY flags\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3483288caf3d979e6b032d62f75f57893adf0d53", "tree": "ee4dc8132ca65f083cbe89f1b73c7a18586be3af", "parents": [ "c31c8261bf7b817e323d29ba66c031f6b0982680" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:23:03 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:37 2011 -0400" }, "message": "ath9k: ensure that rx is not enabled during a reset\n\nDuring a reset, rx buffers are flushed after rx has been disabled. To avoid\nrace conditions, rx needs to stay disabled during the reset, so avoid any\ncalls to ath9k_hw_rxena in that case.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c31c8261bf7b817e323d29ba66c031f6b0982680", "tree": "fd0c61fadfe6753c0a00d74a01315aa4771ca987", "parents": [ "e392700741a4a5f061f3fcc9f5f2ceb0e0b0953e" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:23:02 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:36 2011 -0400" }, "message": "ath9k: make beacon timer initialization more reliable\n\nWhen starting the AP beacon timer, it assumes that the TSF has recently\nbeen cleared. Set the SC_OP_TSF_RESET flag to ensure that this is always\nthe case.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e392700741a4a5f061f3fcc9f5f2ceb0e0b0953e", "tree": "93fa2813c5c182042dc510bf0c4de35d210196e0", "parents": [ "c5d2593bad0d3440ce3b464d9e3c514d364820f8" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 14 21:23:01 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:36 2011 -0400" }, "message": "ath9k: fix enabling interrupts after a hardware error interrupt\n\nThe interrupt handler increases the interrupt disable refcount, so the\ntasklet needs to always call ath9k_hw_enable_interrupts.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c5d2593bad0d3440ce3b464d9e3c514d364820f8", "tree": "c06bd750ebbe74fe4ae9502e476e6265502c29be", "parents": [ "79ac9b3033eef5dd1144da035cf18b00e35ddf48" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mohammed@qca.qualcomm.com", "time": "Wed Sep 14 15:09:40 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:35 2011 -0400" }, "message": "ath9k: Fix PS wrappers and enabling LED\n\nin ath_pci_resume it seems we are not enabling LED properly, in addition\nwe have a PS wrapper fix for this\n\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmohammed@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "79ac9b3033eef5dd1144da035cf18b00e35ddf48", "tree": "04e3571534d1ac57d2cb32733cea44f700c41d79", "parents": [ "7db062ac4bafac040afb28faf355fc2acb426413" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mohammed@qca.qualcomm.com", "time": "Wed Sep 14 15:09:13 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:35 2011 -0400" }, "message": "ath9k: enable LED pin for AR946/8x chipsets\n\nnow the LED starts working for AR946/8x chipsets\n\nCc: \"Balasubramanian, senthilkumar\" \u003csenthilb@qca.qualcomm.com\u003e\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmohammed@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7db062ac4bafac040afb28faf355fc2acb426413", "tree": "4ef63b8d821a16d70c3ef8ba2d354ea54f3a11a7", "parents": [ "b54af8af49cd93c1ac33e3a8f0bb2f5acc8c7d0e" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Wed Sep 14 14:20:30 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:34 2011 -0400" }, "message": "ath9k_hw: Do full chip reset on 11A channels for AR9003\n\nAR9003 seems to have issues sometimes with fast channel change\nin 5GHz and this case is handled specifically for AR9280 by doing\na full reset. Let\u0027s do a full reset for 5GHz channles of AR9380\n\u0026 for all channels of AR9280 pci chips.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b54af8af49cd93c1ac33e3a8f0bb2f5acc8c7d0e", "tree": "8e13af953ddbf099d6897a37a97138e33f1cc6ff", "parents": [ "2577c6e8f2320f1d2f09be122efef5b9118efee4" ], "author": { "name": "Senthil Balasubramanian", "email": "senthilb@qca.qualcomm.com", "time": "Tue Sep 13 22:38:19 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:34 2011 -0400" }, "message": "ath9k_hw: move register definitions to header files\n\nMove the register macros to appropriate header files to be in\nsync with other register definitions and also a single place\nto refer everything.\n\nSigned-off-by: Senthil Balasubramanian \u003csenthilb@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2577c6e8f2320f1d2f09be122efef5b9118efee4", "tree": "7579057ce794fd093344a8ac24d6f37e136f881e", "parents": [ "4d0707e66d82f46998d49be98adea0e705647be1" ], "author": { "name": "Senthil Balasubramanian", "email": "senthilb@qca.qualcomm.com", "time": "Tue Sep 13 22:38:18 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:33 2011 -0400" }, "message": "ath9k_hw: Add support for AR946/8x chipsets.\n\nThis patch adds support for AR946/8x chipets.\n\nSigned-off-by: Senthil Balasubramanian \u003csenthilb@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4d0707e66d82f46998d49be98adea0e705647be1", "tree": "18c44e67a8c4a95821f90d4801a913de626f3129", "parents": [ "ce407afc1008a67969ae05717e86dcee9ce5de76" ], "author": { "name": "Senthil Balasubramanian", "email": "senthilb@qca.qualcomm.com", "time": "Tue Sep 13 22:38:17 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:32 2011 -0400" }, "message": "ath9k_hw: Split tx/rx gain table initval handling\n\nSplit tx/rx gain table initval hanlding part so readability\nis better and easy to manage the code.\n\nSigned-off-by: Senthil Balasubramanian \u003csenthilb@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ce407afc1008a67969ae05717e86dcee9ce5de76", "tree": "0d6ec269e1937a07b86811fd940cd7510f1eab6f", "parents": [ "910868db3f114df32387a9c51a729b2645febe4d" ], "author": { "name": "Senthil Balasubramanian", "email": "senthilb@qca.qualcomm.com", "time": "Tue Sep 13 22:38:16 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:45:32 2011 -0400" }, "message": "ath9k_hw: Add initvals and register definitions for AR946/8x chipsets.\n\nAdd initvals and register modifications required to support AR946/8x chipsets.\n\nSigned-off-by: Senthil Balasubramanian \u003csenthilb@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "910868db3f114df32387a9c51a729b2645febe4d", "tree": "00b0a9df523665670cf1a28c6fbcba39ae19e9a3", "parents": [ "bd1a272806e6554c54959f2b46f6d40c182468c0" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Sun Sep 11 09:46:55 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:36:35 2011 -0400" }, "message": "nl80211/cfg80211/mac80211: fix wme docs\n\nAdd/fix some missing docs.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bd1a272806e6554c54959f2b46f6d40c182468c0", "tree": "d254c7bac34710948cb6250e12b391a442ca2604", "parents": [ "55768fa6d9462c18c1ce3c862db3bf55bac3b1c7", "c6ceb8726f0cee28c6ff1101e6c326e6d86ea749" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:20:43 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:20:43 2011 -0400" }, "message": "Merge branch \u0027for-linville\u0027 of git://github.com/lucacoelho/wl12xx\n" }, { "commit": "2249b011432ca3dcce112f0f71e0f531b4bb9347", "tree": "42b581ea0fea915eb545fff4c675e0c36933765e", "parents": [ "3965ac00204e0ccd89e1e73ead4d2098dc8f7bd1" ], "author": { "name": "Don Fry", "email": "donald.h.fry@intel.com", "time": "Thu Sep 15 08:36:22 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 15:32:12 2011 -0400" }, "message": "iwlagn: workaround bug crashing some APs\n\nThis patch reverts commit 9b7688328422b88a7a15dc0dc123ad9ab1a6e22d which\nwas introduced in 2.6.38-rc1. It works around a problem where the iwlagn\ndriver stimulates a bug crashing (requiring power cycle to recover) some\nAPs under heavy traffic.\n\nCC: stable@kernel.org #2.6.39, #3.0.0 #3.1.0\nSigned-off-by: Don Fry \u003cdonald.h.fry@intel.com\u003e\nSIgned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3965ac00204e0ccd89e1e73ead4d2098dc8f7bd1", "tree": "b3d2ade77df83657ec06c778ebbcca49e910dfc2", "parents": [ "daabead1c32f331edcfb255fd973411c667977e8" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Thu Sep 15 15:12:29 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 15:32:11 2011 -0400" }, "message": "wireless: Fix rate mask for scan request\n\nThe scan request received from cfg80211_connect do not\nhave proper rate mast. So the probe request sent on each\nchannel do not have proper the supported rates ie.\n\nCc: stable@kernel.org\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "daabead1c32f331edcfb255fd973411c667977e8", "tree": "2b8b854628a6f4d0bee4cf5ae87417be773f5b49", "parents": [ "d331eb51e4d4190b2178c30fcafea54a94a577e8" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Wed Sep 14 16:50:23 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 15:32:10 2011 -0400" }, "message": "rtl2800usb: Fix incorrect storage of MAC address on big-endian platforms\n\nThe eeprom data is stored in little-endian order in the rt2x00 library.\nAs it was converted to cpu order in the read routines, the data need to\nbe converted to LE on a big-endian platform.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: Stable \u003cstable@kernel.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "d331eb51e4d4190b2178c30fcafea54a94a577e8" }