)]}' { "log": [ { "commit": "7f69b07b767b9aab79b737bef2fae0e9e7899ff9", "tree": "19f1dd5c5bd730a19603f755b5fe52eae77ffc43", "parents": [ "923cb1c39bb61d55128fb5220f88c8b63790963c", "62720dcf1bde433fb3f912c120f2e7050a74d3cd" ], "author": { "name": "Anh Nguyen", "email": "anguyen@codeaurora.org", "time": "Fri Nov 09 16:15:12 2012 -0800" }, "committer": { "name": "Anh Nguyen", "email": "anguyen@codeaurora.org", "time": "Fri Nov 09 16:15:12 2012 -0800" }, "message": "Merge remote-tracking branch \u0027remotes/quic/partner-android/android-msm-mako-3.4-wip\u0027 into mybranch\n\n* remotes/quic/partner-android/android-msm-mako-3.4-wip: (62 commits)\n timers: Fix endless looping between cascade() and internal_add_timer()\n nohz: Fix idle ticks in cpu summary line of /proc/stat\n workqueue: skip nr_running sanity check in worker_enter_idle() if trustee is active\n mmc: msm_sdcc: fix race conditions in runtime PM\n v4l2: fix the memory leak\n msm: camera: nullify pointers after kfree and fix the memory leaks\n mako: update display settings\n prima: release v3.2.1.11h\n prima: release v3.2.1.11g\n wcnss: Notify Kernel suspend/resume to WCNSS\n prima: release v3.2.1.11f\n msm: camera: fix the memory leak and null check after kmalloc\n Revert \"Revert \"mako: msm: board: enable HS200 bus speed mode support\"\"\n Revert \"mako_defconfig: set CONFIG_SLUB_DEBUG_ON\u003dy\"\n PM: Prevent runtime suspend during system resume\n v4l2: add NULL checks fh-\u003evdev\n use clamp_t in UNAME26 fix\n kernel/sys.c: fix stack memory content leak via UNAME26\n prima: null check after kzalloc\n prima: release v3.2.1.11e\n ...\n\nConflicts:\n\tdrivers/video/msm/msm_fb.c\n\nChange-Id: I738ec023cf844fc2ab62af9be8d5b88b6c4b5165\nSigned-off-by: Anh Nguyen \u003canguyen@codeaurora.org\u003e\n" }, { "commit": "4c24bca65d8ca1d7d4dad857917a41e21c66a97b", "tree": "12035f8603bbfae66e56feda5a0c64bb45ad75a7", "parents": [ "d45f96ccfc39bbbf839496ada72eddfac80cfe6f" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Fri Sep 07 17:22:57 2012 +0530" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Oct 29 10:48:15 2012 -0700" }, "message": "mfd: pm8xxx-spk: Fix settings for the class D audio amplifier\n\nTest results based on noise gate recommended the following settings\n\n0x254\u003d0xC8 (Threshold\u003d110, preamp bias\u003d01)\n0x255\u003d0xC1 (Hold\u003d110, max attn\u003d0000, mute\u003d1)\n0x256\u003d0xB0 (decay\u003d101, attack\u003d10, delay\u003d0)\n\nCRs-Fixed: 385187\nChange-Id: I7276a6d0689ffb475aa8c58214fd2b00fe62f81c\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n(cherry picked from commit 59442e223dcd616d7a244c85d8e0acccf4df9651)\n" }, { "commit": "33ddf5a9eaa031c00b00846458f2ba534e6807b8", "tree": "3ac1e0bc61ab20e737739579ab5f7969f575c49e", "parents": [ "5195d1b318975a0c9137b4225e04600ba0b91b92" ], "author": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Wed Oct 24 21:36:07 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Fri Oct 26 16:44:47 2012 -0700" }, "message": "power: pm8921-bms: use fixed ibat_avg instead of shutdown ibat_avg\n\nUsing stored average ibat(shutdown ibat_avg) which came from\nprevious boot sometimes cause SoC sudden drop in boot up time.\nSo this patch use fixed ibat_avg value instead of shutdown ibat_avg\nduring 1st SoC calculation.\n\nChange-Id: I9675652c3b4918529be40a8d6f8ee29b6dee1359\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n" }, { "commit": "58253c7c5b42f02d93610594d0d288446a51dafe", "tree": "a54944e3bd2fe122e8f3c5b36e031738964bc97c", "parents": [ "7d1db12a0866458a6e4f8527ab1e8faf564995a5" ], "author": { "name": "SathishKumar Mani", "email": "smani@codeaurora.org", "time": "Sat Oct 06 13:24:38 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Wed Oct 17 10:37:58 2012 -0700" }, "message": "ASoC: wcd9310: force slimbus ports to disconnect during error cases\n\nWith shared data channel architecture, SLIMBUS driver\nonly removes slimbus channel when all clients vote to\nhave channel removed. In case of subsystem restart,\nclient such as MDM can go down without withdrawing\nvote. During CODEC path shutdown, CODEC driver will\nreceive slimbus slave interrupt in time indicating\nport disconnection because slimbus channel has not\nbe been voted off. Then, CODEC driver blindly\nshutdown rest of CODEC path. This results in\noverflow error on Rx path and underflow error on\nTx path. In case of time out waiting for port disconnect\ninterrupts to arrive, force ports to disconnect\n\nSigned-off-by: SathishKumar Mani \u003csmani@codeaurora.org\u003e\nBUG-ID: 7313016\n" }, { "commit": "90e32fa7cb701d922825e40b82b566e4af843ea2", "tree": "dd1c4923b19489d5b2c8c9fc6bb8b7d225140395", "parents": [ "53150655bccdb6efbc7f93d87feb5dce93d3c547" ], "author": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Tue Oct 09 11:52:37 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Fri Oct 12 15:31:49 2012 -0700" }, "message": "power: pm8921-bms: support wireless charger bms\n\nSince WLC(wireless charger) supply power to battery without PM8921 charger,\nthe SoC value is not accurate. This patch adjust OCV(open circuit voltage)\nand max CV(constant voltage) value to compensate difference between\nWLC and pm8921-charger.\n\nChange-Id: I8fa368f706866d93451c2f663da69c010f9b2a35\n" }, { "commit": "3a3de0ee621625c8767e0d3c7106c52fcf834499", "tree": "1064e5022628097e9a1a0a727d1d589541e7df76", "parents": [ "40b8a9eff696c31dc7191ee60672ef965df2f3bf" ], "author": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Wed Oct 10 16:24:20 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Fri Oct 12 15:28:02 2012 -0700" }, "message": "mfd: pm8xxx: provide api to read restart reason\n\nThe BMS driver needs to know the restart reason of the pmic. Add\nan api in the pm8xxx design to provide the restart reason.\n\nChange-Id: I0bbad22c5fed8c32dd7de387194e94c8d4b9ad75\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "7a72ca62c3f64c7b914edd8d9dbb75933b3c845e", "tree": "f6444952123d3678d5c177b5ebc1e31483a55684", "parents": [ "19c87ddde66fd6aad61a60e466a75af235fca7f9" ], "author": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Thu Sep 20 21:50:16 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Mon Sep 24 21:38:39 2012 -0700" }, "message": "power: pm8921-charger: prevent recharging when batt is overheat\n\nWhen battery is forced to stop charging by overheat, re-charging\nshould not be initiated even if re-charging condition is satisfied.\n\nChange-Id: I0070039a186ccf3f12c0e79a8696a7aa3c61e538\n" }, { "commit": "76048dac5085eca4459ee5ea5dd4876a1f518cfa", "tree": "dd31c59ace1b2aa768177695debf2f10febd7a5b", "parents": [ "b09bf548b81ab117f95a9bce64490d239a16e574" ], "author": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Tue Sep 11 14:19:21 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Thu Sep 13 10:36:00 2012 -0700" }, "message": "power: pm8921-charger: use SoC % value for charging stop and resume\n\nCurrent pm8921 charger code doesn\u0027t consider the SoC % to determine\nend of charging and recharging state. This can cause weird UI display\non SoC % and charging state.\nFor example, charging is completed when SoC % is not reached 100% or\ncharging is not completed even if SoC % is already 100%.\nSo this patch change how to determine end of charging and recharging.\n\nChange-Id: Ice658488744d71117fedb64e0fa0eb7ad34c6573\n" }, { "commit": "45ccbb53cfc227fd3811e71b0bd813432c96ee9e", "tree": "9f03af718b33100cf489f79c2d30a02d4f88a14a", "parents": [ "165ca5e6fab55e87f90cebdfd4f91b54d9f4d5a7" ], "author": { "name": "choongryeol.lee", "email": "choongryeol.lee@lge.com", "time": "Sat Aug 25 00:15:42 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Wed Aug 29 10:24:08 2012 -0700" }, "message": "power: pm8921: consideration of ibat max overwrite\n\nThe thermal mitigation and battery temp control can overwrite\nthe ibat max value each other. So this patch remove the possibility\nof overwrite ibat max value by mitigation and battery temp control.\n\nChange-Id: Ib0f7bf2b8bd2e474d1d9c76bd5100b05310cb048\n" }, { "commit": "21d7afe4817a1879e8d7c99b83c26ef3f4f5691b", "tree": "58ac47a5ea16171fb7a5b0407ebb24a8a88519d8", "parents": [ "3f9b234be2dbafb7d113bf58df6093ef6445b441", "406a0a8400fd2d1d5b68c993e191f4c05a8c23a9" ], "author": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Fri Aug 24 19:44:50 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Fri Aug 24 19:44:50 2012 -0700" }, "message": "Merge commit \u0027406a0a8400fd2d1d5b68c993e191f4c05a8c23a9\u0027 into android-msm-mako-3.4-wip\n\n(needs additional patches to compile)\n\n* commit \u0027406a0a8400fd2d1d5b68c993e191f4c05a8c23a9\u0027: (450 commits)\n msm: vidc: Separate partition for shared memory\n arm/dt: Move MDSS device nodes to separate dtsi file\n msm: cpr: Add support for CPR in 8625\n defconfig: msm8974: enable genlock\n msm: Remove idle stats and cpuidle hooks\n msm: timer: Add a stub for msm_timer_get_timer0_base\n msm: iomap: Add mappings for the MPM PS_HOLD region\n msm: vidc: Adds support for Rate Control\n ASoc: msm: Add low latency playback and recording support.\n msm: Fix for overflow cpu alive mask dump.\n tty: hold lock across tty buffer finding and buffer filling\n msm: Turn off cpu alive mask messages.\n msm: kgsl: Add GPU clock statistics.\n Bluetooth: Enable BT\u0026FM kernel modules for MSM8974\n v4l2: Add mutex to streamon() and dqbuf()in v4l2 framework.\n msm: mdss: fix suspend coming to MDP before panel drivers\n msm: mdss: allocate framebuffer memory from ion pool\n msm: mdss: improve clock and bus scaling logic\n platform: msm: Add driver for QPNP PMIC clkdiv peripherals\n msm: add adsp loader driver\n ...\n\nConflicts:\n\tdrivers/base/power/main.c\n\tdrivers/power/pm8921-bms.c\n\tdrivers/power/pm8921-charger.c\n\tdrivers/usb/gadget/Kconfig\n\tdrivers/usb/gadget/android.c\n\tdrivers/usb/host/ehci-msm-hsic.c\n\tdrivers/video/msm/mdp4_overlay_dsi_video.c\n\tinclude/linux/mfd/pm8xxx/pm8921-charger.h\n\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n" }, { "commit": "325995993eb806285a35381e803ed5432fe5a93a", "tree": "db177ca2bde9794b8b3f00426d3256d3170337a7", "parents": [ "becd528c3144bad5b38c64cbdbd3c01fb926af33" ], "author": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Wed Aug 22 11:40:44 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Wed Aug 22 12:48:18 2012 -0700" }, "message": "power: battery: add battery temperature control\n\nThe battery temperature should be controlled for safty.\nSo this patch indroduce battery temperature control.\n\nChange-Id: Ia00e7ce5bf697591be2da94f9a7c2960738642d5\n" }, { "commit": "b19ebbc8e9ae70752e7e03b345d8a480b9ca8afa", "tree": "5bc24950999d3849f1e6fefe8a7359b20bd26fa3", "parents": [ "dac592e6b07ec1cb082c45c33de1248ffb7ab47f" ], "author": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Fri Aug 10 20:31:05 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Tue Aug 21 21:29:43 2012 -0700" }, "message": "pm8xxx-adc: add the functions to set tuning parameters\n\nWe need to tune the board specific adcmap parameters\nSo need functions to set specific parameters.\n\nvoid pm8xxx_set_adcmap_btm_threshold(void *pts, int size)\nvoid pm8xxx_set_adcmap_pa_therm(void *pts, int size)\nvoid pm8xxx_set_adcmap_ntcg_104ef_104fb(void *pts, int size)\n\nChange-Id: Ie78c11f5fb998ecc456defa3c8e3e7a3e0b9b45f\n" }, { "commit": "d6d66c7d72dac060838803d48532ed5366d3fc30", "tree": "b026fbd1d40f36ed9fabb2eac5451d88b210850f", "parents": [ "dc3323a7ec9c28fbda722461e28aee1b7d5e5eab" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 06 14:02:51 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 15 19:47:05 2012 -0700" }, "message": "power: pm8921-bms: charging curve adjustments\n\nIt was observed that while charging the reported soc sometimes reaches\n100% before end of charging happens. At other times it does not reach\n100% at end of charge and a abrupt jump to 100% soc happens.\n\nFix this by linearly increasing soc based on battery charge current\nafter constant voltage phase is reached. Constant voltage phase is\nreached when battery voltage reaches the max value.\n\nAlso once constant voltage phase is reached and the voltage or charge\ncurrent decreases keep reporting the earlier soc. This could be because\nof a transient system load.\n\nChange-Id: I14c2f42d7897041db038ce85ce1124cf1ef261af\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "720b00eab6f2d242b3a7b8d04c959b53d5f6dd0a", "tree": "7ef7dca4af727db9383353ea72a4f2fefc102555", "parents": [ "a7daba5a416a0be4be882892ad3af039fc8548e8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 01 21:33:09 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 15 19:47:03 2012 -0700" }, "message": "power: pm8921-bms: limit voltage correction\n\nThe \"adjust_soc\" algorithm where we change the open circuit voltage\n(ocv) in steps so that the state of charge (soc) starts approaching\nthe estimated soc, causes nonlinearity in the soc curves if an incorrect\nresistance value is fed to the algorithm.\n\nAs battery ages and temperature changes, it is hard to estimate the\nexact battery resistance.\n\nSo to fix the nonlinearity, limit the amount by which the ocv is\nchanged. Make it proportional to the current, i.e. change ocv by\nsmall amounts in light load and let it change by proportionally\nlarge amounts in heavy load situations.\n\nAlso, make the point where the soc is adjusted configurable via platform\ndata instead of forcing it to 25%.\n\nChange-Id: Idc141e6bf3172dab278afe1900f5a1f9cdd624dd\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "1f4cc51652fe817658243f11b1a898f75e63b86d", "tree": "d7041ddb295a15f89d3e940a614b6fdca2e27c40", "parents": [ "d74be6b041373f9fe3e9e6965c0a32afb9c1d653" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Sat Jul 21 00:10:39 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 15 19:47:01 2012 -0700" }, "message": "power: pm8921-bms: provide option to ignore shutdown soc\n\nFew platforms do not want to use the shutdown soc. Provide a option to\nselectively disable it.\n\nChange-Id: Ie57d474f4e81e4ce2e7e7a4a92cda20d4c8dd184\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "602dc27937d97dcc5d556dd30da24718743dd8d2", "tree": "a1d74ae1a71243729aef8196ccce6c0480f39f16", "parents": [ "52daf656f6abe40b1011aa4aa5b746ebc166fc43" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jul 19 21:34:56 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 15 12:41:25 2012 -0700" }, "message": "power: pm8921-bms: use shutdown soc if it is within limits\n\nWhen a strong battery is removed, it was seen that the battery voltage\nlines on the phone take about five to six seconds to go below 2.1volts\nwhere the pmic resets all the battery backed registers.\n\nIf a new battery is plugged in within this time the driver will force\nthe shutdown soc on this battery which is incorrect.\n\nCompare the shutdown soc with the calculated soc and if they are\ndifferent than a configurable limit, simply discard the shutdown soc\nand use the calculated soc.\n\nChange-Id: I02e7c78eb5e9df0127ce7e78b0bd9792a8141039\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "a51c87b1fba04e163b7239e140ea366889db9c5e", "tree": "35eeb3e7a97e9d169f08d35304bef58773801fd3", "parents": [ "807249ac31664a7e2cd75b5db0476d6153bfbe99" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Jul 13 20:13:14 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 13 19:04:27 2012 -0700" }, "message": "power: pm8921-bms: remove Dynamic Unusable Charge algorithm\n\nThe dynamic UUC algorithm changes the UUC as load, state of charge and\ntemperature changes. This uncontrolled behaviour causes unacceptable\njumps in state of charge numbers.\n\nReplace the dynamic UUC algorithm with a simple average current based\nUUC. The average current is calculated by remembering the load for last\nfew (16) samples. Also to maintain a reasonable UUC while charging, a\nload of 300mA is assumed.\n\nNote that the first time UUC is calculated we don\u0027t have load samples\nand in that case the instantaneous current is used.\n\nSince we now don\u0027t change the UUC with respect to max possible load\n(itest), the usage of this value is removed. Also instead of failure\nvoltage we introduce cutoff voltage which represents the loaded voltage\nby which the battery should be reported 0%.\n\nChange-Id: Ia640164ee2c9690537308d4e840953824ba15b58\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "b2680137d0dde7dca15179bcb272fa7f47ad7974", "tree": "fa41fcb3f29fe6fc885d4b506cedeb10eebc69ec", "parents": [ "cd73883b11609aea16ba54babef8a849e446e165" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue May 15 16:32:51 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 13 19:04:22 2012 -0700" }, "message": "power: pm8921-bms: dont use override mode if batfet is open\n\nIf the battery fet is open, the current sourced or sinked from the\nbattery is very low. There is a high chance that an open circuit\nvoltage(OCV) happens. Putting the BMS in override mode resets the timer\nwhose expiry causes an OCV.\n\nAvoid putting the BMS in override mode if battery fet is open.\n\nChange-Id: Idc463bcc55b51cf188cc8ee440a66f763654f174\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "725f849ff6e273e8bf5b818fdf53cee5290717af", "tree": "52b8ce10a3fff5fde270d8c5919be2e3cba770e6", "parents": [ "eb36ee3ea23a4cfc0bbf7289104bff881c516000" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Mon Aug 06 13:45:16 2012 -0700" }, "committer": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Wed Aug 08 09:54:15 2012 -0700" }, "message": "msm: wcd9xxx: add device tree support for codec slimbus component\n\nRead the codec specific data from device tree instead of board file.\n\nChange-Id: Iad382b89692903d2434b63d34c7121fe0b4b9dda\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "11aeb7b101ccbb4dc077aaa910fe2f5b37d28dec", "tree": "4b50a88e63f6d0b06a75dc72716734aa12324ab6", "parents": [ "ef034b21295af2200b33ddcc6833bed8266717e7" ], "author": { "name": "Ajay Dudani", "email": "adudani@codeaurora.org", "time": "Thu Jun 28 19:14:30 2012 -0700" }, "committer": { "name": "Android Partner Code Review", "email": "android-gerrit-partner@google.com", "time": "Mon Aug 06 19:42:57 2012 -0700" }, "message": "power: pm8921-charger: enable battery alarm\n\nDuring UVLO events the charger hardware may lock up\nif it is in hardware clock switching mode.\n\nTo fix this add a battery alarm with a lower threshold\nthat disables hardware clock switching.\n\nWhen the system is awake the resume callback ensures\nthat the charger is running off of the 19.2 MhZ clock\nwhich does not allow the charger to lock up. Therefore\nif the battery alarm wakes up the device before hitting\nUVLO the charger hardware will not be in hardware clock\nswitching mode.\n\nCRs-Fixed: 374607\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\nSigned-off-by: Ajay Dudani \u003cadudani@codeaurora.org\u003e\n\nChange-Id: I1bb20b2e7ff1a11f032b12b4abd4804ed130fe4a\n" }, { "commit": "2e656596a489a42e0a630ec764a233bdd20a5d5f", "tree": "f09cf0ad6878f0fdcd28828d90e1a4d36ef584a3", "parents": [ "ff9c112790835cb7514044f8a9154227fbc073d0", "a717211c063ece07bcfd15aad4ed8856293bc446" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Aug 06 12:34:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Aug 06 12:34:07 2012 -0700" }, "message": "Merge \"ASoC: wcd9xxx: Add wcd9320 codec slimbus slave support\" into msm-3.4" }, { "commit": "0f0df2f5a2df9fde7a07d6d27ccf4c619e5bf925", "tree": "50090fd1a3effe8a6a6a29e05d9d33976ecc1dcf", "parents": [ "05fb865d7c58f2a8cb09ebe88c0af5e86c5edcf8", "4181239136b9fb0b2c000fbff691f361dc9d48e5" ], "author": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 23:30:40 2012 -0700" }, "committer": { "name": "Brian Muramatsu", "email": "btmura@google.com", "time": "Wed Aug 01 23:30:40 2012 -0700" }, "message": "Merge branch \u0027caf\u0027 into android-msm-mako-3.4-wip\n\n* caf: (219 commits)\n usb: msm_otg: Fix error handling bug in driver probe\n bluetooth: Add support for LE conn param\n msm: ocmem: Initialize the ocmem graphics mPU\n msm: ocmem: Add support for low power clients\n msm-fb: display: Tearing issue during video playback\n ASoC: WCD9304: Fix register sequence for analog mic recording\n msm: clock-8974: Correct some audio interface clock structures.\n ASoC: wcd9310: Clear the status only for active slimbus ports\n msm: kgsl: Allow non-default timeout values in adreno_idle\n msm: cache_erp: Add device tree support\n ASOC: msm: Add device tree specific changes in compressed driver\n drivers: leds-pm8xxx: enable low power mode for RGB LED\n msm: 8974: Add function to reserve memory from device tree\n msm: clock-8974: Add block reset support for the USB cores\n msm_fb: display: Brightness change observed when switching HDMI on\n msm: mpq8064: Dummy read to prevent false interrupt from triggering\n mmc: msm_sdcc: Enable AUTO_PROG_DONE for CMD25\n msm: rpm: remove the sanity check in rpm log\n msm: camera: Add some minor code fixes.\n msm: Always compile acpuclock-krait when CONFIG_ARCH_MSM_KRAIT is set\n ...\n\nConflicts:\n\tarch/arm/mach-msm/clock-8960.c\n\tarch/arm/mach-msm/subsystem_restart.c\n\tdrivers/media/video/msm/msm_camirq_router.c\n\tdrivers/media/video/msm/msm_mctl.c\n\tdrivers/usb/gadget/f_mass_storage.c\n\tdrivers/video/msm/msm_fb.c\n\tsound/soc/msm/apq8064.c\n" }, { "commit": "a717211c063ece07bcfd15aad4ed8856293bc446", "tree": "9521727e187c7f8c8fcce7528f495515a24ffda5", "parents": [ "4d9199e25ce829f93ec51b0597375dd04d194936" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon Jul 23 16:03:49 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Wed Aug 01 15:38:56 2012 -0700" }, "message": "ASoC: wcd9xxx: Add wcd9320 codec slimbus slave support\n\nUpdate slimbus slave driver to use updated address depending on discovered\nThe wcd9320 Taiko codec introduced a new register address map to configure\nslimbus slave device.\n\nChange-Id: I41e9ebabd1d375a1904b6033e46736b2fb6365f9\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "5bed4f18e0e701e0f6e6cdc6e111896ae5a49ee8", "tree": "79e33e5e88e198288077043e8214eef3cd44ed44", "parents": [ "4d9199e25ce829f93ec51b0597375dd04d194936" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri May 25 18:04:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Aug 01 14:25:42 2012 -0700" }, "message": "power: pm8921-charger: add dc_unplug_check option\n\nAdd a configuration option to enable or disable\nthe reverse boost fix for the DC charging path.\n\nSome board designs do not utilize the DC_IN path\non the PMIC, however they do use the presence\ndetection of DC_IN to enable the auto switching\nand interrupt features. In these particular configurations\nthe PMIC does not control the DC OVP FETs.\nHence add an option to enable or disable the DC path workaround\nand leave the workaround disabled by default.\n\nChange-Id: I1e55bbfe37c7cc6f62581af11280a565ed648c06\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "1ff608a341b87defa586ca4a24d0bd89abfdfbb3", "tree": "1248e822037b521c5c22568d8bfa0fc3c9509470", "parents": [ "0f40bd55ffc47d867c9fb326b4ad5408d064e292" ], "author": { "name": "kyungtae.oh", "email": "kyungtae.oh@lge.com", "time": "Thu Jul 19 14:31:54 2012 +0900" }, "committer": { "name": "kyungtae.oh", "email": "kyungtae.oh@lge.com", "time": "Tue Jul 24 14:58:52 2012 +0900" }, "message": "power: add wirelesscharger(WLC) bq51051b driver\n\nChange-Id: I61c4b9c3d648e8f709ec78708271f807ceed1715\n" }, { "commit": "4de1af2ad1184b95c443ce597801060d8090c5f9", "tree": "d32d467844ece171b883c281c02eefca094fd065", "parents": [ "5edb82d40aac6d59a5c55867a3085acb8a76c808", "6dd4cb52650b8c522ef09bb39c4aa83a791e209d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 18 09:38:51 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jul 18 09:38:51 2012 -0700" }, "message": "Merge \"mfd: wcd9xxx: use codec device id to register the device.\" into msm-3.4" }, { "commit": "fa51cd052516bd0d6e42b28a3401dec9ed6d7262", "tree": "dd206b6f0bbdc54d4eca47f2a3aa641beab72f4a", "parents": [ "23c508a09d3413df25d3b2ca08994155a5eb5049", "2bf044d74e1f30762b9a69ac87ee2e7da4b2f564" ], "author": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Tue Jul 17 04:38:43 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Tue Jul 17 04:38:43 2012 -0700" }, "message": "Merge remote-tracking branch \u0027coreaurora.org/msm-3.4\u0027 into android-msm-mako-3.4-wip\n\nConflicts:\n\tarch/arm/mach-msm/clock-8960.c\n\tdrivers/media/video/msm/msm.h\n\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n" }, { "commit": "049898d4214f87e40d45559e45d0166c0dcf249e", "tree": "4808d457d19a936619f5ea0bb5eee85c0b655d34", "parents": [ "d2be52627d0c3ef08c9027cbcbdfa3b9e493e384", "6ccbf1321c92ba7dc19f4d686c1a74b473f73e91" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 12 03:42:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 12 03:42:37 2012 -0700" }, "message": "Merge changes I23a48cd4,I9b4259b4 into msm-3.4\n\n* changes:\n power: pm8921-charger: add reverse boost fix for dc_in\n power: pm8921-charger: add UVD threshold API\n" }, { "commit": "15dbeaa554acf8c87d1b53f3e12a16d1e8bffb20", "tree": "cdabbecd3c24deb8c6166f7053818b34b4a55a0d", "parents": [ "4d70252374fdad219ce7dbf78b474bd57f8ff98c" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Tue Jun 26 12:53:07 2012 -0700" }, "committer": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Wed Jul 11 12:29:42 2012 -0700" }, "message": "ASoC: WCD9xxx: Add Micbias capless mode to platform data\n\nMicrophone Bias may or may not have an external bypass capacitor\ndepending on the board configurations. Add the microphone bias\ncapless mode setting to the platform data for codec\n\nCRs-fixed: 363941\nChange-Id: Ia949d240b3b3122bc4bd6aca02ee5b6cd785d246\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "0789fc6a4d0daa810640aded1cae811cfbdebe9a", "tree": "a9d9ba9af46da6556bac48b43b40c270ab34d8ce", "parents": [ "c7bba2fa8156ad16484d336c7488e3e610212821" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Thu Jun 07 17:43:27 2012 -0700" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Wed Jul 11 10:30:40 2012 -0700" }, "message": "power: pm8921-charger: add UVD threshold API\n\nPM8917 has a new register which allows configuring\nthe falling USB under voltage detection (UVD) threshold\nfrom 3.85V to 4.35V in 100 mV steps.\n\nAdd an API that allows to set this value per default and\nalso only do this for PM8917 chips.\n\nChange-Id: I9b4259b43f148762ac72af40bdc79b895d9b4fc2\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "a735489959074882afb9a82ba63f6fa220c6d73d", "tree": "64f24e8aa698a4d950c87d481c2300cc47fc1f2b", "parents": [ "78f3492fe0f036f4ae49a009d3749e613f9191cf" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Mon May 28 12:49:01 2012 +0530" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Mon Jul 09 08:54:15 2012 +0530" }, "message": "ASoC: wcd9304: Fix IIR filter controls\n\nAdd IIR2 filter interface for the wcd9304 codec.\nControl the two 5 band IIR filters in the audio\ncodec through mixer controls. Enable individual\nIIR filter bands and set band coefficients.\n\nChange the IIR filter code to use snd_soc_write\ninstead of snd_soc_update_bits. If update bits\nis used the IIR registers may not be correctly\nupdated.\n\nChange-Id: I92fc147641e9eb270d8176f20445371fe5cc2f92\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "0c837eb12bbb59ff51c1a363625ec399b16efbbe", "tree": "f16df90c39e7da37197f4a089ff83f9ea918451a", "parents": [ "501307ff5097451570325829e77c7ad26b07c76b", "ebebc7081309d94bb5befecb0f58190d4fc4f0d2" ], "author": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Fri Jul 06 13:52:17 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Fri Jul 06 13:52:17 2012 -0700" }, "message": "Merge remote-tracking branch \u0027coreaurora.org/msm-3.4\u0027 into android-msm-mako-3.4-wip\n\nConflicts:\n\tdrivers/gpu/ion/ion_carveout_heap.c\n\tdrivers/gpu/ion/ion_cp_heap.c\n\tdrivers/gpu/ion/ion_iommu_heap.c\n\tdrivers/gpu/ion/ion_system_heap.c\n\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n" }, { "commit": "6dd4cb52650b8c522ef09bb39c4aa83a791e209d", "tree": "a199fba4cef061f3d0542b609b3a6ec3fe4c6833", "parents": [ "ebebc7081309d94bb5befecb0f58190d4fc4f0d2" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Thu Jul 05 19:47:42 2012 +0530" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Thu Jul 05 23:09:28 2012 +0530" }, "message": "mfd: wcd9xxx: use codec device id to register the device.\n\nThe current code registers multiple devices for i2c clients. This\nresults in code repetition. instead its better to register single\ni2c client and register codec based on device id.\n\nChange-Id: Ifb4adbd47b7a2bf7d32be637fd0641545cd84286\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "c0b58c817674c493ae2ee64b39882e27a671a6e7", "tree": "0e3495768e35a3a19369796ab02b7222c1cf5cf2", "parents": [ "c877935bbf0de12029d645f187b64d3bf6fa3c5f", "d1af26b2d9cbcb90249f348fa895d7669ef27c41" ], "author": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Tue Jul 03 10:22:56 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Tue Jul 03 10:22:56 2012 -0700" }, "message": "Merge remote-tracking branch \u0027coreaurora.org/msm-3.4\u0027 into android-msm-mako-3.4-wip\n" }, { "commit": "748e710ed0fcb347e8c0b63607a20b8d951e5fa1", "tree": "2fd06f5fd8819cc0db7ced6626c495107558b3a8", "parents": [ "e8f865eea0ba93cbe3183c443f98c07c8f41b1cd", "305c529189ab0adfbefec1ff03f246a8b7471244" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 22:59:33 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 22:59:33 2012 -0700" }, "message": "Merge \"power: pm8xxx-ccadc: remove support for pm8921 v1.0 and v1.1\" into msm-3.4" }, { "commit": "0004ba495a41fa86e533e2e1c8a39e2c0cbec1cc", "tree": "03cdbb8dd9eea2d39d68e38c2f56685bf8164e7d", "parents": [ "119c37c394c6f49ca853d41a4c0dada5e709e048", "c445c30e1ad245cfd9abe64bb80b863162469435" ], "author": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Mon Jul 02 17:32:36 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Mon Jul 02 17:32:36 2012 -0700" }, "message": "Merge remote-tracking branch \u0027coreaurora.org/msm-3.4\u0027 into android-msm-mako-3.4-wip\n\nConflicts:\n\tarch/arm/mach-msm/clock-8960.c\n\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n" }, { "commit": "54bb81e600f02cd5c4b90dc332142982aa26e648", "tree": "7c6753f0434dfc8ea55f20b36adef7b6a616ebbb", "parents": [ "30980aaafd42c71628c76ebf8ababf2361fa5951", "ed2d87e6e9d8c83a6261767ceb60ccefb783bf10" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 04:49:41 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 04:49:41 2012 -0700" }, "message": "Merge \"power: pm8921-bms: remember soc between restarts\" into msm-3.4" }, { "commit": "305c529189ab0adfbefec1ff03f246a8b7471244", "tree": "58b2527daa07416d66d515afdf65307021ab0cce", "parents": [ "a4a52a46b49d22f08c3b996d513bac3e7e2e861e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jun 21 16:15:43 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Jun 29 09:57:11 2012 -0700" }, "message": "power: pm8xxx-ccadc: remove support for pm8921 v1.0 and v1.1\n\nThis ccadc module is reused in multiple pmics. It is now unnecessary\nto check for 8921 versions in the driver. As a result of this change\nolder 8921 versions are not supported.\n\nCRs-Fixed: 372679\nChange-Id: I2114f9428e2ba1a29c2bc9caaaa75106caf1dfc3\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "9627b3dd1b50d3079e5a8d7d9712444442411096", "tree": "eb2e916488b25812b088f21530188f3b3ca431ea", "parents": [ "ba0e94576be8fcd9386e49f10f84fc671560abea" ], "author": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Thu Jun 21 14:23:53 2012 -0700" }, "committer": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Thu Jun 28 21:09:29 2012 -0700" }, "message": "cradle: add hall ic driver\n\nsupport hall ic (BU52031NVX) for cradle\n\nChange-Id: I1de44a0c1d5ab1359fc1a02eb674b08be8590100\n" }, { "commit": "2aa4c04acd71981890316d00402dc353c8a2bb7e", "tree": "9ad25491e5f429dc0339a0ed93f85f7d0524c3a0", "parents": [ "39c6c645e779aedc0268dd07013672c0884d3562" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Tue Jun 26 13:08:45 2012 -0700" }, "committer": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Thu Jun 28 18:06:20 2012 -0700" }, "message": "ASoC: Handle slimbus port disconnection before opening another\n\nProblem Description:\nOpen and close the same set of slimbus ports after\ncertain iterations will fail port open, as that port\nwas not disconnected successfully.\n\nFix Description:\nHandle sequence of closing slimbus ports. Store\nthe channel masks associated with each codec dai\nand reset them after they are closed from slimbus\nThen, release the close slimbus port event, after\nall the channels are closed completely\n\nChange-Id: Ie14b9f0920b37f905151b48f18df181503acc21d\nCRs-fixed: 370761\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "6381ae7bba52db99284cccdc9a9efbcf69388930", "tree": "e431c028200c2c4933b1e14c204a693a4d883567", "parents": [ "89443dc3f74ff0e45a4c1fee096d576a082bef69", "c432fdf28656051f358ff4b7cc41f43d4eeb3ed8" ], "author": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Thu Jun 28 17:56:11 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Thu Jun 28 17:56:11 2012 -0700" }, "message": "Merge remote-tracking branch \u0027coreaurora.org/msm-3.4\u0027 into android-msm-mako-3.4-wip\n\nConflicts:\n\tdrivers/video/msm/mdp.h\n\tsound/soc/msm/apq8064.c\n\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n" }, { "commit": "ed2d87e6e9d8c83a6261767ceb60ccefb783bf10", "tree": "093ffaf265c48aef1472a3c180b1e117c5d5d404", "parents": [ "c432fdf28656051f358ff4b7cc41f43d4eeb3ed8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jun 26 20:15:36 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jun 28 11:55:06 2012 -0700" }, "message": "power: pm8921-bms: remember soc between restarts\n\nCurrently the code does not have a mechanism to remember the soc\nreported just before shutting down and upon restarting the new\nsoc reported is off from the previous soc value reported.\n\nThis change introduces\n- a method to save soc in an unused coincell back register: ssbi address\n 0x107 is not used on 8921 and serves the purpose of storing the soc.\n The driver reads this value and uses it to scale the reported soc.\n- a method to detect that a battery was removed and perhaps replaced by a\n different one. If the battery is found replaced the driver is notified\n of the change and it disregards the soc value it read from the backup\n register. The charger driver has a battery backed bit (force vref\n therm) which it sets in its initialization sequence. Once set the\n value remains between restarts, unless the battery is removed. The\n default value of this bit is 0. Hence if a zero is detected before\n writing to it, battery was removed between restarts - this mechanism\n is used to notify the BMS to disregard the soc read from the backup\n register.\n\nNote that for this to work correctly the bootloader needs to be updated to\nnot overwrite register 0x107 upon restart.\n\nCRs-Fixed: 370287\nChange-Id: If7d098552d36eb27a396ee7d37f78d3629861f6e\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "c67677a527c401bff5fd67a98fabbfaf8e912a4e", "tree": "6ba333d6551e448f3f69f65c43b6ff730513e51c", "parents": [ "1d98ed58e6548ec755de7233c8e9cc4be80343a2", "eff4bd5e4dc92ed0245d2083f75810d15fb436d8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jun 23 04:18:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jun 23 04:18:26 2012 -0700" }, "message": "Merge \"mfd: pm8038-core: Add support for PMIC thermal alarm\" into msm-3.4" }, { "commit": "1a749b700752efcc8d832f7b83554df2771dce53", "tree": "cb237ee534b42f12f86a787be47adaf5c8cbed24", "parents": [ "1c068327f72c00a63adaf6ab06cc7707563e530e" ], "author": { "name": "roy.park", "email": "roy.park@lge.com", "time": "Mon Jun 18 22:49:20 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Fri Jun 22 10:45:28 2012 -0700" }, "message": "power: support LGE battery 2100mAh\n\nAdd battery 2100mAh profile and update Battery mornitoring system(BMS)\n\nChange-Id: Iea118f1665241c7e4192a77db791b80426a01b60\n" }, { "commit": "eff4bd5e4dc92ed0245d2083f75810d15fb436d8", "tree": "80d3726f94c463d1185443c3631f9de3aa977e51", "parents": [ "cdb31565a7ea6f5792c25b6d2152a87e7e8e60e5" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Jun 21 15:31:13 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Jun 21 16:00:37 2012 -0700" }, "message": "mfd: pm8038-core: Add support for PMIC thermal alarm\n\nAdd pm8xxx-tm subdevice into pm8038-core. The pm8xxx-tm device\ncan be used to access the real-time PMIC die temperature. It\ncan also be used to trigger an interrupt when critical\ntemperature thresholds are reached.\n\nChange-Id: I4b8bda1d51cafaa6b77408da4c183bdb2dc4327a\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "3c3788281e7979d1cb36f9424fe9c5c4806d916f", "tree": "af97c322083744643096a042feb8c648ec523563", "parents": [ "626583b0a5f91afea8125ad1644a93b02c8bd3e7" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Thu Jun 07 13:43:22 2012 -0700" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Tue Jun 19 10:57:02 2012 -0700" }, "message": "power: bms/ccadc: move ccadc calibration to ccadc driver\n\nThere is a dependency for the CCADC calibration work on the BMS\ndriver. This prevents some devices that do not use the BMS\nto utilize the CCADC.\n\nRemove this dependency by moving the ccadc calibration\nwork to the CCADC driver to avoid this.\n\nChange-Id: If43c781d6d2bc27f64dbbe594b6e81c5a5642f0b\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "c3b2440f90170806ce3247d1a6bb981918416d74", "tree": "8ba05b5946d90472ae2161975df44679e81568c3", "parents": [ "c6a4ccdbeb4184b79e5f1ca3f68a19cacdcf8d59" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Mon Jun 11 00:05:59 2012 -0700" }, "committer": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Mon Jun 18 09:44:34 2012 -0700" }, "message": "ASoC: wcd9320: Add intial driver for WCD9320 codec\n\nThe WCD9320 Codec Driver is an ALSA-compliant codec driver. This driver\nconstructs the internal codec audio paths with DAPM widgets and\ncontrols and provides the controls to the upper layers to enable and\nconfigure audio paths.\n\nChange-Id: Iee29359bebfc838cd200732b7191a2eb6a2087ee\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "75c34ca1b4e69e96921e4153dfa9d399e5b9d2e8", "tree": "c60ce27bf268851b5d22ae40dddd83462c532b83", "parents": [ "fef39d45c2c879b3104436573bef1eaa963adc08", "25dad72ab532f1ed4466b6684012f1c55acddb93" ], "author": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Tue Jun 12 14:27:40 2012 -0700" }, "committer": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Tue Jun 12 14:28:21 2012 -0700" }, "message": "Merge remote branch \u0027origin/msm-3.0\u0027 into msm-3.4\n\n* origin/msm-3.0: (87 commits)\n Revert \"msm: kgsl: Add VBIF error detection\"\n tspp: 8960: adding TSPP driver for 8960\n board-8960: Merge secure and non secure firmware heaps.\n msm: msm_dsps: Move to the new clk_prepare/unprepare API.\n diag: Protect SMD channel from getting NULL value\n camera: Mercury hardware JPEG decoder driver support.\n msm: 8064-regulator: Remove 5V FRC gpio external regulator\n diag: Respond to Get Subsystem Mask request\n Revert \"msm_fb: display: Attach and detach MDP IOMMU on suspend/resume\"\n Revert \"msm_fb: display: Add MDP IOMMU detach support for DTV\"\n msm: rpm-8930: Fix incorrect RPM enumeration and DMM\n msm: board-8930: Configure GPU turbo clock to 400MHz\n usb: mdm_bridge: Fix bug in handling error condition\n msm: vidc: Invalidate the cache before processing metadata.\n video: msm: wfd: Add turbo mode support\n tty: n_smux: Add Dedicated Power Control Queue\n defconfig: msm-copper: Enable SPI ethernet support\n msm: acpuclock-8960: Add PVS support on 8064\n ASoC: mdm9615: Set correct GPIOs for AUX PCM\n msm: 9615: Add auxpcm support over secondary audio interface\n ...\n\nConflicts:\n\tarch/arm/configs/msm-copper_defconfig\n\tdrivers/char/diag/diagchar_core.c\n\tdrivers/char/diag/diagfwd_hsic.h\n\tdrivers/media/video/msm/msm_camera.c\n\tdrivers/media/video/msm/msm_mctl.c\n\tdrivers/mfd/Kconfig\n\tdrivers/mfd/Makefile\n\tdrivers/mfd/wcd9xxx-slimslave.c\n\tdrivers/spmi/spmi.c\n\tdrivers/tty/n_smux.c\n\tdrivers/usb/otg/msm_otg.c\n\tsound/soc/msm/msm-pcm-routing.h\n\nSigned-off-by: Steve Muckle \u003csmuckle@codeaurora.org\u003e\nChange-Id: I49d4ceff17714a7ba51243de63f27b7e78647bda\n" }, { "commit": "df82121f1d3d4c9b4aeadcc754fd1660b84ee50f", "tree": "e4ab620e449081e544ed57d03c8dc7db20056681", "parents": [ "9e3cbf7ac473773f582f3a41d3619736c9e1c1d4" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Jun 07 15:37:58 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Jun 08 10:34:25 2012 -0700" }, "message": "mfd: PM8821: Update IRQ configuration data\n\nUpdate the IRQ related configuration data for PM8821\nIRQ controller. Replace the IRQ related APIs from PM8xxx\nwith PM8821 specific ones because PM8XXX IRQ driver\ndoes not handle IRQ controller in PM8821 chip.\n\nChange-Id: I55133ecb272cb64e69bc65a06efd7d552f563699\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "9e3cbf7ac473773f582f3a41d3619736c9e1c1d4", "tree": "bf32a56c0b7ef38c4690b17e97aa540e09bacc54", "parents": [ "5a63263528abf4167204201b87ab41b7227a9e2b" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri May 25 13:00:28 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Jun 08 10:34:25 2012 -0700" }, "message": "mfd: PM8821: Add support for PM8821 IRQ controller\n\nAdd support for the irq controller in Qualcomm PM8821 pmic. The\ninterrupt controller provides control for MPPs configured as\ninterrupts in addition to other subdevice interrupts.\n\nThe PM8821 IRQ controller is simpler than Secure IRQ controller\nin other PMIC4 family of chips, i.e. PM8921. Also, it does not adhere\nto SSBI register layout of Secure IRQ controller. This driver follows\nthe SSBI register layout of PM8821 IRQ controller and supports only\nPM8821 IRQ controller.\n\nThe interrupt controller also provides a way to read the real time\nstatus of an interrupt. This real time status is the only way one\ncan get the input values of gpio and mpp lines.\n\nCRs-Fixed: 366276\nChange-Id: Id4b9cbf42f296c26d4f8780590389bb2265e46c0\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "5a63263528abf4167204201b87ab41b7227a9e2b", "tree": "0055679d3eedce8024460ed3644eab8874a80825", "parents": [ "3e22fe443b858f645ebdecae60c8306e11a0084d" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Jun 07 15:35:52 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Jun 08 10:34:24 2012 -0700" }, "message": "mfd: pm8xxx: Update voltage levels of PM8821 MPPs\n\nAmend the the value of 1.8V voltage level macro of\nPM8821 MPP to reflect to correct settings specified\nin the PM8821 objective spec document.\n\nChange-Id: I950235ea0bff50a7078e47c926eb8c0b2e0a9d7c\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "2fcabf92eea31cad2ec4852dcab563f2c93e4294", "tree": "ace0dbe60c1b7fd0f18fb0394b93c436d355f2c7", "parents": [ "3f4bac202b1c826de3ca9fe599e46f045e04147b" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Wed May 30 10:41:11 2012 -0700" }, "committer": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Wed Jun 06 18:52:57 2012 -0700" }, "message": "msm: Replace idle wakelocks with pm_qos\n\nIdle wakelocks are being removed so replace them with pm_qos.\nSince we don\u0027t know every driver\u0027s latency requirements we\nmaintain one-to-one compatabilty with the idle wakelock API by\nreplacing the wakelock with a pm_qos request of the correct\nlatency.\n\nOnce we determine the actual latency requirements of each driver\nwe can replace the latency used with the correct latency for the\ndevice.\n\nChange-Id: Icc40f1642218e0de8fc2f56eaf9e8f92914d142f\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "f132c6cf77251e011e1dad0ec88c0b1fda16d5aa", "tree": "f04b469a3547a19b7bdbe110adc571eb71c93328", "parents": [ "23016defd7db701a01dc49f972ad6b1bae9651c2", "3f6240f3e4e2608caf1a70d614ada658cbcbe7be" ], "author": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Wed Jun 06 18:30:57 2012 -0700" }, "committer": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Wed Jun 06 18:45:28 2012 -0700" }, "message": "Merge commit \u0027AU_LINUX_ANDROID_ICS.04.00.04.00.126\u0027 into msm-3.4\n\nAU_LINUX_ANDROID_ICS.04.00.04.00.126 from msm-3.0.\nFirst parent is from google/android-3.4.\n\n* commit \u0027AU_LINUX_ANDROID_ICS.04.00.04.00.126\u0027: (8712 commits)\n PRNG: Device tree entry for qrng device.\n vidc:1080p: Set video core timeout value for Thumbnail mode\n msm: sps: improve the debugging support in SPS driver\n board-8064 msm: Overlap secure and non secure video firmware heaps.\n msm: clock: Add handoff ops for 7x30 and copper XO clocks\n msm_fb: display: Wait for external vsync before DTV IOMMU unmap\n msm: Fix ciruclar dependency in debug UART settings\n msm: gdsc: Add GDSC regulator driver for msm-copper\n defconfig: Enable Mobicore Driver.\n mobicore: Add mobicore driver.\n mobicore: rename variable to lower case.\n mobicore: rename folder.\n mobicore: add makefiles\n mobicore: initial import of kernel driver\n ASoC: msm: Add SLIMBUS_2_RX CPU DAI\n board-8064-gpio: Update FUNC for EPM SPI CS\n msm_fb: display: Remove chicken bit config during video playback\n mmc: msm_sdcc: enable the sanitize capability\n msm-fb: display: lm2 writeback support on mpq platfroms\n msm_fb: display: Disable LVDS phy \u0026 pll during panel off\n ...\n\nSigned-off-by: Steve Muckle \u003csmuckle@codeaurora.org\u003e\n" }, { "commit": "2e1d752be81c1eee283738ffa21afb179ae1cc1d", "tree": "8bb63cf1404aadbffc3905454e6a1fbd433635c2", "parents": [ "a3fe8df5d61bf52c971da8731ba536773c26c86d" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Fri May 25 15:08:40 2012 +0530" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Tue May 29 11:18:05 2012 +0530" }, "message": "ASoC: wcd9304: Fix wrong sample rate issue in RX2/RX3 channels\n\nThe default value of RX2/3_B5_CTL is wrong and resulting in wrong\nsample rate playback for headphone.\n\nChange-Id: Idf7d9bce1ee344677c48353fb3fe6a8f8bcc42ab\nCRs-Fixed: 361414\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "83c81f62fa5a0ae50f30300474a46315f322d37b", "tree": "5265a8dc4e96ef43e9e230afee8904a975e1854f", "parents": [ "c3f3b0321016480b66def830deff50cc21a67910" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri May 18 16:09:05 2012 -0700" }, "committer": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Thu May 24 18:17:15 2012 -0700" }, "message": "ASoC: MSM: Add Support for WCD9304 codec version 1.1\n\nRegister and initialize the approriate device for WCD9304 codec\nversion 1.0 and version 1.1. Query version information from codec\nto be used from other drivers.\n\nChange-Id: I64c2dfe2dfc786c6b799f4698c1a36f52115880a\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "ba4ea6eccabe48e04a43f5f0da17a33743b24e89", "tree": "61f06bcd094dbf1c288ad8afa184c97d4b592b4a", "parents": [ "78468e8392a8d5766516a45b6f1c74cba0046283" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed May 09 15:59:28 2012 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon May 14 08:09:50 2012 +0530" }, "message": "mfd: pm8xxx-misc: Add API to control HSED BIAS lines\n\nQualcomm PMIC\u0027s support 3 HSED BIAS lines which as used\nas Micrphone bias. The API adds ability to control (enable/disable)\nthese bias lines.\n\nCRs-Fixed: 359206\nChange-Id: If7603028bb040c3679c042307b8950bbd3f12c4d\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "7cb31935eac24648db4facfbe91afb53cfae3063", "tree": "3ebbbca21b8a2c9a53c4ef2434b6f0e3ea792be1", "parents": [ "2c653ad630abce4b447292fbfb20d48c2136a13d", "c579020876e8546210cda68fe5863858072cf40c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 12 11:58:02 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 12 11:58:02 2012 -0700" }, "message": "Merge \"mfd: PM8018: Add GPIO digital voltage level definitions\" into msm-3.0" }, { "commit": "0d2eb0004f90e7e80286b7fc6ebd285d76af1bbb", "tree": "74bf2e83a7c3d75a60d684f9cc4dce702bd7ee3b", "parents": [ "bf6596c458d98fecd232f05ba239d1d14ee5f285", "dfe0f57f55b1028bd8f60e5ff02fda1e819f37ce" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 07 06:53:36 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 07 06:53:36 2012 -0700" }, "message": "Merge \"mfd: pm8038-core: Add support for speaker power amps on pmic 8038\" into msm-3.0" }, { "commit": "aa34315f87cf9181cab4b11aa6563fae654c61f3", "tree": "58d5420be534777ae7b5ff1eb9708a8924634559", "parents": [ "e9449a1e67164050f0b4bc165ee583490388b46a", "656b7a293b0427dd3091ad27b0869c7f5b2465ba" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 07 06:53:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 07 06:53:26 2012 -0700" }, "message": "Merge \"mfd: pm8xxx-spk: Add support for class D speaker amplifier driver\" into msm-3.0" }, { "commit": "38549c20e7b26cb0e94704c1f69f62000402d679", "tree": "c5724cee875789e8b7b337564d28e823520e0eec", "parents": [ "e377c9810a607309128dccff9ffbd11d3c3ea597", "e88f2466eb23260a2ab68b285215074c2d4eb37d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 03 00:49:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 03 00:49:37 2012 -0700" }, "message": "Merge changes Icf6ec2fa,I9c09bc82 into msm-3.0\n\n* changes:\n power: pm8921-bms: enable/disable FCC learning feature\n power: pm8921-bms: fix shutting down early at cold temperature\n" }, { "commit": "e88f2466eb23260a2ab68b285215074c2d4eb37d", "tree": "3376f13fef312c0a4836ab3b94e6127448cbad41", "parents": [ "b40b96f5c993a602e6a8d035dd815ddd57057915" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Apr 25 18:22:38 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed May 02 09:55:30 2012 -0700" }, "message": "power: pm8921-bms: enable/disable FCC learning feature\n\nThere are some configurations which do not want battery full charge\ncapacity (FCC) learning.\n\nProvide means to enable/disable the FCC learning feature.\n\nChange-Id: Icf6ec2fac867d62c3c1eeb882d66d57523312b5b\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "2776af1ee46a732b4392119a8291656d015368e3", "tree": "34a0b7ba94a923dd0f341e00a32e45fa61f8ce34", "parents": [ "db4bc8162185a65f71d7a144d1d1db7c97b94d47" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri Apr 27 16:59:39 2012 -0700" }, "committer": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri Apr 27 18:08:11 2012 -0700" }, "message": "ASoC: WCD9304: Fix register defaults for clock select\n\nOn any codec path bringup and teardown, the external clock\ngate in digital block is not required to be changed.\nFix by setting the register value as default and not change\nduring bringup or teardown\n\nChange-Id: Ie2c57cc9814f5e85bcc755679a29ed36d7f199a6\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "c579020876e8546210cda68fe5863858072cf40c", "tree": "4e4d6d745acc5a7120a8cf4f9bd5c8966b3c34f6", "parents": [ "8a5e928f3d3d4c937f6faa2896668a2168dbdc38" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Apr 26 15:24:11 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Apr 26 15:55:50 2012 -0700" }, "message": "mfd: PM8018: Add GPIO digital voltage level definitions\n\nPM8018 GPIOs need default voltage level to initialize.\nThe voltage level is used during the defalut configuration\nsetup during boot up and at any time when gpio needs to be\nreconfigured.\n\nAdd these voltage level definitions so that they can be used\nfor such PM8018 GPIO voltage level configuration.\n\nChange-Id: Ifc5e77e976826e3493a972f9b0f6a412709acb33\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "f9383d55837549e405479abbd7457b07b24b083b", "tree": "60e6016c1ffcecafaaac47e3b0a1a176ea5d41b2", "parents": [ "8a5e928f3d3d4c937f6faa2896668a2168dbdc38" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Apr 19 09:42:49 2012 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Apr 26 14:46:50 2012 -0700" }, "message": "hwmon: pm8xxx-adc: Add BATT_ID_THERM configuration\n\nPM8018 ADC arbiter uses a single AMUX8 channel to\nread either battery id or battery tempertaure. On\nexisting platforms these pins are grounded.\n\nAdd default configuration to read battery ID. If clients\nneed to read the battery temperature instead, follow the\ninstructions in the comments for the ADC channel listing.\nClients would need to update the scaling function in the\nchannel configuration to use the appropriate battery\nthermistor scaling function.\n\nCRs-Fixed: 350907\nChange-Id: Ia3a8054c9be1e90d2076fd583ef8480353b78c6d\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "1ba115da95497e6aec86600709b51db2679094fd", "tree": "61aeed603c9e3d93d0f3bad3f2694bef2055f7bd", "parents": [ "eac0d1edf21ab5a46867fbfea5af621227738083" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Apr 19 15:42:41 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Apr 23 15:48:32 2012 -0700" }, "message": "mfd: PM8018/PM8921: Update PMIC board revision information\n\nTo incorporate the release of new revisions of the PM8921\nand PM8018, add the new revision numbers to the database.\n\nChange-Id: I5073802131aeed51795df77ac065878eeff34461\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "dfe0f57f55b1028bd8f60e5ff02fda1e819f37ce", "tree": "523e5dce29595a6236dc9a91103980a6e06efbf8", "parents": [ "656b7a293b0427dd3091ad27b0869c7f5b2465ba" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Mon Mar 19 02:45:03 2012 -0700" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Wed Apr 18 07:27:29 2012 +0530" }, "message": "mfd: pm8038-core: Add support for speaker power amps on pmic 8038\n\nAdd speaker amps as a sub device to pmic 8038. This will also\ntake care of filling platform data for speaker driver\nwhich comes as part of pmic pdata.\n\nChange-Id: Id5c163389e99153336536e364ef116d9b90752e2\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "656b7a293b0427dd3091ad27b0869c7f5b2465ba", "tree": "d39cf0443dcb8e1739fe55a818de6307e8f1cda2", "parents": [ "545341ab72fdadf781fe9cd1c66110dc9cbfa960" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Thu Mar 15 00:27:42 2012 -0700" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Wed Apr 18 07:27:22 2012 +0530" }, "message": "mfd: pm8xxx-spk: Add support for class D speaker amplifier driver\n\nThe driver adds support for configuring the following parameters for\nexternal pmic speaker amp driver\n1. Gain\n2. Mute/Unmute\n3. Speaker enable/Disable\nThe above operations are supported by driver by exported apis\nfrom kernel space.The Machine driver from ALSA would use these\nto configure speaker.\n\nChange-Id: I9817f5d5c2952ca423b84f35162a842123e4d413\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "82ea267f7dc853a5e6a724916a70a10656efdfc2", "tree": "74a0377dbdfc759f813f2ac5d0bef4c5727a0765", "parents": [ "02269ab10f1130d35dc35db72ab026d16ba31abf" ], "author": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Mon Apr 16 21:24:32 2012 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Mon Apr 16 21:27:07 2012 +0200" }, "message": "mfd: Fix modular builds of rc5t583 regulator support\n\nThe combination of commit 1b1247dd75aa5cf5fae54a3bec7280046e9c7957\n\n \"mfd: Add support for RICOH PMIC RC5T583\"\n\nand commit 6ffc3270210efa2bea526953a142ffc908f5bd86\n\n \"regulator: Add support for RICOH PMIC RC5T583 regulator\"\n\nare causing the i386 allmodconfig builds to fail with this:\n\n ERROR: \"rc5t583_update\" [drivers/regulator/rc5t583-regulator.ko] undefined!\n ERROR: \"rc5t583_set_bits\" [drivers/regulator/rc5t583-regulator.ko] undefined!\n ERROR: \"rc5t583_clear_bits\" [drivers/regulator/rc5t583-regulator.ko] undefined!\n ERROR: \"rc5t583_read\" [drivers/regulator/rc5t583-regulator.ko] undefined!\n\nand this:\n\n ERROR: \"rc5t583_ext_power_req_config\" [drivers/regulator/rc5t583-regulator.ko] undefined!\n\nFor the 1st four, make the simple ops static inline, instead of\npolluting the namespace with trivial exports. For the last one,\nadd an EXPORT_SYMBOL.\n\nSigned-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "f868a1fcd6ecfe243a8e489693e1a0972217fc57", "tree": "1f499a55ed1fadccfad855ea67f2551fb73582e5", "parents": [ "d7e20e2a2de58254a9f6dd11e3e9b9622bda38c3" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Mon Mar 05 10:07:44 2012 -0800" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Tue Apr 17 00:46:40 2012 +0530" }, "message": "ASoC: wcd9304: Pull in pending fixes for sitar.\n\nFix Lineout and DMIC configurations. The configurations are similar\nto tabla codec driver and hence pull in changes to sitar driver.\n\nChange-Id: Ia00359e6f8888c08365b85423197821fc16f963b\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "d7e20e2a2de58254a9f6dd11e3e9b9622bda38c3", "tree": "59a62e203f350d0862b1907ae9aeb91c1a0e4b8b", "parents": [ "0f916abba2146de1c03a098be1c89094df7fe485", "ded189bb51de5b214a159c3f67c21f58c00bda3a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Apr 16 09:34:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Apr 16 09:34:09 2012 -0700" }, "message": "Merge changes Ic67b798a,I0f2b440b,Iffb6a7c8 into msm-3.0\n\n* changes:\n power: pm8921-bms: account for capacitive drop\n power: pm8921-bms: Add connector resistance\n power: pm8921-bms: fix the units of batt_temp for rbatt\n" }, { "commit": "8eaeb9393397be8eb700ab38a69c450975463b77", "tree": "1f6b9d8d8197b16c19ed0ed03d55886e0c519ba5", "parents": [ "4accdff7a3e397b43e50f605ee561ba7994745c7" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Tue Apr 03 11:56:51 2012 +0300" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Mon Apr 16 16:45:34 2012 +0200" }, "message": "mfd: Convert twl6040 to i2c driver, and separate it from twl core\n\nComplete the separation of the twl6040 from the twl core since\nit is a separate chip, not part of the twl6030 PMIC.\n\nMake the needed Kconfig changes for the depending drivers at the\nsame time to avoid breaking the kernel build (vibra, ASoC components).\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nReviewed-by: Mark Brown \u003cbroonie@opensource.wolfsonicro.com\u003e\nAcked-by: Tony Lindgren \u003ctony@atomide.com\u003e\nAcked-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "4accdff7a3e397b43e50f605ee561ba7994745c7", "tree": "2d47d3fdb69cf2cc01298331cbb883a62bb6674a", "parents": [ "e816b57a337ea3b755de72bec38c10c864f23015" ], "author": { "name": "Daniel Lezcano", "email": "daniel.lezcano@linaro.org", "time": "Mon Apr 02 17:55:48 2012 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Mon Apr 16 16:42:43 2012 +0200" }, "message": "mfd : Fix dbx500 compilation error\n\nThe ux500 default config enables the db5500 and the db8500.\nThe incoming cpuidle driver uses the \u0027prcmu_enable_wakeups\u0027\nand the \u0027prcmu_set_power_state\u0027 functions but these ones\nare defined but not implemented for the db5500, leading to\nan unresolved symbol error at link time. In order to compile,\nwe have to disable the db5500 support which is not acceptable\nfor the default config.\n\nI noticed there are also some other functions which are\ndefined but not implemented.\n\nThis patch fix this by removing the functions definitions\nand move out of the config section the empty functions which\nare normally used when the DB550 config is disabled.\nOnly the functions which are not implemented are concerned\nby this modification.\n\nSigned-off-by: Daniel Lezcano \u003cdaniel.lezcano@linaro.org\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "ded189bb51de5b214a159c3f67c21f58c00bda3a", "tree": "eb283bc5429b5b4683260ee96d751e0a8423167d", "parents": [ "baffba4e76513ce9add79071382dbc9c91d7bba2" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Mar 30 10:12:28 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Apr 13 01:00:00 2012 -0700" }, "message": "power: pm8921-bms: account for capacitive drop\n\nAs the battery discharges, we need to account for the voltage drop across\ncapacitance in the battery. This voltage drop can be simulated using\na resistance in series with the battery such that it increases as state of\ncharge of the battery decreases.\n\nAdd parameter to account for this resistance in the profile tables.\n\nChange-Id: Ic67b798ae8f480d8f42d9321e3847c4294bf7db3\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "baffba4e76513ce9add79071382dbc9c91d7bba2", "tree": "38fa981c46612c6112f0e68fe4f03042834077d0", "parents": [ "12a891c4e875c136ebeebd0f1510cf0d2e4195d1" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Mar 22 14:41:10 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Apr 13 00:59:59 2012 -0700" }, "message": "power: pm8921-bms: Add connector resistance\n\nThe current software does not take in to account the resistance\nintroduced because of the battery connectors and rsense. This\nneeds to be accounted for when the battery resistance is\ncalculated.\n\nChange-Id: I0f2b440bae8168868b26f35c8ec59a21d4906f0f\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "bb1ed5ec370e48381270238ee1563bc7daa6578b", "tree": "2235ff95e238e0e4a32c3a8051932f7c52ee7126", "parents": [ "932410e2e01c52108e6d8e1df3b6c3db135f3205", "f6fdcaa0ca320e7b8c19e5edd343629c94e9cdb0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:18 2012 -0700" }, "message": "Merge \"power: pm8921-bms: scale rbatt with temperature and soc\" into msm-3.0" }, { "commit": "d83cad4f0b98c783634a90835755ea55e6679279", "tree": "f0b4711e763b176d6d8f8716a4136eb81f7c7400", "parents": [ "e288a9f4773fb4f0bba72a1de9f0266ea45e4f5e", "135f3e094ea59c05802389c3b7ecc27074f9209c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:37 2012 -0700" }, "message": "Merge changes Idd7662db,I1fbefb35 into msm-3.0\n\n* changes:\n mfd: pm8xxx-misc: Make pm8xxx_preload_dVdd a no-op for PM8901 rev 2.3\n mfd: pmic8901: Add revision ID values for PM8901 rev 2.2 and 2.3\n" }, { "commit": "cf491a6d6a0f89a6020547d799bc2656c4993e99", "tree": "76f3607d1cc80d590d428aae6dd2c6ccf60ad72d", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e", "aae56f94a1e1409a5bdaf15860dc0c9924679425" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:25 2012 -0700" }, "message": "Merge \"pm8xxx: misc: correct typo for aux clock division\" into msm-3.0" }, { "commit": "e41d1db1e9e96a1f7b6eecbe9b84cc1092ce3f81", "tree": "5c9ce5d601fd2c9a2f97179785803ecdbcc5d4d0", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 10:08:10 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 11:21:30 2012 -0700" }, "message": "mfd: pmic8901: Add revision ID values for PM8901 rev 2.2 and 2.3\n\nAdd revision ID values to identify PM8901 rev 2.2 and rev 2.3.\nAlso modify the version printing in the pmic8901 driver to utilize\na human readable format.\n\nChange-Id: I1fbefb35584ec19dfe0983eaff3c5192f1762392\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "aae56f94a1e1409a5bdaf15860dc0c9924679425", "tree": "f9d5b45a95ece165b364cc50761629e45ef23731", "parents": [ "d487812cb7bb16bd4260d9505dc697d001afe24a" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Apr 04 11:07:43 2012 -0700" }, "committer": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Apr 04 11:12:05 2012 -0700" }, "message": "pm8xxx: misc: correct typo for aux clock division\n\nTypo where 0 should be O in \"XO\"\n\nChange-Id: I23320a360e62e3027f79fffcabd0a7b4c7f2904c\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "f6fdcaa0ca320e7b8c19e5edd343629c94e9cdb0", "tree": "e565a3825871c18a66de826497cddb02f9a9275f", "parents": [ "26417da62764b0acdd5d5b9bc9237a024d10fad8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Feb 27 00:10:10 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Mar 30 16:37:33 2012 -0700" }, "message": "power: pm8921-bms: scale rbatt with temperature and soc\n\nThe rbatt was observed to change with battery temperature and the state\nof charge of the battery. Update the BMS driver and the battery data\nto include and use a rbatt table indicating its changes w.r.t temperature\nand state of charge.\n\nOn similar lines provide api for other systems to query battery resistance.\n\nChange-Id: I681675db537b70919e6e0437bd400ce53bf97096\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "919c840167ec93167e00ca817aa4627170419ebf", "tree": "5162f6a39541f609a949c5d75c4fdaed523d20af", "parents": [ "a9d38a4f2da6c49a257253a9fdef7a6bcb0e0e4f", "5cdd4d7fa5424f2018193a0c2af3bef9036c973e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Mar 30 16:09:02 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Mar 30 16:09:02 2012 -0700" }, "message": "Merge tag \u0027for-v3.4-rc1\u0027 of git://git.infradead.org/battery-2.6\n\nPull battery updates from Anton Vorontsov:\n \"Various small bugfixes and enhancements, plus two new drivers:\n - A quite complex ab8500 charger driver, submitted by Arun Murthy @\n ST-Ericsson;\n - Summit Microelectronics SMB347 Battery Charger, submitted by Bruce\n E Robertson and Alan Cox @ Intel.\n\n And that\u0027s all.\"\n\n* tag \u0027for-v3.4-rc1\u0027 of git://git.infradead.org/battery-2.6: (36 commits)\n max17042_battery: Clean up interrupt handling\n Revert \"max8998_charger: Include linux/module.h just once\"\n ab8500_fg: Fix some build warnings on x86_64\n max17042_battery: Fix CHARGE_FULL representation.\n max8998_charger: Include linux/module.h just once\n power_supply: Convert i2c drivers to module_i2c_driver\n lp8727_charger: Add MODULE_DEVICE_TABLE\n charger-manager: Simplify charger_get_property(), get rid of a warning\n charger-manager: Clean up for better readability\n da9052-battery: Convert to use module_platform_driver\n da9052-battery: Fix a memory leak when unload the module\n da9052-battery: Add missing platform_set_drvdata\n ab8500: Turn unneeded global symbols into local ones\n ab8500_fg: Fix copy-paste error\n ab8500_fg: Get rid of \u0027struct battery_type\u0027\n ab8500_fg: Get rid of \u0027struct v_to_cap\u0027\n ab8500_btemp: Get rid of \u0027enum adc_therm\u0027\n ab8500_charger: Convert to the new USB OTG calls\n ab8500-btemp: AB8500 battery temperature driver\n ab8500-fg: A8500 fuel gauge driver\n ...\n" }, { "commit": "2e5bbd87af6e20b39c09da6f8bb94d7f6f7d5105", "tree": "a0dd15c41ebc8519f802ffac9c79de145c8c9669", "parents": [ "3eff85619c3bdf125aa22c3e54accf39ef946345", "74730c7d870da7be00b94e17f3b46a538005c078" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 29 14:17:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 29 14:17:01 2012 -0700" }, "message": "Merge changes I3984d747,I9a436f63 into msm-3.0\n\n* changes:\n msm: board-8930-pmic: Add default configuration for LED anode power source\n power: pm8921-charger: Add feature to use charger LED\n" }, { "commit": "b5174fa3a7f4f8f150bfa3b917c92608953dfa0f", "tree": "5efd32dd52fe55f760094e78f18acd3ff869751d", "parents": [ "afb9bd704c7116076879352a2cc2c43aa12c1e14", "135111cc5595c6a24dd826d503e2d2bae92da1c4" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 28 20:59:45 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 28 20:59:45 2012 -0700" }, "message": "Merge tag \u0027mmc-merge-for-3.4-rc1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc\n\nPull MMC updates from Chris Ball:\n\nCore:\n * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices\n that support Data Tag will provide increased throughput for metadata.\n * Faster detection of card removal on I/O errors.\n\nDrivers:\n * dw_mmc now supports eMMC Power Off Notify, has PCI support, and\n implements pre_req and post_req for asynchronous requests.\n * omap_hsmmc now supports device tree.\n * esdhc now has power management support.\n * sdhci-tegra now supports Tegra30 devices.\n * sdhci-spear now supports hibernation.\n * tmio_mmc now supports using a GPIO for card detection.\n * Intel PCH now supports 8-bit bus transfers.\n\n* tag \u0027mmc-merge-for-3.4-rc1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)\n mmc: sh_mmcif: simplify bitmask macros\n mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug\n mmc: sh_mobile_sdhi: add a callback for board specific init code\n mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function\n mmc: sh_mobile_sdhi: do not manage PM clocks manually\n mmc: tmio_mmc: remove unused sdio_irq_enabled flag\n mmc: tmio_mmc: power status flag doesn\u0027t have to be exposed in platform data\n mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC\n mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper\n mmc: tmio: calculate the native hotplug condition only once\n mmc: simplify mmc_cd_gpio_request() by removing two parameters\n mmc: sdhci-pci: allow 8-bit bus width for Intel PCH\n mmc: sdhci: check interrupt flags in ISR again\n mmc: sdhci-pci: Add MSI support\n mmc: core: warn when card doesn\u0027t support HPI\n mmc: davinci: Poll status for small size transfers\n mmc: davinci: Eliminate spurious interrupts\n mmc: omap_hsmmc: Avoid a regulator voltage change with dt\n mmc: omap_hsmmc: Convert hsmmc driver to use device tree\n mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO\n ...\n" }, { "commit": "7bf97e1d5a94b6a71815771bb9452fc2c022c966", "tree": "f89082dbd33a51a79c9a9c0dddb29e2b11b8207e", "parents": [ "30304e5a79d424eb2c8707b3ff0e9b8bf6ab3e8f", "c77c8a6fd3d57b586ff5ecb5ab5b32ca4f54fe75" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 28 14:08:46 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 28 14:08:46 2012 -0700" }, "message": "Merge tag \u0027gpio-for-linus\u0027 of git://git.secretlab.ca/git/linux-2.6\n\nPull GPIO changes for v3.4 from Grant Likely:\n \"Primarily gpio device driver changes with some minor side effects\n under arch/arm and arch/x86. Also includes a few core changes such as\n explicitly supporting (electrical) open source and open drain outputs\n and some help for parsing gpio devicetree properties.\"\n\nFix up context conflict due to Laxman Dewangan adding sleep control for\nthe tps65910 driver separately for gpio\u0027s and regulators.\n\n* tag \u0027gpio-for-linus\u0027 of git://git.secretlab.ca/git/linux-2.6: (34 commits)\n gpio/ep93xx: Remove unused inline function and useless pr_err message\n gpio/sodaville: Mark broken due to core irqdomain migration\n gpio/omap: fix redundant decoding of gpio offset\n gpio/omap: fix incorrect update to context.irqenable1\n gpio/omap: fix incorrect context restore logic in omap_gpio_runtime_*\n gpio/omap: fix missing dataout context save in _set_gpio_dataout_reg\n gpio/omap: fix _set_gpio_irqenable implementation\n gpio/omap: fix trigger type to unsigned\n gpio/omap: fix wakeup_en register update in _set_gpio_wakeup()\n gpio: tegra: tegra_gpio_config shouldn\u0027t be __init\n gpio/davinci: fix enabling unbanked GPIO IRQs\n gpio/davinci: fix oops on unbanked gpio irq request\n gpio/omap: Fix section warning for omap_mpuio_alloc_gc()\n ARM: tegra: export tegra_gpio_{en,dis}able\n gpio/gpio-stmpe: Fix the value returned by _get_value routine\n Documentation/gpio.txt: Explain expected pinctrl interaction\n GPIO: LPC32xx: Add output reading to GPO P3\n GPIO: LPC32xx: Fix missing bit selection mask\n gpio/omap: fix wakeups on level-triggered GPIOs\n gpio/omap: Fix IRQ handling for SPARSE_IRQ\n ...\n" }, { "commit": "30304e5a79d424eb2c8707b3ff0e9b8bf6ab3e8f", "tree": "63968fb97b86861e31922515395feef8a110f884", "parents": [ "750f77064a290beb162352077b52c61b04bcae0e", "b8589e2a8065b8e7773742b60ae96b63b757bb69" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 28 13:56:35 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 28 13:56:35 2012 -0700" }, "message": "Merge tag \u0027mfd_3.4-1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\nPull MFD changes from Samuel Ortiz:\n - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh\u0027s RC5T583 and\n TI\u0027s TPS65090 and TPS65217.\n - New variants support (8420, 8520 ab9540), cleanups and bug fixes for\n the abx500 and db8500 ST-E chipsets.\n - Some minor fixes and update for the wm8994 from Mark.\n - The beginning of a long term TWL cleanup effort coming from the TI\n folks.\n - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997\n drivers.\n\nFix up trivial conflicts due to duplicate patches and header file\ncleanups (\u003clinux/device.h\u003e removal etc).\n\n* tag \u0027mfd_3.4-1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)\n gpio/twl: Add DT support to gpio-twl4030 driver\n gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support\n mfd: Detach twl6040 from the pmic mfd driver\n mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups\n mfd: Micro-optimization on twl4030 IRQ handler\n mfd: Make twl4030 SIH SPARSE_IRQ capable\n mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files\n mfd: Remove references already defineid in header file from twl-core\n mfd: Remove unneeded header from twl-core\n mfd: Make twl-core not depend on pdata-\u003eirq_base/end\n ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files\n mfd: Return twl6030_mmc_card_detect IRQ for board setup\n Revert \"mfd: Add platform data for MAX8997 haptic driver\"\n mfd: Add support for TPS65090\n mfd: Add some da9052-i2c section annotations\n mfd: Build rtc5t583 only if I2C config is selected to y.\n mfd: Add anatop mfd driver\n mfd: Fix compilation error in tps65910.h\n mfd: Add 8420 variant to db8500-prcmu\n mfd: Add 8520 PRCMU variant to db8500-prcmu\n ...\n" }, { "commit": "d7cf2e931cea51c7ff0a40e6b930edf99b320d8e", "tree": "d8040df3feeffd18876a6a59ec92cae1a7f1e50d", "parents": [ "ad7787fa78c87368f413a30debb0e1e1fdb25b0c" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon Mar 19 19:38:23 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Tue Mar 27 18:21:44 2012 -0700" }, "message": "ASoC: wcd9310: Add plug detection through mechanical switch\n\nUse mechanical switch on the phone jack to detect headset/headphone\ninsertion and removal. Mechanical switch is beneficial to avoid fake\nbutton press and high impedance microphone headset detection.\n\nCRs-fixed: 341402\nChange-Id: Idffba14316ab25e07736d1b7385f0edb16216089\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "9e4db1c3eed55c22328d8022c2c80adb3093833f", "tree": "9643545e6bd182f1d3e19942f590a6a1e3198320", "parents": [ "de8856d2c11f562c60ed9340a83db4a4f829a6e6", "aae528d9a8ad79d4b21b1b723abc9447fdb0d200" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 27 18:17:02 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 27 18:17:02 2012 -0700" }, "message": "Merge branch \u0027platforms\u0027 of git://git.linaro.org/people/rmk/linux-arm\n\nPull ARM platform updates from Russell King:\n \"This covers platform stuff for platforms I have a direct interest in\n (iow, I have the hardware). Essentially:\n - as we no longer support any other Acorn platforms other than RiscPC\n anymore, we can collect all that code into mach-rpc.\n - convert Acorn expansion card stuff to use IRQ allocation functions,\n and get rid of NO_IRQ from there.\n - cleanups to the ebsa110 platform to move some private stuff out of\n its header files.\n - large amount of SA11x0 updates:\n - conversion of private DMA implementation to DMA engine support\n (this actually gives us greater flexibility in drivers over the old\n API.)\n - re-worked ucb1x00 updates - convert to genirq, remove sa11x0\n dependencies, fix various minor issues\n - move platform specific sa11x0 framebuffer data into platform files\n in arch/arm instead of keeping this in the driver itself\n - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA\n for SIR transmissions as well as FIR\n - rework sa1111 support for genirq, and irq allocation\n - fix sa1111 IRQ support so it works again\n - use sparse IRQ support\n\n After this, I have one more pull request remaining from my current\n set, which I think is going to be the most problematical as it\n generates 8 conflicts.\"\n\nFixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per\nRussell.\n\n* \u0027platforms\u0027 of git://git.linaro.org/people/rmk/linux-arm: (125 commits)\n ARM: 7343/1: sa11x0: convert to sparse IRQ\n ARM: 7342/2: sa1100: prepare for sparse irq conversion\n ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq\n ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h\n ARM: sa11x0: remove unused DMA controller definitions\n ARM: sa11x0: remove old SoC private DMA driver\n USB: sa1111: add hcd .reset method\n USB: sa1111: add OHCI shutdown methods\n USB: sa1111: reorganize ohci-sa1111.c\n USB: sa1111: get rid of nasty printk(KERN_DEBUG \"%s: ...\", __FILE__)\n USB: sa1111: sparse and checkpatch cleanups\n ARM: sa11x0: don\u0027t static map sa1111\n ARM: sa1111: use dev_err() rather than printk()\n ARM: sa1111: cleanup sub-device registration and unregistration\n ARM: sa1111: only setup DMA for DMA capable devices\n ARM: sa1111: register sa1111 devices with dmabounce in bus notifier\n ARM: sa1111: move USB interface register definitions to ohci-sa1111.c\n ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c\n ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c\n ARM: sa1111: delete unused physical GPIO register definitions\n ...\n" }, { "commit": "c391e1b9ebfe31514fa95a0cdd30c2cbc9652c89", "tree": "a126e9621172ead9bede04f2413fa79ffd3871d2", "parents": [ "58126c878b4a4f658015e383614bafb6331e46d3" ], "author": { "name": "Guennadi Liakhovetski", "email": "g.liakhovetski@gmx.de", "time": "Thu Feb 09 22:57:13 2012 +0100" }, "committer": { "name": "Chris Ball", "email": "cjb@laptop.org", "time": "Tue Mar 27 12:20:16 2012 -0400" }, "message": "mmc: tmio_mmc: power status flag doesn\u0027t have to be exposed in platform data\n\nThe controller power status flag does not have to be accessed from the\nhot-plug detection code any more, it can now be removed from the platform\ndata and put in the controller private struct.\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n" }, { "commit": "c8be24c2afd3ed2445bbf8f542af35a9787fc0e8", "tree": "e0e757bb3b6a45f55eef145484ca5707d9e45fa8", "parents": [ "2b1ac5c2caccbfd43bd616321cbbe21eb33c7879" ], "author": { "name": "Guennadi Liakhovetski", "email": "g.liakhovetski@gmx.de", "time": "Thu Feb 09 22:57:09 2012 +0100" }, "committer": { "name": "Chris Ball", "email": "cjb@laptop.org", "time": "Tue Mar 27 12:20:15 2012 -0400" }, "message": "mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper\n\nIf the platform specifies the TMIO_MMC_HAS_COLD_CD flag, use the generic\nMMC GPIO card hotplug helper.\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n" }, { "commit": "d674a5186034805f94e2077c9a3c7068d50769dd", "tree": "84f5f38105772303cfc3d7f04514462a011b5f73", "parents": [ "9eb1d41c6b571cdfea8177c490cfb297ae362f65" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Mar 15 14:06:04 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Mar 26 11:31:04 2012 -0700" }, "message": "power: pm8921-charger: Add feature to use charger LED\n\nAdd a mechanism to configure the power source of\nthe charger indicator LED anode on the PM8921.\nThe configuration is specified using platform data.\n\nChange-Id: I9a436f634ddfd5d1822f1fc8beab4936fa8bb61d\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "c34a61b4e7a9966edc0e87d7b0a12fbb8cc58168", "tree": "1c347755b106d0b6663caf9447b3b3d35ce6ff84", "parents": [ "450ceb2b23ed0feba8c1238f52a1d3feacd5379d" ], "author": { "name": "Anton Vorontsov", "email": "anton.vorontsov@linaro.org", "time": "Wed Mar 14 04:39:01 2012 +0400" }, "committer": { "name": "Anton Vorontsov", "email": "anton.vorontsov@linaro.org", "time": "Mon Mar 26 20:41:11 2012 +0400" }, "message": "ab8500_fg: Get rid of \u0027struct battery_type\u0027\n\nThe struct is duplicated, plus causes the following flood:\n\n CC drivers/power/ab8500_fg.o\nab8500_fg.c: In function ‘ab8500_fg_get_ext_psy_data’:\nb8500_fg.c:2081:8: warning: assignment from incompatible pointer type [enabled by default]\n\nSigned-off-by: Anton Vorontsov \u003canton.vorontsov@linaro.org\u003e\n" }, { "commit": "450ceb2b23ed0feba8c1238f52a1d3feacd5379d", "tree": "47749b9fe2189e7f1a8d18653db6eedd43a51e5c", "parents": [ "d329129e9e10e3089550fd9bd692f67687503136" ], "author": { "name": "Anton Vorontsov", "email": "anton.vorontsov@linaro.org", "time": "Wed Mar 14 04:38:32 2012 +0400" }, "committer": { "name": "Anton Vorontsov", "email": "anton.vorontsov@linaro.org", "time": "Mon Mar 26 20:41:10 2012 +0400" }, "message": "ab8500_fg: Get rid of \u0027struct v_to_cap\u0027\n\nThe struct is duplicated, plus when used it causes the following\nwarnings:\n\n CHECK drivers/power/ab8500_fg.c\nab8500_fg.c:818:13: warning: incorrect type in assignment (different base types)\nab8500_fg.c:818:13: expected struct v_to_cap *tbl\nab8500_fg.c:818:13: got struct abx500_v_to_cap *const v_to_cap_tbl\n CC drivers/power/ab8500_fg.o\nab8500_fg.c: In function \u0027ab8500_fg_volt_to_capacity\u0027:\nab8500_fg.c:818:6: warning: assignment from incompatible pointer type [enabled by default]\n\nSigned-off-by: Anton Vorontsov \u003canton.vorontsov@linaro.org\u003e\n" }, { "commit": "d329129e9e10e3089550fd9bd692f67687503136", "tree": "5bb28bac5bdaa5b42a518ed6a246697cf5a983c6", "parents": [ "efd71c89a411d72f1e20d91e34f0779e0e0019b4" ], "author": { "name": "Anton Vorontsov", "email": "anton.vorontsov@linaro.org", "time": "Wed Mar 14 04:27:20 2012 +0400" }, "committer": { "name": "Anton Vorontsov", "email": "anton.vorontsov@linaro.org", "time": "Mon Mar 26 20:41:09 2012 +0400" }, "message": "ab8500_btemp: Get rid of \u0027enum adc_therm\u0027\n\nThis is the same as abx500_adc_therm, but when the former is used,\nthe following warning flood pops up:\n\ndrivers/power/ab8500_btemp.c: In function \u0027ab8500_btemp_batctrl_volt_to_res\u0027:\nab8500_btemp.c:150:25: warning: comparison between \u0027enum abx500_adc_therm\u0027 and \u0027enum adc_therm\u0027 [-Wenum-compare]\nab8500_btemp.c: In function \u0027ab8500_btemp_curr_source_enable\u0027:\nab8500_btemp.c:212:25: warning: comparison between \u0027enum abx500_adc_therm\u0027 and \u0027enum adc_therm\u0027 [-Wenum-compare]\nab8500_btemp.c:244:32: warning: comparison between \u0027enum abx500_adc_therm\u0027 and \u0027enum adc_therm\u0027 [-Wenum-compare]\nab8500_btemp.c: In function \u0027ab8500_btemp_measure_temp\u0027:\nab8500_btemp.c:462:25: warning: comparison between \u0027enum abx500_adc_therm\u0027 and \u0027enum adc_therm\u0027 [-Wenum-compare]\nab8500_btemp.c: In function \u0027ab8500_btemp_id\u0027:\nab8500_btemp.c:528:121: warning: comparison between \u0027enum abx500_adc_therm\u0027 and \u0027enum adc_therm\u0027 [-Wenum-compare]\nab8500_btemp.c:551:25: warning: comparison between \u0027enum abx500_adc_therm\u0027 and \u0027enum adc_therm\u0027 [-Wenum-compare]\n\nThis patch fixes the issue by switching the driver to use more\nnamespace-friendly enum.\n\nSigned-off-by: Anton Vorontsov \u003canton.vorontsov@linaro.org\u003e\n" }, { "commit": "84edbeeab67c1575067335179513150115da367b", "tree": "58730cc0d097cdb8c5970973437289f9868cfc53", "parents": [ "1668f81159fb72eda2114a9c73a64ffee045cb01" ], "author": { "name": "Arun Murthy", "email": "arun.murthy@stericsson.com", "time": "Wed Feb 29 21:54:26 2012 +0530" }, "committer": { "name": "Anton Vorontsov", "email": "anton.vorontsov@linaro.org", "time": "Mon Mar 26 20:41:04 2012 +0400" }, "message": "ab8500-charger: AB8500 charger driver\n\nThis driver is responsible for detecting the ac/usb plugin and also includes\nfunction to enable ac/usb charging and re-kick the watchdog.\nIt registers with the power supply class and provides information to the user\nspace. The information include status of ac/usb charger device.\nThis information in turn will be used by the abx500 charging algorithm driver\nto enable/disable and monitor charging.\n\nSigned-off-by: Arun Murthy \u003carun.murthy@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Anton Vorontsov \u003canton.vorontsov@linaro.org\u003e\n" }, { "commit": "1668f81159fb72eda2114a9c73a64ffee045cb01", "tree": "c93f2386110dd43f57d27343bec461f75fd31321", "parents": [ "ed1a230f96eb4610f1f4296b8c3c067389ddf540" ], "author": { "name": "Arun Murthy", "email": "arun.murthy@stericsson.com", "time": "Wed Feb 29 21:54:25 2012 +0530" }, "committer": { "name": "Anton Vorontsov", "email": "anton.vorontsov@linaro.org", "time": "Mon Mar 26 20:41:02 2012 +0400" }, "message": "abx500-chargalg: Add abx500 charging algorithm\n\nThis is a charging algorithm driver for abx500 variants. It is the central\nentity for battery driver and is responsible for charging and monitoring\nthe battery driver. It is a hardware independant driver and also monitors\nother abx500 power supply devices.\n\nSigned-off-by: Arun Murthy \u003carun.murthy@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Anton Vorontsov \u003canton.vorontsov@linaro.org\u003e\n" }, { "commit": "7256ecc2b7b91b4212ccc5511cb12254bdf806d0", "tree": "1a39b3de03cfc92c5b5dedfb01174d17b49df18a", "parents": [ "18bbff9f679cd470db66402fdb9c577b34324183", "6ed3e2acc7995625625592abe8cd3383c34a471b" ], "author": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sun Mar 25 23:56:30 2012 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sun Mar 25 23:57:10 2012 +0100" }, "message": "Merge branch \u0027sa11x0-mcp\u0027 into sa11x0\n\nConflicts:\n\tarch/arm/mach-sa1100/assabet.c\n\tarch/arm/mach-sa1100/collie.c\n\tarch/arm/mach-sa1100/generic.c\n\tarch/arm/mach-sa1100/lart.c\n\tarch/arm/mach-sa1100/shannon.c\n" }, { "commit": "d3e0aab89fa66640f5f712c2545088d4326d945e", "tree": "3ae662c832b7a029be1a95e8e5cdf86fde1d5c79", "parents": [ "de63ad6cb4e02094817641a8a3b6073eb37437ca", "cb6d300f6c6d6fd5c6407689af4d41680788352a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Mar 25 00:56:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Mar 25 00:56:45 2012 -0700" }, "message": "Merge \"hwmon: pm8xxx-adc: Fix Buffer overflow\" into msm-3.0" }, { "commit": "250f6715a4112d6686670c5a62ceb9305da94616", "tree": "ee1c9b41ed1fed8174efb312421902f19c877e8c", "parents": [ "11bcb32848ddb5ab28f09f142b625e2ba4d55c4c", "313162d0b83836e2f57e51b9b8650fb4b9c396ea" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 24 10:41:37 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 24 10:41:37 2012 -0700" }, "message": "Merge tag \u0027device-for-3.4\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux\n\nPull \u003clinux/device.h\u003e avoidance patches from Paul Gortmaker:\n \"Nearly every subsystem has some kind of header with a proto like:\n\n\tvoid foo(struct device *dev);\n\n and yet there is no reason for most of these guys to care about the\n sub fields within the device struct. This allows us to significantly\n reduce the scope of headers including headers. For this instance, a\n reduction of about 40% is achieved by replacing the include with the\n simple fact that the device is some kind of a struct.\n\n Unlike the much larger module.h cleanup, this one is simply two\n commits. One to fix the implicit \u003clinux/device.h\u003e users, and then one\n to delete the device.h includes from the linux/include/ dir wherever\n possible.\"\n\n* tag \u0027device-for-3.4\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:\n device.h: audit and cleanup users in main include dir\n device.h: cleanup users outside of linux/include (C files)\n" }, { "commit": "cb6d300f6c6d6fd5c6407689af4d41680788352a", "tree": "6b024957257b03cfae0a25b64af5f0894e7cd3bd", "parents": [ "f1d53c43022bdd9b00580689a1ea71490841a934" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Mar 15 10:44:11 2012 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Mar 22 22:01:42 2012 -0700" }, "message": "hwmon: pm8xxx-adc: Fix Buffer overflow\n\nUse the maximum number of channels added in the\nADC entry list in the board to check for channel\nvalidity. This patch also adds additional checks\nin the driver to validate the requested channel.\n\nCRs-Fixed: 339631\nChange-Id: I347f0d39a00b6ee12976ec2c24843626b54617d4\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "7bfe0e66d5da32961f0060fc5d96b739b1ed64b9", "tree": "6d5dcf77248b574bb0c50930bbf9030aafb99fce", "parents": [ "6a76a6992341faab0ef31e7d97000e0cf336d0ba", "10ce3cc919f50c2043b41ca968b43c26a3672600" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Mar 22 20:20:18 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Mar 22 20:20:18 2012 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\nPull input subsystem updates from Dmitry Torokhov:\n \"- we finally merged driver for USB version of Synaptics touchpads\n (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);\n\n - a bunch of new drivers for embedded platforms (Cypress\n touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x\n touchscreens, TI touchscreen);\n\n - input core allows clients to specify desired clock source for\n timestamps on input events (EVIOCSCLOCKID ioctl);\n\n - input core allows querying state of all MT slots for given event\n code via EVIOCGMTSLOTS ioctl;\n\n - various driver fixes and improvements.\"\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)\n Input: ili210x - add support for Ilitek ILI210x based touchscreens\n Input: altera_ps2 - use of_match_ptr()\n Input: synaptics_usb - switch to module_usb_driver()\n Input: convert I2C drivers to use module_i2c_driver()\n Input: convert SPI drivers to use module_spi_driver()\n Input: omap4-keypad - move platform_data to \u003clinux/platform_data\u003e\n Input: kxtj9 - who_am_i check value and initial data rate fixes\n Input: add driver support for MAX8997-haptic\n Input: tegra-kbc - revise device tree support\n Input: of_keymap - add device tree bindings for simple key matrices\n Input: wacom - fix physical size calculation for 3rd-gen Bamboo\n Input: twl4030-vibra - really switch from #if to #ifdef\n Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible\n Input: max8925_onkey - avoid accessing input device too early\n Input: max8925_onkey - allow to be used as a wakeup source\n Input: atmel-wm97xx - convert to dev_pm_ops\n Input: atmel-wm97xx - set driver owner\n Input: add cyttsp touchscreen maintainer entry\n Input: cyttsp - remove useless checks in cyttsp_probe()\n Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037\n ...\n" } ], "next": "f241e160314a8201b116b934bc4e107ff32e6f30" }