)]}' { "log": [ { "commit": "4dc83dfd3efa015628ebaa7245d342c8d5ca0298", "tree": "86baea1567da2c4796fbe0208704b10bdfaa7d1b", "parents": [ "493d3971a65c921fad5c3369c7582214c91c965a" ], "author": { "name": "Frank Blaschka", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:53 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "if_ether: add new Ethernet Protocol ID for af_iucv\n\nAdd a new ethertype for af_iucv over s/390 HiperSockets transport. Since\nHiperSockets is not a real ethernet hw this is not an officially registered ID.\n\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "493d3971a65c921fad5c3369c7582214c91c965a", "tree": "92e11e5fcdaf79772f39f8aac5efb2649671da1e", "parents": [ "6fcd61f7bf5d56a83cbf26c14915138d1a64ca4e" ], "author": { "name": "Ursula Braun", "email": "ursula.braun@de.ibm.com", "time": "Mon Aug 08 01:33:52 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "af_iucv: cleanup - use iucv_sk(sk) early\n\nCode cleanup making make use of local variable for struct iucv_sock.\n\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6fcd61f7bf5d56a83cbf26c14915138d1a64ca4e", "tree": "5efef0bc1c28fb5e9707bcab7bad9b9cd405ef3d", "parents": [ "c69748d1c9b5c2db8daae7a1eb55c46932e4376a" ], "author": { "name": "Frank Blaschka", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:51 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "af_iucv: use loadable iucv interface\n\nFor future af_iucv extensions the module should be able to run in LPAR\nmode too. For this we use the new dynamic loading iucv interface.\n\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c69748d1c9b5c2db8daae7a1eb55c46932e4376a", "tree": "1c5d5894093e8503cd730ac4b1cc938f98fd6e04", "parents": [ "96d042a68bc204c1d39abd71dcb29d9fcb1601ce" ], "author": { "name": "Ursula Braun", "email": "ursula.braun@de.ibm.com", "time": "Mon Aug 08 01:33:50 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "iucv: kernel option for z/VM IUCV and HiperSockets\n\nWhen adding HiperSockets transport to AF_IUCV Sockets, af_iucv either\ndepends on IUCV or QETH_L3 (or both). This patch introduces the\nnecessary changes for kernel configuration.\n\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "96d042a68bc204c1d39abd71dcb29d9fcb1601ce", "tree": "3d57c3b508d2d7b9a252ab4c04349b85c03876fc", "parents": [ "99558ea93ce885ab191df2bf8ef964880e3b34a7" ], "author": { "name": "Frank Blaschka", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:49 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:15 2011 -0700" }, "message": "iucv: introduce loadable iucv interface\n\nThis patch adds a symbol to dynamically load iucv functions.\n\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "99558ea93ce885ab191df2bf8ef964880e3b34a7", "tree": "269d366d8db7f974d27edd569f56c748cb095575", "parents": [ "1d31f52e38dfaf8bd07a6901c86fdd45e03eed24" ], "author": { "name": "Ursula Braun", "email": "ursula.braun@de.ibm.com", "time": "Mon Aug 08 01:33:48 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:15 2011 -0700" }, "message": "qeth: do not apply priority queuing to HiperSockets\n\nOSA cards can be configured to support 1 or 4 output queues. This\ndoes not apply to HiperSockets. This patch limits determination of\nthe configured number of output queues to OSA cards only, but excludes\nHiperSockets.\n\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1d31f52e38dfaf8bd07a6901c86fdd45e03eed24", "tree": "ca1cfde9baf6394a2fe61d5e3b172d8d8e3789d5", "parents": [ "f860b0522f65d3a0f8e6a4d908933737e1a82817" ], "author": { "name": "Frank Blaschka", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:47 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:15 2011 -0700" }, "message": "qeth: l3 ipv6 vlan not working on shared OSA chpid\n\nIn layer 3 mode IPv6 over VLAN does not work on newer OSA levels in\ncase the sender and receiver run on the same (shared) OSA adapter.\nKeep vlan info in the skb so the qdio header is filled with the\nrequired vlan tag.\n\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f860b0522f65d3a0f8e6a4d908933737e1a82817", "tree": "8002a666789db1196fd85df663d0fc4d8e852723", "parents": [ "531c4f896ca380812c22841e8ae396428a3327bf" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 25 04:19:17 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Aug 13 00:44:19 2011 -0700" }, "message": "drivers/net: Kconfig and Makefile cleanup\n\nAfter the move of the Ethernet drivers into drivers/net/ethernet/\nthere was some leftover cleanup to do in the Kconfig and Makefile.\n\nRemoved the 10/100, 1000, and 10GbE Kconfig menus.\n\nRemoved the out-dated pci-skeleton.c file which was used an\nexample driver. With the current networking features and\nstructure, the file is no longer a good example to use for\ndriver creation.\n\nCC: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "531c4f896ca380812c22841e8ae396428a3327bf", "tree": "321dfd12184406b18eb0154ff8a416f394352870", "parents": [ "cdd80bd4eece6109c15864e776b83c88c3bd891b" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Aug 13 00:37:14 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Aug 13 00:37:14 2011 -0700" }, "message": "acenic: Move the Alteon driver\n\nBased on feedback from Alan Cox, the acenic driver moved to\ndrivers/net/ethernet/alteon/ and made the necessary Kconfig and\nMakefile changes.\n\nCC: Jes Sorensen \u003cjes@trained-monkey.org\u003e\nCC: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "cdd80bd4eece6109c15864e776b83c88c3bd891b", "tree": "abad5f1ca9e1dc8752e2f7b58f471fcbea28b9d5", "parents": [ "59ffb30f7d43d4db2b2be165037a1a29d2011cdb" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 30 18:42:56 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:53 2011 -0700" }, "message": "tile: Move the Tilera driver\n\nMove the Tilera driver into drivers/net/ethernet/tile and\nmake the necessary Kconfig and Makefile changes.\n\nUpdated the Kconfig so that the options defualt to y if TILE kernel.\n\nCC: Chris Metcalf \u003ccmetcalf@tilera.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "59ffb30f7d43d4db2b2be165037a1a29d2011cdb", "tree": "39ba914f7d5c91110fc73b7bd49f02fb202d2588", "parents": [ "37b937575b5a93a8fcbd4e1d553415f99381f650" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 30 03:27:05 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:43 2011 -0700" }, "message": "xircom: Move the Xircom driver\n\nMove the Xircom driver into drivers/net/ethernet/xircom/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: \u003cpsheer@icon.co.za\u003e\nCC: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "37b937575b5a93a8fcbd4e1d553415f99381f650", "tree": "be31e45b7da810389b649eae242a0695f79cb743", "parents": [ "7191047028471c74808291d35dd0502cf73e4d2a" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 25 03:53:13 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:36 2011 -0700" }, "message": "sh_eth: Move the Renesas SuperH driver\n\nMove the Renesas driver into drivers/net/ethernet/renesas/ and make\nthe necessary Kconfig and Makefile changes.\n\nCC: Yoshihiro Shimoda \u003cyoshihiro.shirmoda.uh@renesas.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "7191047028471c74808291d35dd0502cf73e4d2a", "tree": "a27ef2c31065af64715e56820ca07b6b33af1a3a", "parents": [ "d7058a79c56abf58bb33a5c2eee2f7cde6f5ec36" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 17:45:14 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:28 2011 -0700" }, "message": "netx: Move the netx driver\n\nMove the netx driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "d7058a79c56abf58bb33a5c2eee2f7cde6f5ec36", "tree": "ad0ac94ec1526aaa82f10ce54ebdab9aa30a959f", "parents": [ "580416e6e4a886512ba692f245a9cb87f75afac7" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 25 03:18:24 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:14 2011 -0700" }, "message": "dm9000: Move the Davicom driver\n\nMove the Davicom driver into drivers/net/ethernet/davicom/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Ben Dooks \u003cben@simtec.co.uk\u003e\nCC: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "580416e6e4a886512ba692f245a9cb87f75afac7", "tree": "846fd01e43b5de123515bc2248260d51440eaf5b", "parents": [ "1fe003fd4247edf0d1ccf32061b046b90492a954" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 16:12:37 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:09 2011 -0700" }, "message": "enc28j60: Move the Microchip driver\n\nMove the Microchip driver into drivers/net/ethernet/microchip/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Claudio Lanconelli \u003clanconelli.claudio@eptar.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "1fe003fd4247edf0d1ccf32061b046b90492a954", "tree": "402789a0fa44824a74c880828161b61394d392b2", "parents": [ "4ee542995273f6d6a83bc76cd13d71662f1c141c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 14:51:26 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:03 2011 -0700" }, "message": "greth: Move the Aeroflex Gaisler driver\n\nMove the Aeroflex Gaisler driver into drivers/net/ethernet/aeroflex/\nand make the necessary Kconfig and Makefile changes.\n\nCC: Kristoffer Glembo \u003ckristoffer@gaisler.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "4ee542995273f6d6a83bc76cd13d71662f1c141c", "tree": "0bcbb158db15f67556fe4bc7432d84fff2b992a4", "parents": [ "9c8571da0a85e4491d1d5bda088b534087e29497" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 14:33:02 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:46:58 2011 -0700" }, "message": "ethoc: Move the Avionic driver\n\nMove the Avionic driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Thierry Reding \u003cthierry.reding@avionic-design.de\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9c8571da0a85e4491d1d5bda088b534087e29497", "tree": "c565160211fd681db03e2e802ddf669a0b6d105c", "parents": [ "7e25d72458c64e6ca76d69ae8da9ba98f1bf9d25" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 14:01:17 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:46:51 2011 -0700" }, "message": "dnet: Move the Dave Ethernet driver\n\nMove the Dave Ethernet driver into drivers/net/ethernet/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Ilya Yanok \u003cyanok@emcraft.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "7e25d72458c64e6ca76d69ae8da9ba98f1bf9d25", "tree": "2e40c0a52349fbafb1c8e580355f4a6a5835f186", "parents": [ "9bba23b0ae933a143f8ea89e59c6becf0c1c1d1e" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 13:19:50 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:46:43 2011 -0700" }, "message": "hp100: Move the HP driver\n\nMove the HP driver into drivers/net/ethernet/hp/ and\nmade the necessary Kconfig and Makefile changes.\n\nCC: Jaroslav Kysela \u003cperex@perex.cz\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9bba23b0ae933a143f8ea89e59c6becf0c1c1d1e", "tree": "128d489d1e14d3e422fe74845eb4e211b3993272", "parents": [ "69b4b0952b7ef0bf9048723aa8f4ec3fd47d1fc9" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 02:13:24 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:39:02 2011 -0700" }, "message": "starfire: Move the Adaptec driver\n\nMove the Adaptec driver into drivers/net/ethernet/adaptec/ and make\nthe necessary Kconfig and Makefile changes.\n\nCC: Ion Badulescu \u003cionut@badula.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "69b4b0952b7ef0bf9048723aa8f4ec3fd47d1fc9", "tree": "226427069cf8321bedc4c27f18a1706f7c99c275", "parents": [ "15c037d6423eefb0fc2763f875dbacb71109d603" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 23 23:52:55 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:52 2011 -0700" }, "message": "forcedeth: Move the NVIDIA nForce driver\n\nMove the nForce driver into drivers/net/ethernet/nvidia/ and make\nthe necessary Kconfig and Makefile changes.\n\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "15c037d6423eefb0fc2763f875dbacb71109d603", "tree": "d7ff47378cf51c6998bfb7b781b96a23c848f5b0", "parents": [ "58565a35eab01eb5fba928af23d31a636d03a056" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 18 03:26:31 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:47 2011 -0700" }, "message": "fealnx: Move the Myson driver\n\nMove the Myson driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "58565a35eab01eb5fba928af23d31a636d03a056", "tree": "dda6047a09182bc4ac866a82e2303501496ff6a9", "parents": [ "9f2f381f813858755f5b6ef7af316feda0726ef3" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 23 23:26:01 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:34 2011 -0700" }, "message": "r6040: Move the RDC driver\n\nMove the RDC driver into drivers/net/ethernet/rdc/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Florian Fainelli \u003cflorian@openwrt.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9f2f381f813858755f5b6ef7af316feda0726ef3", "tree": "d92fe910d8a8ef2c06ddeeb88ecd786d315f713e", "parents": [ "7b35f03338a8557122e62ea1a011f1628b978e8d" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 18 01:52:36 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:26 2011 -0700" }, "message": "macb: Move the Atmel driver\n\nMove the Atmel driver into drivers/net/ethernet/cadence/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCC: Jamie Iles \u003cjamie@jamieiles.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Jamie Iles \u003cjamie@jamieiles.com\u003e\nAcked-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n" }, { "commit": "7b35f03338a8557122e62ea1a011f1628b978e8d", "tree": "3dc66cadbfa8f86c43bd19fac73c954f9b762b24", "parents": [ "ae7668d03c4de78dd0be79278f410a1415786e67" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 18 00:01:26 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:13 2011 -0700" }, "message": "bfin_mac: Move the Analog Devices Inc driver\n\nMove the Analog Devices Inc driver into drivers/net/ethernet/adi/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: \u003cuclinux-dist-devel@blackfin.uclinux.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Bob Liu \u003cbob.liu@analog.com\u003e\n" }, { "commit": "ae7668d03c4de78dd0be79278f410a1415786e67", "tree": "a740f183d7ed8601a5cc090afc0e092e02a8b1ad", "parents": [ "3215df6a8e35fe6fc7c86ee0df2863c669a8e068" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Jul 22 17:36:06 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:08 2011 -0700" }, "message": "lantiq: Move the Lantiq SoC driver\n\nMove the Lantiq driver into drivers/net/ethernet/ and the\nnecessary Kconfig and Makefile changes.\n\nCC: John Crispin \u003cblogic@openwrt.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: John Crispin \u003cblogic@openwrt.org\u003e\n" }, { "commit": "3215df6a8e35fe6fc7c86ee0df2863c669a8e068", "tree": "dca18e0d61b12fcda96b480572e41d2c1ea9431c", "parents": [ "19c72cacce0ed8def4a37a5b4c4408cc83cf949c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Tue Jul 19 01:15:12 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:01 2011 -0700" }, "message": "mipsnet: Move the MIPS driver\n\nMove the MIPS drivers into drivers/net/ethernet/ and\nmake the necessary Kconfig and Makefile changes.\n\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "19c72cacce0ed8def4a37a5b4c4408cc83cf949c", "tree": "91c87ef23a6d8f3555db3a58023c6e8cff84e71e", "parents": [ "7443713a31f284365454493a9adbaea02bcc4344" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Jun 17 21:45:53 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:37:45 2011 -0700" }, "message": "korina: Move the IDT driver\n\nMove the IDT driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes\n\nCC: \"IDT Inc.\" \u003crischelp@idt.com\u003e\nCC: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCC: Florian Fainelli \u003cflorian@openwrt.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "7443713a31f284365454493a9adbaea02bcc4344", "tree": "58e4ec1abf2b85a3cb54efe71350ca4f193c2eac", "parents": [ "b13ad8f498793dc582b7f42f27b8f44490bd608d" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Jun 16 15:02:54 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:37:35 2011 -0700" }, "message": "ipg: Move the IC Plus driver\n\nMove the IC Plus driver into drivers/net/ethernet/icplus/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: \u003ccraig_rich@sundanceti.com\u003e\nCC: \u003csorbica@icplus.com.tw\u003e\nCC: \u003cjesse@icplus.com.tw\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "b13ad8f498793dc582b7f42f27b8f44490bd608d", "tree": "d0a1acf3e2d89fbc3bbf0d11fd2b60a41057a55c", "parents": [ "63d24a0eb71b1ec5ed302816379aaf76eecb053c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Jun 15 11:23:00 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:30 2011 -0700" }, "message": "xilinx/ll_temac: Move the Xilinx drivers\n\nMove the Xilinx drivers into drivers/net/ethernet/xilinx/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: John Williams \u003cjohn.williams@petalogix.com\u003e\nCC: \"David H. Lynch Jr.\" \u003cdhlii@dlasys.net\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "63d24a0eb71b1ec5ed302816379aaf76eecb053c", "tree": "d277238b203e8cdcf4bf63e58192a68c40f46ece", "parents": [ "c23c5c1663b36c1428df32d1645232662459e02f" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Jun 15 10:17:58 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:22 2011 -0700" }, "message": "jme: Move the JME driver\n\nMove the JME driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Guo-Fu Tseng \u003ccooldavid@cooldavid.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "c23c5c1663b36c1428df32d1645232662459e02f", "tree": "99a1497e3599cffd5945936f3552a4e0cb8b73dc", "parents": [ "554f4ffd3b2cd88e42007d069bc519563d0b459f" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Jun 15 09:51:27 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:18 2011 -0700" }, "message": "octeon: Move the Cavium driver\n\nMove the Cavium driver to drivers/net/ethernet/octeon/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: David Daney \u003cdavid.daney@cavium.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: David Daney \u003cdavid.daney@cavium.com\u003e\n" }, { "commit": "554f4ffd3b2cd88e42007d069bc519563d0b459f", "tree": "3701f6d17551bc275d5622721c149521327faaea", "parents": [ "b544dbac41218fd015ac79455cfc1e57736e9b0c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Tue Jun 14 14:02:57 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:14 2011 -0700" }, "message": "hamachi/yellowfin: Move the packet engine drivers\n\nMove the packet engine drivers to drivers/net/ethernet/packetengines/\nand the necessary Kconfig and Makefile changes.\n\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "b544dbac41218fd015ac79455cfc1e57736e9b0c", "tree": "6881af397456d0237dbb123ccb585a1a8086c166", "parents": [ "de69a4f240a1d43bc6a587c836c5ce1c66e36f23" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Tue Jun 14 12:56:50 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:10 2011 -0700" }, "message": "davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers\n\nMove the Texas Instruments drivers to drivers/net/ethernet/ti/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Sriram \u003csrk@ti.com\u003e\nCC: Vinay Hegde \u003cvinay.hegde@ti.com\u003e\nCC: Cyril Chemparathy \u003ccyril@ti.com\u003e\nCC: Samuel Chessman \u003cchessman@tux.org\u003e\nCC: \u003ctorben.mathiasen@compaq.com\u003e\nCC: Eugene Konev \u003cejka@imfi.kspu.ru\u003e\nCC: Florian Fainelli \u003cflorian@openwrt.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "de69a4f240a1d43bc6a587c836c5ce1c66e36f23", "tree": "69cb310c3231a648b174b49cec66c03ccb18bc95", "parents": [ "e75ed60cbaf6a2b5f14f00d96d926110f983be6b" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Mon Jun 13 10:51:34 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:07 2011 -0700" }, "message": "s6gmac: Move the s6gmac drivers\n\nMove the s6gmac driver to drivers/net/ethernet/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Oskar Schirmer \u003cos@emlix.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "e75ed60cbaf6a2b5f14f00d96d926110f983be6b", "tree": "fcc6f765bfb782c34381b2801eba3c4d38077c99", "parents": [ "679ec0ef08afde98fd5b2d1aa9fb3e50cce657a0" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 30 01:15:34 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:04 2011 -0700" }, "message": "tsi108*: Move the Tundra driver\n\nMove the Tundra driver to drivers/net/ethernet/tundra/ and\nmake the necessary Kocnfig and Makefile changes.\n\nCC: Kong Lai \u003ckong.lai@tundra.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "679ec0ef08afde98fd5b2d1aa9fb3e50cce657a0", "tree": "885b5a1a357707d858d366651677c173f31fa68e", "parents": [ "57d0b7a0d77d0b770682e425ff3fa270c65a4eb5" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 17 00:20:45 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:40:59 2011 -0700" }, "message": "nuvoton: Move the Nuvoton driver\n\nMove the Nuvoton driver into drivers/net/ethernet/nuvoton/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Wan ZongShun \u003cmcuos.com@gmail.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "57d0b7a0d77d0b770682e425ff3fa270c65a4eb5", "tree": "2e7181be255386fea20b21d13d92946bdb05f440", "parents": [ "8c7de408fd2caa11b8b3a1ed8a1b141ce127ad4e" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 16 23:50:52 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:40:54 2011 -0700" }, "message": "cirrus: Move the Cirrus network driver\n\nMove the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/\nand make the necessary Kconfig and Makefile changes\n\nCC: Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "8c7de408fd2caa11b8b3a1ed8a1b141ce127ad4e", "tree": "19886abfa361eebc0113143263e593909b88b259", "parents": [ "4c78893b3d107e2a053c8f51c526510857c09858" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Mon Jun 13 08:43:49 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:40:44 2011 -0700" }, "message": "sis*: Move the Silicon Integrated Systems (SiS) drivers\n\nMove the SiS drivers into drivers/net/ethernet/sis/ and make the\nnecessary Kconfig and Makefile changes\n\nCC: Daniele Venzano \u003cvenza@brownhat.org\u003e\nCC: Francois Romieu \u003cromieu@fr.zoreil.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "4c78893b3d107e2a053c8f51c526510857c09858", "tree": "52292bb85820c557aed39163bdc7e389dfed0142", "parents": [ "33d480ce6d43326e2541fd79b3548858a174ec3c" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 03:00:47 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 03:00:47 2011 -0700" }, "message": "cnic: Fix select dependencies in bnx2fc/bnx2i Kconfig.\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "33d480ce6d43326e2541fd79b3548858a174ec3c", "tree": "c938ee8c07a2e0f33178069b55439a54188f38fa", "parents": [ "cd28ca0a3dd17c68d24b839602a0e6268ad28b5d" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Thu Aug 11 19:30:52 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 02:55:28 2011 -0700" }, "message": "net: cleanup some rcu_dereference_raw\n\nRCU api had been completed and rcu_access_pointer() or\nrcu_dereference_protected() are better than generic\nrcu_dereference_raw()\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cd28ca0a3dd17c68d24b839602a0e6268ad28b5d", "tree": "3e77945743e2c74c36b6942ad5bfe46a07eb9caa", "parents": [ "68c3e5a7b91513010d2536e4bcd7bdd54d0e6acf" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Tue Aug 09 08:15:58 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 02:55:28 2011 -0700" }, "message": "neigh: reduce arp latency\n\nRemove the artificial HZ latency on arp resolution.\n\nInstead of firing a timer in one jiffy (up to 10 ms if HZ\u003d100), lets\nsend the ARP message immediately.\n\nBefore patch :\n\n# arp -d 192.168.20.108 ; ping -c 3 192.168.20.108\nPING 192.168.20.108 (192.168.20.108) 56(84) bytes of data.\n64 bytes from 192.168.20.108: icmp_seq\u003d1 ttl\u003d64 time\u003d9.91 ms\n64 bytes from 192.168.20.108: icmp_seq\u003d2 ttl\u003d64 time\u003d0.065 ms\n64 bytes from 192.168.20.108: icmp_seq\u003d3 ttl\u003d64 time\u003d0.061 ms\n\nAfter patch :\n\n$ arp -d 192.168.20.108 ; ping -c 3 192.168.20.108\nPING 192.168.20.108 (192.168.20.108) 56(84) bytes of data.\n64 bytes from 192.168.20.108: icmp_seq\u003d1 ttl\u003d64 time\u003d0.152 ms\n64 bytes from 192.168.20.108: icmp_seq\u003d2 ttl\u003d64 time\u003d0.064 ms\n64 bytes from 192.168.20.108: icmp_seq\u003d3 ttl\u003d64 time\u003d0.074 ms\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "68c3e5a7b91513010d2536e4bcd7bdd54d0e6acf", "tree": "a2ea612e175a67eb2fed43962782ed303da5125d", "parents": [ "8df158ac36fa0937f51c372f0c2d0ad1b86ebe4c" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Tue Aug 09 06:23:07 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 02:54:22 2011 -0700" }, "message": "benet: fix build error on 32bit arch\n\nError comes from commit ac124ff973e27802797\n(be2net: cleanup and refactor stats code)\n\nERROR: \"__udivdi3\" [drivers/net/benet/be2net.ko] undefined!\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nCC: Sathya Perla \u003csathya.perla@emulex.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8df158ac36fa0937f51c372f0c2d0ad1b86ebe4c", "tree": "320edf6c6b8ecc035b77ac8e91974d870490ad92", "parents": [ "bcc9736c6c201b0992c9d0a5b5a30c35138e5782" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 30 00:36:02 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:27:04 2011 -0700" }, "message": "toshiba: Move the Toshiba drivers\n\nMove the Toshiba ethernet drivers into drivers/net/ethernet/toshiba\nand make the necessary Kconfig and Makefile changes.\n\nCC: Geoff Levand \u003cgeoff@infradead.org\u003e\nCC: Jens Osterkamp \u003cJens.Osterkamp@de.ibm.com\u003e\nCC: Ishizaki Kou \u003ckou.ishizaki@toshiba.co.jp\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "bcc9736c6c201b0992c9d0a5b5a30c35138e5782", "tree": "b7993c2f5f0b7372a1ce0994476bfb7696901506", "parents": [ "ec21e2ec367697b4803e82662bdff6c8567745fc" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 11 03:26:31 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:22:18 2011 -0700" }, "message": "ks8*/ksz8*: Move the Micrel drivers\n\nMove the Micrel drivers into drivers/net/ethernet/micrel/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Ben Dooks \u003cben@simtec.co.uk\u003e\nCC: Tristram Ha \u003cTristram.Ha@micrel.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "ec21e2ec367697b4803e82662bdff6c8567745fc", "tree": "cdb42f597ff5e60516bdab59d306006fd1fafd1c", "parents": [ "5346ebf6db077d963e9d81af9df290d7f5532492" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 11 02:29:36 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:22:12 2011 -0700" }, "message": "freescale: Move the Freescale drivers\n\nMove the Freescale drivers into drivers/net/ethernet/freescale/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Sandeep Gopalpet \u003csandeep.kumar@freescale.com\u003e\nCC: Andy Fleming \u003cafleming@freescale.com\u003e\nCC: Shlomi Gridish \u003cgridish@freescale.com\u003e\nCC: Li Yang \u003cleoli@freescale.com\u003e\nCC: Pantelis Antoniou \u003cpantelis.antoniou@gmail.com\u003e\nCC: Vitaly Bordug \u003cvbordug@ru.mvista.com\u003e\nCC: Dan Malek \u003cdmalek@jlc.net\u003e\nCC: Sylvain Munaut \u003ctnt@246tNt.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "5346ebf6db077d963e9d81af9df290d7f5532492", "tree": "599c964dc98a13be7af437172b1002b5bf2cbf71", "parents": [ "f2148a472883ddf77626fff52b070655a8a0a788" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 11 01:13:22 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:22:08 2011 -0700" }, "message": "eth16i: Move the Allied Telesis/Fujitsu drivers\n\nMove the Allied Telesis/Fujitsu drivers into drivers/net/ethernet/fujitsu/\nand make the necessary Kconfig and Makefile changes.\n\nCC: Shingo Fujimoto \u003cshingo@flab.fujitsu.co.jp\u003e\nCC: Yutaka Tamiya \u003ctamy@flab.fujitsu.co.jp\u003e\nCC: Rene Schmit \u003crene@bss.lu\u003e\nCC: Mika Kuoppala \u003cmiku@iki.fi\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "f2148a472883ddf77626fff52b070655a8a0a788", "tree": "4224e4b1f7b7bbec8a5c5ebbd2ed1e2a69a89b9a", "parents": [ "527a626601de6ff89859de90883cc546892bf3ca" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 20:43:09 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:56 2011 -0700" }, "message": "via-*: Move the VIA drivers\n\nMove the VIA drivers into drivers/net/ethernet/via/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Roger Luethi \u003crl@hellgate.ch\u003e\nCC: Francois Romieu \u003cromieu@fr.zoreil.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "527a626601de6ff89859de90883cc546892bf3ca", "tree": "5e30febb8d509e036cee5702676f386a0d4e4ad3", "parents": [ "1c1538be1da768fe0209a11e1bdf9dd7ab38905a" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 20:18:55 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:51 2011 -0700" }, "message": "skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers\n\nMove the Marvell Ethernet drivers into drivers/net/ethernet/marvell/\nand make the necessary Kconfig and Makefile changes.\n\nCC: Sachin Sanap \u003cssanap@marvell.com\u003e\nCC: Zhangfei Gao \u003czgao6@marvell.com\u003e\nCC: Philip Rakity \u003cprakity@marvell.com\u003e\nCC: Mark Brown \u003cmarkb@marvell.com\u003e\nCC: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nCC: Stephen Hemminger \u003cshemminger@linux-foundation.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "1c1538be1da768fe0209a11e1bdf9dd7ab38905a", "tree": "ef41cb89bb9b7b576a938e20e78fb63ca53ace35", "parents": [ "9e13fbf7af3cb044f365e8df9c0e9277715cfc7c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 19:48:55 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:47 2011 -0700" }, "message": "pch_gbe: Move the OKI Semiconductor driver\n\nMove the OKI Semiconductor driver into driver/net/ethernet/oki-semi/\nand make the necessary Kconfig and Makefile changes.\n\nNote: there is no documented maintainer for this driver, so I CC\u0027d\nthe last 2 major contributors.\n\nCC: Tomoya \u003ctomoya-linux@dsn.okisemi.com\u003e\nCC: Toshiharu Okada \u003ctoshiharu-linux@dsn.okisemi.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9e13fbf7af3cb044f365e8df9c0e9277715cfc7c", "tree": "9093489bce7301d1d58bdfa7d7142ba9fb83e49a", "parents": [ "8862bf1ed60de49550109b7023a0a33eb7db8b3c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Jul 15 03:18:21 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:43 2011 -0700" }, "message": "seeq: Move the SEEQ drivers\n\nMove the drivers that use SEEQ chipset into drivers/net/ethernet/seeq\nand make the necessary Kconfig and Makefile changes.\n\nCC: Russell King \u003clinux@arm.linux.org.uk\u003e\nCC: Hamish Coleman \u003chamish@zot.apana.org.au\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "8862bf1ed60de49550109b7023a0a33eb7db8b3c", "tree": "76e2c24e847a986c139061f5d522aa94ce97e083", "parents": [ "a88394cfb58007cca945699545469017beb0d206" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 07:50:27 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:33 2011 -0700" }, "message": "ioc3-eth/meth: Move the SGI drivers\n\nMove the SGI drivers into drivers/net/ethernet/sgi/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "a88394cfb58007cca945699545469017beb0d206", "tree": "7efa1efcaf18d1b8f7bede1f25acdfc0c657c086", "parents": [ "5ff2241dd42ade03572753f9ed7743719b47c474" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 07:15:19 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:25 2011 -0700" }, "message": "ewrk3/tulip: Move the DEC - Tulip drivers\n\nMove the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/\nand make the necessary Kconfig and Makefile changes.\n\nThe Digital Equioment (DEC) driver ewrk3 was moved into\ndrivers/net/ethernet/dec/ and the remaining drivers (Tulip)\nwere moved into drivers/net/ethernet/dec/tulip/\n\nCC: Tobias Ringstrom \u003ctori@unhappy.mine.nu\u003e\nCC: Grant Grundler \u003cgrundler@parisc-linux.org\u003e\nCC: David Davies \u003cdavies@maniac.ultranet.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Grant Grundler \u003cgrundler@parisc-linux.org\u003e\n" }, { "commit": "5ff2241dd42ade03572753f9ed7743719b47c474", "tree": "3e4d2fbf7e4bbb7de3675800856572e93a67a703", "parents": [ "af3dcd2f449b7243a4c7b987125ffc40fad262f0" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 23:06:28 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 23:06:28 2011 -0700" }, "message": "spider_net: fix compile issue introduced by driver move\n\nBoth Spider net driver and Sun GEM driver use the sungem_phy.o object.\nThis fix creates a Kconfig object for sungem_phy (like MDIO) so that\nboth drivers require the SUNGEM_PHY object.\n\nThis has been compile tested for the Sun GEM driver.\n\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "af3dcd2f449b7243a4c7b987125ffc40fad262f0", "tree": "a1041245a24a472ec14932f3a1ab4426e8a344d6", "parents": [ "f08e6c0a87db74397ddbcca7cb189d50310d8ddf" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 23:05:05 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 23:05:05 2011 -0700" }, "message": "mlx4: Fix infiniband Kconfig dependencies.\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f08e6c0a87db74397ddbcca7cb189d50310d8ddf", "tree": "110ac92d7a450fbb5f875e9af652e04a5cbbf07d", "parents": [ "2b133ad6e9e96798007e64eb912c42fa00adef0a" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 22:59:31 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 23:00:40 2011 -0700" }, "message": "cxgbi: Fix scsi Kconfig dependencies.\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2b133ad6e9e96798007e64eb912c42fa00adef0a", "tree": "34d1760a9257b150289893cda05b4adfa1990306", "parents": [ "3401299a1b9e747cbf7de2cc0c8f6376c3cbe565" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 06:55:16 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:59 2011 -0700" }, "message": "atl*: Move the Atheros drivers\n\nMove the Atheros drivers into drivers/net/ethernet/atheros/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Jay Cliburn \u003cjcliburn@gmail.com\u003e\nCC: Chris Snook \u003cchris.snook@gmail.com\u003e\nCC: Jie Yang \u003cjie.yang@atheros.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "3401299a1b9e747cbf7de2cc0c8f6376c3cbe565", "tree": "bdc229019b5a31d8b3bcf422055eccb261259ca4", "parents": [ "a8fe65b8f031c5c0a7414059773eaa962e5243cb" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 00:04:35 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:50 2011 -0700" }, "message": "de6*/dl2k/sundance: Move the D-Link drivers\n\nMove the D-Link drivers into drivers/net/ethernet/dlink/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Bjorn Ekwall \u003cbj0rn@blox.se\u003e\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nCC: Edward Peng \u003cedward_peng@dlink.com.tw\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "a8fe65b8f031c5c0a7414059773eaa962e5243cb", "tree": "7deefb4ca57299d315cf2e3f97b9919857eaacb4", "parents": [ "baf0fbfe7ea34cd676e3362a62033d8ca1c52d99" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu May 19 23:27:55 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:42 2011 -0700" }, "message": "8139*/atp/r8169/sc92031: Move the Realtek drivers\n\nMove the Realtek drivers into drivers/net/ethernet/realtek/ and make\nthe necessary Kconfig and Makefile changes.\n\nCC: Realtek linux nic maintainers \u003cnic_swsd@realtek.com\u003e\nCC: Francois Romieu \u003cromieu@fr.zoreil.com\u003e\nCC: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "baf0fbfe7ea34cd676e3362a62033d8ca1c52d99", "tree": "339eac61055d73c8301169ca46591eb7717b93a9", "parents": [ "b47da97728c045a8fd75f36e59ba08cddc8f2292" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Tue Jun 21 17:55:27 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:35 2011 -0700" }, "message": "ftgmac100/ftmac100: Move the Faraday drivers\n\nMove the Faraday driver into drivers/net/ethernet/faraday/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: \"Po-Yu Chuang\" \u003cratbert@faraday-tech.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Po-Yu Chuang \u003cratbert@faraday-tech.com\u003e\n" }, { "commit": "b47da97728c045a8fd75f36e59ba08cddc8f2292", "tree": "71aa03f391344e9dcec4bee239f6d5c67a0fa361", "parents": [ "d9fb9f384292d848ad9db386bcf97f1e06e60264" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Jul 14 22:13:23 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:28 2011 -0700" }, "message": "xscale: Move the Intel XScale IXP drivers\n\nMove the Intel XScale IXP drivers into drivers/net/ethernet/xscale/\nand make the necessary Kconfig and Makefile changes.\n\nCC: Krzysztof Halasa \u003ckhc@pm.waw.pl\u003e\nCC: Lennert Buytenhek \u003ckernel@wantstofly.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "d9fb9f384292d848ad9db386bcf97f1e06e60264", "tree": "128d65c7255f188ec7d4cea4fa637c700bcb5828", "parents": [ "8fb6b0908176704a3ea22005e8a9fa3ebf35b5be" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed May 18 05:14:22 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:21 2011 -0700" }, "message": "*sonic/natsemi/ns83829: Move the National Semi-conductor drivers\n\nMove the National Semi-conductor drivers into drivers/net/ethernet/natsemi/\nand make the necessary Kconfig and Makefile changes. Also moved the 8390\n(National Semi-conductor) devices as a sub-menu of National Semi-conductor\ndevices.\n\n- moved the ibmlana driver as well into this directory since it is a\n \"SONIC\" driver\n\nCC: Alfred Arnold \u003calfred.arnold@lancom.de\u003e\nCC: Thomas Bogendoerfer \u003ctsbogend@alpha.franken.de\u003e\nCC: Harald Welte \u003claforge@gnumonks.org\u003e\nCC: Tim Hockin \u003cthockin@hockin.org\u003e\nCC: \u003clinux-ns83820@kvack.org\u003e\nCC: Kevin Chea \u003ckchea@yahoo.com\u003e\nCC: Marc Gauthier \u003cmarc@linux-xtensa.org\u003e\nCC: Chris Zankel \u003cchris@zankel.net\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Marc Gauthier \u003cmarc@tensilica.com\u003e\n" }, { "commit": "8fb6b0908176704a3ea22005e8a9fa3ebf35b5be", "tree": "1eefa29ce73cd5be2b0fcbd12d03ac148d171cc5", "parents": [ "7ac6653a085b41405758bc16b2525db56ee0a23f" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Mon May 16 01:39:01 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:07 2011 -0700" }, "message": "bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers\n\nMove the Apple drivers into driver/net/ethernet/apple/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Paul Mackerras \u003cpaulus@samba.org\u003e\nCC: Paul Mackerras \u003cpaulus@au.ibm.com\u003e\nCC: Russell Nelson \u003cnelson@crynwr.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "7ac6653a085b41405758bc16b2525db56ee0a23f", "tree": "1a3fc878f338778dd8a9ee8b06dab899a4ec5a87", "parents": [ "ef7f54297df683665145859501f63c801f6c7ea8" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Mon May 16 00:05:19 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:01 2011 -0700" }, "message": "stmmac: Move the STMicroelectronics driver\n\nMove the STMicroelectronics driver into driver/net/ethernet/stmicro/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "ef7f54297df683665145859501f63c801f6c7ea8", "tree": "b41a8cc3d8b786984859e0ba483ddbe796314ff7", "parents": [ "ded19addf9c937d83b9bfb4d73a836732569041b" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun May 15 21:46:41 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:28:56 2011 -0700" }, "message": "tehuti: Move the Tehuti driver\n\nMove the Tehuti driver into drivers/net/ethernet/tehuti/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Alexander Indenbaum \u003cbaum@tehutinetworks.net\u003e\nCC: Andy Gospodarek \u003candy@greyhouse.net\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "ded19addf9c937d83b9bfb4d73a836732569041b", "tree": "ce72d3ed657354a9755c1902684b4b09f0ef10fb", "parents": [ "e7c379d2a0dcb8c30cb580184a0df11805464703" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun May 15 20:56:37 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:28:47 2011 -0700" }, "message": "pasemic_mac*: Move the PA Semi driver\n\nMove the PA Semi driver into drivers/net/ethernet/pasemi/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Olof Johansson \u003colof@lixom.net\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Olof Johansson \u003colof@lixom.net\u003e\n" }, { "commit": "e7c379d2a0dcb8c30cb580184a0df11805464703", "tree": "b9fa6855345c6031226759fe71166bece3625001", "parents": [ "d5da4510a742bb85182dcab8a47f63baaebb5ec3" ], "author": { "name": "Jiri Pirko", "email": "jpirko@redhat.com", "time": "Wed Aug 10 06:09:45 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:44:38 2011 -0700" }, "message": "rtnetlink: remove initialization of dev-\u003ereal_num_tx_queues\n\ndev-\u003ereal_num_tx_queues is correctly set already in alloc_netdev_mqs.\n\nSigned-off-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d5da4510a742bb85182dcab8a47f63baaebb5ec3", "tree": "af7172c9cbd42e4b3715f6e47b95f116cca99784", "parents": [ "5098af0abf3c1ed454159e081e75cf7cfc6ddf60" ], "author": { "name": "Jiri Pirko", "email": "jpirko@redhat.com", "time": "Wed Aug 10 06:09:44 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:44:38 2011 -0700" }, "message": "bonding: implement get_tx_queues rtnk_link_op\n\nIf bonding device is created via rtnl, it is created with default number\nof rx/tx queues. This patch implements callback in bonding so the\ncorrect value (previously specified by bonding module param) is used.\n\nSigned-off-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5098af0abf3c1ed454159e081e75cf7cfc6ddf60", "tree": "0bbb1759d6d3a79f1757e0325243496e2e6110ec", "parents": [ "e827e3262234144d9f978dcf66b8ed806140bb3f" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Mon Aug 08 16:21:42 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:30:13 2011 -0700" }, "message": "bna: Driver Version changed to 3.0.2.0\n\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e827e3262234144d9f978dcf66b8ed806140bb3f", "tree": "4438ffbc063fae0d926733dfe352485a00220a80", "parents": [ "f6d46a2ea909f96a318635674f4924b816c161c4" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Mon Aug 08 16:21:41 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:30:13 2011 -0700" }, "message": "bna: Remove Obsolete Files\n\nChange details:\n - Removec bfi_ll.h bna_hw.h bna_ctrl.c and bna_txrx.c due to ENET, MSGQ\n and TXRX changes for new FW Driver interface and TX RX re-design.\n\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f6d46a2ea909f96a318635674f4924b816c161c4", "tree": "9c32877eea102608766a94b97414c351f2606d0b", "parents": [ "078086f3c17fae8af6c077153773c4a10392ffbf" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Mon Aug 08 16:21:40 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:30:13 2011 -0700" }, "message": "bna: Remove Unused Code\n\nRemove unused code.\n\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "078086f3c17fae8af6c077153773c4a10392ffbf", "tree": "009c110c4f735f15eb149b49c8290e1d9e5c424a", "parents": [ "6849c6b30772bb08ed52c3ec00e8245e70e25a2b" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Mon Aug 08 16:21:39 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:30:13 2011 -0700" }, "message": "bna: ENET and Tx Rx Redesign Enablement\n\nChange details:\nThis patch contains additional structure and function definition changes\nthat are required to enable the new msgq/enet/txrx redesign introduced\nby the previous 4 patches.\n - structure and function definition changes to header files as a result\n of Ethport, Enet, IOCEth, Tx, Rx redesign.\n - ethtool changes to use new enet function and definitions\n - Set number of Tx and Rx queues bassed on underlying hardware. Define\n separate macros for maximum and supported numbers of Tx and Rx queues\n based on underlying hardware. Take VLAN header into account for MTU\n calculation. Default to INTx mode when pci_enable_msix() fails. Set a\n bit in Rx poll routine, check and wait for that bit to be cleared in\n the cleanup routine before proceeding.\n - The TX and Rx coalesce settings are programmed in steps of 5 us. The value\n that are not divisible by 5 are rounded to the next lower number. This was\n causing the value os 1 to 4 to be rounded to 0, which is an invalid setting.\n When creating Rx and Tx object, we are currently assigning the default\n values of Rx and Tx coalescing_timeo. If these values are changed in the\n driver to a different value, the change is lost during such operations as\n MTU change. In order to avoid that, pass the configured value of\n coalescing_timeo before Rx and Tx object creation. Fix\n bnad_tx_coalescing_timeo_set() so it applies to all the Tx objects.\n - Reorg uninitialization path in case of pci_probe failure.\n - Hardware clock setup changes to pass asic generation, port modes and\n asic mode as part firmware boot parameters to firmware.\n - FW mailbox interface changes to defined asic specific mailbox interfaces.\n h/w mailbox interfaces take 8-bit FIDs and 2-bit port id for owner. Cleaned\n up mailbox definitions and usage for new and old HW. Eliminated usage of\n ASIC ID. MSI-X vector assignment and programming done by firmware. Fixed\n host offsets for CPE/RME queue registers.\n - Implement polling mechanism for FW ready to have poll mechanism replaces\n the current interrupt based FW READY method. The timer based poll routine\n in IOC will query the ioc_fwstate register to see if there is a state\n change in FW, and sends the READY event. Removed infrastructure needed to\n support mbox READY event from fw as well as IOC code.\n - Move FW init to HW init. Handle the case where PCI mapping goes away when\n IOCPF state machine is waiting for semaphore.\n - Add IOC mbox call back to client indicating that the command is sent.\n\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6849c6b30772bb08ed52c3ec00e8245e70e25a2b", "tree": "c9cf21d45bd15045484103ac33cee5d071f47176", "parents": [ "f3bd51732390ca40a7f5bb7520289da4f3d63762" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Mon Aug 08 16:21:38 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:30:13 2011 -0700" }, "message": "bna: Add New HW Defs\n\nChange details:\n - Add new file bna_hw_defs.h to support new code MSGQ, ENET and TX RX redign.\n This makes bna_hw.h obsolete and is removed in a later patch. bna_hw_defs.h\n removes all unused HW register definition that were part of bna_hw.h.\n\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f3bd51732390ca40a7f5bb7520289da4f3d63762", "tree": "e0d0a77675878908c8daba88a0592e390040bc51", "parents": [ "45979c1e424f6a14495a4988343df176cb745f84" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Mon Aug 08 16:21:37 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:30:13 2011 -0700" }, "message": "bna: Tx and Rx Redesign\n\nChange details:\n - This patch contains the changes as a result of redesigning of Tx, Rx data\n path setup. In the old design, setting up Txqs, Rxqs were done in the driver.\n With the new design, most of the hardware setup steps for the Txq, Rxqs are\n moved to FW. Host driver issues commands to FW through the message queue to\n setup/teardown tx, rx data path. FW performs necessary steps and responds\n back to the driver with a status.\n - As a result of this redesign, the state machine implementation for Tx, Rx\n objects have changed significantly. Instead of doing the raw register access,\n these state machines mostly send a command to FW and wait for response and\n take the next action. In addition to tx, rx datapath setup, this patch also\n deals with rx filter configuration - such as unicast address, multicast\n address, vlan filter, promiscuous mode etc.\n\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "45979c1e424f6a14495a4988343df176cb745f84", "tree": "6cca0a555549c5d98534af18ca3f9c71c41c8ea6", "parents": [ "af027a34f34a8c0794a72dae8367e268eae89dbb" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Mon Aug 08 16:21:36 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:30:12 2011 -0700" }, "message": "bna: Introduce ENET as New Driver and FW Interface\n\nChange details:\n - This patch contains the messages, opcodes and structure format for the\n messages and responses exchanged between driver and the FW. In addition\n this patch contains the state machine implementation for Ethport, Enet,\n IOCEth.\n - Ethport object is responsible for receiving link state events, sending\n port enable/disable commands to FW.\n - Enet object is responsible for synchronizing initialization/teardown of\n tx \u0026 rx datapath configuration.\n - IOCEth object is responsible for init/un-init of IO Controller in the\n adapter which runs the FW.\n - This patch also contains code for initialization and resource assignment\n for Ethport, Enet, IOCEth, Tx, Rx objects.\n\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "af027a34f34a8c0794a72dae8367e268eae89dbb", "tree": "4af30be7fe275e1cb2b360c01e0d04a1ba81ad75", "parents": [ "a6a5580c4d90788d67a77c689d3ab22aa5eecfc3" ], "author": { "name": "Rasesh Mody", "email": "rmody@brocade.com", "time": "Mon Aug 08 16:21:35 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 07:30:12 2011 -0700" }, "message": "bna: MSGQ Implementation\n\nChange details:\n - Currently modules communicate with the FW using 32 byte command and\n response register. This limits the size of the command and response\n messages exchanged with the FW to 32 bytes. We need a mechanism to\n exchange the comamnds and responses exchange with FW that exceeds 32 bytes.\n\n - MSGQ implementation provides that facility. It removes the assumption that\n command/response queue size is precisely calculated to accommodate all\n concurrent FW commands/responses. The queue depth is made variable now, defined\n by a macro. A waiting command list is implemented to hold all the commands\n when there is no place in the command queue. Callback is implemented for\n each command entry to invoke the module posting the command, when there is\n space in the command queue and the command was finally posted to the queue.\n Module/Object information is embedded in the response for tracking purpose.\n\nSigned-off-by: Rasesh Mody \u003crmody@brocade.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a6a5580c4d90788d67a77c689d3ab22aa5eecfc3", "tree": "89080daf4b0b4939daadb807f19eca3e977d42cb", "parents": [ "9aa3283595451ca093500ff0977b106e1f465586" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 13 22:20:35 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:42:06 2011 -0700" }, "message": "enic: Move the Cisco driver\n\nMove the Cisco driver into drivers/net/ethernet/cisco/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Christian Benvenuti \u003cbenve@cisco.com\u003e\nCC: Vasanthy Kolluri \u003cvkolluri@cisco.com\u003e\nCC: Roopa Prabhu \u003croprabhu@cisco.com\u003e\nCC: David Wang \u003cdwang2@cisco.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9aa3283595451ca093500ff0977b106e1f465586", "tree": "89cd128f037b029b67f73fbff7d8cc38177c2b27", "parents": [ "86387e1ac4fcaa45ff5578013a78593d1a0ba279" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 13 14:29:12 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:41:59 2011 -0700" }, "message": "ehea/ibm*: Move the IBM drivers\n\nMove the IBM drivers into drivers/net/ethernet/ibm/ and make the\nnecessary Kconfig and Makefile changes.\n\n- Renamed ibm_new_emac to emac\n- Cleaned up Makefile and Kconfig options which referred to\n IBM_NEW_EMAC to IBM_EMAC\n- ibmlana driver is a National Semiconductor SONIC driver so\n it was not moved\n\nCC: Christoph Raisch \u003craisch@de.ibm.com\u003e\nCC: Santiago Leon \u003csantil@linux.vnet.ibm.com\u003e\nCC: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCC: David Gibson \u003cdwg@au1.ibm.com\u003e\nCC: Kyle Lucke \u003cklucke@us.ibm.com\u003e\nCC: Michael Ellerman \u003cmichael@ellerman.id.au\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "86387e1ac4fcaa45ff5578013a78593d1a0ba279", "tree": "25c662fa8226419e73c72873888634fe1df04693", "parents": [ "93f7848b77bcf1108879defd32612422ae80d785" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 13 02:51:01 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:41:47 2011 -0700" }, "message": "s2io/vxge: Move the Exar drivers\n\nMove the Exar drivers into drivers/net/ethernet/neterion/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Jon Mason \u003cjdmason@kudzu.us\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "93f7848b77bcf1108879defd32612422ae80d785", "tree": "d0b65277b4bd84334423e693870a0dcf50e1b699", "parents": [ "5a2cc190eb3fe58fe519795c509b01b25795992e" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 13 02:24:46 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:41:42 2011 -0700" }, "message": "myri*: Move the Myricom drivers\n\nMove the Myricom drivers into drivers/net/ethernet/myricom/ and make\nthe necessary Kconfig and Makefile changes.\n\nCC: Andrew Gallatin \u003cgallatin@myri.com\u003e\nCC: Brice Goglin \u003cbrice@myri.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "5a2cc190eb3fe58fe519795c509b01b25795992e", "tree": "9a319736bd77979ab5dbdc26d29424d84eb235b0", "parents": [ "f844a0ead401c3ce0f01a8bb4d6cea2f0f6ad863" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 13 01:32:22 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:41:35 2011 -0700" }, "message": "mlx4: Move the Mellanox driver\n\nMoves the Mellanox driver into drivers/net/ethernet/mellanox/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Roland Dreier \u003croland@kernel.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "f844a0ead401c3ce0f01a8bb4d6cea2f0f6ad863", "tree": "b929c2ecdac479844e503e51164dd9bf09609a32", "parents": [ "9aebddd11be42366f89b0296590770c02797aa98" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 13 01:00:03 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:41:14 2011 -0700" }, "message": "bna: Move the Brocade driver\n\nMoves the Brocade driver into drivers/net/ethernet/brocade/ and make\nthe necessary Kconfig and Makefile changes.\n\nCC: Rasesh Mody \u003crmody@brocade.com\u003e\nCC: Debashis Dutt \u003cddutt@brocade.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9aebddd11be42366f89b0296590770c02797aa98", "tree": "bca16cd2c06a513096e930ab6337bd6f9d9ac674", "parents": [ "874aeea5d01cac55c160a4e503e3ddb4db030de7" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 13 00:37:27 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:33:55 2011 -0700" }, "message": "be2net: Move the Emulex driver\n\nMoves the Emulex driver into drivers/net/ethernet/emulex/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Sathya Perla \u003csathya.perla@emulex.com\u003e\nCC: Subbu Seetharaman \u003csubbu.seetharaman@emulex.com\u003e\nCC: Ajit Khaparde \u003cajit.khaparde@emulex.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "874aeea5d01cac55c160a4e503e3ddb4db030de7", "tree": "2ec67fc737ebc853d954b914a70098ece1ded19b", "parents": [ "e689cf4a042772f727450035b102579b0c01bdc7" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 13 00:17:42 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:33:50 2011 -0700" }, "message": "sfc: Move the Solarflare drivers\n\nMoves the Solarflare drivers into drivers/net/ethernet/sfc/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Steve Hodgson \u003cshodgson@solarflare.com\u003e\nCC: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "e689cf4a042772f727450035b102579b0c01bdc7", "tree": "f2b17aa21b8358a8f7589fed46fa08688b439464", "parents": [ "8efc91254fda97ee78e2e0b8e016120e664131de" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu May 12 23:04:46 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:33:43 2011 -0700" }, "message": "cassini/niu/sun*: Move the Sun drivers\n\nMoves the Sun drivers into drivers/net/ethernet/sun/ and make\nthe necessary Kconfig and Makefile changes.\n\nOliver Hartkopp \u003csocketcan@hartkopp.net\u003e suggested removing the\nsun* prefix on the driver names. This type of change I will\nleave up to the driver maintainers.\n\nCC: Sam Creasey \u003csammy@sammy.net\u003e\nCC: Adrian Sun \u003casun@darksunrising.com\u003e\nCC: Benjamin Herrenscmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "8efc91254fda97ee78e2e0b8e016120e664131de", "tree": "3e8fdaad0c81411c49c19abe5e9b4db56fcdd740", "parents": [ "628a604842b68cb0fc483e7cd5fcfb836be633d5" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu May 12 21:21:33 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 02:33:31 2011 -0700" }, "message": "ni5010: Move the Racal-Interlan (Micom) driver\n\nMoves the Racal-Interlan driver into drivers/net/ethernet/racal/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: \"Jan-Pascal van Best\" \u003cjanpascal@vanbest.org\u003e\nCC: Andreas Mohr \u003candi@lisas.de\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "628a604842b68cb0fc483e7cd5fcfb836be633d5", "tree": "686b7f3eb491a9626c72b449e34baa3df3c303a9", "parents": [ "9de79c127cccecb11ae6a21ab1499e87aa222880", "115978859272b958366d4a08c99a24f9625fa663" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 10 22:05:54 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 10 22:05:54 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize\n" }, { "commit": "115978859272b958366d4a08c99a24f9625fa663", "tree": "e3eb08a76c0180bd5efa36985306878cbea5845f", "parents": [ "ae150435b59e68de00546330241727f2fec54517" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Jul 13 15:38:08 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 20:04:12 2011 -0700" }, "message": "i825xx: Move the Intel 82586/82593/82596 based drivers\n\nMove the drivers that use the i82586/i82593/i82596 chipsets into\ndrivers/net/ethernet/i825xx/ and make the necessary Kconfig and\nMakefile changes. There were 4 3Com drivers which were initially\nmoved into 3com/, which now reside in i825xx since they all used\nthe i82586 chip.\n\nCC: Philip Blundell \u003cphilb@gnu.org\u003e\nCC: Russell King \u003clinux@arm.linux.org.uk\u003e\nCC: \u003caris@cathedrallabs.org\u003e\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nCC: Chris Beauregard \u003ccpbeaure@undergrad.math.uwaterloo.ca\u003e\nCC: Richard Procter \u003crnp@paradise.net.nz\u003e\nCC: Andries Brouwer \u003caeb@cwi.nl\u003e\nCC: \"M.Hipp\" \u003chippm@informatik.uni-tuebingen.de\u003e\nCC: Richard Hirst \u003crichard@sleepie.demon.co.uk\u003e\nCC: Sam Creasey \u003csammy@oh.verio.com\u003e\nCC: Thomas Bogendoerfer \u003ctsbogend@alpha.franken.de\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "ae150435b59e68de00546330241727f2fec54517", "tree": "29a1cb71053306e8a8e0dff1f927d16a9a396917", "parents": [ "aa43c2158d5ae1dc76cccb08cd57a3ffd32c3825" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu May 12 20:21:07 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 20:04:03 2011 -0700" }, "message": "smsc: Move the SMC (SMSC) drivers\n\nMoves the SMC (SMSC) drivers into drivers/net/ethernet/smsc/ and the\nnecessary Kconfig and Makefile changes. Also did some cleanup\nof NET_VENDOR_SMC Kconfig tag for the 8390 based drivers.\n\nCC: Nicolas Pitre \u003cnico@fluxnic.net\u003e\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nCC: Erik Stahlman \u003cerik@vt.edu\u003e\nCC: Dustin McIntire \u003cdustin@sensoria.com\u003e\nCC: Steve Glendinning \u003csteve.glendinning@smsc.com\u003e\nCC: David Hinds \u003cdahinds@users.sourceforge.net\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "aa43c2158d5ae1dc76cccb08cd57a3ffd32c3825", "tree": "cdb471f2b2440d551e634f9cbeacf1675daf3ba8", "parents": [ "dee1ad47f2ee75f5146d83ca757c1b7861c34c3b" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Apr 08 19:06:30 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 20:03:49 2011 -0700" }, "message": "qlogic: Move the QLogic drivers\n\nMoves the QLogic drivers into drivers/net/ethernet/qlogic/ and\nthe necessary Kconfig and Makefile changes.\n\nCC: Ron Mercer \u003cron.mercer@qlogic.com\u003e\nCC: Amit Kumar Salecha \u003camit.salecha@qlogic.com\u003e\nCC: Anirban Chakraborty \u003canirban.chakraborty@qlogic.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Anirban Chakraborty \u003canirban.chakraborty@qlogic.com\u003e\n" }, { "commit": "dee1ad47f2ee75f5146d83ca757c1b7861c34c3b", "tree": "47cbdefe3d0f9b729724e378ad6a96eaddfd5fbc", "parents": [ "f7917c009c28c941ba151ee66f04dc7f6a2e1e0b" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Apr 07 07:42:33 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 20:03:27 2011 -0700" }, "message": "intel: Move the Intel wired LAN drivers\n\nMoves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and\nthe necessary Kconfig and Makefile changes.\n\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "f7917c009c28c941ba151ee66f04dc7f6a2e1e0b", "tree": "91cd66b3b846b1113654de2ac31f085d0d7989ba", "parents": [ "adfc5217e9db68d3f0cec8dd847c1a6d3ab549ee" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Apr 07 06:57:17 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 19:54:52 2011 -0700" }, "message": "chelsio: Move the Chelsio drivers\n\nMoves the drivers for the Chelsio chipsets into\ndrivers/net/ethernet/chelsio/ and the necessary Kconfig and Makefile\nchanges.\n\nCC: Divy Le Ray \u003cdivy@chelsio.com\u003e\nCC: Dimitris Michailidis \u003cdm@chelsio.com\u003e\nCC: Casey Leedom \u003cleedom@chelsio.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "adfc5217e9db68d3f0cec8dd847c1a6d3ab549ee", "tree": "4082ae79d2d4d40b39c9b5144b8171464b5f7eb2", "parents": [ "644570b830266ff33ff5f3542b9c838f93a55ea6" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Apr 07 06:03:04 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 19:54:39 2011 -0700" }, "message": "broadcom: Move the Broadcom drivers\n\nMoves the drivers for Broadcom devices into\ndrivers/net/ethernet/broadcom/ and the necessary Kconfig and Makefile\nchanges.\n\nCC: Eilon Greenstein \u003ceilong@broadcom.com\u003e\nCC: Michael Chan \u003cmchan@broadcom.com\u003e\nCC: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nCC: Gary Zambrano \u003czambrano@broadcom.com\u003e\nCC: \"Maciej W. Rozycki\" \u003cmacro@linux-mips.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "644570b830266ff33ff5f3542b9c838f93a55ea6", "tree": "b19c680ce1b1e4cd15465c74aa335459068c033f", "parents": [ "b955f6ca776f3bab3d1e2c5fb1d247b203cbda14" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Apr 02 06:20:12 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 19:54:25 2011 -0700" }, "message": "8390: Move the 8390 related drivers\n\nMoves the drivers for the National Semi-conductor 8390 chipset into\ndrivers/net/ethernet/8390/ and the necessary Kconfig and Makefile\nchanges.\n\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nCC: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\nCC: Alain Malek \u003calain.malek@cryogen.com\u003e\nCC: Peter De Schrijver \u003cp2@mind.be\u003e\nCC: \"David Huggins-Daines\" \u003cdhd@debian.org\u003e\nCC: Wim Dumon \u003cwimpie@kotnet.org\u003e\nCC: Yoshinori Sato \u003cysato@users.sourceforge.jp\u003e\nCC: David Hinds \u003cdahinds@users.sourceforge.net\u003e\nCC: Russell King \u003clinux@arm.linux.org.uk\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "b955f6ca776f3bab3d1e2c5fb1d247b203cbda14", "tree": "88e47fa3369f95c5673d4d654ae5f432cdc79048", "parents": [ "ca7a8e85262e93065b2a49dfb96a24d4a534a049" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Mar 30 07:46:36 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 19:54:11 2011 -0700" }, "message": "amd: Move AMD (Lance) chipset drivers\n\nMoves the drivers for the AMD chipsets into drivers/net/ethernet/amd/\nand the necessary Kconfig and Makfile changes.\n\nThe au1000 (Alchemy) driver was also moved into the same directory\neven though it is not a \"Lance\" driver.\n\nCC: Peter Maydell \u003cpmaydell@chiark.greenend.org.uk\u003e\nCC: Roman Hodek \u003cRoman.Hodek@informatik.uni-erlangen.de\u003e\nCC: \"Maciej W. Rozycki\" \u003cmacro@linux-mips.org\u003e\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nCC: Sam Creasey \u003csammy@users.qual.net\u003e\nCC: Miguel de Icaza \u003cmiguel@nuclecu.unam.mx\u003e\nCC: Thomas Bogendoerfer \u003ctsbogend@alpha.franken.de\u003e\nCC: Don Fry \u003cpcnet32@frontier.com\u003e\nCC: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCC: Russell King \u003clinux@arm.linux.org.uk\u003e\nCC: David Davies \u003cdavies@maniac.ultranet.com\u003e\nCC: \"M.Hipp\" \u003chippm@informatik.uni-tuebingen.de\u003e\nCC: Pete Popov \u003cppopov@embeddedalley.com\u003e\nCC: David Hinds \u003cdahinds@users.sourceforge.net\u003e\nCC: \"Roger C. Pao\" \u003crpao@paonet.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "ca7a8e85262e93065b2a49dfb96a24d4a534a049", "tree": "6fa505e3e6597548edd53b8faa559c6dff5a2bb8", "parents": [ "c1abc95b157fe4574919942018af143203ecca8e" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Mar 30 03:47:06 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 19:53:41 2011 -0700" }, "message": "3c*/acenic/typhoon: Move 3Com Ethernet drivers\n\nMoves the 3Com drivers into drivers/net/ethernet/3com/ and the necessary\nKconfig and Makefile changes.\n\nDid not move the following drivers becuase they use a non-3Com\nchipset: 3c503, 3c505, 3c507, 3c523 and 3c527\n\nCC: Steffen Klassert \u003cklassert@mathematik.tu-chemnitz.de\u003e\nCC: David Dillow \u003cdave@thedillows.org\u003e\nCC: Jes Sorensen \u003cjes@trained-monkey.org\u003e\nCC: Alan Cox \u003calan@linux.intel.com\u003e\nCC: David Hinds \u003cdahinds@users.sourceforge.net\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: David Dillow \u003cdave@thedillows.org\u003e\n" }, { "commit": "c1abc95b157fe4574919942018af143203ecca8e", "tree": "8cf88016bb3ed7c11a387bd2a20a8c3ecbacbc5c", "parents": [ "19fd61785a580c60cba900c5171bfadb57dd5056" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Tue Mar 29 18:25:21 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Aug 10 19:53:20 2011 -0700" }, "message": "drivers/net/ethernet: Add ethernet dir and config option\n\nThis is the initial patch to organize the drivers/net directory\nstructure and networking device driver config options. This patch\ndoes the following:\n - add drivers/net/ethernet/Kconfig\n - integrate the new files into the existing config\n\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9de79c127cccecb11ae6a21ab1499e87aa222880", "tree": "98173bcb0f620d078edc85f577b778b1f840ec3e", "parents": [ "19fd61785a580c60cba900c5171bfadb57dd5056" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Mon Aug 08 20:56:14 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Aug 09 21:47:14 2011 -0700" }, "message": "net: fix potential neighbour race in dst_ifdown()\n\nFollowup of commit f2c31e32b378a (fix NULL dereferences in\ncheck_peer_redir()).\n\nWe need to make sure dst neighbour doesnt change in dst_ifdown().\n\nFix some sparse errors.\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "19fd61785a580c60cba900c5171bfadb57dd5056", "tree": "1e491fb014be0dc03f4b6755bb94e73afd38c455", "parents": [ "57569d0e12eaf31717e295960cd2a26f626c8e5b", "8028837d71ba9904b17281b40f94b93e947fbe38" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 07 23:20:26 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 07 23:20:26 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net\n" }, { "commit": "8028837d71ba9904b17281b40f94b93e947fbe38", "tree": "9113cff86a93b3bd227e147768c7a54a0588121c", "parents": [ "cbc056602c7c63620c86904c431ff6b61e029dcc" ], "author": { "name": "Richard Cochran", "email": "richardcochran@gmail.com", "time": "Sat Aug 06 21:03:04 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 07 22:53:22 2011 -0700" }, "message": "dp83640: increase receive time stamp buffer size\n\nThe dp83640 buffers receive time stamps from special PHY status frames,\nmatching them to received PTP packets in a work queue. Because the timeout\nfor orphaned time stamps is so long and the buffer is so small, the driver\ncan drop time stamps under moderate PTP traffic.\n\nThis commit fixes the issue by decreasing the timeout to (at least) one\ntimer tick and increasing the buffer size.\n\nSigned-off-by: Richard Cochran \u003crichard.cochran@omicron.at\u003e\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" } ], "next": "cbc056602c7c63620c86904c431ff6b61e029dcc" }