)]}'
{
  "log": [
    {
      "commit": "10d8493cd9efd38b1947b7a74276dbdc8311aa1a",
      "tree": "69caa6570a2582667783dd03c8ce5c204881f398",
      "parents": [
        "4ac887cfdad909f16ee1886fe4fa19b452fc7fd3"
      ],
      "author": {
        "name": "Arend van Spriel",
        "email": "arend@broadcom.com",
        "time": "Tue Mar 06 15:50:48 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Mar 06 15:16:18 2012 -0500"
      },
      "message": "bcma: add support for on-chip OTP memory used for SPROM storage\n\nWireless Broadcom chips can have either their SPROM data stored\non either external SPROM or on-chip OTP memory. Both are accessed\nthrough the same register space. This patch adds support for the\non-chip OTP memory.\n\nTested with:\nBCM43224 OTP and SPROM\nBCM4331 SPROM\nBCM4313 OTP\n\nThis patch is in response to linux-wireless thread [1].\n\n[1] http://article.gmane.org/gmane.linux.kernel.wireless.general/85426\n\nTested-by: Saul St. John \u003csaul.stjohn@gmail.com\u003e\nTested-by: Rafal Milecki \u003czajec5@gmail.com\u003e\nTested-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nCc: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: Arend van Spriel \u003carend@broadcom.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "a027237a56f7d519eee5749cfb720e568d0bb0b6",
      "tree": "0d408171f47086b66330a844701747d8aa0e37fc",
      "parents": [
        "1c9351cf2180924c91bb85e5ba607f24a3d875b1"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Tue Feb 28 00:56:10 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Mar 05 15:20:50 2012 -0500"
      },
      "message": "bcma: add support for sprom not found on the device\n\nOn SoCs the sprom is stored in the nvram in a special partition on the\nflash chip. The nvram contains the sprom for the main bus, but\nsometimes also for a pci devices using bcma. This patch makes it\npossible for the arch code to register a function to fetch the needed\nsprom from the nvram and provide it to the bcma code.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "1c9351cf2180924c91bb85e5ba607f24a3d875b1",
      "tree": "4e09e2efb552bf11454912b817d8d81c4430670f",
      "parents": [
        "52aa63f5322aab23e07a52ff8ddd246d34799eb5"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Tue Feb 28 00:56:09 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Mar 05 15:20:50 2012 -0500"
      },
      "message": "bcma: export bcma_find_core\n\nThis function is needed by the bcm47xx arch code to get the number of\nthe ieee80211 core.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "d6865dcc58f252480515101fd13532f0fc420b53",
      "tree": "4e8ee3ef60d44b81d31337925c018f19929ea7f5",
      "parents": [
        "8f9ada4fa1926e540b1562cb9bacb3e51a698c35"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Tue Jan 31 00:03:37 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 06 14:53:06 2012 -0500"
      },
      "message": "bcma: add extra sprom check\n\nThis check is needed on the BCM43224 device as it says in the\ncapabilities it has an sprom but is extra check says it has not.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "8f9ada4fa1926e540b1562cb9bacb3e51a698c35",
      "tree": "def07cbceee8d55da9288ab1157835d784360805",
      "parents": [
        "49dc9577155576b10ff79f0c1486c816b01f58bf"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Tue Jan 31 00:03:36 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 06 14:53:05 2012 -0500"
      },
      "message": "bcma: add bus num counter\n\nIf we have two bcma buses on one computer the second will not work\nwithout this patch. Now each bus gets an own number.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "49dc9577155576b10ff79f0c1486c816b01f58bf",
      "tree": "c193e6110c54234ab5ed3d816cc2dc15df165f37",
      "parents": [
        "d1a7a8e1d367e34e5adce91f48cae07dc08d9e6c"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Tue Jan 31 00:03:35 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 06 14:53:04 2012 -0500"
      },
      "message": "bcma: add PCIe host controller\n\nSome SoCs have a PCIe host controller to make it possible to attach\nsome other devices to it, like an other Wifi card.\nThis code was tested with an Netgear WNDR3400 (bcm4716 based), but\nshould work with all bcma based SoCs.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "d1a7a8e1d367e34e5adce91f48cae07dc08d9e6c",
      "tree": "b4e279942e10a4bfc51e6bfeef052c3cca088964",
      "parents": [
        "4b259a5cc5ea967fa243dfc1f95a59ae74106f5b"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Tue Jan 31 00:03:34 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 06 14:53:03 2012 -0500"
      },
      "message": "bcma: make some functions __devinit\n\nbcma_core_pci_hostmode_init() has to be in __devinit as it will call a\nfunction in that section and so all functions calling it also have to\nbe in __devinit.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "2be25cac8402fab56bb51166f464d1b420bcf744",
      "tree": "ec50aa8592b81476adff3bc77779a4a08e1eb9e1",
      "parents": [
        "5f2d6171e1e70584b9819771443485750453fd16"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Tue Jan 31 00:03:32 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 06 14:52:56 2012 -0500"
      },
      "message": "bcma: add constants for PCI and use them\n\nThere are many magic numbers used in the PCIe code. Replace them with\nsome constants from the Broadcom SDK and also use them in the pcie host\ncontroller.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "5f2d6171e1e70584b9819771443485750453fd16",
      "tree": "29a8f4dfc08d8cef4c5f3b13e0a78c52b61abe1e",
      "parents": [
        "268bd858df5052f97722b123e990119c89171fd7"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Tue Jan 31 00:03:31 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 06 14:50:39 2012 -0500"
      },
      "message": "bcma: add the core unit number\n\nSome SoCs have two pcie or gmac cores and we need to know the number of\nthe specific core on the bus. This is the case for the BCM4706.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "7d5869e78f4c9d32f834dadefbb7dcb3c9d4d85f",
      "tree": "136560d132409e801be0c0e0ba00da7ea9695d05",
      "parents": [
        "685a4ef0df23b97eea1842c2698da9a2e35fc976"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Jan 13 23:58:41 2012 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Jan 17 09:54:08 2012 -0500"
      },
      "message": "bcma: connect the bcma bus suspend/resume to the bcma driver suspend/resume\n\nNow the low-level driver actually gets informed that it is getting suspended and resumed.\n\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "084455524f0d46dd210b4397898aff73579b97e8",
      "tree": "a3442d404394c8525965a30097238e5b66540427",
      "parents": [
        "9d08f10d355afd500310738ff09b4d921a447102"
      ],
      "author": {
        "name": "Arend van Spriel",
        "email": "arend@broadcom.com",
        "time": "Thu Dec 08 15:06:42 2011 -0800"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Dec 13 15:31:27 2011 -0500"
      },
      "message": "bcma: use static keyword for inline function declaration in bcma.h\n\nJust scratching an itch here, but it makes more sense to use the\nstatic keyword if you think about how the compiler treats inline\nfunctions.\n\nReviewed-by: Pieter-Paul Giesberts \u003cpieterpg@broadcom.com\u003e\nReviewed-by: Alwin Beukers \u003calwin@broadcom.com\u003e\nSigned-off-by: Arend van Spriel \u003carend@broadcom.com\u003e\nSigned-off-by: Franky Lin \u003cfrankyl@broadcom.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "9d08f10d355afd500310738ff09b4d921a447102",
      "tree": "85748639950c04f299d81c784eb68a059ee7c449",
      "parents": [
        "ffb2756511a90091185e9be0652cc10eee0890d0"
      ],
      "author": {
        "name": "Arend van Spriel",
        "email": "arend@broadcom.com",
        "time": "Thu Dec 08 15:06:41 2011 -0800"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Dec 13 15:31:24 2011 -0500"
      },
      "message": "bcma: add set/mask macros for 16-bit register access\n\nThe BCMA header only had definitions for 32-bit register access. Used\nthose as a template for the 16-bit flavour. Also changed them to inline\nfunctions to be on the safe side. As offset parameter is used twice there\nwould be a problem when used like this: bcma_set32(core, offset++, val);\n\nReviewed-by: Pieter-Paul Giesberts \u003cpieterpg@broadcom.com\u003e\nReviewed-by: Alwin Beukers \u003calwin@broadcom.com\u003e\nSigned-off-by: Arend van Spriel \u003carend@broadcom.com\u003e\nSigned-off-by: Franky Lin \u003cfrankyl@broadcom.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "aee5ed563d56c713d2a51d6f16e08b83fd9665d5",
      "tree": "f647a9745a4640f9e11eebe414d9e109fb9d79b2",
      "parents": [
        "8a5ac6ecd56756ee72588627aa23ab6cf9b790db"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Thu Dec 08 18:02:22 2011 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Dec 13 15:30:52 2011 -0500"
      },
      "message": "bcma: extract FEM info from SPROM\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "eb5589a8f0dab7e29021344228856339e6a1249c",
      "tree": "d83790e5ac7feacba5b1832fbe7f8d2a39d76f65",
      "parents": [
        "7c926402a7e8c9b279968fd94efec8700ba3859e"
      ],
      "author": {
        "name": "Paul Gortmaker",
        "email": "paul.gortmaker@windriver.com",
        "time": "Fri May 27 09:02:11 2011 -0400"
      },
      "committer": {
        "name": "Paul Gortmaker",
        "email": "paul.gortmaker@windriver.com",
        "time": "Mon Oct 31 19:32:32 2011 -0400"
      },
      "message": "include: convert various register fcns to macros to avoid include chaining\n\nThe original implementations reference THIS_MODULE in an inline.\nWe could include \u003clinux/export.h\u003e, but it is better to avoid chaining.\n\nFortunately someone else already thought of this, and made a similar\ninline into a #define in \u003clinux/device.h\u003e for device_schedule_callback(),\n[see commit 523ded71de0] so follow that precedent here.\n\nAlso bubble up any __must_check that were used on the prev. wrapper inline\nfunctions up one to the real __register functions, to preserve any prev.\nsanity checks that were used in those instances.\n\nSigned-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\n"
    },
    {
      "commit": "3861b2c5d90b219ee772b5a1d1a32ee630564121",
      "tree": "695674bb297eadac2a8b4afa4c463b61b3e05800",
      "parents": [
        "7cc44ed48d0ec0937c1f098642540b6c9ca38de5"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Fri Sep 16 12:33:58 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Sep 19 16:10:11 2011 -0400"
      },
      "message": "bcma: cc: export more control functions\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "984e5befbafe2799be28c2209226a82fb3a3be7a",
      "tree": "a43f9648318a32724e5f5ed3204954f77bbdf024",
      "parents": [
        "17030f48e31adde5b043741c91ba143f5f7db0fd"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Thu Aug 11 23:46:44 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Aug 22 14:45:59 2011 -0400"
      },
      "message": "bcma: implement BCM4331 workaround for external PA lines\n\nWe need to disable ext. PA lines for reading SPROM. It\u0027s disabled by\ndefault, but this patch allows using bcma after loading wl, which leaves\nworkaround enabled.\n\nCc: Arend van Spriel \u003carend@broadcom.com\u003e\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "908debc8da0d5a91418f71c6a462f62bd2ac69ef",
      "tree": "886072e213b3a67650a53574be916ec105d15b61",
      "parents": [
        "e3afe0e5be7576ac1282ea9fbbc9b352bb379227"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Sat Jul 23 01:20:11 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Aug 08 14:29:29 2011 -0400"
      },
      "message": "bcma: get CPU clock\n\nAdd method to return the clock of the CPU. This is needed by the arch\ncode to calculate the mips_hpt_frequency.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "e3afe0e5be7576ac1282ea9fbbc9b352bb379227",
      "tree": "0b74e8bd5e45b2d50f9fa2033674a00aeac5f6ae",
      "parents": [
        "21e0534ad7415559bb8dee0dc00e39646fed83c9"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Sat Jul 23 01:20:10 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Aug 08 14:29:28 2011 -0400"
      },
      "message": "bcma: add serial console support\n\nThis adds support for serial console to bcma, when operating on an SoC.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "21e0534ad7415559bb8dee0dc00e39646fed83c9",
      "tree": "e9e082dfdf6ce9798d6201f1ae4109b68b11920a",
      "parents": [
        "ecd177c21640e92b059a71139f5850243a8f0942"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Sat Jul 23 01:20:09 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Aug 08 14:29:26 2011 -0400"
      },
      "message": "bcma: add mips driver\n\nThis adds a mips driver to bcma. This is only found on embedded\ndevices. For now the driver just initializes the irqs used on this\nsystem.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "ecd177c21640e92b059a71139f5850243a8f0942",
      "tree": "70ed92f7b63087bec0a6036dca1c81403d65c86d",
      "parents": [
        "517f43e5a922d51ac960424de4f72676fe6a7390"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Sat Jul 23 01:20:08 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Aug 08 14:29:25 2011 -0400"
      },
      "message": "bcma: add SOC bus\n\nThis patch adds support for using bcma on a Broadcom SoC as the system\nbus. An SoC like the bcm4716 could register this bus and use it to\nsearches for the bcma cores and register the devices on this bus.\n\nBCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC\nis a better name.\n\nAcked-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "517f43e5a922d51ac960424de4f72676fe6a7390",
      "tree": "02920911d43c4e480ac0eba21c15587776b16d6b",
      "parents": [
        "67a5c29e1623edda5ff3f0355af533e72a245ad9"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Sat Jul 23 01:20:07 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Aug 08 14:29:24 2011 -0400"
      },
      "message": "bcma: add functions to scan cores needed on SoCs\n\nThe chip common and mips core have to be setup early in the boot\nprocess to get the cpu clock.\nbcma_bus_early_register() gets pointers to some space to store the core\ndata and searches for the chip common and mips core and initializes\nchip common. After that was done and the kernel is out of early boot we\njust have to run bcma_bus_register() and it will search for the other\ncores, initialize and register them.\nThe cores are getting the same numbers as before.\n\nAcked-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "05aec233367262a43dbf0b615099757162e36f88",
      "tree": "cbfd96e2909dac94177db4e9b57c91056c2ad3a8",
      "parents": [
        "a9770a815d280d6aa2da406e159eff92b880670e"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Wed Jul 20 19:52:15 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jul 22 09:51:12 2011 -0400"
      },
      "message": "bcma: inform drivers about translation bits needed for the core\n\nWhen using DMA, drivers need to pass special translation info to the\nhardware.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "6f53912fc317ab130bd910c5c30420a21ea38115",
      "tree": "780ce23098e2cc10eb43eede985f1f64ae6bcda7",
      "parents": [
        "7424dd0d03502b9844b96bf6efd0716b79c36607"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Sun Jul 17 01:06:05 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Jul 19 17:03:11 2011 -0400"
      },
      "message": "bcma: allow enabling PLL\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "7424dd0d03502b9844b96bf6efd0716b79c36607",
      "tree": "936de32a86d93664e79e2ec6697d19bd69e1a204",
      "parents": [
        "3de1a7748f68c63daed7c9e04ac9f048efcd9f20"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Sun Jul 17 01:06:04 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Jul 19 17:03:11 2011 -0400"
      },
      "message": "bcma: allow setting FAST clockmode for a core\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "3de1a7748f68c63daed7c9e04ac9f048efcd9f20",
      "tree": "12c9ab00cfa806f8a8f24648013c454a5385f040",
      "parents": [
        "bb932ad9805029af18232ffe5603fbc68e1c1fb6"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Sun Jul 17 01:06:03 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Jul 19 17:03:09 2011 -0400"
      },
      "message": "bcma: trivial: add helpers for masking/setting\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "bb932ad9805029af18232ffe5603fbc68e1c1fb6",
      "tree": "617b1abbfb00f517aa749b157cca642f30a6c433",
      "parents": [
        "2729df25550f041940f23c11ee8252094a6bd44b"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Sat Jul 16 18:43:36 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Jul 19 17:03:08 2011 -0400"
      },
      "message": "bcma: move define of BCMA_CLKCTLST register\n\nRecent experiments have shown many cores share 0x1E0 register used for\nclock management.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "2b5e3322b8bff484cb206e7920c6034663d37b87",
      "tree": "cb92fbc8758b0866f3e76f077c744261b9a34c4e",
      "parents": [
        "856799d58274bfa6a57bc80051ee1cefdb6b041f"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Mon Jul 18 02:01:28 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Jul 19 16:49:54 2011 -0400"
      },
      "message": "bcma: define IO status register\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "eb1577b7c4b2cdd0e18b0d5d8e940e36329215e5",
      "tree": "0a6134bf849eb48c06692573504ad5f511d6c9cd",
      "parents": [
        "b473bc176702cb22529632b5c4315bda27e0d979"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Sun Jul 17 11:00:59 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Jul 19 16:49:53 2011 -0400"
      },
      "message": "bcma: handle alternative SPROM location\n\nSome cards do not use additional 0x30 offset for SPROM location. We do\nnot know the real condition for it yet, make it BCM4331 specific for\nnow.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "440ca98fe8407808a9ad8e934f6e28408f546313",
      "tree": "4c7ea568458a0e9327b7283cf370de1106446351",
      "parents": [
        "536e5189ffdf17047f129f4730d947ab11a8526b"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Sat Jun 18 01:01:59 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Jun 20 15:34:19 2011 -0400"
      },
      "message": "bcma: clean exports of functions\n\nFunction managing IRQs is needed for external drivers like b43.\nOn the other side we do not expect writing any hosts drivers outside of\nbcma, so this is safe to do not export functions related to this.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "e3ae0cac00042d7fb76914c30c5f991f918e65b4",
      "tree": "11409e2b18d9f0bf52609c1ddd57bdaffc4709c2",
      "parents": [
        "5b49b35a671e59c16c33611ea2d5650438388663"
      ],
      "author": {
        "name": "Arend van Spriel",
        "email": "arend@broadcom.com",
        "time": "Thu Jun 09 20:07:20 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jun 10 14:57:53 2011 -0400"
      },
      "message": "drivers: bcma: export bcma_core_disable() function\n\nIn the brcm80211 driver we disable the 80211 core when the driver is\n\u0027down\u0027. The bcma_core_disable() function exactly does the same as\nour implementation so exporting this function makes sense.\n\nCc: linux-wireless@vger.kernel.org\nCc: Rafal Milecki \u003czajec5@gmail.com\u003e\nSigned-off-by: Arend van Spriel \u003carend@broadcom.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "27f18dc2dafe66a93c7101fc94201b8c83903597",
      "tree": "4600db64c653cfc74d427fc26b7f94ef8fb5db28",
      "parents": [
        "4da909e7b572b561d8150f9d41b04bcfff386222"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Thu Jun 02 02:08:51 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jun 03 15:01:07 2011 -0400"
      },
      "message": "bcma: read SPROM and extract MAC from it\n\nIn case of BCMA cards SPROM is located in the ChipCommon core, it is\nnot mapped as separated host window. So far we have met only SPROMs rev\n8.\nSPROM layout seems to be the same as for SSB buses, so we decided to\nshare SPROM struct and some defines.\nFor now we extract MAC address only, this can be improved of course.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "9d75ef0f8f6d2e31ed940b3057a42a25f07076fb",
      "tree": "712c09addf9f229bf25593e6f9f8a8d7d6d94859",
      "parents": [
        "505fb019d4924e425bb1024eb603a7bc7fe7fe63"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Fri May 20 03:27:06 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Jun 01 15:12:28 2011 -0400"
      },
      "message": "bcma: host pci: implement block R/W operations\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "1bdcd095e39a789135f8638a2ff76f74e3071d46",
      "tree": "8537cc55020c878f8f034689849e31856be135aa",
      "parents": [
        "24ca39d67968c42d377abc122f6dca635ebcdb79"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Wed May 18 11:40:22 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Jun 01 15:10:58 2011 -0400"
      },
      "message": "bcma: add IRQ number and pointer to DMA dev\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "1073e4ee595265086a592a056d903bf4fcc8885a",
      "tree": "1cd9726f80abf3625df6ac7c31ffd68087c7bff1",
      "parents": [
        "f59a59fea3be78c2bda23cb7f55225b33c502c3c"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Wed May 11 02:08:09 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed May 11 14:50:41 2011 -0400"
      },
      "message": "bcma: add missing GPIO defines, use PULL register only when available\n\nSimilar patch was commited to ssb.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "8369ae33b705222aa05ab53c7d6b4458f4ed161b",
      "tree": "ce5d592a63134f1283473bc900bf59489b92d8eb",
      "parents": [
        "306fe9384f06d31219778cece2d3c646146e7bb6"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Mon May 09 18:56:46 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue May 10 15:54:54 2011 -0400"
      },
      "message": "bcma: add Broadcom specific AMBA bus driver\n\nBroadcom has released cards based on a new AMBA-based bus type. From a\nprogramming point of view, this new bus type differs from AMBA and does\nnot use AMBA common registers. It also differs enough from SSB. We\ndecided that a new bus driver is needed to keep the code clean.\n\nIn its current form, the driver detects devices present on the bus and\nregisters them in the system. It allows registering BCMA drivers for\nspecified bus devices and provides them basic operations. The bus driver\nitself includes two important bus managing drivers: ChipCommon core\ndriver and PCI(c) core driver. They are early used to allow correct\ninitialization.\n\nCurrently code is limited to supporting buses on PCI(e) devices, however\nthe driver is designed to be used also on other hosts. The host\nabstraction layer is implemented and already used for PCI(e).\n\nSupport for PCI(e) hosts is working and seems to be stable (access to\n80211 core was tested successfully on a few devices). We can still\noptimize it by using some fixed windows, but this can be done later\nwithout affecting any external code. Windows are just ranges in MMIO\nused for accessing cores on the bus.\n\nCc: Greg KH \u003cgreg@kroah.com\u003e\nCc: Michael Büsch \u003cmb@bu3sch.de\u003e\nCc: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: George Kashperko \u003cgeorge@znau.edu.ua\u003e\nCc: Arend van Spriel \u003carend@broadcom.com\u003e\nCc: linux-arm-kernel@lists.infradead.org\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Arnd Bergmann \u003carnd@arndb.de\u003e\nCc: Andy Botting \u003candy@andybotting.com\u003e\nCc: linuxdriverproject \u003cdevel@linuxdriverproject.org\u003e\nCc: linux-kernel@vger.kernel.org \u003clinux-kernel@vger.kernel.org\u003e\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    }
  ]
}