)]}'
{
  "log": [
    {
      "commit": "7d12e780e003f93433d49ce78cfedf4b4c52adc5",
      "tree": "6748550400445c11a306b132009f3001e3525df8",
      "parents": [
        "da482792a6d1a3fbaaa25fae867b343fb4db3246"
      ],
      "author": {
        "name": "David Howells",
        "email": "dhowells@redhat.com",
        "time": "Thu Oct 05 14:55:46 2006 +0100"
      },
      "committer": {
        "name": "David Howells",
        "email": "dhowells@warthog.cambridge.redhat.com",
        "time": "Thu Oct 05 15:10:12 2006 +0100"
      },
      "message": "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers\n\nMaintain a per-CPU global \"struct pt_regs *\" variable which can be used instead\nof passing regs around manually through all ~1800 interrupt handlers in the\nLinux kernel.\n\nThe regs pointer is used in few places, but it potentially costs both stack\nspace and code to pass it around.  On the FRV arch, removing the regs parameter\nfrom all the genirq function results in a 20% speed up of the IRQ exit path\n(ie: from leaving timer_interrupt() to leaving do_IRQ()).\n\nWhere appropriate, an arch may override the generic storage facility and do\nsomething different with the variable.  On FRV, for instance, the address is\nmaintained in GR28 at all times inside the kernel as part of general exception\nhandling.\n\nHaving looked over the code, it appears that the parameter may be handed down\nthrough up to twenty or so layers of functions.  Consider a USB character\ndevice attached to a USB hub, attached to a USB controller that posts its\ninterrupts through a cascaded auxiliary interrupt controller.  A character\ndevice driver may want to pass regs to the sysrq handler through the input\nlayer which adds another few layers of parameter passing.\n\nI\u0027ve build this code with allyesconfig for x86_64 and i386.  I\u0027ve runtested the\nmain part of the code on FRV and i386, though I can\u0027t test most of the drivers.\nI\u0027ve also done partial conversion for powerpc and MIPS - these at least compile\nwith minimal configurations.\n\nThis will affect all archs.  Mostly the changes should be relatively easy.\nTake do_IRQ(), store the regs pointer at the beginning, saving the old one:\n\n\tstruct pt_regs *old_regs \u003d set_irq_regs(regs);\n\nAnd put the old one back at the end:\n\n\tset_irq_regs(old_regs);\n\nDon\u0027t pass regs through to generic_handle_irq() or __do_IRQ().\n\nIn timer_interrupt(), this sort of change will be necessary:\n\n\t-\tupdate_process_times(user_mode(regs));\n\t-\tprofile_tick(CPU_PROFILING, regs);\n\t+\tupdate_process_times(user_mode(get_irq_regs()));\n\t+\tprofile_tick(CPU_PROFILING);\n\nI\u0027d like to move update_process_times()\u0027s use of get_irq_regs() into itself,\nexcept that i386, alone of the archs, uses something other than user_mode().\n\nSome notes on the interrupt handling in the drivers:\n\n (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in\n     the input_dev struct.\n\n (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does\n     something different depending on whether it\u0027s been supplied with a regs\n     pointer or not.\n\n (*) Various IRQ handler function pointers have been moved to type\n     irq_handler_t.\n\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\n(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)\n"
    },
    {
      "commit": "7282d491ecaee9883233a0e27283c4c79486279a",
      "tree": "172ffa70716f5493db57976ceef7652120b3332f",
      "parents": [
        "76fd85937097a0c2ec8ab23bf21dc10992d1c398"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Wed Sep 13 14:30:00 2006 -0400"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Wed Sep 13 14:30:00 2006 -0400"
      },
      "message": "drivers/net: const-ify ethtool_ops declarations\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "6aa20a2235535605db6d6d2bd850298b2fe7f31e",
      "tree": "df0b855043407b831d57f2f2c271f8aab48444f4",
      "parents": [
        "7a291083225af6e22ffaa46b3d91cfc1a1ccaab4"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Wed Sep 13 13:24:59 2006 -0400"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Wed Sep 13 13:24:59 2006 -0400"
      },
      "message": "drivers/net: Trim trailing whitespace\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "4e83b7fad8d3fd55828baa4510885c7362e66a26",
      "tree": "eb3f28516c05a945f2e9c8003e5864de4e0763bc",
      "parents": [
        "c925f1ea9ec20a95d46f57810f4a4d69db74580e",
        "d5b20697ca37d80cc4ec2ba3c5ddf1339dc1d49a"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Tue Sep 12 11:45:33 2006 -0400"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Tue Sep 12 11:45:33 2006 -0400"
      },
      "message": "Merge branch \u0027tmp\u0027 into upstream\n"
    },
    {
      "commit": "d5b20697ca37d80cc4ec2ba3c5ddf1339dc1d49a",
      "tree": "a5fa98145b1d95b84357157856517de8d0e31edf",
      "parents": [
        "05ff0e291af086f4325bac76abad250690bbbd63"
      ],
      "author": {
        "name": "Andy Gospodarek",
        "email": "andy@greyhouse.net",
        "time": "Mon Sep 11 17:39:18 2006 -0400"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Tue Sep 12 11:45:19 2006 -0400"
      },
      "message": "[PATCH] Remove more unnecessary driver printk\u0027s\n\nAs I promised last week, here is the first pass at removing all\nunnecessary printk\u0027s that exist in network device drivers currently in\npromiscuous mode.  The duplicate messages are not needed so they have\nbeen removed.  Some of these drivers are quite old and might not need an\nupdate, but I did them all anyway.\n\nI am currently auditing the remaining conditional printk\u0027s and will send\nout a patch for those soon.\n\nSigned-off-by: Andy Gospodarek \u003candy@greyhouse.net\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "299176206b266f204be859adf9e66efd06628ab2",
      "tree": "e25d9ee1c43940e00e70124a18d869a75de543ab",
      "parents": [
        "5243a37b7991c85e3ea3afb6e3e13eea7ec2927d"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Sat Aug 19 17:48:59 2006 -0400"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Sat Aug 19 17:48:59 2006 -0400"
      },
      "message": "drivers/net: Remove deprecated use of pci_module_init()\n\nFrom: Michal Piotrowski \u003cmichal.k.k.piotrowski@gmail.com\u003e\n\nSigned-off-by: Michal Piotrowski \u003cmichal.k.k.piotrowski@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "03a8c6611aa18f919f8700b18f925e9008b616a8",
      "tree": "312336afb3a3ddbffe1633e512fa616cbbc07be7",
      "parents": [
        "36e1e84768b1123eb632aff153104855c71684cc"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Tue Jun 27 07:57:22 2006 -0400"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Wed Jul 05 13:40:49 2006 -0400"
      },
      "message": "[netdrvr] Remove Linux-specific changelogs from several Becker template drivers\n\nWhen in-kernel net drivers branched from Donald Becker\u0027s vanilla driver\nset, in the days before BitKeeper and git, a driver changelog was\nmaintained in the driver source code.  These days, the kernel\u0027s\nchangelog is far superior and much more accurate, so the in-driver\nchangelogs are removed.\n\nAnother relic of the Becker/kernel split was version numbering, using\n\"foo-LKx.y.z\" notation, resulting in weird version numbers like\n\"1.17b-LK1.1.9\".  These drivers are for older hardware, and see few\nchanges these days, so the version numbers were all bumped to something\nmore simple.\n\nFinally, in xircom_tulip_cb specifically, an additional cleanup removes\nthe always-enabled CARDBUS cpp macro.\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "1fb9df5d3069064c037c81c0ab8bf783ffa5e373",
      "tree": "23028cfd5b98a72fcf12256fac4bc0c68181f2c4",
      "parents": [
        "dace145374b8e39aeb920304c358ab5e220341ab"
      ],
      "author": {
        "name": "Thomas Gleixner",
        "email": "tglx@linutronix.de",
        "time": "Sat Jul 01 19:29:39 2006 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Sun Jul 02 13:58:51 2006 -0700"
      },
      "message": "[PATCH] irq-flags: drivers/net: Use the new IRQF_ constants\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7",
      "tree": "6d98881fe91fd9583c109208d5c27131b93fa248",
      "parents": [
        "e02169b682bc448ccdc819dc8639ed34a23cedd8"
      ],
      "author": {
        "name": "Jörn Engel",
        "email": "joern@wohnheim.fh-wedel.de",
        "time": "Fri Jun 30 19:25:36 2006 +0200"
      },
      "committer": {
        "name": "Adrian Bunk",
        "email": "bunk@stusta.de",
        "time": "Fri Jun 30 19:25:36 2006 +0200"
      },
      "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n"
    },
    {
      "commit": "a2b524b2ec6caa0499aea56a58fdb67a6d10db90",
      "tree": "4297b0a3e27688ef30a627dc062303a378897452",
      "parents": [
        "5a40f09baa3d74e9e6f1bd86a9998a10fbba012a"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Mon Jun 26 22:48:38 2006 -0400"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Mon Jun 26 22:48:38 2006 -0400"
      },
      "message": "[netdrvr] natsemi: minor cleanups\n\n* make eeprom size a variable, prepping for future patch\n* eliminate unused PCI_xxx stuff left over from Becker driver template\n* convert a few #defines to enum\n* mark PCI table const, __devinitdata\n* don\u0027t bother with named constant for PCI device id\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "5a40f09baa3d74e9e6f1bd86a9998a10fbba012a",
      "tree": "08a8943bc42fe54d1bf12ea945587377b9559371",
      "parents": [
        "467c432a4d63349025d92f5dbdd0b9ba8ff40fd5"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Mon Jun 26 22:24:03 2006 -0400"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Mon Jun 26 22:24:03 2006 -0400"
      },
      "message": "[netdrvr] natsemi: Separate out media initialization code\n\nThis makes it easier to merge an upcoming patch, and overall makes the\ncode a bit more clean.\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "932ff279a43ab7257942cddff2595acd541cc49b",
      "tree": "e60130673a20d71becdac858c2589d8dfbf3ae1f",
      "parents": [
        "bf0857ea32addb6bc8b46383604b218b8ec09f19"
      ],
      "author": {
        "name": "Herbert Xu",
        "email": "herbert@gondor.apana.org.au",
        "time": "Fri Jun 09 12:20:56 2006 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Sat Jun 17 21:30:14 2006 -0700"
      },
      "message": "[NET]: Add netif_tx_lock\n\nVarious drivers use xmit_lock internally to synchronise with their\ntransmission routines.  They do so without setting xmit_lock_owner.\nThis is fine as long as netpoll is not in use.\n\nWith netpoll it is possible for deadlocks to occur if xmit_lock_owner\nisn\u0027t set.  This is because if a printk occurs while xmit_lock is held\nand xmit_lock_owner is not set can cause netpoll to attempt to take\nxmit_lock recursively.\n\nWhile it is possible to resolve this by getting netpoll to use\ntrylock, it is suboptimal because netpoll\u0027s sole objective is to\nmaximise the chance of getting the printk out on the wire.  So\ndelaying or dropping the message is to be avoided as much as possible.\n\nSo the only alternative is to always set xmit_lock_owner.  The\nfollowing patch does this by introducing the netif_tx_lock family of\nfunctions that take care of setting/unsetting xmit_lock_owner.\n\nI renamed xmit_lock to _xmit_lock to indicate that it should not be\nused directly.  I didn\u0027t provide irq versions of the netif_tx_lock\nfunctions since xmit_lock is meant to be a BH-disabling lock.\n\nThis is pretty much a straight text substitution except for a small\nbug fix in winbond.  It currently uses\nnetif_stop_queue/spin_unlock_wait to stop transmission.  This is\nunsafe as an IRQ can potentially wake up the queue.  So it is safer to\nuse netif_tx_disable.\n\nThe hamradio bits used spin_lock_irq but it is unnecessary as\nxmit_lock must never be taken in an IRQ handler.\n\nSigned-off-by: Herbert Xu \u003cherbert@gondor.apana.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "e19360f2945f54eb44ae170ec9c33910d29834a2",
      "tree": "c9959bb3d5a91efd21ca43c556544a7b0c1842bc",
      "parents": [
        "037998d1e979e88a140ef32c5d28730f6ca8a96f"
      ],
      "author": {
        "name": "Randy Dunlap",
        "email": "rdunlap@xenotime.net",
        "time": "Mon Apr 10 23:22:06 2006 -0700"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Wed Apr 12 18:08:45 2006 -0400"
      },
      "message": "[PATCH] net drivers: fix section attributes for gcc\n\nIf CONFIG_HOTPLUG\u003dn, gcc doesn\u0027t like some __initdata to be const (rodata)\nand other __initdata not const, so make the non-const __initdata const.\n\ngcc errors:\ndrivers/net/bnx2.c:66: error: version causes a section type conflict\ndrivers/net/starfire.c:338: error: version causes a section type conflict\ndrivers/net/typhoon.c:137: error: version causes a section type conflict\ndrivers/net/natsemi.c:241: error: version causes a section type conflict\n\nSigned-off-by: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "a8b4cf42cf57e44e3c4a585e0f0a71e3a7efbf29",
      "tree": "ba3bcaea18d88f12297d3302dd1c9a1b9cec4709",
      "parents": [
        "8dfc914a3f2ae4e303e2bff89f28fc14cee8a9a6"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@sirena.org.uk",
        "time": "Tue Mar 28 14:08:55 2006 -0800"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Wed Mar 29 17:34:02 2006 -0500"
      },
      "message": "[PATCH] natsemi: Support oversized EEPROMs\n\nThe natsemi chip can have a larger EEPROM attached than it itself uses for\nconfiguration.  This patch adds support for user space access to such an\nEEPROM.\n\nSigned-off-by: Mark Brown \u003cbroonie@sirena.org.uk\u003e\nCc: Tim Hockin \u003cthockin@hockin.org\u003e\nCc: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "e72fd96e8ee3ff4dd80757172a4fe49bd92fea9c",
      "tree": "2b544e905888845f7115c3302156119ac627d340",
      "parents": [
        "b27a16b7c4738ea16f6f0730caf382a3f57317bb"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@sirena.org.uk",
        "time": "Thu Feb 02 00:00:02 2006 +0000"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Sat Mar 04 12:14:56 2006 -0500"
      },
      "message": "[PATCH] natsemi: NAPI and a bugfix\n\nAs documented in National application note 1287 the RX state machine on\nthe natsemi chip can lock up under some conditions (mostly related to\nheavy load).  When this happens a series of bogus packets are reported\nby the chip including some oversized frames prior to the final lockup.\n\nThis patch implements the fix from the application note: when an\noversized packet is reported it resets the RX state machine, dropping\nany currently pending packets.\n\nSigned-off-by: Mark Brown \u003cbroonie@sirena.org.uk\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "b27a16b7c4738ea16f6f0730caf382a3f57317bb",
      "tree": "e4e881b1b0e17d3c592073d0e8aa59c0dd2d6e61",
      "parents": [
        "fb15b9dd8b3f44290a7b3b06fdfd4be2ad73f0ac"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@sirena.org.uk",
        "time": "Thu Feb 02 00:00:01 2006 +0000"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Sat Mar 04 12:14:56 2006 -0500"
      },
      "message": "[PATCH] natsemi: NAPI and a bugfix\n\nThis patch converts the natsemi driver to use NAPI.  It was originally\nbased on one written by Harald Welte, though it has since been modified\nquite a bit, most extensively in order to remove the ability to disable\nNAPI since none of the other drivers seem to provide that functionality\nany more.\n\nSigned-off-by: Mark Brown \u003cbroonie@sirena.org.uk\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "f71e130966ba429dbd24be08ddbcdf263df9a5ad",
      "tree": "523f10c926012f520c47894811b94944a7793fd5",
      "parents": [
        "c499ec24c31edf270e777a868ffd0daddcfe7ebd"
      ],
      "author": {
        "name": "Arjan van de Ven",
        "email": "arjan@infradead.org",
        "time": "Fri Mar 03 21:33:57 2006 -0500"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Fri Mar 03 21:33:57 2006 -0500"
      },
      "message": "Massive net driver const-ification.\n"
    },
    {
      "commit": "689be43945e9ca7dd704522e55af1b8a73a994d3",
      "tree": "6dcc7a5675a9a2b98c36ee54f2ba4386f84efe83",
      "parents": [
        "f835e471b557c45d2e5701ea5215f6e739b4eb39"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Tue Jun 28 15:25:31 2005 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Tue Jun 28 15:25:31 2005 -0700"
      },
      "message": "[NET]: Remove gratuitous use of skb-\u003etail in network drivers.\n\nMany drivers use skb-\u003etail unnecessarily.\n\nIn these situations, the code roughly looks like:\n\n\tdev \u003d dev_alloc_skb(...);\n\n\t[optional] skb_reserve(skb, ...);\n\n\t... skb-\u003etail ...\n\nBut even if the skb_reserve() happens, skb-\u003edata equals\nskb-\u003etail.  So it doesn\u0027t make any sense to use anything\nother than skb-\u003edata in these cases.\n\nAnother case was the s2io.c driver directly mucking with\nthe skb-\u003edata and skb-\u003etail pointers.  It really just wanted\nto do an skb_reserve(), so that\u0027s what the code was changed\nto do instead.\n\nAnother reason I\u0027m making this change as it allows some SKB\ncleanups I have planned simpler to merge.  In those cleanups,\nskb-\u003ehead, skb-\u003etail, and skb-\u003eend pointers are removed, and\nreplaced with skb-\u003ehead_room and skb-\u003etail_room integers.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\nAcked-by: Jeff Garzik \u003cjgarzik@pobox.com\u003e\n"
    },
    {
      "commit": "760f86d78d92f39e2ceb55b40f0885eb755c8c2f",
      "tree": "dd779d819fbda486cfdcc6ecd28afa4c1c40373b",
      "parents": [
        "88d7bd8cb9eb8d64bf7997600b0d64f7834047c5"
      ],
      "author": {
        "name": "Herbert Xu",
        "email": "herbert@gondor.apana.org.au",
        "time": "Sat Apr 16 16:24:16 2005 +1000"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jgarzik@pobox.com",
        "time": "Sun May 15 18:18:56 2005 -0400"
      },
      "message": "[PATCH] Fw: [Bugme-new] [Bug 4482] New: natsemi: incorrect initialization of IPv6 Neighbor-discovery multicast\n\nOn Wed, Apr 13, 2005 at 05:36:42PM +0000, Andrew Morton wrote:\n\u003e            Summary: natsemi: incorrect initialization of IPv6 Neighbor-\n\u003e                     discovery multicast\n\nI\u0027ve got a pair of FA312 cards and this problem has bothered me\nfor ages.  This has finally prompted me to do something about it :)\n\nTurns out that somebody wasn\u0027t following the documentation.  We were\ndoing 16-bit writes to 32-bit registers which led to some addresses\nworking and others not so lucky.\n\nThis patch should fix the problem.\n\nSigned-off-by: Herbert Xu \u003cherbert@gondor.apana.org.au\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}