)]}' { "log": [ { "commit": "65a6ec0d72a07f16719e9b7a96e1c4bae044b591", "tree": "344e03a5039a44982c1b78d6113633b21b434820", "parents": [ "541010e4b8921cd781ff02ae68028501457045b6", "0181b61a988424b5cc44fe09e6968142359c815e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Oct 15 16:08:50 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Oct 15 16:08:50 2007 -0700" }, "message": "Merge branch \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)\n [ARM] 4578/1: CM-x270: PCMCIA support\n [ARM] 4577/1: ITE 8152 PCI bridge support\n [ARM] 4576/1: CM-X270 machine support\n [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()\n [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c\n [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c\n [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols\n [ARM] pxa: PXA3xx base support\n [NET] smc91x: fix PXA DMA support code\n [SERIAL] Fix console initialisation ordering\n [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile\n [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes\n [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils\n [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)\n [ARM] Rename consistent_sync() as dma_cache_maint()\n [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support\n [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support\n [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32\n [ARM] 4594/1: ns9xxx: use the new gpio functions\n [ARM] 4593/1: ns9xxx: implement generic clockevents\n ...\n" }, { "commit": "ac3f5753ea37d55c85aaf96211c13038fcc69aef", "tree": "439d464efa86d15bab659238bbc95694e280e5ae", "parents": [ "d49584c4a37c7228e7778bcb60f79e7a08472fa8" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "message": "i2c-nforce2: Declare PEC as supported\n\nThe i2c-nforce2 driver has SMBus PEC support, so it should say so.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d49584c4a37c7228e7778bcb60f79e7a08472fa8", "tree": "73d1d9e7c65d64d2f4cbe0f9fae4f97494df5006", "parents": [ "4153549734cbdba24e9cf5eb200b70b7b1572e15" ], "author": { "name": "Oleg Ryjkov", "email": "olegr@olegr.ca", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "message": "i2c-nforce2: Abort the transaction on error\n\nThis patch is to add an abort function that will bring back the MCP51/55\ncontroller if it was blocked by a block-read operation, in particular.\n(When a slave sends a wrong byte count on a byte read, the host gets\nlocked up). I\u0027ve only tested it on an MCP51 and MCP55. However, I\u0027m\nalmost certain it will also work on MCP65, I just did not have the board\nto test it on. Thus for now the abort function will only be called\nif an MCP51/55 was detected.\n\nSigned-off-by: Oleg Ryjkov \u003colegr@olegr.ca\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "4153549734cbdba24e9cf5eb200b70b7b1572e15", "tree": "0a68ced86dd6a50f14269f4fa1648f9731036dae", "parents": [ "a202707e71ff16d5e3a92f40eeaa41f3099dd8c5" ], "author": { "name": "Oleg Ryjkov", "email": "olegr@olegr.ca", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "message": "i2c-nforce2: Move status checking to a separate function\n\nThis is the first part of the patch that adds a function to reset the\nnvidia MCP51/55 i2c controller, if something bad happens to it (e.g.\na slave sends a wrong byte count during a block transaction).\n\nThis patch just adds nforce2_check_status function. It was originally\nwritten by Hans-Frieder Vogt.\n\nThe reason that I\u0027m the one sending it is:\n- I relied on it for the second part of the patch,\n- It makes the driver code cleaner/better.\n\nSigned-off-by: Oleg Ryjkov \u003colegr@olegr.ca\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "a202707e71ff16d5e3a92f40eeaa41f3099dd8c5", "tree": "7c43b75d4cc52fdf9f3a8a3b08a0b235e8529c24", "parents": [ "6662cbb989ee71712176570759bdc4e596aed417" ], "author": { "name": "Chris David", "email": "cd@chrisdavid.com", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "message": "i2c-au1550: Fix a misused register problem\n\nFix a \"mis-used register\" problem on the AMD MIPS Alchemy au1550\nI2C interface.\n\nIn summary, the programmable serial controller seems to hang the kernel\nwhen I send a single \u0027address\u0027 byte on the I2C bus. The patch\nessentially uses the PSC_SMBSTAT register\u0027s TE (transmit FIFO empty)\nbit to check when the transmit FIFO is empty, instead of using the\nPSC_SMBEVNT register\u0027s TU (transmit underflow) bit. Using the TE bit\nfixed the hang problem.\n\nSigned-off-by: Chris David \u003ccd@chrisdavid.com\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "6662cbb989ee71712176570759bdc4e596aed417", "tree": "f4c237ce251b4f34162ff1c6c7bd84514906b73e", "parents": [ "24d0fb423ca18adf509dec8a7326c0bdd6653e41" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:33 2007 +0200" }, "message": "i2c: Rename the PEC functionality bit\n\nRename I2C_FUNC_SMBUS_HWPEC_CALC as I2C_FUNC_SMBUS_PEC, and list that\nfunctionality as always available through the software implementation.\nUpdate documentation accordingly (and list similar requirements).\n\nThe way it\u0027s currently packaged doesn\u0027t present the capability in a\nuseful way.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "24d0fb423ca18adf509dec8a7326c0bdd6653e41", "tree": "fa6db5f0dca5f0a2844de560ca0086740f0a9627", "parents": [ "08fb68bb4bbc9c5970e4ed4920cb6144a70684cd" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Oct 13 23:56:32 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:32 2007 +0200" }, "message": "i2c-at91: Mark as broken\n\nMark the i2c-at91 driver BROKEN in Kconfig, and explain just\nwhy it\u0027s broken. (Summary: hardware design issues.)\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "53be79593452e568a856f8393985131848d59b72", "tree": "b1abe8a310486a6c0c146cdaf35f93e1f9faada3", "parents": [ "cdeec3cc79c7b1acfa89fb362b01e544ecfb285c" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Oct 13 23:56:32 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:32 2007 +0200" }, "message": "i2c: Remove i2c_algorithm.algo_control()\n\nThis removes:\n\n - An effectively unused hook: i2c_algorithm.algo_control.\n\n - The i2c_control() call, used only by i2c-dev to call that\n unused hook or set two barely supported adapter params.\n\n (That param setting moves into i2c-dev.c ... still iffy\n due to lack of locking, but no other changes.)\n\nAs shown by diffstat, this is a net code shrink. It also reduces the\ncomplexity of the I2C adapter and /dev interfaces.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "3be27d37c257fa5f99363f9c8e06e405cbad712e", "tree": "261b7945e9b7bf6819ad72f50bfe3d33a3a388bf", "parents": [ "e265cfa19c1220938de5f0291ed8d549a523de3c" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Oct 13 23:56:32 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:32 2007 +0200" }, "message": "i2c: Remove NOP i2c_algorithm.algo_control() methods\n\nThis removes NOP implementations of i2c_algorithm.algo_control.\n\nWith this change, there are no implementations of this hook in\nthe kernel.org tree ... that hook seems about ripe to remove.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e265cfa19c1220938de5f0291ed8d549a523de3c", "tree": "ad50706c7cbf75a9302b6e244b22d93babb415c1", "parents": [ "9d90c1fd9bdbffb456d1b1ef05215343503fd0b0" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "message": "i2c-dev: Reject I2C_M_RECV_LEN\n\nThe I2C_M_RECV_LEN calling convention for i2c_mesg.flags involves\nplaying games with reported buffer lengths. (They start out less\nthan their actual size, and the length is then modified to reflect\nhow many bytes were delivered ... which one hopes is less than the\npresumed actual size.) Refuse to play such error prone games across\nthe boundary between userspace and kernel.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "9d90c1fd9bdbffb456d1b1ef05215343503fd0b0", "tree": "7569f3402bdbb23c000ac59ad81522d3944f53f8", "parents": [ "567a244b8b431ee8399bb43c7e65df605bdd5458" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "message": "i2c-stub: Support multiple chips\n\nAdd support for multiple chips to i2c-stub. I\u0027ve changed the memory\nallocation scheme from static to dynamic, so that we don\u0027t waste too\nmuch memory.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "567a244b8b431ee8399bb43c7e65df605bdd5458", "tree": "b5df403c110f241981a83399b36ad5b740781e64", "parents": [ "e07bc679fbf59f1bf569d443e286911319480e87" ], "author": { "name": "Francis Moreau", "email": "francis.moro@gmail.com", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "message": "i2c-bfin-twi: Remove useless twi_lock mutex\n\nRemove this unneeded mutex. Indeed it was used to serialize access to\nthe hardware, but this is already done by the i2c-core layer, see\n\u0027bus_lock\u0027 mutex used by i2c_transfer().\n\nSigned-off-by: Francis Moreau \u003cfrancis.moro@gmail.com\u003e\nAcked-by: Bryan Wu \u003cbryan.wu@analog.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e07bc679fbf59f1bf569d443e286911319480e87", "tree": "6da353f8405971007aa48e0e4da15cfc2d1f3027", "parents": [ "a64ec07d3daeb7cdd363e66ed5929beacdd94652" ], "author": { "name": "Jason Gaston", "email": "jason.d.gaston@intel.com", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "message": "i2c-i801: Add support for the Intel Tolapai SMBus\n\nAdd the Intel Tolapai SMBus Controller DID.\n\nSigned-off-by: Jason Gaston \u003cjason.d.gaston@intel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "a64ec07d3daeb7cdd363e66ed5929beacdd94652", "tree": "2b787bd509ba42c3ffeeaf84cedd0ca49ae1d6cb", "parents": [ "553515e5c54dbf3340cd6773aaf0acb53291d6ad" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "message": "i2c: Document struct i2c_msg\n\nClarify use of the I2C_M_* flags by highlighting the fact that\nmost of them depend on I2C_FUNC_PROTOCOL_MANGLING.\n\nAlso provide kerneldoc for i2c_smbus_read_block_data() and also\nfor \"struct i2c_msg\".\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "553515e5c54dbf3340cd6773aaf0acb53291d6ad", "tree": "604b27ffd6452b925c4f2433e55fec60f755e44b", "parents": [ "95a7f10eadcd88cfd6640e44c7b8cf9ac1afafe7" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:31 2007 +0200" }, "message": "i2c/pcf8574: No arbitrary initialization\n\nDo not initialize the PCF8574 with an arbitrary value. Users will have\nto write the initial value to sysfs themselves.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Aurelien Jarno \u003caurelien@aurel32.net\u003e\n" }, { "commit": "95a7f10eadcd88cfd6640e44c7b8cf9ac1afafe7", "tree": "c37027c073302917249361e8f4ba20693a48f322", "parents": [ "7589a326d1d8c9da575ca4cbc6a3e6af02b57ead" ], "author": { "name": "Vladimir Barinov", "email": "vbarinov@ru.mvista.com", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "message": "i2c: Add DaVinci I2C controller support\n\nSigned-off-by: Vladimir Barinov \u003cvbarinov@ru.mvista.com\u003e\nAcked-by: Trilok Soni \u003csoni.trilok@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "7589a326d1d8c9da575ca4cbc6a3e6af02b57ead", "tree": "0e8c7309f26e22ca7ef437fcb43de46ac397482c", "parents": [ "8056c6cb2bb1632aa9221dce0e43a61db37b420f" ], "author": { "name": "Stefan Roese", "email": "sr@denx.de", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "message": "i2c-ibm_iic: Add support for new-style clients\n\nUse i2c_bit_add_numbered_adapter() if device id specified, so that the\ni2c-ibm_iic adapter works well with new-style pre-declared devices.\n\nSigned-off-by: Stefan Roese \u003csr@denx.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "8056c6cb2bb1632aa9221dce0e43a61db37b420f", "tree": "4ca321bba9db87c80c77f841c9a52c456be63aa5", "parents": [ "b5067f8ff37ed6cfa024170a9819bb09d55e9c1f" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "message": "i2c/tps65010: New-style driver updates, part 2\n\nSwitch the tps65010 driver into a \"new-style\" I2C driver, and convert all\nof its in-tree users (board support for OSK, H2, H3) accordingly.\n\nThat accounts for most of the board-specific code in this driver; the\nrest of that code is now moved into board-specific initcalls.\n\nAlso remove some of the many now-superfluous #includes.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "b5067f8ff37ed6cfa024170a9819bb09d55e9c1f", "tree": "c76f4958178cb069b95243942b3dc050997cc902", "parents": [ "83eaaed0d00c4c8e3081dc29286910899fed3182" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "message": "i2c/tps65010: New-style driver updates, part 1\n\nPrepare to convert tps65010 driver to \"new style\" driver by changing\nhow it references the i2c_client. This lets the eventual patch with\ndriver and platform updates be smaller.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "83eaaed0d00c4c8e3081dc29286910899fed3182", "tree": "6580c2f72350d2b14df40df5a42e738660202643", "parents": [ "3bbb835d4c53faf0bca62f0e39835926bef40b1f" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:30 2007 +0200" }, "message": "i2c-core: Make some code static\n\nAfter the i2c-isa removal some code can become static.\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "3bbb835d4c53faf0bca62f0e39835926bef40b1f", "tree": "116a84eeb50d0406e18f4d733a1ba05d67f8fe86", "parents": [ "cee37ae4071740cb190d1ac4ddb7aa77484aa7b3" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Oct 13 23:56:29 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sat Oct 13 23:56:29 2007 +0200" }, "message": "i2c: New-style devices can support driver model wakeup flags\n\nWe need to be able to flag I2C devices, such as RTCs, which can issue wake\nevents (usually through IRQ lines). This adds an i2c_board_info.flags bit,\nand uses it to initialize the i2c device node. (And shrinks a few lines\nthat were overly long.)\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "7eff2e7a8b65c25920207324e56611150eb1cd9a", "tree": "02a0eeba9d25d996233e30c18f258dfae0ae2139", "parents": [ "8380770c842faef3001e44662953d64ad9a93663" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Tue Aug 14 15:15:12 2007 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Oct 12 14:51:01 2007 -0700" }, "message": "Driver core: change add_uevent_var to use a struct\n\nThis changes the uevent buffer functions to use a struct instead of a\nlong list of parameters. It does no longer require the caller to do the\nproper buffer termination and size accounting, which is currently wrong\nin some places. It fixes a known bug where parts of the uevent\nenvironment are overwritten because of wrong index calculations.\n\nMany thanks to Mathieu Desnoyers for finding bugs and improving the\nerror handling.\n\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nCc: Mathieu Desnoyers \u003cmathieu.desnoyers@polymtl.ca\u003e\nCc: Cornelia Huck \u003ccornelia.huck@de.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "c3cef3f3c07bb98e023e4d5441e60538516a4741", "tree": "a9b681736bef0d150635c494ff2dfe479742ad34", "parents": [ "72e3524c0b591c30c3a2e2058dd78327ec99efed" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Mon Aug 20 10:19:10 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri Oct 12 21:14:58 2007 +0100" }, "message": "[ARM] pxa: update pxa i2c driver to use clk support\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "939bc4943d0483961edc45b63a7d27b4ffe547e3", "tree": "4fb51849830e0bc3ef4e6534117fdb216a29406d", "parents": [ "51e5709ad46127da9476f31336113b5401f94dba" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sun Sep 09 22:29:14 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sun Sep 09 22:29:14 2007 +0200" }, "message": "i2c-algo-bit: Read block data bugfix\n\nThis fixes a bug in the way i2c-algo-bit handles I2C_M_RECV_LEN,\nused to implement i2c_smbus_read_block_data(). Previously, in the\nabsence of PEC (rarely used!) it would NAK the \"length\" byte:\n\n\tS addr Rd [A] [length] NA\n\nThat prevents the subsequent data bytes from being read:\n\n\tS addr Rd [A] [length] { A [data] }* NA\n\nThe primary fix just reorders two code blocks, so the length used\nin the \"should I NAK now?\" check incorporates the data which it\njust read from the slave device.\n\nHowever, that move also highlighted other fault handling glitches.\nThis fixes those by abstracting the RX path ack/nak logic, so it\ncan be used in more than one location. Also, a few CodingStyle\nissues were also resolved.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "51e5709ad46127da9476f31336113b5401f94dba", "tree": "b5ac346545ef80576843143108060125f9c6bbd2", "parents": [ "9a3180e70e35ff69586ada5421b5e7bad52f60e4" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Sep 09 22:29:13 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sun Sep 09 22:29:13 2007 +0200" }, "message": "i2c-pxa: Fix adapter number\n\nIt turns out that platform_device.id is a \"u32\" so testing it for being\nnonnegative is useless when setting up an i2c adapte. Instead,\ndo what the platform_bus code does and test it against the value \"-1\".\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "9a3180e70e35ff69586ada5421b5e7bad52f60e4", "tree": "68f47d75fb3788c077d8da8ef75caf90a1c37815", "parents": [ "b21010ed6498391c0f359f2a89c907533fe07fec" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sun Sep 09 22:29:13 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sun Sep 09 22:29:13 2007 +0200" }, "message": "i2c-gpio: Fix adapter number\n\nIt turns out that platform_device.id is a \"u32\" so testing it for being\nnonnegative is useless when setting up an i2c bitbang device. Instead,\ndo what the platform_bus code does and test it against the value \"-1\". \n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nAcked-by: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "60693e5a9a2063b87d4dbe8029816c814b3fa84e", "tree": "d69e4bb85ca9e571285fb54907f19cef5edef195", "parents": [ "4500371e050af18e606c25ee5cc8b030868d3089" ], "author": { "name": "Shane Huang", "email": "shane.huang@amd.com", "time": "Thu Aug 30 23:56:38 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Aug 31 01:42:23 2007 -0700" }, "message": "i2c-piix4: Fix SB700 PCI device ID\n\nWe find that SB700 and SB800 use the same SMBus device ID as SB600, which is\n0x4385, instead of the already submitted 0x4395.\n\nBesides removing the wrong SB700 device ID, add SB800 support to kernel, by\nrenaming the PCI_DEVICE_ID_ATI_IXP600_SMBUS into\nPCI_DEVICE_ID_ATI_SBX00_SMBUS.\n\nSigned-off-by: Shane Huang \u003cshane.huang@amd.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b5d0b4ba389711183b5af71438fe21b40ee32d6d", "tree": "dd389ba405847db453c035df9b464cef1cd13025", "parents": [ "c1147cc6d18389f6530bae27741b9b2665e862e6" ], "author": { "name": "Ben Dooks", "email": "ben@fluff.org", "time": "Tue Aug 14 18:37:15 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Aug 14 18:37:15 2007 +0200" }, "message": "i2c-s3c2410: Build fix\n\nFixup the include files after the arch moves that\nwhere included in 2.6.23.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "c1147cc6d18389f6530bae27741b9b2665e862e6", "tree": "a818261097cf68c1a2fb21ade8b4daf07c18de9d", "parents": [ "a07ad1cc0300931bfd76bfcd2da3ddad743f4a89" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "message": "i2c/menelaus: Build fix\n\nFix Menelaus build error, and remove needless \"#define DEBUG\".\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "a07ad1cc0300931bfd76bfcd2da3ddad743f4a89", "tree": "d8b7eb634571649f9401d351801e5de87cc5c91d", "parents": [ "5af0e07f87e7d9be2a9db514af1e338341240f6d" ], "author": { "name": "Dale Farnsworth", "email": "dale@farnsworth.org", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "message": "i2c-mv64xxx: Reinitialize hw and driver on I2C bus hang\n\nUnder certain conditions, the mv64xxx I2C bus can hang preventing\nfurther operation. To make the driver more robust, we now reset\nthe I2C hardware and the driver state machine when such hangs are\ndetected.\n\nSigned-off-by: Dale Farnsworth \u003cdale@farnsworth.org\u003e\nAcked-by: Mark A. Greer \u003cmgreer@mvista.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "5af0e07f87e7d9be2a9db514af1e338341240f6d", "tree": "832666718356a281e52653ab9cd6abc30e082fbe", "parents": [ "432ca994bf7107e88916fd9606ca7402a4571359" ], "author": { "name": "Domen Puncer", "email": "domen.puncer@telargo.com", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "message": "i2c-mpc: Don\u0027t disable I2C module on stop condition\n\nDisabling module on stop doesn\u0027t work on some CPUs (ie. mpc8241,\nas reported by Guennadi Liakhovetski), so remove that.\n\nDisable I2C module on errors/interrupts to prevent it from\nlocking up on mpc5200b.\n\nSigned-off-by: Domen Puncer \u003cdomen.puncer@telargo.com\u003e\nAcked-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "432ca994bf7107e88916fd9606ca7402a4571359", "tree": "3b5f455abece510c33f5cf03636f91e46836f6cb", "parents": [ "25da383d26a1dcca4f0205769a24e5eac79c6d35" ], "author": { "name": "Arnaud Patard", "email": "arnaud.patard@rtp-net.org", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "message": "i2c-iop3xx: Set I2C_CLASS_HWMON to adapter class\n\nIn order to be able to use sensors on the IOP3xx SoCs, one needs to set\nthe adapter class to I2C_CLASS_HWMON.\n\nSigned-off-by: Arnaud Patard \u003carnaud.patard@rtp-net.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "25da383d26a1dcca4f0205769a24e5eac79c6d35", "tree": "0515ab5858fa2ccb587785a431e4fce87fe44da1", "parents": [ "322454a65371477bed0eb1d189c50d781ebd7f85" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "message": "i2c/isp1301_omap: Build fixes, whitespace\n\nBuild fixes for isp1301_omap driver. I think an earlier version\nof this must have gotten lost somewhere, or maybe it only went\ninto the Linux-OMAP tree.\n\nAlso, some whitespace fixes to bring this more into sync with the\nversion of this found in the Linux-OMAP tree. (That version has\nupdates for the OTG controller on the OMAP 1710 which break that\nfunctionality on OMAP 161x boards like the H2, so merging all of\nit is not currently an option.)\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "322454a65371477bed0eb1d189c50d781ebd7f85", "tree": "d8ea0374b5f3f51033439d6aedd39aecccaf2141", "parents": [ "002cf63191eb8b68b7fed48f014b87c456188acc" ], "author": { "name": "Scott Wood", "email": "scottwood@freescale.com", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Aug 14 18:37:14 2007 +0200" }, "message": "i2c-mpc: Pass correct dev_id to free_irq on error path\n\nSigned-off-by: Scott Wood \u003cscottwood@freescale.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "002cf63191eb8b68b7fed48f014b87c456188acc", "tree": "f3ece0588f8593db41271a80348e03b700653cc9", "parents": [ "39d3520c92cf7a28c07229ca00cc35a1e8026c77" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Aug 14 18:37:13 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Aug 14 18:37:13 2007 +0200" }, "message": "i2c-i801: Typo: erroneous\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "b0cb1a19d05b8ea8611a9ef48a17fe417f1832e6", "tree": "895fe53e8dc4fc59d05b963ac079f6ff759ad0fb", "parents": [ "6c8dca5d53f95009d4fff00195bf38f277dc4366" ], "author": { "name": "Rafael J. Wysocki", "email": "rjw@sisk.pl", "time": "Sun Jul 29 23:24:36 2007 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Jul 29 16:45:38 2007 -0700" }, "message": "Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION\n\nReplace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid\nconfusion (among other things, with CONFIG_SUSPEND introduced in the\nnext patch).\n\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7b5573769f26a23518b33a64ec129d2833564877", "tree": "697674b1d2bf12541fc745baa8ef8d9e6faf8888", "parents": [ "8e8ef2971b0fd6dcf1a66014fb74b41938eecb4e", "27b92bdbd589cf3f59244bf5e848e7be254a2e4c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sat Jul 28 19:33:04 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sat Jul 28 19:33:04 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6\n\n* \u0027for-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:\n Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected\n Blackfin arch: add BF54x I2C/TWI TWI0 driver support\n Blackfin On-Chip RTC driver update for supporting BF54x\n Blackfin Ethernet MAC driver: fix bug Report returned -ENOMEM upwards (in case L1/uncached memory alloc fails)\n Blackfin arch: add error message when IRQ no available\n Blackfin arch: Initialize the exception vectors early in the boot process\n Blackfin arch: fix a compiling warning about dma-mapping\n Blackfin arch: switch to using proper defines this time THREAD_SIZE and PAGE_SIZE instead of just PAGE_SIZE everywhere\n Blackfin arch: fix bug which unaligns the init thread\u0027s stack and causes the current macro to fail.\n Blackfin arch: Load P0 before storing through it\n Blackfin arch: fix KGDB bug, dont forget last parameter.\n Blackfin arch: add selections for BF544 and BF542\n Blackfin arch: use bfin_read_SWRST() now that BF561 provides it\n Blackfin arch: setup aliases for some core Core A MMRs\n" }, { "commit": "f52e0ef47b22c18ff56f6233f814b329cb6e32cc", "tree": "4fb8a9411c91711aff950af2d86b71d0d77312d4", "parents": [ "0ca56b4bb24e01158cb5d87adafa4b76da1f044d" ], "author": { "name": "Andrew Morton", "email": "akpm@linux-foundation.org", "time": "Thu Jul 26 10:41:09 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 26 11:35:17 2007 -0700" }, "message": "i2c: ds1682 warning fix\n\nia64:\n\ndrivers/i2c/chips/ds1682.c: In function `ds1682_show\u0027:\ndrivers/i2c/chips/ds1682.c:78: warning: long long unsigned int format, long unsigned int arg (arg 3)\ndrivers/i2c/chips/ds1682.c:78: warning: long long unsigned int format, long unsigned int arg (arg 3)\n\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "d8e715428fe70f5005829d3bad3a0a3fb8a747b2", "tree": "f9cf0a647720f29b0dfa77ca33a8245815669e34", "parents": [ "2c95cd71f8df36de4a063cec879d49fb8b462e8e" ], "author": { "name": "Bryan Wu", "email": "bryan.wu@analog.com", "time": "Wed Jul 25 16:58:03 2007 +0800" }, "committer": { "name": "Bryan Wu", "email": "bryan.wu@analog.com", "time": "Wed Jul 25 16:58:03 2007 +0800" }, "message": "Blackfin arch: add BF54x I2C/TWI TWI0 driver support\n\nSigned-off-by: Bryan Wu \u003cbryan.wu@analog.com\u003e\n\n" }, { "commit": "40b42f1ebf653cd72c32eb1a1a0b9fea2dfbfd7d", "tree": "6a2adfcd8412189932a372ce25def8611e287b5c", "parents": [ "5a021e9ffd56c22700133ebc37d607f95be8f7bd", "e24b8cb4fa2bb779bdf48656152366b6f52f748f" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 19 14:24:57 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 19 14:24:57 2007 -0700" }, "message": "Merge branch \u0027release\u0027 of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6\n\n* \u0027release\u0027 of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits)\n i2c: Delete the i2c-isa pseudo bus driver\n hwmon: refuse to load abituguru driver on non-Abit boards\n hwmon: fix Abit Uguru3 driver detection on some motherboards\n hwmon/w83627ehf: Be quiet when no chip is found\n hwmon/w83627ehf: No need to initialize fan_min\n hwmon/w83627ehf: Export the thermal sensor types\n hwmon/w83627ehf: Enable VBAT monitoring\n hwmon/w83627ehf: Add support for the VID inputs\n hwmon/w83627ehf: Fix timing issues\n hwmon/w83627ehf: Add error messages for two error cases\n hwmon/w83627ehf: Convert to a platform driver\n hwmon/w83627ehf: Update the Kconfig entry\n make coretemp_device_remove() static\n hwmon: Add LM93 support\n hwmon: Improve the pwmN_enable documentation\n hwmon/smsc47b397: Don\u0027t report missing fans as spinning at 82 RPM\n hwmon: Add support for newer uGuru\u0027s\n hwmon/f71805f: Add temperature-tracking fan control mode\n hwmon/w83627ehf: Preserve speed reading when changing fan min\n hwmon: fix detection of abituguru volt inputs\n ...\n\nManual fixup of trivial conflict in MAINTAINERS file\n" }, { "commit": "e24b8cb4fa2bb779bdf48656152366b6f52f748f", "tree": "13cb838a2dd364b0453061f038cf62b118585d03", "parents": [ "c182f5bbfb399b1fa2ad65107b3caf9c1c69435e" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Jul 08 14:26:37 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Jul 19 14:25:20 2007 -0400" }, "message": "i2c: Delete the i2c-isa pseudo bus driver\n\nThere are no users of i2c-isa left, so we can finally get rid of it.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "0c4a59fed41bdd4c30ce0999a87f30a812f29ee2", "tree": "8e88b4fdf538afb7bc9d740765a1a49ac148ba32", "parents": [ "969529021a5c3df74ea8f10d329b2427e559a90f" ], "author": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Tue Jul 17 04:06:09 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 10:23:15 2007 -0700" }, "message": "OMAP: add TI TWL92330/Menelaus Power Management chip driver\n\nAdd Texas Instruments TWL92330/Menelaus Power Management chip driver. This\nincludes voltage regulators, Dual slot memory card tranceivers and\nreal-time clock(RTC).\n\nThe support for RTC is integrated with this driver only; it is not separate\nmodule. Passes \u0027rtctest\u0027 on OMAP H4 EVM, other than lack of \"periodic\"\n(1/N second) IRQs. System wakeup alarms (from suspend-to-RAM) work too.\n\nThe battery keeps the RTC active over power off, so once you set clock\n(rdate/ntpdate/etc, then \"hwclock -w\") then RTC_HCTOSYS at boot time will\nbehave as expected.\n\nCc: \"Jean Delvare\" \u003ckhali@linux-fr.org\u003e\nCc: \"Tony Lindgren\" \u003ctony@atomide.com\u003e\nCc: \"David Brownell\" \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Trilok Soni \u003csoni.trilok@gmail.com\u003e\nAcked-by: Alessandro Zummo \u003calessandro.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "5ee403f584a67fb8725cca4d55218925b9295528", "tree": "e90776f2428b224cfa69b60f09ef683b424fedf3", "parents": [ "ae6f4a8b986c9d9eff00fcbd23d1c2585b97fe57" ], "author": { "name": "Yoann Padioleau", "email": "padator@wanadoo.fr", "time": "Tue Jul 17 04:03:01 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 10:22:59 2007 -0700" }, "message": "parse error, drivers/i2c/busses/i2c-pmcmsp.c\n\nSigned-off-by: Yoann Padioleau \u003cpadator@wanadoo.fr\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2a9915c8a2e532f6c9b435e5f90008d601a87b90", "tree": "e39bfe46c624007d4d1c6c8c63c26d25457b644b", "parents": [ "ba5b55d0498bd56b9d60d85c5f654cd7b291e9c8" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Sun Jul 15 21:37:16 2007 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Jul 15 16:40:52 2007 -0700" }, "message": "make i2c-acorn tristate\n\nIt depends on tristate I2C and it\u0027s trivial to make modular. The\ncurrent Kconfig allows I2C\u003dm, I2C_ACORN\u003dy, which doesn\u0027t work at\nall; alternatives are dependency on I2C\u003dy and making I2C_ACORN\nitself a tristate. The latter is the right thing to do...\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\nAcked-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "05bd711ea2862cb1c754903326b7858bc700b2e9", "tree": "aec7cdf2fee4576ff2563090ba8907bc10a68713", "parents": [ "ececfdee1cc287123149c801af201e41c7c3cc84" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Sun Jul 15 21:01:22 2007 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Jul 15 16:40:52 2007 -0700" }, "message": "missing argument in bin_attribute -\u003eread()/-\u003ewrite()\n\nFallout from commit 91a6902958f052358899f58683d44e36228d85c2 (\u0027sysfs:\nadd parameter \"struct bin_attribute *\" ...\u0027)\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "21ba0f88ae56da82a3a15fe54d729208b64c4f4b", "tree": "17ce67f276fe3ea7284c3dc730bdd6a2ec7dfe2f", "parents": [ "dc690d8ef842b464f1c429a376ca16cb8dbee6ae", "36e235901f90fb83215be43cbd8f1ca14661ea40" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 12 13:40:57 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 12 13:40:57 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)\n PCI: Only build PCI syscalls on architectures that want them\n PCI: limit pci_get_bus_and_slot to domain 0\n PCI: hotplug: acpiphp: avoid acpiphp \"cannot get bridge info\" PCI hotplug failure\n PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge\n PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3\n PCI: hotplug: pciehp: wait for 1 second after power off slot\n PCI: pci_set_power_state(): check for PM capabilities earlier\n PCI: cpci_hotplug: Convert to use the kthread API\n PCI: add pci_try_set_mwi\n PCI: pcie: remove SPIN_LOCK_UNLOCKED\n PCI: ROUND_UP macro cleanup in drivers/pci\n PCI: remove pci_dac_dma_... APIs\n PCI: pci-x-pci-express-read-control-interfaces cleanups\n PCI: Fix typo in include/linux/pci.h\n PCI: pci_ids, remove double or more empty lines\n PCI: pci_ids, add atheros and 3com_2 vendors\n PCI: pci_ids, reorder some entries\n PCI: i386: traps, change VENDOR to DEVICE\n PCI: ATM: lanai, change VENDOR to DEVICE\n PCI: Change all drivers to use pci_device-\u003erevision\n ...\n" }, { "commit": "dc690d8ef842b464f1c429a376ca16cb8dbee6ae", "tree": "77955849af5a15755f5e55e24ae4b9c520583a72", "parents": [ "57399ec9077a4b962b81037aaa279fab52f5e989", "91a6902958f052358899f58683d44e36228d85c2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 12 13:40:20 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 12 13:40:20 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits)\n sysfs: add parameter \"struct bin_attribute *\" in .read/.write methods for sysfs binary attributes\n sysfs: make directory dentries and inodes reclaimable\n sysfs: implement sysfs_get_dentry()\n sysfs: move sysfs_drop_dentry() to dir.c and make it static\n sysfs: restructure add/remove paths and fix inode update\n sysfs: use sysfs_mutex to protect the sysfs_dirent tree\n sysfs: consolidate sysfs spinlocks\n sysfs: make kobj point to sysfs_dirent instead of dentry\n sysfs: implement sysfs_find_dirent() and sysfs_get_dirent()\n sysfs: implement SYSFS_FLAG_REMOVED flag\n sysfs: rename sysfs_dirent-\u003es_type to s_flags and make room for flags\n sysfs: make sysfs_drop_dentry() access inodes using ilookup()\n sysfs: Fix oops in sysfs_drop_dentry on x86_64\n sysfs: use singly-linked list for sysfs_dirent tree\n sysfs: slim down sysfs_dirent-\u003es_active\n sysfs: move s_active functions to fs/sysfs/dir.c\n sysfs: fix root sysfs_dirent -\u003e root dentry association\n sysfs: use iget_locked() instead of new_inode()\n sysfs: reorganize sysfs_new_indoe() and sysfs_create()\n sysfs: fix parent refcounting during rename and move\n ...\n" }, { "commit": "0a85e9a271a754e352af8a8b625025017fd97449", "tree": "6c1598f800e678fe455649b3db5ede29fc06a7db", "parents": [ "254db9b5e7b1b0d38a4f177c2c23a5685c78221a" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jul 12 14:12:32 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:32 2007 +0200" }, "message": "i2c-rpx: Remove\n\nThis driver has been broken forever. It depends on i2c-algo-8xx which\nhas never been in the mainline kernel.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "254db9b5e7b1b0d38a4f177c2c23a5685c78221a", "tree": "10dffafbbf287d61194fbe885a7e977de2d88242", "parents": [ "1b144df1d7d69d6dd3394205933c8951dd8b6784" ], "author": { "name": "Domen Puncer", "email": "domen.puncer@telargo.com", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "message": "i2c-mpc: work around missing-9th-clock-pulse bug\n\nWork around a problem reported on:\nhttp://ozlabs.org/pipermail/linuxppc-embedded/2005-July/019038.html\nWithout this patch I2C on mpc5200 becomes unusable after a while.\nTested on mpc5200 boards by Matthias Fechner and me.\n\nSigned-off-by: Domen Puncer \u003cdomen.puncer@telargo.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "1b144df1d7d69d6dd3394205933c8951dd8b6784", "tree": "f61286ee111a107d74516a3e1ad924a018ab8528", "parents": [ "c6e16295b71ec006c8cb6d13520e9194652a6026" ], "author": { "name": "Marc St-Jean", "email": "stjeanma@pmc-sierra.com", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "message": "i2c: New PMC MSP71xx TWI bus driver\n\nAdd TWI driver for the PMC-Sierra MSP71xx devices.\n\n[JD: Drop the probe hack, don\u0027t set algo_data as we never use it, return\nthe right error code if the driver registration fails.]\n\nSigned-off-by: Marc St-Jean \u003cMarc_St-Jean@pmc-sierra.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "c6e16295b71ec006c8cb6d13520e9194652a6026", "tree": "2d901a6284e53f5523f42f58a37f6736a4c359b1", "parents": [ "e296fb7f301f3c3398adc6d991b097cfa73e1c0c" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "message": "i2c-savage4: Delete many unused defines\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e296fb7f301f3c3398adc6d991b097cfa73e1c0c", "tree": "8eb4fe324010c0bcd11e590334c69c224ad034ad", "parents": [ "b9cdad74883a797952de52464d118d685cafc05a" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "message": "i2c/tsl2550: Speed up initialization\n\nThere\u0027s some redundancy in the tsl2550 initialization sequence. It is\npowering up the device twice, and setting the operating mode twice\ntoo. Setting things just once saves SMBus transactions, which aren\u0027t\nalways cheap, speeding up the device initialization.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Rodolfo Giometti \u003cgiometti@linux.it\u003e\n" }, { "commit": "b9cdad74883a797952de52464d118d685cafc05a", "tree": "b843038e60482c01854ec14b57502bb3833143d0", "parents": [ "7edcb9abb594a8f3b4ca756e03d01c870aeae127" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "message": "i2c: New bus driver for the TAOS evaluation modules\n\nThis is a new I2C bus driver for the TAOS evaluation modules. Developped\nand tested on the TAOS TSL2550 EVM.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "7edcb9abb594a8f3b4ca756e03d01c870aeae127", "tree": "1a58c21abdb71a2ec146225e0d226103926dbbd7", "parents": [ "ca8b9e32a11a7cbfecbef00c8451a79fe1af392e" ], "author": { "name": "Oleg Ryjkov", "email": "olegr@google.com", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "message": "i2c-i801: Use the internal 32-byte buffer on ICH4+\n\nAdd an ability to utilize the internal SRAM buffer on ICH4\nand newer host controllers to speed up execution of block operations.\n\nI\u0027ve split the code so that it is more clear which block transaction is\nperformed.\n\nFirst of all the host controller\u0027s type is identified. isich4 is set when\nwe think that the controller has the internal buffer. Then, before every\nblock transaction, if isich4 is set, we attempt to enable the E32B bit in\nSMBAUXCTL register.\n\nSigned-off-by: Oleg Ryjkov \u003colegr@google.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "ca8b9e32a11a7cbfecbef00c8451a79fe1af392e", "tree": "ae5404a18928769a9d956a810c34239a4201749f", "parents": [ "a92c344d8c640a812c7a9f5a5202d862cd052a0f" ], "author": { "name": "Oleg Ryjkov", "email": "olegr@google.com", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:31 2007 +0200" }, "message": "i2c-i801: Various cleanups\n\n* Use defines instead of raw numbers for register bits\n* Fix several wrong indentations and trailing whitespace\n* Move hwpec timeout checking to a separate function\n\nSigned-off-by: Oleg Ryjkov \u003colegr@google.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "a92c344d8c640a812c7a9f5a5202d862cd052a0f", "tree": "f9c78b17f0a57137b7e90d8dae72a81dd98c2189", "parents": [ "066af983c74162fa98e7c5ffa8a5ead4a6979b1f" ], "author": { "name": "Rodolfo Giometti", "email": "giometti@enneenne.com", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "message": "i2c: Add support for the TSL2550\n\nAdd support for Taos TSL2550 ambient light sensors.\n(http://www.taosinc.com/product_detail.asp?cateid\u003d4\u0026proid\u003d18).\n\nSigned-off-by: Rodolfo Giometti \u003cgiometti@linux.it\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "066af983c74162fa98e7c5ffa8a5ead4a6979b1f", "tree": "175db335af8519db99b0c303f9906760161ee35f", "parents": [ "4d6ceed4426cd85e1203a3153246334a3537f92b" ], "author": { "name": "Rodolfo Giometti", "email": "giometti@enneenne.com", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "message": "i2c-pxa: Support new-style I2C drivers\n\nSigned-off-by: Rodolfo Giometti \u003cgiometti@linux.it\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "4d6ceed4426cd85e1203a3153246334a3537f92b", "tree": "5141b914231c6bd7b6fe8b679f0134f420da0cec", "parents": [ "7e69c3ac93a9a7aa29dab7179f86da67db7b0ca3" ], "author": { "name": "Atsushi Nemoto", "email": "anemo@mba.ocn.ne.jp", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "message": "i2c-gpio: Make some internal functions static\n\ni2c_gpio_getsda() and i2c_gpio_getscl() are only used in this file.\n\nSigned-off-by: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nAcked-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "7e69c3ac93a9a7aa29dab7179f86da67db7b0ca3", "tree": "6c8fdbc48ed4a0a3ee30278e0557562b7b1c8fea", "parents": [ "757ba4c697244da878b65585d8cb671da1cb9eaf" ], "author": { "name": "Atsushi Nemoto", "email": "anemo@mba.ocn.ne.jp", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "message": "i2c-gpio: Add support for new-style clients\n\nUse i2c_bit_add_numbered_bus() so that the i2c-gpio adapter works well\nwith new-style pre-declared devices.\n\nSigned-off-by: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "757ba4c697244da878b65585d8cb671da1cb9eaf", "tree": "d7f570ed2811e9a1ec72913a4cef44ffdc51ed3a", "parents": [ "7375cd822d600b4e8b83cbc025422e4267bf5fac" ], "author": { "name": "Martin Michlmayr", "email": "tbm@cyrius.com", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "message": "i2c-iop3xx: Switch to static adapter numbering\n\nUpdate the IOP3xx I2C driver to use i2c_add_numbered_adapter(), so that\nlater patches can convert boards to using new-style drivers.\n\nSigned-off-by: Martin Michlmayr \u003ctbm@cyrius.com\u003e\nTested-by: Voipio Riku \u003cRiku.Voipio@movial.fi\u003e\nCc: Dan J Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "7375cd822d600b4e8b83cbc025422e4267bf5fac", "tree": "a6b8b00e9a41924de9c37e4477f1045ea20e89b3", "parents": [ "7d13714650ec8868f999d2dc3d06e2723687d0c3" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:30 2007 +0200" }, "message": "i2c-sis5595: Resolve resource conflict with sis5595\n\nLet the i2c-sis5595 driver release its PCI device after registering.\nThis is to allow the sis5595 hardware monitoring driver to also\naccess this PCI device. The same trick is already used in the\ni2c-viapro and via686a drivers to let them both load.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "b53c82211a7239643aa7c9b4887429c30f353406", "tree": "92f8db7d8bab40adc2b5d8649b095f4221571825", "parents": [ "1469fa263870acd890a4b9f6ef557acc5d673b44" ], "author": { "name": "Oleg Ryjkov", "email": "olegr@google.com", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "message": "i2c-nforce2: Add support for SMBus block transactions\n\nAdd support for SMBus block read/write transactions to i2c-nforce2\ndriver, in particular to host controllers MCP51 and MCP55.\n\nSigned-off-by: Oleg Ryjkov \u003colegr@google.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "1469fa263870acd890a4b9f6ef557acc5d673b44", "tree": "4be6e9ac5a5d30db7b4a446ae101cd6010b38470", "parents": [ "65b22ad9508b609b0625eccb2680996a1e09ed16" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "message": "i2c-mpc: Use i2c_add_numbered_adapter\n\nMove the i2c-mpc driver over to using the new i2c infrastructure.\nSpecifically, it now uses i2c_add_numbered_adapter so that the bus number\ncan be determined ahead of time and used to register i2c clients before\nthe bus is instantiated.\n\nTested on an MPC5200 based board\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "65b22ad9508b609b0625eccb2680996a1e09ed16", "tree": "821171e9b076953d486464ae9dedf76987bc5dd9", "parents": [ "c29c22218b99dad95f7cd0281415a854aeee805c" ], "author": { "name": "Dale Farnsworth", "email": "dale@farnsworth.org", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "message": "i2c-mv64xxx: Use i2c_add_numbered_adapter\n\nConvert the Marvell mv64xxx I2C driver to use the new i2c infrastructure,\nby calling i2c_add_numbered_adapter(). This allows clients to be\nregistered before the bus is instantiated.\n\nSigned-off-by: Dale Farnsworth \u003cdale@farnsworth.org\u003e\nAcked-by: Mark A. Greer \u003cmgreer@mvista.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "c29c22218b99dad95f7cd0281415a854aeee805c", "tree": "ff2af319e645bc69bc8bb9c58e9a466b1a3c4bee", "parents": [ "5162b75b24963eebe62c4d4161d0fe0b337a313b" ], "author": { "name": "Henry Su", "email": "henry.su@amd.com", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "message": "i2c-piix4: Add support for the ATI SB700\n\nAdd the SMBus device ID for ATI SB700.\n\nSigned-off-by: Henry Su \u003cHenry.su@amd.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "5162b75b24963eebe62c4d4161d0fe0b337a313b", "tree": "789f176279aa5890f7805ebd3b2ae9d7a8b8aa4c", "parents": [ "4b2643d7d9bdcd776749e17f73c168ddf02e93cb" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "message": "i2c: New DS1682 chip driver\n\nA driver for the Dallas DS1682 elapsed time recorder chip.\n\nTested on a MPC5200 based board using the integrated i2c adapter.\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "4b2643d7d9bdcd776749e17f73c168ddf02e93cb", "tree": "1642900ea1c196cc27d120f0af4de44fff30633e", "parents": [ "ba7fbb723f50ab2607989a282af655fb0fab0492" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "message": "i2c: Fix the i2c_smbus_read_i2c_block_data() prototype\n\nLet the drivers specify how many bytes they want to read with\ni2c_smbus_read_i2c_block_data(). So far, the block count was\nhard-coded to I2C_SMBUS_BLOCK_MAX (32), which did not make much sense.\nMany driver authors complained about this before, and I believe it\u0027s\nabout time to fix it. Right now, authors have to do technically stupid\nthings, such as individual byte reads or full-fledged I2C messaging,\nto work around the problem. We do not want to encourage that.\n\nI even found that some bus drivers (e.g. i2c-amd8111) already\nimplemented I2C block read the \"right\" way, that is, they didn\u0027t\nfollow the old, broken standard. The fact that it was never noticed\nbefore just shows how little i2c_smbus_read_i2c_block_data() was used,\nwhich isn\u0027t that surprising given how broken its prototype was so far.\n\nThere are some obvious compatiblity considerations:\n* This changes the i2c_smbus_read_i2c_block_data() prototype. Users\n outside the kernel tree will notice at compilation time, and will\n have to update their code.\n* User-space has access to i2c_smbus_xfer() directly using i2c-dev, so\n the changed expectations would affect tools such as i2cdump. In order\n to preserve binary compatibility, we give I2C_SMBUS_I2C_BLOCK_DATA\n a new numeric value, and define I2C_SMBUS_I2C_BLOCK_BROKEN with the\n old numeric value. When i2c-dev receives a transaction with the\n old value, it can convert it to the new format on the fly.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "ba7fbb723f50ab2607989a282af655fb0fab0492", "tree": "2dbb3c8c895369ddd03c06eff9b67c737ded2957", "parents": [ "890e037509f5b3f967b16ea0ea525c7c75b213ae" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:29 2007 +0200" }, "message": "i2c: Deprecate legacy RTC drivers\n\nWe have a new RTC subsystem with better drivers.\n\nLegacy driver status:\n* ds1337: The DS1337 and DS1339 are now supported by the rtc-ds1307\n driver, so it looks to me like we could even delete the ds1337\n driver right away.\n* ds1374: Will soon be replaced with Scott Wood\u0027s rtc-ds1374 driver.\n* m41t00: The M41T00 is supported by the rtc-ds1307 driver. For the\n M41T81 and M41T85, the rtc-m41t80 driver written by Atsushi Nemoto\n should work.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nAcked-by: Mark A. Greer \u003cmgreer@mvista.com\u003e\nAcked-by: James Chapman \u003cjchapman@katalix.com\u003e\nCc: Randy Vinson \u003crvinson@mvista.com\u003e\n" }, { "commit": "9d9c01ceff00fcba50043f500cac471ecf6752c9", "tree": "c9760a35ff6afe6e859a268d765d52d44db91449", "parents": [ "d75d53cd571c02990d56e72f615ab11e943772f9" ], "author": { "name": "Matthias Kaehlcke", "email": "matthias.kaehlcke@gmail.com", "time": "Thu Jul 12 14:12:28 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:28 2007 +0200" }, "message": "scx200_acb: Use mutex instead of semaphore\n\nThe scx200_acb driver use a semaphore as mutex. Use the mutex API\ninstead of the (binary) semaphore.\n\nSigned-off-by: Matthias Kaehlcke \u003cmatthias.kaehlcke@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCc: Jordan Crouse \u003cjordan.crouse@amd.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d64f73be1b59b9556de0a8fbd4f1a003c6a45a5c", "tree": "9a8fca55b1fab9ac3d0781294553feaeeba37473", "parents": [ "4eb6bf6bfb580afaf1e1a1d30cba17a078530cf4" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Thu Jul 12 14:12:28 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Thu Jul 12 14:12:28 2007 +0200" }, "message": "i2c: Add kernel documentation\n\nGenerate I2C kerneldoc; fix various glitches and add \"context\" sections to\nthat documentation. Most I2C and SMBus functions still have no kerneldoc.\n\nLet me suggest providing kerneldoc for all the i2c_smbus_*() functions as\na small and mostly self-contained project for anyone so inclined. :)\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "91a6902958f052358899f58683d44e36228d85c2", "tree": "a713792cf3bb09bdbd2ac6906aa44b3da3e49250", "parents": [ "51225039f3cf9d250596d1344494b293274b9169" ], "author": { "name": "Zhang Rui", "email": "rui.zhang@intel.com", "time": "Sat Jun 09 13:57:22 2007 +0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jul 11 16:09:09 2007 -0700" }, "message": "sysfs: add parameter \"struct bin_attribute *\" in .read/.write methods for sysfs binary attributes\n\nWell, first of all, I don\u0027t want to change so many files either.\n\nWhat I do:\nAdding a new parameter \"struct bin_attribute *\" in the\n.read/.write methods for the sysfs binary attributes.\n\nIn fact, only the four lines change in fs/sysfs/bin.c and\ninclude/linux/sysfs.h do the real work.\nBut I have to update all the files that use binary attributes\nto make them compatible with the new .read and .write methods.\nI\u0027m not sure if I missed any. :(\n\nWhy I do this:\nFor a sysfs attribute, we can get a pointer pointing to the\nstruct attribute in the .show/.store method,\nwhile we can\u0027t do this for the binary attributes.\nI don\u0027t know why this is different, but this does make it not\nso handy to use the binary attributes as the regular ones.\nSo I think this patch is reasonable. :)\n\nWho benefits from it:\nThe patch that exposes ACPI tables in sysfs\nrequires such an improvement.\nAll the table binary attributes share the same .read method.\nParameter \"struct bin_attribute *\" is used to get\nthe table signature and instance number which are used to\ndistinguish different ACPI table binary attributes.\n\nWithout this parameter, we need to offer different .read methods\nfor different ACPI table binary attributes.\nThis is impossible as there are various ACPI tables on different\nplatforms, and we don\u0027t know what they are until they are loaded.\n\nSigned-off-by: Zhang Rui \u003crui.zhang@intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "7b595756ec1f49e0049a9e01a1298d53a7faaa15", "tree": "cd06687ab3e5c7a5a4ef91903dff207a18c4db76", "parents": [ "dbde0fcf9f8f6d477af3c32d9979e789ee680cde" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Thu Jun 14 03:45:17 2007 +0900" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jul 11 16:09:06 2007 -0700" }, "message": "sysfs: kill unnecessary attribute-\u003eowner\n\nsysfs is now completely out of driver/module lifetime game. After\ndeletion, a sysfs node doesn\u0027t access anything outside sysfs proper,\nso there\u0027s no reason to hold onto the attribute owners. Note that\noften the wrong modules were accounted for as owners leading to\naccessing removed modules.\n\nThis patch kills now unnecessary attribute-\u003eowner. Note that with\nthis change, userland holding a sysfs node does not prevent the\nbacking module from being unloaded.\n\nFor more info regarding lifetime rule cleanup, please read the\nfollowing message.\n\n http://article.gmane.org/gmane.linux.kernel/510293\n\n(tweaked by Greg to not delete the field just yet, to make it easier to\nmerge things properly.)\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nCc: Cornelia Huck \u003ccornelia.huck@de.ibm.com\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "44c10138fd4bbc4b6d6bff0873c24902f2a9da65", "tree": "6e16d3ec80c87490dc743f72da086356f2906ace", "parents": [ "b8a3a5214d7cc115f1ca3a3967b7229d97c46f4a" ], "author": { "name": "Auke Kok", "email": "auke-jan.h.kok@intel.com", "time": "Fri Jun 08 15:46:36 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jul 11 16:02:10 2007 -0700" }, "message": "PCI: Change all drivers to use pci_device-\u003erevision\n\nInstead of all drivers reading pci config space to get the revision\nID, they can now use the pci_device-\u003erevision member.\n\nThis exposes some issues where drivers where reading a word or a dword\nfor the revision number, and adding useless error-handling around the\nread. Some drivers even just read it for no purpose of all.\n\nIn devices where the revision ID is being copied over and used in what\nappears to be the equivalent of hotpath, I have left the copy code\nand the cached copy as not to influence the driver\u0027s performance.\n\nCompile tested with make all{yes,mod}config on x86_64 and i386.\n\nSigned-off-by: Auke Kok \u003cauke-jan.h.kok@intel.com\u003e\nAcked-by: Dave Jones \u003cdavej@redhat.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "6776f3d26aec60cb6e0fc770a00993accd09376f", "tree": "1552f41b68f41887ed628f0571adcfd4e6a4e29c", "parents": [ "ece97941c378b4a424530585a7c855e466f1bd2c" ], "author": { "name": "Enrico Scholz", "email": "enrico.scholz@sigma-chemnitz.de", "time": "Mon May 21 12:29:40 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat May 26 10:09:39 2007 +0100" }, "message": "[ARM] 4403/1: Make the PXA-I2C driver work with lockdep validator\n\nUsing lockdep validator causes warnings like\n\n INFO: trying to register non-static key.\n the code is fine but needs lockdep annotation.\n turning off the locking correctness validator.\n [\u003cc00241a0\u003e] (dump_stack+0x0/0x14) from [\u003cc00520f8\u003e] (__lock_acquire+0x150/0xc40)\n [\u003cc0051fa8\u003e] (__lock_acquire+0x0/0xc40) from [\u003cc00530a0\u003e] (lock_acquire+0x5c/0x70)\n [\u003cc0053044\u003e] (lock_acquire+0x0/0x70) from [\u003cc01d9e44\u003e] (_spin_lock_irq+0x48/0x58)\n r7:c07e5144 r6:00000000 r5:c015fb94 r4:c07e50b8\n [\u003cc01d9dfc\u003e] (_spin_lock_irq+0x0/0x58) from [\u003cc015fb94\u003e] (i2c_pxa_xfer+0x110/0x2e0)\n r5:c07e50b8 r4:0000001f\n\nThis is caused by memcpy\u0027ing a statical initialized spin-lock. This patch\nremoves a static pxa_i2c structure which was used only as a source for this\nmemcpy() operation. Instead of, members and the spinlock will be\ninitialized manually.\n\nSigned-off-by: Enrico Scholz \u003cenrico.scholz@sigma-chemnitz.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "a1ba15832c8f6ac2d5d193a6dbb91bcf7705b732", "tree": "b49ae9259aab5e1527aeae578f133495d144c3e4", "parents": [ "6a7ce82f02e8ce7391e40018749d93762abf6ee0" ], "author": { "name": "Arnaud Patard", "email": "arnaud.patard@rtp-net.org", "time": "Tue May 22 19:49:16 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 22 19:49:16 2007 +0200" }, "message": "i2c-s3c2410: Fix build warning\n\nFix for the following build warning:\n CC drivers/i2c/busses/i2c-s3c2410.o\n drivers/i2c/busses/i2c-s3c2410.c: In function \u0027s3c24xx_i2c_probe\u0027:\n drivers/i2c/busses/i2c-s3c2410.c:839: warning: format \u0027%ld\u0027 expects type \u0027long int\u0027, but argument 4 has type \u0027resource_size_t\u0027\n\nSigned-off-by: Arnaud Patard \u003carnaud.patard@rtp-net.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "6a7ce82f02e8ce7391e40018749d93762abf6ee0", "tree": "c9f4844585172a7f50f8686a6476e3911ef55201", "parents": [ "de81d2aaebc8e5e5167cb93f674c57705898e45e" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue May 22 19:49:16 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 22 19:49:16 2007 +0200" }, "message": "i2c-tiny-usb: Fix truncated adapter name\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Till Harbaum \u003clists@harbaum.org\u003e\n" }, { "commit": "de81d2aaebc8e5e5167cb93f674c57705898e45e", "tree": "d452f6b0f41879617a75e1fe9092f196de108bf1", "parents": [ "d25790532370e7448e3d3bd25a17e1e9f1299816" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Tue May 22 19:49:16 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 22 19:49:16 2007 +0200" }, "message": "i2c: Legacy i2c drivers shouldn\u0027t issue uevents\n\nPrevent legacy drivers from issuing uevents for device creation/removal,\nso that userspace can\u0027t cause modprobing loops for them. This became a\nproblem for some legacy PC drivers. I can\u0027t easily see it becoming an\nissue with I2C legacy drivers, but consistency-in-paranoia seems likely\nto be a good thing here. For usable i2c-level driver model uevents, just\nswitch to a new-style driver.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "fc0b60f1dc311a2f7443ce46305edd287b2d8947", "tree": "ffe830c647bd7659c613c2429453e7da787910df", "parents": [ "e9910846fdb19f7c5810cbe4c95e4ca6dab6a00f", "906fc9e92f0e8b618d4025c3aa6289415ecd8152" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu May 10 11:50:51 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu May 10 11:50:51 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git390.osdl.marist.edu/pub/scm/linux-2.6\n\n* \u0027for-linus\u0027 of git://git390.osdl.marist.edu/pub/scm/linux-2.6:\n [S390] update default configuration.\n [S390] Kconfig: no wireless on s390.\n [S390] Kconfig: use common Kconfig files for s390.\n [S390] Kconfig: common config options for s390.\n [S390] Kconfig: unwanted menus for s390.\n [S390] Kconfig: menus with depends on HAS_IOMEM.\n [S390] Kconfig: refine depends statements.\n [S390] Avoid compile warning.\n [S390] qdio: re-add lost perf_stats.tl_runs change in qdio_handle_pci\n [S390] Avoid sparse warnings.\n [S390] dasd: Fix modular build.\n [S390] monreader inlining cleanup.\n [S390] cio: Make some structures and a function static.\n [S390] cio: Get rid of _ccw_device_get_device_number().\n [S390] fix subsystem removal fallout\n" }, { "commit": "c91e23c63f77a7643d857a082248cf2cdb71b67c", "tree": "88cef3ade3d2870dfa91f7b9f229f7acb6da6985", "parents": [ "6e99806ebb33c1b4906ce4f99eec65d4962f12b9" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@gmail.com", "time": "Thu May 10 03:15:58 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu May 10 09:26:53 2007 -0700" }, "message": "i2c-at91: compile fix (IS_ERR)\n\n CC drivers/i2c/busses/i2c-at91.o\ndrivers/i2c/busses/i2c-at91.c: In function \u0027at91_i2c_probe\u0027:\ndrivers/i2c/busses/i2c-at91.c:213: warning: implicit declaration of function \u0027IS_ERR\u0027\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6e99806ebb33c1b4906ce4f99eec65d4962f12b9", "tree": "f635e145eb92dd2c4ca7bf157664ff770a3f952e", "parents": [ "dd00a99e7a4b739bd41ef4093760efc7e447f963" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Thu May 10 03:15:52 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu May 10 09:26:53 2007 -0700" }, "message": "i2c-at91 supports new-style i2c drivers\n\nMake i2c-at91 register as i2c adapter zero (none of these chips seem to\nhave more than one TWI controllers) to let it kick in any board-specific\ndevice declarations; also make it hotplug/coldplug.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Andrew Victor \u003candrew@sanpeople.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0cfe61e1a72b345073bb7900a7887da8541abc7a", "tree": "934fd1e24f7f20c16b171136cf5e4cf34e436d03", "parents": [ "c4a7f5eb5f6a02dcc3a35e47c37c3d221ebc1cc2" ], "author": { "name": "Russell King", "email": "rmk@arm.linux.org.uk", "time": "Thu May 10 03:15:32 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu May 10 09:26:52 2007 -0700" }, "message": "arm: fix i2c-pxa build\n\nFrom commit 7d054817b780e664bed6701b2aa637718e1905b7:\n\u003e According to the PXA27x developer\u0027s manual, we shall do so.\n\nWe shall also at least compile test our changes.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e25df1205f37c7bff3ab14fdfc8a5249f3c69c82", "tree": "e53c1f17d79a62bb845438d6af6a7693ef5440f3", "parents": [ "eeca7a36a86db8bfc1945dd7f6f0c22a6b66b31d" ], "author": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Thu May 10 15:45:57 2007 +0200" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Thu May 10 15:46:07 2007 +0200" }, "message": "[S390] Kconfig: menus with depends on HAS_IOMEM.\n\nAdd \"depends on HAS_IOMEM\" to a number of menus to make them\ndisappear for s390 which does not have I/O memory.\n\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "a3d25c275d383975504dc53c25b691df59bd3c48", "tree": "161a2ae12a20a630c2f639e144872db2b92eb098", "parents": [ "d60846c4d16f9518b098b905af2b87cb6bf6dc42" ], "author": { "name": "Rafael J. Wysocki", "email": "rjw@sisk.pl", "time": "Wed May 09 02:33:18 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed May 09 12:30:48 2007 -0700" }, "message": "PM: Separate hibernation code from suspend code\n\n[ With Johannes Berg \u003cjohannes@sipsolutions.net\u003e ]\n\nSeparate the hibernation (aka suspend to disk code) from the other suspend\ncode. In particular:\n\n * Remove the definitions related to hibernation from include/linux/pm.h\n * Introduce struct hibernation_ops and a new hibernate() function to hibernate\n the system, defined in include/linux/suspend.h\n * Separate suspend code in kernel/power/main.c from hibernation-related code\n in kernel/power/disk.c and kernel/power/user.c (with the help of\n hibernation_ops)\n * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops\n\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nCc: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: Nigel Cunningham \u003cnigel@nigel.suspend2.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e63340ae6b6205fef26b40a75673d1c9c0c8bb90", "tree": "8d3212705515edec73c3936bb9e23c71d34a7b41", "parents": [ "04c9167f91e309c9c4ea982992aa08e83b2eb42e" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Tue May 08 00:28:08 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 08 11:15:07 2007 -0700" }, "message": "header cleaning: don\u0027t include smp_lock.h when not used\n\nRemove includes of \u003clinux/smp_lock.h\u003e where it is not used/needed.\nSuggested by Al Viro.\n\nBuilds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,\nsparc64, and arm (all 59 defconfigs).\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "da6752964290567a6b4ea180d1becda75e810e87", "tree": "fbd577a64563fe264d38c957132d468058470f3b", "parents": [ "a7d801afc3d4d1c8aaa0449f17b9f9ce62e16236" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Tue May 08 00:27:42 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 08 11:15:05 2007 -0700" }, "message": "layered parport code uses parport-\u003edev\n\nUpdate some of the layered parport_driver code to use parport-\u003edev:\n\n\t- i2c-parport (parent of i2c_adapter)\n\t- spi_butterfly (parent of spi_master, allowing cruft removal)\n\t- lp (creating class_device)\n\t- ppdev (parent of parportN device)\n\t- tipar (creating class_device)\n\nThere are still drivers that should be updated, like some of the input\ndrivers; but they won\u0027t be any worse off than they are today.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ab3bfca7abf3fd0fe41d26d839610a787aa7e587", "tree": "e62e58beaf9d22d4156b27d4523c3728bf5769bc", "parents": [ "b1296cc48b39355241470ef934a5e2270e3f23bd" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun May 06 14:50:49 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon May 07 12:12:59 2007 -0700" }, "message": "remove software_suspend()\n\nRemove software_suspend() and all its users since\npm_suspend(PM_SUSPEND_DISK) should be equivalent and there\u0027s no point in\nhaving two interfaces for the same thing.\n\nThe patch also changes the valid_state function to return 0 (false) for\nPM_SUSPEND_DISK when SOFTWARE_SUSPEND is not configured instead of\naccepting it and having the whole thing fail later.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: \"Rafael J. Wysocki\" \u003crjw@sisk.pl\u003e\nCc: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c6799ade4ae04b53a5f677e5289116155ff01574", "tree": "3601b5e2387e39d62c207e4268c6cc5c68f2a364", "parents": [ "b7405e16435f710edfae6ba32bef4ca20d3de145", "5cd47155155a32e5b944ac9fc3f3dc578e429aa0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun May 06 13:20:10 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun May 06 13:20:10 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027for-linus\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)\n [ARM] Add comments marking in-use ptrace numbers\n [ARM] Move syscall saving out of the way of utrace\n [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro\n [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header\n [ARM] mm 10: allow memory type to be specified with ioremap\n [ARM] mm 9: add additional device memory types\n [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6\n [ARM] iop: add missing parens in macro\n [ARM] mm 7: remove duplicated __ioremap() prototypes\n ARM: OMAP: fix OMAP1 mpuio suspend/resume oops\n ARM: OMAP: MPUIO wake updates\n ARM: OMAP: speed up gpio irq handling\n ARM: OMAP: plat-omap changes for 2430 SDP\n ARM: OMAP: gpio object shrinkage, cleanup\n ARM: OMAP: /sys/kernel/debug/omap_gpio\n ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon\n ARM: OMAP: Enable 24xx GPIO autoidling\n [ARM] 4318/2: DSM-G600 Board Support\n [ARM] 4227/1: minor head.S fixups\n [ARM] 4328/1: Move i.MX UART regs to driver\n ...\n" }, { "commit": "89661adaaee2f85116b399e642129ccd4dafd195", "tree": "86a0bea62ef1ebbd454d5daa4deef1534ab5a222", "parents": [ "6adae5d9e69743aede91b274224751811f7174f1", "9890b12a4a65a7b3181dd963421740edf0e14d69" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 04 18:04:29 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 04 18:04:29 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (59 commits)\n PCI: Free resource files in error path of pci_create_sysfs_dev_files()\n pci-quirks: disable MSI on RS400-200 and RS480\n PCI hotplug: Use menuconfig objects\n PCI: ZT5550 CPCI Hotplug driver fix\n PCI: rpaphp: Remove semaphores\n PCI: rpaphp: Ensure more pcibios_add/pcibios_remove symmetry\n PCI: rpaphp: Use pcibios_remove_pci_devices() symmetrically\n PCI: rpaphp: Document is_php_dn()\n PCI: rpaphp: Document find_php_slot()\n PCI: rpaphp: Rename rpaphp_register_pci_slot() to rpaphp_enable_slot()\n PCI: rpaphp: refactor tail call to rpaphp_register_slot()\n PCI: rpaphp: remove rpaphp_set_attention_status()\n PCI: rpaphp: remove print_slot_pci_funcs()\n PCI: rpaphp: Remove setup_pci_slot()\n PCI: rpaphp: remove a call that does nothing but a pointer lookup\n PCI: rpaphp: Remove another wrappered function\n PCI: rpaphp: Remve another call that is a wrapper\n PCI: rpaphp: remove a function that does nothing but wrap debug printks\n PCI: rpaphp: Remove un-needed goto\n PCI: rpaphp: Fix a memleak; slot-\u003elocation string was never freed\n ...\n" }, { "commit": "6473d160b4aba8023bcf38519a5989694dfd51a7", "tree": "5a3fe32ecc3d846b9de00ad5ba726314ca79f15b", "parents": [ "a9dfd281a7e12f6d9b53b5a28649b3a3c76a70e6" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Mar 06 02:45:12 2007 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed May 02 19:02:35 2007 -0700" }, "message": "PCI: Cleanup the includes of \u003clinux/pci.h\u003e\n\nI noticed that many source files include \u003clinux/pci.h\u003e while they do\nnot appear to need it. Here is an attempt to clean it all up.\n\nIn order to find all possibly affected files, I searched for all\nfiles including \u003clinux/pci.h\u003e but without any other occurence of \"pci\"\nor \"PCI\". I removed the include statement from all of these, then I\ncompiled an allmodconfig kernel on both i386 and x86_64 and fixed the\nfalse positives manually.\n\nMy tests covered 66% of the affected files, so there could be false\npositives remaining. Untested files are:\n\narch/alpha/kernel/err_common.c\narch/alpha/kernel/err_ev6.c\narch/alpha/kernel/err_ev7.c\narch/ia64/sn/kernel/huberror.c\narch/ia64/sn/kernel/xpnet.c\narch/m68knommu/kernel/dma.c\narch/mips/lib/iomap.c\narch/powerpc/platforms/pseries/ras.c\narch/ppc/8260_io/enet.c\narch/ppc/8260_io/fcc_enet.c\narch/ppc/8xx_io/enet.c\narch/ppc/syslib/ppc4xx_sgdma.c\narch/sh64/mach-cayman/iomap.c\narch/xtensa/kernel/xtensa_ksyms.c\narch/xtensa/platform-iss/setup.c\ndrivers/i2c/busses/i2c-at91.c\ndrivers/i2c/busses/i2c-mpc.c\ndrivers/media/video/saa711x.c\ndrivers/misc/hdpuftrs/hdpu_cpustate.c\ndrivers/misc/hdpuftrs/hdpu_nexus.c\ndrivers/net/au1000_eth.c\ndrivers/net/fec_8xx/fec_main.c\ndrivers/net/fec_8xx/fec_mii.c\ndrivers/net/fs_enet/fs_enet-main.c\ndrivers/net/fs_enet/mac-fcc.c\ndrivers/net/fs_enet/mac-fec.c\ndrivers/net/fs_enet/mac-scc.c\ndrivers/net/fs_enet/mii-bitbang.c\ndrivers/net/fs_enet/mii-fec.c\ndrivers/net/ibm_emac/ibm_emac_core.c\ndrivers/net/lasi_82596.c\ndrivers/parisc/hppb.c\ndrivers/sbus/sbus.c\ndrivers/video/g364fb.c\ndrivers/video/platinumfb.c\ndrivers/video/stifb.c\ndrivers/video/valkyriefb.c\ninclude/asm-arm/arch-ixp4xx/dma.h\nsound/oss/au1550_ac97.c\n\nI would welcome test reports for these files. I am fine with removing\nthe untested files from the patch if the general opinion is that these\nchanges aren\u0027t safe. The tested part would still be nice to have.\n\nNote that this patch depends on another header fixup patch I submitted\nto LKML yesterday:\n [PATCH] scatterlist.h needs types.h\n http://lkml.org/lkml/2007/3/01/141\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Badari Pulavarty \u003cpbadari@us.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "5b68790cd5e2879067bcbc45b01eeb6081e7d731", "tree": "89b5a557a665a124df3a0941d65de111231bba0b", "parents": [ "e00a8cdf325346c531c841ee85c803792db60157" ], "author": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Tue May 01 23:26:35 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:35 2007 +0200" }, "message": "i2c-s3c2410: Fix bug in releasing driver\n\nWhen compiled as a module, the i2c-s3c2410 driver does not\nfree either the IRQ or the i2c adapter it attached to the system.\n\nAs part of this fix, move to the usual kernel style\nof freeing items as part of the probe error path\nmaking the remove process easier.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e00a8cdf325346c531c841ee85c803792db60157", "tree": "cd77aa2a2f94e8577f73ec3e2e4073ad94c184b9", "parents": [ "e8c76eed2ecdb8e9ca5339761d2c076d32b7cbca" ], "author": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Tue May 01 23:26:35 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:35 2007 +0200" }, "message": "i2c-s3c2410: Fix I2C SDA to SCL setup time\n\nFix the setup time for SDA to SCL due to the way\nthe S3C24XX I2C controller works.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e8c76eed2ecdb8e9ca5339761d2c076d32b7cbca", "tree": "1c03cab194b6a25d6a2fa159ff7798e9d17c4844", "parents": [ "eefcd75e72f382270f8f64e030550b10e3882b2b" ], "author": { "name": "Till Harbaum", "email": "lists@harbaum.org", "time": "Tue May 01 23:26:35 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:35 2007 +0200" }, "message": "i2c: New i2c-tiny-usb bus driver\n\nAdd a driver for the i2c-tiny-usb interface. This is a simple\ndo-it-yourself USB to I2C interface targeted at experimental and\nhome use. See the i2c-tiny-usb homepage for hardware details:\nhttp://www.harbaum.org/till/i2c_tiny_usb\n\nSigned-off-by: Till Harbaum \u003ctill@harbaum.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "35532d20035d04b0ec28508583a56c7a65c5fa47", "tree": "fa96aba5029c34431be334c5fc0269dcf80d95c1", "parents": [ "11de70bd4d40a1a39c1133b260bfbd6306e981d3" ], "author": { "name": "Milind Arun Choudhary", "email": "milindchoudhary@gmail.com", "time": "Tue May 01 23:26:34 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:34 2007 +0200" }, "message": "i2c: SPIN_LOCK_UNLOCKED cleanup\n\nSPIN_LOCK_UNLOCKED cleanup, use __SPIN_LOCK_UNLOCKED instead.\n\nSigned-off-by: Milind Arun Choudhary \u003cmilindchoudhary@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "11de70bd4d40a1a39c1133b260bfbd6306e981d3", "tree": "5945c553760cfc7c133138e8517d4646830145e6", "parents": [ "bcda9f1eb0de0e1108c8b2765e5b7afa0dfb6c9f" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue May 01 23:26:34 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:34 2007 +0200" }, "message": "i2c: Obsolete i2c-ixp2000, i2c-ixp4xx and scx200_i2c\n\nThe new generic i2c-gpio driver should be used instead.\nThe obsolete drivers will be removed in September 2007.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Deepak Saxena \u003cdsaxena@plexity.net\u003e\nCc: Jordan Crouse \u003cjordan.crouse@amd.com\u003e\n" }, { "commit": "bcda9f1eb0de0e1108c8b2765e5b7afa0dfb6c9f", "tree": "407e0b2302a93d7ac4eccfefee73f2622268ecd6", "parents": [ "1c23af90dc44d05bbb6a3b5246ab664b1f943943" ], "author": { "name": "Ben Dooks", "email": "ben@fluff.org", "time": "Tue May 01 23:26:34 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:34 2007 +0200" }, "message": "i2c: New Simtec I2C bus driver\n\nPlatform driver for the Simtec CPLD based simple I2C logic.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "1c23af90dc44d05bbb6a3b5246ab664b1f943943", "tree": "184dc150ca69a9dfbc00996e35659ef41beb202c", "parents": [ "16538e6b32600f76ad212d42fc2b1f801e32ab4b" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Tue May 01 23:26:34 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:34 2007 +0200" }, "message": "i2c: Bitbanging I2C bus driver using the GPIO API\n\nThis is a very simple bitbanging I2C bus driver utilizing the new\narch-neutral GPIO API. Useful for chips that don\u0027t have a built-in\nI2C controller, additional I2C busses, or testing purposes.\n\nTo use, include something similar to the following in the\nboard-specific setup code:\n\n #include \u003clinux/i2c-gpio.h\u003e\n\n static struct i2c_gpio_platform_data i2c_gpio_data \u003d {\n\t.sda_pin\t\u003d GPIO_PIN_FOO,\n\t.scl_pin\t\u003d GPIO_PIN_BAR,\n };\n static struct platform_device i2c_gpio_device \u003d {\n\t.name\t\t\u003d \"i2c-gpio\",\n\t.id\t\t\u003d 0,\n\t.dev\t\t\u003d {\n\t\t.platform_data\t\u003d \u0026i2c_gpio_data,\n\t},\n };\n\nRegister this platform_device, set up the I2C pins as GPIO if\nrequired and you\u0027re ready to go. This will use default values for\nudelay and timeout, and will work with GPIO hardware that does not\nsupport open drain mode, but allows sensing of the SDA and SCL lines\neven when they are being driven.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "16538e6b32600f76ad212d42fc2b1f801e32ab4b", "tree": "e63d5eda9af87ce6e587f79a4b10a0982d36480c", "parents": [ "b86a1bc8e39641d0c4676943b77a3486ee296db8" ], "author": { "name": "Jan Engelhardt", "email": "jengelh@linux01.gwdg.de", "time": "Tue May 01 23:26:34 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:34 2007 +0200" }, "message": "Use menuconfig objects - I2C\n\nAllow the whole I2C menu to be disabled at once without diving into\nthe submenus for deselecting all options (should the user desire so).\n\nSigned-off-by: Jan Engelhardt \u003cjengelh@gmx.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "b86a1bc8e39641d0c4676943b77a3486ee296db8", "tree": "19041f82e3322c4779845152ff00732fff60e7ff", "parents": [ "7d054817b780e664bed6701b2aa637718e1905b7" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue May 01 23:26:34 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:34 2007 +0200" }, "message": "i2c: Restore i2c_smbus_read_block_data\n\nAdd back the i2c_smbus_read_block_data helper function, it is needed\nby the upcoming lm93 hardware monitoring driver and possibly others.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "7d054817b780e664bed6701b2aa637718e1905b7", "tree": "b6487bf6475c023485f33958410f7714d63f8c3a", "parents": [ "494dbb64dc5b369cc28542f4c4d634e57b0d7f18" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue May 01 23:26:33 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:33 2007 +0200" }, "message": "i2c-pxa: Clean transaction stop\n\nIt was reported to me that the i2c-pxa driver was not able to process\nmore that 50 transactions per second. Investigation revealed that the\nI2C unit was busy for 20 ms after every transaction. The reason seems\nto be that we forget to clear the STOP and ACKNACK bits at the end of\nthe transaction. According to the PXA27x developer\u0027s manual, we shall\ndo so.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Lennert Buytenhek \u003ckernel@wantstofly.org\u003e\nCc: Nicolas Pitre \u003cnico@cam.org\u003e\n" }, { "commit": "494dbb64dc5b369cc28542f4c4d634e57b0d7f18", "tree": "342efe3a6648ea902ac56a3053aef9226c2dc2d5", "parents": [ "424ed67c7dae37e8115e1bebc3261e86a624dff2" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue May 01 23:26:33 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:33 2007 +0200" }, "message": "i2c-algo-bit: Improve debugging\n\nImprove the debugging features of the i2c-algo-bit driver:\n* Make it possible to compile the driver without debugging support\n at all, making it much smaller.\n* Use dev_dbg() for debugging messages where possible, and dev_err()\n for error messages.\n* Remove redundant debugging messages.\n\nThese changes allowed for minor code cleanups, which are included\nas well.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" } ], "next": "424ed67c7dae37e8115e1bebc3261e86a624dff2" }