)]}' { "log": [ { "commit": "c223701cf6c706f42840631c1ca919a18e6e2800", "tree": "0ae93a4a36e874d5e1378e5e2d032a81e71350f7", "parents": [ "9ff6f72f432364991d68e99cae72cb141c166e70" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "message": "ide: add \"hdx\u003dnodma\" kernel parameter\n\n* Add \"hdx\u003dnodma\" option allowing user to disallow DMA for a given device.\n\n* Obsolete \"ide\u003dnodma\" option.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9ff6f72f432364991d68e99cae72cb141c166e70", "tree": "e37e5dc6d1b2387f7cbc2909d5cb534d4a395a79", "parents": [ "1b5169405e50b98b2bd1e4f86c7706ea24a59193" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "message": "ide: remove hwif-\u003eautodma and drive-\u003eautodma\n\n* hpt34x.c: disable DMA masks for HPT345\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* Check noautodma global variable instead of drive-\u003eautodma in ide_tune_dma().\n\n This fixes handling of \"ide\u003dnodma\" kernel parameter for icside, ide-cris,\n au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers.\n\n* Remove hwif-\u003eautodma (it was not checked by IDE core code anyway) and\n drive-\u003eautodma (was set by all host drivers - except HPT345/TRM290 special\n cases - unless \"ide\u003dnodma\" was used).\n\nWhile at it:\n- remove needless printk() from icside.c\n- remove stale FIXME/comment from ide-probe.c\n- don\u0027t force DMA off if PCI bus-mastering had to be enabled in setup-pci.c\n (this setting was always later over-ridden by host drivers anyway)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1b5169405e50b98b2bd1e4f86c7706ea24a59193", "tree": "a9bf4bfe1dd7881d2d73d69ef32d5f450a98754a", "parents": [ "c58e79dd44243ec919d789193ffb35a220c54695" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:57 2007 +0200" }, "message": "ide: remove \"idex\u003ddma\" kernel parameter\n\nIt has been obsoleted since 1 Nov 2004, is valid only when used together with\n\"ide\u003dnodma\" kernel parameter (which makes no sense) and only for aec62xx,\ncmd64x, cs5220, generic, hpt366, sl82c105, tc86c001 and triflex host drivers.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3135469e1f679b1728fa047ed43b0c63cdf50c84", "tree": "901ed711e5a14e453c1522a23e099662a5d41794", "parents": [ "259c0632d30d75a5a7fccdac558cc128f03ce903" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "message": "ide: unexport noautodma\n\nnoautodma can now be unexported.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0ae2e178652753ae1797d407755a3505f7c1d2a7", "tree": "fa725edcfb4b9752ebf2aa49a3e42e158537d4ed", "parents": [ "b8b739d3361c16773a30fe5c0360336bbc19f435" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "message": "ide: remove -\u003eide_dma_check (take 2)\n\n* Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend\n on BIOS for programming device/controller for DMA. Set it in cy82c693,\n generic, ns87415, opti621 and trm290 host drivers.\n\n* Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520\n host driver.\n\n* Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag.\n\n* Add generic ide_dma_check() helper and remove all open coded -\u003eide_dma_check\n implementations. Fix all places checking for presence of -\u003eide_dma_check\n hook to check for -\u003eide_dma_on instead.\n\n* Remove no longer needed code from config_drive_for_dma().\n\n* Make ide_tune_dma() static.\n\nv2:\n* Fix config_drive_for_dma() return values.\n\n* Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI\u003dn by adding\n dummy config_drive_for_dma() inline.\n\n* Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check().\n\n* Fix init_hwif_it8213() comment.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "88b2b32babd46cd54d2de4d17eb869aea3383e11", "tree": "d446864f7c3431f8c428eecacd11caf7b794f018", "parents": [ "6e249395eace037ef139a1c8996b31e3797e412a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "message": "ide: move ide_config_drive_speed() calls to upper layers (take 2)\n\n* Convert {ide_hwif_t,ide_pci_device_t}-\u003ehost_flag to be u16.\n\n* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program \n the host for the transfer mode after programming the device. Set it\n in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac\n and via82cxxx host drivers.\n\n* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely\n skip programming of host/device for the transfer mode (\"smart\" hosts).\n Set it in it821x host driver and check it in ide_tune_dma().\n\n* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all\n direct -\u003eset_pio_mode/-\u003espeedproc users to use these helpers.\n\n* Move ide_config_drive_speed() calls from -\u003eset_pio_mode/-\u003espeedproc\n methods to callers.\n\n* Rename -\u003espeedproc method to -\u003eset_dma_mode, make it void and update\n all implementations accordingly.\n\n* Update ide_set_xfer_rate() comments.\n\n* Unexport ide_config_drive_speed().\n\nv2:\n* Fix issues noticed by Sergei:\n - export ide_set_dma_mode() instead of moving -\u003eset_pio_mode abuse wrt\n to setting DMA modes from sc1200_set_pio_mode() to do_special()\n - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()\n - check for (hwif-\u003eset_pio_mode) \u003d\u003d NULL in ide_set_pio_mode()\n - check for (hwif-\u003eset_dma_mode) \u003d\u003d NULL in ide_set_dma_mode()\n - return -1 from ide_set_{pio,dma}_mode() if -\u003eset_{pio,dma}_mode \u003d\u003d NULL\n - don\u0027t set -\u003eset_{pio,dma}_mode on it821x in \"smart\" mode\n - fix build problem in pmac.c\n - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c\n - improve patch description\n\nChanges in behavior caused by this patch:\n- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change\n PIO mode if it821x controller is in \"smart\" mode\n- removal of two debugging printk-s (from cs5530.c and sc1200.c)\n- transfer modes 0x00-0x07 passed from user space may be programmed twice on\n the device (not really an issue since 0x00 is not supported correctly by\n any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7eff2e7a8b65c25920207324e56611150eb1cd9a", "tree": "02a0eeba9d25d996233e30c18f258dfae0ae2139", "parents": [ "8380770c842faef3001e44662953d64ad9a93663" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Tue Aug 14 15:15:12 2007 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Oct 12 14:51:01 2007 -0700" }, "message": "Driver core: change add_uevent_var to use a struct\n\nThis changes the uevent buffer functions to use a struct instead of a\nlong list of parameters. It does no longer require the caller to do the\nproper buffer termination and size accounting, which is currently wrong\nin some places. It fixes a known bug where parts of the uevent\nenvironment are overwritten because of wrong index calculations.\n\nMany thanks to Mathieu Desnoyers for finding bugs and improving the\nerror handling.\n\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nCc: Mathieu Desnoyers \u003cmathieu.desnoyers@polymtl.ca\u003e\nCc: Cornelia Huck \u003ccornelia.huck@de.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "26bcb879c03254545a19c6700fe5bcef6f21e7b1", "tree": "dc35f1a7d7860fe0de268ff92189ff0884b689d3", "parents": [ "842c19ad6fc0dbd9ac9d2f8527466201802934cf" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "message": "ide: add ide_set{_max}_pio() (take 4)\n\n* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags\n and set them in ht6560, cmd640, cmd64x and sc1200 host drivers.\n\n* Add set_pio_mode_abuse() for checking if host driver has a non-standard\n -\u003etuneproc() implementation and use it in do_special().\n\n* Add ide_set_pio() for setting PIO mode (it uses hwif-\u003epio_mask to find\n the maximum PIO mode supported by the host), also add ide_set_max_pio()\n wrapper for ide_set_pio() to use for auto-tuning. Convert users of\n -\u003etuneproc to use ide_set{_max}_pio() where possible. This leaves only\n do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as\n a direct users of -\u003etuneproc.\n\n* Remove no longer needed ide_get_best_pio_mode() calls and printk-s\n reporting PIO mode selected from -\u003etuneproc implementations.\n\n* Rename -\u003etuneproc hook to -\u003eset_pio_mode and make \u0027pio\u0027 argument const.\n\n* Remove stale comment from ide_config_drive_speed().\n\nv2:\n* Fix \"ata_\" prefix (Noticed by Jeff).\n\nv3:\n* Minor cleanups/fixups per Sergei\u0027s suggestions.\n\nv4:\n* Fix compile problem in drivers/ide/pci/cmd640.c\n (Noticed by Andrew Morton).\n\n* Improve some -\u003eset_pio_mode comments.\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5e32132befa5d2cefadf3141fee0bbb40cd11f0e", "tree": "7bf2002e49b169d24b87a8fe71364875e04d1e90", "parents": [ "8cb1f567f4c0a2fde9cbf77c2af888a28cab3423" ], "author": { "name": "Shaohua Li", "email": "shaohua.li@intel.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "message": "ide: hook ACPI _PSx method to IDE power on/off\n\nACPI spec defines the sequence of IDE power on/off:\nPowering down:\n\tCall _GTM.\n\tPower down drive (calls _PS3 method and turns off power planes).\nPowering up:\n\tPower up drive (calls _PS0 method if present and turns on power planes).\n\tCall _STM passing info from _GTM (possibly modified), with ID data from\n\teach drive.\n\tInitialize the channel.\n\tMay modify the results of _GTF.\n\tFor each drive:\n\t\tCall _GTF.\n\t\tExecute task file (possibly modified).\nThis patch adds the missed _PS0/_PS3 methods call.\n\nSigned-off-by: Shaohua Li \u003cshaohua.li@intel.com\u003e\nAcked-by: Len Brown \u003clen.brown@intel.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b4e44369a380c1836d0983c2a5011099b7b26eb1", "tree": "c7be9a68f98d908c7822d65dcec4b3c21d9d7955", "parents": [ "7cfa7168f7a7730abf1aa2af4a7596d24edd4c21" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "message": "hpt366: MWDMA filter for SATA cards (take 2)\n\nThe Marvell bridge chips used on HighPoint SATA cards do not seem to support\nthe MWDMA modes (at least that could be seen in their so-called drivers :-),\nso the driver needs to account for this -- to achieve this:\n\n- add mdma_filter() method from the original patch by Bartlomiej Zolnierkiewicz\n with his consent;\n\n- install the method for all chips to only return empty mask if a SATA drive\n is detected on HPT372{AN]/374 chips...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "89636af25d75d8672aea05d258be357d0dc4bd70", "tree": "dc1960bb144f76c75e82928ed3d601b52a275999", "parents": [ "4bf9fdf7f21f118e2c5052ec8e46faf00eb5a4ea" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: add support for SCSI ioctls to ide-floppy\n\nNow that ide-floppy supports SG_IO we can add support for SCSI ioctls\n(except deprecated SCSI_IOCTL_SEND_COMMAND and legacy CDROM_SEND_PACKET\nones - we can add them later iff really needed).\n\nWhile at it remove handling of CDROMEJECT and CDROMCLOSETRAY ioctls from\ngeneric_ide_ioctl():\n\n- This prevents ide-{disk,tape,scsi} device drivers from obtaining\n REQ_TYPE_BLOCK_PC type requests which are currently unsupported by\n these drivers and which are potentially harmful (as reported by Andrew).\n\n- There is no functionality loss since aforementioned ioctls will now be\n handled by idefloppy_ioctl()-\u003escsi_cmd_ioctl() (for devices using\n ide-floppy driver) and by idecd_ioctl-\u003ecdrom_ioctl()-\u003escsi_cmd_ioctl()\n (for devices using ide-cd driver).\n\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nCc: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "74565073cbf6b3c1746ee623e97b2ba0fcd3fbb6", "tree": "8259a8e42a668e12e5e348a24945e5818583226e", "parents": [ "d281e9ad87f79fd01ce1fc2d2f258e2ee765bc5a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: remove stale changelog/comments/TODO from ide.c\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4099d14322149c7a467e4997b87be4ba8eb78697", "tree": "133a913d7f9c2dacaaaef5cfdf2ae6911dc21f4c", "parents": [ "6a824c92db4d606c324272c4eed366fb71672440" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: add PIO masks\n\n* Add ATA_PIO[0-6] defines to \u003clinux/ata.h\u003e.\n\n* Add -\u003epio_mask field to ide_pci_device_t and ide_hwif_t.\n\n* Add PIO masks to host drivers.\n\n\u003clinux/ata.h\u003e change ACK-ed by Jeff Garzik \u003cjeff@garzik.org\u003e.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6a824c92db4d606c324272c4eed366fb71672440", "tree": "72b398062fd582b85507b665120f0a5315548eaf", "parents": [ "2134758d2a5429325cee4d4ce8959af5314eeba1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "message": "ide: remove ide_find_best_pio_mode()\n\n* Add -\u003ehost_flags to ide_hwif_t to store ide_pci_device_t.host_flags,\n assign it in setup-pci.c:ide_pci_setup_ports().\n\n* Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags\n and teach ide_get_best_pio_mode() about them. Also remove needless\n !drive-\u003eid check while at it (drive-\u003eid is always present).\n\n* Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode()\n and then remove no longer needed ide_find_best_pio_mode().\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1985026d32e69ed6dac3ba0ef8ff10366f060ed3", "tree": "a355fde028462c4d6ae6cad9090011a73cb566a7", "parents": [ "8b0d4164b4ac151050953d78c97fcceade69eb3c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 15:57:42 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 15:57:42 2007 -0700" }, "message": "Revert drivers/ide/ide.c scsi_cmd_ioctl() usage changes\n\nThe old IDE driver is not ready to take generic SCSI commands, even if\nit uses them for some specific issues (ie the tray open/close ioctls for\nIDE CD-ROM\u0027s). Pointed out by Bartlomiej.\n\nI\u0027m sure we\u0027ll have it fixed properly soon enough, but for now we should\nnot allow it to cause problems.\n\nCc: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "45e79a3acdcf54113b3d7b23e9e64e6541dbfeb5", "tree": "b8e7598b26ce446577e162189e635f6b87b10a5b", "parents": [ "7e75d73080d822d2bbbd5b0f7f293719dd1f9109" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Mon Jul 09 12:39:20 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jul 16 08:52:45 2007 +0200" }, "message": "bsg: add a request_queue argument to scsi_cmd_ioctl()\n\nbsg uses scsi_cmd_ioctl() for some SCSI/sg ioctl\ncommands. scsi_cmd_ioctl() gets a request queue from a gendisk\narguement. This prevents bsg being bound to SCSI devices that don\u0027t\nhave a gendisk (like OSD). This adds a request_queue argument to\nscsi_cmd_ioctl(). The SCSI/sg ioctl commands doesn\u0027t use a gendisk so\nit\u0027s safe for any SCSI devices to use scsi_cmd_ioctl().\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "3d6392cfbd7dc11f23058e3493683afab4ac13a3", "tree": "70c2b65c479f5feb7a5214a4a4930d489a069b1f", "parents": [ "8f41958bdd577731f7411c9605cfaa9db6766809" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jul 09 12:38:05 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jul 16 08:52:44 2007 +0200" }, "message": "bsg: support for full generic block layer SG v3\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb", "tree": "f61c34da6092f2f1a97a78da567afc59ad40850b", "parents": [ "75b1d97535327d0428c6bffd9d5407e65546fd5d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "ide: add short cables support\n\nThis patch allows users to override both host and device side cable detection\nwith \"ideX\u003data66\" kernel parameter. Thanks to this it should be now possible\nto use UDMA \u003e 2 modes on systems (laptops mainly) which use short 40-pin cable\ninstead of 80-pin one.\n\nNext patches add automatic detection of some systems using short cables.\n\nChanges:\n\n* Rename hwif-\u003eudma_four to hwif-\u003ecbl and make it u8.\n\n* Convert all existing users accordingly (use ATA_CBL_* defines while at it). \n\n* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().\n\n* Use ATA_CBL_PATA40_SHORT for \"ideX\u003data66\" kernel parameter.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "f9383c4269d264c3cf563bd2de365891f6592ebd", "tree": "7f1f3525c51237dc5806d17dd2c68c19d47a493b", "parents": [ "1b9da32a2855afa3c5f27690e03a33dc97410c42" ], "author": { "name": "Matthias Kaehlcke", "email": "matthias.kaehlcke@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "message": "ide: use mutex instead of ide_setting_sem semaphore in IDE driver\n\nThe IDE driver uses a semaphore as mutex.\nUse the mutex API instead of the (binary) semaphore.\n\nSigned-off-by: Matthias Kaehlcke \u003cmatthias.kaehlcke@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n--\n\n" }, { "commit": "ef29888ea8e1fdc499e995260195b66fc91d2728", "tree": "aa042c07a63de5bf4147ab819f89724ad9838877", "parents": [ "c283f5dbe31920ca70b80a594a97bfaa2a28be13" ], "author": { "name": "Matthias Kaehlcke", "email": "matthias.kaehlcke@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "message": "ide: use mutex instead of ide_cfg_sem semaphore in IDE driver\n\nThe IDE driver uses a semaphore as mutex.\nUse the mutex API instead of the (binary) semaphore.\n\nSigned-off-by: Matthias Kaehlcke \u003cmatthias.kaehlcke@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c283f5dbe31920ca70b80a594a97bfaa2a28be13", "tree": "891268bfec27d88bb9c5773026dcf950afe063d9", "parents": [ "841d2a9bf16471716ba3a5172d24aa40a2ea9398" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "message": "ide: make void and rename ide_dma_timeout() method\n\nSince ide_dma_timeout() method\u0027s result is discarded, make it return \u0027void\u0027.\nWhile at it, drop \u0027ide_\u0027 from the method\u0027s name, drop the \u0027__\u0027 prefix from\nthe default method\u0027s name, and do some cleanups in this method driver-wise:\n\n- in ide-dma.c, au1xxx-ide.c, and pdc202xx_old.c, define/use \u0027hwif\u0027 variable;\n\n- in au1xxx-ide.c, get rid of commented out printk();\n\n- in sl82c105.c, get rid of unnecessary variables.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "841d2a9bf16471716ba3a5172d24aa40a2ea9398", "tree": "f836d41ed70bf3efd6350c293c0c31a40ef4f900", "parents": [ "b740d8846e2e184909e9f74d4ad9d67ae0e084ea" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "message": "ide: make void and rename ide_dma_lostirq() method\n\nSince ide_dma_lostirq() method\u0027s result is discarded, make it return \u0027void\u0027.\nWhile at it, rename the method to dma_lost_irq(), drop the \u0027__\u0027 prefix from the\ndefault method\u0027s name, and do some cleanups in this method driver-wise:\n\n- in aec62xx.c, rename the method in accordance with other drivers, and get rid\n of unnecessary variables there;\n\n- in pdc202xx_old.c, define/use \u0027hwif\u0027 variable;\n\n- in sgiioc4.c, rearrange the code to call the resetproc() method directly.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ce9b2b0abbf019d5259eb089a1cc256852930f67", "tree": "c60d73f008d1c70002bef6b35901e4105269bc12", "parents": [ "d09c6b809432668371b5de9102f4f9aa6a7c79cc" ], "author": { "name": "Rafael J. Wysocki", "email": "rjw@sisk.pl", "time": "Sat Jun 16 02:24:43 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jun 16 02:24:43 2007 +0200" }, "message": "Resume from RAM on HPC nx6325 broken\n\ngeneric_ide_resume() should check if dev-\u003edriver is not NULL before applying\nto_ide_driver() to it. Fix that.\n\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0d2157f78d17fcee17791f54959e67cc0af0da74", "tree": "22782319df55322375f5fe3b8c23d1591e3fbcf0", "parents": [ "0380dad45e4f5a606025cc4df2a2cd26af08796b" ], "author": { "name": "Lee Trager", "email": "lt73@cs.drexel.edu", "time": "Fri Jun 08 15:14:30 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jun 08 15:14:30 2007 +0200" }, "message": "ide: HPA detect from resume\n\nCurrently when system which have HPA require HPA to be detected and\ndisabled upon resume from RAM or disk. The current IDE drivers do not do\nthis nor does libata (obviously it since it doesn\u0027t support HPA yet).\n\nI have implemented this into the current IDE drivers and it has been\ntested by many others since 7/15/2006 in bug number 6840:\n\n\thttp://bugzilla.kernel.org/show_bug.cgi?id\u003d6840\n\nand it has been confirmed to work fine with no problems.\n\nbart: added drv !\u003d NULL check to generic_ide_suspend()\n\nFrom: Lee Trager \u003clt73@cs.drexel.edu\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "793a97228d3da876f42b7fb4d4a52cc8cc86dc81", "tree": "ce76adb97bca7089e8bc96cb774d90fb3e254926", "parents": [ "7f86723a60d287be19aee620277184f9f5455283" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:43 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:43 2007 +0200" }, "message": "ide: always disable DMA before tuning it\n\nide_start_power_step() and set_using_dma() were missing -\u003edma_off_quietly\ncall (comment in probe_hwif() states that DMA should be always cleared before\ntuning is attempted). Fix it.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6d208b39c45edee5def6c201fcd51561c5a39828", "tree": "55645d2b6173e3161d12e5c9efdc4bd052b75b56", "parents": [ "5cbf79cdb37be2aa2a1b4fa94144526b14557060" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "message": "ide: legacy PCI bus order probing fixes\n\nIDE PCI host drivers should register themselves with IDE core only when\nIDE driver is built-in, otherwise (IDE driver is modular and thus IDE PCI\nhost drivers are also modular) the code has no effect and just complicates\nthe probing.\n\nFix it by adding new config option CONFIG_IDEPCI_PCIBUS (defined only when\nneeded and invisible to the user) and covering by #ifdef/#endif the code\nin question. It turned out that \"ide\u003dreverse\" was silently accepted but did\nnothing in case when IDE driver was modular, this is fixed now.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "5cbf79cdb37be2aa2a1b4fa94144526b14557060", "tree": "1fcfbc1248b9904e5890cc593f018ee0a8a53238", "parents": [ "869c56ee9de1b72cd3f8ab9cdfbd3601e55c61f2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "message": "ide: add ide_proc_register_port()\n\n* create_proc_ide_interfaces() tries to add /proc entries for every probed\n and initialized IDE port, replace it by ide_proc_register_port() which does\n it only for the given port (also rename destroy_proc_ide_interface() to\n ide_proc_unregister_port() for consistency)\n \n* convert {create,destroy}_proc_ide_interface[s]() users to use new functions\n\n* pmac driver depended on proc_ide_create() to add /proc port entries, fix it\n \n* au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic\n driver (CONFIG_IDE_GENERIC\u003dy) to add port /proc entries, fix them\n\n* there is now no need to add /proc entries for IDE ports in proc_ide_create()\n so don\u0027t do it\n\n* proc_ide_create() needs now to be called before drivers are probed - fix it,\n while at it make proc_ide_create() create /proc \"ide\" directory\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "869c56ee9de1b72cd3f8ab9cdfbd3601e55c61f2", "tree": "0f295ba89c774f9a20b2b089a29f288cd80b8094", "parents": [ "7f8f48af0861c38c28d4abd550102643e0ea9e6a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: add \"initializing\" argument to ide_register_hw()\n\nAdd \"initializing\" argument to ide_register_hw() and use it instead of ide.c\nwide variable of the same name. Update all users of ide_register_hw()\naccordingly.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7662d046df09e80680b77b68de896beab45e675e", "tree": "ea2281c59399b3867fb37e1005a0f0e0d2170c5d", "parents": [ "1497943ee692aa7519fa972d0e3a339649bf3a96" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: move IDE settings handling to ide-proc.c\n\n* move\n\t__ide_add_setting()\n\tide_add_setting()\n\t__ide_remove_setting()\n\tauto_remove_settings()\n\tide_find_setting_by_name()\n\tide_read_setting()\n\tide_write_setting()\n\tset_xfer_rate()\n\tide_add_generic_settings()\n\tide_register_subdriver()\n\tide_unregister_subdriver()\n\n from ide.c to ide-proc.c\n\n* set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it\n\n* rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(),\n update device drivers to use new names\n\n* add CONFIG_IDE_PROC_FS\u003dn versions of ide_proc_[un]register_driver()\n and ide_add_generic_settings()\n\n* make ide_find_setting_by_name(), ide_{read,write}_setting()\n and ide_{add,remove}_proc_entries() static\n\n* cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef,\n also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc\n\n* remove bogus comment from ide.h\n\n* cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t\n\nBesides saner code this patch results in the IDE core smaller by ~2 kB\n(on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS\u003dn.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1497943ee692aa7519fa972d0e3a339649bf3a96", "tree": "dc70ee9731f66dd323ddb397380b62c0c2977add", "parents": [ "ecfd80e4a514123070b4cfb674b817ba75055df2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: split off ioctl handling from IDE settings (v2)\n\n* do write permission and min/max checks in ide_procset_t functions\n\n* ide-disk.c: drive-\u003eid is always available so cleanup \"multcount\" setting\n accordingly\n\n* ide-disk.c: \"address\" setting was incorrectly defined as type TYPE_INTA,\n fix it by using type TYPE_BYTE and updating ide_drive_t-\u003eadressing field,\n the bug didn\u0027t trigger because this IDE setting uses custom -\u003eset function\n\n* ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl\n\n* ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl\n\n* handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl()\n instead of using IDE settings to deal with them\n\n* remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl\n fields from ide_settings_t, also remove now unused TYPE_INTA handling\n\nv2:\n* add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ecfd80e4a514123070b4cfb674b817ba75055df2", "tree": "956baa39e22030d139803b7585bd71e91c637bb5", "parents": [ "29e744d088e3555f4efbdf390f01088dd66993b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "message": "ide: make /proc/ide/ optional\n\nAll important information/features should be already available through\nsysfs and ioctl interfaces.\n\nAdd CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option,\ndisabling it makes IDE driver ~5 kB smaller (on x86-32).\n\nWhile at it add CONFIG_PROC_FS\u003dn versions of proc_ide_{create,destroy}()\nand remove no longer needed #ifdefs.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2d5eaa6dd744a641e75503232a01f52d0768884c", "tree": "0736bd00ea3bd032d601d0a676c998cb043b877a", "parents": [ "18137207236285989dfc0ee7f929b954199228f3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "message": "ide: rework the code for selecting the best DMA transfer mode (v3)\n\nDepends on the \"ide: fix UDMA/MWDMA/SWDMA masks\" patch.\n\n* add ide_hwif_t.udma_filter hook for filtering UDMA mask\n (use it in alim15x3, hpt366, siimage and serverworks drivers)\n* add ide_max_dma_mode() for finding best DMA mode for the device\n (loosely based on some older libata-core.c code)\n* convert ide_dma_speed() users to use ide_max_dma_mode()\n* make ide_rate_filter() take \"ide_drive_t *drive\" as an argument instead\n of \"u8 mode\" and teach it to how to use UDMA mask to do filtering\n* use ide_rate_filter() in hpt366 driver\n* remove no longer needed ide_dma_speed() and *_ratemask()\n* unexport eighty_ninty_three()\n\nv2:\n* rename -\u003efilter_udma_mask to -\u003eudma_filter\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space\n originated transfer mode change requests when 100MHz clock is used)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "18137207236285989dfc0ee7f929b954199228f3", "tree": "d55f1287ae64318190e18cb7a64ca514c76c3414", "parents": [ "de372ecd80a42c4fb485c7232475301a18d05184" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:07 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:07 2007 +0200" }, "message": "ide: fix UDMA/MWDMA/SWDMA masks (v3)\n\n* use 0x00 instead of 0x80 to disable -\u003e{ultra,mwdma,swdma}_mask\n* add udma_mask field to ide_pci_device_t and use it to initialize\n -\u003eultra_mask in aec62xx, cmd64x, pdc202xx_{new,old} and piix drivers\n* fix UDMA masks to match with chipset specific *_ratemask()\n (alim15x3, hpt366, serverworks and siimage drivers need UDMA mask\n filtering method - done in the next patch)\n\nv2:\n* piix: fix cable detection for 82801AA_1 and 82372FB_1\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n* cmd64x: use hwif-\u003ecds-\u003eudma_mask\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n* aec62xx: fix newly introduced bug - check DMA status not command register\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* piix: use hwif-\u003ecds-\u003eudma_mask\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "a7a832de9e9624bcf069a5369c3c38ba2f44d460", "tree": "3776f380d5031de1e0c6fbe248bba2bbfe1cf5d1", "parents": [ "76ca1af10e28021e1894c5703da42b5e7bff1771" ], "author": { "name": "Danny Kukawka", "email": "dkukawka@suse.de", "time": "Tue Apr 10 22:39:14 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Apr 10 22:39:14 2007 +0200" }, "message": "ide: add \"optical\" to sysfs \"media\" attribute\n\nAdd \"optical\" to sysfs \"media\" attribute as already in /proc\n\nSigned-off-by: Danny Kukawka \u003cdkukawka@suse.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8799620400b0b1a4729d8be828b5bfb3d2a8db1a", "tree": "4c5f3bb3360dddcc9638c4e92ddb7f1f2e0b1578", "parents": [ "f68d9320cd06fdec19735143b42e5197b63165b4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Mar 26 23:03:19 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Mar 26 23:03:19 2007 +0200" }, "message": "ide: fix locking for manual DMA enable/disable (\"hdparm -d\")\n\nSince hwif-\u003eide_dma_check and hwif-\u003eide_dma_on never queue any commands\n(ide_config_drive_speed() sets transfer mode using polling and has no error\nrecovery) we are safe with setting hwgroup-\u003ebusy for the time while DMA\nsetting for a drive is changed (so it won\u0027t race against I/O commands in fly).\n\nI audited briefly all -\u003eide_dma_check/-\u003eide_dma_on/-\u003etuneproc/-\u003espeedproc\nimplementations and they all look OK wrt to this change.\n\nThis patch finally allowed me to close kernel bugzilla bug #8169\n(once again thanks to Patrick Horn for reporting the issue \u0026 testing patches).\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "120b9cfddff2e398fece07c5e127f3fdbb660441", "tree": "25b493c4674a823069cac0f4b808b917439ea1df", "parents": [ "6f5050a96c9e0521f42a3a1d676c7ad9815f62ad" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 17 21:57:41 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 17 21:57:41 2007 +0100" }, "message": "ide: remove CONFIG_IDEDMA_{ICS,PCI}_AUTO config options\n\nAll modern distributions have been setting these options to \"y\" for ages.\n(additionally \"n\" cases have been obsoleted for few years). Therefore use\nDMA by default and remove CONFIG_IDEDMA_{ICS,PCI}_AUTO (also remove no longer\nneeded CONFIG_IDEDMA_AUTO). This fixes DMA support for rare configurations\nwhere CONFIG_IDEDMA_{ICS,PCI}_AUTO was set to \"n\" but \"hdparm -d 1\" was used\nto enable DMA support and which were forced to PIO mode by \"ide: don\u0027t allow\nDMA to be enabled if CONFIG_IDEDMA_{ICS,PCI}_AUTO\u003dn\" patch. There is no\nfunctionality loss because \"ide\u003dnodma\" kernel option is still available.\n\nCc: Patrick Horn \u003cphrh@yahoo.com\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Russell King \u003crmk+lkml@arm.linux.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "849138827c962589ac50496fa7feeb2a2d51b467", "tree": "3b7988c756068f00ccf8a1440a0f3709a241bcad", "parents": [ "b6209a90eca8c9a464bf9c5b91741fb125185619" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:55 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:55 2007 +0100" }, "message": "ide: make legacy IDE VLB modules check for the \"probe\" kernel params (v2)\n\nLegacy IDE VLB host drivers didn\u0027t check for \"probe\" options when compiled\nas modules, which was obviously wrong as we don\u0027t want module to poke at\nrandom I/O ports by simply loading it. Fix it by adding \"probe\" module param\nto legacy IDE VLB host drivers.\n\nv2:\n* don\u0027t obsolete old \"ide0\u003ddtc2278/ht6560b/qd65xx/ali14xx/umc8672\"\n IDE driver options yet (per Alan Cox\u0027s request) and enhance documentation\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b6209a90eca8c9a464bf9c5b91741fb125185619", "tree": "1abca15051b7654571e7286fd9ae5dabf44a0816", "parents": [ "e76ecf86da99383f59f4c85f594403c5c3c1fe91" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:55 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:55 2007 +0100" }, "message": "ide: remove some obsoleted kernel params (v2)\n\nRemove\n\n* \"hdx\u003dserialize\"\n* \"idex\u003dnoautotune\"\n* \"idex\u003dautotune\"\n\nkernel params, they have been obsoleted for ages.\n\n\"idex\u003dserialize\", \"hdx\u003dnoautotune\" and \"hdx\u003dautotune\" are still available\nso there is no funcionality loss caused by this patch.\n\nv2:\n\n* fix CONFIG_BLK_DEV_4DRIVES\u003dy build broken by version 1 of the patch\n [ /me wearing brown paper bag ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "846c11abc7934a523a665a3b702358e6f2998e3e", "tree": "60f090cd6846fee09653dcc8345e56474f0c2ddf", "parents": [ "8693d3e47b5cd95e1a513f90bc5e0467ce885e24" ], "author": { "name": "Alan Cox", "email": "alan@redhat.com", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "message": "ide: remove a ton of pointless #undef REALLY_SLOW_IO\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9e5755bce00bb563739aeb0f09932a1907521167", "tree": "4a16eb1f094f3e5df3eed09870dd0cffb9cf1143", "parents": [ "ed89616786d47093525a5dc039b1f502f5ada954" ], "author": { "name": "Andrew Morton", "email": "akpm@osdl.org", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "message": "ide: fix pmac breakage\n\nFix breakage added in the IDE devel tree.\n\nAdd header, then fix\n\ndrivers/ide/ppc/pmac.c: In function `pmac_ide_setup_dma\u0027:\ndrivers/ide/ppc/pmac.c:2044: warning: assignment from incompatible pointer type\ndrivers/ide/ppc/pmac.c: In function `pmac_ide_dma_host_on\u0027:\ndrivers/ide/ppc/pmac.c:1989: warning: control reaches end of non-void function\ninclude/linux/pci.h: In function `pmac_ide_init\u0027:\ndrivers/ide/ppc/pmac.c:1563: warning: ignoring return value of `pci_register_driver\u0027, declared with attribute warn_unused_result\n\nThen add some apparently-long-missing error handling.\n\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ccf352894ceef79d40d015e1deee4c46c3aa42ed", "tree": "e30b2b8a4c30e2ef1719ce9780322e671ebe3c43", "parents": [ "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_host_on void (v2)\n\n* since ide_hwif_t.ide_dma_host_on is called either when drive-\u003eusing_dma \u003d\u003d 1\n or when return value is discarded make it void, also drop \"ide_\" prefix\n* make __ide_dma_host_on() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_on() to atiixp_dma_host_on()\n and sgiioc4_ide_dma_host_on() to sgiioc4_dma_host_on().\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31", "tree": "079930f23b3d14e4ad29ab972bc6d91fde52e5f0", "parents": [ "3608b5d71a52c053787dbad6af20c25f7e0b75a9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)\n\n* since ide_hwif_t.ide_dma_{host_off,off_quietly} always return \u00270\u0027\n make these functions void and while at it drop \"ide_\" prefix\n* fix comment for __ide_dma_off_quietly()\n* make __ide_dma_{host_off,off_quietly,off}() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(),\n sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}()\n and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly()\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "3608b5d71a52c053787dbad6af20c25f7e0b75a9", "tree": "5bd6ac777d32d8426e65e3c31cc1587674771e8c", "parents": [ "9ef5791e1be91007951477b8ed1530ac1166a8e7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: add ide_set_dma() helper (v2)\n\n* add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return\n -1 when DMA needs to be disabled (\u003d\u003d need to call -\u003eide_dma_off_quietly)\n 0 when DMA needs to be enabled (\u003d\u003d need to call -\u003eide_dma_on)\n 1 when DMA setting shouldn\u0027t be changed\n* fix IDE code to use ide_set_dma() instead if using -\u003eide_dma_check directly\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2ad1e558a2305c2b3d5099ee2f4a5929307c20ca", "tree": "79a530648cc26184c3b2e3933c0ebad614329b5b", "parents": [ "0ecdca26e556eae9668ce6de9554757dddb942ef" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: convert ide_hwif_t.mmio into flag (v2)\n\nAll users of -\u003emmio \u003d\u003d 1 are gone so convert -\u003emmio into flag.\n\nNoticed by Alan Cox.\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "0ecdca26e556eae9668ce6de9554757dddb942ef", "tree": "21d62c01d0c0d5aeea2524252ed8dec6ca20b6d4", "parents": [ "7569e8dc2213ecc47024ea5edbadc8736487d926" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: use PIO/MMIO operations directly where possible (v2)\n\nThis results in smaller/faster/simpler code and allows future optimizations.\nAlso remove no longer needed ide[_mm]_{inl,outl}() and ide_hwif_t.{INL,OUTL}.\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "c1607e1af238b823a2158a18ff6c89144ce38c6c", "tree": "75f51cbc38e306bbdb2f7eb4d1413991e4ee7948", "parents": [ "6679054895f9b1dc676d14637306b297451f1ac0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "message": "ide: remove write-only ide_hwif_t.no_dsc flag\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "f0dd8712eb8cc5687b4582fbc41cfbcd55bba0d2", "tree": "190bc6cf68e056ae72d895dc2c9074de2c0ed18f", "parents": [ "fdb77da4ca68ae17a39d58c9d5c00479a7e124c0" ], "author": { "name": "Albert Lee", "email": "albertcc@tw.ibm.com", "time": "Sat Feb 17 02:40:21 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:21 2007 +0100" }, "message": "ide: clear bmdma status in ide_intr() for ICHx controllers (revised #4)\n\npatch 1/2 (revised):\n- Fix drive-\u003ewaiting_for_dma to work with CDB-intr devices.\n- Do the dma status clearing in ide_intr() and add a new\n hwif-\u003eide_dma_clear_irq for Intel ICHx controllers.\n\nRevised per Alan, Sergei and Bart\u0027s advice.\n\nPatch against 2.6.20-rc6. Tested ok on my ICH4 and pdc20275 adapters.\nPlease review/apply, thanks.\n\nSigned-off-by: Albert Lee \u003calbertcc@tw.ibm.com\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \"Adam W. Hawks\" \u003cawhawks@us.ibm.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e3a59b4d9378522479609042836ae930305a67fe", "tree": "1dd41aefac4d7f370dd3798818c2ca36c654fe7c", "parents": [ "78281c5350029e3fa21758d6db9b45ffc7bf72a1" ], "author": { "name": "Hannes Reinecke", "email": "hare@suse.de", "time": "Wed Feb 07 18:19:37 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 07 18:19:37 2007 +0100" }, "message": "ACPI support for IDE devices\n\nThis patch implements ACPI integration for generic IDE devices.\nThe ACPI spec mandates that some methods are called during suspend and\nresume. And consequently there most modern Laptops cannot resume\nproperly without it.\n\nAccording to the spec, we should call \u0027_GTM\u0027 (Get Timing) upon suspend\nto store the current IDE adapter settings.\nUpon resume we should call \u0027_STM\u0027 (Set Timing) to initialize the\nadapter with the stored settings; afterwards \u0027_GTF\u0027 (Get Taskfile)\nshould be called which returns a buffer with some IDE initialisation\ncommands. Those commands should be passed to the drive.\n\nThere are two module params which control the behaviour of this patch:\n\n\u0027ide\u003dnoacpi\u0027\n\tDo not call any ACPI methods (Disables any ACPI method calls)\n\u0027ide\u003dacpigtf\u0027\n\tEnable execution of _GTF methods upon resume.\n\tHas no effect if \u0027ide\u003dnoacpi\u0027 is set.\n\u0027ide\u003dacpionboot\u0027\n\tEnable execution of ACPI methods during boot.\n\tThis might be required on some machines if \u0027ide\u003dacpigtf\u0027 is\n\tselected as some machines modify the _GTF information\n\tdepending on the drive identification passed down with _STM.\n\nSigned-off-by: Hannes Reinecke \u003chare@suse.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "eb7972271720bfc64dc8bacc5b15f874c0bcc859", "tree": "043945898426a305044b4624bb067b69ae03ebb2", "parents": [ "aaba6d4bf6f2a52a0c30ad1da4374ba24bd7163b" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Thu Feb 01 13:52:38 2007 +0000" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Feb 01 16:17:06 2007 -0800" }, "message": "[PATCH] ide section fixes\n\na) cleanup_module() should be __exit\nb) externs should match reality\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6855036aa035913bc2bfb31c41576a49f42ecd5f", "tree": "7524fa60ef1a36ea6630a9b6613cb7099875569d", "parents": [ "82ab1eeceba6705cd5a8815c48eb03af1dada744" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat Jan 27 13:47:02 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 27 13:47:02 2007 +0100" }, "message": "ide: unregister idepnp driver on unload\n\nidepnp driver is registered as a pnp driver on ide init but doesn\u0027t\nget unregistered on ide unload causing driver list corruption and\neventually oops. Fix it.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9a2239b1174bdf0952a21ed328cd74240d2dd173", "tree": "04082ce82de232a065436ed588edc56eb47018a0", "parents": [ "23a1b2a78705caa2ecaccf8422a1e22eaca59574" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Wed Dec 06 20:36:13 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.osdl.org", "time": "Thu Dec 07 08:39:32 2006 -0800" }, "message": "[PATCH] lockdep: fix ide/proc interaction\n\n rmmod/3080 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:\n (proc_subdir_lock){--..}, at: [\u003cc04a33b0\u003e] remove_proc_entry+0x40/0x191\n\n and this task is already holding:\n (ide_lock){++..}, at: [\u003cc05651a2\u003e] ide_unregister_subdriver+0x39/0xc8\n which would create a new lock dependency:\n (ide_lock){++..} -\u003e (proc_subdir_lock){--..}\n\n but this new dependency connects a hard-irq-safe lock:\n (ide_lock){++..}\n ... which became hard-irq-safe at:\n [\u003cc043c458\u003e] lock_acquire+0x4b/0x6b\n [\u003cc06129d7\u003e] _spin_lock_irqsave+0x22/0x32\n [\u003cc0567870\u003e] ide_intr+0x17/0x1a9\n [\u003cc044eb31\u003e] handle_IRQ_event+0x20/0x4d\n [\u003cc044ebf2\u003e] __do_IRQ+0x94/0xef\n [\u003cc0406771\u003e] do_IRQ+0x9e/0xbd\n\n to a hard-irq-unsafe lock:\n (proc_subdir_lock){--..}\n ... which became hard-irq-unsafe at:\n ... [\u003cc043c458\u003e] lock_acquire+0x4b/0x6b\n [\u003cc06126ab\u003e] _spin_lock+0x19/0x28\n [\u003cc04a32f2\u003e] xlate_proc_name+0x1b/0x99\n [\u003cc04a3547\u003e] proc_create+0x46/0xdf\n [\u003cc04a3642\u003e] create_proc_entry+0x62/0xa5\n [\u003cc07c1972\u003e] proc_misc_init+0x1c/0x1d2\n [\u003cc07c1844\u003e] proc_root_init+0x4c/0xe9\n [\u003cc07ad703\u003e] start_kernel+0x294/0x3b3\n\nMove ide_remove_proc_entries() out from under ide_lock; there is nothing\nthat indicates that this is needed.\n\nIn specific, the call to ide_add_proc_entries() is unprotected, and there\nis nothing else in the file using the respective -\u003eproc fields. Also the\nlock order around destroy_proc_ide_interface() suggests this.\n\nAlan sayeth:\n\n proc_ide_write_settings walks the setting list under ide_setting_sem, read\n ditto. remove_proc_entry is doing proc side housekeeping.\n\n Looks fine to me, although that old code is such a mess anything could be\n going on.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "913759ac90a727b86da72efcfb70931f497d1cb7", "tree": "f95e10f757e93eca8eacbf03985c09994ec4ef46", "parents": [ "b86cc29dc42203588264d917e88134bdd500b0d7" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Tue Oct 03 01:14:33 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:08 2006 -0700" }, "message": "[PATCH] ide: Fix crash on repeated reset\n\nMichal Miroslaw reported a problem (bugzilla #7023) where a user initiated\nreset while the IDE layer was already resetting the channel caused a crash,\nand provided a rough fix.\n\nThis is a slightly cleaner version of the fix which tracks the reset state\nand blocks further reset requests while a reset is in progress.\n\nNote this is not a security issue - random end users can\u0027t access the\nioctl in question anyway.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Michal Miroslaw \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "349ae23fe7379a42973bcb1c85f7d43ec583c17d", "tree": "2f885e437a59a23f04161e9761b86a8421ab6ff7", "parents": [ "5ac24697699b394cdebac0a2329ce3af247d6a3b" ], "author": { "name": "Randy Dunlap", "email": "rdunlap@xenotime.net", "time": "Tue Oct 03 01:14:23 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:08 2006 -0700" }, "message": "[PATCH] IDE core: driver layer error checking\n\nCheck driver layer return values in IDE core.\n\nSigned-off-by: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "020e322de3ff75d32daa58e431aad07071da27c6", "tree": "127509ae4fe684bd557285e246b835fa6a9d5ecd", "parents": [ "bbb3bbdb0f78cb02451daf5687a99627f7ad1140" ], "author": { "name": "Sergei Shtylylov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Oct 03 01:14:13 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:07 2006 -0700" }, "message": "[PATCH] IDE: claim extra DMA ports regardless of channel\n\n- Claim extra DMA I/O ports regardless of what IDE channels are\n present/enabled.\n\n- Remove extra ports handling from ide_mapped_mmio_dma() since it\u0027s not\n applicable to the custom-mapping IDE drivers.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "c00895ab2f08df7044e58ee01c38bf0a661ea0eb", "tree": "95dee4eb76042087c4b8d43a5841b6bae85b8cf3", "parents": [ "8a8e674cb1dafc818ffea93d97e4c1c1f01fdbb6" ], "author": { "name": "Jens Axboe", "email": "axboe@kernel.dk", "time": "Sat Sep 30 20:29:12 2006 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@kernel.dk", "time": "Sat Sep 30 20:29:12 2006 +0200" }, "message": "[PATCH] Remove -\u003ewaiting member from struct request\n\nAs the comments indicates in blkdev.h, we can fold it into -\u003eend_io_data\nusage as that is really what -\u003ewaiting is. Fixup the users of\nblk_end_sync_rq().\n\nSigned-off-by: Jens Axboe \u003caxboe@kernel.dk\u003e\n" }, { "commit": "4aff5e2333c9a1609662f2091f55c3f6fffdad36", "tree": "b73d8c2b7c1bdc03d3313c108da7dfc95ee95525", "parents": [ "77ed74da26f50fa28471571ee7a2251b77526d84" ], "author": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Thu Aug 10 08:44:47 2006 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Sat Sep 30 20:23:37 2006 +0200" }, "message": "[PATCH] Split struct request -\u003eflags into two parts\n\nRight now -\u003eflags is a bit of a mess: some are request types, and\nothers are just modifiers. Clean this up by splitting it into\n-\u003ecmd_type and -\u003ecmd_flags. This allows introduction of generic\nLinux block message types, useful for sending generic Linux commands\nto block devices.\n\nSigned-off-by: Jens Axboe \u003caxboe@suse.de\u003e\n" }, { "commit": "b887d2e63c8857149ef59eb6e05adfaa018b8ebf", "tree": "e3efb4b1c095fd2960c32d8f253679a045bf26db", "parents": [ "82bb67f2c1f9ef438c56ac24e7dca027fe7289b5" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Mon Aug 14 23:11:05 2006 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Sep 25 21:08:37 2006 -0700" }, "message": "PM: PCI and IDE handle PM_EVENT_PRETHAW\n\nConvert some framework code to handle the new PRETHAW message.\n\n - IDE just treats it like a FREEZE.\n\n - The pci_choose_state() thingie still doesn\u0027t use PCI_D0 when it gets a\n FREEZE (and now PRETHAW) event, which seems rather buglike but wasn\u0027t\n something to change with this patch.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: \"Rafael J. Wysocki\" \u003crjw@sisk.pl\u003e\nCc: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "361934849e9c0418950bedf667732f36337d88b9", "tree": "a2f7d53d3ddf75c19421f972a03a44da00df0396", "parents": [ "64821324ca49f24be1a66f2f432108f96a24e596" ], "author": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Fri Jul 28 08:54:59 2006 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Fri Jul 28 08:54:59 2006 +0200" }, "message": "[PATCH] ide: option to disable cache flushes for buggy drives\n\nSome drives claim they support cache flushing, but get seriously\nconfused if you try. Add this option to be able to boot with\nbarriers enabled by default.\n\nSigned-off-by: Jens Axboe \u003caxboe@suse.de\u003e\n" }, { "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7", "tree": "6d98881fe91fd9583c109208d5c27131b93fa248", "parents": [ "e02169b682bc448ccdc819dc8639ed34a23cedd8" ], "author": { "name": "Jörn Engel", "email": "joern@wohnheim.fh-wedel.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "94f6c59dcf16f10a20fbe3d1f098b159433f94bd", "tree": "06ec8cdb07de07389aa80fb394724ac07615a887", "parents": [ "aa4148cfc7b3b93eeaf755a7d14f10afaffe9a96" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jun 20 21:15:16 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jun 26 12:25:06 2006 -0700" }, "message": "[PATCH] devfs: Remove devfs support from the ide subsystem.\n\nAlso removes the ide drive devfs_name field as it\u0027s no longer needed\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "ad3caddaa1708e506f20b8e25a4a8ae586fc7d5b", "tree": "60a79c55a71ed3ef7bc9daaea694995b034eb044", "parents": [ "b31dc66a54ad986b6b73bdc49c8efc17cbad1833" ], "author": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Tue Jun 13 08:46:57 2006 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Fri Jun 23 17:10:39 2006 +0200" }, "message": "[PATCH] Get rid of struct request request_pm_state member\n\nThe IDE power management can just use the -\u003eend_io_data member to store\nit\u0027s data.\n\nSigned-off-by: Jens Axboe \u003caxboe@suse.de\u003e\n" }, { "commit": "125e18745f16685f69a34fd6130d47598fc4bf54", "tree": "c97ed94b0525a572efa1bd4990a55b18be5d781d", "parents": [ "78ce89c92bc6eaf5933b5664bff64253a7103bd7" ], "author": { "name": "Eric Sesterhenn", "email": "snakebyte@gmx.de", "time": "Fri Jun 23 02:06:06 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Jun 23 07:43:08 2006 -0700" }, "message": "[PATCH] More BUG_ON conversion\n\nSigned-off-by: Eric Sesterhenn \u003csnakebyte@gmx.de\u003e\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nAcked-by: \"Salyzyn, Mark\" \u003cmark_salyzyn@adaptec.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "2c3e0262e0cb5395fe02cdf27c229ee7414ab0c0", "tree": "d375b705880fc70b8dc5029b81b697936f1bbce7", "parents": [ "daacf8bc0dd37a6ad3a87d1a667599e15940815e" ], "author": { "name": "Roman Zippel", "email": "zippel@linux-m68k.org", "time": "Fri Jun 23 02:04:51 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Jun 23 07:43:00 2006 -0700" }, "message": "[PATCH] m68k: completely initialize hw_regs_t in ide_setup_ports\n\nide_setup_ports does not completely initialize the hw_regs_t structure which\ncan cause random failures, as the structure is often on the stack. None of\nthe callers expect a partially initialized structure, i.e. none of them do\nany setup of their own before calling ide_setup_ports().\n\nSigned-off-by: Roman Zippel \u003czippel@linux-m68k.org\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "fbd8ad30596409070801832335d3ea8cf1513ded", "tree": "4612b4565fe8de01f28a72d439742c91995fec05", "parents": [ "c32ccd87bfd1414b0aabfcd8dbc7539ad23bcbaa" ], "author": { "name": "Sam Ravnborg", "email": "sam@ravnborg.org", "time": "Sat Mar 25 03:07:11 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sat Mar 25 08:22:53 2006 -0800" }, "message": "[PATCH] ide: fix section mismatch warning\n\nIn latest -mm ide-code.o gave a number of warnings like the following:\n\nWARNING: drivers/ide/ide-core.o - Section mismatch: reference to \\\n.init.text: from .text between \u0027init_module\u0027 (at offset 0x1f97) and \\\n\u0027cleanup_module\u0027\n\nThe warning was caused by init_module() calling parse_option() and\nide_init() both declared __init.\n\nDeclaring init_module() __init fixes the warnings.\n\nSigned-off-by: Sam Ravnborg \u003csam@ravnborg.org\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "9810933701a09f9c4dd0ad963d5ec2efb7df07b7", "tree": "a82e186d96e443099fc67d9788943befcba996b3", "parents": [ "3b6ce2497f091620dd4c172fc11d867a9b072dc5" ], "author": { "name": "Richard Purdie", "email": "rpurdie@rpsys.net", "time": "Fri Feb 03 03:04:55 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Feb 03 08:32:12 2006 -0800" }, "message": "[PATCH] stop CompactFlash devices being marked as removable\n\nThis patch stops CompactFlash devices being marked as removable. They are\nnot removable (as defined by Linux) as the media and device are\ninseparable. When a card is removed, the whole device is removed from the\nsystem and never sits in a media-less state.\n\nThis stops some nasty udev device creation/destruction loops.\n\nFurther, once this change is made, there is no need for ide to can be\nremoved from ide_drive_t.\n\nSigned-off-by: Richard Purdie \u003crpurdie@rpsys.net\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "4031bbe4bbec6c0fe50412ef7fb43a270b0f29f1", "tree": "1e1449ba492ab04d8c5fbc75f9761be237bcae72", "parents": [ "bbbe3a41f7ee529f7f4fdcc1bc1157234bac0766" ], "author": { "name": "Russell King", "email": "rmk@arm.linux.org.uk", "time": "Fri Jan 06 11:41:00 2006 +0000" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Jan 13 11:26:10 2006 -0800" }, "message": "[PATCH] Add ide_bus_type probe and remove methods\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "f36d4024caa3790606e43228a574157c45b73b22", "tree": "eb3d5e39d5fd83731bf608c4a7c424916e68c007", "parents": [ "3fe0c2776113c24b4b30374003f934cf44280db5" ], "author": { "name": "Aleksey Makarov", "email": "amakarov@ru.mvista.com", "time": "Mon Jan 09 15:59:27 2006 -0800" }, "committer": { "name": "Ingo Molnar", "email": "mingo@hera.kernel.org", "time": "Mon Jan 09 15:59:27 2006 -0800" }, "message": "[PATCH] mutex subsystem, semaphore to completion: IDE -\u003egendev_rel_sem\n\nThe patch changes semaphores that are initialized as\nlocked to complete().\n\nSource: MontaVista Software, Inc.\n\nModified-by: Steven Rostedt \u003crostedt@goodmis.org\u003e\n\nThe following patch is from Montavista. I modified it slightly.\nSemaphores are currently being used where it makes more sense for\ncompletions. This patch corrects that.\n\nSigned-off-by: Aleksey Makarov \u003camakarov@ru.mvista.com\u003e\nSigned-off-by: Steven Rostedt \u003crostedt@goodmis.org\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "a885c8c4316e1c1d2d2c8755da3f3d14f852528d", "tree": "e4f4e7a7657c0944d11c259f8f17ffcd6b2da0f5", "parents": [ "5b0ed2c64d8fdafb5fcfb3baabdd288628b1ff9b" ], "author": { "name": "Christoph Hellwig", "email": "hch@lst.de", "time": "Sun Jan 08 01:02:50 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Jan 08 20:13:54 2006 -0800" }, "message": "[PATCH] Add block_device_operations.getgeo block device method\n\nHDIO_GETGEO is implemented in most block drivers, and all of them have to\nduplicate the code to copy the structure to userspace, as well as getting\nthe start sector. This patch moves that to common code [1] and adds a\n-\u003egetgeo method to fill out the raw kernel hd_geometry structure. For many\ndrivers this means -\u003eioctl can go away now.\n\n[1] the s390 block drivers are odd in this respect. xpram sets -\u003estart\n to 4 always which seems more than odd, and the dasd driver shifts\n the start offset around, probably because of it\u0027s non-standard\n sector size.\n\nSigned-off-by: Christoph Hellwig \u003chch@lst.de\u003e\nCc: Jens Axboe \u003caxboe@suse.de\u003e\nCc: \u003cmike.miller@hp.com\u003e\nCc: Jeff Dike \u003cjdike@addtoit.com\u003e\nCc: Paolo Giarrusso \u003cblaisorblade@yahoo.it\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Neil Brown \u003cneilb@cse.unsw.edu.au\u003e\nCc: Markus Lidel \u003cMarkus.Lidel@shadowconnect.com\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: David Woodhouse \u003cdwmw2@infradead.org\u003e\nCc: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "263756ec228f1cdd49fc50b1f87001a4cebdfe12", "tree": "502925a94655348a768f25180e49126688100a8d", "parents": [ "f743ca5e10f4145e0b3e6d11b9b46171e16af7ce" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Mon Dec 12 18:03:44 2005 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jan 04 16:18:09 2006 -0800" }, "message": "[PATCH] ide: MODALIAS support for autoloading of ide-cd, ide-disk, ...\n\nIDE: MODALIAS support for autoloading of ide-cd, ide-disk, ...\n\nAdd MODULE_ALIAS to IDE midlayer modules: ide-disk, ide-cd, ide-floppy and\nide-tape, to autoload these modules depending on the probed media type of\nthe IDE device.\n\nIt is used by udev and replaces the former agent shell script of the hotplug\npackage, which was required to lookup the media type in the proc filesystem.\nUsing proc was racy, cause the media file is created after the hotplug event\nis sent out.\n\nThe module autoloading does not take any effect, until something like the\nfollowing udev rule is configured:\n SUBSYSTEM\u003d\u003d\"ide\", ACTION\u003d\u003d\"add\", ENV{MODALIAS}\u003d\u003d\"?*\", RUN+\u003d\"/sbin/modprobe $env{MODALIAS}\"\n\nThe module ide-scsi will not be autoloaded, cause it requires manual\nconfiguration. It can\u0027t be, and never was supported for automatic setup in\nthe hotplug package. Adding a MODULE_ALIAS to ide-scsi for all supported\nmedia types, would just lead to a default blacklist entry anyway.\n\n $ modinfo ide-disk\n filename: /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko\n description: ATA DISK Driver\n alias: ide:*m-disk*\n license: GPL\n ...\n\n $ modprobe -vn ide:m-disk\n insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko\n\n $ cat /sys/bus/ide/devices/0.0/modalias\n ide:m-disk\n\nIt also adds attributes to the IDE device:\n $ tree /sys/bus/ide/devices/0.0/\n /sys/bus/ide/devices/0.0/\n |-- bus -\u003e ../../../../../../../bus/ide\n |-- drivename\n |-- media\n |-- modalias\n |-- power\n | |-- state\n | `-- wakeup\n `-- uevent\n\n $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media}\n ide:m-disk\n hda\n disk\n\nSigned-off-by: Kay Sievers \u003ckay.sievers@suse.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "4349d5cdf28d46c22d467079e80ee9695dcec0ad", "tree": "f16b8cb1689a82ebb48d95f9be2f66b56fb62189", "parents": [ "a5ee3634630c218e86afc5bae2acb55b9e47625d" ], "author": { "name": "Hannes Reinecke", "email": "hare@suse.de", "time": "Wed Nov 09 22:47:18 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Nov 09 22:47:18 2005 +0100" }, "message": "[PATCH] ide: incorrect device link for ide-cs\n\nDevices driven by ide-cs will appear under /sys/devices instead of the\nappropriate PCMCIA device. To fix this I had to extend the hw_regs_t\nstructure with a \u0027struct device\u0027 field, which allows us to set the\nparent link for the appropriate hwif.\n\nSigned-off-by: Hannes Reinecke \u003chare@suse.de\u003e\nSigned-off-by: Jens Axboe \u003caxboe@suse.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "6044ec8882c726e325017bd948aa0cd94ad33abc", "tree": "3bfc5dc93434e8ad556540f6689abcd2699aa45d", "parents": [ "2ea7533060e361810c21b2f5ee02151c4dfb85d8" ], "author": { "name": "Jesper Juhl", "email": "jesper.juhl@gmail.com", "time": "Mon Nov 07 01:01:32 2005 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Nov 07 07:54:05 2005 -0800" }, "message": "[PATCH] kfree cleanup: misc remaining drivers\n\nThis is the remaining misc drivers/ part of the big kfree cleanup patch.\n\nRemove pointless checks for NULL prior to calling kfree() in misc files in\ndrivers/.\n\nSigned-off-by: Jesper Juhl \u003cjesper.juhl@gmail.com\u003e\nAcked-by: Aristeu Sergio Rozanski Filho \u003caris@cathedrallabs.org\u003e\nAcked-by: Roland Dreier \u003crolandd@cisco.com\u003e\nAcked-by: Pierre Ossman \u003cdrzeus@drzeus.cx\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nAcked-by: Len Brown \u003clen.brown@intel.com\u003e\nAcked-by: \"Antonino A. Daplas\" \u003cadaplas@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "f5e3c2faa20615e900ab26bd957f898400435924", "tree": "d3dd4c93539f155e3fd4ef18ae9cfe482ed1b340", "parents": [ "9c2153844d72ac92b6da0ee42f7f81fb0aa91f8a" ], "author": { "name": "Deepak Saxena", "email": "dsaxena@plexity.net", "time": "Mon Nov 07 01:01:25 2005 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Nov 07 07:54:00 2005 -0800" }, "message": "[PATCH] ide: kmalloc + memset -\u003e kzalloc conversion\n\nSigned-off-by: Deepak Saxena \u003cdsaxena@plexity.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "ca078bae813dd46c0f9b102fdfb4a3384641ff48", "tree": "e3348f5dcb24159a522941aa2e3ee40bc9e0589b", "parents": [ "829ca9a30a2ddb727981d80fabdbff2ea86bc9ea" ], "author": { "name": "Pavel Machek", "email": "pavel@ucw.cz", "time": "Sat Sep 03 15:56:57 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@evo.osdl.org", "time": "Mon Sep 05 00:06:16 2005 -0700" }, "message": "[PATCH] swsusp: switch pm_message_t to struct\n\nThis adds type-checking to pm_message_t, so that people can\u0027t confuse it\nwith int or u32. It also allows us to fix \"disk yoyo\" during suspend (disk\nspinning down/up/down).\n\n[We\u0027ve tried that before; since that cpufreq problems were fixed and I\u0027ve\ntried make allyes config and fixed resulting damage.]\n\nSigned-off-by: Pavel Machek \u003cpavel@suse.cz\u003e\nSigned-off-by: Alexander Nyberg \u003calexn@telia.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "8604affde9d4f52f04342d6a37c77d95fa167e7a", "tree": "12143c1be244c69c7c2b488a34856f60d0625e03", "parents": [ "bef9c558841604116704e10b3d9ff3dbf4939423" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@elka.pw.edu.pl", "time": "Thu May 26 14:55:34 2005 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@elka.pw.edu.pl", "time": "Thu May 26 14:55:34 2005 +0200" }, "message": "[PATCH] convert IDE device drivers to driver-model\n\n* add ide_bus_match() and export ide_bus_type\n* split ide_remove_driver_from_hwgroup() out of ide_unregister()\n* move device cleanup from ide_unregister() to drive_release_dev()\n* convert ide_driver_t-\u003ename to driver-\u003ename\n* convert ide_driver_t-\u003e{attach,cleanup} to driver-\u003e{probe,remove}\n* remove ide_driver_t-\u003ebusy as ide_bus_type-\u003esubsys.rwsem\n protects against concurrent -\u003e{probe,remove} calls\n* make ide_{un}register_driver() void as it cannot fail now\n* use driver_{un}register() directly, remove ide_{un}register_driver()\n* use device_register() instead of ata_attach(), remove ata_attach()\n* add proc_print_driver() and ide_drivers_show(), remove ide_drivers_op\n* fix ide_replace_subdriver() and move it to ide-proc.c\n* remove ide_driver_t-\u003edrives, ide_drives and drives_lock\n* remove ide_driver_t-\u003edrivers, drivers and drivers_lock\n* remove ide_drive_t-\u003edriver and DRIVER() macro\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@elka.pw.edu.pl\u003e" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }