)]}' { "log": [ { "commit": "9ff6f72f432364991d68e99cae72cb141c166e70", "tree": "e37e5dc6d1b2387f7cbc2909d5cb534d4a395a79", "parents": [ "1b5169405e50b98b2bd1e4f86c7706ea24a59193" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "message": "ide: remove hwif-\u003eautodma and drive-\u003eautodma\n\n* hpt34x.c: disable DMA masks for HPT345\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* Check noautodma global variable instead of drive-\u003eautodma in ide_tune_dma().\n\n This fixes handling of \"ide\u003dnodma\" kernel parameter for icside, ide-cris,\n au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers.\n\n* Remove hwif-\u003eautodma (it was not checked by IDE core code anyway) and\n drive-\u003eautodma (was set by all host drivers - except HPT345/TRM290 special\n cases - unless \"ide\u003dnodma\" was used).\n\nWhile at it:\n- remove needless printk() from icside.c\n- remove stale FIXME/comment from ide-probe.c\n- don\u0027t force DMA off if PCI bus-mastering had to be enabled in setup-pci.c\n (this setting was always later over-ridden by host drivers anyway)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c58e79dd44243ec919d789193ffb35a220c54695", "tree": "66b76ed3fe5dc996dcf0756e173d53f5bb017d9d", "parents": [ "9cbcc5e3c5d2d0355fed22d00762fd764c81a383" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:56 2007 +0200" }, "message": "ide: remove CONFIG_BLK_DEV_IDEDMA_FORCED\n\nThis code doesn\u0027t use pci_assign_resource() and ide_get_or_set_dma_base() uses\npci_resource_start() to get DMA base address so it has no chance of working.\nMoreover this belongs to PCI quirks (in case somebody would like to fix it).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0505b55fb51fa289027f33ae793995c191277536", "tree": "b6d4d6d7af1ce177f61e93e0fa9878c1a3199a44", "parents": [ "dc4b6fd620aec395048b2877daca87ba7bfcd5e0" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Sep 11 22:28:34 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:34 2007 +0200" }, "message": "ide: fix PCI refcounting\n\nThe IDE core never marked the PCI IDE devices as being in use after succesfull\ndriver probe call (the devices were marked in use only while being probed), and\nso was susceptible to issues caused by unsolicited PCI hotplug device removal.\nSo, add pci_dev_get() call to ide_scan_pcidev() and convert this function to\nthe kernel style, also dropping a bunch of useless curly braces from its caller,\nide_scan_pcibus() and somewhat beautifying printk() call there, while at it...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4bf9fdf7f21f118e2c5052ec8e46faf00eb5a4ea", "tree": "6d7941d54886bc78929f85c726a33756deeee2e5", "parents": [ "74565073cbf6b3c1746ee623e97b2ba0fcd3fbb6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: remove stale changelog from setup-pci.c\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4099d14322149c7a467e4997b87be4ba8eb78697", "tree": "133a913d7f9c2dacaaaef5cfdf2ae6911dc21f4c", "parents": [ "6a824c92db4d606c324272c4eed366fb71672440" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: add PIO masks\n\n* Add ATA_PIO[0-6] defines to \u003clinux/ata.h\u003e.\n\n* Add -\u003epio_mask field to ide_pci_device_t and ide_hwif_t.\n\n* Add PIO masks to host drivers.\n\n\u003clinux/ata.h\u003e change ACK-ed by Jeff Garzik \u003cjeff@garzik.org\u003e.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6a824c92db4d606c324272c4eed366fb71672440", "tree": "72b398062fd582b85507b665120f0a5315548eaf", "parents": [ "2134758d2a5429325cee4d4ce8959af5314eeba1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "message": "ide: remove ide_find_best_pio_mode()\n\n* Add -\u003ehost_flags to ide_hwif_t to store ide_pci_device_t.host_flags,\n assign it in setup-pci.c:ide_pci_setup_ports().\n\n* Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags\n and teach ide_get_best_pio_mode() about them. Also remove needless\n !drive-\u003eid check while at it (drive-\u003eid is always present).\n\n* Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode()\n and then remove no longer needed ide_find_best_pio_mode().\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a5d8c5c834d3cabf4b7b477c3f6ee923c25026fc", "tree": "19fc04470569a3c2f227d5aac3078a15ac65bb32", "parents": [ "2229833c1365346b64357a9263fa724f74f5e376" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "message": "ide: add ide_pci_device_t.host_flags (take 2)\n\n* Rename ide_pci_device_t.flags to ide_pci_device_t.host_flags\n and IDEPCI_FLAG_ISA_PORTS flag to IDE_HFLAG_ISA_PORTS.\n\n* Add IDE_HFLAG_SINGLE flag for single channel devices.\n\n* Convert core code and all IDE PCI drivers to use IDE_HFLAG_SINGLE\n and remove no longer needed ide_pci_device_t.channels field.\n\nv2:\n* Fix issues noticed by Sergei:\n - correct code alignment in scc_pata.c\n - s/IDE_HFLAG_SINGLE/~IDE_HFLAG_SINGLE/ in serverworks.c\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d61bcce9c1aa2c9f8a768d73c4c517f81d226725", "tree": "ccb6581e6fb186d615736108afc4282ebf27f6c0", "parents": [ "8006bf56e360a4db71d304df778870a371a9e930" ], "author": { "name": "Andrew Morton", "email": "akpm@linux-foundation.org", "time": "Tue Jul 03 22:28:36 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Jul 03 22:28:36 2007 +0200" }, "message": "ide: ide_scan_pcibus(): check __pci_register_driver return value\n\ndrivers/ide/setup-pci.c: In function \u0027ide_scan_pcibus\u0027:\ndrivers/ide/setup-pci.c:879: warning: ignoring return value of \u0027__pci_register_driver\u0027, declared with attribute warn_unused_result\n\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6d208b39c45edee5def6c201fcd51561c5a39828", "tree": "55645d2b6173e3161d12e5c9efdc4bd052b75b56", "parents": [ "5cbf79cdb37be2aa2a1b4fa94144526b14557060" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "message": "ide: legacy PCI bus order probing fixes\n\nIDE PCI host drivers should register themselves with IDE core only when\nIDE driver is built-in, otherwise (IDE driver is modular and thus IDE PCI\nhost drivers are also modular) the code has no effect and just complicates\nthe probing.\n\nFix it by adding new config option CONFIG_IDEPCI_PCIBUS (defined only when\nneeded and invisible to the user) and covering by #ifdef/#endif the code\nin question. It turned out that \"ide\u003dreverse\" was silently accepted but did\nnothing in case when IDE driver was modular, this is fixed now.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "5cbf79cdb37be2aa2a1b4fa94144526b14557060", "tree": "1fcfbc1248b9904e5890cc593f018ee0a8a53238", "parents": [ "869c56ee9de1b72cd3f8ab9cdfbd3601e55c61f2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "message": "ide: add ide_proc_register_port()\n\n* create_proc_ide_interfaces() tries to add /proc entries for every probed\n and initialized IDE port, replace it by ide_proc_register_port() which does\n it only for the given port (also rename destroy_proc_ide_interface() to\n ide_proc_unregister_port() for consistency)\n \n* convert {create,destroy}_proc_ide_interface[s]() users to use new functions\n\n* pmac driver depended on proc_ide_create() to add /proc port entries, fix it\n \n* au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic\n driver (CONFIG_IDE_GENERIC\u003dy) to add port /proc entries, fix them\n\n* there is now no need to add /proc entries for IDE ports in proc_ide_create()\n so don\u0027t do it\n\n* proc_ide_create() needs now to be called before drivers are probed - fix it,\n while at it make proc_ide_create() create /proc \"ide\" directory\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "120b9cfddff2e398fece07c5e127f3fdbb660441", "tree": "25b493c4674a823069cac0f4b808b917439ea1df", "parents": [ "6f5050a96c9e0521f42a3a1d676c7ad9815f62ad" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 17 21:57:41 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 17 21:57:41 2007 +0100" }, "message": "ide: remove CONFIG_IDEDMA_{ICS,PCI}_AUTO config options\n\nAll modern distributions have been setting these options to \"y\" for ages.\n(additionally \"n\" cases have been obsoleted for few years). Therefore use\nDMA by default and remove CONFIG_IDEDMA_{ICS,PCI}_AUTO (also remove no longer\nneeded CONFIG_IDEDMA_AUTO). This fixes DMA support for rare configurations\nwhere CONFIG_IDEDMA_{ICS,PCI}_AUTO was set to \"n\" but \"hdparm -d 1\" was used\nto enable DMA support and which were forced to PIO mode by \"ide: don\u0027t allow\nDMA to be enabled if CONFIG_IDEDMA_{ICS,PCI}_AUTO\u003dn\" patch. There is no\nfunctionality loss because \"ide\u003dnodma\" kernel option is still available.\n\nCc: Patrick Horn \u003cphrh@yahoo.com\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Russell King \u003crmk+lkml@arm.linux.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "725522b5453dd680412f2b6463a988e4fd148757", "tree": "45ebe3c30f974ce2311781db428cd3ba4cb4364c", "parents": [ "fe480a2675ed236af396597d9f05245c7bbd0149" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jan 15 11:50:02 2007 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Feb 07 10:37:12 2007 -0800" }, "message": "PCI: add the sysfs driver name to all modules\n\nThis adds the module name to all PCI drivers, if they are built into the\nkernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/\n\nIt also fixes up the IDE core, which was calling __pci_register_driver()\ndirectly.\n\nCc: Kay Sievers \u003ckay.sievers@suse.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "6451956a24963d3eb1655fd039762ae42ac48da7", "tree": "5432a7e8dfc0bdf3658c0f0d707b300a9351d570", "parents": [ "fc4fb2adf944d45a7f3d4d38df991c79ffdb6a43" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Sun Dec 10 02:18:53 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.osdl.org", "time": "Sun Dec 10 09:55:40 2006 -0800" }, "message": "[PATCH] ide: complete switch to pci_get\n\nThe reverse get function allows the final piece of the switching for the old\nIDE layer\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "27ac6036f31dea8117ecc525e0dbfd17b23e8c09", "tree": "9b9e2dabb6d6d5b7bd270bb01a3384cad01b049e", "parents": [ "349ae23fe7379a42973bcb1c85f7d43ec583c17d" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Tue Oct 03 01:14:24 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:08 2006 -0700" }, "message": "[PATCH] drivers/ide/: cleanups\n\n- setup-pci.c: remove the unused ide_pci_unregister_driver()\n- ide-dma.c: remove the unused EXPORT_SYMBOL_GPL(ide_in_drive_list)\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nAcked-by: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "83d7dbc4095a0c314b191c573be5fb4fa6ce0897", "tree": "0da41cd73f0dfdac778e5e415592da92db85db7a", "parents": [ "ce42f19137225d01be9388a73703df40fb7af80f" ], "author": { "name": "Matt Mackall", "email": "mpm@selenic.com", "time": "Tue Oct 03 01:14:16 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:07 2006 -0700" }, "message": "[PATCH] Make number of IDE interfaces configurable\n\nMake IDE_HWIFS configurable if EMBEDDED\n\nThis lets us lop as much as 16k off an x86 build. It\u0027s a little ugly, but\nit\u0027s dead simple. Note the fix for HWIFS \u003c 2.\n\nSizing interfaces dynamically unfortunately turns out to be pretty\nmajor surgery.\n\nadd/remove: 0/1 grow/shrink: 0/11 up/down: 0/-16182 (-16182)\nfunction old new delta\nide_hwifs 16920 1692 -15228\ninit_irq 1113 750 -363\nideprobe_init 283 138 -145\nide_pci_setup_ports 1329 1193 -136\nsave_match 85 - -85\nide_register_hw_with_fixup 367 287 -80\nide_setup 1364 1308 -56\nis_chipset_set 40 4 -36\ncreate_proc_ide_interfaces 225 205 -20\ninit_ide_data 84 67 -17\nide_probe_for_cmd640x 1198 1183 -15\nide_unregister 1452 1451 -1\n\nSigned-off-by: Matt Mackall \u003cmpm@selenic.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nAcked-by: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7", "tree": "6d98881fe91fd9583c109208d5c27131b93fa248", "parents": [ "e02169b682bc448ccdc819dc8639ed34a23cedd8" ], "author": { "name": "Jörn Engel", "email": "joern@wohnheim.fh-wedel.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "c6387a48cf5958e43c201fc27a158c328927531a", "tree": "a6c24951d6c86ac47bd3f0ba198adbfffd03291b", "parents": [ "6a76267f0e52d920e6bb6da75541e6116d7304da" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jun 20 01:21:29 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jun 20 01:21:29 2006 -0700" }, "message": "[SPARC]: Kill __irq_itoa().\n\nThis ugly hack was long overdue to die.\n\nIt was a way to print out Sparc interrupts in a more freindly format,\nsince IRQ numbers were arbitrary opaque 32-bit integers which vectored\ninto PIL levels. These 32-bit integers were not necessarily in the\n0--\u003eNR_IRQS range, but the PILs they vectored to were.\n\nThe idea now is that we will increase NR_IRQS a little bit and use a\nvirtual\u003c--\u003ereal IRQ number mapping scheme similar to PowerPC.\n\nThat makes this IRQ printing hack irrelevant, and furthermore only a\nhandful of drivers actually used __irq_itoa() making it even less\nuseful.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d3a7b202995421631f486313aacf9ab2ad48b2c8", "tree": "859f68dcc71d986ba2a9c92dacafab9eed9fae58", "parents": [ "6e89280184e4990f5ea80d2504af89b6099523c4" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Tue Apr 18 22:22:07 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Wed Apr 19 09:13:53 2006 -0700" }, "message": "[PATCH] remove the obsolete IDEPCI_FLAG_FORCE_PDC\n\nNoted by Sergei Shtylylov \u003csshtylyov@ru.mvista.com\u003e\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "c37ea218cb43c67bf1578f5e535fcc3a751018ef", "tree": "5212e8e50b3b994a82b6796e0a2df1f25c3edd59", "parents": [ "1e39dead2bfa8023bcdee4f1e5e6c933aff24e20" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri Nov 18 23:11:24 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Nov 18 23:11:24 2005 +0100" }, "message": "[PATCH] ide: make comment match reality\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "863b18f4b5e7d9e6903b353328cf6fa084dbb619", "tree": "e181466c3e7e676fa08e4bce2052ada38d98228d", "parents": [ "f8eb1005a5bdb019d2a4ff3ef8d8e8015b22afcb" ], "author": { "name": "Laurent riffard", "email": "laurent.riffard@free.fr", "time": "Thu Oct 27 23:12:54 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Nov 10 16:09:16 2005 -0800" }, "message": "[PATCH] PCI: automatically set device_driver.owner\n\nA nice feature of sysfs is that it can create the symlink from the\ndriver to the module that is contained in it.\n\nIt requires that the device_driver.owner is set, what is not the\ncase for many PCI drivers.\n\nThis patch allows pci_register_driver to set automatically the\ndevice_driver.owner for any PCI driver.\n\nCredits to Al Viro who suggested the method.\n\nSigned-off-by: Laurent Riffard \u003claurent.riffard@free.fr\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n--\n\n drivers/ide/setup-pci.c | 12 +++++++-----\n drivers/pci/pci-driver.c | 9 +++++----\n include/linux/ide.h | 3 ++-\n include/linux/pci.h | 10 ++++++++--\n 4 files changed, 22 insertions(+), 12 deletions(-)\n" }, { "commit": "2f09a7f4af131bf23c013ead89373deba1c7593c", "tree": "b6175bf457e6903aaa6b007c3d8e2facbf20e4b7", "parents": [ "b07e5eccaf512ae3209beae5cd2e3a27c92c300b" ], "author": { "name": "Matt Gillette", "email": "matt.gillette@netcell.com", "time": "Thu Aug 18 22:27:07 2005 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@elka.pw.edu.pl", "time": "Thu Aug 18 22:27:07 2005 +0200" }, "message": "[PATCH] ide: add support for Netcell Revolution to pci-ide generic driver\n\nAdds support for Netcell Revolution to pci-ide generic driver by including\nit in the list of devices matched. Includes the Revolution in the list of\nsimplex devices forced into DMA mode.\n\nSigned-off-by: Matt Gillette \u003cmatt.gillette@netcell.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@elka.pw.edu.pl\u003e" }, { "commit": "75865858971add95809c5c9cd35dc4cfba08e33b", "tree": "e8b3fe78e15696f36156d1f94d35b7711590365f", "parents": [ "299de0343c7d18448a69c635378342e9214b14af" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Jun 30 02:18:12 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Jul 01 13:35:50 2005 -0700" }, "message": "[PATCH] PCI: clean up dynamic pci id logic\n\nThe dynamic pci id logic has been bothering me for a while, and now that\nI started to look into how to move some of this to the driver core, I\nthought it was time to clean it all up.\n\nIt ends up making the code smaller, and easier to follow, and fixes a\nfew bugs at the same time (dynamic ids were not being matched\neverywhere, and so could be missed on some call paths for new devices,\nsemaphore not needed to be grabbed when adding a new id and calling the\ndriver core, etc.)\n\nI also renamed the function pci_match_device() to pci_match_id() as\nthat\u0027s what it really does.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }