)]}' { "log": [ { "commit": "011d18350f525dfdb1ccbd52019e8c04cadcc222", "tree": "bceefcd1c6e65bdaba3ff5346ae05c87ccdb88f4", "parents": [ "b1a1bcf714c4d79f7872a34138d100941ebb0a0b" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Thu Feb 17 01:50:51 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 18 16:54:55 2011 -0500" }, "message": "ssb: reset device only if it was enabled\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b1a1bcf714c4d79f7872a34138d100941ebb0a0b", "tree": "3e93caf667a9f342c5ff6d9af48e38c1b2ffa035", "parents": [ "0d4171e2153b70957fe67867420a1a24d5e4cd82" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Thu Feb 17 01:50:50 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 18 16:54:54 2011 -0500" }, "message": "ssb: when needed, reject IM input while disabling device\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8c68bd401d423c81fd4bfc19c625180528e4a5e8", "tree": "dc96f89a1a11972ac7fe716a8ec154fe22407b5a", "parents": [ "f4f314bf6fd39d85065c3fcda27bd594163abcf0" ], "author": { "name": "Michael Büsch", "email": "mb@bu3sch.de", "time": "Tue Feb 15 00:21:50 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 18 16:53:20 2011 -0500" }, "message": "ssb: Make ssb_wait_bit multi-bit safe\n\nssb_wait_bit was designed for only one-bit bitmasks.\nPeople start using it for multi-bit bitmasks. Make the \"set\" case\nis safe for this. The \"unset\" case is already safe.\n\nThis does not change behavior of the current code.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "aa3bf280dd3214db5b9e1f8cad7c5868ccbe71b7", "tree": "0161dbbda2f64705364569cf278abed4170d5cf2", "parents": [ "172c69a47675dc1ca9c7243c031d8d77701bccc0" ], "author": { "name": "Hauke Mehrtens", "email": "hauke@hauke-m.de", "time": "Sun Nov 28 12:22:52 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 02 14:37:00 2010 -0500" }, "message": "ssb: Add sysfs attributes to ssb devices\n\nMake it possible to read out the attributes, till now only show on\ndmesg, through sysfs.\n\nThis patch was some time in OpenWrt.\n\nSigned-off-by: Bernhard Loos \u003cbernhardloos@googlemail.com\u003e\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1ac71e5a35eebee60cdcf15b3980bd94498f037b", "tree": "22fa9342ccccce6a774af029ce51a526e55f8180", "parents": [ "7feabb6412ea23edd298c0fa90e5aa6733eb4a42" ], "author": { "name": "Dominik Brodowski", "email": "linux@dominikbrodowski.net", "time": "Thu Jul 29 19:27:09 2010 +0200" }, "committer": { "name": "Dominik Brodowski", "email": "linux@dominikbrodowski.net", "time": "Wed Sep 29 17:20:23 2010 +0200" }, "message": "pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device\n\npcmcia_enable_device() now replaces pcmcia_request_configuration().\nInstead of config_req_t, all necessary flags are either passed as\na parameter to pcmcia_enable_device(), or (in rare circumstances)\nset in struct pcmcia_device -\u003e flags.\n\nWith the last remaining user of include/pcmcia/cs.h gone, remove\nall references.\n\nCC: netdev@vger.kernel.org\nCC: linux-wireless@vger.kernel.org\nCC: linux-ide@vger.kernel.org\nCC: linux-usb@vger.kernel.org\nCC: laforge@gnumonks.org\nCC: linux-mtd@lists.infradead.org\nCC: alsa-devel@alsa-project.org\nCC: linux-serial@vger.kernel.org\nCC: Jiri Kosina \u003cjkosina@suse.cz\u003e\nCC: linux-scsi@vger.kernel.org\nAcked-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e (for drivers/bluetooth)\nTested-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n" }, { "commit": "1685e633b396b0f3dabbc9fa5d65dfefe6435250", "tree": "ee83e26e2468ca1518a1b065c690159e12c8def9", "parents": [ "1cfd2bda8c486ae0e7a8005354758ebb68172bca", "127c03cdbad9bd5af5d7f33bd31a1015a90cb77f" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 06 12:25:06 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 06 12:25:06 2010 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:\n pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq\n pcmcia: do not request windows if you don\u0027t need to\n pcmcia: insert PCMCIA device resources into resource tree\n pcmcia: export resource information to sysfs\n pcmcia: use struct resource for PCMCIA devices, part 2\n pcmcia: remove memreq_t\n pcmcia: move local definitions out of include/pcmcia/cs.h\n pcmcia: do not use io_req_t when calling pcmcia_request_io()\n pcmcia: do not use io_req_t after call to pcmcia_request_io()\n pcmcia: use struct resource for PCMCIA devices\n pcmcia: clean up cs.h\n pcmcia: use pcmica_{read,write}_config_byte\n pcmcia: remove cs_types.h\n pcmcia: remove unused flag, simplify headers\n pcmcia: remove obsolete CS_EVENT_ definitions\n pcmcia: split up central event handler\n pcmcia: simplify event callback\n pcmcia: remove obsolete ioctl\n\nConflicts in:\n - drivers/staging/comedi/drivers/*\n - drivers/staging/wlags49_h2/wl_cs.c\ndue to dev_info_t and whitespace changes\n" }, { "commit": "ac8b422838046ffc26be4874a3cbae0d313f4209", "tree": "936c8fc9a45ca7a2973c878fc0e20bbae288e5f0", "parents": [ "ce3f9d71bd9c4268698109ad425625a2a8f51e22" ], "author": { "name": "Dominik Brodowski", "email": "linux@dominikbrodowski.net", "time": "Wed Jul 21 22:38:13 2010 +0200" }, "committer": { "name": "Dominik Brodowski", "email": "linux@dominikbrodowski.net", "time": "Fri Jul 30 21:07:39 2010 +0200" }, "message": "pcmcia: remove cs_types.h\n\nRemove cs_types.h which is no longer needed: Most definitions aren\u0027t\nused at all, a few can be made away with, and two remaining definitions\n(typedefs, unfortunatley) may be moved to more specific places.\n\nCC: linux-ide@vger.kernel.org\nCC: linux-usb@vger.kernel.org\nCC: laforge@gnumonks.org\nCC: linux-mtd@lists.infradead.org\nCC: alsa-devel@alsa-project.org\nCC: linux-serial@vger.kernel.org\nAcked-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e (for drivers/bluetooth/)\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n" }, { "commit": "467429b475e56f154f93b3b14fd75f238d14597a", "tree": "8c12b9b8aee222e55852659ef3f753e73084339b", "parents": [ "39a6f4bce6b437046edf042f78f7a0529e253bff" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Thu Jun 03 19:37:44 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 04 16:00:42 2010 -0400" }, "message": "ssb: remove the ssb DMA API\n\nNow they are unnecessary. We can use the generic DMA API with any bus.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: Michael Buesch \u003cmb@bu3sch.de\u003e\nCc: Gary Zambrano \u003czambrano@broadcom.com\u003e\nCc: Stefano Brivio \u003cstefano.brivio@polimi.it\u003e\nCc: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: John W. Linville \u003clinville@tuxdriver.com\u003e\nCc: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "14f92952bf74a365ca7f9dfbec158e7c933ea723", "tree": "2b20d91f7c37ecdb6d13034366ddecb8526c31c1", "parents": [ "2e724443f328cca90aa3b62d65852a5d7f5223f7" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Thu Jun 03 19:37:27 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 04 16:00:41 2010 -0400" }, "message": "ssb: add dma_dev to ssb_device structure\n\nAdd dma_dev, a pointer to struct device, to struct ssb_device. We pass it\nto the generic DMA API with SSB_BUSTYPE_PCI and SSB_BUSTYPE_SSB.\nssb_devices_register() sets up it properly.\n\nThis is preparation for replacing the ssb bus specific DMA API (ssb_dma_*)\nwith the generic DMA API.\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nAcked-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nCc: Gary Zambrano \u003czambrano@broadcom.com\u003e\nCc: Stefano Brivio \u003cstefano.brivio@polimi.it\u003e\nCc: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: John W. Linville \u003clinville@tuxdriver.com\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f8965467f366fd18f01feafb5db10512d7b4422c", "tree": "3706a9cd779859271ca61b85c63a1bc3f82d626e", "parents": [ "a26272e5200765691e67d6780e52b32498fdb659", "2ec8c6bb5d8f3a62a79f463525054bae1e3d4487" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 21:04:44 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 20 21:04:44 2010 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)\n qlcnic: adding co maintainer\n ixgbe: add support for active DA cables\n ixgbe: dcb, do not tag tc_prio_control frames\n ixgbe: fix ixgbe_tx_is_paused logic\n ixgbe: always enable vlan strip/insert when DCB is enabled\n ixgbe: remove some redundant code in setting FCoE FIP filter\n ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp\n ixgbe: fix header len when unsplit packet overflows to data buffer\n ipv6: Never schedule DAD timer on dead address\n ipv6: Use POSTDAD state\n ipv6: Use state_lock to protect ifa state\n ipv6: Replace inet6_ifaddr-\u003edead with state\n cxgb4: notify upper drivers if the device is already up when they load\n cxgb4: keep interrupts available when the ports are brought down\n cxgb4: fix initial addition of MAC address\n cnic: Return SPQ credit to bnx2x after ring setup and shutdown.\n cnic: Convert cnic_local_flags to atomic ops.\n can: Fix SJA1000 command register writes on SMP systems\n bridge: fix build for CONFIG_SYSFS disabled\n ARCNET: Limit com20020 PCI ID matches for SOHARD cards\n ...\n\nFix up various conflicts with pcmcia tree drivers/net/\n{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and\nwireless/orinoco/spectrum_cs.c} and feature removal\n(Documentation/feature-removal-schedule.txt).\n\nAlso fix a non-content conflict due to pm_qos_requirement getting\nrenamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c\n" }, { "commit": "eb14120f743d29744d9475bffec56ff4ad43a749", "tree": "56857094d2b0cfc0ecbd1685f18d6edbe78e140f", "parents": [ "a7debe789dfcaee9c4d81e5738b0be8c5d93930b" ], "author": { "name": "Dominik Brodowski", "email": "linux@dominikbrodowski.net", "time": "Sun Mar 07 12:21:16 2010 +0100" }, "committer": { "name": "Dominik Brodowski", "email": "linux@dominikbrodowski.net", "time": "Mon May 10 10:23:13 2010 +0200" }, "message": "pcmcia: re-work pcmcia_request_irq()\n\nInstead of the old pcmcia_request_irq() interface, drivers may now\nchoose between:\n\n- calling request_irq/free_irq directly. Use the IRQ from *p_dev-\u003eirq.\n\n- use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will\n clean up automatically on calls to pcmcia_disable_device() or\n device ejection.\n\n- drivers still not capable of IRQF_SHARED (or not telling us so) may\n use the deprecated pcmcia_request_exclusive_irq() for the time\n being; they might receive a shared IRQ nonetheless.\n\nCC: linux-bluetooth@vger.kernel.org\nCC: netdev@vger.kernel.org\nCC: linux-wireless@vger.kernel.org\nCC: linux-serial@vger.kernel.org\nCC: alsa-devel@alsa-project.org\nCC: linux-usb@vger.kernel.org\nCC: linux-ide@vger.kernel.org\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n" }, { "commit": "83163244f845c296a118ce85c653872dbff6abfe", "tree": "ce2eac695a1c198f23d537e20ed86c16ece21f7e", "parents": [ "0a12761bcd5646691c5d16dd93df84d1b8849285", "adfba3c7c026a6a5560d2a43fefc9b198cb74462" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 05 16:14:16 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 05 16:14:16 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/libertas_tf/cmd.c\n\tdrivers/net/wireless/libertas_tf/main.c\n" }, { "commit": "ce9626eae243b788993fedc03f30e2d1cb178c7a", "tree": "a5df81baa2cc680bd71b35c2d840b1dc914e7521", "parents": [ "5a673964266438784b4ebf65ee07970cde61ab5e" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Fri Apr 23 13:17:21 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 26 14:21:23 2010 -0400" }, "message": "ssb: Make bus registration failure not be silent\n\nIn kernel Bugzilla #15825, a case where routine ssb_bus_pcibus_register()\nfails silently is reported. The cause for the failure is still being\ninvestigated; however, the diagnosis would be easier if the failure\nhad been reported.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5a0e3ad6af8660be21ca98a971cd00f331318c05", "tree": "5bfb7be11a03176a87296a43ac6647975c00a1d1", "parents": [ "ed391f4ebf8f701d3566423ce8f17e614cde9806" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Wed Mar 24 17:04:11 2010 +0900" }, "committer": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Tue Mar 30 22:02:32 2010 +0900" }, "message": "include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h\n\npercpu.h is included by sched.h and module.h and thus ends up being\nincluded when building most .c files. percpu.h includes slab.h which\nin turn includes gfp.h making everything defined by the two files\nuniversally available and complicating inclusion dependencies.\n\npercpu.h -\u003e slab.h dependency is about to be removed. Prepare for\nthis change by updating users of gfp and slab facilities include those\nheaders directly instead of assuming availability. As this conversion\nneeds to touch large number of source files, the following script is\nused as the basis of conversion.\n\n http://userweb.kernel.org/~tj/misc/slabh-sweep.py\n\nThe script does the followings.\n\n* Scan files for gfp and slab usages and update includes such that\n only the necessary includes are there. ie. if only gfp is used,\n gfp.h, if slab is used, slab.h.\n\n* When the script inserts a new include, it looks at the include\n blocks and try to put the new include such that its order conforms\n to its surrounding. It\u0027s put in the include block which contains\n core kernel includes, in the same order that the rest are ordered -\n alphabetical, Christmas tree, rev-Xmas-tree or at the end if there\n doesn\u0027t seem to be any matching order.\n\n* If the script can\u0027t find a place to put a new include (mostly\n because the file doesn\u0027t have fitting include block), it prints out\n an error message indicating which .h file needs to be added to the\n file.\n\nThe conversion was done in the following steps.\n\n1. The initial automatic conversion of all .c files updated slightly\n over 4000 files, deleting around 700 includes and adding ~480 gfp.h\n and ~3000 slab.h inclusions. The script emitted errors for ~400\n files.\n\n2. Each error was manually checked. Some didn\u0027t need the inclusion,\n some needed manual addition while adding it to implementation .h or\n embedding .c file was more appropriate for others. This step added\n inclusions to around 150 files.\n\n3. The script was run again and the output was compared to the edits\n from #2 to make sure no file was left behind.\n\n4. Several build tests were done and a couple of problems were fixed.\n e.g. lib/decompress_*.c used malloc/free() wrappers around slab\n APIs requiring slab.h to be added manually.\n\n5. The script was run on all .h files but without automatically\n editing them as sprinkling gfp.h and slab.h inclusions around .h\n files could easily lead to inclusion dependency hell. Most gfp.h\n inclusion directives were ignored as stuff from gfp.h was usually\n wildly available and often used in preprocessor macros. Each\n slab.h inclusion directive was examined and added manually as\n necessary.\n\n6. percpu.h was updated not to include slab.h.\n\n7. Build test were done on the following configurations and failures\n were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my\n distributed build env didn\u0027t work with gcov compiles) and a few\n more options had to be turned off depending on archs to make things\n build (like ipr on powerpc/64 which failed due to missing writeq).\n\n * x86 and x86_64 UP and SMP allmodconfig and a custom test config.\n * powerpc and powerpc64 SMP allmodconfig\n * sparc and sparc64 SMP allmodconfig\n * ia64 SMP allmodconfig\n * s390 SMP allmodconfig\n * alpha SMP allmodconfig\n * um on x86_64 SMP allmodconfig\n\n8. percpu.h modifications were reverted so that it could be applied as\n a separate patch and serve as bisection point.\n\nGiven the fact that I had only a couple of failures from tests on step\n6, I\u0027m fairly confident about the coverage of this conversion patch.\nIf there is a breakage, it\u0027s likely to be something in one of the arch\nheaders which should be easily discoverable easily on most builds of\nthe specific arch.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nGuess-its-ok-by: Christoph Lameter \u003ccl@linux-foundation.org\u003e\nCc: Ingo Molnar \u003cmingo@redhat.com\u003e\nCc: Lee Schermerhorn \u003cLee.Schermerhorn@hp.com\u003e\n" }, { "commit": "391ae22ae5726d2a8cebfa62879635c54a349642", "tree": "090730f2457712f085cc51d2e3c540072e183ea2", "parents": [ "b6c3f5be7c6ac3375f44de4545c1ffe216b34022" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Wed Feb 03 18:24:35 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Feb 03 16:55:20 2010 -0500" }, "message": "ssb: Fix CONFIG_SSB_SDIOHOST typo\n\nThis fixes a CONFIG_SSB_SDIOHOST typo.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nReported-by: Christoph Egger \u003csiccegge@stud.informatik.uni-erlangen.de\u003e\nTested-By: Albert Herranz \u003calbert_herranz@yahoo.es\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3ba6018aa314559c5867138a8173b068268a70db", "tree": "6da72b198ec84c40a52b21545b5be3a4b1bd4c74", "parents": [ "77593ae28c4c134eaf28ef34ecac3cd4464ecd6e" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Mon Nov 23 20:12:13 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 23 17:05:41 2009 -0500" }, "message": "ssb: Fix SPROM writing\n\nThe SPROM writing routines were broken since we rewrote the suspend\nhandling on wireless devices, because SPROM writing depended on suspend.\n\nThis patch changes it and freezes devices with the driver remove(), probe()\ncallbacks instead. This also simplifies the whole logics a lot.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24ea602e183ca20a7577ebe253323d0e5d0f9847", "tree": "9cd9c0b3832cac2f155e633fbed1ce2bf3331f9a", "parents": [ "f020979d5d7c9816c071d0aedf60a889fa4fae40" ], "author": { "name": "Albert Herranz", "email": "albert_herranz@yahoo.es", "time": "Tue Sep 08 19:30:12 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:19:00 2009 -0400" }, "message": "ssb: Implement SDIO host bus support\n\nAdd support for communicating with a Sonics Silicon Backplane through a\nSDIO interface, as found in the Nintendo Wii WLAN daughter card.\n\nThe Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with\na SDIO host interface.\n\nSigned-off-by: Albert Herranz \u003calbert_herranz@yahoo.es\u003e\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e6c463e3a3d067f5da2c79d5acdb2f626754cdb3", "tree": "c469a4411d61f47b4b24387a9d3d87c68648ecd6", "parents": [ "69eddc8a37a33479205ac3a3d8575fad1466da90" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Sat Sep 05 11:18:47 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:08 2009 -0400" }, "message": "ssb: Fail ssb modinit, if attach of the buses failed.\n\nSSB modinit should not succeed, if busattach failed.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b7b05fe7f92e21e933caa529fd8d78bbbbfbd293", "tree": "41575e92078ffd4287bbf735799b803193222b4c", "parents": [ "582c1b538fb47a2d6a41dbdadb031086c49446c1" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Thu Oct 30 15:51:57 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 21 11:06:03 2008 -0500" }, "message": "ssb: struct device - replace bus_id with dev_name(), dev_set_name()\n\nThis patch is part of a larger patch series which will remove\nthe \"char bus_id[20]\" name string from struct device. The device\nname is managed in the kobject anyway, and without any size\nlimitation, and just needlessly copied into \"struct device\".\n\nTo set and read the device name dev_name(dev) and dev_set_name(dev)\nmust be used. If your code uses static kobjects, which it shouldn\u0027t\ndo, \"const char *init_name\" can be used to statically provide the\nname the registered device should have. At registration time, the\ninit_name field is cleared, to enforce the use of dev_name(dev) to\naccess the device name at a later time.\n\nWe need to get rid of all occurrences of bus_id in the entire tree\nto be able to enable the new interface. Please apply this patch,\nand possibly convert any remaining remaining occurrences of bus_id.\n\nWe want to submit a patch to -next, which will remove bus_id from\n\"struct device\", to find the remaining pieces to convert, and finally\nswitch over to the new api, which will remove the 20 bytes array\nand does no longer have a size limitation.\n\nCC: Michael Buesch \u003cmb@bu3sch.de\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-Off-By: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ac82da3381fc663dbda31612a0bff60bc41676a3", "tree": "7e9f68ab045ecbe9a47f29ca87bac4b475b4132a", "parents": [ "2dc42b47a7886bdc87514990c68ecdf8de61e653" ], "author": { "name": "Aurelien Jarno", "email": "aurelien@aurel32.net", "time": "Fri Sep 26 22:27:11 2008 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Sat Sep 27 15:45:37 2008 +0100" }, "message": "[SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices\n\nFor SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using\ncoherent_dma_mask so that calls to dma_set_mask() succeed.\n\nIt fixes the regression on the b44 driver introduced by commit\nf225763a7d6c92c4932dbd528437997078496fcc\n\nSigned-off-by: Aurelien Jarno \u003caurelien@aurel32.net\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "7f37441c21d3ae9fec47ef418ccafb2823d12a27", "tree": "6d88b0f17c414d0795e698ec2758102ca376cf9a", "parents": [ "e10e0dfe3ba358cfb442cc3bf0d3f2068785bf5c" ], "author": { "name": "Holger Schurig", "email": "hs4233@mail.mn-solutions.de", "time": "Thu Aug 07 18:24:12 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 18 11:05:13 2008 -0400" }, "message": "ssb: allow compilation on systems without PCI\n\nMakes ssb work on system without a PCI bus.\n\nSigned-off-by: Holger Schurig \u003chs4233@mail.mn-solutions.de\u003e\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f225763a7d6c92c4932dbd528437997078496fcc", "tree": "5d787c7c0bdabcf72e98603a85672ebe95a3682e", "parents": [ "316af76f3475bb73dbb11f1c6d549ae589efb3d0" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Jun 20 11:50:29 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 27 09:09:15 2008 -0400" }, "message": "ssb, b43, b43legacy, b44: Rewrite SSB DMA API\n\nThis is a rewrite of the DMA API for SSB devices.\nThis is needed, because the old (non-existing) \"API\" made too many bad\nassumptions on the API of the host-bus (PCI).\nThis introduces an almost complete SSB-DMA-API that maps to the lowlevel\nbus-API based on the bustype.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e6340361f9c70e84312caed98c6e058ac6234e9b", "tree": "4c7266a523fd44a25f4f8df8df8fc18817a521da", "parents": [ "6847aa5cce6e22c3625a243b02909ac46aafa110" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Thu Jun 12 15:33:13 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 13 16:14:52 2008 -0400" }, "message": "ssb: Fix coherent DMA mask for PCI devices\n\nThis fixes setting the coherent DMA mask for PCI devices.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1e42198609d73ed1a9adcba2af275c24c2678420", "tree": "32fd4d9073bfc0f3909af8f9fb4bcff38951d01a", "parents": [ "794eb6bf20ebf992c040ea831cd3a9c64b0c1f7a", "4b119e21d0c66c22e8ca03df05d9de623d0eb50f" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 17 23:56:30 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 17 23:56:30 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6\n" }, { "commit": "4ac58469f13028e1eb97f8bc7b0fca5072591d8d", "tree": "c955e1b753e1f86c570d2d6f5f6095d1182d5c35", "parents": [ "2d4543fdb487b1301ae48703dea3e66ead2d3c75" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Apr 11 11:59:00 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 15 15:04:35 2008 -0400" }, "message": "ssb: Fix usage of struct device used for DMAing\n\nThis fixes DMA on architectures where DMA is nontrivial, like PPC64.\nWe must use the host-device\u0027s (PCI) struct device for any DMA\noperation instead of the SSB device. For this we add a new\nstruct device pointer to the SSB device structure that will always\npoint to the right device for DMAing.\n\nWithout this patch b43 and b44 drivers won\u0027t work on complex-DMA\narchitectures, that for example need dev-\u003earchdata for DMA operations.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "df39e8ba56a788733d369068c7319e04b1da3cd5", "tree": "1e9be853bdb455e341cdbf957656f342cfa2eb9e", "parents": [ "f5572855ec492334d8c3ec0e0e86c31865d5cf07", "159d83363b629c91d020734207c1bc788b96af5a" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 14 02:30:23 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 14 02:30:23 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tdrivers/net/ehea/ehea_main.c\n\tdrivers/net/wireless/iwlwifi/Kconfig\n\tdrivers/net/wireless/rt2x00/rt61pci.c\n\tnet/ipv4/inet_timewait_sock.c\n\tnet/ipv6/raw.c\n\tnet/mac80211/ieee80211_sta.c\n" }, { "commit": "d625a29ba649a4df6027520ffc378f23c0e6883e", "tree": "07b895d38717e24e655948c963f4287f551df42f", "parents": [ "93af2614513103216038afa708718295e7016dbb" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Wed Apr 02 19:46:56 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 08 16:44:40 2008 -0400" }, "message": "ssb: Add support for block-I/O\n\nThis adds support for block based I/O to SSB.\nThis is needed in order to efficiently support PIO data\ntransfers to the card.\nThe block-I/O support is only compiled, if it\u0027s selected by the\nweird driver that needs it. So there\u0027s no overhead for sane devices.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d72bb40fe38608fcf7870b4d768e4416502b23b5", "tree": "d20e340408709b918c55687c9d53caa6d72268d8", "parents": [ "fb14a7e0860ef8b19d0dd61be96e23eacb4da129" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Wed Apr 02 17:03:26 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 08 16:44:40 2008 -0400" }, "message": "ssb: Fix build for non-PCIhost\n\nThis fixes a build error when PCMCIA-host support is built,\nbut PCI-host support is disabled.\nHell, who on earth would use such a weird configuration. :D\n\ndrivers/built-in.o: In function `ssb_attr_sprom_store\u0027:\n(.text+0x1c4b79): undefined reference to `ssb_devices_freeze\u0027\ndrivers/built-in.o: In function `ssb_attr_sprom_store\u0027:\n(.text+0x1c4bb3): undefined reference to `ssb_devices_thaw\u0027\nmake[1]: *** [.tmp_vmlinux1] Error 1\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nAcked-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8fe2b65a18e49bfde56a59ed4ab3fc7aa0c2f325", "tree": "a813fe635b7a8c248c586de847d1501c4ccaab6b", "parents": [ "5100d5ac81b9330dc57e35adbe50923ba6107b8f" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Sun Mar 30 00:10:50 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 08 15:05:57 2008 -0400" }, "message": "ssb: Turn suspend/resume upside down\n\nTurn the SSB bus suspend mechanism upside down.\nInstead of deciding by an internal reference count when to suspend/resume,\nlet the parent bus call us in their suspend/resume routine.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9788ba7500c3a6268ceb63296a0f37f34d450beb", "tree": "1b4a4a960acafa93e081502afb5207cf66506bae", "parents": [ "247367016305637fb981db020679520e354c80c4" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Mar 28 10:34:55 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 08 15:05:56 2008 -0400" }, "message": "ssb-pcmcia: IRQ and DMA related fixes\n\nHere come some IRQ and DMA related fixes for the ssb PCMCIA-host code.\nNot much to say, actually. I think the patch explains itself.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "881400a20c3551e90eed1062cf0387fa686a2fd0", "tree": "0b88fd39614a84a51bbb8430749092f1e5ed162f", "parents": [ "7981a35ed0f64ca49b1a0c0acecbc9b644a8a2e3" ], "author": { "name": "Stefano Brivio", "email": "stefano.brivio@polimi.it", "time": "Sun Apr 06 17:05:07 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 07 22:19:29 2008 -0400" }, "message": "b43legacy: fix bcm4303 crash\n\nThis fixes an hard crash which happened upon driver loading on bcm4303 rev.\n2 devices.\n\nSigned-off-by: Stefano Brivio \u003cstefano.brivio@polimi.it\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e7ec2e3230633a858af1b0b359f6c4670dbeb997", "tree": "c43dbd7f6cab0ac066c039697528312d802617ef", "parents": [ "068edceb7e73c05f77e204442ea8f86e238575da" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Mon Mar 10 17:26:32 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Mar 13 19:32:32 2008 -0400" }, "message": "ssb: Add SPROM/invariants support for PCMCIA devices\n\nThis adds support for reading/writing the SPROM invariants\nfor PCMCIA based devices.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "aab547ce0d1493d400b6468c521a0137cd8c1edf", "tree": "84625da40d905669a28a5770de111225667d5f27", "parents": [ "69d3b6f491545d326135a1def4e290cd577c9a36" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Feb 29 11:36:12 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Mar 06 17:09:43 2008 -0500" }, "message": "ssb: Add Gigabit Ethernet driver\n\nThis adds the Gigabit Ethernet driver for the SSB\nGigabit Ethernet core. This driver actually is a frontend to\nthe Tigon3 driver. So the real work is done by tg3.\nThis device is used in the Linksys WRT350N.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ffc7689ddae5cbe12bde437ae0f2b386d568b5cd", "tree": "638e7dcf083c88cf45763953aa244504d357a220", "parents": [ "004c872e78d433f84f0a5cd4db7a6c780c0946e1" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Wed Feb 20 19:08:10 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 29 15:37:26 2008 -0500" }, "message": "ssb: Add support for 8bit register access\n\nThis adds support for 8bit wide register reads/writes.\nThis is needed in order to support the gigabit ethernet core.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7cb4461520f307a6e3fb2bb32cb8daee45aa1fae", "tree": "24d287cb729e511285465456cdd0ec02805e9130", "parents": [ "53521d8c90d366191b6c134f88a8ebe83de60614" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Tue Feb 19 17:46:48 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Feb 20 20:11:49 2008 -0500" }, "message": "ssb: Fix pcicore cardbus mode\n\nThis fixes the pcicore driver to not die a horrible\ncrash death when inserting a cardbus card.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "53521d8c90d366191b6c134f88a8ebe83de60614", "tree": "2d4b8bed0db743927586389ab035aab816d22f36", "parents": [ "c2bcbe65fc88d61f9a806367ff6eab76c9eabb3a" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Tue Feb 19 16:22:50 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Feb 20 20:11:49 2008 -0500" }, "message": "ssb: Make the GPIO API reentrancy safe\n\nThis fixes the GPIO API to be reentrancy safe.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c272ef4403c271799a7f09a4ab7a236c86643843", "tree": "8f2baf9c11159044b42233cea56aa5a62dcd7500", "parents": [ "ac82fab44f6b981e3f6b53784e2f23838f4908e1" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Fri Nov 09 16:56:25 2007 -0600" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jan 28 15:04:41 2008 -0800" }, "message": "ssb: Convert to use of the new SPROM structure\n\nIn disagreement with the SPROM specs, revision 3 devices appear to have\nmoved the MAC address.\n\nChange ssb to handle the revision 4 SPROM, which is a different size.\nThis change in size is handled by adding a new variable to the ssb_sprom\nstruct and using it whenever possible. For those routines that do not\nhave access to this structure, a \u0027u16 size\u0027 argument is added.\n\nThe new PCI_ID for the BCM4328 is also added.\n\nTesting of the Revision 4 SPROM, which is used on the BCM4328, was done\nby Michael Gerdau \u003cmgerdau@tiscali.de\u003e.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "60d78c4473493674531a1df0772ca9e4d6133a62", "tree": "6aa49f29e15f4d71b05fd2a6dca5db213434671a", "parents": [ "d52a60ad389d8aeac162350b19e4303c6cde7f93" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Wed Nov 07 19:03:35 2007 +0100" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sat Nov 10 22:01:53 2007 -0800" }, "message": "ssb: Fix PCMCIA-host lowlevel bus access\n\nThis fixes the lowlevel bus access routines for\nPCMCIA based devices.\n\nThere are still a few issues with register access sideeffects after\nthis patch. This will be addressed in a later patch.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8d8c90e3fd1f8895f6d48bdcb34ba69a1fe73616", "tree": "d9cc15d752e21f95a6ed01f7c81c2cc27562a427", "parents": [ "94e10bfb8a7372df3ef2759c9ec2a37de2f24aca" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Sat Oct 27 15:14:39 2007 +0200" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sat Nov 10 21:58:58 2007 -0800" }, "message": "ssb: Fix initcall ordering\n\nssb must init after PCI but before the ssb drivers.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nCc: Christian Casteyde \u003ccasteyde.christian@free.fr\u003e\nFixes-bug: #9219\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7ac0326c3fd3f7cd2426dbbce896a0f8c91b962f", "tree": "9adb34ab779412430774a15e6efe9e8db5b8cd67", "parents": [ "4735b37cf434175c2b7b36b3b68f1e60e8ec8527" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Sun Oct 14 05:46:09 2007 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Oct 14 08:53:33 2007 -0700" }, "message": "uevent environment changes fallout\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6faf035cf9fdd8283c2b2b2c34b76b5445ec6fc4", "tree": "261989dd368c841043fd94c46e8fb112d9478f73", "parents": [ "50e36ebe65ff1b96e35a703fab28314ee4f984f7" ], "author": { "name": "Geert Uytterhoeven", "email": "geert@linux-m68k.org", "time": "Sat Oct 13 14:31:31 2007 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sat Oct 13 09:41:03 2007 -0700" }, "message": "ssb bus needs \u003clinux/io.h\u003e\n\nssb bus needs \u003clinux/io.h\u003e\n\n linux/drivers/ssb/main.c: In function \u0027ssb_ssb_read16\u0027:\n linux/drivers/ssb/main.c:518: error: implicit declaration of function \u0027readw\u0027\n linux/drivers/ssb/main.c: In function \u0027ssb_ssb_read32\u0027:\n linux/drivers/ssb/main.c:526: error: implicit declaration of function \u0027readl\u0027\n linux/drivers/ssb/main.c: In function \u0027ssb_ssb_write16\u0027:\n linux/drivers/ssb/main.c:534: error: implicit declaration of function \u0027writew\u0027\n linux/drivers/ssb/main.c: In function \u0027ssb_ssb_write32\u0027:\n linux/drivers/ssb/main.c:542: error: implicit declaration of function \u0027writel\u0027\n\nSigned-off-by: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "61e115a56d1aafd6e6a8a9fee8ac099a6128ac7b", "tree": "add97bf6a1207a4caea3a86cf13495ad3dc477de", "parents": [ "5ee3afba88f5a79d0bff07ddd87af45919259f91" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Tue Sep 18 15:12:50 2007 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:51:36 2007 -0700" }, "message": "[SSB]: add Sonics Silicon Backplane bus support\n\nSSB is an SoC bus used in a number of embedded devices. The most\nwell-known of these devices is probably the Linksys WRT54G, but there\nare others as well. The bus is also used internally on the BCM43xx\nand BCM44xx devices from Broadcom.\n\nThis patch also includes support for SSB ID tables in modules, so\nthat SSB drivers can be loaded automatically.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" } ] }